| |
| /* |
| rbd.c -- Export ceph rados objects as a Linux block device |
| |
| |
| based on drivers/block/osdblk.c: |
| |
| Copyright 2009 Red Hat, Inc. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; see the file COPYING. If not, write to |
| the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| |
| |
| For usage instructions, please refer to: |
| |
| Documentation/ABI/testing/sysfs-bus-rbd |
| |
| */ |
| |
| #include <linux/ceph/libceph.h> |
| #include <linux/ceph/osd_client.h> |
| #include <linux/ceph/mon_client.h> |
| #include <linux/ceph/decode.h> |
| #include <linux/parser.h> |
| #include <linux/bsearch.h> |
| |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/fs.h> |
| #include <linux/blkdev.h> |
| #include <linux/slab.h> |
| |
| #include "rbd_types.h" |
| |
| #define RBD_DEBUG /* Activate rbd_assert() calls */ |
| |
| /* |
| * The basic unit of block I/O is a sector. It is interpreted in a |
| * number of contexts in Linux (blk, bio, genhd), but the default is |
| * universally 512 bytes. These symbols are just slightly more |
| * meaningful than the bare numbers they represent. |
| */ |
| #define SECTOR_SHIFT 9 |
| #define SECTOR_SIZE (1ULL << SECTOR_SHIFT) |
| |
| #define RBD_DRV_NAME "rbd" |
| #define RBD_DRV_NAME_LONG "rbd (rados block device)" |
| |
| #define RBD_MINORS_PER_MAJOR 256 /* max minors per blkdev */ |
| |
| #define RBD_SNAP_DEV_NAME_PREFIX "snap_" |
| #define RBD_MAX_SNAP_NAME_LEN \ |
| (NAME_MAX - (sizeof (RBD_SNAP_DEV_NAME_PREFIX) - 1)) |
| |
| #define RBD_MAX_SNAP_COUNT 510 /* allows max snapc to fit in 4KB */ |
| |
| #define RBD_SNAP_HEAD_NAME "-" |
| |
| #define BAD_SNAP_INDEX U32_MAX /* invalid index into snap array */ |
| |
| /* This allows a single page to hold an image name sent by OSD */ |
| #define RBD_IMAGE_NAME_LEN_MAX (PAGE_SIZE - sizeof (__le32) - 1) |
| #define RBD_IMAGE_ID_LEN_MAX 64 |
| |
| #define RBD_OBJ_PREFIX_LEN_MAX 64 |
| |
| /* Feature bits */ |
| |
| #define RBD_FEATURE_LAYERING (1<<0) |
| #define RBD_FEATURE_STRIPINGV2 (1<<1) |
| #define RBD_FEATURES_ALL \ |
| (RBD_FEATURE_LAYERING | RBD_FEATURE_STRIPINGV2) |
| |
| /* Features supported by this (client software) implementation. */ |
| |
| #define RBD_FEATURES_SUPPORTED (RBD_FEATURES_ALL) |
| |
| /* |
| * An RBD device name will be "rbd#", where the "rbd" comes from |
| * RBD_DRV_NAME above, and # is a unique integer identifier. |
| * MAX_INT_FORMAT_WIDTH is used in ensuring DEV_NAME_LEN is big |
| * enough to hold all possible device names. |
| */ |
| #define DEV_NAME_LEN 32 |
| #define MAX_INT_FORMAT_WIDTH ((5 * sizeof (int)) / 2 + 1) |
| |
| /* |
| * block device image metadata (in-memory version) |
| */ |
| struct rbd_image_header { |
| /* These six fields never change for a given rbd image */ |
| char *object_prefix; |
| __u8 obj_order; |
| __u8 crypt_type; |
| __u8 comp_type; |
| u64 stripe_unit; |
| u64 stripe_count; |
| u64 features; /* Might be changeable someday? */ |
| |
| /* The remaining fields need to be updated occasionally */ |
| u64 image_size; |
| struct ceph_snap_context *snapc; |
| char *snap_names; /* format 1 only */ |
| u64 *snap_sizes; /* format 1 only */ |
| }; |
| |
| /* |
| * An rbd image specification. |
| * |
| * The tuple (pool_id, image_id, snap_id) is sufficient to uniquely |
| * identify an image. Each rbd_dev structure includes a pointer to |
| * an rbd_spec structure that encapsulates this identity. |
| * |
| * Each of the id's in an rbd_spec has an associated name. For a |
| * user-mapped image, the names are supplied and the id's associated |
| * with them are looked up. For a layered image, a parent image is |
| * defined by the tuple, and the names are looked up. |
| * |
| * An rbd_dev structure contains a parent_spec pointer which is |
| * non-null if the image it represents is a child in a layered |
| * image. This pointer will refer to the rbd_spec structure used |
| * by the parent rbd_dev for its own identity (i.e., the structure |
| * is shared between the parent and child). |
| * |
| * Since these structures are populated once, during the discovery |
| * phase of image construction, they are effectively immutable so |
| * we make no effort to synchronize access to them. |
| * |
| * Note that code herein does not assume the image name is known (it |
| * could be a null pointer). |
| */ |
| struct rbd_spec { |
| u64 pool_id; |
| const char *pool_name; |
| |
| const char *image_id; |
| const char *image_name; |
| |
| u64 snap_id; |
| const char *snap_name; |
| |
| struct kref kref; |
| }; |
| |
| /* |
| * an instance of the client. multiple devices may share an rbd client. |
| */ |
| struct rbd_client { |
| struct ceph_client *client; |
| struct kref kref; |
| struct list_head node; |
| }; |
| |
| struct rbd_img_request; |
| typedef void (*rbd_img_callback_t)(struct rbd_img_request *); |
| |
| #define BAD_WHICH U32_MAX /* Good which or bad which, which? */ |
| |
| struct rbd_obj_request; |
| typedef void (*rbd_obj_callback_t)(struct rbd_obj_request *); |
| |
| enum obj_request_type { |
| OBJ_REQUEST_NODATA, OBJ_REQUEST_BIO, OBJ_REQUEST_PAGES |
| }; |
| |
| enum obj_req_flags { |
| OBJ_REQ_DONE, /* completion flag: not done = 0, done = 1 */ |
| OBJ_REQ_IMG_DATA, /* object usage: standalone = 0, image = 1 */ |
| OBJ_REQ_KNOWN, /* EXISTS flag valid: no = 0, yes = 1 */ |
| OBJ_REQ_EXISTS, /* target exists: no = 0, yes = 1 */ |
| }; |
| |
| struct rbd_obj_request { |
| const char *object_name; |
| u64 offset; /* object start byte */ |
| u64 length; /* bytes from offset */ |
| unsigned long flags; |
| |
| /* |
| * An object request associated with an image will have its |
| * img_data flag set; a standalone object request will not. |
| * |
| * A standalone object request will have which == BAD_WHICH |
| * and a null obj_request pointer. |
| * |
| * An object request initiated in support of a layered image |
| * object (to check for its existence before a write) will |
| * have which == BAD_WHICH and a non-null obj_request pointer. |
| * |
| * Finally, an object request for rbd image data will have |
| * which != BAD_WHICH, and will have a non-null img_request |
| * pointer. The value of which will be in the range |
| * 0..(img_request->obj_request_count-1). |
| */ |
| union { |
| struct rbd_obj_request *obj_request; /* STAT op */ |
| struct { |
| struct rbd_img_request *img_request; |
| u64 img_offset; |
| /* links for img_request->obj_requests list */ |
| struct list_head links; |
| }; |
| }; |
| u32 which; /* posn image request list */ |
| |
| enum obj_request_type type; |
| union { |
| struct bio *bio_list; |
| struct { |
| struct page **pages; |
| u32 page_count; |
| }; |
| }; |
| struct page **copyup_pages; |
| |
| struct ceph_osd_request *osd_req; |
| |
| u64 xferred; /* bytes transferred */ |
| int result; |
| |
| rbd_obj_callback_t callback; |
| struct completion completion; |
| |
| struct kref kref; |
| }; |
| |
| enum img_req_flags { |
| IMG_REQ_WRITE, /* I/O direction: read = 0, write = 1 */ |
| IMG_REQ_CHILD, /* initiator: block = 0, child image = 1 */ |
| IMG_REQ_LAYERED, /* ENOENT handling: normal = 0, layered = 1 */ |
| }; |
| |
| struct rbd_img_request { |
| struct rbd_device *rbd_dev; |
| u64 offset; /* starting image byte offset */ |
| u64 length; /* byte count from offset */ |
| unsigned long flags; |
| union { |
| u64 snap_id; /* for reads */ |
| struct ceph_snap_context *snapc; /* for writes */ |
| }; |
| union { |
| struct request *rq; /* block request */ |
| struct rbd_obj_request *obj_request; /* obj req initiator */ |
| }; |
| struct page **copyup_pages; |
| spinlock_t completion_lock;/* protects next_completion */ |
| u32 next_completion; |
| rbd_img_callback_t callback; |
| u64 xferred;/* aggregate bytes transferred */ |
| int result; /* first nonzero obj_request result */ |
| |
| u32 obj_request_count; |
| struct list_head obj_requests; /* rbd_obj_request structs */ |
| |
| struct kref kref; |
| }; |
| |
| #define for_each_obj_request(ireq, oreq) \ |
| list_for_each_entry(oreq, &(ireq)->obj_requests, links) |
| #define for_each_obj_request_from(ireq, oreq) \ |
| list_for_each_entry_from(oreq, &(ireq)->obj_requests, links) |
| #define for_each_obj_request_safe(ireq, oreq, n) \ |
| list_for_each_entry_safe_reverse(oreq, n, &(ireq)->obj_requests, links) |
| |
| struct rbd_mapping { |
| u64 size; |
| u64 features; |
| bool read_only; |
| }; |
| |
| /* |
| * a single device |
| */ |
| struct rbd_device { |
| int dev_id; /* blkdev unique id */ |
| |
| int major; /* blkdev assigned major */ |
| struct gendisk *disk; /* blkdev's gendisk and rq */ |
| |
| u32 image_format; /* Either 1 or 2 */ |
| struct rbd_client *rbd_client; |
| |
| char name[DEV_NAME_LEN]; /* blkdev name, e.g. rbd3 */ |
| |
| spinlock_t lock; /* queue, flags, open_count */ |
| |
| struct rbd_image_header header; |
| unsigned long flags; /* possibly lock protected */ |
| struct rbd_spec *spec; |
| |
| char *header_name; |
| |
| struct ceph_file_layout layout; |
| |
| struct ceph_osd_event *watch_event; |
| struct rbd_obj_request *watch_request; |
| |
| struct rbd_spec *parent_spec; |
| u64 parent_overlap; |
| struct rbd_device *parent; |
| |
| /* protects updating the header */ |
| struct rw_semaphore header_rwsem; |
| |
| struct rbd_mapping mapping; |
| |
| struct list_head node; |
| |
| /* sysfs related */ |
| struct device dev; |
| unsigned long open_count; /* protected by lock */ |
| }; |
| |
| /* |
| * Flag bits for rbd_dev->flags. If atomicity is required, |
| * rbd_dev->lock is used to protect access. |
| * |
| * Currently, only the "removing" flag (which is coupled with the |
| * "open_count" field) requires atomic access. |
| */ |
| enum rbd_dev_flags { |
| RBD_DEV_FLAG_EXISTS, /* mapped snapshot has not been deleted */ |
| RBD_DEV_FLAG_REMOVING, /* this mapping is being removed */ |
| }; |
| |
| static DEFINE_MUTEX(ctl_mutex); /* Serialize open/close/setup/teardown */ |
| |
| static LIST_HEAD(rbd_dev_list); /* devices */ |
| static DEFINE_SPINLOCK(rbd_dev_list_lock); |
| |
| static LIST_HEAD(rbd_client_list); /* clients */ |
| static DEFINE_SPINLOCK(rbd_client_list_lock); |
| |
| /* Slab caches for frequently-allocated structures */ |
| |
| static struct kmem_cache *rbd_img_request_cache; |
| static struct kmem_cache *rbd_obj_request_cache; |
| static struct kmem_cache *rbd_segment_name_cache; |
| |
| static int rbd_img_request_submit(struct rbd_img_request *img_request); |
| |
| static void rbd_dev_device_release(struct device *dev); |
| |
| static ssize_t rbd_add(struct bus_type *bus, const char *buf, |
| size_t count); |
| static ssize_t rbd_remove(struct bus_type *bus, const char *buf, |
| size_t count); |
| static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping); |
| |
| static struct bus_attribute rbd_bus_attrs[] = { |
| __ATTR(add, S_IWUSR, NULL, rbd_add), |
| __ATTR(remove, S_IWUSR, NULL, rbd_remove), |
| __ATTR_NULL |
| }; |
| |
| static struct bus_type rbd_bus_type = { |
| .name = "rbd", |
| .bus_attrs = rbd_bus_attrs, |
| }; |
| |
| static void rbd_root_dev_release(struct device *dev) |
| { |
| } |
| |
| static struct device rbd_root_dev = { |
| .init_name = "rbd", |
| .release = rbd_root_dev_release, |
| }; |
| |
| static __printf(2, 3) |
| void rbd_warn(struct rbd_device *rbd_dev, const char *fmt, ...) |
| { |
| struct va_format vaf; |
| va_list args; |
| |
| va_start(args, fmt); |
| vaf.fmt = fmt; |
| vaf.va = &args; |
| |
| if (!rbd_dev) |
| printk(KERN_WARNING "%s: %pV\n", RBD_DRV_NAME, &vaf); |
| else if (rbd_dev->disk) |
| printk(KERN_WARNING "%s: %s: %pV\n", |
| RBD_DRV_NAME, rbd_dev->disk->disk_name, &vaf); |
| else if (rbd_dev->spec && rbd_dev->spec->image_name) |
| printk(KERN_WARNING "%s: image %s: %pV\n", |
| RBD_DRV_NAME, rbd_dev->spec->image_name, &vaf); |
| else if (rbd_dev->spec && rbd_dev->spec->image_id) |
| printk(KERN_WARNING "%s: id %s: %pV\n", |
| RBD_DRV_NAME, rbd_dev->spec->image_id, &vaf); |
| else /* punt */ |
| printk(KERN_WARNING "%s: rbd_dev %p: %pV\n", |
| RBD_DRV_NAME, rbd_dev, &vaf); |
| va_end(args); |
| } |
| |
| #ifdef RBD_DEBUG |
| #define rbd_assert(expr) \ |
| if (unlikely(!(expr))) { \ |
| printk(KERN_ERR "\nAssertion failure in %s() " \ |
| "at line %d:\n\n" \ |
| "\trbd_assert(%s);\n\n", \ |
| __func__, __LINE__, #expr); \ |
| BUG(); \ |
| } |
| #else /* !RBD_DEBUG */ |
| # define rbd_assert(expr) ((void) 0) |
| #endif /* !RBD_DEBUG */ |
| |
| static int rbd_img_obj_request_submit(struct rbd_obj_request *obj_request); |
| static void rbd_img_parent_read(struct rbd_obj_request *obj_request); |
| static void rbd_dev_remove_parent(struct rbd_device *rbd_dev); |
| |
| static int rbd_dev_refresh(struct rbd_device *rbd_dev); |
| static int rbd_dev_v2_header_onetime(struct rbd_device *rbd_dev); |
| static int rbd_dev_v2_header_info(struct rbd_device *rbd_dev); |
| static const char *rbd_dev_v2_snap_name(struct rbd_device *rbd_dev, |
| u64 snap_id); |
| static int _rbd_dev_v2_snap_size(struct rbd_device *rbd_dev, u64 snap_id, |
| u8 *order, u64 *snap_size); |
| static int _rbd_dev_v2_snap_features(struct rbd_device *rbd_dev, u64 snap_id, |
| u64 *snap_features); |
| static u64 rbd_snap_id_by_name(struct rbd_device *rbd_dev, const char *name); |
| |
| static int rbd_open(struct block_device *bdev, fmode_t mode) |
| { |
| struct rbd_device *rbd_dev = bdev->bd_disk->private_data; |
| bool removing = false; |
| |
| if ((mode & FMODE_WRITE) && rbd_dev->mapping.read_only) |
| return -EROFS; |
| |
| spin_lock_irq(&rbd_dev->lock); |
| if (test_bit(RBD_DEV_FLAG_REMOVING, &rbd_dev->flags)) |
| removing = true; |
| else |
| rbd_dev->open_count++; |
| spin_unlock_irq(&rbd_dev->lock); |
| if (removing) |
| return -ENOENT; |
| |
| mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); |
| (void) get_device(&rbd_dev->dev); |
| set_device_ro(bdev, rbd_dev->mapping.read_only); |
| mutex_unlock(&ctl_mutex); |
| |
| return 0; |
| } |
| |
| static int rbd_release(struct gendisk *disk, fmode_t mode) |
| { |
| struct rbd_device *rbd_dev = disk->private_data; |
| unsigned long open_count_before; |
| |
| spin_lock_irq(&rbd_dev->lock); |
| open_count_before = rbd_dev->open_count--; |
| spin_unlock_irq(&rbd_dev->lock); |
| rbd_assert(open_count_before > 0); |
| |
| mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); |
| put_device(&rbd_dev->dev); |
| mutex_unlock(&ctl_mutex); |
| |
| return 0; |
| } |
| |
| static const struct block_device_operations rbd_bd_ops = { |
| .owner = THIS_MODULE, |
| .open = rbd_open, |
| .release = rbd_release, |
| }; |
| |
| /* |
| * Initialize an rbd client instance. |
| * We own *ceph_opts. |
| */ |
| static struct rbd_client *rbd_client_create(struct ceph_options *ceph_opts) |
| { |
| struct rbd_client *rbdc; |
| int ret = -ENOMEM; |
| |
| dout("%s:\n", __func__); |
| rbdc = kmalloc(sizeof(struct rbd_client), GFP_KERNEL); |
| if (!rbdc) |
| goto out_opt; |
| |
| kref_init(&rbdc->kref); |
| INIT_LIST_HEAD(&rbdc->node); |
| |
| mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); |
| |
| rbdc->client = ceph_create_client(ceph_opts, rbdc, 0, 0); |
| if (IS_ERR(rbdc->client)) |
| goto out_mutex; |
| ceph_opts = NULL; /* Now rbdc->client is responsible for ceph_opts */ |
| |
| ret = ceph_open_session(rbdc->client); |
| if (ret < 0) |
| goto out_err; |
| |
| spin_lock(&rbd_client_list_lock); |
| list_add_tail(&rbdc->node, &rbd_client_list); |
| spin_unlock(&rbd_client_list_lock); |
| |
| mutex_unlock(&ctl_mutex); |
| dout("%s: rbdc %p\n", __func__, rbdc); |
| |
| return rbdc; |
| |
| out_err: |
| ceph_destroy_client(rbdc->client); |
| out_mutex: |
| mutex_unlock(&ctl_mutex); |
| kfree(rbdc); |
| out_opt: |
| if (ceph_opts) |
| ceph_destroy_options(ceph_opts); |
| dout("%s: error %d\n", __func__, ret); |
| |
| return ERR_PTR(ret); |
| } |
| |
| static struct rbd_client *__rbd_get_client(struct rbd_client *rbdc) |
| { |
| kref_get(&rbdc->kref); |
| |
| return rbdc; |
| } |
| |
| /* |
| * Find a ceph client with specific addr and configuration. If |
| * found, bump its reference count. |
| */ |
| static struct rbd_client *rbd_client_find(struct ceph_options *ceph_opts) |
| { |
| struct rbd_client *client_node; |
| bool found = false; |
| |
| if (ceph_opts->flags & CEPH_OPT_NOSHARE) |
| return NULL; |
| |
| spin_lock(&rbd_client_list_lock); |
| list_for_each_entry(client_node, &rbd_client_list, node) { |
| if (!ceph_compare_options(ceph_opts, client_node->client)) { |
| __rbd_get_client(client_node); |
| |
| found = true; |
| break; |
| } |
| } |
| spin_unlock(&rbd_client_list_lock); |
| |
| return found ? client_node : NULL; |
| } |
| |
| /* |
| * mount options |
| */ |
| enum { |
| Opt_last_int, |
| /* int args above */ |
| Opt_last_string, |
| /* string args above */ |
| Opt_read_only, |
| Opt_read_write, |
| /* Boolean args above */ |
| Opt_last_bool, |
| }; |
| |
| static match_table_t rbd_opts_tokens = { |
| /* int args above */ |
| /* string args above */ |
| {Opt_read_only, "read_only"}, |
| {Opt_read_only, "ro"}, /* Alternate spelling */ |
| {Opt_read_write, "read_write"}, |
| {Opt_read_write, "rw"}, /* Alternate spelling */ |
| /* Boolean args above */ |
| {-1, NULL} |
| }; |
| |
| struct rbd_options { |
| bool read_only; |
| }; |
| |
| #define RBD_READ_ONLY_DEFAULT false |
| |
| static int parse_rbd_opts_token(char *c, void *private) |
| { |
| struct rbd_options *rbd_opts = private; |
| substring_t argstr[MAX_OPT_ARGS]; |
| int token, intval, ret; |
| |
| token = match_token(c, rbd_opts_tokens, argstr); |
| if (token < 0) |
| return -EINVAL; |
| |
| if (token < Opt_last_int) { |
| ret = match_int(&argstr[0], &intval); |
| if (ret < 0) { |
| pr_err("bad mount option arg (not int) " |
| "at '%s'\n", c); |
| return ret; |
| } |
| dout("got int token %d val %d\n", token, intval); |
| } else if (token > Opt_last_int && token < Opt_last_string) { |
| dout("got string token %d val %s\n", token, |
| argstr[0].from); |
| } else if (token > Opt_last_string && token < Opt_last_bool) { |
