| /* |
| * (C) Copyright 2003-2004 |
| * Humboldt Solutions Ltd, adrian@humboldt.co.uk. |
| |
| * This is a combined i2c adapter and algorithm driver for the |
| * MPC107/Tsi107 PowerPC northbridge and processors that include |
| * the same I2C unit (8240, 8245, 85xx). |
| * |
| * Release 0.8 |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <asm/io.h> |
| #ifdef CONFIG_FSL_OCP |
| #include <asm/ocp.h> |
| #define FSL_I2C_DEV_SEPARATE_DFSRR FS_I2C_SEPARATE_DFSRR |
| #define FSL_I2C_DEV_CLOCK_5200 FS_I2C_CLOCK_5200 |
| #else |
| #include <linux/fsl_devices.h> |
| #endif |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| |
| #define MPC_I2C_ADDR 0x00 |
| #define MPC_I2C_FDR 0x04 |
| #define MPC_I2C_CR 0x08 |
| #define MPC_I2C_SR 0x0c |
| #define MPC_I2C_DR 0x10 |
| #define MPC_I2C_DFSRR 0x14 |
| #define MPC_I2C_REGION 0x20 |
| |
| #define CCR_MEN 0x80 |
| #define CCR_MIEN 0x40 |
| #define CCR_MSTA 0x20 |
| #define CCR_MTX 0x10 |
| #define CCR_TXAK 0x08 |
| #define CCR_RSTA 0x04 |
| |
| #define CSR_MCF 0x80 |
| #define CSR_MAAS 0x40 |
| #define CSR_MBB 0x20 |
| #define CSR_MAL 0x10 |
| #define CSR_SRW 0x04 |
| #define CSR_MIF 0x02 |
| #define CSR_RXAK 0x01 |
| |
| struct mpc_i2c { |
| void __iomem *base; |
| u32 interrupt; |
| wait_queue_head_t queue; |
| struct i2c_adapter adap; |
| int irq; |
| u32 flags; |
| }; |
| |
| static __inline__ void writeccr(struct mpc_i2c *i2c, u32 x) |
| { |
| writeb(x, i2c->base + MPC_I2C_CR); |
| } |
| |
| static irqreturn_t mpc_i2c_isr(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct mpc_i2c *i2c = dev_id; |
| if (readb(i2c->base + MPC_I2C_SR) & CSR_MIF) { |
| /* Read again to allow register to stabilise */ |
| i2c->interrupt = readb(i2c->base + MPC_I2C_SR); |
| writeb(0, i2c->base + MPC_I2C_SR); |
| wake_up_interruptible(&i2c->queue); |
| } |
| return IRQ_HANDLED; |
| } |
| |
| static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) |
| { |
| unsigned long orig_jiffies = jiffies; |
| u32 x; |
| int result = 0; |
| |
| if (i2c->irq == 0) |
| { |
| while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) { |
| schedule(); |
| if (time_after(jiffies, orig_jiffies + timeout)) { |
| pr_debug("I2C: timeout\n"); |
| result = -EIO; |
| break; |
| } |
| } |
| x = readb(i2c->base + MPC_I2C_SR); |
| writeb(0, i2c->base + MPC_I2C_SR); |
| } else { |
| /* Interrupt mode */ |
| result = wait_event_interruptible_timeout(i2c->queue, |
| (i2c->interrupt & CSR_MIF), timeout * HZ); |
| |
| if (unlikely(result < 0)) |
| pr_debug("I2C: wait interrupted\n"); |
| else if (unlikely(!(i2c->interrupt & CSR_MIF))) { |
| pr_debug("I2C: wait timeout\n"); |
| result = -ETIMEDOUT; |
| } |
| |
| x = i2c->interrupt; |
| i2c->interrupt = 0; |
| } |
| |
| if (result < 0) |
| return result; |
| |
| if (!(x & CSR_MCF)) { |
| pr_debug("I2C: unfinished\n"); |
| return -EIO; |
| } |
| |
| if (x & CSR_MAL) { |
| pr_debug("I2C: MAL\n"); |
| return -EIO; |
| } |
| |
| if (writing && (x & CSR_RXAK)) { |
| pr_debug("I2C: No RXAK\n"); |
| /* generate stop */ |
