| # |
| # Platform drivers |
| # All drivers here are currently for webcam support |
| |
| menuconfig V4L_PLATFORM_DRIVERS |
| bool "V4L platform devices" |
| depends on MEDIA_CAMERA_SUPPORT |
| default n |
| ---help--- |
| Say Y here to enable support for platform-specific V4L drivers. |
| |
| if V4L_PLATFORM_DRIVERS |
| |
| source "drivers/media/platform/marvell-ccic/Kconfig" |
| |
| config VIDEO_VIA_CAMERA |
| tristate "VIAFB camera controller support" |
| depends on FB_VIA |
| select VIDEOBUF_DMA_SG |
| select VIDEO_OV7670 |
| help |
| Driver support for the integrated camera controller in VIA |
| Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems |
| with ov7670 sensors. |
| |
| # |
| # Platform multimedia device configuration |
| # |
| |
| source "drivers/media/platform/davinci/Kconfig" |
| |
| source "drivers/media/platform/omap/Kconfig" |
| |
| source "drivers/media/platform/blackfin/Kconfig" |
| |
| config VIDEO_SH_VOU |
| tristate "SuperH VOU video output driver" |
| depends on MEDIA_CAMERA_SUPPORT |
| depends on VIDEO_DEV && ARCH_SHMOBILE |
| select VIDEOBUF_DMA_CONTIG |
| help |
| Support for the Video Output Unit (VOU) on SuperH SoCs. |
| |
| config VIDEO_VIU |
| tristate "Freescale VIU Video Driver" |
| depends on VIDEO_V4L2 && PPC_MPC512x |
| select VIDEOBUF_DMA_CONTIG |
| default y |
| ---help--- |
| Support for Freescale VIU video driver. This device captures |
| video data, or overlays video on DIU frame buffer. |
| |
| Say Y here if you want to enable VIU device on MPC5121e Rev2+. |
| In doubt, say N. |
| |
| config VIDEO_TIMBERDALE |
| tristate "Support for timberdale Video In/LogiWIN" |
| depends on VIDEO_V4L2 && I2C && DMADEVICES |
| select DMA_ENGINE |
| select TIMB_DMA |
| select VIDEO_ADV7180 |
| select VIDEOBUF_DMA_CONTIG |
| ---help--- |
| Add support for the Video In peripherial of the timberdale FPGA. |
| |
| config VIDEO_VINO |
| tristate "SGI Vino Video For Linux" |
| depends on I2C && SGI_IP22 && VIDEO_V4L2 |
| select VIDEO_SAA7191 if MEDIA_SUBDRV_AUTOSELECT |
| help |
| Say Y here to build in support for the Vino video input system found |
| on SGI Indy machines. |
| |
| config VIDEO_M32R_AR |
| tristate "AR devices" |
| depends on M32R && VIDEO_V4L2 |
| ---help--- |
| This is a video4linux driver for the Renesas AR (Artificial Retina) |
| camera module. |
| |
| config VIDEO_M32R_AR_M64278 |
| tristate "AR device with color module M64278(VGA)" |
| depends on PLAT_M32700UT |
| select VIDEO_M32R_AR |
| ---help--- |
| This is a video4linux driver for the Renesas AR (Artificial |
| Retina) with M64278E-800 camera module. |
| This module supports VGA(640x480 pixels) resolutions. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called arv. |
| |
| config VIDEO_OMAP2 |
| tristate "OMAP2 Camera Capture Interface driver" |
| depends on VIDEO_DEV && ARCH_OMAP2 && VIDEO_V4L2_INT_DEVICE |
| select VIDEOBUF_DMA_SG |
| ---help--- |
| This is a v4l2 driver for the TI OMAP2 camera capture interface |
| |
| config VIDEO_OMAP3 |
| tristate "OMAP 3 Camera support" |
| depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 |
| ---help--- |
| Driver for an OMAP 3 camera controller. |
| |
| config VIDEO_OMAP3_DEBUG |
| bool "OMAP 3 Camera debug messages" |
| depends on VIDEO_OMAP3 |
| ---help--- |
| Enable debug messages on OMAP 3 camera controller driver. |
| |
| config VIDEO_S3C_CAMIF |
| tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver" |
| depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
| depends on (PLAT_S3C64XX || PLAT_S3C24XX) && PM_RUNTIME |
| select VIDEOBUF2_DMA_CONTIG |
| ---help--- |
| This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera |
| host interface (CAMIF). |
| |
