| |
| /* |
| * Copyright 2012 Red Hat |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License version 2. See the file COPYING in the main |
| * directory of this archive for more details. |
| * |
| * Authors: Matthew Garrett |
| * Dave Airlie |
| * |
| * Portions of this code derived from cirrusfb.c: |
| * drivers/video/cirrusfb.c - driver for Cirrus Logic chipsets |
| * |
| * Copyright 1999-2001 Jeff Garzik <jgarzik@pobox.com> |
| */ |
| #include "drmP.h" |
| #include "drm.h" |
| #include "drm_crtc_helper.h" |
| |
| #include <video/cirrus.h> |
| |
| #include "cirrus_drv.h" |
| |
| #define CIRRUS_LUT_SIZE 256 |
| |
| #define PALETTE_INDEX 0x8 |
| #define PALETTE_DATA 0x9 |
| |
| /* |
| * This file contains setup code for the CRTC. |
| */ |
| |
| static void cirrus_crtc_load_lut(struct drm_crtc *crtc) |
| { |
| struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc); |
| struct drm_device *dev = crtc->dev; |
| struct cirrus_device *cdev = dev->dev_private; |
| int i; |
| |
| if (!crtc->enabled) |
| return; |
| |
| for (i = 0; i < CIRRUS_LUT_SIZE; i++) { |
| /* VGA registers */ |
| WREG8(PALETTE_INDEX, i); |
| WREG8(PALETTE_DATA, cirrus_crtc->lut_r[i]); |
| WREG8(PALETTE_DATA, cirrus_crtc->lut_g[i]); |
| WREG8(PALETTE_DATA, cirrus_crtc->lut_b[i]); |
| } |
| } |
| |
| /* |
| * The DRM core requires DPMS functions, but they make little sense in our |
| * case and so are just stubs |
| */ |
| |
| static void cirrus_crtc_dpms(struct drm_crtc *crtc, int mode) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct cirrus_device *cdev = dev->dev_private; |
| u8 sr01, gr0e; |
| |
| switch (mode) { |
| case DRM_MODE_DPMS_ON: |
| sr01 = 0x00; |
| gr0e = 0x00; |
| break; |
| case DRM_MODE_DPMS_STANDBY: |
| sr01 = 0x20; |
| gr0e = 0x02; |
| break; |
| case DRM_MODE_DPMS_SUSPEND: |
| sr01 = 0x20; |
| gr0e = 0x04; |
| break; |
| case DRM_MODE_DPMS_OFF: |
| sr01 = 0x20; |
| gr0e = 0x06; |
| break; |
| default: |
| return; |
| } |
| |
| WREG8(SEQ_INDEX, 0x1); |
| sr01 |= RREG8(SEQ_DATA) & ~0x20; |
| WREG_SEQ(0x1, sr01); |
| |
| WREG8(GFX_INDEX, 0xe); |
| gr0e |= RREG8(GFX_DATA) & ~0x06; |
| WREG_GFX(0xe, gr0e); |
| } |
| |
| /* |
| * The core passes the desired mode to the CRTC code to see whether any |
| * CRTC-specific modifications need to be made to it. We're in a position |
| * to just pass that straight through, so this does nothing |
| */ |
| static bool cirrus_crtc_mode_fixup(struct drm_crtc *crtc, |
| const struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| return true; |
| } |
| |
| void cirrus_set_start_address(struct drm_crtc *crtc, unsigned offset) |
| { |
| struct cirrus_device *cdev = crtc->dev->dev_private; |
| u32 addr; |
| u8 tmp; |
| |
| addr = offset >> 2; |
| WREG_CRT(0x0c, (u8)((addr >> 8) & 0xff)); |
| WREG_CRT(0x0d, (u8)(addr & 0xff)); |
| |
| WREG8(CRT_INDEX, 0x1b); |
| tmp = RREG8(CRT_DATA); |
| tmp &= 0xf2; |
| tmp |= (addr >> 16) & 0x01; |
| tmp |= (addr >> 15) & 0x0c; |
| WREG_CRT(0x1b, tmp); |
| WREG8(CRT_INDEX, 0x1d); |
| tmp = RREG8(CRT_DATA); |
| tmp &= 0x7f; |
| tmp |= (addr >> 12) & 0x80; |
| WREG_CRT(0x1d, tmp); |
| } |
| |
| /* cirrus is different - we will force move buffers out of VRAM */ |
| static int cirrus_crtc_do_set_base(struct drm_crtc *crtc, |
| struct drm_framebuffer *fb, |
| int x, int y, int atomic) |
| { |
