| /* |
| * drivers/gpu/drm/omapdrm/omap_drv.c |
| * |
| * Copyright (C) 2011 Texas Instruments |
| * Author: Rob Clark <rob@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/wait.h> |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_fb_helper.h> |
| |
| #include "omap_dmm_tiler.h" |
| #include "omap_drv.h" |
| |
| #define DRIVER_NAME MODULE_NAME |
| #define DRIVER_DESC "OMAP DRM" |
| #define DRIVER_DATE "20110917" |
| #define DRIVER_MAJOR 1 |
| #define DRIVER_MINOR 0 |
| #define DRIVER_PATCHLEVEL 0 |
| |
| static int num_crtc = CONFIG_DRM_OMAP_NUM_CRTCS; |
| |
| MODULE_PARM_DESC(num_crtc, "Number of overlays to use as CRTCs"); |
| module_param(num_crtc, int, 0600); |
| |
| /* |
| * mode config funcs |
| */ |
| |
| /* Notes about mapping DSS and DRM entities: |
| * CRTC: overlay |
| * encoder: manager.. with some extension to allow one primary CRTC |
| * and zero or more video CRTC's to be mapped to one encoder? |
| * connector: dssdev.. manager can be attached/detached from different |
| * devices |
| */ |
| |
| static void omap_fb_output_poll_changed(struct drm_device *dev) |
| { |
| struct omap_drm_private *priv = dev->dev_private; |
| DBG("dev=%p", dev); |
| if (priv->fbdev) |
| drm_fb_helper_hotplug_event(priv->fbdev); |
| } |
| |
| struct omap_atomic_state_commit { |
| struct work_struct work; |
| struct drm_device *dev; |
| struct drm_atomic_state *state; |
| u32 crtcs; |
| }; |
| |
| static void omap_atomic_wait_for_completion(struct drm_device *dev, |
| struct drm_atomic_state *old_state) |
| { |
| struct drm_crtc_state *old_crtc_state; |
| struct drm_crtc *crtc; |
| unsigned int i; |
| int ret; |
| |
| for_each_crtc_in_state(old_state, crtc, old_crtc_state, i) { |
| if (!crtc->state->enable) |
| continue; |
| |
| ret = omap_crtc_wait_pending(crtc); |
| |
| if (!ret) |
| dev_warn(dev->dev, |
| "atomic complete timeout (pipe %u)!\n", i); |
| } |
| } |
| |
| static void omap_atomic_complete(struct omap_atomic_state_commit *commit) |
| { |
| struct drm_device *dev = commit->dev; |
| struct omap_drm_private *priv = dev->dev_private; |
| struct drm_atomic_state *old_state = commit->state; |
| |
| /* Apply the atomic update. */ |
| dispc_runtime_get(); |
| |
| drm_atomic_helper_commit_modeset_disables(dev, old_state); |
| drm_atomic_helper_commit_planes(dev, old_state, 0); |
| drm_atomic_helper_commit_modeset_enables(dev, old_state); |
| |
| omap_atomic_wait_for_completion(dev, old_state); |
| |
| drm_atomic_helper_cleanup_planes(dev, old_state); |
| |
| dispc_runtime_put(); |
| |
| drm_atomic_state_free(old_state); |
| |
| /* Complete the commit, wake up any waiter. */ |
| spin_lock(&priv->commit.lock); |
| priv->commit.pending &= ~commit->crtcs; |
| spin_unlock(&priv->commit.lock); |
| |
| wake_up_all(&priv->commit.wait); |
| |
| kfree(commit); |
| } |
| |
| static void omap_atomic_work(struct work_struct *work) |
| { |
| struct omap_atomic_state_commit *commit = |
| container_of(work, struct omap_atomic_state_commit, work); |
| |
| omap_atomic_complete(commit); |
| } |
| |
| static bool omap_atomic_is_pending(struct omap_drm_private *priv, |
| struct omap_atomic_state_commit *commit) |
| { |
| bool pending; |
| |
| spin_lock(&priv->commit.lock); |
| pending = priv->commit.pending & commit->crtcs; |
| spin_unlock(&priv->commit.lock); |
| |
| return pending; |
| } |
| |
| static int omap_atomic_commit(struct drm_device *dev, |
| struct drm_atomic_state *state, bool nonblock) |
| { |
| struct omap_drm_private *priv = dev->dev_private; |
