| /* |
| * ImgTec IR Hardware Decoder found in PowerDown Controller. |
| * |
| * Copyright 2010-2014 Imagination Technologies Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This ties into the input subsystem using the RC-core. Protocol support is |
| * provided in separate modules which provide the parameters and scancode |
| * translation functions to set up the hardware decoder and interpret the |
| * resulting input. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/clk.h> |
| #include <linux/interrupt.h> |
| #include <linux/spinlock.h> |
| #include <linux/timer.h> |
| #include <media/rc-core.h> |
| #include "img-ir.h" |
| |
| /* Decoders lock (only modified to preprocess them) */ |
| static DEFINE_SPINLOCK(img_ir_decoders_lock); |
| |
| static bool img_ir_decoders_preprocessed; |
| static struct img_ir_decoder *img_ir_decoders[] = { |
| #ifdef CONFIG_IR_IMG_NEC |
| &img_ir_nec, |
| #endif |
| #ifdef CONFIG_IR_IMG_JVC |
| &img_ir_jvc, |
| #endif |
| #ifdef CONFIG_IR_IMG_SONY |
| &img_ir_sony, |
| #endif |
| #ifdef CONFIG_IR_IMG_SHARP |
| &img_ir_sharp, |
| #endif |
| #ifdef CONFIG_IR_IMG_SANYO |
| &img_ir_sanyo, |
| #endif |
| NULL |
| }; |
| |
| #define IMG_IR_F_FILTER BIT(RC_FILTER_NORMAL) /* enable filtering */ |
| #define IMG_IR_F_WAKE BIT(RC_FILTER_WAKEUP) /* enable waking */ |
| |
| /* code type quirks */ |
| |
| #define IMG_IR_QUIRK_CODE_BROKEN 0x1 /* Decode is broken */ |
| #define IMG_IR_QUIRK_CODE_LEN_INCR 0x2 /* Bit length needs increment */ |
| |
| /* functions for preprocessing timings, ensuring max is set */ |
| |
| static void img_ir_timing_preprocess(struct img_ir_timing_range *range, |
| unsigned int unit) |
| { |
| if (range->max < range->min) |
| range->max = range->min; |
| if (unit) { |
| /* multiply by unit and convert to microseconds */ |
| range->min = (range->min*unit)/1000; |
| range->max = (range->max*unit + 999)/1000; /* round up */ |
| } |
| } |
| |
| static void img_ir_symbol_timing_preprocess(struct img_ir_symbol_timing *timing, |
| unsigned int unit) |
| { |
| img_ir_timing_preprocess(&timing->pulse, unit); |
| img_ir_timing_preprocess(&timing->space, unit); |
| } |
| |
| static void img_ir_timings_preprocess(struct img_ir_timings *timings, |
| unsigned int unit) |
| { |
| img_ir_symbol_timing_preprocess(&timings->ldr, unit); |
| img_ir_symbol_timing_preprocess(&timings->s00, unit); |
| img_ir_symbol_timing_preprocess(&timings->s01, unit); |
| img_ir_symbol_timing_preprocess(&timings->s10, unit); |
| img_ir_symbol_timing_preprocess(&timings->s11, unit); |
| /* default s10 and s11 to s00 and s01 if no leader */ |
| if (unit) |
| /* multiply by unit and convert to microseconds (round up) */ |
| timings->ft.ft_min = (timings->ft.ft_min*unit + 999)/1000; |
| } |
| |
| /* functions for filling empty fields with defaults */ |
| |
| static void img_ir_timing_defaults(struct img_ir_timing_range *range, |
| struct img_ir_timing_range *defaults) |
| { |
| if (!range->min) |
| range->min = defaults->min; |
| if (!range->max) |
| range->max = defaults->max; |
| } |
| |
| static void img_ir_symbol_timing_defaults(struct img_ir_symbol_timing *timing, |
| struct img_ir_symbol_timing *defaults) |
| { |
| img_ir_timing_defaults(&timing->pulse, &defaults->pulse); |
| img_ir_timing_defaults(&timing->space, &defaults->space); |
| } |
| |
| static void img_ir_timings_defaults(struct img_ir_timings *timings, |
| struct img_ir_timings *defaults) |
| { |
| img_ir_symbol_timing_defaults(&timings->ldr, &defaults->ldr); |
| img_ir_symbol_timing_defaults(&timings->s00, &defaults->s00); |
| img_ir_symbol_timing_defaults(&timings->s01, &defaults->s01); |
| img_ir_symbol_timing_defaults(&timings->s10, &defaults->s10); |
| img_ir_symbol_timing_defaults(&timings->s11, &defaults->s11); |
| if (!timings->ft.ft_min) |
| timings->ft.ft_min = defaults->ft.ft_min; |
| } |
| |
| /* functions for converting timings to register values */ |
| |
| /** |
| * img_ir_control() - Convert control struct to control register value. |
| * @control: Control data |
| * |
| * Returns: The control register value equivalent of @control. |
| */ |
| static u32 img_ir_control(const struct img_ir_control *control) |
| { |
