| /* |
| * ASIX AX8817X based USB 2.0 Ethernet Devices |
| * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com> |
| * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net> |
| * Copyright (c) 2002-2003 TiVo Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| // #define DEBUG // error path messages, extra info |
| // #define VERBOSE // more; success messages |
| |
| #include <linux/config.h> |
| #ifdef CONFIG_USB_DEBUG |
| # define DEBUG |
| #endif |
| #include <linux/module.h> |
| #include <linux/kmod.h> |
| #include <linux/sched.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/workqueue.h> |
| #include <linux/mii.h> |
| #include <linux/usb.h> |
| #include <linux/crc32.h> |
| |
| #include "usbnet.h" |
| |
| |
| /* ASIX AX8817X based USB 2.0 Ethernet Devices */ |
| |
| #define AX_CMD_SET_SW_MII 0x06 |
| #define AX_CMD_READ_MII_REG 0x07 |
| #define AX_CMD_WRITE_MII_REG 0x08 |
| #define AX_CMD_SET_HW_MII 0x0a |
| #define AX_CMD_READ_EEPROM 0x0b |
| #define AX_CMD_WRITE_EEPROM 0x0c |
| #define AX_CMD_WRITE_ENABLE 0x0d |
| #define AX_CMD_WRITE_DISABLE 0x0e |
| #define AX_CMD_WRITE_RX_CTL 0x10 |
| #define AX_CMD_READ_IPG012 0x11 |
| #define AX_CMD_WRITE_IPG0 0x12 |
| #define AX_CMD_WRITE_IPG1 0x13 |
| #define AX_CMD_WRITE_IPG2 0x14 |
| #define AX_CMD_WRITE_MULTI_FILTER 0x16 |
| #define AX_CMD_READ_NODE_ID 0x17 |
| #define AX_CMD_READ_PHY_ID 0x19 |
| #define AX_CMD_READ_MEDIUM_STATUS 0x1a |
| #define AX_CMD_WRITE_MEDIUM_MODE 0x1b |
| #define AX_CMD_READ_MONITOR_MODE 0x1c |
| #define AX_CMD_WRITE_MONITOR_MODE 0x1d |
| #define AX_CMD_WRITE_GPIOS 0x1f |
| #define AX_CMD_SW_RESET 0x20 |
| #define AX_CMD_SW_PHY_STATUS 0x21 |
| #define AX_CMD_SW_PHY_SELECT 0x22 |
| #define AX88772_CMD_READ_NODE_ID 0x13 |
| |
| #define AX_MONITOR_MODE 0x01 |
| #define AX_MONITOR_LINK 0x02 |
| #define AX_MONITOR_MAGIC 0x04 |
| #define AX_MONITOR_HSFS 0x10 |
| |
| /* AX88172 Medium Status Register values */ |
| #define AX_MEDIUM_FULL_DUPLEX 0x02 |
| #define AX_MEDIUM_TX_ABORT_ALLOW 0x04 |
| #define AX_MEDIUM_FLOW_CONTROL_EN 0x10 |
| |
| #define AX_MCAST_FILTER_SIZE 8 |
| #define AX_MAX_MCAST 64 |
| |
| #define AX_EEPROM_LEN 0x40 |
| |
| #define AX_SWRESET_CLEAR 0x00 |
| #define AX_SWRESET_RR 0x01 |
| #define AX_SWRESET_RT 0x02 |
| #define AX_SWRESET_PRTE 0x04 |
| #define AX_SWRESET_PRL 0x08 |
| #define AX_SWRESET_BZ 0x10 |
| #define AX_SWRESET_IPRL 0x20 |
| #define AX_SWRESET_IPPD 0x40 |
| |
| #define AX88772_IPG0_DEFAULT 0x15 |
| #define AX88772_IPG1_DEFAULT 0x0c |
| #define AX88772_IPG2_DEFAULT 0x12 |
| |
| #define AX88772_MEDIUM_FULL_DUPLEX 0x0002 |
| #define AX88772_MEDIUM_RESERVED 0x0004 |
| #define AX88772_MEDIUM_RX_FC_ENABLE 0x0010 |
| #define AX88772_MEDIUM_TX_FC_ENABLE 0x0020 |
| #define AX88772_MEDIUM_PAUSE_FORMAT 0x0080 |
| #define AX88772_MEDIUM_RX_ENABLE 0x0100 |
| #define AX88772_MEDIUM_100MB 0x0200 |
| #define AX88772_MEDIUM_DEFAULT \ |
| (AX88772_MEDIUM_FULL_DUPLEX | AX88772_MEDIUM_RX_FC_ENABLE | \ |
| AX88772_MEDIUM_TX_FC_ENABLE | AX88772_MEDIUM_100MB | \ |
| AX88772_MEDIUM_RESERVED | AX88772_MEDIUM_RX_ENABLE ) |
| |
| #define AX_EEPROM_MAGIC 0xdeadbeef |
| |
| /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ |
| struct ax8817x_data { |
