| /* DVB USB framework compliant Linux driver for the |
| * DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101, |
| * TeVii S600, S630, S650 Cards |
| * Copyright (C) 2008,2009 Igor M. Liplianin (liplianin@me.by) |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation, version 2. |
| * |
| * see Documentation/dvb/README.dvb-usb for more information |
| */ |
| #include "dw2102.h" |
| #include "si21xx.h" |
| #include "stv0299.h" |
| #include "z0194a.h" |
| #include "stv0288.h" |
| #include "stb6000.h" |
| #include "eds1547.h" |
| #include "cx24116.h" |
| #include "tda1002x.h" |
| #include "mt312.h" |
| #include "zl10039.h" |
| |
| #ifndef USB_PID_DW2102 |
| #define USB_PID_DW2102 0x2102 |
| #endif |
| |
| #ifndef USB_PID_DW2104 |
| #define USB_PID_DW2104 0x2104 |
| #endif |
| |
| #ifndef USB_PID_DW3101 |
| #define USB_PID_DW3101 0x3101 |
| #endif |
| |
| #ifndef USB_PID_CINERGY_S |
| #define USB_PID_CINERGY_S 0x0064 |
| #endif |
| |
| #ifndef USB_PID_TEVII_S650 |
| #define USB_PID_TEVII_S650 0xd650 |
| #endif |
| |
| #ifndef USB_PID_TEVII_S630 |
| #define USB_PID_TEVII_S630 0xd630 |
| #endif |
| |
| #define DW210X_READ_MSG 0 |
| #define DW210X_WRITE_MSG 1 |
| |
| #define REG_1F_SYMBOLRATE_BYTE0 0x1f |
| #define REG_20_SYMBOLRATE_BYTE1 0x20 |
| #define REG_21_SYMBOLRATE_BYTE2 0x21 |
| /* on my own*/ |
| #define DW2102_VOLTAGE_CTRL (0x1800) |
| #define DW2102_RC_QUERY (0x1a00) |
| |
| struct dvb_usb_rc_keys_table { |
| struct dvb_usb_rc_key *rc_keys; |
| int rc_keys_size; |
| }; |
| |
| /* debug */ |
| static int dvb_usb_dw2102_debug; |
| module_param_named(debug, dvb_usb_dw2102_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer 4=rc(or-able))." |
| DVB_USB_DEBUG_STATUS); |
| |
| /* keymaps */ |
| static int ir_keymap; |
| module_param_named(keymap, ir_keymap, int, 0644); |
| MODULE_PARM_DESC(keymap, "set keymap 0=default 1=dvbworld 2=tevii 3=tbs ..."); |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| static int dw210x_op_rw(struct usb_device *dev, u8 request, u16 value, |
| u16 index, u8 * data, u16 len, int flags) |
| { |
| int ret; |
| u8 u8buf[len]; |
| |
| unsigned int pipe = (flags == DW210X_READ_MSG) ? |
| usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0); |
| u8 request_type = (flags == DW210X_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT; |
| |
| if (flags == DW210X_WRITE_MSG) |
| memcpy(u8buf, data, len); |
| ret = usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR, |
| value, index , u8buf, len, 2000); |
| |
| if (flags == DW210X_READ_MSG) |
| memcpy(data, u8buf, len); |
| return ret; |
| } |
| |
| /* I2C */ |
| static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], |
| int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int i = 0, ret = 0; |
| u8 buf6[] = {0x2c, 0x05, 0xc0, 0, 0, 0, 0}; |
| u16 value; |
| |
| if (!d) |
| return -ENODEV; |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| switch (num) { |
| case 2: |
| /* read stv0299 register */ |
| value = msg[0].buf[0];/* register */ |
| for (i = 0; i < msg[1].len; i++) { |
| value = value + i; |
| ret = dw210x_op_rw(d->udev, 0xb5, value, 0, |
| buf6, 2, DW210X_READ_MSG); |
| msg[1].buf[i] = buf6[0]; |
| } |
| break; |
| case 1: |
| switch (msg[0].addr) { |
| case 0x68: |
| /* write to stv0299 register */ |
| buf6[0] = 0x2a; |
| buf6[1] = msg[0].buf[0]; |
| buf6[2] = msg[0].buf[1]; |
| ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, |
| buf6, 3, DW210X_WRITE_MSG); |
| break; |
| case 0x60: |
| if (msg[0].flags == 0) { |
| /* write to tuner pll */ |
| buf6[0] = 0x2c; |
| buf6[1] = 5; |
| buf6[2] = 0xc0; |
| buf6[3] = msg[0].buf[0]; |
| buf6[4] = msg[0].buf[1]; |
| buf6[5] = msg[0].buf[2]; |
| buf6[6] = msg[0].buf[3]; |
| ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, |
| buf6, 7, DW210X_WRITE_MSG); |
| } else { |
| /* read from tuner */ |
| ret = dw210x_op_rw(d->udev, 0xb5, 0, 0, |
| buf6, 1, DW210X_READ_MSG); |
| msg[0].buf[0] = buf6[0]; |
| } |
| break; |
| case (DW2102_RC_QUERY): |
| ret = dw210x_op_rw(d->udev, 0xb8, 0, 0, |
| buf6, 2, DW210X_READ_MSG); |
| msg[0].buf[0] = buf6[0]; |
| msg[0].buf[1] = buf6[1]; |
| break; |
