arch/tile/include/asm/irqflags.h - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /*
  * Copyright 2010 Tilera Corporation. All Rights Reserved.
  *
  *   This program is free software; you can redistribute it and/or
  *   modify it under the terms of the GNU General Public License
  *   as published by the Free Software Foundation, version 2.
  *
  *   This program is distributed in the hope that it will be useful, but
  *   WITHOUT ANY WARRANTY; without even the implied warranty of
  *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  *   NON INFRINGEMENT.  See the GNU General Public License for
  *   more details.
  */

 #ifndef _ASM_TILE_IRQFLAGS_H
 #define _ASM_TILE_IRQFLAGS_H

 #include <arch/interrupts.h>
 #include <arch/chip.h>

 #if !defined(__tilegx__) && defined(__ASSEMBLY__)

 /*
  * The set of interrupts we want to allow when interrupts are nominally
  * disabled.  The remainder are effectively "NMI" interrupts from
  * the point of view of the generic Linux code.  Note that synchronous
  * interrupts (aka "non-queued") are not blocked by the mask in any case.
  */
 #if CHIP_HAS_AUX_PERF_COUNTERS()
 #define LINUX_MASKABLE_INTERRUPTS_HI \
 	(~(INT_MASK_HI(INT_PERF_COUNT) | INT_MASK_HI(INT_AUX_PERF_COUNT)))
 #else
 #define LINUX_MASKABLE_INTERRUPTS_HI \
 	(~(INT_MASK_HI(INT_PERF_COUNT)))
 #endif

 #else

 #if CHIP_HAS_AUX_PERF_COUNTERS()
 #define LINUX_MASKABLE_INTERRUPTS \
 	(~(INT_MASK(INT_PERF_COUNT) | INT_MASK(INT_AUX_PERF_COUNT)))
 #else
 #define LINUX_MASKABLE_INTERRUPTS \
 	(~(INT_MASK(INT_PERF_COUNT)))
 #endif

 #endif

 #ifndef __ASSEMBLY__

 /* NOTE: we can't include <linux/percpu.h> due to #include dependencies. */
 #include <asm/percpu.h>
 #include <arch/spr_def.h>

 /* Set and clear kernel interrupt masks. */
 #if CHIP_HAS_SPLIT_INTR_MASK()
 #if INT_PERF_COUNT < 32 || INT_AUX_PERF_COUNT < 32 || INT_MEM_ERROR >= 32
 # error Fix assumptions about which word various interrupts are in
 #endif
 #define interrupt_mask_set(n) do { \
 	int __n = (n); \
 	int __mask = 1 << (__n & 0x1f); \
 	if (__n < 32) \
 		__insn_mtspr(SPR_INTERRUPT_MASK_SET_K_0, __mask); \
 	else \
 		__insn_mtspr(SPR_INTERRUPT_MASK_SET_K_1, __mask); \
 } while (0)
 #define interrupt_mask_reset(n) do { \
 	int __n = (n); \
 	int __mask = 1 << (__n & 0x1f); \
 	if (__n < 32) \
 		__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, __mask); \
 	else \
 		__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, __mask); \
 } while (0)
 #define interrupt_mask_check(n) ({ \
 	int __n = (n); \
 	(((__n < 32) ? \
 	 __insn_mfspr(SPR_INTERRUPT_MASK_K_0) : \
 	 __insn_mfspr(SPR_INTERRUPT_MASK_K_1)) \
 	  >> (__n & 0x1f)) & 1; \
 })
 #define interrupt_mask_set_mask(mask) do { \
 	unsigned long long __m = (mask); \
 	__insn_mtspr(SPR_INTERRUPT_MASK_SET_K_0, (unsigned long)(__m)); \
 	__insn_mtspr(SPR_INTERRUPT_MASK_SET_K_1, (unsigned long)(__m>>32)); \
 } while (0)
 #define interrupt_mask_reset_mask(mask) do { \
 	unsigned long long __m = (mask); \
 	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, (unsigned long)(__m)); \
 	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, (unsigned long)(__m>>32)); \
 } while (0)
 #define interrupt_mask_save_mask() \
 	(__insn_mfspr(SPR_INTERRUPT_MASK_SET_K_0) | \
 	 (((unsigned long long)__insn_mfspr(SPR_INTERRUPT_MASK_SET_K_1))<<32))
 #define interrupt_mask_restore_mask(mask) do { \
 	unsigned long long __m = (mask); \
 	__insn_mtspr(SPR_INTERRUPT_MASK_K_0, (unsigned long)(__m)); \
 	__insn_mtspr(SPR_INTERRUPT_MASK_K_1, (unsigned long)(__m>>32)); \
 } while (0)
 #else
 #define interrupt_mask_set(n) \
 	__insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (1UL << (n)))
 #define interrupt_mask_reset(n) \
 	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (1UL << (n)))
 #define interrupt_mask_check(n) \
 	((__insn_mfspr(SPR_INTERRUPT_MASK_K) >> (n)) & 1)
 #define interrupt_mask_set_mask(mask) \
 	__insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (mask))
 #define interrupt_mask_reset_mask(mask) \
 	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (mask))
 #define interrupt_mask_save_mask() \
 	__insn_mfspr(SPR_INTERRUPT_MASK_K)
 #define interrupt_mask_restore_mask(mask) \
 	__insn_mtspr(SPR_INTERRUPT_MASK_K, (mask))
 #endif

