| /* $Id: setup.c,v 1.126 2001/11/13 00:49:27 davem Exp $ |
| * linux/arch/sparc/kernel/setup.c |
| * |
| * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) |
| * Copyright (C) 2000 Anton Blanchard (anton@samba.org) |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/stddef.h> |
| #include <linux/unistd.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/initrd.h> |
| #include <asm/smp.h> |
| #include <linux/user.h> |
| #include <linux/a.out.h> |
| #include <linux/screen_info.h> |
| #include <linux/delay.h> |
| #include <linux/fs.h> |
| #include <linux/seq_file.h> |
| #include <linux/syscalls.h> |
| #include <linux/kdev_t.h> |
| #include <linux/major.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/console.h> |
| #include <linux/spinlock.h> |
| #include <linux/root_dev.h> |
| #include <linux/cpu.h> |
| |
| #include <asm/system.h> |
| #include <asm/io.h> |
| #include <asm/processor.h> |
| #include <asm/oplib.h> |
| #include <asm/page.h> |
| #include <asm/pgtable.h> |
| #include <asm/traps.h> |
| #include <asm/vaddrs.h> |
| #include <asm/kdebug.h> |
| #include <asm/mbus.h> |
| #include <asm/idprom.h> |
| #include <asm/machines.h> |
| #include <asm/cpudata.h> |
| #include <asm/setup.h> |
| |
| struct screen_info screen_info = { |
| 0, 0, /* orig-x, orig-y */ |
| 0, /* unused */ |
| 0, /* orig-video-page */ |
| 0, /* orig-video-mode */ |
| 128, /* orig-video-cols */ |
| 0,0,0, /* ega_ax, ega_bx, ega_cx */ |
| 54, /* orig-video-lines */ |
| 0, /* orig-video-isVGA */ |
| 16 /* orig-video-points */ |
| }; |
| |
| /* Typing sync at the prom prompt calls the function pointed to by |
| * romvec->pv_synchook which I set to the following function. |
| * This should sync all filesystems and return, for now it just |
| * prints out pretty messages and returns. |
| */ |
| |
| extern unsigned long trapbase; |
| void (*prom_palette)(int); |
| |
| /* Pretty sick eh? */ |
| void prom_sync_me(void) |
| { |
| unsigned long prom_tbr, flags; |
| |
| /* XXX Badly broken. FIX! - Anton */ |
| local_irq_save(flags); |
| __asm__ __volatile__("rd %%tbr, %0\n\t" : "=r" (prom_tbr)); |
| __asm__ __volatile__("wr %0, 0x0, %%tbr\n\t" |
| "nop\n\t" |
| "nop\n\t" |
| "nop\n\t" : : "r" (&trapbase)); |
| |
| if (prom_palette) |
| prom_palette(1); |
| prom_printf("PROM SYNC COMMAND...\n"); |
| show_free_areas(); |
| if(current->pid != 0) { |
| local_irq_enable(); |
| sys_sync(); |
| local_irq_disable(); |
| } |
| prom_printf("Returning to prom\n"); |
| |
| __asm__ __volatile__("wr %0, 0x0, %%tbr\n\t" |
| "nop\n\t" |
| "nop\n\t" |
| "nop\n\t" : : "r" (prom_tbr)); |
| local_irq_restore(flags); |
| |
| return; |
| } |
| |
| unsigned int boot_flags __initdata = 0; |
| #define BOOTME_DEBUG 0x1 |
| |
| /* Exported for mm/init.c:paging_init. */ |
| unsigned long cmdline_memory_size __initdata = 0; |
| |
| static void |
| prom_console_write(struct console *con, const char *s, unsigned n) |
| { |
| prom_write(s, n); |
| } |
| |
| static struct console prom_debug_console = { |
| .name = "debug", |
| .write = prom_console_write, |
| .flags = CON_PRINTBUFFER, |
| .index = -1, |
| }; |
| |
| /* |
