| /* |
| * Generic GPIO driver for logic cells found in the Nomadik SoC |
| * |
| * Copyright (C) 2008,2009 STMicroelectronics |
| * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> |
| * Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/gpio.h> |
| #include <linux/spinlock.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/slab.h> |
| |
| #include <plat/pincfg.h> |
| #include <mach/hardware.h> |
| #include <mach/gpio.h> |
| |
| /* |
| * The GPIO module in the Nomadik family of Systems-on-Chip is an |
| * AMBA device, managing 32 pins and alternate functions. The logic block |
| * is currently only used in the Nomadik. |
| * |
| * Symbols in this file are called "nmk_gpio" for "nomadik gpio" |
| */ |
| |
| #define NMK_GPIO_PER_CHIP 32 |
| struct nmk_gpio_chip { |
| struct gpio_chip chip; |
| void __iomem *addr; |
| struct clk *clk; |
| unsigned int parent_irq; |
| spinlock_t lock; |
| /* Keep track of configured edges */ |
| u32 edge_rising; |
| u32 edge_falling; |
| }; |
| |
| static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip, |
| unsigned offset, int gpio_mode) |
| { |
| u32 bit = 1 << offset; |
| u32 afunc, bfunc; |
| |
| afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit; |
| bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit; |
| if (gpio_mode & NMK_GPIO_ALT_A) |
| afunc |= bit; |
| if (gpio_mode & NMK_GPIO_ALT_B) |
| bfunc |= bit; |
| writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA); |
| writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB); |
| } |
| |
| static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip, |
| unsigned offset, enum nmk_gpio_slpm mode) |
| { |
| u32 bit = 1 << offset; |
| u32 slpm; |
| |
| slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC); |
| if (mode == NMK_GPIO_SLPM_NOCHANGE) |
| slpm |= bit; |
| else |
| slpm &= ~bit; |
| writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC); |
| } |
| |
| static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip, |
| unsigned offset, enum nmk_gpio_pull pull) |
| { |
| u32 bit = 1 << offset; |
| u32 pdis; |
| |
| pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS); |
| if (pull == NMK_GPIO_PULL_NONE) |
| pdis |= bit; |
| else |
| pdis &= ~bit; |
| writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS); |
| |
| if (pull == NMK_GPIO_PULL_UP) |
| writel(bit, nmk_chip->addr + NMK_GPIO_DATS); |
| else if (pull == NMK_GPIO_PULL_DOWN) |
| writel(bit, nmk_chip->addr + NMK_GPIO_DATC); |
| } |
| |
| static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip, |
| unsigned offset) |
| { |
| writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); |
| } |
| |
| static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip, |
| unsigned offset, int val) |
| { |
| if (val) |
| writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS); |
| else |
| writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC); |
| } |
| |
| static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip, |
| unsigned offset, int val) |
| { |
| writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); |
| __nmk_gpio_set_output(nmk_chip, offset, val); |
| } |
| |
| static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, |
| pin_cfg_t cfg, bool sleep) |
| { |
| static const char *afnames[] = { |
| [NMK_GPIO_ALT_GPIO] = "GPIO", |
| [NMK_GPIO_ALT_A] = "A", |
| [NMK_GPIO_ALT_B] = "B", |
| [NMK_GPIO_ALT_C] = "C" |
| }; |
| static const char *pullnames[] = { |
| [NMK_GPIO_PULL_NONE] = "none", |
| [NMK_GPIO_PULL_UP] = "up", |
| [NMK_GPIO_PULL_DOWN] = "down", |
| [3] /* illegal */ = "??" |
| }; |
| static const char *slpmnames[] = { |
| [NMK_GPIO_SLPM_INPUT] = "input/wakeup", |
| [NMK_GPIO_SLPM_NOCHANGE] = "no-change/no-wakeup", |
| }; |
| |
| int pin = PIN_NUM(cfg); |
| int pull = PIN_PULL(cfg); |
| int af = PIN_ALT(cfg); |
| int slpm = PIN_SLPM(cfg); |
| int output = PIN_DIR(cfg); |
| int val = PIN_VAL(cfg); |
| |
| dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: af %s, pull %s, slpm %s (%s%s)\n", |
