blob: ad92d8f0add1972bd185506775e8c354cdb65b18 [file] [log] [blame]
/*
* intel_quark_dts_thermal.c
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* Contact Information:
* Ong Boon Leong <boon.leong.ong@intel.com>
* Intel Malaysia, Penang
*
* BSD LICENSE
*
* Copyright(c) 2015 Intel Corporation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Quark DTS thermal driver is implemented by referencing
* intel_soc_dts_thermal.c.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/thermal.h>
#include <asm/cpu_device_id.h>
#include <asm/iosf_mbi.h>
#define X86_FAMILY_QUARK 0x5
#define X86_MODEL_QUARK_X1000 0x9
/* DTS reset is programmed via QRK_MBI_UNIT_SOC */
#define QRK_DTS_REG_OFFSET_RESET 0x34
#define QRK_DTS_RESET_BIT BIT(0)
/* DTS enable is programmed via QRK_MBI_UNIT_RMU */
#define QRK_DTS_REG_OFFSET_ENABLE 0xB0
#define QRK_DTS_ENABLE_BIT BIT(15)
/* Temperature Register is read via QRK_MBI_UNIT_RMU */
#define QRK_DTS_REG_OFFSET_TEMP 0xB1
#define QRK_DTS_MASK_TEMP 0xFF
#define QRK_DTS_OFFSET_TEMP 0
#define QRK_DTS_OFFSET_REL_TEMP 16
#define QRK_DTS_TEMP_BASE 50
/* Programmable Trip Point Register is configured via QRK_MBI_UNIT_RMU */
#define QRK_DTS_REG_OFFSET_PTPS 0xB2
#define QRK_DTS_MASK_TP_THRES 0xFF
#define QRK_DTS_SHIFT_TP 8
#define QRK_DTS_ID_TP_CRITICAL 0
#define QRK_DTS_SAFE_TP_THRES 105
/* Thermal Sensor Register Lock */
#define QRK_DTS_REG_OFFSET_LOCK 0x71
#define QRK_DTS_LOCK_BIT BIT(5)
/* Quark DTS has 2 trip points: hot & catastrophic */
#define QRK_MAX_DTS_TRIPS 2
/* If DTS not locked, all trip points are configurable */
#define QRK_DTS_WR_MASK_SET 0x3
/* If DTS locked, all trip points are not configurable */
#define QRK_DTS_WR_MASK_CLR 0
#define DEFAULT_POLL_DELAY 2000
struct soc_sensor_entry {
bool locked;
u32 store_ptps;
u32 store_dts_enable;
enum thermal_device_mode mode;
struct thermal_zone_device *tzone;
};
static struct soc_sensor_entry *soc_dts;
static int polling_delay = DEFAULT_POLL_DELAY;
module_param(polling_delay, int, 0644);
MODULE_PARM_DESC(polling_delay,
"Polling interval for checking trip points (in milliseconds)");
static DEFINE_MUTEX(dts_update_mutex);
static int soc_dts_enable(struct thermal_zone_device *tzd)
{
u32 out;
struct soc_sensor_entry *aux_entry = tzd->devdata;
int ret;
ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
QRK_DTS_REG_OFFSET_ENABLE, &out);
if (ret)
return ret;
if (out & QRK_DTS_ENABLE_BIT) {
aux_entry->mode = THERMAL_DEVICE_ENABLED;
return 0;
}
if (!aux_entry->locked) {
out |= QRK_DTS_ENABLE_BIT;
ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
QRK_DTS_REG_OFFSET_ENABLE, out);
if (ret)
return ret;
aux_entry->mode = THERMAL_DEVICE_ENABLED;
} else {
aux_entry->mode = THERMAL_DEVICE_DISABLED;
pr_info("DTS is locked. Cannot enable DTS\n");
ret = -EPERM;
}
return ret;
}
static int soc_dts_disable(struct thermal_zone_device *tzd)
{
u32 out;
struct soc_sensor_entry *aux_entry = tzd->devdata;
int ret;
ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
QRK_DTS_REG_OFFSET_ENABLE, &out);
if (ret)
return ret;
if (!(out & QRK_DTS_ENABLE_BIT)) {
aux_entry->mode = THERMAL_DEVICE_DISABLED;
return 0;
}
if (!aux_entry->locked) {
out &= ~QRK_DTS_ENABLE_BIT;
ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
QRK_DTS_REG_OFFSET_ENABLE, out);
if (ret)
return ret;
aux_entry->mode = THERMAL_DEVICE_DISABLED;
} else {
aux_entry->mode = THERMAL_DEVICE_ENABLED;
pr_info("DTS is locked. Cannot disable DTS\n");
ret = -EPERM;
}
return ret;
}
static int _get_trip_temp(int trip, int *temp)
{
int status;
u32 out;
mutex_lock(&dts_update_mutex);
status = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
QRK_DTS_REG_OFFSET_PTPS, &out);
mutex_unlock(&dts_update_mutex);
if (status)
return status;
/*
* Thermal Sensor Programmable Trip Point Register has 8-bit
* fields for critical (catastrophic) and hot set trip point
* thresholds. The threshold value is always offset by its
* temperature base (50 degree Celsius).
