| /* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c) |
| * |
| * A driver for Hermes or Prism 2 chipset based PCMCIA wireless |
| * adaptors, with Lucent/Agere, Intersil or Symbol firmware. |
| * |
| * Current maintainers (as of 29 September 2003) are: |
| * Pavel Roskin <proski AT gnu.org> |
| * and David Gibson <hermes AT gibson.dropbear.id.au> |
| * |
| * (C) Copyright David Gibson, IBM Corporation 2001-2003. |
| * Copyright (C) 2000 David Gibson, Linuxcare Australia. |
| * With some help from : |
| * Copyright (C) 2001 Jean Tourrilhes, HP Labs |
| * Copyright (C) 2001 Benjamin Herrenschmidt |
| * |
| * Based on dummy_cs.c 1.27 2000/06/12 21:27:25 |
| * |
| * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy |
| * AT fasta.fh-dortmund.de> |
| * http://www.stud.fh-dortmund.de/~andy/wvlan/ |
| * |
| * The contents of this file are subject to the Mozilla Public License |
| * Version 1.1 (the "License"); you may not use this file except in |
| * compliance with the License. You may obtain a copy of the License |
| * at http://www.mozilla.org/MPL/ |
| * |
| * Software distributed under the License is distributed on an "AS IS" |
| * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See |
| * the License for the specific language governing rights and |
| * limitations under the License. |
| * |
| * The initial developer of the original code is David A. Hinds |
| * <dahinds AT users.sourceforge.net>. Portions created by David |
| * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights |
| * Reserved. |
| * |
| * Alternatively, the contents of this file may be used under the |
| * terms of the GNU General Public License version 2 (the "GPL"), in |
| * which case the provisions of the GPL are applicable instead of the |
| * above. If you wish to allow the use of your version of this file |
| * only under the terms of the GPL and not to allow others to use your |
| * version of this file under the MPL, indicate your decision by |
| * deleting the provisions above and replace them with the notice and |
| * other provisions required by the GPL. If you do not delete the |
| * provisions above, a recipient may use your version of this file |
| * under either the MPL or the GPL. */ |
| |
| /* |
| * TODO |
| * o Handle de-encapsulation within network layer, provide 802.11 |
| * headers (patch from Thomas 'Dent' Mirlacher) |
| * o Fix possible races in SPY handling. |
| * o Disconnect wireless extensions from fundamental configuration. |
| * o (maybe) Software WEP support (patch from Stano Meduna). |
| * o (maybe) Use multiple Tx buffers - driver handling queue |
| * rather than firmware. |
| */ |
| |
| /* Locking and synchronization: |
| * |
| * The basic principle is that everything is serialized through a |
| * single spinlock, priv->lock. The lock is used in user, bh and irq |
| * context, so when taken outside hardirq context it should always be |
| * taken with interrupts disabled. The lock protects both the |
| * hardware and the struct orinoco_private. |
| * |
| * Another flag, priv->hw_unavailable indicates that the hardware is |
| * unavailable for an extended period of time (e.g. suspended, or in |
| * the middle of a hard reset). This flag is protected by the |
| * spinlock. All code which touches the hardware should check the |
| * flag after taking the lock, and if it is set, give up on whatever |
| * they are doing and drop the lock again. The orinoco_lock() |
| * function handles this (it unlocks and returns -EBUSY if |
| * hw_unavailable is non-zero). |
| */ |
| |
| #define DRIVER_NAME "orinoco" |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/if_arp.h> |
| #include <linux/wireless.h> |
| #include <net/iw_handler.h> |
| #include <net/ieee80211.h> |
| |
| #include "hermes_rid.h" |
| #include "orinoco.h" |
| |
| /********************************************************************/ |
| /* Module information */ |
| /********************************************************************/ |
| |
| MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>"); |
| MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards"); |
| MODULE_LICENSE("Dual MPL/GPL"); |
| |
| /* Level of debugging. Used in the macros in orinoco.h */ |
| #ifdef ORINOCO_DEBUG |
| int orinoco_debug = ORINOCO_DEBUG; |
| module_param(orinoco_debug, int, 0644); |
| MODULE_PARM_DESC(orinoco_debug, "Debug level"); |
| EXPORT_SYMBOL(orinoco_debug); |
| #endif |
| |
| static int suppress_linkstatus; /* = 0 */ |
| module_param(suppress_linkstatus, bool, 0644); |
| MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes"); |
| static int ignore_disconnect; /* = 0 */ |
| module_param(ignore_disconnect, int, 0644); |
| MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer"); |
| |
| static int force_monitor; /* = 0 */ |
| module_param(force_monitor, int, 0644); |
| MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions"); |
| |
| /********************************************************************/ |
| /* Compile time configuration and compatibility stuff */ |
| /********************************************************************/ |
| |
| /* We do this this way to avoid ifdefs in the actual code */ |
| #ifdef WIRELESS_SPY |
| #define SPY_NUMBER(priv) (priv->spy_data.spy_number) |
| #else |
| #define SPY_NUMBER(priv) 0 |
| #endif /* WIRELESS_SPY */ |
| |
| /********************************************************************/ |
| /* Internal constants */ |
| /********************************************************************/ |
| |
| /* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ |
| static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; |
| #define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) |
| |
| #define ORINOCO_MIN_MTU 256 |
| #define ORINOCO_MAX_MTU (IEEE80211_DATA_LEN - ENCAPS_OVERHEAD) |
| |
| #define SYMBOL_MAX_VER_LEN (14) |
| #define USER_BAP 0 |
| #define IRQ_BAP 1 |
| #define MAX_IRQLOOPS_PER_IRQ 10 |
| #define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of |
| * how many events the |
| * device could |
| * legitimately generate */ |
| #define SMALL_KEY_SIZE 5 |
| #define LARGE_KEY_SIZE 13 |
| #define TX_NICBUF_SIZE_BUG 1585 /* Bug in Symbol firmware */ |
| |
| #define DUMMY_FID 0xFFFF |
| |
| /*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \ |
| HERMES_MAX_MULTICAST : 0)*/ |
| #define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST) |
| |
| #define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \ |
| | HERMES_EV_TX | HERMES_EV_TXEXC \ |
| | HERMES_EV_WTERR | HERMES_EV_INFO \ |
| | HERMES_EV_INFDROP ) |
| |
| #define MAX_RID_LEN 1024 |
| |
| static const struct iw_handler_def orinoco_handler_def; |
| static const struct ethtool_ops orinoco_ethtool_ops; |
| |
| /********************************************************************/ |
| /* Data tables */ |
| /********************************************************************/ |
| |
| /* The frequency of each channel in MHz */ |
| static const long channel_frequency[] = { |
| 2412, 2417, 2422, 2427, 2432, 2437, 2442, |
| 2447, 2452, 2457, 2462, 2467, 2472, 2484 |
| }; |
| #define NUM_CHANNELS ARRAY_SIZE(channel_frequency) |
| |
| /* This tables gives the actual meanings of the bitrate IDs returned |
| * by the firmware. */ |
| static struct { |
| int bitrate; /* in 100s of kilobits */ |
| int automatic; |
| u16 agere_txratectrl; |
| u16 intersil_txratectrl; |
| } bitrate_table[] = { |
| {110, 1, 3, 15}, /* Entry 0 is the default */ |
| {10, 0, 1, 1}, |
| {10, 1, 1, 1}, |
| {20, 0, 2, 2}, |
| {20, 1, 6, 3}, |
| {55, 0, 4, 4}, |
| {55, 1, 7, 7}, |
| {110, 0, 5, 8}, |
| }; |
| #define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table) |
| |
| /********************************************************************/ |
| /* Data types */ |
| /********************************************************************/ |
| |
| /* Beginning of the Tx descriptor, used in TxExc handling */ |
| struct hermes_txexc_data { |
| struct hermes_tx_descriptor desc; |
| __le16 frame_ctl; |
| __le16 duration_id; |
| u8 addr1[ETH_ALEN]; |
| } __attribute__ ((packed)); |
| |
| /* Rx frame header except compatibility 802.3 header */ |
| struct hermes_rx_descriptor { |
| /* Control */ |
| __le16 status; |
| __le32 time; |
| u8 silence; |
| u8 signal; |
| u8 rate; |
| u8 rxflow; |
| __le32 reserved; |
| |
| /* 802.11 header */ |
| __le16 frame_ctl; |
| __le16 duration_id; |
| u8 addr1[ETH_ALEN]; |
| u8 addr2[ETH_ALEN]; |
| u8 addr3[ETH_ALEN]; |
| __le16 seq_ctl; |
| u8 addr4[ETH_ALEN]; |
| |
| /* Data length */ |
| __le16 data_len; |
| } __attribute__ ((packed)); |
| |
| /********************************************************************/ |
| /* Function prototypes */ |
| /********************************************************************/ |
| |
| static int __orinoco_program_rids(struct net_device *dev); |
| static void __orinoco_set_multicast_list(struct net_device *dev); |
| |
| /********************************************************************/ |
| /* Internal helper functions */ |
| /********************************************************************/ |
| |
| static inline void set_port_type(struct orinoco_private *priv) |
| { |
| switch (priv->iw_mode) { |
| case IW_MODE_INFRA: |
| priv->port_type = 1; |
| priv->createibss = 0; |
| break; |
| case IW_MODE_ADHOC: |
| if (priv->prefer_port3) { |
| priv->port_type = 3; |
| priv->createibss = 0; |
| } else { |
| priv->port_type = priv->ibss_port; |
| priv->createibss = 1; |
| } |
| break; |
| case IW_MODE_MONITOR: |
| priv->port_type = 3; |
| priv->createibss = 0; |
| break; |
| default: |
| printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n", |
| priv->ndev->name); |
| } |
| } |
| |
| #define ORINOCO_MAX_BSS_COUNT 64 |
| static int orinoco_bss_data_allocate(struct orinoco_private *priv) |
| { |
| if (priv->bss_data) |
| return 0; |
| |
| priv->bss_data = |
| kzalloc(ORINOCO_MAX_BSS_COUNT * sizeof(bss_element), GFP_KERNEL); |
| if (!priv->bss_data) { |
| printk(KERN_WARNING "Out of memory allocating beacons"); |
| return -ENOMEM; |
| } |
| return 0; |
| } |
| |
| static void orinoco_bss_data_free(struct orinoco_private *priv) |
| { |
| kfree(priv->bss_data); |
| priv->bss_data = NULL; |
| } |
| |
| static void orinoco_bss_data_init(struct orinoco_private *priv) |
| { |
| int i; |
| |
| INIT_LIST_HEAD(&priv->bss_free_list); |
| INIT_LIST_HEAD(&priv->bss_list); |
| for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++) |
| list_add_tail(&priv->bss_data[i].list, &priv->bss_free_list); |
| } |
| |
| /********************************************************************/ |
| /* Device methods */ |
| /********************************************************************/ |
| |
| static int orinoco_open(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| unsigned long flags; |
| int err; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| err = __orinoco_up(dev); |
| |
| if (! err) |
| priv->open = 1; |
| |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_stop(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int err = 0; |
| |
| /* We mustn't use orinoco_lock() here, because we need to be |
| able to close the interface even if hw_unavailable is set |
| (e.g. as we're released after a PC Card removal) */ |
| spin_lock_irq(&priv->lock); |
| |
| priv->open = 0; |
| |
| err = __orinoco_down(dev); |
| |
| spin_unlock_irq(&priv->lock); |
| |
| return err; |
| } |
| |
| static struct net_device_stats *orinoco_get_stats(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| |
| return &priv->stats; |
| } |
| |
| static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| struct iw_statistics *wstats = &priv->wstats; |
| int err; |
| unsigned long flags; |
| |
| if (! netif_device_present(dev)) { |
| printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n", |
| dev->name); |
| return NULL; /* FIXME: Can we do better than this? */ |
| } |
| |
| /* If busy, return the old stats. Returning NULL may cause |
| * the interface to disappear from /proc/net/wireless */ |
| if (orinoco_lock(priv, &flags) != 0) |
| return wstats; |
| |
| /* We can't really wait for the tallies inquiry command to |
| * complete, so we just use the previous results and trigger |
| * a new tallies inquiry command for next time - Jean II */ |
| /* FIXME: Really we should wait for the inquiry to come back - |
| * as it is the stats we give don't make a whole lot of sense. |
| * Unfortunately, it's not clear how to do that within the |
| * wireless extensions framework: I think we're in user |
| * context, but a lock seems to be held by the time we get in |
| * here so we're not safe to sleep here. */ |
| hermes_inquire(hw, HERMES_INQ_TALLIES); |
| |
| if (priv->iw_mode == IW_MODE_ADHOC) { |
| memset(&wstats->qual, 0, sizeof(wstats->qual)); |
| /* If a spy address is defined, we report stats of the |
| * first spy address - Jean II */ |
| if (SPY_NUMBER(priv)) { |
| wstats->qual.qual = priv->spy_data.spy_stat[0].qual; |
| wstats->qual.level = priv->spy_data.spy_stat[0].level; |
| wstats->qual.noise = priv->spy_data.spy_stat[0].noise; |
| wstats->qual.updated = priv->spy_data.spy_stat[0].updated; |
| } |
| } else { |
| struct { |
| __le16 qual, signal, noise, unused; |
| } __attribute__ ((packed)) cq; |
| |
| err = HERMES_READ_RECORD(hw, USER_BAP, |
| HERMES_RID_COMMSQUALITY, &cq); |
| |
| if (!err) { |
| wstats->qual.qual = (int)le16_to_cpu(cq.qual); |
| wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; |
| wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; |
| wstats->qual.updated = 7; |
| } |
| } |
| |
| orinoco_unlock(priv, &flags); |
| return wstats; |
| } |
| |
| static void orinoco_set_multicast_list(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) { |
| printk(KERN_DEBUG "%s: orinoco_set_multicast_list() " |
| "called when hw_unavailable\n", dev->name); |
| return; |
| } |
| |
| __orinoco_set_multicast_list(dev); |
| orinoco_unlock(priv, &flags); |
| } |
| |
| static int orinoco_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| |
| if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) ) |
| return -EINVAL; |
| |
| if ( (new_mtu + ENCAPS_OVERHEAD + IEEE80211_HLEN) > |
| (priv->nicbuf_size - ETH_HLEN) ) |
| return -EINVAL; |
| |
| dev->mtu = new_mtu; |
| |
| return 0; |
| } |
| |
| /********************************************************************/ |
| /* Tx path */ |
| /********************************************************************/ |
| |
| static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct net_device_stats *stats = &priv->stats; |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| u16 txfid = priv->txfid; |
| struct ethhdr *eh; |
| int data_off; |
| struct hermes_tx_descriptor desc; |
| unsigned long flags; |
| |
| if (! netif_running(dev)) { |
| printk(KERN_ERR "%s: Tx on stopped device!\n", |
| dev->name); |
| return NETDEV_TX_BUSY; |
| } |
| |
| if (netif_queue_stopped(dev)) { |
| printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", |
| dev->name); |
| return NETDEV_TX_BUSY; |