| writeccr(i2c, CCR_MEN); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static void mpc_i2c_setclock(struct mpc_i2c *i2c) |
| { |
| /* Set clock and filters */ |
| if (i2c->flags & FSL_I2C_DEV_SEPARATE_DFSRR) { |
| writeb(0x31, i2c->base + MPC_I2C_FDR); |
| writeb(0x10, i2c->base + MPC_I2C_DFSRR); |
| } else if (i2c->flags & FSL_I2C_DEV_CLOCK_5200) |
| writeb(0x3f, i2c->base + MPC_I2C_FDR); |
| else |
| writel(0x1031, i2c->base + MPC_I2C_FDR); |
| } |
| |
| static void mpc_i2c_start(struct mpc_i2c *i2c) |
| { |
| /* Clear arbitration */ |
| writeb(0, i2c->base + MPC_I2C_SR); |
| /* Start with MEN */ |
| writeccr(i2c, CCR_MEN); |
| } |
| |
| static void mpc_i2c_stop(struct mpc_i2c *i2c) |
| { |
| writeccr(i2c, CCR_MEN); |
| } |
| |
| static int mpc_write(struct mpc_i2c *i2c, int target, |
| const u8 * data, int length, int restart) |
| { |
| int i; |
| unsigned timeout = i2c->adap.timeout; |
| u32 flags = restart ? CCR_RSTA : 0; |
| |
| /* Start with MEN */ |
| if (!restart) |
| writeccr(i2c, CCR_MEN); |
| /* Start as master */ |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); |
| /* Write target byte */ |
| writeb((target << 1), i2c->base + MPC_I2C_DR); |
| |
| if (i2c_wait(i2c, timeout, 1) < 0) |
| return -1; |
| |
| for (i = 0; i < length; i++) { |
| /* Write data byte */ |
| writeb(data[i], i2c->base + MPC_I2C_DR); |
| |
| if (i2c_wait(i2c, timeout, 1) < 0) |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int mpc_read(struct mpc_i2c *i2c, int target, |
| u8 * data, int length, int restart) |
| { |
| unsigned timeout = i2c->adap.timeout; |
| int i; |
| u32 flags = restart ? CCR_RSTA : 0; |
| |
| /* Start with MEN */ |
| if (!restart) |
| writeccr(i2c, CCR_MEN); |
| /* Switch to read - restart */ |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); |
| /* Write target address byte - this time with the read flag set */ |
| writeb((target << 1) | 1, i2c->base + MPC_I2C_DR); |
| |
| if (i2c_wait(i2c, timeout, 1) < 0) |
| return -1; |
| |
| if (length) { |
| if (length == 1) |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK); |
| else |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA); |
| /* Dummy read */ |
| readb(i2c->base + MPC_I2C_DR); |
| } |
| |
| for (i = 0; i < length; i++) { |
| if (i2c_wait(i2c, timeout, 0) < 0) |
| return -1; |
| |
| /* Generate txack on next to last byte */ |
| if (i == length - 2) |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK); |
| /* Generate stop on last byte */ |
| if (i == length - 1) |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_TXAK); |
| data[i] = readb(i2c->base + MPC_I2C_DR); |
| } |
| |
| return length; |
| } |
| |
| static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) |
| { |
| struct i2c_msg *pmsg; |
| int i; |
| int ret = 0; |
| unsigned long orig_jiffies = jiffies; |
| struct mpc_i2c *i2c = i2c_get_adapdata(adap); |
| |
| mpc_i2c_start(i2c); |
| |
| /* Allow bus up to 1s to become not busy */ |
| while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) { |
| if (signal_pending(current)) { |
| pr_debug("I2C: Interrupted\n"); |
| return -EINTR; |
| } |
| if (time_after(jiffies, orig_jiffies + HZ)) { |
