| /* |
| * regmap based irq_chip |
| * |
| * Copyright 2011 Wolfson Microelectronics plc |
| * |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/export.h> |
| #include <linux/device.h> |
| #include <linux/regmap.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/irqdomain.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/slab.h> |
| |
| #include "internal.h" |
| |
| struct regmap_irq_chip_data { |
| struct mutex lock; |
| struct irq_chip irq_chip; |
| |
| struct regmap *map; |
| const struct regmap_irq_chip *chip; |
| |
| int irq_base; |
| struct irq_domain *domain; |
| |
| int irq; |
| int wake_count; |
| |
| unsigned int *status_buf; |
| unsigned int *mask_buf; |
| unsigned int *mask_buf_def; |
| unsigned int *wake_buf; |
| |
| unsigned int irq_reg_stride; |
| }; |
| |
| static inline const |
| struct regmap_irq *irq_to_regmap_irq(struct regmap_irq_chip_data *data, |
| int irq) |
| { |
| return &data->chip->irqs[irq]; |
| } |
| |
| static void regmap_irq_lock(struct irq_data *data) |
| { |
| struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data); |
| |
| mutex_lock(&d->lock); |
| } |
| |
| static void regmap_irq_sync_unlock(struct irq_data *data) |
| { |
| struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data); |
| struct regmap *map = d->map; |
| int i, ret; |
| u32 reg; |
| |
| if (d->chip->runtime_pm) { |
| ret = pm_runtime_get_sync(map->dev); |
| if (ret < 0) |
| dev_err(map->dev, "IRQ sync failed to resume: %d\n", |
| ret); |
| } |
| |
| /* |
| * If there's been a change in the mask write it back to the |
| * hardware. We rely on the use of the regmap core cache to |
| * suppress pointless writes. |
| */ |
| for (i = 0; i < d->chip->num_regs; i++) { |
| reg = d->chip->mask_base + |
| (i * map->reg_stride * d->irq_reg_stride); |
| if (d->chip->mask_invert) |
| ret = regmap_update_bits(d->map, reg, |
| d->mask_buf_def[i], ~d->mask_buf[i]); |
| else |
| ret = regmap_update_bits(d->map, reg, |
| d->mask_buf_def[i], d->mask_buf[i]); |
| if (ret != 0) |
| dev_err(d->map->dev, "Failed to sync masks in %x\n", |
| reg); |
| } |
| |
| if (d->chip->runtime_pm) |
| pm_runtime_put(map->dev); |
| |
| /* If we've changed our wakeup count propagate it to the parent */ |
| if (d->wake_count < 0) |
| for (i = d->wake_count; i < 0; i++) |
| irq_set_irq_wake(d->irq, 0); |
| else if (d->wake_count > 0) |
| for (i = 0; i < d->wake_count; i++) |
| irq_set_irq_wake(d->irq, 1); |
| |
| d->wake_count = 0; |
| |
| mutex_unlock(&d->lock); |
| } |
| |
| static void regmap_irq_enable(struct irq_data *data) |
| { |
| struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data); |
| struct regmap *map = d->map; |
| const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq); |
| |
| d->mask_buf[irq_data->reg_offset / map->reg_stride] &= ~irq_data->mask; |
| } |
| |
| static void regmap_irq_disable(struct irq_data *data) |
| { |
| struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data); |
| struct regmap *map = d->map; |
| const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq); |
| |
| d->mask_buf[irq_data->reg_offset / map->reg_stride] |= irq_data->mask; |
| } |
| |
| static int regmap_irq_set_wake(struct irq_data *data, unsigned int on) |
| { |
| struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data); |
| struct regmap *map = d->map; |
| const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq); |
| |
| if (!d->chip->wake_base) |
| return -EINVAL; |
| |
| if (on) { |
| d->wake_buf[irq_data->reg_offset / map->reg_stride] |
| &= ~irq_data->mask; |
| d->wake_count++; |
| } else { |
| d->wake_buf[irq_data->reg_offset / map->reg_stride] |
| |= irq_data->mask; |
| d->wake_count--; |
| } |
| |
| return 0; |
| } |
| |
| static const struct irq_chip regmap_irq_chip = { |
| .irq_bus_lock = regmap_irq_lock, |
| .irq_bus_sync_unlock = regmap_irq_sync_unlock, |
| .irq_disable = regmap_irq_disable, |
| .irq_enable = regmap_irq_enable, |
| .irq_set_wake = regmap_irq_set_wake, |
| }; |
| |
| static irqreturn_t regmap_irq_thread(int irq, void *d) |
| { |
| struct regmap_irq_chip_data *data = d; |
| const struct regmap_irq_chip *chip = data->chip; |
| struct regmap *map = data->map; |
| int ret, i; |
| bool handled = false; |
| u32 reg; |
| |
| if (chip->runtime_pm) { |
| ret = pm_runtime_get_sync(map->dev); |
| if (ret < 0) { |
| dev_err(map->dev, "IRQ thread failed to resume: %d\n", |
| ret); |
| return IRQ_NONE; |
| } |
| } |
| |
| /* |
| * Ignore masked IRQs and ack if we need to; we ack early so |
| * there is no race between handling and acknowleding the |
| * interrupt. We assume that typically few of the interrupts |
| * will fire simultaneously so don't worry about overhead from |
| * doing a write per register. |
| */ |
| for (i = 0; i < data->chip->num_regs; i++) { |
| ret = regmap_read(map, chip->status_base + (i * map->reg_stride |
| * data->irq_reg_stride), |
| &data->status_buf[i]); |
| |
| if (ret != 0) { |
| dev_err(map->dev, "Failed to read IRQ status: %d\n", |
| ret); |
| if (chip->runtime_pm) |
| pm_runtime_put(map->dev); |
| return IRQ_NONE; |
| } |
| |
| data->status_buf[i] &= ~data->mask_buf[i]; |
| |
| if (data->status_buf[i] && chip->ack_base) { |
| reg = chip->ack_base + |
| (i * map->reg_stride * data->irq_reg_stride); |
| ret = regmap_write(map, reg, data->status_buf[i]); |
| if (ret != 0) |
| dev_err(map->dev, "Failed to ack 0x%x: %d\n", |
| reg, ret); |
| } |
| } |
| |
| for (i = 0; i < chip->num_irqs; i++) { |
| if (data->status_buf[chip->irqs[i].reg_offset / |
| map->reg_stride] & chip->irqs[i].mask) { |
| handle_nested_irq(irq_find_mapping(data->domain, i)); |
| handled = true; |
| } |
| } |
| |
| if (chip->runtime_pm) |
| pm_runtime_put(map->dev); |
| |
| if (handled) |
| return IRQ_HANDLED; |
| else |
| return IRQ_NONE; |
| } |
| |
| static int regmap_irq_map(struct irq_domain *h, unsigned int virq, |
| irq_hw_number_t hw) |
| { |
| struct regmap_irq_chip_data *data = h->host_data; |
| |
| irq_set_chip_data(virq, data); |
| irq_set_chip(virq, &data->irq_chip); |
| irq_set_nested_thread(virq, 1); |
| |
| /* ARM needs us to explicitly flag the IRQ as valid |
| * and will set them noprobe when we do so. */ |
| #ifdef CONFIG_ARM |
| set_irq_flags(virq, IRQF_VALID); |
| #else |
| irq_set_noprobe(virq); |
| #endif |
| |
| return 0; |
| } |
| |
| static struct irq_domain_ops regmap_domain_ops = { |
| .map = regmap_irq_map, |
| .xlate = irq_domain_xlate_twocell, |
| }; |
| |
| /** |
