| /* |
| * SAMSUNG EXYNOS5420 SoC device tree source |
| * |
| * Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file. |
| * EXYNOS5420 based board files can include this file and provide |
| * values for board specfic bindings. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include "exynos54xx.dtsi" |
| #include <dt-bindings/clock/exynos5420.h> |
| #include <dt-bindings/clock/exynos-audss-clk.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| compatible = "samsung,exynos5420", "samsung,exynos5"; |
| |
| aliases { |
| mshc0 = &mmc_0; |
| mshc1 = &mmc_1; |
| mshc2 = &mmc_2; |
| pinctrl0 = &pinctrl_0; |
| pinctrl1 = &pinctrl_1; |
| pinctrl2 = &pinctrl_2; |
| pinctrl3 = &pinctrl_3; |
| pinctrl4 = &pinctrl_4; |
| i2c8 = &hsi2c_8; |
| i2c9 = &hsi2c_9; |
| i2c10 = &hsi2c_10; |
| gsc0 = &gsc_0; |
| gsc1 = &gsc_1; |
| spi0 = &spi_0; |
| spi1 = &spi_1; |
| spi2 = &spi_2; |
| }; |
| |
| /* |
| * The 'cpus' node is not present here but instead it is provided |
| * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi. |
| */ |
| |
| soc: soc { |
| cluster_a15_opp_table: opp_table0 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| opp-1800000000 { |
| opp-hz = /bits/ 64 <1800000000>; |
| opp-microvolt = <1250000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1700000000 { |
| opp-hz = /bits/ 64 <1700000000>; |
| opp-microvolt = <1212500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1600000000 { |
| opp-hz = /bits/ 64 <1600000000>; |
| opp-microvolt = <1175000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1500000000 { |
| opp-hz = /bits/ 64 <1500000000>; |
| opp-microvolt = <1137500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1400000000 { |
| opp-hz = /bits/ 64 <1400000000>; |
| opp-microvolt = <1112500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1300000000 { |
| opp-hz = /bits/ 64 <1300000000>; |
| opp-microvolt = <1062500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1200000000 { |
| opp-hz = /bits/ 64 <1200000000>; |
| opp-microvolt = <1037500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1100000000 { |
| opp-hz = /bits/ 64 <1100000000>; |
| opp-microvolt = <1012500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1000000000 { |
| opp-hz = /bits/ 64 <1000000000>; |
| opp-microvolt = < 987500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-900000000 { |
| opp-hz = /bits/ 64 <900000000>; |
| opp-microvolt = < 962500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-800000000 { |
| opp-hz = /bits/ 64 <800000000>; |
| opp-microvolt = < 937500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-700000000 { |
| opp-hz = /bits/ 64 <700000000>; |
| opp-microvolt = < 912500>; |
| clock-latency-ns = <140000>; |
| }; |
| }; |
| |
| cluster_a7_opp_table: opp_table1 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| opp-1300000000 { |
| opp-hz = /bits/ 64 <1300000000>; |
| opp-microvolt = <1275000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1200000000 { |
| opp-hz = /bits/ 64 <1200000000>; |
| opp-microvolt = <1212500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1100000000 { |
| opp-hz = /bits/ 64 <1100000000>; |
| opp-microvolt = <1162500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1000000000 { |
| opp-hz = /bits/ 64 <1000000000>; |
| opp-microvolt = <1112500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-900000000 { |
| opp-hz = /bits/ 64 <900000000>; |
| opp-microvolt = <1062500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-800000000 { |
| opp-hz = /bits/ 64 <800000000>; |
| opp-microvolt = <1025000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-700000000 { |
| opp-hz = /bits/ 64 <700000000>; |
| opp-microvolt = <975000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-600000000 { |
| opp-hz = /bits/ 64 <600000000>; |
| opp-microvolt = <937500>; |
| clock-latency-ns = <140000>; |
| }; |
| }; |
| |
| cci: cci@10d20000 { |
| compatible = "arm,cci-400"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x10d20000 0x1000>; |
| ranges = <0x0 0x10d20000 0x6000>; |
| |
| cci_control0: slave-if@4000 { |
| compatible = "arm,cci-400-ctrl-if"; |
| interface-type = "ace"; |
| reg = <0x4000 0x1000>; |
| }; |
| cci_control1: slave-if@5000 { |
| compatible = "arm,cci-400-ctrl-if"; |
| interface-type = "ace"; |
| reg = <0x5000 0x1000>; |
| }; |
| }; |
| |
| clock: clock-controller@10010000 { |
| compatible = "samsung,exynos5420-clock"; |
| reg = <0x10010000 0x30000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_audss: audss-clock-controller@3810000 { |