| pr_debug("I2C: timeout\n"); |
| return -EIO; |
| } |
| schedule(); |
| } |
| |
| for (i = 0; ret >= 0 && i < num; i++) { |
| pmsg = &msgs[i]; |
| pr_debug("Doing %s %d bytes to 0x%02x - %d of %d messages\n", |
| pmsg->flags & I2C_M_RD ? "read" : "write", |
| pmsg->len, pmsg->addr, i + 1, num); |
| if (pmsg->flags & I2C_M_RD) |
| ret = |
| mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i); |
| else |
| ret = |
| mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i); |
| } |
| mpc_i2c_stop(i2c); |
| return (ret < 0) ? ret : num; |
| } |
| |
| static u32 mpc_functionality(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static struct i2c_algorithm mpc_algo = { |
| .name = "MPC algorithm", |
| .id = I2C_ALGO_MPC107, |
| .master_xfer = mpc_xfer, |
| .functionality = mpc_functionality, |
| }; |
| |
| static struct i2c_adapter mpc_ops = { |
| .owner = THIS_MODULE, |
| .name = "MPC adapter", |
| .id = I2C_ALGO_MPC107 | I2C_HW_MPC107, |
| .algo = &mpc_algo, |
| .class = I2C_CLASS_HWMON, |
| .timeout = 1, |
| .retries = 1 |
| }; |
| |
| #ifdef CONFIG_FSL_OCP |
| static int __devinit mpc_i2c_probe(struct ocp_device *ocp) |
| { |
| int result = 0; |
| struct mpc_i2c *i2c; |
| |
| if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) { |
| return -ENOMEM; |
| } |
| memset(i2c, 0, sizeof(*i2c)); |
| |
| i2c->irq = ocp->def->irq; |
| i2c->flags = ((struct ocp_fs_i2c_data *)ocp->def->additions)->flags; |
| init_waitqueue_head(&i2c->queue); |
| |
| if (!request_mem_region(ocp->def->paddr, MPC_I2C_REGION, "i2c-mpc")) { |
| printk(KERN_ERR "i2c-mpc - resource unavailable\n"); |
| return -ENODEV; |
| } |
| |
| i2c->base = ioremap(ocp->def->paddr, MPC_I2C_REGION); |
| |
| if (!i2c->base) { |
| printk(KERN_ERR "i2c-mpc - failed to map controller\n"); |
| result = -ENOMEM; |
| goto fail_map; |
| } |
| |
| if (i2c->irq != OCP_IRQ_NA) |
| { |
| if ((result = request_irq(ocp->def->irq, mpc_i2c_isr, |
| SA_SHIRQ, "i2c-mpc", i2c)) < 0) { |
| printk(KERN_ERR |
| "i2c-mpc - failed to attach interrupt\n"); |
| goto fail_irq; |
| } |
| } else |
| i2c->irq = 0; |
| |
| mpc_i2c_setclock(i2c); |
| ocp_set_drvdata(ocp, i2c); |
| |
| i2c->adap = mpc_ops; |
| i2c_set_adapdata(&i2c->adap, i2c); |
| |
| if ((result = i2c_add_adapter(&i2c->adap)) < 0) { |
| printk(KERN_ERR "i2c-mpc - failed to add adapter\n"); |
| goto fail_add; |
| } |
| |
| return result; |
| |
| fail_add: |
| if (ocp->def->irq != OCP_IRQ_NA) |
| free_irq(ocp->def->irq, 0); |
| fail_irq: |
| iounmap(i2c->base); |
| fail_map: |
| release_mem_region(ocp->def->paddr, MPC_I2C_REGION); |
| kfree(i2c); |
| return result; |
| } |
| static void __devexit mpc_i2c_remove(struct ocp_device *ocp) |
| { |
| struct mpc_i2c *i2c = ocp_get_drvdata(ocp); |
| i2c_del_adapter(&i2c->adap); |
| ocp_set_drvdata(ocp, NULL); |
| |
| if (ocp->def->irq != OCP_IRQ_NA) |
| free_irq(i2c->irq, i2c); |
| iounmap(i2c->base); |
| release_mem_region(ocp->def->paddr, MPC_I2C_REGION); |
| kfree(i2c); |
| } |
| |
| static struct ocp_device_id mpc_iic_ids[] __devinitdata = { |