| u32 ctrl = control->code_type << IMG_IR_CODETYPE_SHIFT; |
| if (control->decoden) |
| ctrl |= IMG_IR_DECODEN; |
| if (control->hdrtog) |
| ctrl |= IMG_IR_HDRTOG; |
| if (control->ldrdec) |
| ctrl |= IMG_IR_LDRDEC; |
| if (control->decodinpol) |
| ctrl |= IMG_IR_DECODINPOL; |
| if (control->bitorien) |
| ctrl |= IMG_IR_BITORIEN; |
| if (control->d1validsel) |
| ctrl |= IMG_IR_D1VALIDSEL; |
| if (control->bitinv) |
| ctrl |= IMG_IR_BITINV; |
| if (control->decodend2) |
| ctrl |= IMG_IR_DECODEND2; |
| if (control->bitoriend2) |
| ctrl |= IMG_IR_BITORIEND2; |
| if (control->bitinvd2) |
| ctrl |= IMG_IR_BITINVD2; |
| return ctrl; |
| } |
| |
| /** |
| * img_ir_timing_range_convert() - Convert microsecond range. |
| * @out: Output timing range in clock cycles with a shift. |
| * @in: Input timing range in microseconds. |
| * @tolerance: Tolerance as a fraction of 128 (roughly percent). |
| * @clock_hz: IR clock rate in Hz. |
| * @shift: Shift of output units. |
| * |
| * Converts min and max from microseconds to IR clock cycles, applies a |
| * tolerance, and shifts for the register, rounding in the right direction. |
| * Note that in and out can safely be the same object. |
| */ |
| static void img_ir_timing_range_convert(struct img_ir_timing_range *out, |
| const struct img_ir_timing_range *in, |
| unsigned int tolerance, |
| unsigned long clock_hz, |
| unsigned int shift) |
| { |
| unsigned int min = in->min; |
| unsigned int max = in->max; |
| /* add a tolerance */ |
| min = min - (min*tolerance >> 7); |
| max = max + (max*tolerance >> 7); |
| /* convert from microseconds into clock cycles */ |
| min = min*clock_hz / 1000000; |
| max = (max*clock_hz + 999999) / 1000000; /* round up */ |
| /* apply shift and copy to output */ |
| out->min = min >> shift; |
| out->max = (max + ((1 << shift) - 1)) >> shift; /* round up */ |
| } |
| |
| /** |
| * img_ir_symbol_timing() - Convert symbol timing struct to register value. |
| * @timing: Symbol timing data |
| * @tolerance: Timing tolerance where 0-128 represents 0-100% |
| * @clock_hz: Frequency of source clock in Hz |
| * @pd_shift: Shift to apply to symbol period |
| * @w_shift: Shift to apply to symbol width |
| * |
| * Returns: Symbol timing register value based on arguments. |
| */ |
| static u32 img_ir_symbol_timing(const struct img_ir_symbol_timing *timing, |
| unsigned int tolerance, |
| unsigned long clock_hz, |
| unsigned int pd_shift, |
| unsigned int w_shift) |
| { |
| struct img_ir_timing_range hw_pulse, hw_period; |
| /* we calculate period in hw_period, then convert in place */ |
| hw_period.min = timing->pulse.min + timing->space.min; |
| hw_period.max = timing->pulse.max + timing->space.max; |
| img_ir_timing_range_convert(&hw_period, &hw_period, |
| tolerance, clock_hz, pd_shift); |
| img_ir_timing_range_convert(&hw_pulse, &timing->pulse, |
| tolerance, clock_hz, w_shift); |
| /* construct register value */ |
| return (hw_period.max << IMG_IR_PD_MAX_SHIFT) | |
| (hw_period.min << IMG_IR_PD_MIN_SHIFT) | |
| (hw_pulse.max << IMG_IR_W_MAX_SHIFT) | |
| (hw_pulse.min << IMG_IR_W_MIN_SHIFT); |
| } |
| |
| /** |
| * img_ir_free_timing() - Convert free time timing struct to register value. |
| * @timing: Free symbol timing data |
| * @clock_hz: Source clock frequency in Hz |
| * |
| * Returns: Free symbol timing register value. |
| */ |
| static u32 img_ir_free_timing(const struct img_ir_free_timing *timing, |
| unsigned long clock_hz) |
| { |
| unsigned int minlen, maxlen, ft_min; |
| /* minlen is only 5 bits, and round minlen to multiple of 2 */ |
| if (timing->minlen < 30) |
| minlen = timing->minlen & -2; |
| else |
| minlen = 30; |
| /* maxlen has maximum value of 48, and round maxlen to multiple of 2 */ |
| if (timing->maxlen < 48) |
| maxlen = (timing->maxlen + 1) & -2; |
| else |
| maxlen = 48; |
| /* convert and shift ft_min, rounding upwards */ |
| ft_min = (timing->ft_min*clock_hz + 999999) / 1000000; |
| ft_min = (ft_min + 7) >> 3; |
| /* construct register value */ |
| return (maxlen << IMG_IR_MAXLEN_SHIFT) | |
| (minlen << IMG_IR_MINLEN_SHIFT) | |
| (ft_min << IMG_IR_FT_MIN_SHIFT); |
| } |
| |
| /** |
| * img_ir_free_timing_dynamic() - Update free time register value. |
