| /* |
| * Synopsys Designware PCIe host controller driver |
| * |
| * Copyright (C) 2013 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * Author: Jingoo Han <jg1.han@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/irq.h> |
| #include <linux/irqdomain.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/msi.h> |
| #include <linux/of_address.h> |
| #include <linux/of_pci.h> |
| #include <linux/pci.h> |
| #include <linux/pci_regs.h> |
| #include <linux/platform_device.h> |
| #include <linux/types.h> |
| |
| #include "pcie-designware.h" |
| |
| /* Synopsis specific PCIE configuration registers */ |
| #define PCIE_PORT_LINK_CONTROL 0x710 |
| #define PORT_LINK_MODE_MASK (0x3f << 16) |
| #define PORT_LINK_MODE_1_LANES (0x1 << 16) |
| #define PORT_LINK_MODE_2_LANES (0x3 << 16) |
| #define PORT_LINK_MODE_4_LANES (0x7 << 16) |
| |
| #define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C |
| #define PORT_LOGIC_SPEED_CHANGE (0x1 << 17) |
| #define PORT_LOGIC_LINK_WIDTH_MASK (0x1ff << 8) |
| #define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8) |
| #define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8) |
| #define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8) |
| |
| #define PCIE_MSI_ADDR_LO 0x820 |
| #define PCIE_MSI_ADDR_HI 0x824 |
| #define PCIE_MSI_INTR0_ENABLE 0x828 |
| #define PCIE_MSI_INTR0_MASK 0x82C |
| #define PCIE_MSI_INTR0_STATUS 0x830 |
| |
| #define PCIE_ATU_VIEWPORT 0x900 |
| #define PCIE_ATU_REGION_INBOUND (0x1 << 31) |
| #define PCIE_ATU_REGION_OUTBOUND (0x0 << 31) |
| #define PCIE_ATU_REGION_INDEX1 (0x1 << 0) |
| #define PCIE_ATU_REGION_INDEX0 (0x0 << 0) |
| #define PCIE_ATU_CR1 0x904 |
| #define PCIE_ATU_TYPE_MEM (0x0 << 0) |
| #define PCIE_ATU_TYPE_IO (0x2 << 0) |
| #define PCIE_ATU_TYPE_CFG0 (0x4 << 0) |
| #define PCIE_ATU_TYPE_CFG1 (0x5 << 0) |
| #define PCIE_ATU_CR2 0x908 |
| #define PCIE_ATU_ENABLE (0x1 << 31) |
| #define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30) |
| #define PCIE_ATU_LOWER_BASE 0x90C |
| #define PCIE_ATU_UPPER_BASE 0x910 |
| #define PCIE_ATU_LIMIT 0x914 |
| #define PCIE_ATU_LOWER_TARGET 0x918 |
| #define PCIE_ATU_BUS(x) (((x) & 0xff) << 24) |
| #define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19) |
| #define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) |
| #define PCIE_ATU_UPPER_TARGET 0x91C |
| |
| static struct hw_pci dw_pci; |
| |
| static unsigned long global_io_offset; |
| |
| static inline struct pcie_port *sys_to_pcie(struct pci_sys_data *sys) |
| { |
| return sys->private_data; |
| } |
| |
| int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val) |
| { |
| *val = readl(addr); |
| |
| if (size == 1) |
| *val = (*val >> (8 * (where & 3))) & 0xff; |
| else if (size == 2) |
| *val = (*val >> (8 * (where & 3))) & 0xffff; |
| else if (size != 4) |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| int dw_pcie_cfg_write(void __iomem *addr, int where, int size, u32 val) |
| { |
| if (size == 4) |
| writel(val, addr); |
| else if (size == 2) |
| writew(val, addr + (where & 2)); |
| else if (size == 1) |
| writeb(val, addr + (where & 3)); |
| else |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static inline void dw_pcie_readl_rc(struct pcie_port *pp, u32 reg, u32 *val) |
