| /* |
| * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> |
| * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> |
| * Copyright (c) 2007 Matthew W. S. Bell <mentor@madwifi.org> |
| * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu> |
| * Copyright (c) 2007 Pavel Roskin <proski@gnu.org> |
| * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> |
| * |
| * Permission to use, copy, modify, and distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| * |
| */ |
| |
| /* |
| * HW related functions for Atheros Wireless LAN devices. |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| |
| #include "reg.h" |
| #include "base.h" |
| #include "debug.h" |
| |
| /*Rate tables*/ |
| static const struct ath5k_rate_table ath5k_rt_11a = AR5K_RATES_11A; |
| static const struct ath5k_rate_table ath5k_rt_11b = AR5K_RATES_11B; |
| static const struct ath5k_rate_table ath5k_rt_11g = AR5K_RATES_11G; |
| static const struct ath5k_rate_table ath5k_rt_turbo = AR5K_RATES_TURBO; |
| static const struct ath5k_rate_table ath5k_rt_xr = AR5K_RATES_XR; |
| |
| /*Prototypes*/ |
| static int ath5k_hw_nic_reset(struct ath5k_hw *, u32); |
| static int ath5k_hw_nic_wakeup(struct ath5k_hw *, int, bool); |
| static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *, struct ath5k_desc *, |
| unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, |
| unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, |
| unsigned int, unsigned int); |
| static int ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *, struct ath5k_desc *, |
| unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, |
| unsigned int); |
| static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *, struct ath5k_desc *, |
| struct ath5k_tx_status *); |
| static int ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *, struct ath5k_desc *, |
| unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, |
| unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, |
| unsigned int, unsigned int); |
| static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *, struct ath5k_desc *, |
| struct ath5k_tx_status *); |
| static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *, struct ath5k_desc *, |
| struct ath5k_rx_status *); |
| static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *, struct ath5k_desc *, |
| struct ath5k_rx_status *); |
| static int ath5k_hw_get_capabilities(struct ath5k_hw *); |
| |
| static int ath5k_eeprom_init(struct ath5k_hw *); |
| static int ath5k_eeprom_read_mac(struct ath5k_hw *, u8 *); |
| |
| static int ath5k_hw_enable_pspoll(struct ath5k_hw *, u8 *, u16); |
| static int ath5k_hw_disable_pspoll(struct ath5k_hw *); |
| |
| /* |
| * Enable to overwrite the country code (use "00" for debug) |
| */ |
| #if 0 |
| #define COUNTRYCODE "00" |
| #endif |
| |
| /*******************\ |
| General Functions |
| \*******************/ |
| |
| /* |
| * Functions used internaly |
| */ |
| |
| static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo) |
| { |
| return turbo ? (usec * 80) : (usec * 40); |
| } |
| |
| static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo) |
| { |
| return turbo ? (clock / 80) : (clock / 40); |
| } |
| |
| /* |
| * Check if a register write has been completed |
| */ |
| int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, |
| bool is_set) |
| { |
| int i; |
| u32 data; |
| |
| for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) { |
| data = ath5k_hw_reg_read(ah, reg); |
| if (is_set && (data & flag)) |
| break; |
| else if ((data & flag) == val) |
| break; |
| udelay(15); |
| } |
| |
| return (i <= 0) ? -EAGAIN : 0; |
| } |
| |
| |
| /***************************************\ |
| Attach/Detach Functions |
| \***************************************/ |
| |
| /* |
| * Power On Self Test helper function |
| */ |
| static int ath5k_hw_post(struct ath5k_hw *ah) |
| { |
| |
| int i, c; |
| u16 cur_reg; |
| u16 regs[2] = {AR5K_STA_ID0, AR5K_PHY(8)}; |
| u32 var_pattern; |
| u32 static_pattern[4] = { |
| 0x55555555, 0xaaaaaaaa, |
| 0x66666666, 0x99999999 |
| }; |
| u32 init_val; |
| u32 cur_val; |
| |
| for (c = 0; c < 2; c++) { |
| |
| cur_reg = regs[c]; |
| init_val = ath5k_hw_reg_read(ah, cur_reg); |
| |
| for (i = 0; i < 256; i++) { |
| var_pattern = i << 16 | i; |
| ath5k_hw_reg_write(ah, var_pattern, cur_reg); |
| cur_val = ath5k_hw_reg_read(ah, cur_reg); |
| |
| if (cur_val != var_pattern) { |
| ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); |
| return -EAGAIN; |
| } |
| |
| /* Found on ndiswrapper dumps */ |
| var_pattern = 0x0039080f; |
| ath5k_hw_reg_write(ah, var_pattern, cur_reg); |
| } |
| |
| for (i = 0; i < 4; i++) { |
| var_pattern = static_pattern[i]; |
| ath5k_hw_reg_write(ah, var_pattern, cur_reg); |
| cur_val = ath5k_hw_reg_read(ah, cur_reg); |
| |
| if (cur_val != var_pattern) { |
| ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); |
| return -EAGAIN; |
| } |
| |
| /* Found on ndiswrapper dumps */ |
| var_pattern = 0x003b080f; |
| ath5k_hw_reg_write(ah, var_pattern, cur_reg); |
| } |
| } |
| |
| return 0; |
| |
| } |
| |
| /* |
| * Check if the device is supported and initialize the needed structs |
| */ |
| struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) |
| { |
| struct ath5k_hw *ah; |
| struct pci_dev *pdev = sc->pdev; |
| u8 mac[ETH_ALEN]; |
| int ret; |
| u32 srev; |
| |
| /*If we passed the test malloc a ath5k_hw struct*/ |
| ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL); |
| if (ah == NULL) { |
| ret = -ENOMEM; |
| ATH5K_ERR(sc, "out of memory\n"); |
| goto err; |
| } |
| |
| ah->ah_sc = sc; |
| ah->ah_iobase = sc->iobase; |
| |
| /* |
| * HW information |
| */ |
| |
| ah->ah_op_mode = IEEE80211_IF_TYPE_STA; |
| ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT; |
| ah->ah_turbo = false; |
| ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; |
| ah->ah_imr = 0; |
| ah->ah_atim_window = 0; |
| ah->ah_aifs = AR5K_TUNE_AIFS; |
| ah->ah_cw_min = AR5K_TUNE_CWMIN; |
| ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY; |
| ah->ah_software_retry = false; |
| ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY; |
| |
| /* |
| * Set the mac revision based on the pci id |
| */ |
| ah->ah_version = mac_version; |
| |
| /*Fill the ath5k_hw struct with the needed functions*/ |
| if (ah->ah_version == AR5K_AR5212) |
| ah->ah_magic = AR5K_EEPROM_MAGIC_5212; |
| else if (ah->ah_version == AR5K_AR5211) |
| ah->ah_magic = AR5K_EEPROM_MAGIC_5211; |
| |
| if (ah->ah_version == AR5K_AR5212) { |
| ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc; |
| ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc; |
| ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status; |
| } else { |
| ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc; |
| ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc; |
| ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status; |
| } |
| |
| if (ah->ah_version == AR5K_AR5212) |
| ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status; |
| else if (ah->ah_version <= AR5K_AR5211) |
| ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status; |
| |
| /* Bring device out of sleep and reset it's units */ |
| ret = ath5k_hw_nic_wakeup(ah, AR5K_INIT_MODE, true); |
| if (ret) |
| goto err_free; |
| |
| /* Get MAC, PHY and RADIO revisions */ |
| srev = ath5k_hw_reg_read(ah, AR5K_SREV); |
| ah->ah_mac_srev = srev; |
| ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER); |
| ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV); |
| ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) & |
| 0xffffffff; |
| ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah, |
| CHANNEL_5GHZ); |
| |
| if (ah->ah_version == AR5K_AR5210) |
| ah->ah_radio_2ghz_revision = 0; |
| else |
| ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, |
| CHANNEL_2GHZ); |
| |
| /* Return on unsuported chips (unsupported eeprom etc) */ |
| if ((srev >= AR5K_SREV_VER_AR5416) && |
| (srev < AR5K_SREV_VER_AR2425)) { |
| ATH5K_ERR(sc, "Device not yet supported.\n"); |
| ret = -ENODEV; |
| goto err_free; |
| } else if (srev == AR5K_SREV_VER_AR2425) { |
| ATH5K_WARN(sc, "Support for RF2425 is under development.\n"); |
| } |
| |
| /* Identify single chip solutions */ |
| if (((srev <= AR5K_SREV_VER_AR5414) && |
| (srev >= AR5K_SREV_VER_AR2413)) || |
| (srev == AR5K_SREV_VER_AR2425)) { |
| ah->ah_single_chip = true; |
| } else { |
| ah->ah_single_chip = false; |
| } |
| |
| /* Single chip radio */ |
| if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision) |
| ah->ah_radio_2ghz_revision = 0; |
| |
| /* Identify the radio chip*/ |
| if (ah->ah_version == AR5K_AR5210) { |
| ah->ah_radio = AR5K_RF5110; |
| } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) { |
| ah->ah_radio = AR5K_RF5111; |
| ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111; |
| } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC0) { |
| |
| ah->ah_radio = AR5K_RF5112; |
| |
| if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112A) { |
| ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112; |
| } else { |
| ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A; |
| } |
| |
| } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) { |
| ah->ah_radio = AR5K_RF2413; |
| ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A; |
| } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC2) { |
| |
| ah->ah_radio = AR5K_RF5413; |
| |
| if (ah->ah_mac_srev <= AR5K_SREV_VER_AR5424 && |
| ah->ah_mac_srev >= AR5K_SREV_VER_AR2424) |
| ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5424; |
| else |
| ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A; |
| /* |
| * Register returns 0x4 for radio revision |
| * so ath5k_hw_radio_revision doesn't parse the value |
| * correctly. For now we are based on mac's srev to |
| * identify RF2425 radio. |
| */ |
| } else if (srev == AR5K_SREV_VER_AR2425) { |
| ah->ah_radio = AR5K_RF2425; |
| ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112; |
| } |
| |
| ah->ah_phy = AR5K_PHY(0); |
| |
| /* |
| * Identify AR5212-based PCI-E cards |
| * And write some initial settings. |
| * |
| * (doing a "strings" on ndis driver |
| * -ar5211.sys- reveals the following |
| * pci-e related functions: |
| * |
| * pcieClockReq |
| * pcieRxErrNotify |
| * pcieL1SKPEnable |
| * pcieAspm |
| * pcieDisableAspmOnRfWake |
| * pciePowerSaveEnable |
| * |
| * I guess these point to ClockReq but |
| * i'm not sure.) |
| */ |
| if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) { |
| ath5k_hw_reg_write(ah, 0x9248fc00, 0x4080); |
| ath5k_hw_reg_write(ah, 0x24924924, 0x4080); |
| ath5k_hw_reg_write(ah, 0x28000039, 0x4080); |
| ath5k_hw_reg_write(ah, 0x53160824, 0x4080); |
| ath5k_hw_reg_write(ah, 0xe5980579, 0x4080); |
| ath5k_hw_reg_write(ah, 0x001defff, 0x4080); |
| ath5k_hw_reg_write(ah, 0x1aaabe40, 0x4080); |
| ath5k_hw_reg_write(ah, 0xbe105554, 0x4080); |
| ath5k_hw_reg_write(ah, 0x000e3007, 0x4080); |
| ath5k_hw_reg_write(ah, 0x00000000, 0x4084); |
| } |
| |
| /* |
| * POST |
| */ |
| ret = ath5k_hw_post(ah); |
| if (ret) |
| goto err_free; |
| |
| /* |
| * Get card capabilities, values, ... |
| */ |
| |
| ret = ath5k_eeprom_init(ah); |
| if (ret) { |
| ATH5K_ERR(sc, "unable to init EEPROM\n"); |
| goto err_free; |
| } |
| |
| /* Get misc capabilities */ |
| ret = ath5k_hw_get_capabilities(ah); |
| if (ret) { |
| ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n", |
| sc->pdev->device); |
| goto err_free; |
| } |
| |
| /* Get MAC address */ |
| ret = ath5k_eeprom_read_mac(ah, mac); |
| if (ret) { |
| ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", |
| sc->pdev->device); |
| goto err_free; |
| } |
| |
| ath5k_hw_set_lladdr(ah, mac); |
| /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ |
| memset(ah->ah_bssid, 0xff, ETH_ALEN); |
| ath5k_hw_set_associd(ah, ah->ah_bssid, 0); |
| ath5k_hw_set_opmode(ah); |
| |
| ath5k_hw_set_rfgain_opt(ah); |
| |
| return ah; |
| err_free: |
| kfree(ah); |
| err: |
| return ERR_PTR(ret); |
| } |
| |
| /* |
| * Bring up MAC + PHY Chips |
| */ |
| static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) |
| { |
| struct pci_dev *pdev = ah->ah_sc->pdev; |
| u32 turbo, mode, clock, bus_flags; |
| int ret; |
| |
| turbo = 0; |
| mode = 0; |
| clock = 0; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| |
| /* Wakeup the device */ |
| ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); |
| if (ret) { |
| ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n"); |
| return ret; |
| } |
| |
| if (ah->ah_version != AR5K_AR5210) { |
| /* |
| * Get channel mode flags |
| */ |
| |
| if (ah->ah_radio >= AR5K_RF5112) { |
| mode = AR5K_PHY_MODE_RAD_RF5112; |
| clock = AR5K_PHY_PLL_RF5112; |
| } else { |
| mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/ |
| clock = AR5K_PHY_PLL_RF5111; /*Zero*/ |
| } |
| |
| if (flags & CHANNEL_2GHZ) { |
| mode |= AR5K_PHY_MODE_FREQ_2GHZ; |
| clock |= AR5K_PHY_PLL_44MHZ; |
| |
| if (flags & CHANNEL_CCK) { |
| mode |= AR5K_PHY_MODE_MOD_CCK; |
| } else if (flags & CHANNEL_OFDM) { |
| /* XXX Dynamic OFDM/CCK is not supported by the |
| * AR5211 so we set MOD_OFDM for plain g (no |
| * CCK headers) operation. We need to test |
| * this, 5211 might support ofdm-only g after |
| * all, there are also initial register values |
| * in the code for g mode (see initvals.c). */ |
| if (ah->ah_version == AR5K_AR5211) |
| mode |= AR5K_PHY_MODE_MOD_OFDM; |
| else |
| mode |= AR5K_PHY_MODE_MOD_DYN; |
| } else { |
| ATH5K_ERR(ah->ah_sc, |
| "invalid radio modulation mode\n"); |
| return -EINVAL; |
| } |
| } else if (flags & CHANNEL_5GHZ) { |
| mode |= AR5K_PHY_MODE_FREQ_5GHZ; |
| clock |= AR5K_PHY_PLL_40MHZ; |
| |
| if (flags & CHANNEL_OFDM) |
| mode |= AR5K_PHY_MODE_MOD_OFDM; |
| else { |
| ATH5K_ERR(ah->ah_sc, |
| "invalid radio modulation mode\n"); |
| return -EINVAL; |
| } |
| } else { |
| ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n"); |
| return -EINVAL; |
| } |
| |
| if (flags & CHANNEL_TURBO) |
| turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT; |
| } else { /* Reset the device */ |
| |
| /* ...enable Atheros turbo mode if requested */ |
| if (flags & CHANNEL_TURBO) |
| ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE, |
| AR5K_PHY_TURBO); |
| } |
| |
| /* reseting PCI on PCI-E cards results card to hang |
| * and always return 0xffff... so we ingore that flag |
| * for PCI-E cards */ |
| bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI; |
| |
| /* Reset chipset */ |
| ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | |
| AR5K_RESET_CTL_BASEBAND | bus_flags); |
| if (ret) { |
| ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n"); |
| return -EIO; |
| } |
| |
| if (ah->ah_version == AR5K_AR5210) |
| udelay(2300); |
| |
| /* ...wakeup again!*/ |
| ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); |
| if (ret) { |
| ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n"); |
| return ret; |
| } |
| |
| /* ...final warm reset */ |
| if (ath5k_hw_nic_reset(ah, 0)) { |
| ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n"); |
| return -EIO; |
| } |
| |
| if (ah->ah_version != AR5K_AR5210) { |
| /* ...set the PHY operating mode */ |
| ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL); |
| udelay(300); |
| |
| ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE); |
| ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Get the rate table for a specific operation mode |
| */ |
| const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, |
| unsigned int mode) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| |
| if (!test_bit(mode, ah->ah_capabilities.cap_mode)) |
| return NULL; |
| |
| /* Get rate tables */ |
| switch (mode) { |
| case AR5K_MODE_11A: |
| return &ath5k_rt_11a; |
