| /* |
| * Apple Onboard Audio driver for tas codec |
| * |
| * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> |
| * |
| * GPL v2, can be found in COPYING. |
| * |
| * Open questions: |
| * - How to distinguish between 3004 and versions? |
| * |
| * FIXMEs: |
| * - This codec driver doesn't honour the 'connected' |
| * property of the aoa_codec struct, hence if |
| * it is used in machines where not everything is |
| * connected it will display wrong mixer elements. |
| * - Driver assumes that the microphone is always |
| * monaureal and connected to the right channel of |
| * the input. This should also be a codec-dependent |
| * flag, maybe the codec should have 3 different |
| * bits for the three different possibilities how |
| * it can be hooked up... |
| * But as long as I don't see any hardware hooked |
| * up that way... |
| * - As Apple notes in their code, the tas3004 seems |
| * to delay the right channel by one sample. You can |
| * see this when for example recording stereo in |
| * audacity, or recording the tas output via cable |
| * on another machine (use a sinus generator or so). |
| * I tried programming the BiQuads but couldn't |
| * make the delay work, maybe someone can read the |
| * datasheet and fix it. The relevant Apple comment |
| * is in AppleTAS3004Audio.cpp lines 1637 ff. Note |
| * that their comment describing how they program |
| * the filters sucks... |
| * |
| * Other things: |
| * - this should actually register *two* aoa_codec |
| * structs since it has two inputs. Then it must |
| * use the prepare callback to forbid running the |
| * secondary output on a different clock. |
| * Also, whatever bus knows how to do this must |
| * provide two soundbus_dev devices and the fabric |
| * must be able to link them correctly. |
| * |
| * I don't even know if Apple ever uses the second |
| * port on the tas3004 though, I don't think their |
| * i2s controllers can even do it. OTOH, they all |
| * derive the clocks from common clocks, so it |
| * might just be possible. The framework allows the |
| * codec to refine the transfer_info items in the |
| * usable callback, so we can simply remove the |
| * rates the second instance is not using when it |
| * actually is in use. |
| * Maybe we'll need to make the sound busses have |
| * a 'clock group id' value so the codec can |
| * determine if the two outputs can be driven at |
| * the same time. But that is likely overkill, up |
| * to the fabric to not link them up incorrectly, |
| * and up to the hardware designer to not wire |
| * them up in some weird unusable way. |
| */ |
| #include <stddef.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c-dev.h> |
| #include <asm/pmac_low_i2c.h> |
| #include <asm/prom.h> |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| |
| MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("tas codec driver for snd-aoa"); |
| |
| #include "snd-aoa-codec-tas.h" |
| #include "snd-aoa-codec-tas-gain-table.h" |
| #include "snd-aoa-codec-tas-basstreble.h" |
| #include "../aoa.h" |
| #include "../soundbus/soundbus.h" |
| |
| #define PFX "snd-aoa-codec-tas: " |
| |
| |
| struct tas { |
| struct aoa_codec codec; |
| struct i2c_client i2c; |
| u32 mute_l:1, mute_r:1 , |
| controls_created:1 , |
| drc_enabled:1, |
| hw_enabled:1; |
| u8 cached_volume_l, cached_volume_r; |
| u8 mixer_l[3], mixer_r[3]; |
| u8 bass, treble; |
| u8 acr; |
| int drc_range; |
| /* protects hardware access against concurrency from |
| * userspace when hitting controls and during |
| * codec init/suspend/resume */ |
| struct mutex mtx; |
| }; |
| |
| static int tas_reset_init(struct tas *tas); |
| |
| static struct tas *codec_to_tas(struct aoa_codec *codec) |
| { |
| return container_of(codec, struct tas, codec); |
| } |
| |
| static inline int tas_write_reg(struct tas *tas, u8 reg, u8 len, u8 *data) |
| { |
| if (len == 1) |
