| if ARCH_AT91 |
| |
| menu "Atmel AT91 System-on-Chip" |
| |
| choice |
| prompt "Atmel AT91 Processor" |
| |
| config ARCH_AT91RM9200 |
| bool "AT91RM9200" |
| |
| config ARCH_AT91SAM9260 |
| bool "AT91SAM9260 or AT91SAM9XE" |
| |
| config ARCH_AT91SAM9261 |
| bool "AT91SAM9261" |
| |
| config ARCH_AT91SAM9263 |
| bool "AT91SAM9263" |
| |
| config ARCH_AT91SAM9RL |
| bool "AT91SAM9RL" |
| |
| endchoice |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91RM9200 |
| |
| comment "AT91RM9200 Board Type" |
| |
| config MACH_ONEARM |
| bool "Ajeco 1ARM Single Board Computer" |
| depends on ARCH_AT91RM9200 |
| help |
| Select this if you are using Ajeco's 1ARM Single Board Computer. |
| <http://www.ajeco.fi/products.htm> |
| |
| config ARCH_AT91RM9200DK |
| bool "Atmel AT91RM9200-DK Development board" |
| depends on ARCH_AT91RM9200 |
| help |
| Select this if you are using Atmel's AT91RM9200-DK Development board. |
| (Discontinued) |
| |
| config MACH_AT91RM9200EK |
| bool "Atmel AT91RM9200-EK Evaluation Kit" |
| depends on ARCH_AT91RM9200 |
| help |
| Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> |
| |
| config MACH_CSB337 |
| bool "Cogent CSB337" |
| depends on ARCH_AT91RM9200 |
| help |
| Select this if you are using Cogent's CSB337 board. |
| <http://www.cogcomp.com/csb_csb337.htm> |
| |
| config MACH_CSB637 |
| bool "Cogent CSB637" |
| depends on ARCH_AT91RM9200 |
| help |
| Select this if you are using Cogent's CSB637 board. |
| <http://www.cogcomp.com/csb_csb637.htm> |
| |
| config MACH_CARMEVA |
| bool "Conitec ARM&EVA" |
| depends on ARCH_AT91RM9200 |
| help |
| Select this if you are using Conitec's AT91RM9200-MCU-Module. |
| <http://www.conitec.net/english/linuxboard.htm> |
| |
| config MACH_ATEB9200 |
| bool "Embest ATEB9200" |
| depends on ARCH_AT91RM9200 |
| help |
| Select this if you are using Embest's ATEB9200 board. |
| <http://www.embedinfo.com/english/product/ATEB9200.asp> |
| |
| config MACH_KB9200 |
| bool "KwikByte KB920x" |
| depends on ARCH_AT91RM9200 |
| help |
| Select this if you are using KwikByte's KB920x board. |
| <http://kwikbyte.com/KB9202_description_new.htm> |
| |
| config MACH_PICOTUX2XX |
| bool "picotux 200" |
| depends on ARCH_AT91RM9200 |
| help |
| Select this if you are using a picotux 200. |
| <http://www.picotux.com/> |
| |
| config MACH_KAFA |
| bool "Sperry-Sun KAFA board" |
| depends on ARCH_AT91RM9200 |
| help |
| Select this if you are using Sperry-Sun's KAFA board. |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9260 |
| |
| comment "AT91SAM9260 Variants" |
| |
| config ARCH_AT91SAM9260_SAM9XE |
| bool "AT91SAM9XE" |
| depends on ARCH_AT91SAM9260 |
| help |
| Select this if you are using Atmel's AT91SAM9XE System-on-Chip. |
| They are basically AT91SAM9260s with various sizes of embedded Flash. |
| |
| comment "AT91SAM9260 / AT91SAM9XE Board Type" |
| |
| config MACH_AT91SAM9260EK |
| bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" |
| depends on ARCH_AT91SAM9260 |
| help |
| Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9261 |
| |
| comment "AT91SAM9261 Board Type" |
| |
| config MACH_AT91SAM9261EK |
| bool "Atmel AT91SAM9261-EK Evaluation Kit" |
| depends on ARCH_AT91SAM9261 |
| help |
| Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9263 |
| |
| comment "AT91SAM9263 Board Type" |
| |
| config MACH_AT91SAM9263EK |
| bool "Atmel AT91SAM9263-EK Evaluation Kit" |
| depends on ARCH_AT91SAM9263 |
| help |
| Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9RL |
| |
| comment "AT91SAM9RL Board Type" |
| |
| config MACH_AT91SAM9RLEK |
| bool "Atmel AT91SAM9RL-EK Evaluation Kit" |
| depends on ARCH_AT91SAM9RL |
| help |
| Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| comment "AT91 Board Options" |
| |
| config MTD_AT91_DATAFLASH_CARD |
| bool "Enable DataFlash Card support" |
| depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK) |
| help |
| Enable support for the DataFlash card. |
| |
| config MTD_NAND_AT91_BUSWIDTH_16 |
| bool "Enable 16-bit data bus interface to NAND flash" |
| depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK) |
| help |
| On AT91SAM926x boards both types of NAND flash can be present |
| (8 and 16 bit data bus width). |
| |
| # ---------------------------------------------------------- |
| |
| comment "AT91 Feature Selections" |
| |
| config AT91_PROGRAMMABLE_CLOCKS |
| bool "Programmable Clocks" |
| help |
| Select this if you need to program one or more of the PCK0..PCK3 |
| programmable clock outputs. |
| |
| endmenu |
| |
| endif |