Merge branch 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits)
[ARM] 3683/2: ARM: Convert at91rm9200 to generic irq handling
[ARM] 3682/2: ARM: Convert ixp4xx to generic irq handling
[ARM] 3702/1: ARM: Convert ixp23xx to generic irq handling
[ARM] 3701/1: ARM: Convert plat-omap to generic irq handling
[ARM] 3700/1: ARM: Convert lh7a40x to generic irq handling
[ARM] 3699/1: ARM: Convert s3c2410 to generic irq handling
[ARM] 3698/1: ARM: Convert sa1100 to generic irq handling
[ARM] 3697/1: ARM: Convert shark to generic irq handling
[ARM] 3696/1: ARM: Convert clps711x to generic irq handling
[ARM] 3694/1: ARM: Convert ecard driver to generic irq handling
[ARM] 3693/1: ARM: Convert omap1 to generic irq handling
[ARM] 3691/1: ARM: Convert imx to generic irq handling
[ARM] 3688/1: ARM: Convert clps7500 to generic irq handling
[ARM] 3687/1: ARM: Convert integrator to generic irq handling
[ARM] 3685/1: ARM: Convert pxa to generic irq handling
[ARM] 3684/1: ARM: Convert l7200 to generic irq handling
[ARM] 3681/1: ARM: Convert ixp2000 to generic irq handling
[ARM] 3680/1: ARM: Convert footbridge to generic irq handling
[ARM] 3695/1: ARM drivers/pcmcia: Fixup includes
[ARM] 3689/1: ARM drivers/input/touchscreen: Fixup includes
...
Manual conflict resolved in kernel/irq/handle.c (butt-ugly ARM tickless
code).
diff --git a/Documentation/DocBook/videobook.tmpl b/Documentation/DocBook/videobook.tmpl
index fdff984..b629da3 100644
--- a/Documentation/DocBook/videobook.tmpl
+++ b/Documentation/DocBook/videobook.tmpl
@@ -976,7 +976,7 @@
<title>Interrupt Handling</title>
<para>
Our example handler is for an ISA bus device. If it was PCI you would be
- able to share the interrupt and would have set SA_SHIRQ to indicate a
+ able to share the interrupt and would have set IRQF_SHARED to indicate a
shared IRQ. We pass the device pointer as the interrupt routine argument. We
don't need to since we only support one card but doing this will make it
easier to upgrade the driver for multiple devices in the future.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 1cbbb8e..99f219a 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -257,3 +257,12 @@
Who: Ralf Baechle <ralf@linux-mips.org>
---------------------------
+
+What: Interrupt only SA_* flags
+When: Januar 2007
+Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
+ out of the signal namespace.
+
+Who: Thomas Gleixner <tglx@linutronix.de>
+
+---------------------------
diff --git a/Documentation/pci.txt b/Documentation/pci.txt
index 3242e5c..2b395e4 100644
--- a/Documentation/pci.txt
+++ b/Documentation/pci.txt
@@ -225,7 +225,7 @@
Use these for address resources that are not described by "normal" PCI
interfaces (e.g. BAR).
- All interrupt handlers should be registered with SA_SHIRQ and use the devid
+ All interrupt handlers should be registered with IRQF_SHARED and use the devid
to map IRQs to devices (remember that all PCI interrupts are shared).
diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt
index e165229..df7a02b 100644
--- a/Documentation/scsi/tmscsim.txt
+++ b/Documentation/scsi/tmscsim.txt
@@ -109,7 +109,7 @@
If you want to share the IRQ with another device and the driver refuses to
do so, you might succeed with changing the DC390_IRQ type in tmscsim.c to
-SA_SHIRQ | SA_INTERRUPT.
+IRQF_SHARED | IRQF_DISABLED.
3.Features
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index bb18115..69866d5 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -1149,7 +1149,7 @@
}
chip->port = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_mychip_interrupt,
- SA_INTERRUPT|SA_SHIRQ, "My Chip", chip)) {
+ IRQF_DISABLED|IRQF_SHARED, "My Chip", chip)) {
printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
snd_mychip_free(chip);
return -EBUSY;
@@ -1323,7 +1323,7 @@
<programlisting>
<![CDATA[
if (request_irq(pci->irq, snd_mychip_interrupt,
- SA_INTERRUPT|SA_SHIRQ, "My Chip", chip)) {
+ IRQF_DISABLED|IRQF_SHARED, "My Chip", chip)) {
printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
snd_mychip_free(chip);
return -EBUSY;
@@ -1342,7 +1342,7 @@
<para>
On the PCI bus, the interrupts can be shared. Thus,
- <constant>SA_SHIRQ</constant> is given as the interrupt flag of
+ <constant>IRQF_SHARED</constant> is given as the interrupt flag of
<function>request_irq()</function>.
</para>
diff --git a/Makefile b/Makefile
index e9560c6f..4dcf25d 100644
--- a/Makefile
+++ b/Makefile
@@ -41,8 +41,9 @@
KBUILD_VERBOSE = 0
endif
-# Call sparse as part of compilation of C files
-# Use 'make C=1' to enable sparse checking
+# Call checker as part of compilation of C files
+# Use 'make C=1' to enable checking (sparse, by default)
+# Override with 'make C=1 CHECK=checker_executable CHECKFLAGS=....'
ifdef C
ifeq ("$(origin C)", "command line")
@@ -1060,8 +1061,8 @@
@echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
@echo ' make O=dir [targets] Locate all output files in "dir", including .config'
- @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse)'
- @echo ' make C=2 [targets] Force check of all c source with $$CHECK (sparse)'
+ @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
+ @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
@echo ''
@echo 'Execute "make" or "make all" to build all targets marked with [*] '
@echo 'For further info see the ./README file'
@@ -1352,7 +1353,7 @@
a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \
$(NOSTDINC_FLAGS) $(CPPFLAGS) \
- $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
+ $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
quiet_cmd_as_o_S = AS $@
cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index bd193ff..729c475 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -94,12 +94,12 @@
#endif
seq_printf(p, " %14s", irq_desc[irq].chip->typename);
seq_printf(p, " %c%s",
- (action->flags & SA_INTERRUPT)?'+':' ',
+ (action->flags & IRQF_DISABLED)?'+':' ',
action->name);
for (action=action->next; action; action = action->next) {
seq_printf(p, ", %c%s",
- (action->flags & SA_INTERRUPT)?'+':' ',
+ (action->flags & IRQF_DISABLED)?'+':' ',
action->name);
}
diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
index ffa4ac5..ddf5cf8 100644
--- a/arch/alpha/kernel/irq_alpha.c
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -214,7 +214,7 @@
struct irqaction timer_irqaction = {
.handler = timer_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "timer",
};
diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c
index 0148e09..4ac2b32 100644
--- a/arch/alpha/kernel/sys_jensen.c
+++ b/arch/alpha/kernel/sys_jensen.c
@@ -74,7 +74,7 @@
* the IPL from being dropped during handler processing.
*/
if (irq_desc[irq].action)
- irq_desc[irq].action->flags |= SA_INTERRUPT;
+ irq_desc[irq].action->flags |= IRQF_DISABLED;
return 0;
}
diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c
index a8bfc8c..302aab3 100644
--- a/arch/alpha/kernel/sys_titan.c
+++ b/arch/alpha/kernel/sys_titan.c
@@ -279,15 +279,15 @@
* all reported to the kernel as machine checks, so the handler
* is a nop so it can be called to count the individual events.
*/
- request_irq(63+16, titan_intr_nop, SA_INTERRUPT,
+ request_irq(63+16, titan_intr_nop, IRQF_DISABLED,
"CChip Error", NULL);
- request_irq(62+16, titan_intr_nop, SA_INTERRUPT,
+ request_irq(62+16, titan_intr_nop, IRQF_DISABLED,
"PChip 0 H_Error", NULL);
- request_irq(61+16, titan_intr_nop, SA_INTERRUPT,
+ request_irq(61+16, titan_intr_nop, IRQF_DISABLED,
"PChip 1 H_Error", NULL);
- request_irq(60+16, titan_intr_nop, SA_INTERRUPT,
+ request_irq(60+16, titan_intr_nop, IRQF_DISABLED,
"PChip 0 C_Error", NULL);
- request_irq(59+16, titan_intr_nop, SA_INTERRUPT,
+ request_irq(59+16, titan_intr_nop, IRQF_DISABLED,
"PChip 1 C_Error", NULL);
/*
@@ -348,9 +348,9 @@
* Hook a couple of extra err interrupts that the
* common titan code won't.
*/
- request_irq(53+16, titan_intr_nop, SA_INTERRUPT,
+ request_irq(53+16, titan_intr_nop, IRQF_DISABLED,
"NMI", NULL);
- request_irq(50+16, titan_intr_nop, SA_INTERRUPT,
+ request_irq(50+16, titan_intr_nop, IRQF_DISABLED,
"Temperature Warning", NULL);
/*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 531661a..f81a623 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -133,11 +133,11 @@
help
This enables support for ARM Ltd Versatile board.
-config ARCH_AT91RM9200
- bool "Atmel AT91RM9200"
+config ARCH_AT91
+ bool "Atmel AT91"
help
- Say Y here if you intend to run this kernel on an Atmel
- AT91RM9200-based board.
+ This enables support for systems based on the Atmel AT91RM9200
+ and AT91SAM9xxx processors.
config ARCH_CLPS7500
bool "Cirrus CL-PS7500FE"
@@ -559,7 +559,7 @@
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91RM9200
+ ARCH_AT91RM9200 || MACH_TRIZEPS4
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
@@ -690,7 +690,7 @@
endmenu
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP)
menu "CPU Frequency scaling"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a3bbaaf..3345c6d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -114,7 +114,7 @@
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_REALVIEW) := realview
- machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
+ machine-$(CONFIG_ARCH_AT91) := at91rm9200
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_NETX) := netx
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index f7b5c6d..14a9ff9 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -447,8 +447,11 @@
mov r1, #-1
mcr p15, 0, r3, c2, c0, 0 @ load page table pointer
mcr p15, 0, r1, c3, c0, 0 @ load domain access control
- mcr p15, 0, r0, c1, c0, 0 @ load control register
- mov pc, lr
+ b 1f
+ .align 5 @ cache line aligned
+1: mcr p15, 0, r0, c1, c0, 0 @ load control register
+ mrc p15, 0, r0, c1, c0, 0 @ and read it back to
+ sub pc, lr, r0, lsr #32 @ properly flush pipeline
/*
* All code following this line is relocatable. It is relocated by
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 9e1c1cc..4f3d8d3 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -103,6 +103,7 @@
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index 6e0805a..08b5dc3 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -103,6 +103,7 @@
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index 69c39e0..bee7813 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -105,6 +105,7 @@
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig
index 5ccd29a..8a075c8 100644
--- a/arch/arm/configs/carmeva_defconfig
+++ b/arch/arm/configs/carmeva_defconfig
@@ -82,6 +82,7 @@
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index 94bd993..3594155 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -103,6 +103,7 @@
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 1519124..640d70c 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -103,6 +103,7 @@
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index 51ded20..1db633e 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -105,6 +105,7 @@
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index fee4f56..45396e0 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -80,6 +80,7 @@
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index ee3ecbd..05adb0b 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,19 +1,20 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Wed Nov 9 18:53:40 2005
+# Linux kernel version: 2.6.17
+# Thu Jun 29 15:25:18 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -29,26 +30,26 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -56,7 +57,6 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
@@ -64,6 +64,7 @@
#
# Block layer
#
+# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
@@ -81,16 +82,26 @@
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91RM9200 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
@@ -98,11 +109,6 @@
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
#
# TI OMAP Implementations
@@ -141,6 +147,7 @@
CONFIG_MACH_OMAP_H2=y
# CONFIG_MACH_OMAP_H3 is not set
# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
# CONFIG_MACH_OMAP_GENERIC is not set
#
@@ -177,7 +184,6 @@
#
# Bus support
#
-CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -189,6 +195,8 @@
#
CONFIG_PREEMPT=y
CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -249,6 +257,8 @@
# Power management options
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
# CONFIG_APM is not set
#
@@ -259,9 +269,12 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -278,12 +291,18 @@
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
@@ -295,6 +314,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -312,7 +336,6 @@
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
@@ -333,6 +356,12 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
@@ -526,6 +555,7 @@
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -534,6 +564,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -559,8 +590,8 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -572,6 +603,7 @@
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
@@ -580,10 +612,22 @@
# CONFIG_I2C is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -591,13 +635,23 @@
#
#
-# Multimedia Capabilities Port drivers
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -607,11 +661,13 @@
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
@@ -635,7 +691,6 @@
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
-# CONFIG_FONT_RL is not set
#
# Logo configuration
@@ -660,16 +715,15 @@
# Open Sound System
#
CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS_DRIVER is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
#
@@ -680,17 +734,6 @@
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
#
# MMC/SD Card support
@@ -698,20 +741,27 @@
# CONFIG_MMC is not set
#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
@@ -741,7 +791,7 @@
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -843,10 +893,13 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
# CONFIG_DEBUG_USER is not set
#
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 5401c01..2b4a63b 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -85,6 +85,7 @@
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
new file mode 100644
index 0000000..a6698dc
--- /dev/null
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -0,0 +1,1579 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Sat Jun 24 22:45:14 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_MACH_TRIZEPS4=y
+CONFIG_MACH_TRIZEPS4_CONXS=y
+# CONFIG_MACH_TRIZEPS4_ANY is not set
+CONFIG_PXA27x=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=m
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200n8"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+CONFIG_IP_NF_QUEUE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_PXA_FICP is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=y
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_TRIZEPS4 is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=y
+CONFIG_MTD_DOCPROBE=y
+CONFIG_MTD_DOCECC=y
+# CONFIG_MTD_DOCPROBE_ADVANCED is not set
+CONFIG_MTD_DOCPROBE_ADDRESS=0
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_DISKONCHIP=y
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_IDE_PXA_CF=y
+CONFIG_IDE_ARM=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+CONFIG_AIRO_CS=m
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=640
+CONFIG_INPUT_TSDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_SERIAL=y
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SA1100_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+CONFIG_I2C_PXA_SLAVE=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=m
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+CONFIG_UCB1400=y
+CONFIG_UCB1400_TS=y
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=y
+CONFIG_SND_PXA2XX_AC97=y
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+CONFIG_USB_TOUCHSCREEN=m
+# CONFIG_USB_TOUCHSCREEN_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN_PANJIT is not set
+# CONFIG_USB_TOUCHSCREEN_3M is not set
+# CONFIG_USB_TOUCHSCREEN_ITM is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_DUMMY_HCD=y
+CONFIG_USB_DUMMY_HCD=y
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS_FS=y
+CONFIG_JFFS_FS_VERBOSE=0
+CONFIG_JFFS_PROC_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_SECLVL is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 7cffbae..f0c0cdb 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -25,7 +25,7 @@
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
-obj-$(CONFIG_IWMMXT) += iwmmxt.o
+obj-$(CONFIG_IWMMXT) += iwmmxt.o iwmmxt-notifier.o
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
ifneq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 447ede5..cc2d58d 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -105,6 +105,7 @@
BLANK();
DEFINE(PROC_INFO_SZ, sizeof(struct proc_info_list));
DEFINE(PROCINFO_INITFUNC, offsetof(struct proc_info_list, __cpu_flush));
- DEFINE(PROCINFO_MMUFLAGS, offsetof(struct proc_info_list, __cpu_mmu_flags));
+ DEFINE(PROCINFO_MM_MMUFLAGS, offsetof(struct proc_info_list, __cpu_mm_mmu_flags));
+ DEFINE(PROCINFO_IO_MMUFLAGS, offsetof(struct proc_info_list, __cpu_io_mmu_flags));
return 0;
}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 26f197a..7ea5f01 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -589,9 +589,7 @@
#ifdef CONFIG_MMU
mcr p15, 0, r6, c3, c0, 0 @ Set domain register
#endif
-#if defined(CONFIG_IWMMXT)
- bl iwmmxt_task_switch
-#elif defined(CONFIG_CPU_XSCALE)
+#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
add r4, r2, #TI_CPU_DOMAIN + 40 @ cpu_context_save->extra
ldmib r4, {r4, r5}
mar acc0, r4, r5
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 518b80c..2242f5f 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -220,7 +220,7 @@
teq r0, r6
bne 1b
- ldr r7, [r10, #PROCINFO_MMUFLAGS] @ mmuflags
+ ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
/*
* Create identity mapping for first MB of kernel to
@@ -271,8 +271,7 @@
#endif
#ifdef CONFIG_DEBUG_LL
- bic r7, r7, #0x0c @ turn off cacheable
- @ and bufferable bits
+ ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
/*
* Map in IO space for serial debugging.
* This allows debug messages to be output
diff --git a/arch/arm/kernel/iwmmxt-notifier.c b/arch/arm/kernel/iwmmxt-notifier.c
new file mode 100644
index 0000000..44a86c3
--- /dev/null
+++ b/arch/arm/kernel/iwmmxt-notifier.c
@@ -0,0 +1,64 @@
+/*
+ * linux/arch/arm/kernel/iwmmxt-notifier.c
+ *
+ * XScale iWMMXt (Concan) context switching and handling
+ *
+ * Initial code:
+ * Copyright (c) 2003, Intel Corporation
+ *
+ * Full lazy switching support, optimizations and more, by Nicolas Pitre
+ * Copyright (c) 2003-2004, MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/thread_notify.h>
+#include <asm/io.h>
+
+static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
+{
+ struct thread_info *thread = t;
+
+ switch (cmd) {
+ case THREAD_NOTIFY_FLUSH:
+ /*
+ * flush_thread() zeroes thread->fpstate, so no need
+ * to do anything here.
+ *
+ * FALLTHROUGH: Ensure we don't try to overwrite our newly
+ * initialised state information on the first fault.
+ */
+
+ case THREAD_NOTIFY_RELEASE:
+ iwmmxt_task_release(thread);
+ break;
+
+ case THREAD_NOTIFY_SWITCH:
+ iwmmxt_task_switch(thread);
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block iwmmxt_notifier_block = {
+ .notifier_call = iwmmxt_do,
+};
+
+static int __init iwmmxt_init(void)
+{
+ thread_register_notifier(&iwmmxt_notifier_block);
+
+ return 0;
+}
+
+late_initcall(iwmmxt_init);
diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S
index a3bae95..b63b528 100644
--- a/arch/arm/kernel/iwmmxt.S
+++ b/arch/arm/kernel/iwmmxt.S
@@ -271,30 +271,27 @@
/*
* Concan handling on task switch
*
- * r0 = previous task_struct pointer (must be preserved)
- * r1 = previous thread_info pointer
- * r2 = next thread_info pointer (must be preserved)
+ * r0 = next thread_info pointer
*
- * Called only from __switch_to with task preemption disabled.
- * No need to care about preserving r4 and above.
+ * Called only from the iwmmxt notifier with task preemption disabled.
*/
ENTRY(iwmmxt_task_switch)
- mrc p15, 0, r4, c15, c1, 0
- tst r4, #0x3 @ CP0 and CP1 accessible?
+ mrc p15, 0, r1, c15, c1, 0
+ tst r1, #0x3 @ CP0 and CP1 accessible?
bne 1f @ yes: block them for next task
- ldr r5, =concan_owner
- add r6, r2, #TI_IWMMXT_STATE @ get next task Concan save area
- ldr r5, [r5] @ get current Concan owner
- teq r5, r6 @ next task owns it?
+ ldr r2, =concan_owner
+ add r3, r0, #TI_IWMMXT_STATE @ get next task Concan save area
+ ldr r2, [r2] @ get current Concan owner
+ teq r2, r3 @ next task owns it?
movne pc, lr @ no: leave Concan disabled
-1: eor r4, r4, #3 @ flip Concan access
- mcr p15, 0, r4, c15, c1, 0
+1: eor r1, r1, #3 @ flip Concan access
+ mcr p15, 0, r1, c15, c1, 0
- mrc p15, 0, r4, c2, c0, 0
- sub pc, lr, r4, lsr #32 @ cpwait and return
+ mrc p15, 0, r1, c2, c0, 0
+ sub pc, lr, r1, lsr #32 @ cpwait and return
/*
* Remove Concan ownership of given task
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index c3258b7..3079535 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -352,9 +352,6 @@
memset(&thread->fpstate, 0, sizeof(union fp_state));
thread_notify(THREAD_NOTIFY_FLUSH, thread);
-#if defined(CONFIG_IWMMXT)
- iwmmxt_task_release(thread);
-#endif
}
void release_thread(struct task_struct *dead_task)
@@ -362,9 +359,6 @@
struct thread_info *thread = task_thread_info(dead_task);
thread_notify(THREAD_NOTIFY_RELEASE, thread);
-#if defined(CONFIG_IWMMXT)
- iwmmxt_task_release(thread);
-#endif
}
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 7447a19..7d6a516 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -344,9 +344,9 @@
cpu_cache = *list->cache;
#endif
- printk("CPU: %s [%08x] revision %d (ARMv%s)\n",
+ printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08x\n",
cpu_name, processor_id, (int)processor_id & 15,
- proc_arch[cpu_architecture()]);
+ proc_arch[cpu_architecture()], cr_alignment);
sprintf(system_utsname.machine, "%s%c", list->arch_name, ENDIANNESS);
sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91rm9200/Kconfig
index 70d402f..2f85e86 100644
--- a/arch/arm/mach-at91rm9200/Kconfig
+++ b/arch/arm/mach-at91rm9200/Kconfig
@@ -1,6 +1,21 @@
-if ARCH_AT91RM9200
+if ARCH_AT91
-menu "AT91RM9200 Implementations"
+menu "Atmel AT91 System-on-Chip"
+
+comment "Atmel AT91 Processors"
+
+config ARCH_AT91RM9200
+ bool "AT91RM9200"
+
+config ARCH_AT91SAM9260
+ bool "AT91SAM9260"
+
+config ARCH_AT91SAM9261
+ bool "AT91SAM9261"
+
+# ----------------------------------------------------------
+
+if ARCH_AT91RM9200
comment "AT91RM9200 Board Type"
@@ -8,58 +23,87 @@
bool "Ajeco 1ARM Single Board Computer"
depends on ARCH_AT91RM9200
help
- Select this if you are using Ajeco's 1ARM Single Board Computer
+ Select this if you are using Ajeco's 1ARM Single Board Computer.
+ <http://www.ajeco.fi/products.htm>
config ARCH_AT91RM9200DK
bool "Atmel AT91RM9200-DK Development board"
depends on ARCH_AT91RM9200
help
- Select this if you are using Atmel's AT91RM9200-DK Development board
+ Select this if you are using Atmel's AT91RM9200-DK Development board.
+ (Discontinued)
+
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
depends on ARCH_AT91RM9200
help
- Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit
+ Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
config MACH_CSB337
- bool "Cogent CSB337 board"
+ bool "Cogent CSB337"
depends on ARCH_AT91RM9200
help
- Select this if you are using Cogent's CSB337 board
+ Select this if you are using Cogent's CSB337 board.
+ <http://www.cogcomp.com/csb_csb337.htm>
config MACH_CSB637
- bool "Cogent CSB637 board"
+ bool "Cogent CSB637"
depends on ARCH_AT91RM9200
help
- Select this if you are using Cogent's CSB637 board
+ Select this if you are using Cogent's CSB637 board.
+ <http://www.cogcomp.com/csb_csb637.htm>
config MACH_CARMEVA
- bool "Conitec's ARM&EVA"
+ bool "Conitec ARM&EVA"
depends on ARCH_AT91RM9200
help
- Select this if you are using Conitec's AT91RM9200-MCU-Module
-
-config MACH_KB9200
- bool "KwikByte's KB920x"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using KwikByte's KB920x board
+ Select this if you are using Conitec's AT91RM9200-MCU-Module.
+ <http://www.conitec.net/english/linuxboard.htm>
config MACH_ATEB9200
- bool "Embest's ATEB9200"
+ bool "Embest ATEB9200"
depends on ARCH_AT91RM9200
help
- Select this if you are using Embest's ATEB9200 board
+ Select this if you are using Embest's ATEB9200 board.
+ <http://www.embedinfo.com/english/product/ATEB9200.asp>
+
+config MACH_KB9200
+ bool "KwikByte KB920x"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using KwikByte's KB920x board.
+ <http://kwikbyte.com/KB9202_description_new.htm>
config MACH_KAFA
bool "Sperry-Sun KAFA board"
depends on ARCH_AT91RM9200
help
- Select this if you are using Sperry-Sun's KAFA board
+ Select this if you are using Sperry-Sun's KAFA board.
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9260
+
+comment "AT91SAM9260 Board Type"
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+endif
-comment "AT91RM9200 Feature Selections"
+# ----------------------------------------------------------
+
+comment "AT91 Feature Selections"
config AT91_PROGRAMMABLE_CLOCKS
bool "Programmable Clocks"
diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile
index 82db957..c174805 100644
--- a/arch/arm/mach-at91rm9200/Makefile
+++ b/arch/arm/mach-at91rm9200/Makefile
@@ -2,14 +2,19 @@
# Makefile for the linux kernel.
#
-obj-y := clock.o irq.o time.o gpio.o common.o devices.o
+obj-y := clock.o irq.o gpio.o devices.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_PM) += pm.o
-# Board-specific support
+# CPU-specific support
+obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_ARCH_AT91SAM9260) +=
+obj-$(CONFIG_ARCH_AT91SAM9261) +=
+
+# AT91RM9200 Board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
@@ -20,6 +25,10 @@
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
+# AT91SAM9260 board-specific support
+
+# AT91SAM9261 board-specific support
+
# LEDs support
led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
diff --git a/arch/arm/mach-at91rm9200/common.c b/arch/arm/mach-at91rm9200/at91rm9200.c
similarity index 98%
rename from arch/arm/mach-at91rm9200/common.c
rename to arch/arm/mach-at91rm9200/at91rm9200.c
index cc55f4c..7e1d072 100644
--- a/arch/arm/mach-at91rm9200/common.c
+++ b/arch/arm/mach-at91rm9200/at91rm9200.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-at91rm9200/common.c
+ * arch/arm/mach-at91rm9200/at91rm9200.c
*
* Copyright (C) 2005 SAN People
*
diff --git a/arch/arm/mach-at91rm9200/time.c b/arch/arm/mach-at91rm9200/at91rm9200_time.c
similarity index 98%
rename from arch/arm/mach-at91rm9200/time.c
rename to arch/arm/mach-at91rm9200/at91rm9200_time.c
index 1f080e6..0aa2265 100644
--- a/arch/arm/mach-at91rm9200/time.c
+++ b/arch/arm/mach-at91rm9200/at91rm9200_time.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/time.c
+ * linux/arch/arm/mach-at91rm9200/at91rm9200_time.c
*
* Copyright (C) 2003 SAN People
* Copyright (C) 2003 ATMEL
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index e15e4c5..f1b7400 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -9,12 +9,24 @@
comment "EP93xx Platforms"
+config MACH_EDB9302
+ bool "Support Cirrus Logic EDB9302"
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9302 Evaluation Board.
+
config MACH_EDB9315
bool "Support Cirrus Logic EDB9315"
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9315 Evaluation Board.
+config MACH_EDB9315A
+ bool "Support Cirrus Logic EDB9315A"
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9315A Evaluation Board.
+
config MACH_GESBC9312
bool "Support Glomation GESBC-9312-sx"
help
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index dfa7e2e..1f5a6b0 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -6,6 +6,8 @@
obj-n :=
obj- :=
+obj-$(CONFIG_MACH_EDB9302) += edb9302.o
obj-$(CONFIG_MACH_EDB9315) += edb9315.o
+obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
new file mode 100644
index 0000000..62a8efd
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb9302.c
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-ep93xx/edb9302.c
+ * Cirrus Logic EDB9302 support.
+ *
+ * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9302_flash_data = {
+ .width = 2,
+};
+
+static struct resource edb9302_flash_resource = {
+ .start = 0x60000000,
+ .end = 0x60ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device edb9302_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &edb9302_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &edb9302_flash_resource,
+};
+
+static void __init edb9302_init_machine(void)
+{
+ ep93xx_init_devices();
+ platform_device_register(&edb9302_flash);
+}
+
+MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
+ /* Maintainer: George Kashperko <george@chas.com.ua> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb9302_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
new file mode 100644
index 0000000..bfefdaa
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb9315a.c
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-ep93xx/edb9315a.c
+ * Cirrus Logic EDB9315A support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9315a_flash_data = {
+ .width = 2,
+};
+
+static struct resource edb9315a_flash_resource = {
+ .start = 0x60000000,
+ .end = 0x60ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device edb9315a_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &edb9315a_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &edb9315a_flash_resource,
+};
+
+static void __init edb9315a_init_machine(void)
+{
+ ep93xx_init_devices();
+ platform_device_register(&edb9315a_flash);
+}
+
+MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0xc0000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb9315a_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop3xx/Kconfig b/arch/arm/mach-iop3xx/Kconfig
index 2bfe8c7..4422f23 100644
--- a/arch/arm/mach-iop3xx/Kconfig
+++ b/arch/arm/mach-iop3xx/Kconfig
@@ -30,12 +30,15 @@
select ARCH_IOP331
help
Say Y here if you want to run your kernel on the Intel IQ80332
- evaluation kit for the IOP332 chipset
+ evaluation kit for the IOP332 chipset.
config ARCH_EP80219
- bool "Enable support for EP80219"
- select ARCH_IOP321
- select ARCH_IQ31244
+ bool "Enable support for EP80219"
+ select ARCH_IOP321
+ select ARCH_IQ31244
+ help
+ Say Y here if you want to run your kernel on the Intel EP80219
+ evaluation kit for the Intel 80219 chipset (a IOP321 variant).
# Which IOP variant are we running?
config ARCH_IOP321
@@ -56,8 +59,8 @@
bool "Chip stepping D of the IOP80331 processor or IOP80333"
depends on (ARCH_IOP331)
help
- Say Y here if you have StepD of the IOP80331 or IOP8033
- based platforms.
+ Say Y here if you have StepD of the IOP80331 or IOP8033
+ based platforms.
endmenu
endif
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index f8d716c..d135568 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -62,6 +62,13 @@
Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
a board.
+config MACH_OMAP_FSAMPLE
+ bool "TI F-Sample"
+ depends on ARCH_OMAP1 && ARCH_OMAP730
+ help
+ Support for TI OMAP 850 F-Sample board. Say Y here if you have such
+ a board.
+
config MACH_VOICEBLUE
bool "Voiceblue"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 9ea7195..7165f74 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -17,6 +17,7 @@
obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o
+obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o
obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o
obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 73df32a..8437d06 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -80,8 +80,15 @@
.enabled_uarts = 1,
};
+static struct omap_usb_config ams_delta_usb_config __initdata = {
+ .register_host = 1,
+ .hmc_mode = 16,
+ .pins[0] = 2,
+};
+
static struct omap_board_config_kernel ams_delta_config[] = {
{ OMAP_TAG_UART, &ams_delta_uart_config },
+ { OMAP_TAG_USB, &ams_delta_usb_config },
};
static struct platform_device ams_delta_led_device = {
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
new file mode 100644
index 0000000..c753a3c
--- /dev/null
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -0,0 +1,319 @@
+/*
+ * linux/arch/arm/mach-omap1/board-fsample.c
+ *
+ * Modified from board-perseus2.c
+ *
+ * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
+ * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/input.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/tc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/fpga.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/common.h>
+#include <asm/arch/board.h>
+#include <asm/arch/board-fsample.h>
+
+static int fsample_keymap[] = {
+ KEY(0,0,KEY_UP),
+ KEY(0,1,KEY_RIGHT),
+ KEY(0,2,KEY_LEFT),
+ KEY(0,3,KEY_DOWN),
+ KEY(0,4,KEY_CENTER),
+ KEY(0,5,KEY_0_5),
+ KEY(1,0,KEY_SOFT2),
+ KEY(1,1,KEY_SEND),
+ KEY(1,2,KEY_END),
+ KEY(1,3,KEY_VOLUMEDOWN),
+ KEY(1,4,KEY_VOLUMEUP),
+ KEY(1,5,KEY_RECORD),
+ KEY(2,0,KEY_SOFT1),
+ KEY(2,1,KEY_3),
+ KEY(2,2,KEY_6),
+ KEY(2,3,KEY_9),
+ KEY(2,4,KEY_SHARP),
+ KEY(2,5,KEY_2_5),
+ KEY(3,0,KEY_BACK),
+ KEY(3,1,KEY_2),
+ KEY(3,2,KEY_5),
+ KEY(3,3,KEY_8),
+ KEY(3,4,KEY_0),
+ KEY(3,5,KEY_HEADSETHOOK),
+ KEY(4,0,KEY_HOME),
+ KEY(4,1,KEY_1),
+ KEY(4,2,KEY_4),
+ KEY(4,3,KEY_7),
+ KEY(4,4,KEY_STAR),
+ KEY(4,5,KEY_POWER),
+ 0
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */
+ .end = H2P2_DBG_FPGA_ETHR_START + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = INT_730_MPU_EXT_NIRQ,
+ .end = 0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mtd_partition nor_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* rest of flash is a file system */
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ },
+};
+
+static struct flash_platform_data nor_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = nor_partitions,
+ .nr_parts = ARRAY_SIZE(nor_partitions),
+};
+
+static struct resource nor_resource = {
+ .start = OMAP_CS0_PHYS,
+ .end = OMAP_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device nor_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &nor_data,
+ },
+ .num_resources = 1,
+ .resource = &nor_resource,
+};
+
+static struct nand_platform_data nand_data = {
+ .options = NAND_SAMSUNG_LP_OPTIONS,
+};
+
+static struct resource nand_resource = {
+ .start = OMAP_CS3_PHYS,
+ .end = OMAP_CS3_PHYS + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device nand_device = {
+ .name = "omapnand",
+ .id = 0,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .num_resources = 1,
+ .resource = &nand_resource,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static struct resource kp_resources[] = {
+ [0] = {
+ .start = INT_730_MPUIO_KEYPAD,
+ .end = INT_730_MPUIO_KEYPAD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct omap_kp_platform_data kp_data = {
+ .rows = 8,
+ .cols = 8,
+ .keymap = fsample_keymap,
+};
+
+static struct platform_device kp_device = {
+ .name = "omap-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &kp_data,
+ },
+ .num_resources = ARRAY_SIZE(kp_resources),
+ .resource = kp_resources,
+};
+
+static struct platform_device lcd_device = {
+ .name = "lcd_p2",
+ .id = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &nor_device,
+ &nand_device,
+ &smc91x_device,
+ &kp_device,
+ &lcd_device,
+};
+
+#define P2_NAND_RB_GPIO_PIN 62
+
+static int nand_dev_ready(struct nand_platform_data *data)
+{
+ return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN);
+}
+
+static struct omap_uart_config fsample_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1)),
+};
+
+static struct omap_lcd_config fsample_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_board_config_kernel fsample_config[] = {
+ { OMAP_TAG_UART, &fsample_uart_config },
+ { OMAP_TAG_LCD, &fsample_lcd_config },
+};
+
+static void __init omap_fsample_init(void)
+{
+ if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN)))
+ nand_data.dev_ready = nand_dev_ready;
+
+ omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
+ omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ omap_board_config = fsample_config;
+ omap_board_config_size = ARRAY_SIZE(fsample_config);
+ omap_serial_init();
+}
+
+static void __init fsample_init_smc91x(void)
+{
+ fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+ mdelay(50);
+ fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+ H2P2_DBG_FPGA_LAN_RESET);
+ mdelay(50);
+}
+
+void omap_fsample_init_irq(void)
+{
+ omap1_init_common_hw();
+ omap_init_irq();
+ omap_gpio_init();
+ fsample_init_smc91x();
+}
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc omap_fsample_io_desc[] __initdata = {
+ {
+ .virtual = H2P2_DBG_FPGA_BASE,
+ .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
+ .length = H2P2_DBG_FPGA_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = FSAMPLE_CPLD_BASE,
+ .pfn = __phys_to_pfn(FSAMPLE_CPLD_START),
+ .length = FSAMPLE_CPLD_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init omap_fsample_map_io(void)
+{
+ omap1_map_common_io();
+ iotable_init(omap_fsample_io_desc,
+ ARRAY_SIZE(omap_fsample_io_desc));
+
+ /* Early, board-dependent init */
+
+ /*
+ * Hold GSM Reset until needed
+ */
+ omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+
+ /*
+ * UARTs -> done automagically by 8250 driver
+ */
+
+ /*
+ * CSx timings, GPIO Mux ... setup
+ */
+
+ /* Flash: CS0 timings setup */
+ omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
+ omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+
+ /*
+ * Ethernet support through the debug board
+ * CS1 timings setup
+ */
+ omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
+ omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+
+ /*
+ * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+ * It is used as the Ethernet controller interrupt
+ */
+ omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+}
+
+MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
+/* Maintainer: Brian Swetland <swetland@google.com> */
+ .phys_io = 0xfff00000,
+ .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
+ .boot_params = 0x10000100,
+ .map_io = omap_fsample_map_io,
+ .init_irq = omap_fsample_init_irq,
+ .init_machine = omap_fsample_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index e90c137..4cbc62d 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -37,6 +37,8 @@
#include <asm/arch/usb.h>
#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/omap-alsa.h>
static int innovator_keymap[] = {
KEY(0, 0, KEY_F1),
@@ -112,6 +114,42 @@
.resource = &innovator_flash_resource,
};
+#define DEFAULT_BITPERSAMPLE 16
+
+static struct omap_mcbsp_reg_cfg mcbsp_regs = {
+ .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+ .spcr1 = RINTM(3) | RRST,
+ .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+ RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
+ .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
+ .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+ XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
+ .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
+ .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
+ .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
+ /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
+ .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
+};
+
+static struct omap_alsa_codec_config alsa_config = {
+ .name = "OMAP Innovator AIC23",
+ .mcbsp_regs_alsa = &mcbsp_regs,
+ .codec_configure_dev = NULL, // aic23_configure,
+ .codec_set_samplerate = NULL, // aic23_set_samplerate,
+ .codec_clock_setup = NULL, // aic23_clock_setup,
+ .codec_clock_on = NULL, // aic23_clock_on,
+ .codec_clock_off = NULL, // aic23_clock_off,
+ .get_default_samplerate = NULL, // aic23_get_default_samplerate,
+};
+
+static struct platform_device innovator_mcbsp1_device = {
+ .name = "omap_alsa_mcbsp",
+ .id = 1,
+ .dev = {
+ .platform_data = &alsa_config,
+ },
+};
+
static struct resource innovator_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
@@ -139,6 +177,10 @@
#ifdef CONFIG_ARCH_OMAP15XX
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc innovator1510_io_desc[] __initdata = {
{
@@ -174,13 +216,44 @@
.id = -1,
};
+static struct platform_device innovator1510_spi_device = {
+ .name = "spi_inn1510",
+ .id = -1,
+};
+
static struct platform_device *innovator1510_devices[] __initdata = {
&innovator_flash_device,
&innovator1510_smc91x_device,
+ &innovator_mcbsp1_device,
&innovator_kp_device,
&innovator1510_lcd_device,
+ &innovator1510_spi_device,
};
+static int innovator_get_pendown_state(void)
+{
+ return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
+}
+
+static const struct ads7846_platform_data innovator1510_ts_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .get_pendown_state = innovator_get_pendown_state,
+};
+
+static struct spi_board_info __initdata innovator1510_boardinfo[] = { {
+ /* FPGA (bus "10") CS0 has an ads7846e */
+ .modalias = "ads7846",
+ .platform_data = &innovator1510_ts_info,
+ .irq = OMAP1510_INT_FPGA_TS,
+ .max_speed_hz = 120000 /* max sample rate at 3V */
+ * 26 /* command + data + overhead */,
+ .bus_num = 10,
+ .chip_select = 0,
+} };
+
#endif /* CONFIG_ARCH_OMAP15XX */
#ifdef CONFIG_ARCH_OMAP16XX
@@ -311,6 +384,8 @@
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
+ spi_register_board_info(innovator1510_boardinfo,
+ ARRAY_SIZE(innovator1510_boardinfo));
}
#endif
#ifdef CONFIG_ARCH_OMAP16XX
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index ef7685d..9193330 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -33,7 +33,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/input.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
@@ -45,25 +44,10 @@
#include <asm/arch/usb.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
-#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
#include <asm/arch/mcbsp.h>
#include <asm/arch/omap-alsa.h>
-static int osk_keymap[] = {
- KEY(0, 0, KEY_F1),
- KEY(0, 3, KEY_UP),
- KEY(1, 1, KEY_LEFTCTRL),
- KEY(1, 2, KEY_LEFT),
- KEY(2, 0, KEY_SPACE),
- KEY(2, 1, KEY_ESC),
- KEY(2, 2, KEY_DOWN),
- KEY(3, 2, KEY_ENTER),
- KEY(3, 3, KEY_RIGHT),
- 0
-};
-
-
static struct mtd_partition osk_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
@@ -181,48 +165,17 @@
static struct platform_device osk5912_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
- .id = 1,
+ .id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
-static struct resource osk5912_kp_resources[] = {
- [0] = {
- .start = INT_KEYBOARD,
- .end = INT_KEYBOARD,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct omap_kp_platform_data osk_kp_data = {
- .rows = 8,
- .cols = 8,
- .keymap = osk_keymap,
-};
-
-static struct platform_device osk5912_kp_device = {
- .name = "omap-keypad",
- .id = -1,
- .dev = {
- .platform_data = &osk_kp_data,
- },
- .num_resources = ARRAY_SIZE(osk5912_kp_resources),
- .resource = osk5912_kp_resources,
-};
-
-static struct platform_device osk5912_lcd_device = {
- .name = "lcd_osk",
- .id = -1,
-};
-
static struct platform_device *osk5912_devices[] __initdata = {
&osk5912_flash_device,
&osk5912_smc91x_device,
&osk5912_cf_device,
&osk5912_mcbsp1_device,
- &osk5912_kp_device,
- &osk5912_lcd_device,
};
static void __init osk_init_smc91x(void)
@@ -276,18 +229,100 @@
.enabled_uarts = (1 << 0),
};
+#ifdef CONFIG_OMAP_OSK_MISTRAL
static struct omap_lcd_config osk_lcd_config __initdata = {
.ctrl_name = "internal",
};
+#endif
static struct omap_board_config_kernel osk_config[] = {
{ OMAP_TAG_USB, &osk_usb_config },
{ OMAP_TAG_UART, &osk_uart_config },
+#ifdef CONFIG_OMAP_OSK_MISTRAL
{ OMAP_TAG_LCD, &osk_lcd_config },
+#endif
};
#ifdef CONFIG_OMAP_OSK_MISTRAL
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <asm/arch/keypad.h>
+
+static const int osk_keymap[] = {
+ /* KEY(col, row, code) */
+ KEY(0, 0, KEY_F1), /* SW4 */
+ KEY(0, 3, KEY_UP), /* (sw2/up) */
+ KEY(1, 1, KEY_LEFTCTRL), /* SW5 */
+ KEY(1, 2, KEY_LEFT), /* (sw2/left) */
+ KEY(2, 0, KEY_SPACE), /* SW3 */
+ KEY(2, 1, KEY_ESC), /* SW6 */
+ KEY(2, 2, KEY_DOWN), /* (sw2/down) */
+ KEY(3, 2, KEY_ENTER), /* (sw2/select) */
+ KEY(3, 3, KEY_RIGHT), /* (sw2/right) */
+ 0
+};
+
+static struct omap_kp_platform_data osk_kp_data = {
+ .rows = 8,
+ .cols = 8,
+ .keymap = (int *) osk_keymap,
+};
+
+static struct resource osk5912_kp_resources[] = {
+ [0] = {
+ .start = INT_KEYBOARD,
+ .end = INT_KEYBOARD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device osk5912_kp_device = {
+ .name = "omap-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &osk_kp_data,
+ },
+ .num_resources = ARRAY_SIZE(osk5912_kp_resources),
+ .resource = osk5912_kp_resources,
+};
+
+static struct platform_device osk5912_lcd_device = {
+ .name = "lcd_osk",
+ .id = -1,
+};
+
+static struct platform_device *mistral_devices[] __initdata = {
+ &osk5912_kp_device,
+ &osk5912_lcd_device,
+};
+
+static int mistral_get_pendown_state(void)
+{
+ return !omap_get_gpio_datain(4);
+}
+
+static const struct ads7846_platform_data mistral_ts_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .get_pendown_state = mistral_get_pendown_state,
+};
+
+static struct spi_board_info __initdata mistral_boardinfo[] = { {
+ /* MicroWire (bus 2) CS0 has an ads7846e */
+ .modalias = "ads7846",
+ .platform_data = &mistral_ts_info,
+ .irq = OMAP_GPIO_IRQ(4),
+ .max_speed_hz = 120000 /* max sample rate at 3V */
+ * 26 /* command + data + overhead */,
+ .bus_num = 2,
+ .chip_select = 0,
+} };
+
#ifdef CONFIG_PM
static irqreturn_t
osk_mistral_wake_interrupt(int irq, void *ignored, struct pt_regs *regs)
@@ -298,14 +333,18 @@
static void __init osk_mistral_init(void)
{
- /* FIXME here's where to feed in framebuffer, touchpad, and
- * keyboard setup ... not in the drivers for those devices!
- *
- * NOTE: we could actually tell if there's a Mistral board
+ /* NOTE: we could actually tell if there's a Mistral board
* attached, e.g. by trying to read something from the ads7846.
- * But this is too early for that...
+ * But this arch_init() code is too early for that, since we
+ * can't talk to the ads or even the i2c eeprom.
