| /* |
| * Driver for Zarlink DVB-T MT352 demodulator |
| * |
| * Written by Holger Waechtler <holger@qanu.de> |
| * and Daniel Mack <daniel@qanu.de> |
| * |
| * AVerMedia AVerTV DVB-T 771 support by |
| * Wolfram Joost <dbox2@frokaschwei.de> |
| * |
| * Support for Samsung TDTC9251DH01C(M) tuner |
| * Copyright (C) 2004 Antonio Mancuso <antonio.mancuso@digitaltelevision.it> |
| * Amauri Celani <acelani@essegi.net> |
| * |
| * DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by |
| * Christopher Pascoe <c.pascoe@itee.uq.edu.au> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| |
| #include "dvb_frontend.h" |
| #include "mt352_priv.h" |
| #include "mt352.h" |
| |
| struct mt352_state { |
| struct i2c_adapter* i2c; |
| struct dvb_frontend frontend; |
| struct dvb_frontend_ops ops; |
| |
| /* configuration settings */ |
| struct mt352_config config; |
| }; |
| |
| static int debug; |
| #define dprintk(args...) \ |
| do { \ |
| if (debug) printk(KERN_DEBUG "mt352: " args); \ |
| } while (0) |
| |
| static int mt352_single_write(struct dvb_frontend *fe, u8 reg, u8 val) |
| { |
| struct mt352_state* state = fe->demodulator_priv; |
| u8 buf[2] = { reg, val }; |
| struct i2c_msg msg = { .addr = state->config.demod_address, .flags = 0, |
| .buf = buf, .len = 2 }; |
| int err = i2c_transfer(state->i2c, &msg, 1); |
| if (err != 1) { |
| printk("mt352_write() to reg %x failed (err = %d)!\n", reg, err); |
| return err; |
| } |
| return 0; |
| } |
| |
| int mt352_write(struct dvb_frontend* fe, u8* ibuf, int ilen) |
| { |
| int err,i; |
| for (i=0; i < ilen-1; i++) |
| if ((err = mt352_single_write(fe,ibuf[0]+i,ibuf[i+1]))) |
| return err; |
| |
| return 0; |
| } |
| |
| static int mt352_read_register(struct mt352_state* state, u8 reg) |
| { |
| int ret; |
| u8 b0 [] = { reg }; |
| u8 b1 [] = { 0 }; |
| struct i2c_msg msg [] = { { .addr = state->config.demod_address, |
| .flags = 0, |
| .buf = b0, .len = 1 }, |
| { .addr = state->config.demod_address, |
| .flags = I2C_M_RD, |
| .buf = b1, .len = 1 } }; |
| |
| ret = i2c_transfer(state->i2c, msg, 2); |
| |
| if (ret != 2) { |
| printk("%s: readreg error (reg=%d, ret==%i)\n", |
| __FUNCTION__, reg, ret); |
| return ret; |
| } |
| |
| return b1[0]; |
| } |
| |
| static int mt352_sleep(struct dvb_frontend* fe) |
| { |
| static u8 mt352_softdown[] = { CLOCK_CTL, 0x20, 0x08 }; |
| |
| mt352_write(fe, mt352_softdown, sizeof(mt352_softdown)); |
| return 0; |
| } |
| |
| static void mt352_calc_nominal_rate(struct mt352_state* state, |
| enum fe_bandwidth bandwidth, |
| unsigned char *buf) |
| { |
| u32 adc_clock = 20480; /* 20.340 MHz */ |
| u32 bw,value; |
| |
| switch (bandwidth) { |
| case BANDWIDTH_6_MHZ: |
| bw = 6; |
| break; |
| case BANDWIDTH_7_MHZ: |
| bw = 7; |
| break; |
| case BANDWIDTH_8_MHZ: |
| default: |
| bw = 8; |
| break; |
| } |
| if (state->config.adc_clock) |
| adc_clock = state->config.adc_clock; |
| |
| value = 64 * bw * (1<<16) / (7 * 8); |
| value = value * 1000 / adc_clock; |
| dprintk("%s: bw %d, adc_clock %d => 0x%x\n", |
| __FUNCTION__, bw, adc_clock, value); |
| buf[0] = msb(value); |
| buf[1] = lsb(value); |
| } |
| |
| static void mt352_calc_input_freq(struct mt352_state* state, |
| unsigned char *buf) |
| { |
| int adc_clock = 20480; /* 20.480000 MHz */ |
| int if2 = 36167; /* 36.166667 MHz */ |
| int ife,value; |
| |
| if (state->config.adc_clock) |
| adc_clock = state->config.adc_clock; |
| if (state->config.if2) |
| if2 = state->config.if2; |
| |
| ife = (2*adc_clock - if2); |
| value = -16374 * ife / adc_clock; |
| dprintk("%s: if2 %d, ife %d, adc_clock %d => %d / 0x%x\n", |
| __FUNCTION__, if2, ife, adc_clock, value, value & 0x3fff); |
