| /* |
| * Copyright (C) 2016 Atmel |
| * Bo Shen <voice.shen@atmel.com> |
| * |
| * Authors: Bo Shen <voice.shen@atmel.com> |
| * Boris Brezillon <boris.brezillon@free-electrons.com> |
| * Wu, Songjun <Songjun.Wu@atmel.com> |
| * |
| * |
| * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_edid.h> |
| |
| #define SII902X_TPI_VIDEO_DATA 0x0 |
| |
| #define SII902X_TPI_PIXEL_REPETITION 0x8 |
| #define SII902X_TPI_AVI_PIXEL_REP_BUS_24BIT BIT(5) |
| #define SII902X_TPI_AVI_PIXEL_REP_RISING_EDGE BIT(4) |
| #define SII902X_TPI_AVI_PIXEL_REP_4X 3 |
| #define SII902X_TPI_AVI_PIXEL_REP_2X 1 |
| #define SII902X_TPI_AVI_PIXEL_REP_NONE 0 |
| #define SII902X_TPI_CLK_RATIO_HALF (0 << 6) |
| #define SII902X_TPI_CLK_RATIO_1X (1 << 6) |
| #define SII902X_TPI_CLK_RATIO_2X (2 << 6) |
| #define SII902X_TPI_CLK_RATIO_4X (3 << 6) |
| |
| #define SII902X_TPI_AVI_IN_FORMAT 0x9 |
| #define SII902X_TPI_AVI_INPUT_BITMODE_12BIT BIT(7) |
| #define SII902X_TPI_AVI_INPUT_DITHER BIT(6) |
| #define SII902X_TPI_AVI_INPUT_RANGE_LIMITED (2 << 2) |
| #define SII902X_TPI_AVI_INPUT_RANGE_FULL (1 << 2) |
| #define SII902X_TPI_AVI_INPUT_RANGE_AUTO (0 << 2) |
| #define SII902X_TPI_AVI_INPUT_COLORSPACE_BLACK (3 << 0) |
| #define SII902X_TPI_AVI_INPUT_COLORSPACE_YUV422 (2 << 0) |
| #define SII902X_TPI_AVI_INPUT_COLORSPACE_YUV444 (1 << 0) |
| #define SII902X_TPI_AVI_INPUT_COLORSPACE_RGB (0 << 0) |
| |
| #define SII902X_TPI_AVI_INFOFRAME 0x0c |
| |
| #define SII902X_SYS_CTRL_DATA 0x1a |
| #define SII902X_SYS_CTRL_PWR_DWN BIT(4) |
| #define SII902X_SYS_CTRL_AV_MUTE BIT(3) |
| #define SII902X_SYS_CTRL_DDC_BUS_REQ BIT(2) |
| #define SII902X_SYS_CTRL_DDC_BUS_GRTD BIT(1) |
| #define SII902X_SYS_CTRL_OUTPUT_MODE BIT(0) |
| #define SII902X_SYS_CTRL_OUTPUT_HDMI 1 |
| #define SII902X_SYS_CTRL_OUTPUT_DVI 0 |
| |
| #define SII902X_REG_CHIPID(n) (0x1b + (n)) |
| |
| #define SII902X_PWR_STATE_CTRL 0x1e |
| #define SII902X_AVI_POWER_STATE_MSK GENMASK(1, 0) |
| #define SII902X_AVI_POWER_STATE_D(l) ((l) & SII902X_AVI_POWER_STATE_MSK) |
| |
| #define SII902X_INT_ENABLE 0x3c |
| #define SII902X_INT_STATUS 0x3d |
| #define SII902X_HOTPLUG_EVENT BIT(0) |
| #define SII902X_PLUGGED_STATUS BIT(2) |
| |
| #define SII902X_REG_TPI_RQB 0xc7 |
| |
| #define SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS 500 |
| |
| struct sii902x { |
| struct i2c_client *i2c; |
| struct regmap *regmap; |
| struct drm_bridge bridge; |
| struct drm_connector connector; |
| struct gpio_desc *reset_gpio; |
| }; |
| |
| static inline struct sii902x *bridge_to_sii902x(struct drm_bridge *bridge) |
| { |
| return container_of(bridge, struct sii902x, bridge); |
| } |
| |
| static inline struct sii902x *connector_to_sii902x(struct drm_connector *con) |
| { |
| return container_of(con, struct sii902x, connector); |
| } |
| |
| static void sii902x_reset(struct sii902x *sii902x) |
| { |
| if (!sii902x->reset_gpio) |
| return; |
| |
| gpiod_set_value(sii902x->reset_gpio, 1); |
| |
| /* The datasheet says treset-min = 100us. Make it 150us to be sure. */ |
| usleep_range(150, 200); |
| |
| gpiod_set_value(sii902x->reset_gpio, 0); |
| } |
| |
| static enum drm_connector_status |
| sii902x_connector_detect(struct drm_connector *connector, bool force) |
| { |
| struct sii902x *sii902x = connector_to_sii902x(connector); |
| unsigned int status; |
| |
| regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status); |
| |