| compatible = "samsung,exynos5420-audss-clock"; |
| reg = <0x03810000 0x0C>; |
| #clock-cells = <1>; |
| clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>, |
| <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>; |
| clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; |
| }; |
| |
| mfc: codec@11000000 { |
| compatible = "samsung,mfc-v7"; |
| reg = <0x11000000 0x10000>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_MFC>; |
| clock-names = "mfc"; |
| power-domains = <&mfc_pd>; |
| iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; |
| iommu-names = "left", "right"; |
| }; |
| |
| mmc_0: mmc@12200000 { |
| compatible = "samsung,exynos5420-dw-mshc-smu"; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x12200000 0x2000>; |
| clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x40>; |
| status = "disabled"; |
| }; |
| |
| mmc_1: mmc@12210000 { |
| compatible = "samsung,exynos5420-dw-mshc-smu"; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x12210000 0x2000>; |
| clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x40>; |
| status = "disabled"; |
| }; |
| |
| mmc_2: mmc@12220000 { |
| compatible = "samsung,exynos5420-dw-mshc"; |
| interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x12220000 0x1000>; |
| clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x40>; |
| status = "disabled"; |
| }; |
| |
| nocp_mem0_0: nocp@10CA1000 { |
| compatible = "samsung,exynos5420-nocp"; |
| reg = <0x10CA1000 0x200>; |
| status = "disabled"; |
| }; |
| |
| nocp_mem0_1: nocp@10CA1400 { |
| compatible = "samsung,exynos5420-nocp"; |
| reg = <0x10CA1400 0x200>; |
| status = "disabled"; |
| }; |
| |
| nocp_mem1_0: nocp@10CA1800 { |
| compatible = "samsung,exynos5420-nocp"; |
| reg = <0x10CA1800 0x200>; |
| status = "disabled"; |
| }; |
| |
| nocp_mem1_1: nocp@10CA1C00 { |
| compatible = "samsung,exynos5420-nocp"; |
| reg = <0x10CA1C00 0x200>; |
| status = "disabled"; |
| }; |
| |
| nocp_g3d_0: nocp@11A51000 { |
| compatible = "samsung,exynos5420-nocp"; |
| reg = <0x11A51000 0x200>; |
| status = "disabled"; |
| }; |
| |
| nocp_g3d_1: nocp@11A51400 { |
| compatible = "samsung,exynos5420-nocp"; |
| reg = <0x11A51400 0x200>; |
| status = "disabled"; |
| }; |
| |
| gsc_pd: power-domain@10044000 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10044000 0x20>; |
| #power-domain-cells = <0>; |
| label = "GSC"; |
| clocks = <&clock CLK_FIN_PLL>, |
| <&clock CLK_MOUT_USER_ACLK300_GSCL>, |
| <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; |
| clock-names = "oscclk", "clk0", "asb0", "asb1"; |
| }; |
| |
| isp_pd: power-domain@10044020 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10044020 0x20>; |
| #power-domain-cells = <0>; |
| label = "ISP"; |
| }; |
| |
| mfc_pd: power-domain@10044060 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10044060 0x20>; |
| clocks = <&clock CLK_FIN_PLL>, |
| <&clock CLK_MOUT_USER_ACLK333>, |
| <&clock CLK_ACLK333>; |
| clock-names = "oscclk", "clk0","asb0"; |
| #power-domain-cells = <0>; |
| label = "MFC"; |
| }; |
| |
| msc_pd: power-domain@10044120 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10044120 0x20>; |
| #power-domain-cells = <0>; |
| label = "MSC"; |
| }; |
| |
| disp_pd: power-domain@100440C0 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x100440C0 0x20>; |
| #power-domain-cells = <0>; |
| label = "DISP"; |
| clocks = <&clock CLK_FIN_PLL>, |
| <&clock CLK_MOUT_USER_ACLK200_DISP1>, |
| <&clock CLK_MOUT_USER_ACLK300_DISP1>, |
| <&clock CLK_MOUT_USER_ACLK400_DISP1>, |
| <&clock CLK_FIMD1>, <&clock CLK_MIXER>; |
| clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1"; |
| }; |
| |
| pinctrl_0: pinctrl@13400000 { |
| compatible = "samsung,exynos5420-pinctrl"; |
| reg = <0x13400000 0x1000>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| |
| wakeup-interrupt-controller { |
| compatible = "samsung,exynos4210-wakeup-eint"; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| pinctrl_1: pinctrl@13410000 { |
| compatible = "samsung,exynos5420-pinctrl"; |
| reg = <0x13410000 0x1000>; |
| interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_2: pinctrl@14000000 { |
| compatible = "samsung,exynos5420-pinctrl"; |
| reg = <0x14000000 0x1000>; |
| interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_3: pinctrl@14010000 { |
| compatible = "samsung,exynos5420-pinctrl"; |
| reg = <0x14010000 0x1000>; |
| interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_4: pinctrl@03860000 { |