| u8 multi_filter[AX_MCAST_FILTER_SIZE]; |
| }; |
| |
| struct ax88172_int_data { |
| u16 res1; |
| u8 link; |
| u16 res2; |
| u8 status; |
| u16 res3; |
| } __attribute__ ((packed)); |
| |
| static int ax8817x_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, |
| u16 size, void *data) |
| { |
| return usb_control_msg( |
| dev->udev, |
| usb_rcvctrlpipe(dev->udev, 0), |
| cmd, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, |
| index, |
| data, |
| size, |
| USB_CTRL_GET_TIMEOUT); |
| } |
| |
| static int ax8817x_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, |
| u16 size, void *data) |
| { |
| return usb_control_msg( |
| dev->udev, |
| usb_sndctrlpipe(dev->udev, 0), |
| cmd, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, |
| index, |
| data, |
| size, |
| USB_CTRL_SET_TIMEOUT); |
| } |
| |
| static void ax8817x_async_cmd_callback(struct urb *urb, struct pt_regs *regs) |
| { |
| struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context; |
| |
| if (urb->status < 0) |
| printk(KERN_DEBUG "ax8817x_async_cmd_callback() failed with %d", |
| urb->status); |
| |
| kfree(req); |
| usb_free_urb(urb); |
| } |
| |
| static void ax8817x_status(struct usbnet *dev, struct urb *urb) |
| { |
| struct ax88172_int_data *event; |
| int link; |
| |
| if (urb->actual_length < 8) |
| return; |
| |
| event = urb->transfer_buffer; |
| link = event->link & 0x01; |
| if (netif_carrier_ok(dev->net) != link) { |
| if (link) { |
| netif_carrier_on(dev->net); |
| usbnet_defer_kevent (dev, EVENT_LINK_RESET ); |
| } else |
| netif_carrier_off(dev->net); |
| devdbg(dev, "ax8817x - Link Status is: %d", link); |
| } |
| } |
| |
| static void |
| ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, |
| u16 size, void *data) |
| { |
| struct usb_ctrlrequest *req; |
| int status; |
| struct urb *urb; |
| |
| if ((urb = usb_alloc_urb(0, GFP_ATOMIC)) == NULL) { |
| devdbg(dev, "Error allocating URB in write_cmd_async!"); |
| return; |
| } |
| |
| if ((req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC)) == NULL) { |
| deverr(dev, "Failed to allocate memory for control request"); |
| usb_free_urb(urb); |
| return; |
| } |
| |
| req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; |
| req->bRequest = cmd; |
| req->wValue = cpu_to_le16(value); |
| req->wIndex = cpu_to_le16(index); |
| req->wLength = cpu_to_le16(size); |
| |
| usb_fill_control_urb(urb, dev->udev, |
| usb_sndctrlpipe(dev->udev, 0), |
| (void *)req, data, size, |
| ax8817x_async_cmd_callback, req); |
| |
| if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) { |
| deverr(dev, "Error submitting the control message: status=%d", |
| status); |
| kfree(req); |
| usb_free_urb(urb); |
| } |
| } |
| |
| static void ax8817x_set_multicast(struct net_device *net) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| struct ax8817x_data *data = (struct ax8817x_data *)&dev->data; |
| u8 rx_ctl = 0x8c; |
| |
| if (net->flags & IFF_PROMISC) { |
| rx_ctl |= 0x01; |
| } else if (net->flags & IFF_ALLMULTI |
| || net->mc_count > AX_MAX_MCAST) { |
| rx_ctl |= 0x02; |
| } else if (net->mc_count == 0) { |
| /* just broadcast and directed */ |
| } else { |
| /* We use the 20 byte dev->data |
| * for our 8 byte filter buffer |
