| /* |
| * Hardware monitoring driver for LTC2974, LTC2977, LTC2978, LTC3880, |
| * LTC3883, LTC3887. and LTM4676 |
| * |
| * Copyright (c) 2011 Ericsson AB. |
| * Copyright (c) 2013, 2014 Guenter Roeck |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/regulator/driver.h> |
| #include "pmbus.h" |
| |
| enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3882, ltc3883, ltc3887, |
| ltm4676 }; |
| |
| /* Common for all chips */ |
| #define LTC2978_MFR_VOUT_PEAK 0xdd |
| #define LTC2978_MFR_VIN_PEAK 0xde |
| #define LTC2978_MFR_TEMPERATURE_PEAK 0xdf |
| #define LTC2978_MFR_SPECIAL_ID 0xe7 /* Not on LTC3882 */ |
| |
| /* LTC2974, LCT2977, and LTC2978 */ |
| #define LTC2978_MFR_VOUT_MIN 0xfb |
| #define LTC2978_MFR_VIN_MIN 0xfc |
| #define LTC2978_MFR_TEMPERATURE_MIN 0xfd |
| |
| /* LTC2974 only */ |
| #define LTC2974_MFR_IOUT_PEAK 0xd7 |
| #define LTC2974_MFR_IOUT_MIN 0xd8 |
| |
| /* LTC3880, LTC3882, LTC3883, LTC3887, and LTM4676 */ |
| #define LTC3880_MFR_IOUT_PEAK 0xd7 |
| #define LTC3880_MFR_CLEAR_PEAKS 0xe3 |
| #define LTC3880_MFR_TEMPERATURE2_PEAK 0xf4 |
| |
| /* LTC3883 only */ |
| #define LTC3883_MFR_IIN_PEAK 0xe1 |
| |
| #define LTC2974_ID_REV1 0x0212 |
| #define LTC2974_ID_REV2 0x0213 |
| #define LTC2977_ID 0x0130 |
| #define LTC2978_ID_REV1 0x0121 |
| #define LTC2978_ID_REV2 0x0122 |
| #define LTC2978A_ID 0x0124 |
| #define LTC3880_ID 0x4000 |
| #define LTC3880_ID_MASK 0xff00 |
| #define LTC3883_ID 0x4300 |
| #define LTC3883_ID_MASK 0xff00 |
| #define LTC3887_ID 0x4700 |
| #define LTC3887_ID_MASK 0xff00 |
| #define LTM4676_ID 0x4400 |
| #define LTM4676_ID_2 0x4480 |
| #define LTM4676A_ID 0x47e0 |
| #define LTM4676_ID_MASK 0xfff0 |
| |
| #define LTC2974_NUM_PAGES 4 |
| #define LTC2978_NUM_PAGES 8 |
| #define LTC3880_NUM_PAGES 2 |
| #define LTC3883_NUM_PAGES 1 |
| |
| /* |
| * LTC2978 clears peak data whenever the CLEAR_FAULTS command is executed, which |
| * happens pretty much each time chip data is updated. Raw peak data therefore |
| * does not provide much value. To be able to provide useful peak data, keep an |
| * internal cache of measured peak data, which is only cleared if an explicit |
| * "clear peak" command is executed for the sensor in question. |
| */ |
| |
| struct ltc2978_data { |
| enum chips id; |
| u16 vin_min, vin_max; |
| u16 temp_min[LTC2974_NUM_PAGES], temp_max[LTC2974_NUM_PAGES]; |
| u16 vout_min[LTC2978_NUM_PAGES], vout_max[LTC2978_NUM_PAGES]; |
| u16 iout_min[LTC2974_NUM_PAGES], iout_max[LTC2974_NUM_PAGES]; |
| u16 iin_max; |
| u16 temp2_max; |
| struct pmbus_driver_info info; |
| }; |
| |
| #define to_ltc2978_data(x) container_of(x, struct ltc2978_data, info) |
| |
| static inline int lin11_to_val(int data) |
| { |
| s16 e = ((s16)data) >> 11; |
| s32 m = (((s16)(data << 5)) >> 5); |
| |
| /* |
| * mantissa is 10 bit + sign, exponent adds up to 15 bit. |
| * Add 6 bit to exponent for maximum accuracy (10 + 15 + 6 = 31). |
| */ |
| e += 6; |
| return (e < 0 ? m >> -e : m << e); |
| } |
| |
| static int ltc2978_read_word_data_common(struct i2c_client *client, int page, |
| int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct ltc2978_data *data = to_ltc2978_data(info); |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VIRT_READ_VIN_MAX: |
| ret = pmbus_read_word_data(client, page, LTC2978_MFR_VIN_PEAK); |
| if (ret >= 0) { |
| if (lin11_to_val(ret) > lin11_to_val(data->vin_max)) |
| data->vin_max = ret; |