| case AR5K_MODE_11A_TURBO: |
| return &ath5k_rt_turbo; |
| case AR5K_MODE_11B: |
| return &ath5k_rt_11b; |
| case AR5K_MODE_11G: |
| return &ath5k_rt_11g; |
| case AR5K_MODE_11G_TURBO: |
| return &ath5k_rt_xr; |
| } |
| |
| return NULL; |
| } |
| |
| /* |
| * Free the ath5k_hw struct |
| */ |
| void ath5k_hw_detach(struct ath5k_hw *ah) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| |
| __set_bit(ATH_STAT_INVALID, ah->ah_sc->status); |
| |
| if (ah->ah_rf_banks != NULL) |
| kfree(ah->ah_rf_banks); |
| |
| /* assume interrupts are down */ |
| kfree(ah); |
| } |
| |
| /****************************\ |
| Reset function and helpers |
| \****************************/ |
| |
| /** |
| * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212 |
| * |
| * @ah: the &struct ath5k_hw |
| * @channel: the currently set channel upon reset |
| * |
| * Write the OFDM timings for the AR5212 upon reset. This is a helper for |
| * ath5k_hw_reset(). This seems to tune the PLL a specified frequency |
| * depending on the bandwidth of the channel. |
| * |
| */ |
| static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, |
| struct ieee80211_channel *channel) |
| { |
| /* Get exponent and mantissa and set it */ |
| u32 coef_scaled, coef_exp, coef_man, |
| ds_coef_exp, ds_coef_man, clock; |
| |
| if (!(ah->ah_version == AR5K_AR5212) || |
| !(channel->hw_value & CHANNEL_OFDM)) |
| BUG(); |
| |
| /* Seems there are two PLLs, one for baseband sampling and one |
| * for tuning. Tuning basebands are 40 MHz or 80MHz when in |
| * turbo. */ |
| clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40; |
| coef_scaled = ((5 * (clock << 24)) / 2) / |
| channel->center_freq; |
| |
| for (coef_exp = 31; coef_exp > 0; coef_exp--) |
| if ((coef_scaled >> coef_exp) & 0x1) |
| break; |
| |
| if (!coef_exp) |
| return -EINVAL; |
| |
| coef_exp = 14 - (coef_exp - 24); |
| coef_man = coef_scaled + |
| (1 << (24 - coef_exp - 1)); |
| ds_coef_man = coef_man >> (24 - coef_exp); |
| ds_coef_exp = coef_exp - 16; |
| |
| AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, |
| AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man); |
| AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, |
| AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp); |
| |
| return 0; |
| } |
| |
| /** |
| * ath5k_hw_write_rate_duration - set rate duration during hw resets |
| * |
| * @ah: the &struct ath5k_hw |
| * @mode: one of enum ath5k_driver_mode |
| * |
| * Write the rate duration table for the current mode upon hw reset. This |
| * is a helper for ath5k_hw_reset(). It seems all this is doing is setting |
| * an ACK timeout for the hardware for the current mode for each rate. The |
| * rates which are capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, |
| * and 11Mbps) have another register for the short preamble ACK timeout |
| * calculation. |
| * |
| */ |
| static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, |
| unsigned int mode) |
| { |
| struct ath5k_softc *sc = ah->ah_sc; |
| const struct ath5k_rate_table *rt; |
| struct ieee80211_rate srate = {}; |
| unsigned int i; |
| |
| /* Get rate table for the current operating mode */ |
| rt = ath5k_hw_get_rate_table(ah, mode); |
| |
| /* Write rate duration table */ |
| for (i = 0; i < rt->rate_count; i++) { |
| const struct ath5k_rate *rate, *control_rate; |
| |
| u32 reg; |
| u16 tx_time; |
| |
| rate = &rt->rates[i]; |
| control_rate = &rt->rates[rate->control_rate]; |
| |
| /* Set ACK timeout */ |
| reg = AR5K_RATE_DUR(rate->rate_code); |
| |
| srate.bitrate = control_rate->rate_kbps/100; |
| |
| /* An ACK frame consists of 10 bytes. If you add the FCS, |
| * which ieee80211_generic_frame_duration() adds, |
| * its 14 bytes. Note we use the control rate and not the |
| * actual rate for this rate. See mac80211 tx.c |
| * ieee80211_duration() for a brief description of |
| * what rate we should choose to TX ACKs. */ |
| tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw, |
| sc->vif, 10, &srate)); |
| |
| ath5k_hw_reg_write(ah, tx_time, reg); |
| |
| if (!HAS_SHPREAMBLE(i)) |
| continue; |
| |
| /* |
| * We're not distinguishing short preamble here, |
| * This is true, all we'll get is a longer value here |
| * which is not necessarilly bad. We could use |
| * export ieee80211_frame_duration() but that needs to be |
| * fixed first to be properly used by mac802111 drivers: |
| * |
| * - remove erp stuff and let the routine figure ofdm |
| * erp rates |
| * - remove passing argument ieee80211_local as |
| * drivers don't have access to it |
| * - move drivers using ieee80211_generic_frame_duration() |
| * to this |
| */ |
| ath5k_hw_reg_write(ah, tx_time, |
| reg + (AR5K_SET_SHORT_PREAMBLE << 2)); |
| } |
| } |
| |
| /* |
| * Main reset function |
| */ |
| int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, |
| struct ieee80211_channel *channel, bool change_channel) |
| { |
| struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; |
| struct pci_dev *pdev = ah->ah_sc->pdev; |
| u32 data, s_seq, s_ant, s_led[3], dma_size; |
| unsigned int i, mode, freq, ee_mode, ant[2]; |
| int ret; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| |
| s_seq = 0; |
| s_ant = 0; |
| ee_mode = 0; |
| freq = 0; |
| mode = 0; |
| |
| /* |
| * Save some registers before a reset |
| */ |
| /*DCU/Antenna selection not available on 5210*/ |
| if (ah->ah_version != AR5K_AR5210) { |
| if (change_channel) { |
| /* Seq number for queue 0 -do this for all queues ? */ |
| s_seq = ath5k_hw_reg_read(ah, |
| AR5K_QUEUE_DFS_SEQNUM(0)); |
| /*Default antenna*/ |
| s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA); |
| } |
| } |
| |
| /*GPIOs*/ |
| s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE; |
| s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR); |
| s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO); |
| |
| if (change_channel && ah->ah_rf_banks != NULL) |
| ath5k_hw_get_rf_gain(ah); |
| |
| |
| /*Wakeup the device*/ |
| ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false); |
| if (ret) |
| return ret; |
| |
| /* |
| * Initialize operating mode |
| */ |
| ah->ah_op_mode = op_mode; |
| |
| /* |
| * 5111/5112 Settings |
| * 5210 only comes with RF5110 |
| */ |
| if (ah->ah_version != AR5K_AR5210) { |
| if (ah->ah_radio != AR5K_RF5111 && |
| ah->ah_radio != AR5K_RF5112 && |
| ah->ah_radio != AR5K_RF5413 && |
| ah->ah_radio != AR5K_RF2413 && |
| ah->ah_radio != AR5K_RF2425) { |
| ATH5K_ERR(ah->ah_sc, |
| "invalid phy radio: %u\n", ah->ah_radio); |
| return -EINVAL; |
| } |
| |
| switch (channel->hw_value & CHANNEL_MODES) { |
| case CHANNEL_A: |
| mode = AR5K_MODE_11A; |
| freq = AR5K_INI_RFGAIN_5GHZ; |
| ee_mode = AR5K_EEPROM_MODE_11A; |
| break; |
| case CHANNEL_G: |
| mode = AR5K_MODE_11G; |
| freq = AR5K_INI_RFGAIN_2GHZ; |
| ee_mode = AR5K_EEPROM_MODE_11G; |
| break; |
| case CHANNEL_B: |
| mode = AR5K_MODE_11B; |
| freq = AR5K_INI_RFGAIN_2GHZ; |
| ee_mode = AR5K_EEPROM_MODE_11B; |
| break; |
| case CHANNEL_T: |
| mode = AR5K_MODE_11A_TURBO; |
| freq = AR5K_INI_RFGAIN_5GHZ; |
| ee_mode = AR5K_EEPROM_MODE_11A; |
| break; |
| /*Is this ok on 5211 too ?*/ |
| case CHANNEL_TG: |
| mode = AR5K_MODE_11G_TURBO; |
| freq = AR5K_INI_RFGAIN_2GHZ; |
| ee_mode = AR5K_EEPROM_MODE_11G; |
| break; |
| case CHANNEL_XR: |
| if (ah->ah_version == AR5K_AR5211) { |
| ATH5K_ERR(ah->ah_sc, |
| "XR mode not available on 5211"); |
| return -EINVAL; |
| } |
| mode = AR5K_MODE_XR; |
| freq = AR5K_INI_RFGAIN_5GHZ; |
| ee_mode = AR5K_EEPROM_MODE_11A; |
| break; |
| default: |
| ATH5K_ERR(ah->ah_sc, |
| "invalid channel: %d\n", channel->center_freq); |
| return -EINVAL; |
| } |
| |
| /* PHY access enable */ |
| ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); |
| |
| } |
| |
| ret = ath5k_hw_write_initvals(ah, mode, change_channel); |
| if (ret) |
| return ret; |
| |
| /* |
| * 5211/5212 Specific |
| */ |
| if (ah->ah_version != AR5K_AR5210) { |
| /* |
| * Write initial RF gain settings |
| * This should work for both 5111/5112 |
| */ |
| ret = ath5k_hw_rfgain(ah, freq); |
| if (ret) |
| return ret; |
| |
| mdelay(1); |
| |
| /* |
| * Write some more initial register settings |
| */ |
| if (ah->ah_version == AR5K_AR5212) { |
| ath5k_hw_reg_write(ah, 0x0002a002, AR5K_PHY(11)); |
| |
| if (channel->hw_value == CHANNEL_G) |
| if (ah->ah_mac_srev < AR5K_SREV_VER_AR2413) |
| ath5k_hw_reg_write(ah, 0x00f80d80, |
| AR5K_PHY(83)); |
| else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2424) |
| ath5k_hw_reg_write(ah, 0x00380140, |
| AR5K_PHY(83)); |
| else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2425) |
| ath5k_hw_reg_write(ah, 0x00fc0ec0, |
| AR5K_PHY(83)); |
| else /* 2425 */ |
| ath5k_hw_reg_write(ah, 0x00fc0fc0, |
| AR5K_PHY(83)); |
| else |
| ath5k_hw_reg_write(ah, 0x00000000, |
| AR5K_PHY(83)); |
| |
| ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); |
| ath5k_hw_reg_write(ah, 0x0000000f, 0x8060); |
| ath5k_hw_reg_write(ah, 0x00000000, 0xa254); |
| ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL); |
| } |
| |
| /* Fix for first revision of the RF5112 RF chipset */ |
| if (ah->ah_radio >= AR5K_RF5112 && |
| ah->ah_radio_5ghz_revision < |
| AR5K_SREV_RAD_5112A) { |
| ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD, |
| AR5K_PHY_CCKTXCTL); |
| if (channel->hw_value & CHANNEL_5GHZ) |
| data = 0xffb81020; |
| else |
| data = 0xffb80d20; |
| ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); |
| } |
| |
| /* |
| * Set TX power (FIXME) |
| */ |
| ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER); |
| if (ret) |
| return ret; |
| |
| /* Write rate duration table only on AR5212 and if |
| * virtual interface has already been brought up |
| * XXX: rethink this after new mode changes to |
| * mac80211 are integrated */ |
| if (ah->ah_version == AR5K_AR5212 && |
| ah->ah_sc->vif != NULL) |
| ath5k_hw_write_rate_duration(ah, mode); |
| |
| /* |
| * Write RF registers |
| * TODO:Does this work on 5211 (5111) ? |
| */ |
| ret = ath5k_hw_rfregs(ah, channel, mode); |
| if (ret) |
| return ret; |
| |
| /* |
| * Configure additional registers |
| */ |
| |
| /* Write OFDM timings on 5212*/ |
| if (ah->ah_version == AR5K_AR5212 && |
| channel->hw_value & CHANNEL_OFDM) { |
| ret = ath5k_hw_write_ofdm_timings(ah, channel); |
| if (ret) |
| return ret; |
| } |
| |
| /*Enable/disable 802.11b mode on 5111 |
| (enable 2111 frequency converter + CCK)*/ |
| if (ah->ah_radio == AR5K_RF5111) { |
| if (mode == AR5K_MODE_11B) |
| AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, |
| AR5K_TXCFG_B_MODE); |
| else |
| AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, |
| AR5K_TXCFG_B_MODE); |
| } |
| |
| /* |
| * Set channel and calibrate the PHY |
| */ |
| ret = ath5k_hw_channel(ah, channel); |
| if (ret) |
| return ret; |
| |
| /* Set antenna mode */ |
| AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x44), |
| ah->ah_antenna[ee_mode][0], 0xfffffc06); |
| |
| /* |
| * In case a fixed antenna was set as default |
| * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE |
| * registers. |
| */ |
| if (s_ant != 0){ |
| if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */ |
| ant[0] = ant[1] = AR5K_ANT_FIXED_A; |
| else /* 2 - Aux */ |
| ant[0] = ant[1] = AR5K_ANT_FIXED_B; |
| } else { |
| ant[0] = AR5K_ANT_FIXED_A; |
| ant[1] = AR5K_ANT_FIXED_B; |
| } |
| |
| ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]], |
| AR5K_PHY_ANT_SWITCH_TABLE_0); |
| ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]], |
| AR5K_PHY_ANT_SWITCH_TABLE_1); |
| |
| /* Commit values from EEPROM */ |
| if (ah->ah_radio == AR5K_RF5111) |
| AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL, |
| AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip); |
| |
| ath5k_hw_reg_write(ah, |
| AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]), |
| AR5K_PHY(0x5a)); |
| |
| AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x11), |
| (ee->ee_switch_settling[ee_mode] << 7) & 0x3f80, |
| 0xffffc07f); |
| AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x12), |
| (ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000, |
| 0xfffc0fff); |
| AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x14), |
| (ee->ee_adc_desired_size[ee_mode] & 0x00ff) | |
| ((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00), |
| 0xffff0000); |
| |
| ath5k_hw_reg_write(ah, |
| (ee->ee_tx_end2xpa_disable[ee_mode] << 24) | |
| (ee->ee_tx_end2xpa_disable[ee_mode] << 16) | |
| (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) | |
| (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY(0x0d)); |
| |
| AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x0a), |
| ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff); |
| AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x19), |
| (ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff); |
| AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x49), 4, 0xffffff01); |
| |
| AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, |
| AR5K_PHY_IQ_CORR_ENABLE | |
| (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) | |
| ee->ee_q_cal[ee_mode]); |
| |
| if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) |
| AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, |
| AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, |
| ee->ee_margin_tx_rx[ee_mode]); |
| |
| } else { |
| mdelay(1); |
| /* Disable phy and wait */ |
| ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); |
| mdelay(1); |
| } |
| |
| /* |
| * Restore saved values |
| */ |
| /*DCU/Antenna selection not available on 5210*/ |
| if (ah->ah_version != AR5K_AR5210) { |
| ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0)); |
| ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA); |
| } |
| AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]); |
| ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR); |
| ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO); |
| |
| /* |
| * Misc |
| */ |
| /* XXX: add ah->aid once mac80211 gives this to us */ |
| ath5k_hw_set_associd(ah, ah->ah_bssid, 0); |
| |
| ath5k_hw_set_opmode(ah); |
| /*PISR/SISR Not available on 5210*/ |
| if (ah->ah_version != AR5K_AR5210) { |
| ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR); |
| /* If we later allow tuning for this, store into sc structure */ |
| data = AR5K_TUNE_RSSI_THRES | |
| AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S; |
| ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR); |
| } |
| |
| /* |
| * Set Rx/Tx DMA Configuration |
| * |
| * Set maximum DMA size (512) except for PCI-E cards since |
| * it causes rx overruns and tx errors (tested on 5424 but since |
| * rx overruns also occur on 5416/5418 with madwifi we set 128 |
| * for all PCI-E cards to be safe). |
| * |
| * In dumps this is 128 for allchips. |
| * |
| * XXX: need to check 5210 for this |
| * TODO: Check out tx triger level, it's always 64 on dumps but I |
| * guess we can tweak it and see how it goes ;-) |
| */ |
| dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B; |
| if (ah->ah_version != AR5K_AR5210) { |
| AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, |
| AR5K_TXCFG_SDMAMR, dma_size); |
| AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, |
| AR5K_RXCFG_SDMAMW, dma_size); |
| } |
| |
| /* |
| * Enable the PHY and wait until completion |
| */ |
| ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); |
| |
| /* |
| * 5111/5112 Specific |
| */ |
| if (ah->ah_version != AR5K_AR5210) { |
| data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & |
| AR5K_PHY_RX_DELAY_M; |
| data = (channel->hw_value & CHANNEL_CCK) ? |
| ((data << 2) / 22) : (data / 10); |
| |
| udelay(100 + data); |
| } else { |
| mdelay(1); |
| } |
| |
| /* |