| } |
| |
| if (orinoco_lock(priv, &flags) != 0) { |
| printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n", |
| dev->name); |
| return NETDEV_TX_BUSY; |
| } |
| |
| if (! netif_carrier_ok(dev) || (priv->iw_mode == IW_MODE_MONITOR)) { |
| /* Oops, the firmware hasn't established a connection, |
| silently drop the packet (this seems to be the |
| safest approach). */ |
| goto drop; |
| } |
| |
| /* Check packet length */ |
| if (skb->len < ETH_HLEN) |
| goto drop; |
| |
| eh = (struct ethhdr *)skb->data; |
| |
| memset(&desc, 0, sizeof(desc)); |
| desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX); |
| err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0); |
| if (err) { |
| if (net_ratelimit()) |
| printk(KERN_ERR "%s: Error %d writing Tx descriptor " |
| "to BAP\n", dev->name, err); |
| goto busy; |
| } |
| |
| /* Clear the 802.11 header and data length fields - some |
| * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused |
| * if this isn't done. */ |
| hermes_clear_words(hw, HERMES_DATA0, |
| HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); |
| |
| /* Encapsulate Ethernet-II frames */ |
| if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */ |
| struct header_struct { |
| struct ethhdr eth; /* 802.3 header */ |
| u8 encap[6]; /* 802.2 header */ |
| } __attribute__ ((packed)) hdr; |
| |
| /* Strip destination and source from the data */ |
| skb_pull(skb, 2 * ETH_ALEN); |
| data_off = HERMES_802_2_OFFSET + sizeof(encaps_hdr); |
| |
| /* And move them to a separate header */ |
| memcpy(&hdr.eth, eh, 2 * ETH_ALEN); |
| hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len); |
| memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr)); |
| |
| err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr), |
| txfid, HERMES_802_3_OFFSET); |
| if (err) { |
| if (net_ratelimit()) |
| printk(KERN_ERR "%s: Error %d writing packet " |
| "header to BAP\n", dev->name, err); |
| goto busy; |
| } |
| } else { /* IEEE 802.3 frame */ |
| data_off = HERMES_802_3_OFFSET; |
| } |
| |
| err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len, |
| txfid, data_off); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d writing packet to BAP\n", |
| dev->name, err); |
| goto busy; |
| } |
| |
| /* Finally, we actually initiate the send */ |
| netif_stop_queue(dev); |
| |
| err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL, |
| txfid, NULL); |
| if (err) { |
| netif_start_queue(dev); |
| if (net_ratelimit()) |
| printk(KERN_ERR "%s: Error %d transmitting packet\n", |
| dev->name, err); |
| goto busy; |
| } |
| |
| dev->trans_start = jiffies; |
| stats->tx_bytes += data_off + skb->len; |
| goto ok; |
| |
| drop: |
| stats->tx_errors++; |
| stats->tx_dropped++; |
| |
| ok: |
| orinoco_unlock(priv, &flags); |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| |
| busy: |
| if (err == -EIO) |
| schedule_work(&priv->reset_work); |
| orinoco_unlock(priv, &flags); |
| return NETDEV_TX_BUSY; |
| } |
| |
| static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| u16 fid = hermes_read_regn(hw, ALLOCFID); |
| |
| if (fid != priv->txfid) { |
| if (fid != DUMMY_FID) |
| printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n", |
| dev->name, fid); |
| return; |
| } |
| |
| hermes_write_regn(hw, ALLOCFID, DUMMY_FID); |
| } |
| |
| static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct net_device_stats *stats = &priv->stats; |
| |
| stats->tx_packets++; |
| |
| netif_wake_queue(dev); |
| |
| hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); |
| } |
| |
| static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct net_device_stats *stats = &priv->stats; |
| u16 fid = hermes_read_regn(hw, TXCOMPLFID); |
| u16 status; |
| struct hermes_txexc_data hdr; |
| int err = 0; |
| |
| if (fid == DUMMY_FID) |
| return; /* Nothing's really happened */ |
| |
| /* Read part of the frame header - we need status and addr1 */ |
| err = hermes_bap_pread(hw, IRQ_BAP, &hdr, |
| sizeof(struct hermes_txexc_data), |
| fid, 0); |
| |
| hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); |
| stats->tx_errors++; |
| |
| if (err) { |
| printk(KERN_WARNING "%s: Unable to read descriptor on Tx error " |
| "(FID=%04X error %d)\n", |
| dev->name, fid, err); |
| return; |
| } |
| |
| DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name, |
| err, fid); |
| |
| /* We produce a TXDROP event only for retry or lifetime |
| * exceeded, because that's the only status that really mean |
| * that this particular node went away. |
| * Other errors means that *we* screwed up. - Jean II */ |
| status = le16_to_cpu(hdr.desc.status); |
| if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) { |
| union iwreq_data wrqu; |
| |
| /* Copy 802.11 dest address. |
| * We use the 802.11 header because the frame may |
| * not be 802.3 or may be mangled... |
| * In Ad-Hoc mode, it will be the node address. |
| * In managed mode, it will be most likely the AP addr |
| * User space will figure out how to convert it to |
| * whatever it needs (IP address or else). |
| * - Jean II */ |
| memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN); |
| wrqu.addr.sa_family = ARPHRD_ETHER; |
| |
| /* Send event to user space */ |
| wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL); |
| } |
| |
| netif_wake_queue(dev); |
| } |
| |
| static void orinoco_tx_timeout(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct net_device_stats *stats = &priv->stats; |
| struct hermes *hw = &priv->hw; |
| |
| printk(KERN_WARNING "%s: Tx timeout! " |
| "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n", |
| dev->name, hermes_read_regn(hw, ALLOCFID), |
| hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT)); |
| |
| stats->tx_errors++; |
| |
| schedule_work(&priv->reset_work); |
| } |
| |
| /********************************************************************/ |
| /* Rx path (data frames) */ |
| /********************************************************************/ |
| |
| /* Does the frame have a SNAP header indicating it should be |
| * de-encapsulated to Ethernet-II? */ |
| static inline int is_ethersnap(void *_hdr) |
| { |
| u8 *hdr = _hdr; |
| |
| /* We de-encapsulate all packets which, a) have SNAP headers |
| * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header |
| * and where b) the OUI of the SNAP header is 00:00:00 or |
| * 00:00:f8 - we need both because different APs appear to use |
| * different OUIs for some reason */ |
| return (memcmp(hdr, &encaps_hdr, 5) == 0) |
| && ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) ); |
| } |
| |
| static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac, |
| int level, int noise) |
| { |
| struct iw_quality wstats; |
| wstats.level = level - 0x95; |
| wstats.noise = noise - 0x95; |
| wstats.qual = (level > noise) ? (level - noise) : 0; |
| wstats.updated = 7; |
| /* Update spy records */ |
| wireless_spy_update(dev, mac, &wstats); |
| } |
| |
| static void orinoco_stat_gather(struct net_device *dev, |
| struct sk_buff *skb, |
| struct hermes_rx_descriptor *desc) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| |
| /* Using spy support with lots of Rx packets, like in an |
| * infrastructure (AP), will really slow down everything, because |
| * the MAC address must be compared to each entry of the spy list. |
| * If the user really asks for it (set some address in the |
| * spy list), we do it, but he will pay the price. |
| * Note that to get here, you need both WIRELESS_SPY |
| * compiled in AND some addresses in the list !!! |
| */ |
| /* Note : gcc will optimise the whole section away if |
| * WIRELESS_SPY is not defined... - Jean II */ |
| if (SPY_NUMBER(priv)) { |
| orinoco_spy_gather(dev, skb_mac_header(skb) + ETH_ALEN, |
| desc->signal, desc->silence); |
| } |
| } |
| |
| /* |
| * orinoco_rx_monitor - handle received monitor frames. |
| * |
| * Arguments: |
| * dev network device |
| * rxfid received FID |
| * desc rx descriptor of the frame |
| * |
| * Call context: interrupt |
| */ |
| static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid, |
| struct hermes_rx_descriptor *desc) |
| { |
| u32 hdrlen = 30; /* return full header by default */ |
| u32 datalen = 0; |
| u16 fc; |
| int err; |
| int len; |
| struct sk_buff *skb; |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct net_device_stats *stats = &priv->stats; |
| hermes_t *hw = &priv->hw; |
| |
| len = le16_to_cpu(desc->data_len); |
| |
| /* Determine the size of the header and the data */ |
| fc = le16_to_cpu(desc->frame_ctl); |
| switch (fc & IEEE80211_FCTL_FTYPE) { |
| case IEEE80211_FTYPE_DATA: |
| if ((fc & IEEE80211_FCTL_TODS) |
| && (fc & IEEE80211_FCTL_FROMDS)) |
| hdrlen = 30; |
| else |
| hdrlen = 24; |
| datalen = len; |
| break; |
| case IEEE80211_FTYPE_MGMT: |
| hdrlen = 24; |
| datalen = len; |
| break; |
| case IEEE80211_FTYPE_CTL: |
| switch (fc & IEEE80211_FCTL_STYPE) { |
| case IEEE80211_STYPE_PSPOLL: |
| case IEEE80211_STYPE_RTS: |
| case IEEE80211_STYPE_CFEND: |
| case IEEE80211_STYPE_CFENDACK: |
| hdrlen = 16; |
| break; |
| case IEEE80211_STYPE_CTS: |
| case IEEE80211_STYPE_ACK: |
| hdrlen = 10; |
| break; |
| } |
| break; |
| default: |
| /* Unknown frame type */ |
| break; |
| } |
| |
| /* sanity check the length */ |
| if (datalen > IEEE80211_DATA_LEN + 12) { |
| printk(KERN_DEBUG "%s: oversized monitor frame, " |
| "data length = %d\n", dev->name, datalen); |
| stats->rx_length_errors++; |
| goto update_stats; |
| } |
| |
| skb = dev_alloc_skb(hdrlen + datalen); |
| if (!skb) { |
| printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n", |
| dev->name); |
| goto update_stats; |
| } |
| |
| /* Copy the 802.11 header to the skb */ |
| memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen); |
| skb_reset_mac_header(skb); |
| |
| /* If any, copy the data from the card to the skb */ |
| if (datalen > 0) { |
| err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen), |
| ALIGN(datalen, 2), rxfid, |
| HERMES_802_2_OFFSET); |
| if (err) { |
| printk(KERN_ERR "%s: error %d reading monitor frame\n", |
| dev->name, err); |
| goto drop; |
| } |
| } |
| |
| skb->dev = dev; |
| skb->ip_summed = CHECKSUM_NONE; |
| skb->pkt_type = PACKET_OTHERHOST; |
| skb->protocol = __constant_htons(ETH_P_802_2); |
| |
| dev->last_rx = jiffies; |
| stats->rx_packets++; |
| stats->rx_bytes += skb->len; |
| |
| netif_rx(skb); |
| return; |
| |
| drop: |
| dev_kfree_skb_irq(skb); |
| update_stats: |
| stats->rx_errors++; |
| stats->rx_dropped++; |
| } |
| |
| static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct net_device_stats *stats = &priv->stats; |
| struct iw_statistics *wstats = &priv->wstats; |
| struct sk_buff *skb = NULL; |
| u16 rxfid, status, fc; |
| int length; |
| struct hermes_rx_descriptor desc; |
| struct ethhdr *hdr; |
| int err; |
| |
| rxfid = hermes_read_regn(hw, RXFID); |
| |
| err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), |
| rxfid, 0); |
| if (err) { |
| printk(KERN_ERR "%s: error %d reading Rx descriptor. " |
| "Frame dropped.\n", dev->name, err); |
| goto update_stats; |
| } |
| |
| status = le16_to_cpu(desc.status); |
| |
| if (status & HERMES_RXSTAT_BADCRC) { |
| DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", |
| dev->name); |
| stats->rx_crc_errors++; |
| goto update_stats; |
| } |
| |
| /* Handle frames in monitor mode */ |
| if (priv->iw_mode == IW_MODE_MONITOR) { |
| orinoco_rx_monitor(dev, rxfid, &desc); |
| return; |
| } |
| |
| if (status & HERMES_RXSTAT_UNDECRYPTABLE) { |
| DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n", |
| dev->name); |
| wstats->discard.code++; |
| goto update_stats; |
| } |
| |
| length = le16_to_cpu(desc.data_len); |
| fc = le16_to_cpu(desc.frame_ctl); |
| |
| /* Sanity checks */ |
| if (length < 3) { /* No for even an 802.2 LLC header */ |
| /* At least on Symbol firmware with PCF we get quite a |
| lot of these legitimately - Poll frames with no |
| data. */ |
| return; |
| } |
| if (length > IEEE80211_DATA_LEN) { |
| printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", |
| dev->name, length); |
| stats->rx_length_errors++; |
| goto update_stats; |
| } |
| |
| /* We need space for the packet data itself, plus an ethernet |
| header, plus 2 bytes so we can align the IP header on a |
| 32bit boundary, plus 1 byte so we can read in odd length |
| packets from the card, which has an IO granularity of 16 |
| bits */ |
| skb = dev_alloc_skb(length+ETH_HLEN+2+1); |
| if (!skb) { |
| printk(KERN_WARNING "%s: Can't allocate skb for Rx\n", |
| dev->name); |
| goto update_stats; |
| } |
| |
| /* We'll prepend the header, so reserve space for it. The worst |
| case is no decapsulation, when 802.3 header is prepended and |
| nothing is removed. 2 is for aligning the IP header. */ |
| skb_reserve(skb, ETH_HLEN + 2); |
| |
| err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length), |
| ALIGN(length, 2), rxfid, |
| HERMES_802_2_OFFSET); |
| if (err) { |
| printk(KERN_ERR "%s: error %d reading frame. " |
| "Frame dropped.\n", dev->name, err); |
| goto drop; |
| } |
| |
| /* Handle decapsulation |
| * In most cases, the firmware tell us about SNAP frames. |
| * For some reason, the SNAP frames sent by LinkSys APs |
| * are not properly recognised by most firmwares. |
| * So, check ourselves */ |
| if (length >= ENCAPS_OVERHEAD && |
| (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || |
| ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || |
| is_ethersnap(skb->data))) { |
| /* These indicate a SNAP within 802.2 LLC within |
| 802.11 frame which we'll need to de-encapsulate to |
| the original EthernetII frame. */ |
| hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD); |
| } else { |
| /* 802.3 frame - prepend 802.3 header as is */ |
| hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN); |
| hdr->h_proto = htons(length); |
| } |
| memcpy(hdr->h_dest, desc.addr1, ETH_ALEN); |
| if (fc & IEEE80211_FCTL_FROMDS) |
| memcpy(hdr->h_source, desc.addr3, ETH_ALEN); |
| else |
| memcpy(hdr->h_source, desc.addr2, ETH_ALEN); |
| |
| dev->last_rx = jiffies; |
| skb->protocol = eth_type_trans(skb, dev); |
| skb->ip_summed = CHECKSUM_NONE; |
| if (fc & IEEE80211_FCTL_TODS) |
| skb->pkt_type = PACKET_OTHERHOST; |
| |
| /* Process the wireless stats if needed */ |
| orinoco_stat_gather(dev, skb, &desc); |
| |
| /* Pass the packet to the networking stack */ |
| netif_rx(skb); |
| stats->rx_packets++; |
| stats->rx_bytes += length; |
| |
| return; |
| |
| drop: |
| dev_kfree_skb_irq(skb); |
| update_stats: |
| stats->rx_errors++; |
| stats->rx_dropped++; |
| } |
| |
| /********************************************************************/ |
| /* Rx path (info frames) */ |
| /********************************************************************/ |
| |
| static void print_linkstatus(struct net_device *dev, u16 status) |
| { |
| char * s; |
| |
| if (suppress_linkstatus) |
| return; |
| |
| switch (status) { |
| case HERMES_LINKSTATUS_NOT_CONNECTED: |
| s = "Not Connected"; |
| break; |
| case HERMES_LINKSTATUS_CONNECTED: |