| * to avoid allocating memory that |
| * is tricky to free later */ |
| struct dev_mc_list *mc_list = net->mc_list; |
| u32 crc_bits; |
| int i; |
| |
| memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE); |
| |
| /* Build the multicast hash filter. */ |
| for (i = 0; i < net->mc_count; i++) { |
| crc_bits = |
| ether_crc(ETH_ALEN, |
| mc_list->dmi_addr) >> 26; |
| data->multi_filter[crc_bits >> 3] |= |
| 1 << (crc_bits & 7); |
| mc_list = mc_list->next; |
| } |
| |
| ax8817x_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0, |
| AX_MCAST_FILTER_SIZE, data->multi_filter); |
| |
| rx_ctl |= 0x10; |
| } |
| |
| ax8817x_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); |
| } |
| |
| static int ax8817x_mdio_read(struct net_device *netdev, int phy_id, int loc) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| u16 res; |
| u8 buf[1]; |
| |
| ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf); |
| ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, |
| (__u16)loc, 2, (u16 *)&res); |
| ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf); |
| |
| return res & 0xffff; |
| } |
| |
| /* same as above, but converts resulting value to cpu byte order */ |
| static int ax8817x_mdio_read_le(struct net_device *netdev, int phy_id, int loc) |
| { |
| return le16_to_cpu(ax8817x_mdio_read(netdev,phy_id, loc)); |
| } |
| |
| static void |
| ax8817x_mdio_write(struct net_device *netdev, int phy_id, int loc, int val) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| u16 res = val; |
| u8 buf[1]; |
| |
| ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf); |
| ax8817x_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, |
| (__u16)loc, 2, (u16 *)&res); |
| ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf); |
| } |
| |
| /* same as above, but converts new value to le16 byte order before writing */ |
| static void |
| ax8817x_mdio_write_le(struct net_device *netdev, int phy_id, int loc, int val) |
| { |
| ax8817x_mdio_write( netdev, phy_id, loc, cpu_to_le16(val) ); |
| } |
| |
| static int ax88172_link_reset(struct usbnet *dev) |
| { |
| u16 lpa; |
| u16 adv; |
| u16 res; |
| u8 mode; |
| |
| mode = AX_MEDIUM_TX_ABORT_ALLOW | AX_MEDIUM_FLOW_CONTROL_EN; |
| lpa = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA); |
| adv = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE); |
| res = mii_nway_result(lpa|adv); |
| if (res & LPA_DUPLEX) |
| mode |= AX_MEDIUM_FULL_DUPLEX; |
| ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); |
| |
| return 0; |
| } |
| |
| static void |
| ax8817x_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| u8 opt; |
| |
| if (ax8817x_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) { |
| wolinfo->supported = 0; |
| wolinfo->wolopts = 0; |
| return; |
| } |
| wolinfo->supported = WAKE_PHY | WAKE_MAGIC; |
| wolinfo->wolopts = 0; |
| if (opt & AX_MONITOR_MODE) { |
| if (opt & AX_MONITOR_LINK) |
| wolinfo->wolopts |= WAKE_PHY; |
| if (opt & AX_MONITOR_MAGIC) |
| wolinfo->wolopts |= WAKE_MAGIC; |
| } |
| } |
| |
| static int |
| ax8817x_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| u8 opt = 0; |
| u8 buf[1]; |
| |
| if (wolinfo->wolopts & WAKE_PHY) |
| opt |= AX_MONITOR_LINK; |