*/
+ // omap_cfg_reg(P19_1610_GPIO6); // BUSY
+ omap_cfg_reg(P20_1610_GPIO4); // PENIRQ
+ set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
+ spi_register_board_info(mistral_boardinfo,
+ ARRAY_SIZE(mistral_boardinfo));
+
/* the sideways button (SW1) is for use as a "wakeup" button */
omap_cfg_reg(N15_1610_MPUIO2);
if (omap_request_gpio(OMAP_MPUIO(2)) == 0) {
@@ -329,6 +368,8 @@
#endif
} else
printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
+
+ platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
}
#else
static void __init osk_mistral_init(void) { }
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 619db18..f1958e8 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -1,3 +1,4 @@
+//kernel/linux-omap-fsample/arch/arm/mach-omap1/clock.c#2 - edit change 3808 (text)
/*
* linux/arch/arm/mach-omap1/clock.c
*
@@ -20,6 +21,7 @@
#include <asm/io.h>
+#include <asm/arch/cpu.h>
#include <asm/arch/usb.h>
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
@@ -270,8 +272,12 @@
/*
* In most cases we should not need to reprogram DPLL.
* Reprogramming the DPLL is tricky, it must be done from SRAM.
+ * (on 730, bit 13 must always be 1)
*/
- omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
+ if (cpu_is_omap730())
+ omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000);
+ else
+ omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
ck_dpll1.rate = ptr->pll_rate;
propagate_rate(&ck_dpll1);
@@ -748,7 +754,7 @@
printk(KERN_ERR "System frequencies not set. Check your config.\n");
/* Guess sane values (60MHz) */
omap_writew(0x2290, DPLL_CTL);
- omap_writew(0x1005, ARM_CKCTL);
+ omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
ck_dpll1.rate = 60000000;
propagate_rate(&ck_dpll1);
}
@@ -761,13 +767,17 @@
ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
/* Select slicer output as OMAP input clock */
omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
#endif
/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
- omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
+ /* (on 730, bit 13 must not be cleared) */
+ if (cpu_is_omap730())
+ omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
+ else
+ omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
/* Put DSP/MPUI into reset until needed */
omap_writew(0, ARM_RSTCT1);
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index ddf6b07..1b4e1d5 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -1,3 +1,4 @@
+//kernel/linux-omap-fsample/arch/arm/mach-omap1/pm.c#3 - integrate change 4545 (text)
/*
* linux/arch/arm/mach-omap1/pm.c
*
@@ -50,6 +51,7 @@
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
+#include <asm/arch/cpu.h>
#include <asm/arch/irqs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
@@ -326,8 +328,9 @@
/* stop DSP */
omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
- /* shut down dsp_ck */
- omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
+ /* shut down dsp_ck */
+ if (!cpu_is_omap730())
+ omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
/* temporarily enabling api_ck to access DSP registers */
omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index c2d3205..a01f0ef 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -93,7 +93,7 @@
* will break. On P2, the timer count rate is 6.5 MHz after programming PTV
* with 0. This divides the 13MHz input by 2, and is undocumented.
*/
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
/* REVISIT: This ifdef construct should be replaced by a query to clock
* framework to see if timer base frequency is 12.0, 13.0 or 19.2 MHz.
*/
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 537dd2e..aab97cc 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -8,6 +8,7 @@
config ARCH_OMAP2420
bool "OMAP2420 support"
depends on ARCH_OMAP24XX
+ select OMAP_DM_TIMER
comment "OMAP Board Type"
depends on ARCH_OMAP2
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 111eaa6..266d88e 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,12 +3,13 @@
#
# Common support
-obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o serial.o
+obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o \
+ serial.o gpmc.o
obj-$(CONFIG_OMAP_MPU_TIMER) += timer-gp.o
# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o pm-domain.o sleep.o
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 7edf0f6..d1b648a 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -659,26 +659,35 @@
/* Isolate control register */
div_sel = (SRC_RATE_SEL_MASK & clk->flags);
- div_off = clk->src_offset;
+ div_off = clk->rate_offset;
validrate = omap2_clksel_round_rate(clk, rate, &new_div);
- if(validrate != rate)
+ if (validrate != rate)
return(ret);
field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
if (div_sel == 0)
return ret;
- if(clk->flags & CM_SYSCLKOUT_SEL1){
- switch(new_div){
- case 16: field_val = 4; break;
- case 8: field_val = 3; break;
- case 4: field_val = 2; break;
- case 2: field_val = 1; break;
- case 1: field_val = 0; break;
+ if (clk->flags & CM_SYSCLKOUT_SEL1) {
+ switch (new_div) {
+ case 16:
+ field_val = 4;
+ break;
+ case 8:
+ field_val = 3;
+ break;
+ case 4:
+ field_val = 2;
+ break;
+ case 2:
+ field_val = 1;
+ break;
+ case 1:
+ field_val = 0;
+ break;
}
- }
- else
+ } else
field_val = new_div;
reg = (void __iomem *)div_sel;
@@ -743,7 +752,7 @@
val = 0x2;
break;
case CM_WKUP_SEL1:
- src_reg_addr = (u32)&CM_CLKSEL2_CORE;
+ src_reg_addr = (u32)&CM_CLKSEL_WKUP;
mask = 0x3;
if (src_clk == &func_32k_ck)
val = 0x0;
@@ -783,9 +792,9 @@
val = 0;
if (src_clk == &sys_ck)
val = 1;
- if (src_clk == &func_54m_ck)
- val = 2;
if (src_clk == &func_96m_ck)
+ val = 2;
+ if (src_clk == &func_54m_ck)
val = 3;
break;
}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 6c78d47..2781dfb 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -1062,7 +1062,7 @@
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit4 */
- .enable_bit = 0,
+ .enable_bit = 4,
.recalc = &omap2_followparent_recalc,
};
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 4842ffe..aa43224 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -104,6 +104,51 @@
static inline void omap_init_sti(void) {}
#endif
+#if defined(CONFIG_SPI_OMAP24XX)
+
+#include <asm/arch/mcspi.h>
+
+#define OMAP2_MCSPI1_BASE 0x48098000
+#define OMAP2_MCSPI2_BASE 0x4809a000
+
+/* FIXME: use resources instead */
+
+static struct omap2_mcspi_platform_config omap2_mcspi1_config = {
+ .base = io_p2v(OMAP2_MCSPI1_BASE),
+ .num_cs = 4,
+};
+
+struct platform_device omap2_mcspi1 = {
+ .name = "omap2_mcspi",
+ .id = 1,
+ .dev = {
+ .platform_data = &omap2_mcspi1_config,
+ },
+};
+
+static struct omap2_mcspi_platform_config omap2_mcspi2_config = {
+ .base = io_p2v(OMAP2_MCSPI2_BASE),
+ .num_cs = 2,
+};
+
+struct platform_device omap2_mcspi2 = {
+ .name = "omap2_mcspi",
+ .id = 2,
+ .dev = {
+ .platform_data = &omap2_mcspi2_config,
+ },
+};
+
+static void omap_init_mcspi(void)
+{
+ platform_device_register(&omap2_mcspi1);
+ platform_device_register(&omap2_mcspi2);
+}
+
+#else
+static inline void omap_init_mcspi(void) {}
+#endif
+
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
@@ -112,6 +157,7 @@
* in alphabetical order so they're easier to sort through.
*/
omap_init_i2c();
+ omap_init_mcspi();
omap_init_sti();
return 0;
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
new file mode 100644
index 0000000..c7a48f9
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -0,0 +1,209 @@
+/*
+ * GPMC support functions
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/arch/gpmc.h>
+
+#undef DEBUG
+
+#define GPMC_BASE 0x6800a000
+#define GPMC_REVISION 0x00
+#define GPMC_SYSCONFIG 0x10
+#define GPMC_SYSSTATUS 0x14
+#define GPMC_IRQSTATUS 0x18
+#define GPMC_IRQENABLE 0x1c
+#define GPMC_TIMEOUT_CONTROL 0x40
+#define GPMC_ERR_ADDRESS 0x44
+#define GPMC_ERR_TYPE 0x48
+#define GPMC_CONFIG 0x50
+#define GPMC_STATUS 0x54
+#define GPMC_PREFETCH_CONFIG1 0x1e0
+#define GPMC_PREFETCH_CONFIG2 0x1e4
+#define GPMC_PREFETCH_CONTROL 0x1e8
+#define GPMC_PREFETCH_STATUS 0x1f0
+#define GPMC_ECC_CONFIG 0x1f4
+#define GPMC_ECC_CONTROL 0x1f8
+#define GPMC_ECC_SIZE_CONFIG 0x1fc
+
+#define GPMC_CS0 0x60
+#define GPMC_CS_SIZE 0x30
+
+static void __iomem *gpmc_base =
+ (void __iomem *) IO_ADDRESS(GPMC_BASE);
+static void __iomem *gpmc_cs_base =
+ (void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
+
+static struct clk *gpmc_l3_clk;
+
+static void gpmc_write_reg(int idx, u32 val)
+{
+ __raw_writel(val, gpmc_base + idx);
+}
+
+static u32 gpmc_read_reg(int idx)
+{
+ return __raw_readl(gpmc_base + idx);
+}
+
+void gpmc_cs_write_reg(int cs, int idx, u32 val)
+{
+ void __iomem *reg_addr;
+
+ reg_addr = gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx;
+ __raw_writel(val, reg_addr);
+}
+
+u32 gpmc_cs_read_reg(int cs, int idx)
+{
+ return __raw_readl(gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx);
+}
+
+/* TODO: Add support for gpmc_fck to clock framework and use it */
+static unsigned long gpmc_get_fclk_period(void)
+{
+ /* In picoseconds */
+ return 1000000000 / ((clk_get_rate(gpmc_l3_clk)) / 1000);
+}
+
+unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
+{
+ unsigned long tick_ps;
+
+ /* Calculate in picosecs to yield more exact results */
+ tick_ps = gpmc_get_fclk_period();
+
+ return (time_ns * 1000 + tick_ps - 1) / tick_ps;
+}
+
+#ifdef DEBUG
+static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
+ int time, const char *name)
+#else
+static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
+ int time)
+#endif
+{
+ u32 l;
+ int ticks, mask, nr_bits;
+
+ if (time == 0)
+ ticks = 0;
+ else
+ ticks = gpmc_ns_to_ticks(time);
+ nr_bits = end_bit - st_bit + 1;
+ if (ticks >= 1 << nr_bits)
+ return -1;
+
+ mask = (1 << nr_bits) - 1;
+ l = gpmc_cs_read_reg(cs, reg);
+#ifdef DEBUG
+ printk(KERN_INFO "GPMC CS%d: %-10s: %d ticks, %3lu ns (was %i ticks)\n",
+ cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000,
+ (l >> st_bit) & mask);
+#endif
+ l &= ~(mask << st_bit);
+ l |= ticks << st_bit;
+ gpmc_cs_write_reg(cs, reg, l);
+
+ return 0;
+}
+
+#ifdef DEBUG
+#define GPMC_SET_ONE(reg, st, end, field) \
+ if (set_gpmc_timing_reg(cs, (reg), (st), (end), \
+ t->field, #field) < 0) \
+ return -1
+#else
+#define GPMC_SET_ONE(reg, st, end, field) \
+ if (set_gpmc_timing_reg(cs, (reg), (st), (end), t->field) < 0) \
+ return -1
+#endif
+
+int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
+{
+ int div;
+ u32 l;
+
+ l = sync_clk * 1000 + (gpmc_get_fclk_period() - 1);
+ div = l / gpmc_get_fclk_period();
+ if (div > 4)
+ return -1;
+ if (div < 0)
+ div = 1;
+
+ return div;
+}
+
+int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
+{
+ int div;
+ u32 l;
+
+ div = gpmc_cs_calc_divider(cs, t->sync_clk);
+ if (div < 0)
+ return -1;
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG2, 0, 3, cs_on);
+ GPMC_SET_ONE(GPMC_CS_CONFIG2, 8, 12, cs_rd_off);
+ GPMC_SET_ONE(GPMC_CS_CONFIG2, 16, 20, cs_wr_off);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG3, 0, 3, adv_on);
+ GPMC_SET_ONE(GPMC_CS_CONFIG3, 8, 12, adv_rd_off);
+ GPMC_SET_ONE(GPMC_CS_CONFIG3, 16, 20, adv_wr_off);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG4, 0, 3, oe_on);
+ GPMC_SET_ONE(GPMC_CS_CONFIG4, 8, 12, oe_off);
+ GPMC_SET_ONE(GPMC_CS_CONFIG4, 16, 19, we_on);
+ GPMC_SET_ONE(GPMC_CS_CONFIG4, 24, 28, we_off);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG5, 0, 4, rd_cycle);
+ GPMC_SET_ONE(GPMC_CS_CONFIG5, 8, 12, wr_cycle);
+ GPMC_SET_ONE(GPMC_CS_CONFIG5, 16, 20, access);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
+
+#ifdef DEBUG
+ printk(KERN_INFO "GPMC CS%d CLK period is %lu (div %d)\n",
+ cs, gpmc_get_fclk_period(), div);
+#endif
+
+ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+ l &= ~0x03;
+ l |= (div - 1);
+
+ return 0;
+}
+
+unsigned long gpmc_cs_get_base_addr(int cs)
+{
+ return (gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7) & 0x1f) << 24;
+}
+
+void __init gpmc_init(void)
+{
+ u32 l;
+
+ gpmc_l3_clk = clk_get(NULL, "core_l3_ck");
+ BUG_ON(IS_ERR(gpmc_l3_clk));
+
+ l = gpmc_read_reg(GPMC_REVISION);
+ printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
+ /* Set smart idle mode and automatic L3 clock gating */
+ l = gpmc_read_reg(GPMC_SYSCONFIG);
+ l &= 0x03 << 3;
+ l |= (0x02 << 3) | (1 << 0);
+ gpmc_write_reg(GPMC_SYSCONFIG, l);
+}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 20dd6e7..a0728c3 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -26,6 +26,7 @@
extern void omap_sram_init(void);
extern int omap2_clk_init(void);
extern void omap2_check_revision(void);
+extern void gpmc_init(void);
/*
* The machine specific code may provide the extra mapping besides the
@@ -66,4 +67,5 @@
{
omap2_mux_init();
omap2_clk_init();
+ gpmc_init();
}
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 4c5f2c0..60ef084 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -52,6 +52,12 @@
/* 24xx clocks */
MUX_CFG_24XX("W14_24XX_SYS_CLKOUT", 0x137, 0, 1, 1, 1)
+/* 24xx GPMC wait pin monitoring */
+MUX_CFG_24XX("L3_GPMC_WAIT0", 0x09a, 0, 1, 1, 1)
+MUX_CFG_24XX("N7_GPMC_WAIT1", 0x09b, 0, 1, 1, 1)
+MUX_CFG_24XX("M1_GPMC_WAIT2", 0x09c, 0, 1, 1, 1)
+MUX_CFG_24XX("P1_GPMC_WAIT3", 0x09d, 0, 1, 1, 1)
+
/* 24xx McBSP */
MUX_CFG_24XX("Y15_24XX_MCBSP2_CLKX", 0x124, 1, 1, 0, 1)
MUX_CFG_24XX("R14_24XX_MCBSP2_FSX", 0x125, 1, 1, 0, 1)
@@ -59,18 +65,38 @@
MUX_CFG_24XX("V15_24XX_MCBSP2_DX", 0x127, 1, 1, 0, 1)
/* 24xx GPIO */
-MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1)
+MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1)
MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1)
-MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1)
-MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1)
-MUX_CFG_24XX("Y11_242X_GPIO16", 0x0e8, 3, 0, 0, 1)
+MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1)
+MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1)
+MUX_CFG_24XX("Y11_242X_GPIO16", 0x0e8, 3, 0, 0, 1)
MUX_CFG_24XX("AA12_242X_GPIO17", 0x0e9, 3, 0, 0, 1)
-MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1)
+MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1)
MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1)
-MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1)
+MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1)
MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1)
MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1)
+/* 242x DBG GPIO */
+MUX_CFG_24XX("V4_242X_GPIO49", 0xd3, 3, 0, 0, 1)
+MUX_CFG_24XX("W2_242X_GPIO50", 0xd4, 3, 0, 0, 1)
+MUX_CFG_24XX("U4_242X_GPIO51", 0xd5, 3, 0, 0, 1)
+MUX_CFG_24XX("V3_242X_GPIO52", 0xd6, 3, 0, 0, 1)
+MUX_CFG_24XX("V2_242X_GPIO53", 0xd7, 3, 0, 0, 1)
+MUX_CFG_24XX("V6_242X_GPIO53", 0xcf, 3, 0, 0, 1)
+MUX_CFG_24XX("T4_242X_GPIO54", 0xd8, 3, 0, 0, 1)
+MUX_CFG_24XX("Y4_242X_GPIO54", 0xd0, 3, 0, 0, 1)
+MUX_CFG_24XX("T3_242X_GPIO55", 0xd9, 3, 0, 0, 1)
+MUX_CFG_24XX("U2_242X_GPIO56", 0xda, 3, 0, 0, 1)
+
+/* 24xx external DMA requests */
+MUX_CFG_24XX("AA10_242X_DMAREQ0", 0x0e5, 2, 0, 0, 1)
+MUX_CFG_24XX("AA6_242X_DMAREQ1", 0x0e6, 2, 0, 0, 1)
+MUX_CFG_24XX("E4_242X_DMAREQ2", 0x074, 2, 0, 0, 1)
+MUX_CFG_24XX("G4_242X_DMAREQ3", 0x073, 2, 0, 0, 1)
+MUX_CFG_24XX("D3_242X_DMAREQ4", 0x072, 2, 0, 0, 1)
+MUX_CFG_24XX("E3_242X_DMAREQ5", 0x071, 2, 0, 0, 1)
+
/* TSC IRQ */
MUX_CFG_24XX("P20_24XX_TSC_IRQ", 0x108, 0, 0, 0, 1)
diff --git a/arch/arm/mach-omap2/pm-domain.c b/arch/arm/mach-omap2/pm-domain.c
new file mode 100644
index 0000000..5e20e74
--- /dev/null
+++ b/arch/arm/mach-omap2/pm-domain.c
@@ -0,0 +1,300 @@
+/*
+ * linux/arch/arm/mach-omap2/pm-domain.c
+ *
+ * Power domain functions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * Some code based on earlier OMAP2 sample PM code
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+
+#include "prcm-regs.h"
+
+/* Power domain offsets */
+#define PM_MPU_OFFSET 0x100
+#define PM_CORE_OFFSET 0x200
+#define PM_GFX_OFFSET 0x300
+#define PM_WKUP_OFFSET 0x400 /* Autoidle only */
+#define PM_PLL_OFFSET 0x500 /* Autoidle only */
+#define PM_DSP_OFFSET 0x800
+#define PM_MDM_OFFSET 0xc00
+
+/* Power domain wake-up dependency control register */
+#define PM_WKDEP_OFFSET 0xc8
+#define EN_MDM (1 << 5)
+#define EN_WKUP (1 << 4)
+#define EN_GFX (1 << 3)
+#define EN_DSP (1 << 2)
+#define EN_MPU (1 << 1)
+#define EN_CORE (1 << 0)
+
+/* Core power domain state transition control register */
+#define PM_PWSTCTRL_OFFSET 0xe0
+#define FORCESTATE (1 << 18) /* Only for DSP & GFX */
+#define MEM4RETSTATE (1 << 6)
+#define MEM3RETSTATE (1 << 5)
+#define MEM2RETSTATE (1 << 4)
+#define MEM1RETSTATE (1 << 3)
+#define LOGICRETSTATE (1 << 2) /* Logic is retained */
+#define POWERSTATE_OFF 0x3
+#define POWERSTATE_RETENTION 0x1
+#define POWERSTATE_ON 0x0
+
+/* Power domain state register */
+#define PM_PWSTST_OFFSET 0xe4
+
+/* Hardware supervised state transition control register */
+#define CM_CLKSTCTRL_OFFSET 0x48
+#define AUTOSTAT_MPU (1 << 0) /* MPU */
+#define AUTOSTAT_DSS (1 << 2) /* Core */
+#define AUTOSTAT_L4 (1 << 1) /* Core */
+#define AUTOSTAT_L3 (1 << 0) /* Core */
+#define AUTOSTAT_GFX (1 << 0) /* GFX */
+#define AUTOSTAT_IVA (1 << 8) /* 2420 IVA in DSP domain */
+#define AUTOSTAT_DSP (1 << 0) /* DSP */
+#define AUTOSTAT_MDM (1 << 0) /* MDM */
+
+/* Automatic control of interface clock idling */
+#define CM_AUTOIDLE1_OFFSET 0x30
+#define CM_AUTOIDLE2_OFFSET 0x34 /* Core only */
+#define CM_AUTOIDLE3_OFFSET 0x38 /* Core only */
+#define CM_AUTOIDLE4_OFFSET 0x3c /* Core only */
+#define AUTO_54M(x) (((x) & 0x3) << 6)
+#define AUTO_96M(x) (((x) & 0x3) << 2)
+#define AUTO_DPLL(x) (((x) & 0x3) << 0)
+#define AUTO_STOPPED 0x3
+#define AUTO_BYPASS_FAST 0x2 /* DPLL only */
+#define AUTO_BYPASS_LOW_POWER 0x1 /* DPLL only */
+#define AUTO_DISABLED 0x0
+
+/* Voltage control PRCM_VOLTCTRL bits */
+#define AUTO_EXTVOLT (1 << 15)
+#define FORCE_EXTVOLT (1 << 14)
+#define SETOFF_LEVEL(x) (((x) & 0x3) << 12)
+#define MEMRETCTRL (1 << 8)
+#define SETRET_LEVEL(x) (((x) & 0x3) << 6)
+#define VOLT_LEVEL(x) (((x) & 0x3) << 0)
+
+#define OMAP24XX_PRCM_VBASE IO_ADDRESS(OMAP24XX_PRCM_BASE)
+#define prcm_readl(r) __raw_readl(OMAP24XX_PRCM_VBASE + (r))
+#define prcm_writel(v, r) __raw_writel((v), OMAP24XX_PRCM_VBASE + (r))
+
+static u32 pmdomain_get_wakeup_dependencies(int domain_offset)
+{
+ return prcm_readl(domain_offset + PM_WKDEP_OFFSET);
+}
+
+static void pmdomain_set_wakeup_dependencies(u32 state, int domain_offset)
+{
+ prcm_writel(state, domain_offset + PM_WKDEP_OFFSET);
+}
+
+static u32 pmdomain_get_powerstate(int domain_offset)
+{
+ return prcm_readl(domain_offset + PM_PWSTCTRL_OFFSET);
+}
+
+static void pmdomain_set_powerstate(u32 state, int domain_offset)
+{
+ prcm_writel(state, domain_offset + PM_PWSTCTRL_OFFSET);
+}
+
+static u32 pmdomain_get_clock_autocontrol(int domain_offset)
+{
+ return prcm_readl(domain_offset + CM_CLKSTCTRL_OFFSET);
+}
+
+static void pmdomain_set_clock_autocontrol(u32 state, int domain_offset)
+{
+ prcm_writel(state, domain_offset + CM_CLKSTCTRL_OFFSET);
+}
+
+static u32 pmdomain_get_clock_autoidle1(int domain_offset)
+{
+ return prcm_readl(domain_offset + CM_AUTOIDLE1_OFFSET);
+}
+
+/* Core domain only */
+static u32 pmdomain_get_clock_autoidle2(int domain_offset)
+{
+ return prcm_readl(domain_offset + CM_AUTOIDLE2_OFFSET);
+}
+
+/* Core domain only */
+static u32 pmdomain_get_clock_autoidle3(int domain_offset)
+{
+ return prcm_readl(domain_offset + CM_AUTOIDLE3_OFFSET);
+}
+
+/* Core domain only */
+static u32 pmdomain_get_clock_autoidle4(int domain_offset)
+{
+ return prcm_readl(domain_offset + CM_AUTOIDLE4_OFFSET);
+}
+
+static void pmdomain_set_clock_autoidle1(u32 state, int domain_offset)
+{
+ prcm_writel(state, CM_AUTOIDLE1_OFFSET + domain_offset);
+}
+
+/* Core domain only */
+static void pmdomain_set_clock_autoidle2(u32 state, int domain_offset)
+{
+ prcm_writel(state, CM_AUTOIDLE2_OFFSET + domain_offset);
+}
+
+/* Core domain only */
+static void pmdomain_set_clock_autoidle3(u32 state, int domain_offset)
+{
+ prcm_writel(state, CM_AUTOIDLE3_OFFSET + domain_offset);
+}
+
+/* Core domain only */
+static void pmdomain_set_clock_autoidle4(u32 state, int domain_offset)
+{
+ prcm_writel(state, CM_AUTOIDLE4_OFFSET + domain_offset);
+}
+
+/*
+ * Configures power management domains to idle clocks automatically.
+ */
+void pmdomain_set_autoidle(void)
+{
+ u32 val;
+
+ /* Set PLL auto stop for 54M, 96M & DPLL */
+ pmdomain_set_clock_autoidle1(AUTO_54M(AUTO_STOPPED) |
+ AUTO_96M(AUTO_STOPPED) |
+ AUTO_DPLL(AUTO_STOPPED), PM_PLL_OFFSET);
+
+ /* External clock input control
+ * REVISIT: Should this be in clock framework?
+ */
+ PRCM_CLKSRC_CTRL |= (0x3 << 3);
+
+ /* Configure number of 32KHz clock cycles for sys_clk */
+ PRCM_CLKSSETUP = 0x00ff;
+
+ /* Configure automatic voltage transition */
+ PRCM_VOLTSETUP = 0;
+ val = PRCM_VOLTCTRL;
+ val &= ~(SETOFF_LEVEL(0x3) | VOLT_LEVEL(0x3));
+ val |= SETOFF_LEVEL(1) | VOLT_LEVEL(1) | AUTO_EXTVOLT;
+ PRCM_VOLTCTRL = val;
+
+ /* Disable emulation tools functional clock */
+ PRCM_CLKEMUL_CTRL = 0x0;
+
+ /* Set core memory retention state */
+ val = pmdomain_get_powerstate(PM_CORE_OFFSET);
+ if (cpu_is_omap2420()) {
+ val &= ~(0x7 << 3);
+ val |= (MEM3RETSTATE | MEM2RETSTATE | MEM1RETSTATE);
+ } else {
+ val &= ~(0xf << 3);
+ val |= (MEM4RETSTATE | MEM3RETSTATE | MEM2RETSTATE |
+ MEM1RETSTATE);
+ }
+ pmdomain_set_powerstate(val, PM_CORE_OFFSET);
+
+ /* OCP interface smart idle. REVISIT: Enable autoidle bit0 ? */
+ val = SMS_SYSCONFIG;
+ val &= ~(0x3 << 3);
+ val |= (0x2 << 3) | (1 << 0);
+ SMS_SYSCONFIG |= val;
+
+ val = SDRC_SYSCONFIG;
+ val &= ~(0x3 << 3);
+ val |= (0x2 << 3);
+ SDRC_SYSCONFIG = val;
+
+ /* Configure L3 interface for smart idle.
+ * REVISIT: Enable autoidle bit0 ?
+ */
+ val = GPMC_SYSCONFIG;
+ val &= ~(0x3 << 3);
+ val |= (0x2 << 3) | (1 << 0);
+ GPMC_SYSCONFIG = val;
+
+ pmdomain_set_powerstate(LOGICRETSTATE | POWERSTATE_RETENTION,
+ PM_MPU_OFFSET);
+ pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_CORE_OFFSET);
+ if (!cpu_is_omap2420())
+ pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_MDM_OFFSET);
+
+ /* Assume suspend function has saved the state for DSP and GFX */
+ pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_DSP_OFFSET);
+ pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_GFX_OFFSET);
+
+#if 0
+ /* REVISIT: Internal USB needs special handling */
+ force_standby_usb();
+ if (cpu_is_omap2430())
+ force_hsmmc();
+ sdram_self_refresh_on_idle_req(1);
+#endif
+
+ /* Enable clock auto control for all domains.
+ * Note that CORE domain includes also DSS, L4 & L3.
+ */
+ pmdomain_set_clock_autocontrol(AUTOSTAT_MPU, PM_MPU_OFFSET);
+ pmdomain_set_clock_autocontrol(AUTOSTAT_GFX, PM_GFX_OFFSET);
+ pmdomain_set_clock_autocontrol(AUTOSTAT_DSS | AUTOSTAT_L4 | AUTOSTAT_L3,
+ PM_CORE_OFFSET);
+ if (cpu_is_omap2420())
+ pmdomain_set_clock_autocontrol(AUTOSTAT_IVA | AUTOSTAT_DSP,
+ PM_DSP_OFFSET);
+ else {
+ pmdomain_set_clock_autocontrol(AUTOSTAT_DSP, PM_DSP_OFFSET);
+ pmdomain_set_clock_autocontrol(AUTOSTAT_MDM, PM_MDM_OFFSET);
+ }
+
+ /* Enable clock autoidle for all domains */
+ pmdomain_set_clock_autoidle1(0x2, PM_DSP_OFFSET);
+ if (cpu_is_omap2420()) {
+ pmdomain_set_clock_autoidle1(0xfffffff9, PM_CORE_OFFSET);
+ pmdomain_set_clock_autoidle2(0x7, PM_CORE_OFFSET);
+ pmdomain_set_clock_autoidle1(0x3f, PM_WKUP_OFFSET);
+ } else {
+ pmdomain_set_clock_autoidle1(0xeafffff1, PM_CORE_OFFSET);
+ pmdomain_set_clock_autoidle2(0xfff, PM_CORE_OFFSET);
+ pmdomain_set_clock_autoidle1(0x7f, PM_WKUP_OFFSET);
+ pmdomain_set_clock_autoidle1(0x3, PM_MDM_OFFSET);
+ }
+ pmdomain_set_clock_autoidle3(0x7, PM_CORE_OFFSET);
+ pmdomain_set_clock_autoidle4(0x1f, PM_CORE_OFFSET);
+}
+
+/*
+ * Initializes power domains by removing wake-up dependencies and powering
+ * down DSP and GFX. Gets called from PM init. Note that DSP and IVA code
+ * must re-enable DSP and GFX when used.
+ */
+void __init pmdomain_init(void)
+{
+ /* Remove all domain wakeup dependencies */
+ pmdomain_set_wakeup_dependencies(EN_WKUP | EN_CORE, PM_MPU_OFFSET);
+ pmdomain_set_wakeup_dependencies(0, PM_DSP_OFFSET);
+ pmdomain_set_wakeup_dependencies(0, PM_GFX_OFFSET);
+ pmdomain_set_wakeup_dependencies(EN_WKUP | EN_MPU, PM_CORE_OFFSET);
+ if (cpu_is_omap2430())
+ pmdomain_set_wakeup_dependencies(0, PM_MDM_OFFSET);
+
+ /* Power down DSP and GFX */
+ pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_DSP_OFFSET);
+ pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_GFX_OFFSET);
+}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 562168f..d7eee99 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/sysfs.h>
#include <linux/module.h>
+#include <linux/delay.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -36,11 +37,18 @@
#include <asm/arch/sram.h>
#include <asm/arch/pm.h>
+#include "prcm-regs.h"
+
static struct clk *vclk;
static void (*omap2_sram_idle)(void);
static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
static void (*saved_idle)(void);
+extern void __init pmdomain_init(void);
+extern void pmdomain_set_autoidle(void);
+
+static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
+
void omap2_pm_idle(void)
{
local_irq_disable();
@@ -87,23 +95,272 @@
return error;
}
+#define INT0_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK1) | \
+ OMAP_IRQ_BIT(INT_24XX_GPIO_BANK2) | \
+ OMAP_IRQ_BIT(INT_24XX_GPIO_BANK3))
+
+#define INT1_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK4))
+
+#define INT2_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_UART1_IRQ) | \
+ OMAP_IRQ_BIT(INT_24XX_UART2_IRQ) | \
+ OMAP_IRQ_BIT(INT_24XX_UART3_IRQ))
+
+#define preg(reg) printk("%s\t(0x%p):\t0x%08x\n", #reg, ®, reg);
+
+static void omap2_pm_debug(char * desc)
+{
+ printk("%s:\n", desc);
+
+ preg(CM_CLKSTCTRL_MPU);
+ preg(CM_CLKSTCTRL_CORE);
+ preg(CM_CLKSTCTRL_GFX);
+ preg(CM_CLKSTCTRL_DSP);
+ preg(CM_CLKSTCTRL_MDM);
+
+ preg(PM_PWSTCTRL_MPU);
+ preg(PM_PWSTCTRL_CORE);
+ preg(PM_PWSTCTRL_GFX);
+ preg(PM_PWSTCTRL_DSP);
+ preg(PM_PWSTCTRL_MDM);
+
+ preg(PM_PWSTST_MPU);
+ preg(PM_PWSTST_CORE);
+ preg(PM_PWSTST_GFX);
+ preg(PM_PWSTST_DSP);
+ preg(PM_PWSTST_MDM);
+
+ preg(CM_AUTOIDLE1_CORE);
+ preg(CM_AUTOIDLE2_CORE);
+ preg(CM_AUTOIDLE3_CORE);
+ preg(CM_AUTOIDLE4_CORE);
+ preg(CM_AUTOIDLE_WKUP);
+ preg(CM_AUTOIDLE_PLL);
+ preg(CM_AUTOIDLE_DSP);
+ preg(CM_AUTOIDLE_MDM);
+
+ preg(CM_ICLKEN1_CORE);
+ preg(CM_ICLKEN2_CORE);
+ preg(CM_ICLKEN3_CORE);
+ preg(CM_ICLKEN4_CORE);
+ preg(CM_ICLKEN_GFX);
+ preg(CM_ICLKEN_WKUP);
+ preg(CM_ICLKEN_DSP);
+ preg(CM_ICLKEN_MDM);
+
+ preg(CM_IDLEST1_CORE);
+ preg(CM_IDLEST2_CORE);
+ preg(CM_IDLEST3_CORE);
+ preg(CM_IDLEST4_CORE);
+ preg(CM_IDLEST_GFX);
+ preg(CM_IDLEST_WKUP);
+ preg(CM_IDLEST_CKGEN);
+ preg(CM_IDLEST_DSP);
+ preg(CM_IDLEST_MDM);
+
+ preg(RM_RSTST_MPU);
+ preg(RM_RSTST_GFX);
+ preg(RM_RSTST_WKUP);
+ preg(RM_RSTST_DSP);
+ preg(RM_RSTST_MDM);
+
+ preg(PM_WKDEP_MPU);
+ preg(PM_WKDEP_CORE);
+ preg(PM_WKDEP_GFX);
+ preg(PM_WKDEP_DSP);
+ preg(PM_WKDEP_MDM);
+
+ preg(CM_FCLKEN_WKUP);
+ preg(CM_ICLKEN_WKUP);
+ preg(CM_IDLEST_WKUP);
+ preg(CM_AUTOIDLE_WKUP);
+ preg(CM_CLKSEL_WKUP);
+
+ preg(PM_WKEN_WKUP);
+ preg(PM_WKST_WKUP);
+}
+
+static inline void omap2_pm_save_registers(void)
+{
+ /* Save interrupt registers */
+ OMAP24XX_SAVE(INTC_MIR0);
+ OMAP24XX_SAVE(INTC_MIR1);
+ OMAP24XX_SAVE(INTC_MIR2);
+
+ /* Save power control registers */
+ OMAP24XX_SAVE(CM_CLKSTCTRL_MPU);
+ OMAP24XX_SAVE(CM_CLKSTCTRL_CORE);
+ OMAP24XX_SAVE(CM_CLKSTCTRL_GFX);
+ OMAP24XX_SAVE(CM_CLKSTCTRL_DSP);
+ OMAP24XX_SAVE(CM_CLKSTCTRL_MDM);
+
+ /* Save power state registers */
+ OMAP24XX_SAVE(PM_PWSTCTRL_MPU);
+ OMAP24XX_SAVE(PM_PWSTCTRL_CORE);
+ OMAP24XX_SAVE(PM_PWSTCTRL_GFX);
+ OMAP24XX_SAVE(PM_PWSTCTRL_DSP);
+ OMAP24XX_SAVE(PM_PWSTCTRL_MDM);
+
+ /* Save autoidle registers */
+ OMAP24XX_SAVE(CM_AUTOIDLE1_CORE);
+ OMAP24XX_SAVE(CM_AUTOIDLE2_CORE);
+ OMAP24XX_SAVE(CM_AUTOIDLE3_CORE);
+ OMAP24XX_SAVE(CM_AUTOIDLE4_CORE);
+ OMAP24XX_SAVE(CM_AUTOIDLE_WKUP);
+ OMAP24XX_SAVE(CM_AUTOIDLE_PLL);
+ OMAP24XX_SAVE(CM_AUTOIDLE_DSP);
+ OMAP24XX_SAVE(CM_AUTOIDLE_MDM);
+
+ /* Save idle state registers */
+ OMAP24XX_SAVE(CM_IDLEST1_CORE);
+ OMAP24XX_SAVE(CM_IDLEST2_CORE);
+ OMAP24XX_SAVE(CM_IDLEST3_CORE);
+ OMAP24XX_SAVE(CM_IDLEST4_CORE);
+ OMAP24XX_SAVE(CM_IDLEST_GFX);
+ OMAP24XX_SAVE(CM_IDLEST_WKUP);
+ OMAP24XX_SAVE(CM_IDLEST_CKGEN);
+ OMAP24XX_SAVE(CM_IDLEST_DSP);
+ OMAP24XX_SAVE(CM_IDLEST_MDM);
+
+ /* Save clock registers */
+ OMAP24XX_SAVE(CM_FCLKEN1_CORE);
+ OMAP24XX_SAVE(CM_FCLKEN2_CORE);
+ OMAP24XX_SAVE(CM_ICLKEN1_CORE);
+ OMAP24XX_SAVE(CM_ICLKEN2_CORE);
+ OMAP24XX_SAVE(CM_ICLKEN3_CORE);
+ OMAP24XX_SAVE(CM_ICLKEN4_CORE);
+}
+
+static inline void omap2_pm_restore_registers(void)
+{
+ /* Restore clock state registers */
+ OMAP24XX_RESTORE(CM_CLKSTCTRL_MPU);
+ OMAP24XX_RESTORE(CM_CLKSTCTRL_CORE);
+ OMAP24XX_RESTORE(CM_CLKSTCTRL_GFX);
+ OMAP24XX_RESTORE(CM_CLKSTCTRL_DSP);
+ OMAP24XX_RESTORE(CM_CLKSTCTRL_MDM);
+
+ /* Restore power state registers */
+ OMAP24XX_RESTORE(PM_PWSTCTRL_MPU);
+ OMAP24XX_RESTORE(PM_PWSTCTRL_CORE);
+ OMAP24XX_RESTORE(PM_PWSTCTRL_GFX);
+ OMAP24XX_RESTORE(PM_PWSTCTRL_DSP);
+ OMAP24XX_RESTORE(PM_PWSTCTRL_MDM);
+
+ /* Restore idle state registers */
+ OMAP24XX_RESTORE(CM_IDLEST1_CORE);
+ OMAP24XX_RESTORE(CM_IDLEST2_CORE);
+ OMAP24XX_RESTORE(CM_IDLEST3_CORE);
+ OMAP24XX_RESTORE(CM_IDLEST4_CORE);
+ OMAP24XX_RESTORE(CM_IDLEST_GFX);
+ OMAP24XX_RESTORE(CM_IDLEST_WKUP);
+ OMAP24XX_RESTORE(CM_IDLEST_CKGEN);
+ OMAP24XX_RESTORE(CM_IDLEST_DSP);
+ OMAP24XX_RESTORE(CM_IDLEST_MDM);
+
+ /* Restore autoidle registers */
+ OMAP24XX_RESTORE(CM_AUTOIDLE1_CORE);
+ OMAP24XX_RESTORE(CM_AUTOIDLE2_CORE);
+ OMAP24XX_RESTORE(CM_AUTOIDLE3_CORE);
+ OMAP24XX_RESTORE(CM_AUTOIDLE4_CORE);
+ OMAP24XX_RESTORE(CM_AUTOIDLE_WKUP);
+ OMAP24XX_RESTORE(CM_AUTOIDLE_PLL);
+ OMAP24XX_RESTORE(CM_AUTOIDLE_DSP);
+ OMAP24XX_RESTORE(CM_AUTOIDLE_MDM);
+
+ /* Restore clock registers */
+ OMAP24XX_RESTORE(CM_FCLKEN1_CORE);
+ OMAP24XX_RESTORE(CM_FCLKEN2_CORE);
+ OMAP24XX_RESTORE(CM_ICLKEN1_CORE);
+ OMAP24XX_RESTORE(CM_ICLKEN2_CORE);
+ OMAP24XX_RESTORE(CM_ICLKEN3_CORE);
+ OMAP24XX_RESTORE(CM_ICLKEN4_CORE);
+
+ /* REVISIT: Clear interrupts here */
+
+ /* Restore interrupt registers */
+ OMAP24XX_RESTORE(INTC_MIR0);
+ OMAP24XX_RESTORE(INTC_MIR1);
+ OMAP24XX_RESTORE(INTC_MIR2);
+}
+
+static int omap2_pm_suspend(void)
+{
+ int processor_type = 0;
+
+ /* REVISIT: 0x21 or 0x26? */
+ if (cpu_is_omap2420())
+ processor_type = 0x21;
+
+ if (!processor_type)
+ return -ENOTSUPP;
+
+ local_irq_disable();
+ local_fiq_disable();
+
+ omap2_pm_save_registers();
+
+ /* Disable interrupts except for the wake events */
+ INTC_MIR_SET0 = 0xffffffff & ~INT0_WAKE_MASK;
+ INTC_MIR_SET1 = 0xffffffff & ~INT1_WAKE_MASK;
+ INTC_MIR_SET2 = 0xffffffff & ~INT2_WAKE_MASK;
+
+ pmdomain_set_autoidle();
+
+ /* Clear old wake-up events */
+ PM_WKST1_CORE = 0;
+ PM_WKST2_CORE = 0;
+ PM_WKST_WKUP = 0;
+
+ /* Enable wake-up events */
+ PM_WKEN1_CORE = (1 << 22) | (1 << 21); /* UART1 & 2 */
+ PM_WKEN2_CORE = (1 << 2); /* UART3 */
+ PM_WKEN_WKUP = (1 << 2) | (1 << 0); /* GPIO & GPT1 */
+
+ /* Disable clocks except for CM_ICLKEN2_CORE. It gets disabled
+ * in the SRAM suspend code */
+ CM_FCLKEN1_CORE = 0;
+ CM_FCLKEN2_CORE = 0;
+ CM_ICLKEN1_CORE = 0;
+ CM_ICLKEN3_CORE = 0;
+ CM_ICLKEN4_CORE = 0;
+
+ omap2_pm_debug("Status before suspend");
+
+ /* Must wait for serial buffers to clear */
+ mdelay(200);
+
+ /* Jump to SRAM suspend code
+ * REVISIT: When is this SDRC_DLLB_CTRL?