| * regmap_add_irq_chip(): Use standard regmap IRQ controller handling |
| * |
| * map: The regmap for the device. |
| * irq: The IRQ the device uses to signal interrupts |
| * irq_flags: The IRQF_ flags to use for the primary interrupt. |
| * chip: Configuration for the interrupt controller. |
| * data: Runtime data structure for the controller, allocated on success |
| * |
| * Returns 0 on success or an errno on failure. |
| * |
| * In order for this to be efficient the chip really should use a |
| * register cache. The chip driver is responsible for restoring the |
| * register values used by the IRQ controller over suspend and resume. |
| */ |
| int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, |
| int irq_base, const struct regmap_irq_chip *chip, |
| struct regmap_irq_chip_data **data) |
| { |
| struct regmap_irq_chip_data *d; |
| int i; |
| int ret = -ENOMEM; |
| u32 reg; |
| |
| for (i = 0; i < chip->num_irqs; i++) { |
| if (chip->irqs[i].reg_offset % map->reg_stride) |
| return -EINVAL; |
| if (chip->irqs[i].reg_offset / map->reg_stride >= |
| chip->num_regs) |
| return -EINVAL; |
| } |
| |
| if (irq_base) { |
| irq_base = irq_alloc_descs(irq_base, 0, chip->num_irqs, 0); |
| if (irq_base < 0) { |
| dev_warn(map->dev, "Failed to allocate IRQs: %d\n", |
| irq_base); |
| return irq_base; |
| } |
| } |
| |
| d = kzalloc(sizeof(*d), GFP_KERNEL); |
| if (!d) |
| return -ENOMEM; |
| |
| *data = d; |
| |
| d->status_buf = kzalloc(sizeof(unsigned int) * chip->num_regs, |
| GFP_KERNEL); |
| if (!d->status_buf) |
| goto err_alloc; |
| |
| d->mask_buf = kzalloc(sizeof(unsigned int) * chip->num_regs, |
| GFP_KERNEL); |
| if (!d->mask_buf) |
| goto err_alloc; |
| |
| d->mask_buf_def = kzalloc(sizeof(unsigned int) * chip->num_regs, |
| GFP_KERNEL); |
| if (!d->mask_buf_def) |
| goto err_alloc; |
| |
| if (chip->wake_base) { |
| d->wake_buf = kzalloc(sizeof(unsigned int) * chip->num_regs, |
| GFP_KERNEL); |
| if (!d->wake_buf) |
| goto err_alloc; |
| } |
| |
| d->irq_chip = regmap_irq_chip; |
| d->irq_chip.name = chip->name; |
| if (!chip->wake_base) { |
| d->irq_chip.irq_set_wake = NULL; |
| d->irq_chip.flags |= IRQCHIP_MASK_ON_SUSPEND | |
| IRQCHIP_SKIP_SET_WAKE; |
| } |
| d->irq = irq; |
| d->map = map; |
| d->chip = chip; |
| d->irq_base = irq_base; |
| |
| if (chip->irq_reg_stride) |
| d->irq_reg_stride = chip->irq_reg_stride; |
| else |
| d->irq_reg_stride = 1; |
| |
| mutex_init(&d->lock); |
| |
| for (i = 0; i < chip->num_irqs; i++) |
| d->mask_buf_def[chip->irqs[i].reg_offset / map->reg_stride] |
| |= chip->irqs[i].mask; |
| |
| /* Mask all the interrupts by default */ |
| for (i = 0; i < chip->num_regs; i++) { |
| d->mask_buf[i] = d->mask_buf_def[i]; |
| reg = chip->mask_base + |
| (i * map->reg_stride * d->irq_reg_stride); |
| if (chip->mask_invert) |
| ret = regmap_update_bits(map, reg, |
| d->mask_buf[i], ~d->mask_buf[i]); |
| else |
| ret = regmap_update_bits(map, reg, |
| d->mask_buf[i], d->mask_buf[i]); |
| if (ret != 0) { |
| dev_err(map->dev, "Failed to set masks in 0x%x: %d\n", |
| reg, ret); |
| goto err_alloc; |
| } |
| } |
| |
| /* Wake is disabled by default */ |
| if (d->wake_buf) { |
| for (i = 0; i < chip->num_regs; i++) { |
| d->wake_buf[i] = d->mask_buf_def[i]; |