 /*
  * The set of interrupts we want active if irqs are enabled.
  * Note that in particular, the tile timer interrupt comes and goes
  * from this set, since we have no other way to turn off the timer.
  * Likewise, INTCTRL_K is removed and re-added during device
  * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
  * We use a low bit (MEM_ERROR) as our sentinel value and make sure it
  * is always claimed as an "active interrupt" so we can query that bit
  * to know our current state.
  */
 DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
 #define INITIAL_INTERRUPTS_ENABLED INT_MASK(INT_MEM_ERROR)

 /* Disable interrupts. */
 #define arch_local_irq_disable() \
 	interrupt_mask_set_mask(LINUX_MASKABLE_INTERRUPTS)

 /* Disable all interrupts, including NMIs. */
 #define arch_local_irq_disable_all() \
 	interrupt_mask_set_mask(-1ULL)

 /* Re-enable all maskable interrupts. */
 #define arch_local_irq_enable() \
 	interrupt_mask_reset_mask(__get_cpu_var(interrupts_enabled_mask))

 /* Disable or enable interrupts based on flag argument. */
 #define arch_local_irq_restore(disabled) do { \
 	if (disabled) \
 		arch_local_irq_disable(); \
 	else \
 		arch_local_irq_enable(); \
 } while (0)

 /* Return true if "flags" argument means interrupts are disabled. */
 #define arch_irqs_disabled_flags(flags) ((flags) != 0)

 /* Return true if interrupts are currently disabled. */
 #define arch_irqs_disabled() interrupt_mask_check(INT_MEM_ERROR)

 /* Save whether interrupts are currently disabled. */
 #define arch_local_save_flags() arch_irqs_disabled()

 /* Save whether interrupts are currently disabled, then disable them. */
 #define arch_local_irq_save() ({ \
 	unsigned long __flags = arch_local_save_flags(); \
 	arch_local_irq_disable(); \
 	__flags; })

 /* Prevent the given interrupt from being enabled next time we enable irqs. */
 #define arch_local_irq_mask(interrupt) \
 	(__get_cpu_var(interrupts_enabled_mask) &= ~INT_MASK(interrupt))

 /* Prevent the given interrupt from being enabled immediately. */
 #define arch_local_irq_mask_now(interrupt) do { \
 	arch_local_irq_mask(interrupt); \
 	interrupt_mask_set(interrupt); \
 } while (0)

 /* Allow the given interrupt to be enabled next time we enable irqs. */
 #define arch_local_irq_unmask(interrupt) \
 	(__get_cpu_var(interrupts_enabled_mask) |= INT_MASK(interrupt))

 /* Allow the given interrupt to be enabled immediately, if !irqs_disabled. */
 #define arch_local_irq_unmask_now(interrupt) do { \
 	arch_local_irq_unmask(interrupt); \
 	if (!irqs_disabled()) \
 		interrupt_mask_reset(interrupt); \
 } while (0)

 #else /* __ASSEMBLY__ */

 /* We provide a somewhat more restricted set for assembly. */

 #ifdef __tilegx__

 #if INT_MEM_ERROR != 0
 # error Fix IRQS_DISABLED() macro
 #endif

 /* Return 0 or 1 to indicate whether interrupts are currently disabled. */
 #define IRQS_DISABLED(tmp)					\
 	mfspr   tmp, SPR_INTERRUPT_MASK_K;			\
 	andi    tmp, tmp, 1