| return i2c_smbus_write_byte_data(&tas->i2c, reg, *data); |
| else |
| return i2c_smbus_write_i2c_block_data(&tas->i2c, reg, len, data); |
| } |
| |
| static void tas3004_set_drc(struct tas *tas) |
| { |
| unsigned char val[6]; |
| |
| if (tas->drc_enabled) |
| val[0] = 0x50; /* 3:1 above threshold */ |
| else |
| val[0] = 0x51; /* disabled */ |
| val[1] = 0x02; /* 1:1 below threshold */ |
| if (tas->drc_range > 0xef) |
| val[2] = 0xef; |
| else if (tas->drc_range < 0) |
| val[2] = 0x00; |
| else |
| val[2] = tas->drc_range; |
| val[3] = 0xb0; |
| val[4] = 0x60; |
| val[5] = 0xa0; |
| |
| tas_write_reg(tas, TAS_REG_DRC, 6, val); |
| } |
| |
| static void tas_set_treble(struct tas *tas) |
| { |
| u8 tmp; |
| |
| tmp = tas3004_treble(tas->treble); |
| tas_write_reg(tas, TAS_REG_TREBLE, 1, &tmp); |
| } |
| |
| static void tas_set_bass(struct tas *tas) |
| { |
| u8 tmp; |
| |
| tmp = tas3004_bass(tas->bass); |
| tas_write_reg(tas, TAS_REG_BASS, 1, &tmp); |
| } |
| |
| static void tas_set_volume(struct tas *tas) |
| { |
| u8 block[6]; |
| int tmp; |
| u8 left, right; |
| |
| left = tas->cached_volume_l; |
| right = tas->cached_volume_r; |
| |
| if (left > 177) left = 177; |
| if (right > 177) right = 177; |
| |
| if (tas->mute_l) left = 0; |
| if (tas->mute_r) right = 0; |
| |
| /* analysing the volume and mixer tables shows |
| * that they are similar enough when we shift |
| * the mixer table down by 4 bits. The error |
| * is miniscule, in just one item the error |
| * is 1, at a value of 0x07f17b (mixer table |
| * value is 0x07f17a) */ |
| tmp = tas_gaintable[left]; |
| block[0] = tmp>>20; |
| block[1] = tmp>>12; |
| block[2] = tmp>>4; |
| tmp = tas_gaintable[right]; |
| block[3] = tmp>>20; |
| block[4] = tmp>>12; |
| block[5] = tmp>>4; |
| tas_write_reg(tas, TAS_REG_VOL, 6, block); |
| } |
| |
| static void tas_set_mixer(struct tas *tas) |
| { |
| u8 block[9]; |
| int tmp, i; |
| u8 val; |
| |
| for (i=0;i<3;i++) { |
| val = tas->mixer_l[i]; |
| if (val > 177) val = 177; |
| tmp = tas_gaintable[val]; |
| block[3*i+0] = tmp>>16; |
| block[3*i+1] = tmp>>8; |
| block[3*i+2] = tmp; |
| } |
| tas_write_reg(tas, TAS_REG_LMIX, 9, block); |
| |
| for (i=0;i<3;i++) { |
| val = tas->mixer_r[i]; |
| if (val > 177) val = 177; |
| tmp = tas_gaintable[val]; |
| block[3*i+0] = tmp>>16; |
| block[3*i+1] = tmp>>8; |
| block[3*i+2] = tmp; |
| } |
| tas_write_reg(tas, TAS_REG_RMIX, 9, block); |
| } |
| |
| /* alsa stuff */ |
| |
| static int tas_dev_register(struct snd_device *dev) |
| { |
| return 0; |
| } |
| |
| static struct snd_device_ops ops = { |
| .dev_register = tas_dev_register, |
| }; |
| |
| static int tas_snd_vol_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = 2; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 177; |
| return 0; |
| } |
| |
| static int tas_snd_vol_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tas *tas = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas->mtx); |
| ucontrol->value.integer.value[0] = tas->cached_volume_l; |
| ucontrol->value.integer.value[1] = tas->cached_volume_r; |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| |
| static int tas_snd_vol_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tas *tas = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas->mtx); |
| if (tas->cached_volume_l == ucontrol->value.integer.value[0] |
| && tas->cached_volume_r == ucontrol->value.integer.value[1]) { |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| |
| tas->cached_volume_l = ucontrol->value.integer.value[0]; |
| tas->cached_volume_r = ucontrol->value.integer.value[1]; |
| if (tas->hw_enabled) |
| tas_set_volume(tas); |
| mutex_unlock(&tas->mtx); |
| return 1; |
| } |
| |
| static struct snd_kcontrol_new volume_control = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Master Playback Volume", |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .info = tas_snd_vol_info, |
| .get = tas_snd_vol_get, |
