| /* |
| * USB Attached SCSI |
| * Note that this is not the same as the USB Mass Storage driver |
| * |
| * Copyright Matthew Wilcox for Intel Corp, 2010 |
| * Copyright Sarah Sharp for Intel Corp, 2010 |
| * |
| * Distributed under the terms of the GNU GPL, version two. |
| */ |
| |
| #include <linux/blkdev.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/usb.h> |
| #include <linux/usb/storage.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_dbg.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_tcq.h> |
| |
| /* Common header for all IUs */ |
| struct iu { |
| __u8 iu_id; |
| __u8 rsvd1; |
| __be16 tag; |
| }; |
| |
| enum { |
| IU_ID_COMMAND = 0x01, |
| IU_ID_STATUS = 0x03, |
| IU_ID_RESPONSE = 0x04, |
| IU_ID_TASK_MGMT = 0x05, |
| IU_ID_READ_READY = 0x06, |
| IU_ID_WRITE_READY = 0x07, |
| }; |
| |
| struct command_iu { |
| __u8 iu_id; |
| __u8 rsvd1; |
| __be16 tag; |
| __u8 prio_attr; |
| __u8 rsvd5; |
| __u8 len; |
| __u8 rsvd7; |
| struct scsi_lun lun; |
| __u8 cdb[16]; /* XXX: Overflow-checking tools may misunderstand */ |
| }; |
| |
| struct sense_iu { |
| __u8 iu_id; |
| __u8 rsvd1; |
| __be16 tag; |
| __be16 status_qual; |
| __u8 status; |
| __u8 service_response; |
| __u8 rsvd8[6]; |
| __be16 len; |
| __u8 sense[SCSI_SENSE_BUFFERSIZE]; |
| }; |
| |
| /* |
| * The r00-r01c specs define this version of the SENSE IU data structure. |
| * It's still in use by several different firmware releases. |
| */ |
| struct sense_iu_old { |
| __u8 iu_id; |
| __u8 rsvd1; |
| __be16 tag; |
| __be16 len; |
| __u8 status; |
| __u8 service_response; |
| __u8 sense[SCSI_SENSE_BUFFERSIZE]; |
| }; |
| |
| enum { |
| CMD_PIPE_ID = 1, |
| STATUS_PIPE_ID = 2, |
| DATA_IN_PIPE_ID = 3, |
| DATA_OUT_PIPE_ID = 4, |
| |
| UAS_SIMPLE_TAG = 0, |
| UAS_HEAD_TAG = 1, |
| UAS_ORDERED_TAG = 2, |
| UAS_ACA = 4, |
| }; |
| |
| struct uas_dev_info { |
| struct usb_interface *intf; |
| struct usb_device *udev; |
| int qdepth; |
| unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe; |
| unsigned use_streams:1; |
| unsigned uas_sense_old:1; |
| }; |
| |
| enum { |
| ALLOC_SENSE_URB = (1 << 0), |
| SUBMIT_SENSE_URB = (1 << 1), |
| ALLOC_DATA_IN_URB = (1 << 2), |
| SUBMIT_DATA_IN_URB = (1 << 3), |
| ALLOC_DATA_OUT_URB = (1 << 4), |
| SUBMIT_DATA_OUT_URB = (1 << 5), |
| ALLOC_CMD_URB = (1 << 6), |
| SUBMIT_CMD_URB = (1 << 7), |
| }; |
| |
| /* Overrides scsi_pointer */ |
| struct uas_cmd_info { |
| unsigned int state; |
| unsigned int stream; |
| struct urb *cmd_urb; |
| struct urb *sense_urb; |
| struct urb *data_in_urb; |
| struct urb *data_out_urb; |
| struct list_head list; |
| }; |
| |
| /* I hate forward declarations, but I actually have a loop */ |
| static int uas_submit_urbs(struct scsi_cmnd *cmnd, |
| struct uas_dev_info *devinfo, gfp_t gfp); |
| |
| static DEFINE_SPINLOCK(uas_work_lock); |
| static LIST_HEAD(uas_work_list); |
| |
| static void uas_do_work(struct work_struct *work) |
| { |
| struct uas_cmd_info *cmdinfo; |
| struct list_head list; |
| |
| spin_lock_irq(&uas_work_lock); |
| list_replace_init(&uas_work_list, &list); |
| spin_unlock_irq(&uas_work_lock); |
| |
| list_for_each_entry(cmdinfo, &list, list) { |
| struct scsi_pointer *scp = (void *)cmdinfo; |
| struct scsi_cmnd *cmnd = container_of(scp, |
| struct scsi_cmnd, SCp); |
| uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_KERNEL); |
| } |
| } |
| |
| static DECLARE_WORK(uas_work, uas_do_work); |
| |
| static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd) |
| { |