| * Process kernel command line switches that are specific to the |
| * SPARC or that require special low-level processing. |
| */ |
| static void __init process_switch(char c) |
| { |
| switch (c) { |
| case 'd': |
| boot_flags |= BOOTME_DEBUG; |
| break; |
| case 's': |
| break; |
| case 'h': |
| prom_printf("boot_flags_init: Halt!\n"); |
| prom_halt(); |
| break; |
| case 'p': |
| /* Use PROM debug console. */ |
| register_console(&prom_debug_console); |
| break; |
| default: |
| printk("Unknown boot switch (-%c)\n", c); |
| break; |
| } |
| } |
| |
| static void __init process_console(char *commands) |
| { |
| serial_console = 0; |
| commands += 8; |
| /* Linux-style serial */ |
| if (!strncmp(commands, "ttyS", 4)) |
| serial_console = simple_strtoul(commands + 4, NULL, 10) + 1; |
| else if (!strncmp(commands, "tty", 3)) { |
| char c = *(commands + 3); |
| /* Solaris-style serial */ |
| if (c == 'a' || c == 'b') |
| serial_console = c - 'a' + 1; |
| /* else Linux-style fbcon, not serial */ |
| } |
| #if defined(CONFIG_PROM_CONSOLE) |
| if (!strncmp(commands, "prom", 4)) { |
| char *p; |
| |
| for (p = commands - 8; *p && *p != ' '; p++) |
| *p = ' '; |
| conswitchp = &prom_con; |
| } |
| #endif |
| } |
| |
| static void __init boot_flags_init(char *commands) |
| { |
| while (*commands) { |
| /* Move to the start of the next "argument". */ |
| while (*commands && *commands == ' ') |
| commands++; |
| |
| /* Process any command switches, otherwise skip it. */ |
| if (*commands == '\0') |
| break; |
| if (*commands == '-') { |
| commands++; |
| while (*commands && *commands != ' ') |
| process_switch(*commands++); |
| continue; |
| } |
| if (!strncmp(commands, "console=", 8)) { |
| process_console(commands); |
| } else if (!strncmp(commands, "mem=", 4)) { |
| /* |
| * "mem=XXX[kKmM] overrides the PROM-reported |
| * memory size. |
| */ |
| cmdline_memory_size = simple_strtoul(commands + 4, |
| &commands, 0); |
| if (*commands == 'K' || *commands == 'k') { |
| cmdline_memory_size <<= 10; |
| commands++; |
| } else if (*commands=='M' || *commands=='m') { |
| cmdline_memory_size <<= 20; |
| commands++; |
| } |
| } |
| while (*commands && *commands != ' ') |
| commands++; |
| } |
| } |
| |
| /* This routine will in the future do all the nasty prom stuff |
| * to probe for the mmu type and its parameters, etc. This will |
| * also be where SMP things happen plus the Sparc specific memory |
| * physical memory probe as on the alpha. |
| */ |
| |
| extern int prom_probe_memory(void); |
| extern void sun4c_probe_vac(void); |
| extern char cputypval; |
| extern unsigned long start, end; |
| extern void panic_setup(char *, int *); |
| |
| extern unsigned short root_flags; |
| extern unsigned short root_dev; |
| extern unsigned short ram_flags; |
| #define RAMDISK_IMAGE_START_MASK 0x07FF |
| #define RAMDISK_PROMPT_FLAG 0x8000 |
| #define RAMDISK_LOAD_FLAG 0x4000 |
| |
| extern int root_mountflags; |
| |
| char reboot_command[COMMAND_LINE_SIZE]; |
| enum sparc_cpu sparc_cpu_model; |
| |
| struct tt_entry *sparc_ttable; |
| |
| struct pt_regs fake_swapper_regs; |
| |
| void __init setup_arch(char **cmdline_p) |
| { |
