| # |
| # Miscellaneous I2C chip drivers configuration |
| # |
| |
| menu "Miscellaneous I2C Chip support" |
| |
| config DS1682 |
| tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" |
| depends on EXPERIMENTAL |
| help |
| If you say yes here you get support for Dallas Semiconductor |
| DS1682 Total Elapsed Time Recorder. |
| |
| This driver can also be built as a module. If so, the module |
| will be called ds1682. |
| |
| config SENSORS_EEPROM |
| tristate "EEPROM reader" |
| depends on EXPERIMENTAL |
| help |
| If you say yes here you get read-only access to the EEPROM data |
| available on modern memory DIMMs and Sony Vaio laptops. Such |
| EEPROMs could theoretically be available on other devices as well. |
| |
| This driver can also be built as a module. If so, the module |
| will be called eeprom. |
| |
| config SENSORS_PCF8574 |
| tristate "Philips PCF8574 and PCF8574A" |
| depends on EXPERIMENTAL |
| default n |
| help |
| If you say yes here you get support for Philips PCF8574 and |
| PCF8574A chips. These chips are 8-bit I/O expanders for the I2C bus. |
| |
| This driver can also be built as a module. If so, the module |
| will be called pcf8574. |
| |
| These devices are hard to detect and rarely found on mainstream |
| hardware. If unsure, say N. |
| |
| config PCF8575 |
| tristate "Philips PCF8575" |
| default n |
| help |
| If you say yes here you get support for Philips PCF8575 chip. |
| This chip is a 16-bit I/O expander for the I2C bus. Several other |
| chip manufacturers sell equivalent chips, e.g. Texas Instruments. |
| |
| This driver can also be built as a module. If so, the module |
| will be called pcf8575. |
| |
| This device is hard to detect and is rarely found on mainstream |
| hardware. If unsure, say N. |
| |
| config SENSORS_PCA9539 |
| tristate "Philips PCA9539 16-bit I/O port" |
| depends on EXPERIMENTAL |
| help |
| If you say yes here you get support for the Philips PCA9539 |
| 16-bit I/O port. |
| |
| This driver can also be built as a module. If so, the module |
| will be called pca9539. |
| |
| config SENSORS_PCF8591 |
| tristate "Philips PCF8591" |
| depends on EXPERIMENTAL |
| default n |
| help |
| If you say yes here you get support for Philips PCF8591 chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called pcf8591. |
| |
| These devices are hard to detect and rarely found on mainstream |
| hardware. If unsure, say N. |
| |
| config ISP1301_OMAP |
| tristate "Philips ISP1301 with OMAP OTG" |
| depends on ARCH_OMAP_OTG |
| help |
| If you say yes here you get support for the Philips ISP1301 |
| USB-On-The-Go transceiver working with the OMAP OTG controller. |
| The ISP1301 is used in products including H2 and H3 development |
| boards for Texas Instruments OMAP processors. |
| |
| This driver can also be built as a module. If so, the module |
| will be called isp1301_omap. |
| |
| config TPS65010 |
| tristate "TPS6501x Power Management chips" |
| default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK |
| help |
| If you say yes here you get support for the TPS6501x series of |
| Power Management chips. These include voltage regulators, |
| lithium ion/polymer battery charging, and other features that |
| are often used in portable devices like cell phones and cameras. |
| |
| This driver can also be built as a module. If so, the module |
| will be called tps65010. |
| |
| config SENSORS_MAX6875 |
| tristate "Maxim MAX6875 Power supply supervisor" |
| depends on EXPERIMENTAL |
| help |
| If you say yes here you get support for the Maxim MAX6875 |
| EEPROM-programmable, quad power-supply sequencer/supervisor. |
| |
| This provides an interface to program the EEPROM and reset the chip. |
| |
| This driver also supports the Maxim MAX6874 hex power-supply |
| sequencer/supervisor if found at a compatible address. |
| |
| This driver can also be built as a module. If so, the module |
| will be called max6875. |
| |
| config SENSORS_TSL2550 |
| tristate "Taos TSL2550 ambient light sensor" |
| depends on EXPERIMENTAL |
| help |
| If you say yes here you get support for the Taos TSL2550 |
| ambient light sensor. |
| |
| This driver can also be built as a module. If so, the module |
| will be called tsl2550. |
| |
| config MENELAUS |
| bool "TWL92330/Menelaus PM chip" |
| depends on I2C=y && ARCH_OMAP24XX |
| help |
| If you say yes here you get support for the Texas Instruments |
| TWL92330/Menelaus Power Management chip. This include voltage |
| regulators, Dual slot memory card tranceivers, real-time clock |
| and other features that are often used in portable devices like |
| cell phones and PDAs. |
| |
| endmenu |