| if (wolinfo->wolopts & WAKE_MAGIC) |
| opt |= AX_MONITOR_MAGIC; |
| if (opt != 0) |
| opt |= AX_MONITOR_MODE; |
| |
| if (ax8817x_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE, |
| opt, 0, 0, &buf) < 0) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int ax8817x_get_eeprom_len(struct net_device *net) |
| { |
| return AX_EEPROM_LEN; |
| } |
| |
| static int ax8817x_get_eeprom(struct net_device *net, |
| struct ethtool_eeprom *eeprom, u8 *data) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| u16 *ebuf = (u16 *)data; |
| int i; |
| |
| /* Crude hack to ensure that we don't overwrite memory |
| * if an odd length is supplied |
| */ |
| if (eeprom->len % 2) |
| return -EINVAL; |
| |
| eeprom->magic = AX_EEPROM_MAGIC; |
| |
| /* ax8817x returns 2 bytes from eeprom on read */ |
| for (i=0; i < eeprom->len / 2; i++) { |
| if (ax8817x_read_cmd(dev, AX_CMD_READ_EEPROM, |
| eeprom->offset + i, 0, 2, &ebuf[i]) < 0) |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static void ax8817x_get_drvinfo (struct net_device *net, |
| struct ethtool_drvinfo *info) |
| { |
| /* Inherit standard device info */ |
| usbnet_get_drvinfo(net, info); |
| info->eedump_len = 0x3e; |
| } |
| |
| static int ax8817x_get_settings(struct net_device *net, struct ethtool_cmd *cmd) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| |
| return mii_ethtool_gset(&dev->mii,cmd); |
| } |
| |
| static int ax8817x_set_settings(struct net_device *net, struct ethtool_cmd *cmd) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| |
| return mii_ethtool_sset(&dev->mii,cmd); |
| } |
| |
| /* We need to override some ethtool_ops so we require our |
| own structure so we don't interfere with other usbnet |
| devices that may be connected at the same time. */ |
| static struct ethtool_ops ax8817x_ethtool_ops = { |
| .get_drvinfo = ax8817x_get_drvinfo, |
| .get_link = ethtool_op_get_link, |
| .get_msglevel = usbnet_get_msglevel, |
| .set_msglevel = usbnet_set_msglevel, |
| .get_wol = ax8817x_get_wol, |
| .set_wol = ax8817x_set_wol, |
| .get_eeprom_len = ax8817x_get_eeprom_len, |
| .get_eeprom = ax8817x_get_eeprom, |
| .get_settings = ax8817x_get_settings, |
| .set_settings = ax8817x_set_settings, |
| }; |
| |
| static int ax8817x_ioctl (struct net_device *net, struct ifreq *rq, int cmd) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| |
| return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); |
| } |
| |
| static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| int ret = 0; |
| void *buf; |
| int i; |
| unsigned long gpio_bits = dev->driver_info->data; |
| |
| usbnet_get_endpoints(dev,intf); |
| |
| buf = kmalloc(ETH_ALEN, GFP_KERNEL); |
| if(!buf) { |
| ret = -ENOMEM; |
| goto out1; |
| } |
| |
| /* Toggle the GPIOs in a manufacturer/model specific way */ |
| for (i = 2; i >= 0; i--) { |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS, |
| (gpio_bits >> (i * 8)) & 0xff, 0, 0, |
| buf)) < 0) |
| goto out2; |
| msleep(5); |
| } |
| |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, |
| 0x80, 0, 0, buf)) < 0) { |
| dbg("send AX_CMD_WRITE_RX_CTL failed: %d", ret); |
| goto out2; |
| } |
| |
| /* Get the MAC address */ |
| memset(buf, 0, ETH_ALEN); |
