| /* |
| * linux/drivers/sound/vidc.c |
| * |
| * Copyright (C) 1997-2000 by Russell King <rmk@arm.linux.org.uk> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * VIDC20 audio driver. |
| * |
| * The VIDC20 sound hardware consists of the VIDC20 itself, a DAC and a DMA |
| * engine. The DMA transfers fixed-format (16-bit little-endian linear) |
| * samples to the VIDC20, which then transfers this data serially to the |
| * DACs. The samplerate is controlled by the VIDC. |
| * |
| * We currently support a mixer device, but it is currently non-functional. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| |
| #include <mach/hardware.h> |
| #include <asm/dma.h> |
| #include <asm/io.h> |
| #include <asm/hardware/iomd.h> |
| #include <asm/irq.h> |
| #include <asm/system.h> |
| |
| #include "sound_config.h" |
| #include "vidc.h" |
| |
| #ifndef _SIOC_TYPE |
| #define _SIOC_TYPE(x) _IOC_TYPE(x) |
| #endif |
| #ifndef _SIOC_NR |
| #define _SIOC_NR(x) _IOC_NR(x) |
| #endif |
| |
| #define VIDC_SOUND_CLOCK (250000) |
| #define VIDC_SOUND_CLOCK_EXT (176400) |
| |
| /* |
| * When using SERIAL SOUND mode (external DAC), the number of physical |
| * channels is fixed at 2. |
| */ |
| static int vidc_busy; |
| static int vidc_adev; |
| static int vidc_audio_rate; |
| static char vidc_audio_format; |
| static char vidc_audio_channels; |
| |
| static unsigned char vidc_level_l[SOUND_MIXER_NRDEVICES] = { |
| 85, /* master */ |
| 50, /* bass */ |
| 50, /* treble */ |
| 0, /* synth */ |
| 75, /* pcm */ |
| 0, /* speaker */ |
| 100, /* ext line */ |
| 0, /* mic */ |
| 100, /* CD */ |
| 0, |
| }; |
| |
| static unsigned char vidc_level_r[SOUND_MIXER_NRDEVICES] = { |
| 85, /* master */ |
| 50, /* bass */ |
| 50, /* treble */ |
| 0, /* synth */ |
| 75, /* pcm */ |
| 0, /* speaker */ |
| 100, /* ext line */ |
| 0, /* mic */ |
| 100, /* CD */ |
| 0, |
| }; |
| |
| static unsigned int vidc_audio_volume_l; /* left PCM vol, 0 - 65536 */ |
| static unsigned int vidc_audio_volume_r; /* right PCM vol, 0 - 65536 */ |
| |
| extern void vidc_update_filler(int bits, int channels); |
| extern int softoss_dev; |
| |
| static void |
| vidc_mixer_set(int mdev, unsigned int level) |
| { |
| unsigned int lev_l = level & 0x007f; |
| unsigned int lev_r = (level & 0x7f00) >> 8; |
| unsigned int mlev_l, mlev_r; |
| |
| if (lev_l > 100) |
| lev_l = 100; |
| if (lev_r > 100) |
| lev_r = 100; |
| |
| #define SCALE(lev,master) ((lev) * (master) * 65536 / 10000) |
| |
| mlev_l = vidc_level_l[SOUND_MIXER_VOLUME]; |
| mlev_r = vidc_level_r[SOUND_MIXER_VOLUME]; |
| |
| switch (mdev) { |
| case SOUND_MIXER_VOLUME: |
| case SOUND_MIXER_PCM: |
| vidc_level_l[mdev] = lev_l; |
| vidc_level_r[mdev] = lev_r; |
| |
| vidc_audio_volume_l = SCALE(lev_l, mlev_l); |
| vidc_audio_volume_r = SCALE(lev_r, mlev_r); |
| /*printk("VIDC: PCM vol %05X %05X\n", vidc_audio_volume_l, vidc_audio_volume_r);*/ |
| break; |
| } |
| #undef SCALE |
| } |
| |
| static int vidc_mixer_ioctl(int dev, unsigned int cmd, void __user *arg) |
| { |
| unsigned int val; |
| unsigned int mdev; |
| |
| if (_SIOC_TYPE(cmd) != 'M') |
| return -EINVAL; |
| |
| mdev = _SIOC_NR(cmd); |
| |
| if (_SIOC_DIR(cmd) & _SIOC_WRITE) { |
| if (get_user(val, (unsigned int __user *)arg)) |
| return -EFAULT; |
| |
| if (mdev < SOUND_MIXER_NRDEVICES) |
| vidc_mixer_set(mdev, val); |
| else |
| return -EINVAL; |
| } |
| |
| /* |
| * Return parameters |
| */ |
| switch (mdev) { |