| dout("got Boolean token %d\n", token); |
| } else { |
| dout("got token %d\n", token); |
| } |
| |
| switch (token) { |
| case Opt_read_only: |
| rbd_opts->read_only = true; |
| break; |
| case Opt_read_write: |
| rbd_opts->read_only = false; |
| break; |
| default: |
| rbd_assert(false); |
| break; |
| } |
| return 0; |
| } |
| |
| /* |
| * Get a ceph client with specific addr and configuration, if one does |
| * not exist create it. |
| */ |
| static struct rbd_client *rbd_get_client(struct ceph_options *ceph_opts) |
| { |
| struct rbd_client *rbdc; |
| |
| rbdc = rbd_client_find(ceph_opts); |
| if (rbdc) /* using an existing client */ |
| ceph_destroy_options(ceph_opts); |
| else |
| rbdc = rbd_client_create(ceph_opts); |
| |
| return rbdc; |
| } |
| |
| /* |
| * Destroy ceph client |
| * |
| * Caller must hold rbd_client_list_lock. |
| */ |
| static void rbd_client_release(struct kref *kref) |
| { |
| struct rbd_client *rbdc = container_of(kref, struct rbd_client, kref); |
| |
| dout("%s: rbdc %p\n", __func__, rbdc); |
| spin_lock(&rbd_client_list_lock); |
| list_del(&rbdc->node); |
| spin_unlock(&rbd_client_list_lock); |
| |
| ceph_destroy_client(rbdc->client); |
| kfree(rbdc); |
| } |
| |
| /* |
| * Drop reference to ceph client node. If it's not referenced anymore, release |
| * it. |
| */ |
| static void rbd_put_client(struct rbd_client *rbdc) |
| { |
| if (rbdc) |
| kref_put(&rbdc->kref, rbd_client_release); |
| } |
| |
| static bool rbd_image_format_valid(u32 image_format) |
| { |
| return image_format == 1 || image_format == 2; |
| } |
| |
| static bool rbd_dev_ondisk_valid(struct rbd_image_header_ondisk *ondisk) |
| { |
| size_t size; |
| u32 snap_count; |
| |
| /* The header has to start with the magic rbd header text */ |
| if (memcmp(&ondisk->text, RBD_HEADER_TEXT, sizeof (RBD_HEADER_TEXT))) |
| return false; |
| |
| /* The bio layer requires at least sector-sized I/O */ |
| |
| if (ondisk->options.order < SECTOR_SHIFT) |
| return false; |
| |
| /* If we use u64 in a few spots we may be able to loosen this */ |
| |
| if (ondisk->options.order > 8 * sizeof (int) - 1) |
| return false; |
| |
| /* |
| * The size of a snapshot header has to fit in a size_t, and |
| * that limits the number of snapshots. |
| */ |
| snap_count = le32_to_cpu(ondisk->snap_count); |
| size = SIZE_MAX - sizeof (struct ceph_snap_context); |
| if (snap_count > size / sizeof (__le64)) |
| return false; |
| |
| /* |
| * Not only that, but the size of the entire the snapshot |
| * header must also be representable in a size_t. |
| */ |
| size -= snap_count * sizeof (__le64); |
| if ((u64) size < le64_to_cpu(ondisk->snap_names_len)) |
| return false; |
| |
| return true; |
| } |
| |
| /* |
| * Fill an rbd image header with information from the given format 1 |
| * on-disk header. |
| */ |
| static int rbd_header_from_disk(struct rbd_device *rbd_dev, |
| struct rbd_image_header_ondisk *ondisk) |
| { |
| struct rbd_image_header *header = &rbd_dev->header; |
| bool first_time = header->object_prefix == NULL; |
| struct ceph_snap_context *snapc; |
| char *object_prefix = NULL; |
| char *snap_names = NULL; |
| u64 *snap_sizes = NULL; |
| u32 snap_count; |
| size_t size; |
| int ret = -ENOMEM; |
| u32 i; |
| |
| /* Allocate this now to avoid having to handle failure below */ |
| |
| if (first_time) { |
| size_t len; |
| |
| len = strnlen(ondisk->object_prefix, |
| sizeof (ondisk->object_prefix)); |
| object_prefix = kmalloc(len + 1, GFP_KERNEL); |
| if (!object_prefix) |
| return -ENOMEM; |
| memcpy(object_prefix, ondisk->object_prefix, len); |
| object_prefix[len] = '\0'; |
| } |
| |
| /* Allocate the snapshot context and fill it in */ |
| |
| snap_count = le32_to_cpu(ondisk->snap_count); |
| snapc = ceph_create_snap_context(snap_count, GFP_KERNEL); |
| if (!snapc) |
| goto out_err; |
| snapc->seq = le64_to_cpu(ondisk->snap_seq); |
| if (snap_count) { |
| struct rbd_image_snap_ondisk *snaps; |
| u64 snap_names_len = le64_to_cpu(ondisk->snap_names_len); |
| |
| /* We'll keep a copy of the snapshot names... */ |
| |
| if (snap_names_len > (u64)SIZE_MAX) |
| goto out_2big; |
| snap_names = kmalloc(snap_names_len, GFP_KERNEL); |
| if (!snap_names) |
| goto out_err; |
| |
| /* ...as well as the array of their sizes. */ |
| |
| size = snap_count * sizeof (*header->snap_sizes); |
| snap_sizes = kmalloc(size, GFP_KERNEL); |
| if (!snap_sizes) |
| goto out_err; |
| |
| /* |
| * Copy the names, and fill in each snapshot's id |
| * and size. |
| * |
| * Note that rbd_dev_v1_header_info() guarantees the |
| * ondisk buffer we're working with has |
| * snap_names_len bytes beyond the end of the |
| * snapshot id array, this memcpy() is safe. |
| */ |
| memcpy(snap_names, &ondisk->snaps[snap_count], snap_names_len); |
| snaps = ondisk->snaps; |
| for (i = 0; i < snap_count; i++) { |
| snapc->snaps[i] = le64_to_cpu(snaps[i].id); |
| snap_sizes[i] = le64_to_cpu(snaps[i].image_size); |
| } |
| } |
| |
| /* We won't fail any more, fill in the header */ |
| |
| down_write(&rbd_dev->header_rwsem); |
| if (first_time) { |
| header->object_prefix = object_prefix; |
| header->obj_order = ondisk->options.order; |
| header->crypt_type = ondisk->options.crypt_type; |
| header->comp_type = ondisk->options.comp_type; |
| /* The rest aren't used for format 1 images */ |
| header->stripe_unit = 0; |
| header->stripe_count = 0; |
| header->features = 0; |
| } else { |
| ceph_put_snap_context(header->snapc); |
| kfree(header->snap_names); |
| kfree(header->snap_sizes); |
| } |
| |
| /* The remaining fields always get updated (when we refresh) */ |
| |
| header->image_size = le64_to_cpu(ondisk->image_size); |
| header->snapc = snapc; |
| header->snap_names = snap_names; |
| header->snap_sizes = snap_sizes; |
| |
| /* Make sure mapping size is consistent with header info */ |
| |
| if (rbd_dev->spec->snap_id == CEPH_NOSNAP || first_time) |
| if (rbd_dev->mapping.size != header->image_size) |
| rbd_dev->mapping.size = header->image_size; |
| |
| up_write(&rbd_dev->header_rwsem); |
| |
| return 0; |
| out_2big: |
| ret = -EIO; |
| out_err: |
| kfree(snap_sizes); |
| kfree(snap_names); |
| ceph_put_snap_context(snapc); |
| kfree(object_prefix); |
| |
| return ret; |
| } |
| |
| static const char *_rbd_dev_v1_snap_name(struct rbd_device *rbd_dev, u32 which) |
| { |
| const char *snap_name; |
| |
| rbd_assert(which < rbd_dev->header.snapc->num_snaps); |
| |
| /* Skip over names until we find the one we are looking for */ |
| |
| snap_name = rbd_dev->header.snap_names; |
| while (which--) |
| snap_name += strlen(snap_name) + 1; |
| |
| return kstrdup(snap_name, GFP_KERNEL); |
| } |
| |
| /* |
| * Snapshot id comparison function for use with qsort()/bsearch(). |
| * Note that result is for snapshots in *descending* order. |
| */ |
| static int snapid_compare_reverse(const void *s1, const void *s2) |
| { |
| u64 snap_id1 = *(u64 *)s1; |
| u64 snap_id2 = *(u64 *)s2; |
| |
| if (snap_id1 < snap_id2) |
| return 1; |
| return snap_id1 == snap_id2 ? 0 : -1; |
| } |
| |
| /* |
| * Search a snapshot context to see if the given snapshot id is |
| * present. |
| * |
| * Returns the position of the snapshot id in the array if it's found, |
| * or BAD_SNAP_INDEX otherwise. |
| * |
| * Note: The snapshot array is in kept sorted (by the osd) in |
| * reverse order, highest snapshot id first. |
| */ |
| static u32 rbd_dev_snap_index(struct rbd_device *rbd_dev, u64 snap_id) |
| { |
| struct ceph_snap_context *snapc = rbd_dev->header.snapc; |
| u64 *found; |
| |
| found = bsearch(&snap_id, &snapc->snaps, snapc->num_snaps, |
| sizeof (snap_id), snapid_compare_reverse); |
| |
| return found ? (u32)(found - &snapc->snaps[0]) : BAD_SNAP_INDEX; |
| } |
| |
| static const char *rbd_dev_v1_snap_name(struct rbd_device *rbd_dev, |
| u64 snap_id) |
| { |
| u32 which; |
| |
| which = rbd_dev_snap_index(rbd_dev, snap_id); |
| if (which == BAD_SNAP_INDEX) |
| return NULL; |
| |
| return _rbd_dev_v1_snap_name(rbd_dev, which); |
| } |
| |
| static const char *rbd_snap_name(struct rbd_device *rbd_dev, u64 snap_id) |
| { |
| if (snap_id == CEPH_NOSNAP) |
| return RBD_SNAP_HEAD_NAME; |
| |
| rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); |
| if (rbd_dev->image_format == 1) |
| return rbd_dev_v1_snap_name(rbd_dev, snap_id); |
| |
| return rbd_dev_v2_snap_name(rbd_dev, snap_id); |
| } |
| |
| static int rbd_snap_size(struct rbd_device *rbd_dev, u64 snap_id, |
| u64 *snap_size) |
| { |
| rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); |
| if (snap_id == CEPH_NOSNAP) { |
| *snap_size = rbd_dev->header.image_size; |
| } else if (rbd_dev->image_format == 1) { |
| u32 which; |
| |
| which = rbd_dev_snap_index(rbd_dev, snap_id); |
| if (which == BAD_SNAP_INDEX) |
| return -ENOENT; |
| |
| *snap_size = rbd_dev->header.snap_sizes[which]; |
| } else { |
| u64 size = 0; |
| int ret; |
| |
| ret = _rbd_dev_v2_snap_size(rbd_dev, snap_id, NULL, &size); |
| if (ret) |
| return ret; |
| |
| *snap_size = size; |
| } |
| return 0; |
| } |
| |
| static int rbd_snap_features(struct rbd_device *rbd_dev, u64 snap_id, |
| u64 *snap_features) |
| { |
| rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); |
| if (snap_id == CEPH_NOSNAP) { |
| *snap_features = rbd_dev->header.features; |
| } else if (rbd_dev->image_format == 1) { |
| *snap_features = 0; /* No features for format 1 */ |
| } else { |
| u64 features = 0; |
| int ret; |
| |
| ret = _rbd_dev_v2_snap_features(rbd_dev, snap_id, &features); |
| if (ret) |
| return ret; |
| |
| *snap_features = features; |
| } |
| return 0; |
| } |
| |
| static int rbd_dev_mapping_set(struct rbd_device *rbd_dev) |
| { |
| u64 snap_id = rbd_dev->spec->snap_id; |
| u64 size = 0; |
| u64 features = 0; |
| int ret; |
| |
| ret = rbd_snap_size(rbd_dev, snap_id, &size); |
| if (ret) |
| return ret; |
| ret = rbd_snap_features(rbd_dev, snap_id, &features); |
| if (ret) |
| return ret; |
| |
| rbd_dev->mapping.size = size; |
| rbd_dev->mapping.features = features; |
| |
| return 0; |
| } |
| |
| static void rbd_dev_mapping_clear(struct rbd_device *rbd_dev) |
| { |
| rbd_dev->mapping.size = 0; |
| rbd_dev->mapping.features = 0; |
| } |
| |
| static const char *rbd_segment_name(struct rbd_device *rbd_dev, u64 offset) |
| { |
| char *name; |
| u64 segment; |
| int ret; |
| |
| name = kmem_cache_alloc(rbd_segment_name_cache, GFP_NOIO); |
| if (!name) |
| return NULL; |
| segment = offset >> rbd_dev->header.obj_order; |
| ret = snprintf(name, MAX_OBJ_NAME_SIZE + 1, "%s.%012llx", |
| rbd_dev->header.object_prefix, segment); |
| if (ret < 0 || ret > MAX_OBJ_NAME_SIZE) { |
| pr_err("error formatting segment name for #%llu (%d)\n", |
| segment, ret); |
| kfree(name); |
| name = NULL; |
| } |
| |
| return name; |
| } |
| |
| static void rbd_segment_name_free(const char *name) |
| { |
| /* The explicit cast here is needed to drop the const qualifier */ |
| |
| kmem_cache_free(rbd_segment_name_cache, (void *)name); |
| } |
| |
| static u64 rbd_segment_offset(struct rbd_device *rbd_dev, u64 offset) |
| { |
| u64 segment_size = (u64) 1 << rbd_dev->header.obj_order; |
| |
| return offset & (segment_size - 1); |
| } |
| |
| static u64 rbd_segment_length(struct rbd_device *rbd_dev, |
| u64 offset, u64 length) |
| { |
| u64 segment_size = (u64) 1 << rbd_dev->header.obj_order; |
| |
| offset &= segment_size - 1; |
| |
| rbd_assert(length <= U64_MAX - offset); |
| if (offset + length > segment_size) |
| length = segment_size - offset; |
| |
| return length; |
| } |
| |
| /* |
| * returns the size of an object in the image |
| */ |
| static u64 rbd_obj_bytes(struct rbd_image_header *header) |
| { |
| return 1 << header->obj_order; |
| } |
| |
| /* |
| * bio helpers |
| */ |
| |
| static void bio_chain_put(struct bio *chain) |
| { |
| struct bio *tmp; |
| |
| while (chain) { |
| tmp = chain; |
| chain = chain->bi_next; |
| bio_put(tmp); |
| } |
| } |
| |
| /* |
| * zeros a bio chain, starting at specific offset |
| */ |
| static void zero_bio_chain(struct bio *chain, int start_ofs) |
| { |
| struct bio_vec *bv; |
| unsigned long flags; |
| void *buf; |
| int i; |
| int pos = 0; |
| |
| while (chain) { |
| bio_for_each_segment(bv, chain, i) { |
| if (pos + bv->bv_len > start_ofs) { |
| int remainder = max(start_ofs - pos, 0); |
| buf = bvec_kmap_irq(bv, &flags); |
| memset(buf + remainder, 0, |
| bv->bv_len - remainder); |
| bvec_kunmap_irq(buf, &flags); |
| } |
| pos += bv->bv_len; |
| } |
| |
| chain = chain->bi_next; |
| } |
| } |
| |
| /* |
| * similar to zero_bio_chain(), zeros data defined by a page array, |
| * starting at the given byte offset from the start of the array and |
| * continuing up to the given end offset. The pages array is |
| * assumed to be big enough to hold all bytes up to the end. |
| */ |
| static void zero_pages(struct page **pages, u64 offset, u64 end) |
| { |
| struct page **page = &pages[offset >> PAGE_SHIFT]; |
| |
| rbd_assert(end > offset); |
| rbd_assert(end - offset <= (u64)SIZE_MAX); |
| while (offset < end) { |
| size_t page_offset; |
| size_t length; |
| unsigned long flags; |
| void *kaddr; |
| |
| page_offset = (size_t)(offset & ~PAGE_MASK); |
| length = min(PAGE_SIZE - page_offset, (size_t)(end - offset)); |
| local_irq_save(flags); |
| kaddr = kmap_atomic(*page); |
| memset(kaddr + page_offset, 0, length); |
| kunmap_atomic(kaddr); |
| local_irq_restore(flags); |
| |
| offset += length; |
| page++; |
| } |
| } |
| |
| /* |
| * Clone a portion of a bio, starting at the given byte offset |
| * and continuing for the number of bytes indicated. |
| */ |
| static struct bio *bio_clone_range(struct bio *bio_src, |
| unsigned int offset, |
| unsigned int len, |
| gfp_t gfpmask) |
| { |
| struct bio_vec *bv; |
| unsigned int resid; |
| unsigned short idx; |
| unsigned int voff; |
| unsigned short end_idx; |
| unsigned short vcnt; |
| struct bio *bio; |
| |
| /* Handle the easy case for the caller */ |
| |
| if (!offset && len == bio_src->bi_size) |
| return bio_clone(bio_src, gfpmask); |
| |
| if (WARN_ON_ONCE(!len)) |
| return NULL; |
| if (WARN_ON_ONCE(len > bio_src->bi_size)) |
| return NULL; |
| if (WARN_ON_ONCE(offset > bio_src->bi_size - len)) |
| return NULL; |
| |
| /* Find first affected segment... */ |
| |
| resid = offset; |
| __bio_for_each_segment(bv, bio_src, idx, 0) { |
| if (resid < bv->bv_len) |
| break; |
| resid -= bv->bv_len; |
| } |
| voff = resid; |
| |
| /* ...and the last affected segment */ |
| |
| resid += len; |
| __bio_for_each_segment(bv, bio_src, end_idx, idx) { |
| if (resid <= bv->bv_len) |
| break; |
| resid -= bv->bv_len; |
| } |
| vcnt = end_idx - idx + 1; |
| |
| /* Build the clone */ |
| |
| bio = bio_alloc(gfpmask, (unsigned int) vcnt); |
| if (!bio) |
| return NULL; /* ENOMEM */ |
| |
| bio->bi_bdev = bio_src->bi_bdev; |
| bio->bi_sector = bio_src->bi_sector + (offset >> SECTOR_SHIFT); |
| bio->bi_rw = bio_src->bi_rw; |
| bio->bi_flags |= 1 << BIO_CLONED; |
| |
| /* |
| * Copy over our part of the bio_vec, then update the first |
| * and last (or only) entries. |
| */ |
| memcpy(&bio->bi_io_vec[0], &bio_src->bi_io_vec[idx], |
| vcnt * sizeof (struct bio_vec)); |
| bio->bi_io_vec[0].bv_offset += voff; |
| if (vcnt > 1) { |
| bio->bi_io_vec[0].bv_len -= voff; |
| bio->bi_io_vec[vcnt - 1].bv_len = resid; |
| } else { |
| bio->bi_io_vec[0].bv_len = len; |
| } |
| |
| bio->bi_vcnt = vcnt; |
| bio->bi_size = len; |
| bio->bi_idx = 0; |
| |
| return bio; |
| } |
| |
| /* |
| * Clone a portion of a bio chain, starting at the given byte offset |
| * into the first bio in the source chain and continuing for the |
| * number of bytes indicated. The result is another bio chain of |
| * exactly the given length, or a null pointer on error. |
| * |
| * The bio_src and offset parameters are both in-out. On entry they |
| * refer to the first source bio and the offset into that bio where |
| * the start of data to be cloned is located. |
| * |
| * On return, bio_src is updated to refer to the bio in the source |
| * chain that contains first un-cloned byte, and *offset will |
| * contain the offset of that byte within that bio. |
| */ |
| static struct bio *bio_chain_clone_range(struct bio **bio_src, |
| unsigned int *offset, |
| unsigned int len, |
| gfp_t gfpmask) |
| { |
| struct bio *bi = *bio_src; |
| unsigned int off = *offset; |
| struct bio *chain = NULL; |
| struct bio **end; |
| |
| /* Build up a chain of clone bios up to the limit */ |
| |
| if (!bi || off >= bi->bi_size || !len) |
| return NULL; /* Nothing to clone */ |
| |
| end = &chain; |
| while (len) { |
| unsigned int bi_size; |
| struct bio *bio; |
| |
| if (!bi) { |
| rbd_warn(NULL, "bio_chain exhausted with %u left", len); |
| goto out_err; /* EINVAL; ran out of bio's */ |
| } |
| bi_size = min_t(unsigned int, bi->bi_size - off, len); |
| bio = bio_clone_range(bi, off, bi_size, gfpmask); |
| if (!bio) |
| goto out_err; /* ENOMEM */ |
| |
| *end = bio; |
| end = &bio->bi_next; |
| |
| off += bi_size; |
| if (off == bi->bi_size) { |
| bi = bi->bi_next; |
| off = 0; |
| } |
| len -= bi_size; |
| } |
| *bio_src = bi; |
| *offset = off; |
| |
| return chain; |
| out_err: |
| bio_chain_put(chain); |
| |
| return NULL; |
| } |
| |
| /* |
| * The default/initial value for all object request flags is 0. For |
| * each flag, once its value is set to 1 it is never reset to 0 |
| * again. |
| */ |
| static void obj_request_img_data_set(struct rbd_obj_request *obj_request) |
| { |
| if (test_and_set_bit(OBJ_REQ_IMG_DATA, &obj_request->flags)) { |
| struct rbd_device *rbd_dev; |
| |
| rbd_dev = obj_request->img_request->rbd_dev; |
| rbd_warn(rbd_dev, "obj_request %p already marked img_data\n", |
| obj_request); |
| } |
| } |
| |
| static bool obj_request_img_data_test(struct rbd_obj_request *obj_request) |
| { |
| smp_mb(); |
| return test_bit(OBJ_REQ_IMG_DATA, &obj_request->flags) != 0; |
| } |
| |
| static void obj_request_done_set(struct rbd_obj_request *obj_request) |
| { |
| if (test_and_set_bit(OBJ_REQ_DONE, &obj_request->flags)) { |
| struct rbd_device *rbd_dev = NULL; |
| |
| if (obj_request_img_data_test(obj_request)) |
| rbd_dev = obj_request->img_request->rbd_dev; |
| rbd_warn(rbd_dev, "obj_request %p already marked done\n", |
| obj_request); |
| } |
| } |
| |
| static bool obj_request_done_test(struct rbd_obj_request *obj_request) |
| { |
| smp_mb(); |
| return test_bit(OBJ_REQ_DONE, &obj_request->flags) != 0; |
| } |
| |
| /* |
| * This sets the KNOWN flag after (possibly) setting the EXISTS |
| * flag. The latter is set based on the "exists" value provided. |
| * |
| * Note that for our purposes once an object exists it never goes |
| * away again. It's possible that the response from two existence |
| * checks are separated by the creation of the target object, and |
| * the first ("doesn't exist") response arrives *after* the second |
| * ("does exist"). In that case we ignore the second one. |
| */ |
| static void obj_request_existence_set(struct rbd_obj_request *obj_request, |
| bool exists) |
| { |
| if (exists) |
| set_bit(OBJ_REQ_EXISTS, &obj_request->flags); |
| set_bit(OBJ_REQ_KNOWN, &obj_request->flags); |
| smp_mb(); |
| } |
| |
| static bool obj_request_known_test(struct rbd_obj_request *obj_request) |
| { |
| smp_mb(); |
| return test_bit(OBJ_REQ_KNOWN, &obj_request->flags) != 0; |
| } |
| |
| static bool obj_request_exists_test(struct rbd_obj_request *obj_request) |
| { |
| smp_mb(); |
| return test_bit(OBJ_REQ_EXISTS, &obj_request->flags) != 0; |
| } |
| |
| static void rbd_obj_request_get(struct rbd_obj_request *obj_request) |
| { |
| dout("%s: obj %p (was %d)\n", __func__, obj_request, |
| atomic_read(&obj_request->kref.refcount)); |
| kref_get(&obj_request->kref); |
| } |
| |
| static void rbd_obj_request_destroy(struct kref *kref); |
| static void rbd_obj_request_put(struct rbd_obj_request *obj_request) |
| { |
| rbd_assert(obj_request != NULL); |
| dout("%s: obj %p (was %d)\n", __func__, obj_request, |
| atomic_read(&obj_request->kref.refcount)); |
| kref_put(&obj_request->kref, rbd_obj_request_destroy); |
| } |
| |
| static void rbd_img_request_destroy(struct kref *kref); |
| static void rbd_img_request_put(struct rbd_img_request *img_request) |
| { |
| rbd_assert(img_request != NULL); |
| dout("%s: img %p (was %d)\n", __func__, img_request, |
| atomic_read(&img_request->kref.refcount)); |
| kref_put(&img_request->kref, rbd_img_request_destroy); |
| } |
| |
| static inline void rbd_img_obj_request_add(struct rbd_img_request *img_request, |
| struct rbd_obj_request *obj_request) |
| { |
| rbd_assert(obj_request->img_request == NULL); |
| |
| /* Image request now owns object's original reference */ |
| obj_request->img_request = img_request; |
| obj_request->which = img_request->obj_request_count; |
| rbd_assert(!obj_request_img_data_test(obj_request)); |
| obj_request_img_data_set(obj_request); |
| rbd_assert(obj_request->which != BAD_WHICH); |
| img_request->obj_request_count++; |
| list_add_tail(&obj_request->links, &img_request->obj_requests); |
| dout("%s: img %p obj %p w=%u\n", __func__, img_request, obj_request, |
| obj_request->which); |
| } |
| |
| static inline void rbd_img_obj_request_del(struct rbd_img_request *img_request, |
| struct rbd_obj_request *obj_request) |
| { |
| rbd_assert(obj_request->which != BAD_WHICH); |
| |
| dout("%s: img %p obj %p w=%u\n", __func__, img_request, obj_request, |
| obj_request->which); |
| list_del(&obj_request->links); |
| rbd_assert(img_request->obj_request_count > 0); |
| img_request->obj_request_count--; |
| rbd_assert(obj_request->which == img_request->obj_request_count); |
| obj_request->which = BAD_WHICH; |
| rbd_assert(obj_request_img_data_test(obj_request)); |
| rbd_assert(obj_request->img_request == img_request); |
| obj_request->img_request = NULL; |
| obj_request->callback = NULL; |
| rbd_obj_request_put(obj_request); |
| } |
| |
| static bool obj_request_type_valid(enum obj_request_type type) |
| { |
| switch (type) { |
| case OBJ_REQUEST_NODATA: |
| case OBJ_REQUEST_BIO: |
| case OBJ_REQUEST_PAGES: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static int rbd_obj_request_submit(struct ceph_osd_client *osdc, |
| struct rbd_obj_request *obj_request) |
| { |
| dout("%s: osdc %p obj %p\n", __func__, osdc, obj_request); |
| |
| return ceph_osdc_start_request(osdc, obj_request->osd_req, false); |
| } |
| |
| static void rbd_img_request_complete(struct rbd_img_request *img_request) |
| { |
| |
| dout("%s: img %p\n", __func__, img_request); |
| |
| /* |
| * If no error occurred, compute the aggregate transfer |
| * count for the image request. We could instead use |
| * atomic64_cmpxchg() to update it as each object request |
| * completes; not clear which way is better off hand. |
| */ |
| if (!img_request->result) { |
| struct rbd_obj_request *obj_request; |
| u64 xferred = 0; |
| |
| for_each_obj_request(img_request, obj_request) |
| xferred += obj_request->xferred; |
| img_request->xferred = xferred; |
| } |
| |
| if (img_request->callback) |
| img_request->callback(img_request); |
| else |
| rbd_img_request_put(img_request); |
| } |
| |
| /* Caller is responsible for rbd_obj_request_destroy(obj_request) */ |
| |
| static int rbd_obj_request_wait(struct rbd_obj_request *obj_request) |
| { |
| dout("%s: obj %p\n", __func__, obj_request); |
| |
| return wait_for_completion_interruptible(&obj_request->completion); |
| } |
| |
| /* |
| * The default/initial value for all image request flags is 0. Each |
| * is conditionally set to 1 at image request initialization time |
| * and currently never change thereafter. |
| */ |
| static void img_request_write_set(struct rbd_img_request *img_request) |
| { |
| set_bit(IMG_REQ_WRITE, &img_request->flags); |
| smp_mb(); |
| } |
| |
| static bool img_request_write_test(struct rbd_img_request *img_request) |
| { |
| smp_mb(); |
| return test_bit(IMG_REQ_WRITE, &img_request->flags) != 0; |
| } |
| |
| static void img_request_child_set(struct rbd_img_request *img_request) |
| { |
| set_bit(IMG_REQ_CHILD, &img_request->flags); |
| smp_mb(); |
| } |
| |
| static bool img_request_child_test(struct rbd_img_request *img_request) |
| { |
| smp_mb(); |
| return test_bit(IMG_REQ_CHILD, &img_request->flags) != 0; |
| } |
| |
| static void img_request_layered_set(struct rbd_img_request *img_request) |
| { |
| set_bit(IMG_REQ_LAYERED, &img_request->flags); |
| smp_mb(); |
| } |
| |
| static bool img_request_layered_test(struct rbd_img_request *img_request) |
| { |
| smp_mb(); |
| return test_bit(IMG_REQ_LAYERED, &img_request->flags) != 0; |
| } |
| |
| static void |
| rbd_img_obj_request_read_callback(struct rbd_obj_request *obj_request) |
| { |
| u64 xferred = obj_request->xferred; |
| u64 length = obj_request->length; |
| |
| dout("%s: obj %p img %p result %d %llu/%llu\n", __func__, |
| obj_request, obj_request->img_request, obj_request->result, |
| xferred, length); |
| /* |
| * ENOENT means a hole in the image. We zero-fill the |
| * entire length of the request. A short read also implies |
| * zero-fill to the end of the request. Either way we |
| * update the xferred count to indicate the whole request |
| * was satisfied. |
| */ |
| rbd_assert(obj_request->type != OBJ_REQUEST_NODATA); |
| if (obj_request->result == -ENOENT) { |
| if (obj_request->type == OBJ_REQUEST_BIO) |
| zero_bio_chain(obj_request->bio_list, 0); |
| else |
| zero_pages(obj_request->pages, 0, length); |
| obj_request->result = 0; |
| obj_request->xferred = length; |
| } else if (xferred < length && !obj_request->result) { |
| if (obj_request->type == OBJ_REQUEST_BIO) |
| zero_bio_chain(obj_request->bio_list, xferred); |
| else |
| zero_pages(obj_request->pages, xferred, length); |
| obj_request->xferred = length; |
| } |
| obj_request_done_set(obj_request); |
| } |
| |
| static void rbd_obj_request_complete(struct rbd_obj_request *obj_request) |
| { |
| dout("%s: obj %p cb %p\n", __func__, obj_request, |
| obj_request->callback); |
| if (obj_request->callback) |
| obj_request->callback(obj_request); |
| else |
| complete_all(&obj_request->completion); |
| } |
| |
| static void rbd_osd_trivial_callback(struct rbd_obj_request *obj_request) |
| { |
| dout("%s: obj %p\n", __func__, obj_request); |
| obj_request_done_set(obj_request); |
| } |
| |
| static void rbd_osd_read_callback(struct rbd_obj_request *obj_request) |
| { |
| struct rbd_img_request *img_request = NULL; |
| struct rbd_device *rbd_dev = NULL; |
| bool layered = false; |
| |
| if (obj_request_img_data_test(obj_request)) { |
| img_request = obj_request->img_request; |
| layered = img_request && img_request_layered_test(img_request); |
| rbd_dev = img_request->rbd_dev; |
| } |
| |
| dout("%s: obj %p img %p result %d %llu/%llu\n", __func__, |
| obj_request, img_request, obj_request->result, |
| obj_request->xferred, obj_request->length); |
| if (layered && obj_request->result == -ENOENT && |
| obj_request->img_offset < rbd_dev->parent_overlap) |
| rbd_img_parent_read(obj_request); |
| else if (img_request) |
| rbd_img_obj_request_read_callback(obj_request); |
| else |
| obj_request_done_set(obj_request); |
| } |
| |
| static void rbd_osd_write_callback(struct rbd_obj_request *obj_request) |
| { |
| dout("%s: obj %p result %d %llu\n", __func__, obj_request, |
| obj_request->result, obj_request->length); |
| /* |
| * There is no such thing as a successful short write. Set |
| * it to our originally-requested length. |
| */ |
| obj_request->xferred = obj_request->length; |
| obj_request_done_set(obj_request); |
| } |
| |
| /* |
| * For a simple stat call there's nothing to do. We'll do more if |
| * this is part of a write sequence for a layered image. |
| */ |
| static void rbd_osd_stat_callback(struct rbd_obj_request *obj_request) |
| { |
| dout("%s: obj %p\n", __func__, obj_request); |
| obj_request_done_set(obj_request); |
| } |
| |
| static void rbd_osd_req_callback(struct ceph_osd_request *osd_req, |
| struct ceph_msg *msg) |
| { |
| struct rbd_obj_request *obj_request = osd_req->r_priv; |
| u16 opcode; |
| |
| dout("%s: osd_req %p msg %p\n", __func__, osd_req, msg); |
| rbd_assert(osd_req == obj_request->osd_req); |
| if (obj_request_img_data_test(obj_request)) { |
| rbd_assert(obj_request->img_request); |
| rbd_assert(obj_request->which != BAD_WHICH); |
| } else { |
| rbd_assert(obj_request->which == BAD_WHICH); |
| } |
| |
| if (osd_req->r_result < 0) |
| obj_request->result = osd_req->r_result; |
| |
| BUG_ON(osd_req->r_num_ops > 2); |
| |
| /* |
| * We support a 64-bit length, but ultimately it has to be |
| * passed to blk_end_request(), which takes an unsigned int. |
| */ |
| obj_request->xferred = osd_req->r_reply_op_len[0]; |
| rbd_assert(obj_request->xferred < (u64)UINT_MAX); |
| opcode = osd_req->r_ops[0].op; |
| switch (opcode) { |
| case CEPH_OSD_OP_READ: |
| rbd_osd_read_callback(obj_request); |
| break; |
| case CEPH_OSD_OP_WRITE: |
| rbd_osd_write_callback(obj_request); |
| break; |
| case CEPH_OSD_OP_STAT: |
| rbd_osd_stat_callback(obj_request); |
| break; |
| case CEPH_OSD_OP_CALL: |
| case CEPH_OSD_OP_NOTIFY_ACK: |
| case CEPH_OSD_OP_WATCH: |
| rbd_osd_trivial_callback(obj_request); |
| break; |
| default: |
| rbd_warn(NULL, "%s: unsupported op %hu\n", |
| obj_request->object_name, (unsigned short) opcode); |
| break; |
| } |
| |
| if (obj_request_done_test(obj_request)) |
| rbd_obj_request_complete(obj_request); |
| } |
| |
| static void rbd_osd_req_format_read(struct rbd_obj_request *obj_request) |
| { |
| struct rbd_img_request *img_request = obj_request->img_request; |
| struct ceph_osd_request *osd_req = obj_request->osd_req; |
| u64 snap_id; |
| |
| rbd_assert(osd_req != NULL); |
| |
| snap_id = img_request ? img_request->snap_id : CEPH_NOSNAP; |
| ceph_osdc_build_request(osd_req, obj_request->offset, |
| NULL, snap_id, NULL); |
| } |
| |
| static void rbd_osd_req_format_write(struct rbd_obj_request *obj_request) |
| { |
| struct rbd_img_request *img_request = obj_request->img_request; |
| struct ceph_osd_request *osd_req = obj_request->osd_req; |
| struct ceph_snap_context *snapc; |
| struct timespec mtime = CURRENT_TIME; |
| |
| rbd_assert(osd_req != NULL); |
| |
| snapc = img_request ? img_request->snapc : NULL; |
| ceph_osdc_build_request(osd_req, obj_request->offset, |
| snapc, CEPH_NOSNAP, &mtime); |
| } |
| |
| static struct ceph_osd_request *rbd_osd_req_create( |
| struct rbd_device *rbd_dev, |
| bool write_request, |
| struct rbd_obj_request *obj_request) |
| { |
| struct ceph_snap_context *snapc = NULL; |
| struct ceph_osd_client *osdc; |
| struct ceph_osd_request *osd_req; |
| |
| if (obj_request_img_data_test(obj_request)) { |
| struct rbd_img_request *img_request = obj_request->img_request; |
| |
| rbd_assert(write_request == |
| img_request_write_test(img_request)); |
| if (write_request) |
| snapc = img_request->snapc; |
| } |
| |
| /* Allocate and initialize the request, for the single op */ |
| |
| osdc = &rbd_dev->rbd_client->client->osdc; |
| osd_req = ceph_osdc_alloc_request(osdc, snapc, 1, false, GFP_ATOMIC); |
| if (!osd_req) |
| return NULL; /* ENOMEM */ |
| |
| if (write_request) |
| osd_req->r_flags = CEPH_OSD_FLAG_WRITE | CEPH_OSD_FLAG_ONDISK; |
| else |
| osd_req->r_flags = CEPH_OSD_FLAG_READ; |
| |
| osd_req->r_callback = rbd_osd_req_callback; |
| osd_req->r_priv = obj_request; |
| |
| osd_req->r_oid_len = strlen(obj_request->object_name); |
| rbd_assert(osd_req->r_oid_len < sizeof (osd_req->r_oid)); |
| memcpy(osd_req->r_oid, obj_request->object_name, osd_req->r_oid_len); |
| |
| osd_req->r_file_layout = rbd_dev->layout; /* struct */ |
| |
| return osd_req; |
| } |
| |
| /* |
| * Create a copyup osd request based on the information in the |
| * object request supplied. A copyup request has two osd ops, |
| * a copyup method call, and a "normal" write request. |
| */ |
| static struct ceph_osd_request * |
| rbd_osd_req_create_copyup(struct rbd_obj_request *obj_request) |
| { |
| struct rbd_img_request *img_request; |
| struct ceph_snap_context *snapc; |
| struct rbd_device *rbd_dev; |
| struct ceph_osd_client *osdc; |
| struct ceph_osd_request *osd_req; |
| |
| rbd_assert(obj_request_img_data_test(obj_request)); |
| img_request = obj_request->img_request; |
| rbd_assert(img_request); |
| rbd_assert(img_request_write_test(img_request)); |
| |
| /* Allocate and initialize the request, for the two ops */ |
| |
| snapc = img_request->snapc; |
| rbd_dev = img_request->rbd_dev; |
| osdc = &rbd_dev->rbd_client->client->osdc; |
| osd_req = ceph_osdc_alloc_request(osdc, snapc, 2, false, GFP_ATOMIC); |
| if (!osd_req) |
| return NULL; /* ENOMEM */ |
| |
| osd_req->r_flags = CEPH_OSD_FLAG_WRITE | CEPH_OSD_FLAG_ONDISK; |
| osd_req->r_callback = rbd_osd_req_callback; |
| osd_req->r_priv = obj_request; |
| |
| osd_req->r_oid_len = strlen(obj_request->object_name); |
| rbd_assert(osd_req->r_oid_len < sizeof (osd_req->r_oid)); |
| memcpy(osd_req->r_oid, obj_request->object_name, osd_req->r_oid_len); |
| |
| osd_req->r_file_layout = rbd_dev->layout; /* struct */ |
| |
| return osd_req; |
| } |
| |
| |
| static void rbd_osd_req_destroy(struct ceph_osd_request *osd_req) |
| { |
| ceph_osdc_put_request(osd_req); |
| } |
| |
| /* object_name is assumed to be a non-null pointer and NUL-terminated */ |
| |
| static struct rbd_obj_request *rbd_obj_request_create(const char *object_name, |
| u64 offset, u64 length, |
| enum obj_request_type type) |
| { |
| struct rbd_obj_request *obj_request; |
| size_t size; |
| char *name; |
| |
| rbd_assert(obj_request_type_valid(type)); |
| |
| size = strlen(object_name) + 1; |
| name = kmalloc(size, GFP_KERNEL); |
| if (!name) |
| return NULL; |
| |
| obj_request = kmem_cache_zalloc(rbd_obj_request_cache, GFP_KERNEL); |
| if (!obj_request) { |
| kfree(name); |
| return NULL; |
| } |
| |
| obj_request->object_name = memcpy(name, object_name, size); |
| obj_request->offset = offset; |
| obj_request->length = length; |
| obj_request->flags = 0; |
| obj_request->which = BAD_WHICH; |
| obj_request->type = type; |
| INIT_LIST_HEAD(&obj_request->links); |
| init_completion(&obj_request->completion); |
| kref_init(&obj_request->kref); |
| |
| dout("%s: \"%s\" %llu/%llu %d -> obj %p\n", __func__, object_name, |
| offset, length, (int)type, obj_request); |
| |
| return obj_request; |
| } |
| |
| static void rbd_obj_request_destroy(struct kref *kref) |
| { |
| struct rbd_obj_request *obj_request; |
| |
| obj_request = container_of(kref, struct rbd_obj_request, kref); |
| |
| dout("%s: obj %p\n", __func__, obj_request); |
| |
| rbd_assert(obj_request->img_request == NULL); |
| rbd_assert(obj_request->which == BAD_WHICH); |
| |
| if (obj_request->osd_req) |
| rbd_osd_req_destroy(obj_request->osd_req); |
| |
| rbd_assert(obj_request_type_valid(obj_request->type)); |
| switch (obj_request->type) { |
| case OBJ_REQUEST_NODATA: |
| break; /* Nothing to do */ |
| case OBJ_REQUEST_BIO: |
| if (obj_request->bio_list) |
| bio_chain_put(obj_request->bio_list); |
| break; |
| case OBJ_REQUEST_PAGES: |
| if (obj_request->pages) |
| ceph_release_page_vector(obj_request->pages, |
| obj_request->page_count); |
| break; |
| } |
| |
| kfree(obj_request->object_name); |
| obj_request->object_name = NULL; |
| kmem_cache_free(rbd_obj_request_cache, obj_request); |
| } |
| |
| /* |
| * Caller is responsible for filling in the list of object requests |
| * that comprises the image request, and the Linux request pointer |
| * (if there is one). |
| */ |
| static struct rbd_img_request *rbd_img_request_create( |
| struct rbd_device *rbd_dev, |
| u64 offset, u64 length, |
| bool write_request, |
| bool child_request) |
| { |
| struct rbd_img_request *img_request; |
| |
| img_request = kmem_cache_alloc(rbd_img_request_cache, GFP_ATOMIC); |
| if (!img_request) |
| return NULL; |
| |
| if (write_request) { |
| down_read(&rbd_dev->header_rwsem); |
| ceph_get_snap_context(rbd_dev->header.snapc); |
| up_read(&rbd_dev->header_rwsem); |
| } |
| |
| img_request->rq = NULL; |
| img_request->rbd_dev = rbd_dev; |
| img_request->offset = offset; |
| img_request->length = length; |
| img_request->flags = 0; |
| if (write_request) { |
| img_request_write_set(img_request); |
| img_request->snapc = rbd_dev->header.snapc; |
| } else { |
| img_request->snap_id = rbd_dev->spec->snap_id; |
| } |
| if (child_request) |
| img_request_child_set(img_request); |
| if (rbd_dev->parent_spec) |
| img_request_layered_set(img_request); |
| spin_lock_init(&img_request->completion_lock); |
| img_request->next_completion = 0; |
| img_request->callback = NULL; |
| img_request->result = 0; |
| img_request->obj_request_count = 0; |
| INIT_LIST_HEAD(&img_request->obj_requests); |
| kref_init(&img_request->kref); |
| |
| dout("%s: rbd_dev %p %s %llu/%llu -> img %p\n", __func__, rbd_dev, |
| write_request ? "write" : "read", offset, length, |
| img_request); |
| |
| return img_request; |
| } |
| |
| static void rbd_img_request_destroy(struct kref *kref) |
| { |
| struct rbd_img_request *img_request; |
| struct rbd_obj_request *obj_request; |
| struct rbd_obj_request *next_obj_request; |
| |
| img_request = container_of(kref, struct rbd_img_request, kref); |
| |
| dout("%s: img %p\n", __func__, img_request); |
| |
| for_each_obj_request_safe(img_request, obj_request, next_obj_request) |
| rbd_img_obj_request_del(img_request, obj_request); |
| rbd_assert(img_request->obj_request_count == 0); |
| |
| if (img_request_write_test(img_request)) |
| ceph_put_snap_context(img_request->snapc); |
| |
| if (img_request_child_test(img_request)) |
| rbd_obj_request_put(img_request->obj_request); |
| |
| kmem_cache_free(rbd_img_request_cache, img_request); |
| } |
| |
| static bool rbd_img_obj_end_request(struct rbd_obj_request *obj_request) |
| { |
| struct rbd_img_request *img_request; |
| unsigned int xferred; |
| int result; |
| bool more; |
| |
| rbd_assert(obj_request_img_data_test(obj_request)); |
| img_request = obj_request->img_request; |
| |
| rbd_assert(obj_request->xferred <= (u64)UINT_MAX); |
| xferred = (unsigned int)obj_request->xferred; |
| result = obj_request->result; |
| if (result) { |
| struct rbd_device *rbd_dev = img_request->rbd_dev; |
| |
| rbd_warn(rbd_dev, "%s %llx at %llx (%llx)\n", |
| img_request_write_test(img_request) ? "write" : "read", |
| obj_request->length, obj_request->img_offset, |
| obj_request->offset); |
| rbd_warn(rbd_dev, " result %d xferred %x\n", |
| result, xferred); |
| if (!img_request->result) |
| img_request->result = result; |
| } |
| |
| /* Image object requests don't own their page array */ |
| |
| if (obj_request->type == OBJ_REQUEST_PAGES) { |
| obj_request->pages = NULL; |
| obj_request->page_count = 0; |
| } |
| |
| if (img_request_child_test(img_request)) { |
| rbd_assert(img_request->obj_request != NULL); |
| more = obj_request->which < img_request->obj_request_count - 1; |
| } else { |
| rbd_assert(img_request->rq != NULL); |
| more = blk_end_request(img_request->rq, result, xferred); |
| } |
| |
| return more; |
| } |
| |
| static void rbd_img_obj_callback(struct rbd_obj_request *obj_request) |
| { |
| struct rbd_img_request *img_request; |
| u32 which = obj_request->which; |
| bool more = true; |
| |
| rbd_assert(obj_request_img_data_test(obj_request)); |
| img_request = obj_request->img_request; |
| |
| dout("%s: img %p obj %p\n", __func__, img_request, obj_request); |
| rbd_assert(img_request != NULL); |
| rbd_assert(img_request->obj_request_count > 0); |
| rbd_assert(which != BAD_WHICH); |
| rbd_assert(which < img_request->obj_request_count); |
| rbd_assert(which >= img_request->next_completion); |
| |
| spin_lock_irq(&img_request->completion_lock); |
| if (which != img_request->next_completion) |
| goto out; |
| |
| for_each_obj_request_from(img_request, obj_request) { |
| rbd_assert(more); |
| rbd_assert(which < img_request->obj_request_count); |
| |
| if (!obj_request_done_test(obj_request)) |
| break; |
| more = rbd_img_obj_end_request(obj_request); |
| which++; |
| } |
| |
| rbd_assert(more ^ (which == img_request->obj_request_count)); |
| img_request->next_completion = which; |
| out: |
| spin_unlock_irq(&img_request->completion_lock); |
| |
| if (!more) |
| rbd_img_request_complete(img_request); |
| } |
| |
| /* |
| * Split up an image request into one or more object requests, each |
| * to a different object. The "type" parameter indicates whether |
| * "data_desc" is the pointer to the head of a list of bio |
| * structures, or the base of a page array. In either case this |
| * function assumes data_desc describes memory sufficient to hold |
| * all data described by the image request. |
| */ |
| static int rbd_img_request_fill(struct rbd_img_request *img_request, |
| enum obj_request_type type, |
| void *data_desc) |
| { |
| struct rbd_device *rbd_dev = img_request->rbd_dev; |
| struct rbd_obj_request *obj_request = NULL; |
| struct rbd_obj_request *next_obj_request; |
| bool write_request = img_request_write_test(img_request); |
| struct bio *bio_list; |
| unsigned int bio_offset = 0; |
| struct page **pages; |
| u64 img_offset; |
| u64 resid; |
| u16 opcode; |
| |
| dout("%s: img %p type %d data_desc %p\n", __func__, img_request, |
| (int)type, data_desc); |
| |
| opcode = write_request ? CEPH_OSD_OP_WRITE : CEPH_OSD_OP_READ; |
| img_offset = img_request->offset; |
| resid = img_request->length; |
| rbd_assert(resid > 0); |
| |
| if (type == OBJ_REQUEST_BIO) { |
| bio_list = data_desc; |
| rbd_assert(img_offset == bio_list->bi_sector << SECTOR_SHIFT); |
| } else { |
| rbd_assert(type == OBJ_REQUEST_PAGES); |
| pages = data_desc; |
| } |
| |
| while (resid) { |
| struct ceph_osd_request *osd_req; |
| const char *object_name; |
| u64 offset; |
| u64 length; |
| |
| object_name = rbd_segment_name(rbd_dev, img_offset); |
| if (!object_name) |
| goto out_unwind; |
| offset = rbd_segment_offset(rbd_dev, img_offset); |
| length = rbd_segment_length(rbd_dev, img_offset, resid); |
| obj_request = rbd_obj_request_create(object_name, |
| offset, length, type); |
| /* object request has its own copy of the object name */ |
| rbd_segment_name_free(object_name); |
| if (!obj_request) |
| goto out_unwind; |
| |
| if (type == OBJ_REQUEST_BIO) { |
| unsigned int clone_size; |
| |
| rbd_assert(length <= (u64)UINT_MAX); |
| clone_size = (unsigned int)length; |
| obj_request->bio_list = |
| bio_chain_clone_range(&bio_list, |
| &bio_offset, |
| clone_size, |
| GFP_ATOMIC); |
| if (!obj_request->bio_list) |
| goto out_partial; |
| } else { |
| unsigned int page_count; |
| |
| obj_request->pages = pages; |
| page_count = (u32)calc_pages_for(offset, length); |
| obj_request->page_count = page_count; |
| if ((offset + length) & ~PAGE_MASK) |
| page_count--; /* more on last page */ |
| pages += page_count; |
| } |
| |
| osd_req = rbd_osd_req_create(rbd_dev, write_request, |
| obj_request); |
| if (!osd_req) |
| goto out_partial; |
| obj_request->osd_req = osd_req; |
| obj_request->callback = rbd_img_obj_callback; |
| |
| osd_req_op_extent_init(osd_req, 0, opcode, offset, length, |
| 0, 0); |
| if (type == OBJ_REQUEST_BIO) |
| osd_req_op_extent_osd_data_bio(osd_req, 0, |
| obj_request->bio_list, length); |
| else |
| osd_req_op_extent_osd_data_pages(osd_req, 0, |
| obj_request->pages, length, |
| offset & ~PAGE_MASK, false, false); |
| |
| if (write_request) |
| rbd_osd_req_format_write(obj_request); |
| else |
| rbd_osd_req_format_read(obj_request); |
| |
| obj_request->img_offset = img_offset; |
| rbd_img_obj_request_add(img_request, obj_request); |
| |
| img_offset += length; |
| resid -= length; |
| } |
| |
| return 0; |
| |
| out_partial: |
| rbd_obj_request_put(obj_request); |
| out_unwind: |
| for_each_obj_request_safe(img_request, obj_request, next_obj_request) |
| rbd_obj_request_put(obj_request); |
| |
| return -ENOMEM; |
| } |
| |
| static void |
| rbd_img_obj_copyup_callback(struct rbd_obj_request *obj_request) |
| { |
| struct rbd_img_request *img_request; |
| struct rbd_device *rbd_dev; |
| u64 length; |
| u32 page_count; |
| |
| rbd_assert(obj_request->type == OBJ_REQUEST_BIO); |
| rbd_assert(obj_request_img_data_test(obj_request)); |
| img_request = obj_request->img_request; |
| rbd_assert(img_request); |
| |
| rbd_dev = img_request->rbd_dev; |
| rbd_assert(rbd_dev); |
| length = (u64)1 << rbd_dev->header.obj_order; |
| page_count = (u32)calc_pages_for(0, length); |
| |
| rbd_assert(obj_request->copyup_pages); |
| ceph_release_page_vector(obj_request->copyup_pages, page_count); |
| obj_request->copyup_pages = NULL; |
| |
| /* |
| * We want the transfer count to reflect the size of the |
| * original write request. There is no such thing as a |
| * successful short write, so if the request was successful |
| * we can just set it to the originally-requested length. |
| */ |
| if (!obj_request->result) |
| obj_request->xferred = obj_request->length; |
| |
| /* Finish up with the normal image object callback */ |
| |
| rbd_img_obj_callback(obj_request); |
| } |
| |
| static void |
| rbd_img_obj_parent_read_full_callback(struct rbd_img_request *img_request) |
| { |
| struct rbd_obj_request *orig_request; |
| struct ceph_osd_request *osd_req; |
| struct ceph_osd_client *osdc; |
| struct rbd_device *rbd_dev; |
| struct page **pages; |
| int result; |
| u64 obj_size; |
| u64 xferred; |
| |
| rbd_assert(img_request_child_test(img_request)); |
| |
| /* First get what we need from the image request */ |
| |
| pages = img_request->copyup_pages; |
| rbd_assert(pages != NULL); |
| img_request->copyup_pages = NULL; |
| |
| orig_request = img_request->obj_request; |
| rbd_assert(orig_request != NULL); |
| rbd_assert(orig_request->type == OBJ_REQUEST_BIO); |
| result = img_request->result; |
| obj_size = img_request->length; |
| xferred = img_request->xferred; |
| rbd_img_request_put(img_request); |
| |
| rbd_assert(orig_request->img_request); |
| rbd_dev = orig_request->img_request->rbd_dev; |
| rbd_assert(rbd_dev); |
| rbd_assert(obj_size == (u64)1 << rbd_dev->header.obj_order); |
| |
| if (result) |
| goto out_err; |
| |
| /* Allocate the new copyup osd request for the original request */ |
| |
| result = -ENOMEM; |
| rbd_assert(!orig_request->osd_req); |
| osd_req = rbd_osd_req_create_copyup(orig_request); |
| if (!osd_req) |
| goto out_err; |
| orig_request->osd_req = osd_req; |
| orig_request->copyup_pages = pages; |
| |
| /* Initialize the copyup op */ |
| |
| osd_req_op_cls_init(osd_req, 0, CEPH_OSD_OP_CALL, "rbd", "copyup"); |
| osd_req_op_cls_request_data_pages(osd_req, 0, pages, obj_size, 0, |
| false, false); |
| |
| /* Then the original write request op */ |
| |
| osd_req_op_extent_init(osd_req, 1, CEPH_OSD_OP_WRITE, |
| orig_request->offset, |
| orig_request->length, 0, 0); |
| osd_req_op_extent_osd_data_bio(osd_req, 1, orig_request->bio_list, |
| orig_request->length); |
| |
| rbd_osd_req_format_write(orig_request); |
| |
| /* All set, send it off. */ |
| |
| orig_request->callback = rbd_img_obj_copyup_callback; |
| osdc = &rbd_dev->rbd_client->client->osdc; |
| result = rbd_obj_request_submit(osdc, orig_request); |
| if (!result) |
| return; |
| out_err: |
| /* Record the error code and complete the request */ |
| |
| orig_request->result = result; |
| orig_request->xferred = 0; |
| obj_request_done_set(orig_request); |
| rbd_obj_request_complete(orig_request); |
| } |
| |
| /* |
| * Read from the parent image the range of data that covers the |
| * entire target of the given object request. This is used for |
| * satisfying a layered image write request when the target of an |
| * object request from the image request does not exist. |
| * |
| * A page array big enough to hold the returned data is allocated |
| * and supplied to rbd_img_request_fill() as the "data descriptor." |
| * When the read completes, this page array will be transferred to |
| * the original object request for the copyup operation. |
| * |
| * If an error occurs, record it as the result of the original |
| * object request and mark it done so it gets completed. |
| */ |
| static int rbd_img_obj_parent_read_full(struct rbd_obj_request *obj_request) |
| { |
| struct rbd_img_request *img_request = NULL; |
| struct rbd_img_request *parent_request = NULL; |
| struct rbd_device *rbd_dev; |
| u64 img_offset; |
| u64 length; |
| struct page **pages = NULL; |
| u32 page_count; |
| int result; |
| |
| rbd_assert(obj_request_img_data_test(obj_request)); |
| rbd_assert(obj_request->type == OBJ_REQUEST_BIO); |
| |
| img_request = obj_request->img_request; |
| rbd_assert(img_request != NULL); |
| rbd_dev = img_request->rbd_dev; |
| rbd_assert(rbd_dev->parent != NULL); |
| |
| /* |
| * First things first. The original osd request is of no |
| * use to use any more, we'll need a new one that can hold |
| * the two ops in a copyup request. We'll get that later, |
| * but for now we can release the old one. |
| */ |
| rbd_osd_req_destroy(obj_request->osd_req); |
| obj_request->osd_req = NULL; |
| |
| /* |
| * Determine the byte range covered by the object in the |
| * child image to which the original request was to be sent. |
| */ |
| img_offset = obj_request->img_offset - obj_request->offset; |
| length = (u64)1 << rbd_dev->header.obj_order; |
| |
| /* |
| * There is no defined parent data beyond the parent |
| * overlap, so limit what we read at that boundary if |
| * necessary. |
| */ |
| if (img_offset + length > rbd_dev->parent_overlap) { |
| rbd_assert(img_offset < rbd_dev->parent_overlap); |
| length = rbd_dev->parent_overlap - img_offset; |
| } |
| |
| /* |
| * Allocate a page array big enough to receive the data read |
| * from the parent. |
| */ |
| page_count = (u32)calc_pages_for(0, length); |
| pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); |
| if (IS_ERR(pages)) { |
| result = PTR_ERR(pages); |
| pages = NULL; |
| goto out_err; |
| } |
| |
| result = -ENOMEM; |
| parent_request = rbd_img_request_create(rbd_dev->parent, |
| img_offset, length, |
| false, true); |
| if (!parent_request) |
| goto out_err; |
| rbd_obj_request_get(obj_request); |
| parent_request->obj_request = obj_request; |
| |
| result = rbd_img_request_fill(parent_request, OBJ_REQUEST_PAGES, pages); |
| if (result) |
| goto out_err; |
| parent_request->copyup_pages = pages; |
| |
| parent_request->callback = rbd_img_obj_parent_read_full_callback; |
| result = rbd_img_request_submit(parent_request); |
| if (!result) |
| return 0; |
| |
| parent_request->copyup_pages = NULL; |
| parent_request->obj_request = NULL; |
| rbd_obj_request_put(obj_request); |
| out_err: |
| if (pages) |
| ceph_release_page_vector(pages, page_count); |
| if (parent_request) |
| rbd_img_request_put(parent_request); |
| obj_request->result = result; |
| obj_request->xferred = 0; |
| obj_request_done_set(obj_request); |
| |
| return result; |
| } |
| |
| static void rbd_img_obj_exists_callback(struct rbd_obj_request *obj_request) |
| { |
| struct rbd_obj_request *orig_request; |
| int result; |
| |
| rbd_assert(!obj_request_img_data_test(obj_request)); |
| |
| /* |
| * All we need from the object request is the original |
| * request and the result of the STAT op. Grab those, then |
| * we're done with the request. |
| */ |
| orig_request = obj_request->obj_request; |
| obj_request->obj_request = NULL; |
| rbd_assert(orig_request); |
| rbd_assert(orig_request->img_request); |
| |
| result = obj_request->result; |
| obj_request->result = 0; |
| |
| dout("%s: obj %p for obj %p result %d %llu/%llu\n", __func__, |
| obj_request, orig_request, result, |
| obj_request->xferred, obj_request->length); |
| rbd_obj_request_put(obj_request); |
| |
| rbd_assert(orig_request); |
| rbd_assert(orig_request->img_request); |
| |
| /* |
| * Our only purpose here is to determine whether the object |
| * exists, and we don't want to treat the non-existence as |
| * an error. If something else comes back, transfer the |
| * error to the original request and complete it now. |
| */ |
| if (!result) { |
| obj_request_existence_set(orig_request, true); |
| } else if (result == -ENOENT) { |
| obj_request_existence_set(orig_request, false); |
| } else if (result) { |
| orig_request->result = result; |
| goto out; |
| } |
| |
| /* |
| * Resubmit the original request now that we have recorded |
| * whether the target object exists. |
| */ |
| orig_request->result = rbd_img_obj_request_submit(orig_request); |
| out: |
| if (orig_request->result) |
| rbd_obj_request_complete(orig_request); |
| rbd_obj_request_put(orig_request); |
| } |
| |
| static int rbd_img_obj_exists_submit(struct rbd_obj_request *obj_request) |
| { |
| struct rbd_obj_request *stat_request; |
| struct rbd_device *rbd_dev; |
| struct ceph_osd_client *osdc; |
| struct page **pages = NULL; |
| u32 page_count; |
| size_t size; |
| int ret; |
| |
| /* |
| * The response data for a STAT call consists of: |
| * le64 length; |
| * struct { |
| * le32 tv_sec; |
| * le32 tv_nsec; |
| * } mtime; |
| */ |
| size = sizeof (__le64) + sizeof (__le32) + sizeof (__le32); |
| page_count = (u32)calc_pages_for(0, size); |
| pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); |
| if (IS_ERR(pages)) |
| return PTR_ERR(pages); |
| |
| ret = -ENOMEM; |
| stat_request = rbd_obj_request_create(obj_request->object_name, 0, 0, |
| OBJ_REQUEST_PAGES); |
| if (!stat_request) |
| goto out; |
| |
| rbd_obj_request_get(obj_request); |
| stat_request->obj_request = obj_request; |
| stat_request->pages = pages; |
| stat_request->page_count = page_count; |
| |
| rbd_assert(obj_request->img_request); |
| rbd_dev = obj_request->img_request->rbd_dev; |
| stat_request->osd_req = rbd_osd_req_create(rbd_dev, false, |
| stat_request); |
| if (!stat_request->osd_req) |
| goto out; |
| stat_request->callback = rbd_img_obj_exists_callback; |
| |
| osd_req_op_init(stat_request->osd_req, 0, CEPH_OSD_OP_STAT); |
| osd_req_op_raw_data_in_pages(stat_request->osd_req, 0, pages, size, 0, |
| false, false); |
| rbd_osd_req_format_read(stat_request); |
| |
| osdc = &rbd_dev->rbd_client->client->osdc; |
| ret = rbd_obj_request_submit(osdc, stat_request); |
| out: |
| if (ret) |
| rbd_obj_request_put(obj_request); |
| |
| return ret; |
| } |
| |
| static int rbd_img_obj_request_submit(struct rbd_obj_request *obj_request) |
| { |
| struct rbd_img_request *img_request; |
| struct rbd_device *rbd_dev; |
| bool known; |
| |
| rbd_assert(obj_request_img_data_test(obj_request)); |
| |
| img_request = obj_request->img_request; |
| rbd_assert(img_request); |
| rbd_dev = img_request->rbd_dev; |
| |
| /* |
| * Only writes to layered images need special handling. |
| * Reads and non-layered writes are simple object requests. |
| * Layered writes that start beyond the end of the overlap |
| * with the parent have no parent data, so they too are |
| * simple object requests. Finally, if the target object is |
| * known to already exist, its parent data has already been |
| * copied, so a write to the object can also be handled as a |
| * simple object request. |
| */ |
| if (!img_request_write_test(img_request) || |
| !img_request_layered_test(img_request) || |
| rbd_dev->parent_overlap <= obj_request->img_offset || |
| ((known = obj_request_known_test(obj_request)) && |
| obj_request_exists_test(obj_request))) { |
| |
| struct rbd_device *rbd_dev; |
| struct ceph_osd_client *osdc; |
| |
| rbd_dev = obj_request->img_request->rbd_dev; |
| osdc = &rbd_dev->rbd_client->client->osdc; |
| |
| return rbd_obj_request_submit(osdc, obj_request); |
| } |
| |
| /* |
| * It's a layered write. The target object might exist but |
| * we may not know that yet. If we know it doesn't exist, |
| * start by reading the data for the full target object from |
| * the parent so we can use it for a copyup to the target. |
| */ |
| if (known) |
| return rbd_img_obj_parent_read_full(obj_request); |
| |
| /* We don't know whether the target exists. Go find out. */ |
| |
| return rbd_img_obj_exists_submit(obj_request); |
| } |
| |
| static int rbd_img_request_submit(struct rbd_img_request *img_request) |
| { |
| struct rbd_obj_request *obj_request; |
| struct rbd_obj_request *next_obj_request; |
| |
| dout("%s: img %p\n", __func__, img_request); |
| for_each_obj_request_safe(img_request, obj_request, next_obj_request) { |
| int ret; |
| |
| ret = rbd_img_obj_request_submit(obj_request); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void rbd_img_parent_read_callback(struct rbd_img_request *img_request) |
| { |
| struct rbd_obj_request *obj_request; |
| struct rbd_device *rbd_dev; |
| u64 obj_end; |
| |
| rbd_assert(img_request_child_test(img_request)); |
| |
| obj_request = img_request->obj_request; |
| rbd_assert(obj_request); |
| rbd_assert(obj_request->img_request); |
| |
| obj_request->result = img_request->result; |
| if (obj_request->result) |
| goto out; |
| |
| /* |
| * We need to zero anything beyond the parent overlap |
| * boundary. Since rbd_img_obj_request_read_callback() |
| * will zero anything beyond the end of a short read, an |
| * easy way to do this is to pretend the data from the |
| * parent came up short--ending at the overlap boundary. |
| */ |
| rbd_assert(obj_request->img_offset < U64_MAX - obj_request->length); |
| obj_end = obj_request->img_offset + obj_request->length; |
| rbd_dev = obj_request->img_request->rbd_dev; |
| if (obj_end > rbd_dev->parent_overlap) { |
| u64 xferred = 0; |
| |
| if (obj_request->img_offset < rbd_dev->parent_overlap) |
| xferred = rbd_dev->parent_overlap - |
| obj_request->img_offset; |
| |
| obj_request->xferred = min(img_request->xferred, xferred); |
| } else { |
| obj_request->xferred = img_request->xferred; |
| } |
| out: |
| rbd_img_request_put(img_request); |
| rbd_img_obj_request_read_callback(obj_request); |
| rbd_obj_request_complete(obj_request); |
| } |
| |
| static void rbd_img_parent_read(struct rbd_obj_request *obj_request) |
| { |
| struct rbd_device *rbd_dev; |
| struct rbd_img_request *img_request; |
| int result; |
| |
| rbd_assert(obj_request_img_data_test(obj_request)); |
| rbd_assert(obj_request->img_request != NULL); |
| rbd_assert(obj_request->result == (s32) -ENOENT); |
| rbd_assert(obj_request_type_valid(obj_request->type)); |
| |
| rbd_dev = obj_request->img_request->rbd_dev; |
| rbd_assert(rbd_dev->parent != NULL); |
| /* rbd_read_finish(obj_request, obj_request->length); */ |
| img_request = rbd_img_request_create(rbd_dev->parent, |
| obj_request->img_offset, |
| obj_request->length, |
| false, true); |
| result = -ENOMEM; |
| if (!img_request) |
| goto out_err; |
| |
| rbd_obj_request_get(obj_request); |
| img_request->obj_request = obj_request; |
| |
| if (obj_request->type == OBJ_REQUEST_BIO) |
| result = rbd_img_request_fill(img_request, OBJ_REQUEST_BIO, |
| obj_request->bio_list); |
| else |
| result = rbd_img_request_fill(img_request, OBJ_REQUEST_PAGES, |
| obj_request->pages); |
| if (result) |
| goto out_err; |
| |
| img_request->callback = rbd_img_parent_read_callback; |
| result = rbd_img_request_submit(img_request); |
| if (result) |
| goto out_err; |
| |
| return; |
| out_err: |
| if (img_request) |
| rbd_img_request_put(img_request); |
| obj_request->result = result; |
| obj_request->xferred = 0; |
| obj_request_done_set(obj_request); |
| } |
| |
| static int rbd_obj_notify_ack(struct rbd_device *rbd_dev, u64 notify_id) |
| { |
| struct rbd_obj_request *obj_request; |
| struct ceph_osd_client *osdc = &rbd_dev->rbd_client->client->osdc; |
| int ret; |
| |
| obj_request = rbd_obj_request_create(rbd_dev->header_name, 0, 0, |
| OBJ_REQUEST_NODATA); |
| if (!obj_request) |
| return -ENOMEM; |
| |
| ret = -ENOMEM; |
| obj_request->osd_req = rbd_osd_req_create(rbd_dev, false, obj_request); |
| if (!obj_request->osd_req) |
| goto out; |
| obj_request->callback = rbd_obj_request_put; |
| |
| osd_req_op_watch_init(obj_request->osd_req, 0, CEPH_OSD_OP_NOTIFY_ACK, |
| notify_id, 0, 0); |
| rbd_osd_req_format_read(obj_request); |
| |
| ret = rbd_obj_request_submit(osdc, obj_request); |
| out: |
| if (ret) |
| rbd_obj_request_put(obj_request); |
| |
| return ret; |
| } |
| |
| static void rbd_watch_cb(u64 ver, u64 notify_id, u8 opcode, void *data) |
| { |
| struct rbd_device *rbd_dev = (struct rbd_device *)data; |
| int ret; |
| |
| if (!rbd_dev) |
| return; |
| |
| dout("%s: \"%s\" notify_id %llu opcode %u\n", __func__, |
| rbd_dev->header_name, (unsigned long long)notify_id, |
| (unsigned int)opcode); |
| ret = rbd_dev_refresh(rbd_dev); |
| if (ret) |
| rbd_warn(rbd_dev, ": header refresh error (%d)\n", ret); |
| |
| rbd_obj_notify_ack(rbd_dev, notify_id); |
| } |
| |
| /* |
| * Request sync osd watch/unwatch. The value of "start" determines |
| * whether a watch request is being initiated or torn down. |
| */ |
| static int rbd_dev_header_watch_sync(struct rbd_device *rbd_dev, bool start) |
| { |
| struct ceph_osd_client *osdc = &rbd_dev->rbd_client->client->osdc; |
| struct rbd_obj_request *obj_request; |
| int ret; |
| |
| rbd_assert(start ^ !!rbd_dev->watch_event); |
| rbd_assert(start ^ !!rbd_dev->watch_request); |
| |
| if (start) { |
| ret = ceph_osdc_create_event(osdc, rbd_watch_cb, rbd_dev, |
| &rbd_dev->watch_event); |
| if (ret < 0) |
| return ret; |
| rbd_assert(rbd_dev->watch_event != NULL); |
| } |
| |
| ret = -ENOMEM; |
| obj_request = rbd_obj_request_create(rbd_dev->header_name, 0, 0, |
| OBJ_REQUEST_NODATA); |
| if (!obj_request) |
| goto out_cancel; |
| |
| obj_request->osd_req = rbd_osd_req_create(rbd_dev, true, obj_request); |
| if (!obj_request->osd_req) |
| goto out_cancel; |
| |
| if (start) |
| ceph_osdc_set_request_linger(osdc, obj_request->osd_req); |
| else |
| ceph_osdc_unregister_linger_request(osdc, |
| rbd_dev->watch_request->osd_req); |
| |
| osd_req_op_watch_init(obj_request->osd_req, 0, CEPH_OSD_OP_WATCH, |
| rbd_dev->watch_event->cookie, 0, start ? 1 : 0); |
| rbd_osd_req_format_write(obj_request); |
| |
| ret = rbd_obj_request_submit(osdc, obj_request); |
| if (ret) |
| goto out_cancel; |
| ret = rbd_obj_request_wait(obj_request); |
| if (ret) |
| goto out_cancel; |
| ret = obj_request->result; |
| if (ret) |
| goto out_cancel; |
| |
| /* |
| * A watch request is set to linger, so the underlying osd |
| * request won't go away until we unregister it. We retain |
| * a pointer to the object request during that time (in |
| * rbd_dev->watch_request), so we'll keep a reference to |
| * it. We'll drop that reference (below) after we've |
| * unregistered it. |
| */ |
| if (start) { |
| rbd_dev->watch_request = obj_request; |
| |
| return 0; |
| } |
| |
| /* We have successfully torn down the watch request */ |
| |
| rbd_obj_request_put(rbd_dev->watch_request); |
| rbd_dev->watch_request = NULL; |
| out_cancel: |
| /* Cancel the event if we're tearing down, or on error */ |
| ceph_osdc_cancel_event(rbd_dev->watch_event); |
| rbd_dev->watch_event = NULL; |
| if (obj_request) |
| rbd_obj_request_put(obj_request); |
| |
| return ret; |
| } |
| |
| /* |
| * Synchronous osd object method call. Returns the number of bytes |
| * returned in the outbound buffer, or a negative error code. |
| */ |
| static int rbd_obj_method_sync(struct rbd_device *rbd_dev, |
| const char *object_name, |
| const char *class_name, |
| const char *method_name, |
| const void *outbound, |
| size_t outbound_size, |
| void *inbound, |
| size_t inbound_size) |
| { |
| struct ceph_osd_client *osdc = &rbd_dev->rbd_client->client->osdc; |
| struct rbd_obj_request *obj_request; |
| struct page **pages; |
| u32 page_count; |
| int ret; |
| |
| /* |
| * Method calls are ultimately read operations. The result |
| * should placed into the inbound buffer provided. They |
| * also supply outbound data--parameters for the object |
| * method. Currently if this is present it will be a |
| * snapshot id. |
| */ |
| page_count = (u32)calc_pages_for(0, inbound_size); |
| pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); |
| if (IS_ERR(pages)) |
| return PTR_ERR(pages); |
| |
| ret = -ENOMEM; |
| obj_request = rbd_obj_request_create(object_name, 0, inbound_size, |
| OBJ_REQUEST_PAGES); |
| if (!obj_request) |
| goto out; |
| |
| obj_request->pages = pages; |
| obj_request->page_count = page_count; |
| |
| obj_request->osd_req = rbd_osd_req_create(rbd_dev, false, obj_request); |
| if (!obj_request->osd_req) |
| goto out; |
| |
| osd_req_op_cls_init(obj_request->osd_req, 0, CEPH_OSD_OP_CALL, |
| class_name, method_name); |
| if (outbound_size) { |
| struct ceph_pagelist *pagelist; |
| |
| pagelist = kmalloc(sizeof (*pagelist), GFP_NOFS); |
| if (!pagelist) |
| goto out; |
| |
| ceph_pagelist_init(pagelist); |
| ceph_pagelist_append(pagelist, outbound, outbound_size); |
| osd_req_op_cls_request_data_pagelist(obj_request->osd_req, 0, |
| pagelist); |
| } |
| osd_req_op_cls_response_data_pages(obj_request->osd_req, 0, |
| obj_request->pages, inbound_size, |
| 0, false, false); |
| rbd_osd_req_format_read(obj_request); |
| |
| ret = rbd_obj_request_submit(osdc, obj_request); |
| if (ret) |
| goto out; |
| ret = rbd_obj_request_wait(obj_request); |
| if (ret) |
| goto out; |
| |
| ret = obj_request->result; |
| if (ret < 0) |
| goto out; |
| |
| rbd_assert(obj_request->xferred < (u64)INT_MAX); |
| ret = (int)obj_request->xferred; |
| ceph_copy_from_page_vector(pages, inbound, 0, obj_request->xferred); |
| out: |
| if (obj_request) |
| rbd_obj_request_put(obj_request); |
| else |
| ceph_release_page_vector(pages, page_count); |
| |
| return ret; |
| } |
| |
| static void rbd_request_fn(struct request_queue *q) |
| __releases(q->queue_lock) __acquires(q->queue_lock) |
| { |
| struct rbd_device *rbd_dev = q->queuedata; |
| bool read_only = rbd_dev->mapping.read_only; |
| struct request *rq; |
| int result; |
| |
| while ((rq = blk_fetch_request(q))) { |
| bool write_request = rq_data_dir(rq) == WRITE; |
| struct rbd_img_request *img_request; |
| u64 offset; |
| u64 length; |
| |
| /* Ignore any non-FS requests that filter through. */ |
| |
| if (rq->cmd_type != REQ_TYPE_FS) { |
| dout("%s: non-fs request type %d\n", __func__, |
| (int) rq->cmd_type); |
| __blk_end_request_all(rq, 0); |
| continue; |
| } |
| |
| /* Ignore/skip any zero-length requests */ |
| |
| offset = (u64) blk_rq_pos(rq) << SECTOR_SHIFT; |
| length = (u64) blk_rq_bytes(rq); |
| |
| if (!length) { |
| dout("%s: zero-length request\n", __func__); |
| __blk_end_request_all(rq, 0); |
| continue; |
| } |
| |
| spin_unlock_irq(q->queue_lock); |
| |
| /* Disallow writes to a read-only device */ |
| |
| if (write_request) { |
| result = -EROFS; |
| if (read_only) |
| goto end_request; |
| rbd_assert(rbd_dev->spec->snap_id == CEPH_NOSNAP); |
| } |
| |
| /* |
| * Quit early if the mapped snapshot no longer |
| * exists. It's still possible the snapshot will |
| * have disappeared by the time our request arrives |
| * at the osd, but there's no sense in sending it if |
| * we already know. |
| */ |
| if (!test_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags)) { |
| dout("request for non-existent snapshot"); |
| rbd_assert(rbd_dev->spec->snap_id != CEPH_NOSNAP); |
| result = -ENXIO; |
| goto end_request; |
| } |
| |
| result = -EINVAL; |
| if (offset && length > U64_MAX - offset + 1) { |
| rbd_warn(rbd_dev, "bad request range (%llu~%llu)\n", |
| offset, length); |
| goto end_request; /* Shouldn't happen */ |
| } |
| |
| result = -EIO; |
| if (offset + length > rbd_dev->mapping.size) { |
| rbd_warn(rbd_dev, "beyond EOD (%llu~%llu > %llu)\n", |
| offset, length, rbd_dev->mapping.size); |
| goto end_request; |
| } |
| |
| result = -ENOMEM; |
| img_request = rbd_img_request_create(rbd_dev, offset, length, |
| write_request, false); |
| if (!img_request) |
| goto end_request; |
| |
| img_request->rq = rq; |
| |
| result = rbd_img_request_fill(img_request, OBJ_REQUEST_BIO, |
| rq->bio); |
| if (!result) |
| result = rbd_img_request_submit(img_request); |
| if (result) |
| rbd_img_request_put(img_request); |
| end_request: |
| spin_lock_irq(q->queue_lock); |
| if (result < 0) { |
| rbd_warn(rbd_dev, "%s %llx at %llx result %d\n", |
| write_request ? "write" : "read", |
| length, offset, result); |
| |
| __blk_end_request_all(rq, result); |
| } |
| } |
| } |
| |
| /* |
| * a queue callback. Makes sure that we don't create a bio that spans across |
| * multiple osd objects. One exception would be with a single page bios, |
| * which we handle later at bio_chain_clone_range() |
| */ |
| static int rbd_merge_bvec(struct request_queue *q, struct bvec_merge_data *bmd, |
| struct bio_vec *bvec) |
| { |
| struct rbd_device *rbd_dev = q->queuedata; |
| sector_t sector_offset; |
| sector_t sectors_per_obj; |
| sector_t obj_sector_offset; |
| int ret; |
| |
| /* |
| * Find how far into its rbd object the partition-relative |
| * bio start sector is to offset relative to the enclosing |
| * device. |
| */ |
| sector_offset = get_start_sect(bmd->bi_bdev) + bmd->bi_sector; |
| sectors_per_obj = 1 << (rbd_dev->header.obj_order - SECTOR_SHIFT); |
| obj_sector_offset = sector_offset & (sectors_per_obj - 1); |
| |
| /* |
| * Compute the number of bytes from that offset to the end |
| * of the object. Account for what's already used by the bio. |
| */ |
| ret = (int) (sectors_per_obj - obj_sector_offset) << SECTOR_SHIFT; |
| if (ret > bmd->bi_size) |
| ret -= bmd->bi_size; |
| else |
| ret = 0; |
| |
| /* |
| * Don't send back more than was asked for. And if the bio |
| * was empty, let the whole thing through because: "Note |
| * that a block device *must* allow a single page to be |
| * added to an empty bio." |
| */ |
| rbd_assert(bvec->bv_len <= PAGE_SIZE); |
| if (ret > (int) bvec->bv_len || !bmd->bi_size) |
| ret = (int) bvec->bv_len; |
| |
| return ret; |
| } |
| |
| static void rbd_free_disk(struct rbd_device *rbd_dev) |
| { |
| struct gendisk *disk = rbd_dev->disk; |
| |
| if (!disk) |
| return; |
| |
| rbd_dev->disk = NULL; |
| if (disk->flags & GENHD_FL_UP) { |
| del_gendisk(disk); |
| if (disk->queue) |
| blk_cleanup_queue(disk->queue); |
| } |
| put_disk(disk); |
| } |
| |
| static int rbd_obj_read_sync(struct rbd_device *rbd_dev, |
| const char *object_name, |
| u64 offset, u64 length, void *buf) |
| |
| { |
| struct ceph_osd_client *osdc = &rbd_dev->rbd_client->client->osdc; |
| struct rbd_obj_request *obj_request; |
| struct page **pages = NULL; |
| u32 page_count; |
| size_t size; |
| int ret; |
| |
| page_count = (u32) calc_pages_for(offset, length); |
| pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); |
| if (IS_ERR(pages)) |
| ret = PTR_ERR(pages); |
| |
| ret = -ENOMEM; |
| obj_request = rbd_obj_request_create(object_name, offset, length, |
| OBJ_REQUEST_PAGES); |
| if (!obj_request) |
| goto out; |
| |
| obj_request->pages = pages; |
| obj_request->page_count = page_count; |
| |
| obj_request->osd_req = rbd_osd_req_create(rbd_dev, false, obj_request); |
| if (!obj_request->osd_req) |
| goto out; |
| |
| osd_req_op_extent_init(obj_request->osd_req, 0, CEPH_OSD_OP_READ, |
| offset, length, 0, 0); |
| osd_req_op_extent_osd_data_pages(obj_request->osd_req, 0, |
| obj_request->pages, |
| obj_request->length, |
| obj_request->offset & ~PAGE_MASK, |
| false, false); |
| rbd_osd_req_format_read(obj_request); |
| |
| ret = rbd_obj_request_submit(osdc, obj_request); |
| if (ret) |
| goto out; |
| ret = rbd_obj_request_wait(obj_request); |
| if (ret) |
| goto out; |
| |
| ret = obj_request->result; |
| if (ret < 0) |
| goto out; |
| |
| rbd_assert(obj_request->xferred <= (u64) SIZE_MAX); |
| size = (size_t) obj_request->xferred; |
| ceph_copy_from_page_vector(pages, buf, 0, size); |
| rbd_assert(size <= (size_t)INT_MAX); |
| ret = (int)size; |
| out: |
| if (obj_request) |
| rbd_obj_request_put(obj_request); |
| else |
| ceph_release_page_vector(pages, page_count); |
| |
| return ret; |
| } |
| |
| /* |