| case (DW2102_VOLTAGE_CTRL): |
| buf6[0] = 0x30; |
| buf6[1] = msg[0].buf[0]; |
| ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, |
| buf6, 2, DW210X_WRITE_MSG); |
| break; |
| } |
| |
| break; |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return num; |
| } |
| |
| static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap, |
| struct i2c_msg msg[], int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int ret = 0; |
| u8 buf6[] = {0, 0, 0, 0, 0, 0, 0}; |
| |
| if (!d) |
| return -ENODEV; |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| switch (num) { |
| case 2: |
| /* read si2109 register by number */ |
| buf6[0] = 0xd0; |
| buf6[1] = msg[0].len; |
| buf6[2] = msg[0].buf[0]; |
| ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| buf6, msg[0].len + 2, DW210X_WRITE_MSG); |
| /* read si2109 register */ |
| ret = dw210x_op_rw(d->udev, 0xc3, 0xd0, 0, |
| buf6, msg[1].len + 2, DW210X_READ_MSG); |
| memcpy(msg[1].buf, buf6 + 2, msg[1].len); |
| |
| break; |
| case 1: |
| switch (msg[0].addr) { |
| case 0x68: |
| /* write to si2109 register */ |
| buf6[0] = 0xd0; |
| buf6[1] = msg[0].len; |
| memcpy(buf6 + 2, msg[0].buf, msg[0].len); |
| ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, buf6, |
| msg[0].len + 2, DW210X_WRITE_MSG); |
| break; |
| case(DW2102_RC_QUERY): |
| ret = dw210x_op_rw(d->udev, 0xb8, 0, 0, |
| buf6, 2, DW210X_READ_MSG); |
| msg[0].buf[0] = buf6[0]; |
| msg[0].buf[1] = buf6[1]; |
| break; |
| case(DW2102_VOLTAGE_CTRL): |
| buf6[0] = 0x30; |
| buf6[1] = msg[0].buf[0]; |
| ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, |
| buf6, 2, DW210X_WRITE_MSG); |
| break; |
| } |
| break; |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return num; |
| } |
| |
| static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int ret = 0; |
| |
| if (!d) |
| return -ENODEV; |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| switch (num) { |
| case 2: { |
| /* read */ |
| /* first write first register number */ |
| u8 ibuf[msg[1].len + 2], obuf[3]; |
| obuf[0] = 0xd0; |
| obuf[1] = msg[0].len; |
| obuf[2] = msg[0].buf[0]; |
| ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| obuf, msg[0].len + 2, DW210X_WRITE_MSG); |
| /* second read registers */ |
| ret = dw210x_op_rw(d->udev, 0xc3, 0xd1 , 0, |
| ibuf, msg[1].len + 2, DW210X_READ_MSG); |
| memcpy(msg[1].buf, ibuf + 2, msg[1].len); |
| |
| break; |
| } |
| case 1: |
| switch (msg[0].addr) { |
| case 0x68: { |
| /* write to register */ |
| u8 obuf[msg[0].len + 2]; |
| obuf[0] = 0xd0; |
| obuf[1] = msg[0].len; |
| memcpy(obuf + 2, msg[0].buf, msg[0].len); |
| ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| obuf, msg[0].len + 2, DW210X_WRITE_MSG); |
| break; |
| } |
| case 0x61: { |
| /* write to tuner */ |
| u8 obuf[msg[0].len + 2]; |
| obuf[0] = 0xc2; |
| obuf[1] = msg[0].len; |
| memcpy(obuf + 2, msg[0].buf, msg[0].len); |
| ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| obuf, msg[0].len + 2, DW210X_WRITE_MSG); |
| break; |
| } |
| case(DW2102_RC_QUERY): { |
| u8 ibuf[2]; |
| ret = dw210x_op_rw(d->udev, 0xb8, 0, 0, |
| ibuf, 2, DW210X_READ_MSG); |
| memcpy(msg[0].buf, ibuf , 2); |
| break; |
| } |
| case(DW2102_VOLTAGE_CTRL): { |
| u8 obuf[2]; |
| obuf[0] = 0x30; |
| obuf[1] = msg[0].buf[0]; |
| ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, |
| obuf, 2, DW210X_WRITE_MSG); |
| break; |
| } |
| } |
| |
| break; |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return num; |
| } |
| |
| static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int ret = 0; |
| int len, i; |
| |
| if (!d) |
| return -ENODEV; |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| switch (num) { |
| case 2: { |
| /* read */ |
| /* first write first register number */ |
| u8 ibuf[msg[1].len + 2], obuf[3]; |
| obuf[0] = 0xaa; |
| obuf[1] = msg[0].len; |
| obuf[2] = msg[0].buf[0]; |
| ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| obuf, msg[0].len + 2, DW210X_WRITE_MSG); |
| /* second read registers */ |
| ret = dw210x_op_rw(d->udev, 0xc3, 0xab , 0, |
| ibuf, msg[1].len + 2, DW210X_READ_MSG); |
| memcpy(msg[1].buf, ibuf + 2, msg[1].len); |
| |
| break; |
| } |
