| /* |
| * Copyright 2006 Dave Airlie <airlied@linux.ie> |
| * Copyright © 2006-2007 Intel Corporation |
| * Jesse Barnes <jesse.barnes@intel.com> |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: |
| * Eric Anholt <eric@anholt.net> |
| */ |
| #include <linux/i2c.h> |
| #include <linux/delay.h> |
| #include "drmP.h" |
| #include "drm.h" |
| #include "drm_crtc.h" |
| #include "intel_drv.h" |
| #include "i915_drm.h" |
| #include "i915_drv.h" |
| #include "intel_sdvo_regs.h" |
| |
| #undef SDVO_DEBUG |
| |
| struct intel_sdvo_priv { |
| struct intel_i2c_chan *i2c_bus; |
| int slaveaddr; |
| int output_device; |
| |
| u16 active_outputs; |
| |
| struct intel_sdvo_caps caps; |
| int pixel_clock_min, pixel_clock_max; |
| |
| int save_sdvo_mult; |
| u16 save_active_outputs; |
| struct intel_sdvo_dtd save_input_dtd_1, save_input_dtd_2; |
| struct intel_sdvo_dtd save_output_dtd[16]; |
| u32 save_SDVOX; |
| }; |
| |
| /** |
| * Writes the SDVOB or SDVOC with the given value, but always writes both |
| * SDVOB and SDVOC to work around apparent hardware issues (according to |
| * comments in the BIOS). |
| */ |
| static void intel_sdvo_write_sdvox(struct intel_output *intel_output, u32 val) |
| { |
| struct drm_device *dev = intel_output->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; |
| u32 bval = val, cval = val; |
| int i; |
| |
| if (sdvo_priv->output_device == SDVOB) { |
| cval = I915_READ(SDVOC); |
| } else { |
| bval = I915_READ(SDVOB); |
| } |
| /* |
| * Write the registers twice for luck. Sometimes, |
| * writing them only once doesn't appear to 'stick'. |
| * The BIOS does this too. Yay, magic |
| */ |
| for (i = 0; i < 2; i++) |
| { |
| I915_WRITE(SDVOB, bval); |
| I915_READ(SDVOB); |
| I915_WRITE(SDVOC, cval); |
| I915_READ(SDVOC); |
| } |
| } |
| |
| static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr, |
| u8 *ch) |
| { |
| struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; |
| u8 out_buf[2]; |
| u8 buf[2]; |
| int ret; |
| |
| struct i2c_msg msgs[] = { |
| { |
| .addr = sdvo_priv->i2c_bus->slave_addr, |
| .flags = 0, |
| .len = 1, |
| .buf = out_buf, |
| }, |
| { |
| .addr = sdvo_priv->i2c_bus->slave_addr, |
| .flags = I2C_M_RD, |
| .len = 1, |
| .buf = buf, |
| } |
| }; |
| |
| out_buf[0] = addr; |
| out_buf[1] = 0; |
| |
| if ((ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2)) == 2) |
| { |
| *ch = buf[0]; |
| return true; |
| } |
| |
| DRM_DEBUG("i2c transfer returned %d\n", ret); |
| return false; |
| } |
| |
| static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr, |
| u8 ch) |
| { |
| u8 out_buf[2]; |
| struct i2c_msg msgs[] = { |
| { |
| .addr = intel_output->i2c_bus->slave_addr, |
| .flags = 0, |
| .len = 2, |
| .buf = out_buf, |
| } |
| }; |
| |
| out_buf[0] = addr; |
| out_buf[1] = ch; |
| |
| if (i2c_transfer(&intel_output->i2c_bus->adapter, msgs, 1) == 1) |
| { |
| return true; |
| } |
| return false; |
| } |
| |
| #define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd} |
| /** Mapping of command numbers to names, for debug output */ |
| const static struct _sdvo_cmd_name { |
| u8 cmd; |
| char *name; |
| } sdvo_cmd_names[] = { |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FIRMWARE_REV), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TRAINED_INPUTS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_OUTPUTS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_OUTPUTS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_IN_OUT_MAP), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_IN_OUT_MAP), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ATTACHED_DISPLAYS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HOT_PLUG_SUPPORT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_HOT_PLUG), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_HOT_PLUG), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_INPUT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_OUTPUT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART1), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART2), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART2), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART1), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART2), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART1), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART2), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CLOCK_RATE_MULT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CLOCK_RATE_MULT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_RESOLUTION_SUPPORT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH), |
