| /* |
| * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| /* |
| * QCOM BAM DMA engine driver |
| * |
| * QCOM BAM DMA blocks are distributed amongst a number of the on-chip |
| * peripherals on the MSM 8x74. The configuration of the channels are dependent |
| * on the way they are hard wired to that specific peripheral. The peripheral |
| * device tree entries specify the configuration of each channel. |
| * |
| * The DMA controller requires the use of external memory for storage of the |
| * hardware descriptors for each channel. The descriptor FIFO is accessed as a |
| * circular buffer and operations are managed according to the offset within the |
| * FIFO. After pipe/channel reset, all of the pipe registers and internal state |
| * are back to defaults. |
| * |
| * During DMA operations, we write descriptors to the FIFO, being careful to |
| * handle wrapping and then write the last FIFO offset to that channel's |
| * P_EVNT_REG register to kick off the transaction. The P_SW_OFSTS register |
| * indicates the current FIFO offset that is being processed, so there is some |
| * indication of where the hardware is currently working. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/io.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/scatterlist.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_dma.h> |
| #include <linux/clk.h> |
| #include <linux/dmaengine.h> |
| |
| #include "../dmaengine.h" |
| #include "../virt-dma.h" |
| |
| struct bam_desc_hw { |
| __le32 addr; /* Buffer physical address */ |
| __le16 size; /* Buffer size in bytes */ |
| __le16 flags; |
| }; |
| |
| #define DESC_FLAG_INT BIT(15) |
| #define DESC_FLAG_EOT BIT(14) |
| #define DESC_FLAG_EOB BIT(13) |
| #define DESC_FLAG_NWD BIT(12) |
| |
| struct bam_async_desc { |
| struct virt_dma_desc vd; |
| |
| u32 num_desc; |
| u32 xfer_len; |
| |
| /* transaction flags, EOT|EOB|NWD */ |
| u16 flags; |
| |
| struct bam_desc_hw *curr_desc; |
| |
| enum dma_transfer_direction dir; |
| size_t length; |
| struct bam_desc_hw desc[0]; |
| }; |
| |
| enum bam_reg { |
| BAM_CTRL, |
| BAM_REVISION, |
| BAM_NUM_PIPES, |
| BAM_DESC_CNT_TRSHLD, |
| BAM_IRQ_SRCS, |
| BAM_IRQ_SRCS_MSK, |
| BAM_IRQ_SRCS_UNMASKED, |
| BAM_IRQ_STTS, |
| BAM_IRQ_CLR, |
| BAM_IRQ_EN, |
| BAM_CNFG_BITS, |
| BAM_IRQ_SRCS_EE, |
| BAM_IRQ_SRCS_MSK_EE, |
| BAM_P_CTRL, |
| BAM_P_RST, |
| BAM_P_HALT, |
| BAM_P_IRQ_STTS, |
| BAM_P_IRQ_CLR, |
| BAM_P_IRQ_EN, |
| BAM_P_EVNT_DEST_ADDR, |
| BAM_P_EVNT_REG, |
| BAM_P_SW_OFSTS, |
| BAM_P_DATA_FIFO_ADDR, |
| BAM_P_DESC_FIFO_ADDR, |
| BAM_P_EVNT_GEN_TRSHLD, |
| BAM_P_FIFO_SIZES, |
| }; |
| |
| struct reg_offset_data { |
| u32 base_offset; |
| unsigned int pipe_mult, evnt_mult, ee_mult; |
| }; |
| |
| static const struct reg_offset_data bam_v1_3_reg_info[] = { |
| [BAM_CTRL] = { 0x0F80, 0x00, 0x00, 0x00 }, |
| [BAM_REVISION] = { 0x0F84, 0x00, 0x00, 0x00 }, |
| [BAM_NUM_PIPES] = { 0x0FBC, 0x00, 0x00, 0x00 }, |
| [BAM_DESC_CNT_TRSHLD] = { 0x0F88, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_SRCS] = { 0x0F8C, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_SRCS_MSK] = { 0x0F90, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_SRCS_UNMASKED] = { 0x0FB0, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_STTS] = { 0x0F94, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_CLR] = { 0x0F98, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_EN] = { 0x0F9C, 0x00, 0x00, 0x00 }, |
| [BAM_CNFG_BITS] = { 0x0FFC, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_SRCS_EE] = { 0x1800, 0x00, 0x00, 0x80 }, |
| [BAM_IRQ_SRCS_MSK_EE] = { 0x1804, 0x00, 0x00, 0x80 }, |
| [BAM_P_CTRL] = { 0x0000, 0x80, 0x00, 0x00 }, |
| [BAM_P_RST] = { 0x0004, 0x80, 0x00, 0x00 }, |
| [BAM_P_HALT] = { 0x0008, 0x80, 0x00, 0x00 }, |
| [BAM_P_IRQ_STTS] = { 0x0010, 0x80, 0x00, 0x00 }, |
| [BAM_P_IRQ_CLR] = { 0x0014, 0x80, 0x00, 0x00 }, |
| [BAM_P_IRQ_EN] = { 0x0018, 0x80, 0x00, 0x00 }, |
| [BAM_P_EVNT_DEST_ADDR] = { 0x102C, 0x00, 0x40, 0x00 }, |
| [BAM_P_EVNT_REG] = { 0x1018, 0x00, 0x40, 0x00 }, |
| [BAM_P_SW_OFSTS] = { 0x1000, 0x00, 0x40, 0x00 }, |
| [BAM_P_DATA_FIFO_ADDR] = { 0x1024, 0x00, 0x40, 0x00 }, |
| [BAM_P_DESC_FIFO_ADDR] = { 0x101C, 0x00, 0x40, 0x00 }, |
| [BAM_P_EVNT_GEN_TRSHLD] = { 0x1028, 0x00, 0x40, 0x00 }, |
| [BAM_P_FIFO_SIZES] = { 0x1020, 0x00, 0x40, 0x00 }, |
| }; |
| |
| static const struct reg_offset_data bam_v1_4_reg_info[] = { |
| [BAM_CTRL] = { 0x0000, 0x00, 0x00, 0x00 }, |
| [BAM_REVISION] = { 0x0004, 0x00, 0x00, 0x00 }, |
| [BAM_NUM_PIPES] = { 0x003C, 0x00, 0x00, 0x00 }, |