| struct omap_atomic_state_commit *commit; |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *crtc_state; |
| int i, ret; |
| |
| ret = drm_atomic_helper_prepare_planes(dev, state); |
| if (ret) |
| return ret; |
| |
| /* Allocate the commit object. */ |
| commit = kzalloc(sizeof(*commit), GFP_KERNEL); |
| if (commit == NULL) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| INIT_WORK(&commit->work, omap_atomic_work); |
| commit->dev = dev; |
| commit->state = state; |
| |
| /* Wait until all affected CRTCs have completed previous commits and |
| * mark them as pending. |
| */ |
| for_each_crtc_in_state(state, crtc, crtc_state, i) |
| commit->crtcs |= drm_crtc_mask(crtc); |
| |
| wait_event(priv->commit.wait, !omap_atomic_is_pending(priv, commit)); |
| |
| spin_lock(&priv->commit.lock); |
| priv->commit.pending |= commit->crtcs; |
| spin_unlock(&priv->commit.lock); |
| |
| /* Swap the state, this is the point of no return. */ |
| drm_atomic_helper_swap_state(state, true); |
| |
| if (nonblock) |
| schedule_work(&commit->work); |
| else |
| omap_atomic_complete(commit); |
| |
| return 0; |
| |
| error: |
| drm_atomic_helper_cleanup_planes(dev, state); |
| return ret; |
| } |
| |
| static const struct drm_mode_config_funcs omap_mode_config_funcs = { |
| .fb_create = omap_framebuffer_create, |
| .output_poll_changed = omap_fb_output_poll_changed, |
| .atomic_check = drm_atomic_helper_check, |
| .atomic_commit = omap_atomic_commit, |
| }; |
| |
| static int get_connector_type(struct omap_dss_device *dssdev) |
| { |
| switch (dssdev->type) { |
| case OMAP_DISPLAY_TYPE_HDMI: |
| return DRM_MODE_CONNECTOR_HDMIA; |
| case OMAP_DISPLAY_TYPE_DVI: |
| return DRM_MODE_CONNECTOR_DVID; |
| case OMAP_DISPLAY_TYPE_DSI: |
| return DRM_MODE_CONNECTOR_DSI; |
| default: |
| return DRM_MODE_CONNECTOR_Unknown; |
| } |
| } |
| |
| static bool channel_used(struct drm_device *dev, enum omap_channel channel) |
| { |
| struct omap_drm_private *priv = dev->dev_private; |
| int i; |
| |
| for (i = 0; i < priv->num_crtcs; i++) { |
| struct drm_crtc *crtc = priv->crtcs[i]; |
| |
| if (omap_crtc_channel(crtc) == channel) |
| return true; |
| } |
| |
| return false; |
| } |
| static void omap_disconnect_dssdevs(void) |
| { |
| struct omap_dss_device *dssdev = NULL; |
| |
| for_each_dss_dev(dssdev) |
| dssdev->driver->disconnect(dssdev); |
| } |
| |
| static int omap_connect_dssdevs(void) |
| { |
| int r; |
| struct omap_dss_device *dssdev = NULL; |
| bool no_displays = true; |
| |
| for_each_dss_dev(dssdev) { |
| r = dssdev->driver->connect(dssdev); |
| if (r == -EPROBE_DEFER) { |
| omap_dss_put_device(dssdev); |
| goto cleanup; |
| } else if (r) { |
| dev_warn(dssdev->dev, "could not connect display: %s\n", |
| dssdev->name); |
| } else { |
| no_displays = false; |
| } |
| } |
| |
| if (no_displays) |
| return -EPROBE_DEFER; |
| |
| return 0; |
| |
| cleanup: |
| /* |
| * if we are deferring probe, we disconnect the devices we previously |
| * connected |
| */ |
| omap_disconnect_dssdevs(); |
| |
| return r; |
| } |
| |
| static int omap_modeset_create_crtc(struct drm_device *dev, int id, |
| enum omap_channel channel) |
| { |
| struct omap_drm_private *priv = dev->dev_private; |
| struct drm_plane *plane; |
| struct drm_crtc *crtc; |
| |
| plane = omap_plane_init(dev, id, DRM_PLANE_TYPE_PRIMARY); |
| if (IS_ERR(plane)) |
| return PTR_ERR(plane); |
| |
| crtc = omap_crtc_init(dev, plane, channel, id); |
| |
| BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs)); |