| case SOUND_MIXER_RECSRC: |
| val = 0; |
| break; |
| |
| case SOUND_MIXER_DEVMASK: |
| val = SOUND_MASK_VOLUME | SOUND_MASK_PCM | SOUND_MASK_SYNTH; |
| break; |
| |
| case SOUND_MIXER_STEREODEVS: |
| val = SOUND_MASK_VOLUME | SOUND_MASK_PCM | SOUND_MASK_SYNTH; |
| break; |
| |
| case SOUND_MIXER_RECMASK: |
| val = 0; |
| break; |
| |
| case SOUND_MIXER_CAPS: |
| val = 0; |
| break; |
| |
| default: |
| if (mdev < SOUND_MIXER_NRDEVICES) |
| val = vidc_level_l[mdev] | vidc_level_r[mdev] << 8; |
| else |
| return -EINVAL; |
| } |
| |
| return put_user(val, (unsigned int __user *)arg) ? -EFAULT : 0; |
| } |
| |
| static unsigned int vidc_audio_set_format(int dev, unsigned int fmt) |
| { |
| switch (fmt) { |
| default: |
| fmt = AFMT_S16_LE; |
| case AFMT_U8: |
| case AFMT_S8: |
| case AFMT_S16_LE: |
| vidc_audio_format = fmt; |
| vidc_update_filler(vidc_audio_format, vidc_audio_channels); |
| case AFMT_QUERY: |
| break; |
| } |
| return vidc_audio_format; |
| } |
| |
| #define my_abs(i) ((i)<0 ? -(i) : (i)) |
| |
| static int vidc_audio_set_speed(int dev, int rate) |
| { |
| if (rate) { |
| unsigned int hwctrl, hwrate, hwrate_ext, rate_int, rate_ext; |
| unsigned int diff_int, diff_ext; |
| unsigned int newsize, new2size; |
| |
| hwctrl = 0x00000003; |
| |
| /* Using internal clock */ |
| hwrate = (((VIDC_SOUND_CLOCK * 2) / rate) + 1) >> 1; |
| if (hwrate < 3) |
| hwrate = 3; |
| if (hwrate > 255) |
| hwrate = 255; |
| |
| /* Using exernal clock */ |
| hwrate_ext = (((VIDC_SOUND_CLOCK_EXT * 2) / rate) + 1) >> 1; |
| if (hwrate_ext < 3) |
| hwrate_ext = 3; |
| if (hwrate_ext > 255) |
| hwrate_ext = 255; |
| |
| rate_int = VIDC_SOUND_CLOCK / hwrate; |
| rate_ext = VIDC_SOUND_CLOCK_EXT / hwrate_ext; |
| |
| /* Chose between external and internal clock */ |
| diff_int = my_abs(rate_ext-rate); |
| diff_ext = my_abs(rate_int-rate); |
| if (diff_ext < diff_int) { |
| /*printk("VIDC: external %d %d %d\n", rate, rate_ext, hwrate_ext);*/ |
| hwrate=hwrate_ext; |
| hwctrl=0x00000002; |
| /* Allow roughly 0.4% tolerance */ |
| if (diff_ext > (rate/256)) |
| rate=rate_ext; |
| } else { |
| /*printk("VIDC: internal %d %d %d\n", rate, rate_int, hwrate);*/ |
| hwctrl=0x00000003; |
| /* Allow rougly 0.4% tolerance */ |
| if (diff_int > (rate/256)) |
| rate=rate_int; |
| } |
| |
| vidc_writel(0xb0000000 | (hwrate - 2)); |
| vidc_writel(0xb1000000 | hwctrl); |
| |
| newsize = (10000 / hwrate) & ~3; |
| if (newsize < 208) |
| newsize = 208; |
| if (newsize > 4096) |
| newsize = 4096; |
| for (new2size = 128; new2size < newsize; new2size <<= 1); |
| if (new2size - newsize > newsize - (new2size >> 1)) |
| new2size >>= 1; |
| if (new2size > 4096) { |
| printk(KERN_ERR "VIDC: error: dma buffer (%d) %d > 4K\n", |
| newsize, new2size); |
| new2size = 4096; |
| } |
| /*printk("VIDC: dma size %d\n", new2size);*/ |
| dma_bufsize = new2size; |
| vidc_audio_rate = rate; |
| } |
| return vidc_audio_rate; |
| } |
| |
| static short vidc_audio_set_channels(int dev, short channels) |
| { |
| switch (channels) { |
| default: |
| channels = 2; |
| case 1: |
| case 2: |
| vidc_audio_channels = channels; |
| vidc_update_filler(vidc_audio_format, vidc_audio_channels); |
| case 0: |
| break; |
| } |
| return vidc_audio_channels; |
| } |
| |
| /* |
| * Open the device |
| */ |
| static int vidc_audio_open(int dev, int mode) |
| { |
| /* This audio device does not have recording capability */ |
| if (mode == OPEN_READ) |
| return -EPERM; |
| |
| if (vidc_busy) |
| return -EBUSY; |
| |
| vidc_busy = 1; |
| return 0; |
| } |
| |
| /* |
| * Close the device |
| */ |
| static void vidc_audio_close(int dev) |
| { |
| vidc_busy = 0; |
| } |
| |
| /* |
| * Output a block via DMA to sound device. |
| * |
| * We just set the DMA start and count; the DMA interrupt routine |
| * will take care of formatting the samples (via the appropriate |
| * vidc_filler routine), and flag via vidc_audio_dma_interrupt when |
| * more data is required. |
| */ |
| static void |
| vidc_audio_output_block(int dev, unsigned long buf, int total_count, int one) |
| { |
| struct dma_buffparms *dmap = audio_devs[dev]->dmap_out; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| dma_start = buf - (unsigned long)dmap->raw_buf_phys + (unsigned long)dmap->raw_buf; |
| dma_count = total_count; |
| local_irq_restore(flags); |
| } |
| |
| static void |
| vidc_audio_start_input(int dev, unsigned long buf, int count, int intrflag) |
| { |
| } |
| |
| static int vidc_audio_prepare_for_input(int dev, int bsize, int bcount) |
| { |
| return -EINVAL; |
| } |
| |
| static irqreturn_t vidc_audio_dma_interrupt(void) |
| { |
| DMAbuf_outputintr(vidc_adev, 1); |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Prepare for outputting samples. |
| * |
| * Each buffer that will be passed will be `bsize' bytes long, |
| * with a total of `bcount' buffers. |
| */ |
| static int vidc_audio_prepare_for_output(int dev, int bsize, int bcount) |
| { |
| struct audio_operations *adev = audio_devs[dev]; |
| |
| dma_interrupt = NULL; |
| adev->dmap_out->flags |= DMA_NODMA; |
| |
| return 0; |
| } |
| |
| /* |
| * Stop our current operation. |
| */ |
| static void vidc_audio_reset(int dev) |
| { |
| dma_interrupt = NULL; |
| } |
| |
| static int vidc_audio_local_qlen(int dev) |
| { |
| return /*dma_count !=*/ 0; |
| } |
| |
| static void vidc_audio_trigger(int dev, int enable_bits) |
| { |
| struct audio_operations *adev = audio_devs[dev]; |
| |
| if (enable_bits & PCM_ENABLE_OUTPUT) { |
| if (!(adev->dmap_out->flags & DMA_ACTIVE)) { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| /* prevent recusion */ |
| adev->dmap_out->flags |= DMA_ACTIVE; |
| |
| dma_interrupt = vidc_audio_dma_interrupt; |
| vidc_sound_dma_irq(0, NULL); |
| iomd_writeb(DMA_CR_E | 0x10, IOMD_SD0CR); |
| |
| local_irq_restore(flags); |
| } |
| } |
| } |
| |
| static struct audio_driver vidc_audio_driver = |
| { |
| .owner = THIS_MODULE, |
| .open = vidc_audio_open, |
| .close = vidc_audio_close, |
| .output_block = vidc_audio_output_block, |
| .start_input = vidc_audio_start_input, |
| .prepare_for_input = vidc_audio_prepare_for_input, |
| .prepare_for_output = vidc_audio_prepare_for_output, |
| .halt_io = vidc_audio_reset, |
| .local_qlen = vidc_audio_local_qlen, |
| .trigger = vidc_audio_trigger, |
| .set_speed = vidc_audio_set_speed, |
| .set_bits = vidc_audio_set_format, |
| .set_channels = vidc_audio_set_channels |
| }; |
| |
| static struct mixer_operations vidc_mixer_operations = { |
| .owner = THIS_MODULE, |
| .id = "VIDC", |
| .name = "VIDCsound", |
| .ioctl = vidc_mixer_ioctl |
| }; |
| |
| void vidc_update_filler(int format, int channels) |
| { |
| #define TYPE(fmt,ch) (((fmt)<<2) | ((ch)&3)) |
| |
| switch (TYPE(format, channels)) { |
| default: |
| case TYPE(AFMT_U8, 1): |
| vidc_filler = vidc_fill_1x8_u; |
| break; |
| |
| case TYPE(AFMT_U8, 2): |
| vidc_filler = vidc_fill_2x8_u; |