| struct sense_iu *sense_iu = urb->transfer_buffer; |
| struct scsi_device *sdev = cmnd->device; |
| |
| if (urb->actual_length > 16) { |
| unsigned len = be16_to_cpup(&sense_iu->len); |
| if (len + 16 != urb->actual_length) { |
| int newlen = min(len + 16, urb->actual_length) - 16; |
| if (newlen < 0) |
| newlen = 0; |
| sdev_printk(KERN_INFO, sdev, "%s: urb length %d " |
| "disagrees with IU sense data length %d, " |
| "using %d bytes of sense data\n", __func__, |
| urb->actual_length, len, newlen); |
| len = newlen; |
| } |
| memcpy(cmnd->sense_buffer, sense_iu->sense, len); |
| } |
| |
| cmnd->result = sense_iu->status; |
| if (sdev->current_cmnd) |
| sdev->current_cmnd = NULL; |
| cmnd->scsi_done(cmnd); |
| usb_free_urb(urb); |
| } |
| |
| static void uas_sense_old(struct urb *urb, struct scsi_cmnd *cmnd) |
| { |
| struct sense_iu_old *sense_iu = urb->transfer_buffer; |
| struct scsi_device *sdev = cmnd->device; |
| |
| if (urb->actual_length > 8) { |
| unsigned len = be16_to_cpup(&sense_iu->len) - 2; |
| if (len + 8 != urb->actual_length) { |
| int newlen = min(len + 8, urb->actual_length) - 8; |
| if (newlen < 0) |
| newlen = 0; |
| sdev_printk(KERN_INFO, sdev, "%s: urb length %d " |
| "disagrees with IU sense data length %d, " |
| "using %d bytes of sense data\n", __func__, |
| urb->actual_length, len, newlen); |
| len = newlen; |
| } |
| memcpy(cmnd->sense_buffer, sense_iu->sense, len); |
| } |
| |
| cmnd->result = sense_iu->status; |
| if (sdev->current_cmnd) |
| sdev->current_cmnd = NULL; |
| cmnd->scsi_done(cmnd); |
| usb_free_urb(urb); |
| } |
| |
| static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd, |
| unsigned direction) |
| { |
| struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| int err; |
| |
| cmdinfo->state = direction | SUBMIT_SENSE_URB; |
| err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC); |
| if (err) { |
| spin_lock(&uas_work_lock); |
| list_add_tail(&cmdinfo->list, &uas_work_list); |
| spin_unlock(&uas_work_lock); |
| schedule_work(&uas_work); |
| } |
| } |
| |
| static void uas_stat_cmplt(struct urb *urb) |
| { |
| struct iu *iu = urb->transfer_buffer; |
| struct scsi_device *sdev = urb->context; |
| struct uas_dev_info *devinfo = sdev->hostdata; |
| struct scsi_cmnd *cmnd; |
| u16 tag; |
| |
| if (urb->status) { |
| dev_err(&urb->dev->dev, "URB BAD STATUS %d\n", urb->status); |
| usb_free_urb(urb); |
| return; |
| } |
| |
| tag = be16_to_cpup(&iu->tag) - 1; |
| if (sdev->current_cmnd) |
| cmnd = sdev->current_cmnd; |
| else |
| cmnd = scsi_find_tag(sdev, tag); |
| if (!cmnd) |
| return; |
| |
| switch (iu->iu_id) { |
| case IU_ID_STATUS: |
| if (urb->actual_length < 16) |
| devinfo->uas_sense_old = 1; |
| if (devinfo->uas_sense_old) |
| uas_sense_old(urb, cmnd); |
| else |
| uas_sense(urb, cmnd); |
| break; |
| case IU_ID_READ_READY: |
| uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB); |
| break; |
| case IU_ID_WRITE_READY: |
| uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB); |
| break; |
| default: |
| scmd_printk(KERN_ERR, cmnd, |
| "Bogus IU (%d) received on status pipe\n", iu->iu_id); |
| } |
| } |
| |
| static void uas_data_cmplt(struct urb *urb) |
| { |
| struct scsi_data_buffer *sdb = urb->context; |
| sdb->resid = sdb->length - urb->actual_length; |
| usb_free_urb(urb); |
| } |
| |
| static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp, |
| unsigned int pipe, u16 stream_id, |
| struct scsi_data_buffer *sdb, |
| enum dma_data_direction dir) |
| { |
