V4L/DVB (12462): Add TeVii S630 USB DVB-S card support.
The card includes Intel ce5039(Zarlink zl10039) tuner
and Intel ce6313 (Zarlink zl10313) demod.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 496c1a3..8b8bc04 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -253,7 +253,7 @@
Afatech AF9005 based receiver.
config DVB_USB_DW2102
- tristate "DvbWorld DVB-S/S2 USB2.0 support"
+ tristate "DvbWorld & TeVii DVB-S/S2 USB2.0 support"
depends on DVB_USB
select DVB_PLL if !DVB_FE_CUSTOMISE
select DVB_STV0299 if !DVB_FE_CUSTOMISE
@@ -262,9 +262,11 @@
select DVB_CX24116 if !DVB_FE_CUSTOMISE
select DVB_SI21XX if !DVB_FE_CUSTOMISE
select DVB_TDA10021 if !DVB_FE_CUSTOMISE
+ select DVB_MT312 if !DVB_FE_CUSTOMISE
+ select DVB_ZL10039 if !DVB_FE_CUSTOMISE
help
Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers
- and the TeVii S650.
+ and the TeVii S650, S630.
config DVB_USB_CINERGY_T2
tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver"
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
index 75de49c..d9424c3 100644
--- a/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -1,6 +1,6 @@
/* DVB USB framework compliant Linux driver for the
* DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101,
-* TeVii S600, S650 Cards
+* TeVii S600, S630, S650 Cards
* Copyright (C) 2008,2009 Igor M. Liplianin (liplianin@me.by)
*
* This program is free software; you can redistribute it and/or modify it
@@ -18,6 +18,8 @@
#include "eds1547.h"
#include "cx24116.h"
#include "tda1002x.h"
+#include "mt312.h"
+#include "zl10039.h"
#ifndef USB_PID_DW2102
#define USB_PID_DW2102 0x2102
@@ -39,6 +41,10 @@
#define USB_PID_TEVII_S650 0xd650
#endif
+#ifndef USB_PID_TEVII_S630
+#define USB_PID_TEVII_S630 0xd630
+#endif
+
#define DW210X_READ_MSG 0
#define DW210X_WRITE_MSG 1
@@ -436,6 +442,69 @@
return num;
}
+static int s630_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int ret = 0;
+
+ if (!d)
+ return -ENODEV;
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ switch (num) {
+ case 2: { /* read */
+ u8 ibuf[msg[1].len], obuf[3];
+ obuf[0] = msg[1].len;
+ obuf[1] = (msg[0].addr << 1);
+ obuf[2] = msg[0].buf[0];
+
+ ret = dw210x_op_rw(d->udev, 0x90, 0, 0,
+ obuf, 3, DW210X_WRITE_MSG);
+ msleep(5);
+ ret = dw210x_op_rw(d->udev, 0x91, 0, 0,
+ ibuf, msg[1].len, DW210X_READ_MSG);
+ memcpy(msg[1].buf, ibuf, msg[1].len);
+ break;
+ }
+ case 1:
+ switch (msg[0].addr) {
+ case 0x60:
+ case 0x0e: {
+ /* write to zl10313, zl10039 register, */
+ u8 obuf[msg[0].len + 2];
+ obuf[0] = msg[0].len + 1;
+ obuf[1] = (msg[0].addr << 1);
+ memcpy(obuf + 2, msg[0].buf, msg[0].len);
+ ret = dw210x_op_rw(d->udev, 0x80, 0, 0,
+ obuf, msg[0].len + 2, DW210X_WRITE_MSG);
+ break;
+ }
+ case (DW2102_RC_QUERY): {
+ u8 ibuf[4];
+ ret = dw210x_op_rw(d->udev, 0xb8, 0, 0,
+ ibuf, 4, DW210X_READ_MSG);
+ msg[0].buf[0] = ibuf[3];
+ break;
+ }
+ case (DW2102_VOLTAGE_CTRL): {
+ u8 obuf[2];
+ obuf[0] = 0x03;
+ obuf[1] = msg[0].buf[0];
+ ret = dw210x_op_rw(d->udev, 0x8a, 0, 0,
+ obuf, 2, DW210X_WRITE_MSG);
+ break;
+ }
+ }
+
+ break;
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+ return num;
+}
+
static u32 dw210x_i2c_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C;
@@ -466,6 +535,11 @@
.functionality = dw210x_i2c_func,
};
+static struct i2c_algorithm s630_i2c_algo = {
+ .master_xfer = s630_i2c_transfer,
+ .functionality = dw210x_i2c_func,
+};
+
static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
{
int i;
@@ -490,6 +564,37 @@
return 0;
};
+static int s630_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
+{
+ int i, ret;
+ u8 buf[3], eeprom[256], eepromline[16];
+
+ for (i = 0; i < 256; i++) {
+ buf[0] = 1;
+ buf[1] = 0xa0;
+ buf[2] = i;