| [BAM_DESC_CNT_TRSHLD] = { 0x0008, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_SRCS] = { 0x000C, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_SRCS_MSK] = { 0x0010, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_SRCS_UNMASKED] = { 0x0030, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_STTS] = { 0x0014, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_CLR] = { 0x0018, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_EN] = { 0x001C, 0x00, 0x00, 0x00 }, |
| [BAM_CNFG_BITS] = { 0x007C, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_SRCS_EE] = { 0x0800, 0x00, 0x00, 0x80 }, |
| [BAM_IRQ_SRCS_MSK_EE] = { 0x0804, 0x00, 0x00, 0x80 }, |
| [BAM_P_CTRL] = { 0x1000, 0x1000, 0x00, 0x00 }, |
| [BAM_P_RST] = { 0x1004, 0x1000, 0x00, 0x00 }, |
| [BAM_P_HALT] = { 0x1008, 0x1000, 0x00, 0x00 }, |
| [BAM_P_IRQ_STTS] = { 0x1010, 0x1000, 0x00, 0x00 }, |
| [BAM_P_IRQ_CLR] = { 0x1014, 0x1000, 0x00, 0x00 }, |
| [BAM_P_IRQ_EN] = { 0x1018, 0x1000, 0x00, 0x00 }, |
| [BAM_P_EVNT_DEST_ADDR] = { 0x182C, 0x00, 0x1000, 0x00 }, |
| [BAM_P_EVNT_REG] = { 0x1818, 0x00, 0x1000, 0x00 }, |
| [BAM_P_SW_OFSTS] = { 0x1800, 0x00, 0x1000, 0x00 }, |
| [BAM_P_DATA_FIFO_ADDR] = { 0x1824, 0x00, 0x1000, 0x00 }, |
| [BAM_P_DESC_FIFO_ADDR] = { 0x181C, 0x00, 0x1000, 0x00 }, |
| [BAM_P_EVNT_GEN_TRSHLD] = { 0x1828, 0x00, 0x1000, 0x00 }, |
| [BAM_P_FIFO_SIZES] = { 0x1820, 0x00, 0x1000, 0x00 }, |
| }; |
| |
| static const struct reg_offset_data bam_v1_7_reg_info[] = { |
| [BAM_CTRL] = { 0x00000, 0x00, 0x00, 0x00 }, |
| [BAM_REVISION] = { 0x01000, 0x00, 0x00, 0x00 }, |
| [BAM_NUM_PIPES] = { 0x01008, 0x00, 0x00, 0x00 }, |
| [BAM_DESC_CNT_TRSHLD] = { 0x00008, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_SRCS] = { 0x03010, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_SRCS_MSK] = { 0x03014, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_SRCS_UNMASKED] = { 0x03018, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_STTS] = { 0x00014, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_CLR] = { 0x00018, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_EN] = { 0x0001C, 0x00, 0x00, 0x00 }, |
| [BAM_CNFG_BITS] = { 0x0007C, 0x00, 0x00, 0x00 }, |
| [BAM_IRQ_SRCS_EE] = { 0x03000, 0x00, 0x00, 0x1000 }, |
| [BAM_IRQ_SRCS_MSK_EE] = { 0x03004, 0x00, 0x00, 0x1000 }, |
| [BAM_P_CTRL] = { 0x13000, 0x1000, 0x00, 0x00 }, |
| [BAM_P_RST] = { 0x13004, 0x1000, 0x00, 0x00 }, |
| [BAM_P_HALT] = { 0x13008, 0x1000, 0x00, 0x00 }, |
| [BAM_P_IRQ_STTS] = { 0x13010, 0x1000, 0x00, 0x00 }, |
| [BAM_P_IRQ_CLR] = { 0x13014, 0x1000, 0x00, 0x00 }, |
| [BAM_P_IRQ_EN] = { 0x13018, 0x1000, 0x00, 0x00 }, |
| [BAM_P_EVNT_DEST_ADDR] = { 0x1382C, 0x00, 0x1000, 0x00 }, |
| [BAM_P_EVNT_REG] = { 0x13818, 0x00, 0x1000, 0x00 }, |
| [BAM_P_SW_OFSTS] = { 0x13800, 0x00, 0x1000, 0x00 }, |
| [BAM_P_DATA_FIFO_ADDR] = { 0x13824, 0x00, 0x1000, 0x00 }, |
| [BAM_P_DESC_FIFO_ADDR] = { 0x1381C, 0x00, 0x1000, 0x00 }, |
| [BAM_P_EVNT_GEN_TRSHLD] = { 0x13828, 0x00, 0x1000, 0x00 }, |
| [BAM_P_FIFO_SIZES] = { 0x13820, 0x00, 0x1000, 0x00 }, |
| }; |
| |
| /* BAM CTRL */ |
| #define BAM_SW_RST BIT(0) |
| #define BAM_EN BIT(1) |
| #define BAM_EN_ACCUM BIT(4) |
| #define BAM_TESTBUS_SEL_SHIFT 5 |
| #define BAM_TESTBUS_SEL_MASK 0x3F |
| #define BAM_DESC_CACHE_SEL_SHIFT 13 |
| #define BAM_DESC_CACHE_SEL_MASK 0x3 |
| #define BAM_CACHED_DESC_STORE BIT(15) |
| #define IBC_DISABLE BIT(16) |
| |
| /* BAM REVISION */ |
| #define REVISION_SHIFT 0 |
| #define REVISION_MASK 0xFF |
| #define NUM_EES_SHIFT 8 |
| #define NUM_EES_MASK 0xF |
| #define CE_BUFFER_SIZE BIT(13) |
| #define AXI_ACTIVE BIT(14) |
| #define USE_VMIDMT BIT(15) |
| #define SECURED BIT(16) |
| #define BAM_HAS_NO_BYPASS BIT(17) |
| #define HIGH_FREQUENCY_BAM BIT(18) |
| #define INACTIV_TMRS_EXST BIT(19) |
| #define NUM_INACTIV_TMRS BIT(20) |
| #define DESC_CACHE_DEPTH_SHIFT 21 |
| #define DESC_CACHE_DEPTH_1 (0 << DESC_CACHE_DEPTH_SHIFT) |
| #define DESC_CACHE_DEPTH_2 (1 << DESC_CACHE_DEPTH_SHIFT) |
| #define DESC_CACHE_DEPTH_3 (2 << DESC_CACHE_DEPTH_SHIFT) |
| #define DESC_CACHE_DEPTH_4 (3 << DESC_CACHE_DEPTH_SHIFT) |
| #define CMD_DESC_EN BIT(23) |
| #define INACTIV_TMR_BASE_SHIFT 24 |
| #define INACTIV_TMR_BASE_MASK 0xFF |
| |
| /* BAM NUM PIPES */ |
| #define BAM_NUM_PIPES_SHIFT 0 |
| #define BAM_NUM_PIPES_MASK 0xFF |
| #define PERIPH_NON_PIPE_GRP_SHIFT 16 |
| #define PERIPH_NON_PIP_GRP_MASK 0xFF |
| #define BAM_NON_PIPE_GRP_SHIFT 24 |
| #define BAM_NON_PIPE_GRP_MASK 0xFF |
| |
| /* BAM CNFG BITS */ |
| #define BAM_PIPE_CNFG BIT(2) |
| #define BAM_FULL_PIPE BIT(11) |
| #define BAM_NO_EXT_P_RST BIT(12) |
| #define BAM_IBC_DISABLE BIT(13) |
| #define BAM_SB_CLK_REQ BIT(14) |
| #define BAM_PSM_CSW_REQ BIT(15) |
| #define BAM_PSM_P_RES BIT(16) |
| #define BAM_AU_P_RES BIT(17) |
| #define BAM_SI_P_RES BIT(18) |
| #define BAM_WB_P_RES BIT(19) |
| #define BAM_WB_BLK_CSW BIT(20) |
| #define BAM_WB_CSW_ACK_IDL BIT(21) |
| #define BAM_WB_RETR_SVPNT BIT(22) |
| #define BAM_WB_DSC_AVL_P_RST BIT(23) |