| { |
| if (pp->ops->readl_rc) |
| pp->ops->readl_rc(pp, pp->dbi_base + reg, val); |
| else |
| *val = readl(pp->dbi_base + reg); |
| } |
| |
| static inline void dw_pcie_writel_rc(struct pcie_port *pp, u32 val, u32 reg) |
| { |
| if (pp->ops->writel_rc) |
| pp->ops->writel_rc(pp, val, pp->dbi_base + reg); |
| else |
| writel(val, pp->dbi_base + reg); |
| } |
| |
| static int dw_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, |
| u32 *val) |
| { |
| int ret; |
| |
| if (pp->ops->rd_own_conf) |
| ret = pp->ops->rd_own_conf(pp, where, size, val); |
| else |
| ret = dw_pcie_cfg_read(pp->dbi_base + (where & ~0x3), where, |
| size, val); |
| |
| return ret; |
| } |
| |
| static int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size, |
| u32 val) |
| { |
| int ret; |
| |
| if (pp->ops->wr_own_conf) |
| ret = pp->ops->wr_own_conf(pp, where, size, val); |
| else |
| ret = dw_pcie_cfg_write(pp->dbi_base + (where & ~0x3), where, |
| size, val); |
| |
| return ret; |
| } |
| |
| static struct irq_chip dw_msi_irq_chip = { |
| .name = "PCI-MSI", |
| .irq_enable = unmask_msi_irq, |
| .irq_disable = mask_msi_irq, |
| .irq_mask = mask_msi_irq, |
| .irq_unmask = unmask_msi_irq, |
| }; |
| |
| /* MSI int handler */ |
| irqreturn_t dw_handle_msi_irq(struct pcie_port *pp) |
| { |
| unsigned long val; |
| int i, pos, irq; |
| irqreturn_t ret = IRQ_NONE; |
| |
| for (i = 0; i < MAX_MSI_CTRLS; i++) { |
| dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_STATUS + i * 12, 4, |
| (u32 *)&val); |
| if (val) { |
| ret = IRQ_HANDLED; |
| pos = 0; |
| while ((pos = find_next_bit(&val, 32, pos)) != 32) { |
| irq = irq_find_mapping(pp->irq_domain, |
| i * 32 + pos); |
| dw_pcie_wr_own_conf(pp, |
| PCIE_MSI_INTR0_STATUS + i * 12, |
| 4, 1 << pos); |
| generic_handle_irq(irq); |
| pos++; |
| } |
| } |
| } |
| |
| return ret; |
| } |
| |
| void dw_pcie_msi_init(struct pcie_port *pp) |
| { |
| pp->msi_data = __get_free_pages(GFP_KERNEL, 0); |
| |
| /* program the msi_data */ |
| dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4, |
| virt_to_phys((void *)pp->msi_data)); |
| dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0); |
| } |
| |
| static int find_valid_pos0(struct pcie_port *pp, int msgvec, int pos, int *pos0) |
| { |
| int flag = 1; |
| |
| do { |
| pos = find_next_zero_bit(pp->msi_irq_in_use, |
| MAX_MSI_IRQS, pos); |
| /*if you have reached to the end then get out from here.*/ |
| if (pos == MAX_MSI_IRQS) |
| return -ENOSPC; |
| /* |
| * Check if this position is at correct offset.nvec is always a |
| * power of two. pos0 must be nvec bit aligned. |
| */ |
| if (pos % msgvec) |
| pos += msgvec - (pos % msgvec); |
| else |
| flag = 0; |
| } while (flag); |
| |
| *pos0 = pos; |
| return 0; |
| } |
| |
| static void dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq) |
| { |
| unsigned int res, bit, val; |
| |
| res = (irq / 32) * 12; |
| bit = irq % 32; |
| dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val); |
| val &= ~(1 << bit); |
| dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val); |
| } |
| |
| static void clear_irq_range(struct pcie_port *pp, unsigned int irq_base, |
| unsigned int nvec, unsigned int pos) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < nvec; i++) { |