| .put = tas_snd_vol_put, |
| }; |
| |
| static int tas_snd_mute_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; |
| uinfo->count = 2; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 1; |
| return 0; |
| } |
| |
| static int tas_snd_mute_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tas *tas = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas->mtx); |
| ucontrol->value.integer.value[0] = !tas->mute_l; |
| ucontrol->value.integer.value[1] = !tas->mute_r; |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| |
| static int tas_snd_mute_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tas *tas = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas->mtx); |
| if (tas->mute_l == !ucontrol->value.integer.value[0] |
| && tas->mute_r == !ucontrol->value.integer.value[1]) { |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| |
| tas->mute_l = !ucontrol->value.integer.value[0]; |
| tas->mute_r = !ucontrol->value.integer.value[1]; |
| if (tas->hw_enabled) |
| tas_set_volume(tas); |
| mutex_unlock(&tas->mtx); |
| return 1; |
| } |
| |
| static struct snd_kcontrol_new mute_control = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Master Playback Switch", |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .info = tas_snd_mute_info, |
| .get = tas_snd_mute_get, |
| .put = tas_snd_mute_put, |
| }; |
| |
| static int tas_snd_mixer_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = 2; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 177; |
| return 0; |
| } |
| |
| static int tas_snd_mixer_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tas *tas = snd_kcontrol_chip(kcontrol); |
| int idx = kcontrol->private_value; |
| |
| mutex_lock(&tas->mtx); |
| ucontrol->value.integer.value[0] = tas->mixer_l[idx]; |
| ucontrol->value.integer.value[1] = tas->mixer_r[idx]; |
| mutex_unlock(&tas->mtx); |
| |
| return 0; |
| } |
| |
| static int tas_snd_mixer_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tas *tas = snd_kcontrol_chip(kcontrol); |
| int idx = kcontrol->private_value; |
| |
| mutex_lock(&tas->mtx); |
| if (tas->mixer_l[idx] == ucontrol->value.integer.value[0] |
| && tas->mixer_r[idx] == ucontrol->value.integer.value[1]) { |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| |
| tas->mixer_l[idx] = ucontrol->value.integer.value[0]; |
| tas->mixer_r[idx] = ucontrol->value.integer.value[1]; |
| |
| if (tas->hw_enabled) |
| tas_set_mixer(tas); |
| mutex_unlock(&tas->mtx); |
| return 1; |
| } |
| |
| #define MIXER_CONTROL(n,descr,idx) \ |
| static struct snd_kcontrol_new n##_control = { \ |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ |
| .name = descr " Playback Volume", \ |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \ |
| .info = tas_snd_mixer_info, \ |
| .get = tas_snd_mixer_get, \ |
| .put = tas_snd_mixer_put, \ |
| .private_value = idx, \ |
| } |
| |
| MIXER_CONTROL(pcm1, "PCM", 0); |
| MIXER_CONTROL(monitor, "Monitor", 2); |
| |
| static int tas_snd_drc_range_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = 1; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = TAS3004_DRC_MAX; |
| return 0; |
| } |
| |
| static int tas_snd_drc_range_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tas *tas = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas->mtx); |
| ucontrol->value.integer.value[0] = tas->drc_range; |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| |
| static int tas_snd_drc_range_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tas *tas = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas->mtx); |
| if (tas->drc_range == ucontrol->value.integer.value[0]) { |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| |
| tas->drc_range = ucontrol->value.integer.value[0]; |
| if (tas->hw_enabled) |
| tas3004_set_drc(tas); |
| mutex_unlock(&tas->mtx); |
| return 1; |
| } |
| |
