| #include <linux/spinlock.h> |
| #include <linux/cpu.h> |
| #include <linux/interrupt.h> |
| |
| #include <asm/tlbflush.h> |
| |
| DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate) |
| ____cacheline_aligned = { &init_mm, 0, }; |
| |
| /* must come after the send_IPI functions above for inlining */ |
| #include <mach_ipi.h> |
| |
| /* |
| * Smarter SMP flushing macros. |
| * c/o Linus Torvalds. |
| * |
| * These mean you can really definitely utterly forget about |
| * writing to user space from interrupts. (Its not allowed anyway). |
| * |
| * Optimizations Manfred Spraul <manfred@colorfullife.com> |
| */ |
| |
| static cpumask_t flush_cpumask; |
| static struct mm_struct *flush_mm; |
| static unsigned long flush_va; |
| static DEFINE_SPINLOCK(tlbstate_lock); |
| |
| /* |
| * We cannot call mmdrop() because we are in interrupt context, |
| * instead update mm->cpu_vm_mask. |
| * |
| * We need to reload %cr3 since the page tables may be going |
| * away from under us.. |
| */ |
| void leave_mm(int cpu) |
| { |
| if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) |
| BUG(); |
| cpu_clear(cpu, per_cpu(cpu_tlbstate, cpu).active_mm->cpu_vm_mask); |
| load_cr3(swapper_pg_dir); |
| } |
| EXPORT_SYMBOL_GPL(leave_mm); |
| |
| /* |
| * |
| * The flush IPI assumes that a thread switch happens in this order: |
| * [cpu0: the cpu that switches] |
| * 1) switch_mm() either 1a) or 1b) |
| * 1a) thread switch to a different mm |
| * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask); |
| * Stop ipi delivery for the old mm. This is not synchronized with |
| * the other cpus, but smp_invalidate_interrupt ignore flush ipis |
| * for the wrong mm, and in the worst case we perform a superfluous |
| * tlb flush. |
| * 1a2) set cpu_tlbstate to TLBSTATE_OK |
| * Now the smp_invalidate_interrupt won't call leave_mm if cpu0 |
| * was in lazy tlb mode. |
| * 1a3) update cpu_tlbstate[].active_mm |
| * Now cpu0 accepts tlb flushes for the new mm. |
| * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask); |
| * Now the other cpus will send tlb flush ipis. |
| * 1a4) change cr3. |
| * 1b) thread switch without mm change |
| * cpu_tlbstate[].active_mm is correct, cpu0 already handles |
| * flush ipis. |
| * 1b1) set cpu_tlbstate to TLBSTATE_OK |
| * 1b2) test_and_set the cpu bit in cpu_vm_mask. |
| * Atomically set the bit [other cpus will start sending flush ipis], |
| * and test the bit. |
| * 1b3) if the bit was 0: leave_mm was called, flush the tlb. |
| * 2) switch %%esp, ie current |
| * |
| * The interrupt must handle 2 special cases: |
| * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm. |
| * - the cpu performs speculative tlb reads, i.e. even if the cpu only |
| * runs in kernel space, the cpu could load tlb entries for user space |
| * pages. |
| * |
| * The good news is that cpu_tlbstate is local to each cpu, no |
| * write/read ordering problems. |
| */ |
| |
| /* |
| * TLB flush IPI: |
| * |
| * 1) Flush the tlb entries if the cpu uses the mm that's being flushed. |
| * 2) Leave the mm if we are in the lazy tlb mode. |
| */ |
| |
| void smp_invalidate_interrupt(struct pt_regs *regs) |
| { |
| unsigned long cpu; |
| |
| cpu = get_cpu(); |
| |
| if (!cpu_isset(cpu, flush_cpumask)) |
| goto out; |
| /* |
| * This was a BUG() but until someone can quote me the |
| * line from the intel manual that guarantees an IPI to |
| * multiple CPUs is retried _only_ on the erroring CPUs |
| * its staying as a return |
| * |
| * BUG(); |
| */ |
| |