| pin, cfg, afnames[af], pullnames[pull], slpmnames[slpm], |
| output ? "output " : "input", |
| output ? (val ? "high" : "low") : ""); |
| |
| if (sleep) { |
| int slpm_pull = PIN_SLPM_PULL(cfg); |
| int slpm_output = PIN_SLPM_DIR(cfg); |
| int slpm_val = PIN_SLPM_VAL(cfg); |
| |
| /* |
| * The SLPM_* values are normal values + 1 to allow zero to |
| * mean "same as normal". |
| */ |
| if (slpm_pull) |
| pull = slpm_pull - 1; |
| if (slpm_output) |
| output = slpm_output - 1; |
| if (slpm_val) |
| val = slpm_val - 1; |
| |
| dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n", |
| pin, |
| slpm_pull ? pullnames[pull] : "same", |
| slpm_output ? (output ? "output" : "input") : "same", |
| slpm_val ? (val ? "high" : "low") : "same"); |
| } |
| |
| if (output) |
| __nmk_gpio_make_output(nmk_chip, offset, val); |
| else { |
| __nmk_gpio_make_input(nmk_chip, offset); |
| __nmk_gpio_set_pull(nmk_chip, offset, pull); |
| } |
| |
| __nmk_gpio_set_slpm(nmk_chip, offset, slpm); |
| __nmk_gpio_set_mode(nmk_chip, offset, af); |
| } |
| |
| /** |
| * nmk_config_pin - configure a pin's mux attributes |
| * @cfg: pin confguration |
| * |
| * Configures a pin's mode (alternate function or GPIO), its pull up status, |
| * and its sleep mode based on the specified configuration. The @cfg is |
| * usually one of the SoC specific macros defined in mach/<soc>-pins.h. These |
| * are constructed using, and can be further enhanced with, the macros in |
| * plat/pincfg.h. |
| * |
| * If a pin's mode is set to GPIO, it is configured as an input to avoid |
| * side-effects. The gpio can be manipulated later using standard GPIO API |
| * calls. |
| */ |
| int nmk_config_pin(pin_cfg_t cfg, bool sleep) |
| { |
| struct nmk_gpio_chip *nmk_chip; |
| int gpio = PIN_NUM(cfg); |
| unsigned long flags; |
| |
| nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); |
| if (!nmk_chip) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&nmk_chip->lock, flags); |
| __nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg, sleep); |
| spin_unlock_irqrestore(&nmk_chip->lock, flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(nmk_config_pin); |
| |
| /** |
| * nmk_config_pins - configure several pins at once |
| * @cfgs: array of pin configurations |
| * @num: number of elments in the array |
| * |
| * Configures several pins using nmk_config_pin(). Refer to that function for |
| * further information. |
| */ |
| int nmk_config_pins(pin_cfg_t *cfgs, int num) |
| { |
| int ret = 0; |
| int i; |
| |
| for (i = 0; i < num; i++) { |
| ret = nmk_config_pin(cfgs[i], false); |
| if (ret) |
| break; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(nmk_config_pins); |
| |
| int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num) |
| { |
| int ret = 0; |
| int i; |
| |
| for (i = 0; i < num; i++) { |
| ret = nmk_config_pin(cfgs[i], true); |
| if (ret) |
| break; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(nmk_config_pins_sleep); |
| |
| /** |
| * nmk_gpio_set_slpm() - configure the sleep mode of a pin |
| * @gpio: pin number |
| * @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE, |
| * |
| * Sets the sleep mode of a pin. If @mode is NMK_GPIO_SLPM_INPUT, the pin is |
| * changed to an input (with pullup/down enabled) in sleep and deep sleep. If |
| * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was |
| * configured even when in sleep and deep sleep. |
| * |
| * On DB8500v2 onwards, this setting loses the previous meaning and instead |
| * indicates if wakeup detection is enabled on the pin. Note that |
| * enable_irq_wake() will automatically enable wakeup detection. |
| */ |
| int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode) |
| { |
| struct nmk_gpio_chip *nmk_chip; |
| unsigned long flags; |
| |
| nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); |
| if (!nmk_chip) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&nmk_chip->lock, flags); |
| __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, mode); |