| }; |
| |
| #define SDVO_NAME(dev_priv) ((dev_priv)->output_device == SDVOB ? "SDVOB" : "SDVOC") |
| #define SDVO_PRIV(output) ((struct intel_sdvo_priv *) (output)->dev_priv) |
| |
| #ifdef SDVO_DEBUG |
| static void intel_sdvo_debug_write(struct intel_output *intel_output, u8 cmd, |
| void *args, int args_len) |
| { |
| struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; |
| int i; |
| |
| DRM_DEBUG("%s: W: %02X ", SDVO_NAME(sdvo_priv), cmd); |
| for (i = 0; i < args_len; i++) |
| printk("%02X ", ((u8 *)args)[i]); |
| for (; i < 8; i++) |
| printk(" "); |
| for (i = 0; i < sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0]); i++) { |
| if (cmd == sdvo_cmd_names[i].cmd) { |
| printk("(%s)", sdvo_cmd_names[i].name); |
| break; |
| } |
| } |
| if (i == sizeof(sdvo_cmd_names)/ sizeof(sdvo_cmd_names[0])) |
| printk("(%02X)",cmd); |
| printk("\n"); |
| } |
| #else |
| #define intel_sdvo_debug_write(o, c, a, l) |
| #endif |
| |
| static void intel_sdvo_write_cmd(struct intel_output *intel_output, u8 cmd, |
| void *args, int args_len) |
| { |
| int i; |
| |
| intel_sdvo_debug_write(intel_output, cmd, args, args_len); |
| |
| for (i = 0; i < args_len; i++) { |
| intel_sdvo_write_byte(intel_output, SDVO_I2C_ARG_0 - i, |
| ((u8*)args)[i]); |
| } |
| |
| intel_sdvo_write_byte(intel_output, SDVO_I2C_OPCODE, cmd); |
| } |
| |
| #ifdef SDVO_DEBUG |
| static const char *cmd_status_names[] = { |
| "Power on", |
| "Success", |
| "Not supported", |
| "Invalid arg", |
| "Pending", |
| "Target not specified", |
| "Scaling not supported" |
| }; |
| |
| static void intel_sdvo_debug_response(struct intel_output *intel_output, |
| void *response, int response_len, |
| u8 status) |
| { |
| struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; |
| |
| DRM_DEBUG("%s: R: ", SDVO_NAME(sdvo_priv)); |
| for (i = 0; i < response_len; i++) |
| printk("%02X ", ((u8 *)response)[i]); |
| for (; i < 8; i++) |
| printk(" "); |
| if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP) |
| printk("(%s)", cmd_status_names[status]); |
| else |
| printk("(??? %d)", status); |
| printk("\n"); |
| } |
| #else |
| #define intel_sdvo_debug_response(o, r, l, s) |
| #endif |
| |
| static u8 intel_sdvo_read_response(struct intel_output *intel_output, |
| void *response, int response_len) |
| { |
| int i; |
| u8 status; |
| u8 retry = 50; |
| |
| while (retry--) { |
| /* Read the command response */ |
| for (i = 0; i < response_len; i++) { |
| intel_sdvo_read_byte(intel_output, |
| SDVO_I2C_RETURN_0 + i, |
| &((u8 *)response)[i]); |
| } |
| |
| /* read the return status */ |
| intel_sdvo_read_byte(intel_output, SDVO_I2C_CMD_STATUS, |
| &status); |
| |
| intel_sdvo_debug_response(intel_output, response, response_len, |
| status); |
| if (status != SDVO_CMD_STATUS_PENDING) |
| return status; |
| |
| mdelay(50); |
| } |
| |
| return status; |
| } |
| |
| static int intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode) |
| { |
| if (mode->clock >= 100000) |
| return 1; |
| else if (mode->clock >= 50000) |
| return 2; |
| else |
| return 4; |
| } |
| |
| /** |
| * Don't check status code from this as it switches the bus back to the |
| * SDVO chips which defeats the purpose of doing a bus switch in the first |
| * place. |
| */ |
| static void intel_sdvo_set_control_bus_switch(struct intel_output *intel_output, |
| u8 target) |
| { |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH, &target, 1); |
| } |
| |
| static bool intel_sdvo_set_target_input(struct intel_output *intel_output, bool target_0, bool target_1) |
| { |
| struct intel_sdvo_set_target_input_args targets = {0}; |
| u8 status; |
| |
| if (target_0 && target_1) |
| return SDVO_CMD_STATUS_NOTSUPP; |
| |
| if (target_1) |