| compatible = "samsung,exynos5420-pinctrl"; |
| reg = <0x03860000 0x1000>; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| amba { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| adma: adma@03880000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x03880000 0x1000>; |
| interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_audss EXYNOS_ADMA>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <6>; |
| #dma-requests = <16>; |
| }; |
| |
| pdma0: pdma@121A0000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x121A0000 0x1000>; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_PDMA0>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| }; |
| |
| pdma1: pdma@121B0000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x121B0000 0x1000>; |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_PDMA1>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| }; |
| |
| mdma0: mdma@10800000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x10800000 0x1000>; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_MDMA0>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <1>; |
| }; |
| |
| mdma1: mdma@11C10000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x11C10000 0x1000>; |
| interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_MDMA1>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <1>; |
| /* |
| * MDMA1 can support both secure and non-secure |
| * AXI transactions. When this is enabled in |
| * the kernel for boards that run in secure |
| * mode, we are getting imprecise external |
| * aborts causing the kernel to oops. |
| */ |
| status = "disabled"; |
| }; |
| }; |
| |
| i2s0: i2s@03830000 { |
| compatible = "samsung,exynos5420-i2s"; |
| reg = <0x03830000 0x100>; |
| dmas = <&adma 0 |
| &adma 2 |
| &adma 1>; |
| dma-names = "tx", "rx", "tx-sec"; |
| clocks = <&clock_audss EXYNOS_I2S_BUS>, |
| <&clock_audss EXYNOS_I2S_BUS>, |
| <&clock_audss EXYNOS_SCLK_I2S>; |
| clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; |
| #clock-cells = <1>; |
| clock-output-names = "i2s_cdclk0"; |
| #sound-dai-cells = <1>; |
| samsung,idma-addr = <0x03000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s0_bus>; |
| status = "disabled"; |
| }; |
| |
| i2s1: i2s@12D60000 { |
| compatible = "samsung,exynos5420-i2s"; |
| reg = <0x12D60000 0x100>; |
| dmas = <&pdma1 12 |
| &pdma1 11>; |
| dma-names = "tx", "rx"; |
| clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>; |
| clock-names = "iis", "i2s_opclk0"; |
| #clock-cells = <1>; |
| clock-output-names = "i2s_cdclk1"; |
| #sound-dai-cells = <1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s1_bus>; |
| status = "disabled"; |
| }; |
| |
| i2s2: i2s@12D70000 { |
| compatible = "samsung,exynos5420-i2s"; |
| reg = <0x12D70000 0x100>; |
| dmas = <&pdma0 12 |
| &pdma0 11>; |
| dma-names = "tx", "rx"; |
| clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>; |
| clock-names = "iis", "i2s_opclk0"; |
| #clock-cells = <1>; |
| clock-output-names = "i2s_cdclk2"; |
| #sound-dai-cells = <1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s2_bus>; |
| status = "disabled"; |
| }; |
| |
| spi_0: spi@12d20000 { |
| compatible = "samsung,exynos4210-spi"; |
| reg = <0x12d20000 0x100>; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&pdma0 5 |
| &pdma0 4>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_bus>; |
| clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; |
| clock-names = "spi", "spi_busclk0"; |
| status = "disabled"; |
| }; |
| |
| spi_1: spi@12d30000 { |
| compatible = "samsung,exynos4210-spi"; |
| reg = <0x12d30000 0x100>; |
| interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&pdma1 5 |
| &pdma1 4>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi1_bus>; |
| clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; |
| clock-names = "spi", "spi_busclk0"; |
| status = "disabled"; |
| }; |
| |
| spi_2: spi@12d40000 { |
| compatible = "samsung,exynos4210-spi"; |
| reg = <0x12d40000 0x100>; |
| interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&pdma0 7 |
| &pdma0 6>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi2_bus>; |
| clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; |
| clock-names = "spi", "spi_busclk0"; |
| status = "disabled"; |
| }; |
| |
| dp_phy: dp-video-phy { |
| compatible = "samsung,exynos5420-dp-video-phy"; |
| samsung,pmu-syscon = <&pmu_system_controller>; |
| #phy-cells = <0>; |
| }; |
| |
| mipi_phy: mipi-video-phy { |