| if (flush_mm == per_cpu(cpu_tlbstate, cpu).active_mm) { |
| if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) { |
| if (flush_va == TLB_FLUSH_ALL) |
| local_flush_tlb(); |
| else |
| __flush_tlb_one(flush_va); |
| } else |
| leave_mm(cpu); |
| } |
| ack_APIC_irq(); |
| smp_mb__before_clear_bit(); |
| cpu_clear(cpu, flush_cpumask); |
| smp_mb__after_clear_bit(); |
| out: |
| put_cpu_no_resched(); |
| __get_cpu_var(irq_stat).irq_tlb_count++; |
| } |
| |
| void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm, |
| unsigned long va) |
| { |
| cpumask_t cpumask = *cpumaskp; |
| |
| /* |
| * A couple of (to be removed) sanity checks: |
| * |
| * - current CPU must not be in mask |
| * - mask must exist :) |
| */ |
| BUG_ON(cpus_empty(cpumask)); |
| BUG_ON(cpu_isset(smp_processor_id(), cpumask)); |
| BUG_ON(!mm); |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| /* If a CPU which we ran on has gone down, OK. */ |
| cpus_and(cpumask, cpumask, cpu_online_map); |
| if (unlikely(cpus_empty(cpumask))) |
| return; |
| #endif |
| |
| /* |
| * i'm not happy about this global shared spinlock in the |
| * MM hot path, but we'll see how contended it is. |
| * AK: x86-64 has a faster method that could be ported. |
| */ |
| spin_lock(&tlbstate_lock); |
| |
| flush_mm = mm; |
| flush_va = va; |
| cpus_or(flush_cpumask, cpumask, flush_cpumask); |
| /* |
| * We have to send the IPI only to |
| * CPUs affected. |
| */ |
| send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR); |
| |
| while (!cpus_empty(flush_cpumask)) |
| /* nothing. lockup detection does not belong here */ |
| cpu_relax(); |
| |
| flush_mm = NULL; |
| flush_va = 0; |
| spin_unlock(&tlbstate_lock); |
| } |
| |
| void flush_tlb_current_task(void) |
| { |
| struct mm_struct *mm = current->mm; |
| cpumask_t cpu_mask; |
| |
| preempt_disable(); |
| cpu_mask = mm->cpu_vm_mask; |
| cpu_clear(smp_processor_id(), cpu_mask); |
| |
| local_flush_tlb(); |
| if (!cpus_empty(cpu_mask)) |
| flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL); |
| preempt_enable(); |
| } |
| |
| void flush_tlb_mm(struct mm_struct *mm) |
| { |
| cpumask_t cpu_mask; |
| |
| preempt_disable(); |
| cpu_mask = mm->cpu_vm_mask; |
| cpu_clear(smp_processor_id(), cpu_mask); |
| |
| if (current->active_mm == mm) { |
| if (current->mm) |
| local_flush_tlb(); |
| else |
| leave_mm(smp_processor_id()); |
| } |
| if (!cpus_empty(cpu_mask)) |
| flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL); |
| |
| preempt_enable(); |
| } |
| |
| void flush_tlb_page(struct vm_area_struct *vma, unsigned long va) |
| { |
| struct mm_struct *mm = vma->vm_mm; |
| cpumask_t cpu_mask; |
| |
| preempt_disable(); |
| cpu_mask = mm->cpu_vm_mask; |
| cpu_clear(smp_processor_id(), cpu_mask); |
| |
| if (current->active_mm == mm) { |
| if (current->mm) |
| __flush_tlb_one(va); |
| else |
| leave_mm(smp_processor_id()); |
| } |
| |
| if (!cpus_empty(cpu_mask)) |
| flush_tlb_others(cpu_mask, mm, va); |
| |
| preempt_enable(); |
| } |
| EXPORT_SYMBOL(flush_tlb_page); |
| |
| static void do_flush_tlb_all(void *info) |
| { |
| unsigned long cpu = smp_processor_id(); |
| |
| __flush_tlb_all(); |
| if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_LAZY) |
| leave_mm(cpu); |
| } |
| |
| void flush_tlb_all(void) |
| { |
| on_each_cpu(do_flush_tlb_all, NULL, 1); |
| } |
| |
| void reset_lazy_tlbstate(void) |
| { |
| int cpu = raw_smp_processor_id(); |
| |
| per_cpu(cpu_tlbstate, cpu).state = 0; |
| per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm; |
| } |
| |