| |
| config PRINTK_TIME |
| bool "Show timing information on printks" |
| help |
| Selecting this option causes timing information to be |
| included in printk output. This allows you to measure |
| the interval between kernel operations, including bootup |
| operations. This is useful for identifying long delays |
| in kernel startup. |
| |
| |
| config MAGIC_SYSRQ |
| bool "Magic SysRq key" |
| depends on !UML |
| help |
| If you say Y here, you will have some control over the system even |
| if the system crashes for example during kernel debugging (e.g., you |
| will be able to flush the buffer cache to disk, reboot the system |
| immediately or dump some status information). This is accomplished |
| by pressing various keys while holding SysRq (Alt+PrintScreen). It |
| also works on a serial console (on PC hardware at least), if you |
| send a BREAK and then within 5 seconds a command keypress. The |
| keys are documented in <file:Documentation/sysrq.txt>. Don't say Y |
| unless you really know what this hack does. |
| |
| config DEBUG_KERNEL |
| bool "Kernel debugging" |
| help |
| Say Y here if you are developing drivers or trying to debug and |
| identify kernel problems. |
| |
| config LOG_BUF_SHIFT |
| int "Kernel log buffer size (16 => 64KB, 17 => 128KB)" if DEBUG_KERNEL |
| range 12 21 |
| default 17 if S390 |
| default 16 if X86_NUMAQ || IA64 |
| default 15 if SMP |
| default 14 |
| help |
| Select kernel log buffer size as a power of 2. |
| Defaults and Examples: |
| 17 => 128 KB for S/390 |
| 16 => 64 KB for x86 NUMAQ or IA-64 |
| 15 => 32 KB for SMP |
| 14 => 16 KB for uniprocessor |
| 13 => 8 KB |
| 12 => 4 KB |
| |
| config DETECT_SOFTLOCKUP |
| bool "Detect Soft Lockups" |
| depends on DEBUG_KERNEL |
| default y |
| help |
| Say Y here to enable the kernel to detect "soft lockups", |
| which are bugs that cause the kernel to loop in kernel |
| mode for more than 10 seconds, without giving other tasks a |
| chance to run. |
| |
| When a soft-lockup is detected, the kernel will print the |
| current stack trace (which you should report), but the |
| system will stay locked up. This feature has negligible |
| overhead. |
| |
| (Note that "hard lockups" are separate type of bugs that |
| can be detected via the NMI-watchdog, on platforms that |
| support it.) |
| |
| config SCHEDSTATS |
| bool "Collect scheduler statistics" |
| depends on DEBUG_KERNEL && PROC_FS |
| help |
| If you say Y here, additional code will be inserted into the |
| scheduler and related routines to collect statistics about |
| scheduler behavior and provide them in /proc/schedstat. These |
| stats may be useful for both tuning and debugging the scheduler |
| If you aren't debugging the scheduler or trying to tune a specific |
| application, you can say N to avoid the very slight overhead |
| this adds. |
| |
| config DEBUG_SLAB |
| bool "Debug slab memory allocations" |
| depends on DEBUG_KERNEL && SLAB |
| help |
| Say Y here to have the kernel do limited verification on memory |
| allocation as well as poisoning memory on free to catch use of freed |
| memory. This can make kmalloc/kfree-intensive workloads much slower. |
| |
| config DEBUG_SLAB_LEAK |
| bool "Memory leak debugging" |
| depends on DEBUG_SLAB |
| |
| config DEBUG_PREEMPT |
| bool "Debug preemptible kernel" |
| depends on DEBUG_KERNEL && PREEMPT |
| default y |
| help |
| If you say Y here then the kernel will use a debug variant of the |
| commonly used smp_processor_id() function and will print warnings |
| if kernel code uses it in a preemption-unsafe way. Also, the kernel |
| will detect preemption count underflows. |
| |
| config DEBUG_MUTEXES |
| bool "Mutex debugging, deadlock detection" |
| default n |
| depends on DEBUG_KERNEL |
| help |
| This allows mutex semantics violations and mutex related deadlocks |
| (lockups) to be detected and reported automatically. |
| |
| config DEBUG_RT_MUTEXES |
| bool "RT Mutex debugging, deadlock detection" |
| default y |
| depends on DEBUG_KERNEL && RT_MUTEXES |
| help |
| This allows rt mutex semantics violations and rt mutex related |
| deadlocks (lockups) to be detected and reported automatically. |
| |
| config DEBUG_PI_LIST |
| bool |
| default y |
| depends on DEBUG_RT_MUTEXES |
| |
| config DEBUG_SPINLOCK |
| bool "Spinlock debugging" |
| depends on DEBUG_KERNEL |
| help |
| Say Y here and build SMP to catch missing spinlock initialization |