| static struct snd_kcontrol_new drc_range_control = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "DRC Range", |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .info = tas_snd_drc_range_info, |
| .get = tas_snd_drc_range_get, |
| .put = tas_snd_drc_range_put, |
| }; |
| |
| static int tas_snd_drc_switch_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; |
| uinfo->count = 1; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 1; |
| return 0; |
| } |
| |
| static int tas_snd_drc_switch_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tas *tas = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas->mtx); |
| ucontrol->value.integer.value[0] = tas->drc_enabled; |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| |
| static int tas_snd_drc_switch_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tas *tas = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas->mtx); |
| if (tas->drc_enabled == ucontrol->value.integer.value[0]) { |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| |
| tas->drc_enabled = ucontrol->value.integer.value[0]; |
| if (tas->hw_enabled) |
| tas3004_set_drc(tas); |
| mutex_unlock(&tas->mtx); |
| return 1; |
| } |
| |
| static struct snd_kcontrol_new drc_switch_control = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "DRC Range Switch", |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .info = tas_snd_drc_switch_info, |
| .get = tas_snd_drc_switch_get, |
| .put = tas_snd_drc_switch_put, |
| }; |
| |
| static int tas_snd_capture_source_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| static char *texts[] = { "Line-In", "Microphone" }; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = 2; |
| if (uinfo->value.enumerated.item > 1) |
| uinfo->value.enumerated.item = 1; |
| strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| static int tas_snd_capture_source_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tas *tas = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas->mtx); |
| ucontrol->value.enumerated.item[0] = !!(tas->acr & TAS_ACR_INPUT_B); |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| |
| static int tas_snd_capture_source_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tas *tas = snd_kcontrol_chip(kcontrol); |
| int oldacr; |
| |
| mutex_lock(&tas->mtx); |
| oldacr = tas->acr; |
| |
| /* |
| * Despite what the data sheet says in one place, the |
| * TAS_ACR_B_MONAUREAL bit forces mono output even when |
| * input A (line in) is selected. |
| */ |
| tas->acr &= ~(TAS_ACR_INPUT_B | TAS_ACR_B_MONAUREAL); |
| if (ucontrol->value.enumerated.item[0]) |
| tas->acr |= TAS_ACR_INPUT_B | TAS_ACR_B_MONAUREAL | |
| TAS_ACR_B_MON_SEL_RIGHT; |
| if (oldacr == tas->acr) { |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| if (tas->hw_enabled) |
| tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr); |
| mutex_unlock(&tas->mtx); |
| return 1; |
| } |
| |
| static struct snd_kcontrol_new capture_source_control = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| /* If we name this 'Input Source', it properly shows up in |
| * alsamixer as a selection, * but it's shown under the |
| * 'Playback' category. |
| * If I name it 'Capture Source', it shows up in strange |
| * ways (two bools of which one can be selected at a |
| * time) but at least it's shown in the 'Capture' |
| * category. |
| * I was told that this was due to backward compatibility, |
| * but I don't understand then why the mangling is *not* |
| * done when I name it "Input Source"..... |
| */ |
| .name = "Capture Source", |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .info = tas_snd_capture_source_info, |
| .get = tas_snd_capture_source_get, |
| .put = tas_snd_capture_source_put, |
| }; |
| |
| static int tas_snd_treble_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = 1; |
| uinfo->value.integer.min = TAS3004_TREBLE_MIN; |
| uinfo->value.integer.max = TAS3004_TREBLE_MAX; |
| return 0; |
| } |
| |