| s = "Connected"; |
| break; |
| case HERMES_LINKSTATUS_DISCONNECTED: |
| s = "Disconnected"; |
| break; |
| case HERMES_LINKSTATUS_AP_CHANGE: |
| s = "AP Changed"; |
| break; |
| case HERMES_LINKSTATUS_AP_OUT_OF_RANGE: |
| s = "AP Out of Range"; |
| break; |
| case HERMES_LINKSTATUS_AP_IN_RANGE: |
| s = "AP In Range"; |
| break; |
| case HERMES_LINKSTATUS_ASSOC_FAILED: |
| s = "Association Failed"; |
| break; |
| default: |
| s = "UNKNOWN"; |
| } |
| |
| printk(KERN_INFO "%s: New link status: %s (%04x)\n", |
| dev->name, s, status); |
| } |
| |
| /* Search scan results for requested BSSID, join it if found */ |
| static void orinoco_join_ap(struct work_struct *work) |
| { |
| struct orinoco_private *priv = |
| container_of(work, struct orinoco_private, join_work); |
| struct net_device *dev = priv->ndev; |
| struct hermes *hw = &priv->hw; |
| int err; |
| unsigned long flags; |
| struct join_req { |
| u8 bssid[ETH_ALEN]; |
| __le16 channel; |
| } __attribute__ ((packed)) req; |
| const int atom_len = offsetof(struct prism2_scan_apinfo, atim); |
| struct prism2_scan_apinfo *atom = NULL; |
| int offset = 4; |
| int found = 0; |
| u8 *buf; |
| u16 len; |
| |
| /* Allocate buffer for scan results */ |
| buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL); |
| if (! buf) |
| return; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| goto fail_lock; |
| |
| /* Sanity checks in case user changed something in the meantime */ |
| if (! priv->bssid_fixed) |
| goto out; |
| |
| if (strlen(priv->desired_essid) == 0) |
| goto out; |
| |
| /* Read scan results from the firmware */ |
| err = hermes_read_ltv(hw, USER_BAP, |
| HERMES_RID_SCANRESULTSTABLE, |
| MAX_SCAN_LEN, &len, buf); |
| if (err) { |
| printk(KERN_ERR "%s: Cannot read scan results\n", |
| dev->name); |
| goto out; |
| } |
| |
| len = HERMES_RECLEN_TO_BYTES(len); |
| |
| /* Go through the scan results looking for the channel of the AP |
| * we were requested to join */ |
| for (; offset + atom_len <= len; offset += atom_len) { |
| atom = (struct prism2_scan_apinfo *) (buf + offset); |
| if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) { |
| found = 1; |
| break; |
| } |
| } |
| |
| if (! found) { |
| DEBUG(1, "%s: Requested AP not found in scan results\n", |
| dev->name); |
| goto out; |
| } |
| |
| memcpy(req.bssid, priv->desired_bssid, ETH_ALEN); |
| req.channel = atom->channel; /* both are little-endian */ |
| err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST, |
| &req); |
| if (err) |
| printk(KERN_ERR "%s: Error issuing join request\n", dev->name); |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| |
| fail_lock: |
| kfree(buf); |
| } |
| |
| /* Send new BSSID to userspace */ |
| static void orinoco_send_wevents(struct work_struct *work) |
| { |
| struct orinoco_private *priv = |
| container_of(work, struct orinoco_private, wevent_work); |
| struct net_device *dev = priv->ndev; |
| struct hermes *hw = &priv->hw; |
| union iwreq_data wrqu; |
| int err; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return; |
| |
| err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID, |
| ETH_ALEN, NULL, wrqu.ap_addr.sa_data); |
| if (err != 0) |
| goto out; |
| |
| wrqu.ap_addr.sa_family = ARPHRD_ETHER; |
| |
| /* Send event to user space */ |
| wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| } |
| |
| |
| static inline void orinoco_clear_scan_results(struct orinoco_private *priv, |
| unsigned long scan_age) |
| { |
| bss_element *bss; |
| bss_element *tmp_bss; |
| |
| /* Blow away current list of scan results */ |
| list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) { |
| if (!scan_age || |
| time_after(jiffies, bss->last_scanned + scan_age)) { |
| list_move_tail(&bss->list, &priv->bss_free_list); |
| /* Don't blow away ->list, just BSS data */ |
| memset(bss, 0, sizeof(bss->bss)); |
| bss->last_scanned = 0; |
| } |
| } |
| } |
| |
| static int orinoco_process_scan_results(struct net_device *dev, |
| unsigned char *buf, |
| int len) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int offset; /* In the scan data */ |
| union hermes_scan_info *atom; |
| int atom_len; |
| |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: |
| atom_len = sizeof(struct agere_scan_apinfo); |
| offset = 0; |
| break; |
| case FIRMWARE_TYPE_SYMBOL: |
| /* Lack of documentation necessitates this hack. |
| * Different firmwares have 68 or 76 byte long atoms. |
| * We try modulo first. If the length divides by both, |
| * we check what would be the channel in the second |
| * frame for a 68-byte atom. 76-byte atoms have 0 there. |
| * Valid channel cannot be 0. */ |
| if (len % 76) |
| atom_len = 68; |
| else if (len % 68) |
| atom_len = 76; |
| else if (len >= 1292 && buf[68] == 0) |
| atom_len = 76; |
| else |
| atom_len = 68; |
| offset = 0; |
| break; |
| case FIRMWARE_TYPE_INTERSIL: |
| offset = 4; |
| if (priv->has_hostscan) { |
| atom_len = le16_to_cpup((__le16 *)buf); |
| /* Sanity check for atom_len */ |
| if (atom_len < sizeof(struct prism2_scan_apinfo)) { |
| printk(KERN_ERR "%s: Invalid atom_len in scan " |
| "data: %d\n", dev->name, atom_len); |
| return -EIO; |
| } |
| } else |
| atom_len = offsetof(struct prism2_scan_apinfo, atim); |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| /* Check that we got an whole number of atoms */ |
| if ((len - offset) % atom_len) { |
| printk(KERN_ERR "%s: Unexpected scan data length %d, " |
| "atom_len %d, offset %d\n", dev->name, len, |
| atom_len, offset); |
| return -EIO; |
| } |
| |
| orinoco_clear_scan_results(priv, msecs_to_jiffies(15000)); |
| |
| /* Read the entries one by one */ |
| for (; offset + atom_len <= len; offset += atom_len) { |
| int found = 0; |
| bss_element *bss = NULL; |
| |
| /* Get next atom */ |
| atom = (union hermes_scan_info *) (buf + offset); |
| |
| /* Try to update an existing bss first */ |
| list_for_each_entry(bss, &priv->bss_list, list) { |
| if (compare_ether_addr(bss->bss.a.bssid, atom->a.bssid)) |
| continue; |
| if (le16_to_cpu(bss->bss.a.essid_len) != |
| le16_to_cpu(atom->a.essid_len)) |
| continue; |
| if (memcmp(bss->bss.a.essid, atom->a.essid, |
| le16_to_cpu(atom->a.essid_len))) |
| continue; |
| found = 1; |
| break; |
| } |
| |
| /* Grab a bss off the free list */ |
| if (!found && !list_empty(&priv->bss_free_list)) { |
| bss = list_entry(priv->bss_free_list.next, |
| bss_element, list); |
| list_del(priv->bss_free_list.next); |
| |
| list_add_tail(&bss->list, &priv->bss_list); |
| } |
| |
| if (bss) { |
| /* Always update the BSS to get latest beacon info */ |
| memcpy(&bss->bss, atom, sizeof(bss->bss)); |
| bss->last_scanned = jiffies; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| u16 infofid; |
| struct { |
| __le16 len; |
| __le16 type; |
| } __attribute__ ((packed)) info; |
| int len, type; |
| int err; |
| |
| /* This is an answer to an INQUIRE command that we did earlier, |
| * or an information "event" generated by the card |
| * The controller return to us a pseudo frame containing |
| * the information in question - Jean II */ |
| infofid = hermes_read_regn(hw, INFOFID); |
| |
| /* Read the info frame header - don't try too hard */ |
| err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info), |
| infofid, 0); |
| if (err) { |
| printk(KERN_ERR "%s: error %d reading info frame. " |
| "Frame dropped.\n", dev->name, err); |
| return; |
| } |
| |
| len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len)); |
| type = le16_to_cpu(info.type); |
| |
| switch (type) { |
| case HERMES_INQ_TALLIES: { |
| struct hermes_tallies_frame tallies; |
| struct iw_statistics *wstats = &priv->wstats; |
| |
| if (len > sizeof(tallies)) { |
| printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n", |
| dev->name, len); |
| len = sizeof(tallies); |
| } |
| |
| err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len, |
| infofid, sizeof(info)); |
| if (err) |
| break; |
| |
| /* Increment our various counters */ |
| /* wstats->discard.nwid - no wrong BSSID stuff */ |
| wstats->discard.code += |
| le16_to_cpu(tallies.RxWEPUndecryptable); |
| if (len == sizeof(tallies)) |
| wstats->discard.code += |
| le16_to_cpu(tallies.RxDiscards_WEPICVError) + |
| le16_to_cpu(tallies.RxDiscards_WEPExcluded); |
| wstats->discard.misc += |
| le16_to_cpu(tallies.TxDiscardsWrongSA); |
| wstats->discard.fragment += |
| le16_to_cpu(tallies.RxMsgInBadMsgFragments); |
| wstats->discard.retries += |
| le16_to_cpu(tallies.TxRetryLimitExceeded); |
| /* wstats->miss.beacon - no match */ |
| } |
| break; |
| case HERMES_INQ_LINKSTATUS: { |
| struct hermes_linkstatus linkstatus; |
| u16 newstatus; |
| int connected; |
| |
| if (priv->iw_mode == IW_MODE_MONITOR) |
| break; |
| |
| if (len != sizeof(linkstatus)) { |
| printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n", |
| dev->name, len); |
| break; |
| } |
| |
| err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len, |
| infofid, sizeof(info)); |
| if (err) |
| break; |
| newstatus = le16_to_cpu(linkstatus.linkstatus); |
| |
| /* Symbol firmware uses "out of range" to signal that |
| * the hostscan frame can be requested. */ |
| if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE && |
| priv->firmware_type == FIRMWARE_TYPE_SYMBOL && |
| priv->has_hostscan && priv->scan_inprogress) { |
| hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL); |
| break; |
| } |
| |
| connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) |
| || (newstatus == HERMES_LINKSTATUS_AP_CHANGE) |
| || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE); |
| |
| if (connected) |
| netif_carrier_on(dev); |
| else if (!ignore_disconnect) |
| netif_carrier_off(dev); |
| |
| if (newstatus != priv->last_linkstatus) { |
| priv->last_linkstatus = newstatus; |
| print_linkstatus(dev, newstatus); |
| /* The info frame contains only one word which is the |
| * status (see hermes.h). The status is pretty boring |
| * in itself, that's why we export the new BSSID... |
| * Jean II */ |
| schedule_work(&priv->wevent_work); |
| } |
| } |
| break; |
| case HERMES_INQ_SCAN: |
| if (!priv->scan_inprogress && priv->bssid_fixed && |
| priv->firmware_type == FIRMWARE_TYPE_INTERSIL) { |
| schedule_work(&priv->join_work); |
| break; |
| } |
| /* fall through */ |
| case HERMES_INQ_HOSTSCAN: |
| case HERMES_INQ_HOSTSCAN_SYMBOL: { |
| /* Result of a scanning. Contains information about |
| * cells in the vicinity - Jean II */ |
| union iwreq_data wrqu; |
| unsigned char *buf; |
| |
| /* Scan is no longer in progress */ |
| priv->scan_inprogress = 0; |
| |
| /* Sanity check */ |
| if (len > 4096) { |
| printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n", |
| dev->name, len); |
| break; |
| } |
| |
| /* Allocate buffer for results */ |
| buf = kmalloc(len, GFP_ATOMIC); |
| if (buf == NULL) |
| /* No memory, so can't printk()... */ |
| break; |
| |
| /* Read scan data */ |
| err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len, |
| infofid, sizeof(info)); |
| if (err) { |
| kfree(buf); |
| break; |
| } |
| |
| #ifdef ORINOCO_DEBUG |
| { |
| int i; |
| printk(KERN_DEBUG "Scan result [%02X", buf[0]); |
| for(i = 1; i < (len * 2); i++) |
| printk(":%02X", buf[i]); |
| printk("]\n"); |
| } |
| #endif /* ORINOCO_DEBUG */ |
| |
| if (orinoco_process_scan_results(dev, buf, len) == 0) { |
| /* Send an empty event to user space. |
| * We don't send the received data on the event because |
| * it would require us to do complex transcoding, and |
| * we want to minimise the work done in the irq handler |
| * Use a request to extract the data - Jean II */ |
| wrqu.data.length = 0; |
| wrqu.data.flags = 0; |
| wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL); |
| } |
| kfree(buf); |
| } |
| break; |
| case HERMES_INQ_SEC_STAT_AGERE: |
| /* Security status (Agere specific) */ |
| /* Ignore this frame for now */ |
| if (priv->firmware_type == FIRMWARE_TYPE_AGERE) |
| break; |
| /* fall through */ |
| default: |
| printk(KERN_DEBUG "%s: Unknown information frame received: " |
| "type 0x%04x, length %d\n", dev->name, type, len); |
| /* We don't actually do anything about it */ |
| break; |
| } |
| } |
| |
| static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw) |
| { |
| if (net_ratelimit()) |
| printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name); |
| } |
| |
| /********************************************************************/ |
| /* Internal hardware control routines */ |
| /********************************************************************/ |
| |
| int __orinoco_up(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct hermes *hw = &priv->hw; |
| int err; |
| |
| netif_carrier_off(dev); /* just to make sure */ |
| |
| err = __orinoco_program_rids(dev); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d configuring card\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Fire things up again */ |
| hermes_set_irqmask(hw, ORINOCO_INTEN); |
| err = hermes_enable_port(hw, 0); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d enabling MAC port\n", |
| dev->name, err); |
| return err; |
| } |
| |
| netif_start_queue(dev); |
| |
| return 0; |
| } |
| |
| int __orinoco_down(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct hermes *hw = &priv->hw; |
| int err; |
| |
| netif_stop_queue(dev); |
| |
| if (! priv->hw_unavailable) { |
| if (! priv->broken_disableport) { |
| err = hermes_disable_port(hw, 0); |
| if (err) { |
| /* Some firmwares (e.g. Intersil 1.3.x) seem |
| * to have problems disabling the port, oh |
| * well, too bad. */ |
| printk(KERN_WARNING "%s: Error %d disabling MAC port\n", |
| dev->name, err); |
| priv->broken_disableport = 1; |
| } |
| } |
| hermes_set_irqmask(hw, 0); |
| hermes_write_regn(hw, EVACK, 0xffff); |
| } |
| |
| /* firmware will have to reassociate */ |
| netif_carrier_off(dev); |
| priv->last_linkstatus = 0xffff; |
| |
| return 0; |
| } |
| |
| static int orinoco_allocate_fid(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct hermes *hw = &priv->hw; |
| int err; |
| |
| err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); |
| if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) { |
| /* Try workaround for old Symbol firmware bug */ |
| printk(KERN_WARNING "%s: firmware ALLOC bug detected " |
| "(old Symbol firmware?). Trying to work around... ", |
| dev->name); |
| |
| priv->nicbuf_size = TX_NICBUF_SIZE_BUG; |
| err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); |
| if (err) |
| printk("failed!\n"); |
| else |
| printk("ok.\n"); |
| } |
| |
| return err; |
| } |
| |
| int orinoco_reinit_firmware(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct hermes *hw = &priv->hw; |
| int err; |
| |
| err = hermes_init(hw); |
| if (!err) |
| err = orinoco_allocate_fid(dev); |
| |
| return err; |
| } |
| |
| static int __orinoco_hw_set_bitrate(struct orinoco_private *priv) |
| { |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| |
| if (priv->bitratemode >= BITRATE_TABLE_SIZE) { |
| printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n", |