| struct usb_device *udev = devinfo->udev; |
| struct urb *urb = usb_alloc_urb(0, gfp); |
| |
| if (!urb) |
| goto out; |
| usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, uas_data_cmplt, |
| sdb); |
| if (devinfo->use_streams) |
| urb->stream_id = stream_id; |
| urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0; |
| urb->sg = sdb->table.sgl; |
| out: |
| return urb; |
| } |
| |
| static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp, |
| struct scsi_cmnd *cmnd, u16 stream_id) |
| { |
| struct usb_device *udev = devinfo->udev; |
| struct urb *urb = usb_alloc_urb(0, gfp); |
| struct sense_iu *iu; |
| |
| if (!urb) |
| goto out; |
| |
| iu = kmalloc(sizeof(*iu), gfp); |
| if (!iu) |
| goto free; |
| |
| usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu), |
| uas_stat_cmplt, cmnd->device); |
| urb->stream_id = stream_id; |
| urb->transfer_flags |= URB_FREE_BUFFER; |
| out: |
| return urb; |
| free: |
| usb_free_urb(urb); |
| return NULL; |
| } |
| |
| static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, |
| struct scsi_cmnd *cmnd, u16 stream_id) |
| { |
| struct usb_device *udev = devinfo->udev; |
| struct scsi_device *sdev = cmnd->device; |
| struct urb *urb = usb_alloc_urb(0, gfp); |
| struct command_iu *iu; |
| int len; |
| |
| if (!urb) |
| goto out; |
| |
| len = cmnd->cmd_len - 16; |
| if (len < 0) |
| len = 0; |
| len = ALIGN(len, 4); |
| iu = kmalloc(sizeof(*iu) + len, gfp); |
| if (!iu) |
| goto free; |
| |
| iu->iu_id = IU_ID_COMMAND; |
| iu->tag = cpu_to_be16(stream_id); |
| iu->prio_attr = UAS_SIMPLE_TAG; |
| iu->len = len; |
| int_to_scsilun(sdev->lun, &iu->lun); |
| memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len); |
| |
| usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len, |
| usb_free_urb, NULL); |
| urb->transfer_flags |= URB_FREE_BUFFER; |
| out: |
| return urb; |
| free: |
| usb_free_urb(urb); |
| return NULL; |
| } |
| |
| /* |
| * Why should I request the Status IU before sending the Command IU? Spec |
| * says to, but also says the device may receive them in any order. Seems |
| * daft to me. |
| */ |
| |
| static int uas_submit_urbs(struct scsi_cmnd *cmnd, |
| struct uas_dev_info *devinfo, gfp_t gfp) |
| { |
| struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| |
| if (cmdinfo->state & ALLOC_SENSE_URB) { |
| cmdinfo->sense_urb = uas_alloc_sense_urb(devinfo, gfp, cmnd, |
| cmdinfo->stream); |
| if (!cmdinfo->sense_urb) |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| cmdinfo->state &= ~ALLOC_SENSE_URB; |
| } |
| |
| if (cmdinfo->state & SUBMIT_SENSE_URB) { |
| if (usb_submit_urb(cmdinfo->sense_urb, gfp)) { |
| scmd_printk(KERN_INFO, cmnd, |
| "sense urb submission failure\n"); |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| } |
| cmdinfo->state &= ~SUBMIT_SENSE_URB; |
| } |
| |
| if (cmdinfo->state & ALLOC_DATA_IN_URB) { |
| cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, gfp, |
| devinfo->data_in_pipe, cmdinfo->stream, |
| scsi_in(cmnd), DMA_FROM_DEVICE); |
| if (!cmdinfo->data_in_urb) |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| cmdinfo->state &= ~ALLOC_DATA_IN_URB; |
| } |
| |
| if (cmdinfo->state & SUBMIT_DATA_IN_URB) { |
| if (usb_submit_urb(cmdinfo->data_in_urb, gfp)) { |
| scmd_printk(KERN_INFO, cmnd, |
| "data in urb submission failure\n"); |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| } |
| cmdinfo->state &= ~SUBMIT_DATA_IN_URB; |
| } |
| |
| if (cmdinfo->state & ALLOC_DATA_OUT_URB) { |
| cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, gfp, |
| devinfo->data_out_pipe, cmdinfo->stream, |
| scsi_out(cmnd), DMA_TO_DEVICE); |
| if (!cmdinfo->data_out_urb) |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| cmdinfo->state &= ~ALLOC_DATA_OUT_URB; |
| } |
| |
| if (cmdinfo->state & SUBMIT_DATA_OUT_URB) { |
| if (usb_submit_urb(cmdinfo->data_out_urb, gfp)) { |
| scmd_printk(KERN_INFO, cmnd, |
| "data out urb submission failure\n"); |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| } |
| cmdinfo->state &= ~SUBMIT_DATA_OUT_URB; |
| } |
| |
| if (cmdinfo->state & ALLOC_CMD_URB) { |
| cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, gfp, cmnd, |
| cmdinfo->stream); |
| if (!cmdinfo->cmd_urb) |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| cmdinfo->state &= ~ALLOC_CMD_URB; |
| } |
| |
| if (cmdinfo->state & SUBMIT_CMD_URB) { |
| if (usb_submit_urb(cmdinfo->cmd_urb, gfp)) { |
| scmd_printk(KERN_INFO, cmnd, |
| "cmd urb submission failure\n"); |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| } |
| cmdinfo->state &= ~SUBMIT_CMD_URB; |
| } |
| |
| return 0; |
| } |
| |
| static int uas_queuecommand(struct scsi_cmnd *cmnd, |
| void (*done)(struct scsi_cmnd *)) |
| { |
| struct scsi_device *sdev = cmnd->device; |
| struct uas_dev_info *devinfo = sdev->hostdata; |
| struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; |
| int err; |
| |
| BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer)); |
| |
| if (!cmdinfo->sense_urb && sdev->current_cmnd) |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| |
| if (blk_rq_tagged(cmnd->request)) { |
| cmdinfo->stream = cmnd->request->tag + 1; |
| } else { |
| sdev->current_cmnd = cmnd; |
| cmdinfo->stream = 1; |
| } |
| |
| cmnd->scsi_done = done; |
| |
| cmdinfo->state = ALLOC_SENSE_URB | SUBMIT_SENSE_URB | |
| ALLOC_CMD_URB | SUBMIT_CMD_URB; |
| |
| switch (cmnd->sc_data_direction) { |
| case DMA_FROM_DEVICE: |
| cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; |
| break; |
| case DMA_BIDIRECTIONAL: |
| cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; |
| case DMA_TO_DEVICE: |
| cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB; |
| case DMA_NONE: |
| break; |
| } |
| |
| if (!devinfo->use_streams) { |
| cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB); |
| cmdinfo->stream = 0; |
| } |
| |
| err = uas_submit_urbs(cmnd, devinfo, GFP_ATOMIC); |
| if (err) { |
| /* If we did nothing, give up now */ |
| if (cmdinfo->state & SUBMIT_SENSE_URB) { |
| usb_free_urb(cmdinfo->sense_urb); |
| return SCSI_MLQUEUE_DEVICE_BUSY; |
| } |
| spin_lock(&uas_work_lock); |
| list_add_tail(&cmdinfo->list, &uas_work_list); |
| spin_unlock(&uas_work_lock); |
| schedule_work(&uas_work); |
| } |
| |
| return 0; |
| } |
| |
| static int uas_eh_abort_handler(struct scsi_cmnd *cmnd) |
| { |
| struct scsi_device *sdev = cmnd->device; |
| sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__, |
| cmnd->request->tag); |
| |
| /* XXX: Send ABORT TASK Task Management command */ |
| return FAILED; |
| } |
| |
| static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd) |
| { |
| struct scsi_device *sdev = cmnd->device; |
| sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__, |
| cmnd->request->tag); |
| |
| /* XXX: Send LOGICAL UNIT RESET Task Management command */ |
| return FAILED; |
| } |
| |
| static int uas_eh_target_reset_handler(struct scsi_cmnd *cmnd) |
| { |
| struct scsi_device *sdev = cmnd->device; |
| sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__, |