| targets.target_1 = 1; |
| |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_TARGET_INPUT, &targets, |
| sizeof(targets)); |
| |
| status = intel_sdvo_read_response(intel_output, NULL, 0); |
| |
| return (status == SDVO_CMD_STATUS_SUCCESS); |
| } |
| |
| /** |
| * Return whether each input is trained. |
| * |
| * This function is making an assumption about the layout of the response, |
| * which should be checked against the docs. |
| */ |
| static bool intel_sdvo_get_trained_inputs(struct intel_output *intel_output, bool *input_1, bool *input_2) |
| { |
| struct intel_sdvo_get_trained_inputs_response response; |
| u8 status; |
| |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_TRAINED_INPUTS, NULL, 0); |
| status = intel_sdvo_read_response(intel_output, &response, sizeof(response)); |
| if (status != SDVO_CMD_STATUS_SUCCESS) |
| return false; |
| |
| *input_1 = response.input0_trained; |
| *input_2 = response.input1_trained; |
| return true; |
| } |
| |
| static bool intel_sdvo_get_active_outputs(struct intel_output *intel_output, |
| u16 *outputs) |
| { |
| u8 status; |
| |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ACTIVE_OUTPUTS, NULL, 0); |
| status = intel_sdvo_read_response(intel_output, outputs, sizeof(*outputs)); |
| |
| return (status == SDVO_CMD_STATUS_SUCCESS); |
| } |
| |
| static bool intel_sdvo_set_active_outputs(struct intel_output *intel_output, |
| u16 outputs) |
| { |
| u8 status; |
| |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ACTIVE_OUTPUTS, &outputs, |
| sizeof(outputs)); |
| status = intel_sdvo_read_response(intel_output, NULL, 0); |
| return (status == SDVO_CMD_STATUS_SUCCESS); |
| } |
| |
| static bool intel_sdvo_set_encoder_power_state(struct intel_output *intel_output, |
| int mode) |
| { |
| u8 status, state = SDVO_ENCODER_STATE_ON; |
| |
| switch (mode) { |
| case DRM_MODE_DPMS_ON: |
| state = SDVO_ENCODER_STATE_ON; |
| break; |
| case DRM_MODE_DPMS_STANDBY: |
| state = SDVO_ENCODER_STATE_STANDBY; |
| break; |
| case DRM_MODE_DPMS_SUSPEND: |
| state = SDVO_ENCODER_STATE_SUSPEND; |
| break; |
| case DRM_MODE_DPMS_OFF: |
| state = SDVO_ENCODER_STATE_OFF; |
| break; |
| } |
| |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ENCODER_POWER_STATE, &state, |
| sizeof(state)); |
| status = intel_sdvo_read_response(intel_output, NULL, 0); |
| |
| return (status == SDVO_CMD_STATUS_SUCCESS); |
| } |
| |
| static bool intel_sdvo_get_input_pixel_clock_range(struct intel_output *intel_output, |
| int *clock_min, |
| int *clock_max) |
| { |
| struct intel_sdvo_pixel_clock_range clocks; |
| u8 status; |
| |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE, |
| NULL, 0); |
| |
| status = intel_sdvo_read_response(intel_output, &clocks, sizeof(clocks)); |
| |
| if (status != SDVO_CMD_STATUS_SUCCESS) |
| return false; |
| |
| /* Convert the values from units of 10 kHz to kHz. */ |
| *clock_min = clocks.min * 10; |
| *clock_max = clocks.max * 10; |
| |
| return true; |
| } |
| |
| static bool intel_sdvo_set_target_output(struct intel_output *intel_output, |
| u16 outputs) |
| { |
| u8 status; |
| |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_TARGET_OUTPUT, &outputs, |
| sizeof(outputs)); |
| |
| status = intel_sdvo_read_response(intel_output, NULL, 0); |
| return (status == SDVO_CMD_STATUS_SUCCESS); |
| } |
| |
| static bool intel_sdvo_get_timing(struct intel_output *intel_output, u8 cmd, |
| struct intel_sdvo_dtd *dtd) |
| { |
| u8 status; |
| |
| intel_sdvo_write_cmd(intel_output, cmd, NULL, 0); |
| status = intel_sdvo_read_response(intel_output, &dtd->part1, |
| sizeof(dtd->part1)); |
| if (status != SDVO_CMD_STATUS_SUCCESS) |
| return false; |
| |
| intel_sdvo_write_cmd(intel_output, cmd + 1, NULL, 0); |
| status = intel_sdvo_read_response(intel_output, &dtd->part2, |
| sizeof(dtd->part2)); |
| if (status != SDVO_CMD_STATUS_SUCCESS) |
| return false; |
| |
| return true; |
| } |
| |
| static bool intel_sdvo_get_input_timing(struct intel_output *intel_output, |
| struct intel_sdvo_dtd *dtd) |
| { |
| return intel_sdvo_get_timing(intel_output, |
| SDVO_CMD_GET_INPUT_TIMINGS_PART1, dtd); |
| } |
| |
