| /* |
| * Special handling for DW core on Intel MID platform |
| * |
| * Copyright (c) 2009, 2014 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| */ |
| |
| #include <linux/dma-mapping.h> |
| #include <linux/dmaengine.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/spi/spi.h> |
| #include <linux/types.h> |
| |
| #include "spi-dw.h" |
| |
| #ifdef CONFIG_SPI_DW_MID_DMA |
| #include <linux/intel_mid_dma.h> |
| #include <linux/pci.h> |
| |
| #define RX_BUSY 0 |
| #define TX_BUSY 1 |
| |
| struct mid_dma { |
| struct intel_mid_dma_slave dmas_tx; |
| struct intel_mid_dma_slave dmas_rx; |
| }; |
| |
| static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param) |
| { |
| struct dw_spi *dws = param; |
| |
| return dws->dma_dev == chan->device->dev; |
| } |
| |
| static int mid_spi_dma_init(struct dw_spi *dws) |
| { |
| struct mid_dma *dw_dma = dws->dma_priv; |
| struct pci_dev *dma_dev; |
| struct intel_mid_dma_slave *rxs, *txs; |
| dma_cap_mask_t mask; |
| |
| /* |
| * Get pci device for DMA controller, currently it could only |
| * be the DMA controller of Medfield |
| */ |
| dma_dev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0827, NULL); |
| if (!dma_dev) |
| return -ENODEV; |
| |
| dws->dma_dev = &dma_dev->dev; |
| |
| dma_cap_zero(mask); |
| dma_cap_set(DMA_SLAVE, mask); |
| |
| /* 1. Init rx channel */ |
| dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws); |
| if (!dws->rxchan) |
| goto err_exit; |
| rxs = &dw_dma->dmas_rx; |
| rxs->hs_mode = LNW_DMA_HW_HS; |
| rxs->cfg_mode = LNW_DMA_PER_TO_MEM; |
| dws->rxchan->private = rxs; |
| |
| /* 2. Init tx channel */ |
| dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws); |
| if (!dws->txchan) |
| goto free_rxchan; |
| txs = &dw_dma->dmas_tx; |
| txs->hs_mode = LNW_DMA_HW_HS; |
| txs->cfg_mode = LNW_DMA_MEM_TO_PER; |
| dws->txchan->private = txs; |
| |
| dws->dma_inited = 1; |
| return 0; |
| |
| free_rxchan: |
| dma_release_channel(dws->rxchan); |
| err_exit: |
| return -EBUSY; |
| } |
| |
| static void mid_spi_dma_exit(struct dw_spi *dws) |
| { |
| if (!dws->dma_inited) |
| return; |
| |
| dmaengine_terminate_all(dws->txchan); |
| dma_release_channel(dws->txchan); |
| |
| dmaengine_terminate_all(dws->rxchan); |
| dma_release_channel(dws->rxchan); |
| } |
| |
| /* |
| * dws->dma_chan_busy is set before the dma transfer starts, callback for tx |
| * channel will clear a corresponding bit. |
| */ |
| static void dw_spi_dma_tx_done(void *arg) |
| { |
| struct dw_spi *dws = arg; |
| |
| if (test_and_clear_bit(TX_BUSY, &dws->dma_chan_busy) & BIT(RX_BUSY)) |
| return; |
| dw_spi_xfer_done(dws); |
| } |
| |
| static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws) |
| { |
| struct dma_slave_config txconf; |
| struct dma_async_tx_descriptor *txdesc; |
| |
| if (!dws->tx_dma) |
| return NULL; |
| |
| txconf.direction = DMA_MEM_TO_DEV; |
| txconf.dst_addr = dws->dma_addr; |
| txconf.dst_maxburst = LNW_DMA_MSIZE_16; |
| txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; |
| txconf.dst_addr_width = dws->dma_width; |
| txconf.device_fc = false; |
| |
| dmaengine_slave_config(dws->txchan, &txconf); |
| |
| memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl)); |
| dws->tx_sgl.dma_address = dws->tx_dma; |
| dws->tx_sgl.length = dws->len; |
| |
| txdesc = dmaengine_prep_slave_sg(dws->txchan, |
| &dws->tx_sgl, |
| 1, |
| DMA_MEM_TO_DEV, |
| DMA_PREP_INTERRUPT | DMA_CTRL_ACK); |
| txdesc->callback = dw_spi_dma_tx_done; |
| txdesc->callback_param = dws; |
| |
| return txdesc; |
| } |
| |
| /* |
| * dws->dma_chan_busy is set before the dma transfer starts, callback for rx |