| irq_set_msi_desc_off(irq_base, i, NULL); |
| clear_bit(pos + i, pp->msi_irq_in_use); |
| /* Disable corresponding interrupt on MSI controller */ |
| if (pp->ops->msi_clear_irq) |
| pp->ops->msi_clear_irq(pp, pos + i); |
| else |
| dw_pcie_msi_clear_irq(pp, pos + i); |
| } |
| } |
| |
| static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq) |
| { |
| unsigned int res, bit, val; |
| |
| res = (irq / 32) * 12; |
| bit = irq % 32; |
| dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val); |
| val |= 1 << bit; |
| dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val); |
| } |
| |
| static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos) |
| { |
| int irq, pos0, pos1, i; |
| struct pcie_port *pp = sys_to_pcie(desc->dev->bus->sysdata); |
| |
| if (!pp) { |
| BUG(); |
| return -EINVAL; |
| } |
| |
| pos0 = find_first_zero_bit(pp->msi_irq_in_use, |
| MAX_MSI_IRQS); |
| if (pos0 % no_irqs) { |
| if (find_valid_pos0(pp, no_irqs, pos0, &pos0)) |
| goto no_valid_irq; |
| } |
| if (no_irqs > 1) { |
| pos1 = find_next_bit(pp->msi_irq_in_use, |
| MAX_MSI_IRQS, pos0); |
| /* there must be nvec number of consecutive free bits */ |
| while ((pos1 - pos0) < no_irqs) { |
| if (find_valid_pos0(pp, no_irqs, pos1, &pos0)) |
| goto no_valid_irq; |
| pos1 = find_next_bit(pp->msi_irq_in_use, |
| MAX_MSI_IRQS, pos0); |
| } |
| } |
| |
| irq = irq_find_mapping(pp->irq_domain, pos0); |
| if (!irq) |
| goto no_valid_irq; |
| |
| /* |
| * irq_create_mapping (called from dw_pcie_host_init) pre-allocates |
| * descs so there is no need to allocate descs here. We can therefore |
| * assume that if irq_find_mapping above returns non-zero, then the |
| * descs are also successfully allocated. |
| */ |
| |
| for (i = 0; i < no_irqs; i++) { |
| if (irq_set_msi_desc_off(irq, i, desc) != 0) { |
| clear_irq_range(pp, irq, i, pos0); |
| goto no_valid_irq; |
| } |
| set_bit(pos0 + i, pp->msi_irq_in_use); |
| /*Enable corresponding interrupt in MSI interrupt controller */ |
| if (pp->ops->msi_set_irq) |
| pp->ops->msi_set_irq(pp, pos0 + i); |
| else |
| dw_pcie_msi_set_irq(pp, pos0 + i); |
| } |
| |
| *pos = pos0; |
| return irq; |
| |
| no_valid_irq: |
| *pos = pos0; |
| return -ENOSPC; |
| } |
| |
| static void clear_irq(unsigned int irq) |
| { |
| unsigned int pos, nvec; |
| struct msi_desc *msi; |
| struct pcie_port *pp; |
| struct irq_data *data = irq_get_irq_data(irq); |
| |
| /* get the port structure */ |
| msi = irq_data_get_msi(data); |
| pp = sys_to_pcie(msi->dev->bus->sysdata); |
| if (!pp) { |
| BUG(); |
| return; |
| } |
| |
| /* undo what was done in assign_irq */ |
| pos = data->hwirq; |
| nvec = 1 << msi->msi_attrib.multiple; |
| |
| clear_irq_range(pp, irq, nvec, pos); |
| |
| /* all irqs cleared; reset attributes */ |
| msi->irq = 0; |
| msi->msi_attrib.multiple = 0; |
| } |
| |
| static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev, |
| struct msi_desc *desc) |
| { |
| int irq, pos, msgvec; |
| u16 msg_ctr; |
| struct msi_msg msg; |
| struct pcie_port *pp = sys_to_pcie(pdev->bus->sysdata); |
| |
| if (!pp) { |
| BUG(); |
| return -EINVAL; |
| } |
| |
| pci_read_config_word(pdev, desc->msi_attrib.pos+PCI_MSI_FLAGS, |
| &msg_ctr); |
| msgvec = (msg_ctr&PCI_MSI_FLAGS_QSIZE) >> 4; |