| priv->crtcs[id] = crtc; |
| priv->num_crtcs++; |
| |
| priv->planes[id] = plane; |
| priv->num_planes++; |
| |
| return 0; |
| } |
| |
| static int omap_modeset_init_properties(struct drm_device *dev) |
| { |
| struct omap_drm_private *priv = dev->dev_private; |
| |
| if (priv->has_dmm) { |
| dev->mode_config.rotation_property = |
| drm_mode_create_rotation_property(dev, |
| DRM_ROTATE_0 | DRM_ROTATE_90 | |
| DRM_ROTATE_180 | DRM_ROTATE_270 | |
| DRM_REFLECT_X | DRM_REFLECT_Y); |
| if (!dev->mode_config.rotation_property) |
| return -ENOMEM; |
| } |
| |
| priv->zorder_prop = drm_property_create_range(dev, 0, "zorder", 0, 3); |
| if (!priv->zorder_prop) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| static int omap_modeset_init(struct drm_device *dev) |
| { |
| struct omap_drm_private *priv = dev->dev_private; |
| struct omap_dss_device *dssdev = NULL; |
| int num_ovls = dss_feat_get_num_ovls(); |
| int num_mgrs = dss_feat_get_num_mgrs(); |
| int num_crtcs; |
| int i, id = 0; |
| int ret; |
| |
| drm_mode_config_init(dev); |
| |
| omap_drm_irq_install(dev); |
| |
| ret = omap_modeset_init_properties(dev); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * We usually don't want to create a CRTC for each manager, at least |
| * not until we have a way to expose private planes to userspace. |
| * Otherwise there would not be enough video pipes left for drm planes. |
| * We use the num_crtc argument to limit the number of crtcs we create. |
| */ |
| num_crtcs = min3(num_crtc, num_mgrs, num_ovls); |
| |
| dssdev = NULL; |
| |
| for_each_dss_dev(dssdev) { |
| struct drm_connector *connector; |
| struct drm_encoder *encoder; |
| enum omap_channel channel; |
| struct omap_dss_device *out; |
| |
| if (!omapdss_device_is_connected(dssdev)) |
| continue; |
| |
| encoder = omap_encoder_init(dev, dssdev); |
| |
| if (!encoder) { |
| dev_err(dev->dev, "could not create encoder: %s\n", |
| dssdev->name); |
| return -ENOMEM; |
| } |
| |
| connector = omap_connector_init(dev, |
| get_connector_type(dssdev), dssdev, encoder); |
| |
| if (!connector) { |
| dev_err(dev->dev, "could not create connector: %s\n", |
| dssdev->name); |
| return -ENOMEM; |
| } |
| |
| BUG_ON(priv->num_encoders >= ARRAY_SIZE(priv->encoders)); |
| BUG_ON(priv->num_connectors >= ARRAY_SIZE(priv->connectors)); |
| |
| priv->encoders[priv->num_encoders++] = encoder; |
| priv->connectors[priv->num_connectors++] = connector; |
| |
| drm_mode_connector_attach_encoder(connector, encoder); |
| |
| /* |
| * if we have reached the limit of the crtcs we are allowed to |
| * create, let's not try to look for a crtc for this |
| * panel/encoder and onwards, we will, of course, populate the |
| * the possible_crtcs field for all the encoders with the final |
| * set of crtcs we create |
| */ |
| if (id == num_crtcs) |
| continue; |
| |
| /* |
| * get the recommended DISPC channel for this encoder. For now, |
| * we only try to get create a crtc out of the recommended, the |
| * other possible channels to which the encoder can connect are |
| * not considered. |
| */ |
| |
| out = omapdss_find_output_from_display(dssdev); |
| channel = out->dispc_channel; |
| omap_dss_put_device(out); |
| |
| /* |
| * if this channel hasn't already been taken by a previously |
| * allocated crtc, we create a new crtc for it |
| */ |
| if (!channel_used(dev, channel)) { |
| ret = omap_modeset_create_crtc(dev, id, channel); |
| if (ret < 0) { |
| dev_err(dev->dev, |
| "could not create CRTC (channel %u)\n", |