| To compile this driver as a module, choose M here: the module |
| will be called s3c-camif. |
| |
| source "drivers/media/platform/soc_camera/Kconfig" |
| source "drivers/media/platform/s5p-fimc/Kconfig" |
| source "drivers/media/platform/s5p-tv/Kconfig" |
| |
| endif # V4L_PLATFORM_DRIVERS |
| |
| menuconfig V4L_MEM2MEM_DRIVERS |
| bool "Memory-to-memory multimedia devices" |
| depends on VIDEO_V4L2 |
| depends on MEDIA_CAMERA_SUPPORT |
| default n |
| ---help--- |
| Say Y here to enable selecting drivers for V4L devices that |
| use system memory for both source and destination buffers, as opposed |
| to capture and output drivers, which use memory buffers for just |
| one of those. |
| |
| if V4L_MEM2MEM_DRIVERS |
| |
| config VIDEO_CODA |
| tristate "Chips&Media Coda multi-standard codec IP" |
| depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_MXC |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| select IRAM_ALLOC if SOC_IMX53 |
| ---help--- |
| Coda is a range of video codec IPs that supports |
| H.264, MPEG-4, and other video formats. |
| |
| config VIDEO_MEM2MEM_DEINTERLACE |
| tristate "Deinterlace support" |
| depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| Generic deinterlacing V4L2 driver. |
| |
| config VIDEO_SAMSUNG_S5P_G2D |
| tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| default n |
| ---help--- |
| This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D |
| 2d graphics accelerator. |
| |
| config VIDEO_SAMSUNG_S5P_JPEG |
| tristate "Samsung S5P/Exynos4 JPEG codec driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| ---help--- |
| This is a v4l2 driver for Samsung S5P and EXYNOS4 JPEG codec |
| |
| config VIDEO_SAMSUNG_S5P_MFC |
| tristate "Samsung S5P MFC Video Codec" |
| depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P |
| select VIDEOBUF2_DMA_CONTIG |
| default n |
| help |
| MFC 5.1 and 6.x driver for V4L2 |
| |
| config VIDEO_MX2_EMMAPRP |
| tristate "MX2 eMMa-PrP support" |
| depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27 |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| MX2X chips have a PrP that can be used to process buffers from |
| memory to memory. Operations include resizing and format |
| conversion. |
| |
| config VIDEO_SAMSUNG_EXYNOS_GSC |
| tristate "Samsung Exynos G-Scaler driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_EXYNOS5 |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler. |
| |
| config VIDEO_SH_VEU |
| tristate "SuperH VEU mem2mem video processing driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 && GENERIC_HARDIRQS |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| Support for the Video Engine Unit (VEU) on SuperH and |
| SH-Mobile SoCs. |
| |
| endif # V4L_MEM2MEM_DRIVERS |
| |
| menuconfig V4L_TEST_DRIVERS |
| bool "Media test drivers" |
| depends on MEDIA_CAMERA_SUPPORT |
| |
| if V4L_TEST_DRIVERS |
| config VIDEO_VIVI |
| tristate "Virtual Video Driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 |
| depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE |
| select FONT_8x16 |
| select VIDEOBUF2_VMALLOC |
| default n |
| ---help--- |
| Enables a virtual video driver. This device shows a color bar |
| and a timestamp, as a real device would generate by using V4L2 |
| api. |
| Say Y here if you want to test video apps or debug V4L devices. |
| In doubt, say N. |
| |
| config VIDEO_MEM2MEM_TESTDEV |
| tristate "Virtual test device for mem2mem framework" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| select VIDEOBUF2_VMALLOC |
| select V4L2_MEM2MEM_DEV |
| default n |
| ---help--- |
| This is a virtual test device for the memory-to-memory driver |
| framework. |
| endif #V4L_TEST_DRIVERS |