| buf[0] = msb(value); |
| buf[1] = lsb(value); |
| } |
| |
| static int mt352_set_parameters(struct dvb_frontend* fe, |
| struct dvb_frontend_parameters *param) |
| { |
| struct mt352_state* state = fe->demodulator_priv; |
| unsigned char buf[13]; |
| static unsigned char tuner_go[] = { 0x5d, 0x01 }; |
| static unsigned char fsm_go[] = { 0x5e, 0x01 }; |
| unsigned int tps = 0; |
| struct dvb_ofdm_parameters *op = ¶m->u.ofdm; |
| |
| switch (op->code_rate_HP) { |
| case FEC_2_3: |
| tps |= (1 << 7); |
| break; |
| case FEC_3_4: |
| tps |= (2 << 7); |
| break; |
| case FEC_5_6: |
| tps |= (3 << 7); |
| break; |
| case FEC_7_8: |
| tps |= (4 << 7); |
| break; |
| case FEC_1_2: |
| case FEC_AUTO: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (op->code_rate_LP) { |
| case FEC_2_3: |
| tps |= (1 << 4); |
| break; |
| case FEC_3_4: |
| tps |= (2 << 4); |
| break; |
| case FEC_5_6: |
| tps |= (3 << 4); |
| break; |
| case FEC_7_8: |
| tps |= (4 << 4); |
| break; |
| case FEC_1_2: |
| case FEC_AUTO: |
| break; |
| case FEC_NONE: |
| if (op->hierarchy_information == HIERARCHY_AUTO || |
| op->hierarchy_information == HIERARCHY_NONE) |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (op->constellation) { |
| case QPSK: |
| break; |
| case QAM_AUTO: |
| case QAM_16: |
| tps |= (1 << 13); |
| break; |
| case QAM_64: |
| tps |= (2 << 13); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (op->transmission_mode) { |
| case TRANSMISSION_MODE_2K: |
| case TRANSMISSION_MODE_AUTO: |
| break; |
| case TRANSMISSION_MODE_8K: |
| tps |= (1 << 0); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (op->guard_interval) { |
| case GUARD_INTERVAL_1_32: |
| case GUARD_INTERVAL_AUTO: |
| break; |
| case GUARD_INTERVAL_1_16: |
| tps |= (1 << 2); |
| break; |
| case GUARD_INTERVAL_1_8: |
| tps |= (2 << 2); |
| break; |
| case GUARD_INTERVAL_1_4: |
| tps |= (3 << 2); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (op->hierarchy_information) { |
| case HIERARCHY_AUTO: |
| case HIERARCHY_NONE: |
| break; |
| case HIERARCHY_1: |
| tps |= (1 << 10); |
| break; |
| case HIERARCHY_2: |
| tps |= (2 << 10); |
| break; |
| case HIERARCHY_4: |
| tps |= (3 << 10); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| |
| buf[0] = TPS_GIVEN_1; /* TPS_GIVEN_1 and following registers */ |
| |
| buf[1] = msb(tps); /* TPS_GIVEN_(1|0) */ |
| buf[2] = lsb(tps); |
| |
| buf[3] = 0x50; // old |
| // buf[3] = 0xf4; // pinnacle |
| |
| mt352_calc_nominal_rate(state, op->bandwidth, buf+4); |
| mt352_calc_input_freq(state, buf+6); |
| state->config.pll_set(fe, param, buf+8); |
| |
| mt352_write(fe, buf, sizeof(buf)); |
| if (state->config.no_tuner) { |
| /* start decoding */ |
| mt352_write(fe, fsm_go, 2); |
| } else { |
| /* start tuning */ |
| mt352_write(fe, tuner_go, 2); |
| } |
| return 0; |
| } |
| |
| static int mt352_get_parameters(struct dvb_frontend* fe, |
| struct dvb_frontend_parameters *param) |
| { |
| struct mt352_state* state = fe->demodulator_priv; |
| u16 tps; |
| u16 div; |
| u8 trl; |
| struct dvb_ofdm_parameters *op = ¶m->u.ofdm; |
| static const u8 tps_fec_to_api[8] = |
| { |
| FEC_1_2, |
| FEC_2_3, |
| FEC_3_4, |
| FEC_5_6, |
| FEC_7_8, |
| FEC_AUTO, |
| FEC_AUTO, |
| FEC_AUTO |
| }; |
| |
| if ( (mt352_read_register(state,0x00) & 0xC0) != 0xC0 ) |
| return -EINVAL; |
| |
| /* Use TPS_RECEIVED-registers, not the TPS_CURRENT-registers because |
| * the mt352 sometimes works with the wrong parameters |
| */ |
| tps = (mt352_read_register(state, TPS_RECEIVED_1) << 8) | mt352_read_register(state, TPS_RECEIVED_0); |
| div = (mt352_read_register(state, CHAN_START_1) << 8) | mt352_read_register(state, CHAN_START_0); |