| channel); |
| return ret; |
| } |
| |
| id++; |
| } |
| } |
| |
| /* |
| * we have allocated crtcs according to the need of the panels/encoders, |
| * adding more crtcs here if needed |
| */ |
| for (; id < num_crtcs; id++) { |
| |
| /* find a free manager for this crtc */ |
| for (i = 0; i < num_mgrs; i++) { |
| if (!channel_used(dev, i)) |
| break; |
| } |
| |
| if (i == num_mgrs) { |
| /* this shouldn't really happen */ |
| dev_err(dev->dev, "no managers left for crtc\n"); |
| return -ENOMEM; |
| } |
| |
| ret = omap_modeset_create_crtc(dev, id, i); |
| if (ret < 0) { |
| dev_err(dev->dev, |
| "could not create CRTC (channel %u)\n", i); |
| return ret; |
| } |
| } |
| |
| /* |
| * Create normal planes for the remaining overlays: |
| */ |
| for (; id < num_ovls; id++) { |
| struct drm_plane *plane; |
| |
| plane = omap_plane_init(dev, id, DRM_PLANE_TYPE_OVERLAY); |
| if (IS_ERR(plane)) |
| return PTR_ERR(plane); |
| |
| BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes)); |
| priv->planes[priv->num_planes++] = plane; |
| } |
| |
| for (i = 0; i < priv->num_encoders; i++) { |
| struct drm_encoder *encoder = priv->encoders[i]; |
| struct omap_dss_device *dssdev = |
| omap_encoder_get_dssdev(encoder); |
| struct omap_dss_device *output; |
| |
| output = omapdss_find_output_from_display(dssdev); |
| |
| /* figure out which crtc's we can connect the encoder to: */ |
| encoder->possible_crtcs = 0; |
| for (id = 0; id < priv->num_crtcs; id++) { |
| struct drm_crtc *crtc = priv->crtcs[id]; |
| enum omap_channel crtc_channel; |
| |
| crtc_channel = omap_crtc_channel(crtc); |
| |
| if (output->dispc_channel == crtc_channel) { |
| encoder->possible_crtcs |= (1 << id); |
| break; |
| } |
| } |
| |
| omap_dss_put_device(output); |
| } |
| |
| DBG("registered %d planes, %d crtcs, %d encoders and %d connectors\n", |
| priv->num_planes, priv->num_crtcs, priv->num_encoders, |
| priv->num_connectors); |
| |
| dev->mode_config.min_width = 32; |
| dev->mode_config.min_height = 32; |
| |
| /* note: eventually will need some cpu_is_omapXYZ() type stuff here |
| * to fill in these limits properly on different OMAP generations.. |
| */ |
| dev->mode_config.max_width = 2048; |
| dev->mode_config.max_height = 2048; |
| |
| dev->mode_config.funcs = &omap_mode_config_funcs; |
| |
| drm_mode_config_reset(dev); |
| |
| return 0; |
| } |
| |
| static void omap_modeset_free(struct drm_device *dev) |
| { |
| drm_mode_config_cleanup(dev); |
| } |
| |
| /* |
| * drm ioctl funcs |
| */ |
| |
| |
| static int ioctl_get_param(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct omap_drm_private *priv = dev->dev_private; |
| struct drm_omap_param *args = data; |
| |
| DBG("%p: param=%llu", dev, args->param); |
| |
| switch (args->param) { |
| case OMAP_PARAM_CHIPSET_ID: |
| args->value = priv->omaprev; |
| break; |
| default: |
| DBG("unknown parameter %lld", args->param); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int ioctl_set_param(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_omap_param *args = data; |
| |
| switch (args->param) { |
| default: |
| DBG("unknown parameter %lld", args->param); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| #define OMAP_BO_USER_MASK 0x00ffffff /* flags settable by userspace */ |
| |
| static int ioctl_gem_new(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_omap_gem_new *args = data; |
| u32 flags = args->flags & OMAP_BO_USER_MASK; |
| |
| VERB("%p:%p: size=0x%08x, flags=%08x", dev, file_priv, |
| args->size.bytes, flags); |