| * Read the complete header for the given rbd device. On successful |
| * return, the rbd_dev->header field will contain up-to-date |
| * information about the image. |
| */ |
| static int rbd_dev_v1_header_info(struct rbd_device *rbd_dev) |
| { |
| struct rbd_image_header_ondisk *ondisk = NULL; |
| u32 snap_count = 0; |
| u64 names_size = 0; |
| u32 want_count; |
| int ret; |
| |
| /* |
| * The complete header will include an array of its 64-bit |
| * snapshot ids, followed by the names of those snapshots as |
| * a contiguous block of NUL-terminated strings. Note that |
| * the number of snapshots could change by the time we read |
| * it in, in which case we re-read it. |
| */ |
| do { |
| size_t size; |
| |
| kfree(ondisk); |
| |
| size = sizeof (*ondisk); |
| size += snap_count * sizeof (struct rbd_image_snap_ondisk); |
| size += names_size; |
| ondisk = kmalloc(size, GFP_KERNEL); |
| if (!ondisk) |
| return -ENOMEM; |
| |
| ret = rbd_obj_read_sync(rbd_dev, rbd_dev->header_name, |
| 0, size, ondisk); |
| if (ret < 0) |
| goto out; |
| if ((size_t)ret < size) { |
| ret = -ENXIO; |
| rbd_warn(rbd_dev, "short header read (want %zd got %d)", |
| size, ret); |
| goto out; |
| } |
| if (!rbd_dev_ondisk_valid(ondisk)) { |
| ret = -ENXIO; |
| rbd_warn(rbd_dev, "invalid header"); |
| goto out; |
| } |
| |
| names_size = le64_to_cpu(ondisk->snap_names_len); |
| want_count = snap_count; |
| snap_count = le32_to_cpu(ondisk->snap_count); |
| } while (snap_count != want_count); |
| |
| ret = rbd_header_from_disk(rbd_dev, ondisk); |
| out: |
| kfree(ondisk); |
| |
| return ret; |
| } |
| |
| /* |
| * Clear the rbd device's EXISTS flag if the snapshot it's mapped to |
| * has disappeared from the (just updated) snapshot context. |
| */ |
| static void rbd_exists_validate(struct rbd_device *rbd_dev) |
| { |
| u64 snap_id; |
| |
| if (!test_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags)) |
| return; |
| |
| snap_id = rbd_dev->spec->snap_id; |
| if (snap_id == CEPH_NOSNAP) |
| return; |
| |
| if (rbd_dev_snap_index(rbd_dev, snap_id) == BAD_SNAP_INDEX) |
| clear_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags); |
| } |
| |
| static int rbd_dev_refresh(struct rbd_device *rbd_dev) |
| { |
| u64 mapping_size; |
| int ret; |
| |
| rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); |
| mapping_size = rbd_dev->mapping.size; |
| mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); |
| if (rbd_dev->image_format == 1) |
| ret = rbd_dev_v1_header_info(rbd_dev); |
| else |
| ret = rbd_dev_v2_header_info(rbd_dev); |
| |
| /* If it's a mapped snapshot, validate its EXISTS flag */ |
| |
| rbd_exists_validate(rbd_dev); |
| mutex_unlock(&ctl_mutex); |
| if (mapping_size != rbd_dev->mapping.size) { |
| sector_t size; |
| |
| size = (sector_t)rbd_dev->mapping.size / SECTOR_SIZE; |
| dout("setting size to %llu sectors", (unsigned long long)size); |
| set_capacity(rbd_dev->disk, size); |
| revalidate_disk(rbd_dev->disk); |
| } |
| |
| return ret; |
| } |
| |
| static int rbd_init_disk(struct rbd_device *rbd_dev) |
| { |
| struct gendisk *disk; |
| struct request_queue *q; |
| u64 segment_size; |
| |
| /* create gendisk info */ |
| disk = alloc_disk(RBD_MINORS_PER_MAJOR); |
| if (!disk) |
| return -ENOMEM; |
| |
| snprintf(disk->disk_name, sizeof(disk->disk_name), RBD_DRV_NAME "%d", |
| rbd_dev->dev_id); |
| disk->major = rbd_dev->major; |
| disk->first_minor = 0; |
| disk->fops = &rbd_bd_ops; |
| disk->private_data = rbd_dev; |
| |
| q = blk_init_queue(rbd_request_fn, &rbd_dev->lock); |
| if (!q) |
| goto out_disk; |
| |
| /* We use the default size, but let's be explicit about it. */ |
| blk_queue_physical_block_size(q, SECTOR_SIZE); |
| |
| /* set io sizes to object size */ |
| segment_size = rbd_obj_bytes(&rbd_dev->header); |
| blk_queue_max_hw_sectors(q, segment_size / SECTOR_SIZE); |
| blk_queue_max_segment_size(q, segment_size); |
| blk_queue_io_min(q, segment_size); |
| blk_queue_io_opt(q, segment_size); |
| |
| blk_queue_merge_bvec(q, rbd_merge_bvec); |
| disk->queue = q; |
| |
| q->queuedata = rbd_dev; |
| |
| rbd_dev->disk = disk; |
| |
| return 0; |
| out_disk: |
| put_disk(disk); |
| |
| return -ENOMEM; |
| } |
| |
| /* |
| sysfs |
| */ |
| |
| static struct rbd_device *dev_to_rbd_dev(struct device *dev) |
| { |
| return container_of(dev, struct rbd_device, dev); |
| } |
| |
| static ssize_t rbd_size_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); |
| |
| return sprintf(buf, "%llu\n", |
| (unsigned long long)rbd_dev->mapping.size); |
| } |
| |
| /* |
| * Note this shows the features for whatever's mapped, which is not |
| * necessarily the base image. |
| */ |
| static ssize_t rbd_features_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); |
| |
| return sprintf(buf, "0x%016llx\n", |
| (unsigned long long)rbd_dev->mapping.features); |
| } |
| |
| static ssize_t rbd_major_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); |
| |
| if (rbd_dev->major) |
| return sprintf(buf, "%d\n", rbd_dev->major); |
| |
| return sprintf(buf, "(none)\n"); |
| |
| } |
| |
| static ssize_t rbd_client_id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); |
| |
| return sprintf(buf, "client%lld\n", |
| ceph_client_id(rbd_dev->rbd_client->client)); |
| } |
| |
| static ssize_t rbd_pool_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); |
| |
| return sprintf(buf, "%s\n", rbd_dev->spec->pool_name); |
| } |
| |
| static ssize_t rbd_pool_id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); |
| |
| return sprintf(buf, "%llu\n", |
| (unsigned long long) rbd_dev->spec->pool_id); |
| } |
| |
| static ssize_t rbd_name_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); |
| |
| if (rbd_dev->spec->image_name) |
| return sprintf(buf, "%s\n", rbd_dev->spec->image_name); |
| |
| return sprintf(buf, "(unknown)\n"); |
| } |
| |
| static ssize_t rbd_image_id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); |
| |
| return sprintf(buf, "%s\n", rbd_dev->spec->image_id); |
| } |
| |
| /* |
| * Shows the name of the currently-mapped snapshot (or |
| * RBD_SNAP_HEAD_NAME for the base image). |
| */ |
| static ssize_t rbd_snap_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); |
| |
| return sprintf(buf, "%s\n", rbd_dev->spec->snap_name); |
| } |
| |
| /* |
| * For an rbd v2 image, shows the pool id, image id, and snapshot id |
| * for the parent image. If there is no parent, simply shows |
| * "(no parent image)". |
| */ |
| static ssize_t rbd_parent_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); |
| struct rbd_spec *spec = rbd_dev->parent_spec; |
| int count; |
| char *bufp = buf; |
| |
| if (!spec) |
| return sprintf(buf, "(no parent image)\n"); |
| |
| count = sprintf(bufp, "pool_id %llu\npool_name %s\n", |
| (unsigned long long) spec->pool_id, spec->pool_name); |
| if (count < 0) |
| return count; |
| bufp += count; |
| |
| count = sprintf(bufp, "image_id %s\nimage_name %s\n", spec->image_id, |
| spec->image_name ? spec->image_name : "(unknown)"); |
| if (count < 0) |
| return count; |
| bufp += count; |
| |
| count = sprintf(bufp, "snap_id %llu\nsnap_name %s\n", |
| (unsigned long long) spec->snap_id, spec->snap_name); |
| if (count < 0) |
| return count; |
| bufp += count; |
| |
| count = sprintf(bufp, "overlap %llu\n", rbd_dev->parent_overlap); |
| if (count < 0) |
| return count; |
| bufp += count; |
| |
| return (ssize_t) (bufp - buf); |
| } |
| |
| static ssize_t rbd_image_refresh(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, |
| size_t size) |
| { |
| struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); |
| int ret; |
| |
| ret = rbd_dev_refresh(rbd_dev); |
| if (ret) |
| rbd_warn(rbd_dev, ": manual header refresh error (%d)\n", ret); |
| |
| return ret < 0 ? ret : size; |
| } |
| |
| static DEVICE_ATTR(size, S_IRUGO, rbd_size_show, NULL); |
| static DEVICE_ATTR(features, S_IRUGO, rbd_features_show, NULL); |
| static DEVICE_ATTR(major, S_IRUGO, rbd_major_show, NULL); |
| static DEVICE_ATTR(client_id, S_IRUGO, rbd_client_id_show, NULL); |
| static DEVICE_ATTR(pool, S_IRUGO, rbd_pool_show, NULL); |
| static DEVICE_ATTR(pool_id, S_IRUGO, rbd_pool_id_show, NULL); |
| static DEVICE_ATTR(name, S_IRUGO, rbd_name_show, NULL); |
| static DEVICE_ATTR(image_id, S_IRUGO, rbd_image_id_show, NULL); |
| static DEVICE_ATTR(refresh, S_IWUSR, NULL, rbd_image_refresh); |
| static DEVICE_ATTR(current_snap, S_IRUGO, rbd_snap_show, NULL); |
| static DEVICE_ATTR(parent, S_IRUGO, rbd_parent_show, NULL); |
| |
| static struct attribute *rbd_attrs[] = { |
| &dev_attr_size.attr, |
| &dev_attr_features.attr, |
| &dev_attr_major.attr, |
| &dev_attr_client_id.attr, |
| &dev_attr_pool.attr, |
| &dev_attr_pool_id.attr, |
| &dev_attr_name.attr, |
| &dev_attr_image_id.attr, |
| &dev_attr_current_snap.attr, |
| &dev_attr_parent.attr, |
| &dev_attr_refresh.attr, |
| NULL |
| }; |
| |
| static struct attribute_group rbd_attr_group = { |
| .attrs = rbd_attrs, |
| }; |
| |
| static const struct attribute_group *rbd_attr_groups[] = { |
| &rbd_attr_group, |
| NULL |
| }; |
| |
| static void rbd_sysfs_dev_release(struct device *dev) |
| { |
| } |
| |
| static struct device_type rbd_device_type = { |
| .name = "rbd", |
| .groups = rbd_attr_groups, |
| .release = rbd_sysfs_dev_release, |
| }; |
| |
| static struct rbd_spec *rbd_spec_get(struct rbd_spec *spec) |
| { |
| kref_get(&spec->kref); |
| |
| return spec; |
| } |
| |
| static void rbd_spec_free(struct kref *kref); |
| static void rbd_spec_put(struct rbd_spec *spec) |
| { |
| if (spec) |
| kref_put(&spec->kref, rbd_spec_free); |
| } |
| |
| static struct rbd_spec *rbd_spec_alloc(void) |
| { |
| struct rbd_spec *spec; |
| |
| spec = kzalloc(sizeof (*spec), GFP_KERNEL); |
| if (!spec) |
| return NULL; |
| kref_init(&spec->kref); |
| |
| return spec; |
| } |
| |
| static void rbd_spec_free(struct kref *kref) |
| { |
| struct rbd_spec *spec = container_of(kref, struct rbd_spec, kref); |
| |
| kfree(spec->pool_name); |
| kfree(spec->image_id); |
| kfree(spec->image_name); |
| kfree(spec->snap_name); |
| kfree(spec); |
| } |
| |
| static struct rbd_device *rbd_dev_create(struct rbd_client *rbdc, |
| struct rbd_spec *spec) |
| { |
| struct rbd_device *rbd_dev; |
| |
| rbd_dev = kzalloc(sizeof (*rbd_dev), GFP_KERNEL); |
| if (!rbd_dev) |
| return NULL; |
| |
| spin_lock_init(&rbd_dev->lock); |
| rbd_dev->flags = 0; |
| INIT_LIST_HEAD(&rbd_dev->node); |
| init_rwsem(&rbd_dev->header_rwsem); |
| |
| rbd_dev->spec = spec; |
| rbd_dev->rbd_client = rbdc; |
| |
| /* Initialize the layout used for all rbd requests */ |
| |
| rbd_dev->layout.fl_stripe_unit = cpu_to_le32(1 << RBD_MAX_OBJ_ORDER); |
| rbd_dev->layout.fl_stripe_count = cpu_to_le32(1); |
| rbd_dev->layout.fl_object_size = cpu_to_le32(1 << RBD_MAX_OBJ_ORDER); |
| rbd_dev->layout.fl_pg_pool = cpu_to_le32((u32) spec->pool_id); |
| |
| return rbd_dev; |
| } |
| |
| static void rbd_dev_destroy(struct rbd_device *rbd_dev) |
| { |
| rbd_put_client(rbd_dev->rbd_client); |
| rbd_spec_put(rbd_dev->spec); |
| kfree(rbd_dev); |
| } |
| |
| /* |
| * Get the size and object order for an image snapshot, or if |
| * snap_id is CEPH_NOSNAP, gets this information for the base |
| * image. |
| */ |
| static int _rbd_dev_v2_snap_size(struct rbd_device *rbd_dev, u64 snap_id, |
| u8 *order, u64 *snap_size) |
| { |
| __le64 snapid = cpu_to_le64(snap_id); |
| int ret; |
| struct { |
| u8 order; |
| __le64 size; |
| } __attribute__ ((packed)) size_buf = { 0 }; |
| |
| ret = rbd_obj_method_sync(rbd_dev, rbd_dev->header_name, |
| "rbd", "get_size", |
| &snapid, sizeof (snapid), |
| &size_buf, sizeof (size_buf)); |
| dout("%s: rbd_obj_method_sync returned %d\n", __func__, ret); |
| if (ret < 0) |
| return ret; |
| if (ret < sizeof (size_buf)) |
| return -ERANGE; |
| |
| if (order) |
| *order = size_buf.order; |
| *snap_size = le64_to_cpu(size_buf.size); |
| |
| dout(" snap_id 0x%016llx order = %u, snap_size = %llu\n", |
| (unsigned long long)snap_id, (unsigned int)*order, |
| (unsigned long long)*snap_size); |
| |
| return 0; |
| } |
| |
| static int rbd_dev_v2_image_size(struct rbd_device *rbd_dev) |
| { |
| return _rbd_dev_v2_snap_size(rbd_dev, CEPH_NOSNAP, |
| &rbd_dev->header.obj_order, |
| &rbd_dev->header.image_size); |
| } |
| |
| static int rbd_dev_v2_object_prefix(struct rbd_device *rbd_dev) |
| { |
| void *reply_buf; |
| int ret; |
| void *p; |
| |
| reply_buf = kzalloc(RBD_OBJ_PREFIX_LEN_MAX, GFP_KERNEL); |
| if (!reply_buf) |
| return -ENOMEM; |
| |
| ret = rbd_obj_method_sync(rbd_dev, rbd_dev->header_name, |
| "rbd", "get_object_prefix", NULL, 0, |
| reply_buf, RBD_OBJ_PREFIX_LEN_MAX); |
| dout("%s: rbd_obj_method_sync returned %d\n", __func__, ret); |
| if (ret < 0) |
| goto out; |
| |
| p = reply_buf; |
| rbd_dev->header.object_prefix = ceph_extract_encoded_string(&p, |
| p + ret, NULL, GFP_NOIO); |
| ret = 0; |
| |
| if (IS_ERR(rbd_dev->header.object_prefix)) { |
| ret = PTR_ERR(rbd_dev->header.object_prefix); |
| rbd_dev->header.object_prefix = NULL; |
| } else { |
| dout(" object_prefix = %s\n", rbd_dev->header.object_prefix); |
| } |
| out: |
| kfree(reply_buf); |
| |
| return ret; |
| } |
| |
| static int _rbd_dev_v2_snap_features(struct rbd_device *rbd_dev, u64 snap_id, |
| u64 *snap_features) |
| { |
| __le64 snapid = cpu_to_le64(snap_id); |
| struct { |
| __le64 features; |
| __le64 incompat; |
| } __attribute__ ((packed)) features_buf = { 0 }; |
| u64 incompat; |
| int ret; |
| |
| ret = rbd_obj_method_sync(rbd_dev, rbd_dev->header_name, |
| "rbd", "get_features", |
| &snapid, sizeof (snapid), |
| &features_buf, sizeof (features_buf)); |
| dout("%s: rbd_obj_method_sync returned %d\n", __func__, ret); |
| if (ret < 0) |
| return ret; |
| if (ret < sizeof (features_buf)) |
| return -ERANGE; |
| |
| incompat = le64_to_cpu(features_buf.incompat); |
| if (incompat & ~RBD_FEATURES_SUPPORTED) |
| return -ENXIO; |
| |
| *snap_features = le64_to_cpu(features_buf.features); |
| |
| dout(" snap_id 0x%016llx features = 0x%016llx incompat = 0x%016llx\n", |
| (unsigned long long)snap_id, |
| (unsigned long long)*snap_features, |
| (unsigned long long)le64_to_cpu(features_buf.incompat)); |
| |
| return 0; |
| } |
| |
| static int rbd_dev_v2_features(struct rbd_device *rbd_dev) |
| { |
| return _rbd_dev_v2_snap_features(rbd_dev, CEPH_NOSNAP, |
| &rbd_dev->header.features); |
| } |
| |
| static int rbd_dev_v2_parent_info(struct rbd_device *rbd_dev) |
| { |
| struct rbd_spec *parent_spec; |
| size_t size; |
| void *reply_buf = NULL; |
| __le64 snapid; |
| void *p; |
| void *end; |
| char *image_id; |
| u64 overlap; |
| int ret; |
| |
| parent_spec = rbd_spec_alloc(); |
| if (!parent_spec) |
| return -ENOMEM; |
| |
| size = sizeof (__le64) + /* pool_id */ |
| sizeof (__le32) + RBD_IMAGE_ID_LEN_MAX + /* image_id */ |
| sizeof (__le64) + /* snap_id */ |
| sizeof (__le64); /* overlap */ |
| reply_buf = kmalloc(size, GFP_KERNEL); |
| if (!reply_buf) { |
| ret = -ENOMEM; |
| goto out_err; |
| } |
| |
| snapid = cpu_to_le64(CEPH_NOSNAP); |
| ret = rbd_obj_method_sync(rbd_dev, rbd_dev->header_name, |
| "rbd", "get_parent", |
| &snapid, sizeof (snapid), |
| reply_buf, size); |
| dout("%s: rbd_obj_method_sync returned %d\n", __func__, ret); |
| if (ret < 0) |
| goto out_err; |
| |
| p = reply_buf; |
| end = reply_buf + ret; |
| ret = -ERANGE; |
| ceph_decode_64_safe(&p, end, parent_spec->pool_id, out_err); |
| if (parent_spec->pool_id == CEPH_NOPOOL) |
| goto out; /* No parent? No problem. */ |
| |
| /* The ceph file layout needs to fit pool id in 32 bits */ |
| |
| ret = -EIO; |
| if (parent_spec->pool_id > (u64)U32_MAX) { |
| rbd_warn(NULL, "parent pool id too large (%llu > %u)\n", |
| (unsigned long long)parent_spec->pool_id, U32_MAX); |
| goto out_err; |
| } |
| |
| image_id = ceph_extract_encoded_string(&p, end, NULL, GFP_KERNEL); |
| if (IS_ERR(image_id)) { |
| ret = PTR_ERR(image_id); |
| goto out_err; |
| } |
| parent_spec->image_id = image_id; |
| ceph_decode_64_safe(&p, end, parent_spec->snap_id, out_err); |
| ceph_decode_64_safe(&p, end, overlap, out_err); |
| |
| rbd_dev->parent_overlap = overlap; |
| rbd_dev->parent_spec = parent_spec; |
| parent_spec = NULL; /* rbd_dev now owns this */ |
| out: |
| ret = 0; |
| out_err: |
| kfree(reply_buf); |
| rbd_spec_put(parent_spec); |
| |
| return ret; |
| } |
| |
| static int rbd_dev_v2_striping_info(struct rbd_device *rbd_dev) |
| { |
| struct { |
| __le64 stripe_unit; |
| __le64 stripe_count; |
| } __attribute__ ((packed)) striping_info_buf = { 0 }; |
| size_t size = sizeof (striping_info_buf); |
| void *p; |
| u64 obj_size; |
| u64 stripe_unit; |
| u64 stripe_count; |
| int ret; |
| |
| ret = rbd_obj_method_sync(rbd_dev, rbd_dev->header_name, |
| "rbd", "get_stripe_unit_count", NULL, 0, |
| (char *)&striping_info_buf, size); |
| dout("%s: rbd_obj_method_sync returned %d\n", __func__, ret); |
| if (ret < 0) |
| return ret; |
| if (ret < size) |
| return -ERANGE; |
| |
| /* |
| * We don't actually support the "fancy striping" feature |
| * (STRIPINGV2) yet, but if the striping sizes are the |
| * defaults the behavior is the same as before. So find |
| * out, and only fail if the image has non-default values. |
| */ |
| ret = -EINVAL; |
| obj_size = (u64)1 << rbd_dev->header.obj_order; |
| p = &striping_info_buf; |
| stripe_unit = ceph_decode_64(&p); |
| if (stripe_unit != obj_size) { |
| rbd_warn(rbd_dev, "unsupported stripe unit " |
| "(got %llu want %llu)", |
| stripe_unit, obj_size); |
| return -EINVAL; |
| } |
| stripe_count = ceph_decode_64(&p); |
| if (stripe_count != 1) { |
| rbd_warn(rbd_dev, "unsupported stripe count " |
| "(got %llu want 1)", stripe_count); |
| return -EINVAL; |
| } |
| rbd_dev->header.stripe_unit = stripe_unit; |
| rbd_dev->header.stripe_count = stripe_count; |
| |
| return 0; |
| } |
| |
| static char *rbd_dev_image_name(struct rbd_device *rbd_dev) |
| { |
| size_t image_id_size; |
| char *image_id; |
| void *p; |
| void *end; |
| size_t size; |
| void *reply_buf = NULL; |
| size_t len = 0; |
| char *image_name = NULL; |
| int ret; |
| |
| rbd_assert(!rbd_dev->spec->image_name); |
| |
| len = strlen(rbd_dev->spec->image_id); |
| image_id_size = sizeof (__le32) + len; |
| image_id = kmalloc(image_id_size, GFP_KERNEL); |
| if (!image_id) |
| return NULL; |
| |
| p = image_id; |
| end = image_id + image_id_size; |
| ceph_encode_string(&p, end, rbd_dev->spec->image_id, (u32)len); |
| |
| size = sizeof (__le32) + RBD_IMAGE_NAME_LEN_MAX; |
| reply_buf = kmalloc(size, GFP_KERNEL); |
| if (!reply_buf) |
| goto out; |
| |
| ret = rbd_obj_method_sync(rbd_dev, RBD_DIRECTORY, |
| "rbd", "dir_get_name", |
| image_id, image_id_size, |
| reply_buf, size); |
| if (ret < 0) |
| goto out; |
| p = reply_buf; |
| end = reply_buf + ret; |
| |
| image_name = ceph_extract_encoded_string(&p, end, &len, GFP_KERNEL); |
| if (IS_ERR(image_name)) |
| image_name = NULL; |
| else |
| dout("%s: name is %s len is %zd\n", __func__, image_name, len); |
| out: |
| kfree(reply_buf); |
| kfree(image_id); |
| |
| return image_name; |
| } |
| |
| static u64 rbd_v1_snap_id_by_name(struct rbd_device *rbd_dev, const char *name) |
| { |
| struct ceph_snap_context *snapc = rbd_dev->header.snapc; |
| const char *snap_name; |
| u32 which = 0; |
| |
| /* Skip over names until we find the one we are looking for */ |
| |
| snap_name = rbd_dev->header.snap_names; |
| while (which < snapc->num_snaps) { |
| if (!strcmp(name, snap_name)) |
| return snapc->snaps[which]; |
| snap_name += strlen(snap_name) + 1; |
| which++; |
| } |
| return CEPH_NOSNAP; |
| } |
| |
| static u64 rbd_v2_snap_id_by_name(struct rbd_device *rbd_dev, const char *name) |
| { |
| struct ceph_snap_context *snapc = rbd_dev->header.snapc; |
| u32 which; |
| bool found = false; |
| u64 snap_id; |
| |
| for (which = 0; !found && which < snapc->num_snaps; which++) { |
| const char *snap_name; |
| |
| snap_id = snapc->snaps[which]; |
| snap_name = rbd_dev_v2_snap_name(rbd_dev, snap_id); |
| if (IS_ERR(snap_name)) |
| break; |
| found = !strcmp(name, snap_name); |
| kfree(snap_name); |
| } |
| return found ? snap_id : CEPH_NOSNAP; |
| } |
| |
| /* |
| * Assumes name is never RBD_SNAP_HEAD_NAME; returns CEPH_NOSNAP if |
| * no snapshot by that name is found, or if an error occurs. |
| */ |
| static u64 rbd_snap_id_by_name(struct rbd_device *rbd_dev, const char *name) |
| { |
| if (rbd_dev->image_format == 1) |
| return rbd_v1_snap_id_by_name(rbd_dev, name); |
| |
| return rbd_v2_snap_id_by_name(rbd_dev, name); |
| } |
| |
| /* |
| * When an rbd image has a parent image, it is identified by the |
| * pool, image, and snapshot ids (not names). This function fills |
| * in the names for those ids. (It's OK if we can't figure out the |
| * name for an image id, but the pool and snapshot ids should always |
| * exist and have names.) All names in an rbd spec are dynamically |
| * allocated. |
| * |
| * When an image being mapped (not a parent) is probed, we have the |
| * pool name and pool id, image name and image id, and the snapshot |
| * name. The only thing we're missing is the snapshot id. |
| */ |
| static int rbd_dev_spec_update(struct rbd_device *rbd_dev) |
| { |
| struct ceph_osd_client *osdc = &rbd_dev->rbd_client->client->osdc; |
| struct rbd_spec *spec = rbd_dev->spec; |
| const char *pool_name; |
| const char *image_name; |
| const char *snap_name; |
| int ret; |
| |
| /* |
| * An image being mapped will have the pool name (etc.), but |
| * we need to look up the snapshot id. |
| */ |
| if (spec->pool_name) { |
| if (strcmp(spec->snap_name, RBD_SNAP_HEAD_NAME)) { |
| u64 snap_id; |
| |
| snap_id = rbd_snap_id_by_name(rbd_dev, spec->snap_name); |
| if (snap_id == CEPH_NOSNAP) |
| return -ENOENT; |
| spec->snap_id = snap_id; |
| } else { |
| spec->snap_id = CEPH_NOSNAP; |
| } |
| |
| return 0; |
| } |
| |
| /* Get the pool name; we have to make our own copy of this */ |
| |
| pool_name = ceph_pg_pool_name_by_id(osdc->osdmap, spec->pool_id); |
| if (!pool_name) { |
| rbd_warn(rbd_dev, "no pool with id %llu", spec->pool_id); |
| return -EIO; |
| } |
| pool_name = kstrdup(pool_name, GFP_KERNEL); |
| if (!pool_name) |
| return -ENOMEM; |
| |
| /* Fetch the image name; tolerate failure here */ |
| |
| image_name = rbd_dev_image_name(rbd_dev); |
| if (!image_name) |
| rbd_warn(rbd_dev, "unable to get image name"); |
| |
| /* Look up the snapshot name, and make a copy */ |
| |
| snap_name = rbd_snap_name(rbd_dev, spec->snap_id); |
| if (!snap_name) { |
| ret = -ENOMEM; |
| goto out_err; |
| } |
| |
| spec->pool_name = pool_name; |
| spec->image_name = image_name; |
| spec->snap_name = snap_name; |
| |
| return 0; |
| out_err: |
| kfree(image_name); |
| kfree(pool_name); |
| |
| return ret; |
| } |
| |
| static int rbd_dev_v2_snap_context(struct rbd_device *rbd_dev) |
| { |
| size_t size; |
| int ret; |
| void *reply_buf; |
| void *p; |
| void *end; |
| u64 seq; |
| u32 snap_count; |
| struct ceph_snap_context *snapc; |
| u32 i; |
| |
| /* |
| * We'll need room for the seq value (maximum snapshot id), |
| * snapshot count, and array of that many snapshot ids. |
| * For now we have a fixed upper limit on the number we're |
| * prepared to receive. |
| */ |
| size = sizeof (__le64) + sizeof (__le32) + |
| RBD_MAX_SNAP_COUNT * sizeof (__le64); |
| reply_buf = kzalloc(size, GFP_KERNEL); |
| if (!reply_buf) |
| return -ENOMEM; |
| |
| ret = rbd_obj_method_sync(rbd_dev, rbd_dev->header_name, |
| "rbd", "get_snapcontext", NULL, 0, |
| reply_buf, size); |
| dout("%s: rbd_obj_method_sync returned %d\n", __func__, ret); |
| if (ret < 0) |
| goto out; |
| |
| p = reply_buf; |
| end = reply_buf + ret; |
| ret = -ERANGE; |
| ceph_decode_64_safe(&p, end, seq, out); |
| ceph_decode_32_safe(&p, end, snap_count, out); |
| |
| /* |
| * Make sure the reported number of snapshot ids wouldn't go |
| * beyond the end of our buffer. But before checking that, |
| * make sure the computed size of the snapshot context we |
| * allocate is representable in a size_t. |
| */ |
| if (snap_count > (SIZE_MAX - sizeof (struct ceph_snap_context)) |
| / sizeof (u64)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| if (!ceph_has_room(&p, end, snap_count * sizeof (__le64))) |
| goto out; |
| ret = 0; |
| |
| snapc = ceph_create_snap_context(snap_count, GFP_KERNEL); |
| if (!snapc) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| snapc->seq = seq; |
| for (i = 0; i < snap_count; i++) |
| snapc->snaps[i] = ceph_decode_64(&p); |
| |
| ceph_put_snap_context(rbd_dev->header.snapc); |
| rbd_dev->header.snapc = snapc; |
| |
| dout(" snap context seq = %llu, snap_count = %u\n", |
| (unsigned long long)seq, (unsigned int)snap_count); |
| out: |
| kfree(reply_buf); |
| |
| return ret; |
| } |
| |
| static const char *rbd_dev_v2_snap_name(struct rbd_device *rbd_dev, |
| u64 snap_id) |
| { |
| size_t size; |
| void *reply_buf; |
| __le64 snapid; |
| int ret; |
| void *p; |
| void *end; |
| char *snap_name; |
| |
| size = sizeof (__le32) + RBD_MAX_SNAP_NAME_LEN; |
| reply_buf = kmalloc(size, GFP_KERNEL); |
| if (!reply_buf) |
| return ERR_PTR(-ENOMEM); |
| |
| snapid = cpu_to_le64(snap_id); |
| ret = rbd_obj_method_sync(rbd_dev, rbd_dev->header_name, |
| "rbd", "get_snapshot_name", |
| &snapid, sizeof (snapid), |
| reply_buf, size); |
| dout("%s: rbd_obj_method_sync returned %d\n", __func__, ret); |
| if (ret < 0) { |
| snap_name = ERR_PTR(ret); |
| goto out; |
| } |
| |
| p = reply_buf; |
| end = reply_buf + ret; |
| snap_name = ceph_extract_encoded_string(&p, end, NULL, GFP_KERNEL); |
| if (IS_ERR(snap_name)) |
| goto out; |
| |
| dout(" snap_id 0x%016llx snap_name = %s\n", |
| (unsigned long long)snap_id, snap_name); |
| out: |
| kfree(reply_buf); |
| |
| return snap_name; |
| } |
| |
| static int rbd_dev_v2_header_info(struct rbd_device *rbd_dev) |
| { |
| bool first_time = rbd_dev->header.object_prefix == NULL; |
| int ret; |
| |
| down_write(&rbd_dev->header_rwsem); |
| |
| if (first_time) { |
| ret = rbd_dev_v2_header_onetime(rbd_dev); |
| if (ret) |
| goto out; |
| } |
| |
| ret = rbd_dev_v2_image_size(rbd_dev); |
| if (ret) |
| goto out; |
| if (rbd_dev->spec->snap_id == CEPH_NOSNAP) |
| if (rbd_dev->mapping.size != rbd_dev->header.image_size) |
| rbd_dev->mapping.size = rbd_dev->header.image_size; |
| |
| ret = rbd_dev_v2_snap_context(rbd_dev); |
| dout("rbd_dev_v2_snap_context returned %d\n", ret); |
| if (ret) |
| goto out; |
| out: |
| up_write(&rbd_dev->header_rwsem); |
| |
| return ret; |
| } |
| |
| static int rbd_bus_add_dev(struct rbd_device *rbd_dev) |
| { |
| struct device *dev; |
| int ret; |
| |
| mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); |
| |
| dev = &rbd_dev->dev; |
| dev->bus = &rbd_bus_type; |
| dev->type = &rbd_device_type; |
| dev->parent = &rbd_root_dev; |
| dev->release = rbd_dev_device_release; |
| dev_set_name(dev, "%d", rbd_dev->dev_id); |
| ret = device_register(dev); |
| |
| mutex_unlock(&ctl_mutex); |
| |
| return ret; |
| } |
| |
| static void rbd_bus_del_dev(struct rbd_device *rbd_dev) |
| { |
| device_unregister(&rbd_dev->dev); |
| } |
| |
| static atomic64_t rbd_dev_id_max = ATOMIC64_INIT(0); |
| |
| /* |
| * Get a unique rbd identifier for the given new rbd_dev, and add |
| * the rbd_dev to the global list. The minimum rbd id is 1. |
| */ |
| static void rbd_dev_id_get(struct rbd_device *rbd_dev) |
| { |
| rbd_dev->dev_id = atomic64_inc_return(&rbd_dev_id_max); |
| |
| spin_lock(&rbd_dev_list_lock); |
| list_add_tail(&rbd_dev->node, &rbd_dev_list); |
| spin_unlock(&rbd_dev_list_lock); |
| dout("rbd_dev %p given dev id %llu\n", rbd_dev, |
| (unsigned long long) rbd_dev->dev_id); |
| } |
| |
| /* |
| * Remove an rbd_dev from the global list, and record that its |
| * identifier is no longer in use. |
| */ |
| static void rbd_dev_id_put(struct rbd_device *rbd_dev) |
| { |
| struct list_head *tmp; |
| int rbd_id = rbd_dev->dev_id; |
| int max_id; |
| |
| rbd_assert(rbd_id > 0); |
| |
| dout("rbd_dev %p released dev id %llu\n", rbd_dev, |
| (unsigned long long) rbd_dev->dev_id); |
| spin_lock(&rbd_dev_list_lock); |
| list_del_init(&rbd_dev->node); |
| |
| /* |
| * If the id being "put" is not the current maximum, there |
| * is nothing special we need to do. |
| */ |
| if (rbd_id != atomic64_read(&rbd_dev_id_max)) { |
| spin_unlock(&rbd_dev_list_lock); |
| return; |
| } |
| |
| /* |
| * We need to update the current maximum id. Search the |
| * list to find out what it is. We're more likely to find |
| * the maximum at the end, so search the list backward. |
| */ |
| max_id = 0; |
| list_for_each_prev(tmp, &rbd_dev_list) { |
| struct rbd_device *rbd_dev; |
| |
| rbd_dev = list_entry(tmp, struct rbd_device, node); |
| if (rbd_dev->dev_id > max_id) |
| max_id = rbd_dev->dev_id; |
| } |
| spin_unlock(&rbd_dev_list_lock); |
| |
| /* |
| * The max id could have been updated by rbd_dev_id_get(), in |
| * which case it now accurately reflects the new maximum. |
| * Be careful not to overwrite the maximum value in that |
| * case. |
| */ |
| atomic64_cmpxchg(&rbd_dev_id_max, rbd_id, max_id); |
| dout(" max dev id has been reset\n"); |
| } |
| |
| /* |
| * Skips over white space at *buf, and updates *buf to point to the |
| * first found non-space character (if any). Returns the length of |
| * the token (string of non-white space characters) found. Note |
| * that *buf must be terminated with '\0'. |
| */ |
| static inline size_t next_token(const char **buf) |
| { |
| /* |
| * These are the characters that produce nonzero for |
| * isspace() in the "C" and "POSIX" locales. |
| */ |
| const char *spaces = " \f\n\r\t\v"; |
| |
| *buf += strspn(*buf, spaces); /* Find start of token */ |
| |
| return strcspn(*buf, spaces); /* Return token length */ |
| } |
| |
| /* |
| * Finds the next token in *buf, and if the provided token buffer is |
| * big enough, copies the found token into it. The result, if |
| * copied, is guaranteed to be terminated with '\0'. Note that *buf |
| * must be terminated with '\0' on entry. |
| * |
| * Returns the length of the token found (not including the '\0'). |
| * Return value will be 0 if no token is found, and it will be >= |
| * token_size if the token would not fit. |
| * |
| * The *buf pointer will be updated to point beyond the end of the |
| * found token. Note that this occurs even if the token buffer is |
| * too small to hold it. |
| */ |
| static inline size_t copy_token(const char **buf, |
| char *token, |
| size_t token_size) |
| { |
| size_t len; |
| |
| len = next_token(buf); |
| if (len < token_size) { |
| memcpy(token, *buf, len); |
| *(token + len) = '\0'; |
| } |
| *buf += len; |
| |
| return len; |
| } |
| |
| /* |
| * Finds the next token in *buf, dynamically allocates a buffer big |
| * enough to hold a copy of it, and copies the token into the new |
| * buffer. The copy is guaranteed to be terminated with '\0'. Note |
| * that a duplicate buffer is created even for a zero-length token. |
| * |
| * Returns a pointer to the newly-allocated duplicate, or a null |
| * pointer if memory for the duplicate was not available. If |
| * the lenp argument is a non-null pointer, the length of the token |
| * (not including the '\0') is returned in *lenp. |
| * |
| * If successful, the *buf pointer will be updated to point beyond |
| * the end of the found token. |
| * |
| * Note: uses GFP_KERNEL for allocation. |
| */ |
| static inline char *dup_token(const char **buf, size_t *lenp) |
| { |
| char *dup; |
| size_t len; |
| |
| len = next_token(buf); |
| dup = kmemdup(*buf, len + 1, GFP_KERNEL); |
| if (!dup) |
| return NULL; |
| *(dup + len) = '\0'; |
| *buf += len; |
| |
| if (lenp) |
| *lenp = len; |
| |
| return dup; |
| } |
| |
| /* |
| * Parse the options provided for an "rbd add" (i.e., rbd image |
| * mapping) request. These arrive via a write to /sys/bus/rbd/add, |
| * and the data written is passed here via a NUL-terminated buffer. |
| * Returns 0 if successful or an error code otherwise. |
| * |
| * The information extracted from these options is recorded in |
| * the other parameters which return dynamically-allocated |
| * structures: |
| * ceph_opts |
| * The address of a pointer that will refer to a ceph options |
| * structure. Caller must release the returned pointer using |
| * ceph_destroy_options() when it is no longer needed. |
| * rbd_opts |
| * Address of an rbd options pointer. Fully initialized by |
| * this function; caller must release with kfree(). |
| * spec |
| * Address of an rbd image specification pointer. Fully |
| * initialized by this function based on parsed options. |
| * Caller must release with rbd_spec_put(). |
| * |
| * The options passed take this form: |
| * <mon_addrs> <options> <pool_name> <image_name> [<snap_id>] |
| * where: |
| * <mon_addrs> |
| * A comma-separated list of one or more monitor addresses. |
| * A monitor address is an ip address, optionally followed |
| * by a port number (separated by a colon). |
| * I.e.: ip1[:port1][,ip2[:port2]...] |
| * <options> |
| * A comma-separated list of ceph and/or rbd options. |
| * <pool_name> |
| * The name of the rados pool containing the rbd image. |
| * <image_name> |
| * The name of the image in that pool to map. |
| * <snap_id> |
| * An optional snapshot id. If provided, the mapping will |
| * present data from the image at the time that snapshot was |
| * created. The image head is used if no snapshot id is |
| * provided. Snapshot mappings are always read-only. |
| */ |
| static int rbd_add_parse_args(const char *buf, |
| struct ceph_options **ceph_opts, |
| struct rbd_options **opts, |
| struct rbd_spec **rbd_spec) |
| { |
| size_t len; |
| char *options; |
| const char *mon_addrs; |
| char *snap_name; |
| size_t mon_addrs_size; |
| struct rbd_spec *spec = NULL; |
| struct rbd_options *rbd_opts = NULL; |
| struct ceph_options *copts; |
| int ret; |
| |
| /* The first four tokens are required */ |
| |
| len = next_token(&buf); |
| if (!len) { |
| rbd_warn(NULL, "no monitor address(es) provided"); |
| return -EINVAL; |
| } |
| mon_addrs = buf; |
| mon_addrs_size = len + 1; |
| buf += len; |
| |
| ret = -EINVAL; |
| options = dup_token(&buf, NULL); |
| if (!options) |
| return -ENOMEM; |
| if (!*options) { |
| rbd_warn(NULL, "no options provided"); |
| goto out_err; |
| } |
| |
| spec = rbd_spec_alloc(); |
| if (!spec) |
| goto out_mem; |
| |
| spec->pool_name = dup_token(&buf, NULL); |
| if (!spec->pool_name) |
| goto out_mem; |
| if (!*spec->pool_name) { |
| rbd_warn(NULL, "no pool name provided"); |
| goto out_err; |
| } |
| |
| spec->image_name = dup_token(&buf, NULL); |
| if (!spec->image_name) |
| goto out_mem; |
| if (!*spec->image_name) { |
| rbd_warn(NULL, "no image name provided"); |
| goto out_err; |
| } |
| |
| /* |
| * Snapshot name is optional; default is to use "-" |
| * (indicating the head/no snapshot). |
| */ |
| len = next_token(&buf); |
| if (!len) { |
| buf = RBD_SNAP_HEAD_NAME; /* No snapshot supplied */ |
| len = sizeof (RBD_SNAP_HEAD_NAME) - 1; |
| } else if (len > RBD_MAX_SNAP_NAME_LEN) { |
| ret = -ENAMETOOLONG; |
| goto out_err; |
| } |
| snap_name = kmemdup(buf, len + 1, GFP_KERNEL); |
| if (!snap_name) |
| goto out_mem; |
| *(snap_name + len) = '\0'; |
| spec->snap_name = snap_name; |
| |
| /* Initialize all rbd options to the defaults */ |
| |
| rbd_opts = kzalloc(sizeof (*rbd_opts), GFP_KERNEL); |
| if (!rbd_opts) |
| goto out_mem; |
| |
| rbd_opts->read_only = RBD_READ_ONLY_DEFAULT; |
| |
| copts = ceph_parse_options(options, mon_addrs, |
| mon_addrs + mon_addrs_size - 1, |
| parse_rbd_opts_token, rbd_opts); |
| if (IS_ERR(copts)) { |
| ret = PTR_ERR(copts); |
| goto out_err; |
| } |
| kfree(options); |
| |
| *ceph_opts = copts; |
| *opts = rbd_opts; |
| *rbd_spec = spec; |
| |
| return 0; |
| out_mem: |
| ret = -ENOMEM; |
| out_err: |
| kfree(rbd_opts); |
| rbd_spec_put(spec); |
| kfree(options); |
| |
| return ret; |
| } |
| |
| /* |
| * An rbd format 2 image has a unique identifier, distinct from the |
| * name given to it by the user. Internally, that identifier is |
| * what's used to specify the names of objects related to the image. |
| * |
| * A special "rbd id" object is used to map an rbd image name to its |
| * id. If that object doesn't exist, then there is no v2 rbd image |
| * with the supplied name. |
| * |
| * This function will record the given rbd_dev's image_id field if |
| * it can be determined, and in that case will return 0. If any |
| * errors occur a negative errno will be returned and the rbd_dev's |
| * image_id field will be unchanged (and should be NULL). |
| */ |
| static int rbd_dev_image_id(struct rbd_device *rbd_dev) |
| { |
| int ret; |
| size_t size; |
| char *object_name; |
| void *response; |
| char *image_id; |
| |
| /* |
| * When probing a parent image, the image id is already |
| * known (and the image name likely is not). There's no |
| * need to fetch the image id again in this case. We |
| * do still need to set the image format though. |
| */ |
| if (rbd_dev->spec->image_id) { |
| rbd_dev->image_format = *rbd_dev->spec->image_id ? 2 : 1; |
| |
| return 0; |
| } |
| |
| /* |
| * First, see if the format 2 image id file exists, and if |
| * so, get the image's persistent id from it. |
| */ |
| size = sizeof (RBD_ID_PREFIX) + strlen(rbd_dev->spec->image_name); |
| object_name = kmalloc(size, GFP_NOIO); |
| if (!object_name) |
| return -ENOMEM; |
| sprintf(object_name, "%s%s", RBD_ID_PREFIX, rbd_dev->spec->image_name); |
| dout("rbd id object name is %s\n", object_name); |
| |
| /* Response will be an encoded string, which includes a length */ |
| |
| size = sizeof (__le32) + RBD_IMAGE_ID_LEN_MAX; |
| response = kzalloc(size, GFP_NOIO); |
| if (!response) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* If it doesn't exist we'll assume it's a format 1 image */ |
| |
| ret = rbd_obj_method_sync(rbd_dev, object_name, |
| "rbd", "get_id", NULL, 0, |
| response, RBD_IMAGE_ID_LEN_MAX); |
| dout("%s: rbd_obj_method_sync returned %d\n", __func__, ret); |
| if (ret == -ENOENT) { |
| image_id = kstrdup("", GFP_KERNEL); |
| ret = image_id ? 0 : -ENOMEM; |
| if (!ret) |
| rbd_dev->image_format = 1; |
| } else if (ret > sizeof (__le32)) { |
| void *p = response; |
| |
| image_id = ceph_extract_encoded_string(&p, p + ret, |
| NULL, GFP_NOIO); |
| ret = IS_ERR(image_id) ? PTR_ERR(image_id) : 0; |
| if (!ret) |
| rbd_dev->image_format = 2; |
| } else { |
| ret = -EINVAL; |
| } |
| |
| if (!ret) { |
| rbd_dev->spec->image_id = image_id; |
| dout("image_id is %s\n", image_id); |
| } |
| out: |
| kfree(response); |
| kfree(object_name); |
| |
| return ret; |
| } |
| |
| /* Undo whatever state changes are made by v1 or v2 image probe */ |
| |
| static void rbd_dev_unprobe(struct rbd_device *rbd_dev) |
| { |
| struct rbd_image_header *header; |
| |
| rbd_dev_remove_parent(rbd_dev); |
| rbd_spec_put(rbd_dev->parent_spec); |
| rbd_dev->parent_spec = NULL; |
| rbd_dev->parent_overlap = 0; |
| |
| /* Free dynamic fields from the header, then zero it out */ |
| |
| header = &rbd_dev->header; |
| ceph_put_snap_context(header->snapc); |
| kfree(header->snap_sizes); |
| kfree(header->snap_names); |
| kfree(header->object_prefix); |
| memset(header, 0, sizeof (*header)); |
| } |
| |
| static int rbd_dev_v2_header_onetime(struct rbd_device *rbd_dev) |
| { |
| int ret; |
| |
| ret = rbd_dev_v2_object_prefix(rbd_dev); |
| if (ret) |
| goto out_err; |
| |
| /* |
| * Get the and check features for the image. Currently the |
| * features are assumed to never change. |
| */ |
| ret = rbd_dev_v2_features(rbd_dev); |
| if (ret) |
| goto out_err; |
| |
| /* If the image supports layering, get the parent info */ |
| |
| if (rbd_dev->header.features & RBD_FEATURE_LAYERING) { |
| ret = rbd_dev_v2_parent_info(rbd_dev); |
| if (ret) |
| goto out_err; |
| /* |
| * Print a warning if this image has a parent. |
| * Don't print it if the image now being probed |
| * is itself a parent. We can tell at this point |
| * because we won't know its pool name yet (just its |
| * pool id). |
| */ |
| if (rbd_dev->parent_spec && rbd_dev->spec->pool_name) |
| rbd_warn(rbd_dev, "WARNING: kernel layering " |
| "is EXPERIMENTAL!"); |
| } |
| |
| /* If the image supports fancy striping, get its parameters */ |
| |
| if (rbd_dev->header.features & RBD_FEATURE_STRIPINGV2) { |
| ret = rbd_dev_v2_striping_info(rbd_dev); |
| if (ret < 0) |
| goto out_err; |
| } |
| /* No support for crypto and compression type format 2 images */ |
| |
| return 0; |
| out_err: |
| rbd_dev->parent_overlap = 0; |
| rbd_spec_put(rbd_dev->parent_spec); |
| rbd_dev->parent_spec = NULL; |
| kfree(rbd_dev->header_name); |
| rbd_dev->header_name = NULL; |
| kfree(rbd_dev->header.object_prefix); |
| rbd_dev->header.object_prefix = NULL; |
| |
| return ret; |
| } |
| |
| static int rbd_dev_probe_parent(struct rbd_device *rbd_dev) |
| { |
| struct rbd_device *parent = NULL; |
| struct rbd_spec *parent_spec; |
| struct rbd_client *rbdc; |
| int ret; |
| |
| if (!rbd_dev->parent_spec) |
| return 0; |
| /* |
| * We need to pass a reference to the client and the parent |
| * spec when creating the parent rbd_dev. Images related by |
| * parent/child relationships always share both. |
| */ |
| parent_spec = rbd_spec_get(rbd_dev->parent_spec); |
| rbdc = __rbd_get_client(rbd_dev->rbd_client); |
| |
| ret = -ENOMEM; |
| parent = rbd_dev_create(rbdc, parent_spec); |
| if (!parent) |
| goto out_err; |
| |
| ret = rbd_dev_image_probe(parent, false); |
| if (ret < 0) |
| goto out_err; |
| rbd_dev->parent = parent; |
| |
| return 0; |
| out_err: |
| if (parent) { |
| rbd_spec_put(rbd_dev->parent_spec); |
| kfree(rbd_dev->header_name); |
| rbd_dev_destroy(parent); |
| } else { |
| rbd_put_client(rbdc); |
| rbd_spec_put(parent_spec); |
| } |
| |
| return ret; |
| } |
| |
| static int rbd_dev_device_setup(struct rbd_device *rbd_dev) |
| { |
| int ret; |
| |
| /* generate unique id: find highest unique id, add one */ |
| rbd_dev_id_get(rbd_dev); |
| |
| /* Fill in the device name, now that we have its id. */ |
| BUILD_BUG_ON(DEV_NAME_LEN |
| < sizeof (RBD_DRV_NAME) + MAX_INT_FORMAT_WIDTH); |
| sprintf(rbd_dev->name, "%s%d", RBD_DRV_NAME, rbd_dev->dev_id); |
| |
| /* Get our block major device number. */ |
| |
| ret = register_blkdev(0, rbd_dev->name); |
| if (ret < 0) |
| goto err_out_id; |
| rbd_dev->major = ret; |
| |
| /* Set up the blkdev mapping. */ |
| |
| ret = rbd_init_disk(rbd_dev); |
| if (ret) |
| goto err_out_blkdev; |
| |
| ret = rbd_dev_mapping_set(rbd_dev); |
| if (ret) |
| goto err_out_disk; |
| set_capacity(rbd_dev->disk, rbd_dev->mapping.size / SECTOR_SIZE); |
| |
| ret = rbd_bus_add_dev(rbd_dev); |
| if (ret) |
| goto err_out_mapping; |
| |
| /* Everything's ready. Announce the disk to the world. */ |
| |
| set_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags); |
| add_disk(rbd_dev->disk); |
| |
| pr_info("%s: added with size 0x%llx\n", rbd_dev->disk->disk_name, |
| (unsigned long long) rbd_dev->mapping.size); |
| |
| return ret; |
| |
| err_out_mapping: |
| rbd_dev_mapping_clear(rbd_dev); |
| err_out_disk: |
| rbd_free_disk(rbd_dev); |
| err_out_blkdev: |
| unregister_blkdev(rbd_dev->major, rbd_dev->name); |
| err_out_id: |
| rbd_dev_id_put(rbd_dev); |
| rbd_dev_mapping_clear(rbd_dev); |
| |
| return ret; |
| } |
| |
| static int rbd_dev_header_name(struct rbd_device *rbd_dev) |
| { |
| struct rbd_spec *spec = rbd_dev->spec; |
| size_t size; |
| |
| /* Record the header object name for this rbd image. */ |
| |
| rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); |
| |
| if (rbd_dev->image_format == 1) |
| size = strlen(spec->image_name) + sizeof (RBD_SUFFIX); |
| else |
| size = sizeof (RBD_HEADER_PREFIX) + strlen(spec->image_id); |
| |
| rbd_dev->header_name = kmalloc(size, GFP_KERNEL); |
| if (!rbd_dev->header_name) |
| return -ENOMEM; |
| |
| if (rbd_dev->image_format == 1) |
| sprintf(rbd_dev->header_name, "%s%s", |
| spec->image_name, RBD_SUFFIX); |
| else |
| sprintf(rbd_dev->header_name, "%s%s", |
| RBD_HEADER_PREFIX, spec->image_id); |
| return 0; |
| } |
| |
| static void rbd_dev_image_release(struct rbd_device *rbd_dev) |
| { |
| rbd_dev_unprobe(rbd_dev); |
| kfree(rbd_dev->header_name); |
| rbd_dev->header_name = NULL; |
| rbd_dev->image_format = 0; |
| kfree(rbd_dev->spec->image_id); |
| rbd_dev->spec->image_id = NULL; |
| |
| rbd_dev_destroy(rbd_dev); |
| } |
| |
| /* |
| * Probe for the existence of the header object for the given rbd |
| * device. If this image is the one being mapped (i.e., not a |
| * parent), initiate a watch on its header object before using that |
| * object to get detailed information about the rbd image. |
| */ |
| static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping) |
| { |
| int ret; |
| int tmp; |
| |
| /* |
| * Get the id from the image id object. If it's not a |
| * format 2 image, we'll get ENOENT back, and we'll assume |
| * it's a format 1 image. |
| */ |
| ret = rbd_dev_image_id(rbd_dev); |
| if (ret) |
| return ret; |
| rbd_assert(rbd_dev->spec->image_id); |
| rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); |
| |
| ret = rbd_dev_header_name(rbd_dev); |
| if (ret) |
| goto err_out_format; |
| |
| if (mapping) { |
| ret = rbd_dev_header_watch_sync(rbd_dev, true); |
| if (ret) |
| goto out_header_name; |
| } |
| |
| if (rbd_dev->image_format == 1) |
| ret = rbd_dev_v1_header_info(rbd_dev); |
| else |
| ret = rbd_dev_v2_header_info(rbd_dev); |
| if (ret) |
| goto err_out_watch; |
| |
| ret = rbd_dev_spec_update(rbd_dev); |
| if (ret) |
| goto err_out_probe; |
| |
| ret = rbd_dev_probe_parent(rbd_dev); |
| if (ret) |
| goto err_out_probe; |
| |
| dout("discovered format %u image, header name is %s\n", |
| rbd_dev->image_format, rbd_dev->header_name); |
| |
| return 0; |
| err_out_probe: |
| rbd_dev_unprobe(rbd_dev); |
| err_out_watch: |
| if (mapping) { |
| tmp = rbd_dev_header_watch_sync(rbd_dev, false); |
| if (tmp) |
| rbd_warn(rbd_dev, "unable to tear down " |
| "watch request (%d)\n", tmp); |
| } |
| out_header_name: |
| kfree(rbd_dev->header_name); |
| rbd_dev->header_name = NULL; |
| err_out_format: |
| rbd_dev->image_format = 0; |
| kfree(rbd_dev->spec->image_id); |
| rbd_dev->spec->image_id = NULL; |
| |
| dout("probe failed, returning %d\n", ret); |
| |
| return ret; |
| } |
| |
| static ssize_t rbd_add(struct bus_type *bus, |
| const char *buf, |
| size_t count) |
| { |
| struct rbd_device *rbd_dev = NULL; |
| struct ceph_options *ceph_opts = NULL; |
| struct rbd_options *rbd_opts = NULL; |
| struct rbd_spec *spec = NULL; |
| struct rbd_client *rbdc; |
| struct ceph_osd_client *osdc; |
| bool read_only; |
| int rc = -ENOMEM; |
| |
| if (!try_module_get(THIS_MODULE)) |
| return -ENODEV; |
| |
| /* parse add command */ |
| rc = rbd_add_parse_args(buf, &ceph_opts, &rbd_opts, &spec); |
| if (rc < 0) |
| goto err_out_module; |
| read_only = rbd_opts->read_only; |
| kfree(rbd_opts); |
| rbd_opts = NULL; /* done with this */ |
| |
| rbdc = rbd_get_client(ceph_opts); |
| if (IS_ERR(rbdc)) { |
| rc = PTR_ERR(rbdc); |
| goto err_out_args; |
| } |
| ceph_opts = NULL; /* rbd_dev client now owns this */ |
| |
| /* pick the pool */ |
| osdc = &rbdc->client->osdc; |
| rc = ceph_pg_poolid_by_name(osdc->osdmap, spec->pool_name); |
| if (rc < 0) |
| goto err_out_client; |
| spec->pool_id = (u64)rc; |
| |
| /* The ceph file layout needs to fit pool id in 32 bits */ |
| |
| if (spec->pool_id > (u64)U32_MAX) { |
| rbd_warn(NULL, "pool id too large (%llu > %u)\n", |
| (unsigned long long)spec->pool_id, U32_MAX); |
| rc = -EIO; |
| goto err_out_client; |
| } |
| |
| rbd_dev = rbd_dev_create(rbdc, spec); |
| if (!rbd_dev) |
| goto err_out_client; |
| rbdc = NULL; /* rbd_dev now owns this */ |
| spec = NULL; /* rbd_dev now owns this */ |
| |
| rc = rbd_dev_image_probe(rbd_dev, true); |
| if (rc < 0) |
| goto err_out_rbd_dev; |
| |
| /* If we are mapping a snapshot it must be marked read-only */ |
| |
| if (rbd_dev->spec->snap_id != CEPH_NOSNAP) |
| read_only = true; |
| rbd_dev->mapping.read_only = read_only; |
| |
| rc = rbd_dev_device_setup(rbd_dev); |
| if (!rc) |
| return count; |
| |
| rbd_dev_image_release(rbd_dev); |
| err_out_rbd_dev: |
| rbd_dev_destroy(rbd_dev); |
| err_out_client: |
| rbd_put_client(rbdc); |
| err_out_args: |
| if (ceph_opts) |
| ceph_destroy_options(ceph_opts); |
| kfree(rbd_opts); |
| rbd_spec_put(spec); |
| err_out_module: |
| module_put(THIS_MODULE); |
| |
| dout("Error adding device %s\n", buf); |
| |
| return (ssize_t)rc; |
| } |
| |
| static struct rbd_device *__rbd_get_dev(unsigned long dev_id) |
| { |
| struct list_head *tmp; |
| struct rbd_device *rbd_dev; |
| |
| spin_lock(&rbd_dev_list_lock); |
| list_for_each(tmp, &rbd_dev_list) { |
| rbd_dev = list_entry(tmp, struct rbd_device, node); |
| if (rbd_dev->dev_id == dev_id) { |
| spin_unlock(&rbd_dev_list_lock); |
| return rbd_dev; |
| } |
| } |
| spin_unlock(&rbd_dev_list_lock); |
| return NULL; |
| } |
| |
| static void rbd_dev_device_release(struct device *dev) |
| { |
| struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); |
| |
| rbd_free_disk(rbd_dev); |
| clear_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags); |
| rbd_dev_mapping_clear(rbd_dev); |
| unregister_blkdev(rbd_dev->major, rbd_dev->name); |
| rbd_dev->major = 0; |
| rbd_dev_id_put(rbd_dev); |
| rbd_dev_mapping_clear(rbd_dev); |
| } |
| |
| static void rbd_dev_remove_parent(struct rbd_device *rbd_dev) |
| { |
| while (rbd_dev->parent) { |
| struct rbd_device *first = rbd_dev; |
| struct rbd_device *second = first->parent; |
| struct rbd_device *third; |
| |
| /* |
| * Follow to the parent with no grandparent and |
| * remove it. |
| */ |
| while (second && (third = second->parent)) { |
| first = second; |
| second = third; |
| } |
| rbd_assert(second); |
| rbd_dev_image_release(second); |
| first->parent = NULL; |
| first->parent_overlap = 0; |
| |
| rbd_assert(first->parent_spec); |
| rbd_spec_put(first->parent_spec); |
| first->parent_spec = NULL; |
| } |
| } |
| |
| static ssize_t rbd_remove(struct bus_type *bus, |
| const char *buf, |
| size_t count) |
| { |
| struct rbd_device *rbd_dev = NULL; |
| int target_id; |
| unsigned long ul; |
| int ret; |
| |
| ret = strict_strtoul(buf, 10, &ul); |
| if (ret) |
| return ret; |
| |
| /* convert to int; abort if we lost anything in the conversion */ |
| target_id = (int) ul; |
| if (target_id != ul) |
| return -EINVAL; |
| |
| mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); |
| |
| rbd_dev = __rbd_get_dev(target_id); |
| if (!rbd_dev) { |
| ret = -ENOENT; |
| goto done; |
| } |
| |
| spin_lock_irq(&rbd_dev->lock); |
| if (rbd_dev->open_count) |
| ret = -EBUSY; |
| else |
| set_bit(RBD_DEV_FLAG_REMOVING, &rbd_dev->flags); |
| spin_unlock_irq(&rbd_dev->lock); |
| if (ret < 0) |
| goto done; |
| rbd_bus_del_dev(rbd_dev); |
| ret = rbd_dev_header_watch_sync(rbd_dev, false); |
| if (ret) |
| rbd_warn(rbd_dev, "failed to cancel watch event (%d)\n", ret); |
| rbd_dev_image_release(rbd_dev); |
| module_put(THIS_MODULE); |
| ret = count; |
| done: |
| mutex_unlock(&ctl_mutex); |
| |
| return ret; |
| } |
| |
| /* |
| * create control files in sysfs |
| * /sys/bus/rbd/... |
| */ |
| static int rbd_sysfs_init(void) |
| { |
| int ret; |
| |
| ret = device_register(&rbd_root_dev); |
| if (ret < 0) |
| return ret; |
| |
| ret = bus_register(&rbd_bus_type); |
| if (ret < 0) |
| device_unregister(&rbd_root_dev); |
| |
| return ret; |
| } |
| |
| static void rbd_sysfs_cleanup(void) |
| { |
| bus_unregister(&rbd_bus_type); |
| device_unregister(&rbd_root_dev); |
| } |
| |
| static int rbd_slab_init(void) |
| { |
| rbd_assert(!rbd_img_request_cache); |
| rbd_img_request_cache = kmem_cache_create("rbd_img_request", |
| sizeof (struct rbd_img_request), |
| __alignof__(struct rbd_img_request), |
| 0, NULL); |
| if (!rbd_img_request_cache) |
| return -ENOMEM; |
| |
| rbd_assert(!rbd_obj_request_cache); |
| rbd_obj_request_cache = kmem_cache_create("rbd_obj_request", |
| sizeof (struct rbd_obj_request), |
| __alignof__(struct rbd_obj_request), |
| 0, NULL); |
| if (!rbd_obj_request_cache) |
| goto out_err; |
| |
| rbd_assert(!rbd_segment_name_cache); |
| rbd_segment_name_cache = kmem_cache_create("rbd_segment_name", |
| MAX_OBJ_NAME_SIZE + 1, 1, 0, NULL); |
| if (rbd_segment_name_cache) |
| return 0; |
| out_err: |
| if (rbd_obj_request_cache) { |
| kmem_cache_destroy(rbd_obj_request_cache); |
| rbd_obj_request_cache = NULL; |
| } |
| |
| kmem_cache_destroy(rbd_img_request_cache); |
| rbd_img_request_cache = NULL; |
| |
| return -ENOMEM; |
| } |
| |
| static void rbd_slab_exit(void) |
| { |
| rbd_assert(rbd_segment_name_cache); |
| kmem_cache_destroy(rbd_segment_name_cache); |
| rbd_segment_name_cache = NULL; |
| |
| rbd_assert(rbd_obj_request_cache); |
| kmem_cache_destroy(rbd_obj_request_cache); |
| rbd_obj_request_cache = NULL; |
| |
| rbd_assert(rbd_img_request_cache); |
| kmem_cache_destroy(rbd_img_request_cache); |
| rbd_img_request_cache = NULL; |
| } |
| |
| static int __init rbd_init(void) |
| { |
| int rc; |
| |
| if (!libceph_compatible(NULL)) { |
| rbd_warn(NULL, "libceph incompatibility (quitting)"); |
| |
| return -EINVAL; |
| } |
| rc = rbd_slab_init(); |
| if (rc) |
| return rc; |
| rc = rbd_sysfs_init(); |
| if (rc) |
| rbd_slab_exit(); |
| else |
| pr_info("loaded " RBD_DRV_NAME_LONG "\n"); |
| |
| return rc; |
| } |
| |
| static void __exit rbd_exit(void) |
| { |
| rbd_sysfs_cleanup(); |
| rbd_slab_exit(); |
| } |
| |
| module_init(rbd_init); |
| module_exit(rbd_exit); |
| |
| MODULE_AUTHOR("Sage Weil <sage@newdream.net>"); |
| MODULE_AUTHOR("Yehuda Sadeh <yehuda@hq.newdream.net>"); |
| MODULE_DESCRIPTION("rados block device"); |
| |
| /* following authorship retained from original osdblk.c */ |
| MODULE_AUTHOR("Jeff Garzik <jeff@garzik.org>"); |
| |
| MODULE_LICENSE("GPL"); |