| reg = chip->wake_base + |
| (i * map->reg_stride * d->irq_reg_stride); |
| ret = regmap_update_bits(map, reg, d->wake_buf[i], |
| d->wake_buf[i]); |
| if (ret != 0) { |
| dev_err(map->dev, "Failed to set masks in 0x%x: %d\n", |
| reg, ret); |
| goto err_alloc; |
| } |
| } |
| } |
| |
| if (irq_base) |
| d->domain = irq_domain_add_legacy(map->dev->of_node, |
| chip->num_irqs, irq_base, 0, |
| ®map_domain_ops, d); |
| else |
| d->domain = irq_domain_add_linear(map->dev->of_node, |
| chip->num_irqs, |
| ®map_domain_ops, d); |
| if (!d->domain) { |
| dev_err(map->dev, "Failed to create IRQ domain\n"); |
| ret = -ENOMEM; |
| goto err_alloc; |
| } |
| |
| ret = request_threaded_irq(irq, NULL, regmap_irq_thread, irq_flags, |
| chip->name, d); |
| if (ret != 0) { |
| dev_err(map->dev, "Failed to request IRQ %d: %d\n", irq, ret); |
| goto err_domain; |
| } |
| |
| return 0; |
| |
| err_domain: |
| /* Should really dispose of the domain but... */ |
| err_alloc: |
| kfree(d->wake_buf); |
| kfree(d->mask_buf_def); |
| kfree(d->mask_buf); |
| kfree(d->status_buf); |
| kfree(d); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(regmap_add_irq_chip); |
| |
| /** |
| * regmap_del_irq_chip(): Stop interrupt handling for a regmap IRQ chip |
| * |
| * @irq: Primary IRQ for the device |
| * @d: regmap_irq_chip_data allocated by regmap_add_irq_chip() |
| */ |
| void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *d) |
| { |
| if (!d) |
| return; |
| |
| free_irq(irq, d); |
| /* We should unmap the domain but... */ |
| kfree(d->wake_buf); |
| kfree(d->mask_buf_def); |
| kfree(d->mask_buf); |
| kfree(d->status_buf); |
| kfree(d); |
| } |
| EXPORT_SYMBOL_GPL(regmap_del_irq_chip); |
| |
| /** |
| * regmap_irq_chip_get_base(): Retrieve interrupt base for a regmap IRQ chip |
| * |
| * Useful for drivers to request their own IRQs. |
| * |
| * @data: regmap_irq controller to operate on. |
| */ |
| int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data) |
| { |
| WARN_ON(!data->irq_base); |
| return data->irq_base; |
| } |
| EXPORT_SYMBOL_GPL(regmap_irq_chip_get_base); |
| |
| /** |
| * regmap_irq_get_virq(): Map an interrupt on a chip to a virtual IRQ |
| * |
| * Useful for drivers to request their own IRQs. |
| * |
| * @data: regmap_irq controller to operate on. |
| * @irq: index of the interrupt requested in the chip IRQs |
| */ |
| int regmap_irq_get_virq(struct regmap_irq_chip_data *data, int irq) |
| { |
| /* Handle holes in the IRQ list */ |
| if (!data->chip->irqs[irq].mask) |
| return -EINVAL; |
| |
| return irq_create_mapping(data->domain, irq); |
| } |
| EXPORT_SYMBOL_GPL(regmap_irq_get_virq); |
| |
| /** |
| * regmap_irq_get_domain(): Retrieve the irq_domain for the chip |
| * |
| * Useful for drivers to request their own IRQs and for integration |
| * with subsystems. For ease of integration NULL is accepted as a |
| * domain, allowing devices to just call this even if no domain is |
| * allocated. |
| * |
| * @data: regmap_irq controller to operate on. |
| */ |
| struct irq_domain *regmap_irq_get_domain(struct regmap_irq_chip_data *data) |
| { |
| if (data) |
| return data->domain; |
| else |
| return NULL; |
| } |
| EXPORT_SYMBOL_GPL(regmap_irq_get_domain); |