| static bool intel_sdvo_get_output_timing(struct intel_output *intel_output, |
| struct intel_sdvo_dtd *dtd) |
| { |
| return intel_sdvo_get_timing(intel_output, |
| SDVO_CMD_GET_OUTPUT_TIMINGS_PART1, dtd); |
| } |
| |
| static bool intel_sdvo_set_timing(struct intel_output *intel_output, u8 cmd, |
| struct intel_sdvo_dtd *dtd) |
| { |
| u8 status; |
| |
| intel_sdvo_write_cmd(intel_output, cmd, &dtd->part1, sizeof(dtd->part1)); |
| status = intel_sdvo_read_response(intel_output, NULL, 0); |
| if (status != SDVO_CMD_STATUS_SUCCESS) |
| return false; |
| |
| intel_sdvo_write_cmd(intel_output, cmd + 1, &dtd->part2, sizeof(dtd->part2)); |
| status = intel_sdvo_read_response(intel_output, NULL, 0); |
| if (status != SDVO_CMD_STATUS_SUCCESS) |
| return false; |
| |
| return true; |
| } |
| |
| static bool intel_sdvo_set_input_timing(struct intel_output *intel_output, |
| struct intel_sdvo_dtd *dtd) |
| { |
| return intel_sdvo_set_timing(intel_output, |
| SDVO_CMD_SET_INPUT_TIMINGS_PART1, dtd); |
| } |
| |
| static bool intel_sdvo_set_output_timing(struct intel_output *intel_output, |
| struct intel_sdvo_dtd *dtd) |
| { |
| return intel_sdvo_set_timing(intel_output, |
| SDVO_CMD_SET_OUTPUT_TIMINGS_PART1, dtd); |
| } |
| |
| |
| static int intel_sdvo_get_clock_rate_mult(struct intel_output *intel_output) |
| { |
| u8 response, status; |
| |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_CLOCK_RATE_MULT, NULL, 0); |
| status = intel_sdvo_read_response(intel_output, &response, 1); |
| |
| if (status != SDVO_CMD_STATUS_SUCCESS) { |
| DRM_DEBUG("Couldn't get SDVO clock rate multiplier\n"); |
| return SDVO_CLOCK_RATE_MULT_1X; |
| } else { |
| DRM_DEBUG("Current clock rate multiplier: %d\n", response); |
| } |
| |
| return response; |
| } |
| |
| static bool intel_sdvo_set_clock_rate_mult(struct intel_output *intel_output, u8 val) |
| { |
| u8 status; |
| |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CLOCK_RATE_MULT, &val, 1); |
| status = intel_sdvo_read_response(intel_output, NULL, 0); |
| if (status != SDVO_CMD_STATUS_SUCCESS) |
| return false; |
| |
| return true; |
| } |
| |
| static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder, |
| struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| /* Make the CRTC code factor in the SDVO pixel multiplier. The SDVO |
| * device will be told of the multiplier during mode_set. |
| */ |
| adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode); |
| return true; |
| } |
| |
| static void intel_sdvo_mode_set(struct drm_encoder *encoder, |
| struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_crtc *crtc = encoder->crtc; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| struct intel_output *intel_output = enc_to_intel_output(encoder); |
| struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; |
| u16 width, height; |
| u16 h_blank_len, h_sync_len, v_blank_len, v_sync_len; |
| u16 h_sync_offset, v_sync_offset; |
| u32 sdvox; |
| struct intel_sdvo_dtd output_dtd; |
| int sdvo_pixel_multiply; |
| |
| if (!mode) |
| return; |
| |
| width = mode->crtc_hdisplay; |
| height = mode->crtc_vdisplay; |
| |
| /* do some mode translations */ |
| h_blank_len = mode->crtc_hblank_end - mode->crtc_hblank_start; |
| h_sync_len = mode->crtc_hsync_end - mode->crtc_hsync_start; |
| |
| v_blank_len = mode->crtc_vblank_end - mode->crtc_vblank_start; |
| v_sync_len = mode->crtc_vsync_end - mode->crtc_vsync_start; |
| |
| h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start; |
| v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start; |
| |
| output_dtd.part1.clock = mode->clock / 10; |
| output_dtd.part1.h_active = width & 0xff; |
| output_dtd.part1.h_blank = h_blank_len & 0xff; |
| output_dtd.part1.h_high = (((width >> 8) & 0xf) << 4) | |
| ((h_blank_len >> 8) & 0xf); |
| output_dtd.part1.v_active = height & 0xff; |
| output_dtd.part1.v_blank = v_blank_len & 0xff; |
| output_dtd.part1.v_high = (((height >> 8) & 0xf) << 4) | |
| ((v_blank_len >> 8) & 0xf); |
| |
| output_dtd.part2.h_sync_off = h_sync_offset; |
| output_dtd.part2.h_sync_width = h_sync_len & 0xff; |
| output_dtd.part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 | |
| (v_sync_len & 0xf); |