| if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_NODE_ID, |
| 0, 0, 6, buf)) < 0) { |
| dbg("read AX_CMD_READ_NODE_ID failed: %d", ret); |
| goto out2; |
| } |
| memcpy(dev->net->dev_addr, buf, ETH_ALEN); |
| |
| /* Get the PHY id */ |
| if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID, |
| 0, 0, 2, buf)) < 0) { |
| dbg("error on read AX_CMD_READ_PHY_ID: %02x", ret); |
| goto out2; |
| } else if (ret < 2) { |
| /* this should always return 2 bytes */ |
| dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x", |
| ret); |
| ret = -EIO; |
| goto out2; |
| } |
| |
| /* Initialize MII structure */ |
| dev->mii.dev = dev->net; |
| dev->mii.mdio_read = ax8817x_mdio_read; |
| dev->mii.mdio_write = ax8817x_mdio_write; |
| dev->mii.phy_id_mask = 0x3f; |
| dev->mii.reg_num_mask = 0x1f; |
| dev->mii.phy_id = *((u8 *)buf + 1); |
| dev->net->do_ioctl = ax8817x_ioctl; |
| |
| dev->net->set_multicast_list = ax8817x_set_multicast; |
| dev->net->ethtool_ops = &ax8817x_ethtool_ops; |
| |
| ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); |
| ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE, |
| ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); |
| mii_nway_restart(&dev->mii); |
| |
| return 0; |
| out2: |
| kfree(buf); |
| out1: |
| return ret; |
| } |
| |
| static struct ethtool_ops ax88772_ethtool_ops = { |
| .get_drvinfo = ax8817x_get_drvinfo, |
| .get_link = ethtool_op_get_link, |
| .get_msglevel = usbnet_get_msglevel, |
| .set_msglevel = usbnet_set_msglevel, |
| .get_wol = ax8817x_get_wol, |
| .set_wol = ax8817x_set_wol, |
| .get_eeprom_len = ax8817x_get_eeprom_len, |
| .get_eeprom = ax8817x_get_eeprom, |
| .get_settings = ax8817x_get_settings, |
| .set_settings = ax8817x_set_settings, |
| }; |
| |
| static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| int ret; |
| void *buf; |
| |
| usbnet_get_endpoints(dev,intf); |
| |
| buf = kmalloc(6, GFP_KERNEL); |
| if(!buf) { |
| dbg ("Cannot allocate memory for buffer"); |
| ret = -ENOMEM; |
| goto out1; |
| } |
| |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS, |
| 0x00B0, 0, 0, buf)) < 0) |
| goto out2; |
| |
| msleep(5); |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_PHY_SELECT, |
| 0x0001, 0, 0, buf)) < 0) { |
| dbg("Select PHY #1 failed: %d", ret); |
| goto out2; |
| } |
| |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPPD, |
| 0, 0, buf)) < 0) { |
| dbg("Failed to power down internal PHY: %d", ret); |
| goto out2; |
| } |
| |
| msleep(150); |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_CLEAR, |
| 0, 0, buf)) < 0) { |
| dbg("Failed to perform software reset: %d", ret); |
| goto out2; |
| } |
| |
| msleep(150); |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, |
| AX_SWRESET_IPRL | AX_SWRESET_PRL, |
| 0, 0, buf)) < 0) { |
| dbg("Failed to set Internal/External PHY reset control: %d", |
| ret); |
| goto out2; |
| } |
| |
| msleep(150); |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, |
| 0x0000, 0, 0, buf)) < 0) { |
| dbg("Failed to reset RX_CTL: %d", ret); |
| goto out2; |
| } |
| |
| /* Get the MAC address */ |
| memset(buf, 0, ETH_ALEN); |
| if ((ret = ax8817x_read_cmd(dev, AX88772_CMD_READ_NODE_ID, |
| 0, 0, ETH_ALEN, buf)) < 0) { |
| dbg("Failed to read MAC address: %d", ret); |