| spin_unlock_irqrestore(&nmk_chip->lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * nmk_gpio_set_pull() - enable/disable pull up/down on a gpio |
| * @gpio: pin number |
| * @pull: one of NMK_GPIO_PULL_DOWN, NMK_GPIO_PULL_UP, and NMK_GPIO_PULL_NONE |
| * |
| * Enables/disables pull up/down on a specified pin. This only takes effect if |
| * the pin is configured as an input (either explicitly or by the alternate |
| * function). |
| * |
| * NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is |
| * configured as an input. Otherwise, due to the way the controller registers |
| * work, this function will change the value output on the pin. |
| */ |
| int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull) |
| { |
| struct nmk_gpio_chip *nmk_chip; |
| unsigned long flags; |
| |
| nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); |
| if (!nmk_chip) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&nmk_chip->lock, flags); |
| __nmk_gpio_set_pull(nmk_chip, gpio - nmk_chip->chip.base, pull); |
| spin_unlock_irqrestore(&nmk_chip->lock, flags); |
| |
| return 0; |
| } |
| |
| /* Mode functions */ |
| int nmk_gpio_set_mode(int gpio, int gpio_mode) |
| { |
| struct nmk_gpio_chip *nmk_chip; |
| unsigned long flags; |
| |
| nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); |
| if (!nmk_chip) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&nmk_chip->lock, flags); |
| __nmk_gpio_set_mode(nmk_chip, gpio - nmk_chip->chip.base, gpio_mode); |
| spin_unlock_irqrestore(&nmk_chip->lock, flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(nmk_gpio_set_mode); |
| |
| int nmk_gpio_get_mode(int gpio) |
| { |
| struct nmk_gpio_chip *nmk_chip; |
| u32 afunc, bfunc, bit; |
| |
| nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); |
| if (!nmk_chip) |
| return -EINVAL; |
| |
| bit = 1 << (gpio - nmk_chip->chip.base); |
| |
| afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit; |
| bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit; |
| |
| return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0); |
| } |
| EXPORT_SYMBOL(nmk_gpio_get_mode); |
| |
| |
| /* IRQ functions */ |
| static inline int nmk_gpio_get_bitmask(int gpio) |
| { |
| return 1 << (gpio % 32); |
| } |
| |
| static void nmk_gpio_irq_ack(struct irq_data *d) |
| { |
| int gpio; |
| struct nmk_gpio_chip *nmk_chip; |
| |
| gpio = NOMADIK_IRQ_TO_GPIO(d->irq); |
| nmk_chip = irq_data_get_irq_chip_data(d); |
| if (!nmk_chip) |
| return; |
| writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC); |
| } |
| |
| enum nmk_gpio_irq_type { |
| NORMAL, |
| WAKE, |
| }; |
| |
| static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip, |
| int gpio, enum nmk_gpio_irq_type which, |
| bool enable) |
| { |
| u32 rimsc = which == WAKE ? NMK_GPIO_RWIMSC : NMK_GPIO_RIMSC; |
| u32 fimsc = which == WAKE ? NMK_GPIO_FWIMSC : NMK_GPIO_FIMSC; |
| u32 bitmask = nmk_gpio_get_bitmask(gpio); |
| u32 reg; |
| |
| /* we must individually set/clear the two edges */ |
| if (nmk_chip->edge_rising & bitmask) { |
| reg = readl(nmk_chip->addr + rimsc); |
| if (enable) |
| reg |= bitmask; |
| else |
| reg &= ~bitmask; |
| writel(reg, nmk_chip->addr + rimsc); |
| } |
| if (nmk_chip->edge_falling & bitmask) { |
| reg = readl(nmk_chip->addr + fimsc); |
| if (enable) |
| reg |= bitmask; |
| else |
| reg &= ~bitmask; |
| writel(reg, nmk_chip->addr + fimsc); |
| } |
| } |
| |
| static int nmk_gpio_irq_modify(struct irq_data *d, enum nmk_gpio_irq_type which, |
| bool enable) |
| { |
| int gpio; |
| struct nmk_gpio_chip *nmk_chip; |
| unsigned long flags; |
| u32 bitmask; |
| |
| gpio = NOMADIK_IRQ_TO_GPIO(d->irq); |
| nmk_chip = irq_data_get_irq_chip_data(d); |
| bitmask = nmk_gpio_get_bitmask(gpio); |
| if (!nmk_chip) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&nmk_chip->lock, flags); |
| __nmk_gpio_irq_modify(nmk_chip, gpio, which, enable); |
| spin_unlock_irqrestore(&nmk_chip->lock, flags); |
| |
| return 0; |
| } |
| |
| static void nmk_gpio_irq_mask(struct irq_data *d) |
| { |