| case 1: |
| switch (msg[0].addr) { |
| case 0x55: { |
| if (msg[0].buf[0] == 0xf7) { |
| /* firmware */ |
| /* Write in small blocks */ |
| u8 obuf[19]; |
| obuf[0] = 0xaa; |
| obuf[1] = 0x11; |
| obuf[2] = 0xf7; |
| len = msg[0].len - 1; |
| i = 1; |
| do { |
| memcpy(obuf + 3, msg[0].buf + i, (len > 16 ? 16 : len)); |
| ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| obuf, (len > 16 ? 16 : len) + 3, DW210X_WRITE_MSG); |
| i += 16; |
| len -= 16; |
| } while (len > 0); |
| } else { |
| /* write to register */ |
| u8 obuf[msg[0].len + 2]; |
| obuf[0] = 0xaa; |
| obuf[1] = msg[0].len; |
| memcpy(obuf + 2, msg[0].buf, msg[0].len); |
| ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| obuf, msg[0].len + 2, DW210X_WRITE_MSG); |
| } |
| break; |
| } |
| case(DW2102_RC_QUERY): { |
| u8 ibuf[2]; |
| ret = dw210x_op_rw(d->udev, 0xb8, 0, 0, |
| ibuf, 2, DW210X_READ_MSG); |
| memcpy(msg[0].buf, ibuf , 2); |
| break; |
| } |
| case(DW2102_VOLTAGE_CTRL): { |
| u8 obuf[2]; |
| obuf[0] = 0x30; |
| obuf[1] = msg[0].buf[0]; |
| ret = dw210x_op_rw(d->udev, 0xb2, 0, 0, |
| obuf, 2, DW210X_WRITE_MSG); |
| break; |
| } |
| } |
| |
| break; |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return num; |
| } |
| |
| static int dw3101_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], |
| int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int ret = 0, i; |
| |
| if (!d) |
| return -ENODEV; |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| switch (num) { |
| case 2: { |
| /* read */ |
| /* first write first register number */ |
| u8 ibuf[msg[1].len + 2], obuf[3]; |
| obuf[0] = msg[0].addr << 1; |
| obuf[1] = msg[0].len; |
| obuf[2] = msg[0].buf[0]; |
| ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| obuf, msg[0].len + 2, DW210X_WRITE_MSG); |
| /* second read registers */ |
| ret = dw210x_op_rw(d->udev, 0xc3, 0x19 , 0, |
| ibuf, msg[1].len + 2, DW210X_READ_MSG); |
| memcpy(msg[1].buf, ibuf + 2, msg[1].len); |
| |
| break; |
| } |
| case 1: |
| switch (msg[0].addr) { |
| case 0x60: |
| case 0x0c: { |
| /* write to register */ |
| u8 obuf[msg[0].len + 2]; |
| obuf[0] = msg[0].addr << 1; |
| obuf[1] = msg[0].len; |
| memcpy(obuf + 2, msg[0].buf, msg[0].len); |
| ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| obuf, msg[0].len + 2, DW210X_WRITE_MSG); |
| break; |
| } |
| case(DW2102_RC_QUERY): { |
| u8 ibuf[2]; |
| ret = dw210x_op_rw(d->udev, 0xb8, 0, 0, |
| ibuf, 2, DW210X_READ_MSG); |
| memcpy(msg[0].buf, ibuf , 2); |
| break; |
| } |
| } |
| |
| break; |
| } |
| |
| for (i = 0; i < num; i++) { |
| deb_xfer("%02x:%02x: %s ", i, msg[i].addr, |
| msg[i].flags == 0 ? ">>>" : "<<<"); |
| debug_dump(msg[i].buf, msg[i].len, deb_xfer); |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return num; |
| } |
| |
| static int s630_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], |
| int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int ret = 0; |
| |
| if (!d) |
| return -ENODEV; |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| switch (num) { |
| case 2: { /* read */ |
| u8 ibuf[msg[1].len], obuf[3]; |
| obuf[0] = msg[1].len; |
| obuf[1] = (msg[0].addr << 1); |
| obuf[2] = msg[0].buf[0]; |
| |
| ret = dw210x_op_rw(d->udev, 0x90, 0, 0, |
| obuf, 3, DW210X_WRITE_MSG); |
| msleep(5); |
| ret = dw210x_op_rw(d->udev, 0x91, 0, 0, |
| ibuf, msg[1].len, DW210X_READ_MSG); |
| memcpy(msg[1].buf, ibuf, msg[1].len); |
| break; |
| } |
| case 1: |
| switch (msg[0].addr) { |
| case 0x60: |
| case 0x0e: { |
| /* write to zl10313, zl10039 register, */ |
| u8 obuf[msg[0].len + 2]; |
| obuf[0] = msg[0].len + 1; |
| obuf[1] = (msg[0].addr << 1); |
| memcpy(obuf + 2, msg[0].buf, msg[0].len); |
| ret = dw210x_op_rw(d->udev, 0x80, 0, 0, |
| obuf, msg[0].len + 2, DW210X_WRITE_MSG); |
| break; |
| } |
| case (DW2102_RC_QUERY): { |
| u8 ibuf[4]; |
| ret = dw210x_op_rw(d->udev, 0xb8, 0, 0, |
| ibuf, 4, DW210X_READ_MSG); |
| msg[0].buf[0] = ibuf[3]; |
| break; |
| } |
| case (DW2102_VOLTAGE_CTRL): { |
| u8 obuf[2]; |
| obuf[0] = 0x03; |
| obuf[1] = msg[0].buf[0]; |
| ret = dw210x_op_rw(d->udev, 0x8a, 0, 0, |
| obuf, 2, DW210X_WRITE_MSG); |
| break; |
| } |
| } |
| |
