| /* |
| * RTC driver for the Armada 38x Marvell SoCs |
| * |
| * Copyright (C) 2015 Marvell |
| * |
| * Gregory Clement <gregory.clement@free-electrons.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/rtc.h> |
| |
| #define RTC_STATUS 0x0 |
| #define RTC_STATUS_ALARM1 BIT(0) |
| #define RTC_STATUS_ALARM2 BIT(1) |
| #define RTC_IRQ1_CONF 0x4 |
| #define RTC_IRQ1_AL_EN BIT(0) |
| #define RTC_IRQ1_FREQ_EN BIT(1) |
| #define RTC_IRQ1_FREQ_1HZ BIT(2) |
| #define RTC_TIME 0xC |
| #define RTC_ALARM1 0x10 |
| |
| #define SOC_RTC_INTERRUPT 0x8 |
| #define SOC_RTC_ALARM1 BIT(0) |
| #define SOC_RTC_ALARM2 BIT(1) |
| #define SOC_RTC_ALARM1_MASK BIT(2) |
| #define SOC_RTC_ALARM2_MASK BIT(3) |
| |
| struct armada38x_rtc { |
| struct rtc_device *rtc_dev; |
| void __iomem *regs; |
| void __iomem *regs_soc; |
| spinlock_t lock; |
| /* |
| * While setting the time, the RTC TIME register should not be |
| * accessed. Setting the RTC time involves sleeping during |
| * 100ms, so a mutex instead of a spinlock is used to protect |
| * it |
| */ |
| struct mutex mutex_time; |
| int irq; |
| }; |
| |
| /* |
| * According to the datasheet, the OS should wait 5us after every |
| * register write to the RTC hard macro so that the required update |
| * can occur without holding off the system bus |
| */ |
| static void rtc_delayed_write(u32 val, struct armada38x_rtc *rtc, int offset) |
| { |
| writel(val, rtc->regs + offset); |
| udelay(5); |
| } |
| |
| static int armada38x_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct armada38x_rtc *rtc = dev_get_drvdata(dev); |
| unsigned long time, time_check, flags; |
| |
| mutex_lock(&rtc->mutex_time); |
| time = readl(rtc->regs + RTC_TIME); |
| /* |
| * WA for failing time set attempts. As stated in HW ERRATA if |
| * more than one second between two time reads is detected |
| * then read once again. |
| */ |
| time_check = readl(rtc->regs + RTC_TIME); |
| if ((time_check - time) > 1) |
| time_check = readl(rtc->regs + RTC_TIME); |
| |
| mutex_unlock(&rtc->mutex_time); |
| |
| rtc_time_to_tm(time_check, tm); |
| |
| return 0; |
| } |
| |
| static int armada38x_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct armada38x_rtc *rtc = dev_get_drvdata(dev); |
| int ret = 0; |
| unsigned long time, flags; |
| |
| ret = rtc_tm_to_time(tm, &time); |
| |
| if (ret) |
| goto out; |
| /* |
| * Setting the RTC time not always succeeds. According to the |
| * errata we need to first write on the status register and |
| * then wait for 100ms before writing to the time register to be |
| * sure that the data will be taken into account. |
| */ |
| mutex_lock(&rtc->mutex_time); |
| rtc_delayed_write(0, rtc, RTC_STATUS); |
| msleep(100); |
| rtc_delayed_write(time, rtc, RTC_TIME); |
| mutex_unlock(&rtc->mutex_time); |
| |
| out: |
| return ret; |
| } |
| |
| static int armada38x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct armada38x_rtc *rtc = dev_get_drvdata(dev); |
| unsigned long time, flags; |
| u32 val; |
| |
| spin_lock_irqsave(&rtc->lock, flags); |
| |
| time = readl(rtc->regs + RTC_ALARM1); |
| val = readl(rtc->regs + RTC_IRQ1_CONF) & RTC_IRQ1_AL_EN; |
| |
| spin_unlock_irqrestore(&rtc->lock, flags); |
| |
| alrm->enabled = val ? 1 : 0; |
| rtc_time_to_tm(time, &alrm->time); |
| |
| return 0; |
| } |
| |
| static int armada38x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct armada38x_rtc *rtc = dev_get_drvdata(dev); |
| unsigned long time, flags; |
| int ret = 0; |
| u32 val; |
| |
| ret = rtc_tm_to_time(&alrm->time, &time); |
| |
| if (ret) |
| goto out; |
| |
| spin_lock_irqsave(&rtc->lock, flags); |
| |
| rtc_delayed_write(time, rtc, RTC_ALARM1); |
| |
| if (alrm->enabled) { |
| rtc_delayed_write(RTC_IRQ1_AL_EN, rtc, RTC_IRQ1_CONF); |
| val = readl(rtc->regs_soc + SOC_RTC_INTERRUPT); |
| writel(val | SOC_RTC_ALARM1_MASK, |
| rtc->regs_soc + SOC_RTC_INTERRUPT); |
| } |
| |
| spin_unlock_irqrestore(&rtc->lock, flags); |
| |
| out: |
| return ret; |
| } |
| |
| static int armada38x_rtc_alarm_irq_enable(struct device *dev, |
| unsigned int enabled) |
| { |
| struct armada38x_rtc *rtc = dev_get_drvdata(dev); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&rtc->lock, flags); |