| static int tas_snd_treble_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tas *tas = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas->mtx); |
| ucontrol->value.integer.value[0] = tas->treble; |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| |
| static int tas_snd_treble_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tas *tas = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas->mtx); |
| if (tas->treble == ucontrol->value.integer.value[0]) { |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| |
| tas->treble = ucontrol->value.integer.value[0]; |
| if (tas->hw_enabled) |
| tas_set_treble(tas); |
| mutex_unlock(&tas->mtx); |
| return 1; |
| } |
| |
| static struct snd_kcontrol_new treble_control = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Treble", |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .info = tas_snd_treble_info, |
| .get = tas_snd_treble_get, |
| .put = tas_snd_treble_put, |
| }; |
| |
| static int tas_snd_bass_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = 1; |
| uinfo->value.integer.min = TAS3004_BASS_MIN; |
| uinfo->value.integer.max = TAS3004_BASS_MAX; |
| return 0; |
| } |
| |
| static int tas_snd_bass_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tas *tas = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas->mtx); |
| ucontrol->value.integer.value[0] = tas->bass; |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| |
| static int tas_snd_bass_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tas *tas = snd_kcontrol_chip(kcontrol); |
| |
| mutex_lock(&tas->mtx); |
| if (tas->bass == ucontrol->value.integer.value[0]) { |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| |
| tas->bass = ucontrol->value.integer.value[0]; |
| if (tas->hw_enabled) |
| tas_set_bass(tas); |
| mutex_unlock(&tas->mtx); |
| return 1; |
| } |
| |
| static struct snd_kcontrol_new bass_control = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Bass", |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .info = tas_snd_bass_info, |
| .get = tas_snd_bass_get, |
| .put = tas_snd_bass_put, |
| }; |
| |
| static struct transfer_info tas_transfers[] = { |
| { |
| /* input */ |
| .formats = SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S16_BE | |
| SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S24_BE, |
| .rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000, |
| .transfer_in = 1, |
| }, |
| { |
| /* output */ |
| .formats = SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S16_BE | |
| SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S24_BE, |
| .rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000, |
| .transfer_in = 0, |
| }, |
| {} |
| }; |
| |
| static int tas_usable(struct codec_info_item *cii, |
| struct transfer_info *ti, |
| struct transfer_info *out) |
| { |
| return 1; |
| } |
| |
| static int tas_reset_init(struct tas *tas) |
| { |
| u8 tmp; |
| |
| tas->codec.gpio->methods->all_amps_off(tas->codec.gpio); |
| msleep(5); |
| tas->codec.gpio->methods->set_hw_reset(tas->codec.gpio, 0); |
| msleep(5); |
| tas->codec.gpio->methods->set_hw_reset(tas->codec.gpio, 1); |
| msleep(20); |
| tas->codec.gpio->methods->set_hw_reset(tas->codec.gpio, 0); |
| msleep(10); |
| tas->codec.gpio->methods->all_amps_restore(tas->codec.gpio); |
| |
| tmp = TAS_MCS_SCLK64 | TAS_MCS_SPORT_MODE_I2S | TAS_MCS_SPORT_WL_24BIT; |
| if (tas_write_reg(tas, TAS_REG_MCS, 1, &tmp)) |
| goto outerr; |
| |
| tas->acr |= TAS_ACR_ANALOG_PDOWN; |
| if (tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr)) |
| goto outerr; |
| |
| tmp = 0; |
| if (tas_write_reg(tas, TAS_REG_MCS2, 1, &tmp)) |
| goto outerr; |
| |
| tas3004_set_drc(tas); |
| |
| /* Set treble & bass to 0dB */ |
| tas->treble = TAS3004_TREBLE_ZERO; |
| tas->bass = TAS3004_BASS_ZERO; |
| tas_set_treble(tas); |
| tas_set_bass(tas); |
| |
| tas->acr &= ~TAS_ACR_ANALOG_PDOWN; |
| if (tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr)) |
| goto outerr; |