| break; |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return num; |
| } |
| |
| static u32 dw210x_i2c_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C; |
| } |
| |
| static struct i2c_algorithm dw2102_i2c_algo = { |
| .master_xfer = dw2102_i2c_transfer, |
| .functionality = dw210x_i2c_func, |
| }; |
| |
| static struct i2c_algorithm dw2102_serit_i2c_algo = { |
| .master_xfer = dw2102_serit_i2c_transfer, |
| .functionality = dw210x_i2c_func, |
| }; |
| |
| static struct i2c_algorithm dw2102_earda_i2c_algo = { |
| .master_xfer = dw2102_earda_i2c_transfer, |
| .functionality = dw210x_i2c_func, |
| }; |
| |
| static struct i2c_algorithm dw2104_i2c_algo = { |
| .master_xfer = dw2104_i2c_transfer, |
| .functionality = dw210x_i2c_func, |
| }; |
| |
| static struct i2c_algorithm dw3101_i2c_algo = { |
| .master_xfer = dw3101_i2c_transfer, |
| .functionality = dw210x_i2c_func, |
| }; |
| |
| static struct i2c_algorithm s630_i2c_algo = { |
| .master_xfer = s630_i2c_transfer, |
| .functionality = dw210x_i2c_func, |
| }; |
| |
| static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) |
| { |
| int i; |
| u8 ibuf[] = {0, 0}; |
| u8 eeprom[256], eepromline[16]; |
| |
| for (i = 0; i < 256; i++) { |
| if (dw210x_op_rw(d->udev, 0xb6, 0xa0 , i, ibuf, 2, DW210X_READ_MSG) < 0) { |
| err("read eeprom failed."); |
| return -1; |
| } else { |
| eepromline[i%16] = ibuf[0]; |
| eeprom[i] = ibuf[0]; |
| } |
| if ((i % 16) == 15) { |
| deb_xfer("%02x: ", i - 15); |
| debug_dump(eepromline, 16, deb_xfer); |
| } |
| } |
| |
| memcpy(mac, eeprom + 8, 6); |
| return 0; |
| }; |
| |
| static int s630_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) |
| { |
| int i, ret; |
| u8 buf[3], eeprom[256], eepromline[16]; |
| |
| for (i = 0; i < 256; i++) { |
| buf[0] = 1; |
| buf[1] = 0xa0; |
| buf[2] = i; |
| ret = dw210x_op_rw(d->udev, 0x90, 0, 0, |
| buf, 3, DW210X_WRITE_MSG); |
| ret = dw210x_op_rw(d->udev, 0x91, 0, 0, |
| buf, 1, DW210X_READ_MSG); |
| if (ret < 0) { |
| err("read eeprom failed."); |
| return -1; |
| } else { |
| eepromline[i % 16] = buf[0]; |
| eeprom[i] = buf[0]; |
| } |
| |
| if ((i % 16) == 15) { |
| deb_xfer("%02x: ", i - 15); |
| debug_dump(eepromline, 16, deb_xfer); |
| } |
| } |
| |
| memcpy(mac, eeprom + 16, 6); |
| return 0; |
| }; |
| |
| static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) |
| { |
| static u8 command_13v[1] = {0x00}; |
| static u8 command_18v[1] = {0x01}; |
| struct i2c_msg msg[] = { |
| {.addr = DW2102_VOLTAGE_CTRL, .flags = 0, |
| .buf = command_13v, .len = 1}, |
| }; |
| |
| struct dvb_usb_adapter *udev_adap = |
| (struct dvb_usb_adapter *)(fe->dvb->priv); |
| if (voltage == SEC_VOLTAGE_18) |
| msg[0].buf = command_18v; |
| i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1); |
| return 0; |
| } |
| |
| static struct stv0299_config sharp_z0194a_config = { |
| .demod_address = 0x68, |
| .inittab = sharp_z0194a_inittab, |
| .mclk = 88000000UL, |
| .invert = 1, |
| .skip_reinit = 0, |
| .lock_output = STV0299_LOCKOUTPUT_1, |
| .volt13_op0_op1 = STV0299_VOLT13_OP1, |
| .min_delay_ms = 100, |
| .set_symbol_rate = sharp_z0194a_set_symbol_rate, |
| }; |
| |
| static struct cx24116_config dw2104_config = { |
| .demod_address = 0x55, |
| .mpg_clk_pos_pol = 0x01, |
| }; |
| |
| static struct si21xx_config serit_sp1511lhb_config = { |
| .demod_address = 0x68, |
| .min_delay_ms = 100, |
| |
| }; |
| |
| static struct tda10023_config dw3101_tda10023_config = { |
| .demod_address = 0x0c, |
| .invert = 1, |
| }; |
| |
| static struct mt312_config zl313_config = { |
| .demod_address = 0x0e, |
| }; |
| |
| static int dw2104_frontend_attach(struct dvb_usb_adapter *d) |
| { |
| if ((d->fe = dvb_attach(cx24116_attach, &dw2104_config, |
| &d->dev->i2c_adap)) != NULL) { |
| d->fe->ops.set_voltage = dw210x_set_voltage; |
| info("Attached cx24116!\n"); |
| return 0; |
| } |
| return -EIO; |
| } |
| |
| static struct dvb_usb_device_properties dw2102_properties; |
| static struct dvb_usb_device_properties dw2104_properties; |
| |
| static int dw2102_frontend_attach(struct dvb_usb_adapter *d) |
| { |
| if (dw2102_properties.i2c_algo == &dw2102_serit_i2c_algo) { |
