| /* |
| * Broadcom specific AMBA |
| * PCI Host |
| * |
| * Licensed under the GNU/GPL. See COPYING for details. |
| */ |
| |
| #include "bcma_private.h" |
| #include <linux/slab.h> |
| #include <linux/bcma/bcma.h> |
| #include <linux/pci.h> |
| #include <linux/module.h> |
| |
| static void bcma_host_pci_switch_core(struct bcma_device *core) |
| { |
| pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN, |
| core->addr); |
| pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2, |
| core->wrap); |
| core->bus->mapped_core = core; |
| bcma_debug(core->bus, "Switched to core: 0x%X\n", core->id.id); |
| } |
| |
| /* Provides access to the requested core. Returns base offset that has to be |
| * used. It makes use of fixed windows when possible. */ |
| static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core) |
| { |
| switch (core->id.id) { |
| case BCMA_CORE_CHIPCOMMON: |
| return 3 * BCMA_CORE_SIZE; |
| case BCMA_CORE_PCIE: |
| return 2 * BCMA_CORE_SIZE; |
| } |
| |
| if (core->bus->mapped_core != core) |
| bcma_host_pci_switch_core(core); |
| return 0; |
| } |
| |
| static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) |
| { |
| offset += bcma_host_pci_provide_access_to_core(core); |
| return ioread8(core->bus->mmio + offset); |
| } |
| |
| static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) |
| { |
| offset += bcma_host_pci_provide_access_to_core(core); |
| return ioread16(core->bus->mmio + offset); |
| } |
| |
| static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) |
| { |
| offset += bcma_host_pci_provide_access_to_core(core); |
| return ioread32(core->bus->mmio + offset); |
| } |
| |
| static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, |
| u8 value) |
| { |
| offset += bcma_host_pci_provide_access_to_core(core); |
| iowrite8(value, core->bus->mmio + offset); |
| } |
| |
| static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, |
| u16 value) |
| { |
| offset += bcma_host_pci_provide_access_to_core(core); |
| iowrite16(value, core->bus->mmio + offset); |
| } |
| |
| static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, |
| u32 value) |
| { |
| offset += bcma_host_pci_provide_access_to_core(core); |
| iowrite32(value, core->bus->mmio + offset); |
| } |
| |
| #ifdef CONFIG_BCMA_BLOCKIO |
| static void bcma_host_pci_block_read(struct bcma_device *core, void *buffer, |
| size_t count, u16 offset, u8 reg_width) |
| { |
| void __iomem *addr = core->bus->mmio + offset; |
| if (core->bus->mapped_core != core) |
| bcma_host_pci_switch_core(core); |
| switch (reg_width) { |
| case sizeof(u8): |
| ioread8_rep(addr, buffer, count); |
| break; |
| case sizeof(u16): |
| WARN_ON(count & 1); |
| ioread16_rep(addr, buffer, count >> 1); |
| break; |
| case sizeof(u32): |
| WARN_ON(count & 3); |
| ioread32_rep(addr, buffer, count >> 2); |
| break; |
| default: |
| WARN_ON(1); |
| } |
| } |
| |
| static void bcma_host_pci_block_write(struct bcma_device *core, |
| const void *buffer, size_t count, |
| u16 offset, u8 reg_width) |
| { |
| void __iomem *addr = core->bus->mmio + offset; |
| if (core->bus->mapped_core != core) |
| bcma_host_pci_switch_core(core); |
| switch (reg_width) { |
| case sizeof(u8): |
| iowrite8_rep(addr, buffer, count); |
| break; |
| case sizeof(u16): |
| WARN_ON(count & 1); |
| iowrite16_rep(addr, buffer, count >> 1); |
| break; |
| case sizeof(u32): |
| WARN_ON(count & 3); |
| iowrite32_rep(addr, buffer, count >> 2); |
| break; |
| default: |
| WARN_ON(1); |
| } |
| } |
| #endif |
| |
| static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset) |
| { |
| if (core->bus->mapped_core != core) |
| bcma_host_pci_switch_core(core); |
| return ioread32(core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset); |
| } |
| |
| static void bcma_host_pci_awrite32(struct bcma_device *core, u16 offset, |
| u32 value) |
| { |
| if (core->bus->mapped_core != core) |
| bcma_host_pci_switch_core(core); |
| iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset); |
