| /* |
| * Atmel PIO2 Port Multiplexer support |
| * |
| * Copyright (C) 2004-2006 Atmel Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/debugfs.h> |
| #include <linux/fs.h> |
| #include <linux/platform_device.h> |
| #include <linux/irq.h> |
| |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| |
| #include <asm/arch/portmux.h> |
| |
| #include "pio.h" |
| |
| #define MAX_NR_PIO_DEVICES 8 |
| |
| struct pio_device { |
| struct gpio_chip chip; |
| void __iomem *regs; |
| const struct platform_device *pdev; |
| struct clk *clk; |
| u32 pinmux_mask; |
| char name[8]; |
| }; |
| |
| static struct pio_device pio_dev[MAX_NR_PIO_DEVICES]; |
| |
| static struct pio_device *gpio_to_pio(unsigned int gpio) |
| { |
| struct pio_device *pio; |
| unsigned int index; |
| |
| index = gpio >> 5; |
| if (index >= MAX_NR_PIO_DEVICES) |
| return NULL; |
| pio = &pio_dev[index]; |
| if (!pio->regs) |
| return NULL; |
| |
| return pio; |
| } |
| |
| /* Pin multiplexing API */ |
| |
| void __init at32_select_periph(unsigned int pin, unsigned int periph, |
| unsigned long flags) |
| { |
| struct pio_device *pio; |
| unsigned int pin_index = pin & 0x1f; |
| u32 mask = 1 << pin_index; |
| |
| pio = gpio_to_pio(pin); |
| if (unlikely(!pio)) { |
| printk("pio: invalid pin %u\n", pin); |
| goto fail; |
| } |
| |
| if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask) |
| || gpiochip_is_requested(&pio->chip, pin_index))) { |
| printk("%s: pin %u is busy\n", pio->name, pin_index); |
| goto fail; |
| } |
| |
| pio_writel(pio, PUER, mask); |
| if (periph) |
| pio_writel(pio, BSR, mask); |
| else |
| pio_writel(pio, ASR, mask); |
| |
| pio_writel(pio, PDR, mask); |
| if (!(flags & AT32_GPIOF_PULLUP)) |
| pio_writel(pio, PUDR, mask); |
| |
| return; |
| |
| fail: |
| dump_stack(); |
| } |
| |
| void __init at32_select_gpio(unsigned int pin, unsigned long flags) |
| { |
| struct pio_device *pio; |
| unsigned int pin_index = pin & 0x1f; |
| u32 mask = 1 << pin_index; |
| |
| pio = gpio_to_pio(pin); |
| if (unlikely(!pio)) { |
| printk("pio: invalid pin %u\n", pin); |
| goto fail; |
| } |
| |
| if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) { |
| printk("%s: pin %u is busy\n", pio->name, pin_index); |
| goto fail; |
| } |
| |
| if (flags & AT32_GPIOF_OUTPUT) { |
| if (flags & AT32_GPIOF_HIGH) |
| pio_writel(pio, SODR, mask); |
| else |
| pio_writel(pio, CODR, mask); |
| if (flags & AT32_GPIOF_MULTIDRV) |
| pio_writel(pio, MDER, mask); |
| else |
| pio_writel(pio, MDDR, mask); |
| pio_writel(pio, PUDR, mask); |
| pio_writel(pio, OER, mask); |
| } else { |
| if (flags & AT32_GPIOF_PULLUP) |
| pio_writel(pio, PUER, mask); |
| else |
| pio_writel(pio, PUDR, mask); |
| if (flags & AT32_GPIOF_DEGLITCH) |
| pio_writel(pio, IFER, mask); |
| else |
| pio_writel(pio, IFDR, mask); |
| pio_writel(pio, ODR, mask); |
| } |
| |
| pio_writel(pio, PER, mask); |
| |
| return; |
| |
| fail: |
| dump_stack(); |
| } |
| |
| /* Reserve a pin, preventing anyone else from changing its configuration. */ |
| void __init at32_reserve_pin(unsigned int pin) |
| { |
| struct pio_device *pio; |
| unsigned int pin_index = pin & 0x1f; |
| |
| pio = gpio_to_pio(pin); |
| if (unlikely(!pio)) { |
| printk("pio: invalid pin %u\n", pin); |
| goto fail; |
| } |
| |
| if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) { |
| printk("%s: pin %u is busy\n", pio->name, pin_index); |
| goto fail; |
| } |
| |
| return; |
| |
| fail: |
| dump_stack(); |
| } |
| |