| priv->ndev->name, priv->bitratemode); |
| return -EINVAL; |
| } |
| |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFTXRATECONTROL, |
| bitrate_table[priv->bitratemode].agere_txratectrl); |
| break; |
| case FIRMWARE_TYPE_INTERSIL: |
| case FIRMWARE_TYPE_SYMBOL: |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFTXRATECONTROL, |
| bitrate_table[priv->bitratemode].intersil_txratectrl); |
| break; |
| default: |
| BUG(); |
| } |
| |
| return err; |
| } |
| |
| /* Set fixed AP address */ |
| static int __orinoco_hw_set_wap(struct orinoco_private *priv) |
| { |
| int roaming_flag; |
| int err = 0; |
| hermes_t *hw = &priv->hw; |
| |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: |
| /* not supported */ |
| break; |
| case FIRMWARE_TYPE_INTERSIL: |
| if (priv->bssid_fixed) |
| roaming_flag = 2; |
| else |
| roaming_flag = 1; |
| |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFROAMINGMODE, |
| roaming_flag); |
| break; |
| case FIRMWARE_TYPE_SYMBOL: |
| err = HERMES_WRITE_RECORD(hw, USER_BAP, |
| HERMES_RID_CNFMANDATORYBSSID_SYMBOL, |
| &priv->desired_bssid); |
| break; |
| } |
| return err; |
| } |
| |
| /* Change the WEP keys and/or the current keys. Can be called |
| * either from __orinoco_hw_setup_wep() or directly from |
| * orinoco_ioctl_setiwencode(). In the later case the association |
| * with the AP is not broken (if the firmware can handle it), |
| * which is needed for 802.1x implementations. */ |
| static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) |
| { |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: |
| err = HERMES_WRITE_RECORD(hw, USER_BAP, |
| HERMES_RID_CNFWEPKEYS_AGERE, |
| &priv->keys); |
| if (err) |
| return err; |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFTXKEY_AGERE, |
| priv->tx_key); |
| if (err) |
| return err; |
| break; |
| case FIRMWARE_TYPE_INTERSIL: |
| case FIRMWARE_TYPE_SYMBOL: |
| { |
| int keylen; |
| int i; |
| |
| /* Force uniform key length to work around firmware bugs */ |
| keylen = le16_to_cpu(priv->keys[priv->tx_key].len); |
| |
| if (keylen > LARGE_KEY_SIZE) { |
| printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n", |
| priv->ndev->name, priv->tx_key, keylen); |
| return -E2BIG; |
| } |
| |
| /* Write all 4 keys */ |
| for(i = 0; i < ORINOCO_MAX_KEYS; i++) { |
| err = hermes_write_ltv(hw, USER_BAP, |
| HERMES_RID_CNFDEFAULTKEY0 + i, |
| HERMES_BYTES_TO_RECLEN(keylen), |
| priv->keys[i].data); |
| if (err) |
| return err; |
| } |
| |
| /* Write the index of the key used in transmission */ |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFWEPDEFAULTKEYID, |
| priv->tx_key); |
| if (err) |
| return err; |
| } |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int __orinoco_hw_setup_wep(struct orinoco_private *priv) |
| { |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| int master_wep_flag; |
| int auth_flag; |
| |
| if (priv->wep_on) |
| __orinoco_hw_setup_wepkeys(priv); |
| |
| if (priv->wep_restrict) |
| auth_flag = HERMES_AUTH_SHARED_KEY; |
| else |
| auth_flag = HERMES_AUTH_OPEN; |
| |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ |
| if (priv->wep_on) { |
| /* Enable the shared-key authentication. */ |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFAUTHENTICATION_AGERE, |
| auth_flag); |
| } |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFWEPENABLED_AGERE, |
| priv->wep_on); |
| if (err) |
| return err; |
| break; |
| |
| case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ |
| case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ |
| if (priv->wep_on) { |
| if (priv->wep_restrict || |
| (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) |
| master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | |
| HERMES_WEP_EXCL_UNENCRYPTED; |
| else |
| master_wep_flag = HERMES_WEP_PRIVACY_INVOKED; |
| |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFAUTHENTICATION, |
| auth_flag); |
| if (err) |
| return err; |
| } else |
| master_wep_flag = 0; |
| |
| if (priv->iw_mode == IW_MODE_MONITOR) |
| master_wep_flag |= HERMES_WEP_HOST_DECRYPT; |
| |
| /* Master WEP setting : on/off */ |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFWEPFLAGS_INTERSIL, |
| master_wep_flag); |
| if (err) |
| return err; |
| |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int __orinoco_program_rids(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err; |
| struct hermes_idstring idbuf; |
| |
| /* Set the MAC address */ |
| err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, |
| HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting MAC address\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set up the link mode */ |
| err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE, |
| priv->port_type); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting port type\n", |
| dev->name, err); |
| return err; |
| } |
| /* Set the channel/frequency */ |
| if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) { |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFOWNCHANNEL, |
| priv->channel); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting channel %d\n", |
| dev->name, err, priv->channel); |
| return err; |
| } |
| } |
| |
| if (priv->has_ibss) { |
| u16 createibss; |
| |
| if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) { |
| printk(KERN_WARNING "%s: This firmware requires an " |
| "ESSID in IBSS-Ad-Hoc mode.\n", dev->name); |
| /* With wvlan_cs, in this case, we would crash. |
| * hopefully, this driver will behave better... |
| * Jean II */ |
| createibss = 0; |
| } else { |
| createibss = priv->createibss; |
| } |
| |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFCREATEIBSS, |
| createibss); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", |
| dev->name, err); |
| return err; |
| } |
| } |
| |
| /* Set the desired BSSID */ |
| err = __orinoco_hw_set_wap(priv); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting AP address\n", |
| dev->name, err); |
| return err; |
| } |
| /* Set the desired ESSID */ |
| idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); |
| memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); |
| /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */ |
| err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, |
| HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), |
| &idbuf); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting OWNSSID\n", |
| dev->name, err); |
| return err; |
| } |
| err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, |
| HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), |
| &idbuf); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set the station name */ |
| idbuf.len = cpu_to_le16(strlen(priv->nick)); |
| memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val)); |
| err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, |
| HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2), |
| &idbuf); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting nickname\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set AP density */ |
| if (priv->has_sensitivity) { |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFSYSTEMSCALE, |
| priv->ap_density); |
| if (err) { |
| printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. " |
| "Disabling sensitivity control\n", |
| dev->name, err); |
| |
| priv->has_sensitivity = 0; |
| } |
| } |
| |
| /* Set RTS threshold */ |
| err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, |
| priv->rts_thresh); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting RTS threshold\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set fragmentation threshold or MWO robustness */ |
| if (priv->has_mwo) |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMWOROBUST_AGERE, |
| priv->mwo_robust); |
| else |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, |
| priv->frag_thresh); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting fragmentation\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set bitrate */ |
| err = __orinoco_hw_set_bitrate(priv); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting bitrate\n", |
| dev->name, err); |
| return err; |
| } |
| |
| /* Set power management */ |
| if (priv->has_pm) { |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPMENABLED, |
| priv->pm_on); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting up PM\n", |
| dev->name, err); |
| return err; |
| } |
| |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMULTICASTRECEIVE, |
| priv->pm_mcast); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting up PM\n", |
| dev->name, err); |
| return err; |
| } |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMAXSLEEPDURATION, |
| priv->pm_period); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting up PM\n", |
| dev->name, err); |
| return err; |
| } |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPMHOLDOVERDURATION, |
| priv->pm_timeout); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting up PM\n", |
| dev->name, err); |
| return err; |
| } |
| } |
| |
| /* Set preamble - only for Symbol so far... */ |
| if (priv->has_preamble) { |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPREAMBLE_SYMBOL, |
| priv->preamble); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting preamble\n", |
| dev->name, err); |
| return err; |
| } |
| } |
| |
| /* Set up encryption */ |
| if (priv->has_wep) { |
| err = __orinoco_hw_setup_wep(priv); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d activating WEP\n", |
| dev->name, err); |
| return err; |
| } |
| } |
| |
| if (priv->iw_mode == IW_MODE_MONITOR) { |
| /* Enable monitor mode */ |
| dev->type = ARPHRD_IEEE80211; |
| err = hermes_docmd_wait(hw, HERMES_CMD_TEST | |
| HERMES_TEST_MONITOR, 0, NULL); |
| } else { |
| /* Disable monitor mode */ |
| dev->type = ARPHRD_ETHER; |
| err = hermes_docmd_wait(hw, HERMES_CMD_TEST | |
| HERMES_TEST_STOP, 0, NULL); |
| } |
| if (err) |
| return err; |
| |
| /* Set promiscuity / multicast*/ |
| priv->promiscuous = 0; |
| priv->mc_count = 0; |
| |
| /* FIXME: what about netif_tx_lock */ |
| __orinoco_set_multicast_list(dev); |
| |
| return 0; |
| } |
| |
| /* FIXME: return int? */ |
| static void |
| __orinoco_set_multicast_list(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| int promisc, mc_count; |
| |
| /* The Hermes doesn't seem to have an allmulti mode, so we go |
| * into promiscuous mode and let the upper levels deal. */ |
| if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) || |
| (dev->mc_count > MAX_MULTICAST(priv)) ) { |
| promisc = 1; |
| mc_count = 0; |
| } else { |
| promisc = 0; |
| mc_count = dev->mc_count; |
| } |
| |
| if (promisc != priv->promiscuous) { |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPROMISCUOUSMODE, |
| promisc); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n", |
| dev->name, err); |
| } else |
| priv->promiscuous = promisc; |
| } |
| |
| /* If we're not in promiscuous mode, then we need to set the |
| * group address if either we want to multicast, or if we were |
| * multicasting and want to stop */ |
| if (! promisc && (mc_count || priv->mc_count) ) { |
| struct dev_mc_list *p = dev->mc_list; |
| struct hermes_multicast mclist; |
| int i; |
| |
| for (i = 0; i < mc_count; i++) { |
| /* paranoia: is list shorter than mc_count? */ |
| BUG_ON(! p); |
| /* paranoia: bad address size in list? */ |
| BUG_ON(p->dmi_addrlen != ETH_ALEN); |
| |
| memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN); |
| p = p->next; |
| } |
| |
| if (p) |
| printk(KERN_WARNING "%s: Multicast list is " |
| "longer than mc_count\n", dev->name); |
| |
| err = hermes_write_ltv(hw, USER_BAP, |
| HERMES_RID_CNFGROUPADDRESSES, |
| HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN), |
| &mclist); |
| if (err) |
| printk(KERN_ERR "%s: Error %d setting multicast list.\n", |
| dev->name, err); |
| else |
| priv->mc_count = mc_count; |
| } |
| } |
| |
| /* This must be called from user context, without locks held - use |
| * schedule_work() */ |
| static void orinoco_reset(struct work_struct *work) |
| { |
| struct orinoco_private *priv = |
| container_of(work, struct orinoco_private, reset_work); |
| struct net_device *dev = priv->ndev; |
| struct hermes *hw = &priv->hw; |
| int err; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| /* When the hardware becomes available again, whatever |
| * detects that is responsible for re-initializing |
| * it. So no need for anything further */ |
| return; |
| |
| netif_stop_queue(dev); |
| |
| /* Shut off interrupts. Depending on what state the hardware |
| * is in, this might not work, but we'll try anyway */ |
| hermes_set_irqmask(hw, 0); |
| hermes_write_regn(hw, EVACK, 0xffff); |
| |
| priv->hw_unavailable++; |
| priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */ |
| netif_carrier_off(dev); |
| |
| orinoco_unlock(priv, &flags); |
| |
| /* Scanning support: Cleanup of driver struct */ |
| orinoco_clear_scan_results(priv, 0); |
| priv->scan_inprogress = 0; |
| |
| if (priv->hard_reset) { |
| err = (*priv->hard_reset)(priv); |
| if (err) { |
| printk(KERN_ERR "%s: orinoco_reset: Error %d " |
| "performing hard reset\n", dev->name, err); |
| goto disable; |
| } |
| } |
| |
| err = orinoco_reinit_firmware(dev); |
| if (err) { |
| printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", |
| dev->name, err); |
| goto disable; |
| } |
| |
| spin_lock_irq(&priv->lock); /* This has to be called from user context */ |
| |
| priv->hw_unavailable--; |
| |
| /* priv->open or priv->hw_unavailable might have changed while |
| * we dropped the lock */ |
| if (priv->open && (! priv->hw_unavailable)) { |
| err = __orinoco_up(dev); |
| if (err) { |
| printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n", |
| dev->name, err); |
| } else |
| dev->trans_start = jiffies; |
| } |
| |
| spin_unlock_irq(&priv->lock); |
| |
| return; |
| disable: |
| hermes_set_irqmask(hw, 0); |
| netif_device_detach(dev); |
| printk(KERN_ERR "%s: Device has been disabled!\n", dev->name); |
| } |
| |
| /********************************************************************/ |
| /* Interrupt handler */ |
| /********************************************************************/ |
| |
| static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw) |
| { |
| printk(KERN_DEBUG "%s: TICK\n", dev->name); |
| } |
| |
| static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw) |
| { |
| /* This seems to happen a fair bit under load, but ignoring it |
| seems to work fine...*/ |
| printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n", |
| dev->name); |
| } |
| |
| irqreturn_t orinoco_interrupt(int irq, void *dev_id) |
| { |
| struct net_device *dev = dev_id; |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int count = MAX_IRQLOOPS_PER_IRQ; |
| u16 evstat, events; |
| /* These are used to detect a runaway interrupt situation */ |
| /* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy, |
| * we panic and shut down the hardware */ |
| static int last_irq_jiffy = 0; /* jiffies value the last time |
| * we were called */ |