| {.vendor = OCP_VENDOR_FREESCALE,.function = OCP_FUNC_IIC}, |
| {.vendor = OCP_VENDOR_INVALID} |
| }; |
| |
| MODULE_DEVICE_TABLE(ocp, mpc_iic_ids); |
| |
| static struct ocp_driver mpc_iic_driver = { |
| .name = "iic", |
| .id_table = mpc_iic_ids, |
| .probe = mpc_i2c_probe, |
| .remove = __devexit_p(mpc_i2c_remove) |
| }; |
| |
| static int __init iic_init(void) |
| { |
| return ocp_register_driver(&mpc_iic_driver); |
| } |
| |
| static void __exit iic_exit(void) |
| { |
| ocp_unregister_driver(&mpc_iic_driver); |
| } |
| |
| module_init(iic_init); |
| module_exit(iic_exit); |
| #else |
| static int fsl_i2c_probe(struct device *device) |
| { |
| int result = 0; |
| struct mpc_i2c *i2c; |
| struct platform_device *pdev = to_platform_device(device); |
| struct fsl_i2c_platform_data *pdata; |
| struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| |
| pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data; |
| |
| if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) { |
| return -ENOMEM; |
| } |
| memset(i2c, 0, sizeof(*i2c)); |
| |
| i2c->irq = platform_get_irq(pdev, 0); |
| i2c->flags = pdata->device_flags; |
| init_waitqueue_head(&i2c->queue); |
| |
| i2c->base = ioremap((phys_addr_t)r->start, MPC_I2C_REGION); |
| |
| if (!i2c->base) { |
| printk(KERN_ERR "i2c-mpc - failed to map controller\n"); |
| result = -ENOMEM; |
| goto fail_map; |
| } |
| |
| if (i2c->irq != 0) |
| if ((result = request_irq(i2c->irq, mpc_i2c_isr, |
| SA_SHIRQ, "i2c-mpc", i2c)) < 0) { |
| printk(KERN_ERR |
| "i2c-mpc - failed to attach interrupt\n"); |
| goto fail_irq; |
| } |
| |
| mpc_i2c_setclock(i2c); |
| dev_set_drvdata(device, i2c); |
| |
| i2c->adap = mpc_ops; |
| i2c_set_adapdata(&i2c->adap, i2c); |
| i2c->adap.dev.parent = &pdev->dev; |
| if ((result = i2c_add_adapter(&i2c->adap)) < 0) { |
| printk(KERN_ERR "i2c-mpc - failed to add adapter\n"); |
| goto fail_add; |
| } |
| |
| return result; |
| |
| fail_add: |
| if (i2c->irq != 0) |
| free_irq(i2c->irq, NULL); |
| fail_irq: |
| iounmap(i2c->base); |
| fail_map: |
| kfree(i2c); |
| return result; |
| }; |
| |
| static int fsl_i2c_remove(struct device *device) |
| { |
| struct mpc_i2c *i2c = dev_get_drvdata(device); |
| |
| i2c_del_adapter(&i2c->adap); |
| dev_set_drvdata(device, NULL); |
| |
| if (i2c->irq != 0) |
| free_irq(i2c->irq, i2c); |
| |
| iounmap(i2c->base); |
| kfree(i2c); |
| return 0; |
| }; |
| |
| /* Structure for a device driver */ |
| static struct device_driver fsl_i2c_driver = { |
| .name = "fsl-i2c", |
| .bus = &platform_bus_type, |
| .probe = fsl_i2c_probe, |
| .remove = fsl_i2c_remove, |
| }; |
| |
| static int __init fsl_i2c_init(void) |
| { |
| return driver_register(&fsl_i2c_driver); |
| } |
| |
| static void __exit fsl_i2c_exit(void) |
| { |
| driver_unregister(&fsl_i2c_driver); |
| } |
| |
| module_init(fsl_i2c_init); |
| module_exit(fsl_i2c_exit); |
| |
| #endif /* CONFIG_FSL_OCP */ |
| |
| MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>"); |
| MODULE_DESCRIPTION |
| ("I2C-Bus adapter for MPC107 bridge and MPC824x/85xx/52xx processors"); |
| MODULE_LICENSE("GPL"); |