| ret = data->vin_max; |
| } |
| break; |
| case PMBUS_VIRT_READ_VOUT_MAX: |
| ret = pmbus_read_word_data(client, page, LTC2978_MFR_VOUT_PEAK); |
| if (ret >= 0) { |
| /* |
| * VOUT is 16 bit unsigned with fixed exponent, |
| * so we can compare it directly |
| */ |
| if (ret > data->vout_max[page]) |
| data->vout_max[page] = ret; |
| ret = data->vout_max[page]; |
| } |
| break; |
| case PMBUS_VIRT_READ_TEMP_MAX: |
| ret = pmbus_read_word_data(client, page, |
| LTC2978_MFR_TEMPERATURE_PEAK); |
| if (ret >= 0) { |
| if (lin11_to_val(ret) |
| > lin11_to_val(data->temp_max[page])) |
| data->temp_max[page] = ret; |
| ret = data->temp_max[page]; |
| } |
| break; |
| case PMBUS_VIRT_RESET_VOUT_HISTORY: |
| case PMBUS_VIRT_RESET_VIN_HISTORY: |
| case PMBUS_VIRT_RESET_TEMP_HISTORY: |
| ret = 0; |
| break; |
| default: |
| ret = -ENODATA; |
| break; |
| } |
| return ret; |
| } |
| |
| static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct ltc2978_data *data = to_ltc2978_data(info); |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VIRT_READ_VIN_MIN: |
| ret = pmbus_read_word_data(client, page, LTC2978_MFR_VIN_MIN); |
| if (ret >= 0) { |
| if (lin11_to_val(ret) < lin11_to_val(data->vin_min)) |
| data->vin_min = ret; |
| ret = data->vin_min; |
| } |
| break; |
| case PMBUS_VIRT_READ_VOUT_MIN: |
| ret = pmbus_read_word_data(client, page, LTC2978_MFR_VOUT_MIN); |
| if (ret >= 0) { |
| /* |
| * VOUT_MIN is known to not be supported on some lots |
| * of LTC2978 revision 1, and will return the maximum |
| * possible voltage if read. If VOUT_MAX is valid and |
| * lower than the reading of VOUT_MIN, use it instead. |
| */ |
| if (data->vout_max[page] && ret > data->vout_max[page]) |
| ret = data->vout_max[page]; |
| if (ret < data->vout_min[page]) |
| data->vout_min[page] = ret; |
| ret = data->vout_min[page]; |
| } |
| break; |
| case PMBUS_VIRT_READ_TEMP_MIN: |
| ret = pmbus_read_word_data(client, page, |
| LTC2978_MFR_TEMPERATURE_MIN); |
| if (ret >= 0) { |
| if (lin11_to_val(ret) |
| < lin11_to_val(data->temp_min[page])) |
| data->temp_min[page] = ret; |
| ret = data->temp_min[page]; |
| } |
| break; |
| case PMBUS_VIRT_READ_IOUT_MAX: |
| case PMBUS_VIRT_RESET_IOUT_HISTORY: |
| case PMBUS_VIRT_READ_TEMP2_MAX: |
| case PMBUS_VIRT_RESET_TEMP2_HISTORY: |
| ret = -ENXIO; |
| break; |
| default: |
| ret = ltc2978_read_word_data_common(client, page, reg); |
| break; |
| } |
| return ret; |
| } |
| |
| static int ltc2974_read_word_data(struct i2c_client *client, int page, int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct ltc2978_data *data = to_ltc2978_data(info); |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VIRT_READ_IOUT_MAX: |
| ret = pmbus_read_word_data(client, page, LTC2974_MFR_IOUT_PEAK); |
| if (ret >= 0) { |
| if (lin11_to_val(ret) |
| > lin11_to_val(data->iout_max[page])) |
| data->iout_max[page] = ret; |
| ret = data->iout_max[page]; |
| } |
| break; |
| case PMBUS_VIRT_READ_IOUT_MIN: |
| ret = pmbus_read_word_data(client, page, LTC2974_MFR_IOUT_MIN); |
| if (ret >= 0) { |
| if (lin11_to_val(ret) |
| < lin11_to_val(data->iout_min[page])) |
| data->iout_min[page] = ret; |
| ret = data->iout_min[page]; |
| } |
| break; |
| case PMBUS_VIRT_RESET_IOUT_HISTORY: |
| ret = 0; |
| break; |
| default: |
| ret = ltc2978_read_word_data(client, page, reg); |
| break; |
| } |
| return ret; |
| } |
| |