| static int loops_this_jiffy = 0; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) { |
| /* If hw is unavailable - we don't know if the irq was |
| * for us or not */ |
| return IRQ_HANDLED; |
| } |
| |
| evstat = hermes_read_regn(hw, EVSTAT); |
| events = evstat & hw->inten; |
| if (! events) { |
| orinoco_unlock(priv, &flags); |
| return IRQ_NONE; |
| } |
| |
| if (jiffies != last_irq_jiffy) |
| loops_this_jiffy = 0; |
| last_irq_jiffy = jiffies; |
| |
| while (events && count--) { |
| if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) { |
| printk(KERN_WARNING "%s: IRQ handler is looping too " |
| "much! Resetting.\n", dev->name); |
| /* Disable interrupts for now */ |
| hermes_set_irqmask(hw, 0); |
| schedule_work(&priv->reset_work); |
| break; |
| } |
| |
| /* Check the card hasn't been removed */ |
| if (! hermes_present(hw)) { |
| DEBUG(0, "orinoco_interrupt(): card removed\n"); |
| break; |
| } |
| |
| if (events & HERMES_EV_TICK) |
| __orinoco_ev_tick(dev, hw); |
| if (events & HERMES_EV_WTERR) |
| __orinoco_ev_wterr(dev, hw); |
| if (events & HERMES_EV_INFDROP) |
| __orinoco_ev_infdrop(dev, hw); |
| if (events & HERMES_EV_INFO) |
| __orinoco_ev_info(dev, hw); |
| if (events & HERMES_EV_RX) |
| __orinoco_ev_rx(dev, hw); |
| if (events & HERMES_EV_TXEXC) |
| __orinoco_ev_txexc(dev, hw); |
| if (events & HERMES_EV_TX) |
| __orinoco_ev_tx(dev, hw); |
| if (events & HERMES_EV_ALLOC) |
| __orinoco_ev_alloc(dev, hw); |
| |
| hermes_write_regn(hw, EVACK, evstat); |
| |
| evstat = hermes_read_regn(hw, EVSTAT); |
| events = evstat & hw->inten; |
| }; |
| |
| orinoco_unlock(priv, &flags); |
| return IRQ_HANDLED; |
| } |
| |
| /********************************************************************/ |
| /* Initialization */ |
| /********************************************************************/ |
| |
| struct comp_id { |
| u16 id, variant, major, minor; |
| } __attribute__ ((packed)); |
| |
| static inline fwtype_t determine_firmware_type(struct comp_id *nic_id) |
| { |
| if (nic_id->id < 0x8000) |
| return FIRMWARE_TYPE_AGERE; |
| else if (nic_id->id == 0x8000 && nic_id->major == 0) |
| return FIRMWARE_TYPE_SYMBOL; |
| else |
| return FIRMWARE_TYPE_INTERSIL; |
| } |
| |
| /* Set priv->firmware type, determine firmware properties */ |
| static int determine_firmware(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err; |
| struct comp_id nic_id, sta_id; |
| unsigned int firmver; |
| char tmp[SYMBOL_MAX_VER_LEN+1] __attribute__((aligned(2))); |
| |
| /* Get the hardware version */ |
| err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id); |
| if (err) { |
| printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n", |
| dev->name, err); |
| return err; |
| } |
| |
| le16_to_cpus(&nic_id.id); |
| le16_to_cpus(&nic_id.variant); |
| le16_to_cpus(&nic_id.major); |
| le16_to_cpus(&nic_id.minor); |
| printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n", |
| dev->name, nic_id.id, nic_id.variant, |
| nic_id.major, nic_id.minor); |
| |
| priv->firmware_type = determine_firmware_type(&nic_id); |
| |
| /* Get the firmware version */ |
| err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id); |
| if (err) { |
| printk(KERN_ERR "%s: Cannot read station identity: error %d\n", |
| dev->name, err); |
| return err; |
| } |
| |
| le16_to_cpus(&sta_id.id); |
| le16_to_cpus(&sta_id.variant); |
| le16_to_cpus(&sta_id.major); |
| le16_to_cpus(&sta_id.minor); |
| printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n", |
| dev->name, sta_id.id, sta_id.variant, |
| sta_id.major, sta_id.minor); |
| |
| switch (sta_id.id) { |
| case 0x15: |
| printk(KERN_ERR "%s: Primary firmware is active\n", |
| dev->name); |
| return -ENODEV; |
| case 0x14b: |
| printk(KERN_ERR "%s: Tertiary firmware is active\n", |
| dev->name); |
| return -ENODEV; |
| case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */ |
| case 0x21: /* Symbol Spectrum24 Trilogy */ |
| break; |
| default: |
| printk(KERN_NOTICE "%s: Unknown station ID, please report\n", |
| dev->name); |
| break; |
| } |
| |
| /* Default capabilities */ |
| priv->has_sensitivity = 1; |
| priv->has_mwo = 0; |
| priv->has_preamble = 0; |
| priv->has_port3 = 1; |
| priv->has_ibss = 1; |
| priv->has_wep = 0; |
| priv->has_big_wep = 0; |
| |
| /* Determine capabilities from the firmware version */ |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: |
| /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout, |
| ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */ |
| snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, |
| "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor); |
| |
| firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor; |
| |
| priv->has_ibss = (firmver >= 0x60006); |
| priv->has_wep = (firmver >= 0x40020); |
| priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell |
| Gold cards from the others? */ |
| priv->has_mwo = (firmver >= 0x60000); |
| priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ |
| priv->ibss_port = 1; |
| priv->has_hostscan = (firmver >= 0x8000a); |
| priv->broken_monitor = (firmver >= 0x80000); |
| |
| /* Tested with Agere firmware : |
| * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II |
| * Tested CableTron firmware : 4.32 => Anton */ |
| break; |
| case FIRMWARE_TYPE_SYMBOL: |
| /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */ |
| /* Intel MAC : 00:02:B3:* */ |
| /* 3Com MAC : 00:50:DA:* */ |
| memset(tmp, 0, sizeof(tmp)); |
| /* Get the Symbol firmware version */ |
| err = hermes_read_ltv(hw, USER_BAP, |
| HERMES_RID_SECONDARYVERSION_SYMBOL, |
| SYMBOL_MAX_VER_LEN, NULL, &tmp); |
| if (err) { |
| printk(KERN_WARNING |
| "%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n", |
| dev->name, err); |
| firmver = 0; |
| tmp[0] = '\0'; |
| } else { |
| /* The firmware revision is a string, the format is |
| * something like : "V2.20-01". |
| * Quick and dirty parsing... - Jean II |
| */ |
| firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12) |
| | ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4) |
| | (tmp[7] - '0'); |
| |
| tmp[SYMBOL_MAX_VER_LEN] = '\0'; |
| } |
| |
| snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, |
| "Symbol %s", tmp); |
| |
| priv->has_ibss = (firmver >= 0x20000); |
| priv->has_wep = (firmver >= 0x15012); |
| priv->has_big_wep = (firmver >= 0x20000); |
| priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) || |
| (firmver >= 0x29000 && firmver < 0x30000) || |
| firmver >= 0x31000; |
| priv->has_preamble = (firmver >= 0x20000); |
| priv->ibss_port = 4; |
| priv->broken_disableport = (firmver == 0x25013) || |
| (firmver >= 0x30000 && firmver <= 0x31000); |
| priv->has_hostscan = (firmver >= 0x31001) || |
| (firmver >= 0x29057 && firmver < 0x30000); |
| /* Tested with Intel firmware : 0x20015 => Jean II */ |
| /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ |
| break; |
| case FIRMWARE_TYPE_INTERSIL: |
| /* D-Link, Linksys, Adtron, ZoomAir, and many others... |
| * Samsung, Compaq 100/200 and Proxim are slightly |
| * different and less well tested */ |
| /* D-Link MAC : 00:40:05:* */ |
| /* Addtron MAC : 00:90:D1:* */ |
| snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, |
| "Intersil %d.%d.%d", sta_id.major, sta_id.minor, |
| sta_id.variant); |
| |
| firmver = ((unsigned long)sta_id.major << 16) | |
| ((unsigned long)sta_id.minor << 8) | sta_id.variant; |
| |
| priv->has_ibss = (firmver >= 0x000700); /* FIXME */ |
| priv->has_big_wep = priv->has_wep = (firmver >= 0x000800); |
| priv->has_pm = (firmver >= 0x000700); |
| priv->has_hostscan = (firmver >= 0x010301); |
| |
| if (firmver >= 0x000800) |
| priv->ibss_port = 0; |
| else { |
| printk(KERN_NOTICE "%s: Intersil firmware earlier " |
| "than v0.8.x - several features not supported\n", |
| dev->name); |
| priv->ibss_port = 1; |
| } |
| break; |
| } |
| printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name, |
| priv->fw_name); |
| |
| return 0; |
| } |
| |
| static int orinoco_init(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| struct hermes_idstring nickbuf; |
| u16 reclen; |
| int len; |
| DECLARE_MAC_BUF(mac); |
| |
| /* No need to lock, the hw_unavailable flag is already set in |
| * alloc_orinocodev() */ |
| priv->nicbuf_size = IEEE80211_FRAME_LEN + ETH_HLEN; |
| |
| /* Initialize the firmware */ |
| err = hermes_init(hw); |
| if (err != 0) { |
| printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n", |
| dev->name, err); |
| goto out; |
| } |
| |
| err = determine_firmware(dev); |
| if (err != 0) { |
| printk(KERN_ERR "%s: Incompatible firmware, aborting\n", |
| dev->name); |
| goto out; |
| } |
| |
| if (priv->has_port3) |
| printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name); |
| if (priv->has_ibss) |
| printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n", |
| dev->name); |
| if (priv->has_wep) { |
| printk(KERN_DEBUG "%s: WEP supported, ", dev->name); |
| if (priv->has_big_wep) |
| printk("104-bit key\n"); |
| else |
| printk("40-bit key\n"); |
| } |
| |
| /* Get the MAC address */ |
| err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, |
| ETH_ALEN, NULL, dev->dev_addr); |
| if (err) { |
| printk(KERN_WARNING "%s: failed to read MAC address!\n", |
| dev->name); |
| goto out; |
| } |
| |
| printk(KERN_DEBUG "%s: MAC address %s\n", |
| dev->name, print_mac(mac, dev->dev_addr)); |
| |
| /* Get the station name */ |
| err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, |
| sizeof(nickbuf), &reclen, &nickbuf); |
| if (err) { |
| printk(KERN_ERR "%s: failed to read station name\n", |
| dev->name); |
| goto out; |
| } |
| if (nickbuf.len) |
| len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len)); |
| else |
| len = min(IW_ESSID_MAX_SIZE, 2 * reclen); |
| memcpy(priv->nick, &nickbuf.val, len); |
| priv->nick[len] = '\0'; |
| |
| printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick); |
| |
| err = orinoco_allocate_fid(dev); |
| if (err) { |
| printk(KERN_ERR "%s: failed to allocate NIC buffer!\n", |
| dev->name); |
| goto out; |
| } |
| |
| /* Get allowed channels */ |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST, |
| &priv->channel_mask); |
| if (err) { |
| printk(KERN_ERR "%s: failed to read channel list!\n", |
| dev->name); |
| goto out; |
| } |
| |
| /* Get initial AP density */ |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE, |
| &priv->ap_density); |
| if (err || priv->ap_density < 1 || priv->ap_density > 3) { |
| priv->has_sensitivity = 0; |
| } |
| |
| /* Get initial RTS threshold */ |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, |
| &priv->rts_thresh); |
| if (err) { |
| printk(KERN_ERR "%s: failed to read RTS threshold!\n", |
| dev->name); |
| goto out; |
| } |
| |
| /* Get initial fragmentation settings */ |
| if (priv->has_mwo) |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMWOROBUST_AGERE, |
| &priv->mwo_robust); |
| else |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, |
| &priv->frag_thresh); |
| if (err) { |
| printk(KERN_ERR "%s: failed to read fragmentation settings!\n", |
| dev->name); |
| goto out; |
| } |
| |
| /* Power management setup */ |
| if (priv->has_pm) { |
| priv->pm_on = 0; |
| priv->pm_mcast = 1; |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMAXSLEEPDURATION, |
| &priv->pm_period); |
| if (err) { |
| printk(KERN_ERR "%s: failed to read power management period!\n", |
| dev->name); |
| goto out; |
| } |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPMHOLDOVERDURATION, |
| &priv->pm_timeout); |
| if (err) { |
| printk(KERN_ERR "%s: failed to read power management timeout!\n", |
| dev->name); |
| goto out; |
| } |
| } |
| |
| /* Preamble setup */ |
| if (priv->has_preamble) { |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFPREAMBLE_SYMBOL, |
| &priv->preamble); |
| if (err) |
| goto out; |
| } |
| |
| /* Set up the default configuration */ |
| priv->iw_mode = IW_MODE_INFRA; |
| /* By default use IEEE/IBSS ad-hoc mode if we have it */ |
| priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss); |
| set_port_type(priv); |
| priv->channel = 0; /* use firmware default */ |
| |
| priv->promiscuous = 0; |
| priv->wep_on = 0; |
| priv->tx_key = 0; |
| |
| /* Make the hardware available, as long as it hasn't been |
| * removed elsewhere (e.g. by PCMCIA hot unplug) */ |
| spin_lock_irq(&priv->lock); |
| priv->hw_unavailable--; |
| spin_unlock_irq(&priv->lock); |
| |
| printk(KERN_DEBUG "%s: ready\n", dev->name); |
| |
| out: |
| return err; |
| } |
| |
| struct net_device *alloc_orinocodev(int sizeof_card, |
| int (*hard_reset)(struct orinoco_private *)) |
| { |
| struct net_device *dev; |
| struct orinoco_private *priv; |
| |
| dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card); |
| if (! dev) |
| return NULL; |
| priv = netdev_priv(dev); |
| priv->ndev = dev; |
| if (sizeof_card) |
| priv->card = (void *)((unsigned long)priv |
| + sizeof(struct orinoco_private)); |
| else |
| priv->card = NULL; |
| |
| if (orinoco_bss_data_allocate(priv)) |
| goto err_out_free; |
| orinoco_bss_data_init(priv); |
| |
| /* Setup / override net_device fields */ |
| dev->init = orinoco_init; |
| dev->hard_start_xmit = orinoco_xmit; |
| dev->tx_timeout = orinoco_tx_timeout; |
| dev->watchdog_timeo = HZ; /* 1 second timeout */ |
| dev->get_stats = orinoco_get_stats; |
| dev->ethtool_ops = &orinoco_ethtool_ops; |
| dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def; |
| #ifdef WIRELESS_SPY |
| priv->wireless_data.spy_data = &priv->spy_data; |
| dev->wireless_data = &priv->wireless_data; |
| #endif |
| dev->change_mtu = orinoco_change_mtu; |
| dev->set_multicast_list = orinoco_set_multicast_list; |
| /* we use the default eth_mac_addr for setting the MAC addr */ |
| |
| /* Set up default callbacks */ |
| dev->open = orinoco_open; |
| dev->stop = orinoco_stop; |
| priv->hard_reset = hard_reset; |
| |
| spin_lock_init(&priv->lock); |
| priv->open = 0; |
| priv->hw_unavailable = 1; /* orinoco_init() must clear this |
| * before anything else touches the |
| * hardware */ |
| INIT_WORK(&priv->reset_work, orinoco_reset); |
| INIT_WORK(&priv->join_work, orinoco_join_ap); |
| INIT_WORK(&priv->wevent_work, orinoco_send_wevents); |
| |
| netif_carrier_off(dev); |
| priv->last_linkstatus = 0xffff; |
| |
| return dev; |
| |
| err_out_free: |
| free_netdev(dev); |
| return NULL; |
| } |
| |
| void free_orinocodev(struct net_device *dev) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| |
| orinoco_bss_data_free(priv); |
| free_netdev(dev); |
| } |
| |
| /********************************************************************/ |
| /* Wireless extensions */ |
| /********************************************************************/ |
| |
| /* Return : < 0 -> error code ; >= 0 -> length */ |
| static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, |
| char buf[IW_ESSID_MAX_SIZE+1]) |
| { |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| struct hermes_idstring essidbuf; |
| char *p = (char *)(&essidbuf.val); |