| * channel will clear a corresponding bit. |
| */ |
| static void dw_spi_dma_rx_done(void *arg) |
| { |
| struct dw_spi *dws = arg; |
| |
| if (test_and_clear_bit(RX_BUSY, &dws->dma_chan_busy) & BIT(TX_BUSY)) |
| return; |
| dw_spi_xfer_done(dws); |
| } |
| |
| static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws) |
| { |
| struct dma_slave_config rxconf; |
| struct dma_async_tx_descriptor *rxdesc; |
| |
| if (!dws->rx_dma) |
| return NULL; |
| |
| rxconf.direction = DMA_DEV_TO_MEM; |
| rxconf.src_addr = dws->dma_addr; |
| rxconf.src_maxburst = LNW_DMA_MSIZE_16; |
| rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; |
| rxconf.src_addr_width = dws->dma_width; |
| rxconf.device_fc = false; |
| |
| dmaengine_slave_config(dws->rxchan, &rxconf); |
| |
| memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl)); |
| dws->rx_sgl.dma_address = dws->rx_dma; |
| dws->rx_sgl.length = dws->len; |
| |
| rxdesc = dmaengine_prep_slave_sg(dws->rxchan, |
| &dws->rx_sgl, |
| 1, |
| DMA_DEV_TO_MEM, |
| DMA_PREP_INTERRUPT | DMA_CTRL_ACK); |
| rxdesc->callback = dw_spi_dma_rx_done; |
| rxdesc->callback_param = dws; |
| |
| return rxdesc; |
| } |
| |
| static void dw_spi_dma_setup(struct dw_spi *dws) |
| { |
| u16 dma_ctrl = 0; |
| |
| spi_enable_chip(dws, 0); |
| |
| dw_writew(dws, DW_SPI_DMARDLR, 0xf); |
| dw_writew(dws, DW_SPI_DMATDLR, 0x10); |
| |
| if (dws->tx_dma) |
| dma_ctrl |= SPI_DMA_TDMAE; |
| if (dws->rx_dma) |
| dma_ctrl |= SPI_DMA_RDMAE; |
| dw_writew(dws, DW_SPI_DMACR, dma_ctrl); |
| |
| spi_enable_chip(dws, 1); |
| } |
| |
| static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) |
| { |
| struct dma_async_tx_descriptor *txdesc, *rxdesc; |
| |
| /* 1. setup DMA related registers */ |
| if (cs_change) |
| dw_spi_dma_setup(dws); |
| |
| /* 2. Prepare the TX dma transfer */ |
| txdesc = dw_spi_dma_prepare_tx(dws); |
| |
| /* 3. Prepare the RX dma transfer */ |
| rxdesc = dw_spi_dma_prepare_rx(dws); |
| |
| /* rx must be started before tx due to spi instinct */ |
| if (rxdesc) { |
| set_bit(RX_BUSY, &dws->dma_chan_busy); |
| dmaengine_submit(rxdesc); |
| dma_async_issue_pending(dws->rxchan); |
| } |
| |
| if (txdesc) { |
| set_bit(TX_BUSY, &dws->dma_chan_busy); |
| dmaengine_submit(txdesc); |
| dma_async_issue_pending(dws->txchan); |
| } |
| |
| return 0; |
| } |
| |
| static struct dw_spi_dma_ops mid_dma_ops = { |
| .dma_init = mid_spi_dma_init, |
| .dma_exit = mid_spi_dma_exit, |
| .dma_transfer = mid_spi_dma_transfer, |
| }; |
| #endif |
| |
| /* Some specific info for SPI0 controller on Intel MID */ |
| |
| /* HW info for MRST Clk Control Unit, 32b reg per controller */ |
| #define MRST_SPI_CLK_BASE 100000000 /* 100m */ |
| #define MRST_CLK_SPI_REG 0xff11d86c |
| #define CLK_SPI_BDIV_OFFSET 0 |
| #define CLK_SPI_BDIV_MASK 0x00000007 |
| #define CLK_SPI_CDIV_OFFSET 9 |
| #define CLK_SPI_CDIV_MASK 0x00000e00 |
| #define CLK_SPI_DISABLE_OFFSET 8 |
| |
| int dw_spi_mid_init(struct dw_spi *dws) |
| { |
| void __iomem *clk_reg; |
| u32 clk_cdiv; |
| |
| clk_reg = ioremap_nocache(MRST_CLK_SPI_REG, 16); |
| if (!clk_reg) |
| return -ENOMEM; |
| |
| /* Get SPI controller operating freq info */ |
| clk_cdiv = readl(clk_reg + dws->bus_num * sizeof(u32)); |
| clk_cdiv &= CLK_SPI_CDIV_MASK; |
| clk_cdiv >>= CLK_SPI_CDIV_OFFSET; |
| dws->max_freq = MRST_SPI_CLK_BASE / (clk_cdiv + 1); |
| |
| iounmap(clk_reg); |
| |
| #ifdef CONFIG_SPI_DW_MID_DMA |
| dws->dma_priv = kzalloc(sizeof(struct mid_dma), GFP_KERNEL); |
| if (!dws->dma_priv) |
| return -ENOMEM; |
| dws->dma_ops = &mid_dma_ops; |
| #endif |
| return 0; |
| } |