 /* Load up a pointer to &interrupts_enabled_mask. */
 #define GET_INTERRUPTS_ENABLED_MASK_PTR(reg)			\
 	moveli reg, hw2_last(interrupts_enabled_mask);		\
 	shl16insli reg, reg, hw1(interrupts_enabled_mask);	\
 	shl16insli reg, reg, hw0(interrupts_enabled_mask);	\
 	add     reg, reg, tp

 /* Disable interrupts. */
 #define IRQ_DISABLE(tmp0, tmp1)					\
 	moveli  tmp0, hw2_last(LINUX_MASKABLE_INTERRUPTS);	\
 	shl16insli tmp0, tmp0, hw1(LINUX_MASKABLE_INTERRUPTS);	\
 	shl16insli tmp0, tmp0, hw0(LINUX_MASKABLE_INTERRUPTS);	\
 	mtspr   SPR_INTERRUPT_MASK_SET_K, tmp0

 /* Disable ALL synchronous interrupts (used by NMI entry). */
 #define IRQ_DISABLE_ALL(tmp)					\
 	movei   tmp, -1;					\
 	mtspr   SPR_INTERRUPT_MASK_SET_K, tmp

 /* Enable interrupts. */
 #define IRQ_ENABLE_LOAD(tmp0, tmp1)				\
 	GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0);			\
 	ld      tmp0, tmp0
 #define IRQ_ENABLE_APPLY(tmp0, tmp1)				\
 	mtspr   SPR_INTERRUPT_MASK_RESET_K, tmp0

 #else /* !__tilegx__ */

 /*
  * Return 0 or 1 to indicate whether interrupts are currently disabled.
  * Note that it's important that we use a bit from the "low" mask word,
  * since when we are enabling, that is the word we write first, so if we
  * are interrupted after only writing half of the mask, the interrupt
  * handler will correctly observe that we have interrupts enabled, and
  * will enable interrupts itself on return from the interrupt handler
  * (making the original code's write of the "high" mask word idempotent).
  */
 #define IRQS_DISABLED(tmp)					\
 	mfspr   tmp, SPR_INTERRUPT_MASK_K_0;			\
 	shri    tmp, tmp, INT_MEM_ERROR;			\
 	andi    tmp, tmp, 1

 /* Load up a pointer to &interrupts_enabled_mask. */
 #define GET_INTERRUPTS_ENABLED_MASK_PTR(reg)			\
 	moveli  reg, lo16(interrupts_enabled_mask);		\
 	auli    reg, reg, ha16(interrupts_enabled_mask);	\
 	add     reg, reg, tp

 /* Disable interrupts. */
 #define IRQ_DISABLE(tmp0, tmp1)					\
 	{							\
 	 movei  tmp0, -1;					\
 	 moveli tmp1, lo16(LINUX_MASKABLE_INTERRUPTS_HI)	\
 	};							\
 	{							\
 	 mtspr  SPR_INTERRUPT_MASK_SET_K_0, tmp0;		\
 	 auli   tmp1, tmp1, ha16(LINUX_MASKABLE_INTERRUPTS_HI)	\
 	};							\
 	mtspr   SPR_INTERRUPT_MASK_SET_K_1, tmp1

 /* Disable ALL synchronous interrupts (used by NMI entry). */
 #define IRQ_DISABLE_ALL(tmp)					\
 	movei   tmp, -1;					\
 	mtspr   SPR_INTERRUPT_MASK_SET_K_0, tmp;		\
 	mtspr   SPR_INTERRUPT_MASK_SET_K_1, tmp

 /* Enable interrupts. */
 #define IRQ_ENABLE_LOAD(tmp0, tmp1)				\
 	GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0);			\
 	{							\
 	 lw     tmp0, tmp0;					\
 	 addi   tmp1, tmp0, 4					\
 	};							\
 	lw      tmp1, tmp1
 #define IRQ_ENABLE_APPLY(tmp0, tmp1)				\
 	mtspr   SPR_INTERRUPT_MASK_RESET_K_0, tmp0;		\
 	mtspr   SPR_INTERRUPT_MASK_RESET_K_1, tmp1
 #endif

 #define IRQ_ENABLE(tmp0, tmp1)					\
 	IRQ_ENABLE_LOAD(tmp0, tmp1);				\
 	IRQ_ENABLE_APPLY(tmp0, tmp1)

 /*
  * Do the CPU's IRQ-state tracing from assembly code. We call a
  * C function, but almost everywhere we do, we don't mind clobbering
  * all the caller-saved registers.
  */
 #ifdef CONFIG_TRACE_IRQFLAGS
 # define TRACE_IRQS_ON  jal trace_hardirqs_on
 # define TRACE_IRQS_OFF jal trace_hardirqs_off
 #else
 # define TRACE_IRQS_ON
 # define TRACE_IRQS_OFF
 #endif