| int len; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| if (strlen(priv->desired_essid) > 0) { |
| /* We read the desired SSID from the hardware rather |
| than from priv->desired_essid, just in case the |
| firmware is allowed to change it on us. I'm not |
| sure about this */ |
| /* My guess is that the OWNSSID should always be whatever |
| * we set to the card, whereas CURRENT_SSID is the one that |
| * may change... - Jean II */ |
| u16 rid; |
| |
| *active = 1; |
| |
| rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID : |
| HERMES_RID_CNFDESIREDSSID; |
| |
| err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), |
| NULL, &essidbuf); |
| if (err) |
| goto fail_unlock; |
| } else { |
| *active = 0; |
| |
| err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, |
| sizeof(essidbuf), NULL, &essidbuf); |
| if (err) |
| goto fail_unlock; |
| } |
| |
| len = le16_to_cpu(essidbuf.len); |
| BUG_ON(len > IW_ESSID_MAX_SIZE); |
| |
| memset(buf, 0, IW_ESSID_MAX_SIZE); |
| memcpy(buf, p, len); |
| err = len; |
| |
| fail_unlock: |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static long orinoco_hw_get_freq(struct orinoco_private *priv) |
| { |
| |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| u16 channel; |
| long freq = 0; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel); |
| if (err) |
| goto out; |
| |
| /* Intersil firmware 1.3.5 returns 0 when the interface is down */ |
| if (channel == 0) { |
| err = -EBUSY; |
| goto out; |
| } |
| |
| if ( (channel < 1) || (channel > NUM_CHANNELS) ) { |
| printk(KERN_WARNING "%s: Channel out of range (%d)!\n", |
| priv->ndev->name, channel); |
| err = -EBUSY; |
| goto out; |
| |
| } |
| freq = channel_frequency[channel-1] * 100000; |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| |
| if (err > 0) |
| err = -EBUSY; |
| return err ? err : freq; |
| } |
| |
| static int orinoco_hw_get_bitratelist(struct orinoco_private *priv, |
| int *numrates, s32 *rates, int max) |
| { |
| hermes_t *hw = &priv->hw; |
| struct hermes_idstring list; |
| unsigned char *p = (unsigned char *)&list.val; |
| int err = 0; |
| int num; |
| int i; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, |
| sizeof(list), NULL, &list); |
| orinoco_unlock(priv, &flags); |
| |
| if (err) |
| return err; |
| |
| num = le16_to_cpu(list.len); |
| *numrates = num; |
| num = min(num, max); |
| |
| for (i = 0; i < num; i++) { |
| rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */ |
| } |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_getname(struct net_device *dev, |
| struct iw_request_info *info, |
| char *name, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int numrates; |
| int err; |
| |
| err = orinoco_hw_get_bitratelist(priv, &numrates, NULL, 0); |
| |
| if (!err && (numrates > 2)) |
| strcpy(name, "IEEE 802.11b"); |
| else |
| strcpy(name, "IEEE 802.11-DS"); |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setwap(struct net_device *dev, |
| struct iw_request_info *info, |
| struct sockaddr *ap_addr, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int err = -EINPROGRESS; /* Call commit handler */ |
| unsigned long flags; |
| static const u8 off_addr[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; |
| static const u8 any_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| /* Enable automatic roaming - no sanity checks are needed */ |
| if (memcmp(&ap_addr->sa_data, off_addr, ETH_ALEN) == 0 || |
| memcmp(&ap_addr->sa_data, any_addr, ETH_ALEN) == 0) { |
| priv->bssid_fixed = 0; |
| memset(priv->desired_bssid, 0, ETH_ALEN); |
| |
| /* "off" means keep existing connection */ |
| if (ap_addr->sa_data[0] == 0) { |
| __orinoco_hw_set_wap(priv); |
| err = 0; |
| } |
| goto out; |
| } |
| |
| if (priv->firmware_type == FIRMWARE_TYPE_AGERE) { |
| printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't " |
| "support manual roaming\n", |
| dev->name); |
| err = -EOPNOTSUPP; |
| goto out; |
| } |
| |
| if (priv->iw_mode != IW_MODE_INFRA) { |
| printk(KERN_WARNING "%s: Manual roaming supported only in " |
| "managed mode\n", dev->name); |
| err = -EOPNOTSUPP; |
| goto out; |
| } |
| |
| /* Intersil firmware hangs without Desired ESSID */ |
| if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL && |
| strlen(priv->desired_essid) == 0) { |
| printk(KERN_WARNING "%s: Desired ESSID must be set for " |
| "manual roaming\n", dev->name); |
| err = -EOPNOTSUPP; |
| goto out; |
| } |
| |
| /* Finally, enable manual roaming */ |
| priv->bssid_fixed = 1; |
| memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN); |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| return err; |
| } |
| |
| static int orinoco_ioctl_getwap(struct net_device *dev, |
| struct iw_request_info *info, |
| struct sockaddr *ap_addr, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| ap_addr->sa_family = ARPHRD_ETHER; |
| err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, |
| ETH_ALEN, NULL, ap_addr->sa_data); |
| |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_setmode(struct net_device *dev, |
| struct iw_request_info *info, |
| u32 *mode, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int err = -EINPROGRESS; /* Call commit handler */ |
| unsigned long flags; |
| |
| if (priv->iw_mode == *mode) |
| return 0; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| switch (*mode) { |
| case IW_MODE_ADHOC: |
| if (!priv->has_ibss && !priv->has_port3) |
| err = -EOPNOTSUPP; |
| break; |
| |
| case IW_MODE_INFRA: |
| break; |
| |
| case IW_MODE_MONITOR: |
| if (priv->broken_monitor && !force_monitor) { |
| printk(KERN_WARNING "%s: Monitor mode support is " |
| "buggy in this firmware, not enabling\n", |
| dev->name); |
| err = -EOPNOTSUPP; |
| } |
| break; |
| |
| default: |
| err = -EOPNOTSUPP; |
| break; |
| } |
| |
| if (err == -EINPROGRESS) { |
| priv->iw_mode = *mode; |
| set_port_type(priv); |
| } |
| |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_getmode(struct net_device *dev, |
| struct iw_request_info *info, |
| u32 *mode, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| |
| *mode = priv->iw_mode; |
| return 0; |
| } |
| |
| static int orinoco_ioctl_getiwrange(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *rrq, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int err = 0; |
| struct iw_range *range = (struct iw_range *) extra; |
| int numrates; |
| int i, k; |
| |
| rrq->length = sizeof(struct iw_range); |
| memset(range, 0, sizeof(struct iw_range)); |
| |
| range->we_version_compiled = WIRELESS_EXT; |
| range->we_version_source = 14; |
| |
| /* Set available channels/frequencies */ |
| range->num_channels = NUM_CHANNELS; |
| k = 0; |
| for (i = 0; i < NUM_CHANNELS; i++) { |
| if (priv->channel_mask & (1 << i)) { |
| range->freq[k].i = i + 1; |
| range->freq[k].m = channel_frequency[i] * 100000; |
| range->freq[k].e = 1; |
| k++; |
| } |
| |
| if (k >= IW_MAX_FREQUENCIES) |
| break; |
| } |
| range->num_frequency = k; |
| range->sensitivity = 3; |
| |
| if (priv->has_wep) { |
| range->max_encoding_tokens = ORINOCO_MAX_KEYS; |
| range->encoding_size[0] = SMALL_KEY_SIZE; |
| range->num_encoding_sizes = 1; |
| |
| if (priv->has_big_wep) { |
| range->encoding_size[1] = LARGE_KEY_SIZE; |
| range->num_encoding_sizes = 2; |
| } |
| } |
| |
| if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){ |
| /* Quality stats meaningless in ad-hoc mode */ |
| } else { |
| range->max_qual.qual = 0x8b - 0x2f; |
| range->max_qual.level = 0x2f - 0x95 - 1; |
| range->max_qual.noise = 0x2f - 0x95 - 1; |
| /* Need to get better values */ |
| range->avg_qual.qual = 0x24; |
| range->avg_qual.level = 0xC2; |
| range->avg_qual.noise = 0x9E; |
| } |
| |
| err = orinoco_hw_get_bitratelist(priv, &numrates, |
| range->bitrate, IW_MAX_BITRATES); |
| if (err) |
| return err; |
| range->num_bitrates = numrates; |
| |
| /* Set an indication of the max TCP throughput in bit/s that we can |
| * expect using this interface. May be use for QoS stuff... |
| * Jean II */ |
| if (numrates > 2) |
| range->throughput = 5 * 1000 * 1000; /* ~5 Mb/s */ |
| else |
| range->throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */ |
| |
| range->min_rts = 0; |
| range->max_rts = 2347; |
| range->min_frag = 256; |
| range->max_frag = 2346; |
| |
| range->min_pmp = 0; |
| range->max_pmp = 65535000; |
| range->min_pmt = 0; |
| range->max_pmt = 65535 * 1000; /* ??? */ |
| range->pmp_flags = IW_POWER_PERIOD; |
| range->pmt_flags = IW_POWER_TIMEOUT; |
| range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R; |
| |
| range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME; |
| range->retry_flags = IW_RETRY_LIMIT; |
| range->r_time_flags = IW_RETRY_LIFETIME; |
| range->min_retry = 0; |
| range->max_retry = 65535; /* ??? */ |
| range->min_r_time = 0; |
| range->max_r_time = 65535 * 1000; /* ??? */ |
| |
| /* Event capability (kernel) */ |
| IW_EVENT_CAPA_SET_KERNEL(range->event_capa); |
| /* Event capability (driver) */ |
| IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY); |
| IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP); |
| IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN); |
| IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP); |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setiwencode(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *erq, |
| char *keybuf) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int index = (erq->flags & IW_ENCODE_INDEX) - 1; |
| int setindex = priv->tx_key; |
| int enable = priv->wep_on; |
| int restricted = priv->wep_restrict; |
| u16 xlen = 0; |
| int err = -EINPROGRESS; /* Call commit handler */ |
| unsigned long flags; |
| |
| if (! priv->has_wep) |
| return -EOPNOTSUPP; |
| |
| if (erq->pointer) { |
| /* We actually have a key to set - check its length */ |
| if (erq->length > LARGE_KEY_SIZE) |
| return -E2BIG; |
| |
| if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep ) |
| return -E2BIG; |
| } |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| if (erq->length > 0) { |
| if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) |
| index = priv->tx_key; |
| |
| /* Adjust key length to a supported value */ |
| if (erq->length > SMALL_KEY_SIZE) { |
| xlen = LARGE_KEY_SIZE; |
| } else if (erq->length > 0) { |
| xlen = SMALL_KEY_SIZE; |
| } else |
| xlen = 0; |
| |
| /* Switch on WEP if off */ |
| if ((!enable) && (xlen > 0)) { |
| setindex = index; |
| enable = 1; |
| } |
| } else { |
| /* Important note : if the user do "iwconfig eth0 enc off", |
| * we will arrive there with an index of -1. This is valid |
| * but need to be taken care off... Jean II */ |
| if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) { |
| if((index != -1) || (erq->flags == 0)) { |
| err = -EINVAL; |
| goto out; |
| } |
| } else { |
| /* Set the index : Check that the key is valid */ |
| if(priv->keys[index].len == 0) { |
| err = -EINVAL; |
| goto out; |
| } |
| setindex = index; |
| } |
| } |
| |
| if (erq->flags & IW_ENCODE_DISABLED) |
| enable = 0; |
| if (erq->flags & IW_ENCODE_OPEN) |
| restricted = 0; |
| if (erq->flags & IW_ENCODE_RESTRICTED) |
| restricted = 1; |
| |
| if (erq->pointer && erq->length > 0) { |
| priv->keys[index].len = cpu_to_le16(xlen); |
| memset(priv->keys[index].data, 0, |
| sizeof(priv->keys[index].data)); |
| memcpy(priv->keys[index].data, keybuf, erq->length); |
| } |
| priv->tx_key = setindex; |
| |
| /* Try fast key change if connected and only keys are changed */ |
| if (priv->wep_on && enable && (priv->wep_restrict == restricted) && |
| netif_carrier_ok(dev)) { |
| err = __orinoco_hw_setup_wepkeys(priv); |
| /* No need to commit if successful */ |
| goto out; |
| } |
| |
| priv->wep_on = enable; |
| priv->wep_restrict = restricted; |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_getiwencode(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *erq, |
| char *keybuf) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int index = (erq->flags & IW_ENCODE_INDEX) - 1; |
| u16 xlen = 0; |
| unsigned long flags; |
| |
| if (! priv->has_wep) |
| return -EOPNOTSUPP; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) |
| index = priv->tx_key; |
| |
| erq->flags = 0; |
| if (! priv->wep_on) |
| erq->flags |= IW_ENCODE_DISABLED; |
| erq->flags |= index + 1; |
| |
| if (priv->wep_restrict) |
| erq->flags |= IW_ENCODE_RESTRICTED; |
| else |
| erq->flags |= IW_ENCODE_OPEN; |
| |
| xlen = le16_to_cpu(priv->keys[index].len); |
| |
| erq->length = xlen; |
| |
| memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE); |
| |
| orinoco_unlock(priv, &flags); |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setessid(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *erq, |
| char *essidbuf) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| unsigned long flags; |
| |
| /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it |
| * anyway... - Jean II */ |
| |
| /* Hum... Should not use Wireless Extension constant (may change), |
| * should use our own... - Jean II */ |
| if (erq->length > IW_ESSID_MAX_SIZE) |
| return -E2BIG; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| /* NULL the string (for NULL termination & ESSID = ANY) - Jean II */ |
| memset(priv->desired_essid, 0, sizeof(priv->desired_essid)); |
| |
| /* If not ANY, get the new ESSID */ |
| if (erq->flags) { |
| memcpy(priv->desired_essid, essidbuf, erq->length); |
| } |
| |
| orinoco_unlock(priv, &flags); |
| |
| return -EINPROGRESS; /* Call commit handler */ |
| } |
| |
| static int orinoco_ioctl_getessid(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *erq, |
| char *essidbuf) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int active; |
| int err = 0; |
| unsigned long flags; |
| |
| if (netif_running(dev)) { |
| err = orinoco_hw_get_essid(priv, &active, essidbuf); |
| if (err < 0) |
| return err; |
| erq->length = err; |
| } else { |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE); |
| erq->length = strlen(priv->desired_essid); |
| orinoco_unlock(priv, &flags); |
| } |
| |
| erq->flags = 1; |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setnick(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *nrq, |
| char *nickbuf) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| unsigned long flags; |
| |
| if (nrq->length > IW_ESSID_MAX_SIZE) |
| return -E2BIG; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| memset(priv->nick, 0, sizeof(priv->nick)); |
| memcpy(priv->nick, nickbuf, nrq->length); |
| |
| orinoco_unlock(priv, &flags); |
| |
| return -EINPROGRESS; /* Call commit handler */ |
| } |
| |
| static int orinoco_ioctl_getnick(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *nrq, |
| char *nickbuf) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE); |
| orinoco_unlock(priv, &flags); |
| |
| nrq->length = strlen(priv->nick); |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setfreq(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_freq *frq, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int chan = -1; |
| unsigned long flags; |
| int err = -EINPROGRESS; /* Call commit handler */ |
| |
| /* In infrastructure mode the AP sets the channel */ |