| |
| return omap_gem_new_handle(dev, file_priv, args->size, flags, |
| &args->handle); |
| } |
| |
| static int ioctl_gem_cpu_prep(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_omap_gem_cpu_prep *args = data; |
| struct drm_gem_object *obj; |
| int ret; |
| |
| VERB("%p:%p: handle=%d, op=%x", dev, file_priv, args->handle, args->op); |
| |
| obj = drm_gem_object_lookup(file_priv, args->handle); |
| if (!obj) |
| return -ENOENT; |
| |
| ret = omap_gem_op_sync(obj, args->op); |
| |
| if (!ret) |
| ret = omap_gem_op_start(obj, args->op); |
| |
| drm_gem_object_unreference_unlocked(obj); |
| |
| return ret; |
| } |
| |
| static int ioctl_gem_cpu_fini(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_omap_gem_cpu_fini *args = data; |
| struct drm_gem_object *obj; |
| int ret; |
| |
| VERB("%p:%p: handle=%d", dev, file_priv, args->handle); |
| |
| obj = drm_gem_object_lookup(file_priv, args->handle); |
| if (!obj) |
| return -ENOENT; |
| |
| /* XXX flushy, flushy */ |
| ret = 0; |
| |
| if (!ret) |
| ret = omap_gem_op_finish(obj, args->op); |
| |
| drm_gem_object_unreference_unlocked(obj); |
| |
| return ret; |
| } |
| |
| static int ioctl_gem_info(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_omap_gem_info *args = data; |
| struct drm_gem_object *obj; |
| int ret = 0; |
| |
| VERB("%p:%p: handle=%d", dev, file_priv, args->handle); |
| |
| obj = drm_gem_object_lookup(file_priv, args->handle); |
| if (!obj) |
| return -ENOENT; |
| |
| args->size = omap_gem_mmap_size(obj); |
| args->offset = omap_gem_mmap_offset(obj); |
| |
| drm_gem_object_unreference_unlocked(obj); |
| |
| return ret; |
| } |
| |
| static const struct drm_ioctl_desc ioctls[DRM_COMMAND_END - DRM_COMMAND_BASE] = { |
| DRM_IOCTL_DEF_DRV(OMAP_GET_PARAM, ioctl_get_param, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(OMAP_SET_PARAM, ioctl_set_param, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(OMAP_GEM_NEW, ioctl_gem_new, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_PREP, ioctl_gem_cpu_prep, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_FINI, ioctl_gem_cpu_fini, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(OMAP_GEM_INFO, ioctl_gem_info, DRM_AUTH), |
| }; |
| |
| /* |
| * drm driver funcs |
| */ |
| |
| /** |
| * load - setup chip and create an initial config |
| * @dev: DRM device |
| * @flags: startup flags |
| * |
| * The driver load routine has to do several things: |
| * - initialize the memory manager |
| * - allocate initial config memory |
| * - setup the DRM framebuffer with the allocated memory |
| */ |
| static int dev_load(struct drm_device *dev, unsigned long flags) |
| { |
| struct omap_drm_platform_data *pdata = dev->dev->platform_data; |
| struct omap_drm_private *priv; |
| unsigned int i; |
| int ret; |
| |
| DBG("load: dev=%p", dev); |
| |
| priv = kzalloc(sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->omaprev = pdata->omaprev; |
| |
| dev->dev_private = priv; |
| |
| priv->wq = alloc_ordered_workqueue("omapdrm", 0); |
| init_waitqueue_head(&priv->commit.wait); |
| spin_lock_init(&priv->commit.lock); |
| |
| spin_lock_init(&priv->list_lock); |
| INIT_LIST_HEAD(&priv->obj_list); |
| |
| omap_gem_init(dev); |
| |
| ret = omap_modeset_init(dev); |
| if (ret) { |
| dev_err(dev->dev, "omap_modeset_init failed: ret=%d\n", ret); |
| dev->dev_private = NULL; |
| kfree(priv); |
| return ret; |
| } |
| |
| /* Initialize vblank handling, start with all CRTCs disabled. */ |
| ret = drm_vblank_init(dev, priv->num_crtcs); |