| #define BAM_REG_P_EN BIT(24) |
| #define BAM_PSM_P_HD_DATA BIT(25) |
| #define BAM_AU_ACCUMED BIT(26) |
| #define BAM_CMD_ENABLE BIT(27) |
| |
| #define BAM_CNFG_BITS_DEFAULT (BAM_PIPE_CNFG | \ |
| BAM_NO_EXT_P_RST | \ |
| BAM_IBC_DISABLE | \ |
| BAM_SB_CLK_REQ | \ |
| BAM_PSM_CSW_REQ | \ |
| BAM_PSM_P_RES | \ |
| BAM_AU_P_RES | \ |
| BAM_SI_P_RES | \ |
| BAM_WB_P_RES | \ |
| BAM_WB_BLK_CSW | \ |
| BAM_WB_CSW_ACK_IDL | \ |
| BAM_WB_RETR_SVPNT | \ |
| BAM_WB_DSC_AVL_P_RST | \ |
| BAM_REG_P_EN | \ |
| BAM_PSM_P_HD_DATA | \ |
| BAM_AU_ACCUMED | \ |
| BAM_CMD_ENABLE) |
| |
| /* PIPE CTRL */ |
| #define P_EN BIT(1) |
| #define P_DIRECTION BIT(3) |
| #define P_SYS_STRM BIT(4) |
| #define P_SYS_MODE BIT(5) |
| #define P_AUTO_EOB BIT(6) |
| #define P_AUTO_EOB_SEL_SHIFT 7 |
| #define P_AUTO_EOB_SEL_512 (0 << P_AUTO_EOB_SEL_SHIFT) |
| #define P_AUTO_EOB_SEL_256 (1 << P_AUTO_EOB_SEL_SHIFT) |
| #define P_AUTO_EOB_SEL_128 (2 << P_AUTO_EOB_SEL_SHIFT) |
| #define P_AUTO_EOB_SEL_64 (3 << P_AUTO_EOB_SEL_SHIFT) |
| #define P_PREFETCH_LIMIT_SHIFT 9 |
| #define P_PREFETCH_LIMIT_32 (0 << P_PREFETCH_LIMIT_SHIFT) |
| #define P_PREFETCH_LIMIT_16 (1 << P_PREFETCH_LIMIT_SHIFT) |
| #define P_PREFETCH_LIMIT_4 (2 << P_PREFETCH_LIMIT_SHIFT) |
| #define P_WRITE_NWD BIT(11) |
| #define P_LOCK_GROUP_SHIFT 16 |
| #define P_LOCK_GROUP_MASK 0x1F |
| |
| /* BAM_DESC_CNT_TRSHLD */ |
| #define CNT_TRSHLD 0xffff |
| #define DEFAULT_CNT_THRSHLD 0x4 |
| |
| /* BAM_IRQ_SRCS */ |
| #define BAM_IRQ BIT(31) |
| #define P_IRQ 0x7fffffff |
| |
| /* BAM_IRQ_SRCS_MSK */ |
| #define BAM_IRQ_MSK BAM_IRQ |
| #define P_IRQ_MSK P_IRQ |
| |
| /* BAM_IRQ_STTS */ |
| #define BAM_TIMER_IRQ BIT(4) |
| #define BAM_EMPTY_IRQ BIT(3) |
| #define BAM_ERROR_IRQ BIT(2) |
| #define BAM_HRESP_ERR_IRQ BIT(1) |
| |
| /* BAM_IRQ_CLR */ |
| #define BAM_TIMER_CLR BIT(4) |
| #define BAM_EMPTY_CLR BIT(3) |
| #define BAM_ERROR_CLR BIT(2) |
| #define BAM_HRESP_ERR_CLR BIT(1) |
| |
| /* BAM_IRQ_EN */ |
| #define BAM_TIMER_EN BIT(4) |
| #define BAM_EMPTY_EN BIT(3) |
| #define BAM_ERROR_EN BIT(2) |
| #define BAM_HRESP_ERR_EN BIT(1) |
| |
| /* BAM_P_IRQ_EN */ |
| #define P_PRCSD_DESC_EN BIT(0) |
| #define P_TIMER_EN BIT(1) |
| #define P_WAKE_EN BIT(2) |
| #define P_OUT_OF_DESC_EN BIT(3) |
| #define P_ERR_EN BIT(4) |
| #define P_TRNSFR_END_EN BIT(5) |
| #define P_DEFAULT_IRQS_EN (P_PRCSD_DESC_EN | P_ERR_EN | P_TRNSFR_END_EN) |
| |
| /* BAM_P_SW_OFSTS */ |
| #define P_SW_OFSTS_MASK 0xffff |
| |
| #define BAM_DESC_FIFO_SIZE SZ_32K |
| #define MAX_DESCRIPTORS (BAM_DESC_FIFO_SIZE / sizeof(struct bam_desc_hw) - 1) |
| #define BAM_MAX_DATA_SIZE (SZ_32K - 8) |
| |
| struct bam_chan { |
| struct virt_dma_chan vc; |
| |
| struct bam_device *bdev; |
| |
| /* configuration from device tree */ |
| u32 id; |
| |
| struct bam_async_desc *curr_txd; /* current running dma */ |
| |
| /* runtime configuration */ |
| struct dma_slave_config slave; |
| |
| /* fifo storage */ |
| struct bam_desc_hw *fifo_virt; |
| dma_addr_t fifo_phys; |
| |
| /* fifo markers */ |
| unsigned short head; /* start of active descriptor entries */ |
| unsigned short tail; /* end of active descriptor entries */ |
| |
| unsigned int initialized; /* is the channel hw initialized? */ |
| unsigned int paused; /* is the channel paused? */ |
| unsigned int reconfigure; /* new slave config? */ |
| |
| struct list_head node; |
| }; |
| |
| static inline struct bam_chan *to_bam_chan(struct dma_chan *common) |
| { |
| return container_of(common, struct bam_chan, vc.chan); |
| } |
| |
| struct bam_device { |
| void __iomem *regs; |
| struct device *dev; |
| struct dma_device common; |
| struct device_dma_parameters dma_parms; |
| struct bam_chan *channels; |
| u32 num_channels; |
| |
| /* execution environment ID, from DT */ |
| u32 ee; |
| |
| const struct reg_offset_data *layout; |
| |
| struct clk *bamclk; |
| int irq; |
| |
| /* dma start transaction tasklet */ |
| struct tasklet_struct task; |
| }; |
| |
| /** |
| * bam_addr - returns BAM register address |
| * @bdev: bam device |
| * @pipe: pipe instance (ignored when register doesn't have multiple instances) |
| * @reg: register enum |
| */ |
| static inline void __iomem *bam_addr(struct bam_device *bdev, u32 pipe, |
| enum bam_reg reg) |
| { |
| const struct reg_offset_data r = bdev->layout[reg]; |
| |
| return bdev->regs + r.base_offset + |
| r.pipe_mult * pipe + |
| r.evnt_mult * pipe + |
| r.ee_mult * bdev->ee; |
| } |
| |
| /** |
| * bam_reset_channel - Reset individual BAM DMA channel |
| * @bchan: bam channel |
| * |
| * This function resets a specific BAM channel |
| */ |
| static void bam_reset_channel(struct bam_chan *bchan) |
| { |
| struct bam_device *bdev = bchan->bdev; |
| |
| lockdep_assert_held(&bchan->vc.lock); |
| |