| struct cirrus_device *cdev = crtc->dev->dev_private; |
| struct drm_gem_object *obj; |
| struct cirrus_framebuffer *cirrus_fb; |
| struct cirrus_bo *bo; |
| int ret; |
| u64 gpu_addr; |
| |
| /* push the previous fb to system ram */ |
| if (!atomic && fb) { |
| cirrus_fb = to_cirrus_framebuffer(fb); |
| obj = cirrus_fb->obj; |
| bo = gem_to_cirrus_bo(obj); |
| ret = cirrus_bo_reserve(bo, false); |
| if (ret) |
| return ret; |
| cirrus_bo_push_sysram(bo); |
| cirrus_bo_unreserve(bo); |
| } |
| |
| cirrus_fb = to_cirrus_framebuffer(crtc->fb); |
| obj = cirrus_fb->obj; |
| bo = gem_to_cirrus_bo(obj); |
| |
| ret = cirrus_bo_reserve(bo, false); |
| if (ret) |
| return ret; |
| |
| ret = cirrus_bo_pin(bo, TTM_PL_FLAG_VRAM, &gpu_addr); |
| if (ret) { |
| cirrus_bo_unreserve(bo); |
| return ret; |
| } |
| |
| if (&cdev->mode_info.gfbdev->gfb == cirrus_fb) { |
| /* if pushing console in kmap it */ |
| ret = ttm_bo_kmap(&bo->bo, 0, bo->bo.num_pages, &bo->kmap); |
| if (ret) |
| DRM_ERROR("failed to kmap fbcon\n"); |
| } |
| cirrus_bo_unreserve(bo); |
| |
| cirrus_set_start_address(crtc, (u32)gpu_addr); |
| return 0; |
| } |
| |
| static int cirrus_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, |
| struct drm_framebuffer *old_fb) |
| { |
| return cirrus_crtc_do_set_base(crtc, old_fb, x, y, 0); |
| } |
| |
| /* |
| * The meat of this driver. The core passes us a mode and we have to program |
| * it. The modesetting here is the bare minimum required to satisfy the qemu |
| * emulation of this hardware, and running this against a real device is |
| * likely to result in an inadequately programmed mode. We've already had |
| * the opportunity to modify the mode, so whatever we receive here should |
| * be something that can be correctly programmed and displayed |
| */ |
| static int cirrus_crtc_mode_set(struct drm_crtc *crtc, |
| struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode, |
| int x, int y, struct drm_framebuffer *old_fb) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct cirrus_device *cdev = dev->dev_private; |
| int hsyncstart, hsyncend, htotal, hdispend; |
| int vtotal, vdispend; |
| int tmp; |
| int sr07 = 0, hdr = 0; |
| |
| htotal = mode->htotal / 8; |
| hsyncend = mode->hsync_end / 8; |
| hsyncstart = mode->hsync_start / 8; |
| hdispend = mode->hdisplay / 8; |
| |
| vtotal = mode->vtotal; |
| vdispend = mode->vdisplay; |
| |
| vdispend -= 1; |
| vtotal -= 2; |
| |
| htotal -= 5; |
| hdispend -= 1; |
| hsyncstart += 1; |
| hsyncend += 1; |
| |
| WREG_CRT(VGA_CRTC_V_SYNC_END, 0x20); |
| WREG_CRT(VGA_CRTC_H_TOTAL, htotal); |
| WREG_CRT(VGA_CRTC_H_DISP, hdispend); |
| WREG_CRT(VGA_CRTC_H_SYNC_START, hsyncstart); |
| WREG_CRT(VGA_CRTC_H_SYNC_END, hsyncend); |
| WREG_CRT(VGA_CRTC_V_TOTAL, vtotal & 0xff); |
| WREG_CRT(VGA_CRTC_V_DISP_END, vdispend & 0xff); |
| |
| tmp = 0x40; |
| if ((vdispend + 1) & 512) |
| tmp |= 0x20; |
| WREG_CRT(VGA_CRTC_MAX_SCAN, tmp); |
| |
| /* |
| * Overflow bits for values that don't fit in the standard registers |
| */ |
| tmp = 16; |
| if (vtotal & 256) |
| tmp |= 1; |
| if (vdispend & 256) |
| tmp |= 2; |
| if ((vdispend + 1) & 256) |
| tmp |= 8; |
| if (vtotal & 512) |
| tmp |= 32; |
| if (vdispend & 512) |
| tmp |= 64; |
| WREG_CRT(VGA_CRTC_OVERFLOW, tmp); |
| |
| tmp = 0; |
| |
| /* More overflow bits */ |
| |
| if ((htotal + 5) & 64) |
| tmp |= 16; |