| int i; |
| unsigned long highest_paddr; |
| |
| sparc_ttable = (struct tt_entry *) &start; |
| |
| /* Initialize PROM console and command line. */ |
| *cmdline_p = prom_getbootargs(); |
| strcpy(boot_command_line, *cmdline_p); |
| |
| /* Set sparc_cpu_model */ |
| sparc_cpu_model = sun_unknown; |
| if(!strcmp(&cputypval,"sun4 ")) { sparc_cpu_model=sun4; } |
| if(!strcmp(&cputypval,"sun4c")) { sparc_cpu_model=sun4c; } |
| if(!strcmp(&cputypval,"sun4m")) { sparc_cpu_model=sun4m; } |
| if(!strcmp(&cputypval,"sun4s")) { sparc_cpu_model=sun4m; } /* CP-1200 with PROM 2.30 -E */ |
| if(!strcmp(&cputypval,"sun4d")) { sparc_cpu_model=sun4d; } |
| if(!strcmp(&cputypval,"sun4e")) { sparc_cpu_model=sun4e; } |
| if(!strcmp(&cputypval,"sun4u")) { sparc_cpu_model=sun4u; } |
| |
| #ifdef CONFIG_SUN4 |
| if (sparc_cpu_model != sun4) { |
| prom_printf("This kernel is for Sun4 architecture only.\n"); |
| prom_halt(); |
| } |
| #endif |
| printk("ARCH: "); |
| switch(sparc_cpu_model) { |
| case sun4: |
| printk("SUN4\n"); |
| break; |
| case sun4c: |
| printk("SUN4C\n"); |
| break; |
| case sun4m: |
| printk("SUN4M\n"); |
| break; |
| case sun4d: |
| printk("SUN4D\n"); |
| break; |
| case sun4e: |
| printk("SUN4E\n"); |
| break; |
| case sun4u: |
| printk("SUN4U\n"); |
| break; |
| default: |
| printk("UNKNOWN!\n"); |
| break; |
| }; |
| |
| #ifdef CONFIG_DUMMY_CONSOLE |
| conswitchp = &dummy_con; |
| #elif defined(CONFIG_PROM_CONSOLE) |
| conswitchp = &prom_con; |
| #endif |
| boot_flags_init(*cmdline_p); |
| |
| idprom_init(); |
| if (ARCH_SUN4C_SUN4) |
| sun4c_probe_vac(); |
| load_mmu(); |
| (void) prom_probe_memory(); |
| |
| phys_base = 0xffffffffUL; |
| highest_paddr = 0UL; |
| for (i = 0; sp_banks[i].num_bytes != 0; i++) { |
| unsigned long top; |
| |
| if (sp_banks[i].base_addr < phys_base) |
| phys_base = sp_banks[i].base_addr; |
| top = sp_banks[i].base_addr + |
| sp_banks[i].num_bytes; |
| if (highest_paddr < top) |
| highest_paddr = top; |
| } |
| pfn_base = phys_base >> PAGE_SHIFT; |
| |
| if (!root_flags) |
| root_mountflags &= ~MS_RDONLY; |
| ROOT_DEV = old_decode_dev(root_dev); |
| #ifdef CONFIG_BLK_DEV_RAM |
| rd_image_start = ram_flags & RAMDISK_IMAGE_START_MASK; |
| rd_prompt = ((ram_flags & RAMDISK_PROMPT_FLAG) != 0); |
| rd_doload = ((ram_flags & RAMDISK_LOAD_FLAG) != 0); |
| #endif |
| |
| prom_setsync(prom_sync_me); |
| |
| if((boot_flags&BOOTME_DEBUG) && (linux_dbvec!=0) && |
| ((*(short *)linux_dbvec) != -1)) { |
| printk("Booted under KADB. Syncing trap table.\n"); |
| (*(linux_dbvec->teach_debugger))(); |
| } |
| |
| init_mm.context = (unsigned long) NO_CONTEXT; |
| init_task.thread.kregs = &fake_swapper_regs; |
| |
| paging_init(); |
| |
| smp_setup_cpu_possible_map(); |
| } |
| |
| static int __init set_preferred_console(void) |
| { |
| int idev, odev; |
| |
| /* The user has requested a console so this is already set up. */ |
| if (serial_console >= 0) |
| return -EBUSY; |
| |
| idev = prom_query_input_device(); |
| odev = prom_query_output_device(); |
| if (idev == PROMDEV_IKBD && odev == PROMDEV_OSCREEN) { |
| serial_console = 0; |
| } else if (idev == PROMDEV_ITTYA && odev == PROMDEV_OTTYA) { |