| * @st_ft: Static free time register value from img_ir_free_timing. |
| * @filter: Current filter which may additionally restrict min/max len. |
| * |
| * Returns: Updated free time register value based on the current filter. |
| */ |
| static u32 img_ir_free_timing_dynamic(u32 st_ft, struct img_ir_filter *filter) |
| { |
| unsigned int minlen, maxlen, newminlen, newmaxlen; |
| |
| /* round minlen, maxlen to multiple of 2 */ |
| newminlen = filter->minlen & -2; |
| newmaxlen = (filter->maxlen + 1) & -2; |
| /* extract min/max len from register */ |
| minlen = (st_ft & IMG_IR_MINLEN) >> IMG_IR_MINLEN_SHIFT; |
| maxlen = (st_ft & IMG_IR_MAXLEN) >> IMG_IR_MAXLEN_SHIFT; |
| /* if the new values are more restrictive, update the register value */ |
| if (newminlen > minlen) { |
| st_ft &= ~IMG_IR_MINLEN; |
| st_ft |= newminlen << IMG_IR_MINLEN_SHIFT; |
| } |
| if (newmaxlen < maxlen) { |
| st_ft &= ~IMG_IR_MAXLEN; |
| st_ft |= newmaxlen << IMG_IR_MAXLEN_SHIFT; |
| } |
| return st_ft; |
| } |
| |
| /** |
| * img_ir_timings_convert() - Convert timings to register values |
| * @regs: Output timing register values |
| * @timings: Input timing data |
| * @tolerance: Timing tolerance where 0-128 represents 0-100% |
| * @clock_hz: Source clock frequency in Hz |
| */ |
| static void img_ir_timings_convert(struct img_ir_timing_regvals *regs, |
| const struct img_ir_timings *timings, |
| unsigned int tolerance, |
| unsigned int clock_hz) |
| { |
| /* leader symbol timings are divided by 16 */ |
| regs->ldr = img_ir_symbol_timing(&timings->ldr, tolerance, clock_hz, |
| 4, 4); |
| /* other symbol timings, pd fields only are divided by 2 */ |
| regs->s00 = img_ir_symbol_timing(&timings->s00, tolerance, clock_hz, |
| 1, 0); |
| regs->s01 = img_ir_symbol_timing(&timings->s01, tolerance, clock_hz, |
| 1, 0); |
| regs->s10 = img_ir_symbol_timing(&timings->s10, tolerance, clock_hz, |
| 1, 0); |
| regs->s11 = img_ir_symbol_timing(&timings->s11, tolerance, clock_hz, |
| 1, 0); |
| regs->ft = img_ir_free_timing(&timings->ft, clock_hz); |
| } |
| |
| /** |
| * img_ir_decoder_preprocess() - Preprocess timings in decoder. |
| * @decoder: Decoder to be preprocessed. |
| * |
| * Ensures that the symbol timing ranges are valid with respect to ordering, and |
| * does some fixed conversion on them. |
| */ |
| static void img_ir_decoder_preprocess(struct img_ir_decoder *decoder) |
| { |
| /* default tolerance */ |
| if (!decoder->tolerance) |
| decoder->tolerance = 10; /* percent */ |
| /* and convert tolerance to fraction out of 128 */ |
| decoder->tolerance = decoder->tolerance * 128 / 100; |
| |
| /* fill in implicit fields */ |
| img_ir_timings_preprocess(&decoder->timings, decoder->unit); |
| |
| /* do the same for repeat timings if applicable */ |
| if (decoder->repeat) { |
| img_ir_timings_preprocess(&decoder->rtimings, decoder->unit); |
| img_ir_timings_defaults(&decoder->rtimings, &decoder->timings); |
| } |
| } |
| |
| /** |
| * img_ir_decoder_convert() - Generate internal timings in decoder. |
| * @decoder: Decoder to be converted to internal timings. |
| * @timings: Timing register values. |
| * @clock_hz: IR clock rate in Hz. |
| * |
| * Fills out the repeat timings and timing register values for a specific clock |
| * rate. |
| */ |
| static void img_ir_decoder_convert(const struct img_ir_decoder *decoder, |
| struct img_ir_reg_timings *reg_timings, |
| unsigned int clock_hz) |
| { |
| /* calculate control value */ |
| reg_timings->ctrl = img_ir_control(&decoder->control); |
| |
| /* fill in implicit fields and calculate register values */ |
| img_ir_timings_convert(®_timings->timings, &decoder->timings, |
| decoder->tolerance, clock_hz); |
| |
| /* do the same for repeat timings if applicable */ |
| if (decoder->repeat) |
| img_ir_timings_convert(®_timings->rtimings, |
| &decoder->rtimings, decoder->tolerance, |
| clock_hz); |
| } |
| |
| /** |
| * img_ir_write_timings() - Write timings to the hardware now |
| * @priv: IR private data |
| * @regs: Timing register values to write |
| * @type: RC filter type (RC_FILTER_*) |
| * |
| * Write timing register values @regs to the hardware, taking into account the |
| * current filter which may impose restrictions on the length of the expected |