| if ((htotal + 5) & 128) |
| tmp |= 32; |
| if (vtotal & 256) |
| tmp |= 64; |
| if (vtotal & 512) |
| tmp |= 128; |
| |
| WREG_CRT(CL_CRT1A, tmp); |
| |
| /* Disable Hercules/CGA compatibility */ |
| WREG_CRT(VGA_CRTC_MODE, 0x03); |
| |
| WREG8(SEQ_INDEX, 0x7); |
| sr07 = RREG8(SEQ_DATA); |
| sr07 &= 0xe0; |
| hdr = 0; |
| switch (crtc->fb->bits_per_pixel) { |
| case 8: |
| sr07 |= 0x11; |
| break; |
| case 16: |
| sr07 |= 0xc1; |
| hdr = 0xc0; |
| break; |
| case 24: |
| sr07 |= 0x15; |
| hdr = 0xc5; |
| break; |
| case 32: |
| sr07 |= 0x19; |
| hdr = 0xc5; |
| break; |
| default: |
| return -1; |
| } |
| |
| WREG_SEQ(0x7, sr07); |
| |
| /* Program the pitch */ |
| tmp = crtc->fb->pitches[0] / 8; |
| WREG_CRT(VGA_CRTC_OFFSET, tmp); |
| |
| /* Enable extended blanking and pitch bits, and enable full memory */ |
| tmp = 0x22; |
| tmp |= (crtc->fb->pitches[0] >> 7) & 0x10; |
| tmp |= (crtc->fb->pitches[0] >> 6) & 0x40; |
| WREG_CRT(0x1b, tmp); |
| |
| /* Enable high-colour modes */ |
| WREG_GFX(VGA_GFX_MODE, 0x40); |
| |
| /* And set graphics mode */ |
| WREG_GFX(VGA_GFX_MISC, 0x01); |
| |
| WREG_HDR(hdr); |
| cirrus_crtc_do_set_base(crtc, old_fb, x, y, 0); |
| return 0; |
| } |
| |
| /* |
| * This is called before a mode is programmed. A typical use might be to |
| * enable DPMS during the programming to avoid seeing intermediate stages, |
| * but that's not relevant to us |
| */ |
| static void cirrus_crtc_prepare(struct drm_crtc *crtc) |
| { |
| } |
| |
| /* |
| * This is called after a mode is programmed. It should reverse anything done |
| * by the prepare function |
| */ |
| static void cirrus_crtc_commit(struct drm_crtc *crtc) |
| { |
| } |
| |
| /* |
| * The core can pass us a set of gamma values to program. We actually only |
| * use this for 8-bit mode so can't perform smooth fades on deeper modes, |
| * but it's a requirement that we provide the function |
| */ |
| static void cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, |
| u16 *blue, uint32_t start, uint32_t size) |
| { |
| struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc); |
| int i; |
| |
| if (size != CIRRUS_LUT_SIZE) |
| return; |
| |
| for (i = 0; i < CIRRUS_LUT_SIZE; i++) { |
| cirrus_crtc->lut_r[i] = red[i]; |
| cirrus_crtc->lut_g[i] = green[i]; |
| cirrus_crtc->lut_b[i] = blue[i]; |
| } |
| cirrus_crtc_load_lut(crtc); |
| } |
| |
| /* Simple cleanup function */ |
| static void cirrus_crtc_destroy(struct drm_crtc *crtc) |
| { |
| struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc); |
| |
| drm_crtc_cleanup(crtc); |
| kfree(cirrus_crtc); |
| } |
| |
| /* These provide the minimum set of functions required to handle a CRTC */ |
| static const struct drm_crtc_funcs cirrus_crtc_funcs = { |
| .gamma_set = cirrus_crtc_gamma_set, |
| .set_config = drm_crtc_helper_set_config, |
| .destroy = cirrus_crtc_destroy, |
| }; |
| |
| static const struct drm_crtc_helper_funcs cirrus_helper_funcs = { |
| .dpms = cirrus_crtc_dpms, |
| .mode_fixup = cirrus_crtc_mode_fixup, |
| .mode_set = cirrus_crtc_mode_set, |
| .mode_set_base = cirrus_crtc_mode_set_base, |
| .prepare = cirrus_crtc_prepare, |
| .commit = cirrus_crtc_commit, |
| .load_lut = cirrus_crtc_load_lut, |
| }; |
| |
| /* CRTC setup */ |
| static void cirrus_crtc_init(struct drm_device *dev) |
| { |
| struct cirrus_device *cdev = dev->dev_private; |