| /* reset channel */ |
| writel_relaxed(1, bam_addr(bdev, bchan->id, BAM_P_RST)); |
| writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_RST)); |
| |
| /* don't allow cpu to reorder BAM register accesses done after this */ |
| wmb(); |
| |
| /* make sure hw is initialized when channel is used the first time */ |
| bchan->initialized = 0; |
| } |
| |
| /** |
| * bam_chan_init_hw - Initialize channel hardware |
| * @bchan: bam channel |
| * |
| * This function resets and initializes the BAM channel |
| */ |
| static void bam_chan_init_hw(struct bam_chan *bchan, |
| enum dma_transfer_direction dir) |
| { |
| struct bam_device *bdev = bchan->bdev; |
| u32 val; |
| |
| /* Reset the channel to clear internal state of the FIFO */ |
| bam_reset_channel(bchan); |
| |
| /* |
| * write out 8 byte aligned address. We have enough space for this |
| * because we allocated 1 more descriptor (8 bytes) than we can use |
| */ |
| writel_relaxed(ALIGN(bchan->fifo_phys, sizeof(struct bam_desc_hw)), |
| bam_addr(bdev, bchan->id, BAM_P_DESC_FIFO_ADDR)); |
| writel_relaxed(BAM_DESC_FIFO_SIZE, |
| bam_addr(bdev, bchan->id, BAM_P_FIFO_SIZES)); |
| |
| /* enable the per pipe interrupts, enable EOT, ERR, and INT irqs */ |
| writel_relaxed(P_DEFAULT_IRQS_EN, |
| bam_addr(bdev, bchan->id, BAM_P_IRQ_EN)); |
| |
| /* unmask the specific pipe and EE combo */ |
| val = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); |
| val |= BIT(bchan->id); |
| writel_relaxed(val, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); |
| |
| /* don't allow cpu to reorder the channel enable done below */ |
| wmb(); |
| |
| /* set fixed direction and mode, then enable channel */ |
| val = P_EN | P_SYS_MODE; |
| if (dir == DMA_DEV_TO_MEM) |
| val |= P_DIRECTION; |
| |
| writel_relaxed(val, bam_addr(bdev, bchan->id, BAM_P_CTRL)); |
| |
| bchan->initialized = 1; |
| |
| /* init FIFO pointers */ |
| bchan->head = 0; |
| bchan->tail = 0; |
| } |
| |
| /** |
| * bam_alloc_chan - Allocate channel resources for DMA channel. |
| * @chan: specified channel |
| * |
| * This function allocates the FIFO descriptor memory |
| */ |
| static int bam_alloc_chan(struct dma_chan *chan) |
| { |
| struct bam_chan *bchan = to_bam_chan(chan); |
| struct bam_device *bdev = bchan->bdev; |
| |
| if (bchan->fifo_virt) |
| return 0; |
| |
| /* allocate FIFO descriptor space, but only if necessary */ |
| bchan->fifo_virt = dma_alloc_wc(bdev->dev, BAM_DESC_FIFO_SIZE, |
| &bchan->fifo_phys, GFP_KERNEL); |
| |
| if (!bchan->fifo_virt) { |
| dev_err(bdev->dev, "Failed to allocate desc fifo\n"); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * bam_free_chan - Frees dma resources associated with specific channel |
| * @chan: specified channel |
| * |
| * Free the allocated fifo descriptor memory and channel resources |
| * |
| */ |
| static void bam_free_chan(struct dma_chan *chan) |
| { |
| struct bam_chan *bchan = to_bam_chan(chan); |
| struct bam_device *bdev = bchan->bdev; |
| u32 val; |
| unsigned long flags; |
| |
| vchan_free_chan_resources(to_virt_chan(chan)); |
| |
| if (bchan->curr_txd) { |
| dev_err(bchan->bdev->dev, "Cannot free busy channel\n"); |
| return; |
| } |
| |
| spin_lock_irqsave(&bchan->vc.lock, flags); |
| bam_reset_channel(bchan); |
| spin_unlock_irqrestore(&bchan->vc.lock, flags); |
| |
| dma_free_wc(bdev->dev, BAM_DESC_FIFO_SIZE, bchan->fifo_virt, |
| bchan->fifo_phys); |
| bchan->fifo_virt = NULL; |
| |
| /* mask irq for pipe/channel */ |
| val = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); |
| val &= ~BIT(bchan->id); |
| writel_relaxed(val, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); |
| |
| /* disable irq */ |
| writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_IRQ_EN)); |
| } |
| |
| /** |
| * bam_slave_config - set slave configuration for channel |
| * @chan: dma channel |
| * @cfg: slave configuration |
| * |
| * Sets slave configuration for channel |
| * |
| */ |
| static int bam_slave_config(struct dma_chan *chan, |
| struct dma_slave_config *cfg) |
| { |
| struct bam_chan *bchan = to_bam_chan(chan); |
| unsigned long flag; |
| |
| spin_lock_irqsave(&bchan->vc.lock, flag); |
| memcpy(&bchan->slave, cfg, sizeof(*cfg)); |
| bchan->reconfigure = 1; |
| spin_unlock_irqrestore(&bchan->vc.lock, flag); |
| |
| return 0; |
| } |
| |
| /** |
| * bam_prep_slave_sg - Prep slave sg transaction |
| * |
| * @chan: dma channel |
| * @sgl: scatter gather list |
| * @sg_len: length of sg |
| * @direction: DMA transfer direction |
| * @flags: DMA flags |
| * @context: transfer context (unused) |
| */ |
| static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan, |
| struct scatterlist *sgl, unsigned int sg_len, |
| enum dma_transfer_direction direction, unsigned long flags, |
| void *context) |