| compatible = "samsung,exynos5420-mipi-video-phy"; |
| syscon = <&pmu_system_controller>; |
| #phy-cells = <1>; |
| }; |
| |
| dsi@14500000 { |
| compatible = "samsung,exynos5410-mipi-dsi"; |
| reg = <0x14500000 0x10000>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&mipi_phy 1>; |
| phy-names = "dsim"; |
| clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>; |
| clock-names = "bus_clk", "pll_clk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| adc: adc@12D10000 { |
| compatible = "samsung,exynos-adc-v2"; |
| reg = <0x12D10000 0x100>; |
| interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_TSADC>; |
| clock-names = "adc"; |
| #io-channel-cells = <1>; |
| io-channel-ranges; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| status = "disabled"; |
| }; |
| |
| hsi2c_8: i2c@12E00000 { |
| compatible = "samsung,exynos5250-hsi2c"; |
| reg = <0x12E00000 0x1000>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c8_hs_bus>; |
| clocks = <&clock CLK_USI4>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_9: i2c@12E10000 { |
| compatible = "samsung,exynos5250-hsi2c"; |
| reg = <0x12E10000 0x1000>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c9_hs_bus>; |
| clocks = <&clock CLK_USI5>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_10: i2c@12E20000 { |
| compatible = "samsung,exynos5250-hsi2c"; |
| reg = <0x12E20000 0x1000>; |
| interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c10_hs_bus>; |
| clocks = <&clock CLK_USI6>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hdmi: hdmi@14530000 { |
| compatible = "samsung,exynos5420-hdmi"; |
| reg = <0x14530000 0x70000>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, |
| <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, |
| <&clock CLK_MOUT_HDMI>; |
| clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", |
| "sclk_hdmiphy", "mout_hdmi"; |
| phy = <&hdmiphy>; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| status = "disabled"; |
| power-domains = <&disp_pd>; |
| }; |
| |
| hdmiphy: hdmiphy@145D0000 { |
| reg = <0x145D0000 0x20>; |
| }; |
| |
| hdmicec: cec@101B0000 { |
| compatible = "samsung,s5p-cec"; |
| reg = <0x101B0000 0x200>; |
| interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_HDMI_CEC>; |
| clock-names = "hdmicec"; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| hdmi-phandle = <&hdmi>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hdmi_cec>; |
| status = "disabled"; |
| }; |
| |
| mixer: mixer@14450000 { |
| compatible = "samsung,exynos5420-mixer"; |
| reg = <0x14450000 0x10000>; |
| interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, |
| <&clock CLK_SCLK_HDMI>; |
| clock-names = "mixer", "hdmi", "sclk_hdmi"; |
| power-domains = <&disp_pd>; |
| iommus = <&sysmmu_tv>; |
| }; |
| |
| rotator: rotator@11C00000 { |
| compatible = "samsung,exynos5250-rotator"; |
| reg = <0x11C00000 0x64>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_ROTATOR>; |
| clock-names = "rotator"; |
| iommus = <&sysmmu_rotator>; |
| }; |
| |
| gsc_0: video-scaler@13e00000 { |
| compatible = "samsung,exynos5-gsc"; |
| reg = <0x13e00000 0x1000>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_GSCL0>; |
| clock-names = "gscl"; |
| power-domains = <&gsc_pd>; |
| iommus = <&sysmmu_gscl0>; |
| }; |
| |
| gsc_1: video-scaler@13e10000 { |
| compatible = "samsung,exynos5-gsc"; |
| reg = <0x13e10000 0x1000>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_GSCL1>; |
| clock-names = "gscl"; |
| power-domains = <&gsc_pd>; |
| iommus = <&sysmmu_gscl1>; |
| }; |
| |
| jpeg_0: jpeg@11F50000 { |
| compatible = "samsung,exynos5420-jpeg"; |
| reg = <0x11F50000 0x1000>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "jpeg"; |
| clocks = <&clock CLK_JPEG>; |
| iommus = <&sysmmu_jpeg0>; |
| }; |
| |
| jpeg_1: jpeg@11F60000 { |
| compatible = "samsung,exynos5420-jpeg"; |
| reg = <0x11F60000 0x1000>; |
| interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "jpeg"; |
| clocks = <&clock CLK_JPEG2>; |
| iommus = <&sysmmu_jpeg1>; |
| }; |
| |
| pmu_system_controller: system-controller@10040000 { |
| compatible = "samsung,exynos5420-pmu", "syscon"; |
| reg = <0x10040000 0x5000>; |
| clock-names = "clkout16"; |
| clocks = <&clock CLK_FIN_PLL>; |
| #clock-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupt-parent = <&gic>; |
| }; |
| |
| tmu_cpu0: tmu@10060000 { |
| compatible = "samsung,exynos5420-tmu"; |
| reg = <0x10060000 0x100>; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_TMU>; |