| if (msgvec == 0) |
| msgvec = (msg_ctr & PCI_MSI_FLAGS_QMASK) >> 1; |
| if (msgvec > 5) |
| msgvec = 0; |
| |
| irq = assign_irq((1 << msgvec), desc, &pos); |
| if (irq < 0) |
| return irq; |
| |
| /* |
| * write_msi_msg() will update PCI_MSI_FLAGS so there is |
| * no need to explicitly call pci_write_config_word(). |
| */ |
| desc->msi_attrib.multiple = msgvec; |
| |
| if (pp->ops->get_msi_data) |
| msg.address_lo = pp->ops->get_msi_data(pp); |
| else |
| msg.address_lo = virt_to_phys((void *)pp->msi_data); |
| msg.address_hi = 0x0; |
| msg.data = pos; |
| write_msi_msg(irq, &msg); |
| |
| return 0; |
| } |
| |
| static void dw_msi_teardown_irq(struct msi_chip *chip, unsigned int irq) |
| { |
| clear_irq(irq); |
| } |
| |
| static struct msi_chip dw_pcie_msi_chip = { |
| .setup_irq = dw_msi_setup_irq, |
| .teardown_irq = dw_msi_teardown_irq, |
| }; |
| |
| int dw_pcie_link_up(struct pcie_port *pp) |
| { |
| if (pp->ops->link_up) |
| return pp->ops->link_up(pp); |
| else |
| return 0; |
| } |
| |
| static int dw_pcie_msi_map(struct irq_domain *domain, unsigned int irq, |
| irq_hw_number_t hwirq) |
| { |
| irq_set_chip_and_handler(irq, &dw_msi_irq_chip, handle_simple_irq); |
| irq_set_chip_data(irq, domain->host_data); |
| set_irq_flags(irq, IRQF_VALID); |
| |
| return 0; |
| } |
| |
| static const struct irq_domain_ops msi_domain_ops = { |
| .map = dw_pcie_msi_map, |
| }; |
| |
| int __init dw_pcie_host_init(struct pcie_port *pp) |
| { |
| struct device_node *np = pp->dev->of_node; |
| struct platform_device *pdev = to_platform_device(pp->dev); |
| struct of_pci_range range; |
| struct of_pci_range_parser parser; |
| struct resource *cfg_res; |
| u32 val, na, ns; |
| const __be32 *addrp; |
| int i, index; |
| |
| /* Find the address cell size and the number of cells in order to get |
| * the untranslated address. |
| */ |
| of_property_read_u32(np, "#address-cells", &na); |
| ns = of_n_size_cells(np); |
| |
| cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config"); |
| if (cfg_res) { |
| pp->config.cfg0_size = resource_size(cfg_res)/2; |
| pp->config.cfg1_size = resource_size(cfg_res)/2; |
| pp->cfg0_base = cfg_res->start; |
| pp->cfg1_base = cfg_res->start + pp->config.cfg0_size; |
| |
| /* Find the untranslated configuration space address */ |
| index = of_property_match_string(np, "reg-names", "config"); |
| addrp = of_get_address(np, index, false, false); |
| pp->cfg0_mod_base = of_read_number(addrp, ns); |
| pp->cfg1_mod_base = pp->cfg0_mod_base + pp->config.cfg0_size; |
| } else { |
| dev_err(pp->dev, "missing *config* reg space\n"); |
| } |
| |
| if (of_pci_range_parser_init(&parser, np)) { |
| dev_err(pp->dev, "missing ranges property\n"); |
| return -EINVAL; |
| } |
| |
| /* Get the I/O and memory ranges from DT */ |
| for_each_of_pci_range(&parser, &range) { |
| unsigned long restype = range.flags & IORESOURCE_TYPE_BITS; |
| if (restype == IORESOURCE_IO) { |
| of_pci_range_to_resource(&range, np, &pp->io); |
| pp->io.name = "I/O"; |
| pp->io.start = max_t(resource_size_t, |
| PCIBIOS_MIN_IO, |
| range.pci_addr + global_io_offset); |
| pp->io.end = min_t(resource_size_t, |
| IO_SPACE_LIMIT, |
| range.pci_addr + range.size |
| + global_io_offset); |