| /*--------------------------------------------------------------------------*/ |
| |
| /* GPIO API */ |
| |
| static int direction_input(struct gpio_chip *chip, unsigned offset) |
| { |
| struct pio_device *pio = container_of(chip, struct pio_device, chip); |
| u32 mask = 1 << offset; |
| |
| if (!(pio_readl(pio, PSR) & mask)) |
| return -EINVAL; |
| |
| pio_writel(pio, ODR, mask); |
| return 0; |
| } |
| |
| static int gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct pio_device *pio = container_of(chip, struct pio_device, chip); |
| |
| return (pio_readl(pio, PDSR) >> offset) & 1; |
| } |
| |
| static void gpio_set(struct gpio_chip *chip, unsigned offset, int value); |
| |
| static int direction_output(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct pio_device *pio = container_of(chip, struct pio_device, chip); |
| u32 mask = 1 << offset; |
| |
| if (!(pio_readl(pio, PSR) & mask)) |
| return -EINVAL; |
| |
| gpio_set(chip, offset, value); |
| pio_writel(pio, OER, mask); |
| return 0; |
| } |
| |
| static void gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct pio_device *pio = container_of(chip, struct pio_device, chip); |
| u32 mask = 1 << offset; |
| |
| if (value) |
| pio_writel(pio, SODR, mask); |
| else |
| pio_writel(pio, CODR, mask); |
| } |
| |
| /*--------------------------------------------------------------------------*/ |
| |
| /* GPIO IRQ support */ |
| |
| static void gpio_irq_mask(unsigned irq) |
| { |
| unsigned gpio = irq_to_gpio(irq); |
| struct pio_device *pio = &pio_dev[gpio >> 5]; |
| |
| pio_writel(pio, IDR, 1 << (gpio & 0x1f)); |
| } |
| |
| static void gpio_irq_unmask(unsigned irq) |
| { |
| unsigned gpio = irq_to_gpio(irq); |
| struct pio_device *pio = &pio_dev[gpio >> 5]; |
| |
| pio_writel(pio, IER, 1 << (gpio & 0x1f)); |
| } |
| |
| static int gpio_irq_type(unsigned irq, unsigned type) |
| { |
| if (type != IRQ_TYPE_EDGE_BOTH && type != IRQ_TYPE_NONE) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static struct irq_chip gpio_irqchip = { |
| .name = "gpio", |
| .mask = gpio_irq_mask, |
| .unmask = gpio_irq_unmask, |
| .set_type = gpio_irq_type, |
| }; |
| |
| static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) |
| { |
| struct pio_device *pio = get_irq_chip_data(irq); |
| unsigned gpio_irq; |
| |
| gpio_irq = (unsigned) get_irq_data(irq); |
| for (;;) { |
| u32 isr; |
| struct irq_desc *d; |
| |
| /* ack pending GPIO interrupts */ |
| isr = pio_readl(pio, ISR) & pio_readl(pio, IMR); |
| if (!isr) |
| break; |
| do { |
| int i; |
| |
| i = ffs(isr) - 1; |
| isr &= ~(1 << i); |
| |
| i += gpio_irq; |
| d = &irq_desc[i]; |
| |
| d->handle_irq(i, d); |
| } while (isr); |
| } |
| } |
| |
| static void __init |
| gpio_irq_setup(struct pio_device *pio, int irq, int gpio_irq) |
| { |
| unsigned i; |
| |
| set_irq_chip_data(irq, pio); |
| set_irq_data(irq, (void *) gpio_irq); |
| |
| for (i = 0; i < 32; i++, gpio_irq++) { |
| set_irq_chip_data(gpio_irq, pio); |
| set_irq_chip_and_handler(gpio_irq, &gpio_irqchip, |
| handle_simple_irq); |
| } |
| |
| set_irq_chained_handler(irq, gpio_irq_handler); |
| } |
| |
| /*--------------------------------------------------------------------------*/ |
| |
| #ifdef CONFIG_DEBUG_FS |
| |
| #include <linux/seq_file.h> |
| |
| /* |
| * This shows more info than the generic gpio dump code: |
| * pullups, deglitching, open drain drive. |
| */ |
| static void pio_bank_show(struct seq_file *s, struct gpio_chip *chip) |
| { |
