| /* |
| * IBM Hot Plug Controller Driver |
| * |
| * Written By: Tong Yu, IBM Corporation |
| * |
| * Copyright (C) 2001,2003 Greg Kroah-Hartman (greg@kroah.com) |
| * Copyright (C) 2001-2003 IBM Corp. |
| * |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Send feedback to <gregkh@us.ibm.com> |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/errno.h> |
| #include <linux/mm.h> |
| #include <linux/slab.h> |
| #include <linux/pci.h> |
| #include <linux/list.h> |
| #include <linux/init.h> |
| #include "ibmphp.h" |
| |
| /* |
| * POST builds data blocks(in this data block definition, a char-1 |
| * byte, short(or word)-2 byte, long(dword)-4 byte) in the Extended |
| * BIOS Data Area which describe the configuration of the hot-plug |
| * controllers and resources used by the PCI Hot-Plug devices. |
| * |
| * This file walks EBDA, maps data block from physical addr, |
| * reconstruct linked lists about all system resource(MEM, PFM, IO) |
| * already assigned by POST, as well as linked lists about hot plug |
| * controllers (ctlr#, slot#, bus&slot features...) |
| */ |
| |
| /* Global lists */ |
| LIST_HEAD (ibmphp_ebda_pci_rsrc_head); |
| LIST_HEAD (ibmphp_slot_head); |
| |
| /* Local variables */ |
| static struct ebda_hpc_list *hpc_list_ptr; |
| static struct ebda_rsrc_list *rsrc_list_ptr; |
| static struct rio_table_hdr *rio_table_ptr = NULL; |
| static LIST_HEAD (ebda_hpc_head); |
| static LIST_HEAD (bus_info_head); |
| static LIST_HEAD (rio_vg_head); |
| static LIST_HEAD (rio_lo_head); |
| static LIST_HEAD (opt_vg_head); |
| static LIST_HEAD (opt_lo_head); |
| static void __iomem *io_mem; |
| |
| /* Local functions */ |
| static int ebda_rsrc_controller (void); |
| static int ebda_rsrc_rsrc (void); |
| static int ebda_rio_table (void); |
| |
| static struct ebda_hpc_list * __init alloc_ebda_hpc_list (void) |
| { |
| return kzalloc(sizeof(struct ebda_hpc_list), GFP_KERNEL); |
| } |
| |
| static struct controller *alloc_ebda_hpc (u32 slot_count, u32 bus_count) |
| { |
| struct controller *controller; |
| struct ebda_hpc_slot *slots; |
| struct ebda_hpc_bus *buses; |
| |
| controller = kzalloc(sizeof(struct controller), GFP_KERNEL); |
| if (!controller) |
| goto error; |
| |
| slots = kcalloc(slot_count, sizeof(struct ebda_hpc_slot), GFP_KERNEL); |
| if (!slots) |
| goto error_contr; |
| controller->slots = slots; |
| |
| buses = kcalloc(bus_count, sizeof(struct ebda_hpc_bus), GFP_KERNEL); |
| if (!buses) |
| goto error_slots; |
| controller->buses = buses; |
| |
| return controller; |
| error_slots: |
| kfree(controller->slots); |
| error_contr: |
| kfree(controller); |
| error: |
| return NULL; |
| } |
| |
| static void free_ebda_hpc (struct controller *controller) |
| { |
| kfree (controller->slots); |
| kfree (controller->buses); |
| kfree (controller); |
| } |
| |
| static struct ebda_rsrc_list * __init alloc_ebda_rsrc_list (void) |
| { |
| return kzalloc(sizeof(struct ebda_rsrc_list), GFP_KERNEL); |
| } |
| |
| static struct ebda_pci_rsrc *alloc_ebda_pci_rsrc (void) |
| { |
| return kzalloc(sizeof(struct ebda_pci_rsrc), GFP_KERNEL); |
| } |
| |
| static void __init print_bus_info (void) |
| { |
| struct bus_info *ptr; |
| struct list_head *ptr1; |
| |
| list_for_each (ptr1, &bus_info_head) { |
| ptr = list_entry (ptr1, struct bus_info, bus_info_list); |
| debug ("%s - slot_min = %x\n", __FUNCTION__, ptr->slot_min); |
| debug ("%s - slot_max = %x\n", __FUNCTION__, ptr->slot_max); |
| debug ("%s - slot_count = %x\n", __FUNCTION__, ptr->slot_count); |
| debug ("%s - bus# = %x\n", __FUNCTION__, ptr->busno); |
| debug ("%s - current_speed = %x\n", __FUNCTION__, ptr->current_speed); |
| debug ("%s - controller_id = %x\n", __FUNCTION__, ptr->controller_id); |
| |
| debug ("%s - slots_at_33_conv = %x\n", __FUNCTION__, ptr->slots_at_33_conv); |
| debug ("%s - slots_at_66_conv = %x\n", __FUNCTION__, ptr->slots_at_66_conv); |
| debug ("%s - slots_at_66_pcix = %x\n", __FUNCTION__, ptr->slots_at_66_pcix); |
| debug ("%s - slots_at_100_pcix = %x\n", __FUNCTION__, ptr->slots_at_100_pcix); |
| debug ("%s - slots_at_133_pcix = %x\n", __FUNCTION__, ptr->slots_at_133_pcix); |
| |
| } |
| } |
| |
| static void print_lo_info (void) |
| { |
| struct rio_detail *ptr; |
| struct list_head *ptr1; |
| debug ("print_lo_info ----\n"); |
| list_for_each (ptr1, &rio_lo_head) { |
| ptr = list_entry (ptr1, struct rio_detail, rio_detail_list); |
| debug ("%s - rio_node_id = %x\n", __FUNCTION__, ptr->rio_node_id); |
| debug ("%s - rio_type = %x\n", __FUNCTION__, ptr->rio_type); |
| debug ("%s - owner_id = %x\n", __FUNCTION__, ptr->owner_id); |
| debug ("%s - first_slot_num = %x\n", __FUNCTION__, ptr->first_slot_num); |
| debug ("%s - wpindex = %x\n", __FUNCTION__, ptr->wpindex); |
| debug ("%s - chassis_num = %x\n", __FUNCTION__, ptr->chassis_num); |
| |
| } |
| } |
| |
| static void print_vg_info (void) |