| * data. |
| */ |
| static void img_ir_write_timings(struct img_ir_priv *priv, |
| struct img_ir_timing_regvals *regs, |
| enum rc_filter_type type) |
| { |
| struct img_ir_priv_hw *hw = &priv->hw; |
| |
| /* filter may be more restrictive to minlen, maxlen */ |
| u32 ft = regs->ft; |
| if (hw->flags & BIT(type)) |
| ft = img_ir_free_timing_dynamic(regs->ft, &hw->filters[type]); |
| /* write to registers */ |
| img_ir_write(priv, IMG_IR_LEAD_SYMB_TIMING, regs->ldr); |
| img_ir_write(priv, IMG_IR_S00_SYMB_TIMING, regs->s00); |
| img_ir_write(priv, IMG_IR_S01_SYMB_TIMING, regs->s01); |
| img_ir_write(priv, IMG_IR_S10_SYMB_TIMING, regs->s10); |
| img_ir_write(priv, IMG_IR_S11_SYMB_TIMING, regs->s11); |
| img_ir_write(priv, IMG_IR_FREE_SYMB_TIMING, ft); |
| dev_dbg(priv->dev, "timings: ldr=%#x, s=[%#x, %#x, %#x, %#x], ft=%#x\n", |
| regs->ldr, regs->s00, regs->s01, regs->s10, regs->s11, ft); |
| } |
| |
| static void img_ir_write_filter(struct img_ir_priv *priv, |
| struct img_ir_filter *filter) |
| { |
| if (filter) { |
| dev_dbg(priv->dev, "IR filter=%016llx & %016llx\n", |
| (unsigned long long)filter->data, |
| (unsigned long long)filter->mask); |
| img_ir_write(priv, IMG_IR_IRQ_MSG_DATA_LW, (u32)filter->data); |
| img_ir_write(priv, IMG_IR_IRQ_MSG_DATA_UP, (u32)(filter->data |
| >> 32)); |
| img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_LW, (u32)filter->mask); |
| img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_UP, (u32)(filter->mask |
| >> 32)); |
| } else { |
| dev_dbg(priv->dev, "IR clearing filter\n"); |
| img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_LW, 0); |
| img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_UP, 0); |
| } |
| } |
| |
| /* caller must have lock */ |
| static void _img_ir_set_filter(struct img_ir_priv *priv, |
| struct img_ir_filter *filter) |
| { |
| struct img_ir_priv_hw *hw = &priv->hw; |
| u32 irq_en, irq_on; |
| |
| irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE); |
| if (filter) { |
| /* Only use the match interrupt */ |
| hw->filters[RC_FILTER_NORMAL] = *filter; |
| hw->flags |= IMG_IR_F_FILTER; |
| irq_on = IMG_IR_IRQ_DATA_MATCH; |
| irq_en &= ~(IMG_IR_IRQ_DATA_VALID | IMG_IR_IRQ_DATA2_VALID); |
| } else { |
| /* Only use the valid interrupt */ |
| hw->flags &= ~IMG_IR_F_FILTER; |
| irq_en &= ~IMG_IR_IRQ_DATA_MATCH; |
| irq_on = IMG_IR_IRQ_DATA_VALID | IMG_IR_IRQ_DATA2_VALID; |
| } |
| irq_en |= irq_on; |
| |
| img_ir_write_filter(priv, filter); |
| /* clear any interrupts we're enabling so we don't handle old ones */ |
| img_ir_write(priv, IMG_IR_IRQ_CLEAR, irq_on); |
| img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en); |
| } |
| |
| /* caller must have lock */ |
| static void _img_ir_set_wake_filter(struct img_ir_priv *priv, |
| struct img_ir_filter *filter) |
| { |
| struct img_ir_priv_hw *hw = &priv->hw; |
| if (filter) { |
| /* Enable wake, and copy filter for later */ |
| hw->filters[RC_FILTER_WAKEUP] = *filter; |
| hw->flags |= IMG_IR_F_WAKE; |
| } else { |
| /* Disable wake */ |
| hw->flags &= ~IMG_IR_F_WAKE; |
| } |
| } |
| |
| /* Callback for setting scancode filter */ |
| static int img_ir_set_filter(struct rc_dev *dev, enum rc_filter_type type, |
| struct rc_scancode_filter *sc_filter) |
| { |
| struct img_ir_priv *priv = dev->priv; |
| struct img_ir_priv_hw *hw = &priv->hw; |
| struct img_ir_filter filter, *filter_ptr = &filter; |
| int ret = 0; |
| |
| dev_dbg(priv->dev, "IR scancode %sfilter=%08x & %08x\n", |
| type == RC_FILTER_WAKEUP ? "wake " : "", |
| sc_filter->data, |
| sc_filter->mask); |
| |
| spin_lock_irq(&priv->lock); |
| |
| /* filtering can always be disabled */ |
| if (!sc_filter->mask) { |
| filter_ptr = NULL; |
| goto set_unlock; |
| } |
| |
| /* current decoder must support scancode filtering */ |
| if (!hw->decoder || !hw->decoder->filter) { |
| ret = -EINVAL; |
| goto unlock; |
| } |
| |
| /* convert scancode filter to raw filter */ |
| filter.minlen = 0; |
| filter.maxlen = ~0; |
| ret = hw->decoder->filter(sc_filter, &filter, hw->enabled_protocols); |
| if (ret) |
| goto unlock; |
| dev_dbg(priv->dev, "IR raw %sfilter=%016llx & %016llx\n", |
| type == RC_FILTER_WAKEUP ? "wake " : "", |