*/
*temp = (out >> (trip * QRK_DTS_SHIFT_TP)) & QRK_DTS_MASK_TP_THRES;
*temp -= QRK_DTS_TEMP_BASE;
return 0;
}
static inline int sys_get_trip_temp(struct thermal_zone_device *tzd,
int trip, int *temp)
{
return _get_trip_temp(trip, temp);
}
static inline int sys_get_crit_temp(struct thermal_zone_device *tzd, int *temp)
{
return _get_trip_temp(QRK_DTS_ID_TP_CRITICAL, temp);
}
static int update_trip_temp(struct soc_sensor_entry *aux_entry,
int trip, int temp)
{
u32 out;
u32 temp_out;
u32 store_ptps;
int ret;
mutex_lock(&dts_update_mutex);
if (aux_entry->locked) {
ret = -EPERM;
goto failed;
}
ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
QRK_DTS_REG_OFFSET_PTPS, &store_ptps);
if (ret)
goto failed;
/*
* Protection against unsafe trip point thresdhold value.
* As Quark X1000 data-sheet does not provide any recommendation
* regarding the safe trip point threshold value to use, we choose
* the safe value according to the threshold value set by UEFI BIOS.
*/
if (temp > QRK_DTS_SAFE_TP_THRES)
temp = QRK_DTS_SAFE_TP_THRES;
/*
* Thermal Sensor Programmable Trip Point Register has 8-bit
* fields for critical (catastrophic) and hot set trip point
* thresholds. The threshold value is always offset by its
* temperature base (50 degree Celsius).
*/
temp_out = temp + QRK_DTS_TEMP_BASE;
out = (store_ptps & ~(QRK_DTS_MASK_TP_THRES <<
(trip * QRK_DTS_SHIFT_TP)));
out |= (temp_out & QRK_DTS_MASK_TP_THRES) <<
(trip * QRK_DTS_SHIFT_TP);
ret = iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
QRK_DTS_REG_OFFSET_PTPS, out);
failed:
mutex_unlock(&dts_update_mutex);
return ret;
}
static inline int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip,
int temp)
{
return update_trip_temp(tzd->devdata, trip, temp);
}
static int sys_get_trip_type(struct thermal_zone_device *thermal,
int trip, enum thermal_trip_type *type)
{
if (trip)
*type = THERMAL_TRIP_HOT;
else
*type = THERMAL_TRIP_CRITICAL;
return 0;
}
static int sys_get_curr_temp(struct thermal_zone_device *tzd,
int *temp)
{
u32 out;
int ret;
mutex_lock(&dts_update_mutex);
ret = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
QRK_DTS_REG_OFFSET_TEMP, &out);
mutex_unlock(&dts_update_mutex);
if (ret)
return ret;
/*
* Thermal Sensor Temperature Register has 8-bit field
* for temperature value (offset by temperature base
* 50 degree Celsius).