| { |
| struct rio_detail *ptr; |
| struct list_head *ptr1; |
| debug ("%s ---\n", __FUNCTION__); |
| list_for_each (ptr1, &rio_vg_head) { |
| ptr = list_entry (ptr1, struct rio_detail, rio_detail_list); |
| debug ("%s - rio_node_id = %x\n", __FUNCTION__, ptr->rio_node_id); |
| debug ("%s - rio_type = %x\n", __FUNCTION__, ptr->rio_type); |
| debug ("%s - owner_id = %x\n", __FUNCTION__, ptr->owner_id); |
| debug ("%s - first_slot_num = %x\n", __FUNCTION__, ptr->first_slot_num); |
| debug ("%s - wpindex = %x\n", __FUNCTION__, ptr->wpindex); |
| debug ("%s - chassis_num = %x\n", __FUNCTION__, ptr->chassis_num); |
| |
| } |
| } |
| |
| static void __init print_ebda_pci_rsrc (void) |
| { |
| struct ebda_pci_rsrc *ptr; |
| struct list_head *ptr1; |
| |
| list_for_each (ptr1, &ibmphp_ebda_pci_rsrc_head) { |
| ptr = list_entry (ptr1, struct ebda_pci_rsrc, ebda_pci_rsrc_list); |
| debug ("%s - rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n", |
| __FUNCTION__, ptr->rsrc_type ,ptr->bus_num, ptr->dev_fun,ptr->start_addr, ptr->end_addr); |
| } |
| } |
| |
| static void __init print_ibm_slot (void) |
| { |
| struct slot *ptr; |
| struct list_head *ptr1; |
| |
| list_for_each (ptr1, &ibmphp_slot_head) { |
| ptr = list_entry (ptr1, struct slot, ibm_slot_list); |
| debug ("%s - slot_number: %x\n", __FUNCTION__, ptr->number); |
| } |
| } |
| |
| static void __init print_opt_vg (void) |
| { |
| struct opt_rio *ptr; |
| struct list_head *ptr1; |
| debug ("%s ---\n", __FUNCTION__); |
| list_for_each (ptr1, &opt_vg_head) { |
| ptr = list_entry (ptr1, struct opt_rio, opt_rio_list); |
| debug ("%s - rio_type %x\n", __FUNCTION__, ptr->rio_type); |
| debug ("%s - chassis_num: %x\n", __FUNCTION__, ptr->chassis_num); |
| debug ("%s - first_slot_num: %x\n", __FUNCTION__, ptr->first_slot_num); |
| debug ("%s - middle_num: %x\n", __FUNCTION__, ptr->middle_num); |
| } |
| } |
| |
| static void __init print_ebda_hpc (void) |
| { |
| struct controller *hpc_ptr; |
| struct list_head *ptr1; |
| u16 index; |
| |
| list_for_each (ptr1, &ebda_hpc_head) { |
| |
| hpc_ptr = list_entry (ptr1, struct controller, ebda_hpc_list); |
| |
| for (index = 0; index < hpc_ptr->slot_count; index++) { |
| debug ("%s - physical slot#: %x\n", __FUNCTION__, hpc_ptr->slots[index].slot_num); |
| debug ("%s - pci bus# of the slot: %x\n", __FUNCTION__, hpc_ptr->slots[index].slot_bus_num); |
| debug ("%s - index into ctlr addr: %x\n", __FUNCTION__, hpc_ptr->slots[index].ctl_index); |
| debug ("%s - cap of the slot: %x\n", __FUNCTION__, hpc_ptr->slots[index].slot_cap); |
| } |
| |
| for (index = 0; index < hpc_ptr->bus_count; index++) { |
| debug ("%s - bus# of each bus controlled by this ctlr: %x\n", __FUNCTION__, hpc_ptr->buses[index].bus_num); |
| } |
| |
| debug ("%s - type of hpc: %x\n", __FUNCTION__, hpc_ptr->ctlr_type); |
| switch (hpc_ptr->ctlr_type) { |
| case 1: |
| debug ("%s - bus: %x\n", __FUNCTION__, hpc_ptr->u.pci_ctlr.bus); |
| debug ("%s - dev_fun: %x\n", __FUNCTION__, hpc_ptr->u.pci_ctlr.dev_fun); |
| debug ("%s - irq: %x\n", __FUNCTION__, hpc_ptr->irq); |
| break; |
| |
| case 0: |
| debug ("%s - io_start: %x\n", __FUNCTION__, hpc_ptr->u.isa_ctlr.io_start); |
| debug ("%s - io_end: %x\n", __FUNCTION__, hpc_ptr->u.isa_ctlr.io_end); |
| debug ("%s - irq: %x\n", __FUNCTION__, hpc_ptr->irq); |
| break; |
| |
| case 2: |
| case 4: |
| debug ("%s - wpegbbar: %lx\n", __FUNCTION__, hpc_ptr->u.wpeg_ctlr.wpegbbar); |
| debug ("%s - i2c_addr: %x\n", __FUNCTION__, hpc_ptr->u.wpeg_ctlr.i2c_addr); |
| debug ("%s - irq: %x\n", __FUNCTION__, hpc_ptr->irq); |
| break; |
| } |
| } |
| } |
| |
| int __init ibmphp_access_ebda (void) |
| { |
| u8 format, num_ctlrs, rio_complete, hs_complete; |
| u16 ebda_seg, num_entries, next_offset, offset, blk_id, sub_addr, re, rc_id, re_id, base; |
| int rc = 0; |
| |
| |
| rio_complete = 0; |
| hs_complete = 0; |
| |
| io_mem = ioremap ((0x40 << 4) + 0x0e, 2); |
| if (!io_mem ) |
| return -ENOMEM; |
| ebda_seg = readw (io_mem); |
| iounmap (io_mem); |
| debug ("returned ebda segment: %x\n", ebda_seg); |
| |
| io_mem = ioremap (ebda_seg<<4, 65000); |
| if (!io_mem ) |
| return -ENOMEM; |
| next_offset = 0x180; |
| |
| for (;;) { |
| offset = next_offset; |
| next_offset = readw (io_mem + offset); /* offset of next blk */ |
| |
| offset += 2; |
| if (next_offset == 0) /* 0 indicate it's last blk */ |
| break; |
| blk_id = readw (io_mem + offset); /* this blk id */ |
| |
| offset += 2; |
| /* check if it is hot swap block or rio block */ |
| if (blk_id != 0x4853 && blk_id != 0x4752) |
| continue; |
| /* found hs table */ |
| if (blk_id == 0x4853) { |
| debug ("now enter hot swap block---\n"); |
| debug ("hot blk id: %x\n", blk_id); |
| format = readb (io_mem + offset); |
| |
| offset += 1; |
| if (format != 4) |
| goto error_nodev; |
| debug ("hot blk format: %x\n", format); |