| clock-names = "tmu_apbif"; |
| #include "exynos5420-tmu-sensor-conf.dtsi" |
| }; |
| |
| tmu_cpu1: tmu@10064000 { |
| compatible = "samsung,exynos5420-tmu"; |
| reg = <0x10064000 0x100>; |
| interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_TMU>; |
| clock-names = "tmu_apbif"; |
| #include "exynos5420-tmu-sensor-conf.dtsi" |
| }; |
| |
| tmu_cpu2: tmu@10068000 { |
| compatible = "samsung,exynos5420-tmu-ext-triminfo"; |
| reg = <0x10068000 0x100>, <0x1006c000 0x4>; |
| interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; |
| clock-names = "tmu_apbif", "tmu_triminfo_apbif"; |
| #include "exynos5420-tmu-sensor-conf.dtsi" |
| }; |
| |
| tmu_cpu3: tmu@1006c000 { |
| compatible = "samsung,exynos5420-tmu-ext-triminfo"; |
| reg = <0x1006c000 0x100>, <0x100a0000 0x4>; |
| interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; |
| clock-names = "tmu_apbif", "tmu_triminfo_apbif"; |
| #include "exynos5420-tmu-sensor-conf.dtsi" |
| }; |
| |
| tmu_gpu: tmu@100a0000 { |
| compatible = "samsung,exynos5420-tmu-ext-triminfo"; |
| reg = <0x100a0000 0x100>, <0x10068000 0x4>; |
| interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; |
| clock-names = "tmu_apbif", "tmu_triminfo_apbif"; |
| #include "exynos5420-tmu-sensor-conf.dtsi" |
| }; |
| |
| sysmmu_g2dr: sysmmu@0x10A60000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x10A60000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <24 5>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_g2dw: sysmmu@0x10A70000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x10A70000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <22 2>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_tv: sysmmu@0x14650000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x14650000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <7 4>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>; |
| power-domains = <&disp_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_gscl0: sysmmu@0x13E80000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x13E80000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <2 0>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; |
| power-domains = <&gsc_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_gscl1: sysmmu@0x13E90000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x13E90000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <2 2>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; |
| power-domains = <&gsc_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_scaler0r: sysmmu@0x12880000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x12880000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <22 4>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_scaler1r: sysmmu@0x12890000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x12890000 0x1000>; |
| interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_scaler2r: sysmmu@0x128A0000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x128A0000 0x1000>; |
| interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_scaler0w: sysmmu@0x128C0000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x128C0000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <27 2>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_scaler1w: sysmmu@0x128D0000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x128D0000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <22 6>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_scaler2w: sysmmu@0x128E0000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x128E0000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <19 6>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_rotator: sysmmu@0x11D40000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x11D40000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <4 0>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_jpeg0: sysmmu@0x11F10000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x11F10000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <4 2>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_jpeg1: sysmmu@0x11F20000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x11F20000 0x1000>; |
| interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_mfc_l: sysmmu@0x11200000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x11200000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <6 2>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; |