| cmnd->request->tag); |
| |
| /* XXX: Can we reset just the one USB interface? |
| * Would calling usb_set_interface() have the right effect? |
| */ |
| return FAILED; |
| } |
| |
| static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd) |
| { |
| struct scsi_device *sdev = cmnd->device; |
| struct uas_dev_info *devinfo = sdev->hostdata; |
| struct usb_device *udev = devinfo->udev; |
| |
| sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__, |
| cmnd->request->tag); |
| |
| if (usb_reset_device(udev)) |
| return SUCCESS; |
| |
| return FAILED; |
| } |
| |
| static int uas_slave_alloc(struct scsi_device *sdev) |
| { |
| sdev->hostdata = (void *)sdev->host->hostdata[0]; |
| return 0; |
| } |
| |
| static int uas_slave_configure(struct scsi_device *sdev) |
| { |
| struct uas_dev_info *devinfo = sdev->hostdata; |
| scsi_set_tag_type(sdev, MSG_ORDERED_TAG); |
| scsi_activate_tcq(sdev, devinfo->qdepth - 1); |
| return 0; |
| } |
| |
| static struct scsi_host_template uas_host_template = { |
| .module = THIS_MODULE, |
| .name = "uas", |
| .queuecommand = uas_queuecommand, |
| .slave_alloc = uas_slave_alloc, |
| .slave_configure = uas_slave_configure, |
| .eh_abort_handler = uas_eh_abort_handler, |
| .eh_device_reset_handler = uas_eh_device_reset_handler, |
| .eh_target_reset_handler = uas_eh_target_reset_handler, |
| .eh_bus_reset_handler = uas_eh_bus_reset_handler, |
| .can_queue = 65536, /* Is there a limit on the _host_ ? */ |
| .this_id = -1, |
| .sg_tablesize = SG_NONE, |
| .cmd_per_lun = 1, /* until we override it */ |
| .skip_settle_delay = 1, |
| .ordered_tag = 1, |
| }; |
| |
| static struct usb_device_id uas_usb_ids[] = { |
| { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) }, |
| { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) }, |
| /* 0xaa is a prototype device I happen to have access to */ |
| { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, 0xaa) }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(usb, uas_usb_ids); |
| |
| static void uas_configure_endpoints(struct uas_dev_info *devinfo) |
| { |
| struct usb_host_endpoint *eps[4] = { }; |
| struct usb_interface *intf = devinfo->intf; |
| struct usb_device *udev = devinfo->udev; |
| struct usb_host_endpoint *endpoint = intf->cur_altsetting->endpoint; |
| unsigned i, n_endpoints = intf->cur_altsetting->desc.bNumEndpoints; |
| |
| devinfo->uas_sense_old = 0; |
| |
| for (i = 0; i < n_endpoints; i++) { |
| unsigned char *extra = endpoint[i].extra; |
| int len = endpoint[i].extralen; |
| while (len > 1) { |
| if (extra[1] == USB_DT_PIPE_USAGE) { |
| unsigned pipe_id = extra[2]; |
| if (pipe_id > 0 && pipe_id < 5) |
| eps[pipe_id - 1] = &endpoint[i]; |
| break; |
| } |
| len -= extra[0]; |
| extra += extra[0]; |
| } |
| } |
| |
| /* |
| * Assume that if we didn't find a control pipe descriptor, we're |
| * using a device with old firmware that happens to be set up like |
| * this. |
| */ |
| if (!eps[0]) { |
| devinfo->cmd_pipe = usb_sndbulkpipe(udev, 1); |
| devinfo->status_pipe = usb_rcvbulkpipe(udev, 1); |
| devinfo->data_in_pipe = usb_rcvbulkpipe(udev, 2); |
| devinfo->data_out_pipe = usb_sndbulkpipe(udev, 2); |
| |
| eps[1] = usb_pipe_endpoint(udev, devinfo->status_pipe); |
| eps[2] = usb_pipe_endpoint(udev, devinfo->data_in_pipe); |
| eps[3] = usb_pipe_endpoint(udev, devinfo->data_out_pipe); |
| } else { |
| devinfo->cmd_pipe = usb_sndbulkpipe(udev, |
| eps[0]->desc.bEndpointAddress); |
| devinfo->status_pipe = usb_rcvbulkpipe(udev, |