| /* hot swap sub blk */ |
| base = offset; |
| |
| sub_addr = base; |
| re = readw (io_mem + sub_addr); /* next sub blk */ |
| |
| sub_addr += 2; |
| rc_id = readw (io_mem + sub_addr); /* sub blk id */ |
| |
| sub_addr += 2; |
| if (rc_id != 0x5243) |
| goto error_nodev; |
| /* rc sub blk signature */ |
| num_ctlrs = readb (io_mem + sub_addr); |
| |
| sub_addr += 1; |
| hpc_list_ptr = alloc_ebda_hpc_list (); |
| if (!hpc_list_ptr) { |
| rc = -ENOMEM; |
| goto out; |
| } |
| hpc_list_ptr->format = format; |
| hpc_list_ptr->num_ctlrs = num_ctlrs; |
| hpc_list_ptr->phys_addr = sub_addr; /* offset of RSRC_CONTROLLER blk */ |
| debug ("info about hpc descriptor---\n"); |
| debug ("hot blk format: %x\n", format); |
| debug ("num of controller: %x\n", num_ctlrs); |
| debug ("offset of hpc data structure enteries: %x\n ", sub_addr); |
| |
| sub_addr = base + re; /* re sub blk */ |
| /* FIXME: rc is never used/checked */ |
| rc = readw (io_mem + sub_addr); /* next sub blk */ |
| |
| sub_addr += 2; |
| re_id = readw (io_mem + sub_addr); /* sub blk id */ |
| |
| sub_addr += 2; |
| if (re_id != 0x5245) |
| goto error_nodev; |
| |
| /* signature of re */ |
| num_entries = readw (io_mem + sub_addr); |
| |
| sub_addr += 2; /* offset of RSRC_ENTRIES blk */ |
| rsrc_list_ptr = alloc_ebda_rsrc_list (); |
| if (!rsrc_list_ptr ) { |
| rc = -ENOMEM; |
| goto out; |
| } |
| rsrc_list_ptr->format = format; |
| rsrc_list_ptr->num_entries = num_entries; |
| rsrc_list_ptr->phys_addr = sub_addr; |
| |
| debug ("info about rsrc descriptor---\n"); |
| debug ("format: %x\n", format); |
| debug ("num of rsrc: %x\n", num_entries); |
| debug ("offset of rsrc data structure enteries: %x\n ", sub_addr); |
| |
| hs_complete = 1; |
| } else { |
| /* found rio table, blk_id == 0x4752 */ |
| debug ("now enter io table ---\n"); |
| debug ("rio blk id: %x\n", blk_id); |
| |
| rio_table_ptr = kzalloc(sizeof(struct rio_table_hdr), GFP_KERNEL); |
| if (!rio_table_ptr) |
| return -ENOMEM; |
| rio_table_ptr->ver_num = readb (io_mem + offset); |
| rio_table_ptr->scal_count = readb (io_mem + offset + 1); |
| rio_table_ptr->riodev_count = readb (io_mem + offset + 2); |
| rio_table_ptr->offset = offset +3 ; |
| |
| debug("info about rio table hdr ---\n"); |
| debug("ver_num: %x\nscal_count: %x\nriodev_count: %x\noffset of rio table: %x\n ", |
| rio_table_ptr->ver_num, rio_table_ptr->scal_count, |
| rio_table_ptr->riodev_count, rio_table_ptr->offset); |
| |
| rio_complete = 1; |
| } |
| } |
| |
| if (!hs_complete && !rio_complete) |
| goto error_nodev; |
| |
| if (rio_table_ptr) { |
| if (rio_complete && rio_table_ptr->ver_num == 3) { |
| rc = ebda_rio_table (); |
| if (rc) |
| goto out; |
| } |
| } |
| rc = ebda_rsrc_controller (); |
| if (rc) |
| goto out; |
| |
| rc = ebda_rsrc_rsrc (); |
| goto out; |
| error_nodev: |
| rc = -ENODEV; |
| out: |
| iounmap (io_mem); |
| return rc; |
| } |
| |
| /* |
| * map info of scalability details and rio details from physical address |
| */ |
| static int __init ebda_rio_table (void) |
| { |
| u16 offset; |
| u8 i; |
| struct rio_detail *rio_detail_ptr; |
| |
| offset = rio_table_ptr->offset; |
| offset += 12 * rio_table_ptr->scal_count; |
| |
| // we do concern about rio details |
| for (i = 0; i < rio_table_ptr->riodev_count; i++) { |
| rio_detail_ptr = kzalloc(sizeof(struct rio_detail), GFP_KERNEL); |
| if (!rio_detail_ptr) |
| return -ENOMEM; |
| rio_detail_ptr->rio_node_id = readb (io_mem + offset); |
| rio_detail_ptr->bbar = readl (io_mem + offset + 1); |
| rio_detail_ptr->rio_type = readb (io_mem + offset + 5); |
| rio_detail_ptr->owner_id = readb (io_mem + offset + 6); |
| rio_detail_ptr->port0_node_connect = readb (io_mem + offset + 7); |
| rio_detail_ptr->port0_port_connect = readb (io_mem + offset + 8); |
| rio_detail_ptr->port1_node_connect = readb (io_mem + offset + 9); |
| rio_detail_ptr->port1_port_connect = readb (io_mem + offset + 10); |
| rio_detail_ptr->first_slot_num = readb (io_mem + offset + 11); |
| rio_detail_ptr->status = readb (io_mem + offset + 12); |
| rio_detail_ptr->wpindex = readb (io_mem + offset + 13); |
| rio_detail_ptr->chassis_num = readb (io_mem + offset + 14); |
| // debug ("rio_node_id: %x\nbbar: %x\nrio_type: %x\nowner_id: %x\nport0_node: %x\nport0_port: %x\nport1_node: %x\nport1_port: %x\nfirst_slot_num: %x\nstatus: %x\n", rio_detail_ptr->rio_node_id, rio_detail_ptr->bbar, rio_detail_ptr->rio_type, rio_detail_ptr->owner_id, rio_detail_ptr->port0_node_connect, rio_detail_ptr->port0_port_connect, rio_detail_ptr->port1_node_connect, rio_detail_ptr->port1_port_connect, rio_detail_ptr->first_slot_num, rio_detail_ptr->status); |
| //create linked list of chassis |
| if (rio_detail_ptr->rio_type == 4 || rio_detail_ptr->rio_type == 5) |
| list_add (&rio_detail_ptr->rio_detail_list, &rio_vg_head); |
| //create linked list of expansion box |