| power-domains = <&mfc_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_mfc_r: sysmmu@0x11210000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x11210000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <8 5>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; |
| power-domains = <&mfc_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimd1_0: sysmmu@0x14640000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x14640000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <3 2>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>; |
| power-domains = <&disp_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimd1_1: sysmmu@0x14680000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x14680000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <3 0>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>; |
| power-domains = <&disp_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| bus_wcore: bus_wcore { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK400_WCORE>; |
| clock-names = "bus"; |
| operating-points-v2 = <&bus_wcore_opp_table>; |
| status = "disabled"; |
| }; |
| |
| bus_noc: bus_noc { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK100_NOC>; |
| clock-names = "bus"; |
| operating-points-v2 = <&bus_noc_opp_table>; |
| status = "disabled"; |
| }; |
| |
| bus_fsys_apb: bus_fsys_apb { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_PCLK200_FSYS>; |
| clock-names = "bus"; |
| operating-points-v2 = <&bus_fsys_apb_opp_table>; |
| status = "disabled"; |
| }; |
| |
| bus_fsys: bus_fsys { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK200_FSYS>; |
| clock-names = "bus"; |
| operating-points-v2 = <&bus_fsys_apb_opp_table>; |
| status = "disabled"; |
| }; |
| |
| bus_fsys2: bus_fsys2 { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK200_FSYS2>; |
| clock-names = "bus"; |
| operating-points-v2 = <&bus_fsys2_opp_table>; |
| status = "disabled"; |
| }; |
| |
| bus_mfc: bus_mfc { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK333>; |
| clock-names = "bus"; |
| operating-points-v2 = <&bus_mfc_opp_table>; |
| status = "disabled"; |
| }; |
| |
| bus_gen: bus_gen { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK266>; |
| clock-names = "bus"; |
| operating-points-v2 = <&bus_gen_opp_table>; |
| status = "disabled"; |
| }; |
| |
| bus_peri: bus_peri { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK66>; |
| clock-names = "bus"; |
| operating-points-v2 = <&bus_peri_opp_table>; |
| status = "disabled"; |
| }; |
| |
| bus_g2d: bus_g2d { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK333_G2D>; |
| clock-names = "bus"; |
| operating-points-v2 = <&bus_g2d_opp_table>; |
| status = "disabled"; |
| }; |
| |
| bus_g2d_acp: bus_g2d_acp { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK266_G2D>; |
| clock-names = "bus"; |
| operating-points-v2 = <&bus_g2d_acp_opp_table>; |
| status = "disabled"; |
| }; |
| |
| bus_jpeg: bus_jpeg { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK300_JPEG>; |
| clock-names = "bus"; |
| operating-points-v2 = <&bus_jpeg_opp_table>; |
| status = "disabled"; |
| }; |
| |
| bus_jpeg_apb: bus_jpeg_apb { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK166>; |
| clock-names = "bus"; |
| operating-points-v2 = <&bus_jpeg_apb_opp_table>; |
| status = "disabled"; |
| }; |
| |
| bus_disp1_fimd: bus_disp1_fimd { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK300_DISP1>; |
| clock-names = "bus"; |
| operating-points-v2 = <&bus_disp1_fimd_opp_table>; |
| status = "disabled"; |
| }; |
| |
| bus_disp1: bus_disp1 { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK400_DISP1>; |
| clock-names = "bus"; |
| operating-points-v2 = <&bus_disp1_opp_table>; |
| status = "disabled"; |
| }; |
| |
| bus_gscl_scaler: bus_gscl_scaler { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK300_GSCL>; |
| clock-names = "bus"; |
| operating-points-v2 = <&bus_gscl_opp_table>; |
| status = "disabled"; |
| }; |
| |
| bus_mscl: bus_mscl { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK400_MSCL>; |
| clock-names = "bus"; |
| operating-points-v2 = <&bus_mscl_opp_table>; |
| status = "disabled"; |
| }; |
| |
| bus_wcore_opp_table: opp_table2 { |
| compatible = "operating-points-v2"; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <84000000>; |
| opp-microvolt = <925000>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <111000000>; |
| opp-microvolt = <950000>; |
| }; |
| opp02 { |
| opp-hz = /bits/ 64 <222000000>; |
| opp-microvolt = <950000>; |
| }; |
| opp03 { |
| opp-hz = /bits/ 64 <333000000>; |