| goto out2; |
| } |
| memcpy(dev->net->dev_addr, buf, ETH_ALEN); |
| |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, |
| 0, 0, 0, buf)) < 0) { |
| dbg("Enabling software MII failed: %d", ret); |
| goto out2; |
| } |
| |
| if (((ret = ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, |
| 0x0010, 2, 2, buf)) < 0) |
| || (*((u16 *)buf) != 0x003b)) { |
| dbg("Read PHY register 2 must be 0x3b00: %d", ret); |
| goto out2; |
| } |
| |
| /* Initialize MII structure */ |
| dev->mii.dev = dev->net; |
| dev->mii.mdio_read = ax8817x_mdio_read; |
| dev->mii.mdio_write = ax8817x_mdio_write; |
| dev->mii.phy_id_mask = 0xff; |
| dev->mii.reg_num_mask = 0xff; |
| dev->net->do_ioctl = ax8817x_ioctl; |
| |
| /* Get the PHY id */ |
| if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID, |
| 0, 0, 2, buf)) < 0) { |
| dbg("Error reading PHY ID: %02x", ret); |
| goto out2; |
| } else if (ret < 2) { |
| /* this should always return 2 bytes */ |
| dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x", |
| ret); |
| ret = -EIO; |
| goto out2; |
| } |
| dev->mii.phy_id = *((u8 *)buf + 1); |
| |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_PRL, |
| 0, 0, buf)) < 0) { |
| dbg("Set external PHY reset pin level: %d", ret); |
| goto out2; |
| } |
| msleep(150); |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, |
| AX_SWRESET_IPRL | AX_SWRESET_PRL, |
| 0, 0, buf)) < 0) { |
| dbg("Set Internal/External PHY reset control: %d", ret); |
| goto out2; |
| } |
| msleep(150); |
| |
| |
| dev->net->set_multicast_list = ax8817x_set_multicast; |
| dev->net->ethtool_ops = &ax88772_ethtool_ops; |
| |
| ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); |
| ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE, |
| ADVERTISE_ALL | ADVERTISE_CSMA); |
| mii_nway_restart(&dev->mii); |
| |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, |
| AX88772_MEDIUM_DEFAULT, 0, 0, buf)) < 0) { |
| dbg("Write medium mode register: %d", ret); |
| goto out2; |
| } |
| |
| if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_IPG0, |
| AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, |
| AX88772_IPG2_DEFAULT, 0, buf)) < 0) { |
| dbg("Write IPG,IPG1,IPG2 failed: %d", ret); |
| goto out2; |
| } |
| if ((ret = |
| ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf)) < 0) { |
| dbg("Failed to set hardware MII: %02x", ret); |
| goto out2; |
| } |
| |
| /* Set RX_CTL to default values with 2k buffer, and enable cactus */ |
| if ((ret = |
| ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0088, 0, 0, |
| buf)) < 0) { |
| dbg("Reset RX_CTL failed: %d", ret); |
| goto out2; |
| } |
| |
| kfree(buf); |
| |
| /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ |
| if (dev->driver_info->flags & FLAG_FRAMING_AX) { |
| /* hard_mtu is still the default - the device does not support |
| jumbo eth frames */ |
| dev->rx_urb_size = 2048; |
| } |
| |
| return 0; |
| |
| out2: |
| kfree(buf); |
| out1: |
| return ret; |
| } |
| |
| static int ax88772_rx_fixup(struct usbnet *dev, struct sk_buff *skb) |
| { |
| u8 *head; |
| u32 header; |
| char *packet; |
| struct sk_buff *ax_skb; |
| u16 size; |
| |
| head = (u8 *) skb->data; |
| memcpy(&header, head, sizeof(header)); |