| if (ret) |
| dev_warn(dev->dev, "could not init vblank\n"); |
| |
| for (i = 0; i < priv->num_crtcs; i++) |
| drm_crtc_vblank_off(priv->crtcs[i]); |
| |
| priv->fbdev = omap_fbdev_init(dev); |
| |
| /* store off drm_device for use in pm ops */ |
| dev_set_drvdata(dev->dev, dev); |
| |
| drm_kms_helper_poll_init(dev); |
| |
| return 0; |
| } |
| |
| static int dev_unload(struct drm_device *dev) |
| { |
| struct omap_drm_private *priv = dev->dev_private; |
| |
| DBG("unload: dev=%p", dev); |
| |
| drm_kms_helper_poll_fini(dev); |
| |
| if (priv->fbdev) |
| omap_fbdev_free(dev); |
| |
| omap_modeset_free(dev); |
| omap_gem_deinit(dev); |
| |
| destroy_workqueue(priv->wq); |
| |
| drm_vblank_cleanup(dev); |
| omap_drm_irq_uninstall(dev); |
| |
| kfree(dev->dev_private); |
| dev->dev_private = NULL; |
| |
| dev_set_drvdata(dev->dev, NULL); |
| |
| return 0; |
| } |
| |
| static int dev_open(struct drm_device *dev, struct drm_file *file) |
| { |
| file->driver_priv = NULL; |
| |
| DBG("open: dev=%p, file=%p", dev, file); |
| |
| return 0; |
| } |
| |
| /** |
| * lastclose - clean up after all DRM clients have exited |
| * @dev: DRM device |
| * |
| * Take care of cleaning up after all DRM clients have exited. In the |
| * mode setting case, we want to restore the kernel's initial mode (just |
| * in case the last client left us in a bad state). |
| */ |
| static void dev_lastclose(struct drm_device *dev) |
| { |
| int i; |
| |
| /* we don't support vga_switcheroo.. so just make sure the fbdev |
| * mode is active |
| */ |
| struct omap_drm_private *priv = dev->dev_private; |
| int ret; |
| |
| DBG("lastclose: dev=%p", dev); |
| |
| if (dev->mode_config.rotation_property) { |
| /* need to restore default rotation state.. not sure |
| * if there is a cleaner way to restore properties to |
| * default state? Maybe a flag that properties should |
| * automatically be restored to default state on |
| * lastclose? |
| */ |
| for (i = 0; i < priv->num_crtcs; i++) { |
| drm_object_property_set_value(&priv->crtcs[i]->base, |
| dev->mode_config.rotation_property, 0); |
| } |
| |
| for (i = 0; i < priv->num_planes; i++) { |
| drm_object_property_set_value(&priv->planes[i]->base, |
| dev->mode_config.rotation_property, 0); |
| } |
| } |
| |
| if (priv->fbdev) { |
| ret = drm_fb_helper_restore_fbdev_mode_unlocked(priv->fbdev); |
| if (ret) |
| DBG("failed to restore crtc mode"); |
| } |
| } |
| |
| static const struct vm_operations_struct omap_gem_vm_ops = { |
| .fault = omap_gem_fault, |
| .open = drm_gem_vm_open, |
| .close = drm_gem_vm_close, |
| }; |
| |
| static const struct file_operations omapdriver_fops = { |
| .owner = THIS_MODULE, |
| .open = drm_open, |
| .unlocked_ioctl = drm_ioctl, |
| .release = drm_release, |
| .mmap = omap_gem_mmap, |
| .poll = drm_poll, |
| .read = drm_read, |
| .llseek = noop_llseek, |
| }; |
| |
| static struct drm_driver omap_drm_driver = { |
| .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME | |
| DRIVER_ATOMIC, |
| .load = dev_load, |
| .unload = dev_unload, |
| .open = dev_open, |
| .lastclose = dev_lastclose, |
| .get_vblank_counter = drm_vblank_no_hw_counter, |
| .enable_vblank = omap_irq_enable_vblank, |
| .disable_vblank = omap_irq_disable_vblank, |
| #ifdef CONFIG_DEBUG_FS |
| .debugfs_init = omap_debugfs_init, |
| .debugfs_cleanup = omap_debugfs_cleanup, |
| #endif |
| .prime_handle_to_fd = drm_gem_prime_handle_to_fd, |
| .prime_fd_to_handle = drm_gem_prime_fd_to_handle, |
| .gem_prime_export = omap_gem_prime_export, |