| opp-microvolt = <950000>; |
| }; |
| opp04 { |
| opp-hz = /bits/ 64 <400000000>; |
| opp-microvolt = <987500>; |
| }; |
| }; |
| |
| bus_noc_opp_table: opp_table3 { |
| compatible = "operating-points-v2"; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <67000000>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <75000000>; |
| }; |
| opp02 { |
| opp-hz = /bits/ 64 <86000000>; |
| }; |
| opp03 { |
| opp-hz = /bits/ 64 <100000000>; |
| }; |
| }; |
| |
| bus_fsys_apb_opp_table: opp_table4 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <100000000>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <200000000>; |
| }; |
| }; |
| |
| bus_fsys2_opp_table: opp_table5 { |
| compatible = "operating-points-v2"; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <75000000>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <100000000>; |
| }; |
| opp02 { |
| opp-hz = /bits/ 64 <150000000>; |
| }; |
| }; |
| |
| bus_mfc_opp_table: opp_table6 { |
| compatible = "operating-points-v2"; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <96000000>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <111000000>; |
| }; |
| opp02 { |
| opp-hz = /bits/ 64 <167000000>; |
| }; |
| opp03 { |
| opp-hz = /bits/ 64 <222000000>; |
| }; |
| opp04 { |
| opp-hz = /bits/ 64 <333000000>; |
| }; |
| }; |
| |
| bus_gen_opp_table: opp_table7 { |
| compatible = "operating-points-v2"; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <89000000>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <133000000>; |
| }; |
| opp02 { |
| opp-hz = /bits/ 64 <178000000>; |
| }; |
| opp03 { |
| opp-hz = /bits/ 64 <267000000>; |
| }; |
| }; |
| |
| bus_peri_opp_table: opp_table8 { |
| compatible = "operating-points-v2"; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <67000000>; |
| }; |
| }; |
| |
| bus_g2d_opp_table: opp_table9 { |
| compatible = "operating-points-v2"; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <84000000>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <167000000>; |
| }; |
| opp02 { |
| opp-hz = /bits/ 64 <222000000>; |
| }; |
| opp03 { |
| opp-hz = /bits/ 64 <300000000>; |
| }; |
| opp04 { |
| opp-hz = /bits/ 64 <333000000>; |
| }; |
| }; |
| |
| bus_g2d_acp_opp_table: opp_table10 { |
| compatible = "operating-points-v2"; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <67000000>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <133000000>; |
| }; |
| opp02 { |
| opp-hz = /bits/ 64 <178000000>; |
| }; |
| opp03 { |
| opp-hz = /bits/ 64 <267000000>; |
| }; |
| }; |
| |
| bus_jpeg_opp_table: opp_table11 { |
| compatible = "operating-points-v2"; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <75000000>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <150000000>; |
| }; |
| opp02 { |
| opp-hz = /bits/ 64 <200000000>; |
| }; |
| opp03 { |
| opp-hz = /bits/ 64 <300000000>; |
| }; |
| }; |
| |
| bus_jpeg_apb_opp_table: opp_table12 { |
| compatible = "operating-points-v2"; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <84000000>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <111000000>; |
| }; |
| opp02 { |
| opp-hz = /bits/ 64 <134000000>; |
| }; |
| opp03 { |
| opp-hz = /bits/ 64 <167000000>; |
| }; |
| }; |
| |
| bus_disp1_fimd_opp_table: opp_table13 { |
| compatible = "operating-points-v2"; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <120000000>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <200000000>; |
| }; |
| }; |
| |
| bus_disp1_opp_table: opp_table14 { |
| compatible = "operating-points-v2"; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <120000000>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <200000000>; |
| }; |
| opp02 { |
| opp-hz = /bits/ 64 <300000000>; |
| }; |
| }; |
| |
| bus_gscl_opp_table: opp_table15 { |
| compatible = "operating-points-v2"; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <150000000>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <200000000>; |
| }; |
| opp02 { |
| opp-hz = /bits/ 64 <300000000>; |
| }; |
| }; |
| |
| bus_mscl_opp_table: opp_table16 { |
| compatible = "operating-points-v2"; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <84000000>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <167000000>; |
| }; |
| opp02 { |
| opp-hz = /bits/ 64 <222000000>; |
| }; |
| opp03 { |
| opp-hz = /bits/ 64 <333000000>; |
| }; |
| opp04 { |
| opp-hz = /bits/ 64 <400000000>; |
| }; |
| }; |
| }; |
| |
| thermal-zones { |
| cpu0_thermal: cpu0-thermal { |
| thermal-sensors = <&tmu_cpu0>; |