| le32_to_cpus(&header); |
| packet = head + sizeof(header); |
| |
| skb_pull(skb, 4); |
| |
| while (skb->len > 0) { |
| if ((short)(header & 0x0000ffff) != |
| ~((short)((header & 0xffff0000) >> 16))) { |
| devdbg(dev,"header length data is error"); |
| } |
| /* get the packet length */ |
| size = (u16) (header & 0x0000ffff); |
| |
| if ((skb->len) - ((size + 1) & 0xfffe) == 0) |
| return 2; |
| if (size > ETH_FRAME_LEN) { |
| devdbg(dev,"invalid rx length %d", size); |
| return 0; |
| } |
| ax_skb = skb_clone(skb, GFP_ATOMIC); |
| if (ax_skb) { |
| ax_skb->len = size; |
| ax_skb->data = packet; |
| ax_skb->tail = packet + size; |
| usbnet_skb_return(dev, ax_skb); |
| } else { |
| return 0; |
| } |
| |
| skb_pull(skb, (size + 1) & 0xfffe); |
| |
| if (skb->len == 0) |
| break; |
| |
| head = (u8 *) skb->data; |
| memcpy(&header, head, sizeof(header)); |
| le32_to_cpus(&header); |
| packet = head + sizeof(header); |
| skb_pull(skb, 4); |
| } |
| |
| if (skb->len < 0) { |
| devdbg(dev,"invalid rx length %d", skb->len); |
| return 0; |
| } |
| return 1; |
| } |
| |
| static struct sk_buff *ax88772_tx_fixup(struct usbnet *dev, struct sk_buff *skb, |
| gfp_t flags) |
| { |
| int padlen; |
| int headroom = skb_headroom(skb); |
| int tailroom = skb_tailroom(skb); |
| u32 packet_len; |
| u32 padbytes = 0xffff0000; |
| |
| padlen = ((skb->len + 4) % 512) ? 0 : 4; |
| |
| if ((!skb_cloned(skb)) |
| && ((headroom + tailroom) >= (4 + padlen))) { |
| if ((headroom < 4) || (tailroom < padlen)) { |
| skb->data = memmove(skb->head + 4, skb->data, skb->len); |
| skb->tail = skb->data + skb->len; |
| } |
| } else { |
| struct sk_buff *skb2; |
| skb2 = skb_copy_expand(skb, 4, padlen, flags); |
| dev_kfree_skb_any(skb); |
| skb = skb2; |
| if (!skb) |
| return NULL; |
| } |
| |
| skb_push(skb, 4); |
| packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4); |
| memcpy(skb->data, &packet_len, sizeof(packet_len)); |
| |
| if ((skb->len % 512) == 0) { |
| memcpy( skb->tail, &padbytes, sizeof(padbytes)); |
| skb_put(skb, sizeof(padbytes)); |
| } |
| return skb; |
| } |
| |
| static int ax88772_link_reset(struct usbnet *dev) |
| { |
| u16 lpa; |
| u16 adv; |
| u16 res; |
| u16 mode; |
| |
| mode = AX88772_MEDIUM_DEFAULT; |
| lpa = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA); |
| adv = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE); |
| res = mii_nway_result(lpa|adv); |
| |
| if ((res & LPA_DUPLEX) == 0) |
| mode &= ~AX88772_MEDIUM_FULL_DUPLEX; |
| if ((res & LPA_100) == 0) |
| mode &= ~AX88772_MEDIUM_100MB; |
| ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); |
| |
| return 0; |
| } |
| |
| static const struct driver_info ax8817x_info = { |
| .description = "ASIX AX8817x USB 2.0 Ethernet", |
| .bind = ax8817x_bind, |
| .status = ax8817x_status, |
| .link_reset = ax88172_link_reset, |
| .reset = ax88172_link_reset, |
| .flags = FLAG_ETHER, |
| .data = 0x00130103, |
| }; |
| |
| static const struct driver_info dlink_dub_e100_info = { |
| .description = "DLink DUB-E100 USB Ethernet", |
| .bind = ax8817x_bind, |
| .status = ax8817x_status, |
| .link_reset = ax88172_link_reset, |
| .reset = ax88172_link_reset, |
| .flags = FLAG_ETHER, |
