| /* |
| * TI/National Semiconductor LP3943 PWM driver |
| * |
| * Copyright 2013 Texas Instruments |
| * |
| * Author: Milo Kim <milo.kim@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/mfd/lp3943.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| #include <linux/slab.h> |
| |
| #define LP3943_MAX_DUTY 255 |
| #define LP3943_MIN_PERIOD 6250 |
| #define LP3943_MAX_PERIOD 1600000 |
| |
| struct lp3943_pwm { |
| struct pwm_chip chip; |
| struct lp3943 *lp3943; |
| struct lp3943_platform_data *pdata; |
| }; |
| |
| static inline struct lp3943_pwm *to_lp3943_pwm(struct pwm_chip *_chip) |
| { |
| return container_of(_chip, struct lp3943_pwm, chip); |
| } |
| |
| static struct lp3943_pwm_map * |
| lp3943_pwm_request_map(struct lp3943_pwm *lp3943_pwm, int hwpwm) |
| { |
| struct lp3943_platform_data *pdata = lp3943_pwm->pdata; |
| struct lp3943 *lp3943 = lp3943_pwm->lp3943; |
| struct lp3943_pwm_map *pwm_map; |
| int i, offset; |
| |
| pwm_map = kzalloc(sizeof(*pwm_map), GFP_KERNEL); |
| if (!pwm_map) |
| return ERR_PTR(-ENOMEM); |
| |
| pwm_map->output = pdata->pwms[hwpwm]->output; |
| pwm_map->num_outputs = pdata->pwms[hwpwm]->num_outputs; |
| |
| for (i = 0; i < pwm_map->num_outputs; i++) { |
| offset = pwm_map->output[i]; |
| |
| /* Return an error if the pin is already assigned */ |
| if (test_and_set_bit(offset, &lp3943->pin_used)) { |
| kfree(pwm_map); |
| return ERR_PTR(-EBUSY); |
| } |
| } |
| |
| return pwm_map; |
| } |
| |
| static int lp3943_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip); |
| struct lp3943_pwm_map *pwm_map; |
| |
| pwm_map = lp3943_pwm_request_map(lp3943_pwm, pwm->hwpwm); |
| if (IS_ERR(pwm_map)) |
| return PTR_ERR(pwm_map); |
| |
| return pwm_set_chip_data(pwm, pwm_map); |
| } |
| |
| static void lp3943_pwm_free_map(struct lp3943_pwm *lp3943_pwm, |
| struct lp3943_pwm_map *pwm_map) |
| { |
| struct lp3943 *lp3943 = lp3943_pwm->lp3943; |
| int i, offset; |
| |
| for (i = 0; i < pwm_map->num_outputs; i++) { |
| offset = pwm_map->output[i]; |
| clear_bit(offset, &lp3943->pin_used); |
| } |
| |
| kfree(pwm_map); |
| } |
| |
| static void lp3943_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip); |
| struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm); |
| |
| lp3943_pwm_free_map(lp3943_pwm, pwm_map); |
| } |
| |
| static int lp3943_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| int duty_ns, int period_ns) |
| { |
| struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip); |
| struct lp3943 *lp3943 = lp3943_pwm->lp3943; |
| u8 val, reg_duty, reg_prescale; |
| int err; |
| |
| /* |
| * How to configure the LP3943 PWMs |
| * |
| * 1) Period = 6250 ~ 1600000 |
| * 2) Prescale = period / 6250 -1 |
| * 3) Duty = input duty |
| * |
| * Prescale and duty are register values |
| */ |
| |
| if (pwm->hwpwm == 0) { |
| reg_prescale = LP3943_REG_PRESCALE0; |
| reg_duty = LP3943_REG_PWM0; |
| } else { |
| reg_prescale = LP3943_REG_PRESCALE1; |
| reg_duty = LP3943_REG_PWM1; |
| } |
| |
| period_ns = clamp(period_ns, LP3943_MIN_PERIOD, LP3943_MAX_PERIOD); |
| val = (u8)(period_ns / LP3943_MIN_PERIOD - 1); |
| |
| err = lp3943_write_byte(lp3943, reg_prescale, val); |
| if (err) |
| return err; |
| |
| val = (u8)(duty_ns * LP3943_MAX_DUTY / period_ns); |
| |
| return lp3943_write_byte(lp3943, reg_duty, val); |
| } |
| |
| static int lp3943_pwm_set_mode(struct lp3943_pwm *lp3943_pwm, |
| struct lp3943_pwm_map *pwm_map, |
| u8 val) |
| { |
| struct lp3943 *lp3943 = lp3943_pwm->lp3943; |
| const struct lp3943_reg_cfg *mux = lp3943->mux_cfg; |
| int i, index, err; |
| |
| for (i = 0; i < pwm_map->num_outputs; i++) { |
| index = pwm_map->output[i]; |
| err = lp3943_update_bits(lp3943, mux[index].reg, |
| mux[index].mask, |
| val << mux[index].shift); |
| if (err) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int lp3943_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip); |
| struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm); |
| u8 val; |
| |
