| /* |
| * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/pwm/pwm.h> |
| |
| / { |
| aliases { |
| can0 = &can2; |
| can1 = &can1; |
| ethernet0 = &fec; |
| lcdif_23bit_pins_a = &pinctrl_disp0_1; |
| lcdif_24bit_pins_a = &pinctrl_disp0_2; |
| pwm0 = &pwm1; |
| pwm1 = &pwm2; |
| reg_can_xcvr = ®_can_xcvr; |
| stk5led = &user_led; |
| usbotg = &usbotg; |
| sdhc0 = &usdhc1; |
| sdhc1 = &usdhc2; |
| }; |
| |
| memory { |
| reg = <0 0>; /* will be filled by U-Boot */ |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mclk: clock@0 { |
| compatible = "fixed-clock"; |
| reg = <0>; |
| #clock-cells = <0>; |
| clock-frequency = <26000000>; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| power { |
| label = "Power Button"; |
| gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; |
| linux,code = <KEY_POWER>; |
| wakeup-source; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| user_led: user { |
| label = "Heartbeat"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_user_led>; |
| gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| |
| reg_3v3_etn: regulator-3v3-etn { |
| compatible = "regulator-fixed"; |
| regulator-name = "3V3_ETN"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_etnphy_power>; |
| gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_2v5: regulator-2v5 { |
| compatible = "regulator-fixed"; |
| regulator-name = "2V5"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| regulator-always-on; |
| }; |
| |
| reg_3v3: regulator-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_can_xcvr: regulator-can-xcvr { |
| compatible = "regulator-fixed"; |
| regulator-name = "CAN XCVR"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan_xcvr>; |
| gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; |
| }; |
| |
| reg_lcd0_pwr: regulator-lcd0-pwr { |
| compatible = "regulator-fixed"; |
| regulator-name = "LCD0 POWER"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lcd0_pwr>; |
| gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-boot-on; |
| }; |
| |
| reg_lcd1_pwr: regulator-lcd1-pwr { |
| compatible = "regulator-fixed"; |
| regulator-name = "LCD1 POWER"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lcd1_pwr>; |
| gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-boot-on; |
| }; |
| |
| reg_usbh1_vbus: regulator-usbh1-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usbh1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbh1_vbus>; |
| gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usbotg_vbus: regulator-usbotg-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usbotg_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg_vbus>; |
| gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| sound { |
| compatible = "karo,imx6qdl-tx6qdl-sgtl5000", |
| "fsl,imx-audio-sgtl5000"; |
| model = "sgtl5000-audio"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux>; |
| ssi-controller = <&ssi1>; |
| audio-codec = <&sgtl5000>; |
| audio-routing = |
| "MIC_IN", "Mic Jack", |
| "Mic Jack", "Mic Bias", |
| "Headphone Jack", "HP_OUT"; |
| mux-int-port = <1>; |
| mux-ext-port = <5>; |
| }; |
| }; |
| |
| &audmux { |
| status = "okay"; |
| }; |
| |
| &can1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| xceiver-supply = <®_can_xcvr>; |
| status = "okay"; |
| }; |
| |
| &can2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| xceiver-supply = <®_can_xcvr>; |
| status = "okay"; |
| }; |
| |
| &ecspi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| cs-gpios = < |
| &gpio2 30 GPIO_ACTIVE_HIGH |
| &gpio3 19 GPIO_ACTIVE_HIGH |
| >; |
| status = "disabled"; |
| |
| spidev0: spi@0 { |
| compatible = "spidev"; |
| reg = <0>; |
| spi-max-frequency = <54000000>; |
| }; |
| |
| spidev1: spi@1 { |
| compatible = "spidev"; |
| reg = <1>; |
| spi-max-frequency = <54000000>; |
| }; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet>; |
| clocks = <&clks IMX6QDL_CLK_ENET>, |
| <&clks IMX6QDL_CLK_ENET>, |
| <&clks IMX6QDL_CLK_ENET_REF>, |
| <&clks IMX6QDL_CLK_ENET_REF>; |
| clock-names = "ipg", "ahb", "ptp", "enet_out"; |
| phy-mode = "rmii"; |
| phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; |
| phy-handle = <&etnphy>; |
| phy-supply = <®_3v3_etn>; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| etnphy: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet_mdio>; |
| interrupts-extended = <&gpio7 1 IRQ_TYPE_EDGE_FALLING>; |
| }; |
| }; |
| }; |
| |
| &gpmi { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpmi_nand>; |
| nand-on-flash-bbt; |
| fsl,no-blockmark-swap; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| ds1339: rtc@68 { |
| compatible = "dallas,ds1339"; |
| reg = <0x68>; |
| }; |
| }; |
| |
| &i2c3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| sgtl5000: sgtl5000@0a { |
| compatible = "fsl,sgtl5000"; |
| reg = <0x0a>; |
| VDDA-supply = <®_2v5>; |
| VDDIO-supply = <®_3v3>; |
| clocks = <&mclk>; |
| }; |
| |
| polytouch: edt-ft5x06@38 { |
| compatible = "edt,edt-ft5x06"; |
| reg = <0x38>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_edt_ft5x06>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <15 IRQ_TYPE_EDGE_FALLING>; |
| reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; |
| wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; |
| wakeup-source; |
| }; |
| |
| touchscreen: tsc2007@48 { |
| compatible = "ti,tsc2007"; |
| reg = <0x48>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_tsc2007>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <26 0>; |
| gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; |
| ti,x-plate-ohms = <660>; |
| wakeup-source; |
| }; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog>; |
| |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ |
| MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ |
| MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */ |
| >; |
| }; |
| |
| pinctrl_audmux: audmuxgrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 /* SSI1_RXD */ |
| MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 /* SSI1_TXD */ |
| MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 /* SSI1_CLK */ |
| MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 /* SSI1_FS */ |
| >; |
| }; |
| |
| pinctrl_disp0_1: disp0grp-1 { |
| fsl,pins = < |
| MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 |
| MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 |
| MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 |
| MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 |
| /* PAD DISP0_DAT0 is used for the Flexcan transceiver control */ |
| MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 |
| MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 |
| MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 |
| MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 |
| MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 |
| MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 |
| MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 |
| MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 |
| MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 |
| MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 |
| MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 |
| MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 |
| MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 |
| MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 |
| MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 |
| MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 |
| MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 |
| MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 |
| MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 |
| MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 |
| MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 |
| MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 |
| MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 |
| >; |
| }; |
| |
| pinctrl_disp0_2: disp0grp-2 { |
| fsl,pins = < |
| MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 |
| MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 |
| MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 |
| MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 |
| MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 |
| MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 |
| MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 |
| MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 |
| MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 |
| MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 |
| MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 |
| MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 |
| MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 |
| MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 |
| MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 |
| MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 |
| MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 |
| MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 |
| MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 |
| MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 |
| MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 |
| MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 |
| MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 |
| MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 |
| MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 |
| MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 |
| MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 |
| MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 |
| >; |
| }; |
| |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x0b0b0 |
| MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x0b0b0 |
| MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x0b0b0 |
| MX6QDL_PAD_GPIO_19__ECSPI1_RDY 0x0b0b0 |
| MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x0b0b0 /* SPI CS0 */ |
| MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x0b0b0 /* SPI CS1 */ |
| >; |
| }; |
| |
| pinctrl_edt_ft5x06: edt-ft5x06grp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* Interrupt */ |
| MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /* Reset */ |
| MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 /* Wake */ |
| >; |
| }; |
| |
| pinctrl_enet: enetgrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 |
| MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 |
| MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 |
| MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 |
| MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 |
| MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 |
| MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_enet_mdio: enet-mdiogrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 |
| MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_etnphy_power: etnphy-pwrgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */ |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 |
| MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 |
| MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_flexcan_xcvr: flexcan-xcvrgrp { |
| fsl,pins = < |
| MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0 /* Flexcan XCVR enable */ |
| >; |
| }; |
| |
| pinctrl_gpmi_nand: gpminandgrp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 |
| MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 |
| MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 |
| MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000 |
| MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 |
| MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 |
| MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 |
| MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 |
| MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 |
| MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 |
| MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 |
| MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 |
| MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 |
| MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 |
| MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 |
| MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 |
| MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_kpp: kppgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1 |
| MX6QDL_PAD_GPIO_4__KEY_COL7 0x1b0b1 |
| MX6QDL_PAD_KEY_COL2__KEY_COL2 0x1b0b1 |
| MX6QDL_PAD_KEY_COL3__KEY_COL3 0x1b0b1 |
| MX6QDL_PAD_GPIO_2__KEY_ROW6 0x1b0b1 |
| MX6QDL_PAD_GPIO_5__KEY_ROW7 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_lcd0_pwr: lcd0-pwrgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 /* LCD Reset */ |
| >; |
| }; |
| |
| pinctrl_lcd1_pwr: lcd-pwrgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b1 /* LCD Power Enable */ |
| >; |
| }; |
| |
| pinctrl_pwm1: pwm1grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_pwm2: pwm2grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_tsc2007: tsc2007grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 /* Interrupt */ |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart1_rtscts: uart1_rtsctsgrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x1b0b1 |
| MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart2_rtscts: uart2_rtsctsgrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart3_rtscts: uart3_rtsctsgrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x1b0b1 |
| MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usbh1_vbus: usbh1-vbusgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 /* USBH1_VBUSEN */ |
| >; |
| }; |
| |
| pinctrl_usbotg: usbotggrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x17059 |
| >; |
| }; |
| |
| pinctrl_usbotg_vbus: usbotg-vbusgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* USBOTG_VBUSEN */ |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_CMD__SD1_CMD 0x070b1 |
| MX6QDL_PAD_SD1_CLK__SD1_CLK 0x070b1 |
| MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x070b1 |
| MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x070b1 |
| MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x070b1 |
| MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x070b1 |
| MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */ |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_CMD__SD2_CMD 0x070b1 |
| MX6QDL_PAD_SD2_CLK__SD2_CLK 0x070b1 |
| MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x070b1 |
| MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x070b1 |
| MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x070b1 |
| MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x070b1 |
| MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x170b0 /* SD2 CD */ |
| >; |
| }; |
| |
| pinctrl_user_led: user-ledgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */ |
| >; |
| }; |
| }; |
| |
| &kpp { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_kpp>; |
| /* sample keymap */ |
| /* row/col 0,1 are mapped to KPP row/col 6,7 */ |
| linux,keymap = < |
| MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */ |
| MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */ |
| MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */ |
| MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */ |
| MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */ |
| MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */ |
| MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */ |
| MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */ |
| MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */ |
| MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */ |
| MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */ |
| >; |
| status = "okay"; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm1>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| &pwm2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm2>; |
| #pwm-cells = <3>; |
| status = "okay"; |
| }; |
| |
| &ssi1 { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &usbh1 { |
| vbus-supply = <®_usbh1_vbus>; |
| dr_mode = "host"; |
| disable-over-current; |
| status = "okay"; |
| }; |
| |
| &usbotg { |
| vbus-supply = <®_usbotg_vbus>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg>; |
| dr_mode = "peripheral"; |
| disable-over-current; |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| bus-width = <4>; |
| no-1-8-v; |
| cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; |
| fsl,wp-controller; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| bus-width = <4>; |
| no-1-8-v; |
| cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; |
| fsl,wp-controller; |
| status = "okay"; |
| }; |