| .data = 0x009f9d9f, |
| }; |
| |
| static const struct driver_info netgear_fa120_info = { |
| .description = "Netgear FA-120 USB Ethernet", |
| .bind = ax8817x_bind, |
| .status = ax8817x_status, |
| .link_reset = ax88172_link_reset, |
| .reset = ax88172_link_reset, |
| .flags = FLAG_ETHER, |
| .data = 0x00130103, |
| }; |
| |
| static const struct driver_info hawking_uf200_info = { |
| .description = "Hawking UF200 USB Ethernet", |
| .bind = ax8817x_bind, |
| .status = ax8817x_status, |
| .link_reset = ax88172_link_reset, |
| .reset = ax88172_link_reset, |
| .flags = FLAG_ETHER, |
| .data = 0x001f1d1f, |
| }; |
| |
| static const struct driver_info ax88772_info = { |
| .description = "ASIX AX88772 USB 2.0 Ethernet", |
| .bind = ax88772_bind, |
| .status = ax8817x_status, |
| .link_reset = ax88772_link_reset, |
| .reset = ax88772_link_reset, |
| .flags = FLAG_ETHER | FLAG_FRAMING_AX, |
| .rx_fixup = ax88772_rx_fixup, |
| .tx_fixup = ax88772_tx_fixup, |
| .data = 0x00130103, |
| }; |
| |
| static const struct usb_device_id products [] = { |
| { |
| // Linksys USB200M |
| USB_DEVICE (0x077b, 0x2226), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // Netgear FA120 |
| USB_DEVICE (0x0846, 0x1040), |
| .driver_info = (unsigned long) &netgear_fa120_info, |
| }, { |
| // DLink DUB-E100 |
| USB_DEVICE (0x2001, 0x1a00), |
| .driver_info = (unsigned long) &dlink_dub_e100_info, |
| }, { |
| // Intellinet, ST Lab USB Ethernet |
| USB_DEVICE (0x0b95, 0x1720), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // Hawking UF200, TrendNet TU2-ET100 |
| USB_DEVICE (0x07b8, 0x420a), |
| .driver_info = (unsigned long) &hawking_uf200_info, |
| }, { |
| // Billionton Systems, USB2AR |
| USB_DEVICE (0x08dd, 0x90ff), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // ATEN UC210T |
| USB_DEVICE (0x0557, 0x2009), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // Buffalo LUA-U2-KTX |
| USB_DEVICE (0x0411, 0x003d), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter" |
| USB_DEVICE (0x6189, 0x182d), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // corega FEther USB2-TX |
| USB_DEVICE (0x07aa, 0x0017), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // Surecom EP-1427X-2 |
| USB_DEVICE (0x1189, 0x0893), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // goodway corp usb gwusb2e |
| USB_DEVICE (0x1631, 0x6200), |
| .driver_info = (unsigned long) &ax8817x_info, |
| }, { |
| // ASIX AX88772 10/100 |
| USB_DEVICE (0x0b95, 0x7720), |
| .driver_info = (unsigned long) &ax88772_info, |
| }, |
| { }, // END |
| }; |
| MODULE_DEVICE_TABLE(usb, products); |
| |
| static struct usb_driver asix_driver = { |
| .owner = THIS_MODULE, |
| .name = "asix", |
| .id_table = products, |
| .probe = usbnet_probe, |
| .suspend = usbnet_suspend, |
| .resume = usbnet_resume, |
| .disconnect = usbnet_disconnect, |
| }; |
| |
| static int __init asix_init(void) |
| { |
| return usb_register(&asix_driver); |
| } |
| module_init(asix_init); |
| |
| static void __exit asix_exit(void) |
| { |
| usb_deregister(&asix_driver); |
| } |
| module_exit(asix_exit); |
| |
| MODULE_AUTHOR("David Hollis"); |
| MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices"); |
| MODULE_LICENSE("GPL"); |
| |