| * Enable calibration and wait until completion |
| */ |
| AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, |
| AR5K_PHY_AGCCTL_CAL); |
| |
| if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, |
| AR5K_PHY_AGCCTL_CAL, 0, false)) { |
| ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n", |
| channel->center_freq); |
| return -EAGAIN; |
| } |
| |
| ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq); |
| if (ret) |
| return ret; |
| |
| ah->ah_calibration = false; |
| |
| /* A and G modes can use QAM modulation which requires enabling |
| * I and Q calibration. Don't bother in B mode. */ |
| if (!(mode == AR5K_MODE_11B)) { |
| ah->ah_calibration = true; |
| AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, |
| AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); |
| AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, |
| AR5K_PHY_IQ_RUN); |
| } |
| |
| /* |
| * Reset queues and start beacon timers at the end of the reset routine |
| */ |
| for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) { |
| /*No QCU on 5210*/ |
| if (ah->ah_version != AR5K_AR5210) |
| AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i); |
| |
| ret = ath5k_hw_reset_tx_queue(ah, i); |
| if (ret) { |
| ATH5K_ERR(ah->ah_sc, |
| "failed to reset TX queue #%d\n", i); |
| return ret; |
| } |
| } |
| |
| /* Pre-enable interrupts on 5211/5212*/ |
| if (ah->ah_version != AR5K_AR5210) |
| ath5k_hw_set_intr(ah, AR5K_INT_RX | AR5K_INT_TX | |
| AR5K_INT_FATAL); |
| |
| /* |
| * Set RF kill flags if supported by the device (read from the EEPROM) |
| * Disable gpio_intr for now since it results system hang. |
| * TODO: Handle this in ath5k_intr |
| */ |
| #if 0 |
| if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) { |
| ath5k_hw_set_gpio_input(ah, 0); |
| ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0); |
| if (ah->ah_gpio[0] == 0) |
| ath5k_hw_set_gpio_intr(ah, 0, 1); |
| else |
| ath5k_hw_set_gpio_intr(ah, 0, 0); |
| } |
| #endif |
| |
| /* |
| * Set the 32MHz reference clock on 5212 phy clock sleep register |
| * |
| * TODO: Find out how to switch to external 32Khz clock to save power |
| */ |
| if (ah->ah_version == AR5K_AR5212) { |
| ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR); |
| ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); |
| ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL); |
| ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); |
| ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); |
| ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING); |
| } |
| |
| if (ah->ah_version == AR5K_AR5212) { |
| ath5k_hw_reg_write(ah, 0x000100aa, 0x8118); |
| ath5k_hw_reg_write(ah, 0x00003210, 0x811c); |
| ath5k_hw_reg_write(ah, 0x00000052, 0x8108); |
| if (ah->ah_mac_srev >= AR5K_SREV_VER_AR2413) |
| ath5k_hw_reg_write(ah, 0x00000004, 0x8120); |
| } |
| |
| /* |
| * Disable beacons and reset the register |
| */ |
| AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE | |
| AR5K_BEACON_RESET_TSF); |
| |
| return 0; |
| } |
| |
| /* |
| * Reset chipset |
| */ |
| static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) |
| { |
| int ret; |
| u32 mask = val ? val : ~0U; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| |
| /* Read-and-clear RX Descriptor Pointer*/ |
| ath5k_hw_reg_read(ah, AR5K_RXDP); |
| |
| /* |
| * Reset the device and wait until success |
| */ |
| ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL); |
| |
| /* Wait at least 128 PCI clocks */ |
| udelay(15); |
| |
| if (ah->ah_version == AR5K_AR5210) { |
| val &= AR5K_RESET_CTL_CHIP; |
| mask &= AR5K_RESET_CTL_CHIP; |
| } else { |
| val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; |
| mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; |
| } |
| |
| ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false); |
| |
| /* |
| * Reset configuration register (for hw byte-swap). Note that this |
| * is only set for big endian. We do the necessary magic in |
| * AR5K_INIT_CFG. |
| */ |
| if ((val & AR5K_RESET_CTL_PCU) == 0) |
| ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); |
| |
| return ret; |
| } |
| |
| /* |
| * Power management functions |
| */ |
| |
| /* |
| * Sleep control |
| */ |
| int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, |
| bool set_chip, u16 sleep_duration) |
| { |
| unsigned int i; |
| u32 staid; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1); |
| |
| switch (mode) { |
| case AR5K_PM_AUTO: |
| staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA; |
| /* fallthrough */ |
| case AR5K_PM_NETWORK_SLEEP: |
| if (set_chip) |
| ath5k_hw_reg_write(ah, |
| AR5K_SLEEP_CTL_SLE | sleep_duration, |
| AR5K_SLEEP_CTL); |
| |
| staid |= AR5K_STA_ID1_PWR_SV; |
| break; |
| |
| case AR5K_PM_FULL_SLEEP: |
| if (set_chip) |
| ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP, |
| AR5K_SLEEP_CTL); |
| |
| staid |= AR5K_STA_ID1_PWR_SV; |
| break; |
| |
| case AR5K_PM_AWAKE: |
| if (!set_chip) |
| goto commit; |
| |
| ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE, |
| AR5K_SLEEP_CTL); |
| |
| for (i = 5000; i > 0; i--) { |
| /* Check if the chip did wake up */ |
| if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & |
| AR5K_PCICFG_SPWR_DN) == 0) |
| break; |
| |
| /* Wait a bit and retry */ |
| udelay(200); |
| ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE, |
| AR5K_SLEEP_CTL); |
| } |
| |
| /* Fail if the chip didn't wake up */ |
| if (i <= 0) |
| return -EIO; |
| |
| staid &= ~AR5K_STA_ID1_PWR_SV; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| commit: |
| ah->ah_power_mode = mode; |
| ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1); |
| |
| return 0; |
| } |
| |
| /***********************\ |
| DMA Related Functions |
| \***********************/ |
| |
| /* |
| * Receive functions |
| */ |
| |
| /* |
| * Start DMA receive |
| */ |
| void ath5k_hw_start_rx(struct ath5k_hw *ah) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); |
| } |
| |
| /* |
| * Stop DMA receive |
| */ |
| int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) |
| { |
| unsigned int i; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR); |
| |
| /* |
| * It may take some time to disable the DMA receive unit |
| */ |
| for (i = 2000; i > 0 && |
| (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0; |
| i--) |
| udelay(10); |
| |
| return i ? 0 : -EBUSY; |
| } |
| |
| /* |
| * Get the address of the RX Descriptor |
| */ |
| u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah) |
| { |
| return ath5k_hw_reg_read(ah, AR5K_RXDP); |
| } |
| |
| /* |
| * Set the address of the RX Descriptor |
| */ |
| void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| |
| /*TODO:Shouldn't we check if RX is enabled first ?*/ |
| ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP); |
| } |
| |
| /* |
| * Transmit functions |
| */ |
| |
| /* |
| * Start DMA transmit for a specific queue |
| * (see also QCU/DCU functions) |
| */ |
| int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue) |
| { |
| u32 tx_queue; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); |
| |
| /* Return if queue is declared inactive */ |
| if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) |
| return -EIO; |
| |
| if (ah->ah_version == AR5K_AR5210) { |
| tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); |
| |
| /* |
| * Set the queue by type on 5210 |
| */ |
| switch (ah->ah_txq[queue].tqi_type) { |
| case AR5K_TX_QUEUE_DATA: |
| tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0; |
| break; |
| case AR5K_TX_QUEUE_BEACON: |
| tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; |
| ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, |
| AR5K_BSR); |
| break; |
| case AR5K_TX_QUEUE_CAB: |
| tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; |
| ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V | |
| AR5K_BCR_BDMAE, AR5K_BSR); |
| break; |
| default: |
| return -EINVAL; |
| } |
| /* Start queue */ |
| ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); |
| } else { |
| /* Return if queue is disabled */ |
| if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue)) |
| return -EIO; |
| |
| /* Start queue */ |
| AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Stop DMA transmit for a specific queue |
| * (see also QCU/DCU functions) |
| */ |
| int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) |
| { |
| unsigned int i = 100; |
| u32 tx_queue, pending; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); |
| |
| /* Return if queue is declared inactive */ |
| if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) |
| return -EIO; |
| |
| if (ah->ah_version == AR5K_AR5210) { |
| tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); |
| |
| /* |
| * Set by queue type |
| */ |
| switch (ah->ah_txq[queue].tqi_type) { |
| case AR5K_TX_QUEUE_DATA: |
| tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0; |
| break; |
| case AR5K_TX_QUEUE_BEACON: |
| case AR5K_TX_QUEUE_CAB: |
| /* XXX Fix me... */ |
| tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1; |
| ath5k_hw_reg_write(ah, 0, AR5K_BSR); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* Stop queue */ |
| ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); |
| } else { |
| /* |
| * Schedule TX disable and wait until queue is empty |
| */ |
| AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue); |
| |
| /*Check for pending frames*/ |
| do { |
| pending = ath5k_hw_reg_read(ah, |
| AR5K_QUEUE_STATUS(queue)) & |
| AR5K_QCU_STS_FRMPENDCNT; |
| udelay(100); |
| } while (--i && pending); |
| |
| /* Clear register */ |
| ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD); |
| } |
| |
| /* TODO: Check for success else return error */ |
| return 0; |
| } |
| |
| /* |
| * Get the address of the TX Descriptor for a specific queue |
| * (see also QCU/DCU functions) |
| */ |
| u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue) |
| { |
| u16 tx_reg; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); |
| |
| /* |
| * Get the transmit queue descriptor pointer from the selected queue |
| */ |
| /*5210 doesn't have QCU*/ |
| if (ah->ah_version == AR5K_AR5210) { |
| switch (ah->ah_txq[queue].tqi_type) { |
| case AR5K_TX_QUEUE_DATA: |
| tx_reg = AR5K_NOQCU_TXDP0; |
| break; |
| case AR5K_TX_QUEUE_BEACON: |
| case AR5K_TX_QUEUE_CAB: |
| tx_reg = AR5K_NOQCU_TXDP1; |
| break; |
| default: |
| return 0xffffffff; |
| } |
| } else { |
| tx_reg = AR5K_QUEUE_TXDP(queue); |
| } |
| |
| return ath5k_hw_reg_read(ah, tx_reg); |
| } |
| |
| /* |
| * Set the address of the TX Descriptor for a specific queue |
| * (see also QCU/DCU functions) |
| */ |
| int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) |
| { |
| u16 tx_reg; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); |
| |
| /* |
| * Set the transmit queue descriptor pointer register by type |
| * on 5210 |
| */ |
| if (ah->ah_version == AR5K_AR5210) { |
| switch (ah->ah_txq[queue].tqi_type) { |
| case AR5K_TX_QUEUE_DATA: |
| tx_reg = AR5K_NOQCU_TXDP0; |
| break; |
| case AR5K_TX_QUEUE_BEACON: |
| case AR5K_TX_QUEUE_CAB: |
| tx_reg = AR5K_NOQCU_TXDP1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| } else { |
| /* |
| * Set the transmit queue descriptor pointer for |
| * the selected queue on QCU for 5211+ |
| * (this won't work if the queue is still active) |
| */ |
| if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) |
| return -EIO; |
| |
| tx_reg = AR5K_QUEUE_TXDP(queue); |
| } |
| |
| /* Set descriptor pointer */ |
| ath5k_hw_reg_write(ah, phys_addr, tx_reg); |
| |
| return 0; |
| } |
| |
| /* |
| * Update tx trigger level |
| */ |
| int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase) |
| { |
| u32 trigger_level, imr; |
| int ret = -EIO; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| |
| /* |
| * Disable interrupts by setting the mask |
| */ |
| imr = ath5k_hw_set_intr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL); |
| |
| /*TODO: Boundary check on trigger_level*/ |
| trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG), |
| AR5K_TXCFG_TXFULL); |
| |
| if (!increase) { |
| if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES) |
| goto done; |
| } else |
| trigger_level += |
| ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2); |
| |
| /* |
| * Update trigger level on success |
| */ |
| if (ah->ah_version == AR5K_AR5210) |
| ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL); |
| else |
| AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, |
| AR5K_TXCFG_TXFULL, trigger_level); |
| |
| ret = 0; |
| |
| done: |
| /* |
| * Restore interrupt mask |
| */ |
| ath5k_hw_set_intr(ah, imr); |
| |
| return ret; |
| } |
| |
| /* |
| * Interrupt handling |
| */ |
| |
| /* |
| * Check if we have pending interrupts |
| */ |
| bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| return ath5k_hw_reg_read(ah, AR5K_INTPEND); |
| } |
| |
| /* |
| * Get interrupt mask (ISR) |
| */ |
| int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) |
| { |
| u32 data; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| |
| /* |
| * Read interrupt status from the Interrupt Status register |
| * on 5210 |
| */ |
| if (ah->ah_version == AR5K_AR5210) { |
| data = ath5k_hw_reg_read(ah, AR5K_ISR); |
| if (unlikely(data == AR5K_INT_NOCARD)) { |
| *interrupt_mask = data; |
| return -ENODEV; |
| } |
| } else { |
| /* |
| * Read interrupt status from the Read-And-Clear shadow register |
| * Note: PISR/SISR Not available on 5210 |
| */ |
| data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR); |
| } |
| |
| /* |
| * Get abstract interrupt mask (driver-compatible) |
| */ |
| *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr; |
| |
| if (unlikely(data == AR5K_INT_NOCARD)) |
| return -ENODEV; |
| |
| if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR)) |
| *interrupt_mask |= AR5K_INT_RX; |
| |
| if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR |
| | AR5K_ISR_TXDESC | AR5K_ISR_TXEOL)) |
| *interrupt_mask |= AR5K_INT_TX; |
| |
| if (ah->ah_version != AR5K_AR5210) { |
| /*HIU = Host Interface Unit (PCI etc)*/ |
| if (unlikely(data & (AR5K_ISR_HIUERR))) |
| *interrupt_mask |= AR5K_INT_FATAL; |
| |
| /*Beacon Not Ready*/ |
| if (unlikely(data & (AR5K_ISR_BNR))) |
| *interrupt_mask |= AR5K_INT_BNR; |
| } |
| |
| /* |
| * XXX: BMISS interrupts may occur after association. |
| * I found this on 5210 code but it needs testing. If this is |
| * true we should disable them before assoc and re-enable them |
| * after a successfull assoc + some jiffies. |
| */ |
| #if 0 |
| interrupt_mask &= ~AR5K_INT_BMISS; |
| #endif |
| |
| /* |
| * In case we didn't handle anything, |
| * print the register value. |
| */ |
| if (unlikely(*interrupt_mask == 0 && net_ratelimit())) |
| ATH5K_PRINTF("0x%08x\n", data); |
| |
| return 0; |
| } |
| |
| /* |
| * Set interrupt mask |
| */ |
| enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask) |
| { |
| enum ath5k_int old_mask, int_mask; |
| |
| /* |
| * Disable card interrupts to prevent any race conditions |
| * (they will be re-enabled afterwards). |
| */ |
| ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); |
| |
| old_mask = ah->ah_imr; |
| |
| /* |
| * Add additional, chipset-dependent interrupt mask flags |
| * and write them to the IMR (interrupt mask register). |
| */ |
| int_mask = new_mask & AR5K_INT_COMMON; |
| |
| if (new_mask & AR5K_INT_RX) |
| int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN | |
| AR5K_IMR_RXDESC; |
| |
| if (new_mask & AR5K_INT_TX) |
| int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC | |
| AR5K_IMR_TXURN; |
| |
| if (ah->ah_version != AR5K_AR5210) { |
| if (new_mask & AR5K_INT_FATAL) { |
| int_mask |= AR5K_IMR_HIUERR; |
| AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT | |
| AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR); |
| } |
| } |
| |
| ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); |
| |
| /* Store new interrupt mask */ |
| ah->ah_imr = new_mask; |
| |
| /* ..re-enable interrupts */ |
| ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER); |
| |
| return old_mask; |
| } |
| |
| |
| /*************************\ |
| EEPROM access functions |
| \*************************/ |
| |
| /* |
| * Read from eeprom |
| */ |
| static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data) |
| { |
| u32 status, timeout; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| /* |
| * Initialize EEPROM access |
| */ |
| if (ah->ah_version == AR5K_AR5210) { |
| AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); |
| (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset)); |
| } else { |
| ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); |
| AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, |
| AR5K_EEPROM_CMD_READ); |
| } |
| |
| for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { |
| status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); |
| if (status & AR5K_EEPROM_STAT_RDDONE) { |
| if (status & AR5K_EEPROM_STAT_RDERR) |
| return -EIO; |
| *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) & |
| 0xffff); |
| return 0; |
| } |
| udelay(15); |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| /* |
| * Write to eeprom - currently disabled, use at your own risk |
| */ |
| #if 0 |
| static int ath5k_hw_eeprom_write(struct ath5k_hw *ah, u32 offset, u16 data) |
| { |
| |
| u32 status, timeout; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| |
| /* |
| * Initialize eeprom access |
| */ |
| |
| if (ah->ah_version == AR5K_AR5210) { |
| AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); |
| } else { |
| AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, |
| AR5K_EEPROM_CMD_RESET); |
| } |
| |
| /* |
| * Write data to data register |
| */ |
| |
| if (ah->ah_version == AR5K_AR5210) { |
| ath5k_hw_reg_write(ah, data, AR5K_EEPROM_BASE + (4 * offset)); |
| } else { |
| ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); |
| ath5k_hw_reg_write(ah, data, AR5K_EEPROM_DATA); |
| AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, |
| AR5K_EEPROM_CMD_WRITE); |
| } |
| |
| /* |
| * Check status |
| */ |
| |
| for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { |
| status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); |
| if (status & AR5K_EEPROM_STAT_WRDONE) { |
| if (status & AR5K_EEPROM_STAT_WRERR) |
| return EIO; |
| return 0; |
| } |
| udelay(15); |
| } |
| |
| ATH5K_ERR(ah->ah_sc, "EEPROM Write is disabled!"); |
| return -EIO; |
| } |
| #endif |
| |
| /* |
| * Translate binary channel representation in EEPROM to frequency |
| */ |
| static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin, unsigned int mode) |
| { |
| u16 val; |
| |
| if (bin == AR5K_EEPROM_CHANNEL_DIS) |
| return bin; |
| |
| if (mode == AR5K_EEPROM_MODE_11A) { |
| if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) |
| val = (5 * bin) + 4800; |
| else |
| val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 : |
| (bin * 10) + 5100; |
| } else { |
| if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) |
| val = bin + 2300; |
| else |
| val = bin + 2400; |
| } |
| |
| return val; |
| } |
| |
| /* |
| * Read antenna infos from eeprom |
| */ |
| static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, |
| unsigned int mode) |
| { |
| struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; |
| u32 o = *offset; |
| u16 val; |
| int ret, i = 0; |
| |
| AR5K_EEPROM_READ(o++, val); |
| ee->ee_switch_settling[mode] = (val >> 8) & 0x7f; |
| ee->ee_ant_tx_rx[mode] = (val >> 2) & 0x3f; |
| ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; |
| |
| AR5K_EEPROM_READ(o++, val); |
| ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; |
| ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; |
| ee->ee_ant_control[mode][i++] = val & 0x3f; |
| |
| AR5K_EEPROM_READ(o++, val); |
| ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f; |
| ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f; |
| ee->ee_ant_control[mode][i] = (val << 2) & 0x3f; |
| |
| AR5K_EEPROM_READ(o++, val); |
| ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3; |
| ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f; |
| ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f; |
| ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; |
| |
| AR5K_EEPROM_READ(o++, val); |
| ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; |
| ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; |
| ee->ee_ant_control[mode][i++] = val & 0x3f; |
| |
| /* Get antenna modes */ |
| ah->ah_antenna[mode][0] = |
| (ee->ee_ant_control[mode][0] << 4) | 0x1; |
| ah->ah_antenna[mode][AR5K_ANT_FIXED_A] = |
| ee->ee_ant_control[mode][1] | |
| (ee->ee_ant_control[mode][2] << 6) | |
| (ee->ee_ant_control[mode][3] << 12) | |
| (ee->ee_ant_control[mode][4] << 18) | |
| (ee->ee_ant_control[mode][5] << 24); |
| ah->ah_antenna[mode][AR5K_ANT_FIXED_B] = |
| ee->ee_ant_control[mode][6] | |
| (ee->ee_ant_control[mode][7] << 6) | |
| (ee->ee_ant_control[mode][8] << 12) | |
| (ee->ee_ant_control[mode][9] << 18) | |
| (ee->ee_ant_control[mode][10] << 24); |
| |
| /* return new offset */ |
| *offset = o; |
| |
| return 0; |
| } |
| |
| /* |
| * Read supported modes from eeprom |
| */ |
| static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, |
| unsigned int mode) |
| { |
| struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; |
| u32 o = *offset; |
| u16 val; |
| int ret; |
| |
| AR5K_EEPROM_READ(o++, val); |
| ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff; |
| ee->ee_thr_62[mode] = val & 0xff; |
| |
| if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) |
| ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28; |
| |
| AR5K_EEPROM_READ(o++, val); |
| ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff; |
| ee->ee_tx_frm2xpa_enable[mode] = val & 0xff; |
| |
| AR5K_EEPROM_READ(o++, val); |
| ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff; |
| |
| if ((val & 0xff) & 0x80) |
| ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1); |
| else |
| ee->ee_noise_floor_thr[mode] = val & 0xff; |
| |
| if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) |
| ee->ee_noise_floor_thr[mode] = |
| mode == AR5K_EEPROM_MODE_11A ? -54 : -1; |
| |
| AR5K_EEPROM_READ(o++, val); |
| ee->ee_xlna_gain[mode] = (val >> 5) & 0xff; |
| ee->ee_x_gain[mode] = (val >> 1) & 0xf; |
| ee->ee_xpd[mode] = val & 0x1; |
| |
| if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) |
| ee->ee_fixed_bias[mode] = (val >> 13) & 0x1; |
| |
| if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) { |
| AR5K_EEPROM_READ(o++, val); |
| ee->ee_false_detect[mode] = (val >> 6) & 0x7f; |
| |
| if (mode == AR5K_EEPROM_MODE_11A) |
| ee->ee_xr_power[mode] = val & 0x3f; |
| else { |
| ee->ee_ob[mode][0] = val & 0x7; |
| ee->ee_db[mode][0] = (val >> 3) & 0x7; |
| } |
| } |
| |
| if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) { |
| ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN; |
| ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA; |
| } else { |
| ee->ee_i_gain[mode] = (val >> 13) & 0x7; |
| |
| AR5K_EEPROM_READ(o++, val); |
| ee->ee_i_gain[mode] |= (val << 3) & 0x38; |
| |
| if (mode == AR5K_EEPROM_MODE_11G) |
| ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff; |
| } |
| |
| if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 && |
| mode == AR5K_EEPROM_MODE_11A) { |
| ee->ee_i_cal[mode] = (val >> 8) & 0x3f; |
| ee->ee_q_cal[mode] = (val >> 3) & 0x1f; |
| } |
| |
| if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6 && |
| mode == AR5K_EEPROM_MODE_11G) |
| ee->ee_scaled_cck_delta = (val >> 11) & 0x1f; |
| |
| /* return new offset */ |
| *offset = o; |
| |
| return 0; |
| } |
| |
| /* |
| * Initialize eeprom & capabilities structs |
| */ |
| static int ath5k_eeprom_init(struct ath5k_hw *ah) |
| { |
| struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; |
| unsigned int mode, i; |
| int ret; |
| u32 offset; |
| u16 val; |
| |
| /* Initial TX thermal adjustment values */ |
| ee->ee_tx_clip = 4; |
| ee->ee_pwd_84 = ee->ee_pwd_90 = 1; |
| ee->ee_gain_select = 1; |
| |
| /* |
| * Read values from EEPROM and store them in the capability structure |
| */ |
| AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic); |
| AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect); |
| AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain); |
| AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version); |
| AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header); |
| |
| /* Return if we have an old EEPROM */ |
| if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0) |
| return 0; |
| |
| #ifdef notyet |
| /* |
| * Validate the checksum of the EEPROM date. There are some |
| * devices with invalid EEPROMs. |
| */ |
| for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) { |
| AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val); |
| cksum ^= val; |
| } |
| if (cksum != AR5K_EEPROM_INFO_CKSUM) { |
| ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum); |
| return -EIO; |
| } |
| #endif |
| |
| AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version), |
| ee_ant_gain); |
| |
| if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { |
| AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0); |
| AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1); |
| } |
| |
| if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) { |
| AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val); |
| ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7; |
| ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7; |
| |
| AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val); |
| ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7; |
| ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7; |
| } |
| |
| /* |
| * Get conformance test limit values |
| */ |
| offset = AR5K_EEPROM_CTL(ah->ah_ee_version); |
| ee->ee_ctls = AR5K_EEPROM_N_CTLS(ah->ah_ee_version); |
| |
| for (i = 0; i < ee->ee_ctls; i++) { |
| AR5K_EEPROM_READ(offset++, val); |
| ee->ee_ctl[i] = (val >> 8) & 0xff; |
| ee->ee_ctl[i + 1] = val & 0xff; |
| } |
| |
| /* |
| * Get values for 802.11a (5GHz) |
| */ |
| mode = AR5K_EEPROM_MODE_11A; |
| |
| ee->ee_turbo_max_power[mode] = |
| AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header); |
| |
| offset = AR5K_EEPROM_MODES_11A(ah->ah_ee_version); |
| |
| ret = ath5k_eeprom_read_ants(ah, &offset, mode); |
| if (ret) |
| return ret; |
| |
| AR5K_EEPROM_READ(offset++, val); |
| ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); |
| ee->ee_ob[mode][3] = (val >> 5) & 0x7; |
| ee->ee_db[mode][3] = (val >> 2) & 0x7; |
| ee->ee_ob[mode][2] = (val << 1) & 0x7; |
| |
| AR5K_EEPROM_READ(offset++, val); |
| ee->ee_ob[mode][2] |= (val >> 15) & 0x1; |
| ee->ee_db[mode][2] = (val >> 12) & 0x7; |
| ee->ee_ob[mode][1] = (val >> 9) & 0x7; |
| ee->ee_db[mode][1] = (val >> 6) & 0x7; |
| ee->ee_ob[mode][0] = (val >> 3) & 0x7; |
| ee->ee_db[mode][0] = val & 0x7; |
| |
| ret = ath5k_eeprom_read_modes(ah, &offset, mode); |
| if (ret) |
| return ret; |
| |
| if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) { |
| AR5K_EEPROM_READ(offset++, val); |
| ee->ee_margin_tx_rx[mode] = val & 0x3f; |
| } |
| |
| /* |
| * Get values for 802.11b (2.4GHz) |
| */ |
| mode = AR5K_EEPROM_MODE_11B; |
| offset = AR5K_EEPROM_MODES_11B(ah->ah_ee_version); |
| |
| ret = ath5k_eeprom_read_ants(ah, &offset, mode); |
| if (ret) |
| return ret; |
| |
| AR5K_EEPROM_READ(offset++, val); |
| ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); |
| ee->ee_ob[mode][1] = (val >> 4) & 0x7; |
| ee->ee_db[mode][1] = val & 0x7; |
| |
| ret = ath5k_eeprom_read_modes(ah, &offset, mode); |
| if (ret) |
| return ret; |
| |
| if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { |
| AR5K_EEPROM_READ(offset++, val); |
| ee->ee_cal_pier[mode][0] = |
| ath5k_eeprom_bin2freq(ah, val & 0xff, mode); |
| ee->ee_cal_pier[mode][1] = |
| ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); |
| |
| AR5K_EEPROM_READ(offset++, val); |
| ee->ee_cal_pier[mode][2] = |
| ath5k_eeprom_bin2freq(ah, val & 0xff, mode); |
| } |
| |
| if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) |
| ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; |
| |
| /* |
| * Get values for 802.11g (2.4GHz) |
| */ |
| mode = AR5K_EEPROM_MODE_11G; |
| offset = AR5K_EEPROM_MODES_11G(ah->ah_ee_version); |
| |
| ret = ath5k_eeprom_read_ants(ah, &offset, mode); |
| if (ret) |
| return ret; |
| |
| AR5K_EEPROM_READ(offset++, val); |
| ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); |
| ee->ee_ob[mode][1] = (val >> 4) & 0x7; |
| ee->ee_db[mode][1] = val & 0x7; |
| |
| ret = ath5k_eeprom_read_modes(ah, &offset, mode); |
| if (ret) |
| return ret; |
| |
| if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { |
| AR5K_EEPROM_READ(offset++, val); |
| ee->ee_cal_pier[mode][0] = |
| ath5k_eeprom_bin2freq(ah, val & 0xff, mode); |
| ee->ee_cal_pier[mode][1] = |
| ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); |
| |
| AR5K_EEPROM_READ(offset++, val); |
| ee->ee_turbo_max_power[mode] = val & 0x7f; |
| ee->ee_xr_power[mode] = (val >> 7) & 0x3f; |
| |
| AR5K_EEPROM_READ(offset++, val); |
| ee->ee_cal_pier[mode][2] = |
| ath5k_eeprom_bin2freq(ah, val & 0xff, mode); |
| |
| if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) |
| ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; |
| |
| AR5K_EEPROM_READ(offset++, val); |
| ee->ee_i_cal[mode] = (val >> 8) & 0x3f; |
| ee->ee_q_cal[mode] = (val >> 3) & 0x1f; |
| |
| if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) { |
| AR5K_EEPROM_READ(offset++, val); |
| ee->ee_cck_ofdm_gain_delta = val & 0xff; |
| } |
| } |
| |
| /* |
| * Read 5GHz EEPROM channels |
| */ |
| |
| return 0; |
| } |
| |
| /* |
| * Read the MAC address from eeprom |
| */ |
| static int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) |
| { |
| u8 mac_d[ETH_ALEN]; |
| u32 total, offset; |
| u16 data; |
| int octet, ret; |
| |
| memset(mac, 0, ETH_ALEN); |
| memset(mac_d, 0, ETH_ALEN); |
| |
| ret = ath5k_hw_eeprom_read(ah, 0x20, &data); |
| if (ret) |
| return ret; |
| |
| for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { |
| ret = ath5k_hw_eeprom_read(ah, offset, &data); |
| if (ret) |
| return ret; |
| |
| total += data; |
| mac_d[octet + 1] = data & 0xff; |
| mac_d[octet] = data >> 8; |
| octet += 2; |
| } |
| |
| memcpy(mac, mac_d, ETH_ALEN); |
| |
| if (!total || total == 3 * 0xffff) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /* |
| * Fill the capabilities struct |
| */ |
| static int ath5k_hw_get_capabilities(struct ath5k_hw *ah) |
| { |
| u16 ee_header; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| /* Capabilities stored in the EEPROM */ |
| ee_header = ah->ah_capabilities.cap_eeprom.ee_header; |
| |
| if (ah->ah_version == AR5K_AR5210) { |
| /* |
| * Set radio capabilities |
| * (The AR5110 only supports the middle 5GHz band) |
| */ |
| ah->ah_capabilities.cap_range.range_5ghz_min = 5120; |
| ah->ah_capabilities.cap_range.range_5ghz_max = 5430; |
| ah->ah_capabilities.cap_range.range_2ghz_min = 0; |
| ah->ah_capabilities.cap_range.range_2ghz_max = 0; |
| |
| /* Set supported modes */ |
| __set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode); |
| __set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode); |
| } else { |
| /* |
| * XXX The tranceiver supports frequencies from 4920 to 6100GHz |
| * XXX and from 2312 to 2732GHz. There are problems with the |
| * XXX current ieee80211 implementation because the IEEE |