*/
out = (out >> QRK_DTS_OFFSET_TEMP) & QRK_DTS_MASK_TEMP;
*temp = out - QRK_DTS_TEMP_BASE;
return 0;
}
static int sys_get_mode(struct thermal_zone_device *tzd,
enum thermal_device_mode *mode)
{
struct soc_sensor_entry *aux_entry = tzd->devdata;
*mode = aux_entry->mode;
return 0;
}
static int sys_set_mode(struct thermal_zone_device *tzd,
enum thermal_device_mode mode)
{
int ret;
mutex_lock(&dts_update_mutex);
if (mode == THERMAL_DEVICE_ENABLED)
ret = soc_dts_enable(tzd);
else
ret = soc_dts_disable(tzd);
mutex_unlock(&dts_update_mutex);
return ret;
}
static struct thermal_zone_device_ops tzone_ops = {
.get_temp = sys_get_curr_temp,
.get_trip_temp = sys_get_trip_temp,
.get_trip_type = sys_get_trip_type,
.set_trip_temp = sys_set_trip_temp,
.get_crit_temp = sys_get_crit_temp,
.get_mode = sys_get_mode,
.set_mode = sys_set_mode,
};
static void free_soc_dts(struct soc_sensor_entry *aux_entry)
{
if (aux_entry) {
if (!aux_entry->locked) {
mutex_lock(&dts_update_mutex);
iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
QRK_DTS_REG_OFFSET_ENABLE,
aux_entry->store_dts_enable);
iosf_mbi_write(QRK_MBI_UNIT_RMU, MBI_REG_WRITE,
QRK_DTS_REG_OFFSET_PTPS,
aux_entry->store_ptps);
mutex_unlock(&dts_update_mutex);
}
thermal_zone_device_unregister(aux_entry->tzone);
kfree(aux_entry);
}
}
static struct soc_sensor_entry *alloc_soc_dts(void)
{
struct soc_sensor_entry *aux_entry;
int err;
u32 out;
int wr_mask;
aux_entry = kzalloc(sizeof(*aux_entry), GFP_KERNEL);
if (!aux_entry) {
err = -ENOMEM;
return ERR_PTR(-ENOMEM);
}
/* Check if DTS register is locked */
err = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
QRK_DTS_REG_OFFSET_LOCK, &out);
if (err)
goto err_ret;
if (out & QRK_DTS_LOCK_BIT) {
aux_entry->locked = true;
wr_mask = QRK_DTS_WR_MASK_CLR;
} else {
aux_entry->locked = false;
wr_mask = QRK_DTS_WR_MASK_SET;
}
/* Store DTS default state if DTS registers are not locked */
if (!aux_entry->locked) {
/* Store DTS default enable for restore on exit */
err = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
QRK_DTS_REG_OFFSET_ENABLE,
&aux_entry->store_dts_enable);
if (err)
goto err_ret;
/* Store DTS default PTPS register for restore on exit */
err = iosf_mbi_read(QRK_MBI_UNIT_RMU, MBI_REG_READ,
QRK_DTS_REG_OFFSET_PTPS,
&aux_entry->store_ptps);
if (err)
goto err_ret;
}
aux_entry->tzone = thermal_zone_device_register("quark_dts",
QRK_MAX_DTS_TRIPS,
wr_mask,
aux_entry, &tzone_ops, NULL, 0, polling_delay);
if (IS_ERR(aux_entry->tzone)) {
err = PTR_ERR(aux_entry->tzone);
goto err_ret;
}
mutex_lock(&dts_update_mutex);
err = soc_dts_enable(aux_entry->tzone);
mutex_unlock(&dts_update_mutex);
if (err)
goto err_aux_status;
return aux_entry;
err_aux_status:
thermal_zone_device_unregister(aux_entry->tzone);
err_ret:
kfree(aux_entry);
return ERR_PTR(err);
}
static const struct x86_cpu_id qrk_thermal_ids[] __initconst = {
{ X86_VENDOR_INTEL, X86_FAMILY_QUARK, X86_MODEL_QUARK_X1000 },
{}
};
MODULE_DEVICE_TABLE(x86cpu, qrk_thermal_ids);
static int __init intel_quark_thermal_init(void)
{
if (!x86_match_cpu(qrk_thermal_ids) || !iosf_mbi_available())
return -ENODEV;
soc_dts = alloc_soc_dts();
if (IS_ERR(soc_dts))
return PTR_ERR(soc_dts);
return 0;
}
static void __exit intel_quark_thermal_exit(void)
{
free_soc_dts(soc_dts);
}
module_init(intel_quark_thermal_init)
module_exit(intel_quark_thermal_exit)
MODULE_DESCRIPTION("Intel Quark DTS Thermal Driver");
MODULE_AUTHOR("Ong Boon Leong <boon.leong.ong@intel.com>");
MODULE_LICENSE("Dual BSD/GPL");