| if (priv->iw_mode == IW_MODE_INFRA) |
| return -EBUSY; |
| |
| if ( (frq->e == 0) && (frq->m <= 1000) ) { |
| /* Setting by channel number */ |
| chan = frq->m; |
| } else { |
| /* Setting by frequency - search the table */ |
| int mult = 1; |
| int i; |
| |
| for (i = 0; i < (6 - frq->e); i++) |
| mult *= 10; |
| |
| for (i = 0; i < NUM_CHANNELS; i++) |
| if (frq->m == (channel_frequency[i] * mult)) |
| chan = i+1; |
| } |
| |
| if ( (chan < 1) || (chan > NUM_CHANNELS) || |
| ! (priv->channel_mask & (1 << (chan-1)) ) ) |
| return -EINVAL; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| priv->channel = chan; |
| if (priv->iw_mode == IW_MODE_MONITOR) { |
| /* Fast channel change - no commit if successful */ |
| hermes_t *hw = &priv->hw; |
| err = hermes_docmd_wait(hw, HERMES_CMD_TEST | |
| HERMES_TEST_SET_CHANNEL, |
| chan, NULL); |
| } |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_getfreq(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_freq *frq, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int tmp; |
| |
| /* Locking done in there */ |
| tmp = orinoco_hw_get_freq(priv); |
| if (tmp < 0) { |
| return tmp; |
| } |
| |
| frq->m = tmp; |
| frq->e = 1; |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_getsens(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *srq, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| u16 val; |
| int err; |
| unsigned long flags; |
| |
| if (!priv->has_sensitivity) |
| return -EOPNOTSUPP; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFSYSTEMSCALE, &val); |
| orinoco_unlock(priv, &flags); |
| |
| if (err) |
| return err; |
| |
| srq->value = val; |
| srq->fixed = 0; /* auto */ |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setsens(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *srq, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int val = srq->value; |
| unsigned long flags; |
| |
| if (!priv->has_sensitivity) |
| return -EOPNOTSUPP; |
| |
| if ((val < 1) || (val > 3)) |
| return -EINVAL; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| priv->ap_density = val; |
| orinoco_unlock(priv, &flags); |
| |
| return -EINPROGRESS; /* Call commit handler */ |
| } |
| |
| static int orinoco_ioctl_setrts(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rrq, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int val = rrq->value; |
| unsigned long flags; |
| |
| if (rrq->disabled) |
| val = 2347; |
| |
| if ( (val < 0) || (val > 2347) ) |
| return -EINVAL; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| priv->rts_thresh = val; |
| orinoco_unlock(priv, &flags); |
| |
| return -EINPROGRESS; /* Call commit handler */ |
| } |
| |
| static int orinoco_ioctl_getrts(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rrq, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| |
| rrq->value = priv->rts_thresh; |
| rrq->disabled = (rrq->value == 2347); |
| rrq->fixed = 1; |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setfrag(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *frq, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int err = -EINPROGRESS; /* Call commit handler */ |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| if (priv->has_mwo) { |
| if (frq->disabled) |
| priv->mwo_robust = 0; |
| else { |
| if (frq->fixed) |
| printk(KERN_WARNING "%s: Fixed fragmentation is " |
| "not supported on this firmware. " |
| "Using MWO robust instead.\n", dev->name); |
| priv->mwo_robust = 1; |
| } |
| } else { |
| if (frq->disabled) |
| priv->frag_thresh = 2346; |
| else { |
| if ( (frq->value < 256) || (frq->value > 2346) ) |
| err = -EINVAL; |
| else |
| priv->frag_thresh = frq->value & ~0x1; /* must be even */ |
| } |
| } |
| |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_getfrag(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *frq, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err; |
| u16 val; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| if (priv->has_mwo) { |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMWOROBUST_AGERE, |
| &val); |
| if (err) |
| val = 0; |
| |
| frq->value = val ? 2347 : 0; |
| frq->disabled = ! val; |
| frq->fixed = 0; |
| } else { |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, |
| &val); |
| if (err) |
| val = 0; |
| |
| frq->value = val; |
| frq->disabled = (val >= 2346); |
| frq->fixed = 1; |
| } |
| |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_setrate(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rrq, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int ratemode = -1; |
| int bitrate; /* 100s of kilobits */ |
| int i; |
| unsigned long flags; |
| |
| /* As the user space doesn't know our highest rate, it uses -1 |
| * to ask us to set the highest rate. Test it using "iwconfig |
| * ethX rate auto" - Jean II */ |
| if (rrq->value == -1) |
| bitrate = 110; |
| else { |
| if (rrq->value % 100000) |
| return -EINVAL; |
| bitrate = rrq->value / 100000; |
| } |
| |
| if ( (bitrate != 10) && (bitrate != 20) && |
| (bitrate != 55) && (bitrate != 110) ) |
| return -EINVAL; |
| |
| for (i = 0; i < BITRATE_TABLE_SIZE; i++) |
| if ( (bitrate_table[i].bitrate == bitrate) && |
| (bitrate_table[i].automatic == ! rrq->fixed) ) { |
| ratemode = i; |
| break; |
| } |
| |
| if (ratemode == -1) |
| return -EINVAL; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| priv->bitratemode = ratemode; |
| orinoco_unlock(priv, &flags); |
| |
| return -EINPROGRESS; |
| } |
| |
| static int orinoco_ioctl_getrate(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rrq, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| int ratemode; |
| int i; |
| u16 val; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| ratemode = priv->bitratemode; |
| |
| BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE)); |
| |
| rrq->value = bitrate_table[ratemode].bitrate * 100000; |
| rrq->fixed = ! bitrate_table[ratemode].automatic; |
| rrq->disabled = 0; |
| |
| /* If the interface is running we try to find more about the |
| current mode */ |
| if (netif_running(dev)) { |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CURRENTTXRATE, &val); |
| if (err) |
| goto out; |
| |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_AGERE: /* Lucent style rate */ |
| /* Note : in Lucent firmware, the return value of |
| * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s, |
| * and therefore is totally different from the |
| * encoding of HERMES_RID_CNFTXRATECONTROL. |
| * Don't forget that 6Mb/s is really 5.5Mb/s */ |
| if (val == 6) |
| rrq->value = 5500000; |
| else |
| rrq->value = val * 1000000; |
| break; |
| case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */ |
| case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */ |
| for (i = 0; i < BITRATE_TABLE_SIZE; i++) |
| if (bitrate_table[i].intersil_txratectrl == val) { |
| ratemode = i; |
| break; |
| } |
| if (i >= BITRATE_TABLE_SIZE) |
| printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n", |
| dev->name, val); |
| |
| rrq->value = bitrate_table[ratemode].bitrate * 100000; |
| break; |
| default: |
| BUG(); |
| } |
| } |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_setpower(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *prq, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int err = -EINPROGRESS; /* Call commit handler */ |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| if (prq->disabled) { |
| priv->pm_on = 0; |
| } else { |
| switch (prq->flags & IW_POWER_MODE) { |
| case IW_POWER_UNICAST_R: |
| priv->pm_mcast = 0; |
| priv->pm_on = 1; |
| break; |
| case IW_POWER_ALL_R: |
| priv->pm_mcast = 1; |
| priv->pm_on = 1; |
| break; |
| case IW_POWER_ON: |
| /* No flags : but we may have a value - Jean II */ |
| break; |
| default: |
| err = -EINVAL; |
| goto out; |
| } |
| |
| if (prq->flags & IW_POWER_TIMEOUT) { |
| priv->pm_on = 1; |
| priv->pm_timeout = prq->value / 1000; |
| } |
| if (prq->flags & IW_POWER_PERIOD) { |
| priv->pm_on = 1; |
| priv->pm_period = prq->value / 1000; |
| } |
| /* It's valid to not have a value if we are just toggling |
| * the flags... Jean II */ |
| if(!priv->pm_on) { |
| err = -EINVAL; |
| goto out; |
| } |
| } |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_getpower(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *prq, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| u16 enable, period, timeout, mcast; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable); |
| if (err) |
| goto out; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFMAXSLEEPDURATION, &period); |
| if (err) |
| goto out; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout); |
| if (err) |
| goto out; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast); |
| if (err) |
| goto out; |
| |
| prq->disabled = !enable; |
| /* Note : by default, display the period */ |
| if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { |
| prq->flags = IW_POWER_TIMEOUT; |
| prq->value = timeout * 1000; |
| } else { |
| prq->flags = IW_POWER_PERIOD; |
| prq->value = period * 1000; |
| } |
| if (mcast) |
| prq->flags |= IW_POWER_ALL_R; |
| else |
| prq->flags |= IW_POWER_UNICAST_R; |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_getretry(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *rrq, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| u16 short_limit, long_limit, lifetime; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT, |
| &short_limit); |
| if (err) |
| goto out; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT, |
| &long_limit); |
| if (err) |
| goto out; |
| |
| err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME, |
| &lifetime); |
| if (err) |
| goto out; |
| |
| rrq->disabled = 0; /* Can't be disabled */ |
| |
| /* Note : by default, display the retry number */ |
| if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { |
| rrq->flags = IW_RETRY_LIFETIME; |
| rrq->value = lifetime * 1000; /* ??? */ |
| } else { |
| /* By default, display the min number */ |
| if ((rrq->flags & IW_RETRY_LONG)) { |
| rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG; |
| rrq->value = long_limit; |
| } else { |
| rrq->flags = IW_RETRY_LIMIT; |
| rrq->value = short_limit; |
| if(short_limit != long_limit) |
| rrq->flags |= IW_RETRY_SHORT; |
| } |
| } |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_reset(struct net_device *dev, |
| struct iw_request_info *info, |
| void *wrqu, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| |
| if (! capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| |
| if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) { |
| printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name); |
| |
| /* Firmware reset */ |
| orinoco_reset(&priv->reset_work); |
| } else { |
| printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name); |
| |
| schedule_work(&priv->reset_work); |
| } |
| |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setibssport(struct net_device *dev, |
| struct iw_request_info *info, |
| void *wrqu, |
| char *extra) |
| |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int val = *( (int *) extra ); |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| priv->ibss_port = val ; |
| |
| /* Actually update the mode we are using */ |
| set_port_type(priv); |
| |
| orinoco_unlock(priv, &flags); |
| return -EINPROGRESS; /* Call commit handler */ |
| } |
| |
| static int orinoco_ioctl_getibssport(struct net_device *dev, |
| struct iw_request_info *info, |
| void *wrqu, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int *val = (int *) extra; |
| |
| *val = priv->ibss_port; |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setport3(struct net_device *dev, |
| struct iw_request_info *info, |
| void *wrqu, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int val = *( (int *) extra ); |
| int err = 0; |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| switch (val) { |
| case 0: /* Try to do IEEE ad-hoc mode */ |
| if (! priv->has_ibss) { |
| err = -EINVAL; |
| break; |
| } |
| priv->prefer_port3 = 0; |
| |
| break; |
| |
| case 1: /* Try to do Lucent proprietary ad-hoc mode */ |
| if (! priv->has_port3) { |
| err = -EINVAL; |
| break; |
| } |
| priv->prefer_port3 = 1; |
| break; |
| |
| default: |
| err = -EINVAL; |
| } |
| |
| if (! err) { |
| /* Actually update the mode we are using */ |
| set_port_type(priv); |
| err = -EINPROGRESS; |
| } |
| |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_ioctl_getport3(struct net_device *dev, |
| struct iw_request_info *info, |
| void *wrqu, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int *val = (int *) extra; |
| |
| *val = priv->prefer_port3; |
| return 0; |
| } |
| |
| static int orinoco_ioctl_setpreamble(struct net_device *dev, |
| struct iw_request_info *info, |
| void *wrqu, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| unsigned long flags; |
| int val; |
| |
| if (! priv->has_preamble) |
| return -EOPNOTSUPP; |
| |
| /* 802.11b has recently defined some short preamble. |
| * Basically, the Phy header has been reduced in size. |
| * This increase performance, especially at high rates |
| * (the preamble is transmitted at 1Mb/s), unfortunately |
| * this give compatibility troubles... - Jean II */ |
| val = *( (int *) extra ); |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| if (val) |
| priv->preamble = 1; |
| else |
| priv->preamble = 0; |
| |
| orinoco_unlock(priv, &flags); |
| |
| return -EINPROGRESS; /* Call commit handler */ |
| } |
| |
| static int orinoco_ioctl_getpreamble(struct net_device *dev, |
| struct iw_request_info *info, |
| void *wrqu, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| int *val = (int *) extra; |
| |
| if (! priv->has_preamble) |
| return -EOPNOTSUPP; |
| |
| *val = priv->preamble; |
| return 0; |
| } |
| |
| /* ioctl interface to hermes_read_ltv() |
| * To use with iwpriv, pass the RID as the token argument, e.g. |
| * iwpriv get_rid [0xfc00] |
| * At least Wireless Tools 25 is required to use iwpriv. |
| * For Wireless Tools 25 and 26 append "dummy" are the end. */ |
| static int orinoco_ioctl_getrid(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *data, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int rid = data->flags; |
| u16 length; |
| int err; |
| unsigned long flags; |
| |
| /* It's a "get" function, but we don't want users to access the |
| * WEP key and other raw firmware data */ |
| if (! capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| |
| if (rid < 0xfc00 || rid > 0xffff) |
| return -EINVAL; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| err = hermes_read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length, |
| extra); |
| if (err) |
| goto out; |
| |
| data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length), |
| MAX_RID_LEN); |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| return err; |
| } |
| |
| /* Trigger a scan (look for other cells in the vicinity */ |
| static int orinoco_ioctl_setscan(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_param *srq, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| hermes_t *hw = &priv->hw; |