+ */
+ omap2_sram_suspend(SDRC_DLLA_CTRL, processor_type);
+
+ /* Back from sleep */
+ omap2_pm_restore_registers();
+
+ local_fiq_enable();
+ local_irq_enable();
+
+ return 0;
+}
+
static int omap2_pm_enter(suspend_state_t state)
{
+ int ret = 0;
+
switch (state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
- /* FIXME: Add suspend */
+ ret = omap2_pm_suspend();
break;
-
case PM_SUSPEND_DISK:
- return -ENOTSUPP;
-
+ ret = -ENOTSUPP;
+ break;
default:
- return -EINVAL;
+ ret = -EINVAL;
}
- return 0;
+ return ret;
}
static int omap2_pm_finish(suspend_state_t state)
@@ -143,6 +400,8 @@
pm_set_ops(&omap_pm_ops);
pm_idle = omap2_pm_idle;
+ pmdomain_init();
+
return 0;
}
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 1d2f5ac..cf78e6c 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -6,6 +6,7 @@
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
* Juha Yrjölä <juha.yrjola@nokia.com>
+ * OMAP Dual-mode timer framework support by Timo Teras
*
* Some parts based off of TI's 24xx code:
*
@@ -22,54 +23,18 @@
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/delay.h>
#include <asm/mach/time.h>
-#include <asm/delay.h>
-#include <asm/io.h>
+#include <asm/arch/dmtimer.h>
-#define OMAP2_GP_TIMER1_BASE 0x48028000
-#define OMAP2_GP_TIMER2_BASE 0x4802a000
-#define OMAP2_GP_TIMER3_BASE 0x48078000
-#define OMAP2_GP_TIMER4_BASE 0x4807a000
+static struct omap_dm_timer *gptimer;
-#define GP_TIMER_TIDR 0x00
-#define GP_TIMER_TISR 0x18
-#define GP_TIMER_TIER 0x1c
-#define GP_TIMER_TCLR 0x24
-#define GP_TIMER_TCRR 0x28
-#define GP_TIMER_TLDR 0x2c
-#define GP_TIMER_TSICR 0x40
-
-#define OS_TIMER_NR 1 /* GP timer 2 */
-
-static unsigned long timer_base[] = {
- IO_ADDRESS(OMAP2_GP_TIMER1_BASE),
- IO_ADDRESS(OMAP2_GP_TIMER2_BASE),
- IO_ADDRESS(OMAP2_GP_TIMER3_BASE),
- IO_ADDRESS(OMAP2_GP_TIMER4_BASE),
-};
-
-static inline unsigned int timer_read_reg(int nr, unsigned int reg)
+static inline void omap2_gp_timer_start(unsigned long load_val)
{
- return __raw_readl(timer_base[nr] + reg);
-}
-
-static inline void timer_write_reg(int nr, unsigned int reg, unsigned int val)
-{
- __raw_writel(val, timer_base[nr] + reg);
-}
-
-/* Note that we always enable the clock prescale divider bit */
-static inline void omap2_gp_timer_start(int nr, unsigned long load_val)
-{
- unsigned int tmp;
-
- tmp = 0xffffffff - load_val;
-
- timer_write_reg(nr, GP_TIMER_TLDR, tmp);
- timer_write_reg(nr, GP_TIMER_TCRR, tmp);
- timer_write_reg(nr, GP_TIMER_TIER, 1 << 1);
- timer_write_reg(nr, GP_TIMER_TCLR, (1 << 5) | (1 << 1) | 1);
+ omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
+ omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
+ omap_dm_timer_start(gptimer);
}
static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id,
@@ -77,7 +42,7 @@
{
write_seqlock(&xtime_lock);
- timer_write_reg(OS_TIMER_NR, GP_TIMER_TISR, 1 << 1);
+ omap_dm_timer_write_status(gptimer, OMAP_TIMER_INT_OVERFLOW);
timer_tick(regs);
write_sequnlock(&xtime_lock);
@@ -87,41 +52,26 @@
static struct irqaction omap2_gp_timer_irq = {
.name = "gp timer",
- .flags = SA_INTERRUPT,
+ .flags = SA_INTERRUPT | SA_TIMER,
.handler = omap2_gp_timer_interrupt,
};
static void __init omap2_gp_timer_init(void)
{
- struct clk * sys_ck;
- u32 tick_period = 120000;
- u32 l;
+ u32 tick_period;
- /* Reset clock and prescale value */
- timer_write_reg(OS_TIMER_NR, GP_TIMER_TCLR, 0);
+ omap_dm_timer_init();
+ gptimer = omap_dm_timer_request_specific(1);
+ BUG_ON(gptimer == NULL);
- sys_ck = clk_get(NULL, "sys_ck");
- if (IS_ERR(sys_ck))
- printk(KERN_ERR "Could not get sys_ck\n");
- else {
- clk_enable(sys_ck);
- tick_period = clk_get_rate(sys_ck) / 100;
- clk_put(sys_ck);
- }
-
- tick_period /= 2; /* Minimum prescale divider is 2 */
+ omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
+ tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / 100;
tick_period -= 1;
- l = timer_read_reg(OS_TIMER_NR, GP_TIMER_TIDR);
- printk(KERN_INFO "OMAP2 GP timer (HW version %d.%d)\n",
- (l >> 4) & 0x0f, l & 0x0f);
-
- setup_irq(38, &omap2_gp_timer_irq);
-
- omap2_gp_timer_start(OS_TIMER_NR, tick_period);
+ setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
+ omap2_gp_timer_start(tick_period);
}
struct sys_timer omap_timer = {
.init = omap2_gp_timer_init,
};
-
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index ea5137f..03d07ca 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -35,6 +35,10 @@
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
+config MACH_TRIZEPS4
+ bool "Keith und Koep Trizeps4 DIMM-Module"
+ select PXA27x
+
endchoice
if PXA_SHARPSL
@@ -55,6 +59,21 @@
endif
+if MACH_TRIZEPS4
+
+choice
+ prompt "Select base board for Trizeps 4 module"
+
+config MACH_TRIZEPS4_CONXS
+ bool "ConXS Eval Board"
+
+config MACH_TRIZEPS4_ANY
+ bool "another Board"
+
+endchoice
+
+endif
+
endmenu
config MACH_POODLE
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 1610690..9093eb1c9 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -12,6 +12,7 @@
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
+obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o
@@ -23,6 +24,7 @@
led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
+led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
obj-$(CONFIG_LEDS) += $(led-y)
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
new file mode 100644
index 0000000..14cfc85
--- /dev/null
+++ b/arch/arm/mach-pxa/leds-trizeps4.c
@@ -0,0 +1,134 @@
+/*
+ * linux/arch/arm/mach-pxa/leds-trizeps4.c
+ *
+ * Author: Jürgen Schindele
+ * Created: 20 02, 2006
+ * Copyright: Jürgen Schindele
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/system.h>
+#include <asm/types.h>
+#include <asm/leds.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/trizeps4.h>
+
+#include "leds.h"
+
+#define LED_STATE_ENABLED 1
+#define LED_STATE_CLAIMED 2
+
+#define SYS_BUSY 0x01
+#define HEARTBEAT 0x02
+#define BLINK 0x04
+
+static unsigned int led_state;
+static unsigned int hw_led_state;
+
+void trizeps4_leds_event(led_event_t evt)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ switch (evt) {
+ case led_start:
+ hw_led_state = 0;
+ pxa_gpio_mode( GPIO_SYS_BUSY_LED | GPIO_OUT); /* LED1 */
+ pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT); /* LED2 */
+ led_state = LED_STATE_ENABLED;
+ break;
+
+ case led_stop:
+ led_state &= ~LED_STATE_ENABLED;
+ break;
+
+ case led_claim:
+ led_state |= LED_STATE_CLAIMED;
+ hw_led_state = 0;
+ break;
+
+ case led_release:
+ led_state &= ~LED_STATE_CLAIMED;
+ hw_led_state = 0;
+ break;
+
+#ifdef CONFIG_LEDS_TIMER
+ case led_timer:
+ hw_led_state ^= HEARTBEAT;
+ break;
+#endif
+
+#ifdef CONFIG_LEDS_CPU
+ case led_idle_start:
+ hw_led_state &= ~SYS_BUSY;
+ break;
+
+ case led_idle_end:
+ hw_led_state |= SYS_BUSY;
+ break;
+#endif
+
+ case led_halted:
+ break;
+
+ case led_green_on:
+ hw_led_state |= BLINK;
+ break;
+
+ case led_green_off:
+ hw_led_state &= ~BLINK;
+ break;
+
+ case led_amber_on:
+ break;
+
+ case led_amber_off:
+ break;
+
+ case led_red_on:
+ break;
+
+ case led_red_off:
+ break;
+
+ default:
+ break;
+ }
+
+ if (led_state & LED_STATE_ENABLED) {
+ switch (hw_led_state) {
+ case 0:
+ GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
+ GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+ break;
+ case 1:
+ GPCR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
+ GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+ break;
+ case 2:
+ GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
+ GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+ break;
+ case 3:
+ GPCR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
+ GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+ break;
+ }
+ }
+ else {
+ /* turn all off */
+ GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
+ GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+ }
+
+ local_irq_restore(flags);
+}
diff --git a/arch/arm/mach-pxa/leds.c b/arch/arm/mach-pxa/leds.c
index bbe4d5f..e13eb84 100644
--- a/arch/arm/mach-pxa/leds.c
+++ b/arch/arm/mach-pxa/leds.c
@@ -24,6 +24,8 @@
leds_event = mainstone_leds_event;
if (machine_is_pxa_idp())
leds_event = idp_leds_event;
+ if (machine_is_trizeps4())
+ leds_event = trizeps4_leds_event;
leds_event(led_start);
return 0;
diff --git a/arch/arm/mach-pxa/leds.h b/arch/arm/mach-pxa/leds.h
index d98f6e9..4f829b8 100644
--- a/arch/arm/mach-pxa/leds.h
+++ b/arch/arm/mach-pxa/leds.h
@@ -10,3 +10,4 @@
extern void idp_leds_event(led_event_t evt);
extern void lubbock_leds_event(led_event_t evt);
extern void mainstone_leds_event(led_event_t evt);
+extern void trizeps4_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index ec0f43a..1a5f5c2 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -248,58 +248,137 @@
/* 5.7" TFT QVGA (LoLo display number 1) */
static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = {
- .pixclock = 100000,
- .xres = 240,
- .yres = 320,
+ .pixclock = 150000,
+ .xres = 320,
+ .yres = 240,
.bpp = 16,
- .hsync_len = 64,
- .left_margin = 0x27,
- .right_margin = 0x09,
- .vsync_len = 0x04,
+ .hsync_len = 0x14,
+ .left_margin = 0x28,
+ .right_margin = 0x0a,
+ .vsync_len = 0x02,
.upper_margin = 0x08,
.lower_margin = 0x14,
- .sync = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.lccr0 = 0x07800080,
- .lccr3 = 0x04400007,
+ .lccr3 = 0x00400000,
+ .pxafb_backlight_power = lpd270_backlight_power,
+};
+
+/* 12.1" TFT SVGA (LoLo display number 2) */
+static struct pxafb_mach_info sharp_lq121s1dg31 __initdata = {
+ .pixclock = 50000,
+ .xres = 800,
+ .yres = 600,
+ .bpp = 16,
+ .hsync_len = 0x05,
+ .left_margin = 0x52,
+ .right_margin = 0x05,
+ .vsync_len = 0x04,
+ .upper_margin = 0x14,
+ .lower_margin = 0x0a,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .lccr0 = 0x07800080,
+ .lccr3 = 0x00400000,
+ .pxafb_backlight_power = lpd270_backlight_power,
+};
+
+/* 3.6" TFT QVGA (LoLo display number 3) */
+static struct pxafb_mach_info sharp_lq036q1da01 __initdata = {
+ .pixclock = 150000,
+ .xres = 320,
+ .yres = 240,
+ .bpp = 16,
+ .hsync_len = 0x0e,
+ .left_margin = 0x04,
+ .right_margin = 0x0a,
+ .vsync_len = 0x03,
+ .upper_margin = 0x03,
+ .lower_margin = 0x03,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .lccr0 = 0x07800080,
+ .lccr3 = 0x00400000,
.pxafb_backlight_power = lpd270_backlight_power,
};
/* 6.4" TFT VGA (LoLo display number 5) */
static struct pxafb_mach_info sharp_lq64d343 __initdata = {
- .pixclock = 20000,
+ .pixclock = 25000,
.xres = 640,
.yres = 480,
.bpp = 16,
- .hsync_len = 49,
+ .hsync_len = 0x31,
.left_margin = 0x89,
.right_margin = 0x19,
- .vsync_len = 18,
+ .vsync_len = 0x12,
.upper_margin = 0x22,
- .lower_margin = 0,
+ .lower_margin = 0x00,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.lccr0 = 0x07800080,
- .lccr3 = 0x04400001,
+ .lccr3 = 0x00400000,
+ .pxafb_backlight_power = lpd270_backlight_power,
+};
+
+/* 10.4" TFT VGA (LoLo display number 7) */
+static struct pxafb_mach_info sharp_lq10d368 __initdata = {
+ .pixclock = 25000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 0x31,
+ .left_margin = 0x89,
+ .right_margin = 0x19,
+ .vsync_len = 0x12,
+ .upper_margin = 0x22,
+ .lower_margin = 0x00,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .lccr0 = 0x07800080,
+ .lccr3 = 0x00400000,
.pxafb_backlight_power = lpd270_backlight_power,
};
/* 3.5" TFT QVGA (LoLo display number 8) */
static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = {
- .pixclock = 100000,
+ .pixclock = 150000,
.xres = 240,
.yres = 320,
.bpp = 16,
- .hsync_len = 0x34,
- .left_margin = 0x09,
- .right_margin = 0x09,
- .vsync_len = 0x08,
+ .hsync_len = 0x0e,
+ .left_margin = 0x0a,
+ .right_margin = 0x0a,
+ .vsync_len = 0x03,
.upper_margin = 0x05,
.lower_margin = 0x14,
- .sync = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.lccr0 = 0x07800080,
- .lccr3 = 0x04400007,
+ .lccr3 = 0x00400000,
.pxafb_backlight_power = lpd270_backlight_power,
};
+static struct pxafb_mach_info *lpd270_lcd_to_use;
+
+static int __init lpd270_set_lcd(char *str)
+{
+ if (!strnicmp(str, "lq057q3dc02", 11)) {
+ lpd270_lcd_to_use = &sharp_lq057q3dc02;
+ } else if (!strnicmp(str, "lq121s1dg31", 11)) {
+ lpd270_lcd_to_use = &sharp_lq121s1dg31;
+ } else if (!strnicmp(str, "lq036q1da01", 11)) {
+ lpd270_lcd_to_use = &sharp_lq036q1da01;
+ } else if (!strnicmp(str, "lq64d343", 8)) {
+ lpd270_lcd_to_use = &sharp_lq64d343;
+ } else if (!strnicmp(str, "lq10d368", 8)) {
+ lpd270_lcd_to_use = &sharp_lq10d368;
+ } else if (!strnicmp(str, "lq035q7db02-20", 14)) {
+ lpd270_lcd_to_use = &sharp_lq035q7db02_20;
+ } else {
+ printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
+ }
+
+ return 1;
+}
+
+__setup("lcd=", lpd270_set_lcd);
+
static struct platform_device *platform_devices[] __initdata = {
&smc91x_device,
&lpd270_audio_device,
@@ -345,9 +424,8 @@
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
- // set_pxa_fb_info(&sharp_lq057q3dc02);
- set_pxa_fb_info(&sharp_lq64d343);
- // set_pxa_fb_info(&sharp_lq035q7db02_20);
+ if (lpd270_lcd_to_use != NULL)
+ set_pxa_fb_info(lpd270_lcd_to_use);
pxa_set_ohci_info(&lpd270_ohci_platform_data);
}
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
new file mode 100644
index 0000000..4ffff9e
--- /dev/null
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -0,0 +1,471 @@
+/*
+ * linux/arch/arm/mach-pxa/trizeps4.c
+ *
+ * Support for the Keith und Koep Trizeps4 Module Platform.
+ *
+ * Author: Jürgen Schindele
+ * Created: 20 02, 2006
+ * Copyright: Jürgen Schindele
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/trizeps4.h>
+#include <asm/arch/audio.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/ohci.h>
+
+#include "generic.h"
+
+/********************************************************************************************
+ * ONBOARD FLASH
+ ********************************************************************************************/
+static struct mtd_partition trizeps4_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },{
+ .name = "Kernel",
+ .size = 0x00400000,
+ .offset = 0x00040000
+ },{
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00440000
+ }
+};
+
+static struct flash_platform_data trizeps4_flash_data[] = {
+ {
+ .map_name = "cfi_probe",
+ .parts = trizeps4_partitions,
+ .nr_parts = ARRAY_SIZE(trizeps4_partitions)
+ }
+};
+
+static struct resource flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "pxa2xx-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &trizeps4_flash_data,
+ },
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+/********************************************************************************************
+ * DAVICOM DM9000 Ethernet
+ ********************************************************************************************/
+static struct resource dm9000_resources[] = {
+ [0] = {
+ .start = TRIZEPS4_ETH_PHYS+0x300,
+ .end = TRIZEPS4_ETH_PHYS+0x400-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = TRIZEPS4_ETH_PHYS+0x8300,
+ .end = TRIZEPS4_ETH_PHYS+0x8400-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = TRIZEPS4_ETH_IRQ,
+ .end = TRIZEPS4_ETH_IRQ,
+ .flags = (IORESOURCE_IRQ | IRQT_RISING),
+ },
+};
+
+static struct platform_device dm9000_device = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+ .resource = dm9000_resources,
+};
+
+/********************************************************************************************
+ * PXA270 serial ports
+ ********************************************************************************************/
+static struct plat_serial8250_port tri_serial_ports[] = {
+#ifdef CONFIG_SERIAL_PXA
+ /* this uses the own PXA driver */
+ {
+ 0,
+ },
+#else
+ /* this uses the generic 8520 driver */
+ [0] = {
+ .membase = (void *)&FFUART,
+ .irq = IRQ_FFUART,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM32,
+ .regshift = 2,
+ .uartclk = (921600*16),
+ },
+ [1] = {
+ .membase = (void *)&BTUART,
+ .irq = IRQ_BTUART,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM32,
+ .regshift = 2,
+ .uartclk = (921600*16),
+ },
+ {
+ 0,
+ },
+#endif
+};
+
+static struct platform_device uart_devices = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = tri_serial_ports,
+ },
+ .num_resources = 0,
+ .resource = NULL,
+};
+
+/********************************************************************************************
+ * PXA270 ac97 sound codec
+ ********************************************************************************************/
+static struct platform_device ac97_audio_device = {
+ .name = "pxa2xx-ac97",
+ .id = -1,
+};
+
+static struct platform_device * trizeps4_devices[] __initdata = {
+ &flash_device,
+ &uart_devices,
+ &dm9000_device,
+ &ac97_audio_device,
+};
+
+#ifdef CONFIG_MACH_TRIZEPS4_CONXS
+static short trizeps_conxs_bcr;
+
+/* PCCARD power switching supports only 3,3V */
+void board_pcmcia_power(int power)
+{
+ if (power) {
+ /* switch power on, put in reset and enable buffers */
+ trizeps_conxs_bcr |= power;
+ trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
+ trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN);
+ ConXS_BCR = trizeps_conxs_bcr;
+ /* wait a little */
+ udelay(2000);
+ /* take reset away */
+ trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET);
+ ConXS_BCR = trizeps_conxs_bcr;
+ udelay(2000);
+ } else {
+ /* put in reset */
+ trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
+ ConXS_BCR = trizeps_conxs_bcr;
+ udelay(1000);
+ /* switch power off */
+ trizeps_conxs_bcr &= ~(0xf);
+ ConXS_BCR = trizeps_conxs_bcr;
+
+ }
+ pr_debug("%s: o%s 0x%x\n", __FUNCTION__, power ? "n": "ff", trizeps_conxs_bcr);
+}
+
+/* backlight power switching for LCD panel */
+static void board_backlight_power(int on)
+{
+ if (on) {
+ trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
+ } else {
+ trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
+ }
+ pr_debug("%s: o%s 0x%x\n", __FUNCTION__, on ? "n" : "ff", trizeps_conxs_bcr);
+ ConXS_BCR = trizeps_conxs_bcr;
+}
+
+/* Powersupply for MMC/SD cardslot */
+static void board_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data* p_d = dev->platform_data;
+
+ if (( 1 << vdd) & p_d->ocr_mask) {
+ pr_debug("%s: on\n", __FUNCTION__);
+ /* FIXME fill in values here */
+ } else {
+ pr_debug("%s: off\n", __FUNCTION__);
+ /* FIXME fill in values here */
+ }
+}
+
+static short trizeps_conxs_ircr;
+
+/* Switch modes and Power for IRDA receiver */
+static void board_irda_mode(struct device *dev, int mode)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (mode & IR_SIRMODE) {
+ /* Slow mode */
+ trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;
+ } else if (mode & IR_FIRMODE) {
+ /* Fast mode */
+ trizeps_conxs_ircr |= ConXS_IRCR_MODE;
+ }
+ if (mode & IR_OFF) {
+ trizeps_conxs_ircr |= ConXS_IRCR_SD;
+ } else {
+ trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+ }
+ /* FIXME write values to register */
+ local_irq_restore(flags);
+}
+
+#else
+/* for other baseboards define dummies */
+void board_pcmcia_power(int power) {;}
+#define board_backlight_power NULL
+#define board_mci_power NULL
+#define board_irda_mode NULL
+
+#endif /* CONFIG_MACH_TRIZEPS4_CONXS */
+EXPORT_SYMBOL(board_pcmcia_power);
+
+static int trizeps4_mci_init(struct device *dev, irqreturn_t (*mci_detect_int)(int, void *, struct pt_regs *), void *data)
+{
+ int err;
+ /* setup GPIO for PXA27x MMC controller */
+ pxa_gpio_mode(GPIO32_MMCCLK_MD);
+ pxa_gpio_mode(GPIO112_MMCCMD_MD);
+ pxa_gpio_mode(GPIO92_MMCDAT0_MD);
+ pxa_gpio_mode(GPIO109_MMCDAT1_MD);
+ pxa_gpio_mode(GPIO110_MMCDAT2_MD);
+ pxa_gpio_mode(GPIO111_MMCDAT3_MD);
+
+ pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
+
+ err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int, SA_INTERRUPT | SA_TRIGGER_RISING, "MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+ return -1;
+ }
+ return 0;
+}
+
+static void trizeps4_mci_exit(struct device *dev, void *data)
+{
+ free_irq(TRIZEPS4_MMC_IRQ, data);
+}
+
+static struct pxamci_platform_data trizeps4_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = trizeps4_mci_init,
+ .exit = trizeps4_mci_exit,
+ .setpower = board_mci_power,
+};
+
+static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = board_irda_mode,
+};
+
+static int trizeps4_ohci_init(struct device *dev)
+{
+ /* setup Port1 GPIO pin. */
+ pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */
+ pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
+
+ /* Set the Power Control Polarity Low and Power Sense
+ Polarity Low to active low. */
+ UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
+ ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+
+ return 0;
+}
+
+static void trizeps4_ohci_exit(struct device *dev)
+{
+ ;
+}
+
+static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .init = trizeps4_ohci_init,
+ .exit = trizeps4_ohci_exit,
+};
+
+static struct map_desc trizeps4_io_desc[] __initdata = {
+ { /* ConXS CFSR */
+ .virtual = TRIZEPS4_CFSR_VIRT,
+ .pfn = __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
+ .length = 0x00001000,
+ .type = MT_DEVICE
+ },
+ { /* ConXS BCR */
+ .virtual = TRIZEPS4_BOCR_VIRT,
+ .pfn = __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
+ .length = 0x00001000,
+ .type = MT_DEVICE
+ },
+ { /* ConXS IRCR */
+ .virtual = TRIZEPS4_IRCR_VIRT,
+ .pfn = __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
+ .length = 0x00001000,
+ .type = MT_DEVICE
+ },
+ { /* ConXS DCR */
+ .virtual = TRIZEPS4_DICR_VIRT,
+ .pfn = __phys_to_pfn(TRIZEPS4_DICR_PHYS),
+ .length = 0x00001000,
+ .type = MT_DEVICE
+ },
+ { /* ConXS UPSR */
+ .virtual = TRIZEPS4_UPSR_VIRT,
+ .pfn = __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
+ .length = 0x00001000,
+ .type = MT_DEVICE
+ }
+};
+
+static struct pxafb_mach_info sharp_lcd __initdata = {
+ .pixclock = 78000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 8,
+ .hsync_len = 4,
+ .left_margin = 4,
+ .right_margin = 4,
+ .vsync_len = 2,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .cmap_greyscale = 0,
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .lccr0 = LCCR0_Color | LCCR0_Pas | LCCR0_Dual,
+ .lccr3 = 0x0340ff02,
+ .pxafb_backlight_power = board_backlight_power,
+};
+
+static void __init trizeps4_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+}
+
+static void __init trizeps4_init(void)
+{
+ platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
+
+ set_pxa_fb_info(&sharp_lcd);
+
+ pxa_set_mci_info(&trizeps4_mci_platform_data);
+ pxa_set_ficp_info(&trizeps4_ficp_platform_data);
+ pxa_set_ohci_info(&trizeps4_ohci_platform_data);
+}
+
+static void __init trizeps4_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
+
+ /* for DiskOnChip */
+ pxa_gpio_mode(GPIO15_nCS_1_MD);
+
+ /* for off-module PIC on ConXS board */
+ pxa_gpio_mode(GPIO_PIC | GPIO_IN);
+
+ /* UCB1400 irq */
+ pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN);
+
+ /* for DM9000 LAN */
+ pxa_gpio_mode(GPIO78_nCS_2_MD);
+ pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
+
+ /* for PCMCIA device */
+ pxa_gpio_mode(GPIO_PCD | GPIO_IN);
+ pxa_gpio_mode(GPIO_PRDY | GPIO_IN);
+
+ /* for I2C adapter */
+ pxa_gpio_mode(GPIO117_I2CSCL_MD);
+ pxa_gpio_mode(GPIO118_I2CSDA_MD);
+
+ /* MMC_DET s.o. */
+ pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
+
+ /* whats that for ??? */
+ pxa_gpio_mode(GPIO79_nCS_3_MD);
+
+ pxa_gpio_mode( GPIO_SYS_BUSY_LED | GPIO_OUT); /* LED1 */
+ pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT); /* LED2 */
+
+#ifdef CONFIG_MACH_TRIZEPS4_CONXS
+#ifdef CONFIG_IDE_PXA_CF
+ /* if boot direct from compact flash dont disable power */
+ trizeps_conxs_bcr = 0x0009;
+#else
+ /* this is the reset value */
+ trizeps_conxs_bcr = 0x00A0;
+#endif
+ ConXS_BCR = trizeps_conxs_bcr;
+#endif
+
+ PWER = 0x00000002;
+ PFER = 0x00000000;
+ PRER = 0x00000002;
+ PGSR0 = 0x0158C000;
+ PGSR1 = 0x00FF0080;
+ PGSR2 = 0x0001C004;
+ /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
+ PCFR |= PCFR_OPDE;
+}
+
+MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
+ /* MAINTAINER("Jürgen Schindele") */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = TRIZEPS4_SDRAM_BASE + 0x100,
+ .fixup = trizeps4_fixup,
+ .init_machine = trizeps4_init,
+ .map_io = trizeps4_map_io,
+ .init_irq = pxa_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index 04c94ab..6395977 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -15,7 +15,10 @@
* SDRAM reads (rev A0, B0, B1)
*
* We ignore rev. A0 and B0 devices; I don't think they're worth supporting.
+ *
+ * The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type
*/
+#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
@@ -35,6 +38,7 @@
static struct cpufreq_driver sa1110_driver;
struct sdram_params {
+ const char name[16];
u_char rows; /* bits */
u_char cas_latency; /* cycles */
u_char tck; /* clock cycle time (ns) */
@@ -50,54 +54,53 @@
u_int mdcas[3];
};
-static struct sdram_params tc59sm716_cl2_params __initdata = {
- .rows = 12,
- .tck = 10,
- .trcd = 20,
- .trp = 20,
- .twr = 10,
- .refresh = 64000,
- .cas_latency = 2,
-};
-
-static struct sdram_params tc59sm716_cl3_params __initdata = {
- .rows = 12,
- .tck = 8,
- .trcd = 20,
- .trp = 20,
- .twr = 8,
- .refresh = 64000,
- .cas_latency = 3,
-};
-
-static struct sdram_params samsung_k4s641632d_tc75 __initdata = {
- .rows = 14,
- .tck = 9,
- .trcd = 27,
- .trp = 20,
- .twr = 9,
- .refresh = 64000,
- .cas_latency = 3,
-};
-
-static struct sdram_params samsung_km416s4030ct __initdata = {
- .rows = 13,
- .tck = 8,
- .trcd = 24, /* 3 CLKs */
- .trp = 24, /* 3 CLKs */
- .twr = 16, /* Trdl: 2 CLKs */
- .refresh = 64000,
- .cas_latency = 3,
-};
-
-static struct sdram_params wbond_w982516ah75l_cl3_params __initdata = {
- .rows = 16,
- .tck = 8,
- .trcd = 20,
- .trp = 20,
- .twr = 8,
- .refresh = 64000,
- .cas_latency = 3,
+static struct sdram_params sdram_tbl[] __initdata = {
+ { /* Toshiba TC59SM716 CL2 */
+ .name = "TC59SM716-CL2",
+ .rows = 12,
+ .tck = 10,
+ .trcd = 20,
+ .trp = 20,
+ .twr = 10,
+ .refresh = 64000,
+ .cas_latency = 2,
+ }, { /* Toshiba TC59SM716 CL3 */
+ .name = "TC59SM716-CL3",
+ .rows = 12,
+ .tck = 8,
+ .trcd = 20,
+ .trp = 20,
+ .twr = 8,
+ .refresh = 64000,
+ .cas_latency = 3,
+ }, { /* Samsung K4S641632D TC75 */
+ .name = "K4S641632D",
+ .rows = 14,
+ .tck = 9,
+ .trcd = 27,
+ .trp = 20,
+ .twr = 9,
+ .refresh = 64000,
+ .cas_latency = 3,
+ }, { /* Samsung KM416S4030CT */
+ .name = "KM416S4030CT",
+ .rows = 13,
+ .tck = 8,
+ .trcd = 24, /* 3 CLKs */
+ .trp = 24, /* 3 CLKs */
+ .twr = 16, /* Trdl: 2 CLKs */
+ .refresh = 64000,
+ .cas_latency = 3,
+ }, { /* Winbond W982516AH75L CL3 */
+ .name = "W982516AH75L",
+ .rows = 16,
+ .tck = 8,
+ .trcd = 20,
+ .trp = 20,
+ .twr = 8,
+ .refresh = 64000,
+ .cas_latency = 3,
+ },
};
static struct sdram_params sdram_params;
@@ -336,19 +339,36 @@
.name = "sa1110",
};
+static struct sdram_params *sa1110_find_sdram(const char *name)
+{
+ struct sdram_params *sdram;
+
+ for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl); sdram++)
+ if (strcmp(name, sdram->name) == 0)
+ return sdram;
+
+ return NULL;
+}
+
+static char sdram_name[16];
+
static int __init sa1110_clk_init(void)
{
- struct sdram_params *sdram = NULL;
+ struct sdram_params *sdram;
+ const char *name = sdram_name;
- if (machine_is_assabet())
- sdram = &tc59sm716_cl3_params;
+ if (!name[0]) {
+ if (machine_is_assabet())
+ name = "TC59SM716-CL3";
- if (machine_is_pt_system3())
- sdram = &samsung_k4s641632d_tc75;
+ if (machine_is_pt_system3())
+ name = "K4S641632D";
- if (machine_is_h3100())
- sdram = &samsung_km416s4030ct;
+ if (machine_is_h3100())
+ name = "KM416S4030CT";
+ }
+ sdram = sa1110_find_sdram(name);
if (sdram) {
printk(KERN_DEBUG "SDRAM: tck: %d trcd: %d trp: %d"
" twr: %d refresh: %d cas_latency: %d\n",
@@ -363,4 +383,5 @@
return 0;
}
+module_param_string(sdram, sdram_name, sizeof(sdram_name), 0);
arch_initcall(sa1110_clk_init);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c4bca75..5f80f18 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -121,8 +121,8 @@
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 7691cfd..7eac87f 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -27,7 +27,16 @@
#include <asm/cacheflush.h>
#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
+#include <asm/sizes.h>
+
+/*
+ * Used by ioremap() and iounmap() code to mark (super)section-mapped
+ * I/O regions in vm_struct->flags field.
+ */
+#define VM_ARM_SECTION_MAPPING 0x80000000
static inline void
remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
@@ -113,10 +122,168 @@
dir++;
} while (address && (address < end));
- flush_cache_vmap(start, end);
return err;
}
+
+void __check_kvm_seq(struct mm_struct *mm)
+{
+ unsigned int seq;
+
+ do {
+ seq = init_mm.context.kvm_seq;
+ memcpy(pgd_offset(mm, VMALLOC_START),
+ pgd_offset_k(VMALLOC_START),
+ sizeof(pgd_t) * (pgd_index(VMALLOC_END) -
+ pgd_index(VMALLOC_START)));
+ mm->context.kvm_seq = seq;
+ } while (seq != init_mm.context.kvm_seq);
+}
+
+#ifndef CONFIG_SMP
+/*
+ * Section support is unsafe on SMP - If you iounmap and ioremap a region,
+ * the other CPUs will not see this change until their next context switch.
+ * Meanwhile, (eg) if an interrupt comes in on one of those other CPUs
+ * which requires the new ioremap'd region to be referenced, the CPU will
+ * reference the _old_ region.
+ *
+ * Note that get_vm_area() allocates a guard 4K page, so we need to mask
+ * the size back to 1MB aligned or we will overflow in the loop below.
+ */
+static void unmap_area_sections(unsigned long virt, unsigned long size)
+{
+ unsigned long addr = virt, end = virt + (size & ~SZ_1M);
+ pgd_t *pgd;
+
+ flush_cache_vunmap(addr, end);
+ pgd = pgd_offset_k(addr);
+ do {
+ pmd_t pmd, *pmdp = pmd_offset(pgd, addr);
+
+ pmd = *pmdp;
+ if (!pmd_none(pmd)) {
+ /*
+ * Clear the PMD from the page table, and
+ * increment the kvm sequence so others
+ * notice this change.
+ *
+ * Note: this is still racy on SMP machines.
+ */
+ pmd_clear(pmdp);
+ init_mm.context.kvm_seq++;
+
+ /*
+ * Free the page table, if there was one.
+ */
+ if ((pmd_val(pmd) & PMD_TYPE_MASK) == PMD_TYPE_TABLE)
+ pte_free_kernel(pmd_page_kernel(pmd));
+ }
+
+ addr += PGDIR_SIZE;
+ pgd++;
+ } while (addr < end);
+
+ /*
+ * Ensure that the active_mm is up to date - we want to
+ * catch any use-after-iounmap cases.
+ */
+ if (current->active_mm->context.kvm_seq != init_mm.context.kvm_seq)
+ __check_kvm_seq(current->active_mm);
+
+ flush_tlb_kernel_range(virt, end);
+}
+
+static int
+remap_area_sections(unsigned long virt, unsigned long pfn,
+ unsigned long size, unsigned long flags)
+{
+ unsigned long prot, addr = virt, end = virt + size;
+ pgd_t *pgd;
+
+ /*
+ * Remove and free any PTE-based mapping, and
+ * sync the current kernel mapping.
+ */
+ unmap_area_sections(virt, size);
+
+ prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_DOMAIN(DOMAIN_IO) |
+ (flags & (L_PTE_CACHEABLE | L_PTE_BUFFERABLE));
+
+ /*
+ * ARMv6 and above need XN set to prevent speculative prefetches
+ * hitting IO.
+ */
+ if (cpu_architecture() >= CPU_ARCH_ARMv6)
+ prot |= PMD_SECT_XN;
+
+ pgd = pgd_offset_k(addr);
+ do {
+ pmd_t *pmd = pmd_offset(pgd, addr);
+
+ pmd[0] = __pmd(__pfn_to_phys(pfn) | prot);
+ pfn += SZ_1M >> PAGE_SHIFT;
+ pmd[1] = __pmd(__pfn_to_phys(pfn) | prot);
+ pfn += SZ_1M >> PAGE_SHIFT;
+ flush_pmd_entry(pmd);
+
+ addr += PGDIR_SIZE;
+ pgd++;
+ } while (addr < end);
+
+ return 0;
+}
+
+static int
+remap_area_supersections(unsigned long virt, unsigned long pfn,
+ unsigned long size, unsigned long flags)
+{
+ unsigned long prot, addr = virt, end = virt + size;
+ pgd_t *pgd;
+
+ /*
+ * Remove and free any PTE-based mapping, and
+ * sync the current kernel mapping.
+ */
+ unmap_area_sections(virt, size);
+
+ prot = PMD_TYPE_SECT | PMD_SECT_SUPER | PMD_SECT_AP_WRITE |
+ PMD_DOMAIN(DOMAIN_IO) |
+ (flags & (L_PTE_CACHEABLE | L_PTE_BUFFERABLE));
+
+ /*
+ * ARMv6 and above need XN set to prevent speculative prefetches
+ * hitting IO.
+ */
+ if (cpu_architecture() >= CPU_ARCH_ARMv6)
+ prot |= PMD_SECT_XN;
+
+ pgd = pgd_offset_k(virt);
+ do {
+ unsigned long super_pmd_val, i;
+
+ super_pmd_val = __pfn_to_phys(pfn) | prot;
+ super_pmd_val |= ((pfn >> (32 - PAGE_SHIFT)) & 0xf) << 20;
+
+ for (i = 0; i < 8; i++) {
+ pmd_t *pmd = pmd_offset(pgd, addr);
+
+ pmd[0] = __pmd(super_pmd_val);
+ pmd[1] = __pmd(super_pmd_val);
+ flush_pmd_entry(pmd);
+
+ addr += PGDIR_SIZE;
+ pgd++;
+ }
+
+ pfn += SUPERSECTION_SIZE >> PAGE_SHIFT;
+ } while (addr < end);
+
+ return 0;
+}
+#endif
+
+
/*
* Remap an arbitrary physical address space into the kernel virtual
* address space. Needed when the kernel wants to access high addresses
@@ -133,18 +300,42 @@
__ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
unsigned long flags)
{
+ int err;
unsigned long addr;
struct vm_struct * area;
+ unsigned int cr = get_cr();
+
+ /*
+ * High mappings must be supersection aligned
+ */
+ if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
+ return NULL;
area = get_vm_area(size, VM_IOREMAP);
if (!area)
return NULL;
addr = (unsigned long)area->addr;
- if (remap_area_pages(addr, pfn, size, flags)) {
+
+#ifndef CONFIG_SMP
+ if ((((cpu_architecture() >= CPU_ARCH_ARMv6) && (cr & CR_XP)) ||
+ cpu_is_xsc3()) &&
+ !((__pfn_to_phys(pfn) | size | addr) & ~SUPERSECTION_MASK)) {
+ area->flags |= VM_ARM_SECTION_MAPPING;
+ err = remap_area_supersections(addr, pfn, size, flags);
+ } else if (!((__pfn_to_phys(pfn) | size | addr) & ~PMD_MASK)) {
+ area->flags |= VM_ARM_SECTION_MAPPING;
+ err = remap_area_sections(addr, pfn, size, flags);
+ } else
+#endif
+ err = remap_area_pages(addr, pfn, size, flags);
+
+ if (err) {
vunmap((void *)addr);
return NULL;
}
- return (void __iomem *) (offset + (char *)addr);
+
+ flush_cache_vmap(addr, addr + size);
+ return (void __iomem *) (offset + addr);
}
EXPORT_SYMBOL(__ioremap_pfn);
@@ -173,6 +364,34 @@
void __iounmap(void __iomem *addr)
{
- vunmap((void *)(PAGE_MASK & (unsigned long)addr));
+ struct vm_struct **p, *tmp;
+ unsigned int section_mapping = 0;
+
+ addr = (void __iomem *)(PAGE_MASK & (unsigned long)addr);
+
+ /*
+ * If this is a section based mapping we need to handle it
+ * specially as the VM subysystem does not know how to handle
+ * such a beast. We need the lock here b/c we need to clear
+ * all the mappings before the area can be reclaimed
+ * by someone else.
+ */
+ write_lock(&vmlist_lock);
+ for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
+ if((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
+ if (tmp->flags & VM_ARM_SECTION_MAPPING) {
+ *p = tmp->next;
+ unmap_area_sections((unsigned long)tmp->addr,
+ tmp->size);
+ kfree(tmp);
+ section_mapping = 1;
+ }
+ break;
+ }
+ }
+ write_unlock(&vmlist_lock);
+
+ if (!section_mapping)
+ vunmap(addr);
}
EXPORT_SYMBOL(__iounmap);
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index b0242c6..38769f5 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -302,16 +302,16 @@
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_WRITE,
.prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PMD_TYPE_SECT | PMD_SECT_UNCACHED |
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED |
PMD_SECT_AP_WRITE,
.domain = DOMAIN_IO,
},
[MT_CACHECLEAN] = {
- .prot_sect = PMD_TYPE_SECT,
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4,
.domain = DOMAIN_KERNEL,
},
[MT_MINICLEAN] = {
- .prot_sect = PMD_TYPE_SECT | PMD_SECT_MINICACHE,
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_MINICACHE,
.domain = DOMAIN_KERNEL,
},
[MT_LOW_VECTORS] = {
@@ -327,25 +327,25 @@
.domain = DOMAIN_USER,
},
[MT_MEMORY] = {
- .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
},
[MT_ROM] = {
- .prot_sect = PMD_TYPE_SECT,
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4,
.domain = DOMAIN_KERNEL,
},
[MT_IXP2000_DEVICE] = { /* IXP2400 requires XCB=101 for on-chip I/O */
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_WRITE,
.prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PMD_TYPE_SECT | PMD_SECT_UNCACHED |
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED |
PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE |
PMD_SECT_TEX(1),
.domain = DOMAIN_IO,
},
[MT_NONSHARED_DEVICE] = {
.prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PMD_TYPE_SECT | PMD_SECT_NONSHARED_DEV |
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_NONSHARED_DEV |
PMD_SECT_AP_WRITE,
.domain = DOMAIN_IO,
}
@@ -375,14 +375,21 @@
ecc_mask = 0;
}
- if (cpu_arch <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) {
- for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
+ /*
+ * Xscale must not have PMD bit 4 set for section mappings.
+ */
+ if (cpu_is_xscale())
+ for (i = 0; i < ARRAY_SIZE(mem_types); i++)
+ mem_types[i].prot_sect &= ~PMD_BIT4;
+
+ /*
+ * ARMv5 and lower, excluding Xscale, bit 4 must be set for
+ * page tables.
+ */
+ if (cpu_arch < CPU_ARCH_ARMv6 && !cpu_is_xscale())
+ for (i = 0; i < ARRAY_SIZE(mem_types); i++)
if (mem_types[i].prot_l1)
mem_types[i].prot_l1 |= PMD_BIT4;
- if (mem_types[i].prot_sect)
- mem_types[i].prot_sect |= PMD_BIT4;
- }
- }
cp = &cache_policies[cachepolicy];
kern_pgprot = user_pgprot = cp->pte;
@@ -406,8 +413,8 @@
* bit 4 becomes XN which we must clear for the
* kernel memory mapping.
*/
- mem_types[MT_MEMORY].prot_sect &= ~PMD_BIT4;
- mem_types[MT_ROM].prot_sect &= ~PMD_BIT4;
+ mem_types[MT_MEMORY].prot_sect &= ~PMD_SECT_XN;
+ mem_types[MT_ROM].prot_sect &= ~PMD_SECT_XN;
/*
* Mark cache clean areas and XIP ROM read only
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index cc60966..700297a 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -439,11 +439,12 @@
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
+
+ adr r5, arm1020_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, arm1020_cr1_clear
bic r0, r0, r5
- ldr r5, arm1020_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
orr r0, r0, #0x4000 @ .R.. .... .... ....
#endif
@@ -455,12 +456,9 @@
* .RVI ZFRS BLDP WCAM
* .011 1001 ..11 0101
*/
- .type arm1020_cr1_clear, #object
- .type arm1020_cr1_set, #object
-arm1020_cr1_clear:
- .word 0x593f
-arm1020_cr1_set:
- .word 0x3935
+ .type arm1020_crval, #object
+arm1020_crval:
+ crval clear=0x0000593f, mmuset=0x00003935, ucset=0x00001930
__INITDATA
@@ -526,6 +524,9 @@
.long PMD_TYPE_SECT | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm1020_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 117a946..0c33a5e 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -421,11 +421,11 @@
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
+ adr r5, arm1020e_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, arm1020e_cr1_clear
bic r0, r0, r5
- ldr r5, arm1020e_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
orr r0, r0, #0x4000 @ .R.. .... .... ....
#endif
@@ -437,12 +437,9 @@
* .RVI ZFRS BLDP WCAM
* .011 1001 ..11 0101
*/
- .type arm1020e_cr1_clear, #object
- .type arm1020e_cr1_set, #object
-arm1020e_cr1_clear:
- .word 0x5f3f
-arm1020e_cr1_set:
- .word 0x3935
+ .type arm1020e_crval, #object
+arm1020e_crval:
+ crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
__INITDATA
@@ -476,25 +473,7 @@
.type cpu_arm1020e_name, #object
cpu_arm1020e_name:
- .ascii "ARM1020E"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- .ascii "i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- .ascii "d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- .ascii "(wt)"
-#else
- .ascii "(wb)"
-#endif
-#endif
-#ifndef CONFIG_CPU_BPREDICT_DISABLE
- .ascii "B"
-#endif
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
- .ascii "RR"
-#endif
- .ascii "\0"
+ .asciz "ARM1020E"
.size cpu_arm1020e_name, . - cpu_arm1020e_name
.align
@@ -509,6 +488,10 @@
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm1020e_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 39b7c10..566a556 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -403,11 +403,11 @@
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
+ adr r5, arm1022_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, arm1022_cr1_clear
bic r0, r0, r5
- ldr r5, arm1022_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
orr r0, r0, #0x4000 @ .R..............
#endif
@@ -420,12 +420,9 @@
* .011 1001 ..11 0101
*
*/
- .type arm1022_cr1_clear, #object
- .type arm1022_cr1_set, #object
-arm1022_cr1_clear:
- .word 0x7f3f
-arm1022_cr1_set:
- .word 0x3935
+ .type arm1022_crval, #object
+arm1022_crval:
+ crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
__INITDATA
@@ -459,25 +456,7 @@
.type cpu_arm1022_name, #object
cpu_arm1022_name:
- .ascii "arm1022"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- .ascii "i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- .ascii "d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- .ascii "(wt)"
-#else
- .ascii "(wb)"
-#endif
-#endif
-#ifndef CONFIG_CPU_BPREDICT_DISABLE
- .ascii "B"
-#endif
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
- .ascii "RR"
-#endif
- .ascii "\0"
+ .asciz "ARM1022"
.size cpu_arm1022_name, . - cpu_arm1022_name
.align
@@ -492,6 +471,10 @@
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm1022_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 33e1ab8..6ea7632 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -398,11 +398,11 @@
mov r0, #4 @ explicitly disable writeback
mcr p15, 7, r0, c15, c0, 0
#endif
+ adr r5, arm1026_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, arm1026_cr1_clear
bic r0, r0, r5
- ldr r5, arm1026_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
orr r0, r0, #0x4000 @ .R.. .... .... ....