 #endif /* __ASSEMBLY__ */

 #endif /* _ASM_TILE_IRQFLAGS_H */
	/*
	* Copyright 2010 Tilera Corporation. All Rights Reserved.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation, version 2.
	*
	* This program is distributed in the hope that it will be useful, but
	* WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
	* NON INFRINGEMENT. See the GNU General Public License for
	* more details.
	*/

	#ifndef _ASM_TILE_IRQFLAGS_H
	#define _ASM_TILE_IRQFLAGS_H

	#include <arch/interrupts.h>
	#include <arch/chip.h>

	#if !defined(__tilegx__) && defined(__ASSEMBLY__)

	/*
	* The set of interrupts we want to allow when interrupts are nominally
	* disabled. The remainder are effectively "NMI" interrupts from
	* the point of view of the generic Linux code. Note that synchronous
	* interrupts (aka "non-queued") are not blocked by the mask in any case.
	*/
	#if CHIP_HAS_AUX_PERF_COUNTERS()
	#define LINUX_MASKABLE_INTERRUPTS_HI \
	(~(INT_MASK_HI(INT_PERF_COUNT) \| INT_MASK_HI(INT_AUX_PERF_COUNT)))
	#else
	#define LINUX_MASKABLE_INTERRUPTS_HI \
	(~(INT_MASK_HI(INT_PERF_COUNT)))
	#endif

	#else

	#if CHIP_HAS_AUX_PERF_COUNTERS()
	#define LINUX_MASKABLE_INTERRUPTS \
	(~(INT_MASK(INT_PERF_COUNT) \| INT_MASK(INT_AUX_PERF_COUNT)))
	#else
	#define LINUX_MASKABLE_INTERRUPTS \
	(~(INT_MASK(INT_PERF_COUNT)))
	#endif

	#endif

	#ifndef __ASSEMBLY__

	/* NOTE: we can't include <linux/percpu.h> due to #include dependencies. */
	#include <asm/percpu.h>
	#include <arch/spr_def.h>

	/* Set and clear kernel interrupt masks. */
	#if CHIP_HAS_SPLIT_INTR_MASK()
	#if INT_PERF_COUNT < 32 \|\| INT_AUX_PERF_COUNT < 32 \|\| INT_MEM_ERROR >= 32
	# error Fix assumptions about which word various interrupts are in
	#endif
	#define interrupt_mask_set(n) do { \
	int __n = (n); \
	int __mask = 1 << (__n & 0x1f); \
	if (__n < 32) \
	__insn_mtspr(SPR_INTERRUPT_MASK_SET_K_0, __mask); \
	else \
	__insn_mtspr(SPR_INTERRUPT_MASK_SET_K_1, __mask); \
	} while (0)
	#define interrupt_mask_reset(n) do { \
	int __n = (n); \
	int __mask = 1 << (__n & 0x1f); \
	if (__n < 32) \
	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, __mask); \
	else \
	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, __mask); \
	} while (0)
	#define interrupt_mask_check(n) ({ \
	int __n = (n); \
	(((__n < 32) ? \
	__insn_mfspr(SPR_INTERRUPT_MASK_K_0) : \
	__insn_mfspr(SPR_INTERRUPT_MASK_K_1)) \
	>> (__n & 0x1f)) & 1; \
	})
	#define interrupt_mask_set_mask(mask) do { \
	unsigned long long __m = (mask); \
	__insn_mtspr(SPR_INTERRUPT_MASK_SET_K_0, (unsigned long)(__m)); \
	__insn_mtspr(SPR_INTERRUPT_MASK_SET_K_1, (unsigned long)(__m>>32)); \
	} while (0)
	#define interrupt_mask_reset_mask(mask) do { \
	unsigned long long __m = (mask); \
	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, (unsigned long)(__m)); \
	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, (unsigned long)(__m>>32)); \
	} while (0)
	#define interrupt_mask_save_mask() \
	(__insn_mfspr(SPR_INTERRUPT_MASK_SET_K_0) \| \
	(((unsigned long long)__insn_mfspr(SPR_INTERRUPT_MASK_SET_K_1))<<32))
	#define interrupt_mask_restore_mask(mask) do { \
	unsigned long long __m = (mask); \
	__insn_mtspr(SPR_INTERRUPT_MASK_K_0, (unsigned long)(__m)); \
	__insn_mtspr(SPR_INTERRUPT_MASK_K_1, (unsigned long)(__m>>32)); \
	} while (0)
	#else
	#define interrupt_mask_set(n) \
	__insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (1UL << (n)))
	#define interrupt_mask_reset(n) \
	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (1UL << (n)))
	#define interrupt_mask_check(n) \
	((__insn_mfspr(SPR_INTERRUPT_MASK_K) >> (n)) & 1)
	#define interrupt_mask_set_mask(mask) \
	__insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (mask))
	#define interrupt_mask_reset_mask(mask) \
	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (mask))
	#define interrupt_mask_save_mask() \
	__insn_mfspr(SPR_INTERRUPT_MASK_K)
	#define interrupt_mask_restore_mask(mask) \
	__insn_mtspr(SPR_INTERRUPT_MASK_K, (mask))
	#endif