| |
| return 0; |
| outerr: |
| return -ENODEV; |
| } |
| |
| static int tas_switch_clock(struct codec_info_item *cii, enum clock_switch clock) |
| { |
| struct tas *tas = cii->codec_data; |
| |
| switch(clock) { |
| case CLOCK_SWITCH_PREPARE_SLAVE: |
| /* Clocks are going away, mute mute mute */ |
| tas->codec.gpio->methods->all_amps_off(tas->codec.gpio); |
| tas->hw_enabled = 0; |
| break; |
| case CLOCK_SWITCH_SLAVE: |
| /* Clocks are back, re-init the codec */ |
| mutex_lock(&tas->mtx); |
| tas_reset_init(tas); |
| tas_set_volume(tas); |
| tas_set_mixer(tas); |
| tas->hw_enabled = 1; |
| tas->codec.gpio->methods->all_amps_restore(tas->codec.gpio); |
| mutex_unlock(&tas->mtx); |
| break; |
| default: |
| /* doesn't happen as of now */ |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /* we are controlled via i2c and assume that is always up |
| * If that wasn't the case, we'd have to suspend once |
| * our i2c device is suspended, and then take note of that! */ |
| static int tas_suspend(struct tas *tas) |
| { |
| mutex_lock(&tas->mtx); |
| tas->hw_enabled = 0; |
| tas->acr |= TAS_ACR_ANALOG_PDOWN; |
| tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr); |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| |
| static int tas_resume(struct tas *tas) |
| { |
| /* reset codec */ |
| mutex_lock(&tas->mtx); |
| tas_reset_init(tas); |
| tas_set_volume(tas); |
| tas_set_mixer(tas); |
| tas->hw_enabled = 1; |
| mutex_unlock(&tas->mtx); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int _tas_suspend(struct codec_info_item *cii, pm_message_t state) |
| { |
| return tas_suspend(cii->codec_data); |
| } |
| |
| static int _tas_resume(struct codec_info_item *cii) |
| { |
| return tas_resume(cii->codec_data); |
| } |
| #endif |
| |
| static struct codec_info tas_codec_info = { |
| .transfers = tas_transfers, |
| /* in theory, we can drive it at 512 too... |
| * but so far the framework doesn't allow |
| * for that and I don't see much point in it. */ |
| .sysclock_factor = 256, |
| /* same here, could be 32 for just one 16 bit format */ |
| .bus_factor = 64, |
| .owner = THIS_MODULE, |
| .usable = tas_usable, |
| .switch_clock = tas_switch_clock, |
| #ifdef CONFIG_PM |
| .suspend = _tas_suspend, |
| .resume = _tas_resume, |
| #endif |
| }; |
| |
| static int tas_init_codec(struct aoa_codec *codec) |
| { |
| struct tas *tas = codec_to_tas(codec); |
| int err; |
| |
| if (!tas->codec.gpio || !tas->codec.gpio->methods) { |
| printk(KERN_ERR PFX "gpios not assigned!!\n"); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&tas->mtx); |
| if (tas_reset_init(tas)) { |
| printk(KERN_ERR PFX "tas failed to initialise\n"); |
| mutex_unlock(&tas->mtx); |
| return -ENXIO; |
| } |
| tas->hw_enabled = 1; |
| mutex_unlock(&tas->mtx); |
| |
| if (tas->codec.soundbus_dev->attach_codec(tas->codec.soundbus_dev, |
| aoa_get_card(), |
| &tas_codec_info, tas)) { |
| printk(KERN_ERR PFX "error attaching tas to soundbus\n"); |
| return -ENODEV; |
| } |
| |
| if (aoa_snd_device_new(SNDRV_DEV_LOWLEVEL, tas, &ops)) { |
| printk(KERN_ERR PFX "failed to create tas snd device!\n"); |
| return -ENODEV; |
| } |
| err = aoa_snd_ctl_add(snd_ctl_new1(&volume_control, tas)); |
| if (err) |
| goto error; |
| |
| err = aoa_snd_ctl_add(snd_ctl_new1(&mute_control, tas)); |
| if (err) |
| goto error; |
| |
| err = aoa_snd_ctl_add(snd_ctl_new1(&pcm1_control, tas)); |
| if (err) |
| goto error; |
| |
| err = aoa_snd_ctl_add(snd_ctl_new1(&monitor_control, tas)); |
| if (err) |
| goto error; |
| |
| err = aoa_snd_ctl_add(snd_ctl_new1(&capture_source_control, tas)); |
| if (err) |
| goto error; |
| |
| err = aoa_snd_ctl_add(snd_ctl_new1(&drc_range_control, tas)); |
| if (err) |
| goto error; |
| |
| err = aoa_snd_ctl_add(snd_ctl_new1(&drc_switch_control, tas)); |
| if (err) |
| goto error; |
| |
| err = aoa_snd_ctl_add(snd_ctl_new1(&treble_control, tas)); |
| if (err) |