#endif
@@ -415,12 +415,9 @@
* .011 1001 ..11 0101
*
*/
- .type arm1026_cr1_clear, #object
- .type arm1026_cr1_set, #object
-arm1026_cr1_clear:
- .word 0x7f3f
-arm1026_cr1_set:
- .word 0x3935
+ .type arm1026_crval, #object
+arm1026_crval:
+ crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001934
__INITDATA
@@ -455,25 +452,7 @@
.type cpu_arm1026_name, #object
cpu_arm1026_name:
- .ascii "ARM1026EJ-S"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- .ascii "i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- .ascii "d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- .ascii "(wt)"
-#else
- .ascii "(wb)"
-#endif
-#endif
-#ifndef CONFIG_CPU_BPREDICT_DISABLE
- .ascii "B"
-#endif
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
- .ascii "RR"
-#endif
- .ascii "\0"
+ .asciz "ARM1026EJ-S"
.size cpu_arm1026_name, . - cpu_arm1026_name
.align
@@ -488,6 +467,10 @@
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm1026_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 7a705ed..0432e48 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -355,6 +355,10 @@
.long 0x41560600
.long 0xfffffff0
.long 0x00000c1e
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm6_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -371,6 +375,10 @@
.long 0x41560610
.long 0xfffffff0
.long 0x00000c1e
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm6_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -387,6 +395,10 @@
.long 0x41007000
.long 0xffffff00
.long 0x00000c1e
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm7_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -408,6 +420,10 @@
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm7_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 8610246..0e6946a 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -169,11 +169,11 @@
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4)
#endif
+ adr r5, arm720_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register
- ldr r5, arm720_cr1_clear
bic r0, r0, r5
- ldr r5, arm720_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
mov pc, lr @ __ret (head.S)
.size __arm720_setup, . - __arm720_setup
@@ -183,12 +183,9 @@
* ..1. 1001 ..11 1101
*
*/
- .type arm720_cr1_clear, #object
- .type arm720_cr1_set, #object
-arm720_cr1_clear:
- .word 0x2f3f
-arm720_cr1_set:
- .word 0x213d
+ .type arm720_crval, #object
+arm720_crval:
+ crval clear=0x00002f3f, mmuset=0x0000213d, ucset=0x00000130
__INITDATA
@@ -246,6 +243,10 @@
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm710_setup @ cpu_flush
.long cpu_arch_name @ arch_name
.long cpu_elf_name @ elf_name
@@ -267,6 +268,10 @@
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm720_setup @ cpu_flush
.long cpu_arch_name @ arch_name
.long cpu_elf_name @ elf_name
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 6f0db29..4adb46b 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -390,11 +390,11 @@
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
+ adr r5, arm920_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, arm920_cr1_clear
bic r0, r0, r5
- ldr r5, arm920_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
mov pc, lr
.size __arm920_setup, . - __arm920_setup
@@ -404,12 +404,9 @@
* ..11 0001 ..11 0101
*
*/
- .type arm920_cr1_clear, #object
- .type arm920_cr1_set, #object
-arm920_cr1_clear:
- .word 0x3f3f
-arm920_cr1_set:
- .word 0x3135
+ .type arm920_crval, #object
+arm920_crval:
+ crval clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130
__INITDATA
@@ -443,19 +440,7 @@
.type cpu_arm920_name, #object
cpu_arm920_name:
- .ascii "ARM920T"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- .ascii "i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- .ascii "d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- .ascii "(wt)"
-#else
- .ascii "(wb)"
-#endif
-#endif
- .ascii "\0"
+ .asciz "ARM920T"
.size cpu_arm920_name, . - cpu_arm920_name
.align
@@ -472,6 +457,10 @@
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm920_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 1ad464c..571f082 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -394,11 +394,11 @@
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
+ adr r5, arm922_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, arm922_cr1_clear
bic r0, r0, r5
- ldr r5, arm922_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
mov pc, lr
.size __arm922_setup, . - __arm922_setup
@@ -408,12 +408,9 @@
* ..11 0001 ..11 0101
*
*/
- .type arm922_cr1_clear, #object
- .type arm922_cr1_set, #object
-arm922_cr1_clear:
- .word 0x3f3f
-arm922_cr1_set:
- .word 0x3135
+ .type arm922_crval, #object
+arm922_crval:
+ crval clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130
__INITDATA
@@ -447,19 +444,7 @@
.type cpu_arm922_name, #object
cpu_arm922_name:
- .ascii "ARM922T"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- .ascii "i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- .ascii "d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- .ascii "(wt)"
-#else
- .ascii "(wb)"
-#endif
-#endif
- .ascii "\0"
+ .asciz "ARM922T"
.size cpu_arm922_name, . - cpu_arm922_name
.align
@@ -476,6 +461,10 @@
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm922_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index a55d56c..ad15f85 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -454,11 +454,10 @@
mcr p15, 7, r0, c15, c0, 0
#endif
+ adr r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, arm925_cr1_clear
bic r0, r0, r5
- ldr r5, arm925_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
orr r0, r0, #0x4000 @ .1.. .... .... ....
#endif
@@ -471,12 +470,9 @@
* .011 0001 ..11 1101
*
*/
- .type arm925_cr1_clear, #object
- .type arm925_cr1_set, #object
-arm925_cr1_clear:
- .word 0x7f3f
-arm925_cr1_set:
- .word 0x313d
+ .type arm925_crval, #object
+arm925_crval:
+ crval clear=0x00007f3f, mmuset=0x0000313d, ucset=0x00001130
__INITDATA
@@ -510,22 +506,7 @@
.type cpu_arm925_name, #object
cpu_arm925_name:
- .ascii "ARM925T"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- .ascii "i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- .ascii "d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- .ascii "(wt)"
-#else
- .ascii "(wb)"
-#endif
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
- .ascii "RR"
-#endif
-#endif
- .ascii "\0"
+ .asciz "ARM925T"
.size cpu_arm925_name, . - cpu_arm925_name
.align
@@ -540,6 +521,10 @@
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm925_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -559,6 +544,10 @@
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm925_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 2027596..1e89d40 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -403,11 +403,11 @@
mcr p15, 7, r0, c15, c0, 0
#endif
+ adr r5, arm926_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, arm926_cr1_clear
bic r0, r0, r5
- ldr r5, arm926_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
orr r0, r0, #0x4000 @ .1.. .... .... ....
#endif
@@ -420,12 +420,9 @@
* .011 0001 ..11 0101
*
*/
- .type arm926_cr1_clear, #object
- .type arm926_cr1_set, #object
-arm926_cr1_clear:
- .word 0x7f3f
-arm926_cr1_set:
- .word 0x3135
+ .type arm926_crval, #object
+arm926_crval:
+ crval clear=0x00007f3f, mmuset=0x00003135, ucset=0x00001134
__INITDATA
@@ -459,22 +456,7 @@
.type cpu_arm926_name, #object
cpu_arm926_name:
- .ascii "ARM926EJ-S"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- .ascii "i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- .ascii "d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- .ascii "(wt)"
-#else
- .ascii "(wb)"
-#endif
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
- .ascii "RR"
-#endif
-#endif
- .ascii "\0"
+ .asciz "ARM926EJ-S"
.size cpu_arm926_name, . - cpu_arm926_name
.align
@@ -491,6 +473,10 @@
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm926_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 7cfc260..9e2c89e 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -49,3 +49,13 @@
.macro asid, rd, rn
and \rd, \rn, #255
.endm
+
+ .macro crval, clear, mmuset, ucset
+#ifdef CONFIG_MMU
+ .word \clear
+ .word \mmuset
+#else
+ .word \clear
+ .word \ucset
+#endif
+ .endm
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 5a760a2..e812246 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -185,11 +185,12 @@
#ifdef CONFIG_MMU
mcr p15, 0, r10, c8, c7 @ invalidate I,D TLBs on v4
#endif
+
+ adr r5, sa110_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, sa110_cr1_clear
bic r0, r0, r5
- ldr r5, sa110_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
mov pc, lr
.size __sa110_setup, . - __sa110_setup
@@ -199,12 +200,9 @@
* ..01 0001 ..11 1101
*
*/
- .type sa110_cr1_clear, #object
- .type sa110_cr1_set, #object
-sa110_cr1_clear:
- .word 0x3f3f
-sa110_cr1_set:
- .word 0x113d
+ .type sa110_crval, #object
+sa110_crval:
+ crval clear=0x00003f3f, mmuset=0x0000113d, ucset=0x00001130
__INITDATA
@@ -255,6 +253,9 @@
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __sa110_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 0a2107a..ba32cc6 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -198,11 +198,11 @@
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
+ adr r5, sa1100_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, sa1100_cr1_clear
bic r0, r0, r5
- ldr r5, sa1100_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
mov pc, lr
.size __sa1100_setup, . - __sa1100_setup
@@ -212,12 +212,9 @@
* ..11 0001 ..11 1101
*
*/
- .type sa1100_cr1_clear, #object
- .type sa1100_cr1_set, #object
-sa1100_cr1_clear:
- .word 0x3f3f
-sa1100_cr1_set:
- .word 0x313d
+ .type sa1100_crval, #object
+sa1100_crval:
+ crval clear=0x00003f3f, mmuset=0x0000313d, ucset=0x00001130
__INITDATA
@@ -276,6 +273,9 @@
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __sa1100_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -296,6 +296,9 @@
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __sa1100_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index ca13d4d..6f72549 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -212,11 +212,11 @@
orr r0, r0, #(0xf << 20)
mcr p15, 0, r0, c1, c0, 2 @ Enable full access to VFP
#endif
+ adr r5, v6_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0, 0 @ read control register
- ldr r5, v6_cr1_clear @ get mask for bits to clear
bic r0, r0, r5 @ clear bits them
- ldr r5, v6_cr1_set @ get mask for bits to set
- orr r0, r0, r5 @ set them
+ orr r0, r0, r6 @ set them
mov pc, lr @ return to head.S:__ret
/*
@@ -225,12 +225,9 @@
* rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced
* 0 110 0011 1.00 .111 1101 < we want
*/
- .type v6_cr1_clear, #object
- .type v6_cr1_set, #object
-v6_cr1_clear:
- .word 0x01e0fb7f
-v6_cr1_set:
- .word 0x00c0387d
+ .type v6_crval, #object
+v6_crval:
+ crval clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c
.type v6_processor_functions, #object
ENTRY(v6_processor_functions)
@@ -269,6 +266,10 @@
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_XN | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __v6_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 8d32e21..4ace2d8 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -426,23 +426,26 @@
orr r0, r0, #(1 << 10) @ enable L2 for LLR cache
#endif
mcr p15, 0, r0, c1, c0, 1 @ set auxiliary control reg
+
+ adr r5, xsc3_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0, 0 @ get control register
- bic r0, r0, #0x0002 @ .... .... .... ..A.
- orr r0, r0, #0x0005 @ .... .... .... .C.M
+ bic r0, r0, r5 @ .... .... .... ..A.
+ orr r0, r0, r6 @ .... .... .... .C.M
#if BTB_ENABLE
- bic r0, r0, #0x0200 @ .... ..R. .... ....
- orr r0, r0, #0x3900 @ ..VI Z..S .... ....
-#else
- bic r0, r0, #0x0a00 @ .... Z.R. .... ....
- orr r0, r0, #0x3100 @ ..VI ...S .... ....
+ orr r0, r0, #0x00000800 @ ..VI Z..S .... ....
#endif
#if L2_CACHE_ENABLE
- orr r0, r0, #0x4000000 @ L2 enable
+ orr r0, r0, #0x04000000 @ L2 enable
#endif
mov pc, lr
.size __xsc3_setup, . - __xsc3_setup
+ .type xsc3_crval, #object
+xsc3_crval:
+ crval clear=0x04003b02, mmuset=0x00003105, ucset=0x00001100
+
__INITDATA
/*
@@ -487,7 +490,14 @@
__xsc3_proc_info:
.long 0x69056000
.long 0xffffe000
- .long 0x00000c0e
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xsc3_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 29bcc4d..5215386 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -138,17 +138,23 @@
* to what would be the reset vector.
*
* loc: location to jump to for soft reset
+ *
+ * Beware PXA270 erratum E7.
*/
.align 5
ENTRY(cpu_xscale_reset)
mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
msr cpsr_c, r1 @ reset CPSR
+ mcr p15, 0, r1, c10, c4, 1 @ unlock I-TLB
+ mcr p15, 0, r1, c8, c5, 0 @ invalidate I-TLB
mrc p15, 0, r1, c1, c0, 0 @ ctrl register
bic r1, r1, #0x0086 @ ........B....CA.
bic r1, r1, #0x3900 @ ..VIZ..S........
+ sub pc, pc, #4 @ flush pipeline
+ @ *** cache line aligned ***
mcr p15, 0, r1, c1, c0, 0 @ ctrl register
- mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB
bic r1, r1, #0x0001 @ ...............M
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB
mcr p15, 0, r1, c1, c0, 0 @ ctrl register
@ CAUTION: MMU turned off from this point. We count on the pipeline
@ already containing those two last instructions to survive.
@@ -475,11 +481,12 @@
orr r0, r0, #1 << 6 @ cp6 for IOP3xx and Bulverde
orr r0, r0, #1 << 13 @ Its undefined whether this
mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes
+
+ adr r5, xscale_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0, 0 @ get control register
- ldr r5, xscale_cr1_clear
bic r0, r0, r5
- ldr r5, xscale_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
mov pc, lr
.size __xscale_setup, . - __xscale_setup
@@ -489,12 +496,9 @@
* ..11 1.01 .... .101
*
*/
- .type xscale_cr1_clear, #object
- .type xscale_cr1_set, #object
-xscale_cr1_clear:
- .word 0x3b07
-xscale_cr1_set:
- .word 0x3905
+ .type xscale_crval, #object
+xscale_crval:
+ crval clear=0x00003b07, mmuset=0x00003905, ucset=0x00001900
__INITDATA
@@ -595,6 +599,9 @@
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -615,6 +622,9 @@
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -635,6 +645,9 @@
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -655,6 +668,9 @@
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -675,6 +691,9 @@
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -695,6 +714,9 @@
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -715,6 +737,9 @@
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -735,6 +760,9 @@
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -750,7 +778,14 @@
__ixp46x_proc_info:
.long 0x69054200
.long 0xffffff00
- .long 0x00000c0e
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -771,6 +806,9 @@
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -791,6 +829,9 @@
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ec49495..ec752e1 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -91,7 +91,7 @@
config OMAP_DM_TIMER
bool "Use dual-mode timer"
- depends on ARCH_OMAP16XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX
help
Select this option if you want to use OMAP Dual-Mode timers.
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index c520e9d..7f45c7c 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -27,9 +27,9 @@
#include <asm/arch/clock.h>
-LIST_HEAD(clocks);
+static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
-DEFINE_SPINLOCK(clockfw_lock);
+static DEFINE_SPINLOCK(clockfw_lock);
static struct clk_functions *arch_clock;
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 98edc9f..a0c71dc 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -25,6 +25,14 @@
#include <asm/io.h>
#include <asm/system.h>
+#define VERY_HI_RATE 900000000
+
+#ifdef CONFIG_ARCH_OMAP1
+#define MPU_CLK "mpu"
+#else
+#define MPU_CLK "virt_prcm_set"
+#endif
+
/* TODO: Add support for SDRAM timing changes */
int omap_verify_speed(struct cpufreq_policy *policy)
@@ -36,7 +44,7 @@
cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
policy->cpuinfo.max_freq);
- mpu_clk = clk_get(NULL, "mpu");
+ mpu_clk = clk_get(NULL, MPU_CLK);
if (IS_ERR(mpu_clk))
return PTR_ERR(mpu_clk);
policy->min = clk_round_rate(mpu_clk, policy->min * 1000) / 1000;
@@ -56,7 +64,7 @@
if (cpu)
return 0;
- mpu_clk = clk_get(NULL, "mpu");
+ mpu_clk = clk_get(NULL, MPU_CLK);
if (IS_ERR(mpu_clk))
return 0;
rate = clk_get_rate(mpu_clk) / 1000;
@@ -73,7 +81,7 @@
struct cpufreq_freqs freqs;
int ret = 0;
- mpu_clk = clk_get(NULL, "mpu");
+ mpu_clk = clk_get(NULL, MPU_CLK);
if (IS_ERR(mpu_clk))
return PTR_ERR(mpu_clk);
@@ -93,7 +101,7 @@
{
struct clk * mpu_clk;
- mpu_clk = clk_get(NULL, "mpu");
+ mpu_clk = clk_get(NULL, MPU_CLK);
if (IS_ERR(mpu_clk))
return PTR_ERR(mpu_clk);
@@ -102,7 +110,7 @@
policy->cur = policy->min = policy->max = omap_getspeed(0);
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
- policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, 216000000) / 1000;
+ policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, VERY_HI_RATE) / 1000;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
clk_put(mpu_clk);
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index ca486c9..1812f23 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -104,7 +104,7 @@
omap_cfg_reg(E20_1610_KBR3);
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
- } else if (machine_is_omap_perseus2()) {
+ } else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
omap_cfg_reg(E2_730_KBR0);
omap_cfg_reg(J7_730_KBR1);
omap_cfg_reg(E1_730_KBR2);
@@ -161,8 +161,8 @@
static struct resource mmc1_resources[] = {
{
- .start = IO_ADDRESS(OMAP_MMC1_BASE),
- .end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
+ .start = OMAP_MMC1_BASE,
+ .end = OMAP_MMC1_BASE + 0x7f,
.flags = IORESOURCE_MEM,
},
{
@@ -190,8 +190,8 @@
static struct resource mmc2_resources[] = {
{
- .start = IO_ADDRESS(OMAP_MMC2_BASE),
- .end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
+ .start = OMAP_MMC2_BASE,
+ .end = OMAP_MMC2_BASE + 0x7f,
.flags = IORESOURCE_MEM,
},
{
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 2525633..c2c05ef 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -43,6 +43,7 @@
#define OMAP_DMA_ACTIVE 0x01
#define OMAP_DMA_CCR_EN (1 << 7)
+#define OMAP2_DMA_CSR_CLEAR_MASK 0xffe
#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
@@ -166,18 +167,24 @@
if (cpu_is_omap24xx() && dma_trigger) {
u32 val = OMAP_DMA_CCR_REG(lch);
+ val &= ~(3 << 19);
if (dma_trigger > 63)
val |= 1 << 20;
if (dma_trigger > 31)
val |= 1 << 19;
+ val &= ~(0x1f);
val |= (dma_trigger & 0x1f);
if (sync_mode & OMAP_DMA_SYNC_FRAME)
val |= 1 << 5;
+ else
+ val &= ~(1 << 5);
if (sync_mode & OMAP_DMA_SYNC_BLOCK)
val |= 1 << 18;
+ else
+ val &= ~(1 << 18);
if (src_or_dst_synch)
val |= 1 << 24; /* source synch */
@@ -286,22 +293,39 @@
void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
+ unsigned int burst = 0;
OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7);
switch (burst_mode) {
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- OMAP_DMA_CSDP_REG(lch) |= (0x02 << 7);
+ if (cpu_is_omap24xx())
+ burst = 0x1;
+ else
+ burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- /* not supported by current hardware
+ if (cpu_is_omap24xx()) {
+ burst = 0x2;
+ break;
+ }
+ /* not supported by current hardware on OMAP1
* w |= (0x03 << 7);
* fall through
*/
+ case OMAP_DMA_DATA_BURST_16:
+ if (cpu_is_omap24xx()) {
+ burst = 0x3;
+ break;
+ }
+ /* OMAP1 don't support burst 16
+ * fall through
+ */
default:
BUG();
}
+ OMAP_DMA_CSDP_REG(lch) |= (burst << 7);
}
/* Note that dest_port is only for OMAP1 */
@@ -348,30 +372,49 @@
void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
+ unsigned int burst = 0;
OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14);
switch (burst_mode) {
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- OMAP_DMA_CSDP_REG(lch) |= (0x02 << 14);
+ if (cpu_is_omap24xx())
+ burst = 0x1;
+ else
+ burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- OMAP_DMA_CSDP_REG(lch) |= (0x03 << 14);
+ if (cpu_is_omap24xx())
+ burst = 0x2;
+ else
+ burst = 0x3;
break;
+ case OMAP_DMA_DATA_BURST_16:
+ if (cpu_is_omap24xx()) {
+ burst = 0x3;
+ break;
+ }
+ /* OMAP1 don't support burst 16
+ * fall through
+ */
default:
printk(KERN_ERR "Invalid DMA burst mode\n");
BUG();
return;
}
+ OMAP_DMA_CSDP_REG(lch) |= (burst << 14);
}
static inline void omap_enable_channel_irq(int lch)
{
u32 status;
- /* Read CSR to make sure it's cleared. */
- status = OMAP_DMA_CSR_REG(lch);
+ /* Clear CSR */
+ if (cpu_class_is_omap1())
+ status = OMAP_DMA_CSR_REG(lch);
+ else if (cpu_is_omap24xx())
+ OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
/* Enable some nice interrupts. */
OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
@@ -470,11 +513,13 @@
chan->dev_name = dev_name;
chan->callback = callback;
chan->data = data;
- chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ |
- OMAP_DMA_BLOCK_IRQ;
+ chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
- if (cpu_is_omap24xx())
- chan->enabled_irqs |= OMAP2_DMA_TRANS_ERR_IRQ;
+ if (cpu_class_is_omap1())
+ chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
+ else if (cpu_is_omap24xx())
+ chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
+ OMAP2_DMA_TRANS_ERR_IRQ;
if (cpu_is_omap16xx()) {
/* If the sync device is set, configure it dynamically. */
@@ -494,7 +539,7 @@
omap_enable_channel_irq(free_ch);
/* Clear the CSR register and IRQ status register */
- OMAP_DMA_CSR_REG(free_ch) = 0x0;
+ OMAP_DMA_CSR_REG(free_ch) = OMAP2_DMA_CSR_CLEAR_MASK;
omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0);
}
@@ -534,7 +579,7 @@
omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
/* Clear the CSR register and IRQ status register */
- OMAP_DMA_CSR_REG(lch) = 0x0;
+ OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
val |= 1 << lch;
@@ -798,7 +843,7 @@
"%d (CSR %04x)\n", ch, csr);
return 0;
}
- if (unlikely(csr & OMAP_DMA_TOUT_IRQ))
+ if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
printk(KERN_WARNING "DMA timeout with device %d\n",
dma_chan[ch].dev_id);
if (unlikely(csr & OMAP_DMA_DROP_IRQ))
@@ -846,20 +891,21 @@
return 0;
if (unlikely(dma_chan[ch].dev_id == -1))
return 0;
- /* REVISIT: According to 24xx TRM, there's no TOUT_IE */
- if (unlikely(status & OMAP_DMA_TOUT_IRQ))
- printk(KERN_INFO "DMA timeout with device %d\n",
- dma_chan[ch].dev_id);
if (unlikely(status & OMAP_DMA_DROP_IRQ))
printk(KERN_INFO
"DMA synchronization event drop occurred with device "
"%d\n", dma_chan[ch].dev_id);
-
if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ))
printk(KERN_INFO "DMA transaction error with device %d\n",
dma_chan[ch].dev_id);
+ if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
+ printk(KERN_INFO "DMA secure error with device %d\n",
+ dma_chan[ch].dev_id);
+ if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
+ printk(KERN_INFO "DMA misaligned error with device %d\n",
+ dma_chan[ch].dev_id);
- OMAP_DMA_CSR_REG(ch) = 0x20;
+ OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK;
val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
/* ch in this function is from 0-31 while in register it is 1-32 */
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index eba3cb5..5052443 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -4,7 +4,8 @@
* OMAP Dual-Mode Timers
*
* Copyright (C) 2005 Nokia Corporation
- * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * OMAP2 support by Juha Yrjola
+ * API improvements and OMAP2 clock framework support by Timo Teras
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -26,15 +27,17 @@
*/
#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
#include <asm/hardware.h>
#include <asm/arch/dmtimer.h>
#include <asm/io.h>
#include <asm/arch/irqs.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#define OMAP_TIMER_COUNT 8
-
+/* register offsets */
#define OMAP_TIMER_ID_REG 0x00
#define OMAP_TIMER_OCP_CFG_REG 0x10
#define OMAP_TIMER_SYS_STAT_REG 0x14
@@ -50,52 +53,196 @@
#define OMAP_TIMER_CAPTURE_REG 0x3c
#define OMAP_TIMER_IF_CTRL_REG 0x40
+/* timer control reg bits */
+#define OMAP_TIMER_CTRL_GPOCFG (1 << 14)
+#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13)
+#define OMAP_TIMER_CTRL_PT (1 << 12)
+#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8)
+#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8)
+#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8)
+#define OMAP_TIMER_CTRL_SCPWM (1 << 7)
+#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */
+#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */
+#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* how much to shift the prescaler value */
+#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */
+#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */
-static struct dmtimer_info_struct {
- struct list_head unused_timers;
- struct list_head reserved_timers;
-} dm_timer_info;
-
-static struct omap_dm_timer dm_timers[] = {
- { .base=0xfffb1400, .irq=INT_1610_GPTIMER1 },
- { .base=0xfffb1c00, .irq=INT_1610_GPTIMER2 },
- { .base=0xfffb2400, .irq=INT_1610_GPTIMER3 },
- { .base=0xfffb2c00, .irq=INT_1610_GPTIMER4 },
- { .base=0xfffb3400, .irq=INT_1610_GPTIMER5 },
- { .base=0xfffb3c00, .irq=INT_1610_GPTIMER6 },
- { .base=0xfffb4400, .irq=INT_1610_GPTIMER7 },
- { .base=0xfffb4c00, .irq=INT_1610_GPTIMER8 },
- { .base=0x0 },
+struct omap_dm_timer {
+ unsigned long phys_base;
+ int irq;
+#ifdef CONFIG_ARCH_OMAP2
+ struct clk *iclk, *fclk;
+#endif
+ void __iomem *io_base;
+ unsigned reserved:1;
};
+#ifdef CONFIG_ARCH_OMAP1
+static struct omap_dm_timer dm_timers[] = {
+ { .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
+ { .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 },
+ { .phys_base = 0xfffb2400, .irq = INT_1610_GPTIMER3 },
+ { .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 },
+ { .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 },
+ { .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 },
+ { .phys_base = 0xfffb4400, .irq = INT_1610_GPTIMER7 },
+ { .phys_base = 0xfffb4c00, .irq = INT_1610_GPTIMER8 },
+};
+
+#elif defined(CONFIG_ARCH_OMAP2)
+
+static struct omap_dm_timer dm_timers[] = {
+ { .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
+ { .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 },
+ { .phys_base = 0x48078000, .irq = INT_24XX_GPTIMER3 },
+ { .phys_base = 0x4807a000, .irq = INT_24XX_GPTIMER4 },
+ { .phys_base = 0x4807c000, .irq = INT_24XX_GPTIMER5 },
+ { .phys_base = 0x4807e000, .irq = INT_24XX_GPTIMER6 },
+ { .phys_base = 0x48080000, .irq = INT_24XX_GPTIMER7 },
+ { .phys_base = 0x48082000, .irq = INT_24XX_GPTIMER8 },
+ { .phys_base = 0x48084000, .irq = INT_24XX_GPTIMER9 },
+ { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
+ { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
+ { .phys_base = 0x4808a000, .irq = INT_24XX_GPTIMER12 },
+};
+
+static const char *dm_source_names[] = {
+ "sys_ck",
+ "func_32k_ck",
+ "alt_ck"
+};
+
+static struct clk *dm_source_clocks[3];
+
+#else
+
+#error OMAP architecture not supported!
+
+#endif
+
+static const int dm_timer_count = ARRAY_SIZE(dm_timers);
static spinlock_t dm_timer_lock;
-
-inline void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value)
+static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg)
{
- omap_writel(value, timer->base + reg);
+ return readl(timer->io_base + reg);
+}
+
+static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value)
+{
+ writel(value, timer->io_base + reg);
while (omap_dm_timer_read_reg(timer, OMAP_TIMER_WRITE_PEND_REG))
;
}
-u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg)
+static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
{
- return omap_readl(timer->base + reg);
+ int c;
+
+ c = 0;
+ while (!(omap_dm_timer_read_reg(timer, OMAP_TIMER_SYS_STAT_REG) & 1)) {
+ c++;
+ if (c > 100000) {
+ printk(KERN_ERR "Timer failed to reset\n");
+ return;
+ }
+ }
}
-int omap_dm_timers_active(void)
+static void omap_dm_timer_reset(struct omap_dm_timer *timer)
+{
+ u32 l;
+
+ if (timer != &dm_timers[0]) {
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
+ omap_dm_timer_wait_for_reset(timer);
+ }
+ omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_SYS_CLK);
+
+ /* Set to smart-idle mode */
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG);
+ l |= 0x02 << 3;
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
+}
+
+static void omap_dm_timer_prepare(struct omap_dm_timer *timer)
+{
+#ifdef CONFIG_ARCH_OMAP2
+ clk_enable(timer->iclk);
+ clk_enable(timer->fclk);
+#endif
+ omap_dm_timer_reset(timer);
+}
+
+struct omap_dm_timer *omap_dm_timer_request(void)
+{
+ struct omap_dm_timer *timer = NULL;
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ for (i = 0; i < dm_timer_count; i++) {
+ if (dm_timers[i].reserved)
+ continue;
+
+ timer = &dm_timers[i];
+ timer->reserved = 1;
+ break;
+ }
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ if (timer != NULL)
+ omap_dm_timer_prepare(timer);
+
+ return timer;
+}
+
+struct omap_dm_timer *omap_dm_timer_request_specific(int id)
{
struct omap_dm_timer *timer;
+ unsigned long flags;
- for (timer = &dm_timers[0]; timer->base; ++timer)
- if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
- OMAP_TIMER_CTRL_ST)
- return 1;
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ if (id <= 0 || id > dm_timer_count || dm_timers[id-1].reserved) {
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+ printk("BUG: warning at %s:%d/%s(): unable to get timer %d\n",
+ __FILE__, __LINE__, __FUNCTION__, id);
+ dump_stack();
+ return NULL;
+ }
- return 0;
+ timer = &dm_timers[id-1];
+ timer->reserved = 1;
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ omap_dm_timer_prepare(timer);
+
+ return timer;
}
+void omap_dm_timer_free(struct omap_dm_timer *timer)
+{
+ omap_dm_timer_reset(timer);
+#ifdef CONFIG_ARCH_OMAP2
+ clk_disable(timer->iclk);
+ clk_disable(timer->fclk);
+#endif
+ WARN_ON(!timer->reserved);
+ timer->reserved = 0;
+}
+
+int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
+{
+ return timer->irq;
+}
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
+{
+ BUG();
+}
/**
* omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR
@@ -103,25 +250,70 @@
*/
__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
{
- int n;
+ int i;
/* If ARMXOR cannot be idled this function call is unnecessary */
if (!(inputmask & (1 << 1)))
return inputmask;
/* If any active timer is using ARMXOR return modified mask */
- for (n = 0; dm_timers[n].base; ++n)
- if (omap_dm_timer_read_reg(&dm_timers[n], OMAP_TIMER_CTRL_REG)&
- OMAP_TIMER_CTRL_ST) {
- if (((omap_readl(MOD_CONF_CTRL_1)>>(n*2)) & 0x03) == 0)
+ for (i = 0; i < dm_timer_count; i++) {
+ u32 l;
+
+ l = omap_dm_timer_read_reg(&dm_timers[i], OMAP_TIMER_CTRL_REG);
+ if (l & OMAP_TIMER_CTRL_ST) {
+ if (((omap_readl(MOD_CONF_CTRL_1) >> (i * 2)) & 0x03) == 0)
inputmask &= ~(1 << 1);
else
inputmask &= ~(1 << 2);
}
+ }
return inputmask;
}
+#elif defined(CONFIG_ARCH_OMAP2)
+
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
+{
+ return timer->fclk;
+}
+
+__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
+{
+ BUG();
+}
+
+#endif
+
+void omap_dm_timer_trigger(struct omap_dm_timer *timer)
+{
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
+}
+
+void omap_dm_timer_start(struct omap_dm_timer *timer)
+{
+ u32 l;
+
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ if (!(l & OMAP_TIMER_CTRL_ST)) {
+ l |= OMAP_TIMER_CTRL_ST;
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+ }
+}
+
+void omap_dm_timer_stop(struct omap_dm_timer *timer)
+{
+ u32 l;
+
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ if (l & OMAP_TIMER_CTRL_ST) {
+ l &= ~0x1;
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+ }
+}
+
+#ifdef CONFIG_ARCH_OMAP1
void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
@@ -133,49 +325,85 @@
omap_writel(l, MOD_CONF_CTRL_1);
}
+#else
-static void omap_dm_timer_reset(struct omap_dm_timer *timer)
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
- /* Reset and set posted mode */
- omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
- omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, 0x02);
+ if (source < 0 || source >= 3)
+ return;
- omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_ARMXOR);
+ clk_disable(timer->fclk);
+ clk_set_parent(timer->fclk, dm_source_clocks[source]);
+ clk_enable(timer->fclk);
+
+ /* When the functional clock disappears, too quick writes seem to
+ * cause an abort. */
+ __delay(15000);
+}
+
+#endif
+
+void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
+ unsigned int load)
+{
+ u32 l;
+
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ if (autoreload)
+ l |= OMAP_TIMER_CTRL_AR;
+ else
+ l &= ~OMAP_TIMER_CTRL_AR;
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
+}
+
+void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
+ unsigned int match)
+{
+ u32 l;
+
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ if (enable)
+ l |= OMAP_TIMER_CTRL_CE;
+ else
+ l &= ~OMAP_TIMER_CTRL_CE;
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
}
-
-struct omap_dm_timer * omap_dm_timer_request(void)
+void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
+ int toggle, int trigger)
{
- struct omap_dm_timer *timer = NULL;
- unsigned long flags;
+ u32 l;
- spin_lock_irqsave(&dm_timer_lock, flags);
- if (!list_empty(&dm_timer_info.unused_timers)) {
- timer = (struct omap_dm_timer *)
- dm_timer_info.unused_timers.next;
- list_move_tail((struct list_head *)timer,
- &dm_timer_info.reserved_timers);
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ l &= ~(OMAP_TIMER_CTRL_GPOCFG | OMAP_TIMER_CTRL_SCPWM |
+ OMAP_TIMER_CTRL_PT | (0x03 << 10));
+ if (def_on)
+ l |= OMAP_TIMER_CTRL_SCPWM;
+ if (toggle)
+ l |= OMAP_TIMER_CTRL_PT;
+ l |= trigger << 10;
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+}
+
+void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
+{
+ u32 l;
+
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2));
+ if (prescaler >= 0x00 && prescaler <= 0x07) {
+ l |= OMAP_TIMER_CTRL_PRE;
+ l |= prescaler << 2;
}
- spin_unlock_irqrestore(&dm_timer_lock, flags);
-
- return timer;
-}
-
-
-void omap_dm_timer_free(struct omap_dm_timer *timer)
-{
- unsigned long flags;
-
- omap_dm_timer_reset(timer);
-
- spin_lock_irqsave(&dm_timer_lock, flags);
- list_move_tail((struct list_head *)timer, &dm_timer_info.unused_timers);
- spin_unlock_irqrestore(&dm_timer_lock, flags);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
- unsigned int value)
+ unsigned int value)
{
omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
}
@@ -190,97 +418,61 @@
omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value);
}
-void omap_dm_timer_enable_autoreload(struct omap_dm_timer *timer)
-{
- u32 l;
- l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
- l |= OMAP_TIMER_CTRL_AR;
- omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
-}
-
-void omap_dm_timer_trigger(struct omap_dm_timer *timer)
-{
- omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 1);
-}
-
-void omap_dm_timer_set_trigger(struct omap_dm_timer *timer, unsigned int value)
-{
- u32 l;
-
- l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
- l |= value & 0x3;
- omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
-}
-
-void omap_dm_timer_start(struct omap_dm_timer *timer)
-{
- u32 l;
-
- l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
- l |= OMAP_TIMER_CTRL_ST;
- omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
-}
-
-void omap_dm_timer_stop(struct omap_dm_timer *timer)
-{
- u32 l;
-
- l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
- l &= ~0x1;
- omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
-}
-
unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
{
return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG);
}
-void omap_dm_timer_reset_counter(struct omap_dm_timer *timer)
+void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
{
- omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, 0);
+ return omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
}
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, unsigned int load)
+int omap_dm_timers_active(void)
{
- omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
-}
+ int i;
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, unsigned int match)
-{
- omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
-}
+ for (i = 0; i < dm_timer_count; i++) {
+ struct omap_dm_timer *timer;
-void omap_dm_timer_enable_compare(struct omap_dm_timer *timer)
-{
- u32 l;
-
- l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
- l |= OMAP_TIMER_CTRL_CE;
- omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
-}
-
-
-static inline void __dm_timer_init(void)
-{
- struct omap_dm_timer *timer;
-
- spin_lock_init(&dm_timer_lock);
- INIT_LIST_HEAD(&dm_timer_info.unused_timers);
- INIT_LIST_HEAD(&dm_timer_info.reserved_timers);
-
- timer = &dm_timers[0];
- while (timer->base) {
- list_add_tail((struct list_head *)timer, &dm_timer_info.unused_timers);
- omap_dm_timer_reset(timer);
- timer++;
+ timer = &dm_timers[i];
+ if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
+ OMAP_TIMER_CTRL_ST)
+ return 1;
}
-}
-
-static int __init omap_dm_timer_init(void)
-{
- if (cpu_is_omap16xx())
- __dm_timer_init();
return 0;
}
-arch_initcall(omap_dm_timer_init);
+int omap_dm_timer_init(void)
+{
+ struct omap_dm_timer *timer;
+ int i;
+
+ if (!(cpu_is_omap16xx() || cpu_is_omap24xx()))
+ return -ENODEV;
+
+ spin_lock_init(&dm_timer_lock);
+#ifdef CONFIG_ARCH_OMAP2
+ for (i = 0; i < ARRAY_SIZE(dm_source_names); i++) {
+ dm_source_clocks[i] = clk_get(NULL, dm_source_names[i]);
+ BUG_ON(dm_source_clocks[i] == NULL);
+ }
+#endif
+
+ for (i = 0; i < dm_timer_count; i++) {
+#ifdef CONFIG_ARCH_OMAP2
+ char clk_name[16];
+#endif
+
+ timer = &dm_timers[i];
+ timer->io_base = (void __iomem *) io_p2v(timer->phys_base);
+#ifdef CONFIG_ARCH_OMAP2
+ sprintf(clk_name, "gpt%d_ick", i + 1);
+ timer->iclk = clk_get(NULL, clk_name);
+ sprintf(clk_name, "gpt%d_fck", i + 1);
+ timer->fclk = clk_get(NULL, clk_name);
+#endif
+ }
+
+ return 0;
+}
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 312ace5..cb0c21d 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -536,6 +536,49 @@
_clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio));
}
+static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
+{
+ void __iomem *reg = bank->base;
+ int inv = 0;
+ u32 l;
+ u32 mask;
+
+ switch (bank->method) {
+ case METHOD_MPUIO:
+ reg += OMAP_MPUIO_GPIO_MASKIT;
+ mask = 0xffff;
+ inv = 1;
+ break;
+ case METHOD_GPIO_1510:
+ reg += OMAP1510_GPIO_INT_MASK;
+ mask = 0xffff;
+ inv = 1;
+ break;
+ case METHOD_GPIO_1610:
+ reg += OMAP1610_GPIO_IRQENABLE1;
+ mask = 0xffff;
+ break;
+ case METHOD_GPIO_730:
+ reg += OMAP730_GPIO_INT_MASK;
+ mask = 0xffffffff;
+ inv = 1;
+ break;
+ case METHOD_GPIO_24XX:
+ reg += OMAP24XX_GPIO_IRQENABLE1;
+ mask = 0xffffffff;
+ break;
+ default:
+ BUG();
+ return 0;
+ }
+
+ l = __raw_readl(reg);
+ if (inv)
+ l = ~l;
+ l &= mask;
+ return l;
+}
+
static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
{
void __iomem *reg = bank->base;
@@ -735,6 +778,8 @@
u32 isr;
unsigned int gpio_irq;
struct gpio_bank *bank;
+ u32 retrigger = 0;
+ int unmasked = 0;
desc->chip->ack(irq);
@@ -759,18 +804,22 @@
#endif
while(1) {
u32 isr_saved, level_mask = 0;
+ u32 enabled;
- isr_saved = isr = __raw_readl(isr_reg);
+ enabled = _get_gpio_irqbank_mask(bank);
+ isr_saved = isr = __raw_readl(isr_reg) & enabled;
if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO))
isr &= 0x0000ffff;
- if (cpu_is_omap24xx())
+ if (cpu_is_omap24xx()) {
level_mask =
__raw_readl(bank->base +
OMAP24XX_GPIO_LEVELDETECT0) |
__raw_readl(bank->base +
OMAP24XX_GPIO_LEVELDETECT1);
+ level_mask &= enabled;
+ }
/* clear edge sensitive interrupts before handler(s) are
called so that we don't miss any interrupt occurred while
@@ -781,19 +830,54 @@
/* if there is only edge sensitive GPIO pin interrupts
configured, we could unmask GPIO bank interrupt immediately */
- if (!level_mask)
+ if (!level_mask && !unmasked) {
+ unmasked = 1;
desc->chip->unmask(irq);
+ }
+ isr |= retrigger;
+ retrigger = 0;
if (!isr)
break;
gpio_irq = bank->virtual_irq_start;
for (; isr != 0; isr >>= 1, gpio_irq++) {
struct irqdesc *d;
+ int irq_mask;
if (!(isr & 1))
continue;
d = irq_desc + gpio_irq;
+ /* Don't run the handler if it's already running
+ * or was disabled lazely.
+ */
+ if (unlikely((d->disable_depth || d->running))) {
+ irq_mask = 1 <<
+ (gpio_irq - bank->virtual_irq_start);
+ /* The unmasking will be done by
+ * enable_irq in case it is disabled or
+ * after returning from the handler if
+ * it's already running.
+ */
+ _enable_gpio_irqbank(bank, irq_mask, 0);
+ if (!d->disable_depth) {
+ /* Level triggered interrupts
+ * won't ever be reentered
+ */
+ BUG_ON(level_mask & irq_mask);
+ d->pending = 1;
+ }
+ continue;
+ }
+ d->running = 1;
desc_handle_irq(gpio_irq, d, regs);
+ d->running = 0;
+ if (unlikely(d->pending && !d->disable_depth)) {
+ irq_mask = 1 <<
+ (gpio_irq - bank->virtual_irq_start);
+ d->pending = 0;
+ _enable_gpio_irqbank(bank, irq_mask, 1);
+ retrigger |= irq_mask;
+ }
}
if (cpu_is_omap24xx()) {
@@ -803,13 +887,14 @@
_enable_gpio_irqbank(bank, isr_saved & level_mask, 1);
}
- /* if bank has any level sensitive GPIO pin interrupt
- configured, we must unmask the bank interrupt only after
- handler(s) are executed in order to avoid spurious bank
- interrupt */
- if (level_mask)
- desc->chip->unmask(irq);
}
+ /* if bank has any level sensitive GPIO pin interrupt
+ configured, we must unmask the bank interrupt only after
+ handler(s) are executed in order to avoid spurious bank
+ interrupt */
+ if (!unmasked)
+ desc->chip->unmask(irq);
+
}
static void gpio_ack_irq(unsigned int irq)
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 72ce52c..e757183 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -157,14 +157,12 @@
{ /* .length gets filled in at runtime */
.virtual = OMAP1_SRAM_VA,
.pfn = __phys_to_pfn(OMAP1_SRAM_PA),
- .type = MT_DEVICE
+ .type = MT_MEMORY
}
};
/*
- * In order to use last 2kB of SRAM on 1611b, we must round the size
- * up to multiple of PAGE_SIZE. We cannot use ioremap for SRAM, as
- * clock init needs SRAM early.
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
*/
void __init omap_map_sram(void)
{
@@ -184,8 +182,7 @@
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
}
- omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE;
- omap_sram_io_desc[0].length *= PAGE_SIZE;
+ omap_sram_io_desc[0].length = 1024 * 1024; /* Use section desc */
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
diff --git a/arch/arm/plat-omap/timer32k.c b/arch/arm/plat-omap/timer32k.c
index 053c181..ddf4360 100644
--- a/arch/arm/plat-omap/timer32k.c
+++ b/arch/arm/plat-omap/timer32k.c
@@ -7,6 +7,7 @@
* Partial timer rewrite and additional dynamic tick timer support by
* Tony Lindgen <tony@atomide.com> and
* Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * OMAP Dual-mode timer framework support by Timo Teras
*
* MPU timer code based on the older MPU timer code for OMAP
* Copyright (C) 2000 RidgeRun, Inc.
