| /* |
| * xHCI host controller driver PCI Bus Glue. |
| * |
| * Copyright (C) 2008 Intel Corp. |
| * |
| * Author: Sarah Sharp |
| * Some code borrowed from the Linux EHCI driver. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| |
| #include "xhci.h" |
| #include "xhci-trace.h" |
| |
| /* Device for a quirk */ |
| #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 |
| #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 |
| #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400 |
| |
| #define PCI_VENDOR_ID_ETRON 0x1b6f |
| #define PCI_DEVICE_ID_ASROCK_P67 0x7023 |
| |
| #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31 |
| #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 |
| |
| static const char hcd_name[] = "xhci_hcd"; |
| |
| /* called after powerup, by probe or system-pm "wakeup" */ |
| static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev) |
| { |
| /* |
| * TODO: Implement finding debug ports later. |
| * TODO: see if there are any quirks that need to be added to handle |
| * new extended capabilities. |
| */ |
| |
| /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */ |
| if (!pci_set_mwi(pdev)) |
| xhci_dbg(xhci, "MWI active\n"); |
| |
| xhci_dbg(xhci, "Finished xhci_pci_reinit\n"); |
| return 0; |
| } |
| |
| static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| |
| /* Look for vendor-specific quirks */ |
| if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && |
| (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK || |
| pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) { |
| if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && |
| pdev->revision == 0x0) { |
| xhci->quirks |= XHCI_RESET_EP_QUIRK; |
| xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
| "QUIRK: Fresco Logic xHC needs configure" |
| " endpoint cmd after reset endpoint"); |
| } |
| if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && |
| pdev->revision == 0x4) { |
| xhci->quirks |= XHCI_SLOW_SUSPEND; |
| xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
| "QUIRK: Fresco Logic xHC revision %u" |
| "must be suspended extra slowly", |
| pdev->revision); |
| } |
| /* Fresco Logic confirms: all revisions of this chip do not |
| * support MSI, even though some of them claim to in their PCI |
| * capabilities. |
| */ |
| xhci->quirks |= XHCI_BROKEN_MSI; |
| xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
| "QUIRK: Fresco Logic revision %u " |
| "has broken MSI implementation", |
| pdev->revision); |
| xhci->quirks |= XHCI_TRUST_TX_LENGTH; |
| } |
| |
| if (pdev->vendor == PCI_VENDOR_ID_NEC) |
| xhci->quirks |= XHCI_NEC_HOST; |
| |
| if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) |
| xhci->quirks |= XHCI_AMD_0x96_HOST; |
| |
| /* AMD PLL quirk */ |
| if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) |
| xhci->quirks |= XHCI_AMD_PLL_FIX; |
| if (pdev->vendor == PCI_VENDOR_ID_INTEL) { |
| xhci->quirks |= XHCI_LPM_SUPPORT; |
| xhci->quirks |= XHCI_INTEL_HOST; |
| } |
| if (pdev->vendor == PCI_VENDOR_ID_INTEL && |
| pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) { |
| xhci->quirks |= XHCI_EP_LIMIT_QUIRK; |
| xhci->limit_active_eps = 64; |
| xhci->quirks |= XHCI_SW_BW_CHECKING; |
| /* |
| * PPT desktop boards DH77EB and DH77DF will power back on after |
| * a few seconds of being shutdown. The fix for this is to |
| * switch the ports from xHCI to EHCI on shutdown. We can't use |
| * DMI information to find those particular boards (since each |
| * vendor will change the board name), so we have to key off all |
| * PPT chipsets. |
| */ |
| xhci->quirks |= XHCI_SPURIOUS_REBOOT; |
| xhci->quirks |= XHCI_AVOID_BEI; |
| } |
| if (pdev->vendor == PCI_VENDOR_ID_INTEL && |
| (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI || |
| pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI)) { |
| /* Workaround for occasional spurious wakeups from S5 (or |
| * any other sleep) on Haswell machines with LPT and LPT-LP |
| * with the new Intel BIOS |
| */ |
| /* Limit the quirk to only known vendors, as this triggers |
| * yet another BIOS bug on some other machines |
| * https://bugzilla.kernel.org/show_bug.cgi?id=66171 |