| (unsigned long long)filter.data, |
| (unsigned long long)filter.mask); |
| |
| set_unlock: |
| /* apply raw filters */ |
| switch (type) { |
| case RC_FILTER_NORMAL: |
| _img_ir_set_filter(priv, filter_ptr); |
| break; |
| case RC_FILTER_WAKEUP: |
| _img_ir_set_wake_filter(priv, filter_ptr); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| unlock: |
| spin_unlock_irq(&priv->lock); |
| return ret; |
| } |
| |
| static int img_ir_set_normal_filter(struct rc_dev *dev, |
| struct rc_scancode_filter *sc_filter) |
| { |
| return img_ir_set_filter(dev, RC_FILTER_NORMAL, sc_filter); |
| } |
| |
| static int img_ir_set_wakeup_filter(struct rc_dev *dev, |
| struct rc_scancode_filter *sc_filter) |
| { |
| return img_ir_set_filter(dev, RC_FILTER_WAKEUP, sc_filter); |
| } |
| |
| /** |
| * img_ir_set_decoder() - Set the current decoder. |
| * @priv: IR private data. |
| * @decoder: Decoder to use with immediate effect. |
| * @proto: Protocol bitmap (or 0 to use decoder->type). |
| */ |
| static void img_ir_set_decoder(struct img_ir_priv *priv, |
| const struct img_ir_decoder *decoder, |
| u64 proto) |
| { |
| struct img_ir_priv_hw *hw = &priv->hw; |
| struct rc_dev *rdev = hw->rdev; |
| u32 ir_status, irq_en; |
| spin_lock_irq(&priv->lock); |
| |
| /* switch off and disable interrupts */ |
| img_ir_write(priv, IMG_IR_CONTROL, 0); |
| irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE); |
| img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en & IMG_IR_IRQ_EDGE); |
| img_ir_write(priv, IMG_IR_IRQ_CLEAR, IMG_IR_IRQ_ALL & ~IMG_IR_IRQ_EDGE); |
| |
| /* ack any data already detected */ |
| ir_status = img_ir_read(priv, IMG_IR_STATUS); |
| if (ir_status & (IMG_IR_RXDVAL | IMG_IR_RXDVALD2)) { |
| ir_status &= ~(IMG_IR_RXDVAL | IMG_IR_RXDVALD2); |
| img_ir_write(priv, IMG_IR_STATUS, ir_status); |
| img_ir_read(priv, IMG_IR_DATA_LW); |
| img_ir_read(priv, IMG_IR_DATA_UP); |
| } |
| |
| /* stop the end timer and switch back to normal mode */ |
| del_timer_sync(&hw->end_timer); |
| hw->mode = IMG_IR_M_NORMAL; |
| |
| /* clear the wakeup scancode filter */ |
| rdev->scancode_wakeup_filter.data = 0; |
| rdev->scancode_wakeup_filter.mask = 0; |
| |
| /* clear raw filters */ |
| _img_ir_set_filter(priv, NULL); |
| _img_ir_set_wake_filter(priv, NULL); |
| |
| /* clear the enabled protocols */ |
| hw->enabled_protocols = 0; |
| |
| /* switch decoder */ |
| hw->decoder = decoder; |
| if (!decoder) |
| goto unlock; |
| |
| /* set the enabled protocols */ |
| if (!proto) |
| proto = decoder->type; |
| hw->enabled_protocols = proto; |
| |
| /* write the new timings */ |
| img_ir_decoder_convert(decoder, &hw->reg_timings, hw->clk_hz); |
| img_ir_write_timings(priv, &hw->reg_timings.timings, RC_FILTER_NORMAL); |
| |
| /* set up and enable */ |
| img_ir_write(priv, IMG_IR_CONTROL, hw->reg_timings.ctrl); |
| |
| |
| unlock: |
| spin_unlock_irq(&priv->lock); |
| } |
| |
| /** |
| * img_ir_decoder_compatable() - Find whether a decoder will work with a device. |
| * @priv: IR private data. |
| * @dec: Decoder to check. |
| * |
| * Returns: true if @dec is compatible with the device @priv refers to. |
| */ |
| static bool img_ir_decoder_compatible(struct img_ir_priv *priv, |
| const struct img_ir_decoder *dec) |
| { |
| unsigned int ct; |
| |
| /* don't accept decoders using code types which aren't supported */ |
| ct = dec->control.code_type; |
| if (priv->hw.ct_quirks[ct] & IMG_IR_QUIRK_CODE_BROKEN) |
| return false; |
| |
| return true; |
| } |
| |
| /** |
| * img_ir_allowed_protos() - Get allowed protocols from global decoder list. |
| * @priv: IR private data. |
| * |
| * Returns: Mask of protocols supported by the device @priv refers to. |
| */ |
| static u64 img_ir_allowed_protos(struct img_ir_priv *priv) |
| { |
| u64 protos = 0; |
| struct img_ir_decoder **decp; |
| |
| for (decp = img_ir_decoders; *decp; ++decp) { |
| const struct img_ir_decoder *dec = *decp; |
| if (img_ir_decoder_compatible(priv, dec)) |
| protos |= dec->type; |
| } |
| return protos; |
| } |
| |
| /* Callback for changing protocol using sysfs */ |
| static int img_ir_change_protocol(struct rc_dev *dev, u64 *ir_type) |
| { |
| struct img_ir_priv *priv = dev->priv; |