@@ -49,6 +50,7 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
+#include <asm/arch/dmtimer.h>
struct sys_timer omap_timer;
@@ -78,18 +80,6 @@
#define OMAP1_32K_TIMER_TVR 0x00
#define OMAP1_32K_TIMER_TCR 0x04
-/* 24xx specific defines */
-#define OMAP2_GP_TIMER_BASE 0x48028000
-#define CM_CLKSEL_WKUP 0x48008440
-#define GP_TIMER_TIDR 0x00
-#define GP_TIMER_TISR 0x18
-#define GP_TIMER_TIER 0x1c
-#define GP_TIMER_TCLR 0x24
-#define GP_TIMER_TCRR 0x28
-#define GP_TIMER_TLDR 0x2c
-#define GP_TIMER_TTGR 0x30
-#define GP_TIMER_TSICR 0x40
-
#define OMAP_32K_TICKS_PER_HZ (32768 / HZ)
/*
@@ -101,24 +91,55 @@
#define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \
(((nr_jiffies) * (clock_rate)) / HZ)
+#if defined(CONFIG_ARCH_OMAP1)
+
static inline void omap_32k_timer_write(int val, int reg)
{
- if (cpu_class_is_omap1())
- omap_writew(val, OMAP1_32K_TIMER_BASE + reg);
-
- if (cpu_is_omap24xx())
- omap_writel(val, OMAP2_GP_TIMER_BASE + reg);
+ omap_writew(val, OMAP1_32K_TIMER_BASE + reg);
}
static inline unsigned long omap_32k_timer_read(int reg)
{
- if (cpu_class_is_omap1())
- return omap_readl(OMAP1_32K_TIMER_BASE + reg) & 0xffffff;
-
- if (cpu_is_omap24xx())
- return omap_readl(OMAP2_GP_TIMER_BASE + reg);
+ return omap_readl(OMAP1_32K_TIMER_BASE + reg) & 0xffffff;
}
+static inline void omap_32k_timer_start(unsigned long load_val)
+{
+ omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR);
+ omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR);
+}
+
+static inline void omap_32k_timer_stop(void)
+{
+ omap_32k_timer_write(0x0, OMAP1_32K_TIMER_CR);
+}
+
+#define omap_32k_timer_ack_irq()
+
+#elif defined(CONFIG_ARCH_OMAP2)
+
+static struct omap_dm_timer *gptimer;
+
+static inline void omap_32k_timer_start(unsigned long load_val)
+{
+ omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
+ omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
+ omap_dm_timer_start(gptimer);
+}
+
+static inline void omap_32k_timer_stop(void)
+{
+ omap_dm_timer_stop(gptimer);
+}
+
+static inline void omap_32k_timer_ack_irq(void)
+{
+ u32 status = omap_dm_timer_read_status(gptimer);
+ omap_dm_timer_write_status(gptimer, status);
+}
+
+#endif
+
/*
* The 32KHz synchronized timer is an additional timer on 16xx.
* It is always running.
@@ -128,29 +149,6 @@
return omap_readl(TIMER_32K_SYNCHRONIZED);
}
-static inline void omap_32k_timer_start(unsigned long load_val)
-{
- if (cpu_class_is_omap1()) {
- omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR);
- omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR);
- }
-
- if (cpu_is_omap24xx()) {
- omap_32k_timer_write(0xffffffff - load_val, GP_TIMER_TCRR);
- omap_32k_timer_write((1 << 1), GP_TIMER_TIER);
- omap_32k_timer_write((1 << 1) | 1, GP_TIMER_TCLR);
- }
-}
-
-static inline void omap_32k_timer_stop(void)
-{
- if (cpu_class_is_omap1())
- omap_32k_timer_write(0x0, OMAP1_32K_TIMER_CR);
-
- if (cpu_is_omap24xx())
- omap_32k_timer_write(0x0, GP_TIMER_TCLR);
-}
-
/*
* Rounds down to nearest usec. Note that this will overflow for larger values.
*/
@@ -202,11 +200,7 @@
write_seqlock_irqsave(&xtime_lock, flags);
- if (cpu_is_omap24xx()) {
- u32 status = omap_32k_timer_read(GP_TIMER_TISR);
- omap_32k_timer_write(status, GP_TIMER_TISR);
- }
-
+ omap_32k_timer_ack_irq();
now = omap_32k_sync_timer_read();
while ((signed long)(now - omap_32k_last_tick)
@@ -268,9 +262,6 @@
.handler = omap_32k_timer_interrupt,
};
-static struct clk * gpt1_ick;
-static struct clk * gpt1_fck;
-
static __init void omap_init_32k_timer(void)
{
#ifdef CONFIG_NO_IDLE_HZ
@@ -279,32 +270,22 @@
if (cpu_class_is_omap1())
setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
- if (cpu_is_omap24xx())
- setup_irq(37, &omap_32k_timer_irq);
omap_timer.offset = omap_32k_timer_gettimeoffset;
omap_32k_last_tick = omap_32k_sync_timer_read();
+#ifdef CONFIG_ARCH_OMAP2
/* REVISIT: Check 24xx TIOCP_CFG settings after idle works */
if (cpu_is_omap24xx()) {
- omap_32k_timer_write(0, GP_TIMER_TCLR);
- omap_writel(0, CM_CLKSEL_WKUP); /* 32KHz clock source */
+ gptimer = omap_dm_timer_request_specific(1);
+ BUG_ON(gptimer == NULL);
- gpt1_ick = clk_get(NULL, "gpt1_ick");
- if (IS_ERR(gpt1_ick))
- printk(KERN_ERR "Could not get gpt1_ick\n");
- else
- clk_enable(gpt1_ick);
-
- gpt1_fck = clk_get(NULL, "gpt1_fck");
- if (IS_ERR(gpt1_fck))
- printk(KERN_ERR "Could not get gpt1_fck\n");
- else
- clk_enable(gpt1_fck);
-
- mdelay(100); /* Wait for clocks to stabilize */
-
- omap_32k_timer_write(0x7, GP_TIMER_TISR);
+ omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
+ setup_irq(omap_dm_timer_get_irq(gptimer), &omap_32k_timer_irq);
+ omap_dm_timer_set_int_enable(gptimer,
+ OMAP_TIMER_INT_CAPTURE | OMAP_TIMER_INT_OVERFLOW |
+ OMAP_TIMER_INT_MATCH);
}
+#endif
omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
}
@@ -316,6 +297,9 @@
*/
static void __init omap_timer_init(void)
{
+#ifdef CONFIG_OMAP_DM_TIMER
+ omap_dm_timer_init();
+#endif
omap_init_32k_timer();
}
diff --git a/arch/arm26/kernel/irq.c b/arch/arm26/kernel/irq.c
index e08ba29..d87d68b 100644
--- a/arch/arm26/kernel/irq.c
+++ b/arch/arm26/kernel/irq.c
@@ -190,7 +190,7 @@
int ret;
spin_unlock(&irq_controller_lock);
- if (!(action->flags & SA_INTERRUPT))
+ if (!(action->flags & IRQF_DISABLED))
local_irq_enable();
status = 0;
@@ -201,7 +201,7 @@
action = action->next;
} while (action);
- if (status & SA_SAMPLE_RANDOM)
+ if (status & IRQF_SAMPLE_RANDOM)
add_interrupt_randomness(irq);
spin_lock_irq(&irq_controller_lock);
@@ -451,7 +451,7 @@
* so we have to be careful not to interfere with a
* running system.
*/
- if (new->flags & SA_SAMPLE_RANDOM) {
+ if (new->flags & IRQF_SAMPLE_RANDOM) {
/*
* This function might sleep, we want to call it first,
* outside of the atomic block.
@@ -471,7 +471,7 @@
p = &desc->action;
if ((old = *p) != NULL) {
/* Can't share interrupts unless both agree to */
- if (!(old->flags & new->flags & SA_SHIRQ)) {
+ if (!(old->flags & new->flags & IRQF_SHARED)) {
spin_unlock_irqrestore(&irq_controller_lock, flags);
return -EBUSY;
}
@@ -526,11 +526,11 @@
*
* Flags:
*
- * SA_SHIRQ Interrupt is shared
+ * IRQF_SHARED Interrupt is shared
*
- * SA_INTERRUPT Disable local interrupts while processing
+ * IRQF_DISABLED Disable local interrupts while processing
*
- * SA_SAMPLE_RANDOM The interrupt can be used for entropy
+ * IRQF_SAMPLE_RANDOM The interrupt can be used for entropy
*
*/
@@ -542,7 +542,7 @@
struct irqaction *action;
if (irq >= NR_IRQS || !irq_desc[irq].valid || !handler ||
- (irq_flags & SA_SHIRQ && !dev_id))
+ (irq_flags & IRQF_SHARED && !dev_id))
return -EINVAL;
action = (struct irqaction *)kmalloc(sizeof(struct irqaction), GFP_KERNEL);
diff --git a/arch/arm26/kernel/time.c b/arch/arm26/kernel/time.c
index 718de9b..db63d75 100644
--- a/arch/arm26/kernel/time.c
+++ b/arch/arm26/kernel/time.c
@@ -205,7 +205,7 @@
static struct irqaction timer_irq = {
.name = "timer",
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.handler = timer_interrupt,
};
diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c
index 25df4ad..48fd801 100644
--- a/arch/cris/arch-v10/drivers/gpio.c
+++ b/arch/cris/arch-v10/drivers/gpio.c
@@ -937,11 +937,11 @@
* in some tests.
*/
if (request_irq(TIMER0_IRQ_NBR, gpio_poll_timer_interrupt,
- SA_SHIRQ | SA_INTERRUPT,"gpio poll", NULL)) {
+ IRQF_SHARED | IRQF_DISABLED,"gpio poll", NULL)) {
printk(KERN_CRIT "err: timer0 irq for gpio\n");
}
if (request_irq(PA_IRQ_NBR, gpio_pa_interrupt,
- SA_SHIRQ | SA_INTERRUPT,"gpio PA", NULL)) {
+ IRQF_SHARED | IRQF_DISABLED,"gpio PA", NULL)) {
printk(KERN_CRIT "err: PA irq for gpio\n");
}
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index fe65cb8..9c22b76 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -251,11 +251,11 @@
return IRQ_HANDLED;
}
-/* timer is SA_SHIRQ so drivers can add stuff to the timer irq chain
- * it needs to be SA_INTERRUPT to make the jiffies update work properly
+/* timer is IRQF_SHARED so drivers can add stuff to the timer irq chain
+ * it needs to be IRQF_DISABLED to make the jiffies update work properly
*/
-static struct irqaction irq2 = { timer_interrupt, SA_SHIRQ | SA_INTERRUPT,
+static struct irqaction irq2 = { timer_interrupt, IRQF_SHARED | IRQF_DISABLED,
CPU_MASK_NONE, "timer", NULL, NULL};
void __init
diff --git a/arch/cris/arch-v32/drivers/gpio.c b/arch/cris/arch-v32/drivers/gpio.c
index 113bdff..00e9167 100644
--- a/arch/cris/arch-v32/drivers/gpio.c
+++ b/arch/cris/arch-v32/drivers/gpio.c
@@ -744,11 +744,11 @@
* in some tests.
*/
if (request_irq(TIMER_INTR_VECT, gpio_poll_timer_interrupt,
- SA_SHIRQ | SA_INTERRUPT,"gpio poll", &alarmlist)) {
+ IRQF_SHARED | IRQF_DISABLED,"gpio poll", &alarmlist)) {
printk("err: timer0 irq for gpio\n");
}
if (request_irq(GEN_IO_INTR_VECT, gpio_pa_interrupt,
- SA_SHIRQ | SA_INTERRUPT,"gpio PA", &alarmlist)) {
+ IRQF_SHARED | IRQF_DISABLED,"gpio PA", &alarmlist)) {
printk("err: PA irq for gpio\n");
}
/* enable the gio and timer irq in global config */
diff --git a/arch/cris/arch-v32/kernel/arbiter.c b/arch/cris/arch-v32/kernel/arbiter.c
index 82d44c9..420a531 100644
--- a/arch/cris/arch-v32/kernel/arbiter.c
+++ b/arch/cris/arch-v32/kernel/arbiter.c
@@ -119,7 +119,7 @@
crisv32_arbiter_config(EXT_REGION);
crisv32_arbiter_config(INT_REGION);
- if (request_irq(MEMARB_INTR_VECT, crisv32_arbiter_irq, SA_INTERRUPT,
+ if (request_irq(MEMARB_INTR_VECT, crisv32_arbiter_irq, IRQF_DISABLED,
"arbiter", NULL))
printk(KERN_ERR "Couldn't allocate arbiter IRQ\n");
diff --git a/arch/cris/arch-v32/kernel/fasttimer.c b/arch/cris/arch-v32/kernel/fasttimer.c
index caaa86b..5daeb6f 100644
--- a/arch/cris/arch-v32/kernel/fasttimer.c
+++ b/arch/cris/arch-v32/kernel/fasttimer.c
@@ -981,7 +981,7 @@
proc_register_dynamic(&proc_root, &fasttimer_proc_entry);
#endif
#endif /* PROC_FS */
- if(request_irq(TIMER_INTR_VECT, timer_trig_interrupt, SA_INTERRUPT,
+ if(request_irq(TIMER_INTR_VECT, timer_trig_interrupt, IRQF_DISABLED,
"fast timer int", NULL))
{
printk("err: timer1 irq\n");
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index e2d2b3f..cc361bf 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -268,7 +268,7 @@
crisv32_do_IRQ(int irq, int block, struct pt_regs* regs)
{
/* Interrupts that may not be moved to another CPU and
- * are SA_INTERRUPT may skip blocking. This is currently
+ * are IRQF_DISABLED may skip blocking. This is currently
* only valid for the timer IRQ and the IPI and is used
* for the timer interrupt to avoid watchdog starvation.
*/
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index da40d19..464ecae 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -62,7 +62,7 @@
static irqreturn_t crisv32_ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static int send_ipi(int vector, int wait, cpumask_t cpu_mask);
-static struct irqaction irq_ipi = { crisv32_ipi_interrupt, SA_INTERRUPT,
+static struct irqaction irq_ipi = { crisv32_ipi_interrupt, IRQF_DISABLED,
CPU_MASK_NONE, "ipi", NULL, NULL};
extern void cris_mmu_init(void);
diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
index 4bac1d6..50f3f93 100644
--- a/arch/cris/arch-v32/kernel/time.c
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -241,12 +241,16 @@
return IRQ_HANDLED;
}
-/* timer is SA_SHIRQ so drivers can add stuff to the timer irq chain
- * it needs to be SA_INTERRUPT to make the jiffies update work properly
+/* timer is IRQF_SHARED so drivers can add stuff to the timer irq chain
+ * it needs to be IRQF_DISABLED to make the jiffies update work properly
*/
-static struct irqaction irq_timer = { timer_interrupt, SA_SHIRQ | SA_INTERRUPT,
- CPU_MASK_NONE, "timer", NULL, NULL};
+static struct irqaction irq_timer = {
+ .mask = timer_interrupt,
+ .flags = IRQF_SHARED | IRQF_DISABLED,
+ .mask = CPU_MASK_NONE,
+ .name = "timer"
+};
void __init
cris_timer_init(void)
diff --git a/arch/cris/kernel/irq.c b/arch/cris/kernel/irq.c
index 1f90996..903ea62 100644
--- a/arch/cris/kernel/irq.c
+++ b/arch/cris/kernel/irq.c
@@ -85,7 +85,7 @@
/* called by the assembler IRQ entry functions defined in irq.h
* to dispatch the interrupts to registred handlers
* interrupts are disabled upon entry - depending on if the
- * interrupt was registred with SA_INTERRUPT or not, interrupts
+ * interrupt was registred with IRQF_DISABLED or not, interrupts
* are re-enabled or not.
*/
diff --git a/arch/frv/kernel/irq-routing.c b/arch/frv/kernel/irq-routing.c
index b90b70a..53886ad 100644
--- a/arch/frv/kernel/irq-routing.c
+++ b/arch/frv/kernel/irq-routing.c
@@ -81,7 +81,7 @@
if (action) {
int status = 0;
-// if (!(action->flags & SA_INTERRUPT))
+// if (!(action->flags & IRQF_DISABLED))
// local_irq_enable();
do {
@@ -90,7 +90,7 @@
action = action->next;
} while (action);
- if (status & SA_SAMPLE_RANDOM)
+ if (status & IRQF_SAMPLE_RANDOM)
add_interrupt_randomness(irq);
local_irq_disable();
}
diff --git a/arch/frv/kernel/irq.c b/arch/frv/kernel/irq.c
index 5920f52..0896701 100644
--- a/arch/frv/kernel/irq.c
+++ b/arch/frv/kernel/irq.c
@@ -341,11 +341,11 @@
*
* Flags:
*
- * SA_SHIRQ Interrupt is shared
+ * IRQF_SHARED Interrupt is shared
*
- * SA_INTERRUPT Disable local interrupts while processing
+ * IRQF_DISABLED Disable local interrupts while processing
*
- * SA_SAMPLE_RANDOM The interrupt can be used for entropy
+ * IRQF_SAMPLE_RANDOM The interrupt can be used for entropy
*
*/
@@ -365,7 +365,7 @@
* to figure out which interrupt is which (messes up the
* interrupt freeing logic etc).
*/
- if (irqflags & SA_SHIRQ) {
+ if (irqflags & IRQF_SHARED) {
if (!dev_id)
printk("Bad boy: %s (at 0x%x) called us without a dev_id!\n",
devname, (&irq)[-1]);
@@ -576,7 +576,7 @@
* so we have to be careful not to interfere with a
* running system.
*/
- if (new->flags & SA_SAMPLE_RANDOM) {
+ if (new->flags & IRQF_SAMPLE_RANDOM) {
/*
* This function might sleep, we want to call it first,
* outside of the atomic block.
@@ -592,7 +592,7 @@
spin_lock_irqsave(&level->lock, flags);
/* can't share interrupts unless all parties agree to */
- if (level->usage != 0 && !(level->flags & new->flags & SA_SHIRQ)) {
+ if (level->usage != 0 && !(level->flags & new->flags & IRQF_SHARED)) {
spin_unlock_irqrestore(&level->lock,flags);
return -EBUSY;
}
diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c
index 24cf85f..d5b64e1 100644
--- a/arch/frv/kernel/time.c
+++ b/arch/frv/kernel/time.c
@@ -47,7 +47,7 @@
static irqreturn_t timer_interrupt(int irq, void *dummy, struct pt_regs *regs);
static struct irqaction timer_irq = {
- timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL
+ timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL
};
static inline int set_rtc_mmss(unsigned long nowtime)
diff --git a/arch/h8300/kernel/ints.c b/arch/h8300/kernel/ints.c
index edb3c41..1488b6a 100644
--- a/arch/h8300/kernel/ints.c
+++ b/arch/h8300/kernel/ints.c
@@ -158,7 +158,7 @@
irq_handle->devname = devname;
irq_list[irq] = irq_handle;
- if (irq_handle->flags & SA_SAMPLE_RANDOM)
+ if (irq_handle->flags & IRQF_SAMPLE_RANDOM)
rand_initialize_irq(irq);
enable_irq(irq);
@@ -222,7 +222,7 @@
if (irq_list[irq]) {
irq_list[irq]->handler(irq, irq_list[irq]->dev_id, fp);
irq_list[irq]->count++;
- if (irq_list[irq]->flags & SA_SAMPLE_RANDOM)
+ if (irq_list[irq]->flags & IRQF_SAMPLE_RANDOM)
add_interrupt_randomness(irq);
}
} else {
diff --git a/arch/h8300/platform/h8s/ints.c b/arch/h8300/platform/h8s/ints.c
index f6ed663..270440d 100644
--- a/arch/h8300/platform/h8s/ints.c
+++ b/arch/h8300/platform/h8s/ints.c
@@ -192,7 +192,7 @@
irq_handle->dev_id = dev_id;
irq_handle->devname = devname;
irq_list[irq] = irq_handle;
- if (irq_handle->flags & SA_SAMPLE_RANDOM)
+ if (irq_handle->flags & IRQF_SAMPLE_RANDOM)
rand_initialize_irq(irq);
/* enable interrupt */
@@ -270,7 +270,7 @@
if (irq_list[vec]) {
irq_list[vec]->handler(vec, irq_list[vec]->dev_id, fp);
irq_list[vec]->count++;
- if (irq_list[vec]->flags & SA_SAMPLE_RANDOM)
+ if (irq_list[vec]->flags & IRQF_SAMPLE_RANDOM)
add_interrupt_randomness(vec);
}
} else {
diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
index 5e70c2f..cbc1184 100644
--- a/arch/i386/kernel/Makefile
+++ b/arch/i386/kernel/Makefile
@@ -38,6 +38,7 @@
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_HPET_TIMER) += hpet.o
obj-$(CONFIG_K8_NB) += k8.o
+obj-$(CONFIG_AUDIT) += audit.o
EXTRA_AFLAGS := -traditional
diff --git a/arch/i386/kernel/alternative.c b/arch/i386/kernel/alternative.c
index 50eb0e0..7b421b3 100644
--- a/arch/i386/kernel/alternative.c
+++ b/arch/i386/kernel/alternative.c
@@ -168,6 +168,8 @@
}
}
+#ifdef CONFIG_SMP
+
static void alternatives_smp_save(struct alt_instr *start, struct alt_instr *end)
{
struct alt_instr *a;
@@ -328,6 +330,8 @@
spin_unlock_irqrestore(&smp_alt, flags);
}
+#endif
+
void __init alternative_instructions(void)
{
if (no_replacement) {
@@ -349,6 +353,7 @@
smp_alt_once = 1;
#endif
+#ifdef CONFIG_SMP
if (smp_alt_once) {
if (1 == num_possible_cpus()) {
printk(KERN_INFO "SMP alternatives: switching to UP code\n");
@@ -370,4 +375,5 @@
_text, _etext);
alternatives_smp_switch(0);
}
+#endif
}
diff --git a/arch/i386/kernel/audit.c b/arch/i386/kernel/audit.c
new file mode 100644
index 0000000..5a53c6f
--- /dev/null
+++ b/arch/i386/kernel/audit.c
@@ -0,0 +1,23 @@
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/audit.h>
+#include <asm/unistd.h>
+
+static unsigned dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+static unsigned chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+static int __init audit_classes_init(void)
+{
+ audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
+ audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+ return 0;
+}
+
+__initcall(audit_classes_init);
diff --git a/arch/i386/mach-default/setup.c b/arch/i386/mach-default/setup.c
index 77c8c83..c511705 100644
--- a/arch/i386/mach-default/setup.c
+++ b/arch/i386/mach-default/setup.c
@@ -79,7 +79,7 @@
{
}
-static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
+static struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL};
/**
* time_init_hook - do any specific initialisations for the system timer.
diff --git a/arch/i386/mach-visws/setup.c b/arch/i386/mach-visws/setup.c
index 1f84cdb..885c7cb 100644
--- a/arch/i386/mach-visws/setup.c
+++ b/arch/i386/mach-visws/setup.c
@@ -115,7 +115,7 @@
static struct irqaction irq0 = {
.handler = timer_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "timer",
};
diff --git a/arch/i386/mach-voyager/setup.c b/arch/i386/mach-voyager/setup.c
index 9da9ef0..cfa16c1 100644
--- a/arch/i386/mach-voyager/setup.c
+++ b/arch/i386/mach-voyager/setup.c
@@ -40,7 +40,7 @@
{
}
-static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
+static struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL};
void __init time_init_hook(void)
{
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
index dc5d897..89e8486 100644
--- a/arch/i386/mm/init.c
+++ b/arch/i386/mm/init.c
@@ -725,16 +725,15 @@
#ifdef CONFIG_DEBUG_RODATA
-extern char __start_rodata, __end_rodata;
void mark_rodata_ro(void)
{
- unsigned long addr = (unsigned long)&__start_rodata;
+ unsigned long addr = (unsigned long)__start_rodata;
- for (; addr < (unsigned long)&__end_rodata; addr += PAGE_SIZE)
+ for (; addr < (unsigned long)__end_rodata; addr += PAGE_SIZE)
change_page_attr(virt_to_page(addr), 1, PAGE_KERNEL_RO);
- printk ("Write protecting the kernel read-only data: %luk\n",
- (unsigned long)(&__end_rodata - &__start_rodata) >> 10);
+ printk("Write protecting the kernel read-only data: %uk\n",
+ (__end_rodata - __start_rodata) >> 10);
/*
* change_page_attr() requires a global_flush_tlb() call after it.
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index bdb4896..4a8995c 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -864,7 +864,7 @@
for (i = 0; i < 16; i++) {
if (!(mask & (1 << i)))
continue;
- if (pirq_penalty[i] < pirq_penalty[newirq] && can_request_irq(i, SA_SHIRQ))
+ if (pirq_penalty[i] < pirq_penalty[newirq] && can_request_irq(i, IRQF_SHARED))
newirq = i;
}
}
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index 33a3bbc..0daacc2 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -46,7 +46,7 @@
#define NR_PORTS 1 /* only one port for now */
-#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? SA_SHIRQ : SA_INTERRUPT)
+#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? IRQF_SHARED : IRQF_DISABLED)
#define SSC_GETCHAR 21
diff --git a/arch/ia64/ia32/Makefile b/arch/ia64/ia32/Makefile
index 61cb60a..baad8c7 100644
--- a/arch/ia64/ia32/Makefile
+++ b/arch/ia64/ia32/Makefile
@@ -4,6 +4,7 @@
obj-y := ia32_entry.o sys_ia32.o ia32_signal.o \
ia32_support.o ia32_traps.o binfmt_elf32.o ia32_ldt.o
+obj-$(CONFIG_AUDIT) += audit.o
# Don't let GCC uses f16-f31 so that save_ia32_fpstate_live() and
# restore_ia32_fpstate_live() can be sure the live register contain user-level state.
diff --git a/arch/ia64/ia32/audit.c b/arch/ia64/ia32/audit.c
new file mode 100644
index 0000000..ab94f2e
--- /dev/null
+++ b/arch/ia64/ia32/audit.c
@@ -0,0 +1,11 @@
+#include <asm-i386/unistd.h>
+
+unsigned ia32_dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+unsigned ia32_chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 09a0dbc..0e4553f 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -29,6 +29,7 @@
obj-$(CONFIG_IA64_MCA_RECOVERY) += mca_recovery.o
obj-$(CONFIG_KPROBES) += kprobes.o jprobes.o
obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR) += uncached.o
+obj-$(CONFIG_AUDIT) += audit.o
mca_recovery-y += mca_drv.o mca_drv_asm.o
# The gate DSO image is built using a special linker script.
diff --git a/arch/ia64/kernel/audit.c b/arch/ia64/kernel/audit.c
new file mode 100644
index 0000000..f251293
--- /dev/null
+++ b/arch/ia64/kernel/audit.c
@@ -0,0 +1,29 @@
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/audit.h>
+#include <asm/unistd.h>
+
+static unsigned dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+static unsigned chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+static int __init audit_classes_init(void)
+{
+#ifdef CONFIG_IA32_SUPPORT
+ extern __u32 ia32_dir_class[];
+ extern __u32 ia32_chattr_class[];
+ audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class);
+ audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class);
+#endif
+ audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
+ audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+ return 0;
+}
+
+__initcall(audit_classes_init);
diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
index 3e6fcb0..a041367 100644
--- a/arch/ia64/kernel/irq_ia64.c
+++ b/arch/ia64/kernel/irq_ia64.c
@@ -235,7 +235,7 @@
static struct irqaction ipi_irqaction = {
.handler = handle_IPI,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "IPI"
};
#endif
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 584df17..eb8e8dc 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1457,38 +1457,38 @@
static struct irqaction cmci_irqaction = {
.handler = ia64_mca_cmc_int_handler,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "cmc_hndlr"
};
static struct irqaction cmcp_irqaction = {
.handler = ia64_mca_cmc_int_caller,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "cmc_poll"
};
static struct irqaction mca_rdzv_irqaction = {
.handler = ia64_mca_rendez_int_handler,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "mca_rdzv"
};
static struct irqaction mca_wkup_irqaction = {
.handler = ia64_mca_wakeup_int_handler,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "mca_wkup"
};
#ifdef CONFIG_ACPI
static struct irqaction mca_cpe_irqaction = {
.handler = ia64_mca_cpe_int_handler,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "cpe_hndlr"
};
static struct irqaction mca_cpep_irqaction = {
.handler = ia64_mca_cpe_int_caller,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "cpe_poll"
};
#endif /* CONFIG_ACPI */
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 92b815d..c7ccd6e 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -6439,7 +6439,7 @@
static struct irqaction perfmon_irqaction = {
.handler = pfm_interrupt_handler,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "perfmon"
};
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 71ccdda..6928ef0 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -231,7 +231,7 @@
static struct irqaction timer_irqaction = {
.handler = timer_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "timer"
};
diff --git a/arch/ia64/sn/kernel/huberror.c b/arch/ia64/sn/kernel/huberror.c
index 56ab6ba..96fb81e 100644
--- a/arch/ia64/sn/kernel/huberror.c
+++ b/arch/ia64/sn/kernel/huberror.c
@@ -178,7 +178,7 @@
*/
void hub_error_init(struct hubdev_info *hubdev_info)
{
- if (request_irq(SGI_II_ERROR, (void *)hub_eint_handler, SA_SHIRQ,
+ if (request_irq(SGI_II_ERROR, (void *)hub_eint_handler, IRQF_SHARED,
"SN_hub_error", (void *)hubdev_info))
printk("hub_error_init: Failed to request_irq for 0x%p\n",
hubdev_info);
@@ -196,7 +196,7 @@
void ice_error_init(struct hubdev_info *hubdev_info)
{
if (request_irq
- (SGI_TIO_ERROR, (void *)hub_eint_handler, SA_SHIRQ, "SN_TIO_error",
+ (SGI_TIO_ERROR, (void *)hub_eint_handler, IRQF_SHARED, "SN_TIO_error",
(void *)hubdev_info))
printk("ice_error_init: request_irq() error hubdev_info 0x%p\n",
hubdev_info);
diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c
index 8255a9b..c2f69f7 100644
--- a/arch/ia64/sn/kernel/xpc_channel.c
+++ b/arch/ia64/sn/kernel/xpc_channel.c
@@ -202,7 +202,7 @@
init_waitqueue_head(&part->channel_mgr_wq);
sprintf(part->IPI_owner, "xpc%02d", partid);
- ret = request_irq(SGI_XPC_NOTIFY, xpc_notify_IRQ_handler, SA_SHIRQ,
+ ret = request_irq(SGI_XPC_NOTIFY, xpc_notify_IRQ_handler, IRQF_SHARED,
part->IPI_owner, (void *) (u64) partid);
if (ret != 0) {
dev_err(xpc_chan, "can't register NOTIFY IRQ handler, "
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
index ab1211e..838c93c 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
@@ -139,7 +139,7 @@
* register the bridge's error interrupt handler
*/
if (request_irq(SGI_PCIASIC_ERROR, (void *)pcibr_error_intr_handler,
- SA_SHIRQ, "PCIBR error", (void *)(soft))) {
+ IRQF_SHARED, "PCIBR error", (void *)(soft))) {
printk(KERN_WARNING
"pcibr cannot allocate interrupt for error handler\n");
}
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index e4aa839..c36b0f5 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -646,7 +646,7 @@
if (request_irq(SGI_TIOCA_ERROR,
tioca_error_intr_handler,
- SA_SHIRQ, "TIOCA error", (void *)tioca_common))
+ IRQF_SHARED, "TIOCA error", (void *)tioca_common))
printk(KERN_WARNING
"%s: Unable to get irq %d. "
"Error interrupts won't be routed for TIOCA bus %d\n",
diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c
index 2d79485..17cd342 100644
--- a/arch/ia64/sn/pci/tioce_provider.c
+++ b/arch/ia64/sn/pci/tioce_provider.c
@@ -1027,7 +1027,7 @@
if (request_irq(SGI_PCIASIC_ERROR,
tioce_error_intr_handler,
- SA_SHIRQ, "TIOCE error", (void *)tioce_common))
+ IRQF_SHARED, "TIOCE error", (void *)tioce_common))
printk(KERN_WARNING
"%s: Unable to get irq %d. "
"Error interrupts won't be routed for "
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index efff6f5..ded0be0 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -237,7 +237,7 @@
return IRQ_HANDLED;
}
-struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE,
+struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE,
"MFT2", NULL, NULL };
void __init time_init(void)
diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c
index f9403f4..96c79d8 100644
--- a/arch/m68k/amiga/amiints.c
+++ b/arch/m68k/amiga/amiints.c
@@ -22,7 +22,7 @@
*
* 07/08/99: rewamp of the interrupt handling - we now have two types of
* interrupts, normal and fast handlers, fast handlers being
- * marked with SA_INTERRUPT and runs with all other interrupts
+ * marked with IRQF_DISABLED and runs with all other interrupts
* disabled. Normal interrupts disable their own source but
* run with all other interrupt sources enabled.
* PORTS and EXTER interrupts are always shared even if the
diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c
index 0956e45..dbad300 100644
--- a/arch/m68k/amiga/cia.c
+++ b/arch/m68k/amiga/cia.c
@@ -176,5 +176,5 @@
/* override auto int and install CIA handler */
m68k_setup_irq_controller(&auto_irq_controller, base->handler_irq, 1);
m68k_irq_startup(base->handler_irq);
- request_irq(base->handler_irq, cia_handler, SA_SHIRQ, base->name, base);
+ request_irq(base->handler_irq, cia_handler, IRQF_SHARED, base->name, base);
}
diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c
index e969f04..b33e37f 100644
--- a/arch/m68k/kernel/ints.c
+++ b/arch/m68k/kernel/ints.c
@@ -192,7 +192,7 @@
prev = irq_list + irq;
if (*prev) {
/* Can't share interrupts unless both agree to */
- if (!((*prev)->flags & node->flags & SA_SHIRQ)) {
+ if (!((*prev)->flags & node->flags & IRQF_SHARED)) {
spin_unlock_irqrestore(&contr->lock, flags);
return -EBUSY;
}
diff --git a/arch/m68knommu/platform/5307/pit.c b/arch/m68knommu/platform/5307/pit.c
index 994c893..9dc5688 100644
--- a/arch/m68knommu/platform/5307/pit.c
+++ b/arch/m68knommu/platform/5307/pit.c
@@ -48,7 +48,7 @@
volatile unsigned char *icrp;
volatile unsigned long *imrp;
- request_irq(MCFINT_VECBASE + MCFINT_PIT1, handler, SA_INTERRUPT,
+ request_irq(MCFINT_VECBASE + MCFINT_PIT1, handler, IRQF_DISABLED,
"ColdFire Timer", NULL);
icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 +
diff --git a/arch/m68knommu/platform/5307/timers.c b/arch/m68knommu/platform/5307/timers.c
index c3a9755..24781f0 100644
--- a/arch/m68knommu/platform/5307/timers.c
+++ b/arch/m68knommu/platform/5307/timers.c
@@ -61,7 +61,7 @@
__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
- request_irq(mcf_timervector, handler, SA_INTERRUPT, "timer", NULL);
+ request_irq(mcf_timervector, handler, IRQF_DISABLED, "timer", NULL);
mcf_settimericr(1, mcf_timerlevel);
#ifdef CONFIG_HIGHPROFILE
@@ -125,7 +125,7 @@
MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
request_irq(mcf_profilevector, coldfire_profile_tick,
- (SA_INTERRUPT | IRQ_FLG_FAST), "profile timer", NULL);
+ (IRQF_DISABLED | IRQ_FLG_FAST), "profile timer", NULL);
mcf_settimericr(2, 7);
}
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index 69cabb7..98244d5 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -892,7 +892,7 @@
#error Unknown Au1x00 SOC
#endif
- if (request_irq(irq_nr, dbdma_interrupt, SA_INTERRUPT,
+ if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
"Au1xxx dbdma", (void *)dbdma_gptr))
printk("Can't get 1550 dbdma irq");
}
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c
index c0d56c1..29d6f81 100644
--- a/arch/mips/au1000/common/irq.c
+++ b/arch/mips/au1000/common/irq.c
@@ -309,7 +309,7 @@
* can avoid it. --cgray
*/
action.dev_id = handler;
- action.flags = SA_INTERRUPT;
+ action.flags = IRQF_DISABLED;
cpus_clear(action.mask);
action.name = "Au1xxx TOY";
action.handler = handler;
diff --git a/arch/mips/au1000/common/usbdev.c b/arch/mips/au1000/common/usbdev.c
index 2cab762..63bcb3a 100644
--- a/arch/mips/au1000/common/usbdev.c
+++ b/arch/mips/au1000/common/usbdev.c
@@ -1465,14 +1465,14 @@
*/
/* request the USB device transfer complete interrupt */
- if (request_irq(AU1000_USB_DEV_REQ_INT, req_sus_intr, SA_INTERRUPT,
+ if (request_irq(AU1000_USB_DEV_REQ_INT, req_sus_intr, IRQF_DISABLED,
"USBdev req", &usbdev)) {
err("Can't get device request intr");
ret = -ENXIO;
goto out;
}
/* request the USB device suspend interrupt */
- if (request_irq(AU1000_USB_DEV_SUS_INT, req_sus_intr, SA_INTERRUPT,
+ if (request_irq(AU1000_USB_DEV_SUS_INT, req_sus_intr, IRQF_DISABLED,
"USBdev sus", &usbdev)) {
err("Can't get device suspend intr");
ret = -ENXIO;
@@ -1483,7 +1483,7 @@
if ((ep0->indma = request_au1000_dma(ep_dma_id[0].id,
ep_dma_id[0].str,
dma_done_ep0_intr,
- SA_INTERRUPT,
+ IRQF_DISABLED,
&usbdev)) < 0) {
err("Can't get %s DMA", ep_dma_id[0].str);
ret = -ENXIO;
@@ -1516,7 +1516,7 @@
request_au1000_dma(ep_dma_id[ep->address].id,
ep_dma_id[ep->address].str,
dma_done_ep_intr,
- SA_INTERRUPT,
+ IRQF_DISABLED,
&usbdev);
if (ep->indma < 0) {
err("Can't get %s DMA",
diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c
index 91121e5..b288151 100644
--- a/arch/mips/basler/excite/excite_iodev.c
+++ b/arch/mips/basler/excite/excite_iodev.c
@@ -113,7 +113,7 @@
static int iodev_open(struct inode *i, struct file *f)
{
- return request_irq(iodev_irq, iodev_irqhdl, SA_INTERRUPT,
+ return request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED,
iodev_name, &miscdev);
}
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index 9c707b9..2684f12 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -105,7 +105,7 @@
};
static struct irqaction busirq = {
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "bus error",
};
@@ -124,7 +124,7 @@
case MACH_DS23100: /* DS2100/DS3100 Pmin/Pmax */
board_be_handler = dec_kn01_be_handler;
busirq.handler = dec_kn01_be_interrupt;
- busirq.flags |= SA_SHIRQ;
+ busirq.flags |= IRQF_SHARED;
dec_kn01_be_init();
break;
case MACH_DS5000_1XX: /* DS5000/1xx 3min */
diff --git a/arch/mips/gt64120/common/time.c b/arch/mips/gt64120/common/time.c
index c64a772..d837b26 100644
--- a/arch/mips/gt64120/common/time.c
+++ b/arch/mips/gt64120/common/time.c
@@ -77,7 +77,7 @@
* the values to the correct interrupt line.
*/
timer.handler = gt64120_irq;
- timer.flags = SA_SHIRQ | SA_INTERRUPT;
+ timer.flags = IRQF_SHARED | IRQF_DISABLED;
timer.name = "timer";
timer.dev_id = NULL;
timer.next = NULL;
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index caf777f..cdab1b2 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -487,7 +487,7 @@
static struct irqaction rtlx_irq = {
.handler = rtlx_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "RTLX",
};
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 5777090..93429a4 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -130,13 +130,13 @@
static struct irqaction irq_resched = {
.handler = ipi_resched_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "IPI_resched"
};
static struct irqaction irq_call = {
.handler = ipi_call_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "IPI_call"
};
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 70cf09a..a48d9e5 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -1002,7 +1002,7 @@
set_vi_handler(MIPS_CPU_IPI_IRQ, ipi_irq_dispatch);
irq_ipi.handler = ipi_interrupt;
- irq_ipi.flags = SA_INTERRUPT;
+ irq_ipi.flags = IRQF_DISABLED;
irq_ipi.name = "SMTC_IPI";
setup_irq_smtc(cpu_ipi_irq, &irq_ipi, (0x100 << MIPS_CPU_IPI_IRQ));
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index c2b1fcf..2393c11 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -579,7 +579,7 @@
static struct irqaction timer_irqaction = {
.handler = timer_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "timer",
};
diff --git a/arch/mips/momentum/jaguar_atx/irq.c b/arch/mips/momentum/jaguar_atx/irq.c
index ec4032b..f906746 100644
--- a/arch/mips/momentum/jaguar_atx/irq.c
+++ b/arch/mips/momentum/jaguar_atx/irq.c
@@ -71,7 +71,7 @@
}
static struct irqaction cascade_mv64340 = {
- no_action, SA_INTERRUPT, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL
+ no_action, IRQF_DISABLED, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL
};
void __init arch_init_irq(void)
diff --git a/arch/mips/momentum/ocelot_3/irq.c b/arch/mips/momentum/ocelot_3/irq.c
index 87c63c3..793782a 100644
--- a/arch/mips/momentum/ocelot_3/irq.c
+++ b/arch/mips/momentum/ocelot_3/irq.c
@@ -54,7 +54,7 @@
#include <asm/system.h>
static struct irqaction cascade_mv64340 = {
- no_action, SA_INTERRUPT, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL
+ no_action, IRQF_DISABLED, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL
};
void __init arch_init_irq(void)
diff --git a/arch/mips/momentum/ocelot_c/irq.c b/arch/mips/momentum/ocelot_c/irq.c
index 86f61ce..9d44ae1 100644
--- a/arch/mips/momentum/ocelot_c/irq.c
+++ b/arch/mips/momentum/ocelot_c/irq.c
@@ -52,11 +52,11 @@
extern void cpci_irq_init(void);
static struct irqaction cascade_fpga = {
- no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade via FPGA", NULL, NULL
+ no_action, IRQF_DISABLED, CPU_MASK_NONE, "cascade via FPGA", NULL, NULL
};
static struct irqaction cascade_mv64340 = {
- no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade via MV64340", NULL, NULL
+ no_action, IRQF_DISABLED, CPU_MASK_NONE, "cascade via MV64340", NULL, NULL
};
extern void ll_uart_irq(struct pt_regs *regs);
diff --git a/arch/mips/momentum/ocelot_g/gt-irq.c b/arch/mips/momentum/ocelot_g/gt-irq.c
index 047457f..9fb2493 100644
--- a/arch/mips/momentum/ocelot_g/gt-irq.c
+++ b/arch/mips/momentum/ocelot_g/gt-irq.c
@@ -173,7 +173,7 @@
* the values to the correct interrupt line.