| else if (rio_detail_ptr->rio_type == 6 || rio_detail_ptr->rio_type == 7) |
| list_add (&rio_detail_ptr->rio_detail_list, &rio_lo_head); |
| else |
| // not in my concern |
| kfree (rio_detail_ptr); |
| offset += 15; |
| } |
| print_lo_info (); |
| print_vg_info (); |
| return 0; |
| } |
| |
| /* |
| * reorganizing linked list of chassis |
| */ |
| static struct opt_rio *search_opt_vg (u8 chassis_num) |
| { |
| struct opt_rio *ptr; |
| struct list_head *ptr1; |
| list_for_each (ptr1, &opt_vg_head) { |
| ptr = list_entry (ptr1, struct opt_rio, opt_rio_list); |
| if (ptr->chassis_num == chassis_num) |
| return ptr; |
| } |
| return NULL; |
| } |
| |
| static int __init combine_wpg_for_chassis (void) |
| { |
| struct opt_rio *opt_rio_ptr = NULL; |
| struct rio_detail *rio_detail_ptr = NULL; |
| struct list_head *list_head_ptr = NULL; |
| |
| list_for_each (list_head_ptr, &rio_vg_head) { |
| rio_detail_ptr = list_entry (list_head_ptr, struct rio_detail, rio_detail_list); |
| opt_rio_ptr = search_opt_vg (rio_detail_ptr->chassis_num); |
| if (!opt_rio_ptr) { |
| opt_rio_ptr = kzalloc(sizeof(struct opt_rio), GFP_KERNEL); |
| if (!opt_rio_ptr) |
| return -ENOMEM; |
| opt_rio_ptr->rio_type = rio_detail_ptr->rio_type; |
| opt_rio_ptr->chassis_num = rio_detail_ptr->chassis_num; |
| opt_rio_ptr->first_slot_num = rio_detail_ptr->first_slot_num; |
| opt_rio_ptr->middle_num = rio_detail_ptr->first_slot_num; |
| list_add (&opt_rio_ptr->opt_rio_list, &opt_vg_head); |
| } else { |
| opt_rio_ptr->first_slot_num = min (opt_rio_ptr->first_slot_num, rio_detail_ptr->first_slot_num); |
| opt_rio_ptr->middle_num = max (opt_rio_ptr->middle_num, rio_detail_ptr->first_slot_num); |
| } |
| } |
| print_opt_vg (); |
| return 0; |
| } |
| |
| /* |
| * reorgnizing linked list of expansion box |
| */ |
| static struct opt_rio_lo *search_opt_lo (u8 chassis_num) |
| { |
| struct opt_rio_lo *ptr; |
| struct list_head *ptr1; |
| list_for_each (ptr1, &opt_lo_head) { |
| ptr = list_entry (ptr1, struct opt_rio_lo, opt_rio_lo_list); |
| if (ptr->chassis_num == chassis_num) |
| return ptr; |
| } |
| return NULL; |
| } |
| |
| static int combine_wpg_for_expansion (void) |
| { |
| struct opt_rio_lo *opt_rio_lo_ptr = NULL; |
| struct rio_detail *rio_detail_ptr = NULL; |
| struct list_head *list_head_ptr = NULL; |
| |
| list_for_each (list_head_ptr, &rio_lo_head) { |
| rio_detail_ptr = list_entry (list_head_ptr, struct rio_detail, rio_detail_list); |
| opt_rio_lo_ptr = search_opt_lo (rio_detail_ptr->chassis_num); |
| if (!opt_rio_lo_ptr) { |
| opt_rio_lo_ptr = kzalloc(sizeof(struct opt_rio_lo), GFP_KERNEL); |
| if (!opt_rio_lo_ptr) |
| return -ENOMEM; |
| opt_rio_lo_ptr->rio_type = rio_detail_ptr->rio_type; |
| opt_rio_lo_ptr->chassis_num = rio_detail_ptr->chassis_num; |
| opt_rio_lo_ptr->first_slot_num = rio_detail_ptr->first_slot_num; |
| opt_rio_lo_ptr->middle_num = rio_detail_ptr->first_slot_num; |
| opt_rio_lo_ptr->pack_count = 1; |
| |
| list_add (&opt_rio_lo_ptr->opt_rio_lo_list, &opt_lo_head); |
| } else { |
| opt_rio_lo_ptr->first_slot_num = min (opt_rio_lo_ptr->first_slot_num, rio_detail_ptr->first_slot_num); |
| opt_rio_lo_ptr->middle_num = max (opt_rio_lo_ptr->middle_num, rio_detail_ptr->first_slot_num); |
| opt_rio_lo_ptr->pack_count = 2; |
| } |
| } |
| return 0; |
| } |
| |
| |
| /* Since we don't know the max slot number per each chassis, hence go |
| * through the list of all chassis to find out the range |
| * Arguments: slot_num, 1st slot number of the chassis we think we are on, |
| * var (0 = chassis, 1 = expansion box) |
| */ |
| static int first_slot_num (u8 slot_num, u8 first_slot, u8 var) |
| { |
| struct opt_rio *opt_vg_ptr = NULL; |
| struct opt_rio_lo *opt_lo_ptr = NULL; |
| struct list_head *ptr = NULL; |
| int rc = 0; |
| |
| if (!var) { |
| list_for_each (ptr, &opt_vg_head) { |
| opt_vg_ptr = list_entry (ptr, struct opt_rio, opt_rio_list); |
| if ((first_slot < opt_vg_ptr->first_slot_num) && (slot_num >= opt_vg_ptr->first_slot_num)) { |
| rc = -ENODEV; |
| break; |
| } |
| } |
| } else { |
| list_for_each (ptr, &opt_lo_head) { |
| opt_lo_ptr = list_entry (ptr, struct opt_rio_lo, opt_rio_lo_list); |
| if ((first_slot < opt_lo_ptr->first_slot_num) && (slot_num >= opt_lo_ptr->first_slot_num)) { |
| rc = -ENODEV; |
| break; |
| } |
| } |
| } |
| return rc; |
| } |
| |
| static struct opt_rio_lo * find_rxe_num (u8 slot_num) |
| { |
| struct opt_rio_lo *opt_lo_ptr; |
| struct list_head *ptr; |
| |
| list_for_each (ptr, &opt_lo_head) { |
| opt_lo_ptr = list_entry (ptr, struct opt_rio_lo, opt_rio_lo_list); |
| //check to see if this slot_num belongs to expansion box |
| if ((slot_num >= opt_lo_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_lo_ptr->first_slot_num, 1))) |
| return opt_lo_ptr; |
| } |
| return NULL; |
| } |
| |
| static struct opt_rio * find_chassis_num (u8 slot_num) |
| { |
| struct opt_rio *opt_vg_ptr; |