| struct cirrus_crtc *cirrus_crtc; |
| int i; |
| |
| cirrus_crtc = kzalloc(sizeof(struct cirrus_crtc) + |
| (CIRRUSFB_CONN_LIMIT * sizeof(struct drm_connector *)), |
| GFP_KERNEL); |
| |
| if (cirrus_crtc == NULL) |
| return; |
| |
| drm_crtc_init(dev, &cirrus_crtc->base, &cirrus_crtc_funcs); |
| |
| drm_mode_crtc_set_gamma_size(&cirrus_crtc->base, CIRRUS_LUT_SIZE); |
| cdev->mode_info.crtc = cirrus_crtc; |
| |
| for (i = 0; i < CIRRUS_LUT_SIZE; i++) { |
| cirrus_crtc->lut_r[i] = i; |
| cirrus_crtc->lut_g[i] = i; |
| cirrus_crtc->lut_b[i] = i; |
| } |
| |
| drm_crtc_helper_add(&cirrus_crtc->base, &cirrus_helper_funcs); |
| } |
| |
| /** Sets the color ramps on behalf of fbcon */ |
| void cirrus_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green, |
| u16 blue, int regno) |
| { |
| struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc); |
| |
| cirrus_crtc->lut_r[regno] = red; |
| cirrus_crtc->lut_g[regno] = green; |
| cirrus_crtc->lut_b[regno] = blue; |
| } |
| |
| /** Gets the color ramps on behalf of fbcon */ |
| void cirrus_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green, |
| u16 *blue, int regno) |
| { |
| struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc); |
| |
| *red = cirrus_crtc->lut_r[regno]; |
| *green = cirrus_crtc->lut_g[regno]; |
| *blue = cirrus_crtc->lut_b[regno]; |
| } |
| |
| |
| static bool cirrus_encoder_mode_fixup(struct drm_encoder *encoder, |
| const struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| return true; |
| } |
| |
| static void cirrus_encoder_mode_set(struct drm_encoder *encoder, |
| struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| } |
| |
| static void cirrus_encoder_dpms(struct drm_encoder *encoder, int state) |
| { |
| return; |
| } |
| |
| static void cirrus_encoder_prepare(struct drm_encoder *encoder) |
| { |
| } |
| |
| static void cirrus_encoder_commit(struct drm_encoder *encoder) |
| { |
| } |
| |
| void cirrus_encoder_destroy(struct drm_encoder *encoder) |
| { |
| struct cirrus_encoder *cirrus_encoder = to_cirrus_encoder(encoder); |
| drm_encoder_cleanup(encoder); |
| kfree(cirrus_encoder); |
| } |
| |
| static const struct drm_encoder_helper_funcs cirrus_encoder_helper_funcs = { |
| .dpms = cirrus_encoder_dpms, |
| .mode_fixup = cirrus_encoder_mode_fixup, |
| .mode_set = cirrus_encoder_mode_set, |
| .prepare = cirrus_encoder_prepare, |
| .commit = cirrus_encoder_commit, |
| }; |
| |
| static const struct drm_encoder_funcs cirrus_encoder_encoder_funcs = { |
| .destroy = cirrus_encoder_destroy, |
| }; |
| |
| static struct drm_encoder *cirrus_encoder_init(struct drm_device *dev) |
| { |
| struct drm_encoder *encoder; |
| struct cirrus_encoder *cirrus_encoder; |
| |
| cirrus_encoder = kzalloc(sizeof(struct cirrus_encoder), GFP_KERNEL); |
| if (!cirrus_encoder) |
| return NULL; |
| |
| encoder = &cirrus_encoder->base; |
| encoder->possible_crtcs = 0x1; |
| |
| drm_encoder_init(dev, encoder, &cirrus_encoder_encoder_funcs, |
| DRM_MODE_ENCODER_DAC); |
| drm_encoder_helper_add(encoder, &cirrus_encoder_helper_funcs); |
| |
| return encoder; |
| } |
| |
| |
| int cirrus_vga_get_modes(struct drm_connector *connector) |
| { |
| /* Just add a static list of modes */ |
| drm_add_modes_noedid(connector, 640, 480); |
| drm_add_modes_noedid(connector, 800, 600); |
| drm_add_modes_noedid(connector, 1024, 768); |