| { |
| struct bam_chan *bchan = to_bam_chan(chan); |
| struct bam_device *bdev = bchan->bdev; |
| struct bam_async_desc *async_desc; |
| struct scatterlist *sg; |
| u32 i; |
| struct bam_desc_hw *desc; |
| unsigned int num_alloc = 0; |
| |
| |
| if (!is_slave_direction(direction)) { |
| dev_err(bdev->dev, "invalid dma direction\n"); |
| return NULL; |
| } |
| |
| /* calculate number of required entries */ |
| for_each_sg(sgl, sg, sg_len, i) |
| num_alloc += DIV_ROUND_UP(sg_dma_len(sg), BAM_MAX_DATA_SIZE); |
| |
| /* allocate enough room to accomodate the number of entries */ |
| async_desc = kzalloc(sizeof(*async_desc) + |
| (num_alloc * sizeof(struct bam_desc_hw)), GFP_NOWAIT); |
| |
| if (!async_desc) |
| goto err_out; |
| |
| if (flags & DMA_PREP_FENCE) |
| async_desc->flags |= DESC_FLAG_NWD; |
| |
| if (flags & DMA_PREP_INTERRUPT) |
| async_desc->flags |= DESC_FLAG_EOT; |
| else |
| async_desc->flags |= DESC_FLAG_INT; |
| |
| async_desc->num_desc = num_alloc; |
| async_desc->curr_desc = async_desc->desc; |
| async_desc->dir = direction; |
| |
| /* fill in temporary descriptors */ |
| desc = async_desc->desc; |
| for_each_sg(sgl, sg, sg_len, i) { |
| unsigned int remainder = sg_dma_len(sg); |
| unsigned int curr_offset = 0; |
| |
| do { |
| desc->addr = cpu_to_le32(sg_dma_address(sg) + |
| curr_offset); |
| |
| if (remainder > BAM_MAX_DATA_SIZE) { |
| desc->size = cpu_to_le16(BAM_MAX_DATA_SIZE); |
| remainder -= BAM_MAX_DATA_SIZE; |
| curr_offset += BAM_MAX_DATA_SIZE; |
| } else { |
| desc->size = cpu_to_le16(remainder); |
| remainder = 0; |
| } |
| |
| async_desc->length += desc->size; |
| desc++; |
| } while (remainder > 0); |
| } |
| |
| return vchan_tx_prep(&bchan->vc, &async_desc->vd, flags); |
| |
| err_out: |
| kfree(async_desc); |
| return NULL; |
| } |
| |
| /** |
| * bam_dma_terminate_all - terminate all transactions on a channel |
| * @bchan: bam dma channel |
| * |
| * Dequeues and frees all transactions |
| * No callbacks are done |
| * |
| */ |
| static int bam_dma_terminate_all(struct dma_chan *chan) |
| { |
| struct bam_chan *bchan = to_bam_chan(chan); |
| unsigned long flag; |
| LIST_HEAD(head); |
| |
| /* remove all transactions, including active transaction */ |
| spin_lock_irqsave(&bchan->vc.lock, flag); |
| if (bchan->curr_txd) { |
| list_add(&bchan->curr_txd->vd.node, &bchan->vc.desc_issued); |
| bchan->curr_txd = NULL; |
| } |
| |
| vchan_get_all_descriptors(&bchan->vc, &head); |
| spin_unlock_irqrestore(&bchan->vc.lock, flag); |
| |
| vchan_dma_desc_free_list(&bchan->vc, &head); |
| |
| return 0; |
| } |
| |
| /** |
| * bam_pause - Pause DMA channel |
| * @chan: dma channel |
| * |
| */ |
| static int bam_pause(struct dma_chan *chan) |
| { |
| struct bam_chan *bchan = to_bam_chan(chan); |
| struct bam_device *bdev = bchan->bdev; |
| unsigned long flag; |
| |
| spin_lock_irqsave(&bchan->vc.lock, flag); |
| writel_relaxed(1, bam_addr(bdev, bchan->id, BAM_P_HALT)); |
| bchan->paused = 1; |
| spin_unlock_irqrestore(&bchan->vc.lock, flag); |
| |
| return 0; |
| } |
| |
| /** |
| * bam_resume - Resume DMA channel operations |
| * @chan: dma channel |
| * |
| */ |
| static int bam_resume(struct dma_chan *chan) |
| { |
| struct bam_chan *bchan = to_bam_chan(chan); |
| struct bam_device *bdev = bchan->bdev; |
| unsigned long flag; |
| |
| spin_lock_irqsave(&bchan->vc.lock, flag); |
| writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_HALT)); |
| bchan->paused = 0; |
| spin_unlock_irqrestore(&bchan->vc.lock, flag); |
| |
| return 0; |
| } |
| |
| /** |
| * process_channel_irqs - processes the channel interrupts |
| * @bdev: bam controller |
| * |
| * This function processes the channel interrupts |
| * |
| */ |
| static u32 process_channel_irqs(struct bam_device *bdev) |
| { |
| u32 i, srcs, pipe_stts; |
| unsigned long flags; |
| struct bam_async_desc *async_desc; |
| |
| srcs = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_EE)); |
| |
| /* return early if no pipe/channel interrupts are present */ |
| if (!(srcs & P_IRQ)) |
| return srcs; |
| |
| for (i = 0; i < bdev->num_channels; i++) { |
| struct bam_chan *bchan = &bdev->channels[i]; |
| |
| if (!(srcs & BIT(i))) |
| continue; |
| |
| /* clear pipe irq */ |
| pipe_stts = readl_relaxed(bam_addr(bdev, i, BAM_P_IRQ_STTS)); |
| |
| writel_relaxed(pipe_stts, bam_addr(bdev, i, BAM_P_IRQ_CLR)); |
| |
| spin_lock_irqsave(&bchan->vc.lock, flags); |
| async_desc = bchan->curr_txd; |
| |
| if (async_desc) { |
| async_desc->num_desc -= async_desc->xfer_len; |
| async_desc->curr_desc += async_desc->xfer_len; |
| bchan->curr_txd = NULL; |
| |
| /* manage FIFO */ |
| bchan->head += async_desc->xfer_len; |
| bchan->head %= MAX_DESCRIPTORS; |
| |
| /* |
| * if complete, process cookie. Otherwise |
