| /* |
| * linux/arch/arm/mach-pxa/poodle.c |
| * |
| * Support for the SHARP Poodle Board. |
| * |
| * Based on: |
| * linux/arch/arm/mach-pxa/lubbock.c Author: Nicolas Pitre |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Change Log |
| * 12-Dec-2002 Sharp Corporation for Poodle |
| * John Lenz <lenz@cs.wisc.edu> updates to 2.6 |
| */ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/fb.h> |
| |
| #include <asm/hardware.h> |
| #include <asm/mach-types.h> |
| #include <asm/irq.h> |
| #include <asm/setup.h> |
| |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/irq.h> |
| |
| #include <asm/arch/pxa-regs.h> |
| #include <asm/arch/irq.h> |
| #include <asm/arch/poodle.h> |
| #include <asm/arch/pxafb.h> |
| |
| #include <asm/hardware/scoop.h> |
| #include <asm/hardware/locomo.h> |
| #include <asm/mach/sharpsl_param.h> |
| |
| #include "generic.h" |
| |
| static struct resource poodle_scoop_resources[] = { |
| [0] = { |
| .start = 0x10800000, |
| .end = 0x10800fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct scoop_config poodle_scoop_setup = { |
| .io_dir = POODLE_SCOOP_IO_DIR, |
| .io_out = POODLE_SCOOP_IO_OUT, |
| }; |
| |
| struct platform_device poodle_scoop_device = { |
| .name = "sharp-scoop", |
| .id = -1, |
| .dev = { |
| .platform_data = &poodle_scoop_setup, |
| }, |
| .num_resources = ARRAY_SIZE(poodle_scoop_resources), |
| .resource = poodle_scoop_resources, |
| }; |
| |
| |
| /* LoCoMo device */ |
| static struct resource locomo_resources[] = { |
| [0] = { |
| .start = 0x10000000, |
| .end = 0x10001fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_GPIO(10), |
| .end = IRQ_GPIO(10), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device locomo_device = { |
| .name = "locomo", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(locomo_resources), |
| .resource = locomo_resources, |
| }; |
| |
| /* PXAFB device */ |
| static struct pxafb_mach_info poodle_fb_info __initdata = { |
| .pixclock = 144700, |
| |
| .xres = 320, |
| .yres = 240, |
| .bpp = 16, |
| |
| .hsync_len = 7, |
| .left_margin = 11, |
| .right_margin = 30, |
| |
| .vsync_len = 2, |
| .upper_margin = 2, |
| .lower_margin = 0, |
| .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| |
| .lccr0 = LCCR0_Act | LCCR0_Sngl | LCCR0_Color, |
| .lccr3 = 0, |
| |
| .pxafb_backlight_power = NULL, |
| .pxafb_lcd_power = NULL, |
| }; |
| |
| static struct platform_device *devices[] __initdata = { |
| &locomo_device, |
| &poodle_scoop_device, |
| }; |
| |
| static void __init poodle_init(void) |
| { |
| int ret = 0; |
| |
| /* cpu initialize */ |
| /* Pgsr Register */ |
| PGSR0 = 0x0146dd80; |
| PGSR1 = 0x03bf0890; |
| PGSR2 = 0x0001c000; |
| |
| /* Alternate Register */ |
| GAFR0_L = 0x01001000; |
| GAFR0_U = 0x591a8010; |
| GAFR1_L = 0x900a8451; |
| GAFR1_U = 0xaaa5aaaa; |
| GAFR2_L = 0x8aaaaaaa; |
| GAFR2_U = 0x00000002; |
| |
| /* Direction Register */ |
| GPDR0 = 0xd3f0904c; |
| GPDR1 = 0xfcffb7d3; |
| GPDR2 = 0x0001ffff; |
| |
| /* Output Register */ |
| GPCR0 = 0x00000000; |
| GPCR1 = 0x00000000; |
| GPCR2 = 0x00000000; |
| |
| GPSR0 = 0x00400000; |
| GPSR1 = 0x00000000; |
| GPSR2 = 0x00000000; |
| |
| set_pxa_fb_info(&poodle_fb_info); |
| |
| ret = platform_add_devices(devices, ARRAY_SIZE(devices)); |
| if (ret) { |
| printk(KERN_WARNING "poodle: Unable to register LoCoMo device\n"); |
| } |
| } |
| |
| static void __init fixup_poodle(struct machine_desc *desc, |
| struct tag *tags, char **cmdline, struct meminfo *mi) |
| { |
| sharpsl_save_param(); |
| } |
| |
| static struct map_desc poodle_io_desc[] __initdata = { |
| /* virtual physical length */ |
| { 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */ |
| }; |
| |
| static void __init poodle_map_io(void) |
| { |
| pxa_map_io(); |
| iotable_init(poodle_io_desc, ARRAY_SIZE(poodle_io_desc)); |
| |
| /* setup sleep mode values */ |
| PWER = 0x00000002; |
| PFER = 0x00000000; |
| PRER = 0x00000002; |
| PGSR0 = 0x00008000; |
| PGSR1 = 0x003F0202; |
| PGSR2 = 0x0001C000; |
| PCFR |= PCFR_OPDE; |
| } |
| |
| MACHINE_START(POODLE, "SHARP Poodle") |
| BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) |
| FIXUP(fixup_poodle) |
| MAPIO(poodle_map_io) |
| INITIRQ(pxa_init_irq) |
| .timer = &pxa_timer, |
| .init_machine = poodle_init, |
| MACHINE_END |