| trl = mt352_read_register(state, TRL_NOMINAL_RATE_1); |
| |
| op->code_rate_HP = tps_fec_to_api[(tps >> 7) & 7]; |
| op->code_rate_LP = tps_fec_to_api[(tps >> 4) & 7]; |
| |
| switch ( (tps >> 13) & 3) |
| { |
| case 0: |
| op->constellation = QPSK; |
| break; |
| case 1: |
| op->constellation = QAM_16; |
| break; |
| case 2: |
| op->constellation = QAM_64; |
| break; |
| default: |
| op->constellation = QAM_AUTO; |
| break; |
| } |
| |
| op->transmission_mode = (tps & 0x01) ? TRANSMISSION_MODE_8K : TRANSMISSION_MODE_2K; |
| |
| switch ( (tps >> 2) & 3) |
| { |
| case 0: |
| op->guard_interval = GUARD_INTERVAL_1_32; |
| break; |
| case 1: |
| op->guard_interval = GUARD_INTERVAL_1_16; |
| break; |
| case 2: |
| op->guard_interval = GUARD_INTERVAL_1_8; |
| break; |
| case 3: |
| op->guard_interval = GUARD_INTERVAL_1_4; |
| break; |
| default: |
| op->guard_interval = GUARD_INTERVAL_AUTO; |
| break; |
| } |
| |
| switch ( (tps >> 10) & 7) |
| { |
| case 0: |
| op->hierarchy_information = HIERARCHY_NONE; |
| break; |
| case 1: |
| op->hierarchy_information = HIERARCHY_1; |
| break; |
| case 2: |
| op->hierarchy_information = HIERARCHY_2; |
| break; |
| case 3: |
| op->hierarchy_information = HIERARCHY_4; |
| break; |
| default: |
| op->hierarchy_information = HIERARCHY_AUTO; |
| break; |
| } |
| |
| param->frequency = ( 500 * (div - IF_FREQUENCYx6) ) / 3 * 1000; |
| |
| if (trl == 0x72) |
| op->bandwidth = BANDWIDTH_8_MHZ; |
| else if (trl == 0x64) |
| op->bandwidth = BANDWIDTH_7_MHZ; |
| else |
| op->bandwidth = BANDWIDTH_6_MHZ; |
| |
| |
| if (mt352_read_register(state, STATUS_2) & 0x02) |
| param->inversion = INVERSION_OFF; |
| else |
| param->inversion = INVERSION_ON; |
| |
| return 0; |
| } |
| |
| static int mt352_read_status(struct dvb_frontend* fe, fe_status_t* status) |
| { |
| struct mt352_state* state = fe->demodulator_priv; |
| int s0, s1, s3; |
| |
| /* FIXME: |
| * |
| * The MT352 design manual from Zarlink states (page 46-47): |
| * |
| * Notes about the TUNER_GO register: |
| * |
| * If the Read_Tuner_Byte (bit-1) is activated, then the tuner status |
| * byte is copied from the tuner to the STATUS_3 register and |
| * completion of the read operation is indicated by bit-5 of the |
| * INTERRUPT_3 register. |
| */ |
| |
| if ((s0 = mt352_read_register(state, STATUS_0)) < 0) |
| return -EREMOTEIO; |
| if ((s1 = mt352_read_register(state, STATUS_1)) < 0) |
| return -EREMOTEIO; |
| if ((s3 = mt352_read_register(state, STATUS_3)) < 0) |
| return -EREMOTEIO; |
| |
| *status = 0; |
| if (s0 & (1 << 4)) |
| *status |= FE_HAS_CARRIER; |
| if (s0 & (1 << 1)) |
| *status |= FE_HAS_VITERBI; |
| if (s0 & (1 << 5)) |
| *status |= FE_HAS_LOCK; |
| if (s1 & (1 << 1)) |
| *status |= FE_HAS_SYNC; |
| if (s3 & (1 << 6)) |
| *status |= FE_HAS_SIGNAL; |
| |
| if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != |
| (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) |
| *status &= ~FE_HAS_LOCK; |
| |
| return 0; |
| } |
| |
| static int mt352_read_ber(struct dvb_frontend* fe, u32* ber) |
| { |
| struct mt352_state* state = fe->demodulator_priv; |
| |
| *ber = (mt352_read_register (state, RS_ERR_CNT_2) << 16) | |
| (mt352_read_register (state, RS_ERR_CNT_1) << 8) | |
| (mt352_read_register (state, RS_ERR_CNT_0)); |
| |
| return 0; |
| } |
| |
| static int mt352_read_signal_strength(struct dvb_frontend* fe, u16* strength) |
| { |
| struct mt352_state* state = fe->demodulator_priv; |
| |
| /* align the 12 bit AGC gain with the most significant bits */ |
| u16 signal = ((mt352_read_register(state, AGC_GAIN_1) & 0x0f) << 12) | |
| (mt352_read_register(state, AGC_GAIN_0) << 4); |