| output_dtd.part2.sync_off_width_high = ((h_sync_offset & 0x300) >> 2) | |
| ((h_sync_len & 0x300) >> 4) | ((v_sync_offset & 0x30) >> 2) | |
| ((v_sync_len & 0x30) >> 4); |
| |
| output_dtd.part2.dtd_flags = 0x18; |
| if (mode->flags & DRM_MODE_FLAG_PHSYNC) |
| output_dtd.part2.dtd_flags |= 0x2; |
| if (mode->flags & DRM_MODE_FLAG_PVSYNC) |
| output_dtd.part2.dtd_flags |= 0x4; |
| |
| output_dtd.part2.sdvo_flags = 0; |
| output_dtd.part2.v_sync_off_high = v_sync_offset & 0xc0; |
| output_dtd.part2.reserved = 0; |
| |
| /* Set the output timing to the screen */ |
| intel_sdvo_set_target_output(intel_output, sdvo_priv->active_outputs); |
| intel_sdvo_set_output_timing(intel_output, &output_dtd); |
| |
| /* Set the input timing to the screen. Assume always input 0. */ |
| intel_sdvo_set_target_input(intel_output, true, false); |
| |
| /* We would like to use i830_sdvo_create_preferred_input_timing() to |
| * provide the device with a timing it can support, if it supports that |
| * feature. However, presumably we would need to adjust the CRTC to |
| * output the preferred timing, and we don't support that currently. |
| */ |
| intel_sdvo_set_input_timing(intel_output, &output_dtd); |
| |
| switch (intel_sdvo_get_pixel_multiplier(mode)) { |
| case 1: |
| intel_sdvo_set_clock_rate_mult(intel_output, |
| SDVO_CLOCK_RATE_MULT_1X); |
| break; |
| case 2: |
| intel_sdvo_set_clock_rate_mult(intel_output, |
| SDVO_CLOCK_RATE_MULT_2X); |
| break; |
| case 4: |
| intel_sdvo_set_clock_rate_mult(intel_output, |
| SDVO_CLOCK_RATE_MULT_4X); |
| break; |
| } |
| |
| /* Set the SDVO control regs. */ |
| if (0/*IS_I965GM(dev)*/) { |
| sdvox = SDVO_BORDER_ENABLE; |
| } else { |
| sdvox = I915_READ(sdvo_priv->output_device); |
| switch (sdvo_priv->output_device) { |
| case SDVOB: |
| sdvox &= SDVOB_PRESERVE_MASK; |
| break; |
| case SDVOC: |
| sdvox &= SDVOC_PRESERVE_MASK; |
| break; |
| } |
| sdvox |= (9 << 19) | SDVO_BORDER_ENABLE; |
| } |
| if (intel_crtc->pipe == 1) |
| sdvox |= SDVO_PIPE_B_SELECT; |
| |
| sdvo_pixel_multiply = intel_sdvo_get_pixel_multiplier(mode); |
| if (IS_I965G(dev)) { |
| /* done in crtc_mode_set as the dpll_md reg must be written |
| early */ |
| } else if (IS_I945G(dev) || IS_I945GM(dev)) { |
| /* done in crtc_mode_set as it lives inside the |
| dpll register */ |
| } else { |
| sdvox |= (sdvo_pixel_multiply - 1) << SDVO_PORT_MULTIPLY_SHIFT; |
| } |
| |
| intel_sdvo_write_sdvox(intel_output, sdvox); |
| } |
| |
| static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_output *intel_output = enc_to_intel_output(encoder); |
| struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; |
| u32 temp; |
| |
| if (mode != DRM_MODE_DPMS_ON) { |
| intel_sdvo_set_active_outputs(intel_output, 0); |
| if (0) |
| intel_sdvo_set_encoder_power_state(intel_output, mode); |
| |
| if (mode == DRM_MODE_DPMS_OFF) { |
| temp = I915_READ(sdvo_priv->output_device); |
| if ((temp & SDVO_ENABLE) != 0) { |
| intel_sdvo_write_sdvox(intel_output, temp & ~SDVO_ENABLE); |
| } |
| } |
| } else { |
| bool input1, input2; |
| int i; |
| u8 status; |
| |
| temp = I915_READ(sdvo_priv->output_device); |
| if ((temp & SDVO_ENABLE) == 0) |
| intel_sdvo_write_sdvox(intel_output, temp | SDVO_ENABLE); |
| for (i = 0; i < 2; i++) |
| intel_wait_for_vblank(dev); |
| |
| status = intel_sdvo_get_trained_inputs(intel_output, &input1, |
| &input2); |
| |
| |
| /* Warn if the device reported failure to sync. |
| * A lot of SDVO devices fail to notify of sync, but it's |
| * a given it the status is a success, we succeeded. |
| */ |
| if (status == SDVO_CMD_STATUS_SUCCESS && !input1) { |
| DRM_DEBUG("First %s output reported failure to sync\n", |
| SDVO_NAME(sdvo_priv)); |
| } |
| |
| if (0) |
| intel_sdvo_set_encoder_power_state(intel_output, mode); |
| intel_sdvo_set_active_outputs(intel_output, sdvo_priv->active_outputs); |
| } |
| return; |
| } |
| |
| static void intel_sdvo_save(struct drm_connector *connector) |
| { |
| struct drm_device *dev = connector->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_output *intel_output = to_intel_output(connector); |
| struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; |