| |
| if (enabled) |
| rtc_delayed_write(RTC_IRQ1_AL_EN, rtc, RTC_IRQ1_CONF); |
| else |
| rtc_delayed_write(0, rtc, RTC_IRQ1_CONF); |
| |
| spin_unlock_irqrestore(&rtc->lock, flags); |
| |
| return 0; |
| } |
| |
| static irqreturn_t armada38x_rtc_alarm_irq(int irq, void *data) |
| { |
| struct armada38x_rtc *rtc = data; |
| u32 val; |
| int event = RTC_IRQF | RTC_AF; |
| |
| dev_dbg(&rtc->rtc_dev->dev, "%s:irq(%d)\n", __func__, irq); |
| |
| spin_lock(&rtc->lock); |
| |
| val = readl(rtc->regs_soc + SOC_RTC_INTERRUPT); |
| |
| writel(val & ~SOC_RTC_ALARM1, rtc->regs_soc + SOC_RTC_INTERRUPT); |
| val = readl(rtc->regs + RTC_IRQ1_CONF); |
| /* disable all the interrupts for alarm 1 */ |
| rtc_delayed_write(0, rtc, RTC_IRQ1_CONF); |
| /* Ack the event */ |
| rtc_delayed_write(RTC_STATUS_ALARM1, rtc, RTC_STATUS); |
| |
| spin_unlock(&rtc->lock); |
| |
| if (val & RTC_IRQ1_FREQ_EN) { |
| if (val & RTC_IRQ1_FREQ_1HZ) |
| event |= RTC_UF; |
| else |
| event |= RTC_PF; |
| } |
| |
| rtc_update_irq(rtc->rtc_dev, 1, event); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct rtc_class_ops armada38x_rtc_ops = { |
| .read_time = armada38x_rtc_read_time, |
| .set_time = armada38x_rtc_set_time, |
| .read_alarm = armada38x_rtc_read_alarm, |
| .set_alarm = armada38x_rtc_set_alarm, |
| .alarm_irq_enable = armada38x_rtc_alarm_irq_enable, |
| }; |
| |
| static __init int armada38x_rtc_probe(struct platform_device *pdev) |
| { |
| struct resource *res; |
| struct armada38x_rtc *rtc; |
| int ret; |
| |
| rtc = devm_kzalloc(&pdev->dev, sizeof(struct armada38x_rtc), |
| GFP_KERNEL); |
| if (!rtc) |
| return -ENOMEM; |
| |
| spin_lock_init(&rtc->lock); |
| mutex_init(&rtc->mutex_time); |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc"); |
| rtc->regs = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(rtc->regs)) |
| return PTR_ERR(rtc->regs); |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc-soc"); |
| rtc->regs_soc = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(rtc->regs_soc)) |
| return PTR_ERR(rtc->regs_soc); |
| |
| rtc->irq = platform_get_irq(pdev, 0); |
| |
| if (rtc->irq < 0) { |
| dev_err(&pdev->dev, "no irq\n"); |
| return rtc->irq; |
| } |
| if (devm_request_irq(&pdev->dev, rtc->irq, armada38x_rtc_alarm_irq, |
| 0, pdev->name, rtc) < 0) { |
| dev_warn(&pdev->dev, "Interrupt not available.\n"); |
| rtc->irq = -1; |
| /* |
| * If there is no interrupt available then we can't |
| * use the alarm |
| */ |
| armada38x_rtc_ops.set_alarm = NULL; |
| armada38x_rtc_ops.alarm_irq_enable = NULL; |
| } |
| platform_set_drvdata(pdev, rtc); |
| if (rtc->irq != -1) |
| device_init_wakeup(&pdev->dev, 1); |
| |
| rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name, |
| &armada38x_rtc_ops, THIS_MODULE); |
| if (IS_ERR(rtc->rtc_dev)) { |
| ret = PTR_ERR(rtc->rtc_dev); |
| dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret); |
| return ret; |
| } |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int armada38x_rtc_suspend(struct device *dev) |
| { |
| if (device_may_wakeup(dev)) { |
| struct armada38x_rtc *rtc = dev_get_drvdata(dev); |
| |
| return enable_irq_wake(rtc->irq); |
| } |
| |
| return 0; |
| } |
| |
| static int armada38x_rtc_resume(struct device *dev) |
| { |
| if (device_may_wakeup(dev)) { |
| struct armada38x_rtc *rtc = dev_get_drvdata(dev); |
| |
| return disable_irq_wake(rtc->irq); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(armada38x_rtc_pm_ops, |
| armada38x_rtc_suspend, armada38x_rtc_resume); |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id armada38x_rtc_of_match_table[] = { |
| { .compatible = "marvell,armada-380-rtc", }, |
| {} |
| }; |
| #endif |
| |
| static struct platform_driver armada38x_rtc_driver = { |
| .driver = { |
| .name = "armada38x-rtc", |
| .pm = &armada38x_rtc_pm_ops, |
| .of_match_table = of_match_ptr(armada38x_rtc_of_match_table), |
| }, |
| }; |
| |
| module_platform_driver_probe(armada38x_rtc_driver, armada38x_rtc_probe); |
| |
| MODULE_DESCRIPTION("Marvell Armada 38x RTC driver"); |
| MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>"); |
| MODULE_LICENSE("GPL"); |