| struct img_ir_priv_hw *hw = &priv->hw; |
| struct rc_dev *rdev = hw->rdev; |
| struct img_ir_decoder **decp; |
| u64 wakeup_protocols; |
| |
| if (!*ir_type) { |
| /* disable all protocols */ |
| img_ir_set_decoder(priv, NULL, 0); |
| goto success; |
| } |
| for (decp = img_ir_decoders; *decp; ++decp) { |
| const struct img_ir_decoder *dec = *decp; |
| if (!img_ir_decoder_compatible(priv, dec)) |
| continue; |
| if (*ir_type & dec->type) { |
| *ir_type &= dec->type; |
| img_ir_set_decoder(priv, dec, *ir_type); |
| goto success; |
| } |
| } |
| return -EINVAL; |
| |
| success: |
| /* |
| * Only allow matching wakeup protocols for now, and only if filtering |
| * is supported. |
| */ |
| wakeup_protocols = *ir_type; |
| if (!hw->decoder || !hw->decoder->filter) |
| wakeup_protocols = 0; |
| rdev->allowed_wakeup_protocols = wakeup_protocols; |
| rdev->enabled_wakeup_protocols = wakeup_protocols; |
| return 0; |
| } |
| |
| /* Changes ir-core protocol device attribute */ |
| static void img_ir_set_protocol(struct img_ir_priv *priv, u64 proto) |
| { |
| struct rc_dev *rdev = priv->hw.rdev; |
| |
| spin_lock_irq(&rdev->rc_map.lock); |
| rdev->rc_map.rc_type = __ffs64(proto); |
| spin_unlock_irq(&rdev->rc_map.lock); |
| |
| mutex_lock(&rdev->lock); |
| rdev->enabled_protocols = proto; |
| rdev->allowed_wakeup_protocols = proto; |
| rdev->enabled_wakeup_protocols = proto; |
| mutex_unlock(&rdev->lock); |
| } |
| |
| /* Set up IR decoders */ |
| static void img_ir_init_decoders(void) |
| { |
| struct img_ir_decoder **decp; |
| |
| spin_lock(&img_ir_decoders_lock); |
| if (!img_ir_decoders_preprocessed) { |
| for (decp = img_ir_decoders; *decp; ++decp) |
| img_ir_decoder_preprocess(*decp); |
| img_ir_decoders_preprocessed = true; |
| } |
| spin_unlock(&img_ir_decoders_lock); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| /** |
| * img_ir_enable_wake() - Switch to wake mode. |
| * @priv: IR private data. |
| * |
| * Returns: non-zero if the IR can wake the system. |
| */ |
| static int img_ir_enable_wake(struct img_ir_priv *priv) |
| { |
| struct img_ir_priv_hw *hw = &priv->hw; |
| int ret = 0; |
| |
| spin_lock_irq(&priv->lock); |
| if (hw->flags & IMG_IR_F_WAKE) { |
| /* interrupt only on a match */ |
| hw->suspend_irqen = img_ir_read(priv, IMG_IR_IRQ_ENABLE); |
| img_ir_write(priv, IMG_IR_IRQ_ENABLE, IMG_IR_IRQ_DATA_MATCH); |
| img_ir_write_filter(priv, &hw->filters[RC_FILTER_WAKEUP]); |
| img_ir_write_timings(priv, &hw->reg_timings.timings, |
| RC_FILTER_WAKEUP); |
| hw->mode = IMG_IR_M_WAKE; |
| ret = 1; |
| } |
| spin_unlock_irq(&priv->lock); |
| return ret; |
| } |
| |
| /** |
| * img_ir_disable_wake() - Switch out of wake mode. |
| * @priv: IR private data |
| * |
| * Returns: 1 if the hardware should be allowed to wake from a sleep state. |
| * 0 otherwise. |
| */ |
| static int img_ir_disable_wake(struct img_ir_priv *priv) |
| { |
| struct img_ir_priv_hw *hw = &priv->hw; |
| int ret = 0; |
| |
| spin_lock_irq(&priv->lock); |
| if (hw->flags & IMG_IR_F_WAKE) { |
| /* restore normal filtering */ |
| if (hw->flags & IMG_IR_F_FILTER) { |
| img_ir_write(priv, IMG_IR_IRQ_ENABLE, |
| (hw->suspend_irqen & IMG_IR_IRQ_EDGE) | |
| IMG_IR_IRQ_DATA_MATCH); |
| img_ir_write_filter(priv, |
| &hw->filters[RC_FILTER_NORMAL]); |
| } else { |
| img_ir_write(priv, IMG_IR_IRQ_ENABLE, |
| (hw->suspend_irqen & IMG_IR_IRQ_EDGE) | |
| IMG_IR_IRQ_DATA_VALID | |
| IMG_IR_IRQ_DATA2_VALID); |
| img_ir_write_filter(priv, NULL); |
| } |
| img_ir_write_timings(priv, &hw->reg_timings.timings, |
| RC_FILTER_NORMAL); |
| hw->mode = IMG_IR_M_NORMAL; |
| ret = 1; |
| } |
| spin_unlock_irq(&priv->lock); |
| return ret; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| /* lock must be held */ |
| static void img_ir_begin_repeat(struct img_ir_priv *priv) |
| { |
| struct img_ir_priv_hw *hw = &priv->hw; |
| if (hw->mode == IMG_IR_M_NORMAL) { |
| /* switch to repeat timings */ |
| img_ir_write(priv, IMG_IR_CONTROL, 0); |
| hw->mode = IMG_IR_M_REPEATING; |
| img_ir_write_timings(priv, &hw->reg_timings.rtimings, |
| RC_FILTER_NORMAL); |
| img_ir_write(priv, IMG_IR_CONTROL, hw->reg_timings.ctrl); |
| } |
| } |
| |
| /* lock must be held */ |