| return (status & SII902X_PLUGGED_STATUS) ? |
| connector_status_connected : connector_status_disconnected; |
| } |
| |
| static const struct drm_connector_funcs sii902x_connector_funcs = { |
| .detect = sii902x_connector_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = drm_connector_cleanup, |
| .reset = drm_atomic_helper_connector_reset, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| static int sii902x_get_modes(struct drm_connector *connector) |
| { |
| struct sii902x *sii902x = connector_to_sii902x(connector); |
| struct regmap *regmap = sii902x->regmap; |
| u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24; |
| struct device *dev = &sii902x->i2c->dev; |
| unsigned long timeout; |
| unsigned int retries; |
| unsigned int status; |
| struct edid *edid; |
| int num = 0; |
| int ret; |
| |
| ret = regmap_update_bits(regmap, SII902X_SYS_CTRL_DATA, |
| SII902X_SYS_CTRL_DDC_BUS_REQ, |
| SII902X_SYS_CTRL_DDC_BUS_REQ); |
| if (ret) |
| return ret; |
| |
| timeout = jiffies + |
| msecs_to_jiffies(SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS); |
| do { |
| ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status); |
| if (ret) |
| return ret; |
| } while (!(status & SII902X_SYS_CTRL_DDC_BUS_GRTD) && |
| time_before(jiffies, timeout)); |
| |
| if (!(status & SII902X_SYS_CTRL_DDC_BUS_GRTD)) { |
| dev_err(dev, "failed to acquire the i2c bus\n"); |
| return -ETIMEDOUT; |
| } |
| |
| ret = regmap_write(regmap, SII902X_SYS_CTRL_DATA, status); |
| if (ret) |
| return ret; |
| |
| edid = drm_get_edid(connector, sii902x->i2c->adapter); |
| drm_mode_connector_update_edid_property(connector, edid); |
| if (edid) { |
| num = drm_add_edid_modes(connector, edid); |
| kfree(edid); |
| } |
| |
| ret = drm_display_info_set_bus_formats(&connector->display_info, |
| &bus_format, 1); |
| if (ret) |
| return ret; |
| |
| /* |
| * Sometimes the I2C bus can stall after failure to use the |
| * EDID channel. Retry a few times to see if things clear |
| * up, else continue anyway. |
| */ |
| retries = 5; |
| do { |
| ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, |
| &status); |
| retries--; |
| } while (ret && retries); |
| if (ret) |
| dev_err(dev, "failed to read status (%d)\n", ret); |
| |
| ret = regmap_update_bits(regmap, SII902X_SYS_CTRL_DATA, |
| SII902X_SYS_CTRL_DDC_BUS_REQ | |
| SII902X_SYS_CTRL_DDC_BUS_GRTD, 0); |
| if (ret) |
| return ret; |
| |
| timeout = jiffies + |
| msecs_to_jiffies(SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS); |
| do { |
| ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status); |
| if (ret) |
| return ret; |
| } while (status & (SII902X_SYS_CTRL_DDC_BUS_REQ | |
| SII902X_SYS_CTRL_DDC_BUS_GRTD) && |
| time_before(jiffies, timeout)); |
| |
| if (status & (SII902X_SYS_CTRL_DDC_BUS_REQ | |
| SII902X_SYS_CTRL_DDC_BUS_GRTD)) { |
| dev_err(dev, "failed to release the i2c bus\n"); |
| return -ETIMEDOUT; |
| } |
| |
| return num; |
| } |
| |
| static enum drm_mode_status sii902x_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| /* TODO: check mode */ |
| |
| return MODE_OK; |
| } |
| |
| static const struct drm_connector_helper_funcs sii902x_connector_helper_funcs = { |
| .get_modes = sii902x_get_modes, |
| .mode_valid = sii902x_mode_valid, |
| }; |
| |
| static void sii902x_bridge_disable(struct drm_bridge *bridge) |
| { |
| struct sii902x *sii902x = bridge_to_sii902x(bridge); |
| |
| regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA, |
| SII902X_SYS_CTRL_PWR_DWN, |
| SII902X_SYS_CTRL_PWR_DWN); |
| } |
| |
| static void sii902x_bridge_enable(struct drm_bridge *bridge) |
| { |
| struct sii902x *sii902x = bridge_to_sii902x(bridge); |
| |
| regmap_update_bits(sii902x->regmap, SII902X_PWR_STATE_CTRL, |
| SII902X_AVI_POWER_STATE_MSK, |
| SII902X_AVI_POWER_STATE_D(0)); |
| regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA, |
| SII902X_SYS_CTRL_PWR_DWN, 0); |
| } |
| |
| static void sii902x_bridge_mode_set(struct drm_bridge *bridge, |
| struct drm_display_mode *mode, |
| struct drm_display_mode *adj) |
| { |
| struct sii902x *sii902x = bridge_to_sii902x(bridge); |
| struct regmap *regmap = sii902x->regmap; |
| u8 buf[HDMI_INFOFRAME_SIZE(AVI)]; |
| struct hdmi_avi_infoframe frame; |
| u16 pixel_clock_10kHz = adj->clock / 10; |
| int ret; |
| |
| buf[0] = pixel_clock_10kHz & 0xff; |
| buf[1] = pixel_clock_10kHz >> 8; |
| buf[2] = adj->vrefresh; |
| buf[3] = 0x00; |
| buf[4] = adj->hdisplay; |
| buf[5] = adj->hdisplay >> 8; |
| buf[6] = adj->vdisplay; |
| buf[7] = adj->vdisplay >> 8; |
| buf[8] = SII902X_TPI_CLK_RATIO_1X | SII902X_TPI_AVI_PIXEL_REP_NONE | |
| SII902X_TPI_AVI_PIXEL_REP_BUS_24BIT; |
| buf[9] = SII902X_TPI_AVI_INPUT_RANGE_AUTO | |
| SII902X_TPI_AVI_INPUT_COLORSPACE_RGB; |
| |
| ret = regmap_bulk_write(regmap, SII902X_TPI_VIDEO_DATA, buf, 10); |
| if (ret) |
| return; |
| |
| ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, adj, false); |
| if (ret < 0) { |
| DRM_ERROR("couldn't fill AVI infoframe\n"); |
| return; |
| } |
| |
| ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf)); |
| if (ret < 0) { |
| DRM_ERROR("failed to pack AVI infoframe: %d\n", ret); |
| return; |
| } |
| |
| /* Do not send the infoframe header, but keep the CRC field. */ |
| regmap_bulk_write(regmap, SII902X_TPI_AVI_INFOFRAME, |
| buf + HDMI_INFOFRAME_HEADER_SIZE - 1, |
| HDMI_AVI_INFOFRAME_SIZE + 1); |
| } |
| |
| static int sii902x_bridge_attach(struct drm_bridge *bridge) |
| { |
| struct sii902x *sii902x = bridge_to_sii902x(bridge); |
| struct drm_device *drm = bridge->dev; |
| int ret; |
| |
| drm_connector_helper_add(&sii902x->connector, |
| &sii902x_connector_helper_funcs); |
| |
| if (!drm_core_check_feature(drm, DRIVER_ATOMIC)) { |
| dev_err(&sii902x->i2c->dev, |
| "sii902x driver is only compatible with DRM devices supporting atomic updates\n"); |
| return -ENOTSUPP; |
| } |
| |
| ret = drm_connector_init(drm, &sii902x->connector, |
| &sii902x_connector_funcs, |
| DRM_MODE_CONNECTOR_HDMIA); |
| if (ret) |
| return ret; |
| |
| if (sii902x->i2c->irq > 0) |
| sii902x->connector.polled = DRM_CONNECTOR_POLL_HPD; |
| else |
| sii902x->connector.polled = DRM_CONNECTOR_POLL_CONNECT; |
| |
| drm_mode_connector_attach_encoder(&sii902x->connector, bridge->encoder); |
| |
| return 0; |
| } |
| |
| static const struct drm_bridge_funcs sii902x_bridge_funcs = { |
| .attach = sii902x_bridge_attach, |
| .mode_set = sii902x_bridge_mode_set, |
| .disable = sii902x_bridge_disable, |
| .enable = sii902x_bridge_enable, |
| }; |
| |
| static const struct regmap_range sii902x_volatile_ranges[] = { |
| { .range_min = 0, .range_max = 0xff }, |
| }; |
| |
| static const struct regmap_access_table sii902x_volatile_table = { |
| .yes_ranges = sii902x_volatile_ranges, |
| .n_yes_ranges = ARRAY_SIZE(sii902x_volatile_ranges), |
| }; |
| |