| * XXX channel mapping does not support negative channel |
| * XXX numbers (2312MHz is channel -19). Of course, this |
| * XXX doesn't matter because these channels are out of range |
| * XXX but some regulation domains like MKK (Japan) will |
| * XXX support frequencies somewhere around 4.8GHz. |
| */ |
| |
| /* |
| * Set radio capabilities |
| */ |
| |
| if (AR5K_EEPROM_HDR_11A(ee_header)) { |
| ah->ah_capabilities.cap_range.range_5ghz_min = 5005; /* 4920 */ |
| ah->ah_capabilities.cap_range.range_5ghz_max = 6100; |
| |
| /* Set supported modes */ |
| __set_bit(AR5K_MODE_11A, |
| ah->ah_capabilities.cap_mode); |
| __set_bit(AR5K_MODE_11A_TURBO, |
| ah->ah_capabilities.cap_mode); |
| if (ah->ah_version == AR5K_AR5212) |
| __set_bit(AR5K_MODE_11G_TURBO, |
| ah->ah_capabilities.cap_mode); |
| } |
| |
| /* Enable 802.11b if a 2GHz capable radio (2111/5112) is |
| * connected */ |
| if (AR5K_EEPROM_HDR_11B(ee_header) || |
| AR5K_EEPROM_HDR_11G(ee_header)) { |
| ah->ah_capabilities.cap_range.range_2ghz_min = 2412; /* 2312 */ |
| ah->ah_capabilities.cap_range.range_2ghz_max = 2732; |
| |
| if (AR5K_EEPROM_HDR_11B(ee_header)) |
| __set_bit(AR5K_MODE_11B, |
| ah->ah_capabilities.cap_mode); |
| |
| if (AR5K_EEPROM_HDR_11G(ee_header)) |
| __set_bit(AR5K_MODE_11G, |
| ah->ah_capabilities.cap_mode); |
| } |
| } |
| |
| /* GPIO */ |
| ah->ah_gpio_npins = AR5K_NUM_GPIO; |
| |
| /* Set number of supported TX queues */ |
| if (ah->ah_version == AR5K_AR5210) |
| ah->ah_capabilities.cap_queues.q_tx_num = |
| AR5K_NUM_TX_QUEUES_NOQCU; |
| else |
| ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES; |
| |
| return 0; |
| } |
| |
| /*********************************\ |
| Protocol Control Unit Functions |
| \*********************************/ |
| |
| /* |
| * Set Operation mode |
| */ |
| int ath5k_hw_set_opmode(struct ath5k_hw *ah) |
| { |
| u32 pcu_reg, beacon_reg, low_id, high_id; |
| |
| pcu_reg = 0; |
| beacon_reg = 0; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| |
| switch (ah->ah_op_mode) { |
| case IEEE80211_IF_TYPE_IBSS: |
| pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA | |
| (ah->ah_version == AR5K_AR5210 ? |
| AR5K_STA_ID1_NO_PSPOLL : 0); |
| beacon_reg |= AR5K_BCR_ADHOC; |
| break; |
| |
| case IEEE80211_IF_TYPE_AP: |
| pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA | |
| (ah->ah_version == AR5K_AR5210 ? |
| AR5K_STA_ID1_NO_PSPOLL : 0); |
| beacon_reg |= AR5K_BCR_AP; |
| break; |
| |
| case IEEE80211_IF_TYPE_STA: |
| pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA | |
| (ah->ah_version == AR5K_AR5210 ? |
| AR5K_STA_ID1_PWR_SV : 0); |
| case IEEE80211_IF_TYPE_MNTR: |
| pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA | |
| (ah->ah_version == AR5K_AR5210 ? |
| AR5K_STA_ID1_NO_PSPOLL : 0); |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| /* |
| * Set PCU registers |
| */ |
| low_id = AR5K_LOW_ID(ah->ah_sta_id); |
| high_id = AR5K_HIGH_ID(ah->ah_sta_id); |
| ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); |
| ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); |
| |
| /* |
| * Set Beacon Control Register on 5210 |
| */ |
| if (ah->ah_version == AR5K_AR5210) |
| ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); |
| |
| return 0; |
| } |
| |
| /* |
| * BSSID Functions |
| */ |
| |
| /* |
| * Get station id |
| */ |
| void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| memcpy(mac, ah->ah_sta_id, ETH_ALEN); |
| } |
| |
| /* |
| * Set station id |
| */ |
| int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) |
| { |
| u32 low_id, high_id; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| /* Set new station ID */ |
| memcpy(ah->ah_sta_id, mac, ETH_ALEN); |
| |
| low_id = AR5K_LOW_ID(mac); |
| high_id = AR5K_HIGH_ID(mac); |
| |
| ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); |
| ath5k_hw_reg_write(ah, high_id, AR5K_STA_ID1); |
| |
| return 0; |
| } |
| |
| /* |
| * Set BSSID |
| */ |
| void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id) |
| { |
| u32 low_id, high_id; |
| u16 tim_offset = 0; |
| |
| /* |
| * Set simple BSSID mask on 5212 |
| */ |
| if (ah->ah_version == AR5K_AR5212) { |
| ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM0); |
| ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM1); |
| } |
| |
| /* |
| * Set BSSID which triggers the "SME Join" operation |
| */ |
| low_id = AR5K_LOW_ID(bssid); |
| high_id = AR5K_HIGH_ID(bssid); |
| ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0); |
| ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) << |
| AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1); |
| |
| if (assoc_id == 0) { |
| ath5k_hw_disable_pspoll(ah); |
| return; |
| } |
| |
| AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM, |
| tim_offset ? tim_offset + 4 : 0); |
| |
| ath5k_hw_enable_pspoll(ah, NULL, 0); |
| } |
| /** |
| * ath5k_hw_set_bssid_mask - set common bits we should listen to |
| * |
| * The bssid_mask is a utility used by AR5212 hardware to inform the hardware |
| * which bits of the interface's MAC address should be looked at when trying |
| * to decide which packets to ACK. In station mode every bit matters. In AP |
| * mode with a single BSS every bit matters as well. In AP mode with |
| * multiple BSSes not every bit matters. |
| * |
| * @ah: the &struct ath5k_hw |
| * @mask: the bssid_mask, a u8 array of size ETH_ALEN |
| * |
| * Note that this is a simple filter and *does* not filter out all |
| * relevant frames. Some non-relevant frames will get through, probability |
| * jocks are welcomed to compute. |
| * |
| * When handling multiple BSSes (or VAPs) you can get the BSSID mask by |
| * computing the set of: |
| * |
| * ~ ( MAC XOR BSSID ) |
| * |
| * When you do this you are essentially computing the common bits. Later it |
| * is assumed the harware will "and" (&) the BSSID mask with the MAC address |
| * to obtain the relevant bits which should match on the destination frame. |
| * |
| * Simple example: on your card you have have two BSSes you have created with |
| * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address. |
| * There is another BSSID-03 but you are not part of it. For simplicity's sake, |
| * assuming only 4 bits for a mac address and for BSSIDs you can then have: |
| * |
| * \ |
| * MAC: 0001 | |
| * BSSID-01: 0100 | --> Belongs to us |
| * BSSID-02: 1001 | |
| * / |
| * ------------------- |
| * BSSID-03: 0110 | --> External |
| * ------------------- |
| * |
| * Our bssid_mask would then be: |
| * |
| * On loop iteration for BSSID-01: |
| * ~(0001 ^ 0100) -> ~(0101) |
| * -> 1010 |
| * bssid_mask = 1010 |
| * |
| * On loop iteration for BSSID-02: |
| * bssid_mask &= ~(0001 ^ 1001) |
| * bssid_mask = (1010) & ~(0001 ^ 1001) |
| * bssid_mask = (1010) & ~(1001) |
| * bssid_mask = (1010) & (0110) |
| * bssid_mask = 0010 |
| * |
| * A bssid_mask of 0010 means "only pay attention to the second least |
| * significant bit". This is because its the only bit common |
| * amongst the MAC and all BSSIDs we support. To findout what the real |
| * common bit is we can simply "&" the bssid_mask now with any BSSID we have |
| * or our MAC address (we assume the hardware uses the MAC address). |
| * |
| * Now, suppose there's an incoming frame for BSSID-03: |
| * |
| * IFRAME-01: 0110 |
| * |
| * An easy eye-inspeciton of this already should tell you that this frame |
| * will not pass our check. This is beacuse the bssid_mask tells the |
| * hardware to only look at the second least significant bit and the |
| * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB |
| * as 1, which does not match 0. |
| * |
| * So with IFRAME-01 we *assume* the hardware will do: |
| * |
| * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; |
| * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0; |
| * --> allow = (0010) == 0000 ? 1 : 0; |
| * --> allow = 0 |
| * |
| * Lets now test a frame that should work: |
| * |
| * IFRAME-02: 0001 (we should allow) |
| * |
| * allow = (0001 & 1010) == 1010 |
| * |
| * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; |
| * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0; |
| * --> allow = (0010) == (0010) |
| * --> allow = 1 |
| * |
| * Other examples: |
| * |
| * IFRAME-03: 0100 --> allowed |
| * IFRAME-04: 1001 --> allowed |
| * IFRAME-05: 1101 --> allowed but its not for us!!! |
| * |
| */ |
| int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) |
| { |
| u32 low_id, high_id; |
| ATH5K_TRACE(ah->ah_sc); |
| |
| if (ah->ah_version == AR5K_AR5212) { |
| low_id = AR5K_LOW_ID(mask); |
| high_id = AR5K_HIGH_ID(mask); |
| |
| ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0); |
| ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1); |
| |
| return 0; |
| } |
| |
| return -EIO; |
| } |
| |
| /* |
| * Receive start/stop functions |
| */ |
| |
| /* |
| * Start receive on PCU |
| */ |
| void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); |
| |
| /* TODO: ANI Support */ |
| } |
| |
| /* |
| * Stop receive on PCU |
| */ |
| void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); |
| |
| /* TODO: ANI Support */ |
| } |
| |
| /* |
| * RX Filter functions |
| */ |
| |
| /* |
| * Set multicast filter |
| */ |
| void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| /* Set the multicat filter */ |
| ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0); |
| ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1); |
| } |
| |
| /* |
| * Set multicast filter by index |
| */ |
| int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index) |
| { |
| |
| ATH5K_TRACE(ah->ah_sc); |
| if (index >= 64) |
| return -EINVAL; |
| else if (index >= 32) |
| AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1, |
| (1 << (index - 32))); |
| else |
| AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); |
| |
| return 0; |
| } |
| |
| /* |
| * Clear Multicast filter by index |
| */ |
| int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index) |
| { |
| |
| ATH5K_TRACE(ah->ah_sc); |
| if (index >= 64) |
| return -EINVAL; |
| else if (index >= 32) |
| AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1, |
| (1 << (index - 32))); |
| else |
| AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); |
| |
| return 0; |
| } |
| |
| /* |
| * Get current rx filter |
| */ |
| u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) |
| { |
| u32 data, filter = 0; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER); |
| |
| /*Radar detection for 5212*/ |
| if (ah->ah_version == AR5K_AR5212) { |
| data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL); |
| |
| if (data & AR5K_PHY_ERR_FIL_RADAR) |
| filter |= AR5K_RX_FILTER_RADARERR; |
| if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK)) |
| filter |= AR5K_RX_FILTER_PHYERR; |
| } |
| |
| return filter; |
| } |
| |
| /* |
| * Set rx filter |
| */ |
| void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) |
| { |
| u32 data = 0; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| |
| /* Set PHY error filter register on 5212*/ |
| if (ah->ah_version == AR5K_AR5212) { |
| if (filter & AR5K_RX_FILTER_RADARERR) |
| data |= AR5K_PHY_ERR_FIL_RADAR; |
| if (filter & AR5K_RX_FILTER_PHYERR) |
| data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK; |
| } |
| |
| /* |
| * The AR5210 uses promiscous mode to detect radar activity |
| */ |
| if (ah->ah_version == AR5K_AR5210 && |
| (filter & AR5K_RX_FILTER_RADARERR)) { |
| filter &= ~AR5K_RX_FILTER_RADARERR; |
| filter |= AR5K_RX_FILTER_PROM; |
| } |
| |
| /*Zero length DMA*/ |
| if (data) |
| AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); |
| else |
| AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); |
| |
| /*Write RX Filter register*/ |
| ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER); |
| |
| /*Write PHY error filter register on 5212*/ |
| if (ah->ah_version == AR5K_AR5212) |
| ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL); |
| |
| } |
| |
| /* |
| * Beacon related functions |
| */ |
| |
| /* |
| * Get a 32bit TSF |
| */ |
| u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| return ath5k_hw_reg_read(ah, AR5K_TSF_L32); |
| } |
| |
| /* |
| * Get the full 64bit TSF |
| */ |
| u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) |
| { |
| u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32); |
| ATH5K_TRACE(ah->ah_sc); |
| |
| return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32); |
| } |
| |
| /* |
| * Force a TSF reset |
| */ |
| void ath5k_hw_reset_tsf(struct ath5k_hw *ah) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_RESET_TSF); |
| } |
| |
| /* |
| * Initialize beacon timers |
| */ |
| void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) |
| { |
| u32 timer1, timer2, timer3; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| /* |
| * Set the additional timers by mode |
| */ |
| switch (ah->ah_op_mode) { |
| case IEEE80211_IF_TYPE_STA: |
| if (ah->ah_version == AR5K_AR5210) { |
| timer1 = 0xffffffff; |
| timer2 = 0xffffffff; |
| } else { |
| timer1 = 0x0000ffff; |
| timer2 = 0x0007ffff; |
| } |
| break; |
| |
| default: |
| timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3; |
| timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3; |
| } |
| |
| timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1); |
| |
| /* |
| * Set the beacon register and enable all timers. |
| * (next beacon, DMA beacon, software beacon, ATIM window time) |
| */ |
| ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); |
| ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1); |
| ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2); |
| ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3); |
| |
| ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD | |
| AR5K_BEACON_RESET_TSF | AR5K_BEACON_ENABLE), |
| AR5K_BEACON); |
| } |
| |
| #if 0 |
| /* |
| * Set beacon timers |
| */ |
| int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, |
| const struct ath5k_beacon_state *state) |
| { |
| u32 cfp_period, next_cfp, dtim, interval, next_beacon; |
| |
| /* |
| * TODO: should be changed through *state |
| * review struct ath5k_beacon_state struct |
| * |
| * XXX: These are used for cfp period bellow, are they |
| * ok ? Is it O.K. for tsf here to be 0 or should we use |
| * get_tsf ? |
| */ |
| u32 dtim_count = 0; /* XXX */ |
| u32 cfp_count = 0; /* XXX */ |
| u32 tsf = 0; /* XXX */ |
| |
| ATH5K_TRACE(ah->ah_sc); |
| /* Return on an invalid beacon state */ |
| if (state->bs_interval < 1) |
| return -EINVAL; |
| |
| interval = state->bs_interval; |
| dtim = state->bs_dtim_period; |
| |
| /* |
| * PCF support? |
| */ |
| if (state->bs_cfp_period > 0) { |
| /* |
| * Enable PCF mode and set the CFP |
| * (Contention Free Period) and timer registers |
| */ |
| cfp_period = state->bs_cfp_period * state->bs_dtim_period * |
| state->bs_interval; |
| next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) * |
| state->bs_interval; |
| |
| AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, |
| AR5K_STA_ID1_DEFAULT_ANTENNA | |
| AR5K_STA_ID1_PCF); |
| ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD); |
| ath5k_hw_reg_write(ah, state->bs_cfp_max_duration, |
| AR5K_CFP_DUR); |
| ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period : |
| next_cfp)) << 3, AR5K_TIMER2); |
| } else { |
| /* Disable PCF mode */ |
| AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, |
| AR5K_STA_ID1_DEFAULT_ANTENNA | |
| AR5K_STA_ID1_PCF); |
| } |
| |
| /* |
| * Enable the beacon timer register |
| */ |
| ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0); |
| |
| /* |
| * Start the beacon timers |
| */ |
| ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) &~ |
| (AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) | |
| AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0, |
| AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval, |
| AR5K_BEACON_PERIOD), AR5K_BEACON); |
| |
| /* |
| * Write new beacon miss threshold, if it appears to be valid |
| * XXX: Figure out right values for min <= bs_bmiss_threshold <= max |
| * and return if its not in range. We can test this by reading value and |
| * setting value to a largest value and seeing which values register. |
| */ |
| |
| AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS, |
| state->bs_bmiss_threshold); |
| |
| /* |
| * Set sleep control register |
| * XXX: Didn't find this in 5210 code but since this register |
| * exists also in ar5k's 5210 headers i leave it as common code. |
| */ |
| AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR, |
| (state->bs_sleep_duration - 3) << 3); |
| |
| /* |
| * Set enhanced sleep registers on 5212 |
| */ |
| if (ah->ah_version == AR5K_AR5212) { |
| if (state->bs_sleep_duration > state->bs_interval && |
| roundup(state->bs_sleep_duration, interval) == |
| state->bs_sleep_duration) |
| interval = state->bs_sleep_duration; |
| |
| if (state->bs_sleep_duration > dtim && (dtim == 0 || |
| roundup(state->bs_sleep_duration, dtim) == |
| state->bs_sleep_duration)) |
| dtim = state->bs_sleep_duration; |
| |
| if (interval > dtim) |
| return -EINVAL; |
| |
| next_beacon = interval == dtim ? state->bs_next_dtim : |
| state->bs_next_beacon; |
| |
| ath5k_hw_reg_write(ah, |
| AR5K_REG_SM((state->bs_next_dtim - 3) << 3, |
| AR5K_SLEEP0_NEXT_DTIM) | |
| AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) | |
| AR5K_SLEEP0_ENH_SLEEP_EN | |
| AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0); |
| |
| ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3, |
| AR5K_SLEEP1_NEXT_TIM) | |
| AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1); |
| |
| ath5k_hw_reg_write(ah, |
| AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) | |
| AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Reset beacon timers |
| */ |
| void ath5k_hw_reset_beacon(struct ath5k_hw *ah) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| /* |
| * Disable beacon timer |
| */ |
| ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); |
| |
| /* |
| * Disable some beacon register values |
| */ |
| AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, |
| AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF); |
| ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON); |
| } |
| |
| /* |
| * Wait for beacon queue to finish |
| */ |
| int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr) |
| { |
| unsigned int i; |
| int ret; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| |
| /* 5210 doesn't have QCU*/ |
| if (ah->ah_version == AR5K_AR5210) { |
| /* |
| * Wait for beaconn queue to finish by checking |
| * Control Register and Beacon Status Register. |
| */ |
| for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) { |
| if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F) |
| || |
| !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F)) |
| break; |
| udelay(10); |
| } |
| |
| /* Timeout... */ |
| if (i <= 0) { |
| /* |
| * Re-schedule the beacon queue |
| */ |
| ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1); |
| ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, |
| AR5K_BCR); |
| |
| return -EIO; |
| } |
| ret = 0; |
| } else { |
| /*5211/5212*/ |
| ret = ath5k_hw_register_timeout(ah, |
| AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON), |
| AR5K_QCU_STS_FRMPENDCNT, 0, false); |
| |
| if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON)) |
| return -EIO; |
| } |
| |
| return ret; |
| } |
| #endif |
| |
| /* |
| * Update mib counters (statistics) |
| */ |
| void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, |
| struct ieee80211_low_level_stats *stats) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| |
| /* Read-And-Clear */ |
| stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL); |
| stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL); |
| stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK); |
| stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL); |
| |
| /* XXX: Should we use this to track beacon count ? |
| * -we read it anyway to clear the register */ |
| ath5k_hw_reg_read(ah, AR5K_BEACON_CNT); |
| |
| /* Reset profile count registers on 5212*/ |
| if (ah->ah_version == AR5K_AR5212) { |
| ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX); |
| ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX); |
| ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR); |
| ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE); |
| } |
| } |
| |
| /** ath5k_hw_set_ack_bitrate - set bitrate for ACKs |
| * |
| * @ah: the &struct ath5k_hw |
| * @high: determines if to use low bit rate or now |
| */ |
| void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high) |
| { |
| if (ah->ah_version != AR5K_AR5212) |
| return; |
| else { |
| u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB; |
| if (high) |
| AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); |
| else |
| AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val); |
| } |
| } |
| |
| |
| /* |
| * ACK/CTS Timeouts |
| */ |
| |
| /* |
| * Set ACK timeout on PCU |
| */ |
| int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK), |
| ah->ah_turbo) <= timeout) |
| return -EINVAL; |
| |
| AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK, |
| ath5k_hw_htoclock(timeout, ah->ah_turbo)); |
| |
| return 0; |
| } |
| |
| /* |
| * Read the ACK timeout from PCU |
| */ |
| unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| |
| return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, |
| AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo); |
| } |
| |
| /* |
| * Set CTS timeout on PCU |
| */ |
| int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS), |
| ah->ah_turbo) <= timeout) |
| return -EINVAL; |
| |
| AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS, |
| ath5k_hw_htoclock(timeout, ah->ah_turbo)); |
| |
| return 0; |
| } |
| |
| /* |
| * Read CTS timeout from PCU |
| */ |
| unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, |
| AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo); |
| } |
| |
| /* |
| * Key table (WEP) functions |
| */ |
| |
| int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry) |
| { |
| unsigned int i; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); |
| |
| for (i = 0; i < AR5K_KEYCACHE_SIZE; i++) |
| ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i)); |
| |
| /* |
| * Set NULL encryption on AR5212+ |
| * |
| * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5) |
| * AR5K_KEYTABLE_TYPE_NULL -> 0x00000007 |
| * |
| * Note2: Windows driver (ndiswrapper) sets this to |
| * 0x00000714 instead of 0x00000007 |
| */ |
| if (ah->ah_version > AR5K_AR5211) |
| ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, |
| AR5K_KEYTABLE_TYPE(entry)); |
| |
| return 0; |
| } |
| |
| int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); |
| |
| /* Check the validation flag at the end of the entry */ |
| return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) & |
| AR5K_KEYTABLE_VALID; |
| } |
| |
| int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, |
| const struct ieee80211_key_conf *key, const u8 *mac) |
| { |
| unsigned int i; |
| __le32 key_v[5] = {}; |
| u32 keytype; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| |
| /* key->keylen comes in from mac80211 in bytes */ |
| |
| if (key->keylen > AR5K_KEYTABLE_SIZE / 8) |
| return -EOPNOTSUPP; |
| |
| switch (key->keylen) { |
| /* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit */ |
| case 40 / 8: |
| memcpy(&key_v[0], key->key, 5); |
| keytype = AR5K_KEYTABLE_TYPE_40; |
| break; |
| |
| /* WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit */ |
| case 104 / 8: |
| memcpy(&key_v[0], &key->key[0], 6); |
| memcpy(&key_v[2], &key->key[6], 6); |
| memcpy(&key_v[4], &key->key[12], 1); |
| keytype = AR5K_KEYTABLE_TYPE_104; |
| break; |
| /* WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit */ |
| case 128 / 8: |
| memcpy(&key_v[0], &key->key[0], 6); |
| memcpy(&key_v[2], &key->key[6], 6); |
| memcpy(&key_v[4], &key->key[12], 4); |
| keytype = AR5K_KEYTABLE_TYPE_128; |
| break; |
| |
| default: |
| return -EINVAL; /* shouldn't happen */ |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(key_v); i++) |
| ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]), |
| AR5K_KEYTABLE_OFF(entry, i)); |
| |
| ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry)); |
| |
| return ath5k_hw_set_key_lladdr(ah, entry, mac); |
| } |
| |
| int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac) |
| { |
| u32 low_id, high_id; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| /* Invalid entry (key table overflow) */ |
| AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); |
| |
| /* MAC may be NULL if it's a broadcast key. In this case no need to |
| * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */ |
| if (unlikely(mac == NULL)) { |
| low_id = 0xffffffff; |
| high_id = 0xffff | AR5K_KEYTABLE_VALID; |
| } else { |
| low_id = AR5K_LOW_ID(mac); |
| high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID; |
| } |
| |
| ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry)); |
| ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry)); |
| |
| return 0; |
| } |
| |
| |
| /********************************************\ |
| Queue Control Unit, DFS Control Unit Functions |
| \********************************************/ |
| |
| /* |
| * Initialize a transmit queue |
| */ |
| int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, |
| struct ath5k_txq_info *queue_info) |
| { |
| unsigned int queue; |
| int ret; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| |
| /* |
| * Get queue by type |
| */ |
| /*5210 only has 2 queues*/ |
| if (ah->ah_version == AR5K_AR5210) { |
| switch (queue_type) { |
| case AR5K_TX_QUEUE_DATA: |
| queue = AR5K_TX_QUEUE_ID_NOQCU_DATA; |
| break; |
| case AR5K_TX_QUEUE_BEACON: |
| case AR5K_TX_QUEUE_CAB: |
| queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON; |
| break; |
| default: |
| return -EINVAL; |
| } |
| } else { |
| switch (queue_type) { |
| case AR5K_TX_QUEUE_DATA: |
| for (queue = AR5K_TX_QUEUE_ID_DATA_MIN; |
| ah->ah_txq[queue].tqi_type != |
| AR5K_TX_QUEUE_INACTIVE; queue++) { |
| |
| if (queue > AR5K_TX_QUEUE_ID_DATA_MAX) |
| return -EINVAL; |
| } |
| break; |
| case AR5K_TX_QUEUE_UAPSD: |
| queue = AR5K_TX_QUEUE_ID_UAPSD; |
| break; |
| case AR5K_TX_QUEUE_BEACON: |
| queue = AR5K_TX_QUEUE_ID_BEACON; |
| break; |
| case AR5K_TX_QUEUE_CAB: |
| queue = AR5K_TX_QUEUE_ID_CAB; |
| break; |
| case AR5K_TX_QUEUE_XR_DATA: |
| if (ah->ah_version != AR5K_AR5212) |
| ATH5K_ERR(ah->ah_sc, |
| "XR data queues only supported in" |
| " 5212!\n"); |
| queue = AR5K_TX_QUEUE_ID_XR_DATA; |
| break; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| /* |
| * Setup internal queue structure |
| */ |
| memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info)); |
| ah->ah_txq[queue].tqi_type = queue_type; |
| |
| if (queue_info != NULL) { |
| queue_info->tqi_type = queue_type; |
| ret = ath5k_hw_setup_tx_queueprops(ah, queue, queue_info); |
| if (ret) |
| return ret; |
| } |
| /* |
| * We use ah_txq_status to hold a temp value for |
| * the Secondary interrupt mask registers on 5211+ |
| * check out ath5k_hw_reset_tx_queue |
| */ |
| AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue); |
| |
| return queue; |
| } |
| |
| /* |
| * Setup a transmit queue |
| */ |
| int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, |
| const struct ath5k_txq_info *queue_info) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); |
| |
| if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) |
| return -EIO; |
| |
| memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info)); |
| |
| /*XXX: Is this supported on 5210 ?*/ |
| if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA && |
| ((queue_info->tqi_subtype == AR5K_WME_AC_VI) || |
| (queue_info->tqi_subtype == AR5K_WME_AC_VO))) || |
| queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD) |
| ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS; |
| |
| return 0; |
| } |
| |
| /* |
| * Get properties for a specific transmit queue |
| */ |
| int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, |
| struct ath5k_txq_info *queue_info) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info)); |
| return 0; |
| } |
| |
| /* |
| * Set a transmit queue inactive |
| */ |
| void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num)) |
| return; |
| |
| /* This queue will be skipped in further operations */ |
| ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE; |
| /*For SIMR setup*/ |
| AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue); |
| } |
| |
| /* |
| * Set DFS params for a transmit queue |
| */ |
| int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) |
| { |
| u32 cw_min, cw_max, retry_lg, retry_sh; |
| struct ath5k_txq_info *tq = &ah->ah_txq[queue]; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); |
| |
| tq = &ah->ah_txq[queue]; |
| |
| if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE) |
| return 0; |
| |
| if (ah->ah_version == AR5K_AR5210) { |
| /* Only handle data queues, others will be ignored */ |
| if (tq->tqi_type != AR5K_TX_QUEUE_DATA) |
| return 0; |
| |
| /* Set Slot time */ |
| ath5k_hw_reg_write(ah, ah->ah_turbo ? |
| AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME, |
| AR5K_SLOT_TIME); |
| /* Set ACK_CTS timeout */ |
| ath5k_hw_reg_write(ah, ah->ah_turbo ? |
| AR5K_INIT_ACK_CTS_TIMEOUT_TURBO : |
| AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME); |
| /* Set Transmit Latency */ |
| ath5k_hw_reg_write(ah, ah->ah_turbo ? |
| AR5K_INIT_TRANSMIT_LATENCY_TURBO : |
| AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210); |
| /* Set IFS0 */ |
| if (ah->ah_turbo) |
| ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO + |
| (ah->ah_aifs + tq->tqi_aifs) * |
| AR5K_INIT_SLOT_TIME_TURBO) << |
| AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO, |
| AR5K_IFS0); |
| else |
| ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS + |
| (ah->ah_aifs + tq->tqi_aifs) * |
| AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) | |
| AR5K_INIT_SIFS, AR5K_IFS0); |
| |
| /* Set IFS1 */ |
| ath5k_hw_reg_write(ah, ah->ah_turbo ? |
| AR5K_INIT_PROTO_TIME_CNTRL_TURBO : |
| AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1); |
| /* Set PHY register 0x9844 (??) */ |
| ath5k_hw_reg_write(ah, ah->ah_turbo ? |
| (ath5k_hw_reg_read(ah, AR5K_PHY(17)) & ~0x7F) | 0x38 : |
| (ath5k_hw_reg_read(ah, AR5K_PHY(17)) & ~0x7F) | 0x1C, |
| AR5K_PHY(17)); |
| /* Set Frame Control Register */ |
| ath5k_hw_reg_write(ah, ah->ah_turbo ? |
| (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE | |
| AR5K_PHY_TURBO_SHORT | 0x2020) : |
| (AR5K_PHY_FRAME_CTL_INI | 0x1020), |
| AR5K_PHY_FRAME_CTL_5210); |
| } |
| |
| /* |
| * Calculate cwmin/max by channel mode |
| */ |
| cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN; |
| cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX; |
| ah->ah_aifs = AR5K_TUNE_AIFS; |
| /*XR is only supported on 5212*/ |
| if (IS_CHAN_XR(ah->ah_current_channel) && |
| ah->ah_version == AR5K_AR5212) { |
| cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR; |
| cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR; |
| ah->ah_aifs = AR5K_TUNE_AIFS_XR; |
| /*B mode is not supported on 5210*/ |
| } else if (IS_CHAN_B(ah->ah_current_channel) && |
| ah->ah_version != AR5K_AR5210) { |
| cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B; |
| cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B; |
| ah->ah_aifs = AR5K_TUNE_AIFS_11B; |
| } |
| |
| cw_min = 1; |
| while (cw_min < ah->ah_cw_min) |
| cw_min = (cw_min << 1) | 1; |
| |
| cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) : |
| ((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1); |
| cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) : |
| ((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1); |
| |
| /* |
| * Calculate and set retry limits |
| */ |
| if (ah->ah_software_retry) { |
| /* XXX Need to test this */ |
| retry_lg = ah->ah_limit_tx_retries; |
| retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ? |
| AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg; |
| } else { |
| retry_lg = AR5K_INIT_LG_RETRY; |
| retry_sh = AR5K_INIT_SH_RETRY; |
| } |
| |
| /*No QCU/DCU [5210]*/ |
| if (ah->ah_version == AR5K_AR5210) { |
| ath5k_hw_reg_write(ah, |
| (cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S) |
| | AR5K_REG_SM(AR5K_INIT_SLG_RETRY, |
| AR5K_NODCU_RETRY_LMT_SLG_RETRY) |
| | AR5K_REG_SM(AR5K_INIT_SSH_RETRY, |
| AR5K_NODCU_RETRY_LMT_SSH_RETRY) |
| | AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY) |
| | AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY), |
| AR5K_NODCU_RETRY_LMT); |
| } else { |
| /*QCU/DCU [5211+]*/ |
| ath5k_hw_reg_write(ah, |
| AR5K_REG_SM(AR5K_INIT_SLG_RETRY, |
| AR5K_DCU_RETRY_LMT_SLG_RETRY) | |
| AR5K_REG_SM(AR5K_INIT_SSH_RETRY, |
| AR5K_DCU_RETRY_LMT_SSH_RETRY) | |
| AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) | |
| AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY), |
| AR5K_QUEUE_DFS_RETRY_LIMIT(queue)); |
| |
| /*===Rest is also for QCU/DCU only [5211+]===*/ |
| |
| /* |
| * Set initial content window (cw_min/cw_max) |
| * and arbitrated interframe space (aifs)... |
| */ |
| ath5k_hw_reg_write(ah, |
| AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) | |
| AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) | |
| AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs, |
| AR5K_DCU_LCL_IFS_AIFS), |
| AR5K_QUEUE_DFS_LOCAL_IFS(queue)); |
| |
| /* |
| * Set misc registers |
| */ |
| ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY, |
| AR5K_QUEUE_MISC(queue)); |
| |
| if (tq->tqi_cbr_period) { |
| ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period, |
| AR5K_QCU_CBRCFG_INTVAL) | |
| AR5K_REG_SM(tq->tqi_cbr_overflow_limit, |
| AR5K_QCU_CBRCFG_ORN_THRES), |
| AR5K_QUEUE_CBRCFG(queue)); |
| AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), |
| AR5K_QCU_MISC_FRSHED_CBR); |
| if (tq->tqi_cbr_overflow_limit) |
| AR5K_REG_ENABLE_BITS(ah, |
| AR5K_QUEUE_MISC(queue), |
| AR5K_QCU_MISC_CBR_THRES_ENABLE); |
| } |
| |
| if (tq->tqi_ready_time) |
| ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time, |
| AR5K_QCU_RDYTIMECFG_INTVAL) | |
| AR5K_QCU_RDYTIMECFG_ENABLE, |
| AR5K_QUEUE_RDYTIMECFG(queue)); |
| |
| if (tq->tqi_burst_time) { |
| ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time, |
| AR5K_DCU_CHAN_TIME_DUR) | |
| AR5K_DCU_CHAN_TIME_ENABLE, |
| AR5K_QUEUE_DFS_CHANNEL_TIME(queue)); |
| |
| if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE) |
| AR5K_REG_ENABLE_BITS(ah, |
| AR5K_QUEUE_MISC(queue), |
| AR5K_QCU_MISC_TXE); |
| } |
| |
| if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE) |
| ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS, |
| AR5K_QUEUE_DFS_MISC(queue)); |
| |
| if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE) |
| ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG, |
| AR5K_QUEUE_DFS_MISC(queue)); |
| |
| /* |
| * Set registers by queue type |
| */ |
| switch (tq->tqi_type) { |
| case AR5K_TX_QUEUE_BEACON: |
| AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), |
| AR5K_QCU_MISC_FRSHED_DBA_GT | |
| AR5K_QCU_MISC_CBREXP_BCN | |
| AR5K_QCU_MISC_BCN_ENABLE); |
| |
| AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), |
| (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << |
| AR5K_DCU_MISC_ARBLOCK_CTL_S) | |
| AR5K_DCU_MISC_POST_FR_BKOFF_DIS | |
| AR5K_DCU_MISC_BCN_ENABLE); |
| |
| ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL - |
| (AR5K_TUNE_SW_BEACON_RESP - |
| AR5K_TUNE_DMA_BEACON_RESP) - |
| AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) | |
| AR5K_QCU_RDYTIMECFG_ENABLE, |
| AR5K_QUEUE_RDYTIMECFG(queue)); |
| break; |
| |
| case AR5K_TX_QUEUE_CAB: |
| AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), |
| AR5K_QCU_MISC_FRSHED_DBA_GT | |
| AR5K_QCU_MISC_CBREXP | |
| AR5K_QCU_MISC_CBREXP_BCN); |
| |
| AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), |
| (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << |
| AR5K_DCU_MISC_ARBLOCK_CTL_S)); |
| break; |
| |
| case AR5K_TX_QUEUE_UAPSD: |
| AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), |
| AR5K_QCU_MISC_CBREXP); |
| break; |
| |
| case AR5K_TX_QUEUE_DATA: |
| default: |
| break; |
| } |
| |
| /* |
| * Enable interrupts for this tx queue |
| * in the secondary interrupt mask registers |
| */ |
| if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE) |
| AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue); |
| |
| if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE) |
| AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue); |
| |
| if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE) |
| AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue); |
| |
| if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE) |
| AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue); |
| |
| if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE) |
| AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue); |
| |
| |
| /* Update secondary interrupt mask registers */ |
| ah->ah_txq_imr_txok &= ah->ah_txq_status; |
| ah->ah_txq_imr_txerr &= ah->ah_txq_status; |
| ah->ah_txq_imr_txurn &= ah->ah_txq_status; |
| ah->ah_txq_imr_txdesc &= ah->ah_txq_status; |
| ah->ah_txq_imr_txeol &= ah->ah_txq_status; |
| |
| ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok, |
| AR5K_SIMR0_QCU_TXOK) | |
| AR5K_REG_SM(ah->ah_txq_imr_txdesc, |
| AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0); |
| ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr, |
| AR5K_SIMR1_QCU_TXERR) | |
| AR5K_REG_SM(ah->ah_txq_imr_txeol, |
| AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1); |
| ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txurn, |
| AR5K_SIMR2_QCU_TXURN), AR5K_SIMR2); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Get number of pending frames |
| * for a specific queue [5211+] |
| */ |
| u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) { |
| ATH5K_TRACE(ah->ah_sc); |
| AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); |
| |
| /* Return if queue is declared inactive */ |
| if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) |
| return false; |
| |
| /* XXX: How about AR5K_CFG_TXCNT ? */ |
| if (ah->ah_version == AR5K_AR5210) |
| return false; |
| |
| return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT; |
| } |
| |
| /* |
| * Set slot time |
| */ |
| int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX) |
| return -EINVAL; |
| |
| if (ah->ah_version == AR5K_AR5210) |
| ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time, |
| ah->ah_turbo), AR5K_SLOT_TIME); |
| else |
| ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT); |
| |
| return 0; |
| } |
| |
| /* |
| * Get slot time |
| */ |
| unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| if (ah->ah_version == AR5K_AR5210) |
| return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah, |
| AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo); |
| else |
| return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff; |
| } |
| |
| |
| /******************************\ |
| Hardware Descriptor Functions |
| \******************************/ |
| |
| /* |
| * TX Descriptor |
| */ |
| |
| /* |
| * Initialize the 2-word tx descriptor on 5210/5211 |
| */ |
| static int |
| ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, |
| unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type, |
| unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0, |
| unsigned int key_index, unsigned int antenna_mode, unsigned int flags, |
| unsigned int rtscts_rate, unsigned int rtscts_duration) |
| { |
| u32 frame_type; |
| struct ath5k_hw_2w_tx_ctl *tx_ctl; |
| unsigned int frame_len; |
| |
| tx_ctl = &desc->ud.ds_tx5210.tx_ctl; |
| |
| /* |
| * Validate input |
| * - Zero retries don't make sense. |
| * - A zero rate will put the HW into a mode where it continously sends |
| * noise on the channel, so it is important to avoid this. |
| */ |
| if (unlikely(tx_tries0 == 0)) { |
| ATH5K_ERR(ah->ah_sc, "zero retries\n"); |
| WARN_ON(1); |
| return -EINVAL; |
| } |
| if (unlikely(tx_rate0 == 0)) { |
| ATH5K_ERR(ah->ah_sc, "zero rate\n"); |
| WARN_ON(1); |
| return -EINVAL; |
| } |
| |
| /* Clear descriptor */ |
| memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc)); |
| |
| /* Setup control descriptor */ |
| |
| /* Verify and set frame length */ |
| |
| /* remove padding we might have added before */ |
| frame_len = pkt_len - (hdr_len & 3) + FCS_LEN; |
| |
| if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN) |
| return -EINVAL; |
| |
| tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN; |
| |
| /* Verify and set buffer length */ |
| |
| /* NB: beacon's BufLen must be a multiple of 4 bytes */ |
| if(type == AR5K_PKT_TYPE_BEACON) |
| pkt_len = roundup(pkt_len, 4); |
| |
| if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN) |
| return -EINVAL; |
| |
| tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN; |
| |
| /* |
| * Verify and set header length |
| * XXX: I only found that on 5210 code, does it work on 5211 ? |
| */ |
| if (ah->ah_version == AR5K_AR5210) { |
| if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN) |
| return -EINVAL; |
| tx_ctl->tx_control_0 |= |
| AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN); |
| } |
| |
| /*Diferences between 5210-5211*/ |
| if (ah->ah_version == AR5K_AR5210) { |
| switch (type) { |
| case AR5K_PKT_TYPE_BEACON: |
| case AR5K_PKT_TYPE_PROBE_RESP: |
| frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY; |
| case AR5K_PKT_TYPE_PIFS: |
| frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS; |
| default: |
| frame_type = type /*<< 2 ?*/; |
| } |
| |
| tx_ctl->tx_control_0 |= |
| AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) | |
| AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE); |
| } else { |
| tx_ctl->tx_control_0 |= |
| AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) | |
| AR5K_REG_SM(antenna_mode, AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT); |
| tx_ctl->tx_control_1 |= |
| AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE); |
| } |
| #define _TX_FLAGS(_c, _flag) \ |
| if (flags & AR5K_TXDESC_##_flag) \ |
| tx_ctl->tx_control_##_c |= \ |
| AR5K_2W_TX_DESC_CTL##_c##_##_flag |
| |
| _TX_FLAGS(0, CLRDMASK); |
| _TX_FLAGS(0, VEOL); |
| _TX_FLAGS(0, INTREQ); |
| _TX_FLAGS(0, RTSENA); |
| _TX_FLAGS(1, NOACK); |
| |
| #undef _TX_FLAGS |
| |
| /* |
| * WEP crap |
| */ |
| if (key_index != AR5K_TXKEYIX_INVALID) { |
| tx_ctl->tx_control_0 |= |
| AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; |
| tx_ctl->tx_control_1 |= |
| AR5K_REG_SM(key_index, |
| AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); |
| } |
| |
| /* |
| * RTS/CTS Duration [5210 ?] |
| */ |
| if ((ah->ah_version == AR5K_AR5210) && |
| (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA))) |
| tx_ctl->tx_control_1 |= rtscts_duration & |
| AR5K_2W_TX_DESC_CTL1_RTS_DURATION; |
| |
| return 0; |
| } |
| |
| /* |
| * Initialize the 4-word tx descriptor on 5212 |
| */ |
| static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, |
| struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len, |
| enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0, |
| unsigned int tx_tries0, unsigned int key_index, |
| unsigned int antenna_mode, unsigned int flags, unsigned int rtscts_rate, |
| unsigned int rtscts_duration) |
| { |
| struct ath5k_hw_4w_tx_ctl *tx_ctl; |
| unsigned int frame_len; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| tx_ctl = &desc->ud.ds_tx5212.tx_ctl; |
| |
| /* |
| * Validate input |
| * - Zero retries don't make sense. |
| * - A zero rate will put the HW into a mode where it continously sends |
| * noise on the channel, so it is important to avoid this. |
| */ |
| if (unlikely(tx_tries0 == 0)) { |
| ATH5K_ERR(ah->ah_sc, "zero retries\n"); |
| WARN_ON(1); |
| return -EINVAL; |
| } |
| if (unlikely(tx_rate0 == 0)) { |
| ATH5K_ERR(ah->ah_sc, "zero rate\n"); |
| WARN_ON(1); |
| return -EINVAL; |
| } |
| |
| /* Clear descriptor */ |
| memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc)); |
| |
| /* Setup control descriptor */ |
| |
| /* Verify and set frame length */ |
| |
| /* remove padding we might have added before */ |
| frame_len = pkt_len - (hdr_len & 3) + FCS_LEN; |
| |
| if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN) |
| return -EINVAL; |
| |
| tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN; |
| |
| /* Verify and set buffer length */ |
| |
| /* NB: beacon's BufLen must be a multiple of 4 bytes */ |
| if(type == AR5K_PKT_TYPE_BEACON) |
| pkt_len = roundup(pkt_len, 4); |
| |
| if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN) |
| return -EINVAL; |
| |
| tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN; |
| |
| tx_ctl->tx_control_0 |= |
| AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) | |
| AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT); |
| tx_ctl->tx_control_1 |= AR5K_REG_SM(type, |
| AR5K_4W_TX_DESC_CTL1_FRAME_TYPE); |
| tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES, |
| AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0); |
| tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; |
| |
| #define _TX_FLAGS(_c, _flag) \ |
| if (flags & AR5K_TXDESC_##_flag) \ |
| tx_ctl->tx_control_##_c |= \ |
| AR5K_4W_TX_DESC_CTL##_c##_##_flag |
| |
| _TX_FLAGS(0, CLRDMASK); |
| _TX_FLAGS(0, VEOL); |
| _TX_FLAGS(0, INTREQ); |
| _TX_FLAGS(0, RTSENA); |
| _TX_FLAGS(0, CTSENA); |
| _TX_FLAGS(1, NOACK); |
| |
| #undef _TX_FLAGS |
| |
| /* |
| * WEP crap |
| */ |
| if (key_index != AR5K_TXKEYIX_INVALID) { |
| tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; |
| tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index, |
| AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); |
| } |
| |
| /* |
| * RTS/CTS |
| */ |
| if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) { |
| if ((flags & AR5K_TXDESC_RTSENA) && |
| (flags & AR5K_TXDESC_CTSENA)) |
| return -EINVAL; |
| tx_ctl->tx_control_2 |= rtscts_duration & |
| AR5K_4W_TX_DESC_CTL2_RTS_DURATION; |
| tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate, |
| AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Initialize a 4-word multirate tx descriptor on 5212 |
| */ |
| static int |
| ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, |
| unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, u_int tx_tries2, |
| unsigned int tx_rate3, u_int tx_tries3) |
| { |
| struct ath5k_hw_4w_tx_ctl *tx_ctl; |
| |
| /* |
| * Rates can be 0 as long as the retry count is 0 too. |
| * A zero rate and nonzero retry count will put the HW into a mode where |
| * it continously sends noise on the channel, so it is important to |
| * avoid this. |
| */ |
| if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) || |
| (tx_rate2 == 0 && tx_tries2 != 0) || |
| (tx_rate3 == 0 && tx_tries3 != 0))) { |
| ATH5K_ERR(ah->ah_sc, "zero rate\n"); |
| WARN_ON(1); |
| return -EINVAL; |
| } |
| |
| if (ah->ah_version == AR5K_AR5212) { |
| tx_ctl = &desc->ud.ds_tx5212.tx_ctl; |
| |