| static void img_ir_end_repeat(struct img_ir_priv *priv) |
| { |
| struct img_ir_priv_hw *hw = &priv->hw; |
| if (hw->mode == IMG_IR_M_REPEATING) { |
| /* switch to normal timings */ |
| img_ir_write(priv, IMG_IR_CONTROL, 0); |
| hw->mode = IMG_IR_M_NORMAL; |
| img_ir_write_timings(priv, &hw->reg_timings.timings, |
| RC_FILTER_NORMAL); |
| img_ir_write(priv, IMG_IR_CONTROL, hw->reg_timings.ctrl); |
| } |
| } |
| |
| /* lock must be held */ |
| static void img_ir_handle_data(struct img_ir_priv *priv, u32 len, u64 raw) |
| { |
| struct img_ir_priv_hw *hw = &priv->hw; |
| const struct img_ir_decoder *dec = hw->decoder; |
| int ret = IMG_IR_SCANCODE; |
| u32 scancode; |
| enum rc_type protocol = RC_TYPE_UNKNOWN; |
| |
| if (dec->scancode) |
| ret = dec->scancode(len, raw, &protocol, &scancode, hw->enabled_protocols); |
| else if (len >= 32) |
| scancode = (u32)raw; |
| else if (len < 32) |
| scancode = (u32)raw & ((1 << len)-1); |
| dev_dbg(priv->dev, "data (%u bits) = %#llx\n", |
| len, (unsigned long long)raw); |
| if (ret == IMG_IR_SCANCODE) { |
| dev_dbg(priv->dev, "decoded scan code %#x\n", scancode); |
| rc_keydown(hw->rdev, protocol, scancode, 0); |
| img_ir_end_repeat(priv); |
| } else if (ret == IMG_IR_REPEATCODE) { |
| if (hw->mode == IMG_IR_M_REPEATING) { |
| dev_dbg(priv->dev, "decoded repeat code\n"); |
| rc_repeat(hw->rdev); |
| } else { |
| dev_dbg(priv->dev, "decoded unexpected repeat code, ignoring\n"); |
| } |
| } else { |
| dev_dbg(priv->dev, "decode failed (%d)\n", ret); |
| return; |
| } |
| |
| |
| if (dec->repeat) { |
| unsigned long interval; |
| |
| img_ir_begin_repeat(priv); |
| |
| /* update timer, but allowing for 1/8th tolerance */ |
| interval = dec->repeat + (dec->repeat >> 3); |
| mod_timer(&hw->end_timer, |
| jiffies + msecs_to_jiffies(interval)); |
| } |
| } |
| |
| /* timer function to end waiting for repeat. */ |
| static void img_ir_end_timer(unsigned long arg) |
| { |
| struct img_ir_priv *priv = (struct img_ir_priv *)arg; |
| |
| spin_lock_irq(&priv->lock); |
| img_ir_end_repeat(priv); |
| spin_unlock_irq(&priv->lock); |
| } |
| |
| #ifdef CONFIG_COMMON_CLK |
| static void img_ir_change_frequency(struct img_ir_priv *priv, |
| struct clk_notifier_data *change) |
| { |
| struct img_ir_priv_hw *hw = &priv->hw; |
| |
| dev_dbg(priv->dev, "clk changed %lu HZ -> %lu HZ\n", |
| change->old_rate, change->new_rate); |
| |
| spin_lock_irq(&priv->lock); |
| if (hw->clk_hz == change->new_rate) |
| goto unlock; |
| hw->clk_hz = change->new_rate; |
| /* refresh current timings */ |
| if (hw->decoder) { |
| img_ir_decoder_convert(hw->decoder, &hw->reg_timings, |
| hw->clk_hz); |
| switch (hw->mode) { |
| case IMG_IR_M_NORMAL: |
| img_ir_write_timings(priv, &hw->reg_timings.timings, |
| RC_FILTER_NORMAL); |
| break; |
| case IMG_IR_M_REPEATING: |
| img_ir_write_timings(priv, &hw->reg_timings.rtimings, |
| RC_FILTER_NORMAL); |
| break; |
| #ifdef CONFIG_PM_SLEEP |
| case IMG_IR_M_WAKE: |
| img_ir_write_timings(priv, &hw->reg_timings.timings, |
| RC_FILTER_WAKEUP); |
| break; |
| #endif |
| } |
| } |
| unlock: |
| spin_unlock_irq(&priv->lock); |
| } |
| |
| static int img_ir_clk_notify(struct notifier_block *self, unsigned long action, |
| void *data) |
| { |
| struct img_ir_priv *priv = container_of(self, struct img_ir_priv, |
| hw.clk_nb); |
| switch (action) { |
| case POST_RATE_CHANGE: |
| img_ir_change_frequency(priv, data); |
| break; |
| default: |
| break; |
| } |
| return NOTIFY_OK; |
| } |
| #endif /* CONFIG_COMMON_CLK */ |
| |
| /* called with priv->lock held */ |
| void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status) |
| { |
| struct img_ir_priv_hw *hw = &priv->hw; |
| u32 ir_status, len, lw, up; |
| unsigned int ct; |
| |
| /* use the current decoder */ |
| if (!hw->decoder) |
| return; |
| |
| ir_status = img_ir_read(priv, IMG_IR_STATUS); |
| if (!(ir_status & (IMG_IR_RXDVAL | IMG_IR_RXDVALD2))) |
| return; |
| ir_status &= ~(IMG_IR_RXDVAL | IMG_IR_RXDVALD2); |
| img_ir_write(priv, IMG_IR_STATUS, ir_status); |
| |
| len = (ir_status & IMG_IR_RXDLEN) >> IMG_IR_RXDLEN_SHIFT; |
| /* some versions report wrong length for certain code types */ |
| ct = hw->decoder->control.code_type; |
