| /* |
| * host.c - ChipIdea USB host controller driver |
| * |
| * Copyright (c) 2012 Intel Corporation |
| * |
| * Author: Alexander Shishkin |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/io.h> |
| #include <linux/usb.h> |
| #include <linux/usb/hcd.h> |
| #include <linux/usb/chipidea.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include "../host/ehci.h" |
| |
| #include "ci.h" |
| #include "bits.h" |
| #include "host.h" |
| |
| static struct hc_driver __read_mostly ci_ehci_hc_driver; |
| static int (*orig_bus_suspend)(struct usb_hcd *hcd); |
| |
| struct ehci_ci_priv { |
| struct regulator *reg_vbus; |
| }; |
| |
| static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable) |
| { |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv; |
| struct device *dev = hcd->self.controller; |
| struct ci_hdrc *ci = dev_get_drvdata(dev); |
| int ret = 0; |
| int port = HCS_N_PORTS(ehci->hcs_params); |
| |
| if (priv->reg_vbus) { |
| if (port > 1) { |
| dev_warn(dev, |
| "Not support multi-port regulator control\n"); |
| return 0; |
| } |
| if (enable) |
| ret = regulator_enable(priv->reg_vbus); |
| else |
| ret = regulator_disable(priv->reg_vbus); |
| if (ret) { |
| dev_err(dev, |
| "Failed to %s vbus regulator, ret=%d\n", |
| enable ? "enable" : "disable", ret); |
| return ret; |
| } |
| } |
| |
| if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) { |
| /* |
| * Marvell 28nm HSIC PHY requires forcing the port to HS mode. |
| * As HSIC is always HS, this should be safe for others. |
| */ |
| hw_port_test_set(ci, 5); |
| hw_port_test_set(ci, 0); |
| } |
| return 0; |
| }; |
| |
| static int ehci_ci_reset(struct usb_hcd *hcd) |
| { |
| struct device *dev = hcd->self.controller; |
| struct ci_hdrc *ci = dev_get_drvdata(dev); |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| int ret; |
| |
| ret = ehci_setup(hcd); |
| if (ret) |
| return ret; |
| |
| ehci->need_io_watchdog = 0; |
| |
| if (ci->platdata->notify_event) { |
| ret = ci->platdata->notify_event(ci, |
| CI_HDRC_CONTROLLER_RESET_EVENT); |
| if (ret) |
| return ret; |
| } |
| |
| ci_platform_configure(ci); |
| |
| return ret; |
| } |
| |
| static const struct ehci_driver_overrides ehci_ci_overrides = { |
| .extra_priv_size = sizeof(struct ehci_ci_priv), |
| .port_power = ehci_ci_portpower, |
| .reset = ehci_ci_reset, |
| }; |
| |
| static irqreturn_t host_irq(struct ci_hdrc *ci) |
| { |
| return usb_hcd_irq(ci->irq, ci->hcd); |
| } |
| |
| static int host_start(struct ci_hdrc *ci) |
| { |
| struct usb_hcd *hcd; |
| struct ehci_hcd *ehci; |
| struct ehci_ci_priv *priv; |
| int ret; |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| hcd = usb_create_hcd(&ci_ehci_hc_driver, ci->dev, dev_name(ci->dev)); |
| if (!hcd) |
| return -ENOMEM; |
| |
| dev_set_drvdata(ci->dev, ci); |
| hcd->rsrc_start = ci->hw_bank.phys; |
| hcd->rsrc_len = ci->hw_bank.size; |
| hcd->regs = ci->hw_bank.abs; |
| hcd->has_tt = 1; |
| |
| hcd->power_budget = ci->platdata->power_budget; |
| hcd->tpl_support = ci->platdata->tpl_support; |
| if (ci->phy) |
| hcd->phy = ci->phy; |
| else |
| hcd->usb_phy = ci->usb_phy; |
| |
| ehci = hcd_to_ehci(hcd); |
| ehci->caps = ci->hw_bank.cap; |
| ehci->has_hostpc = ci->hw_bank.lpm; |
| ehci->has_tdi_phy_lpm = ci->hw_bank.lpm; |
| ehci->imx28_write_fix = ci->imx28_write_fix; |
| |
| priv = (struct ehci_ci_priv *)ehci->priv; |