| static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct ltc2978_data *data = to_ltc2978_data(info); |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VIRT_READ_IOUT_MAX: |
| ret = pmbus_read_word_data(client, page, LTC3880_MFR_IOUT_PEAK); |
| if (ret >= 0) { |
| if (lin11_to_val(ret) |
| > lin11_to_val(data->iout_max[page])) |
| data->iout_max[page] = ret; |
| ret = data->iout_max[page]; |
| } |
| break; |
| case PMBUS_VIRT_READ_TEMP2_MAX: |
| ret = pmbus_read_word_data(client, page, |
| LTC3880_MFR_TEMPERATURE2_PEAK); |
| if (ret >= 0) { |
| if (lin11_to_val(ret) > lin11_to_val(data->temp2_max)) |
| data->temp2_max = ret; |
| ret = data->temp2_max; |
| } |
| break; |
| case PMBUS_VIRT_READ_VIN_MIN: |
| case PMBUS_VIRT_READ_VOUT_MIN: |
| case PMBUS_VIRT_READ_TEMP_MIN: |
| ret = -ENXIO; |
| break; |
| case PMBUS_VIRT_RESET_IOUT_HISTORY: |
| case PMBUS_VIRT_RESET_TEMP2_HISTORY: |
| ret = 0; |
| break; |
| default: |
| ret = ltc2978_read_word_data_common(client, page, reg); |
| break; |
| } |
| return ret; |
| } |
| |
| static int ltc3883_read_word_data(struct i2c_client *client, int page, int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct ltc2978_data *data = to_ltc2978_data(info); |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VIRT_READ_IIN_MAX: |
| ret = pmbus_read_word_data(client, page, LTC3883_MFR_IIN_PEAK); |
| if (ret >= 0) { |
| if (lin11_to_val(ret) |
| > lin11_to_val(data->iin_max)) |
| data->iin_max = ret; |
| ret = data->iin_max; |
| } |
| break; |
| case PMBUS_VIRT_RESET_IIN_HISTORY: |
| ret = 0; |
| break; |
| default: |
| ret = ltc3880_read_word_data(client, page, reg); |
| break; |
| } |
| return ret; |
| } |
| |
| static int ltc2978_clear_peaks(struct i2c_client *client, int page, |
| enum chips id) |
| { |
| int ret; |
| |
| if (id == ltc3880 || id == ltc3882 || id == ltc3883 || id == ltc3887 || |
| id == ltm4676) |
| ret = pmbus_write_byte(client, 0, LTC3880_MFR_CLEAR_PEAKS); |
| else |
| ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS); |
| |
| return ret; |
| } |
| |
| static int ltc2978_write_word_data(struct i2c_client *client, int page, |
| int reg, u16 word) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct ltc2978_data *data = to_ltc2978_data(info); |
| int ret; |
| |
| switch (reg) { |
| case PMBUS_VIRT_RESET_IIN_HISTORY: |
| data->iin_max = 0x7c00; |
| ret = ltc2978_clear_peaks(client, page, data->id); |
| break; |
| case PMBUS_VIRT_RESET_IOUT_HISTORY: |
| data->iout_max[page] = 0x7c00; |
| data->iout_min[page] = 0xfbff; |
| ret = ltc2978_clear_peaks(client, page, data->id); |
| break; |
| case PMBUS_VIRT_RESET_TEMP2_HISTORY: |
| data->temp2_max = 0x7c00; |
| ret = ltc2978_clear_peaks(client, page, data->id); |
| break; |
| case PMBUS_VIRT_RESET_VOUT_HISTORY: |
| data->vout_min[page] = 0xffff; |
| data->vout_max[page] = 0; |
| ret = ltc2978_clear_peaks(client, page, data->id); |
| break; |
| case PMBUS_VIRT_RESET_VIN_HISTORY: |
| data->vin_min = 0x7bff; |
| data->vin_max = 0x7c00; |
| ret = ltc2978_clear_peaks(client, page, data->id); |
| break; |
| case PMBUS_VIRT_RESET_TEMP_HISTORY: |
| data->temp_min[page] = 0x7bff; |
| data->temp_max[page] = 0x7c00; |
| ret = ltc2978_clear_peaks(client, page, data->id); |
| break; |
| default: |
| ret = -ENODATA; |
| break; |
| } |
| return ret; |
| } |
| |
| static const struct i2c_device_id ltc2978_id[] = { |
| {"ltc2974", ltc2974}, |
| {"ltc2977", ltc2977}, |
| {"ltc2978", ltc2978}, |
| {"ltc3880", ltc3880}, |