+ ret = dw210x_op_rw(d->udev, 0x90, 0, 0,
+ buf, 3, DW210X_WRITE_MSG);
+ ret = dw210x_op_rw(d->udev, 0x91, 0, 0,
+ buf, 1, DW210X_READ_MSG);
+ if (ret < 0) {
+ err("read eeprom failed.");
+ return -1;
+ } else {
+ eepromline[i % 16] = buf[0];
+ eeprom[i] = buf[0];
+ }
+
+ if ((i % 16) == 15) {
+ deb_xfer("%02x: ", i - 15);
+ debug_dump(eepromline, 16, deb_xfer);
+ }
+ }
+
+ memcpy(mac, eeprom + 16, 6);
+ return 0;
+};
+
static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
static u8 command_13v[1] = {0x00};
@@ -535,6 +640,10 @@
.invert = 1,
};
+static struct mt312_config zl313_config = {
+ .demod_address = 0x0e,
+};
+
static int dw2104_frontend_attach(struct dvb_usb_adapter *d)
{
if ((d->fe = dvb_attach(cx24116_attach, &dw2104_config,
@@ -596,6 +705,18 @@
return -EIO;
}
+static int s630_frontend_attach(struct dvb_usb_adapter *d)
+{
+ d->fe = dvb_attach(mt312_attach, &zl313_config,
+ &d->dev->i2c_adap);
+ if (d->fe != NULL) {
+ d->fe->ops.set_voltage = dw210x_set_voltage;
+ info("Attached zl10313!\n");
+ return 0;
+ }
+ return -EIO;
+}
+
static int dw2102_tuner_attach(struct dvb_usb_adapter *adap)
{
dvb_attach(dvb_pll_attach, adap->fe, 0x60,
@@ -619,6 +740,14 @@
return 0;
}
+static int s630_zl10039_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ dvb_attach(zl10039_attach, adap->fe, 0x60,
+ &adap->dev->i2c_adap);
+
+ return 0;
+}
+
static struct dvb_usb_rc_key dw210x_rc_keys[] = {
{ 0xf8, 0x0a, KEY_Q }, /*power*/
{ 0xf8, 0x0c, KEY_M }, /*mute*/
@@ -763,7 +892,7 @@
}
*state = REMOTE_NO_KEY_PRESSED;
- if (dw2102_i2c_transfer(&d->i2c_adap, &msg, 1) == 1) {
+ if (d->props.i2c_algo->master_xfer(&d->i2c_adap, &msg, 1) == 1) {
for (i = 0; i < keymap_size ; i++) {
if (keymap[i].data == msg.buf[0]) {
*state = REMOTE_KEY_PRESSED;
@@ -792,6 +921,7 @@
{USB_DEVICE(0x9022, USB_PID_TEVII_S650)},
{USB_DEVICE(USB_VID_TERRATEC, USB_PID_CINERGY_S)},
{USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW3101)},
+ {USB_DEVICE(0x9022, USB_PID_TEVII_S630)},
{ }
};
@@ -806,6 +936,7 @@
u8 reset16[] = {0, 0, 0, 0, 0, 0, 0};
const struct firmware *fw;
const char *filename = "dvb-usb-dw2101.fw";
+
switch (dev->descriptor.idProduct) {
case 0x2101:
ret = request_firmware(&fw, filename, &dev->dev);
@@ -1053,6 +1184,48 @@
}
};
+static struct dvb_usb_device_properties s630_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .firmware = "dvb-usb-s630.fw",
+ .no_reconnect = 1,
+
+ .i2c_algo = &s630_i2c_algo,
+ .rc_key_map = tevii_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(tevii_rc_keys),
+ .rc_interval = 150,
+ .rc_query = dw2102_rc_query,
+
+ .generic_bulk_ctrl_endpoint = 0x81,
+ .num_adapters = 1,
+ .download_firmware = dw2102_load_firmware,
+ .read_mac_address = s630_read_mac_address,
+ .adapter = {
+ {
+ .frontend_attach = s630_frontend_attach,
+ .streaming_ctrl = NULL,
+ .tuner_attach = s630_zl10039_tuner_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
+ }
+ },
+ .num_device_descs = 1,
+ .devices = {
+ {"TeVii S630 USB",
+ {&dw2102_table[6], NULL},
+ {NULL},
+ },
+ }
+};
+
static int dw2102_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
@@ -1061,6 +1234,8 @@
0 == dvb_usb_device_init(intf, &dw2104_properties,
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &dw3101_properties,
+ THIS_MODULE, NULL, adapter_nr) ||
+ 0 == dvb_usb_device_init(intf, &s630_properties,
THIS_MODULE, NULL, adapter_nr)) {
return 0;
}
@@ -1094,6 +1269,6 @@
MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by");
MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104,"
" DVB-C 3101 USB2.0,"
- " TeVii S600, S650 USB2.0 devices");
+ " TeVii S600, S630, S650 USB2.0 devices");
MODULE_VERSION("0.1");
MODULE_LICENSE("GPL");