| int o; |
| |
| sdvo_priv->save_sdvo_mult = intel_sdvo_get_clock_rate_mult(intel_output); |
| intel_sdvo_get_active_outputs(intel_output, &sdvo_priv->save_active_outputs); |
| |
| if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) { |
| intel_sdvo_set_target_input(intel_output, true, false); |
| intel_sdvo_get_input_timing(intel_output, |
| &sdvo_priv->save_input_dtd_1); |
| } |
| |
| if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) { |
| intel_sdvo_set_target_input(intel_output, false, true); |
| intel_sdvo_get_input_timing(intel_output, |
| &sdvo_priv->save_input_dtd_2); |
| } |
| |
| for (o = SDVO_OUTPUT_FIRST; o <= SDVO_OUTPUT_LAST; o++) |
| { |
| u16 this_output = (1 << o); |
| if (sdvo_priv->caps.output_flags & this_output) |
| { |
| intel_sdvo_set_target_output(intel_output, this_output); |
| intel_sdvo_get_output_timing(intel_output, |
| &sdvo_priv->save_output_dtd[o]); |
| } |
| } |
| |
| sdvo_priv->save_SDVOX = I915_READ(sdvo_priv->output_device); |
| } |
| |
| static void intel_sdvo_restore(struct drm_connector *connector) |
| { |
| struct drm_device *dev = connector->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_output *intel_output = to_intel_output(connector); |
| struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; |
| int o; |
| int i; |
| bool input1, input2; |
| u8 status; |
| |
| intel_sdvo_set_active_outputs(intel_output, 0); |
| |
| for (o = SDVO_OUTPUT_FIRST; o <= SDVO_OUTPUT_LAST; o++) |
| { |
| u16 this_output = (1 << o); |
| if (sdvo_priv->caps.output_flags & this_output) { |
| intel_sdvo_set_target_output(intel_output, this_output); |
| intel_sdvo_set_output_timing(intel_output, &sdvo_priv->save_output_dtd[o]); |
| } |
| } |
| |
| if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) { |
| intel_sdvo_set_target_input(intel_output, true, false); |
| intel_sdvo_set_input_timing(intel_output, &sdvo_priv->save_input_dtd_1); |
| } |
| |
| if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) { |
| intel_sdvo_set_target_input(intel_output, false, true); |
| intel_sdvo_set_input_timing(intel_output, &sdvo_priv->save_input_dtd_2); |
| } |
| |
| intel_sdvo_set_clock_rate_mult(intel_output, sdvo_priv->save_sdvo_mult); |
| |
| I915_WRITE(sdvo_priv->output_device, sdvo_priv->save_SDVOX); |
| |
| if (sdvo_priv->save_SDVOX & SDVO_ENABLE) |
| { |
| for (i = 0; i < 2; i++) |
| intel_wait_for_vblank(dev); |
| status = intel_sdvo_get_trained_inputs(intel_output, &input1, &input2); |
| if (status == SDVO_CMD_STATUS_SUCCESS && !input1) |
| DRM_DEBUG("First %s output reported failure to sync\n", |
| SDVO_NAME(sdvo_priv)); |
| } |
| |
| intel_sdvo_set_active_outputs(intel_output, sdvo_priv->save_active_outputs); |
| } |
| |
| static int intel_sdvo_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| struct intel_output *intel_output = to_intel_output(connector); |
| struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; |
| |
| if (mode->flags & DRM_MODE_FLAG_DBLSCAN) |
| return MODE_NO_DBLESCAN; |
| |
| if (sdvo_priv->pixel_clock_min > mode->clock) |
| return MODE_CLOCK_LOW; |
| |
| if (sdvo_priv->pixel_clock_max < mode->clock) |
| return MODE_CLOCK_HIGH; |
| |
| return MODE_OK; |
| } |
| |
| static bool intel_sdvo_get_capabilities(struct intel_output *intel_output, struct intel_sdvo_caps *caps) |
| { |
| u8 status; |
| |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_DEVICE_CAPS, NULL, 0); |
| status = intel_sdvo_read_response(intel_output, caps, sizeof(*caps)); |
| if (status != SDVO_CMD_STATUS_SUCCESS) |
| return false; |
| |
| return true; |
| } |
| |
| struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB) |
| { |
| struct drm_connector *connector = NULL; |
| struct intel_output *iout = NULL; |
| struct intel_sdvo_priv *sdvo; |
| |
| /* find the sdvo connector */ |
| list_for_each_entry(connector, &dev->mode_config.connector_list, head) { |
| iout = to_intel_output(connector); |
| |
| if (iout->type != INTEL_OUTPUT_SDVO) |
| continue; |
| |
| sdvo = iout->dev_priv; |
| |
| if (sdvo->output_device == SDVOB && sdvoB) |
| return connector; |
| |
| if (sdvo->output_device == SDVOC && !sdvoB) |
| return connector; |
| |
| } |