	/*
	* The set of interrupts we want active if irqs are enabled.
	* Note that in particular, the tile timer interrupt comes and goes
	* from this set, since we have no other way to turn off the timer.
	* Likewise, INTCTRL_K is removed and re-added during device
	* interrupts, as is the the hardwall UDN_FIREWALL interrupt.
	* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
	* is always claimed as an "active interrupt" so we can query that bit
	* to know our current state.
	*/
	DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
	#define INITIAL_INTERRUPTS_ENABLED INT_MASK(INT_MEM_ERROR)

	/* Disable interrupts. */
	#define arch_local_irq_disable() \
	interrupt_mask_set_mask(LINUX_MASKABLE_INTERRUPTS)

	/* Disable all interrupts, including NMIs. */
	#define arch_local_irq_disable_all() \
	interrupt_mask_set_mask(-1ULL)

	/* Re-enable all maskable interrupts. */
	#define arch_local_irq_enable() \
	interrupt_mask_reset_mask(__get_cpu_var(interrupts_enabled_mask))

	/* Disable or enable interrupts based on flag argument. */
	#define arch_local_irq_restore(disabled) do { \
	if (disabled) \
	arch_local_irq_disable(); \
	else \
	arch_local_irq_enable(); \
	} while (0)

	/* Return true if "flags" argument means interrupts are disabled. */
	#define arch_irqs_disabled_flags(flags) ((flags) != 0)

	/* Return true if interrupts are currently disabled. */
	#define arch_irqs_disabled() interrupt_mask_check(INT_MEM_ERROR)

	/* Save whether interrupts are currently disabled. */
	#define arch_local_save_flags() arch_irqs_disabled()

	/* Save whether interrupts are currently disabled, then disable them. */
	#define arch_local_irq_save() ({ \
	unsigned long __flags = arch_local_save_flags(); \
	arch_local_irq_disable(); \
	__flags; })

	/* Prevent the given interrupt from being enabled next time we enable irqs. */
	#define arch_local_irq_mask(interrupt) \
	(__get_cpu_var(interrupts_enabled_mask) &= ~INT_MASK(interrupt))

	/* Prevent the given interrupt from being enabled immediately. */
	#define arch_local_irq_mask_now(interrupt) do { \
	arch_local_irq_mask(interrupt); \
	interrupt_mask_set(interrupt); \
	} while (0)

	/* Allow the given interrupt to be enabled next time we enable irqs. */
	#define arch_local_irq_unmask(interrupt) \
	(__get_cpu_var(interrupts_enabled_mask) \|= INT_MASK(interrupt))

	/* Allow the given interrupt to be enabled immediately, if !irqs_disabled. */
	#define arch_local_irq_unmask_now(interrupt) do { \
	arch_local_irq_unmask(interrupt); \
	if (!irqs_disabled()) \
	interrupt_mask_reset(interrupt); \
	} while (0)

	#else /* __ASSEMBLY__ */

	/* We provide a somewhat more restricted set for assembly. */

	#ifdef __tilegx__

	#if INT_MEM_ERROR != 0
	# error Fix IRQS_DISABLED() macro
	#endif

	/* Return 0 or 1 to indicate whether interrupts are currently disabled. */
	#define IRQS_DISABLED(tmp) \
	mfspr tmp, SPR_INTERRUPT_MASK_K; \
	andi tmp, tmp, 1

	/* Load up a pointer to &interrupts_enabled_mask. */
	#define GET_INTERRUPTS_ENABLED_MASK_PTR(reg) \
	moveli reg, hw2_last(interrupts_enabled_mask); \
	shl16insli reg, reg, hw1(interrupts_enabled_mask); \
	shl16insli reg, reg, hw0(interrupts_enabled_mask); \
	add reg, reg, tp

