| /* |
| * Copyright 2006, Segher Boessenkool, IBM Corporation. |
| * Copyright 2006-2007, Michael Ellerman, IBM Corporation. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; version 2 of the |
| * License. |
| * |
| */ |
| |
| #include <linux/irq.h> |
| #include <linux/bootmem.h> |
| #include <linux/msi.h> |
| #include <asm/mpic.h> |
| #include <asm/prom.h> |
| #include <asm/hw_irq.h> |
| #include <asm/ppc-pci.h> |
| #include <asm/msi_bitmap.h> |
| |
| #include "mpic.h" |
| |
| /* A bit ugly, can we get this from the pci_dev somehow? */ |
| static struct mpic *msi_mpic; |
| |
| static void mpic_u3msi_mask_irq(struct irq_data *data) |
| { |
| mask_msi_irq(data); |
| mpic_mask_irq(data); |
| } |
| |
| static void mpic_u3msi_unmask_irq(struct irq_data *data) |
| { |
| mpic_unmask_irq(data); |
| unmask_msi_irq(data); |
| } |
| |
| static struct irq_chip mpic_u3msi_chip = { |
| .irq_shutdown = mpic_u3msi_mask_irq, |
| .irq_mask = mpic_u3msi_mask_irq, |
| .irq_unmask = mpic_u3msi_unmask_irq, |
| .irq_eoi = mpic_end_irq, |
| .irq_set_type = mpic_set_irq_type, |
| .irq_set_affinity = mpic_set_affinity, |
| .name = "MPIC-U3MSI", |
| }; |
| |
| static u64 read_ht_magic_addr(struct pci_dev *pdev, unsigned int pos) |
| { |
| u8 flags; |
| u32 tmp; |
| u64 addr; |
| |
| pci_read_config_byte(pdev, pos + HT_MSI_FLAGS, &flags); |
| |
| if (flags & HT_MSI_FLAGS_FIXED) |
| return HT_MSI_FIXED_ADDR; |
| |
| pci_read_config_dword(pdev, pos + HT_MSI_ADDR_LO, &tmp); |
| addr = tmp & HT_MSI_ADDR_LO_MASK; |
| pci_read_config_dword(pdev, pos + HT_MSI_ADDR_HI, &tmp); |
| addr = addr | ((u64)tmp << 32); |
| |
| return addr; |
| } |
| |
| static u64 find_ht_magic_addr(struct pci_dev *pdev, unsigned int hwirq) |
| { |
| struct pci_bus *bus; |
| unsigned int pos; |
| |
| for (bus = pdev->bus; bus && bus->self; bus = bus->parent) { |
| pos = pci_find_ht_capability(bus->self, HT_CAPTYPE_MSI_MAPPING); |
| if (pos) |
| return read_ht_magic_addr(bus->self, pos); |
| } |
| |
| return 0; |
| } |
| |
| static u64 find_u4_magic_addr(struct pci_dev *pdev, unsigned int hwirq) |
| { |
| struct pci_controller *hose = pci_bus_to_host(pdev->bus); |
| |
| /* U4 PCIe MSIs need to write to the special register in |
| * the bridge that generates interrupts. There should be |
| * theorically a register at 0xf8005000 where you just write |
| * the MSI number and that triggers the right interrupt, but |
| * unfortunately, this is busted in HW, the bridge endian swaps |
| * the value and hits the wrong nibble in the register. |
| * |
| * So instead we use another register set which is used normally |
| * for converting HT interrupts to MPIC interrupts, which decodes |
| * the interrupt number as part of the low address bits |
| * |
| * This will not work if we ever use more than one legacy MSI in |
| * a block but we never do. For one MSI or multiple MSI-X where |
| * each interrupt address can be specified separately, it works |
| * just fine. |
| */ |
| if (of_device_is_compatible(hose->dn, "u4-pcie") || |
| of_device_is_compatible(hose->dn, "U4-pcie")) |
| return 0xf8004000 | (hwirq << 4); |
| |
| return 0; |
| } |
| |
| static int u3msi_msi_check_device(struct pci_dev *pdev, int nvec, int type) |
| { |
| if (type == PCI_CAP_ID_MSIX) |
| pr_debug("u3msi: MSI-X untested, trying anyway.\n"); |
| |
| /* If we can't find a magic address then MSI ain't gonna work */ |
| if (find_ht_magic_addr(pdev, 0) == 0 && |
| find_u4_magic_addr(pdev, 0) == 0) { |
| pr_debug("u3msi: no magic address found for %s\n", |
| pci_name(pdev)); |
| return -ENXIO; |
| } |
| |
| return 0; |
| } |
| |
| static void u3msi_teardown_msi_irqs(struct pci_dev *pdev) |
| { |
| struct msi_desc *entry; |
| |
| list_for_each_entry(entry, &pdev->msi_list, list) { |
| if (entry->irq == NO_IRQ) |
| continue; |
| |
| set_irq_msi(entry->irq, NULL); |
| msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, |
| virq_to_hw(entry->irq), 1); |
| irq_dispose_mapping(entry->irq); |
| } |
| |
| return; |
| } |
| |
| static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) |
| { |
| unsigned int virq; |
| struct msi_desc *entry; |
| struct msi_msg msg; |
| u64 addr; |
| int hwirq; |
| |
| list_for_each_entry(entry, &pdev->msi_list, list) { |
| hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap, 1); |
| if (hwirq < 0) { |
| pr_debug("u3msi: failed allocating hwirq\n"); |
| return hwirq; |
| } |
| |
| addr = find_ht_magic_addr(pdev, hwirq); |
| if (addr == 0) |
| addr = find_u4_magic_addr(pdev, hwirq); |
| msg.address_lo = addr & 0xFFFFFFFF; |
| msg.address_hi = addr >> 32; |
| |
| virq = irq_create_mapping(msi_mpic->irqhost, hwirq); |
| if (virq == NO_IRQ) { |
| pr_debug("u3msi: failed mapping hwirq 0x%x\n", hwirq); |
| msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq, 1); |
| return -ENOSPC; |
| } |
| |
| set_irq_msi(virq, entry); |
| set_irq_chip(virq, &mpic_u3msi_chip); |
| set_irq_type(virq, IRQ_TYPE_EDGE_RISING); |
| |
| pr_debug("u3msi: allocated virq 0x%x (hw 0x%x) addr 0x%lx\n", |
| virq, hwirq, (unsigned long)addr); |
| |
| printk("u3msi: allocated virq 0x%x (hw 0x%x) addr 0x%lx\n", |
| virq, hwirq, (unsigned long)addr); |
| msg.data = hwirq; |
| write_msi_msg(virq, &msg); |
| |
| hwirq++; |
| } |
| |
| return 0; |
| } |
| |
| int mpic_u3msi_init(struct mpic *mpic) |
| { |
| int rc; |
| |
| rc = mpic_msi_init_allocator(mpic); |
| if (rc) { |
| pr_debug("u3msi: Error allocating bitmap!\n"); |
| return rc; |
| } |
| |
| pr_debug("u3msi: Registering MPIC U3 MSI callbacks.\n"); |
| |
| BUG_ON(msi_mpic); |
| msi_mpic = mpic; |
| |
| WARN_ON(ppc_md.setup_msi_irqs); |
| ppc_md.setup_msi_irqs = u3msi_setup_msi_irqs; |
| ppc_md.teardown_msi_irqs = u3msi_teardown_msi_irqs; |
| ppc_md.msi_check_device = u3msi_msi_check_device; |
| |
| return 0; |
| } |