| priv->reg_vbus = NULL; |
| |
| if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) { |
| if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) { |
| ret = regulator_enable(ci->platdata->reg_vbus); |
| if (ret) { |
| dev_err(ci->dev, |
| "Failed to enable vbus regulator, ret=%d\n", |
| ret); |
| goto put_hcd; |
| } |
| } else { |
| priv->reg_vbus = ci->platdata->reg_vbus; |
| } |
| } |
| |
| ret = usb_add_hcd(hcd, 0, 0); |
| if (ret) { |
| goto disable_reg; |
| } else { |
| struct usb_otg *otg = &ci->otg; |
| |
| ci->hcd = hcd; |
| |
| if (ci_otg_is_fsm_mode(ci)) { |
| otg->host = &hcd->self; |
| hcd->self.otg_port = 1; |
| } |
| } |
| |
| return ret; |
| |
| disable_reg: |
| if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) && |
| (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON)) |
| regulator_disable(ci->platdata->reg_vbus); |
| put_hcd: |
| usb_put_hcd(hcd); |
| |
| return ret; |
| } |
| |
| static void host_stop(struct ci_hdrc *ci) |
| { |
| struct usb_hcd *hcd = ci->hcd; |
| |
| if (hcd) { |
| if (ci->platdata->notify_event) |
| ci->platdata->notify_event(ci, |
| CI_HDRC_CONTROLLER_STOPPED_EVENT); |
| usb_remove_hcd(hcd); |
| ci->role = CI_ROLE_END; |
| synchronize_irq(ci->irq); |
| usb_put_hcd(hcd); |
| if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) && |
| (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON)) |
| regulator_disable(ci->platdata->reg_vbus); |
| } |
| ci->hcd = NULL; |
| ci->otg.host = NULL; |
| } |
| |
| |
| void ci_hdrc_host_destroy(struct ci_hdrc *ci) |
| { |
| if (ci->role == CI_ROLE_HOST && ci->hcd) |
| host_stop(ci); |
| } |
| |
| static int ci_ehci_bus_suspend(struct usb_hcd *hcd) |
| { |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| int port; |
| u32 tmp; |
| |
| int ret = orig_bus_suspend(hcd); |
| |
| if (ret) |
| return ret; |
| |
| port = HCS_N_PORTS(ehci->hcs_params); |
| while (port--) { |
| u32 __iomem *reg = &ehci->regs->port_status[port]; |
| u32 portsc = ehci_readl(ehci, reg); |
| |
| if (portsc & PORT_CONNECT) { |
| /* |
| * For chipidea, the resume signal will be ended |
| * automatically, so for remote wakeup case, the |
| * usbcmd.rs may not be set before the resume has |
| * ended if other resume paths consumes too much |
| * time (~24ms), in that case, the SOF will not |
| * send out within 3ms after resume ends, then the |
| * high speed device will enter full speed mode. |
| */ |
| |
| tmp = ehci_readl(ehci, &ehci->regs->command); |
| tmp |= CMD_RUN; |
| ehci_writel(ehci, tmp, &ehci->regs->command); |
| /* |
| * It needs a short delay between set RS bit and PHCD. |
| */ |
| usleep_range(150, 200); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int ci_hdrc_host_init(struct ci_hdrc *ci) |
| { |
| struct ci_role_driver *rdrv; |
| |
| if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_HC)) |
| return -ENXIO; |
| |
| rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL); |
| if (!rdrv) |
| return -ENOMEM; |
| |
| rdrv->start = host_start; |
| rdrv->stop = host_stop; |
| rdrv->irq = host_irq; |
| rdrv->name = "host"; |
| ci->roles[CI_ROLE_HOST] = rdrv; |
| |
| return 0; |
| } |
| |
| void ci_hdrc_host_driver_init(void) |
| { |
| ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides); |
| orig_bus_suspend = ci_ehci_hc_driver.bus_suspend; |
| ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend; |
| } |