| nmk_gpio_irq_modify(d, NORMAL, false); |
| } |
| |
| static void nmk_gpio_irq_unmask(struct irq_data *d) |
| { |
| nmk_gpio_irq_modify(d, NORMAL, true); |
| } |
| |
| static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on) |
| { |
| struct nmk_gpio_chip *nmk_chip; |
| unsigned long flags; |
| int gpio; |
| |
| gpio = NOMADIK_IRQ_TO_GPIO(d->irq); |
| nmk_chip = irq_data_get_irq_chip_data(d); |
| if (!nmk_chip) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&nmk_chip->lock, flags); |
| #ifdef CONFIG_ARCH_U8500 |
| if (cpu_is_u8500v2()) { |
| __nmk_gpio_set_slpm(nmk_chip, gpio, |
| on ? NMK_GPIO_SLPM_WAKEUP_ENABLE |
| : NMK_GPIO_SLPM_WAKEUP_DISABLE); |
| } |
| #endif |
| __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on); |
| spin_unlock_irqrestore(&nmk_chip->lock, flags); |
| |
| return 0; |
| } |
| |
| static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type) |
| { |
| struct irq_desc *desc = irq_to_desc(d->irq); |
| bool enabled = !(desc->status & IRQ_DISABLED); |
| bool wake = desc->wake_depth; |
| int gpio; |
| struct nmk_gpio_chip *nmk_chip; |
| unsigned long flags; |
| u32 bitmask; |
| |
| gpio = NOMADIK_IRQ_TO_GPIO(d->irq); |
| nmk_chip = irq_data_get_irq_chip_data(d); |
| bitmask = nmk_gpio_get_bitmask(gpio); |
| if (!nmk_chip) |
| return -EINVAL; |
| |
| if (type & IRQ_TYPE_LEVEL_HIGH) |
| return -EINVAL; |
| if (type & IRQ_TYPE_LEVEL_LOW) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&nmk_chip->lock, flags); |
| |
| if (enabled) |
| __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false); |
| |
| if (wake) |
| __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, false); |
| |
| nmk_chip->edge_rising &= ~bitmask; |
| if (type & IRQ_TYPE_EDGE_RISING) |
| nmk_chip->edge_rising |= bitmask; |
| |
| nmk_chip->edge_falling &= ~bitmask; |
| if (type & IRQ_TYPE_EDGE_FALLING) |
| nmk_chip->edge_falling |= bitmask; |
| |
| if (enabled) |
| __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, true); |
| |
| if (wake) |
| __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true); |
| |
| spin_unlock_irqrestore(&nmk_chip->lock, flags); |
| |
| return 0; |
| } |
| |
| static struct irq_chip nmk_gpio_irq_chip = { |
| .name = "Nomadik-GPIO", |
| .irq_ack = nmk_gpio_irq_ack, |
| .irq_mask = nmk_gpio_irq_mask, |
| .irq_unmask = nmk_gpio_irq_unmask, |
| .irq_set_type = nmk_gpio_irq_set_type, |
| .irq_set_wake = nmk_gpio_irq_set_wake, |
| }; |
| |
| static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) |
| { |
| struct nmk_gpio_chip *nmk_chip; |
| struct irq_chip *host_chip = get_irq_chip(irq); |
| unsigned int gpio_irq; |
| u32 pending; |
| unsigned int first_irq; |
| |
| if (host_chip->irq_mask_ack) |
| host_chip->irq_mask_ack(&desc->irq_data); |
| else { |
| host_chip->irq_mask(&desc->irq_data); |
| if (host_chip->irq_ack) |
| host_chip->irq_ack(&desc->irq_data); |
| } |
| |
| nmk_chip = get_irq_data(irq); |
| first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); |
| while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) { |
| gpio_irq = first_irq + __ffs(pending); |
| generic_handle_irq(gpio_irq); |
| } |
| |
| host_chip->irq_unmask(&desc->irq_data); |
| } |
| |
| static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip) |
| { |
| unsigned int first_irq; |
| int i; |
| |
| first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); |
| for (i = first_irq; i < first_irq + NMK_GPIO_PER_CHIP; i++) { |
| set_irq_chip(i, &nmk_gpio_irq_chip); |
| set_irq_handler(i, handle_edge_irq); |
| set_irq_flags(i, IRQF_VALID); |
| set_irq_chip_data(i, nmk_chip); |
| set_irq_type(i, IRQ_TYPE_EDGE_FALLING); |
| } |
| set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler); |
| set_irq_data(nmk_chip->parent_irq, nmk_chip); |
| return 0; |
| } |
| |
| /* I/O Functions */ |
| static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset) |
| { |
| struct nmk_gpio_chip *nmk_chip = |
| container_of(chip, struct nmk_gpio_chip, chip); |
| |
| writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); |