| /*dw2102_properties.adapter->tuner_attach = NULL;*/ |
| d->fe = dvb_attach(si21xx_attach, &serit_sp1511lhb_config, |
| &d->dev->i2c_adap); |
| if (d->fe != NULL) { |
| d->fe->ops.set_voltage = dw210x_set_voltage; |
| info("Attached si21xx!\n"); |
| return 0; |
| } |
| } |
| if (dw2102_properties.i2c_algo == &dw2102_earda_i2c_algo) { |
| /*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/ |
| d->fe = dvb_attach(stv0288_attach, &earda_config, |
| &d->dev->i2c_adap); |
| if (d->fe != NULL) { |
| d->fe->ops.set_voltage = dw210x_set_voltage; |
| info("Attached stv0288!\n"); |
| return 0; |
| } |
| } |
| |
| if (dw2102_properties.i2c_algo == &dw2102_i2c_algo) { |
| /*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/ |
| d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config, |
| &d->dev->i2c_adap); |
| if (d->fe != NULL) { |
| d->fe->ops.set_voltage = dw210x_set_voltage; |
| info("Attached stv0299!\n"); |
| return 0; |
| } |
| } |
| return -EIO; |
| } |
| |
| static int dw3101_frontend_attach(struct dvb_usb_adapter *d) |
| { |
| d->fe = dvb_attach(tda10023_attach, &dw3101_tda10023_config, |
| &d->dev->i2c_adap, 0x48); |
| if (d->fe != NULL) { |
| info("Attached tda10023!\n"); |
| return 0; |
| } |
| return -EIO; |
| } |
| |
| static int s630_frontend_attach(struct dvb_usb_adapter *d) |
| { |
| d->fe = dvb_attach(mt312_attach, &zl313_config, |
| &d->dev->i2c_adap); |
| if (d->fe != NULL) { |
| d->fe->ops.set_voltage = dw210x_set_voltage; |
| info("Attached zl10313!\n"); |
| return 0; |
| } |
| return -EIO; |
| } |
| |
| static int dw2102_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(dvb_pll_attach, adap->fe, 0x60, |
| &adap->dev->i2c_adap, DVB_PLL_OPERA1); |
| return 0; |
| } |
| |
| static int dw2102_earda_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(stb6000_attach, adap->fe, 0x61, |
| &adap->dev->i2c_adap); |
| |
| return 0; |
| } |
| |
| static int dw3101_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(dvb_pll_attach, adap->fe, 0x60, |
| &adap->dev->i2c_adap, DVB_PLL_TUA6034); |
| |
| return 0; |
| } |
| |
| static int s630_zl10039_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(zl10039_attach, adap->fe, 0x60, |
| &adap->dev->i2c_adap); |
| |
| return 0; |
| } |
| |
| static struct dvb_usb_rc_key dw210x_rc_keys[] = { |
| { 0xf8, 0x0a, KEY_Q }, /*power*/ |
| { 0xf8, 0x0c, KEY_M }, /*mute*/ |
| { 0xf8, 0x11, KEY_1 }, |
| { 0xf8, 0x12, KEY_2 }, |
| { 0xf8, 0x13, KEY_3 }, |
| { 0xf8, 0x14, KEY_4 }, |
| { 0xf8, 0x15, KEY_5 }, |
| { 0xf8, 0x16, KEY_6 }, |
| { 0xf8, 0x17, KEY_7 }, |
| { 0xf8, 0x18, KEY_8 }, |
| { 0xf8, 0x19, KEY_9 }, |
| { 0xf8, 0x10, KEY_0 }, |
| { 0xf8, 0x1c, KEY_PAGEUP }, /*ch+*/ |
| { 0xf8, 0x0f, KEY_PAGEDOWN }, /*ch-*/ |
| { 0xf8, 0x1a, KEY_O }, /*vol+*/ |
| { 0xf8, 0x0e, KEY_Z }, /*vol-*/ |
| { 0xf8, 0x04, KEY_R }, /*rec*/ |
| { 0xf8, 0x09, KEY_D }, /*fav*/ |
| { 0xf8, 0x08, KEY_BACKSPACE }, /*rewind*/ |
| { 0xf8, 0x07, KEY_A }, /*fast*/ |
| { 0xf8, 0x0b, KEY_P }, /*pause*/ |
| { 0xf8, 0x02, KEY_ESC }, /*cancel*/ |
| { 0xf8, 0x03, KEY_G }, /*tab*/ |
| { 0xf8, 0x00, KEY_UP }, /*up*/ |
| { 0xf8, 0x1f, KEY_ENTER }, /*ok*/ |
| { 0xf8, 0x01, KEY_DOWN }, /*down*/ |
| { 0xf8, 0x05, KEY_C }, /*cap*/ |
| { 0xf8, 0x06, KEY_S }, /*stop*/ |
| { 0xf8, 0x40, KEY_F }, /*full*/ |
| { 0xf8, 0x1e, KEY_W }, /*tvmode*/ |
| { 0xf8, 0x1b, KEY_B }, /*recall*/ |
| }; |
| |
| static struct dvb_usb_rc_key tevii_rc_keys[] = { |
| { 0xf8, 0x0a, KEY_POWER }, |
| { 0xf8, 0x0c, KEY_MUTE }, |
| { 0xf8, 0x11, KEY_1 }, |
| { 0xf8, 0x12, KEY_2 }, |
| { 0xf8, 0x13, KEY_3 }, |
| { 0xf8, 0x14, KEY_4 }, |
| { 0xf8, 0x15, KEY_5 }, |
| { 0xf8, 0x16, KEY_6 }, |
| { 0xf8, 0x17, KEY_7 }, |
| { 0xf8, 0x18, KEY_8 }, |
| { 0xf8, 0x19, KEY_9 }, |
| { 0xf8, 0x10, KEY_0 }, |
| { 0xf8, 0x1c, KEY_MENU }, |
| { 0xf8, 0x0f, KEY_VOLUMEDOWN }, |
| { 0xf8, 0x1a, KEY_LAST }, |
| { 0xf8, 0x0e, KEY_OPEN }, |
| { 0xf8, 0x04, KEY_RECORD }, |
| { 0xf8, 0x09, KEY_VOLUMEUP }, |
| { 0xf8, 0x08, KEY_CHANNELUP }, |
| { 0xf8, 0x07, KEY_PVR }, |
| { 0xf8, 0x0b, KEY_TIME }, |
| { 0xf8, 0x02, KEY_RIGHT }, |
| { 0xf8, 0x03, KEY_LEFT }, |
| { 0xf8, 0x00, KEY_UP }, |