| #include "exynos5420-trip-points.dtsi" |
| }; |
| cpu1_thermal: cpu1-thermal { |
| thermal-sensors = <&tmu_cpu1>; |
| #include "exynos5420-trip-points.dtsi" |
| }; |
| cpu2_thermal: cpu2-thermal { |
| thermal-sensors = <&tmu_cpu2>; |
| #include "exynos5420-trip-points.dtsi" |
| }; |
| cpu3_thermal: cpu3-thermal { |
| thermal-sensors = <&tmu_cpu3>; |
| #include "exynos5420-trip-points.dtsi" |
| }; |
| gpu_thermal: gpu-thermal { |
| thermal-sensors = <&tmu_gpu>; |
| #include "exynos5420-trip-points.dtsi" |
| }; |
| }; |
| }; |
| |
| &dp { |
| clocks = <&clock CLK_DP1>; |
| clock-names = "dp"; |
| phys = <&dp_phy>; |
| phy-names = "dp"; |
| power-domains = <&disp_pd>; |
| }; |
| |
| &fimd { |
| compatible = "samsung,exynos5420-fimd"; |
| clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; |
| clock-names = "sclk_fimd", "fimd"; |
| power-domains = <&disp_pd>; |
| iommus = <&sysmmu_fimd1_0>, <&sysmmu_fimd1_1>; |
| iommu-names = "m0", "m1"; |
| }; |
| |
| &i2c_0 { |
| clocks = <&clock CLK_I2C0>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_bus>; |
| }; |
| |
| &i2c_1 { |
| clocks = <&clock CLK_I2C1>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_bus>; |
| }; |
| |
| &i2c_2 { |
| clocks = <&clock CLK_I2C2>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_bus>; |
| }; |
| |
| &i2c_3 { |
| clocks = <&clock CLK_I2C3>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_bus>; |
| }; |
| |
| &hsi2c_4 { |
| clocks = <&clock CLK_USI0>; |
| clock-names = "hsi2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c4_hs_bus>; |
| }; |
| |
| &hsi2c_5 { |
| clocks = <&clock CLK_USI1>; |
| clock-names = "hsi2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c5_hs_bus>; |
| }; |
| |
| &hsi2c_6 { |
| clocks = <&clock CLK_USI2>; |
| clock-names = "hsi2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c6_hs_bus>; |
| }; |
| |
| &hsi2c_7 { |
| clocks = <&clock CLK_USI3>; |
| clock-names = "hsi2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c7_hs_bus>; |
| }; |
| |
| &mct { |
| clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; |
| clock-names = "fin_pll", "mct"; |
| }; |
| |
| &pwm { |
| clocks = <&clock CLK_PWM>; |
| clock-names = "timers"; |
| }; |
| |
| &rtc { |
| clocks = <&clock CLK_RTC>; |
| clock-names = "rtc"; |
| interrupt-parent = <&pmu_system_controller>; |
| status = "disabled"; |
| }; |
| |
| &serial_0 { |
| clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; |
| clock-names = "uart", "clk_uart_baud0"; |
| dmas = <&pdma0 13>, <&pdma0 14>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| &serial_1 { |
| clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; |
| clock-names = "uart", "clk_uart_baud0"; |
| dmas = <&pdma1 15>, <&pdma1 16>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| &serial_2 { |
| clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; |
| clock-names = "uart", "clk_uart_baud0"; |
| dmas = <&pdma0 15>, <&pdma0 16>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| &serial_3 { |
| clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; |
| clock-names = "uart", "clk_uart_baud0"; |
| dmas = <&pdma1 17>, <&pdma1 18>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| &sss { |
| clocks = <&clock CLK_SSS>; |
| clock-names = "secss"; |
| }; |
| |
| &usbdrd3_0 { |
| clocks = <&clock CLK_USBD300>; |
| clock-names = "usbdrd30"; |
| }; |
| |
| &usbdrd_phy0 { |
| clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>; |
| clock-names = "phy", "ref"; |
| samsung,pmu-syscon = <&pmu_system_controller>; |
| }; |
| |
| &usbdrd3_1 { |
| clocks = <&clock CLK_USBD301>; |
| clock-names = "usbdrd30"; |
| }; |
| |
| &usbdrd_dwc3_1 { |
| interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| &usbdrd_phy1 { |
| clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>; |
| clock-names = "phy", "ref"; |
| samsung,pmu-syscon = <&pmu_system_controller>; |
| }; |
| |
| &usbhost1 { |
| clocks = <&clock CLK_USBH20>; |
| clock-names = "usbhost"; |
| }; |
| |
| &usbhost2 { |
| clocks = <&clock CLK_USBH20>; |
| clock-names = "usbhost"; |
| }; |
| |
| &usb2_phy { |
| clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>; |
| clock-names = "phy", "ref"; |
| samsung,sysreg-phandle = <&sysreg_system_controller>; |
| samsung,pmureg-phandle = <&pmu_system_controller>; |
| }; |
| |
| &watchdog { |
| clocks = <&clock CLK_WDT>; |
| clock-names = "watchdog"; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| }; |
| |
| #include "exynos5420-pinctrl.dtsi" |