| #define _XTX_TRIES(_n) \ |
| if (tx_tries##_n) { \ |
| tx_ctl->tx_control_2 |= \ |
| AR5K_REG_SM(tx_tries##_n, \ |
| AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n); \ |
| tx_ctl->tx_control_3 |= \ |
| AR5K_REG_SM(tx_rate##_n, \ |
| AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n); \ |
| } |
| |
| _XTX_TRIES(1); |
| _XTX_TRIES(2); |
| _XTX_TRIES(3); |
| |
| #undef _XTX_TRIES |
| |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Proccess the tx status descriptor on 5210/5211 |
| */ |
| static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, |
| struct ath5k_desc *desc, struct ath5k_tx_status *ts) |
| { |
| struct ath5k_hw_2w_tx_ctl *tx_ctl; |
| struct ath5k_hw_tx_status *tx_status; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| |
| tx_ctl = &desc->ud.ds_tx5210.tx_ctl; |
| tx_status = &desc->ud.ds_tx5210.tx_stat; |
| |
| /* No frame has been send or error */ |
| if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0)) |
| return -EINPROGRESS; |
| |
| /* |
| * Get descriptor status |
| */ |
| ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, |
| AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); |
| ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, |
| AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); |
| ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, |
| AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); |
| /*TODO: ts->ts_virtcol + test*/ |
| ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, |
| AR5K_DESC_TX_STATUS1_SEQ_NUM); |
| ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, |
| AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); |
| ts->ts_antenna = 1; |
| ts->ts_status = 0; |
| ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_0, |
| AR5K_2W_TX_DESC_CTL0_XMIT_RATE); |
| |
| if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){ |
| if (tx_status->tx_status_0 & |
| AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) |
| ts->ts_status |= AR5K_TXERR_XRETRY; |
| |
| if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) |
| ts->ts_status |= AR5K_TXERR_FIFO; |
| |
| if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) |
| ts->ts_status |= AR5K_TXERR_FILT; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Proccess a tx descriptor on 5212 |
| */ |
| static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, |
| struct ath5k_desc *desc, struct ath5k_tx_status *ts) |
| { |
| struct ath5k_hw_4w_tx_ctl *tx_ctl; |
| struct ath5k_hw_tx_status *tx_status; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| |
| tx_ctl = &desc->ud.ds_tx5212.tx_ctl; |
| tx_status = &desc->ud.ds_tx5212.tx_stat; |
| |
| /* No frame has been send or error */ |
| if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0)) |
| return -EINPROGRESS; |
| |
| /* |
| * Get descriptor status |
| */ |
| ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, |
| AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); |
| ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, |
| AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); |
| ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, |
| AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); |
| ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, |
| AR5K_DESC_TX_STATUS1_SEQ_NUM); |
| ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, |
| AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); |
| ts->ts_antenna = (tx_status->tx_status_1 & |
| AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1; |
| ts->ts_status = 0; |
| |
| switch (AR5K_REG_MS(tx_status->tx_status_1, |
| AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX)) { |
| case 0: |
| ts->ts_rate = tx_ctl->tx_control_3 & |
| AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; |
| break; |
| case 1: |
| ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, |
| AR5K_4W_TX_DESC_CTL3_XMIT_RATE1); |
| ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, |
| AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1); |
| break; |
| case 2: |
| ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, |
| AR5K_4W_TX_DESC_CTL3_XMIT_RATE2); |
| ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, |
| AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2); |
| break; |
| case 3: |
| ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, |
| AR5K_4W_TX_DESC_CTL3_XMIT_RATE3); |
| ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, |
| AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3); |
| break; |
| } |
| |
| if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){ |
| if (tx_status->tx_status_0 & |
| AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) |
| ts->ts_status |= AR5K_TXERR_XRETRY; |
| |
| if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) |
| ts->ts_status |= AR5K_TXERR_FIFO; |
| |
| if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) |
| ts->ts_status |= AR5K_TXERR_FILT; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * RX Descriptor |
| */ |
| |
| /* |
| * Initialize an rx descriptor |
| */ |
| int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, |
| u32 size, unsigned int flags) |
| { |
| struct ath5k_hw_rx_ctl *rx_ctl; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| rx_ctl = &desc->ud.ds_rx.rx_ctl; |
| |
| /* |
| * Clear the descriptor |
| * If we don't clean the status descriptor, |
| * while scanning we get too many results, |
| * most of them virtual, after some secs |
| * of scanning system hangs. M.F. |
| */ |
| memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc)); |
| |
| /* Setup descriptor */ |
| rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN; |
| if (unlikely(rx_ctl->rx_control_1 != size)) |
| return -EINVAL; |
| |
| if (flags & AR5K_RXDESC_INTREQ) |
| rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ; |
| |
| return 0; |
| } |
| |
| /* |
| * Proccess the rx status descriptor on 5210/5211 |
| */ |
| static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, |
| struct ath5k_desc *desc, struct ath5k_rx_status *rs) |
| { |
| struct ath5k_hw_rx_status *rx_status; |
| |
| rx_status = &desc->ud.ds_rx.u.rx_stat; |
| |
| /* No frame received / not ready */ |
| if (unlikely((rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_DONE) |
| == 0)) |
| return -EINPROGRESS; |
| |
| /* |
| * Frame receive status |
| */ |
| rs->rs_datalen = rx_status->rx_status_0 & |
| AR5K_5210_RX_DESC_STATUS0_DATA_LEN; |
| rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, |
| AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL); |
| rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, |
| AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE); |
| rs->rs_antenna = rx_status->rx_status_0 & |
| AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA; |
| rs->rs_more = rx_status->rx_status_0 & |
| AR5K_5210_RX_DESC_STATUS0_MORE; |
| /* TODO: this timestamp is 13 bit, later on we assume 15 bit */ |
| rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, |
| AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); |
| rs->rs_status = 0; |
| |
| /* |
| * Key table status |
| */ |
| if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID) |
| rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, |
| AR5K_5210_RX_DESC_STATUS1_KEY_INDEX); |
| else |
| rs->rs_keyix = AR5K_RXKEYIX_INVALID; |
| |
| /* |
| * Receive/descriptor errors |
| */ |
| if ((rx_status->rx_status_1 & |
| AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK) == 0) { |
| if (rx_status->rx_status_1 & |
| AR5K_5210_RX_DESC_STATUS1_CRC_ERROR) |
| rs->rs_status |= AR5K_RXERR_CRC; |
| |
| if (rx_status->rx_status_1 & |
| AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN) |
| rs->rs_status |= AR5K_RXERR_FIFO; |
| |
| if (rx_status->rx_status_1 & |
| AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) { |
| rs->rs_status |= AR5K_RXERR_PHY; |
| rs->rs_phyerr = AR5K_REG_MS(rx_status->rx_status_1, |
| AR5K_5210_RX_DESC_STATUS1_PHY_ERROR); |
| } |
| |
| if (rx_status->rx_status_1 & |
| AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) |
| rs->rs_status |= AR5K_RXERR_DECRYPT; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Proccess the rx status descriptor on 5212 |
| */ |
| static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, |
| struct ath5k_desc *desc, struct ath5k_rx_status *rs) |
| { |
| struct ath5k_hw_rx_status *rx_status; |
| struct ath5k_hw_rx_error *rx_err; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| rx_status = &desc->ud.ds_rx.u.rx_stat; |
| |
| /* Overlay on error */ |
| rx_err = &desc->ud.ds_rx.u.rx_err; |
| |
| /* No frame received / not ready */ |
| if (unlikely((rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_DONE) |
| == 0)) |
| return -EINPROGRESS; |
| |
| /* |
| * Frame receive status |
| */ |
| rs->rs_datalen = rx_status->rx_status_0 & |
| AR5K_5212_RX_DESC_STATUS0_DATA_LEN; |
| rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, |
| AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL); |
| rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, |
| AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE); |
| rs->rs_antenna = rx_status->rx_status_0 & |
| AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA; |
| rs->rs_more = rx_status->rx_status_0 & |
| AR5K_5212_RX_DESC_STATUS0_MORE; |
| rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, |
| AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); |
| rs->rs_status = 0; |
| |
| /* |
| * Key table status |
| */ |
| if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID) |
| rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, |
| AR5K_5212_RX_DESC_STATUS1_KEY_INDEX); |
| else |
| rs->rs_keyix = AR5K_RXKEYIX_INVALID; |
| |
| /* |
| * Receive/descriptor errors |
| */ |
| if ((rx_status->rx_status_1 & |
| AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK) == 0) { |
| if (rx_status->rx_status_1 & |
| AR5K_5212_RX_DESC_STATUS1_CRC_ERROR) |
| rs->rs_status |= AR5K_RXERR_CRC; |
| |
| if (rx_status->rx_status_1 & |
| AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) { |
| rs->rs_status |= AR5K_RXERR_PHY; |
| rs->rs_phyerr = AR5K_REG_MS(rx_err->rx_error_1, |
| AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE); |
| } |
| |
| if (rx_status->rx_status_1 & |
| AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) |
| rs->rs_status |= AR5K_RXERR_DECRYPT; |
| |
| if (rx_status->rx_status_1 & |
| AR5K_5212_RX_DESC_STATUS1_MIC_ERROR) |
| rs->rs_status |= AR5K_RXERR_MIC; |
| } |
| |
| return 0; |
| } |
| |
| |
| /****************\ |
| GPIO Functions |
| \****************/ |
| |
| /* |
| * Set led state |
| */ |
| void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) |
| { |
| u32 led; |
| /*5210 has different led mode handling*/ |
| u32 led_5210; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| |
| /*Reset led status*/ |
| if (ah->ah_version != AR5K_AR5210) |
| AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, |
| AR5K_PCICFG_LEDMODE | AR5K_PCICFG_LED); |
| else |
| AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED); |
| |
| /* |
| * Some blinking values, define at your wish |
| */ |
| switch (state) { |
| case AR5K_LED_SCAN: |
| case AR5K_LED_AUTH: |
| led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND; |
| led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL; |
| break; |
| |
| case AR5K_LED_INIT: |
| led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE; |
| led_5210 = AR5K_PCICFG_LED_PEND; |
| break; |
| |
| case AR5K_LED_ASSOC: |
| case AR5K_LED_RUN: |
| led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC; |
| led_5210 = AR5K_PCICFG_LED_ASSOC; |
| break; |
| |
| default: |
| led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE; |
| led_5210 = AR5K_PCICFG_LED_PEND; |
| break; |
| } |
| |
| /*Write new status to the register*/ |
| if (ah->ah_version != AR5K_AR5210) |
| AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led); |
| else |
| AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210); |
| } |
| |
| /* |
| * Set GPIO outputs |
| */ |
| int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| if (gpio > AR5K_NUM_GPIO) |
| return -EINVAL; |
| |
| ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~ |
| AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR); |
| |
| return 0; |
| } |
| |
| /* |
| * Set GPIO inputs |
| */ |
| int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| if (gpio > AR5K_NUM_GPIO) |
| return -EINVAL; |
| |
| ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~ |
| AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR); |
| |
| return 0; |
| } |
| |
| /* |
| * Get GPIO state |
| */ |
| u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| if (gpio > AR5K_NUM_GPIO) |
| return 0xffffffff; |
| |
| /* GPIO input magic */ |
| return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) & |
| 0x1; |
| } |
| |
| /* |
| * Set GPIO state |
| */ |
| int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) |
| { |
| u32 data; |
| ATH5K_TRACE(ah->ah_sc); |
| |
| if (gpio > AR5K_NUM_GPIO) |
| return -EINVAL; |
| |
| /* GPIO output magic */ |
| data = ath5k_hw_reg_read(ah, AR5K_GPIODO); |
| |
| data &= ~(1 << gpio); |
| data |= (val & 1) << gpio; |
| |
| ath5k_hw_reg_write(ah, data, AR5K_GPIODO); |
| |
| return 0; |
| } |
| |
| /* |
| * Initialize the GPIO interrupt (RFKill switch) |
| */ |
| void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, |
| u32 interrupt_level) |
| { |
| u32 data; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| if (gpio > AR5K_NUM_GPIO) |
| return; |
| |
| /* |
| * Set the GPIO interrupt |
| */ |
| data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & |
| ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH | |
| AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) | |
| (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA); |
| |
| ath5k_hw_reg_write(ah, interrupt_level ? data : |
| (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR); |
| |
| ah->ah_imr |= AR5K_IMR_GPIO; |
| |
| /* Enable GPIO interrupts */ |
| AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO); |
| } |
| |
| |
| |
| |
| /****************\ |
| Misc functions |
| \****************/ |
| |
| int ath5k_hw_get_capability(struct ath5k_hw *ah, |
| enum ath5k_capability_type cap_type, |
| u32 capability, u32 *result) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| |
| switch (cap_type) { |
| case AR5K_CAP_NUM_TXQUEUES: |
| if (result) { |
| if (ah->ah_version == AR5K_AR5210) |
| *result = AR5K_NUM_TX_QUEUES_NOQCU; |
| else |
| *result = AR5K_NUM_TX_QUEUES; |
| goto yes; |
| } |
| case AR5K_CAP_VEOL: |
| goto yes; |
| case AR5K_CAP_COMPRESSION: |
| if (ah->ah_version == AR5K_AR5212) |
| goto yes; |
| else |
| goto no; |
| case AR5K_CAP_BURST: |
| goto yes; |
| case AR5K_CAP_TPC: |
| goto yes; |
| case AR5K_CAP_BSSIDMASK: |
| if (ah->ah_version == AR5K_AR5212) |
| goto yes; |
| else |
| goto no; |
| case AR5K_CAP_XR: |
| if (ah->ah_version == AR5K_AR5212) |
| goto yes; |
| else |
| goto no; |
| default: |
| goto no; |
| } |
| |
| no: |
| return -EINVAL; |
| yes: |
| return 0; |
| } |
| |
| static int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, |
| u16 assoc_id) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| |
| if (ah->ah_version == AR5K_AR5210) { |
| AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, |
| AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); |
| return 0; |
| } |
| |
| return -EIO; |
| } |
| |
| static int ath5k_hw_disable_pspoll(struct ath5k_hw *ah) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| |
| if (ah->ah_version == AR5K_AR5210) { |
| AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, |
| AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); |
| return 0; |
| } |
| |
| return -EIO; |
| } |