| struct list_head *ptr; |
| |
| list_for_each (ptr, &opt_vg_head) { |
| opt_vg_ptr = list_entry (ptr, struct opt_rio, opt_rio_list); |
| //check to see if this slot_num belongs to chassis |
| if ((slot_num >= opt_vg_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_vg_ptr->first_slot_num, 0))) |
| return opt_vg_ptr; |
| } |
| return NULL; |
| } |
| |
| /* This routine will find out how many slots are in the chassis, so that |
| * the slot numbers for rxe100 would start from 1, and not from 7, or 6 etc |
| */ |
| static u8 calculate_first_slot (u8 slot_num) |
| { |
| u8 first_slot = 1; |
| struct list_head * list; |
| struct slot * slot_cur; |
| |
| list_for_each (list, &ibmphp_slot_head) { |
| slot_cur = list_entry (list, struct slot, ibm_slot_list); |
| if (slot_cur->ctrl) { |
| if ((slot_cur->ctrl->ctlr_type != 4) && (slot_cur->ctrl->ending_slot_num > first_slot) && (slot_num > slot_cur->ctrl->ending_slot_num)) |
| first_slot = slot_cur->ctrl->ending_slot_num; |
| } |
| } |
| return first_slot + 1; |
| |
| } |
| static char *create_file_name (struct slot * slot_cur) |
| { |
| struct opt_rio *opt_vg_ptr = NULL; |
| struct opt_rio_lo *opt_lo_ptr = NULL; |
| static char str[30]; |
| int which = 0; /* rxe = 1, chassis = 0 */ |
| u8 number = 1; /* either chassis or rxe # */ |
| u8 first_slot = 1; |
| u8 slot_num; |
| u8 flag = 0; |
| |
| if (!slot_cur) { |
| err ("Structure passed is empty\n"); |
| return NULL; |
| } |
| |
| slot_num = slot_cur->number; |
| |
| memset (str, 0, sizeof(str)); |
| |
| if (rio_table_ptr) { |
| if (rio_table_ptr->ver_num == 3) { |
| opt_vg_ptr = find_chassis_num (slot_num); |
| opt_lo_ptr = find_rxe_num (slot_num); |
| } |
| } |
| if (opt_vg_ptr) { |
| if (opt_lo_ptr) { |
| if ((slot_num - opt_vg_ptr->first_slot_num) > (slot_num - opt_lo_ptr->first_slot_num)) { |
| number = opt_lo_ptr->chassis_num; |
| first_slot = opt_lo_ptr->first_slot_num; |
| which = 1; /* it is RXE */ |
| } else { |
| first_slot = opt_vg_ptr->first_slot_num; |
| number = opt_vg_ptr->chassis_num; |
| which = 0; |
| } |
| } else { |
| first_slot = opt_vg_ptr->first_slot_num; |
| number = opt_vg_ptr->chassis_num; |
| which = 0; |
| } |
| ++flag; |
| } else if (opt_lo_ptr) { |
| number = opt_lo_ptr->chassis_num; |
| first_slot = opt_lo_ptr->first_slot_num; |
| which = 1; |
| ++flag; |
| } else if (rio_table_ptr) { |
| if (rio_table_ptr->ver_num == 3) { |
| /* if both NULL and we DO have correct RIO table in BIOS */ |
| return NULL; |
| } |
| } |
| if (!flag) { |
| if (slot_cur->ctrl->ctlr_type == 4) { |
| first_slot = calculate_first_slot (slot_num); |
| which = 1; |
| } else { |
| which = 0; |
| } |
| } |
| |
| sprintf(str, "%s%dslot%d", |
| which == 0 ? "chassis" : "rxe", |
| number, slot_num - first_slot + 1); |
| return str; |
| } |
| |
| static int fillslotinfo(struct hotplug_slot *hotplug_slot) |
| { |
| struct slot *slot; |
| int rc = 0; |
| |
| if (!hotplug_slot || !hotplug_slot->private) |
| return -EINVAL; |
| |
| slot = hotplug_slot->private; |
| rc = ibmphp_hpc_readslot(slot, READ_ALLSTAT, NULL); |
| if (rc) |
| return rc; |
| |
| // power - enabled:1 not:0 |
| hotplug_slot->info->power_status = SLOT_POWER(slot->status); |
| |
| // attention - off:0, on:1, blinking:2 |
| hotplug_slot->info->attention_status = SLOT_ATTN(slot->status, slot->ext_status); |
| |
| // latch - open:1 closed:0 |
| hotplug_slot->info->latch_status = SLOT_LATCH(slot->status); |
| |
| // pci board - present:1 not:0 |
| if (SLOT_PRESENT (slot->status)) |
| hotplug_slot->info->adapter_status = 1; |
| else |
| hotplug_slot->info->adapter_status = 0; |
| /* |
| if (slot->bus_on->supported_bus_mode |
| && (slot->bus_on->supported_speed == BUS_SPEED_66)) |
| hotplug_slot->info->max_bus_speed_status = BUS_SPEED_66PCIX; |
| else |
| hotplug_slot->info->max_bus_speed_status = slot->bus_on->supported_speed; |
| */ |
| |
| return rc; |
| } |
| |
| static void release_slot(struct hotplug_slot *hotplug_slot) |
| { |
| struct slot *slot; |
| |
| if (!hotplug_slot || !hotplug_slot->private) |
| return; |
| |
| slot = hotplug_slot->private; |
| kfree(slot->hotplug_slot->info); |
| kfree(slot->hotplug_slot->name); |
| kfree(slot->hotplug_slot); |
| slot->ctrl = NULL; |
| slot->bus_on = NULL; |
| |
| /* we don't want to actually remove the resources, since free_resources will do just that */ |
| ibmphp_unconfigure_card(&slot, -1); |
| |
| kfree (slot); |
| } |
| |
| static struct pci_driver ibmphp_driver; |
| |
| /* |
| * map info (ctlr-id, slot count, slot#.. bus count, bus#, ctlr type...) of |
| * each hpc from physical address to a list of hot plug controllers based on |
| * hpc descriptors. |
| */ |
| static int __init ebda_rsrc_controller (void) |
| { |
| u16 addr, addr_slot, addr_bus; |
| u8 ctlr_id, temp, bus_index; |
| u16 ctlr, slot, bus; |
| u16 slot_num, bus_num, index; |
| struct hotplug_slot *hp_slot_ptr; |
| struct controller *hpc_ptr; |
| struct ebda_hpc_bus *bus_ptr; |
| struct ebda_hpc_slot *slot_ptr; |
| struct bus_info *bus_info_ptr1, *bus_info_ptr2; |
| int rc; |
| struct slot *tmp_slot; |
| struct list_head *list; |
| |
| addr = hpc_list_ptr->phys_addr; |
| for (ctlr = 0; ctlr < hpc_list_ptr->num_ctlrs; ctlr++) { |
| bus_index = 1; |
| ctlr_id = readb (io_mem + addr); |
| addr += 1; |
| slot_num = readb (io_mem + addr); |
| |
| addr += 1; |
| addr_slot = addr; /* offset of slot structure */ |
| addr += (slot_num * 4); |
| |
| bus_num = readb (io_mem + addr); |
| |
| addr += 1; |
| addr_bus = addr; /* offset of bus */ |
| addr += (bus_num * 9); /* offset of ctlr_type */ |
| temp = readb (io_mem + addr); |
| |
| addr += 1; |
| /* init hpc structure */ |
| hpc_ptr = alloc_ebda_hpc (slot_num, bus_num); |
| if (!hpc_ptr ) { |
| rc = -ENOMEM; |
| goto error_no_hpc; |
| } |
| hpc_ptr->ctlr_id = ctlr_id; |
| hpc_ptr->ctlr_relative_id = ctlr; |
| hpc_ptr->slot_count = slot_num; |
| hpc_ptr->bus_count = bus_num; |
| debug ("now enter ctlr data struture ---\n"); |
| debug ("ctlr id: %x\n", ctlr_id); |
| debug ("ctlr_relative_id: %x\n", hpc_ptr->ctlr_relative_id); |
| debug ("count of slots controlled by this ctlr: %x\n", slot_num); |
| debug ("count of buses controlled by this ctlr: %x\n", bus_num); |
| |
| /* init slot structure, fetch slot, bus, cap... */ |
| slot_ptr = hpc_ptr->slots; |
| for (slot = 0; slot < slot_num; slot++) { |
| slot_ptr->slot_num = readb (io_mem + addr_slot); |
| slot_ptr->slot_bus_num = readb (io_mem + addr_slot + slot_num); |
| slot_ptr->ctl_index = readb (io_mem + addr_slot + 2*slot_num); |
| slot_ptr->slot_cap = readb (io_mem + addr_slot + 3*slot_num); |
| |
| // create bus_info lined list --- if only one slot per bus: slot_min = slot_max |
| |
| bus_info_ptr2 = ibmphp_find_same_bus_num (slot_ptr->slot_bus_num); |
| if (!bus_info_ptr2) { |
| bus_info_ptr1 = kzalloc(sizeof(struct bus_info), GFP_KERNEL); |
| if (!bus_info_ptr1) { |
| rc = -ENOMEM; |
| goto error_no_hp_slot; |
| } |
| bus_info_ptr1->slot_min = slot_ptr->slot_num; |
| bus_info_ptr1->slot_max = slot_ptr->slot_num; |
| bus_info_ptr1->slot_count += 1; |
| bus_info_ptr1->busno = slot_ptr->slot_bus_num; |
| bus_info_ptr1->index = bus_index++; |
| bus_info_ptr1->current_speed = 0xff; |
| bus_info_ptr1->current_bus_mode = 0xff; |
| |
| bus_info_ptr1->controller_id = hpc_ptr->ctlr_id; |
| |
| list_add_tail (&bus_info_ptr1->bus_info_list, &bus_info_head); |
| |
| } else { |
| bus_info_ptr2->slot_min = min (bus_info_ptr2->slot_min, slot_ptr->slot_num); |
| bus_info_ptr2->slot_max = max (bus_info_ptr2->slot_max, slot_ptr->slot_num); |
| bus_info_ptr2->slot_count += 1; |
| |
| } |
| |
| // end of creating the bus_info linked list |
| |
| slot_ptr++; |
| addr_slot += 1; |
| } |
| |
| /* init bus structure */ |
| bus_ptr = hpc_ptr->buses; |
| for (bus = 0; bus < bus_num; bus++) { |
| bus_ptr->bus_num = readb (io_mem + addr_bus + bus); |
| bus_ptr->slots_at_33_conv = readb (io_mem + addr_bus + bus_num + 8 * bus); |
| bus_ptr->slots_at_66_conv = readb (io_mem + addr_bus + bus_num + 8 * bus + 1); |
| |
| bus_ptr->slots_at_66_pcix = readb (io_mem + addr_bus + bus_num + 8 * bus + 2); |
| |
| bus_ptr->slots_at_100_pcix = readb (io_mem + addr_bus + bus_num + 8 * bus + 3); |
| |
| bus_ptr->slots_at_133_pcix = readb (io_mem + addr_bus + bus_num + 8 * bus + 4); |
| |
| bus_info_ptr2 = ibmphp_find_same_bus_num (bus_ptr->bus_num); |
| if (bus_info_ptr2) { |
| bus_info_ptr2->slots_at_33_conv = bus_ptr->slots_at_33_conv; |
| bus_info_ptr2->slots_at_66_conv = bus_ptr->slots_at_66_conv; |
| bus_info_ptr2->slots_at_66_pcix = bus_ptr->slots_at_66_pcix; |
| bus_info_ptr2->slots_at_100_pcix = bus_ptr->slots_at_100_pcix; |
| bus_info_ptr2->slots_at_133_pcix = bus_ptr->slots_at_133_pcix; |
| } |
| bus_ptr++; |
| } |
| |
| hpc_ptr->ctlr_type = temp; |
| |
| switch (hpc_ptr->ctlr_type) { |
| case 1: |
| hpc_ptr->u.pci_ctlr.bus = readb (io_mem + addr); |
| hpc_ptr->u.pci_ctlr.dev_fun = readb (io_mem + addr + 1); |
| hpc_ptr->irq = readb (io_mem + addr + 2); |
| addr += 3; |
| debug ("ctrl bus = %x, ctlr devfun = %x, irq = %x\n", |
| hpc_ptr->u.pci_ctlr.bus, |
| hpc_ptr->u.pci_ctlr.dev_fun, hpc_ptr->irq); |
| break; |
| |
| case 0: |
| hpc_ptr->u.isa_ctlr.io_start = readw (io_mem + addr); |
| hpc_ptr->u.isa_ctlr.io_end = readw (io_mem + addr + 2); |
| if (!request_region (hpc_ptr->u.isa_ctlr.io_start, |
| (hpc_ptr->u.isa_ctlr.io_end - hpc_ptr->u.isa_ctlr.io_start + 1), |
| "ibmphp")) { |
| rc = -ENODEV; |
| goto error_no_hp_slot; |
| } |
| hpc_ptr->irq = readb (io_mem + addr + 4); |
| addr += 5; |
| break; |
| |
| case 2: |
| case 4: |
| hpc_ptr->u.wpeg_ctlr.wpegbbar = readl (io_mem + addr); |
| hpc_ptr->u.wpeg_ctlr.i2c_addr = readb (io_mem + addr + 4); |
| hpc_ptr->irq = readb (io_mem + addr + 5); |