| { 0xf8, 0x1f, KEY_OK }, |
| { 0xf8, 0x01, KEY_DOWN }, |
| { 0xf8, 0x05, KEY_TUNER }, |
| { 0xf8, 0x06, KEY_CHANNELDOWN }, |
| { 0xf8, 0x40, KEY_PLAYPAUSE }, |
| { 0xf8, 0x1e, KEY_REWIND }, |
| { 0xf8, 0x1b, KEY_FAVORITES }, |
| { 0xf8, 0x1d, KEY_BACK }, |
| { 0xf8, 0x4d, KEY_FASTFORWARD }, |
| { 0xf8, 0x44, KEY_EPG }, |
| { 0xf8, 0x4c, KEY_INFO }, |
| { 0xf8, 0x41, KEY_AB }, |
| { 0xf8, 0x43, KEY_AUDIO }, |
| { 0xf8, 0x45, KEY_SUBTITLE }, |
| { 0xf8, 0x4a, KEY_LIST }, |
| { 0xf8, 0x46, KEY_F1 }, |
| { 0xf8, 0x47, KEY_F2 }, |
| { 0xf8, 0x5e, KEY_F3 }, |
| { 0xf8, 0x5c, KEY_F4 }, |
| { 0xf8, 0x52, KEY_F5 }, |
| { 0xf8, 0x5a, KEY_F6 }, |
| { 0xf8, 0x56, KEY_MODE }, |
| { 0xf8, 0x58, KEY_SWITCHVIDEOMODE }, |
| }; |
| |
| static struct dvb_usb_rc_key tbs_rc_keys[] = { |
| { 0xf8, 0x84, KEY_POWER }, |
| { 0xf8, 0x94, KEY_MUTE }, |
| { 0xf8, 0x87, KEY_1 }, |
| { 0xf8, 0x86, KEY_2 }, |
| { 0xf8, 0x85, KEY_3 }, |
| { 0xf8, 0x8b, KEY_4 }, |
| { 0xf8, 0x8a, KEY_5 }, |
| { 0xf8, 0x89, KEY_6 }, |
| { 0xf8, 0x8f, KEY_7 }, |
| { 0xf8, 0x8e, KEY_8 }, |
| { 0xf8, 0x8d, KEY_9 }, |
| { 0xf8, 0x92, KEY_0 }, |
| { 0xf8, 0x96, KEY_CHANNELUP }, |
| { 0xf8, 0x91, KEY_CHANNELDOWN }, |
| { 0xf8, 0x93, KEY_VOLUMEUP }, |
| { 0xf8, 0x8c, KEY_VOLUMEDOWN }, |
| { 0xf8, 0x83, KEY_RECORD }, |
| { 0xf8, 0x98, KEY_PAUSE }, |
| { 0xf8, 0x99, KEY_OK }, |
| { 0xf8, 0x9a, KEY_SHUFFLE }, |
| { 0xf8, 0x81, KEY_UP }, |
| { 0xf8, 0x90, KEY_LEFT }, |
| { 0xf8, 0x82, KEY_RIGHT }, |
| { 0xf8, 0x88, KEY_DOWN }, |
| { 0xf8, 0x95, KEY_FAVORITES }, |
| { 0xf8, 0x97, KEY_SUBTITLE }, |
| { 0xf8, 0x9d, KEY_ZOOM }, |
| { 0xf8, 0x9f, KEY_EXIT }, |
| { 0xf8, 0x9e, KEY_MENU }, |
| { 0xf8, 0x9c, KEY_EPG }, |
| { 0xf8, 0x80, KEY_PREVIOUS }, |
| { 0xf8, 0x9b, KEY_MODE } |
| }; |
| |
| static struct dvb_usb_rc_keys_table keys_tables[] = { |
| { dw210x_rc_keys, ARRAY_SIZE(dw210x_rc_keys) }, |
| { tevii_rc_keys, ARRAY_SIZE(tevii_rc_keys) }, |
| { tbs_rc_keys, ARRAY_SIZE(tbs_rc_keys) }, |
| }; |
| |
| static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state) |
| { |
| struct dvb_usb_rc_key *keymap = d->props.rc_key_map; |
| int keymap_size = d->props.rc_key_map_size; |
| u8 key[2]; |
| struct i2c_msg msg = { |
| .addr = DW2102_RC_QUERY, |
| .flags = I2C_M_RD, |
| .buf = key, |
| .len = 2 |
| }; |
| int i; |
| /* override keymap */ |
| if ((ir_keymap > 0) && (ir_keymap <= ARRAY_SIZE(keys_tables))) { |
| keymap = keys_tables[ir_keymap - 1].rc_keys ; |
| keymap_size = keys_tables[ir_keymap - 1].rc_keys_size; |
| } |
| |
| *state = REMOTE_NO_KEY_PRESSED; |
| if (d->props.i2c_algo->master_xfer(&d->i2c_adap, &msg, 1) == 1) { |
| for (i = 0; i < keymap_size ; i++) { |
| if (keymap[i].data == msg.buf[0]) { |
| *state = REMOTE_KEY_PRESSED; |
| *event = keymap[i].event; |
| break; |
| } |
| |
| } |
| |
| if ((*state) == REMOTE_KEY_PRESSED) |
| deb_rc("%s: found rc key: %x, %x, event: %x\n", |
| __func__, key[0], key[1], (*event)); |
| else if (key[0] != 0xff) |
| deb_rc("%s: unknown rc key: %x, %x\n", |
| __func__, key[0], key[1]); |
| |
| } |
| |
| return 0; |
| } |
| |
| static struct usb_device_id dw2102_table[] = { |
| {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)}, |
| {USB_DEVICE(USB_VID_CYPRESS, 0x2101)}, |
| {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2104)}, |
| {USB_DEVICE(0x9022, USB_PID_TEVII_S650)}, |
| {USB_DEVICE(USB_VID_TERRATEC, USB_PID_CINERGY_S)}, |
| {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW3101)}, |
| {USB_DEVICE(0x9022, USB_PID_TEVII_S630)}, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, dw2102_table); |
| |
| static int dw2102_load_firmware(struct usb_device *dev, |
| const struct firmware *frmwr) |
| { |
| u8 *b, *p; |
| int ret = 0, i; |
| u8 reset; |
| u8 reset16[] = {0, 0, 0, 0, 0, 0, 0}; |
| const struct firmware *fw; |
| const char *filename = "dvb-usb-dw2101.fw"; |
| |
| switch (dev->descriptor.idProduct) { |
| case 0x2101: |
| ret = request_firmware(&fw, filename, &dev->dev); |
| if (ret != 0) { |
| err("did not find the firmware file. (%s) " |
| "Please see linux/Documentation/dvb/ for more details " |
| "on firmware-problems.", filename); |
| return ret; |
| } |