*/
timer.handler = >64240_p0int_irq;
- timer.flags = SA_SHIRQ | SA_INTERRUPT;
+ timer.flags = IRQF_SHARED | IRQF_DISABLED;
timer.name = "timer";
timer.dev_id = NULL;
timer.next = NULL;
diff --git a/arch/mips/philips/pnx8550/common/int.c b/arch/mips/philips/pnx8550/common/int.c
index 388a4df..8aca317 100644
--- a/arch/mips/philips/pnx8550/common/int.c
+++ b/arch/mips/philips/pnx8550/common/int.c
@@ -219,13 +219,13 @@
static struct irqaction gic_action = {
.handler = no_action,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "GIC",
};
static struct irqaction timer_action = {
.handler = no_action,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "Timer",
};
diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c
index aee567d..2d87628 100644
--- a/arch/mips/sgi-ip22/ip22-int.c
+++ b/arch/mips/sgi-ip22/ip22-int.c
@@ -272,32 +272,32 @@
static struct irqaction local0_cascade = {
.handler = no_action,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "local0 cascade",
};
static struct irqaction local1_cascade = {
.handler = no_action,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "local1 cascade",
};
static struct irqaction buserr = {
.handler = no_action,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "Bus Error",
};
static struct irqaction map0_cascade = {
.handler = no_action,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "mapable0 cascade",
};
#ifdef USE_LIO3_IRQ
static struct irqaction map1_cascade = {
.handler = no_action,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "mapable1 cascade",
};
#define SGI_INTERRUPTS SGINT_END
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index a94e4c7..597ec73 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -118,7 +118,7 @@
}
/*
- * This code is unnecessarily complex, because we do SA_INTERRUPT
+ * This code is unnecessarily complex, because we do IRQF_DISABLED
* intr enabling. Basically, once we grab the set of intrs we need
* to service, we must mask _all_ these interrupts; firstly, to make
* sure the same intr does not intr again, causing recursion that
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 1fb860c..3ca614a 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -217,7 +217,7 @@
static struct irqaction rt_irqaction = {
.handler = ip27_rt_timer_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "timer"
};
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index 00b94aa..3b7e74b 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -125,9 +125,9 @@
extern irqreturn_t crime_cpuerr_intr (int irq, void *dev_id,
struct pt_regs *regs);
-struct irqaction memerr_irq = { crime_memerr_intr, SA_INTERRUPT,
+struct irqaction memerr_irq = { crime_memerr_intr, IRQF_DISABLED,
CPU_MASK_NONE, "CRIME memory error", NULL, NULL };
-struct irqaction cpuerr_irq = { crime_cpuerr_intr, SA_INTERRUPT,
+struct irqaction cpuerr_irq = { crime_cpuerr_intr, IRQF_DISABLED,
CPU_MASK_NONE, "CRIME CPU error", NULL, NULL };
/*
@@ -316,9 +316,9 @@
MACEISA_KEYB_POLL_INT | \
MACEISA_MOUSE_INT | \
MACEISA_MOUSE_POLL_INT | \
- MACEISA_TIMER0_INT | \
- MACEISA_TIMER1_INT | \
- MACEISA_TIMER2_INT)
+ MACEIIRQF_TIMER0_INT | \
+ MACEIIRQF_TIMER1_INT | \
+ MACEIIRQF_TIMER2_INT)
#define MACEISA_SUPERIO_INT (MACEISA_PARALLEL_INT | \
MACEISA_PAR_CTXA_INT | \
MACEISA_PAR_CTXB_INT | \
@@ -349,7 +349,7 @@
case MACEISA_AUDIO_SW_IRQ ... MACEISA_AUDIO3_MERR_IRQ:
crime_int = MACE_AUDIO_INT;
break;
- case MACEISA_RTC_IRQ ... MACEISA_TIMER2_IRQ:
+ case MACEISA_RTC_IRQ ... MACEIIRQF_TIMER2_IRQ:
crime_int = MACE_MISC_INT;
break;
case MACEISA_PARALLEL_IRQ ... MACEISA_SERIAL2_RDMAOR_IRQ:
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
index ee943cb..ec0a0de 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
@@ -337,7 +337,7 @@
}
//#define TOSHIBA_RBTX4927_PIC_ACTION(s) { no_action, 0, CPU_MASK_NONE, s, NULL, NULL }
-#define TOSHIBA_RBTX4927_PIC_ACTION(s) { no_action, SA_SHIRQ, CPU_MASK_NONE, s, NULL, NULL }
+#define TOSHIBA_RBTX4927_PIC_ACTION(s) { no_action, IRQF_SHARED, CPU_MASK_NONE, s, NULL, NULL }
static struct irqaction toshiba_rbtx4927_irq_ioc_action =
TOSHIBA_RBTX4927_PIC_ACTION(TOSHIBA_RBTX4927_IOC_NAME);
#ifdef CONFIG_TOSHIBA_FPCIB0
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 52761d9..5b8803c 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -366,14 +366,14 @@
static struct irqaction timer_action = {
.handler = timer_interrupt,
.name = "timer",
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
};
#ifdef CONFIG_SMP
static struct irqaction ipi_action = {
.handler = ipi_interrupt,
.name = "IPI",
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
};
#endif
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index b64602a..f2b96f1 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -27,6 +27,7 @@
#include <asm/tlb.h>
#include <asm/pdc_chassis.h>
#include <asm/mmzone.h>
+#include <asm/sections.h>
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -417,11 +418,10 @@
#ifdef CONFIG_DEBUG_RODATA
void mark_rodata_ro(void)
{
- extern char __start_rodata, __end_rodata;
/* rodata memory was already mapped with KERNEL_RO access rights by
pagetable_init() and map_pages(). No need to do additional stuff here */
printk (KERN_INFO "Write protecting the kernel read-only data: %luk\n",
- (unsigned long)(&__end_rodata - &__start_rodata) >> 10);
+ (unsigned long)(__end_rodata - __start_rodata) >> 10);
}
#endif
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 880c808..22da133 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -304,11 +304,11 @@
int irq;
irq = iic_ipi_to_irq(ipi);
- /* IPIs are marked SA_INTERRUPT as they must run with irqs
+ /* IPIs are marked IRQF_DISABLED as they must run with irqs
* disabled */
get_irq_desc(irq)->chip = &iic_pic;
get_irq_desc(irq)->status |= IRQ_PER_CPU;
- request_irq(irq, iic_ipi_action, SA_INTERRUPT, name, NULL);
+ request_irq(irq, iic_ipi_action, IRQF_DISABLED, name, NULL);
}
void iic_request_IPIs(void)
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index b306723..656c1ef 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -274,19 +274,19 @@
snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number);
ret = request_irq(irq_base + spu->isrc,
- spu_irq_class_0, SA_INTERRUPT, spu->irq_c0, spu);
+ spu_irq_class_0, IRQF_DISABLED, spu->irq_c0, spu);
if (ret)
goto out;
snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number);
ret = request_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc,
- spu_irq_class_1, SA_INTERRUPT, spu->irq_c1, spu);
+ spu_irq_class_1, IRQF_DISABLED, spu->irq_c1, spu);
if (ret)
goto out1;
snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number);
ret = request_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc,
- spu_irq_class_2, SA_INTERRUPT, spu->irq_c2, spu);
+ spu_irq_class_2, IRQF_DISABLED, spu->irq_c2, spu);
if (ret)
goto out2;
goto out;
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 532bce5..c9b09a9 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -381,7 +381,7 @@
static struct irqaction gatwick_cascade_action = {
.handler = gatwick_action,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "cascade",
};
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 63affcb..827b712 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -377,7 +377,7 @@
static struct irqaction psurge_irqaction = {
.handler = psurge_primary_intr,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "primary IPI",
};
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 4d935d0..2ffebe3 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -59,7 +59,7 @@
/*
* Mark IPIs as higher priority so we can take them inside interrupts that
- * arent marked SA_INTERRUPT
+ * arent marked IRQF_DISABLED
*/
#define IPI_PRIORITY 4
@@ -586,9 +586,12 @@
{
virt_irq_to_real_map[XICS_IPI] = XICS_IPI;
- /* IPIs are marked SA_INTERRUPT as they must run with irqs disabled */
- request_irq(irq_offset_up(XICS_IPI), xics_ipi_action, SA_INTERRUPT,
- "IPI", NULL);
+ /*
+ * IPIs are marked IRQF_DISABLED as they must run with irqs
+ * disabled
+ */
+ request_irq(irq_offset_up(XICS_IPI), xics_ipi_action,
+ IRQF_DISABLED, "IPI", NULL);
get_irq_desc(irq_offset_up(XICS_IPI))->status |= IRQ_PER_CPU;
}
#endif
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index 2bff30f..1a3ef1a 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -167,7 +167,7 @@
static struct irqaction i8259_irqaction = {
.handler = no_action,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "82c59 secondary cascade",
};
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 63ff895..7e46935 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -540,7 +540,7 @@
* IPIs are marked IRQ_PER_CPU. This has the side effect of
* preventing the IRQ_PENDING/IRQ_INPROGRESS logic from
* applying to them. We EOI them late to avoid re-entering.
- * We mark IPI's with SA_INTERRUPT as they must run with
+ * We mark IPI's with IRQF_DISABLED as they must run with
* irqs disabled.
*/
mpic_eoi(mpic);
@@ -1027,14 +1027,17 @@
printk("requesting IPIs ... \n");
- /* IPIs are marked SA_INTERRUPT as they must run with irqs disabled */
- request_irq(mpic->ipi_offset+0, mpic_ipi_action, SA_INTERRUPT,
+ /*
+ * IPIs are marked IRQF_DISABLED as they must run with irqs
+ * disabled
+ */
+ request_irq(mpic->ipi_offset+0, mpic_ipi_action, IRQF_DISABLED,
"IPI0 (call function)", mpic);
- request_irq(mpic->ipi_offset+1, mpic_ipi_action, SA_INTERRUPT,
+ request_irq(mpic->ipi_offset+1, mpic_ipi_action, IRQF_DISABLED,
"IPI1 (reschedule)", mpic);
- request_irq(mpic->ipi_offset+2, mpic_ipi_action, SA_INTERRUPT,
+ request_irq(mpic->ipi_offset+2, mpic_ipi_action, IRQF_DISABLED,
"IPI2 (unused)", mpic);
- request_irq(mpic->ipi_offset+3, mpic_ipi_action, SA_INTERRUPT,
+ request_irq(mpic->ipi_offset+3, mpic_ipi_action, IRQF_DISABLED,
"IPI3 (debugger break)", mpic);
printk("IPIs requested... \n");
diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c
index cd5f3fa..e347fe8 100644
--- a/arch/ppc/8260_io/fcc_enet.c
+++ b/arch/ppc/8260_io/fcc_enet.c
@@ -2116,7 +2116,7 @@
#ifdef PHY_INTERRUPT
#ifdef CONFIG_ADS8272
- if (request_irq(PHY_INTERRUPT, mii_link_interrupt, SA_SHIRQ,
+ if (request_irq(PHY_INTERRUPT, mii_link_interrupt, IRQF_SHARED,
"mii", dev) < 0)
printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT);
#else
diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c
index 026ace3..d90cd24 100644
--- a/arch/ppc/platforms/85xx/mpc8560_ads.c
+++ b/arch/ppc/platforms/85xx/mpc8560_ads.c
@@ -131,7 +131,7 @@
static struct irqaction cpm2_irqaction = {
.handler = cpm2_cascade,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "cpm2_cascade",
};
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
index 139cf0d..7520458 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
@@ -136,7 +136,7 @@
static struct irqaction cpm2_irqaction = {
.handler = cpm2_cascade,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "cpm2_cascade",
};
diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c
index 2246124..495aa79 100644
--- a/arch/ppc/platforms/85xx/stx_gp3.c
+++ b/arch/ppc/platforms/85xx/stx_gp3.c
@@ -166,7 +166,7 @@
static struct irqaction cpm2_irqaction = {
.handler = cpm2_cascade,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "cpm2_cascade",
};
diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c
index 1c90f11..189ed41 100644
--- a/arch/ppc/platforms/85xx/tqm85xx.c
+++ b/arch/ppc/platforms/85xx/tqm85xx.c
@@ -190,7 +190,7 @@
static struct irqaction cpm2_irqaction = {
.handler = cpm2_cascade,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "cpm2_cascade",
};
diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c
index 71af4b4..e0f112a 100644
--- a/arch/ppc/platforms/hdpu.c
+++ b/arch/ppc/platforms/hdpu.c
@@ -837,7 +837,7 @@
mv64x60_write(&bh, MV64360_CPU0_DOORBELL_CLR, 0xff);
mv64x60_write(&bh, MV64360_CPU0_DOORBELL_MASK, 0xff);
request_irq(60, hdpu_smp_cpu0_int_handler,
- SA_INTERRUPT, hdpu_smp0, 0);
+ IRQF_DISABLED, hdpu_smp0, 0);
}
if (cpu_nr == 1) {
@@ -857,7 +857,7 @@
mv64x60_write(&bh, MV64360_CPU1_DOORBELL_CLR, 0x0);
mv64x60_write(&bh, MV64360_CPU1_DOORBELL_MASK, 0xff);
request_irq(28, hdpu_smp_cpu1_int_handler,
- SA_INTERRUPT, hdpu_smp1, 0);
+ IRQF_DISABLED, hdpu_smp1, 0);
}
}
diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c
index 97d6c21..3bb530a 100644
--- a/arch/ppc/platforms/radstone_ppc7d.c
+++ b/arch/ppc/platforms/radstone_ppc7d.c
@@ -1310,7 +1310,7 @@
/* Hook up i8259 interrupt which is connected to GPP28 */
request_irq(mv64360_irq_base + MV64x60_IRQ_GPP28, ppc7d_i8259_intr,
- SA_INTERRUPT, "I8259 (GPP28) interrupt", (void *)0);
+ IRQF_DISABLED, "I8259 (GPP28) interrupt", (void *)0);
/* Configure MPP16 as watchdog NMI, MPP17 as watchdog WDE */
spin_lock_irqsave(&mv64x60_lock, flags);
diff --git a/arch/ppc/platforms/sbc82xx.c b/arch/ppc/platforms/sbc82xx.c
index 8cff1e3..60b769c 100644
--- a/arch/ppc/platforms/sbc82xx.c
+++ b/arch/ppc/platforms/sbc82xx.c
@@ -145,7 +145,7 @@
static struct irqaction sbc82xx_i8259_irqaction = {
.handler = sbc82xx_i8259_demux,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "i8259 demux",
};
diff --git a/arch/ppc/syslib/gt64260_pic.c b/arch/ppc/syslib/gt64260_pic.c
index 91096b3..7fd550a 100644
--- a/arch/ppc/syslib/gt64260_pic.c
+++ b/arch/ppc/syslib/gt64260_pic.c
@@ -297,7 +297,7 @@
/* Register CPU interface error interrupt handler */
if ((rc = request_irq(MV64x60_IRQ_CPU_ERR,
- gt64260_cpu_error_int_handler, SA_INTERRUPT, CPU_INTR_STR, 0)))
+ gt64260_cpu_error_int_handler, IRQF_DISABLED, CPU_INTR_STR, 0)))
printk(KERN_WARNING "Can't register cpu error handler: %d", rc);
mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0);
@@ -305,7 +305,7 @@
/* Register PCI 0 error interrupt handler */
if ((rc = request_irq(MV64360_IRQ_PCI0, gt64260_pci_error_int_handler,
- SA_INTERRUPT, PCI0_INTR_STR, (void *)0)))
+ IRQF_DISABLED, PCI0_INTR_STR, (void *)0)))
printk(KERN_WARNING "Can't register pci 0 error handler: %d",
rc);
@@ -314,7 +314,7 @@
/* Register PCI 1 error interrupt handler */
if ((rc = request_irq(MV64360_IRQ_PCI1, gt64260_pci_error_int_handler,
- SA_INTERRUPT, PCI1_INTR_STR, (void *)1)))
+ IRQF_DISABLED, PCI1_INTR_STR, (void *)1)))
printk(KERN_WARNING "Can't register pci 1 error handler: %d",
rc);
diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c
index 0440d8f..4b77e6c 100644
--- a/arch/ppc/syslib/ibm440gx_common.c
+++ b/arch/ppc/syslib/ibm440gx_common.c
@@ -149,7 +149,7 @@
unsigned long flags;
/* Install error handler */
- if (request_irq(87, l2c_error_handler, SA_INTERRUPT, "L2C", 0) < 0){
+ if (request_irq(87, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0){
printk(KERN_ERR "Cannot install L2C error handler, cache is not enabled\n");
return;
}
diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c
index 63fa5b3..d3fa264 100644
--- a/arch/ppc/syslib/m82xx_pci.c
+++ b/arch/ppc/syslib/m82xx_pci.c
@@ -139,7 +139,7 @@
static struct irqaction pq2pci_irqaction = {
.handler = pq2pci_irq_demux,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "PQ2 PCI cascade",
};
diff --git a/arch/ppc/syslib/mv64360_pic.c b/arch/ppc/syslib/mv64360_pic.c
index a4244d4..3f6d162 100644
--- a/arch/ppc/syslib/mv64360_pic.c
+++ b/arch/ppc/syslib/mv64360_pic.c
@@ -380,7 +380,7 @@
/* Clear old errors and register CPU interface error intr handler */
mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
if ((rc = request_irq(MV64x60_IRQ_CPU_ERR + mv64360_irq_base,
- mv64360_cpu_error_int_handler, SA_INTERRUPT, CPU_INTR_STR, 0)))
+ mv64360_cpu_error_int_handler, IRQF_DISABLED, CPU_INTR_STR, 0)))
printk(KERN_WARNING "Can't register cpu error handler: %d", rc);
mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0);
@@ -389,14 +389,14 @@
/* Clear old errors and register internal SRAM error intr handler */
mv64x60_write(&bh, MV64360_SRAM_ERR_CAUSE, 0);
if ((rc = request_irq(MV64360_IRQ_SRAM_PAR_ERR + mv64360_irq_base,
- mv64360_sram_error_int_handler,SA_INTERRUPT,SRAM_INTR_STR, 0)))
+ mv64360_sram_error_int_handler,IRQF_DISABLED,SRAM_INTR_STR, 0)))
printk(KERN_WARNING "Can't register SRAM error handler: %d",rc);
/* Clear old errors and register PCI 0 error intr handler */
mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, 0);
if ((rc = request_irq(MV64360_IRQ_PCI0 + mv64360_irq_base,
mv64360_pci_error_int_handler,
- SA_INTERRUPT, PCI0_INTR_STR, (void *)0)))
+ IRQF_DISABLED, PCI0_INTR_STR, (void *)0)))
printk(KERN_WARNING "Can't register pci 0 error handler: %d",
rc);
@@ -411,7 +411,7 @@
mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, 0);
if ((rc = request_irq(MV64360_IRQ_PCI1 + mv64360_irq_base,
mv64360_pci_error_int_handler,
- SA_INTERRUPT, PCI1_INTR_STR, (void *)1)))
+ IRQF_DISABLED, PCI1_INTR_STR, (void *)1)))
printk(KERN_WARNING "Can't register pci 1 error handler: %d",
rc);
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
index 0897366..aa0b957 100644
--- a/arch/ppc/syslib/open_pic.c
+++ b/arch/ppc/syslib/open_pic.c
@@ -575,18 +575,21 @@
if (OpenPIC == NULL)
return;
- /* IPIs are marked SA_INTERRUPT as they must run with irqs disabled */
+ /*
+ * IPIs are marked IRQF_DISABLED as they must run with irqs
+ * disabled
+ */
request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset,
- openpic_ipi_action, SA_INTERRUPT,
+ openpic_ipi_action, IRQF_DISABLED,
"IPI0 (call function)", NULL);
request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+1,
- openpic_ipi_action, SA_INTERRUPT,
+ openpic_ipi_action, IRQF_DISABLED,
"IPI1 (reschedule)", NULL);
request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+2,
- openpic_ipi_action, SA_INTERRUPT,
+ openpic_ipi_action, IRQF_DISABLED,
"IPI2 (invalidate tlb)", NULL);
request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+3,
- openpic_ipi_action, SA_INTERRUPT,
+ openpic_ipi_action, IRQF_DISABLED,
"IPI3 (xmon break)", NULL);
for ( i = 0; i < OPENPIC_NUM_IPI ; i++ )
@@ -691,7 +694,7 @@
static struct irqaction openpic_cascade_irqaction = {
.handler = no_action,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
};
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 1a434a7..d8948c3 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -228,8 +228,9 @@
sysc_nr_ok:
mvc SP_ARGS(4,%r15),SP_R7(%r15)
sysc_do_restart:
+ l %r8,BASED(.Lsysc_table)
tm __TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
- l %r8,sys_call_table-system_call(%r7,%r13) # get system call addr.
+ l %r8,0(%r7,%r8) # get system call addr.
bnz BASED(sysc_tracesys)
basr %r14,%r8 # call sys_xxxx
st %r2,SP_R2(%r15) # store return value (change R2 on stack)
@@ -330,9 +331,10 @@
basr %r14,%r1
clc SP_R2(4,%r15),BASED(.Lnr_syscalls)
bnl BASED(sysc_tracenogo)
+ l %r8,BASED(.Lsysc_table)
l %r7,SP_R2(%r15) # strace might have changed the
sll %r7,2 # system call
- l %r8,sys_call_table-system_call(%r7,%r13)
+ l %r8,0(%r7,%r8)
sysc_tracego:
lm %r3,%r6,SP_R3(%r15)
l %r2,SP_ORIG_R2(%r15)
@@ -1009,6 +1011,7 @@
.Ltrace: .long syscall_trace
.Lvfork: .long sys_vfork
.Lschedtail: .long schedule_tail
+.Lsysc_table: .long sys_call_table
.Lcritical_start:
.long __critical_start + 0x80000000
@@ -1017,8 +1020,8 @@
.Lcleanup_critical:
.long cleanup_critical
+ .section .rodata, "a"
#define SYSCALL(esa,esame,emu) .long esa
sys_call_table:
#include "syscalls.S"
#undef SYSCALL
-
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index edad607..1ca499f 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -991,6 +991,7 @@
.Lcritical_end:
.quad __critical_end
+ .section .rodata, "a"
#define SYSCALL(esa,esame,emu) .long esame
sys_call_table:
#include "syscalls.S"
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 81dce185..eb6ebfe 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -23,6 +23,7 @@
#include <linux/init.h>
#include <linux/pagemap.h>
#include <linux/bootmem.h>
+#include <linux/pfn.h>
#include <asm/processor.h>
#include <asm/system.h>
@@ -33,6 +34,7 @@
#include <asm/lowcore.h>
#include <asm/tlb.h>
#include <asm/tlbflush.h>
+#include <asm/sections.h>
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -89,17 +91,6 @@
printk("%d pages swap cached\n",cached);
}
-/* References to section boundaries */
-
-extern unsigned long _text;
-extern unsigned long _etext;
-extern unsigned long _edata;
-extern unsigned long __bss_start;
-extern unsigned long _end;
-
-extern unsigned long __init_begin;
-extern unsigned long __init_end;
-
extern unsigned long __initdata zholes_size[];
/*
* paging_init() sets up the page tables
@@ -116,6 +107,10 @@
unsigned long pfn = 0;
unsigned long pgdir_k = (__pa(swapper_pg_dir) & PAGE_MASK) | _KERNSEG_TABLE;
static const int ssm_mask = 0x04000000L;
+ unsigned long ro_start_pfn, ro_end_pfn;
+
+ ro_start_pfn = PFN_DOWN((unsigned long)&__start_rodata);
+ ro_end_pfn = PFN_UP((unsigned long)&__end_rodata);
/* unmap whole virtual address space */
@@ -143,7 +138,10 @@
pg_dir++;
for (tmp = 0 ; tmp < PTRS_PER_PTE ; tmp++,pg_table++) {
- pte = pfn_pte(pfn, PAGE_KERNEL);
+ if (pfn >= ro_start_pfn && pfn < ro_end_pfn)
+ pte = pfn_pte(pfn, __pgprot(_PAGE_RO));
+ else
+ pte = pfn_pte(pfn, PAGE_KERNEL);
if (pfn >= max_low_pfn)
pte_clear(&init_mm, 0, &pte);
set_pte(pg_table, pte);
@@ -175,6 +173,7 @@
}
#else /* CONFIG_64BIT */
+
void __init paging_init(void)
{
pgd_t * pg_dir;
@@ -186,13 +185,15 @@
unsigned long pgdir_k = (__pa(swapper_pg_dir) & PAGE_MASK) |
_KERN_REGION_TABLE;
static const int ssm_mask = 0x04000000L;
-
unsigned long zones_size[MAX_NR_ZONES];
unsigned long dma_pfn, high_pfn;
+ unsigned long ro_start_pfn, ro_end_pfn;
memset(zones_size, 0, sizeof(zones_size));
dma_pfn = MAX_DMA_ADDRESS >> PAGE_SHIFT;
high_pfn = max_low_pfn;
+ ro_start_pfn = PFN_DOWN((unsigned long)&__start_rodata);
+ ro_end_pfn = PFN_UP((unsigned long)&__end_rodata);
if (dma_pfn > high_pfn)
zones_size[ZONE_DMA] = high_pfn;
@@ -231,7 +232,10 @@
pmd_populate_kernel(&init_mm, pm_dir, pt_dir);
for (k = 0 ; k < PTRS_PER_PTE ; k++,pt_dir++) {
- pte = pfn_pte(pfn, PAGE_KERNEL);
+ if (pfn >= ro_start_pfn && pfn < ro_end_pfn)
+ pte = pfn_pte(pfn, __pgprot(_PAGE_RO));
+ else
+ pte = pfn_pte(pfn, PAGE_KERNEL);
if (pfn >= max_low_pfn) {
pte_clear(&init_mm, 0, &pte);
continue;
@@ -282,6 +286,9 @@
reservedpages << (PAGE_SHIFT-10),
datasize >>10,
initsize >> 10);
+ printk("Write protected kernel read-only data: %#lx - %#lx\n",
+ (unsigned long)&__start_rodata,
+ PFN_ALIGN((unsigned long)&__end_rodata) - 1);
}
void free_initmem(void)
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c
index 046b896..f1f7c70 100644
--- a/arch/sh/boards/snapgear/setup.c
+++ b/arch/sh/boards/snapgear/setup.c
@@ -50,7 +50,7 @@
{
printk("SnapGear: EraseConfig init\n");
/* Setup "EraseConfig" switch on external IRQ 0 */
- if (request_irq(IRL0_IRQ, eraseconfig_interrupt, SA_INTERRUPT,
+ if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
"Erase Config", NULL))
printk("SnapGear: failed to register IRQ%d for Reset witch\n",
IRL0_IRQ);
diff --git a/arch/sh/cchips/hd6446x/hd64461/setup.c b/arch/sh/cchips/hd6446x/hd64461/setup.c
index 9b361a9..ad12601 100644
--- a/arch/sh/cchips/hd6446x/hd64461/setup.c
+++ b/arch/sh/cchips/hd6446x/hd64461/setup.c
@@ -133,7 +133,7 @@
return __irq_demux(irq);
}
-static struct irqaction irq0 = { hd64461_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "HD64461", NULL, NULL };
+static struct irqaction irq0 = { hd64461_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "HD64461", NULL, NULL };
int __init setup_hd64461(void)
{
diff --git a/arch/sh/cchips/hd6446x/hd64465/gpio.c b/arch/sh/cchips/hd6446x/hd64465/gpio.c
index 9785fde..72320d0 100644
--- a/arch/sh/cchips/hd6446x/hd64465/gpio.c
+++ b/arch/sh/cchips/hd6446x/hd64465/gpio.c
@@ -170,7 +170,7 @@
if (!request_region(HD64465_REG_GPACR, 0x1000, MODNAME))
return -EBUSY;
if (request_irq(HD64465_IRQ_GPIO, hd64465_gpio_interrupt,
- SA_INTERRUPT, MODNAME, 0))
+ IRQF_DISABLED, MODNAME, 0))
goto out_irqfailed;
printk("HD64465 GPIO layer on irq %d\n", HD64465_IRQ_GPIO);
diff --git a/arch/sh/cchips/hd6446x/hd64465/setup.c b/arch/sh/cchips/hd6446x/hd64465/setup.c
index b2b0aa4..d2b2851 100644
--- a/arch/sh/cchips/hd6446x/hd64465/setup.c
+++ b/arch/sh/cchips/hd6446x/hd64465/setup.c
@@ -153,7 +153,7 @@
return irq;
}
-static struct irqaction irq0 = { hd64465_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "HD64465", NULL, NULL};
+static struct irqaction irq0 = { hd64465_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "HD64465", NULL, NULL};
static int __init setup_hd64465(void)
diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c
index 6a74464..0dc1fb8 100644
--- a/arch/sh/cchips/voyagergx/irq.c
+++ b/arch/sh/cchips/voyagergx/irq.c
@@ -165,7 +165,7 @@
static struct irqaction irq0 = {
.name = "voyagergx",
.handler = voyagergx_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
};
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
index 5afab6f..0f866f8 100644
--- a/arch/sh/drivers/dma/dma-g2.c
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -56,7 +56,7 @@
static struct irqaction g2_dma_irq = {
.name = "g2 DMA handler",
.handler = g2_dma_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
};
static int g2_enable_dma(struct dma_channel *chan)
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index df60497..30a580a 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -70,7 +70,7 @@
static struct irqaction pvr2_dma_irq = {
.name = "pvr2 DMA handler",
.handler = pvr2_dma_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
};
static struct dma_ops pvr2_dma_ops = {
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index fecd8f8..e028a2d 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -90,7 +90,7 @@
chan->chan);
return request_irq(get_dmte_irq(chan->chan), dma_tei,
- SA_INTERRUPT, name, chan);
+ IRQF_DISABLED, name, chan);
}
static void sh_dmac_free_dma(struct dma_channel *chan)
@@ -258,7 +258,7 @@
#ifdef CONFIG_CPU_SH4
make_ipr_irq(DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
- i = request_irq(DMAE_IRQ, dma_err, SA_INTERRUPT, "DMAC Address Error", 0);
+ i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0);
if (i < 0)
return i;
#endif
diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c
index 21f3017..7c81b8b 100644
--- a/arch/sh/drivers/pci/pci-st40.c
+++ b/arch/sh/drivers/pci/pci-st40.c
@@ -447,7 +447,7 @@
PHYSADDR(memory_end) - PHYSADDR(memory_start));
if (request_irq(ST40PCI_ERR_IRQ, st40_pci_irq,
- SA_INTERRUPT, "st40pci", NULL)) {
+ IRQF_DISABLED, "st40pci", NULL)) {
printk(KERN_ERR "st40pci: Cannot hook interrupt\n");
return -EIO;
}
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 96a64cb..d4212ad 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -107,7 +107,7 @@
static struct irqaction tmu_irq = {
.name = "timer",
.handler = tmu_timer_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
};
diff --git a/arch/sh64/kernel/dma.c b/arch/sh64/kernel/dma.c
index 09cd9f4..32c6f05 100644
--- a/arch/sh64/kernel/dma.c
+++ b/arch/sh64/kernel/dma.c
@@ -115,7 +115,7 @@
static struct irqaction irq_dmte = {
.handler = dma_mte,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "DMA MTE",
};
@@ -152,7 +152,7 @@
static struct irqaction irq_derr = {
.handler = dma_err,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "DMA Error",
};
diff --git a/arch/sh64/kernel/pci_sh5.c b/arch/sh64/kernel/pci_sh5.c
index 3c04951..9dae689 100644
--- a/arch/sh64/kernel/pci_sh5.c
+++ b/arch/sh64/kernel/pci_sh5.c
@@ -473,13 +473,13 @@
static int __init pcibios_init(void)
{
if (request_irq(IRQ_ERR, pcish5_err_irq,
- SA_INTERRUPT, "PCI Error",NULL) < 0) {
+ IRQF_DISABLED, "PCI Error",NULL) < 0) {
printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
return -EINVAL;
}
if (request_irq(IRQ_SERR, pcish5_serr_irq,
- SA_INTERRUPT, "PCI SERR interrupt", NULL) < 0) {
+ IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) {
printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
return -EINVAL;
}
diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c
index ba9eb99..b8162e5 100644
--- a/arch/sh64/kernel/time.c
+++ b/arch/sh64/kernel/time.c
@@ -484,8 +484,8 @@
return IRQ_HANDLED;
}
-static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
-static struct irqaction irq1 = { sh64_rtc_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "rtc", NULL, NULL};
+static struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL};
+static struct irqaction irq1 = { sh64_rtc_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "rtc", NULL, NULL};
void __init time_init(void)
{
diff --git a/arch/sh64/mach-cayman/irq.c b/arch/sh64/mach-cayman/irq.c
index cac9421..228ce61 100644
--- a/arch/sh64/mach-cayman/irq.c
+++ b/arch/sh64/mach-cayman/irq.c
@@ -44,13 +44,13 @@
static struct irqaction cayman_action_smsc = {
.name = "Cayman SMSC Mux",
.handler = cayman_interrupt_smsc,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
};
static struct irqaction cayman_action_pci2 = {
.name = "Cayman PCI2 Mux",
.handler = cayman_interrupt_pci2,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
};
static void enable_cayman_irq(unsigned int irq)
diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c
index b81af07..cde7332 100644
--- a/arch/sparc/kernel/irq.c
+++ b/arch/sparc/kernel/irq.c
@@ -191,11 +191,11 @@
}
#endif
seq_printf(p, " %c %s",
- (action->flags & SA_INTERRUPT) ? '+' : ' ',
+ (action->flags & IRQF_DISABLED) ? '+' : ' ',
action->name);
for (action=action->next; action; action = action->next) {
seq_printf(p, ",%s %s",
- (action->flags & SA_INTERRUPT) ? " +" : "",
+ (action->flags & IRQF_DISABLED) ? " +" : "",
action->name);
}
seq_putc(p, '\n');
@@ -243,7 +243,7 @@
printk("Trying to free free shared IRQ%d\n",irq);
goto out_unlock;
}
- } else if (action->flags & SA_SHIRQ) {
+ } else if (action->flags & IRQF_SHARED) {
printk("Trying to free shared IRQ%d with NULL device ID\n", irq);
goto out_unlock;
}
@@ -395,9 +395,9 @@
action = sparc_irq[cpu_irq].action;
if(action) {
- if(action->flags & SA_SHIRQ)
+ if(action->flags & IRQF_SHARED)
panic("Trying to register fast irq when already shared.\n");
- if(irqflags & SA_SHIRQ)
+ if(irqflags & IRQF_SHARED)
panic("Trying to register fast irq as shared.\n");
/* Anyway, someone already owns it so cannot be made fast. */
@@ -497,11 +497,11 @@
actionp = &sparc_irq[cpu_irq].action;
action = *actionp;
if (action) {
- if (!(action->flags & SA_SHIRQ) || !(irqflags & SA_SHIRQ)) {
+ if (!(action->flags & IRQF_SHARED) || !(irqflags & IRQF_SHARED)) {
ret = -EBUSY;
goto out_unlock;
}
- if ((action->flags & SA_INTERRUPT) != (irqflags & SA_INTERRUPT)) {
+ if ((action->flags & IRQF_DISABLED) != (irqflags & IRQF_DISABLED)) {
printk("Attempt to mix fast and slow interrupts on IRQ%d denied\n", irq);
ret = -EBUSY;
goto out_unlock;
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 22422ff..bfd31aa 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -745,7 +745,7 @@
writel (PCI_COUNTER_IRQ_SET(timer_irq, 0),
pcic->pcic_regs+PCI_COUNTER_IRQ);
irq = request_irq(timer_irq, pcic_timer_handler,
- (SA_INTERRUPT | SA_STATIC_ALLOC), "timer", NULL);
+ (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL);
if (irq) {
prom_printf("time_init: unable to attach IRQ%d\n", timer_irq);
prom_halt();
diff --git a/arch/sparc/kernel/sun4c_irq.c b/arch/sparc/kernel/sun4c_irq.c
index 50e988b..4be2c86 100644
--- a/arch/sparc/kernel/sun4c_irq.c
+++ b/arch/sparc/kernel/sun4c_irq.c
@@ -179,7 +179,7 @@
irq = request_irq(TIMER_IRQ,
counter_fn,
- (SA_INTERRUPT | SA_STATIC_ALLOC),
+ (IRQF_DISABLED | SA_STATIC_ALLOC),
"timer", NULL);
if (irq) {
prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ);
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index cbf8ee8..74eed97 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -107,13 +107,13 @@
kstat_cpu(cpu_logical_map(x)).irqs[i]);
#endif
seq_printf(p, "%c %s",
- (action->flags & SA_INTERRUPT) ? '+' : ' ',
+ (action->flags & IRQF_DISABLED) ? '+' : ' ',
action->name);
action = action->next;
for (;;) {
for (; action; action = action->next) {
seq_printf(p, ",%s %s",
- (action->flags & SA_INTERRUPT) ? " +" : "",
+ (action->flags & IRQF_DISABLED) ? " +" : "",
action->name);
}
if (!sbusl) break;
@@ -160,7 +160,7 @@
printk("Trying to free free shared IRQ%d\n",irq);
goto out_unlock;
}
- } else if (action->flags & SA_SHIRQ) {
+ } else if (action->flags & IRQF_SHARED) {
printk("Trying to free shared IRQ%d with NULL device ID\n", irq);
goto out_unlock;
}
@@ -298,13 +298,13 @@
action = *actionp;
if (action) {
- if ((action->flags & SA_SHIRQ) && (irqflags & SA_SHIRQ)) {
+ if ((action->flags & IRQF_SHARED) && (irqflags & IRQF_SHARED)) {
for (tmp = action; tmp->next; tmp = tmp->next);
} else {
ret = -EBUSY;
goto out_unlock;
}
- if ((action->flags & SA_INTERRUPT) ^ (irqflags & SA_INTERRUPT)) {
+ if ((action->flags & IRQF_DISABLED) ^ (irqflags & IRQF_DISABLED)) {
printk("Attempt to mix fast and slow interrupts on IRQ%d denied\n", irq);
ret = -EBUSY;
goto out_unlock;
@@ -490,7 +490,7 @@
irq = request_irq(TIMER_IRQ,
counter_fn,
- (SA_INTERRUPT | SA_STATIC_ALLOC),
+ (IRQF_DISABLED | SA_STATIC_ALLOC),
"timer", NULL);
if (irq) {
prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ);
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
index 38ac672..7cefa30 100644
--- a/arch/sparc/kernel/sun4m_irq.c
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -278,7 +278,7 @@
irq = request_irq(TIMER_IRQ,
counter_fn,
- (SA_INTERRUPT | SA_STATIC_ALLOC),
+ (IRQF_DISABLED | SA_STATIC_ALLOC),
"timer", NULL);
if (irq) {
prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ);
diff --git a/arch/sparc/kernel/tick14.c b/arch/sparc/kernel/tick14.c
index 591547a..d3b4daa 100644
--- a/arch/sparc/kernel/tick14.c
+++ b/arch/sparc/kernel/tick14.c
@@ -74,7 +74,7 @@
if (!request_irq(irq_nr,
handler,
- (SA_INTERRUPT | SA_STATIC_ALLOC),
+ (IRQF_DISABLED | SA_STATIC_ALLOC),
"counter14",
NULL)) {
install_linux_ticker();
diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c
index a1023bb..8a9b470 100644
--- a/arch/sparc64/kernel/ebus.c
+++ b/arch/sparc64/kernel/ebus.c
@@ -140,7 +140,7 @@
if (on) {
if (p->flags & EBUS_DMA_FLAG_USE_EBDMA_HANDLER) {
- if (request_irq(p->irq, ebus_dma_irq, SA_SHIRQ, p->name, p))
+ if (request_irq(p->irq, ebus_dma_irq, IRQF_SHARED, p->name, p))
return -EBUSY;
}
diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c
index bf7b32b..197a7ff 100644
--- a/arch/sparc64/kernel/pci_psycho.c
+++ b/arch/sparc64/kernel/pci_psycho.c
@@ -863,11 +863,11 @@
if (op->num_irqs < 6)
return;
- request_irq(op->irqs[1], psycho_ue_intr, SA_SHIRQ, "PSYCHO UE", p);
- request_irq(op->irqs[2], psycho_ce_intr, SA_SHIRQ, "PSYCHO CE", p);
- request_irq(op->irqs[5], psycho_pcierr_intr, SA_SHIRQ,
+ request_irq(op->irqs[1], psycho_ue_intr, IRQF_SHARED, "PSYCHO UE", p);
+ request_irq(op->irqs[2], psycho_ce_intr, IRQF_SHARED, "PSYCHO CE", p);
+ request_irq(op->irqs[5], psycho_pcierr_intr, IRQF_SHARED,
"PSYCHO PCIERR-A", &p->pbm_A);
- request_irq(op->irqs[0], psycho_pcierr_intr, SA_SHIRQ,
+ request_irq(op->irqs[0], psycho_pcierr_intr, IRQF_SHARED,
"PSYCHO PCIERR-B", &p->pbm_B);
/* Enable UE and CE interrupts for controller. */
diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c
index 5e087b0..4589185 100644
--- a/arch/sparc64/kernel/pci_sabre.c
+++ b/arch/sparc64/kernel/pci_sabre.c
@@ -854,14 +854,14 @@
SABRE_UEAFSR_SDRD | SABRE_UEAFSR_SDWR |
SABRE_UEAFSR_SDTE | SABRE_UEAFSR_PDTE));
- request_irq(op->irqs[1], sabre_ue_intr, SA_SHIRQ, "SABRE UE", p);
+ request_irq(op->irqs[1], sabre_ue_intr, IRQF_SHARED, "SABRE UE", p);
sabre_write(base + SABRE_CE_AFSR,
(SABRE_CEAFSR_PDRD | SABRE_CEAFSR_PDWR |
SABRE_CEAFSR_SDRD | SABRE_CEAFSR_SDWR));
- request_irq(op->irqs[2], sabre_ce_intr, SA_SHIRQ, "SABRE CE", p);
- request_irq(op->irqs[0], sabre_pcierr_intr, SA_SHIRQ,
+ request_irq(op->irqs[2], sabre_ce_intr, IRQF_SHARED, "SABRE CE", p);
+ request_irq(op->irqs[0], sabre_pcierr_intr, IRQF_SHARED,
"SABRE PCIERR", p);
tmp = sabre_read(base + SABRE_PCICTRL);
diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c
index 5c6e2a9..75ade83 100644
--- a/arch/sparc64/kernel/pci_schizo.c
+++ b/arch/sparc64/kernel/pci_schizo.c
@@ -998,32 +998,32 @@
pbm = pbm_for_ino(p, SCHIZO_UE_INO);
op = of_find_device_by_node(pbm->prom_node);
if (op)
- request_irq(op->irqs[1], schizo_ue_intr, SA_SHIRQ,
+ request_irq(op->irqs[1], schizo_ue_intr, IRQF_SHARED,
"TOMATILLO_UE", p);
pbm = pbm_for_ino(p, SCHIZO_CE_INO);
op = of_find_device_by_node(pbm->prom_node);
if (op)
- request_irq(op->irqs[2], schizo_ce_intr, SA_SHIRQ,
+ request_irq(op->irqs[2], schizo_ce_intr, IRQF_SHARED,
"TOMATILLO CE", p);
pbm = pbm_for_ino(p, SCHIZO_PCIERR_A_INO);
op = of_find_device_by_node(pbm->prom_node);
if (op)
- request_irq(op->irqs[0], schizo_pcierr_intr, SA_SHIRQ,
+ request_irq(op->irqs[0], schizo_pcierr_intr, IRQF_SHARED,
"TOMATILLO PCIERR-A", pbm);
pbm = pbm_for_ino(p, SCHIZO_PCIERR_B_INO);
op = of_find_device_by_node(pbm->prom_node);
if (op)
- request_irq(op->irqs[0], schizo_pcierr_intr, SA_SHIRQ,
+ request_irq(op->irqs[0], schizo_pcierr_intr, IRQF_SHARED,
"TOMATILLO PCIERR-B", pbm);
pbm = pbm_for_ino(p, SCHIZO_SERR_INO);
op = of_find_device_by_node(pbm->prom_node);
if (op)
- request_irq(op->irqs[3], schizo_safarierr_intr, SA_SHIRQ,
+ request_irq(op->irqs[3], schizo_safarierr_intr, IRQF_SHARED,
"TOMATILLO SERR", p);
/* Enable UE and CE interrupts for controller. */
@@ -1106,32 +1106,32 @@
pbm = pbm_for_ino(p, SCHIZO_UE_INO);
op = of_find_device_by_node(pbm->prom_node);
if (op)
- request_irq(op->irqs[1], schizo_ue_intr, SA_SHIRQ,
+ request_irq(op->irqs[1], schizo_ue_intr, IRQF_SHARED,
"SCHIZO_UE", p);
pbm = pbm_for_ino(p, SCHIZO_CE_INO);
op = of_find_device_by_node(pbm->prom_node);
if (op)
- request_irq(op->irqs[2], schizo_ce_intr, SA_SHIRQ,
+ request_irq(op->irqs[2], schizo_ce_intr, IRQF_SHARED,
"SCHIZO CE", p);
pbm = pbm_for_ino(p, SCHIZO_PCIERR_A_INO);
op = of_find_device_by_node(pbm->prom_node);
if (op)
- request_irq(op->irqs[0], schizo_pcierr_intr, SA_SHIRQ,
+ request_irq(op->irqs[0], schizo_pcierr_intr, IRQF_SHARED,
"SCHIZO PCIERR-A", pbm);
pbm = pbm_for_ino(p, SCHIZO_PCIERR_B_INO);
op = of_find_device_by_node(pbm->prom_node);
if (op)
- request_irq(op->irqs[0], schizo_pcierr_intr, SA_SHIRQ,
+ request_irq(op->irqs[0], schizo_pcierr_intr, IRQF_SHARED,
"SCHIZO PCIERR-B", pbm);
pbm = pbm_for_ino(p, SCHIZO_SERR_INO);
op = of_find_device_by_node(pbm->prom_node);
if (op)
- request_irq(op->irqs[3], schizo_safarierr_intr, SA_SHIRQ,
+ request_irq(op->irqs[3], schizo_safarierr_intr, IRQF_SHARED,
"SCHIZO SERR", p);
/* Enable UE and CE interrupts for controller. */
diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c
index ef68aa4..c49a577 100644
--- a/arch/sparc64/kernel/sbus.c
+++ b/arch/sparc64/kernel/sbus.c
@@ -1065,7 +1065,7 @@
irq = sbus_build_irq(sbus, SYSIO_UE_INO);
if (request_irq(irq, sysio_ue_handler,
- SA_SHIRQ, "SYSIO UE", sbus) < 0) {
+ IRQF_SHARED, "SYSIO UE", sbus) < 0) {
prom_printf("SYSIO[%x]: Cannot register UE interrupt.\n",
sbus->portid);
prom_halt();
@@ -1073,7 +1073,7 @@
irq = sbus_build_irq(sbus, SYSIO_CE_INO);
if (request_irq(irq, sysio_ce_handler,
- SA_SHIRQ, "SYSIO CE", sbus) < 0) {
+ IRQF_SHARED, "SYSIO CE", sbus) < 0) {
prom_printf("SYSIO[%x]: Cannot register CE interrupt.\n",
sbus->portid);
prom_halt();
@@ -1081,7 +1081,7 @@
irq = sbus_build_irq(sbus, SYSIO_SBUSERR_INO);
if (request_irq(irq, sysio_sbus_error_handler,
- SA_SHIRQ, "SYSIO SBUS Error", sbus) < 0) {
+ IRQF_SHARED, "SYSIO SBUS Error", sbus) < 0) {
prom_printf("SYSIO[%x]: Cannot register SBUS Error interrupt.\n",
sbus->portid);
prom_halt();
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 5ca57ca..ebebaab 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -373,7 +373,7 @@
int err;
/* Interrupts are enabled here because we registered the interrupt with
- * SA_INTERRUPT (see line_setup_irq).*/
+ * IRQF_DISABLED (see line_setup_irq).*/
spin_lock_irq(&line->lock);
err = flush_buffer(line);
@@ -406,7 +406,7 @@
int line_setup_irq(int fd, int input, int output, struct line *line, void *data)
{
struct line_driver *driver = line->driver;
- int err = 0, flags = SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM;
+ int err = 0, flags = IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM;
if (input)
err = um_request_irq(driver->read_irq, fd, IRQ_READ,
@@ -767,7 +767,7 @@
spin_unlock(&winch_handler_lock);
if(um_request_irq(WINCH_IRQ, fd, IRQ_READ, winch_interrupt,
- SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM,
+ IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM,
"winch", winch) < 0)
printk("register_winch_irq - failed to register IRQ\n");
}
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 7914931..b414522 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -777,7 +777,7 @@
register_reboot_notifier(&reboot_notifier);
err = um_request_irq(MCONSOLE_IRQ, sock, IRQ_READ, mconsole_interrupt,
- SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM,
+ IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM,
"mconsole", (void *)sock);
if (err){
printk("Failed to get IRQ for management console\n");
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 8c7279b..501f956 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -128,7 +128,7 @@
}
err = um_request_irq(dev->irq, lp->fd, IRQ_READ, uml_net_interrupt,
- SA_INTERRUPT | SA_SHIRQ, dev->name, dev);
+ IRQF_DISABLED | IRQF_SHARED, dev->name, dev);
if(err != 0){
printk(KERN_ERR "uml_net_open: failed to get irq(%d)\n", err);
err = -ENETUNREACH;
diff --git a/arch/um/drivers/port_kern.c b/arch/um/drivers/port_kern.c
index 189839e..73755f3 100644
--- a/arch/um/drivers/port_kern.c
+++ b/arch/um/drivers/port_kern.c
@@ -105,7 +105,7 @@
.port = port });
if(um_request_irq(TELNETD_IRQ, socket[0], IRQ_READ, pipe_interrupt,
- SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM,
+ IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM,
"telnetd", conn)){
printk(KERN_ERR "port_accept : failed to get IRQ for "
"telnetd\n");
@@ -186,7 +186,7 @@
goto out_free;
}
if(um_request_irq(ACCEPT_IRQ, fd, IRQ_READ, port_interrupt,
- SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM, "port",
+ IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM, "port",
port)){
printk(KERN_ERR "Failed to get IRQ for port %d\n", port_num);
goto out_close;
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 0345e25..602d728 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -874,7 +874,7 @@
return(0);
}
err = um_request_irq(UBD_IRQ, thread_fd, IRQ_READ, ubd_intr,
- SA_INTERRUPT, "ubd", ubd_dev);
+ IRQF_DISABLED, "ubd", ubd_dev);
if(err != 0)
printk(KERN_ERR "um_request_irq failed - errno = %d\n", -err);
return 0;
diff --git a/arch/um/drivers/xterm_kern.c b/arch/um/drivers/xterm_kern.c
index d269a80..6036ec8 100644
--- a/arch/um/drivers/xterm_kern.c
+++ b/arch/um/drivers/xterm_kern.c
@@ -54,7 +54,7 @@
init_completion(&data->ready);
err = um_request_irq(XTERM_IRQ, socket, IRQ_READ, xterm_interrupt,
- SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM,
+ IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM,
"xterm", data);
if (err){
printk(KERN_ERR "xterm_fd : failed to get IRQ for xterm, "
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index fae43a3..bfd0bdc 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -474,7 +474,7 @@
}
err = um_request_irq(irq, fds[0], IRQ_READ, handler,
- SA_INTERRUPT | SA_SAMPLE_RANDOM, name,
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM, name,
(void *) (long) fds[0]);
if (err) {
printk("init_aio_irq - : um_request_irq failed, err = %d\n",
diff --git a/arch/um/kernel/sigio_kern.c b/arch/um/kernel/sigio_kern.c
index 1c1300f..51b6770 100644
--- a/arch/um/kernel/sigio_kern.c
+++ b/arch/um/kernel/sigio_kern.c
@@ -31,7 +31,7 @@
int err;
err = um_request_irq(SIGIO_WRITE_IRQ, fd, IRQ_READ, sigio_interrupt,
- SA_INTERRUPT | SA_SAMPLE_RANDOM, "write sigio",
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "write sigio",
NULL);
if(err){
printk("write_sigio_irq : um_request_irq failed, err = %d\n",
diff --git a/arch/um/kernel/skas/uaccess.c b/arch/um/kernel/skas/uaccess.c
index 5992c32..8912cec 100644
--- a/arch/um/kernel/skas/uaccess.c
+++ b/arch/um/kernel/skas/uaccess.c
@@ -8,6 +8,7 @@
#include "linux/kernel.h"
#include "linux/string.h"
#include "linux/fs.h"
+#include "linux/hardirq.h"
#include "linux/highmem.h"
#include "asm/page.h"
#include "asm/pgtable.h"
@@ -38,7 +39,7 @@
return((unsigned long) phys);
}
-static int do_op(unsigned long addr, int len, int is_write,
+static int do_op_one_page(unsigned long addr, int len, int is_write,
int (*op)(unsigned long addr, int len, void *arg), void *arg)
{
struct page *page;
@@ -49,9 +50,11 @@
return(-1);
page = phys_to_page(addr);
- addr = (unsigned long) kmap(page) + (addr & ~PAGE_MASK);
+ addr = (unsigned long) kmap_atomic(page, KM_UML_USERCOPY) + (addr & ~PAGE_MASK);
+
n = (*op)(addr, len, arg);
- kunmap(page);
+
+ kunmap_atomic(page, KM_UML_USERCOPY);
return(n);
}
@@ -77,7 +80,7 @@
remain = len;
current->thread.fault_catcher = jmpbuf;
- n = do_op(addr, size, is_write, op, arg);
+ n = do_op_one_page(addr, size, is_write, op, arg);
if(n != 0){
*res = (n < 0 ? remain : 0);
goto out;
@@ -91,7 +94,7 @@
}
while(addr < ((addr + remain) & PAGE_MASK)){
- n = do_op(addr, PAGE_SIZE, is_write, op, arg);
+ n = do_op_one_page(addr, PAGE_SIZE, is_write, op, arg);
if(n != 0){
*res = (n < 0 ? remain : 0);
goto out;
@@ -105,7 +108,7 @@
goto out;
}
- n = do_op(addr, remain, is_write, op, arg);
+ n = do_op_one_page(addr, remain, is_write, op, arg);
if(n != 0)
*res = (n < 0 ? remain : 0);
else *res = 0;
diff --git a/arch/um/kernel/time_kern.c b/arch/um/kernel/time_kern.c
index 820fa36..d7e044b 100644
--- a/arch/um/kernel/time_kern.c
+++ b/arch/um/kernel/time_kern.c
@@ -195,7 +195,7 @@
int err;
user_time_init();
- err = request_irq(TIMER_IRQ, um_timer, SA_INTERRUPT, "timer", NULL);
+ err = request_irq(TIMER_IRQ, um_timer, IRQF_DISABLED, "timer", NULL);
if(err != 0)
printk(KERN_ERR "timer_init : request_irq failed - "
"errno = %d\n", -err);
diff --git a/arch/um/os-Linux/umid.c b/arch/um/os-Linux/umid.c
index 362db05..48092b9 100644
--- a/arch/um/os-Linux/umid.c
+++ b/arch/um/os-Linux/umid.c
@@ -67,32 +67,53 @@
return err;
}
-static int actually_do_remove(char *dir)
+/*
+ * Unlinks the files contained in @dir and then removes @dir.