| * push back to front of desc_issued so that |
| * it gets restarted by the tasklet |
| */ |
| if (!async_desc->num_desc) |
| vchan_cookie_complete(&async_desc->vd); |
| else |
| list_add(&async_desc->vd.node, |
| &bchan->vc.desc_issued); |
| } |
| |
| spin_unlock_irqrestore(&bchan->vc.lock, flags); |
| } |
| |
| return srcs; |
| } |
| |
| /** |
| * bam_dma_irq - irq handler for bam controller |
| * @irq: IRQ of interrupt |
| * @data: callback data |
| * |
| * IRQ handler for the bam controller |
| */ |
| static irqreturn_t bam_dma_irq(int irq, void *data) |
| { |
| struct bam_device *bdev = data; |
| u32 clr_mask = 0, srcs = 0; |
| |
| srcs |= process_channel_irqs(bdev); |
| |
| /* kick off tasklet to start next dma transfer */ |
| if (srcs & P_IRQ) |
| tasklet_schedule(&bdev->task); |
| |
| if (srcs & BAM_IRQ) |
| clr_mask = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_STTS)); |
| |
| /* don't allow reorder of the various accesses to the BAM registers */ |
| mb(); |
| |
| writel_relaxed(clr_mask, bam_addr(bdev, 0, BAM_IRQ_CLR)); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * bam_tx_status - returns status of transaction |
| * @chan: dma channel |
| * @cookie: transaction cookie |
| * @txstate: DMA transaction state |
| * |
| * Return status of dma transaction |
| */ |
| static enum dma_status bam_tx_status(struct dma_chan *chan, dma_cookie_t cookie, |
| struct dma_tx_state *txstate) |
| { |
| struct bam_chan *bchan = to_bam_chan(chan); |
| struct virt_dma_desc *vd; |
| int ret; |
| size_t residue = 0; |
| unsigned int i; |
| unsigned long flags; |
| |
| ret = dma_cookie_status(chan, cookie, txstate); |
| if (ret == DMA_COMPLETE) |
| return ret; |
| |
| if (!txstate) |
| return bchan->paused ? DMA_PAUSED : ret; |
| |
| spin_lock_irqsave(&bchan->vc.lock, flags); |
| vd = vchan_find_desc(&bchan->vc, cookie); |
| if (vd) |
| residue = container_of(vd, struct bam_async_desc, vd)->length; |
| else if (bchan->curr_txd && bchan->curr_txd->vd.tx.cookie == cookie) |
| for (i = 0; i < bchan->curr_txd->num_desc; i++) |
| residue += bchan->curr_txd->curr_desc[i].size; |
| |
| spin_unlock_irqrestore(&bchan->vc.lock, flags); |
| |
| dma_set_residue(txstate, residue); |
| |
| if (ret == DMA_IN_PROGRESS && bchan->paused) |
| ret = DMA_PAUSED; |
| |
| return ret; |
| } |
| |
| /** |
| * bam_apply_new_config |
| * @bchan: bam dma channel |
| * @dir: DMA direction |
| */ |
| static void bam_apply_new_config(struct bam_chan *bchan, |
| enum dma_transfer_direction dir) |
| { |
| struct bam_device *bdev = bchan->bdev; |
| u32 maxburst; |
| |
| if (dir == DMA_DEV_TO_MEM) |
| maxburst = bchan->slave.src_maxburst; |
| else |
| maxburst = bchan->slave.dst_maxburst; |
| |
| writel_relaxed(maxburst, bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD)); |
| |
| bchan->reconfigure = 0; |
| } |
| |
| /** |
| * bam_start_dma - start next transaction |
| * @bchan - bam dma channel |
| */ |
| static void bam_start_dma(struct bam_chan *bchan) |
| { |
| struct virt_dma_desc *vd = vchan_next_desc(&bchan->vc); |
| struct bam_device *bdev = bchan->bdev; |
| struct bam_async_desc *async_desc; |
| struct bam_desc_hw *desc; |
| struct bam_desc_hw *fifo = PTR_ALIGN(bchan->fifo_virt, |
| sizeof(struct bam_desc_hw)); |
| |
| lockdep_assert_held(&bchan->vc.lock); |
| |
| if (!vd) |
| return; |
| |
| list_del(&vd->node); |
| |
| async_desc = container_of(vd, struct bam_async_desc, vd); |
| bchan->curr_txd = async_desc; |
| |
| /* on first use, initialize the channel hardware */ |
| if (!bchan->initialized) |
| bam_chan_init_hw(bchan, async_desc->dir); |
| |
| /* apply new slave config changes, if necessary */ |
| if (bchan->reconfigure) |
| bam_apply_new_config(bchan, async_desc->dir); |
| |
| desc = bchan->curr_txd->curr_desc; |
| |
| if (async_desc->num_desc > MAX_DESCRIPTORS) |
| async_desc->xfer_len = MAX_DESCRIPTORS; |
| else |
| async_desc->xfer_len = async_desc->num_desc; |
| |
| /* set any special flags on the last descriptor */ |
| if (async_desc->num_desc == async_desc->xfer_len) |
| desc[async_desc->xfer_len - 1].flags = |
| cpu_to_le16(async_desc->flags); |
| else |
| desc[async_desc->xfer_len - 1].flags |= |
| cpu_to_le16(DESC_FLAG_INT); |
| |
| if (bchan->tail + async_desc->xfer_len > MAX_DESCRIPTORS) { |
| u32 partial = MAX_DESCRIPTORS - bchan->tail; |
| |
| memcpy(&fifo[bchan->tail], desc, |
| partial * sizeof(struct bam_desc_hw)); |
| memcpy(fifo, &desc[partial], (async_desc->xfer_len - partial) * |
| sizeof(struct bam_desc_hw)); |
| } else { |
| memcpy(&fifo[bchan->tail], desc, |
| async_desc->xfer_len * sizeof(struct bam_desc_hw)); |
| } |
| |
| bchan->tail += async_desc->xfer_len; |
| bchan->tail %= MAX_DESCRIPTORS; |
| |
| /* ensure descriptor writes and dma start not reordered */ |