| drm_add_modes_noedid(connector, 1280, 1024); |
| |
| return 4; |
| } |
| |
| static int cirrus_vga_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| /* Any mode we've added is valid */ |
| return MODE_OK; |
| } |
| |
| struct drm_encoder *cirrus_connector_best_encoder(struct drm_connector |
| *connector) |
| { |
| int enc_id = connector->encoder_ids[0]; |
| struct drm_mode_object *obj; |
| struct drm_encoder *encoder; |
| |
| /* pick the encoder ids */ |
| if (enc_id) { |
| obj = |
| drm_mode_object_find(connector->dev, enc_id, |
| DRM_MODE_OBJECT_ENCODER); |
| if (!obj) |
| return NULL; |
| encoder = obj_to_encoder(obj); |
| return encoder; |
| } |
| return NULL; |
| } |
| |
| static enum drm_connector_status cirrus_vga_detect(struct drm_connector |
| *connector, bool force) |
| { |
| return connector_status_connected; |
| } |
| |
| static void cirrus_connector_destroy(struct drm_connector *connector) |
| { |
| drm_connector_cleanup(connector); |
| kfree(connector); |
| } |
| |
| struct drm_connector_helper_funcs cirrus_vga_connector_helper_funcs = { |
| .get_modes = cirrus_vga_get_modes, |
| .mode_valid = cirrus_vga_mode_valid, |
| .best_encoder = cirrus_connector_best_encoder, |
| }; |
| |
| struct drm_connector_funcs cirrus_vga_connector_funcs = { |
| .dpms = drm_helper_connector_dpms, |
| .detect = cirrus_vga_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = cirrus_connector_destroy, |
| }; |
| |
| static struct drm_connector *cirrus_vga_init(struct drm_device *dev) |
| { |
| struct drm_connector *connector; |
| struct cirrus_connector *cirrus_connector; |
| |
| cirrus_connector = kzalloc(sizeof(struct cirrus_connector), GFP_KERNEL); |
| if (!cirrus_connector) |
| return NULL; |
| |
| connector = &cirrus_connector->base; |
| |
| drm_connector_init(dev, connector, |
| &cirrus_vga_connector_funcs, DRM_MODE_CONNECTOR_VGA); |
| |
| drm_connector_helper_add(connector, &cirrus_vga_connector_helper_funcs); |
| |
| return connector; |
| } |
| |
| |
| int cirrus_modeset_init(struct cirrus_device *cdev) |
| { |
| struct drm_encoder *encoder; |
| struct drm_connector *connector; |
| int ret; |
| |
| drm_mode_config_init(cdev->dev); |
| cdev->mode_info.mode_config_initialized = true; |
| |
| cdev->dev->mode_config.max_width = CIRRUS_MAX_FB_WIDTH; |
| cdev->dev->mode_config.max_height = CIRRUS_MAX_FB_HEIGHT; |
| |
| cdev->dev->mode_config.fb_base = cdev->mc.vram_base; |
| cdev->dev->mode_config.preferred_depth = 24; |
| /* don't prefer a shadow on virt GPU */ |
| cdev->dev->mode_config.prefer_shadow = 0; |
| |
| cirrus_crtc_init(cdev->dev); |
| |
| encoder = cirrus_encoder_init(cdev->dev); |
| if (!encoder) { |
| DRM_ERROR("cirrus_encoder_init failed\n"); |
| return -1; |
| } |
| |
| connector = cirrus_vga_init(cdev->dev); |
| if (!connector) { |
| DRM_ERROR("cirrus_vga_init failed\n"); |
| return -1; |
| } |
| |
| drm_mode_connector_attach_encoder(connector, encoder); |
| |
| ret = cirrus_fbdev_init(cdev); |
| if (ret) { |
| DRM_ERROR("cirrus_fbdev_init failed\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| void cirrus_modeset_fini(struct cirrus_device *cdev) |
| { |
| cirrus_fbdev_fini(cdev); |
| |
| if (cdev->mode_info.mode_config_initialized) { |
| drm_mode_config_cleanup(cdev->dev); |
| cdev->mode_info.mode_config_initialized = false; |
| } |
| } |