+ * Doesn't handle directory trees, so it's not like rm -rf, but almost such. We
+ * ignore ENOENT errors for anything (they happen, strangely enough - possibly due
+ * to races between multiple dying UML threads).
+ */
+static int remove_files_and_dir(char *dir)
{
DIR *directory;
struct dirent *ent;
int len;
char file[256];
+ int ret;
directory = opendir(dir);
- if(directory == NULL)
- return -errno;
+ if (directory == NULL) {
+ if (errno != ENOENT)
+ return -errno;
+ else
+ return 0;
+ }
- while((ent = readdir(directory)) != NULL){
- if(!strcmp(ent->d_name, ".") || !strcmp(ent->d_name, ".."))
+ while ((ent = readdir(directory)) != NULL) {
+ if (!strcmp(ent->d_name, ".") || !strcmp(ent->d_name, ".."))
continue;
len = strlen(dir) + sizeof("/") + strlen(ent->d_name) + 1;
- if(len > sizeof(file))
- return -E2BIG;
+ if (len > sizeof(file)) {
+ ret = -E2BIG;
+ goto out;
+ }
sprintf(file, "%s/%s", dir, ent->d_name);
- if(unlink(file) < 0)
- return -errno;
+ if (unlink(file) < 0 && errno != ENOENT) {
+ ret = -errno;
+ goto out;
+ }
}
- if(rmdir(dir) < 0)
- return -errno;
- return 0;
+ if (rmdir(dir) < 0 && errno != ENOENT) {
+ ret = -errno;
+ goto out;
+ }
+
+ ret = 0;
+out:
+ closedir(directory);
+ return ret;
}
/* This says that there isn't already a user of the specified directory even if
@@ -103,9 +124,10 @@
* something other than UML sticking stuff in the directory
* this boot racing with a shutdown of the other UML
* In any of these cases, the directory isn't useful for anything else.
+ *
+ * Boolean return: 1 if in use, 0 otherwise.
*/
-
-static int not_dead_yet(char *dir)
+static inline int is_umdir_used(char *dir)
{
char file[strlen(uml_dir) + UMID_LEN + sizeof("/pid\0")];
char pid[sizeof("nnnnn\0")], *end;
@@ -113,7 +135,7 @@
n = snprintf(file, sizeof(file), "%s/pid", dir);
if(n >= sizeof(file)){
- printk("not_dead_yet - pid filename too long\n");
+ printk("is_umdir_used - pid filename too long\n");
err = -E2BIG;
goto out;
}
@@ -123,7 +145,7 @@
if(fd < 0) {
fd = -errno;
if(fd != -ENOENT){
- printk("not_dead_yet : couldn't open pid file '%s', "
+ printk("is_umdir_used : couldn't open pid file '%s', "
"err = %d\n", file, -fd);
}
goto out;
@@ -132,18 +154,18 @@
err = 0;
n = read(fd, pid, sizeof(pid));
if(n < 0){
- printk("not_dead_yet : couldn't read pid file '%s', "
+ printk("is_umdir_used : couldn't read pid file '%s', "
"err = %d\n", file, errno);
goto out_close;
} else if(n == 0){
- printk("not_dead_yet : couldn't read pid file '%s', "
+ printk("is_umdir_used : couldn't read pid file '%s', "
"0-byte read\n", file);
goto out_close;
}
p = strtoul(pid, &end, 0);
if(end == pid){
- printk("not_dead_yet : couldn't parse pid file '%s', "
+ printk("is_umdir_used : couldn't parse pid file '%s', "
"errno = %d\n", file, errno);
goto out_close;
}
@@ -153,19 +175,32 @@
return 1;
}
- err = actually_do_remove(dir);
- if(err)
- printk("not_dead_yet - actually_do_remove failed with "
- "err = %d\n", err);
-
- return err;
-
out_close:
close(fd);
out:
return 0;
}
+/*
+ * Try to remove the directory @dir unless it's in use.
+ * Precondition: @dir exists.
+ * Returns 0 for success, < 0 for failure in removal or if the directory is in
+ * use.
+ */
+static int umdir_take_if_dead(char *dir)
+{
+ int ret;
+ if (is_umdir_used(dir))
+ return -EEXIST;
+
+ ret = remove_files_and_dir(dir);
+ if (ret) {
+ printk("is_umdir_used - remove_files_and_dir failed with "
+ "err = %d\n", ret);
+ }
+ return ret;
+}
+
static void __init create_pid_file(void)
{
char file[strlen(uml_dir) + UMID_LEN + sizeof("/pid\0")];
@@ -244,11 +279,7 @@
if(err != -EEXIST)
goto err;
- /* 1 -> this umid is already in use
- * < 0 -> we couldn't remove the umid directory
- * In either case, we can't use this umid, so return -EEXIST.
- */
- if(not_dead_yet(tmp) != 0)
+ if (umdir_take_if_dead(tmp) < 0)
goto err;
err = mkdir(tmp, 0777);
@@ -344,9 +375,9 @@
char dir[strlen(uml_dir) + UMID_LEN + 1], err;
sprintf(dir, "%s%s", uml_dir, umid);
- err = actually_do_remove(dir);
+ err = remove_files_and_dir(dir);
if(err)
- printf("remove_umid_dir - actually_do_remove failed with "
+ printf("remove_umid_dir - remove_files_and_dir failed with "
"err = %d\n", err);
}
diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules
index 1347dc6..813077f 100644
--- a/arch/um/scripts/Makefile.rules
+++ b/arch/um/scripts/Makefile.rules
@@ -8,7 +8,7 @@
USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
$(USER_OBJS:.o=.%): \
- c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) $(CFLAGS_$(*F).o)
+ c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) $(CFLAGS_$(basetarget).o)
$(USER_OBJS) : CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ \
-Dunix -D__unix__ -D__$(SUBARCH)__
@@ -17,7 +17,7 @@
UNPROFILE_OBJS := $(foreach file,$(UNPROFILE_OBJS),$(obj)/$(file))
$(UNPROFILE_OBJS:.o=.%): \
- c_flags = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS)) $(CFLAGS_$(*F).o)
+ c_flags = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS)) $(CFLAGS_$(basetarget).o)
$(UNPROFILE_OBJS) : CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ \
-Dunix -D__unix__ -D__$(SUBARCH)__
diff --git a/arch/v850/kernel/gbus_int.c b/arch/v850/kernel/gbus_int.c
index 92918b8..25d636e 100644
--- a/arch/v850/kernel/gbus_int.c
+++ b/arch/v850/kernel/gbus_int.c
@@ -154,7 +154,7 @@
/* First enable the CPU interrupt. */
int rval =
request_irq (IRQ_GINT(gint), gbus_int_handle_irq,
- SA_INTERRUPT,
+ IRQF_DISABLED,
"gbus_int_handler",
&gint_num_active_irqs[gint]);
if (rval != 0)
diff --git a/arch/v850/kernel/rte_me2_cb.c b/arch/v850/kernel/rte_me2_cb.c
index df7027d..3be355a 100644
--- a/arch/v850/kernel/rte_me2_cb.c
+++ b/arch/v850/kernel/rte_me2_cb.c
@@ -263,7 +263,7 @@
if (cb_pic_active_irqs == 0) {
rval = request_irq (IRQ_CB_PIC, cb_pic_handle_irq,
- SA_INTERRUPT, "cb_pic_handler", 0);
+ IRQF_DISABLED, "cb_pic_handler", 0);
if (rval != 0)
return rval;
}
diff --git a/arch/v850/kernel/time.c b/arch/v850/kernel/time.c
index c1e85c2..a0b4669 100644
--- a/arch/v850/kernel/time.c
+++ b/arch/v850/kernel/time.c
@@ -177,7 +177,7 @@
static int timer_dev_id;
static struct irqaction timer_irqaction = {
timer_interrupt,
- SA_INTERRUPT,
+ IRQF_DISABLED,
CPU_MASK_NONE,
"timer",
&timer_dev_id,
diff --git a/arch/x86_64/ia32/Makefile b/arch/x86_64/ia32/Makefile
index e9263b4..62bc5f5 100644
--- a/arch/x86_64/ia32/Makefile
+++ b/arch/x86_64/ia32/Makefile
@@ -11,6 +11,9 @@
obj-$(CONFIG_IA32_AOUT) += ia32_aout.o
+audit-class-$(CONFIG_AUDIT) := audit.o
+obj-$(CONFIG_IA32_EMULATION) += $(audit-class-y)
+
$(obj)/syscall32_syscall.o: \
$(foreach F,sysenter syscall,$(obj)/vsyscall-$F.so)
diff --git a/arch/x86_64/ia32/audit.c b/arch/x86_64/ia32/audit.c
new file mode 100644
index 0000000..ab94f2e
--- /dev/null
+++ b/arch/x86_64/ia32/audit.c
@@ -0,0 +1,11 @@
+#include <asm-i386/unistd.h>
+
+unsigned ia32_dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+unsigned ia32_chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
index aeb9c56..819e84e 100644
--- a/arch/x86_64/kernel/Makefile
+++ b/arch/x86_64/kernel/Makefile
@@ -35,6 +35,7 @@
obj-$(CONFIG_X86_PM_TIMER) += pmtimer.o
obj-$(CONFIG_X86_VSMP) += vsmp.o
obj-$(CONFIG_K8_NB) += k8.o
+obj-$(CONFIG_AUDIT) += audit.o
obj-$(CONFIG_MODULES) += module.o
diff --git a/arch/x86_64/kernel/audit.c b/arch/x86_64/kernel/audit.c
new file mode 100644
index 0000000..a067aa4
--- /dev/null
+++ b/arch/x86_64/kernel/audit.c
@@ -0,0 +1,29 @@
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/audit.h>
+#include <asm/unistd.h>
+
+static unsigned dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+static unsigned chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+static int __init audit_classes_init(void)
+{
+#ifdef CONFIG_IA32_EMULATION
+ extern __u32 ia32_dir_class[];
+ extern __u32 ia32_chattr_class[];
+ audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class);
+ audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class);
+#endif
+ audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
+ audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+ return 0;
+}
+
+__initcall(audit_classes_init);
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index ebbee6f..b9ff759 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -889,7 +889,7 @@
}
static struct irqaction irq0 = {
- timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL
+ timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL
};
void __init time_init(void)
diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c
index 72f140f..d14fb2d 100644
--- a/arch/x86_64/mm/init.c
+++ b/arch/x86_64/mm/init.c
@@ -678,16 +678,15 @@
#ifdef CONFIG_DEBUG_RODATA
-extern char __start_rodata, __end_rodata;
void mark_rodata_ro(void)
{
- unsigned long addr = (unsigned long)&__start_rodata;
+ unsigned long addr = (unsigned long)__start_rodata;
- for (; addr < (unsigned long)&__end_rodata; addr += PAGE_SIZE)
+ for (; addr < (unsigned long)__end_rodata; addr += PAGE_SIZE)
change_page_attr_addr(addr, 1, PAGE_KERNEL_RO);
printk ("Write protecting the kernel read-only data: %luk\n",
- (&__end_rodata - &__start_rodata) >> 10);
+ (__end_rodata - __start_rodata) >> 10);
/*
* change_page_attr_addr() requires a global_flush_tlb() call after it.
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index 4a2c365..412ab32 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -52,7 +52,7 @@
static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static struct irqaction timer_irqaction = {
.handler = timer_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.name = "timer",
};
diff --git a/drivers/acorn/block/mfmhd.c b/drivers/acorn/block/mfmhd.c
index d9c9a35..3dd6b7b 100644
--- a/drivers/acorn/block/mfmhd.c
+++ b/drivers/acorn/block/mfmhd.c
@@ -1278,7 +1278,7 @@
printk("mfm: detected %d hard drive%s\n", mfm_drives,
mfm_drives == 1 ? "" : "s");
- ret = request_irq(mfm_irq, mfm_interrupt_handler, SA_INTERRUPT, "MFM harddisk", NULL);
+ ret = request_irq(mfm_irq, mfm_interrupt_handler, IRQF_DISABLED, "MFM harddisk", NULL);
if (ret) {
printk("mfm: unable to get IRQ%d\n", mfm_irq);
goto out4;
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index dec044c..ea5a049 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -192,7 +192,7 @@
/* Make sure this is a valid target state */
if (!device->flags.power_manageable) {
- printk(KERN_DEBUG "Device `[%s]is not power manageable",
+ printk(KERN_DEBUG "Device `[%s]' is not power manageable",
device->kobj.name);
return -ENODEV;
}
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 5dd2ed1..5a468e2 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -280,7 +280,7 @@
acpi_irq_handler = handler;
acpi_irq_context = context;
- if (request_irq(irq, acpi_irq, SA_SHIRQ, "acpi", acpi_irq)) {
+ if (request_irq(irq, acpi_irq, IRQF_SHARED, "acpi", acpi_irq)) {
printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq);
return AE_NOT_ACQUIRED;
}
diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c
index 4048681..d3b4263 100644
--- a/drivers/atm/ambassador.c
+++ b/drivers/atm/ambassador.c
@@ -2286,7 +2286,7 @@
setup_pci_dev(pci_dev);
// grab (but share) IRQ and install handler
- err = request_irq(irq, interrupt_handler, SA_SHIRQ, DEV_LABEL, dev);
+ err = request_irq(irq, interrupt_handler, IRQF_SHARED, DEV_LABEL, dev);
if (err < 0) {
PRINTK (KERN_ERR, "request IRQ failed!");
goto out_reset;
diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index 976ced1..df359a6 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -1797,7 +1797,7 @@
DPRINTK(">eni_start\n");
eni_dev = ENI_DEV(dev);
- if (request_irq(eni_dev->irq,&eni_int,SA_SHIRQ,DEV_LABEL,dev)) {
+ if (request_irq(eni_dev->irq,&eni_int,IRQF_SHARED,DEV_LABEL,dev)) {
printk(KERN_ERR DEV_LABEL "(itf %d): IRQ%d is already in use\n",
dev->number,eni_dev->irq);
error = -EAGAIN;
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index d40605c..38fc054 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -1829,7 +1829,7 @@
init_q (dev, &dev->rx_rq[i], RXB_RQ(i), RXRQ_NENTRIES, 1);
dev->irq = pci_dev->irq;
- if (request_irq (dev->irq, fs_irq, SA_SHIRQ, "firestream", dev)) {
+ if (request_irq (dev->irq, fs_irq, IRQF_SHARED, "firestream", dev)) {
printk (KERN_WARNING "couldn't get irq %d for firestream.\n", pci_dev->irq);
/* XXX undo all previous stuff... */
return 1;
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index 9be9a40..9862213 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -2123,7 +2123,7 @@
static int __devinit
fore200e_irq_request(struct fore200e* fore200e)
{
- if (request_irq(fore200e->irq, fore200e_interrupt, SA_SHIRQ, fore200e->name, fore200e->atm_dev) < 0) {
+ if (request_irq(fore200e->irq, fore200e_interrupt, IRQF_SHARED, fore200e->name, fore200e->atm_dev) < 0) {
printk(FORE200E "unable to reserve IRQ %s for device %s\n",
fore200e_irq_itoa(fore200e->irq), fore200e->name);
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index a5cbd3d..d369130 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -1007,7 +1007,7 @@
he_writel(he_dev, 0x0, GRP_54_MAP);
he_writel(he_dev, 0x0, GRP_76_MAP);
- if (request_irq(he_dev->pci_dev->irq, he_irq_handler, SA_INTERRUPT|SA_SHIRQ, DEV_LABEL, he_dev)) {
+ if (request_irq(he_dev->pci_dev->irq, he_irq_handler, IRQF_DISABLED|IRQF_SHARED, DEV_LABEL, he_dev)) {
hprintk("irq %d already in use\n", he_dev->pci_dev->irq);
return -EINVAL;
}
diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c
index 821c81e..d1113e8 100644
--- a/drivers/atm/horizon.c
+++ b/drivers/atm/horizon.c
@@ -2735,7 +2735,7 @@
irq = pci_dev->irq;
if (request_irq(irq,
interrupt_handler,
- SA_SHIRQ, /* irqflags guess */
+ IRQF_SHARED, /* irqflags guess */
DEV_LABEL, /* name guess */
dev)) {
PRINTD(DBG_WARN, "request IRQ failed!");
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index 8fdb301..5d1c6c9 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -3386,7 +3386,7 @@
writel(SAR_STAT_TMROF, SAR_REG_STAT);
}
IPRINTK("%s: Request IRQ ... ", card->name);
- if (request_irq(pcidev->irq, idt77252_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pcidev->irq, idt77252_interrupt, IRQF_DISABLED|IRQF_SHARED,
card->name, card) != 0) {
printk("%s: can't allocate IRQ.\n", card->name);
deinit_card(card);
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 333a7bc..f20b0b2 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -2488,7 +2488,7 @@
u32 ctrl_reg;
IF_EVENT(printk(">ia_start\n");)
iadev = INPH_IA_DEV(dev);
- if (request_irq(iadev->irq, &ia_int, SA_SHIRQ, DEV_LABEL, dev)) {
+ if (request_irq(iadev->irq, &ia_int, IRQF_SHARED, DEV_LABEL, dev)) {
printk(KERN_ERR DEV_LABEL "(itf %d): IRQ%d is already in use\n",
dev->number, iadev->irq);
error = -EAGAIN;
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index cac09e3..fe60a59 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -2240,7 +2240,7 @@
conf2_write(lanai);
reg_write(lanai, TX_FIFO_DEPTH, TxDepth_Reg);
reg_write(lanai, 0, CBR_ICG_Reg); /* CBR defaults to no limit */
- if ((result = request_irq(lanai->pci->irq, lanai_int, SA_SHIRQ,
+ if ((result = request_irq(lanai->pci->irq, lanai_int, IRQF_SHARED,
DEV_LABEL, lanai)) != 0) {
printk(KERN_ERR DEV_LABEL ": can't allocate interrupt\n");
goto error_vcctable;
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index b78612d..b803689 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -625,7 +625,7 @@
if (mac[i] == NULL)
nicstar_init_eprom(card->membase);
- if (request_irq(pcidev->irq, &ns_irq_handler, SA_INTERRUPT | SA_SHIRQ, "nicstar", card) != 0)
+ if (request_irq(pcidev->irq, &ns_irq_handler, IRQF_DISABLED | IRQF_SHARED, "nicstar", card) != 0)
{
printk("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq);
error = 9;
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index 1699c93..2c65e82 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -1270,7 +1270,7 @@
zatm_dev->rx_map = zatm_dev->tx_map = NULL;
for (i = 0; i < NR_MBX; i++)
zatm_dev->mbx_start[i] = 0;
- error = request_irq(zatm_dev->irq, zatm_int, SA_SHIRQ, DEV_LABEL, dev);
+ error = request_irq(zatm_dev->irq, zatm_int, IRQF_SHARED, DEV_LABEL, dev);
if (error < 0) {
printk(KERN_ERR DEV_LABEL "(itf %d): IRQ%d is already in use\n",
dev->number,zatm_dev->irq);
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 50ca1aa..4cd23c3 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -3014,7 +3014,7 @@
Acquire shared access to the IRQ Channel.
*/
IRQ_Channel = PCI_Device->irq;
- if (request_irq(IRQ_Channel, InterruptHandler, SA_SHIRQ,
+ if (request_irq(IRQ_Channel, InterruptHandler, IRQF_SHARED,
Controller->FullModelName, Controller) < 0)
{
DAC960_Error("Unable to acquire IRQ Channel %d for Controller at\n",
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 05fb083..1c4df22 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3159,7 +3159,7 @@
/* make sure the board interrupts are off */
hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_OFF);
if (request_irq(hba[i]->intr[SIMPLE_MODE_INT], do_cciss_intr,
- SA_INTERRUPT | SA_SHIRQ, hba[i]->devname, hba[i])) {
+ IRQF_DISABLED | IRQF_SHARED, hba[i]->devname, hba[i])) {
printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
hba[i]->intr[SIMPLE_MODE_INT], hba[i]->devname);
goto clean2;
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index bfd245d..757f42d 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -408,7 +408,7 @@
}
hba[i]->access.set_intr_mask(hba[i], 0);
if (request_irq(hba[i]->intr, do_ida_intr,
- SA_INTERRUPT|SA_SHIRQ, hba[i]->devname, hba[i]))
+ IRQF_DISABLED|IRQF_SHARED, hba[i]->devname, hba[i]))
{
printk(KERN_ERR "cpqarray: Unable to get irq %d for %s\n",
hba[i]->intr, hba[i]->devname);
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 39662f0..0a1b1ea 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -50,9 +50,9 @@
#define DBG_RX 0x0200
#define DBG_TX 0x0400
static unsigned int debugflags;
-static unsigned int nbds_max = 16;
#endif /* NDEBUG */
+static unsigned int nbds_max = 16;
static struct nbd_device nbd_dev[MAX_NBD];
/*
diff --git a/drivers/block/ps2esdi.c b/drivers/block/ps2esdi.c
index aef5a0c..5537974 100644
--- a/drivers/block/ps2esdi.c
+++ b/drivers/block/ps2esdi.c
@@ -340,9 +340,9 @@
/* try to grab IRQ, and try to grab a slow IRQ if it fails, so we can
share with the SCSI driver */
if (request_irq(PS2ESDI_IRQ, ps2esdi_interrupt_handler,
- SA_INTERRUPT | SA_SHIRQ, "PS/2 ESDI", &ps2esdi_gendisk)
+ IRQF_DISABLED | IRQF_SHARED, "PS/2 ESDI", &ps2esdi_gendisk)
&& request_irq(PS2ESDI_IRQ, ps2esdi_interrupt_handler,
- SA_SHIRQ, "PS/2 ESDI", &ps2esdi_gendisk)
+ IRQF_SHARED, "PS/2 ESDI", &ps2esdi_gendisk)
) {
printk("%s: Unable to get IRQ %d\n", DEVICE_NAME, PS2ESDI_IRQ);
error = -EBUSY;
diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c
index 10a4aa5..c6beee18 100644
--- a/drivers/block/sx8.c
+++ b/drivers/block/sx8.c
@@ -1676,7 +1676,7 @@
pci_set_master(pdev);
- rc = request_irq(pdev->irq, carm_interrupt, SA_SHIRQ, DRV_NAME, host);
+ rc = request_irq(pdev->irq, carm_interrupt, IRQF_SHARED, DRV_NAME, host);
if (rc) {
printk(KERN_ERR DRV_NAME "(%s): irq alloc failure\n",
pci_name(pdev));
diff --git a/drivers/block/umem.c b/drivers/block/umem.c
index f675f97..5d8925b 100644
--- a/drivers/block/umem.c
+++ b/drivers/block/umem.c
@@ -1040,7 +1040,7 @@
card->win_size = data;
- if (request_irq(dev->irq, mm_interrupt, SA_SHIRQ, "pci-umem", card)) {
+ if (request_irq(dev->irq, mm_interrupt, IRQF_SHARED, "pci-umem", card)) {
printk(KERN_ERR "MM%d: Unable to allocate IRQ\n", card->card_number);
ret = -ENODEV;
diff --git a/drivers/cdrom/cdu31a.c b/drivers/cdrom/cdu31a.c
index 5f0f202..37bdb01 100644
--- a/drivers/cdrom/cdu31a.c
+++ b/drivers/cdrom/cdu31a.c
@@ -3141,7 +3141,7 @@
if (cdu31a_irq > 0) {
if (request_irq
- (cdu31a_irq, cdu31a_interrupt, SA_INTERRUPT,
+ (cdu31a_irq, cdu31a_interrupt, IRQF_DISABLED,
"cdu31a", NULL)) {
printk(KERN_WARNING PFX "Unable to grab IRQ%d for "
"the CDU31A driver\n", cdu31a_irq);
diff --git a/drivers/cdrom/mcdx.c b/drivers/cdrom/mcdx.c
index 788c7a0..dcd1ab6 100644
--- a/drivers/cdrom/mcdx.c
+++ b/drivers/cdrom/mcdx.c
@@ -1193,7 +1193,7 @@
}
xtrace(INIT, "init() subscribe irq and i/o\n");
- if (request_irq(stuffp->irq, mcdx_intr, SA_INTERRUPT, "mcdx", stuffp)) {
+ if (request_irq(stuffp->irq, mcdx_intr, IRQF_DISABLED, "mcdx", stuffp)) {
release_region(stuffp->wreg_data, MCDX_IO_SIZE);
xwarn("%s=0x%03x,%d: Init failed. Can't get irq (%d).\n",
MCDX, stuffp->wreg_data, stuffp->irq, stuffp->irq);
diff --git a/drivers/cdrom/sonycd535.c b/drivers/cdrom/sonycd535.c
index 8f7cc45..30ab562 100644
--- a/drivers/cdrom/sonycd535.c
+++ b/drivers/cdrom/sonycd535.c
@@ -1527,7 +1527,7 @@
}
if (sony535_irq_used > 0) {
if (request_irq(sony535_irq_used, cdu535_interrupt,
- SA_INTERRUPT, CDU535_HANDLE, NULL)) {
+ IRQF_DISABLED, CDU535_HANDLE, NULL)) {
printk("Unable to grab IRQ%d for the " CDU535_MESSAGE_NAME
" driver; polling instead.\n", sony535_irq_used);
sony535_irq_used = 0;
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 3e7dc7c..9d6713a 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -2051,7 +2051,7 @@
/* set ISRs, and then disable the rx interrupts */
request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state);
- request_irq(IRQ_AMIGA_RBF, ser_rx_int, SA_INTERRUPT, "serial RX", state);
+ request_irq(IRQ_AMIGA_RBF, ser_rx_int, IRQF_DISABLED, "serial RX", state);
/* turn off Rx and Tx interrupts */
custom.intena = IF_RBF | IF_TBE;
diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c
index 72fb607..bcc4668 100644
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -229,7 +229,7 @@
continue;
}
- if (request_irq(dev->irq, &ac_interrupt, SA_SHIRQ, "Applicom PCI", &dummy)) {
+ if (request_irq(dev->irq, &ac_interrupt, IRQF_SHARED, "Applicom PCI", &dummy)) {
printk(KERN_INFO "Could not allocate IRQ %d for PCI Applicom device.\n", dev->irq);
iounmap(RamIO);
pci_disable_device(dev);
@@ -276,7 +276,7 @@
printk(KERN_NOTICE "Applicom ISA card found at mem 0x%lx, irq %d\n", mem + (LEN_RAM_IO*i), irq);
if (!numisa) {
- if (request_irq(irq, &ac_interrupt, SA_SHIRQ, "Applicom ISA", &dummy)) {
+ if (request_irq(irq, &ac_interrupt, IRQF_SHARED, "Applicom ISA", &dummy)) {
printk(KERN_WARNING "Could not allocate IRQ %d for ISA Applicom device.\n", irq);
iounmap(RamIO);
apbs[boardno - 1].RamIO = NULL;
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 1f61a67..c1c6728 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -4612,7 +4612,7 @@
/* allocate IRQ */
if(request_irq(cy_isa_irq, cyy_interrupt,
- SA_INTERRUPT, "Cyclom-Y", &cy_card[j]))
+ IRQF_DISABLED, "Cyclom-Y", &cy_card[j]))
{
printk("Cyclom-Y/ISA found at 0x%lx ",
(unsigned long) cy_isa_address);
@@ -4785,7 +4785,7 @@
/* allocate IRQ */
if(request_irq(cy_pci_irq, cyy_interrupt,
- SA_SHIRQ, "Cyclom-Y", &cy_card[j]))
+ IRQF_SHARED, "Cyclom-Y", &cy_card[j]))
{
printk("Cyclom-Y/PCI found at 0x%lx ",
(ulong) cy_pci_phys2);
@@ -4965,7 +4965,7 @@
/* allocate IRQ only if board has an IRQ */
if( (cy_pci_irq != 0) && (cy_pci_irq != 255) ) {
if(request_irq(cy_pci_irq, cyz_interrupt,
- SA_SHIRQ, "Cyclades-Z", &cy_card[j]))
+ IRQF_SHARED, "Cyclades-Z", &cy_card[j]))
{
printk("Cyclom-8Zo/PCI found at 0x%lx ",
(ulong) cy_pci_phys2);
@@ -5059,7 +5059,7 @@
/* allocate IRQ only if board has an IRQ */
if( (cy_pci_irq != 0) && (cy_pci_irq != 255) ) {
if(request_irq(cy_pci_irq, cyz_interrupt,
- SA_SHIRQ, "Cyclades-Z", &cy_card[j]))
+ IRQF_SHARED, "Cyclades-Z", &cy_card[j]))
{
printk("Cyclom-Ze/PCI found at 0x%lx ",
(ulong) cy_pci_phys2);
diff --git a/drivers/char/drm/drm_irq.c b/drivers/char/drm/drm_irq.c
index 611a117..ebdb718 100644
--- a/drivers/char/drm/drm_irq.c
+++ b/drivers/char/drm/drm_irq.c
@@ -130,7 +130,7 @@
/* Install handler */
if (drm_core_check_feature(dev, DRIVER_IRQ_SHARED))
- sh_flags = SA_SHIRQ;
+ sh_flags = IRQF_SHARED;
ret = request_irq(dev->irq, dev->driver->irq_handler,
sh_flags, dev->devname, dev);
diff --git a/drivers/char/esp.c b/drivers/char/esp.c
index 9827d17..afcd83d 100644
--- a/drivers/char/esp.c
+++ b/drivers/char/esp.c
@@ -883,7 +883,7 @@
* Allocate the IRQ
*/
- retval = request_irq(info->irq, rs_interrupt_single, SA_SHIRQ,
+ retval = request_irq(info->irq, rs_interrupt_single, IRQF_SHARED,
"esp serial", info);
if (retval) {
diff --git a/drivers/char/ftape/lowlevel/fdc-io.c b/drivers/char/ftape/lowlevel/fdc-io.c
index 093fdf9..65c9d2e 100644
--- a/drivers/char/ftape/lowlevel/fdc-io.c
+++ b/drivers/char/ftape/lowlevel/fdc-io.c
@@ -1268,7 +1268,7 @@
/* Get fast interrupt handler.
*/
if (request_irq(fdc.irq, ftape_interrupt,
- SA_INTERRUPT, "ft", ftape_id)) {
+ IRQF_DISABLED, "ft", ftape_id)) {
TRACE_ABORT(-EIO, ft_t_bug,
"Unable to grab IRQ%d for ftape driver",
fdc.irq);
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 8b6c76f..e5643f3 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -395,7 +395,7 @@
sprintf(devp->hd_name, "hpet%d", (int)(devp - hpetp->hp_dev));
irq_flags = devp->hd_flags & HPET_SHARED_IRQ
- ? SA_SHIRQ : SA_INTERRUPT;
+ ? IRQF_SHARED : IRQF_DISABLED;
if (request_irq(irq, hpet_interrupt, irq_flags,
devp->hd_name, (void *)devp)) {
printk(KERN_ERR "hpet: IRQ %d is not free\n", irq);
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 859e500..ca2f538 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -346,7 +346,7 @@
spin_unlock_irqrestore(&hp->lock, flags);
/* check error, fallback to non-irq */
if (irq != NO_IRQ)
- rc = request_irq(irq, hvc_handle_interrupt, SA_INTERRUPT, "hvc_console", hp);
+ rc = request_irq(irq, hvc_handle_interrupt, IRQF_DISABLED, "hvc_console", hp);
/*
* If the request_irq() fails and we return an error. The tty layer
diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index 130dedc..4589ff3 100644
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c
@@ -899,7 +899,7 @@
* the conn was registered and now.
*/
if (!(rc = request_irq(irq, &hvcs_handle_interrupt,
- SA_INTERRUPT, "ibmhvcs", hvcsd))) {
+ IRQF_DISABLED, "ibmhvcs", hvcsd))) {
/*
* It is possible the vty-server was removed after the irq was
* requested but before we have time to enable interrupts.
diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c
index 7b04eb1..8dc205b 100644
--- a/drivers/char/hvsi.c
+++ b/drivers/char/hvsi.c
@@ -1168,7 +1168,7 @@
struct hvsi_struct *hp = &hvsi_ports[i];
int ret = 1;
- ret = request_irq(hp->virq, hvsi_interrupt, SA_INTERRUPT, "hvsi", hp);
+ ret = request_irq(hp->virq, hvsi_interrupt, IRQF_DISABLED, "hvsi", hp);
if (ret)
printk(KERN_ERR "HVSI: couldn't reserve irq 0x%x (error %i)\n",
hp->virq, ret);
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index f9aa53c..a4200a2 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -491,8 +491,8 @@
/* initialisation of the devices and driver structures, and registers itself */
/* with the relevant kernel modules. */
/******************************************************************************/
-/* SA_INTERRUPT- if set blocks all interrupts else only this line */
-/* SA_SHIRQ - for shared irq PCI or maybe EISA only */
+/* IRQF_DISABLED - if set blocks all interrupts else only this line */
+/* IRQF_SHARED - for shared irq PCI or maybe EISA only */
/* SA_RANDOM - can be source for cert. random number generators */
#define IP2_SA_FLAGS 0
@@ -753,7 +753,7 @@
if (have_requested_irq(ip2config.irq[i]))
continue;
rc = request_irq( ip2config.irq[i], ip2_interrupt,
- IP2_SA_FLAGS | (ip2config.type[i] == PCI ? SA_SHIRQ : 0),
+ IP2_SA_FLAGS | (ip2config.type[i] == PCI ? IRQF_SHARED : 0),
pcName, (void *)&pcName);
if (rc) {
printk(KERN_ERR "IP2: an request_irq failed: error %d\n",rc);
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index c7f3e5c..f57eba0 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1041,7 +1041,7 @@
if (info->si_type == SI_BT) {
rv = request_irq(info->irq,
si_bt_irq_handler,
- SA_INTERRUPT,
+ IRQF_DISABLED,
DEVICE_NAME,
info);
if (!rv)
@@ -1051,7 +1051,7 @@
} else
rv = request_irq(info->irq,
si_irq_handler,
- SA_INTERRUPT,
+ IRQF_DISABLED,
DEVICE_NAME,
info);
if (rv) {
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index c105b95..913be23 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -1614,14 +1614,14 @@
const unsigned int index)
{
struct isi_board *board = pci_get_drvdata(pdev);
- unsigned long irqflags = SA_INTERRUPT;
+ unsigned long irqflags = IRQF_DISABLED;
int retval = -EINVAL;
if (!board->base)
goto end;
if (board->isa == NO)
- irqflags |= SA_SHIRQ;
+ irqflags |= IRQF_SHARED;
retval = request_irq(board->irq, isicom_interrupt, irqflags,
ISICOM_NAME, board);
diff --git a/drivers/char/ite_gpio.c b/drivers/char/ite_gpio.c
index d1ed6ac..747ba45 100644
--- a/drivers/char/ite_gpio.c
+++ b/drivers/char/ite_gpio.c
@@ -397,7 +397,7 @@
init_waitqueue_head(&ite_gpio_wait[i]);
}
- if (request_irq(ite_gpio_irq, ite_gpio_irq_handler, SA_SHIRQ, "gpio", 0) < 0) {
+ if (request_irq(ite_gpio_irq, ite_gpio_irq_handler, IRQF_SHARED, "gpio", 0) < 0) {
misc_deregister(&ite_gpio_miscdev);
release_region(ite_gpio_base, 0x1c);
return 0;
diff --git a/drivers/char/mbcs.c b/drivers/char/mbcs.c
index bb07c27..0385650 100644
--- a/drivers/char/mbcs.c
+++ b/drivers/char/mbcs.c
@@ -592,7 +592,7 @@
getdma->intrHostDest = sn_irq->irq_xtalkaddr;
getdma->intrVector = sn_irq->irq_irq;
if (request_irq(sn_irq->irq_irq,
- (void *)mbcs_completion_intr_handler, SA_SHIRQ,
+ (void *)mbcs_completion_intr_handler, IRQF_SHARED,
"MBCS get intr", (void *)soft)) {
tiocx_irq_free(soft->get_sn_irq);
return -EAGAIN;
@@ -608,7 +608,7 @@
putdma->intrHostDest = sn_irq->irq_xtalkaddr;
putdma->intrVector = sn_irq->irq_irq;
if (request_irq(sn_irq->irq_irq,
- (void *)mbcs_completion_intr_handler, SA_SHIRQ,
+ (void *)mbcs_completion_intr_handler, IRQF_SHARED,
"MBCS put intr", (void *)soft)) {
tiocx_irq_free(soft->put_sn_irq);
free_irq(soft->get_sn_irq->irq_irq, soft);
@@ -628,7 +628,7 @@
algo->intrHostDest = sn_irq->irq_xtalkaddr;
algo->intrVector = sn_irq->irq_irq;
if (request_irq(sn_irq->irq_irq,
- (void *)mbcs_completion_intr_handler, SA_SHIRQ,
+ (void *)mbcs_completion_intr_handler, IRQF_SHARED,
"MBCS algo intr", (void *)soft)) {
tiocx_irq_free(soft->algo_sn_irq);
free_irq(soft->put_sn_irq->irq_irq, soft);
diff --git a/drivers/char/mmtimer.c b/drivers/char/mmtimer.c
index 95e8122..70b774f 100644
--- a/drivers/char/mmtimer.c
+++ b/drivers/char/mmtimer.c
@@ -687,7 +687,7 @@
mmtimer_femtoperiod = ((unsigned long)1E15 + sn_rtc_cycles_per_second /
2) / sn_rtc_cycles_per_second;
- if (request_irq(SGI_MMTIMER_VECTOR, mmtimer_interrupt, SA_PERCPU_IRQ, MMTIMER_NAME, NULL)) {
+ if (request_irq(SGI_MMTIMER_VECTOR, mmtimer_interrupt, IRQF_PERCPU, MMTIMER_NAME, NULL)) {
printk(KERN_WARNING "%s: unable to allocate interrupt.",
MMTIMER_NAME);
return -1;
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index eb1559f..556abd3 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -94,7 +94,7 @@
#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK|\
IXON|IXOFF))
-#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? SA_SHIRQ : SA_INTERRUPT)
+#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? IRQF_SHARED : IRQF_DISABLED)
#define C168_ASIC_ID 1
#define C104_ASIC_ID 2
diff --git a/drivers/char/nwbutton.c b/drivers/char/nwbutton.c
index 94845dd..f240a10 100644
--- a/drivers/char/nwbutton.c
+++ b/drivers/char/nwbutton.c
@@ -223,7 +223,7 @@
return -EBUSY;
}
- if (request_irq (IRQ_NETWINDER_BUTTON, button_handler, SA_INTERRUPT,
+ if (request_irq (IRQ_NETWINDER_BUTTON, button_handler, IRQF_DISABLED,
"nwbutton", NULL)) {
printk (KERN_WARNING "nwbutton: IRQ %d is not free.\n",
IRQ_NETWINDER_BUTTON);
diff --git a/drivers/char/qtronix.c b/drivers/char/qtronix.c
index 1087530..9d134e9 100644
--- a/drivers/char/qtronix.c
+++ b/drivers/char/qtronix.c
@@ -144,7 +144,7 @@
cir_port_init(cir);
retval = request_irq(IT8172_CIR0_IRQ, kbd_int_handler,
- (unsigned long )(SA_INTERRUPT|SA_SHIRQ),
+ (unsigned long )(IRQF_DISABLED|IRQF_SHARED),
(const char *)"Qtronix IR Keyboard", (void *)cir);
if (retval) {
diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c
index 5332d1d..3afc6a4 100644
--- a/drivers/char/rio/rio_linux.c
+++ b/drivers/char/rio/rio_linux.c
@@ -1119,7 +1119,7 @@
for (i = 0; i < p->RIONumHosts; i++) {
hp = &p->RIOHosts[i];
if (hp->Ivec) {
- int mode = SA_SHIRQ;
+ int mode = IRQF_SHARED;
if (hp->Ivec & 0x8000) {
mode = 0;
hp->Ivec &= 0x7fff;
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index c84c3c3..f1c94f7 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -625,7 +625,7 @@
if (bp->flags & RC_BOARD_ACTIVE)
return 0;
- error = request_irq(bp->irq, rc_interrupt, SA_INTERRUPT,
+ error = request_irq(bp->irq, rc_interrupt, IRQF_DISABLED,
"RISCom/8", NULL);
if (error)
return error;
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index 37dc2ed..aefac4a 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -220,7 +220,7 @@
#ifdef RTC_IRQ
/*
- * A very tiny interrupt handler. It runs with SA_INTERRUPT set,
+ * A very tiny interrupt handler. It runs with IRQF_DISABLED set,
* but there is possibility of conflicting with the set_rtc_mmss()
* call (the rtc irq and the timer irq can easily run at the same
* time in two different CPUs). So we need to serialize
@@ -958,7 +958,7 @@
* XXX Interrupt pin #7 in Espresso is shared between RTC and
* PCI Slot 2 INTA# (and some INTx# in Slot 1).