	/* Disable interrupts. */
	#define IRQ_DISABLE(tmp0, tmp1) \
	moveli tmp0, hw2_last(LINUX_MASKABLE_INTERRUPTS); \
	shl16insli tmp0, tmp0, hw1(LINUX_MASKABLE_INTERRUPTS); \
	shl16insli tmp0, tmp0, hw0(LINUX_MASKABLE_INTERRUPTS); \
	mtspr SPR_INTERRUPT_MASK_SET_K, tmp0

	/* Disable ALL synchronous interrupts (used by NMI entry). */
	#define IRQ_DISABLE_ALL(tmp) \
	movei tmp, -1; \
	mtspr SPR_INTERRUPT_MASK_SET_K, tmp

	/* Enable interrupts. */
	#define IRQ_ENABLE_LOAD(tmp0, tmp1) \
	GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \
	ld tmp0, tmp0
	#define IRQ_ENABLE_APPLY(tmp0, tmp1) \
	mtspr SPR_INTERRUPT_MASK_RESET_K, tmp0

	#else /* !__tilegx__ */

	/*
	* Return 0 or 1 to indicate whether interrupts are currently disabled.
	* Note that it's important that we use a bit from the "low" mask word,
	* since when we are enabling, that is the word we write first, so if we
	* are interrupted after only writing half of the mask, the interrupt
	* handler will correctly observe that we have interrupts enabled, and
	* will enable interrupts itself on return from the interrupt handler
	* (making the original code's write of the "high" mask word idempotent).
	*/
	#define IRQS_DISABLED(tmp) \
	mfspr tmp, SPR_INTERRUPT_MASK_K_0; \
	shri tmp, tmp, INT_MEM_ERROR; \
	andi tmp, tmp, 1

	/* Load up a pointer to &interrupts_enabled_mask. */
	#define GET_INTERRUPTS_ENABLED_MASK_PTR(reg) \
	moveli reg, lo16(interrupts_enabled_mask); \
	auli reg, reg, ha16(interrupts_enabled_mask); \
	add reg, reg, tp

	/* Disable interrupts. */
	#define IRQ_DISABLE(tmp0, tmp1) \
	{ \
	movei tmp0, -1; \
	moveli tmp1, lo16(LINUX_MASKABLE_INTERRUPTS_HI) \
	}; \
	{ \
	mtspr SPR_INTERRUPT_MASK_SET_K_0, tmp0; \
	auli tmp1, tmp1, ha16(LINUX_MASKABLE_INTERRUPTS_HI) \
	}; \
	mtspr SPR_INTERRUPT_MASK_SET_K_1, tmp1

	/* Disable ALL synchronous interrupts (used by NMI entry). */
	#define IRQ_DISABLE_ALL(tmp) \
	movei tmp, -1; \
	mtspr SPR_INTERRUPT_MASK_SET_K_0, tmp; \
	mtspr SPR_INTERRUPT_MASK_SET_K_1, tmp

	/* Enable interrupts. */
	#define IRQ_ENABLE_LOAD(tmp0, tmp1) \
	GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \
	{ \
	lw tmp0, tmp0; \
	addi tmp1, tmp0, 4 \
	}; \
	lw tmp1, tmp1
	#define IRQ_ENABLE_APPLY(tmp0, tmp1) \
	mtspr SPR_INTERRUPT_MASK_RESET_K_0, tmp0; \
	mtspr SPR_INTERRUPT_MASK_RESET_K_1, tmp1
	#endif

	#define IRQ_ENABLE(tmp0, tmp1) \
	IRQ_ENABLE_LOAD(tmp0, tmp1); \
	IRQ_ENABLE_APPLY(tmp0, tmp1)

	/*
	* Do the CPU's IRQ-state tracing from assembly code. We call a
	* C function, but almost everywhere we do, we don't mind clobbering
	* all the caller-saved registers.
	*/
	#ifdef CONFIG_TRACE_IRQFLAGS
	# define TRACE_IRQS_ON jal trace_hardirqs_on
	# define TRACE_IRQS_OFF jal trace_hardirqs_off
	#else
	# define TRACE_IRQS_ON
	# define TRACE_IRQS_OFF
	#endif

	#endif /* __ASSEMBLY__ */

	#endif /* _ASM_TILE_IRQFLAGS_H */