| if (hw->ct_quirks[ct] & IMG_IR_QUIRK_CODE_LEN_INCR) |
| ++len; |
| |
| lw = img_ir_read(priv, IMG_IR_DATA_LW); |
| up = img_ir_read(priv, IMG_IR_DATA_UP); |
| img_ir_handle_data(priv, len, (u64)up << 32 | lw); |
| } |
| |
| void img_ir_setup_hw(struct img_ir_priv *priv) |
| { |
| struct img_ir_decoder **decp; |
| |
| if (!priv->hw.rdev) |
| return; |
| |
| /* Use the first available decoder (or disable stuff if NULL) */ |
| for (decp = img_ir_decoders; *decp; ++decp) { |
| const struct img_ir_decoder *dec = *decp; |
| if (img_ir_decoder_compatible(priv, dec)) { |
| img_ir_set_protocol(priv, dec->type); |
| img_ir_set_decoder(priv, dec, 0); |
| return; |
| } |
| } |
| img_ir_set_decoder(priv, NULL, 0); |
| } |
| |
| /** |
| * img_ir_probe_hw_caps() - Probe capabilities of the hardware. |
| * @priv: IR private data. |
| */ |
| static void img_ir_probe_hw_caps(struct img_ir_priv *priv) |
| { |
| struct img_ir_priv_hw *hw = &priv->hw; |
| /* |
| * When a version of the block becomes available without these quirks, |
| * they'll have to depend on the core revision. |
| */ |
| hw->ct_quirks[IMG_IR_CODETYPE_PULSELEN] |
| |= IMG_IR_QUIRK_CODE_LEN_INCR; |
| hw->ct_quirks[IMG_IR_CODETYPE_BIPHASE] |
| |= IMG_IR_QUIRK_CODE_BROKEN; |
| hw->ct_quirks[IMG_IR_CODETYPE_2BITPULSEPOS] |
| |= IMG_IR_QUIRK_CODE_BROKEN; |
| } |
| |
| int img_ir_probe_hw(struct img_ir_priv *priv) |
| { |
| struct img_ir_priv_hw *hw = &priv->hw; |
| struct rc_dev *rdev; |
| int error; |
| |
| /* Ensure hardware decoders have been preprocessed */ |
| img_ir_init_decoders(); |
| |
| /* Probe hardware capabilities */ |
| img_ir_probe_hw_caps(priv); |
| |
| /* Set up the end timer */ |
| setup_timer(&hw->end_timer, img_ir_end_timer, (unsigned long)priv); |
| |
| /* Register a clock notifier */ |
| if (!IS_ERR(priv->clk)) { |
| hw->clk_hz = clk_get_rate(priv->clk); |
| #ifdef CONFIG_COMMON_CLK |
| hw->clk_nb.notifier_call = img_ir_clk_notify; |
| error = clk_notifier_register(priv->clk, &hw->clk_nb); |
| if (error) |
| dev_warn(priv->dev, |
| "failed to register clock notifier\n"); |
| #endif |
| } else { |
| hw->clk_hz = 32768; |
| } |
| |
| /* Allocate hardware decoder */ |
| hw->rdev = rdev = rc_allocate_device(); |
| if (!rdev) { |
| dev_err(priv->dev, "cannot allocate input device\n"); |
| error = -ENOMEM; |
| goto err_alloc_rc; |
| } |
| rdev->priv = priv; |
| rdev->map_name = RC_MAP_EMPTY; |
| rdev->allowed_protocols = img_ir_allowed_protos(priv); |
| rdev->input_name = "IMG Infrared Decoder"; |
| rdev->s_filter = img_ir_set_normal_filter; |
| rdev->s_wakeup_filter = img_ir_set_wakeup_filter; |
| |
| /* Register hardware decoder */ |
| error = rc_register_device(rdev); |
| if (error) { |
| dev_err(priv->dev, "failed to register IR input device\n"); |
| goto err_register_rc; |
| } |
| |
| /* |
| * Set this after rc_register_device as no protocols have been |
| * registered yet. |
| */ |
| rdev->change_protocol = img_ir_change_protocol; |
| |
| device_init_wakeup(priv->dev, 1); |
| |
| return 0; |
| |
| err_register_rc: |
| img_ir_set_decoder(priv, NULL, 0); |
| hw->rdev = NULL; |
| rc_free_device(rdev); |
| err_alloc_rc: |
| #ifdef CONFIG_COMMON_CLK |
| if (!IS_ERR(priv->clk)) |
| clk_notifier_unregister(priv->clk, &hw->clk_nb); |
| #endif |
| return error; |
| } |
| |
| void img_ir_remove_hw(struct img_ir_priv *priv) |
| { |
| struct img_ir_priv_hw *hw = &priv->hw; |
| struct rc_dev *rdev = hw->rdev; |
| if (!rdev) |
| return; |
| img_ir_set_decoder(priv, NULL, 0); |
| hw->rdev = NULL; |
| rc_unregister_device(rdev); |
| #ifdef CONFIG_COMMON_CLK |
| if (!IS_ERR(priv->clk)) |
| clk_notifier_unregister(priv->clk, &hw->clk_nb); |
| #endif |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| int img_ir_suspend(struct device *dev) |
| { |
| struct img_ir_priv *priv = dev_get_drvdata(dev); |
| |
| if (device_may_wakeup(dev) && img_ir_enable_wake(priv)) |
| enable_irq_wake(priv->irq); |
| return 0; |
| } |
| |
| int img_ir_resume(struct device *dev) |
| { |
| struct img_ir_priv *priv = dev_get_drvdata(dev); |
| |
| if (device_may_wakeup(dev) && img_ir_disable_wake(priv)) |
| disable_irq_wake(priv->irq); |
| return 0; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |