| /* |
| * arch/s390/kernel/setup.c |
| * |
| * S390 version |
| * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation |
| * Author(s): Hartmut Penner (hp@de.ibm.com), |
| * Martin Schwidefsky (schwidefsky@de.ibm.com) |
| * |
| * Derived from "arch/i386/kernel/setup.c" |
| * Copyright (C) 1995, Linus Torvalds |
| */ |
| |
| /* |
| * This file handles the architecture-dependent parts of initialization |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/stddef.h> |
| #include <linux/unistd.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/user.h> |
| #include <linux/a.out.h> |
| #include <linux/tty.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/config.h> |
| #include <linux/init.h> |
| #include <linux/initrd.h> |
| #include <linux/bootmem.h> |
| #include <linux/root_dev.h> |
| #include <linux/console.h> |
| #include <linux/seq_file.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/device.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/system.h> |
| #include <asm/smp.h> |
| #include <asm/mmu_context.h> |
| #include <asm/cpcmd.h> |
| #include <asm/lowcore.h> |
| #include <asm/irq.h> |
| #include <asm/page.h> |
| #include <asm/ptrace.h> |
| |
| /* |
| * Machine setup.. |
| */ |
| unsigned int console_mode = 0; |
| unsigned int console_devno = -1; |
| unsigned int console_irq = -1; |
| unsigned long memory_size = 0; |
| unsigned long machine_flags = 0; |
| struct { |
| unsigned long addr, size, type; |
| } memory_chunk[MEMORY_CHUNKS] = { { 0 } }; |
| #define CHUNK_READ_WRITE 0 |
| #define CHUNK_READ_ONLY 1 |
| volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */ |
| unsigned long __initdata zholes_size[MAX_NR_ZONES]; |
| static unsigned long __initdata memory_end; |
| |
| /* |
| * Setup options |
| */ |
| extern int _text,_etext, _edata, _end; |
| |
| /* |
| * This is set up by the setup-routine at boot-time |
| * for S390 need to find out, what we have to setup |
| * using address 0x10400 ... |
| */ |
| |
| #include <asm/setup.h> |
| |
| static char command_line[COMMAND_LINE_SIZE] = { 0, }; |
| |
| static struct resource code_resource = { |
| .name = "Kernel code", |
| .start = (unsigned long) &_text, |
| .end = (unsigned long) &_etext - 1, |
| .flags = IORESOURCE_BUSY | IORESOURCE_MEM, |
| }; |
| |
| static struct resource data_resource = { |
| .name = "Kernel data", |
| .start = (unsigned long) &_etext, |
| .end = (unsigned long) &_edata - 1, |
| .flags = IORESOURCE_BUSY | IORESOURCE_MEM, |
| }; |
| |
| /* |
| * cpu_init() initializes state that is per-CPU. |
| */ |
| void __devinit cpu_init (void) |
| { |
| int addr = hard_smp_processor_id(); |
| |
| /* |
| * Store processor id in lowcore (used e.g. in timer_interrupt) |
| */ |
| asm volatile ("stidp %0": "=m" (S390_lowcore.cpu_data.cpu_id)); |
| S390_lowcore.cpu_data.cpu_addr = addr; |
| |
| /* |
| * Force FPU initialization: |
| */ |
| clear_thread_flag(TIF_USEDFPU); |
| clear_used_math(); |
| |
| atomic_inc(&init_mm.mm_count); |
| current->active_mm = &init_mm; |
| if (current->mm) |
| BUG(); |
| enter_lazy_tlb(&init_mm, current); |
| } |
| |
| /* |
| * VM halt and poweroff setup routines |
| */ |
| char vmhalt_cmd[128] = ""; |
| char vmpoff_cmd[128] = ""; |
| |
| static inline void strncpy_skip_quote(char *dst, char *src, int n) |
| { |
| int sx, dx; |
| |
| dx = 0; |
| for (sx = 0; src[sx] != 0; sx++) { |
| if (src[sx] == '"') continue; |
| dst[dx++] = src[sx]; |
| if (dx >= n) break; |
| } |
| } |
| |
| static int __init vmhalt_setup(char *str) |
| { |
| strncpy_skip_quote(vmhalt_cmd, str, 127); |
| vmhalt_cmd[127] = 0; |
| return 1; |
| } |
| |
| __setup("vmhalt=", vmhalt_setup); |
| |
| static int __init vmpoff_setup(char *str) |
| { |
| strncpy_skip_quote(vmpoff_cmd, str, 127); |
| vmpoff_cmd[127] = 0; |
| return 1; |
| } |
| |
| __setup("vmpoff=", vmpoff_setup); |
| |
| /* |
| * condev= and conmode= setup parameter. |
| */ |
| |
| static int __init condev_setup(char *str) |
| { |
| int vdev; |
| |
| vdev = simple_strtoul(str, &str, 0); |
| if (vdev >= 0 && vdev < 65536) { |
| console_devno = vdev; |
| console_irq = -1; |
| } |
| return 1; |
| } |
| |
| __setup("condev=", condev_setup); |
| |
| static int __init conmode_setup(char *str) |
| { |
| #if defined(CONFIG_SCLP_CONSOLE) |
| if (strncmp(str, "hwc", 4) == 0 || strncmp(str, "sclp", 5) == 0) |
| SET_CONSOLE_SCLP; |
| #endif |
| #if defined(CONFIG_TN3215_CONSOLE) |
| if (strncmp(str, "3215", 5) == 0) |
| SET_CONSOLE_3215; |
| #endif |
| #if defined(CONFIG_TN3270_CONSOLE) |
| if (strncmp(str, "3270", 5) == 0) |
| SET_CONSOLE_3270; |
| #endif |
| return 1; |
| } |
| |
| __setup("conmode=", conmode_setup); |
| |
| static void __init conmode_default(void) |
| { |
| char query_buffer[1024]; |
| char *ptr; |
| |
| if (MACHINE_IS_VM) { |
| __cpcmd("QUERY CONSOLE", query_buffer, 1024, NULL); |
| console_devno = simple_strtoul(query_buffer + 5, NULL, 16); |
| ptr = strstr(query_buffer, "SUBCHANNEL ="); |
| console_irq = simple_strtoul(ptr + 13, NULL, 16); |
| __cpcmd("QUERY TERM", query_buffer, 1024, NULL); |
| ptr = strstr(query_buffer, "CONMODE"); |
| /* |
| * Set the conmode to 3215 so that the device recognition |
| * will set the cu_type of the console to 3215. If the |
| * conmode is 3270 and we don't set it back then both |
| * 3215 and the 3270 driver will try to access the console |
| * device (3215 as console and 3270 as normal tty). |
| */ |
| __cpcmd("TERM CONMODE 3215", NULL, 0, NULL); |
| if (ptr == NULL) { |
| #if defined(CONFIG_SCLP_CONSOLE) |
| SET_CONSOLE_SCLP; |
| #endif |
| return; |
| } |
| if (strncmp(ptr + 8, "3270", 4) == 0) { |
| #if defined(CONFIG_TN3270_CONSOLE) |
| SET_CONSOLE_3270; |
| #elif defined(CONFIG_TN3215_CONSOLE) |
| SET_CONSOLE_3215; |
| #elif defined(CONFIG_SCLP_CONSOLE) |
| SET_CONSOLE_SCLP; |
| #endif |
| } else if (strncmp(ptr + 8, "3215", 4) == 0) { |
| #if defined(CONFIG_TN3215_CONSOLE) |
| SET_CONSOLE_3215; |
| #elif defined(CONFIG_TN3270_CONSOLE) |
| SET_CONSOLE_3270; |
| #elif defined(CONFIG_SCLP_CONSOLE) |
| SET_CONSOLE_SCLP; |
| #endif |
| } |
| } else if (MACHINE_IS_P390) { |
| #if defined(CONFIG_TN3215_CONSOLE) |
| SET_CONSOLE_3215; |
| #elif defined(CONFIG_TN3270_CONSOLE) |
| SET_CONSOLE_3270; |
| #endif |
| } else { |
| #if defined(CONFIG_SCLP_CONSOLE) |
| SET_CONSOLE_SCLP; |
| #endif |
| } |
| } |
| |
| #ifdef CONFIG_SMP |
| extern void machine_restart_smp(char *); |
| extern void machine_halt_smp(void); |
| extern void machine_power_off_smp(void); |
| |
| void (*_machine_restart)(char *command) = machine_restart_smp; |
| void (*_machine_halt)(void) = machine_halt_smp; |
| void (*_machine_power_off)(void) = machine_power_off_smp; |
| #else |
| /* |
| * Reboot, halt and power_off routines for non SMP. |
| */ |
| extern void reipl(unsigned long devno); |
| extern void reipl_diag(void); |
| static void do_machine_restart_nonsmp(char * __unused) |
| { |
| reipl_diag(); |
| |
| if (MACHINE_IS_VM) |
| cpcmd ("IPL", NULL, 0); |
| else |
| reipl (0x10000 | S390_lowcore.ipl_device); |
| } |
| |
| static void do_machine_halt_nonsmp(void) |
| { |
| if (MACHINE_IS_VM && strlen(vmhalt_cmd) > 0) |
| cpcmd(vmhalt_cmd, NULL, 0); |
| signal_processor(smp_processor_id(), sigp_stop_and_store_status); |
| } |
| |
| static void do_machine_power_off_nonsmp(void) |
| { |
| if (MACHINE_IS_VM && strlen(vmpoff_cmd) > 0) |
| cpcmd(vmpoff_cmd, NULL, 0); |
| signal_processor(smp_processor_id(), sigp_stop_and_store_status); |
| } |
| |
| void (*_machine_restart)(char *command) = do_machine_restart_nonsmp; |
| void (*_machine_halt)(void) = do_machine_halt_nonsmp; |
| void (*_machine_power_off)(void) = do_machine_power_off_nonsmp; |
| #endif |
| |
| /* |
| * Reboot, halt and power_off stubs. They just call _machine_restart, |
| * _machine_halt or _machine_power_off. |
| */ |
| |
| void machine_restart(char *command) |
| { |
| console_unblank(); |
| _machine_restart(command); |
| } |
| |
| void machine_halt(void) |
| { |
| console_unblank(); |
| _machine_halt(); |
| } |
| |
| void machine_power_off(void) |
| { |
| console_unblank(); |
| _machine_power_off(); |
| } |
| |
| static void __init |
| add_memory_hole(unsigned long start, unsigned long end) |
| { |
| unsigned long dma_pfn = MAX_DMA_ADDRESS >> PAGE_SHIFT; |
| |
| if (end <= dma_pfn) |
| zholes_size[ZONE_DMA] += end - start + 1; |
| else if (start > dma_pfn) |
| zholes_size[ZONE_NORMAL] += end - start + 1; |
| else { |
| zholes_size[ZONE_DMA] += dma_pfn - start + 1; |
| zholes_size[ZONE_NORMAL] += end - dma_pfn; |
| } |
| } |
| |
| static void __init |
| parse_cmdline_early(char **cmdline_p) |
| { |
| char c = ' ', cn, *to = command_line, *from = COMMAND_LINE; |
| unsigned long delay = 0; |
| |
| /* Save unparsed command line copy for /proc/cmdline */ |
| memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); |
| saved_command_line[COMMAND_LINE_SIZE-1] = '\0'; |
| |
| for (;;) { |
| /* |
| * "mem=XXX[kKmM]" sets memsize |
| */ |
| if (c == ' ' && strncmp(from, "mem=", 4) == 0) { |
| memory_end = simple_strtoul(from+4, &from, 0); |
| if ( *from == 'K' || *from == 'k' ) { |
| memory_end = memory_end << 10; |
| from++; |
| } else if ( *from == 'M' || *from == 'm' ) { |
| memory_end = memory_end << 20; |
| from++; |
| } |
| } |
| /* |
| * "ipldelay=XXX[sm]" sets ipl delay in seconds or minutes |
| */ |
| if (c == ' ' && strncmp(from, "ipldelay=", 9) == 0) { |
| delay = simple_strtoul(from+9, &from, 0); |
| if (*from == 's' || *from == 'S') { |
| delay = delay*1000000; |
| from++; |
| } else if (*from == 'm' || *from == 'M') { |
| delay = delay*60*1000000; |
| from++; |
| } |
| /* now wait for the requested amount of time */ |
| udelay(delay); |
| } |
| cn = *(from++); |
| if (!cn) |
| break; |
| if (cn == '\n') |
| cn = ' '; /* replace newlines with space */ |
| if (cn == 0x0d) |
| cn = ' '; /* replace 0x0d with space */ |
| if (cn == ' ' && c == ' ') |
| continue; /* remove additional spaces */ |
| c = cn; |
| if (to - command_line >= COMMAND_LINE_SIZE) |
| break; |
| *(to++) = c; |
| } |
| if (c == ' ' && to > command_line) to--; |
| *to = '\0'; |
| *cmdline_p = command_line; |
| } |
| |
| static void __init |
| setup_lowcore(void) |
| { |
| struct _lowcore *lc; |
| int lc_pages; |
| |
| /* |
| * Setup lowcore for boot cpu |
| */ |
| lc_pages = sizeof(void *) == 8 ? 2 : 1; |
| lc = (struct _lowcore *) |
| __alloc_bootmem(lc_pages * PAGE_SIZE, lc_pages * PAGE_SIZE, 0); |
| memset(lc, 0, lc_pages * PAGE_SIZE); |
| lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY; |
| lc->restart_psw.addr = |
| PSW_ADDR_AMODE | (unsigned long) restart_int_handler; |
| lc->external_new_psw.mask = PSW_KERNEL_BITS; |
| lc->external_new_psw.addr = |
| PSW_ADDR_AMODE | (unsigned long) ext_int_handler; |
| lc->svc_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_IO | PSW_MASK_EXT; |
| lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call; |
| lc->program_new_psw.mask = PSW_KERNEL_BITS; |
| lc->program_new_psw.addr = |
| PSW_ADDR_AMODE | (unsigned long)pgm_check_handler; |
| lc->mcck_new_psw.mask = |
| PSW_KERNEL_BITS & ~PSW_MASK_MCHECK & ~PSW_MASK_DAT; |
| lc->mcck_new_psw.addr = |
| PSW_ADDR_AMODE | (unsigned long) mcck_int_handler; |
| lc->io_new_psw.mask = PSW_KERNEL_BITS; |
| lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler; |
| lc->ipl_device = S390_lowcore.ipl_device; |
| lc->jiffy_timer = -1LL; |
| lc->kernel_stack = ((unsigned long) &init_thread_union) + THREAD_SIZE; |
| lc->async_stack = (unsigned long) |
| __alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0) + ASYNC_SIZE; |
| lc->panic_stack = (unsigned long) |
| __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE; |
| lc->current_task = (unsigned long) init_thread_union.thread_info.task; |
| lc->thread_info = (unsigned long) &init_thread_union; |
| #ifndef CONFIG_64BIT |
| if (MACHINE_HAS_IEEE) { |
| lc->extended_save_area_addr = (__u32) |
| __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0); |
| /* enable extended save area */ |
| ctl_set_bit(14, 29); |
| } |
| #endif |
| set_prefix((u32)(unsigned long) lc); |
| } |
| |
| static void __init |
| setup_resources(void) |
| { |
| struct resource *res; |
| int i; |
| |
| for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) { |
| res = alloc_bootmem_low(sizeof(struct resource)); |
| res->flags = IORESOURCE_BUSY | IORESOURCE_MEM; |
| switch (memory_chunk[i].type) { |
| case CHUNK_READ_WRITE: |
| res->name = "System RAM"; |
| break; |
| case CHUNK_READ_ONLY: |
| res->name = "System ROM"; |
| res->flags |= IORESOURCE_READONLY; |
| break; |
| default: |
| res->name = "reserved"; |
| } |
| res->start = memory_chunk[i].addr; |
| res->end = memory_chunk[i].addr + memory_chunk[i].size - 1; |
| request_resource(&iomem_resource, res); |
| request_resource(res, &code_resource); |
| request_resource(res, &data_resource); |
| } |
| } |
| |
| static void __init |
| setup_memory(void) |
| { |
| unsigned long bootmap_size; |
| unsigned long start_pfn, end_pfn, init_pfn; |
| unsigned long last_rw_end; |
| int i; |
| |
| /* |
| * partially used pages are not usable - thus |
| * we are rounding upwards: |
| */ |
| start_pfn = (__pa(&_end) + PAGE_SIZE - 1) >> PAGE_SHIFT; |
| end_pfn = max_pfn = memory_end >> PAGE_SHIFT; |
| |
| /* Initialize storage key for kernel pages */ |
| for (init_pfn = 0 ; init_pfn < start_pfn; init_pfn++) |
| page_set_storage_key(init_pfn << PAGE_SHIFT, PAGE_DEFAULT_KEY); |
| |
| /* |
| * Initialize the boot-time allocator (with low memory only): |
| */ |
| bootmap_size = init_bootmem(start_pfn, end_pfn); |
| |
| /* |
| * Register RAM areas with the bootmem allocator. |
| */ |
| last_rw_end = start_pfn; |
| |
| for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) { |
| unsigned long start_chunk, end_chunk; |
| |
| if (memory_chunk[i].type != CHUNK_READ_WRITE) |
| continue; |
| start_chunk = (memory_chunk[i].addr + PAGE_SIZE - 1); |
| start_chunk >>= PAGE_SHIFT; |
| end_chunk = (memory_chunk[i].addr + memory_chunk[i].size); |
| end_chunk >>= PAGE_SHIFT; |
| if (start_chunk < start_pfn) |
| start_chunk = start_pfn; |
| if (end_chunk > end_pfn) |
| end_chunk = end_pfn; |
| if (start_chunk < end_chunk) { |
| /* Initialize storage key for RAM pages */ |
| for (init_pfn = start_chunk ; init_pfn < end_chunk; |
| init_pfn++) |
| page_set_storage_key(init_pfn << PAGE_SHIFT, |
| PAGE_DEFAULT_KEY); |
| free_bootmem(start_chunk << PAGE_SHIFT, |
| (end_chunk - start_chunk) << PAGE_SHIFT); |
| if (last_rw_end < start_chunk) |
| add_memory_hole(last_rw_end, start_chunk - 1); |
| last_rw_end = end_chunk; |
| } |
| } |
| |
| psw_set_key(PAGE_DEFAULT_KEY); |
| |
| if (last_rw_end < end_pfn - 1) |
| add_memory_hole(last_rw_end, end_pfn - 1); |
| |
| /* |
| * Reserve the bootmem bitmap itself as well. We do this in two |
| * steps (first step was init_bootmem()) because this catches |
| * the (very unlikely) case of us accidentally initializing the |
| * bootmem allocator with an invalid RAM area. |
| */ |
| reserve_bootmem(start_pfn << PAGE_SHIFT, bootmap_size); |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| if (INITRD_START) { |
| if (INITRD_START + INITRD_SIZE <= memory_end) { |
| reserve_bootmem(INITRD_START, INITRD_SIZE); |
| initrd_start = INITRD_START; |
| initrd_end = initrd_start + INITRD_SIZE; |
| } else { |
| printk("initrd extends beyond end of memory " |
| "(0x%08lx > 0x%08lx)\ndisabling initrd\n", |
| initrd_start + INITRD_SIZE, memory_end); |
| initrd_start = initrd_end = 0; |
| } |
| } |
| #endif |
| } |
| |
| /* |
| * Setup function called from init/main.c just after the banner |
| * was printed. |
| */ |
| |
| void __init |
| setup_arch(char **cmdline_p) |
| { |
| /* |
| * print what head.S has found out about the machine |
| */ |
| #ifndef CONFIG_64BIT |
| printk((MACHINE_IS_VM) ? |
| "We are running under VM (31 bit mode)\n" : |
| "We are running native (31 bit mode)\n"); |
| printk((MACHINE_HAS_IEEE) ? |
| "This machine has an IEEE fpu\n" : |
| "This machine has no IEEE fpu\n"); |
| #else /* CONFIG_64BIT */ |
| printk((MACHINE_IS_VM) ? |
| "We are running under VM (64 bit mode)\n" : |
| "We are running native (64 bit mode)\n"); |
| #endif /* CONFIG_64BIT */ |
| |
| ROOT_DEV = Root_RAM0; |
| #ifndef CONFIG_64BIT |
| memory_end = memory_size & ~0x400000UL; /* align memory end to 4MB */ |
| /* |
| * We need some free virtual space to be able to do vmalloc. |
| * On a machine with 2GB memory we make sure that we have at |
| * least 128 MB free space for vmalloc. |
| */ |
| if (memory_end > 1920*1024*1024) |
| memory_end = 1920*1024*1024; |
| #else /* CONFIG_64BIT */ |
| memory_end = memory_size & ~0x200000UL; /* detected in head.s */ |
| #endif /* CONFIG_64BIT */ |
| |
| init_mm.start_code = PAGE_OFFSET; |
| init_mm.end_code = (unsigned long) &_etext; |
| init_mm.end_data = (unsigned long) &_edata; |
| init_mm.brk = (unsigned long) &_end; |
| |
| parse_cmdline_early(cmdline_p); |
| |
| setup_memory(); |
| setup_resources(); |
| setup_lowcore(); |
| |
| cpu_init(); |
| __cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr; |
| |
| /* |
| * Create kernel page tables and switch to virtual addressing. |
| */ |
| paging_init(); |
| |
| /* Setup default console */ |
| conmode_default(); |
| } |
| |
| void print_cpu_info(struct cpuinfo_S390 *cpuinfo) |
| { |
| printk("cpu %d " |
| #ifdef CONFIG_SMP |
| "phys_idx=%d " |
| #endif |
| "vers=%02X ident=%06X machine=%04X unused=%04X\n", |
| cpuinfo->cpu_nr, |
| #ifdef CONFIG_SMP |
| cpuinfo->cpu_addr, |
| #endif |
| cpuinfo->cpu_id.version, |
| cpuinfo->cpu_id.ident, |
| cpuinfo->cpu_id.machine, |
| cpuinfo->cpu_id.unused); |
| } |
| |
| /* |
| * show_cpuinfo - Get information on one CPU for use by procfs. |
| */ |
| |
| static int show_cpuinfo(struct seq_file *m, void *v) |
| { |
| struct cpuinfo_S390 *cpuinfo; |
| unsigned long n = (unsigned long) v - 1; |
| |
| preempt_disable(); |
| if (!n) { |
| seq_printf(m, "vendor_id : IBM/S390\n" |
| "# processors : %i\n" |
| "bogomips per cpu: %lu.%02lu\n", |
| num_online_cpus(), loops_per_jiffy/(500000/HZ), |
| (loops_per_jiffy/(5000/HZ))%100); |
| } |
| if (cpu_online(n)) { |
| #ifdef CONFIG_SMP |
| if (smp_processor_id() == n) |
| cpuinfo = &S390_lowcore.cpu_data; |
| else |
| cpuinfo = &lowcore_ptr[n]->cpu_data; |
| #else |
| cpuinfo = &S390_lowcore.cpu_data; |
| #endif |
| seq_printf(m, "processor %li: " |
| "version = %02X, " |
| "identification = %06X, " |
| "machine = %04X\n", |
| n, cpuinfo->cpu_id.version, |
| cpuinfo->cpu_id.ident, |
| cpuinfo->cpu_id.machine); |
| } |
| preempt_enable(); |
| return 0; |
| } |
| |
| static void *c_start(struct seq_file *m, loff_t *pos) |
| { |
| return *pos < NR_CPUS ? (void *)((unsigned long) *pos + 1) : NULL; |
| } |
| static void *c_next(struct seq_file *m, void *v, loff_t *pos) |
| { |
| ++*pos; |
| return c_start(m, pos); |
| } |
| static void c_stop(struct seq_file *m, void *v) |
| { |
| } |
| struct seq_operations cpuinfo_op = { |
| .start = c_start, |
| .next = c_next, |
| .stop = c_stop, |
| .show = show_cpuinfo, |
| }; |
| |
| #define DEFINE_IPL_ATTR(_name, _format, _value) \ |
| static ssize_t ipl_##_name##_show(struct subsystem *subsys, \ |
| char *page) \ |
| { \ |
| return sprintf(page, _format, _value); \ |
| } \ |
| static struct subsys_attribute ipl_##_name##_attr = \ |
| __ATTR(_name, S_IRUGO, ipl_##_name##_show, NULL); |
| |
| DEFINE_IPL_ATTR(wwpn, "0x%016llx\n", (unsigned long long) |
| IPL_PARMBLOCK_START->fcp.wwpn); |
| DEFINE_IPL_ATTR(lun, "0x%016llx\n", (unsigned long long) |
| IPL_PARMBLOCK_START->fcp.lun); |
| DEFINE_IPL_ATTR(bootprog, "%lld\n", (unsigned long long) |
| IPL_PARMBLOCK_START->fcp.bootprog); |
| DEFINE_IPL_ATTR(br_lba, "%lld\n", (unsigned long long) |
| IPL_PARMBLOCK_START->fcp.br_lba); |
| |
| enum ipl_type_type { |
| ipl_type_unknown, |
| ipl_type_ccw, |
| ipl_type_fcp, |
| }; |
| |
| static enum ipl_type_type |
| get_ipl_type(void) |
| { |
| struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START; |
| |
| if (!IPL_DEVNO_VALID) |
| return ipl_type_unknown; |
| if (!IPL_PARMBLOCK_VALID) |
| return ipl_type_ccw; |
| if (ipl->hdr.header.version > IPL_MAX_SUPPORTED_VERSION) |
| return ipl_type_unknown; |
| if (ipl->fcp.pbt != IPL_TYPE_FCP) |
| return ipl_type_unknown; |
| return ipl_type_fcp; |
| } |
| |
| static ssize_t |
| ipl_type_show(struct subsystem *subsys, char *page) |
| { |
| switch (get_ipl_type()) { |
| case ipl_type_ccw: |
| return sprintf(page, "ccw\n"); |
| case ipl_type_fcp: |
| return sprintf(page, "fcp\n"); |
| default: |
| return sprintf(page, "unknown\n"); |
| } |
| } |
| |
| static struct subsys_attribute ipl_type_attr = __ATTR_RO(ipl_type); |
| |
| static ssize_t |
| ipl_device_show(struct subsystem *subsys, char *page) |
| { |
| struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START; |
| |