| wmb(); |
| writel_relaxed(bchan->tail * sizeof(struct bam_desc_hw), |
| bam_addr(bdev, bchan->id, BAM_P_EVNT_REG)); |
| } |
| |
| /** |
| * dma_tasklet - DMA IRQ tasklet |
| * @data: tasklet argument (bam controller structure) |
| * |
| * Sets up next DMA operation and then processes all completed transactions |
| */ |
| static void dma_tasklet(unsigned long data) |
| { |
| struct bam_device *bdev = (struct bam_device *)data; |
| struct bam_chan *bchan; |
| unsigned long flags; |
| unsigned int i; |
| |
| /* go through the channels and kick off transactions */ |
| for (i = 0; i < bdev->num_channels; i++) { |
| bchan = &bdev->channels[i]; |
| spin_lock_irqsave(&bchan->vc.lock, flags); |
| |
| if (!list_empty(&bchan->vc.desc_issued) && !bchan->curr_txd) |
| bam_start_dma(bchan); |
| spin_unlock_irqrestore(&bchan->vc.lock, flags); |
| } |
| } |
| |
| /** |
| * bam_issue_pending - starts pending transactions |
| * @chan: dma channel |
| * |
| * Calls tasklet directly which in turn starts any pending transactions |
| */ |
| static void bam_issue_pending(struct dma_chan *chan) |
| { |
| struct bam_chan *bchan = to_bam_chan(chan); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&bchan->vc.lock, flags); |
| |
| /* if work pending and idle, start a transaction */ |
| if (vchan_issue_pending(&bchan->vc) && !bchan->curr_txd) |
| bam_start_dma(bchan); |
| |
| spin_unlock_irqrestore(&bchan->vc.lock, flags); |
| } |
| |
| /** |
| * bam_dma_free_desc - free descriptor memory |
| * @vd: virtual descriptor |
| * |
| */ |
| static void bam_dma_free_desc(struct virt_dma_desc *vd) |
| { |
| struct bam_async_desc *async_desc = container_of(vd, |
| struct bam_async_desc, vd); |
| |
| kfree(async_desc); |
| } |
| |
| static struct dma_chan *bam_dma_xlate(struct of_phandle_args *dma_spec, |
| struct of_dma *of) |
| { |
| struct bam_device *bdev = container_of(of->of_dma_data, |
| struct bam_device, common); |
| unsigned int request; |
| |
| if (dma_spec->args_count != 1) |
| return NULL; |
| |
| request = dma_spec->args[0]; |
| if (request >= bdev->num_channels) |
| return NULL; |
| |
| return dma_get_slave_channel(&(bdev->channels[request].vc.chan)); |
| } |
| |
| /** |
| * bam_init |
| * @bdev: bam device |
| * |
| * Initialization helper for global bam registers |
| */ |
| static int bam_init(struct bam_device *bdev) |
| { |
| u32 val; |
| |
| /* read revision and configuration information */ |
| val = readl_relaxed(bam_addr(bdev, 0, BAM_REVISION)) >> NUM_EES_SHIFT; |
| val &= NUM_EES_MASK; |
| |
| /* check that configured EE is within range */ |
| if (bdev->ee >= val) |
| return -EINVAL; |
| |
| val = readl_relaxed(bam_addr(bdev, 0, BAM_NUM_PIPES)); |
| bdev->num_channels = val & BAM_NUM_PIPES_MASK; |
| |
| /* s/w reset bam */ |
| /* after reset all pipes are disabled and idle */ |
| val = readl_relaxed(bam_addr(bdev, 0, BAM_CTRL)); |
| val |= BAM_SW_RST; |
| writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); |
| val &= ~BAM_SW_RST; |
| writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); |
| |
| /* make sure previous stores are visible before enabling BAM */ |
| wmb(); |
| |
| /* enable bam */ |
| val |= BAM_EN; |
| writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); |
| |
| /* set descriptor threshhold, start with 4 bytes */ |
| writel_relaxed(DEFAULT_CNT_THRSHLD, |
| bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD)); |
| |
| /* Enable default set of h/w workarounds, ie all except BAM_FULL_PIPE */ |
| writel_relaxed(BAM_CNFG_BITS_DEFAULT, bam_addr(bdev, 0, BAM_CNFG_BITS)); |
| |
| /* enable irqs for errors */ |
| writel_relaxed(BAM_ERROR_EN | BAM_HRESP_ERR_EN, |
| bam_addr(bdev, 0, BAM_IRQ_EN)); |
| |
| /* unmask global bam interrupt */ |
| writel_relaxed(BAM_IRQ_MSK, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); |
| |
| return 0; |
| } |
| |
| static void bam_channel_init(struct bam_device *bdev, struct bam_chan *bchan, |
| u32 index) |
| { |
| bchan->id = index; |
| bchan->bdev = bdev; |
| |
| vchan_init(&bchan->vc, &bdev->common); |
| bchan->vc.desc_free = bam_dma_free_desc; |
| } |
| |
| static const struct of_device_id bam_of_match[] = { |
| { .compatible = "qcom,bam-v1.3.0", .data = &bam_v1_3_reg_info }, |
| { .compatible = "qcom,bam-v1.4.0", .data = &bam_v1_4_reg_info }, |
| { .compatible = "qcom,bam-v1.7.0", .data = &bam_v1_7_reg_info }, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(of, bam_of_match); |
| |
| static int bam_dma_probe(struct platform_device *pdev) |
| { |
| struct bam_device *bdev; |
| const struct of_device_id *match; |
| struct resource *iores; |
| int ret, i; |
| |
| bdev = devm_kzalloc(&pdev->dev, sizeof(*bdev), GFP_KERNEL); |
| if (!bdev) |
| return -ENOMEM; |
| |
| bdev->dev = &pdev->dev; |
| |