| } |
| |
| static const struct bcma_host_ops bcma_host_pci_ops = { |
| .read8 = bcma_host_pci_read8, |
| .read16 = bcma_host_pci_read16, |
| .read32 = bcma_host_pci_read32, |
| .write8 = bcma_host_pci_write8, |
| .write16 = bcma_host_pci_write16, |
| .write32 = bcma_host_pci_write32, |
| #ifdef CONFIG_BCMA_BLOCKIO |
| .block_read = bcma_host_pci_block_read, |
| .block_write = bcma_host_pci_block_write, |
| #endif |
| .aread32 = bcma_host_pci_aread32, |
| .awrite32 = bcma_host_pci_awrite32, |
| }; |
| |
| static int __devinit bcma_host_pci_probe(struct pci_dev *dev, |
| const struct pci_device_id *id) |
| { |
| struct bcma_bus *bus; |
| int err = -ENOMEM; |
| const char *name; |
| u32 val; |
| |
| /* Alloc */ |
| bus = kzalloc(sizeof(*bus), GFP_KERNEL); |
| if (!bus) |
| goto out; |
| |
| /* Basic PCI configuration */ |
| err = pci_enable_device(dev); |
| if (err) |
| goto err_kfree_bus; |
| |
| name = dev_name(&dev->dev); |
| if (dev->driver && dev->driver->name) |
| name = dev->driver->name; |
| err = pci_request_regions(dev, name); |
| if (err) |
| goto err_pci_disable; |
| pci_set_master(dev); |
| |
| /* Disable the RETRY_TIMEOUT register (0x41) to keep |
| * PCI Tx retries from interfering with C3 CPU state */ |
| pci_read_config_dword(dev, 0x40, &val); |
| if ((val & 0x0000ff00) != 0) |
| pci_write_config_dword(dev, 0x40, val & 0xffff00ff); |
| |
| /* SSB needed additional powering up, do we have any AMBA PCI cards? */ |
| if (!pci_is_pcie(dev)) |
| bcma_err(bus, "PCI card detected, report problems.\n"); |
| |
| /* Map MMIO */ |
| err = -ENOMEM; |
| bus->mmio = pci_iomap(dev, 0, ~0UL); |
| if (!bus->mmio) |
| goto err_pci_release_regions; |
| |
| /* Host specific */ |
| bus->host_pci = dev; |
| bus->hosttype = BCMA_HOSTTYPE_PCI; |
| bus->ops = &bcma_host_pci_ops; |
| |
| bus->boardinfo.vendor = bus->host_pci->subsystem_vendor; |
| bus->boardinfo.type = bus->host_pci->subsystem_device; |
| |
| /* Register */ |
| err = bcma_bus_register(bus); |
| if (err) |
| goto err_pci_unmap_mmio; |
| |
| pci_set_drvdata(dev, bus); |
| |
| out: |
| return err; |
| |
| err_pci_unmap_mmio: |
| pci_iounmap(dev, bus->mmio); |
| err_pci_release_regions: |
| pci_release_regions(dev); |
| err_pci_disable: |
| pci_disable_device(dev); |
| err_kfree_bus: |
| kfree(bus); |
| return err; |
| } |
| |
| static void __devexit bcma_host_pci_remove(struct pci_dev *dev) |
| { |
| struct bcma_bus *bus = pci_get_drvdata(dev); |
| |
| bcma_bus_unregister(bus); |
| pci_iounmap(dev, bus->mmio); |
| pci_release_regions(dev); |
| pci_disable_device(dev); |
| kfree(bus); |
| pci_set_drvdata(dev, NULL); |
| } |
| |
| #ifdef CONFIG_PM |
| static int bcma_host_pci_suspend(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct bcma_bus *bus = pci_get_drvdata(pdev); |
| |
| bus->mapped_core = NULL; |
| |
| return bcma_bus_suspend(bus); |
| } |
| |
| static int bcma_host_pci_resume(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct bcma_bus *bus = pci_get_drvdata(pdev); |
| |
| return bcma_bus_resume(bus); |
| } |
| |
| static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend, |
| bcma_host_pci_resume); |
| #define BCMA_PM_OPS (&bcma_pm_ops) |
| |
| #else /* CONFIG_PM */ |
| |
| #define BCMA_PM_OPS NULL |
| |
| #endif /* CONFIG_PM */ |
| |
| static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { |
| { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, |
| { 0, }, |
| }; |
| MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl); |
| |
| static struct pci_driver bcma_pci_bridge_driver = { |
| .name = "bcma-pci-bridge", |
| .id_table = bcma_pci_bridge_tbl, |
| .probe = bcma_host_pci_probe, |
| .remove = __devexit_p(bcma_host_pci_remove), |
| .driver.pm = BCMA_PM_OPS, |
| }; |
| |
| int __init bcma_host_pci_init(void) |
| { |
| return pci_register_driver(&bcma_pci_bridge_driver); |
| } |
| |
| void __exit bcma_host_pci_exit(void) |
| { |
| pci_unregister_driver(&bcma_pci_bridge_driver); |
| } |