| {"ltc3882", ltc3882}, |
| {"ltc3883", ltc3883}, |
| {"ltc3887", ltc3887}, |
| {"ltm4676", ltm4676}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, ltc2978_id); |
| |
| #if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR) |
| static const struct regulator_desc ltc2978_reg_desc[] = { |
| PMBUS_REGULATOR("vout", 0), |
| PMBUS_REGULATOR("vout", 1), |
| PMBUS_REGULATOR("vout", 2), |
| PMBUS_REGULATOR("vout", 3), |
| PMBUS_REGULATOR("vout", 4), |
| PMBUS_REGULATOR("vout", 5), |
| PMBUS_REGULATOR("vout", 6), |
| PMBUS_REGULATOR("vout", 7), |
| }; |
| #endif /* CONFIG_SENSORS_LTC2978_REGULATOR */ |
| |
| static int ltc2978_get_id(struct i2c_client *client) |
| { |
| int chip_id; |
| |
| chip_id = i2c_smbus_read_word_data(client, LTC2978_MFR_SPECIAL_ID); |
| if (chip_id < 0) { |
| const struct i2c_device_id *id; |
| u8 buf[I2C_SMBUS_BLOCK_MAX]; |
| int ret; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_READ_BLOCK_DATA)) |
| return -ENODEV; |
| |
| ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf); |
| if (ret < 0) |
| return ret; |
| if (ret < 3 || strncmp(buf, "LTC", 3)) |
| return -ENODEV; |
| |
| ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf); |
| if (ret < 0) |
| return ret; |
| for (id = <c2978_id[0]; strlen(id->name); id++) { |
| if (!strncasecmp(id->name, buf, strlen(id->name))) |
| return (int)id->driver_data; |
| } |
| return -ENODEV; |
| } |
| |
| if (chip_id == LTC2974_ID_REV1 || chip_id == LTC2974_ID_REV2) |
| return ltc2974; |
| else if (chip_id == LTC2977_ID) |
| return ltc2977; |
| else if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2 || |
| chip_id == LTC2978A_ID) |
| return ltc2978; |
| else if ((chip_id & LTC3880_ID_MASK) == LTC3880_ID) |
| return ltc3880; |
| else if ((chip_id & LTC3883_ID_MASK) == LTC3883_ID) |
| return ltc3883; |
| else if ((chip_id & LTC3887_ID_MASK) == LTC3887_ID) |
| return ltc3887; |
| else if ((chip_id & LTM4676_ID_MASK) == LTM4676_ID || |
| (chip_id & LTM4676_ID_MASK) == LTM4676_ID_2 || |
| (chip_id & LTM4676_ID_MASK) == LTM4676A_ID) |
| return ltm4676; |
| |
| dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id); |
| return -ENODEV; |
| } |
| |
| static int ltc2978_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int i, chip_id; |
| struct ltc2978_data *data; |
| struct pmbus_driver_info *info; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_READ_WORD_DATA)) |
| return -ENODEV; |
| |
| data = devm_kzalloc(&client->dev, sizeof(struct ltc2978_data), |
| GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| chip_id = ltc2978_get_id(client); |
| if (chip_id < 0) |
| return chip_id; |
| |
| data->id = chip_id; |
| if (data->id != id->driver_data) |
| dev_warn(&client->dev, |
| "Device mismatch: Configured %s, detected %s\n", |
| id->name, |
| ltc2978_id[data->id].name); |
| |
| info = &data->info; |
| info->write_word_data = ltc2978_write_word_data; |
| |
| data->vin_min = 0x7bff; |
| data->vin_max = 0x7c00; |
| for (i = 0; i < ARRAY_SIZE(data->vout_min); i++) |
| data->vout_min[i] = 0xffff; |
| for (i = 0; i < ARRAY_SIZE(data->iout_min); i++) |
| data->iout_min[i] = 0xfbff; |
| for (i = 0; i < ARRAY_SIZE(data->iout_max); i++) |
| data->iout_max[i] = 0x7c00; |
| for (i = 0; i < ARRAY_SIZE(data->temp_min); i++) |
| data->temp_min[i] = 0x7bff; |
| for (i = 0; i < ARRAY_SIZE(data->temp_max); i++) |
| data->temp_max[i] = 0x7c00; |
| data->temp2_max = 0x7c00; |
| |