| pp->config.io_size = resource_size(&pp->io); |
| pp->config.io_bus_addr = range.pci_addr; |
| pp->io_base = range.cpu_addr; |
| |
| /* Find the untranslated IO space address */ |
| pp->io_mod_base = of_read_number(parser.range - |
| parser.np + na, ns); |
| } |
| if (restype == IORESOURCE_MEM) { |
| of_pci_range_to_resource(&range, np, &pp->mem); |
| pp->mem.name = "MEM"; |
| pp->config.mem_size = resource_size(&pp->mem); |
| pp->config.mem_bus_addr = range.pci_addr; |
| |
| /* Find the untranslated MEM space address */ |
| pp->mem_mod_base = of_read_number(parser.range - |
| parser.np + na, ns); |
| } |
| if (restype == 0) { |
| of_pci_range_to_resource(&range, np, &pp->cfg); |
| pp->config.cfg0_size = resource_size(&pp->cfg)/2; |
| pp->config.cfg1_size = resource_size(&pp->cfg)/2; |
| pp->cfg0_base = pp->cfg.start; |
| pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size; |
| |
| /* Find the untranslated configuration space address */ |
| pp->cfg0_mod_base = of_read_number(parser.range - |
| parser.np + na, ns); |
| pp->cfg1_mod_base = pp->cfg0_mod_base + |
| pp->config.cfg0_size; |
| } |
| } |
| |
| if (!pp->dbi_base) { |
| pp->dbi_base = devm_ioremap(pp->dev, pp->cfg.start, |
| resource_size(&pp->cfg)); |
| if (!pp->dbi_base) { |
| dev_err(pp->dev, "error with ioremap\n"); |
| return -ENOMEM; |
| } |
| } |
| |
| pp->mem_base = pp->mem.start; |
| |
| pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base, |
| pp->config.cfg0_size); |
| if (!pp->va_cfg0_base) { |
| dev_err(pp->dev, "error with ioremap in function\n"); |
| return -ENOMEM; |
| } |
| pp->va_cfg1_base = devm_ioremap(pp->dev, pp->cfg1_base, |
| pp->config.cfg1_size); |
| if (!pp->va_cfg1_base) { |
| dev_err(pp->dev, "error with ioremap\n"); |
| return -ENOMEM; |
| } |
| |
| if (of_property_read_u32(np, "num-lanes", &pp->lanes)) { |
| dev_err(pp->dev, "Failed to parse the number of lanes\n"); |
| return -EINVAL; |
| } |
| |
| if (IS_ENABLED(CONFIG_PCI_MSI)) { |
| pp->irq_domain = irq_domain_add_linear(pp->dev->of_node, |
| MAX_MSI_IRQS, &msi_domain_ops, |
| &dw_pcie_msi_chip); |
| if (!pp->irq_domain) { |
| dev_err(pp->dev, "irq domain init failed\n"); |
| return -ENXIO; |
| } |
| |
| for (i = 0; i < MAX_MSI_IRQS; i++) |
| irq_create_mapping(pp->irq_domain, i); |
| } |
| |
| if (pp->ops->host_init) |
| pp->ops->host_init(pp); |
| |
| dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0); |
| |
| /* program correct class for RC */ |
| dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI); |
| |
| dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val); |
| val |= PORT_LOGIC_SPEED_CHANGE; |
| dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val); |
| |
| dw_pci.nr_controllers = 1; |
| dw_pci.private_data = (void **)&pp; |
| |
| pci_common_init_dev(pp->dev, &dw_pci); |
| pci_assign_unassigned_resources(); |
| #ifdef CONFIG_PCI_DOMAINS |
| dw_pci.domain++; |
| #endif |
| |
| return 0; |
| } |
| |
| static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev) |
| { |
| /* Program viewport 0 : OUTBOUND : CFG0 */ |
| dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0, |
| PCIE_ATU_VIEWPORT); |
| dw_pcie_writel_rc(pp, pp->cfg0_mod_base, PCIE_ATU_LOWER_BASE); |
| dw_pcie_writel_rc(pp, (pp->cfg0_mod_base >> 32), PCIE_ATU_UPPER_BASE); |