| int err = 0; |
| unsigned long flags; |
| |
| /* Note : you may have realised that, as this is a SET operation, |
| * this is privileged and therefore a normal user can't |
| * perform scanning. |
| * This is not an error, while the device perform scanning, |
| * traffic doesn't flow, so it's a perfect DoS... |
| * Jean II */ |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| /* Scanning with port 0 disabled would fail */ |
| if (!netif_running(dev)) { |
| err = -ENETDOWN; |
| goto out; |
| } |
| |
| /* In monitor mode, the scan results are always empty. |
| * Probe responses are passed to the driver as received |
| * frames and could be processed in software. */ |
| if (priv->iw_mode == IW_MODE_MONITOR) { |
| err = -EOPNOTSUPP; |
| goto out; |
| } |
| |
| /* Note : because we don't lock out the irq handler, the way |
| * we access scan variables in priv is critical. |
| * o scan_inprogress : not touched by irq handler |
| * o scan_mode : not touched by irq handler |
| * o scan_len : synchronised with scan_result |
| * Before modifying anything on those variables, please think hard ! |
| * Jean II */ |
| |
| /* Save flags */ |
| priv->scan_mode = srq->flags; |
| |
| /* Always trigger scanning, even if it's in progress. |
| * This way, if the info frame get lost, we will recover somewhat |
| * gracefully - Jean II */ |
| |
| if (priv->has_hostscan) { |
| switch (priv->firmware_type) { |
| case FIRMWARE_TYPE_SYMBOL: |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFHOSTSCAN_SYMBOL, |
| HERMES_HOSTSCAN_SYMBOL_ONCE | |
| HERMES_HOSTSCAN_SYMBOL_BCAST); |
| break; |
| case FIRMWARE_TYPE_INTERSIL: { |
| __le16 req[3]; |
| |
| req[0] = cpu_to_le16(0x3fff); /* All channels */ |
| req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */ |
| req[2] = 0; /* Any ESSID */ |
| err = HERMES_WRITE_RECORD(hw, USER_BAP, |
| HERMES_RID_CNFHOSTSCAN, &req); |
| } |
| break; |
| case FIRMWARE_TYPE_AGERE: |
| err = hermes_write_wordrec(hw, USER_BAP, |
| HERMES_RID_CNFSCANSSID_AGERE, |
| 0); /* Any ESSID */ |
| if (err) |
| break; |
| |
| err = hermes_inquire(hw, HERMES_INQ_SCAN); |
| break; |
| } |
| } else |
| err = hermes_inquire(hw, HERMES_INQ_SCAN); |
| |
| /* One more client */ |
| if (! err) |
| priv->scan_inprogress = 1; |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| return err; |
| } |
| |
| #define MAX_CUSTOM_LEN 64 |
| |
| /* Translate scan data returned from the card to a card independant |
| * format that the Wireless Tools will understand - Jean II |
| * Return message length or -errno for fatal errors */ |
| static inline char *orinoco_translate_scan(struct net_device *dev, |
| struct iw_request_info *info, |
| char *current_ev, |
| char *end_buf, |
| union hermes_scan_info *bss, |
| unsigned int last_scanned) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| u16 capabilities; |
| u16 channel; |
| struct iw_event iwe; /* Temporary buffer */ |
| char *p; |
| char custom[MAX_CUSTOM_LEN]; |
| |
| /* First entry *MUST* be the AP MAC address */ |
| iwe.cmd = SIOCGIWAP; |
| iwe.u.ap_addr.sa_family = ARPHRD_ETHER; |
| memcpy(iwe.u.ap_addr.sa_data, bss->a.bssid, ETH_ALEN); |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, |
| &iwe, IW_EV_ADDR_LEN); |
| |
| /* Other entries will be displayed in the order we give them */ |
| |
| /* Add the ESSID */ |
| iwe.u.data.length = le16_to_cpu(bss->a.essid_len); |
| if (iwe.u.data.length > 32) |
| iwe.u.data.length = 32; |
| iwe.cmd = SIOCGIWESSID; |
| iwe.u.data.flags = 1; |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, |
| &iwe, bss->a.essid); |
| |
| /* Add mode */ |
| iwe.cmd = SIOCGIWMODE; |
| capabilities = le16_to_cpu(bss->a.capabilities); |
| if (capabilities & 0x3) { |
| if (capabilities & 0x1) |
| iwe.u.mode = IW_MODE_MASTER; |
| else |
| iwe.u.mode = IW_MODE_ADHOC; |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, |
| &iwe, IW_EV_UINT_LEN); |
| } |
| |
| channel = bss->s.channel; |
| if ((channel >= 1) && (channel <= NUM_CHANNELS)) { |
| /* Add frequency */ |
| iwe.cmd = SIOCGIWFREQ; |
| iwe.u.freq.m = channel_frequency[channel-1] * 100000; |
| iwe.u.freq.e = 1; |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, |
| &iwe, IW_EV_FREQ_LEN); |
| } |
| |
| /* Add quality statistics */ |
| iwe.cmd = IWEVQUAL; |
| iwe.u.qual.updated = 0x10; /* no link quality */ |
| iwe.u.qual.level = (__u8) le16_to_cpu(bss->a.level) - 0x95; |
| iwe.u.qual.noise = (__u8) le16_to_cpu(bss->a.noise) - 0x95; |
| /* Wireless tools prior to 27.pre22 will show link quality |
| * anyway, so we provide a reasonable value. */ |
| if (iwe.u.qual.level > iwe.u.qual.noise) |
| iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise; |
| else |
| iwe.u.qual.qual = 0; |
| current_ev = iwe_stream_add_event(info, current_ev, end_buf, |
| &iwe, IW_EV_QUAL_LEN); |
| |
| /* Add encryption capability */ |
| iwe.cmd = SIOCGIWENCODE; |
| if (capabilities & 0x10) |
| iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; |
| else |
| iwe.u.data.flags = IW_ENCODE_DISABLED; |
| iwe.u.data.length = 0; |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, |
| &iwe, bss->a.essid); |
| |
| /* Add EXTRA: Age to display seconds since last beacon/probe response |
| * for given network. */ |
| iwe.cmd = IWEVCUSTOM; |
| p = custom; |
| p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), |
| " Last beacon: %dms ago", |
| jiffies_to_msecs(jiffies - last_scanned)); |
| iwe.u.data.length = p - custom; |
| if (iwe.u.data.length) |
| current_ev = iwe_stream_add_point(info, current_ev, end_buf, |
| &iwe, custom); |
| |
| /* Bit rate is not available in Lucent/Agere firmwares */ |
| if (priv->firmware_type != FIRMWARE_TYPE_AGERE) { |
| char *current_val = current_ev + iwe_stream_lcp_len(info); |
| int i; |
| int step; |
| |
| if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL) |
| step = 2; |
| else |
| step = 1; |
| |
| iwe.cmd = SIOCGIWRATE; |
| /* Those two flags are ignored... */ |
| iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; |
| /* Max 10 values */ |
| for (i = 0; i < 10; i += step) { |
| /* NULL terminated */ |
| if (bss->p.rates[i] == 0x0) |
| break; |
| /* Bit rate given in 500 kb/s units (+ 0x80) */ |
| iwe.u.bitrate.value = ((bss->p.rates[i] & 0x7f) * 500000); |
| current_val = iwe_stream_add_value(info, current_ev, |
| current_val, |
| end_buf, &iwe, |
| IW_EV_PARAM_LEN); |
| } |
| /* Check if we added any event */ |
| if ((current_val - current_ev) > iwe_stream_lcp_len(info)) |
| current_ev = current_val; |
| } |
| |
| return current_ev; |
| } |
| |
| /* Return results of a scan */ |
| static int orinoco_ioctl_getscan(struct net_device *dev, |
| struct iw_request_info *info, |
| struct iw_point *srq, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| bss_element *bss; |
| int err = 0; |
| unsigned long flags; |
| char *current_ev = extra; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| if (priv->scan_inprogress) { |
| /* Important note : we don't want to block the caller |
| * until results are ready for various reasons. |
| * First, managing wait queues is complex and racy. |
| * Second, we grab some rtnetlink lock before comming |
| * here (in dev_ioctl()). |
| * Third, we generate an Wireless Event, so the |
| * caller can wait itself on that - Jean II */ |
| err = -EAGAIN; |
| goto out; |
| } |
| |
| list_for_each_entry(bss, &priv->bss_list, list) { |
| /* Translate to WE format this entry */ |
| current_ev = orinoco_translate_scan(dev, info, current_ev, |
| extra + srq->length, |
| &bss->bss, |
| bss->last_scanned); |
| |
| /* Check if there is space for one more entry */ |
| if ((extra + srq->length - current_ev) <= IW_EV_ADDR_LEN) { |
| /* Ask user space to try again with a bigger buffer */ |
| err = -E2BIG; |
| goto out; |
| } |
| } |
| |
| srq->length = (current_ev - extra); |
| srq->flags = (__u16) priv->scan_mode; |
| |
| out: |
| orinoco_unlock(priv, &flags); |
| return err; |
| } |
| |
| /* Commit handler, called after set operations */ |
| static int orinoco_ioctl_commit(struct net_device *dev, |
| struct iw_request_info *info, |
| void *wrqu, |
| char *extra) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct hermes *hw = &priv->hw; |
| unsigned long flags; |
| int err = 0; |
| |
| if (!priv->open) |
| return 0; |
| |
| if (priv->broken_disableport) { |
| orinoco_reset(&priv->reset_work); |
| return 0; |
| } |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return err; |
| |
| err = hermes_disable_port(hw, 0); |
| if (err) { |
| printk(KERN_WARNING "%s: Unable to disable port " |
| "while reconfiguring card\n", dev->name); |
| priv->broken_disableport = 1; |
| goto out; |
| } |
| |
| err = __orinoco_program_rids(dev); |
| if (err) { |
| printk(KERN_WARNING "%s: Unable to reconfigure card\n", |
| dev->name); |
| goto out; |
| } |
| |
| err = hermes_enable_port(hw, 0); |
| if (err) { |
| printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n", |
| dev->name); |
| goto out; |
| } |
| |
| out: |
| if (err) { |
| printk(KERN_WARNING "%s: Resetting instead...\n", dev->name); |
| schedule_work(&priv->reset_work); |
| err = 0; |
| } |
| |
| orinoco_unlock(priv, &flags); |
| return err; |
| } |
| |
| static const struct iw_priv_args orinoco_privtab[] = { |
| { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" }, |
| { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" }, |
| { SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, |
| 0, "set_port3" }, |
| { SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, |
| "get_port3" }, |
| { SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, |
| 0, "set_preamble" }, |
| { SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, |
| "get_preamble" }, |
| { SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, |
| 0, "set_ibssport" }, |
| { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, |
| "get_ibssport" }, |
| { SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN, |
| "get_rid" }, |
| }; |
| |
| |
| /* |
| * Structures to export the Wireless Handlers |
| */ |
| |
| static const iw_handler orinoco_handler[] = { |
| [SIOCSIWCOMMIT-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_commit, |
| [SIOCGIWNAME -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getname, |
| [SIOCSIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfreq, |
| [SIOCGIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfreq, |
| [SIOCSIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setmode, |
| [SIOCGIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getmode, |
| [SIOCSIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setsens, |
| [SIOCGIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getsens, |
| [SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwrange, |
| [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_set_spy, |
| [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_get_spy, |
| [SIOCSIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_set_thrspy, |
| [SIOCGIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_get_thrspy, |
| [SIOCSIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setwap, |
| [SIOCGIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getwap, |
| [SIOCSIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setscan, |
| [SIOCGIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getscan, |
| [SIOCSIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setessid, |
| [SIOCGIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getessid, |
| [SIOCSIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setnick, |
| [SIOCGIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getnick, |
| [SIOCSIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrate, |
| [SIOCGIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrate, |
| [SIOCSIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrts, |
| [SIOCGIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrts, |
| [SIOCSIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfrag, |
| [SIOCGIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfrag, |
| [SIOCGIWRETRY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getretry, |
| [SIOCSIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setiwencode, |
| [SIOCGIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwencode, |
| [SIOCSIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setpower, |
| [SIOCGIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getpower, |
| }; |
| |
| |
| /* |
| Added typecasting since we no longer use iwreq_data -- Moustafa |
| */ |
| static const iw_handler orinoco_private_handler[] = { |
| [0] = (iw_handler) orinoco_ioctl_reset, |
| [1] = (iw_handler) orinoco_ioctl_reset, |
| [2] = (iw_handler) orinoco_ioctl_setport3, |
| [3] = (iw_handler) orinoco_ioctl_getport3, |
| [4] = (iw_handler) orinoco_ioctl_setpreamble, |
| [5] = (iw_handler) orinoco_ioctl_getpreamble, |
| [6] = (iw_handler) orinoco_ioctl_setibssport, |
| [7] = (iw_handler) orinoco_ioctl_getibssport, |
| [9] = (iw_handler) orinoco_ioctl_getrid, |
| }; |
| |
| static const struct iw_handler_def orinoco_handler_def = { |
| .num_standard = ARRAY_SIZE(orinoco_handler), |
| .num_private = ARRAY_SIZE(orinoco_private_handler), |
| .num_private_args = ARRAY_SIZE(orinoco_privtab), |
| .standard = orinoco_handler, |
| .private = orinoco_private_handler, |
| .private_args = orinoco_privtab, |
| .get_wireless_stats = orinoco_get_wireless_stats, |
| }; |
| |
| static void orinoco_get_drvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| struct orinoco_private *priv = netdev_priv(dev); |
| |
| strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1); |
| strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1); |
| strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1); |
| if (dev->dev.parent) |
| strncpy(info->bus_info, dev->dev.parent->bus_id, |
| sizeof(info->bus_info) - 1); |
| else |
| snprintf(info->bus_info, sizeof(info->bus_info) - 1, |
| "PCMCIA %p", priv->hw.iobase); |
| } |
| |
| static const struct ethtool_ops orinoco_ethtool_ops = { |
| .get_drvinfo = orinoco_get_drvinfo, |
| .get_link = ethtool_op_get_link, |
| }; |
| |
| /********************************************************************/ |
| /* Module initialization */ |
| /********************************************************************/ |
| |
| EXPORT_SYMBOL(alloc_orinocodev); |
| EXPORT_SYMBOL(free_orinocodev); |
| |
| EXPORT_SYMBOL(__orinoco_up); |
| EXPORT_SYMBOL(__orinoco_down); |
| EXPORT_SYMBOL(orinoco_reinit_firmware); |
| |
| EXPORT_SYMBOL(orinoco_interrupt); |
| |
| /* Can't be declared "const" or the whole __initdata section will |
| * become const */ |
| static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION |
| " (David Gibson <hermes@gibson.dropbear.id.au>, " |
| "Pavel Roskin <proski@gnu.org>, et al)"; |
| |
| static int __init init_orinoco(void) |
| { |
| printk(KERN_DEBUG "%s\n", version); |
| return 0; |
| } |
| |
| static void __exit exit_orinoco(void) |
| { |
| } |
| |
| module_init(init_orinoco); |
| module_exit(exit_orinoco); |