| addr += 6; |
| break; |
| default: |
| rc = -ENODEV; |
| goto error_no_hp_slot; |
| } |
| |
| //reorganize chassis' linked list |
| combine_wpg_for_chassis (); |
| combine_wpg_for_expansion (); |
| hpc_ptr->revision = 0xff; |
| hpc_ptr->options = 0xff; |
| hpc_ptr->starting_slot_num = hpc_ptr->slots[0].slot_num; |
| hpc_ptr->ending_slot_num = hpc_ptr->slots[slot_num-1].slot_num; |
| |
| // register slots with hpc core as well as create linked list of ibm slot |
| for (index = 0; index < hpc_ptr->slot_count; index++) { |
| |
| hp_slot_ptr = kzalloc(sizeof(*hp_slot_ptr), GFP_KERNEL); |
| if (!hp_slot_ptr) { |
| rc = -ENOMEM; |
| goto error_no_hp_slot; |
| } |
| |
| hp_slot_ptr->info = kzalloc(sizeof(struct hotplug_slot_info), GFP_KERNEL); |
| if (!hp_slot_ptr->info) { |
| rc = -ENOMEM; |
| goto error_no_hp_info; |
| } |
| |
| hp_slot_ptr->name = kmalloc(30, GFP_KERNEL); |
| if (!hp_slot_ptr->name) { |
| rc = -ENOMEM; |
| goto error_no_hp_name; |
| } |
| |
| tmp_slot = kzalloc(sizeof(*tmp_slot), GFP_KERNEL); |
| if (!tmp_slot) { |
| rc = -ENOMEM; |
| goto error_no_slot; |
| } |
| |
| tmp_slot->flag = 1; |
| |
| tmp_slot->capabilities = hpc_ptr->slots[index].slot_cap; |
| if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_133_MAX) == EBDA_SLOT_133_MAX) |
| tmp_slot->supported_speed = 3; |
| else if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_100_MAX) == EBDA_SLOT_100_MAX) |
| tmp_slot->supported_speed = 2; |
| else if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_66_MAX) == EBDA_SLOT_66_MAX) |
| tmp_slot->supported_speed = 1; |
| |
| if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_PCIX_CAP) == EBDA_SLOT_PCIX_CAP) |
| tmp_slot->supported_bus_mode = 1; |
| else |
| tmp_slot->supported_bus_mode = 0; |
| |
| |
| tmp_slot->bus = hpc_ptr->slots[index].slot_bus_num; |
| |
| bus_info_ptr1 = ibmphp_find_same_bus_num (hpc_ptr->slots[index].slot_bus_num); |
| if (!bus_info_ptr1) { |
| kfree(tmp_slot); |
| rc = -ENODEV; |
| goto error; |
| } |
| tmp_slot->bus_on = bus_info_ptr1; |
| bus_info_ptr1 = NULL; |
| tmp_slot->ctrl = hpc_ptr; |
| |
| tmp_slot->ctlr_index = hpc_ptr->slots[index].ctl_index; |
| tmp_slot->number = hpc_ptr->slots[index].slot_num; |
| tmp_slot->hotplug_slot = hp_slot_ptr; |
| |
| hp_slot_ptr->private = tmp_slot; |
| hp_slot_ptr->release = release_slot; |
| |
| rc = fillslotinfo(hp_slot_ptr); |
| if (rc) |
| goto error; |
| |
| rc = ibmphp_init_devno ((struct slot **) &hp_slot_ptr->private); |
| if (rc) |
| goto error; |
| hp_slot_ptr->ops = &ibmphp_hotplug_slot_ops; |
| |
| // end of registering ibm slot with hotplug core |
| |
| list_add (& ((struct slot *)(hp_slot_ptr->private))->ibm_slot_list, &ibmphp_slot_head); |
| } |
| |
| print_bus_info (); |
| list_add (&hpc_ptr->ebda_hpc_list, &ebda_hpc_head ); |
| |
| } /* each hpc */ |
| |
| list_for_each (list, &ibmphp_slot_head) { |
| tmp_slot = list_entry (list, struct slot, ibm_slot_list); |
| |
| snprintf (tmp_slot->hotplug_slot->name, 30, "%s", create_file_name (tmp_slot)); |
| pci_hp_register (tmp_slot->hotplug_slot); |
| } |
| |
| print_ebda_hpc (); |
| print_ibm_slot (); |
| return 0; |
| |
| error: |
| kfree (hp_slot_ptr->private); |
| error_no_slot: |
| kfree (hp_slot_ptr->name); |
| error_no_hp_name: |
| kfree (hp_slot_ptr->info); |
| error_no_hp_info: |
| kfree (hp_slot_ptr); |
| error_no_hp_slot: |
| free_ebda_hpc (hpc_ptr); |
| error_no_hpc: |
| iounmap (io_mem); |
| return rc; |
| } |
| |
| /* |
| * map info (bus, devfun, start addr, end addr..) of i/o, memory, |
| * pfm from the physical addr to a list of resource. |
| */ |
| static int __init ebda_rsrc_rsrc (void) |
| { |
| u16 addr; |
| short rsrc; |
| u8 type, rsrc_type; |
| struct ebda_pci_rsrc *rsrc_ptr; |
| |
| addr = rsrc_list_ptr->phys_addr; |
| debug ("now entering rsrc land\n"); |
| debug ("offset of rsrc: %x\n", rsrc_list_ptr->phys_addr); |
| |
| for (rsrc = 0; rsrc < rsrc_list_ptr->num_entries; rsrc++) { |
| type = readb (io_mem + addr); |
| |
| addr += 1; |
| rsrc_type = type & EBDA_RSRC_TYPE_MASK; |
| |
| if (rsrc_type == EBDA_IO_RSRC_TYPE) { |
| rsrc_ptr = alloc_ebda_pci_rsrc (); |
| if (!rsrc_ptr) { |
| iounmap (io_mem); |
| return -ENOMEM; |
| } |
| rsrc_ptr->rsrc_type = type; |
| |
| rsrc_ptr->bus_num = readb (io_mem + addr); |
| rsrc_ptr->dev_fun = readb (io_mem + addr + 1); |
| rsrc_ptr->start_addr = readw (io_mem + addr + 2); |
| rsrc_ptr->end_addr = readw (io_mem + addr + 4); |
| addr += 6; |
| |
| debug ("rsrc from io type ----\n"); |
| debug ("rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n", |
| rsrc_ptr->rsrc_type, rsrc_ptr->bus_num, rsrc_ptr->dev_fun, rsrc_ptr->start_addr, rsrc_ptr->end_addr); |
| |
| list_add (&rsrc_ptr->ebda_pci_rsrc_list, &ibmphp_ebda_pci_rsrc_head); |
| } |
| |
| if (rsrc_type == EBDA_MEM_RSRC_TYPE || rsrc_type == EBDA_PFM_RSRC_TYPE) { |
| rsrc_ptr = alloc_ebda_pci_rsrc (); |