| */ |
| if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP) |
| xhci->quirks |= XHCI_SPURIOUS_WAKEUP; |
| } |
| if (pdev->vendor == PCI_VENDOR_ID_ETRON && |
| pdev->device == PCI_DEVICE_ID_ASROCK_P67) { |
| xhci->quirks |= XHCI_RESET_ON_RESUME; |
| xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
| "QUIRK: Resetting on resume"); |
| xhci->quirks |= XHCI_TRUST_TX_LENGTH; |
| } |
| if (pdev->vendor == PCI_VENDOR_ID_RENESAS && |
| pdev->device == 0x0015 && |
| pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG && |
| pdev->subsystem_device == 0xc0cd) |
| xhci->quirks |= XHCI_RESET_ON_RESUME; |
| if (pdev->vendor == PCI_VENDOR_ID_VIA) |
| xhci->quirks |= XHCI_RESET_ON_RESUME; |
| } |
| |
| /* called during probe() after chip reset completes */ |
| static int xhci_pci_setup(struct usb_hcd *hcd) |
| { |
| struct xhci_hcd *xhci; |
| struct pci_dev *pdev = to_pci_dev(hcd->self.controller); |
| int retval; |
| |
| retval = xhci_gen_setup(hcd, xhci_pci_quirks); |
| if (retval) |
| return retval; |
| |
| xhci = hcd_to_xhci(hcd); |
| if (!usb_hcd_is_primary_hcd(hcd)) |
| return 0; |
| |
| pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn); |
| xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn); |
| |
| /* Find any debug ports */ |
| retval = xhci_pci_reinit(xhci, pdev); |
| if (!retval) |
| return retval; |
| |
| kfree(xhci); |
| return retval; |
| } |
| |
| /* |
| * We need to register our own PCI probe function (instead of the USB core's |
| * function) in order to create a second roothub under xHCI. |
| */ |
| static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) |
| { |
| int retval; |
| struct xhci_hcd *xhci; |
| struct hc_driver *driver; |
| struct usb_hcd *hcd; |
| |
| driver = (struct hc_driver *)id->driver_data; |
| /* Register the USB 2.0 roothub. |
| * FIXME: USB core must know to register the USB 2.0 roothub first. |
| * This is sort of silly, because we could just set the HCD driver flags |
| * to say USB 2.0, but I'm not sure what the implications would be in |
| * the other parts of the HCD code. |
| */ |
| retval = usb_hcd_pci_probe(dev, id); |
| |
| if (retval) |
| return retval; |
| |
| /* USB 2.0 roothub is stored in the PCI device now. */ |
| hcd = dev_get_drvdata(&dev->dev); |
| xhci = hcd_to_xhci(hcd); |
| xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev, |
| pci_name(dev), hcd); |
| if (!xhci->shared_hcd) { |
| retval = -ENOMEM; |
| goto dealloc_usb2_hcd; |
| } |
| |
| /* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset) |
| * is called by usb_add_hcd(). |
| */ |
| *((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci; |
| |
| retval = usb_add_hcd(xhci->shared_hcd, dev->irq, |
| IRQF_SHARED); |
| if (retval) |
| goto put_usb3_hcd; |
| /* Roothub already marked as USB 3.0 speed */ |
| |
| if (HCC_MAX_PSA(xhci->hcc_params) >= 4) |
| xhci->shared_hcd->can_do_streams = 1; |
| |
| return 0; |
| |
| put_usb3_hcd: |
| usb_put_hcd(xhci->shared_hcd); |
| dealloc_usb2_hcd: |
| usb_hcd_pci_remove(dev); |
| return retval; |
| } |
| |
| static void xhci_pci_remove(struct pci_dev *dev) |
| { |
| struct xhci_hcd *xhci; |
| |
| xhci = hcd_to_xhci(pci_get_drvdata(dev)); |
| if (xhci->shared_hcd) { |
| usb_remove_hcd(xhci->shared_hcd); |
| usb_put_hcd(xhci->shared_hcd); |
| } |
| usb_hcd_pci_remove(dev); |
| |
| /* Workaround for spurious wakeups at shutdown with HSW */ |
| if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) |
| pci_set_power_state(dev, PCI_D3hot); |
| |
| kfree(xhci); |
| } |
| |
| #ifdef CONFIG_PM |
| static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) |
| { |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| struct pci_dev *pdev = to_pci_dev(hcd->self.controller); |
| |
| /* |
| * Systems with the TI redriver that loses port status change events |
| * need to have the registers polled during D3, so avoid D3cold. |
| */ |
| if (xhci_compliance_mode_recovery_timer_quirk_check()) |
| pdev->no_d3cold = true; |
| |
| return xhci_suspend(xhci); |
| } |
| |
| static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) |