| switch (data->id) { |
| case ltc2974: |
| info->read_word_data = ltc2974_read_word_data; |
| info->pages = LTC2974_NUM_PAGES; |
| info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_TEMP2; |
| for (i = 0; i < info->pages; i++) { |
| info->func[i] |= PMBUS_HAVE_VOUT |
| | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT |
| | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT; |
| } |
| break; |
| case ltc2977: |
| case ltc2978: |
| info->read_word_data = ltc2978_read_word_data; |
| info->pages = LTC2978_NUM_PAGES; |
| info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; |
| for (i = 1; i < LTC2978_NUM_PAGES; i++) { |
| info->func[i] = PMBUS_HAVE_VOUT |
| | PMBUS_HAVE_STATUS_VOUT; |
| } |
| break; |
| case ltc3880: |
| case ltc3887: |
| case ltm4676: |
| info->read_word_data = ltc3880_read_word_data; |
| info->pages = LTC3880_NUM_PAGES; |
| info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN |
| | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
| | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP |
| | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP; |
| info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
| | PMBUS_HAVE_POUT |
| | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; |
| break; |
| case ltc3882: |
| info->read_word_data = ltc3880_read_word_data; |
| info->pages = LTC3880_NUM_PAGES; |
| info->func[0] = PMBUS_HAVE_VIN |
| | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
| | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP |
| | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP; |
| info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
| | PMBUS_HAVE_POUT |
| | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; |
| break; |
| case ltc3883: |
| info->read_word_data = ltc3883_read_word_data; |
| info->pages = LTC3883_NUM_PAGES; |
| info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN |
| | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
| | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP |
| | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP; |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| #if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR) |
| info->num_regulators = info->pages; |
| info->reg_desc = ltc2978_reg_desc; |
| if (info->num_regulators > ARRAY_SIZE(ltc2978_reg_desc)) { |
| dev_err(&client->dev, "num_regulators too large!"); |
| info->num_regulators = ARRAY_SIZE(ltc2978_reg_desc); |
| } |
| #endif |
| |
| return pmbus_do_probe(client, id, info); |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id ltc2978_of_match[] = { |
| { .compatible = "lltc,ltc2974" }, |
| { .compatible = "lltc,ltc2977" }, |
| { .compatible = "lltc,ltc2978" }, |
| { .compatible = "lltc,ltc3880" }, |
| { .compatible = "lltc,ltc3882" }, |
| { .compatible = "lltc,ltc3883" }, |
| { .compatible = "lltc,ltc3887" }, |
| { .compatible = "lltc,ltm4676" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, ltc2978_of_match); |
| #endif |
| |
| static struct i2c_driver ltc2978_driver = { |
| .driver = { |
| .name = "ltc2978", |
| .of_match_table = of_match_ptr(ltc2978_of_match), |
| }, |
| .probe = ltc2978_probe, |
| .remove = pmbus_do_remove, |
| .id_table = ltc2978_id, |
| }; |
| |
| module_i2c_driver(ltc2978_driver); |
| |
| MODULE_AUTHOR("Guenter Roeck"); |
| MODULE_DESCRIPTION("PMBus driver for LTC2974, LTC2978, LTC3880, LTC3883, and LTM4676"); |
| MODULE_LICENSE("GPL"); |