| |
| /* inverse of gain is signal strength */ |
| *strength = ~signal; |
| return 0; |
| } |
| |
| static int mt352_read_snr(struct dvb_frontend* fe, u16* snr) |
| { |
| struct mt352_state* state = fe->demodulator_priv; |
| |
| u8 _snr = mt352_read_register (state, SNR); |
| *snr = (_snr << 8) | _snr; |
| |
| return 0; |
| } |
| |
| static int mt352_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) |
| { |
| struct mt352_state* state = fe->demodulator_priv; |
| |
| *ucblocks = (mt352_read_register (state, RS_UBC_1) << 8) | |
| (mt352_read_register (state, RS_UBC_0)); |
| |
| return 0; |
| } |
| |
| static int mt352_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings) |
| { |
| fe_tune_settings->min_delay_ms = 800; |
| fe_tune_settings->step_size = 0; |
| fe_tune_settings->max_drift = 0; |
| |
| return 0; |
| } |
| |
| static int mt352_init(struct dvb_frontend* fe) |
| { |
| struct mt352_state* state = fe->demodulator_priv; |
| |
| static u8 mt352_reset_attach [] = { RESET, 0xC0 }; |
| |
| dprintk("%s: hello\n",__FUNCTION__); |
| |
| if ((mt352_read_register(state, CLOCK_CTL) & 0x10) == 0 || |
| (mt352_read_register(state, CONFIG) & 0x20) == 0) { |
| |
| /* Do a "hard" reset */ |
| mt352_write(fe, mt352_reset_attach, sizeof(mt352_reset_attach)); |
| return state->config.demod_init(fe); |
| } |
| |
| return 0; |
| } |
| |
| static void mt352_release(struct dvb_frontend* fe) |
| { |
| struct mt352_state* state = fe->demodulator_priv; |
| kfree(state); |
| } |
| |
| static struct dvb_frontend_ops mt352_ops; |
| |
| struct dvb_frontend* mt352_attach(const struct mt352_config* config, |
| struct i2c_adapter* i2c) |
| { |
| struct mt352_state* state = NULL; |
| |
| /* allocate memory for the internal state */ |
| state = kmalloc(sizeof(struct mt352_state), GFP_KERNEL); |
| if (state == NULL) goto error; |
| memset(state,0,sizeof(*state)); |
| |
| /* setup the state */ |
| state->i2c = i2c; |
| memcpy(&state->config,config,sizeof(struct mt352_config)); |
| memcpy(&state->ops, &mt352_ops, sizeof(struct dvb_frontend_ops)); |
| |
| /* check if the demod is there */ |
| if (mt352_read_register(state, CHIP_ID) != ID_MT352) goto error; |
| |
| /* create dvb_frontend */ |
| state->frontend.ops = &state->ops; |
| state->frontend.demodulator_priv = state; |
| return &state->frontend; |
| |
| error: |
| kfree(state); |
| return NULL; |
| } |
| |
| static struct dvb_frontend_ops mt352_ops = { |
| |
| .info = { |
| .name = "Zarlink MT352 DVB-T", |
| .type = FE_OFDM, |
| .frequency_min = 174000000, |
| .frequency_max = 862000000, |
| .frequency_stepsize = 166667, |
| .frequency_tolerance = 0, |
| .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | |
| FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | |
| FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | |
| FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER | |
| FE_CAN_MUTE_TS |
| }, |
| |
| .release = mt352_release, |
| |
| .init = mt352_init, |
| .sleep = mt352_sleep, |
| |
| .set_frontend = mt352_set_parameters, |
| .get_frontend = mt352_get_parameters, |
| .get_tune_settings = mt352_get_tune_settings, |
| |
| .read_status = mt352_read_status, |
| .read_ber = mt352_read_ber, |
| .read_signal_strength = mt352_read_signal_strength, |
| .read_snr = mt352_read_snr, |
| .read_ucblocks = mt352_read_ucblocks, |
| }; |
| |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); |
| |
| MODULE_DESCRIPTION("Zarlink MT352 DVB-T Demodulator driver"); |
| MODULE_AUTHOR("Holger Waechtler, Daniel Mack, Antonio Mancuso"); |
| MODULE_LICENSE("GPL"); |
| |
| EXPORT_SYMBOL(mt352_attach); |
| EXPORT_SYMBOL(mt352_write); |