| break; |
| default: |
| fw = frmwr; |
| break; |
| } |
| info("start downloading DW210X firmware"); |
| p = kmalloc(fw->size, GFP_KERNEL); |
| reset = 1; |
| /*stop the CPU*/ |
| dw210x_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, DW210X_WRITE_MSG); |
| dw210x_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, DW210X_WRITE_MSG); |
| |
| if (p != NULL) { |
| memcpy(p, fw->data, fw->size); |
| for (i = 0; i < fw->size; i += 0x40) { |
| b = (u8 *) p + i; |
| if (dw210x_op_rw(dev, 0xa0, i, 0, b , 0x40, |
| DW210X_WRITE_MSG) != 0x40) { |
| err("error while transferring firmware"); |
| ret = -EINVAL; |
| break; |
| } |
| } |
| /* restart the CPU */ |
| reset = 0; |
| if (ret || dw210x_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, |
| DW210X_WRITE_MSG) != 1) { |
| err("could not restart the USB controller CPU."); |
| ret = -EINVAL; |
| } |
| if (ret || dw210x_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, |
| DW210X_WRITE_MSG) != 1) { |
| err("could not restart the USB controller CPU."); |
| ret = -EINVAL; |
| } |
| /* init registers */ |
| switch (dev->descriptor.idProduct) { |
| case USB_PID_TEVII_S650: |
| dw2104_properties.rc_key_map = tevii_rc_keys; |
| dw2104_properties.rc_key_map_size = |
| ARRAY_SIZE(tevii_rc_keys); |
| case USB_PID_DW2104: |
| reset = 1; |
| dw210x_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1, |
| DW210X_WRITE_MSG); |
| /* break omitted intentionally */ |
| case USB_PID_DW3101: |
| reset = 0; |
| dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, |
| DW210X_WRITE_MSG); |
| break; |
| case USB_PID_CINERGY_S: |
| case USB_PID_DW2102: |
| dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, |
| DW210X_WRITE_MSG); |
| dw210x_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2, |
| DW210X_READ_MSG); |
| /* check STV0299 frontend */ |
| dw210x_op_rw(dev, 0xb5, 0, 0, &reset16[0], 2, |
| DW210X_READ_MSG); |
| if ((reset16[0] == 0xa1) || (reset16[0] == 0x80)) { |
| dw2102_properties.i2c_algo = &dw2102_i2c_algo; |
| dw2102_properties.adapter->tuner_attach = &dw2102_tuner_attach; |
| break; |
| } else { |
| /* check STV0288 frontend */ |
| reset16[0] = 0xd0; |
| reset16[1] = 1; |
| reset16[2] = 0; |
| dw210x_op_rw(dev, 0xc2, 0, 0, &reset16[0], 3, |
| DW210X_WRITE_MSG); |
| dw210x_op_rw(dev, 0xc3, 0xd1, 0, &reset16[0], 3, |
| DW210X_READ_MSG); |
| if (reset16[2] == 0x11) { |
| dw2102_properties.i2c_algo = &dw2102_earda_i2c_algo; |
| dw2102_properties.adapter->tuner_attach = &dw2102_earda_tuner_attach; |
| break; |
| } |
| } |
| case 0x2101: |
| dw210x_op_rw(dev, 0xbc, 0x0030, 0, &reset16[0], 2, |
| DW210X_READ_MSG); |
| dw210x_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7, |
| DW210X_READ_MSG); |
| dw210x_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7, |
| DW210X_READ_MSG); |
| dw210x_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2, |
| DW210X_READ_MSG); |
| break; |
| } |
| |
| msleep(100); |
| kfree(p); |
| } |
| return ret; |
| } |
| |
| static struct dvb_usb_device_properties dw2102_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = "dvb-usb-dw2102.fw", |
| .no_reconnect = 1, |
| |
| .i2c_algo = &dw2102_serit_i2c_algo, |
| .rc_key_map = dw210x_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dw210x_rc_keys), |
| .rc_interval = 150, |
| .rc_query = dw2102_rc_query, |
| |
| .generic_bulk_ctrl_endpoint = 0x81, |
| /* parameter for the MPEG2-data transfer */ |
| .num_adapters = 1, |
| .download_firmware = dw2102_load_firmware, |
| .read_mac_address = dw210x_read_mac_address, |
| .adapter = { |
| { |
| .frontend_attach = dw2102_frontend_attach, |
| .streaming_ctrl = NULL, |
| .tuner_attach = NULL, |
| .stream = { |
| .type = USB_BULK, |
| .count = 8, |
| .endpoint = 0x82, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, |
| } |
| } |
| }, |
| } |
| }, |
| .num_device_descs = 3, |
| .devices = { |
| {"DVBWorld DVB-S 2102 USB2.0", |
| {&dw2102_table[0], NULL}, |
| {NULL}, |
| }, |
| {"DVBWorld DVB-S 2101 USB2.0", |
| {&dw2102_table[1], NULL}, |
| {NULL}, |
| }, |
| {"TerraTec Cinergy S USB", |
| {&dw2102_table[4], NULL}, |