| switch (get_ipl_type()) { |
| case ipl_type_ccw: |
| return sprintf(page, "0.0.%04x\n", ipl_devno); |
| case ipl_type_fcp: |
| return sprintf(page, "0.0.%04x\n", ipl->fcp.devno); |
| default: |
| return 0; |
| } |
| } |
| |
| static struct subsys_attribute ipl_device_attr = |
| __ATTR(device, S_IRUGO, ipl_device_show, NULL); |
| |
| static struct attribute *ipl_fcp_attrs[] = { |
| &ipl_type_attr.attr, |
| &ipl_device_attr.attr, |
| &ipl_wwpn_attr.attr, |
| &ipl_lun_attr.attr, |
| &ipl_bootprog_attr.attr, |
| &ipl_br_lba_attr.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group ipl_fcp_attr_group = { |
| .attrs = ipl_fcp_attrs, |
| }; |
| |
| static struct attribute *ipl_ccw_attrs[] = { |
| &ipl_type_attr.attr, |
| &ipl_device_attr.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group ipl_ccw_attr_group = { |
| .attrs = ipl_ccw_attrs, |
| }; |
| |
| static struct attribute *ipl_unknown_attrs[] = { |
| &ipl_type_attr.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group ipl_unknown_attr_group = { |
| .attrs = ipl_unknown_attrs, |
| }; |
| |
| static ssize_t |
| ipl_parameter_read(struct kobject *kobj, char *buf, loff_t off, size_t count) |
| { |
| unsigned int size = IPL_PARMBLOCK_SIZE; |
| |
| if (off > size) |
| return 0; |
| if (off + count > size) |
| count = size - off; |
| |
| memcpy(buf, (void *) IPL_PARMBLOCK_START + off, count); |
| return count; |
| } |
| |
| static struct bin_attribute ipl_parameter_attr = { |
| .attr = { |
| .name = "binary_parameter", |
| .mode = S_IRUGO, |
| .owner = THIS_MODULE, |
| }, |
| .size = PAGE_SIZE, |
| .read = &ipl_parameter_read, |
| }; |
| |
| static ssize_t |
| ipl_scp_data_read(struct kobject *kobj, char *buf, loff_t off, size_t count) |
| { |
| unsigned int size = IPL_PARMBLOCK_START->fcp.scp_data_len; |
| void *scp_data = &IPL_PARMBLOCK_START->fcp.scp_data; |
| |
| if (off > size) |
| return 0; |
| if (off + count > size) |
| count = size - off; |
| |
| memcpy(buf, scp_data + off, count); |
| return count; |
| } |
| |
| static struct bin_attribute ipl_scp_data_attr = { |
| .attr = { |
| .name = "scp_data", |
| .mode = S_IRUGO, |
| .owner = THIS_MODULE, |
| }, |
| .size = PAGE_SIZE, |
| .read = &ipl_scp_data_read, |
| }; |
| |
| static decl_subsys(ipl, NULL, NULL); |
| |
| static int __init |
| ipl_device_sysfs_register(void) { |
| int rc; |
| |
| rc = firmware_register(&ipl_subsys); |
| if (rc) |
| return rc; |
| |
| switch (get_ipl_type()) { |
| case ipl_type_ccw: |
| sysfs_create_group(&ipl_subsys.kset.kobj, &ipl_ccw_attr_group); |
| break; |
| case ipl_type_fcp: |
| sysfs_create_group(&ipl_subsys.kset.kobj, &ipl_fcp_attr_group); |
| sysfs_create_bin_file(&ipl_subsys.kset.kobj, |
| &ipl_parameter_attr); |
| sysfs_create_bin_file(&ipl_subsys.kset.kobj, |
| &ipl_scp_data_attr); |
| break; |
| default: |
| sysfs_create_group(&ipl_subsys.kset.kobj, |
| &ipl_unknown_attr_group); |
| break; |
| } |
| return 0; |
| } |
| |
| __initcall(ipl_device_sysfs_register); |