| |
| return NULL; |
| } |
| |
| int intel_sdvo_supports_hotplug(struct drm_connector *connector) |
| { |
| u8 response[2]; |
| u8 status; |
| struct intel_output *intel_output; |
| DRM_DEBUG("\n"); |
| |
| if (!connector) |
| return 0; |
| |
| intel_output = to_intel_output(connector); |
| |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0); |
| status = intel_sdvo_read_response(intel_output, &response, 2); |
| |
| if (response[0] !=0) |
| return 1; |
| |
| return 0; |
| } |
| |
| void intel_sdvo_set_hotplug(struct drm_connector *connector, int on) |
| { |
| u8 response[2]; |
| u8 status; |
| struct intel_output *intel_output = to_intel_output(connector); |
| |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0); |
| intel_sdvo_read_response(intel_output, &response, 2); |
| |
| if (on) { |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0); |
| status = intel_sdvo_read_response(intel_output, &response, 2); |
| |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2); |
| } else { |
| response[0] = 0; |
| response[1] = 0; |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2); |
| } |
| |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0); |
| intel_sdvo_read_response(intel_output, &response, 2); |
| } |
| |
| static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector) |
| { |
| u8 response[2]; |
| u8 status; |
| struct intel_output *intel_output = to_intel_output(connector); |
| |
| intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0); |
| status = intel_sdvo_read_response(intel_output, &response, 2); |
| |
| DRM_DEBUG("SDVO response %d %d\n", response[0], response[1]); |
| if ((response[0] != 0) || (response[1] != 0)) |
| return connector_status_connected; |
| else |
| return connector_status_disconnected; |
| } |
| |
| static int intel_sdvo_get_modes(struct drm_connector *connector) |
| { |
| struct intel_output *intel_output = to_intel_output(connector); |
| |
| /* set the bus switch and get the modes */ |
| intel_sdvo_set_control_bus_switch(intel_output, SDVO_CONTROL_BUS_DDC2); |
| intel_ddc_get_modes(intel_output); |
| |
| if (list_empty(&connector->probed_modes)) |
| return 0; |
| return 1; |
| } |
| |
| static void intel_sdvo_destroy(struct drm_connector *connector) |
| { |
| struct intel_output *intel_output = to_intel_output(connector); |
| |
| if (intel_output->i2c_bus) |
| intel_i2c_destroy(intel_output->i2c_bus); |
| drm_sysfs_connector_remove(connector); |
| drm_connector_cleanup(connector); |
| kfree(intel_output); |
| } |
| |
| static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = { |
| .dpms = intel_sdvo_dpms, |
| .mode_fixup = intel_sdvo_mode_fixup, |
| .prepare = intel_encoder_prepare, |
| .mode_set = intel_sdvo_mode_set, |
| .commit = intel_encoder_commit, |
| }; |
| |
| static const struct drm_connector_funcs intel_sdvo_connector_funcs = { |
| .save = intel_sdvo_save, |
| .restore = intel_sdvo_restore, |
| .detect = intel_sdvo_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = intel_sdvo_destroy, |
| }; |
| |
| static const struct drm_connector_helper_funcs intel_sdvo_connector_helper_funcs = { |
| .get_modes = intel_sdvo_get_modes, |
| .mode_valid = intel_sdvo_mode_valid, |
| .best_encoder = intel_best_encoder, |
| }; |
| |
| static void intel_sdvo_enc_destroy(struct drm_encoder *encoder) |
| { |
| drm_encoder_cleanup(encoder); |
| } |
| |
| static const struct drm_encoder_funcs intel_sdvo_enc_funcs = { |
| .destroy = intel_sdvo_enc_destroy, |
| }; |
| |
| |
| void intel_sdvo_init(struct drm_device *dev, int output_device) |
| { |
| struct drm_connector *connector; |
| struct intel_output *intel_output; |
| struct intel_sdvo_priv *sdvo_priv; |
| struct intel_i2c_chan *i2cbus = NULL; |
| int connector_type; |
| u8 ch[0x40]; |
| int i; |
| int encoder_type, output_id; |
| |
| intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL); |
| if (!intel_output) { |
| return; |
| } |
| |
| connector = &intel_output->base; |
| |
| drm_connector_init(dev, connector, &intel_sdvo_connector_funcs, |
| DRM_MODE_CONNECTOR_Unknown); |
| drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs); |
| sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1); |