| serial_console = 1; |
| } else if (idev == PROMDEV_ITTYB && odev == PROMDEV_OTTYB) { |
| serial_console = 2; |
| } else if (idev == PROMDEV_I_UNK && odev == PROMDEV_OTTYA) { |
| prom_printf("MrCoffee ttya\n"); |
| serial_console = 1; |
| } else if (idev == PROMDEV_I_UNK && odev == PROMDEV_OSCREEN) { |
| serial_console = 0; |
| prom_printf("MrCoffee keyboard\n"); |
| } else { |
| prom_printf("Confusing console (idev %d, odev %d)\n", |
| idev, odev); |
| serial_console = 1; |
| } |
| |
| if (serial_console) |
| return add_preferred_console("ttyS", serial_console - 1, NULL); |
| |
| return -ENODEV; |
| } |
| console_initcall(set_preferred_console); |
| |
| extern char *sparc_cpu_type; |
| extern char *sparc_fpu_type; |
| |
| static int ncpus_probed; |
| |
| static int show_cpuinfo(struct seq_file *m, void *__unused) |
| { |
| seq_printf(m, |
| "cpu\t\t: %s\n" |
| "fpu\t\t: %s\n" |
| "promlib\t\t: Version %d Revision %d\n" |
| "prom\t\t: %d.%d\n" |
| "type\t\t: %s\n" |
| "ncpus probed\t: %d\n" |
| "ncpus active\t: %d\n" |
| #ifndef CONFIG_SMP |
| "CPU0Bogo\t: %lu.%02lu\n" |
| "CPU0ClkTck\t: %ld\n" |
| #endif |
| , |
| sparc_cpu_type ? sparc_cpu_type : "undetermined", |
| sparc_fpu_type ? sparc_fpu_type : "undetermined", |
| romvec->pv_romvers, |
| prom_rev, |
| romvec->pv_printrev >> 16, |
| romvec->pv_printrev & 0xffff, |
| &cputypval, |
| ncpus_probed, |
| num_online_cpus() |
| #ifndef CONFIG_SMP |
| , cpu_data(0).udelay_val/(500000/HZ), |
| (cpu_data(0).udelay_val/(5000/HZ)) % 100, |
| cpu_data(0).clock_tick |
| #endif |
| ); |
| |
| #ifdef CONFIG_SMP |
| smp_bogo(m); |
| #endif |
| mmu_info(m); |
| #ifdef CONFIG_SMP |
| smp_info(m); |
| #endif |
| return 0; |
| } |
| |
| static void *c_start(struct seq_file *m, loff_t *pos) |
| { |
| /* The pointer we are returning is arbitrary, |
| * it just has to be non-NULL and not IS_ERR |
| * in the success case. |
| */ |
| return *pos == 0 ? &c_start : NULL; |
| } |
| |
| static void *c_next(struct seq_file *m, void *v, loff_t *pos) |
| { |
| ++*pos; |
| return c_start(m, pos); |
| } |
| |
| static void c_stop(struct seq_file *m, void *v) |
| { |
| } |
| |
| struct seq_operations cpuinfo_op = { |
| .start =c_start, |
| .next = c_next, |
| .stop = c_stop, |
| .show = show_cpuinfo, |
| }; |
| |
| extern int stop_a_enabled; |
| |
| void sun_do_break(void) |
| { |
| if (!stop_a_enabled) |
| return; |
| |
| printk("\n"); |
| flush_user_windows(); |
| |
| prom_cmdline(); |
| } |
| |
| int serial_console = -1; |
| int stop_a_enabled = 1; |
| |
| static int __init topology_init(void) |
| { |
| int i, ncpus, err; |
| |
| /* Count the number of physically present processors in |
| * the machine, even on uniprocessor, so that /proc/cpuinfo |
| * output is consistent with 2.4.x |
| */ |
| ncpus = 0; |
| while (!cpu_find_by_instance(ncpus, NULL, NULL)) |
| ncpus++; |
| ncpus_probed = ncpus; |
| |
| err = 0; |
| for_each_online_cpu(i) { |
| struct cpu *p = kzalloc(sizeof(*p), GFP_KERNEL); |
| if (!p) |
| err = -ENOMEM; |
| else |
| register_cpu(p, i); |
| } |
| |
| return err; |
| } |
| |
| subsys_initcall(topology_init); |