| .gem_prime_import = omap_gem_prime_import, |
| .gem_free_object = omap_gem_free_object, |
| .gem_vm_ops = &omap_gem_vm_ops, |
| .dumb_create = omap_gem_dumb_create, |
| .dumb_map_offset = omap_gem_dumb_map_offset, |
| .dumb_destroy = drm_gem_dumb_destroy, |
| .ioctls = ioctls, |
| .num_ioctls = DRM_OMAP_NUM_IOCTLS, |
| .fops = &omapdriver_fops, |
| .name = DRIVER_NAME, |
| .desc = DRIVER_DESC, |
| .date = DRIVER_DATE, |
| .major = DRIVER_MAJOR, |
| .minor = DRIVER_MINOR, |
| .patchlevel = DRIVER_PATCHLEVEL, |
| }; |
| |
| static int pdev_probe(struct platform_device *device) |
| { |
| int r; |
| |
| if (omapdss_is_initialized() == false) |
| return -EPROBE_DEFER; |
| |
| omap_crtc_pre_init(); |
| |
| r = omap_connect_dssdevs(); |
| if (r) { |
| omap_crtc_pre_uninit(); |
| return r; |
| } |
| |
| DBG("%s", device->name); |
| return drm_platform_init(&omap_drm_driver, device); |
| } |
| |
| static int pdev_remove(struct platform_device *device) |
| { |
| DBG(""); |
| |
| drm_put_dev(platform_get_drvdata(device)); |
| |
| omap_disconnect_dssdevs(); |
| omap_crtc_pre_uninit(); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int omap_drm_suspend_all_displays(void) |
| { |
| struct omap_dss_device *dssdev = NULL; |
| |
| for_each_dss_dev(dssdev) { |
| if (!dssdev->driver) |
| continue; |
| |
| if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) { |
| dssdev->driver->disable(dssdev); |
| dssdev->activate_after_resume = true; |
| } else { |
| dssdev->activate_after_resume = false; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int omap_drm_resume_all_displays(void) |
| { |
| struct omap_dss_device *dssdev = NULL; |
| |
| for_each_dss_dev(dssdev) { |
| if (!dssdev->driver) |
| continue; |
| |
| if (dssdev->activate_after_resume) { |
| dssdev->driver->enable(dssdev); |
| dssdev->activate_after_resume = false; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int omap_drm_suspend(struct device *dev) |
| { |
| struct drm_device *drm_dev = dev_get_drvdata(dev); |
| |
| drm_kms_helper_poll_disable(drm_dev); |
| |
| drm_modeset_lock_all(drm_dev); |
| omap_drm_suspend_all_displays(); |
| drm_modeset_unlock_all(drm_dev); |
| |
| return 0; |
| } |
| |
| static int omap_drm_resume(struct device *dev) |
| { |
| struct drm_device *drm_dev = dev_get_drvdata(dev); |
| |
| drm_modeset_lock_all(drm_dev); |
| omap_drm_resume_all_displays(); |
| drm_modeset_unlock_all(drm_dev); |
| |
| drm_kms_helper_poll_enable(drm_dev); |
| |
| return omap_gem_resume(dev); |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(omapdrm_pm_ops, omap_drm_suspend, omap_drm_resume); |
| |
| static struct platform_driver pdev = { |
| .driver = { |
| .name = DRIVER_NAME, |
| .pm = &omapdrm_pm_ops, |
| }, |
| .probe = pdev_probe, |
| .remove = pdev_remove, |
| }; |
| |
| static struct platform_driver * const drivers[] = { |
| &omap_dmm_driver, |
| &pdev, |
| }; |
| |
| static int __init omap_drm_init(void) |
| { |
| DBG("init"); |
| |
| return platform_register_drivers(drivers, ARRAY_SIZE(drivers)); |
| } |
| |
| static void __exit omap_drm_fini(void) |
| { |
| DBG("fini"); |
| |
| platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); |
| } |
| |
| /* need late_initcall() so we load after dss_driver's are loaded */ |
| late_initcall(omap_drm_init); |
| module_exit(omap_drm_fini); |
| |
| MODULE_AUTHOR("Rob Clark <rob@ti.com>"); |
| MODULE_DESCRIPTION("OMAP DRM Display Driver"); |
| MODULE_ALIAS("platform:" DRIVER_NAME); |
| MODULE_LICENSE("GPL v2"); |