| if (!rsrc_ptr ) { |
| iounmap (io_mem); |
| return -ENOMEM; |
| } |
| rsrc_ptr->rsrc_type = type; |
| |
| rsrc_ptr->bus_num = readb (io_mem + addr); |
| rsrc_ptr->dev_fun = readb (io_mem + addr + 1); |
| rsrc_ptr->start_addr = readl (io_mem + addr + 2); |
| rsrc_ptr->end_addr = readl (io_mem + addr + 6); |
| addr += 10; |
| |
| debug ("rsrc from mem or pfm ---\n"); |
| debug ("rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n", |
| rsrc_ptr->rsrc_type, rsrc_ptr->bus_num, rsrc_ptr->dev_fun, rsrc_ptr->start_addr, rsrc_ptr->end_addr); |
| |
| list_add (&rsrc_ptr->ebda_pci_rsrc_list, &ibmphp_ebda_pci_rsrc_head); |
| } |
| } |
| kfree (rsrc_list_ptr); |
| rsrc_list_ptr = NULL; |
| print_ebda_pci_rsrc (); |
| return 0; |
| } |
| |
| u16 ibmphp_get_total_controllers (void) |
| { |
| return hpc_list_ptr->num_ctlrs; |
| } |
| |
| struct slot *ibmphp_get_slot_from_physical_num (u8 physical_num) |
| { |
| struct slot *slot; |
| struct list_head *list; |
| |
| list_for_each (list, &ibmphp_slot_head) { |
| slot = list_entry (list, struct slot, ibm_slot_list); |
| if (slot->number == physical_num) |
| return slot; |
| } |
| return NULL; |
| } |
| |
| /* To find: |
| * - the smallest slot number |
| * - the largest slot number |
| * - the total number of the slots based on each bus |
| * (if only one slot per bus slot_min = slot_max ) |
| */ |
| struct bus_info *ibmphp_find_same_bus_num (u32 num) |
| { |
| struct bus_info *ptr; |
| struct list_head *ptr1; |
| |
| list_for_each (ptr1, &bus_info_head) { |
| ptr = list_entry (ptr1, struct bus_info, bus_info_list); |
| if (ptr->busno == num) |
| return ptr; |
| } |
| return NULL; |
| } |
| |
| /* Finding relative bus number, in order to map corresponding |
| * bus register |
| */ |
| int ibmphp_get_bus_index (u8 num) |
| { |
| struct bus_info *ptr; |
| struct list_head *ptr1; |
| |
| list_for_each (ptr1, &bus_info_head) { |
| ptr = list_entry (ptr1, struct bus_info, bus_info_list); |
| if (ptr->busno == num) |
| return ptr->index; |
| } |
| return -ENODEV; |
| } |
| |
| void ibmphp_free_bus_info_queue (void) |
| { |
| struct bus_info *bus_info; |
| struct list_head *list; |
| struct list_head *next; |
| |
| list_for_each_safe (list, next, &bus_info_head ) { |
| bus_info = list_entry (list, struct bus_info, bus_info_list); |
| kfree (bus_info); |
| } |
| } |
| |
| void ibmphp_free_ebda_hpc_queue (void) |
| { |
| struct controller *controller = NULL; |
| struct list_head *list; |
| struct list_head *next; |
| int pci_flag = 0; |
| |
| list_for_each_safe (list, next, &ebda_hpc_head) { |
| controller = list_entry (list, struct controller, ebda_hpc_list); |
| if (controller->ctlr_type == 0) |
| release_region (controller->u.isa_ctlr.io_start, (controller->u.isa_ctlr.io_end - controller->u.isa_ctlr.io_start + 1)); |
| else if ((controller->ctlr_type == 1) && (!pci_flag)) { |
| ++pci_flag; |
| pci_unregister_driver (&ibmphp_driver); |
| } |
| free_ebda_hpc (controller); |
| } |
| } |
| |
| void ibmphp_free_ebda_pci_rsrc_queue (void) |
| { |
| struct ebda_pci_rsrc *resource; |
| struct list_head *list; |
| struct list_head *next; |
| |
| list_for_each_safe (list, next, &ibmphp_ebda_pci_rsrc_head) { |
| resource = list_entry (list, struct ebda_pci_rsrc, ebda_pci_rsrc_list); |
| kfree (resource); |
| resource = NULL; |
| } |
| } |
| |
| static struct pci_device_id id_table[] = { |
| { |
| .vendor = PCI_VENDOR_ID_IBM, |
| .device = HPC_DEVICE_ID, |
| .subvendor = PCI_VENDOR_ID_IBM, |
| .subdevice = HPC_SUBSYSTEM_ID, |
| .class = ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00), |
| }, {} |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, id_table); |
| |
| static int ibmphp_probe (struct pci_dev *, const struct pci_device_id *); |
| static struct pci_driver ibmphp_driver = { |
| .name = "ibmphp", |
| .id_table = id_table, |
| .probe = ibmphp_probe, |
| }; |
| |
| int ibmphp_register_pci (void) |
| { |
| struct controller *ctrl; |
| struct list_head *tmp; |
| int rc = 0; |
| |
| list_for_each (tmp, &ebda_hpc_head) { |
| ctrl = list_entry (tmp, struct controller, ebda_hpc_list); |
| if (ctrl->ctlr_type == 1) { |
| rc = pci_register_driver(&ibmphp_driver); |
| break; |
| } |
| } |
| return rc; |
| } |
| static int ibmphp_probe (struct pci_dev * dev, const struct pci_device_id *ids) |
| { |
| struct controller *ctrl; |
| struct list_head *tmp; |
| |
| debug ("inside ibmphp_probe\n"); |
| |
| list_for_each (tmp, &ebda_hpc_head) { |
| ctrl = list_entry (tmp, struct controller, ebda_hpc_list); |
| if (ctrl->ctlr_type == 1) { |
| if ((dev->devfn == ctrl->u.pci_ctlr.dev_fun) && (dev->bus->number == ctrl->u.pci_ctlr.bus)) { |
| ctrl->ctrl_dev = dev; |
| debug ("found device!!!\n"); |
| debug ("dev->device = %x, dev->subsystem_device = %x\n", dev->device, dev->subsystem_device); |
| return 0; |
| } |
| } |
| } |
| return -ENODEV; |
| } |
| |