| {NULL}, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties dw2104_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = "dvb-usb-dw2104.fw", |
| .no_reconnect = 1, |
| |
| .i2c_algo = &dw2104_i2c_algo, |
| .rc_key_map = dw210x_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dw210x_rc_keys), |
| .rc_interval = 150, |
| .rc_query = dw2102_rc_query, |
| |
| .generic_bulk_ctrl_endpoint = 0x81, |
| /* parameter for the MPEG2-data transfer */ |
| .num_adapters = 1, |
| .download_firmware = dw2102_load_firmware, |
| .read_mac_address = dw210x_read_mac_address, |
| .adapter = { |
| { |
| .frontend_attach = dw2104_frontend_attach, |
| .streaming_ctrl = NULL, |
| /*.tuner_attach = dw2104_tuner_attach,*/ |
| .stream = { |
| .type = USB_BULK, |
| .count = 8, |
| .endpoint = 0x82, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, |
| } |
| } |
| }, |
| } |
| }, |
| .num_device_descs = 2, |
| .devices = { |
| { "DVBWorld DW2104 USB2.0", |
| {&dw2102_table[2], NULL}, |
| {NULL}, |
| }, |
| { "TeVii S650 USB2.0", |
| {&dw2102_table[3], NULL}, |
| {NULL}, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties dw3101_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = "dvb-usb-dw3101.fw", |
| .no_reconnect = 1, |
| |
| .i2c_algo = &dw3101_i2c_algo, |
| .rc_key_map = dw210x_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(dw210x_rc_keys), |
| .rc_interval = 150, |
| .rc_query = dw2102_rc_query, |
| |
| .generic_bulk_ctrl_endpoint = 0x81, |
| /* parameter for the MPEG2-data transfer */ |
| .num_adapters = 1, |
| .download_firmware = dw2102_load_firmware, |
| .read_mac_address = dw210x_read_mac_address, |
| .adapter = { |
| { |
| .frontend_attach = dw3101_frontend_attach, |
| .streaming_ctrl = NULL, |
| .tuner_attach = dw3101_tuner_attach, |
| .stream = { |
| .type = USB_BULK, |
| .count = 8, |
| .endpoint = 0x82, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, |
| } |
| } |
| }, |
| } |
| }, |
| .num_device_descs = 1, |
| .devices = { |
| { "DVBWorld DVB-C 3101 USB2.0", |
| {&dw2102_table[5], NULL}, |
| {NULL}, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties s630_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = "dvb-usb-s630.fw", |
| .no_reconnect = 1, |
| |
| .i2c_algo = &s630_i2c_algo, |
| .rc_key_map = tevii_rc_keys, |
| .rc_key_map_size = ARRAY_SIZE(tevii_rc_keys), |
| .rc_interval = 150, |
| .rc_query = dw2102_rc_query, |
| |
| .generic_bulk_ctrl_endpoint = 0x81, |
| .num_adapters = 1, |
| .download_firmware = dw2102_load_firmware, |
| .read_mac_address = s630_read_mac_address, |
| .adapter = { |
| { |
| .frontend_attach = s630_frontend_attach, |
| .streaming_ctrl = NULL, |
| .tuner_attach = s630_zl10039_tuner_attach, |
| .stream = { |
| .type = USB_BULK, |
| .count = 8, |
| .endpoint = 0x82, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, |
| } |
| } |
| }, |
| } |
| }, |
| .num_device_descs = 1, |
| .devices = { |
| {"TeVii S630 USB", |
| {&dw2102_table[6], NULL}, |
| {NULL}, |
| }, |
| } |
| }; |
| |
| static int dw2102_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| if (0 == dvb_usb_device_init(intf, &dw2102_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &dw2104_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &dw3101_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &s630_properties, |
| THIS_MODULE, NULL, adapter_nr)) { |
| return 0; |
| } |
| return -ENODEV; |
| } |
| |
| static struct usb_driver dw2102_driver = { |
| .name = "dw2102", |
| .probe = dw2102_probe, |
| .disconnect = dvb_usb_device_exit, |
| .id_table = dw2102_table, |
| }; |
| |
| static int __init dw2102_module_init(void) |
| { |
| int ret = usb_register(&dw2102_driver); |
| if (ret) |
| err("usb_register failed. Error number %d", ret); |
| |
| return ret; |
| } |
| |
| static void __exit dw2102_module_exit(void) |
| { |
| usb_deregister(&dw2102_driver); |
| } |
| |
| module_init(dw2102_module_init); |
| module_exit(dw2102_module_exit); |
| |
| MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by"); |
| MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104," |
| " DVB-C 3101 USB2.0," |
| " TeVii S600, S630, S650 USB2.0 devices"); |
| MODULE_VERSION("0.1"); |
| MODULE_LICENSE("GPL"); |