| and certain other kinds of spinlock errors commonly made. This is |
| best used in conjunction with the NMI watchdog so that spinlock |
| deadlocks are also debuggable. |
| |
| config DEBUG_SPINLOCK_SLEEP |
| bool "Sleep-inside-spinlock checking" |
| depends on DEBUG_KERNEL |
| help |
| If you say Y here, various routines which may sleep will become very |
| noisy if they are called with a spinlock held. |
| |
| config DEBUG_KOBJECT |
| bool "kobject debugging" |
| depends on DEBUG_KERNEL |
| help |
| If you say Y here, some extra kobject debugging messages will be sent |
| to the syslog. |
| |
| config DEBUG_HIGHMEM |
| bool "Highmem debugging" |
| depends on DEBUG_KERNEL && HIGHMEM |
| help |
| This options enables addition error checking for high memory systems. |
| Disable for production systems. |
| |
| config DEBUG_BUGVERBOSE |
| bool "Verbose BUG() reporting (adds 70K)" if DEBUG_KERNEL && EMBEDDED |
| depends on BUG |
| depends on ARM || ARM26 || M32R || M68K || SPARC32 || SPARC64 || X86_32 || FRV |
| default !EMBEDDED |
| help |
| Say Y here to make BUG() panics output the file name and line number |
| of the BUG call as well as the EIP and oops trace. This aids |
| debugging but costs about 70-100K of memory. |
| |
| config DEBUG_INFO |
| bool "Compile the kernel with debug info" |
| depends on DEBUG_KERNEL |
| help |
| If you say Y here the resulting kernel image will include |
| debugging info resulting in a larger kernel image. |
| Say Y here only if you plan to debug the kernel. |
| |
| If unsure, say N. |
| |
| config DEBUG_FS |
| bool "Debug Filesystem" |
| depends on SYSFS |
| help |
| debugfs is a virtual file system that kernel developers use to put |
| debugging files into. Enable this option to be able to read and |
| write to these files. |
| |
| If unsure, say N. |
| |
| config DEBUG_VM |
| bool "Debug VM" |
| depends on DEBUG_KERNEL |
| help |
| Enable this to turn on extended checks in the virtual-memory system |
| that may impact performance. |
| |
| If unsure, say N. |
| |
| config FRAME_POINTER |
| bool "Compile the kernel with frame pointers" |
| depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV || UML) |
| default y if DEBUG_INFO && UML |
| help |
| If you say Y here the resulting kernel image will be slightly larger |
| and slower, but it might give very useful debugging information on |
| some architectures or if you use external debuggers. |
| If you don't debug the kernel, you can say N. |
| |
| config UNWIND_INFO |
| bool "Compile the kernel with frame unwind information" |
| depends on !IA64 && !PARISC |
| depends on !MODULES || !(MIPS || PPC || SUPERH || V850) |
| help |
| If you say Y here the resulting kernel image will be slightly larger |
| but not slower, and it will give very useful debugging information. |
| If you don't debug the kernel, you can say N, but we may not be able |
| to solve problems without frame unwind information or frame pointers. |
| |
| config STACK_UNWIND |
| bool "Stack unwind support" |
| depends on UNWIND_INFO |
| depends on X86 |
| help |
| This enables more precise stack traces, omitting all unrelated |
| occurrences of pointers into kernel code from the dump. |
| |
| config FORCED_INLINING |
| bool "Force gcc to inline functions marked 'inline'" |
| depends on DEBUG_KERNEL |
| default y |
| help |
| This option determines if the kernel forces gcc to inline the functions |
| developers have marked 'inline'. Doing so takes away freedom from gcc to |
| do what it thinks is best, which is desirable for the gcc 3.x series of |
| compilers. The gcc 4.x series have a rewritten inlining algorithm and |
| disabling this option will generate a smaller kernel there. Hopefully |
| this algorithm is so good that allowing gcc4 to make the decision can |
| become the default in the future, until then this option is there to |
| test gcc for this. |
| |
| config RCU_TORTURE_TEST |
| tristate "torture tests for RCU" |
| depends on DEBUG_KERNEL |
| default n |
| help |
| This option provides a kernel module that runs torture tests |
| on the RCU infrastructure. The kernel module may be built |
| after the fact on the running kernel to be tested, if desired. |
| |
| Say Y here if you want RCU torture tests to start automatically |
| at boot time (you probably don't). |
| Say M if you want the RCU torture tests to build as a module. |
| Say N if you are unsure. |