| dw_pcie_writel_rc(pp, pp->cfg0_mod_base + pp->config.cfg0_size - 1, |
| PCIE_ATU_LIMIT); |
| dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET); |
| dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET); |
| dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG0, PCIE_ATU_CR1); |
| dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2); |
| } |
| |
| static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev) |
| { |
| /* Program viewport 1 : OUTBOUND : CFG1 */ |
| dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, |
| PCIE_ATU_VIEWPORT); |
| dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1); |
| dw_pcie_writel_rc(pp, pp->cfg1_mod_base, PCIE_ATU_LOWER_BASE); |
| dw_pcie_writel_rc(pp, (pp->cfg1_mod_base >> 32), PCIE_ATU_UPPER_BASE); |
| dw_pcie_writel_rc(pp, pp->cfg1_mod_base + pp->config.cfg1_size - 1, |
| PCIE_ATU_LIMIT); |
| dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET); |
| dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET); |
| dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2); |
| } |
| |
| static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp) |
| { |
| /* Program viewport 0 : OUTBOUND : MEM */ |
| dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0, |
| PCIE_ATU_VIEWPORT); |
| dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1); |
| dw_pcie_writel_rc(pp, pp->mem_mod_base, PCIE_ATU_LOWER_BASE); |
| dw_pcie_writel_rc(pp, (pp->mem_mod_base >> 32), PCIE_ATU_UPPER_BASE); |
| dw_pcie_writel_rc(pp, pp->mem_mod_base + pp->config.mem_size - 1, |
| PCIE_ATU_LIMIT); |
| dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET); |
| dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr), |
| PCIE_ATU_UPPER_TARGET); |
| dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2); |
| } |
| |
| static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp) |
| { |
| /* Program viewport 1 : OUTBOUND : IO */ |
| dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, |
| PCIE_ATU_VIEWPORT); |
| dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1); |
| dw_pcie_writel_rc(pp, pp->io_mod_base, PCIE_ATU_LOWER_BASE); |
| dw_pcie_writel_rc(pp, (pp->io_mod_base >> 32), PCIE_ATU_UPPER_BASE); |
| dw_pcie_writel_rc(pp, pp->io_mod_base + pp->config.io_size - 1, |
| PCIE_ATU_LIMIT); |
| dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET); |
| dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr), |
| PCIE_ATU_UPPER_TARGET); |
| dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2); |
| } |
| |
| static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, |
| u32 devfn, int where, int size, u32 *val) |
| { |
| int ret = PCIBIOS_SUCCESSFUL; |
| u32 address, busdev; |
| |
| busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) | |
| PCIE_ATU_FUNC(PCI_FUNC(devfn)); |
| address = where & ~0x3; |
| |
| if (bus->parent->number == pp->root_bus_nr) { |
| dw_pcie_prog_viewport_cfg0(pp, busdev); |
| ret = dw_pcie_cfg_read(pp->va_cfg0_base + address, where, size, |
| val); |
| dw_pcie_prog_viewport_mem_outbound(pp); |
| } else { |
| dw_pcie_prog_viewport_cfg1(pp, busdev); |
| ret = dw_pcie_cfg_read(pp->va_cfg1_base + address, where, size, |
| val); |
| dw_pcie_prog_viewport_io_outbound(pp); |
| } |
| |
| return ret; |
| } |
| |
| static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus, |
| u32 devfn, int where, int size, u32 val) |
| { |
| int ret = PCIBIOS_SUCCESSFUL; |
| u32 address, busdev; |
| |
| busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) | |
| PCIE_ATU_FUNC(PCI_FUNC(devfn)); |
| address = where & ~0x3; |
| |
| if (bus->parent->number == pp->root_bus_nr) { |
| dw_pcie_prog_viewport_cfg0(pp, busdev); |
| ret = dw_pcie_cfg_write(pp->va_cfg0_base + address, where, size, |
| val); |
| dw_pcie_prog_viewport_mem_outbound(pp); |
| } else { |
| dw_pcie_prog_viewport_cfg1(pp, busdev); |
| ret = dw_pcie_cfg_write(pp->va_cfg1_base + address, where, size, |
| val); |
| dw_pcie_prog_viewport_io_outbound(pp); |
| } |
| |
| return ret; |
| } |
| |
| static int dw_pcie_valid_config(struct pcie_port *pp, |
| struct pci_bus *bus, int dev) |
| { |
| /* If there is no link, then there is no device */ |
| if (bus->number != pp->root_bus_nr) { |
| if (!dw_pcie_link_up(pp)) |
| return 0; |
| } |
| |
| /* access only one slot on each root port */ |
| if (bus->number == pp->root_bus_nr && dev > 0) |
| return 0; |
| |
| /* |
| * do not read more than one device on the bus directly attached |
| * to RC's (Virtual Bridge's) DS side. |
| */ |
| if (bus->primary == pp->root_bus_nr && dev > 0) |
| return 0; |
| |
| return 1; |
| } |
| |
| static int dw_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, |
| int size, u32 *val) |
| { |
| struct pcie_port *pp = sys_to_pcie(bus->sysdata); |
| int ret; |
| |
| if (!pp) { |
| BUG(); |
| return -EINVAL; |
| } |
| |
| if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0) { |
| *val = 0xffffffff; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| if (bus->number != pp->root_bus_nr) |
| if (pp->ops->rd_other_conf) |
| ret = pp->ops->rd_other_conf(pp, bus, devfn, |
| where, size, val); |
| else |
| ret = dw_pcie_rd_other_conf(pp, bus, devfn, |
| where, size, val); |
| else |
| ret = dw_pcie_rd_own_conf(pp, where, size, val); |
| |
| return ret; |
| } |
| |
| static int dw_pcie_wr_conf(struct pci_bus *bus, u32 devfn, |
| int where, int size, u32 val) |
| { |
| struct pcie_port *pp = sys_to_pcie(bus->sysdata); |
| int ret; |
| |
| if (!pp) { |
| BUG(); |
| return -EINVAL; |
| } |
| |
| if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| if (bus->number != pp->root_bus_nr) |
| if (pp->ops->wr_other_conf) |
| ret = pp->ops->wr_other_conf(pp, bus, devfn, |
| where, size, val); |
| else |
| ret = dw_pcie_wr_other_conf(pp, bus, devfn, |
| where, size, val); |
| else |
| ret = dw_pcie_wr_own_conf(pp, where, size, val); |
| |
| return ret; |
| } |
| |
| static struct pci_ops dw_pcie_ops = { |
| .read = dw_pcie_rd_conf, |
| .write = dw_pcie_wr_conf, |
| }; |
| |
| static int dw_pcie_setup(int nr, struct pci_sys_data *sys) |
| { |
| struct pcie_port *pp; |
| |
| pp = sys_to_pcie(sys); |
| |
| if (!pp) |
| return 0; |
| |
| if (global_io_offset < SZ_1M && pp->config.io_size > 0) { |
| sys->io_offset = global_io_offset - pp->config.io_bus_addr; |
| pci_ioremap_io(global_io_offset, pp->io_base); |
| global_io_offset += SZ_64K; |
| pci_add_resource_offset(&sys->resources, &pp->io, |
| sys->io_offset); |
| } |
| |
| sys->mem_offset = pp->mem.start - pp->config.mem_bus_addr; |
| pci_add_resource_offset(&sys->resources, &pp->mem, sys->mem_offset); |
| |
| return 1; |
| } |
| |
| static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys) |
| { |
| struct pci_bus *bus; |
| struct pcie_port *pp = sys_to_pcie(sys); |
| |
| if (pp) { |
| pp->root_bus_nr = sys->busnr; |
| bus = pci_scan_root_bus(pp->dev, sys->busnr, &dw_pcie_ops, |
| sys, &sys->resources); |
| } else { |
| bus = NULL; |
| BUG(); |
| } |
| |
| return bus; |
| } |
| |
| static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata); |
| int irq; |
| |
| irq = of_irq_parse_and_map_pci(dev, slot, pin); |
| if (!irq) |
| irq = pp->irq; |
| |
| return irq; |
| } |
| |
| static void dw_pcie_add_bus(struct pci_bus *bus) |
| { |
| if (IS_ENABLED(CONFIG_PCI_MSI)) { |
| struct pcie_port *pp = sys_to_pcie(bus->sysdata); |
| |
| dw_pcie_msi_chip.dev = pp->dev; |
| bus->msi = &dw_pcie_msi_chip; |
| } |
| } |
| |
| static struct hw_pci dw_pci = { |
| .setup = dw_pcie_setup, |
| .scan = dw_pcie_scan_bus, |
| .map_irq = dw_pcie_map_irq, |
| .add_bus = dw_pcie_add_bus, |
| }; |
| |
| void dw_pcie_setup_rc(struct pcie_port *pp) |
| { |
| struct pcie_port_info *config = &pp->config; |
| u32 val; |
| u32 membase; |
| u32 memlimit; |
| |
| /* set the number of lanes */ |
| dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val); |
| val &= ~PORT_LINK_MODE_MASK; |
| switch (pp->lanes) { |
| case 1: |
| val |= PORT_LINK_MODE_1_LANES; |
| break; |
| case 2: |
| val |= PORT_LINK_MODE_2_LANES; |
| break; |
| case 4: |
| val |= PORT_LINK_MODE_4_LANES; |
| break; |
| } |
| dw_pcie_writel_rc(pp, val, PCIE_PORT_LINK_CONTROL); |
| |
| /* set link width speed control register */ |
| dw_pcie_readl_rc(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, &val); |
| val &= ~PORT_LOGIC_LINK_WIDTH_MASK; |
| switch (pp->lanes) { |
| case 1: |
| val |= PORT_LOGIC_LINK_WIDTH_1_LANES; |
| break; |
| case 2: |
| val |= PORT_LOGIC_LINK_WIDTH_2_LANES; |
| break; |
| case 4: |
| val |= PORT_LOGIC_LINK_WIDTH_4_LANES; |
| break; |
| } |
| dw_pcie_writel_rc(pp, val, PCIE_LINK_WIDTH_SPEED_CONTROL); |
| |
| /* setup RC BARs */ |
| dw_pcie_writel_rc(pp, 0x00000004, PCI_BASE_ADDRESS_0); |
| dw_pcie_writel_rc(pp, 0x00000000, PCI_BASE_ADDRESS_1); |
| |
| /* setup interrupt pins */ |
| dw_pcie_readl_rc(pp, PCI_INTERRUPT_LINE, &val); |
| val &= 0xffff00ff; |
| val |= 0x00000100; |
| dw_pcie_writel_rc(pp, val, PCI_INTERRUPT_LINE); |
| |
| /* setup bus numbers */ |
| dw_pcie_readl_rc(pp, PCI_PRIMARY_BUS, &val); |
| val &= 0xff000000; |
| val |= 0x00010100; |
| dw_pcie_writel_rc(pp, val, PCI_PRIMARY_BUS); |
| |
| /* setup memory base, memory limit */ |
| membase = ((u32)pp->mem_base & 0xfff00000) >> 16; |
| memlimit = (config->mem_size + (u32)pp->mem_base) & 0xfff00000; |
| val = memlimit | membase; |
| dw_pcie_writel_rc(pp, val, PCI_MEMORY_BASE); |
| |
| /* setup command register */ |
| dw_pcie_readl_rc(pp, PCI_COMMAND, &val); |
| val &= 0xffff0000; |
| val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | |
| PCI_COMMAND_MASTER | PCI_COMMAND_SERR; |
| dw_pcie_writel_rc(pp, val, PCI_COMMAND); |
| } |
| |
| MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); |
| MODULE_DESCRIPTION("Designware PCIe host controller driver"); |
| MODULE_LICENSE("GPL v2"); |