| eps[1]->desc.bEndpointAddress); |
| devinfo->data_in_pipe = usb_rcvbulkpipe(udev, |
| eps[2]->desc.bEndpointAddress); |
| devinfo->data_out_pipe = usb_sndbulkpipe(udev, |
| eps[3]->desc.bEndpointAddress); |
| } |
| |
| devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1, 3, 256, |
| GFP_KERNEL); |
| if (devinfo->qdepth < 0) { |
| devinfo->qdepth = 256; |
| devinfo->use_streams = 0; |
| } else { |
| devinfo->use_streams = 1; |
| } |
| } |
| |
| /* |
| * XXX: What I'd like to do here is register a SCSI host for each USB host in |
| * the system. Follow usb-storage's design of registering a SCSI host for |
| * each USB device for the moment. Can implement this by walking up the |
| * USB hierarchy until we find a USB host. |
| */ |
| static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) |
| { |
| int result; |
| struct Scsi_Host *shost; |
| struct uas_dev_info *devinfo; |
| struct usb_device *udev = interface_to_usbdev(intf); |
| |
| if (id->bInterfaceProtocol == 0x50) { |
| int ifnum = intf->cur_altsetting->desc.bInterfaceNumber; |
| /* XXX: Shouldn't assume that 1 is the alternative we want */ |
| int ret = usb_set_interface(udev, ifnum, 1); |
| if (ret) |
| return -ENODEV; |
| } |
| |
| devinfo = kmalloc(sizeof(struct uas_dev_info), GFP_KERNEL); |
| if (!devinfo) |
| return -ENOMEM; |
| |
| result = -ENOMEM; |
| shost = scsi_host_alloc(&uas_host_template, sizeof(void *)); |
| if (!shost) |
| goto free; |
| |
| shost->max_cmd_len = 16 + 252; |
| shost->max_id = 1; |
| shost->sg_tablesize = udev->bus->sg_tablesize; |
| |
| result = scsi_add_host(shost, &intf->dev); |
| if (result) |
| goto free; |
| shost->hostdata[0] = (unsigned long)devinfo; |
| |
| devinfo->intf = intf; |
| devinfo->udev = udev; |
| uas_configure_endpoints(devinfo); |
| |
| scsi_scan_host(shost); |
| usb_set_intfdata(intf, shost); |
| return result; |
| free: |
| kfree(devinfo); |
| if (shost) |
| scsi_host_put(shost); |
| return result; |
| } |
| |
| static int uas_pre_reset(struct usb_interface *intf) |
| { |
| /* XXX: Need to return 1 if it's not our device in error handling */ |
| return 0; |
| } |
| |
| static int uas_post_reset(struct usb_interface *intf) |
| { |
| /* XXX: Need to return 1 if it's not our device in error handling */ |
| return 0; |
| } |
| |
| static void uas_disconnect(struct usb_interface *intf) |
| { |
| struct usb_device *udev = interface_to_usbdev(intf); |
| struct usb_host_endpoint *eps[3]; |
| struct Scsi_Host *shost = usb_get_intfdata(intf); |
| struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; |
| |
| scsi_remove_host(shost); |
| |
| eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe); |
| eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe); |
| eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe); |
| usb_free_streams(intf, eps, 3, GFP_KERNEL); |
| |
| kfree(devinfo); |
| } |
| |
| /* |
| * XXX: Should this plug into libusual so we can auto-upgrade devices from |
| * Bulk-Only to UAS? |
| */ |
| static struct usb_driver uas_driver = { |
| .name = "uas", |
| .probe = uas_probe, |
| .disconnect = uas_disconnect, |
| .pre_reset = uas_pre_reset, |
| .post_reset = uas_post_reset, |
| .id_table = uas_usb_ids, |
| }; |
| |
| static int uas_init(void) |
| { |
| return usb_register(&uas_driver); |
| } |
| |
| static void uas_exit(void) |
| { |
| usb_deregister(&uas_driver); |
| } |
| |
| module_init(uas_init); |
| module_exit(uas_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Matthew Wilcox and Sarah Sharp"); |