| struct pio_device *pio = container_of(chip, struct pio_device, chip); |
| u32 psr, osr, imr, pdsr, pusr, ifsr, mdsr; |
| unsigned i; |
| u32 mask; |
| char bank; |
| |
| psr = pio_readl(pio, PSR); |
| osr = pio_readl(pio, OSR); |
| imr = pio_readl(pio, IMR); |
| pdsr = pio_readl(pio, PDSR); |
| pusr = pio_readl(pio, PUSR); |
| ifsr = pio_readl(pio, IFSR); |
| mdsr = pio_readl(pio, MDSR); |
| |
| bank = 'A' + pio->pdev->id; |
| |
| for (i = 0, mask = 1; i < 32; i++, mask <<= 1) { |
| const char *label; |
| |
| label = gpiochip_is_requested(chip, i); |
| if (!label && (imr & mask)) |
| label = "[irq]"; |
| if (!label) |
| continue; |
| |
| seq_printf(s, " gpio-%-3d P%c%-2d (%-12s) %s %s %s", |
| chip->base + i, bank, i, |
| label, |
| (osr & mask) ? "out" : "in ", |
| (mask & pdsr) ? "hi" : "lo", |
| (mask & pusr) ? " " : "up"); |
| if (ifsr & mask) |
| seq_printf(s, " deglitch"); |
| if ((osr & mdsr) & mask) |
| seq_printf(s, " open-drain"); |
| if (imr & mask) |
| seq_printf(s, " irq-%d edge-both", |
| gpio_to_irq(chip->base + i)); |
| seq_printf(s, "\n"); |
| } |
| } |
| |
| #else |
| #define pio_bank_show NULL |
| #endif |
| |
| |
| /*--------------------------------------------------------------------------*/ |
| |
| static int __init pio_probe(struct platform_device *pdev) |
| { |
| struct pio_device *pio = NULL; |
| int irq = platform_get_irq(pdev, 0); |
| int gpio_irq_base = GPIO_IRQ_BASE + pdev->id * 32; |
| |
| BUG_ON(pdev->id >= MAX_NR_PIO_DEVICES); |
| pio = &pio_dev[pdev->id]; |
| BUG_ON(!pio->regs); |
| |
| pio->chip.label = pio->name; |
| pio->chip.base = pdev->id * 32; |
| pio->chip.ngpio = 32; |
| pio->chip.dev = &pdev->dev; |
| pio->chip.owner = THIS_MODULE; |
| |
| pio->chip.direction_input = direction_input; |
| pio->chip.get = gpio_get; |
| pio->chip.direction_output = direction_output; |
| pio->chip.set = gpio_set; |
| pio->chip.dbg_show = pio_bank_show; |
| |
| gpiochip_add(&pio->chip); |
| |
| gpio_irq_setup(pio, irq, gpio_irq_base); |
| |
| platform_set_drvdata(pdev, pio); |
| |
| printk(KERN_DEBUG "%s: base 0x%p, irq %d chains %d..%d\n", |
| pio->name, pio->regs, irq, gpio_irq_base, gpio_irq_base + 31); |
| |
| return 0; |
| } |
| |
| static struct platform_driver pio_driver = { |
| .probe = pio_probe, |
| .driver = { |
| .name = "pio", |
| }, |
| }; |
| |
| static int __init pio_init(void) |
| { |
| return platform_driver_register(&pio_driver); |
| } |
| postcore_initcall(pio_init); |
| |
| void __init at32_init_pio(struct platform_device *pdev) |
| { |
| struct resource *regs; |
| struct pio_device *pio; |
| |
| if (pdev->id > MAX_NR_PIO_DEVICES) { |
| dev_err(&pdev->dev, "only %d PIO devices supported\n", |
| MAX_NR_PIO_DEVICES); |
| return; |
| } |
| |
| pio = &pio_dev[pdev->id]; |
| snprintf(pio->name, sizeof(pio->name), "pio%d", pdev->id); |
| |
| regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!regs) { |
| dev_err(&pdev->dev, "no mmio resource defined\n"); |
| return; |
| } |
| |
| pio->clk = clk_get(&pdev->dev, "mck"); |
| if (IS_ERR(pio->clk)) |
| /* |
| * This is a fatal error, but if we continue we might |
| * be so lucky that we manage to initialize the |
| * console and display this message... |
| */ |
| dev_err(&pdev->dev, "no mck clock defined\n"); |
| else |
| clk_enable(pio->clk); |
| |
| pio->pdev = pdev; |
| pio->regs = ioremap(regs->start, regs->end - regs->start + 1); |
| |
| /* start with irqs disabled and acked */ |
| pio_writel(pio, IDR, ~0UL); |
| (void) pio_readl(pio, ISR); |
| } |