| match = of_match_node(bam_of_match, pdev->dev.of_node); |
| if (!match) { |
| dev_err(&pdev->dev, "Unsupported BAM module\n"); |
| return -ENODEV; |
| } |
| |
| bdev->layout = match->data; |
| |
| iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| bdev->regs = devm_ioremap_resource(&pdev->dev, iores); |
| if (IS_ERR(bdev->regs)) |
| return PTR_ERR(bdev->regs); |
| |
| bdev->irq = platform_get_irq(pdev, 0); |
| if (bdev->irq < 0) |
| return bdev->irq; |
| |
| ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &bdev->ee); |
| if (ret) { |
| dev_err(bdev->dev, "Execution environment unspecified\n"); |
| return ret; |
| } |
| |
| bdev->bamclk = devm_clk_get(bdev->dev, "bam_clk"); |
| if (IS_ERR(bdev->bamclk)) |
| return PTR_ERR(bdev->bamclk); |
| |
| ret = clk_prepare_enable(bdev->bamclk); |
| if (ret) { |
| dev_err(bdev->dev, "failed to prepare/enable clock\n"); |
| return ret; |
| } |
| |
| ret = bam_init(bdev); |
| if (ret) |
| goto err_disable_clk; |
| |
| tasklet_init(&bdev->task, dma_tasklet, (unsigned long)bdev); |
| |
| bdev->channels = devm_kcalloc(bdev->dev, bdev->num_channels, |
| sizeof(*bdev->channels), GFP_KERNEL); |
| |
| if (!bdev->channels) { |
| ret = -ENOMEM; |
| goto err_tasklet_kill; |
| } |
| |
| /* allocate and initialize channels */ |
| INIT_LIST_HEAD(&bdev->common.channels); |
| |
| for (i = 0; i < bdev->num_channels; i++) |
| bam_channel_init(bdev, &bdev->channels[i], i); |
| |
| ret = devm_request_irq(bdev->dev, bdev->irq, bam_dma_irq, |
| IRQF_TRIGGER_HIGH, "bam_dma", bdev); |
| if (ret) |
| goto err_bam_channel_exit; |
| |
| /* set max dma segment size */ |
| bdev->common.dev = bdev->dev; |
| bdev->common.dev->dma_parms = &bdev->dma_parms; |
| ret = dma_set_max_seg_size(bdev->common.dev, BAM_MAX_DATA_SIZE); |
| if (ret) { |
| dev_err(bdev->dev, "cannot set maximum segment size\n"); |
| goto err_bam_channel_exit; |
| } |
| |
| platform_set_drvdata(pdev, bdev); |
| |
| /* set capabilities */ |
| dma_cap_zero(bdev->common.cap_mask); |
| dma_cap_set(DMA_SLAVE, bdev->common.cap_mask); |
| |
| /* initialize dmaengine apis */ |
| bdev->common.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); |
| bdev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT; |
| bdev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; |
| bdev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; |
| bdev->common.device_alloc_chan_resources = bam_alloc_chan; |
| bdev->common.device_free_chan_resources = bam_free_chan; |
| bdev->common.device_prep_slave_sg = bam_prep_slave_sg; |
| bdev->common.device_config = bam_slave_config; |
| bdev->common.device_pause = bam_pause; |
| bdev->common.device_resume = bam_resume; |
| bdev->common.device_terminate_all = bam_dma_terminate_all; |
| bdev->common.device_issue_pending = bam_issue_pending; |
| bdev->common.device_tx_status = bam_tx_status; |
| bdev->common.dev = bdev->dev; |
| |
| ret = dma_async_device_register(&bdev->common); |
| if (ret) { |
| dev_err(bdev->dev, "failed to register dma async device\n"); |
| goto err_bam_channel_exit; |
| } |
| |
| ret = of_dma_controller_register(pdev->dev.of_node, bam_dma_xlate, |
| &bdev->common); |
| if (ret) |
| goto err_unregister_dma; |
| |
| return 0; |
| |
| err_unregister_dma: |
| dma_async_device_unregister(&bdev->common); |
| err_bam_channel_exit: |
| for (i = 0; i < bdev->num_channels; i++) |
| tasklet_kill(&bdev->channels[i].vc.task); |
| err_tasklet_kill: |
| tasklet_kill(&bdev->task); |
| err_disable_clk: |
| clk_disable_unprepare(bdev->bamclk); |
| |
| return ret; |
| } |
| |
| static int bam_dma_remove(struct platform_device *pdev) |
| { |
| struct bam_device *bdev = platform_get_drvdata(pdev); |
| u32 i; |
| |
| of_dma_controller_free(pdev->dev.of_node); |
| dma_async_device_unregister(&bdev->common); |
| |
| /* mask all interrupts for this execution environment */ |
| writel_relaxed(0, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); |
| |
| devm_free_irq(bdev->dev, bdev->irq, bdev); |
| |
| for (i = 0; i < bdev->num_channels; i++) { |
| bam_dma_terminate_all(&bdev->channels[i].vc.chan); |
| tasklet_kill(&bdev->channels[i].vc.task); |
| |
| dma_free_wc(bdev->dev, BAM_DESC_FIFO_SIZE, |
| bdev->channels[i].fifo_virt, |
| bdev->channels[i].fifo_phys); |
| } |
| |
| tasklet_kill(&bdev->task); |
| |
| clk_disable_unprepare(bdev->bamclk); |
| |
| return 0; |
| } |
| |
| static struct platform_driver bam_dma_driver = { |
| .probe = bam_dma_probe, |
| .remove = bam_dma_remove, |
| .driver = { |
| .name = "bam-dma-engine", |
| .of_match_table = bam_of_match, |
| }, |
| }; |
| |
| module_platform_driver(bam_dma_driver); |
| |
| MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>"); |
| MODULE_DESCRIPTION("QCOM BAM DMA engine driver"); |
| MODULE_LICENSE("GPL v2"); |