| if (pwm->hwpwm == 0) |
| val = LP3943_DIM_PWM0; |
| else |
| val = LP3943_DIM_PWM1; |
| |
| /* |
| * Each PWM generator is set to control any of outputs of LP3943. |
| * To enable/disable the PWM, these output pins should be configured. |
| */ |
| |
| return lp3943_pwm_set_mode(lp3943_pwm, pwm_map, val); |
| } |
| |
| static void lp3943_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip); |
| struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm); |
| |
| /* |
| * LP3943 outputs are open-drain, so the pin should be configured |
| * when the PWM is disabled. |
| */ |
| |
| lp3943_pwm_set_mode(lp3943_pwm, pwm_map, LP3943_GPIO_OUT_HIGH); |
| } |
| |
| static const struct pwm_ops lp3943_pwm_ops = { |
| .request = lp3943_pwm_request, |
| .free = lp3943_pwm_free, |
| .config = lp3943_pwm_config, |
| .enable = lp3943_pwm_enable, |
| .disable = lp3943_pwm_disable, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int lp3943_pwm_parse_dt(struct device *dev, |
| struct lp3943_pwm *lp3943_pwm) |
| { |
| static const char * const name[] = { "ti,pwm0", "ti,pwm1", }; |
| struct device_node *node = dev->of_node; |
| struct lp3943_platform_data *pdata; |
| struct lp3943_pwm_map *pwm_map; |
| enum lp3943_pwm_output *output; |
| int i, err, proplen, count = 0; |
| u32 num_outputs; |
| |
| if (!node) |
| return -EINVAL; |
| |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return -ENOMEM; |
| |
| /* |
| * Read the output map configuration from the device tree. |
| * Each of the two PWM generators can drive zero or more outputs. |
| */ |
| |
| for (i = 0; i < LP3943_NUM_PWMS; i++) { |
| if (!of_get_property(node, name[i], &proplen)) |
| continue; |
| |
| num_outputs = proplen / sizeof(u32); |
| if (num_outputs == 0) |
| continue; |
| |
| output = devm_kzalloc(dev, sizeof(*output) * num_outputs, |
| GFP_KERNEL); |
| if (!output) |
| return -ENOMEM; |
| |
| err = of_property_read_u32_array(node, name[i], output, |
| num_outputs); |
| if (err) |
| return err; |
| |
| pwm_map = devm_kzalloc(dev, sizeof(*pwm_map), GFP_KERNEL); |
| if (!pwm_map) |
| return -ENOMEM; |
| |
| pwm_map->output = output; |
| pwm_map->num_outputs = num_outputs; |
| pdata->pwms[i] = pwm_map; |
| |
| count++; |
| } |
| |
| if (count == 0) |
| return -ENODATA; |
| |
| lp3943_pwm->pdata = pdata; |
| return 0; |
| } |
| |
| static int lp3943_pwm_probe(struct platform_device *pdev) |
| { |
| struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent); |
| struct lp3943_pwm *lp3943_pwm; |
| int ret; |
| |
| lp3943_pwm = devm_kzalloc(&pdev->dev, sizeof(*lp3943_pwm), GFP_KERNEL); |
| if (!lp3943_pwm) |
| return -ENOMEM; |
| |
| lp3943_pwm->pdata = lp3943->pdata; |
| if (!lp3943_pwm->pdata) { |
| if (IS_ENABLED(CONFIG_OF)) |
| ret = lp3943_pwm_parse_dt(&pdev->dev, lp3943_pwm); |
| else |
| ret = -ENODEV; |
| |
| if (ret) |
| return ret; |
| } |
| |
| lp3943_pwm->lp3943 = lp3943; |
| lp3943_pwm->chip.dev = &pdev->dev; |
| lp3943_pwm->chip.ops = &lp3943_pwm_ops; |
| lp3943_pwm->chip.npwm = LP3943_NUM_PWMS; |
| lp3943_pwm->chip.base = -1; |
| |
| platform_set_drvdata(pdev, lp3943_pwm); |
| |
| return pwmchip_add(&lp3943_pwm->chip); |
| } |
| |
| static int lp3943_pwm_remove(struct platform_device *pdev) |
| { |
| struct lp3943_pwm *lp3943_pwm = platform_get_drvdata(pdev); |
| |
| return pwmchip_remove(&lp3943_pwm->chip); |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id lp3943_pwm_of_match[] = { |
| { .compatible = "ti,lp3943-pwm", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, lp3943_pwm_of_match); |
| #endif |
| |
| static struct platform_driver lp3943_pwm_driver = { |
| .probe = lp3943_pwm_probe, |
| .remove = lp3943_pwm_remove, |
| .driver = { |
| .name = "lp3943-pwm", |
| .of_match_table = of_match_ptr(lp3943_pwm_of_match), |
| }, |
| }; |
| module_platform_driver(lp3943_pwm_driver); |
| |
| MODULE_DESCRIPTION("LP3943 PWM driver"); |
| MODULE_ALIAS("platform:lp3943-pwm"); |
| MODULE_AUTHOR("Milo Kim"); |
| MODULE_LICENSE("GPL"); |