| break; |
| |
| case TYPE(AFMT_S8, 1): |
| vidc_filler = vidc_fill_1x8_s; |
| break; |
| |
| case TYPE(AFMT_S8, 2): |
| vidc_filler = vidc_fill_2x8_s; |
| break; |
| |
| case TYPE(AFMT_S16_LE, 1): |
| vidc_filler = vidc_fill_1x16_s; |
| break; |
| |
| case TYPE(AFMT_S16_LE, 2): |
| vidc_filler = vidc_fill_2x16_s; |
| break; |
| } |
| } |
| |
| static void __init attach_vidc(struct address_info *hw_config) |
| { |
| char name[32]; |
| int i, adev; |
| |
| sprintf(name, "VIDC %d-bit sound", hw_config->card_subtype); |
| conf_printf(name, hw_config); |
| memset(dma_buf, 0, sizeof(dma_buf)); |
| |
| adev = sound_install_audiodrv(AUDIO_DRIVER_VERSION, name, |
| &vidc_audio_driver, sizeof(vidc_audio_driver), |
| DMA_AUTOMODE, AFMT_U8 | AFMT_S8 | AFMT_S16_LE, |
| NULL, hw_config->dma, hw_config->dma2); |
| |
| if (adev < 0) |
| goto audio_failed; |
| |
| /* |
| * 1024 bytes => 64 buffers |
| */ |
| audio_devs[adev]->min_fragment = 10; |
| audio_devs[adev]->mixer_dev = num_mixers; |
| |
| audio_devs[adev]->mixer_dev = |
| sound_install_mixer(MIXER_DRIVER_VERSION, |
| name, &vidc_mixer_operations, |
| sizeof(vidc_mixer_operations), NULL); |
| |
| if (audio_devs[adev]->mixer_dev < 0) |
| goto mixer_failed; |
| |
| for (i = 0; i < 2; i++) { |
| dma_buf[i] = get_zeroed_page(GFP_KERNEL); |
| if (!dma_buf[i]) { |
| printk(KERN_ERR "%s: can't allocate required buffers\n", |
| name); |
| goto mem_failed; |
| } |
| dma_pbuf[i] = virt_to_phys((void *)dma_buf[i]); |
| } |
| |
| if (sound_alloc_dma(hw_config->dma, hw_config->name)) { |
| printk(KERN_ERR "%s: DMA %d is in use\n", name, hw_config->dma); |
| goto dma_failed; |
| } |
| |
| if (request_irq(hw_config->irq, vidc_sound_dma_irq, 0, |
| hw_config->name, &dma_start)) { |
| printk(KERN_ERR "%s: IRQ %d is in use\n", name, hw_config->irq); |
| goto irq_failed; |
| } |
| vidc_adev = adev; |
| vidc_mixer_set(SOUND_MIXER_VOLUME, (85 | 85 << 8)); |
| |
| #if defined(CONFIG_SOUND_SOFTOSS) || defined(CONFIG_SOUND_SOFTOSS_MODULE) |
| softoss_dev = adev; |
| #endif |
| return; |
| |
| irq_failed: |
| sound_free_dma(hw_config->dma); |
| dma_failed: |
| mem_failed: |
| for (i = 0; i < 2; i++) |
| free_page(dma_buf[i]); |
| sound_unload_mixerdev(audio_devs[adev]->mixer_dev); |
| mixer_failed: |
| sound_unload_audiodev(adev); |
| audio_failed: |
| return; |
| } |
| |
| static int __init probe_vidc(struct address_info *hw_config) |
| { |
| hw_config->irq = IRQ_DMAS0; |
| hw_config->dma = DMA_VIRTUAL_SOUND; |
| hw_config->dma2 = -1; |
| hw_config->card_subtype = 16; |
| hw_config->name = "VIDC20"; |
| return 1; |
| } |
| |
| static void __exit unload_vidc(struct address_info *hw_config) |
| { |
| int i, adev = vidc_adev; |
| |
| vidc_adev = -1; |
| |
| free_irq(hw_config->irq, &dma_start); |
| sound_free_dma(hw_config->dma); |
| |
| if (adev >= 0) { |
| sound_unload_mixerdev(audio_devs[adev]->mixer_dev); |
| sound_unload_audiodev(adev); |
| for (i = 0; i < 2; i++) |
| free_page(dma_buf[i]); |
| } |
| } |
| |
| static struct address_info cfg; |
| |
| static int __init init_vidc(void) |
| { |
| if (probe_vidc(&cfg) == 0) |
| return -ENODEV; |
| |
| attach_vidc(&cfg); |
| |
| return 0; |
| } |
| |
| static void __exit cleanup_vidc(void) |
| { |
| unload_vidc(&cfg); |
| } |
| |
| module_init(init_vidc); |
| module_exit(cleanup_vidc); |
| |
| MODULE_AUTHOR("Russell King"); |
| MODULE_DESCRIPTION("VIDC20 audio driver"); |
| MODULE_LICENSE("GPL"); |