| /* |
| * mach-nomadik/include/mach/irqs.h |
| * |
| * Copyright (C) ST Microelectronics |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #ifndef __ASM_ARCH_IRQS_H |
| #define __ASM_ARCH_IRQS_H |
| |
| #define IRQ_VIC_START 32 /* first VIC interrupt is 1 */ |
| |
| /* |
| * Interrupt numbers generic for all Nomadik Chip cuts |
| */ |
| #define IRQ_WATCHDOG (IRQ_VIC_START+0) |
| #define IRQ_SOFTINT (IRQ_VIC_START+1) |
| #define IRQ_CRYPTO (IRQ_VIC_START+2) |
| #define IRQ_OWM (IRQ_VIC_START+3) |
| #define IRQ_MTU0 (IRQ_VIC_START+4) |
| #define IRQ_MTU1 (IRQ_VIC_START+5) |
| #define IRQ_GPIO0 (IRQ_VIC_START+6) |
| #define IRQ_GPIO1 (IRQ_VIC_START+7) |
| #define IRQ_GPIO2 (IRQ_VIC_START+8) |
| #define IRQ_GPIO3 (IRQ_VIC_START+9) |
| #define IRQ_RTC_RTT (IRQ_VIC_START+10) |
| #define IRQ_SSP (IRQ_VIC_START+11) |
| #define IRQ_UART0 (IRQ_VIC_START+12) |
| #define IRQ_DMA1 (IRQ_VIC_START+13) |
| #define IRQ_CLCD_MDIF (IRQ_VIC_START+14) |
| #define IRQ_DMA0 (IRQ_VIC_START+15) |
| #define IRQ_PWRFAIL (IRQ_VIC_START+16) |
| #define IRQ_UART1 (IRQ_VIC_START+17) |
| #define IRQ_FIRDA (IRQ_VIC_START+18) |
| #define IRQ_MSP0 (IRQ_VIC_START+19) |
| #define IRQ_I2C0 (IRQ_VIC_START+20) |
| #define IRQ_I2C1 (IRQ_VIC_START+21) |
| #define IRQ_SDMMC (IRQ_VIC_START+22) |
| #define IRQ_USBOTG (IRQ_VIC_START+23) |
| #define IRQ_SVA_IT0 (IRQ_VIC_START+24) |
| #define IRQ_SVA_IT1 (IRQ_VIC_START+25) |
| #define IRQ_SAA_IT0 (IRQ_VIC_START+26) |
| #define IRQ_SAA_IT1 (IRQ_VIC_START+27) |
| #define IRQ_UART2 (IRQ_VIC_START+28) |
| #define IRQ_MSP2 (IRQ_VIC_START+29) |
| #define IRQ_L2CC (IRQ_VIC_START+30) |
| #define IRQ_HPI (IRQ_VIC_START+31) |
| #define IRQ_SKE (IRQ_VIC_START+32) |
| #define IRQ_KP (IRQ_VIC_START+33) |
| #define IRQ_MEMST (IRQ_VIC_START+34) |
| #define IRQ_SGA_IT (IRQ_VIC_START+35) |
| #define IRQ_USBM (IRQ_VIC_START+36) |
| #define IRQ_MSP1 (IRQ_VIC_START+37) |
| |
| #define NOMADIK_GPIO_OFFSET (IRQ_VIC_START+64) |
| |
| /* After chip-specific IRQ numbers we have the GPIO ones */ |
| #define NOMADIK_NR_GPIO 128 /* last 4 not wired to pins */ |
| #define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_GPIO_OFFSET) |
| #define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_GPIO_OFFSET) |
| #define NOMADIK_NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) |
| |
| /* Following two are used by entry_macro.S, to access our dual-vic */ |
| #define VIC_REG_IRQSR0 0 |
| #define VIC_REG_IRQSR1 0x20 |
| |
| #endif /* __ASM_ARCH_IRQS_H */ |