| goto error; |
| |
| err = aoa_snd_ctl_add(snd_ctl_new1(&bass_control, tas)); |
| if (err) |
| goto error; |
| |
| return 0; |
| error: |
| tas->codec.soundbus_dev->detach_codec(tas->codec.soundbus_dev, tas); |
| snd_device_free(aoa_get_card(), tas); |
| return err; |
| } |
| |
| static void tas_exit_codec(struct aoa_codec *codec) |
| { |
| struct tas *tas = codec_to_tas(codec); |
| |
| if (!tas->codec.soundbus_dev) |
| return; |
| tas->codec.soundbus_dev->detach_codec(tas->codec.soundbus_dev, tas); |
| } |
| |
| |
| static struct i2c_driver tas_driver; |
| |
| static int tas_create(struct i2c_adapter *adapter, |
| struct device_node *node, |
| int addr) |
| { |
| struct tas *tas; |
| |
| tas = kzalloc(sizeof(struct tas), GFP_KERNEL); |
| |
| if (!tas) |
| return -ENOMEM; |
| |
| mutex_init(&tas->mtx); |
| tas->i2c.driver = &tas_driver; |
| tas->i2c.adapter = adapter; |
| tas->i2c.addr = addr; |
| /* seems that half is a saner default */ |
| tas->drc_range = TAS3004_DRC_MAX / 2; |
| strlcpy(tas->i2c.name, "tas audio codec", I2C_NAME_SIZE-1); |
| |
| if (i2c_attach_client(&tas->i2c)) { |
| printk(KERN_ERR PFX "failed to attach to i2c\n"); |
| goto fail; |
| } |
| |
| strlcpy(tas->codec.name, "tas", MAX_CODEC_NAME_LEN-1); |
| tas->codec.owner = THIS_MODULE; |
| tas->codec.init = tas_init_codec; |
| tas->codec.exit = tas_exit_codec; |
| tas->codec.node = of_node_get(node); |
| |
| if (aoa_codec_register(&tas->codec)) { |
| goto detach; |
| } |
| printk(KERN_DEBUG |
| "snd-aoa-codec-tas: tas found, addr 0x%02x on %s\n", |
| addr, node->full_name); |
| return 0; |
| detach: |
| i2c_detach_client(&tas->i2c); |
| fail: |
| mutex_destroy(&tas->mtx); |
| kfree(tas); |
| return -EINVAL; |
| } |
| |
| static int tas_i2c_attach(struct i2c_adapter *adapter) |
| { |
| struct device_node *busnode, *dev = NULL; |
| struct pmac_i2c_bus *bus; |
| |
| bus = pmac_i2c_adapter_to_bus(adapter); |
| if (bus == NULL) |
| return -ENODEV; |
| busnode = pmac_i2c_get_bus_node(bus); |
| |
| while ((dev = of_get_next_child(busnode, dev)) != NULL) { |
| if (device_is_compatible(dev, "tas3004")) { |
| u32 *addr; |
| printk(KERN_DEBUG PFX "found tas3004\n"); |
| addr = (u32 *) get_property(dev, "reg", NULL); |
| if (!addr) |
| continue; |
| return tas_create(adapter, dev, ((*addr) >> 1) & 0x7f); |
| } |
| /* older machines have no 'codec' node with a 'compatible' |
| * property that says 'tas3004', they just have a 'deq' |
| * node without any such property... */ |
| if (strcmp(dev->name, "deq") == 0) { |
| u32 *_addr, addr; |
| printk(KERN_DEBUG PFX "found 'deq' node\n"); |
| _addr = (u32 *) get_property(dev, "i2c-address", NULL); |
| if (!_addr) |
| continue; |
| addr = ((*_addr) >> 1) & 0x7f; |
| /* now, if the address doesn't match any of the two |
| * that a tas3004 can have, we cannot handle this. |
| * I doubt it ever happens but hey. */ |
| if (addr != 0x34 && addr != 0x35) |
| continue; |
| return tas_create(adapter, dev, addr); |
| } |
| } |
| return -ENODEV; |
| } |
| |
| static int tas_i2c_detach(struct i2c_client *client) |
| { |
| struct tas *tas = container_of(client, struct tas, i2c); |
| int err; |
| u8 tmp = TAS_ACR_ANALOG_PDOWN; |
| |
| if ((err = i2c_detach_client(client))) |
| return err; |
| aoa_codec_unregister(&tas->codec); |
| of_node_put(tas->codec.node); |
| |
| /* power down codec chip */ |
| tas_write_reg(tas, TAS_REG_ACR, 1, &tmp); |
| |
| mutex_destroy(&tas->mtx); |
| kfree(tas); |
| return 0; |
| } |
| |
| static struct i2c_driver tas_driver = { |
| .driver = { |
| .name = "aoa_codec_tas", |
| .owner = THIS_MODULE, |
| }, |
| .attach_adapter = tas_i2c_attach, |
| .detach_client = tas_i2c_detach, |
| }; |
| |
| static int __init tas_init(void) |
| { |
| return i2c_add_driver(&tas_driver); |
| } |
| |
| static void __exit tas_exit(void) |
| { |
| i2c_del_driver(&tas_driver); |
| } |
| |
| module_init(tas_init); |
| module_exit(tas_exit); |