| static const struct regmap_config sii902x_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .volatile_table = &sii902x_volatile_table, |
| .cache_type = REGCACHE_NONE, |
| }; |
| |
| static irqreturn_t sii902x_interrupt(int irq, void *data) |
| { |
| struct sii902x *sii902x = data; |
| unsigned int status = 0; |
| |
| regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status); |
| regmap_write(sii902x->regmap, SII902X_INT_STATUS, status); |
| |
| if ((status & SII902X_HOTPLUG_EVENT) && sii902x->bridge.dev) |
| drm_helper_hpd_irq_event(sii902x->bridge.dev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int sii902x_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct device *dev = &client->dev; |
| unsigned int status = 0; |
| struct sii902x *sii902x; |
| u8 chipid[4]; |
| int ret; |
| |
| sii902x = devm_kzalloc(dev, sizeof(*sii902x), GFP_KERNEL); |
| if (!sii902x) |
| return -ENOMEM; |
| |
| sii902x->i2c = client; |
| sii902x->regmap = devm_regmap_init_i2c(client, &sii902x_regmap_config); |
| if (IS_ERR(sii902x->regmap)) |
| return PTR_ERR(sii902x->regmap); |
| |
| sii902x->reset_gpio = devm_gpiod_get_optional(dev, "reset", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(sii902x->reset_gpio)) { |
| dev_err(dev, "Failed to retrieve/request reset gpio: %ld\n", |
| PTR_ERR(sii902x->reset_gpio)); |
| return PTR_ERR(sii902x->reset_gpio); |
| } |
| |
| sii902x_reset(sii902x); |
| |
| ret = regmap_write(sii902x->regmap, SII902X_REG_TPI_RQB, 0x0); |
| if (ret) |
| return ret; |
| |
| ret = regmap_bulk_read(sii902x->regmap, SII902X_REG_CHIPID(0), |
| &chipid, 4); |
| if (ret) { |
| dev_err(dev, "regmap_read failed %d\n", ret); |
| return ret; |
| } |
| |
| if (chipid[0] != 0xb0) { |
| dev_err(dev, "Invalid chipid: %02x (expecting 0xb0)\n", |
| chipid[0]); |
| return -EINVAL; |
| } |
| |
| /* Clear all pending interrupts */ |
| regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status); |
| regmap_write(sii902x->regmap, SII902X_INT_STATUS, status); |
| |
| if (client->irq > 0) { |
| regmap_write(sii902x->regmap, SII902X_INT_ENABLE, |
| SII902X_HOTPLUG_EVENT); |
| |
| ret = devm_request_threaded_irq(dev, client->irq, NULL, |
| sii902x_interrupt, |
| IRQF_ONESHOT, dev_name(dev), |
| sii902x); |
| if (ret) |
| return ret; |
| } |
| |
| sii902x->bridge.funcs = &sii902x_bridge_funcs; |
| sii902x->bridge.of_node = dev->of_node; |
| drm_bridge_add(&sii902x->bridge); |
| |
| i2c_set_clientdata(client, sii902x); |
| |
| return 0; |
| } |
| |
| static int sii902x_remove(struct i2c_client *client) |
| |
| { |
| struct sii902x *sii902x = i2c_get_clientdata(client); |
| |
| drm_bridge_remove(&sii902x->bridge); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id sii902x_dt_ids[] = { |
| { .compatible = "sil,sii9022", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, sii902x_dt_ids); |
| |
| static const struct i2c_device_id sii902x_i2c_ids[] = { |
| { "sii9022", 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, sii902x_i2c_ids); |
| |
| static struct i2c_driver sii902x_driver = { |
| .probe = sii902x_probe, |
| .remove = sii902x_remove, |
| .driver = { |
| .name = "sii902x", |
| .of_match_table = sii902x_dt_ids, |
| }, |
| .id_table = sii902x_i2c_ids, |
| }; |
| module_i2c_driver(sii902x_driver); |
| |
| MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>"); |
| MODULE_DESCRIPTION("SII902x RGB -> HDMI bridges"); |
| MODULE_LICENSE("GPL"); |