| intel_output->type = INTEL_OUTPUT_SDVO; |
| |
| connector->interlace_allowed = 0; |
| connector->doublescan_allowed = 0; |
| |
| /* setup the DDC bus. */ |
| if (output_device == SDVOB) |
| i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB"); |
| else |
| i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC"); |
| |
| if (!i2cbus) |
| goto err_connector; |
| |
| sdvo_priv->i2c_bus = i2cbus; |
| |
| if (output_device == SDVOB) { |
| output_id = 1; |
| sdvo_priv->i2c_bus->slave_addr = 0x38; |
| } else { |
| output_id = 2; |
| sdvo_priv->i2c_bus->slave_addr = 0x39; |
| } |
| |
| sdvo_priv->output_device = output_device; |
| intel_output->i2c_bus = i2cbus; |
| intel_output->dev_priv = sdvo_priv; |
| |
| |
| /* Read the regs to test if we can talk to the device */ |
| for (i = 0; i < 0x40; i++) { |
| if (!intel_sdvo_read_byte(intel_output, i, &ch[i])) { |
| DRM_DEBUG("No SDVO device found on SDVO%c\n", |
| output_device == SDVOB ? 'B' : 'C'); |
| goto err_i2c; |
| } |
| } |
| |
| intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps); |
| |
| memset(&sdvo_priv->active_outputs, 0, sizeof(sdvo_priv->active_outputs)); |
| |
| /* TODO, CVBS, SVID, YPRPB & SCART outputs. */ |
| if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0) |
| { |
| sdvo_priv->active_outputs = SDVO_OUTPUT_RGB0; |
| connector->display_info.subpixel_order = SubPixelHorizontalRGB; |
| encoder_type = DRM_MODE_ENCODER_DAC; |
| connector_type = DRM_MODE_CONNECTOR_VGA; |
| } |
| else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1) |
| { |
| sdvo_priv->active_outputs = SDVO_OUTPUT_RGB1; |
| connector->display_info.subpixel_order = SubPixelHorizontalRGB; |
| encoder_type = DRM_MODE_ENCODER_DAC; |
| connector_type = DRM_MODE_CONNECTOR_VGA; |
| } |
| else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0) |
| { |
| sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS0; |
| connector->display_info.subpixel_order = SubPixelHorizontalRGB; |
| encoder_type = DRM_MODE_ENCODER_TMDS; |
| connector_type = DRM_MODE_CONNECTOR_DVID; |
| } |
| else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS1) |
| { |
| sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS1; |
| connector->display_info.subpixel_order = SubPixelHorizontalRGB; |
| encoder_type = DRM_MODE_ENCODER_TMDS; |
| connector_type = DRM_MODE_CONNECTOR_DVID; |
| } |
| else |
| { |
| unsigned char bytes[2]; |
| |
| memcpy (bytes, &sdvo_priv->caps.output_flags, 2); |
| DRM_DEBUG("%s: No active RGB or TMDS outputs (0x%02x%02x)\n", |
| SDVO_NAME(sdvo_priv), |
| bytes[0], bytes[1]); |
| goto err_i2c; |
| } |
| |
| drm_encoder_init(dev, &intel_output->enc, &intel_sdvo_enc_funcs, encoder_type); |
| drm_encoder_helper_add(&intel_output->enc, &intel_sdvo_helper_funcs); |
| connector->connector_type = connector_type; |
| |
| drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); |
| drm_sysfs_connector_add(connector); |
| |
| /* Set the input timing to the screen. Assume always input 0. */ |
| intel_sdvo_set_target_input(intel_output, true, false); |
| |
| intel_sdvo_get_input_pixel_clock_range(intel_output, |
| &sdvo_priv->pixel_clock_min, |
| &sdvo_priv->pixel_clock_max); |
| |
| |
| DRM_DEBUG("%s device VID/DID: %02X:%02X.%02X, " |
| "clock range %dMHz - %dMHz, " |
| "input 1: %c, input 2: %c, " |
| "output 1: %c, output 2: %c\n", |
| SDVO_NAME(sdvo_priv), |
| sdvo_priv->caps.vendor_id, sdvo_priv->caps.device_id, |
| sdvo_priv->caps.device_rev_id, |
| sdvo_priv->pixel_clock_min / 1000, |
| sdvo_priv->pixel_clock_max / 1000, |
| (sdvo_priv->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N', |
| (sdvo_priv->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N', |
| /* check currently supported outputs */ |
| sdvo_priv->caps.output_flags & |
| (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_RGB0) ? 'Y' : 'N', |
| sdvo_priv->caps.output_flags & |
| (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N'); |
| |
| intel_output->ddc_bus = i2cbus; |
| |
| return; |
| |
| err_i2c: |
| intel_i2c_destroy(intel_output->i2c_bus); |
| err_connector: |
| drm_connector_cleanup(connector); |
| kfree(intel_output); |
| |
| return; |
| } |