| return 0; |
| } |
| |
| static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset) |
| { |
| struct nmk_gpio_chip *nmk_chip = |
| container_of(chip, struct nmk_gpio_chip, chip); |
| u32 bit = 1 << offset; |
| |
| return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0; |
| } |
| |
| static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset, |
| int val) |
| { |
| struct nmk_gpio_chip *nmk_chip = |
| container_of(chip, struct nmk_gpio_chip, chip); |
| |
| __nmk_gpio_set_output(nmk_chip, offset, val); |
| } |
| |
| static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, |
| int val) |
| { |
| struct nmk_gpio_chip *nmk_chip = |
| container_of(chip, struct nmk_gpio_chip, chip); |
| |
| __nmk_gpio_make_output(nmk_chip, offset, val); |
| |
| return 0; |
| } |
| |
| static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset) |
| { |
| struct nmk_gpio_chip *nmk_chip = |
| container_of(chip, struct nmk_gpio_chip, chip); |
| |
| return NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base) + offset; |
| } |
| |
| /* This structure is replicated for each GPIO block allocated at probe time */ |
| static struct gpio_chip nmk_gpio_template = { |
| .direction_input = nmk_gpio_make_input, |
| .get = nmk_gpio_get_input, |
| .direction_output = nmk_gpio_make_output, |
| .set = nmk_gpio_set_output, |
| .to_irq = nmk_gpio_to_irq, |
| .ngpio = NMK_GPIO_PER_CHIP, |
| .can_sleep = 0, |
| }; |
| |
| static int __devinit nmk_gpio_probe(struct platform_device *dev) |
| { |
| struct nmk_gpio_platform_data *pdata = dev->dev.platform_data; |
| struct nmk_gpio_chip *nmk_chip; |
| struct gpio_chip *chip; |
| struct resource *res; |
| struct clk *clk; |
| int irq; |
| int ret; |
| |
| if (!pdata) |
| return -ENODEV; |
| |
| res = platform_get_resource(dev, IORESOURCE_MEM, 0); |
| if (!res) { |
| ret = -ENOENT; |
| goto out; |
| } |
| |
| irq = platform_get_irq(dev, 0); |
| if (irq < 0) { |
| ret = irq; |
| goto out; |
| } |
| |
| if (request_mem_region(res->start, resource_size(res), |
| dev_name(&dev->dev)) == NULL) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| clk = clk_get(&dev->dev, NULL); |
| if (IS_ERR(clk)) { |
| ret = PTR_ERR(clk); |
| goto out_release; |
| } |
| |
| clk_enable(clk); |
| |
| nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL); |
| if (!nmk_chip) { |
| ret = -ENOMEM; |
| goto out_clk; |
| } |
| /* |
| * The virt address in nmk_chip->addr is in the nomadik register space, |
| * so we can simply convert the resource address, without remapping |
| */ |
| nmk_chip->clk = clk; |
| nmk_chip->addr = io_p2v(res->start); |
| nmk_chip->chip = nmk_gpio_template; |
| nmk_chip->parent_irq = irq; |
| spin_lock_init(&nmk_chip->lock); |
| |
| chip = &nmk_chip->chip; |
| chip->base = pdata->first_gpio; |
| chip->label = pdata->name ?: dev_name(&dev->dev); |
| chip->dev = &dev->dev; |
| chip->owner = THIS_MODULE; |
| |
| ret = gpiochip_add(&nmk_chip->chip); |
| if (ret) |
| goto out_free; |
| |
| platform_set_drvdata(dev, nmk_chip); |
| |
| nmk_gpio_init_irq(nmk_chip); |
| |
| dev_info(&dev->dev, "Bits %i-%i at address %p\n", |
| nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr); |
| return 0; |
| |
| out_free: |
| kfree(nmk_chip); |
| out_clk: |
| clk_disable(clk); |
| clk_put(clk); |
| out_release: |
| release_mem_region(res->start, resource_size(res)); |
| out: |
| dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret, |
| pdata->first_gpio, pdata->first_gpio+31); |
| return ret; |
| } |
| |
| static struct platform_driver nmk_gpio_driver = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "gpio", |
| }, |
| .probe = nmk_gpio_probe, |
| .suspend = NULL, /* to be done */ |
| .resume = NULL, |
| }; |
| |
| static int __init nmk_gpio_init(void) |
| { |
| return platform_driver_register(&nmk_gpio_driver); |
| } |
| |
| core_initcall(nmk_gpio_init); |
| |
| MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini"); |
| MODULE_DESCRIPTION("Nomadik GPIO Driver"); |
| MODULE_LICENSE("GPL"); |
| |
| |