| { |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| struct pci_dev *pdev = to_pci_dev(hcd->self.controller); |
| int retval = 0; |
| |
| /* The BIOS on systems with the Intel Panther Point chipset may or may |
| * not support xHCI natively. That means that during system resume, it |
| * may switch the ports back to EHCI so that users can use their |
| * keyboard to select a kernel from GRUB after resume from hibernate. |
| * |
| * The BIOS is supposed to remember whether the OS had xHCI ports |
| * enabled before resume, and switch the ports back to xHCI when the |
| * BIOS/OS semaphore is written, but we all know we can't trust BIOS |
| * writers. |
| * |
| * Unconditionally switch the ports back to xHCI after a system resume. |
| * It should not matter whether the EHCI or xHCI controller is |
| * resumed first. It's enough to do the switchover in xHCI because |
| * USB core won't notice anything as the hub driver doesn't start |
| * running again until after all the devices (including both EHCI and |
| * xHCI host controllers) have been resumed. |
| */ |
| |
| if (pdev->vendor == PCI_VENDOR_ID_INTEL) |
| usb_enable_intel_xhci_ports(pdev); |
| |
| retval = xhci_resume(xhci, hibernated); |
| return retval; |
| } |
| #endif /* CONFIG_PM */ |
| |
| static const struct hc_driver xhci_pci_hc_driver = { |
| .description = hcd_name, |
| .product_desc = "xHCI Host Controller", |
| .hcd_priv_size = sizeof(struct xhci_hcd *), |
| |
| /* |
| * generic hardware linkage |
| */ |
| .irq = xhci_irq, |
| .flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED, |
| |
| /* |
| * basic lifecycle operations |
| */ |
| .reset = xhci_pci_setup, |
| .start = xhci_run, |
| #ifdef CONFIG_PM |
| .pci_suspend = xhci_pci_suspend, |
| .pci_resume = xhci_pci_resume, |
| #endif |
| .stop = xhci_stop, |
| .shutdown = xhci_shutdown, |
| |
| /* |
| * managing i/o requests and associated device resources |
| */ |
| .urb_enqueue = xhci_urb_enqueue, |
| .urb_dequeue = xhci_urb_dequeue, |
| .alloc_dev = xhci_alloc_dev, |
| .free_dev = xhci_free_dev, |
| .alloc_streams = xhci_alloc_streams, |
| .free_streams = xhci_free_streams, |
| .add_endpoint = xhci_add_endpoint, |
| .drop_endpoint = xhci_drop_endpoint, |
| .endpoint_reset = xhci_endpoint_reset, |
| .check_bandwidth = xhci_check_bandwidth, |
| .reset_bandwidth = xhci_reset_bandwidth, |
| .address_device = xhci_address_device, |
| .enable_device = xhci_enable_device, |
| .update_hub_device = xhci_update_hub_device, |
| .reset_device = xhci_discover_or_reset_device, |
| |
| /* |
| * scheduling support |
| */ |
| .get_frame_number = xhci_get_frame, |
| |
| /* Root hub support */ |
| .hub_control = xhci_hub_control, |
| .hub_status_data = xhci_hub_status_data, |
| .bus_suspend = xhci_bus_suspend, |
| .bus_resume = xhci_bus_resume, |
| /* |
| * call back when device connected and addressed |
| */ |
| .update_device = xhci_update_device, |
| .set_usb2_hw_lpm = xhci_set_usb2_hardware_lpm, |
| .enable_usb3_lpm_timeout = xhci_enable_usb3_lpm_timeout, |
| .disable_usb3_lpm_timeout = xhci_disable_usb3_lpm_timeout, |
| .find_raw_port_number = xhci_find_raw_port_number, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* PCI driver selection metadata; PCI hotplugging uses this */ |
| static const struct pci_device_id pci_ids[] = { { |
| /* handle any USB 3.0 xHCI controller */ |
| PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0), |
| .driver_data = (unsigned long) &xhci_pci_hc_driver, |
| }, |
| { /* end: all zeroes */ } |
| }; |
| MODULE_DEVICE_TABLE(pci, pci_ids); |
| |
| /* pci driver glue; this is a "new style" PCI driver module */ |
| static struct pci_driver xhci_pci_driver = { |
| .name = (char *) hcd_name, |
| .id_table = pci_ids, |
| |
| .probe = xhci_pci_probe, |
| .remove = xhci_pci_remove, |
| /* suspend and resume implemented later */ |
| |
| .shutdown = usb_hcd_pci_shutdown, |
| #ifdef CONFIG_PM |
| .driver = { |
| .pm = &usb_hcd_pci_pm_ops |
| }, |
| #endif |
| }; |
| |
| int __init xhci_register_pci(void) |
| { |
| return pci_register_driver(&xhci_pci_driver); |
| } |
| |
| void xhci_unregister_pci(void) |
| { |
| pci_unregister_driver(&xhci_pci_driver); |
| } |