*/
- if (request_irq(rtc_irq, rtc_interrupt, SA_SHIRQ, "rtc", (void *)&rtc_port)) {
+ if (request_irq(rtc_irq, rtc_interrupt, IRQF_SHARED, "rtc", (void *)&rtc_port)) {
printk(KERN_ERR "rtc: cannot register IRQ %d\n", rtc_irq);
return -EIO;
}
@@ -976,7 +976,7 @@
rtc_int_handler_ptr = rtc_interrupt;
}
- if(request_irq(RTC_IRQ, rtc_int_handler_ptr, SA_INTERRUPT, "rtc", NULL)) {
+ if(request_irq(RTC_IRQ, rtc_int_handler_ptr, IRQF_DISABLED, "rtc", NULL)) {
/* Yeah right, seeing as irq 8 doesn't even hit the bus. */
printk(KERN_ERR "rtc: IRQ %d is not free.\n", RTC_IRQ);
release_region(RTC_PORT(0), RTC_IO_EXTENT);
diff --git a/drivers/char/s3c2410-rtc.c b/drivers/char/s3c2410-rtc.c
index b0038b1..5458ef1 100644
--- a/drivers/char/s3c2410-rtc.c
+++ b/drivers/char/s3c2410-rtc.c
@@ -341,13 +341,13 @@
int ret;
ret = request_irq(s3c2410_rtc_alarmno, s3c2410_rtc_alarmirq,
- SA_INTERRUPT, "s3c2410-rtc alarm", NULL);
+ IRQF_DISABLED, "s3c2410-rtc alarm", NULL);
if (ret)
printk(KERN_ERR "IRQ%d already in use\n", s3c2410_rtc_alarmno);
ret = request_irq(s3c2410_rtc_tickno, s3c2410_rtc_tickirq,
- SA_INTERRUPT, "s3c2410-rtc tick", NULL);
+ IRQF_DISABLED, "s3c2410-rtc tick", NULL);
if (ret) {
printk(KERN_ERR "IRQ%d already in use\n", s3c2410_rtc_tickno);
diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c
index 56c8243..203240b 100644
--- a/drivers/char/snsc.c
+++ b/drivers/char/snsc.c
@@ -105,7 +105,7 @@
/* hook this subchannel up to the system controller interrupt */
rv = request_irq(SGI_UART_VECTOR, scdrv_interrupt,
- SA_SHIRQ | SA_INTERRUPT,
+ IRQF_SHARED | IRQF_DISABLED,
SYSCTL_BASENAME, sd);
if (rv) {
ia64_sn_irtr_close(sd->sd_nasid, sd->sd_subch);
diff --git a/drivers/char/snsc_event.c b/drivers/char/snsc_event.c
index e234d50..8b2210b 100644
--- a/drivers/char/snsc_event.c
+++ b/drivers/char/snsc_event.c
@@ -310,7 +310,7 @@
/* hook event subchannel up to the system controller interrupt */
rv = request_irq(SGI_UART_VECTOR, scdrv_event_interrupt,
- SA_SHIRQ | SA_INTERRUPT,
+ IRQF_SHARED | IRQF_DISABLED,
"system controller events", event_sd);
if (rv) {
printk(KERN_WARNING "%s: irq request failed (%d)\n",
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index e19d485..45508a0 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -1282,7 +1282,7 @@
while (irq_list->irq) {
if (!request_irq(irq_list->irq, sonypi_irq,
- SA_SHIRQ, "sonypi", sonypi_irq)) {
+ IRQF_SHARED, "sonypi", sonypi_irq)) {
dev->irq = irq_list->irq;
dev->bits = irq_list->bits;
return 0;
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index d4243fb..cb28592 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -1015,9 +1015,9 @@
return 0;
if (bp->flags & SX_BOARD_IS_PCI)
- error = request_irq(bp->irq, sx_interrupt, SA_INTERRUPT | SA_SHIRQ, "specialix IO8+", bp);
+ error = request_irq(bp->irq, sx_interrupt, IRQF_DISABLED | IRQF_SHARED, "specialix IO8+", bp);
else
- error = request_irq(bp->irq, sx_interrupt, SA_INTERRUPT, "specialix IO8+", bp);
+ error = request_irq(bp->irq, sx_interrupt, IRQF_DISABLED, "specialix IO8+", bp);
if (error)
return error;
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index f15df0e..ed7b8ea 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -2302,7 +2302,7 @@
brdp->nrpanels = 1;
brdp->state |= BRD_FOUND;
brdp->hwid = status;
- if (request_irq(brdp->irq, stl_intr, SA_SHIRQ, name, brdp) != 0) {
+ if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) {
printk("STALLION: failed to register interrupt "
"routine for %s irq=%d\n", name, brdp->irq);
rc = -ENODEV;
@@ -2512,7 +2512,7 @@
outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl);
brdp->state |= BRD_FOUND;
- if (request_irq(brdp->irq, stl_intr, SA_SHIRQ, name, brdp) != 0) {
+ if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) {
printk("STALLION: failed to register interrupt "
"routine for %s irq=%d\n", name, brdp->irq);
i = -ENODEV;
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index 76b9107..45c193a 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -1993,7 +1993,7 @@
if(board->irq > 0) {
/* fixed irq, probably PCI */
if(sx_irqmask & (1 << board->irq)) { /* may we use this irq? */
- if(request_irq(board->irq, sx_interrupt, SA_SHIRQ | SA_INTERRUPT, "sx", board)) {
+ if(request_irq(board->irq, sx_interrupt, IRQF_SHARED | IRQF_DISABLED, "sx", board)) {
printk(KERN_ERR "sx: Cannot allocate irq %d.\n", board->irq);
board->irq = 0;
}
@@ -2005,7 +2005,7 @@
int irqmask = sx_irqmask & (IS_SX_BOARD(board) ? SX_ISA_IRQ_MASK : SI2_ISA_IRQ_MASK);
for(irqnr = 15; irqnr > 0; irqnr--)
if(irqmask & (1 << irqnr))
- if(! request_irq(irqnr, sx_interrupt, SA_SHIRQ | SA_INTERRUPT, "sx", board))
+ if(! request_irq(irqnr, sx_interrupt, IRQF_SHARED | IRQF_DISABLED, "sx", board))
break;
if(! irqnr)
printk(KERN_ERR "sx: Cannot allocate IRQ.\n");
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index fee2aca..df782dd 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -8150,7 +8150,7 @@
info->bus_type = MGSL_BUS_TYPE_PCI;
info->io_addr_size = 8;
- info->irq_flags = SA_SHIRQ;
+ info->irq_flags = IRQF_SHARED;
if (dev->device == 0x0210) {
/* Version 1 PCI9030 based universal PCI adapter */
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 03edccc..e829594 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -3343,7 +3343,7 @@
info->phys_reg_addr = pci_resource_start(pdev,0);
info->bus_type = MGSL_BUS_TYPE_PCI;
- info->irq_flags = SA_SHIRQ;
+ info->irq_flags = IRQF_SHARED;
info->init_error = -1; /* assume error, set to 0 on successful init */
}
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index ba54df3..1e443a2 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -3835,7 +3835,7 @@
info->phys_statctrl_base &= ~(PAGE_SIZE-1);
info->bus_type = MGSL_BUS_TYPE_PCI;
- info->irq_flags = SA_SHIRQ;
+ info->irq_flags = IRQF_SHARED;
init_timer(&info->tx_timer);
info->tx_timer.data = (unsigned long)info;
diff --git a/drivers/char/tlclk.c b/drivers/char/tlclk.c
index dfc4437..952b829 100644
--- a/drivers/char/tlclk.c
+++ b/drivers/char/tlclk.c
@@ -208,7 +208,7 @@
/* This device is wired through the FPGA IO space of the ATCA blade
* we can't share this IRQ */
result = request_irq(telclk_interrupt, &tlclk_interrupt,
- SA_INTERRUPT, "telco_clock", tlclk_interrupt);
+ IRQF_DISABLED, "telco_clock", tlclk_interrupt);
if (result == -EBUSY) {
printk(KERN_ERR "tlclk: Interrupt can't be reserved.\n");
return -EBUSY;
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 8ea7062..abb0f2a 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -522,7 +522,7 @@
iowrite8(i, chip->vendor.iobase +
TPM_INT_VECTOR(chip->vendor.locality));
if (request_irq
- (i, tis_int_probe, SA_SHIRQ,
+ (i, tis_int_probe, IRQF_SHARED,
chip->vendor.miscdev.name, chip) != 0) {
dev_info(chip->dev,
"Unable to request irq: %d for probe\n",
@@ -557,7 +557,7 @@
chip->vendor.iobase +
TPM_INT_VECTOR(chip->vendor.locality));
if (request_irq
- (chip->vendor.irq, tis_int_handler, SA_SHIRQ,
+ (chip->vendor.irq, tis_int_handler, IRQF_SHARED,
chip->vendor.miscdev.name, chip) != 0) {
dev_info(chip->dev,
"Unable to request irq: %d for use\n",
diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c
index b17a6e2..bfe5ea9 100644
--- a/drivers/char/vme_scc.c
+++ b/drivers/char/vme_scc.c
@@ -203,13 +203,13 @@
port->datap = port->ctrlp + 1;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
- request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT,
+ request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
"SCC-A TX", port);
- request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT,
+ request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
"SCC-A status", port);
- request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT,
+ request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
"SCC-A RX", port);
- request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT,
+ request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
"SCC-A special cond", port);
{
SCC_ACCESS_INIT(port);
@@ -230,13 +230,13 @@
port->datap = port->ctrlp + 1;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
- request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT,
+ request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
"SCC-B TX", port);
- request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT,
+ request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
"SCC-B status", port);
- request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT,
+ request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
"SCC-B RX", port);
- request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT,
+ request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
"SCC-B special cond", port);
{
SCC_ACCESS_INIT(port);
@@ -273,13 +273,13 @@
port->datap = port->ctrlp + 2;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
- request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT,
+ request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
"SCC-A TX", port);
- request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT,
+ request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
"SCC-A status", port);
- request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT,
+ request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
"SCC-A RX", port);
- request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT,
+ request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
"SCC-A special cond", port);
{
SCC_ACCESS_INIT(port);
@@ -300,13 +300,13 @@
port->datap = port->ctrlp + 2;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
- request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT,
+ request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
"SCC-B TX", port);
- request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT,
+ request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
"SCC-B status", port);
- request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT,
+ request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
"SCC-B RX", port);
- request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT,
+ request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
"SCC-B special cond", port);
{
@@ -341,13 +341,13 @@
port->datap = port->ctrlp + 4;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
- request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT,
+ request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
"SCC-A TX", port);
- request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT,
+ request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
"SCC-A status", port);
- request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT,
+ request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
"SCC-A RX", port);
- request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT,
+ request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
"SCC-A special cond", port);
{
SCC_ACCESS_INIT(port);
@@ -368,13 +368,13 @@
port->datap = port->ctrlp + 4;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
- request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT,
+ request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
"SCC-B TX", port);
- request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT,
+ request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
"SCC-B status", port);
- request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT,
+ request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
"SCC-B RX", port);
- request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT,
+ request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
"SCC-B special cond", port);
{
diff --git a/drivers/char/watchdog/eurotechwdt.c b/drivers/char/watchdog/eurotechwdt.c
index e89cda0..ea670de 100644
--- a/drivers/char/watchdog/eurotechwdt.c
+++ b/drivers/char/watchdog/eurotechwdt.c
@@ -420,7 +420,7 @@
goto out;
}
- ret = request_irq(irq, eurwdt_interrupt, SA_INTERRUPT, "eurwdt", NULL);
+ ret = request_irq(irq, eurwdt_interrupt, IRQF_DISABLED, "eurwdt", NULL);
if(ret) {
printk(KERN_ERR "eurwdt: IRQ %d is not free.\n", irq);
goto outmisc;
diff --git a/drivers/char/watchdog/mpcore_wdt.c b/drivers/char/watchdog/mpcore_wdt.c
index 9c11d92..c2d492c 100644
--- a/drivers/char/watchdog/mpcore_wdt.c
+++ b/drivers/char/watchdog/mpcore_wdt.c
@@ -355,7 +355,7 @@
goto err_misc;
}
- ret = request_irq(wdt->irq, mpcore_wdt_fire, SA_INTERRUPT, "mpcore_wdt", wdt);
+ ret = request_irq(wdt->irq, mpcore_wdt_fire, IRQF_DISABLED, "mpcore_wdt", wdt);
if (ret) {
dev_printk(KERN_ERR, _dev, "cannot register IRQ%d for watchdog\n", wdt->irq);
goto err_irq;
diff --git a/drivers/char/watchdog/wdt.c b/drivers/char/watchdog/wdt.c
index 2586e9e..a1d972c 100644
--- a/drivers/char/watchdog/wdt.c
+++ b/drivers/char/watchdog/wdt.c
@@ -580,7 +580,7 @@
goto out;
}
- ret = request_irq(irq, wdt_interrupt, SA_INTERRUPT, "wdt501p", NULL);
+ ret = request_irq(irq, wdt_interrupt, IRQF_DISABLED, "wdt501p", NULL);
if(ret) {
printk(KERN_ERR "wdt: IRQ %d is not free.\n", irq);
goto outreg;
diff --git a/drivers/char/watchdog/wdt_pci.c b/drivers/char/watchdog/wdt_pci.c
index c79cc95..7529ecd 100644
--- a/drivers/char/watchdog/wdt_pci.c
+++ b/drivers/char/watchdog/wdt_pci.c
@@ -617,7 +617,7 @@
goto out_pci;
}
- if (request_irq (irq, wdtpci_interrupt, SA_INTERRUPT | SA_SHIRQ,
+ if (request_irq (irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED,
"wdt_pci", &wdtpci_miscdev)) {
printk (KERN_ERR PFX "IRQ %d is not free\n", irq);
goto out_reg;
diff --git a/drivers/dma/ioatdma.c b/drivers/dma/ioatdma.c
index 2801d14..ecad8f6 100644
--- a/drivers/dma/ioatdma.c
+++ b/drivers/dma/ioatdma.c
@@ -739,7 +739,7 @@
device->msi = 0;
}
#endif
- err = request_irq(pdev->irq, &ioat_do_interrupt, SA_SHIRQ, "ioat",
+ err = request_irq(pdev->irq, &ioat_do_interrupt, IRQF_SHARED, "ioat",
device);
if (err)
goto err_irq;
diff --git a/drivers/edac/amd76x_edac.c b/drivers/edac/amd76x_edac.c
index d75864e..f79f6b5 100644
--- a/drivers/edac/amd76x_edac.c
+++ b/drivers/edac/amd76x_edac.c
@@ -19,8 +19,8 @@
#include <linux/slab.h>
#include "edac_mc.h"
-#define AMD76X_REVISION " Ver: 2.0.0 " __DATE__
-
+#define AMD76X_REVISION " Ver: 2.0.1 " __DATE__
+#define EDAC_MOD_STR "amd76x_edac"
#define amd76x_printk(level, fmt, arg...) \
edac_printk(level, "amd76x", fmt, ##arg)
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index 815c3eb..c82bc0e 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -24,7 +24,8 @@
#include <linux/slab.h>
#include "edac_mc.h"
-#define E752X_REVISION " Ver: 2.0.0 " __DATE__
+#define E752X_REVISION " Ver: 2.0.1 " __DATE__
+#define EDAC_MOD_STR "e752x_edac"
static int force_function_unhide;
diff --git a/drivers/edac/e7xxx_edac.c b/drivers/edac/e7xxx_edac.c
index 5a5ecd5..310d91b 100644
--- a/drivers/edac/e7xxx_edac.c
+++ b/drivers/edac/e7xxx_edac.c
@@ -29,7 +29,8 @@
#include <linux/slab.h>
#include "edac_mc.h"
-#define E7XXX_REVISION " Ver: 2.0.0 " __DATE__
+#define E7XXX_REVISION " Ver: 2.0.1 " __DATE__
+#define EDAC_MOD_STR "e7xxx_edac"
#define e7xxx_printk(level, fmt, arg...) \
edac_printk(level, "e7xxx", fmt, ##arg)
diff --git a/drivers/edac/edac_mc.h b/drivers/edac/edac_mc.h
index 1be4947..bf6ab8a 100644
--- a/drivers/edac/edac_mc.h
+++ b/drivers/edac/edac_mc.h
@@ -78,10 +78,6 @@
#endif /* !CONFIG_EDAC_DEBUG */
-#define edac_xstr(s) edac_str(s)
-#define edac_str(s) #s
-#define EDAC_MOD_STR edac_xstr(KBUILD_BASENAME)
-
#define BIT(x) (1 << (x))
#define PCI_VEND_DEV(vend, dev) PCI_VENDOR_ID_ ## vend, \
diff --git a/drivers/edac/i82860_edac.c b/drivers/edac/i82860_edac.c
index e30a4a2..e4bb298 100644
--- a/drivers/edac/i82860_edac.c
+++ b/drivers/edac/i82860_edac.c
@@ -16,7 +16,8 @@
#include <linux/slab.h>
#include "edac_mc.h"
-#define I82860_REVISION " Ver: 2.0.0 " __DATE__
+#define I82860_REVISION " Ver: 2.0.1 " __DATE__
+#define EDAC_MOD_STR "i82860_edac"
#define i82860_printk(level, fmt, arg...) \
edac_printk(level, "i82860", fmt, ##arg)
diff --git a/drivers/edac/i82875p_edac.c b/drivers/edac/i82875p_edac.c
index 9423ee5..161fe09 100644
--- a/drivers/edac/i82875p_edac.c
+++ b/drivers/edac/i82875p_edac.c
@@ -20,7 +20,8 @@
#include <linux/slab.h>
#include "edac_mc.h"
-#define I82875P_REVISION " Ver: 2.0.0 " __DATE__
+#define I82875P_REVISION " Ver: 2.0.1 " __DATE__
+#define EDAC_MOD_STR "i82875p_edac"
#define i82875p_printk(level, fmt, arg...) \
edac_printk(level, "i82875p", fmt, ##arg)
diff --git a/drivers/edac/r82600_edac.c b/drivers/edac/r82600_edac.c
index a0e248d..a49cf0a 100644
--- a/drivers/edac/r82600_edac.c
+++ b/drivers/edac/r82600_edac.c
@@ -22,7 +22,8 @@
#include <linux/slab.h>
#include "edac_mc.h"
-#define R82600_REVISION " Ver: 2.0.0 " __DATE__
+#define R82600_REVISION " Ver: 2.0.1 " __DATE__
+#define EDAC_MOD_STR "r82600_edac"
#define r82600_printk(level, fmt, arg...) \
edac_printk(level, "r82600", fmt, ##arg)
diff --git a/drivers/fc4/soc.c b/drivers/fc4/soc.c
index cf8768b..3b07e0c 100644
--- a/drivers/fc4/soc.c
+++ b/drivers/fc4/soc.c
@@ -637,7 +637,7 @@
irq = sdev->irqs[0];
- if (request_irq (irq, soc_intr, SA_SHIRQ, "SOC", (void *)s)) {
+ if (request_irq (irq, soc_intr, IRQF_SHARED, "SOC", (void *)s)) {
soc_printk ("Cannot order irq %d to go\n", irq);
socs = s->next;
return;
diff --git a/drivers/fc4/socal.c b/drivers/fc4/socal.c
index f52d1e5b..2b75edc 100644
--- a/drivers/fc4/socal.c
+++ b/drivers/fc4/socal.c
@@ -761,7 +761,7 @@
irq = sdev->irqs[0];
- if (request_irq (irq, socal_intr, SA_SHIRQ, "SOCAL", (void *)s)) {
+ if (request_irq (irq, socal_intr, IRQF_SHARED, "SOCAL", (void *)s)) {
socal_printk ("Cannot order irq %d to go\n", irq);
socals = s->next;
return;
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index de93601..377ab40 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -318,7 +318,7 @@
if (i2c->irq != 0)
if ((result = request_irq(i2c->irq, mpc_i2c_isr,
- SA_SHIRQ, "i2c-mpc", i2c)) < 0) {
+ IRQF_SHARED, "i2c-mpc", i2c)) < 0) {
printk(KERN_ERR
"i2c-mpc - failed to attach interrupt\n");
goto fail_irq;
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 5155010..ee114b4 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -968,7 +968,7 @@
#endif
pxa_set_cken(CKEN14_I2C, 1);
- ret = request_irq(IRQ_I2C, i2c_pxa_handler, SA_INTERRUPT,
+ ret = request_irq(IRQ_I2C, i2c_pxa_handler, IRQF_DISABLED,
"pxa2xx-i2c", i2c);
if (ret)
goto out;
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 512b879..5d2950e 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -828,7 +828,7 @@
goto out;
}
- ret = request_irq(res->start, s3c24xx_i2c_irq, SA_INTERRUPT,
+ ret = request_irq(res->start, s3c24xx_i2c_irq, IRQF_DISABLED,
pdev->name, i2c);
if (ret != 0) {
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index b638ac6..f92505b 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -908,7 +908,7 @@
if (otg_dev)
status = request_irq(otg_dev->resource[1].start, omap_otg_irq,
- SA_INTERRUPT, DRIVER_NAME, isp);
+ IRQF_DISABLED, DRIVER_NAME, isp);
else
status = -ENODEV;
@@ -1578,7 +1578,7 @@
}
status = request_irq(isp->irq, isp1301_irq,
- SA_SAMPLE_RANDOM, DRIVER_NAME, isp);
+ IRQF_SAMPLE_RANDOM, DRIVER_NAME, isp);
if (status < 0) {
dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n",
isp->irq, status);
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index e27ee12..e7e2704 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -521,14 +521,14 @@
}
#ifdef CONFIG_ARM
- irqflags = SA_SAMPLE_RANDOM | SA_TRIGGER_LOW;
+ irqflags = IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_LOW;
if (machine_is_omap_h2()) {
tps->model = TPS65010;
omap_cfg_reg(W4_GPIO58);
tps->irq = OMAP_GPIO_IRQ(58);
omap_request_gpio(58);
omap_set_gpio_direction(58, 1);
- irqflags |= SA_TRIGGER_FALLING;
+ irqflags |= IRQF_TRIGGER_FALLING;
}
if (machine_is_omap_osk()) {
tps->model = TPS65010;
@@ -536,7 +536,7 @@
tps->irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1));
omap_request_gpio(OMAP_MPUIO(1));
omap_set_gpio_direction(OMAP_MPUIO(1), 1);
- irqflags |= SA_TRIGGER_FALLING;
+ irqflags |= IRQF_TRIGGER_FALLING;
}
if (machine_is_omap_h3()) {
tps->model = TPS65013;
@@ -544,7 +544,7 @@
// FIXME set up this board's IRQ ...
}
#else
- irqflags = SA_SAMPLE_RANDOM;
+ irqflags = IRQF_SAMPLE_RANDOM;
#endif
if (tps->irq > 0) {
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index c5f71ac..9cadf01 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1004,7 +1004,7 @@
* and irq serialization situations. This is somewhat complex because
* it handles static as well as dynamic (PCMCIA) IDE interfaces.
*
- * The SA_INTERRUPT in sa_flags means ide_intr() is always entered with
+ * The IRQF_DISABLED in sa_flags means ide_intr() is always entered with
* interrupts completely disabled. This can be bad for interrupt latency,
* but anything else has led to problems on some machines. We re-enable
* interrupts as much as we can safely do in most places.
@@ -1090,15 +1090,15 @@
* Allocate the irq, if not already obtained for another hwif
*/
if (!match || match->irq != hwif->irq) {
- int sa = SA_INTERRUPT;
+ int sa = IRQF_DISABLED;
#if defined(__mc68000__) || defined(CONFIG_APUS)
- sa = SA_SHIRQ;
+ sa = IRQF_SHARED;
#endif /* __mc68000__ || CONFIG_APUS */
if (IDE_CHIPSET_IS_PCI(hwif->chipset)) {
- sa = SA_SHIRQ;
+ sa = IRQF_SHARED;
#ifndef CONFIG_IDEPCI_SHARE_IRQ
- sa |= SA_INTERRUPT;
+ sa |= IRQF_DISABLED;
#endif /* CONFIG_IDEPCI_SHARE_IRQ */
}
diff --git a/drivers/ide/legacy/hd.c b/drivers/ide/legacy/hd.c
index 6439dec6..aebecd8 100644
--- a/drivers/ide/legacy/hd.c
+++ b/drivers/ide/legacy/hd.c
@@ -691,7 +691,7 @@
};
/*
- * This is the hard disk IRQ description. The SA_INTERRUPT in sa_flags
+ * This is the hard disk IRQ description. The IRQF_DISABLED in sa_flags
* means we run the IRQ-handler with interrupts disabled: this is bad for
* interrupt latency, but anything else has led to problems on some
* machines.
@@ -806,7 +806,7 @@
p->cyl, p->head, p->sect);
}
- if (request_irq(HD_IRQ, hd_interrupt, SA_INTERRUPT, "hd", NULL)) {
+ if (request_irq(HD_IRQ, hd_interrupt, IRQF_DISABLED, "hd", NULL)) {
printk("hd: unable to get IRQ%d for the hard disk driver\n",
HD_IRQ);
goto out1;
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 7fb3635..3cb0442 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -650,6 +650,8 @@
}
ide_set_hwifdata(hwif, idev);
+ hwif->atapi_dma = 1;
+
pci_read_config_byte(hwif->pci_dev, 0x50, &conf);
if(conf & 1) {
idev->smart = 1;
diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index 8de81ec..d4bad67 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -3392,12 +3392,12 @@
spin_lock_init(&ohci->event_lock);
/*
- * interrupts are disabled, all right, but... due to SA_SHIRQ we
+ * interrupts are disabled, all right, but... due to IRQF_SHARED we
* might get called anyway. We'll see no event, of course, but
* we need to get to that "no event", so enough should be initialized
* by that point.
*/
- if (request_irq(dev->irq, ohci_irq_handler, SA_SHIRQ,
+ if (request_irq(dev->irq, ohci_irq_handler, IRQF_SHARED,
OHCI1394_DRIVER_NAME, ohci))
FAIL(-ENOMEM, "Failed to allocate shared interrupt %d", dev->irq);
diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index 5b48f6a..e6f4123 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -1253,7 +1253,7 @@
sprintf (irq_buf, "%d", dev->irq);
- if (!request_irq(dev->irq, lynx_irq_handler, SA_SHIRQ,
+ if (!request_irq(dev->irq, lynx_irq_handler, IRQF_SHARED,
PCILYNX_DRIVER_NAME, lynx)) {
PRINT(KERN_INFO, lynx->id, "allocated interrupt %s", irq_buf);
lynx->state = have_intr;
diff --git a/drivers/infiniband/hw/ipath/Kconfig b/drivers/infiniband/hw/ipath/Kconfig
index 9ea67c4..1db9489 100644
--- a/drivers/infiniband/hw/ipath/Kconfig
+++ b/drivers/infiniband/hw/ipath/Kconfig
@@ -1,16 +1,16 @@
config IPATH_CORE
- tristate "PathScale InfiniPath Driver"
+ tristate "QLogic InfiniPath Driver"
depends on 64BIT && PCI_MSI && NET
---help---
- This is a low-level driver for PathScale InfiniPath host channel
+ This is a low-level driver for QLogic InfiniPath host channel
adapters (HCAs) based on the HT-400 and PE-800 chips.
config INFINIBAND_IPATH
- tristate "PathScale InfiniPath Verbs Driver"
+ tristate "QLogic InfiniPath Verbs Driver"
depends on IPATH_CORE && INFINIBAND
---help---
This is a driver that provides InfiniBand verbs support for
- PathScale InfiniPath host channel adapters (HCAs). This
+ QLogic InfiniPath host channel adapters (HCAs). This
allows these devices to be used with both kernel upper level
protocols such as IP-over-InfiniBand as well as with userspace
applications (in conjunction with InfiniBand userspace access).
diff --git a/drivers/infiniband/hw/ipath/Makefile b/drivers/infiniband/hw/ipath/Makefile
index b4d084a..b0bf728 100644
--- a/drivers/infiniband/hw/ipath/Makefile
+++ b/drivers/infiniband/hw/ipath/Makefile
@@ -1,4 +1,4 @@
-EXTRA_CFLAGS += -DIPATH_IDSTR='"PathScale kernel.org driver"' \
+EXTRA_CFLAGS += -DIPATH_IDSTR='"QLogic kernel.org driver"' \
-DIPATH_KERN_TYPE=0
obj-$(CONFIG_IPATH_CORE) += ipath_core.o
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 48a5524..062bd39 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -38,7 +39,8 @@
* to communicate between kernel and user code.
*/
-/* This is the IEEE-assigned OUI for PathScale, Inc. */
+
+/* This is the IEEE-assigned OUI for QLogic Inc. InfiniPath */
#define IPATH_SRC_OUI_1 0x00
#define IPATH_SRC_OUI_2 0x11
#define IPATH_SRC_OUI_3 0x75
@@ -96,8 +98,8 @@
__u64 sps_hwerrs;
/* number of times IB link changed state unexpectedly */
__u64 sps_iblink;
- /* no longer used; left for compatibility */
- __u64 sps_unused3;
+ /* kernel receive interrupts that didn't read intstat */
+ __u64 sps_fastrcvint;
/* number of kernel (port0) packets received */
__u64 sps_port0pkts;
/* number of "ethernet" packets sent by driver */
@@ -121,8 +123,7 @@
__u64 sps_ports;
/* list of pkeys (other than default) accepted (0 means not set) */
__u16 sps_pkeys[4];
- /* lids for up to 4 infinipaths, indexed by infinipath # */
- __u16 sps_lid[4];
+ __u16 sps_unused16[4]; /* available; maintaining compatible layout */
/* number of user ports per chip (not IB ports) */
__u32 sps_nports;
/* not our interrupt, or already handled */
@@ -140,10 +141,8 @@
* packets if ipath not configured, sma/mad, etc.)
*/
__u64 sps_krdrops;
- /* mlids for up to 4 infinipaths, indexed by infinipath # */
- __u16 sps_mlid[4];
/* pad for future growth */
- __u64 __sps_pad[45];
+ __u64 __sps_pad[46];
};
/*
@@ -310,6 +309,9 @@
__u32 spi_rcv_egrchunksize;
/* total size of mmap to cover full rcvegrbuffers */
__u32 spi_rcv_egrbuftotlen;
+ __u32 spi_filler_for_align;
+ /* address of readonly memory copy of the rcvhdrq tail register. */
+ __u64 spi_rcvhdr_tailaddr;
} __attribute__ ((aligned(8)));
@@ -342,9 +344,9 @@
/*
* Similarly, this is the kernel version going back to the user. It's
* slightly different, in that we want to tell if the driver was built as
- * part of a PathScale release, or from the driver from OpenIB, kernel.org,
- * or a standard distribution, for support reasons. The high bit is 0 for
- * non-PathScale, and 1 for PathScale-built/supplied.
+ * part of a QLogic release, or from the driver from openfabrics.org,
+ * kernel.org, or a standard distribution, for support reasons.
+ * The high bit is 0 for non-QLogic and 1 for QLogic-built/supplied.
*
* It's returned by the driver to the user code during initialization in the
* spi_sw_version field of ipath_base_info, so the user code can in turn
@@ -379,13 +381,7 @@
*/
__u32 spu_rcvhdrsize;
- /*
- * cache line aligned (64 byte) user address to
- * which the rcvhdrtail register will be written by infinipath
- * whenever it changes, so that no chip registers are read in
- * the performance path.
- */
- __u64 spu_rcvhdraddr;
+ __u64 spu_unused; /* kept for compatible layout */
/*
* address of struct base_info to write to
@@ -481,7 +477,7 @@
* Data layout in I2C flash (for GUID, etc.)
* All fields are little-endian binary unless otherwise stated
*/
-#define IPATH_FLASH_VERSION 1
+#define IPATH_FLASH_VERSION 2
struct ipath_flash {
/* flash layout version (IPATH_FLASH_VERSION) */
__u8 if_fversion;
@@ -489,14 +485,14 @@
__u8 if_csum;
/*
* valid length (in use, protected by if_csum), including
- * if_fversion and if_sum themselves)
+ * if_fversion and if_csum themselves)
*/
__u8 if_length;
/* the GUID, in network order */
__u8 if_guid[8];
/* number of GUIDs to use, starting from if_guid */
__u8 if_numguid;
- /* the board serial number, in ASCII */
+ /* the (last 10 characters of) board serial number, in ASCII */
char if_serial[12];
/* board mfg date (YYYYMMDD ASCII) */
char if_mfgdate[8];
@@ -508,8 +504,10 @@
__u8 if_powerhour[2];
/* ASCII free-form comment field */
char if_comment[32];
- /* 78 bytes used, min flash size is 128 bytes */
- __u8 if_future[50];
+ /* Backwards compatible prefix for longer QLogic Serial Numbers */
+ char if_sprefix[4];
+ /* 82 bytes used, min flash size is 128 bytes */
+ __u8 if_future[46];
};
/*
@@ -603,14 +601,118 @@
#define INFINIPATH_KPF_INTR 0x1
/* SendPIO per-buffer control */
-#define INFINIPATH_SP_LENGTHP1_MASK 0x3FF
-#define INFINIPATH_SP_LENGTHP1_SHIFT 0
-#define INFINIPATH_SP_INTR 0x80000000
-#define INFINIPATH_SP_TEST 0x40000000
-#define INFINIPATH_SP_TESTEBP 0x20000000
+#define INFINIPATH_SP_TEST 0x40
+#define INFINIPATH_SP_TESTEBP 0x20
/* SendPIOAvail bits */
#define INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT 1
#define INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT 0
+/* infinipath header format */
+struct ipath_header {
+ /*
+ * Version - 4 bits, Port - 4 bits, TID - 10 bits and Offset -
+ * 14 bits before ECO change ~28 Dec 03. After that, Vers 4,
+ * Port 3, TID 11, offset 14.
+ */
+ __le32 ver_port_tid_offset;
+ __le16 chksum;
+ __le16 pkt_flags;
+};
+
+/* infinipath user message header format.
+ * This structure contains the first 4 fields common to all protocols
+ * that employ infinipath.
+ */
+struct ipath_message_header {
+ __be16 lrh[4];
+ __be32 bth[3];
+ /* fields below this point are in host byte order */
+ struct ipath_header iph;
+ __u8 sub_opcode;
+};
+
+/* infinipath ethernet header format */
+struct ether_header {
+ __be16 lrh[4];
+ __be32 bth[3];
+ struct ipath_header iph;
+ __u8 sub_opcode;
+ __u8 cmd;
+ __be16 lid;
+ __u16 mac[3];
+ __u8 frag_num;
+ __u8 seq_num;
+ __le32 len;
+ /* MUST be of word size due to PIO write requirements */
+ __le32 csum;
+ __le16 csum_offset;
+ __le16 flags;
+ __u16 first_2_bytes;
+ __u8 unused[2]; /* currently unused */
+};
+
+
+/* IB - LRH header consts */
+#define IPATH_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */
+#define IPATH_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */
+
+/* misc. */
+#define SIZE_OF_CRC 1
+
+#define IPATH_DEFAULT_P_KEY 0xFFFF
+#define IPATH_PERMISSIVE_LID 0xFFFF
+#define IPATH_AETH_CREDIT_SHIFT 24
+#define IPATH_AETH_CREDIT_MASK 0x1F
+#define IPATH_AETH_CREDIT_INVAL 0x1F
+#define IPATH_PSN_MASK 0xFFFFFF
+#define IPATH_MSN_MASK 0xFFFFFF
+#define IPATH_QPN_MASK 0xFFFFFF
+#define IPATH_MULTICAST_LID_BASE 0xC000
+#define IPATH_MULTICAST_QPN 0xFFFFFF
+
+/* Receive Header Queue: receive type (from infinipath) */
+#define RCVHQ_RCV_TYPE_EXPECTED 0
+#define RCVHQ_RCV_TYPE_EAGER 1
+#define RCVHQ_RCV_TYPE_NON_KD 2
+#define RCVHQ_RCV_TYPE_ERROR 3
+
+
+/* sub OpCodes - ith4x */
+#define IPATH_ITH4X_OPCODE_ENCAP 0x81
+#define IPATH_ITH4X_OPCODE_LID_ARP 0x82
+
+#define IPATH_HEADER_QUEUE_WORDS 9
+
+/* functions for extracting fields from rcvhdrq entries for the driver.
+ */
+static inline __u32 ipath_hdrget_err_flags(const __le32 * rbuf)
+{
+ return __le32_to_cpu(rbuf[1]);
+}
+
+static inline __u32 ipath_hdrget_rcv_type(const __le32 * rbuf)
+{
+ return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_RCVTYPE_SHIFT)
+ & INFINIPATH_RHF_RCVTYPE_MASK;
+}
+
+static inline __u32 ipath_hdrget_length_in_bytes(const __le32 * rbuf)
+{
+ return ((__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_LENGTH_SHIFT)
+ & INFINIPATH_RHF_LENGTH_MASK) << 2;
+}
+
+static inline __u32 ipath_hdrget_index(const __le32 * rbuf)
+{
+ return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_EGRINDEX_SHIFT)
+ & INFINIPATH_RHF_EGRINDEX_MASK;
+}
+
+static inline __u32 ipath_hdrget_ipath_ver(__le32 hdrword)
+{
+ return (__le32_to_cpu(hdrword) >> INFINIPATH_I_VERS_SHIFT)
+ & INFINIPATH_I_VERS_MASK;
+}
+
#endif /* _IPATH_COMMON_H */
diff --git a/drivers/infiniband/hw/ipath/ipath_cq.c b/drivers/infiniband/hw/ipath/ipath_cq.c
index 7ece113..3efee34 100644
--- a/drivers/infiniband/hw/ipath/ipath_cq.c
+++ b/drivers/infiniband/hw/ipath/ipath_cq.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -157,10 +158,21 @@
struct ib_ucontext *context,
struct ib_udata *udata)
{
+ struct ipath_ibdev *dev = to_idev(ibdev);
struct ipath_cq *cq;
struct ib_wc *wc;
struct ib_cq *ret;
+ if (entries > ib_ipath_max_cqes) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+
+ if (dev->n_cqs_allocated == ib_ipath_max_cqs) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
+
/*
* Need to use vmalloc() if we want to support large #s of
* entries.
@@ -196,6 +208,8 @@
ret = &cq->ibcq;
+ dev->n_cqs_allocated++;
+
bail:
return ret;
}
@@ -210,9 +224,11 @@
*/
int ipath_destroy_cq(struct ib_cq *ibcq)
{
+ struct ipath_ibdev *dev = to_idev(ibcq->device);
struct ipath_cq *cq = to_icq(ibcq);
tasklet_kill(&cq->comptask);
+ dev->n_cqs_allocated--;
vfree(cq->queue);
kfree(cq);
diff --git a/drivers/infiniband/hw/ipath/ipath_debug.h b/drivers/infiniband/hw/ipath/ipath_debug.h
index 4676238..f415bed 100644
--- a/drivers/infiniband/hw/ipath/ipath_debug.h
+++ b/drivers/infiniband/hw/ipath/ipath_debug.h
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
diff --git a/drivers/infiniband/hw/ipath/ipath_diag.c b/drivers/infiniband/hw/ipath/ipath_diag.c
index 28ddceb..147dd89 100644
--- a/drivers/infiniband/hw/ipath/ipath_diag.c
+++ b/drivers/infiniband/hw/ipath/ipath_diag.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -43,10 +44,9 @@
#include <linux/pci.h>
#include <asm/uaccess.h>
-#include "ipath_common.h"
#include "ipath_kernel.h"
-#include "ips_common.h"
#include "ipath_layer.h"
+#include "ipath_common.h"
int ipath_diag_inuse;
static int diag_set_link;
@@ -66,18 +66,20 @@
.release = ipath_diag_release
};
-static struct cdev *diag_cdev;
-static struct class_device *diag_class_dev;
-
-int ipath_diag_init(void)
+int ipath_diag_add(struct ipath_devdata *dd)
{
- return ipath_cdev_init(IPATH_DIAG_MINOR, "ipath_diag",
- &diag_file_ops, &diag_cdev, &diag_class_dev);
+ char name[16];
+
+ snprintf(name, sizeof(name), "ipath_diag%d", dd->ipath_unit);
+
+ return ipath_cdev_init(IPATH_DIAG_MINOR_BASE + dd->ipath_unit, name,
+ &diag_file_ops, &dd->diag_cdev,
+ &dd->diag_class_dev);
}
-void ipath_diag_cleanup(void)
+void ipath_diag_remove(struct ipath_devdata *dd)
{
- ipath_cdev_cleanup(&diag_cdev, &diag_class_dev);
+ ipath_cdev_cleanup(&dd->diag_cdev, &dd->diag_class_dev);
}
/**
@@ -101,8 +103,7 @@
int ret;
/* not very efficient, but it works for now */
- if (reg_addr < dd->ipath_kregbase ||
- reg_end > dd->ipath_kregend) {
+ if (reg_addr < dd->ipath_kregbase || reg_end > dd->ipath_kregend) {
ret = -EINVAL;
goto bail;
}
@@ -113,7 +114,7 @@
goto bail;
}
reg_addr++;
- uaddr++;
+ uaddr += sizeof(u64);
}
ret = 0;
bail:
@@ -139,8 +140,7 @@
int ret;
/* not very efficient, but it works for now */
- if (reg_addr < dd->ipath_kregbase ||
- reg_end > dd->ipath_kregend) {
+ if (reg_addr < dd->ipath_kregbase || reg_end > dd->ipath_kregend) {
ret = -EINVAL;
goto bail;
}
@@ -153,7 +153,7 @@
writeq(data, reg_addr);
reg_addr++;
- uaddr++;
+ uaddr += sizeof(u64);
}
ret = 0;
bail:
@@ -191,7 +191,8 @@
}
reg_addr++;
- uaddr++;
+ uaddr += sizeof(u32);
+
}
ret = 0;
bail:
@@ -230,7 +231,7 @@
writel(data, reg_addr);
reg_addr++;
- uaddr++;
+ uaddr += sizeof(u32);
}
ret = 0;
bail:
@@ -239,59 +240,45 @@
static int ipath_diag_open(struct inode *in, struct file *fp)
{
+ int unit = iminor(in) - IPATH_DIAG_MINOR_BASE;
struct ipath_devdata *dd;
- int unit = 0; /* XXX this is bogus */
- unsigned long flags;
int ret;
- dd = ipath_lookup(unit);
-
mutex_lock(&ipath_mutex);
- spin_lock_irqsave(&ipath_devs_lock, flags);
if (ipath_diag_inuse) {
ret = -EBUSY;
goto bail;
}
- list_for_each_entry(dd, &ipath_dev_list, ipath_list) {
- /*
- * we need at least one infinipath device to be present
- * (don't use INITTED, because we want to be able to open
- * even if device is in freeze mode, which cleared INITTED).
- * There is a small amount of risk to this, which is why we
- * also verify kregbase is set.
- */
+ dd = ipath_lookup(unit);
- if (!(dd->ipath_flags & IPATH_PRESENT) ||
- !dd->ipath_kregbase)
- continue;
-
- ipath_diag_inuse = 1;
- diag_set_link = 0;
- ret = 0;
+ if (dd == NULL || !(dd->ipath_flags & IPATH_PRESENT) ||
+ !dd->ipath_kregbase) {
+ ret = -ENODEV;
goto bail;
}
- ret = -ENODEV;
-
-bail:
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
+ fp->private_data = dd;
+ ipath_diag_inuse = 1;
+ diag_set_link = 0;
+ ret = 0;
/* Only expose a way to reset the device if we
make it into diag mode. */
- if (ret == 0)
- ipath_expose_reset(&dd->pcidev->dev);
+ ipath_expose_reset(&dd->pcidev->dev);
+bail:
mutex_unlock(&ipath_mutex);
return ret;
}
-static int ipath_diag_release(struct inode *i, struct file *f)
+static int ipath_diag_release(struct inode *in, struct file *fp)
{
mutex_lock(&ipath_mutex);
ipath_diag_inuse = 0;
+ fp->private_data = NULL;
mutex_unlock(&ipath_mutex);
return 0;
}
@@ -299,17 +286,10 @@
static ssize_t ipath_diag_read(struct file *fp, char __user *data,
size_t count, loff_t *off)
{
- int unit = 0; /* XXX provide for reads on other units some day */
- struct ipath_devdata *dd;
+ struct ipath_devdata *dd = fp->private_data;
void __iomem *kreg_base;
ssize_t ret;
- dd = ipath_lookup(unit);
- if (!dd) {
- ret = -ENODEV;
- goto bail;
- }
-
kreg_base = dd->ipath_kregbase;
if (count == 0)
@@ -328,23 +308,16 @@
ret = count;
}
-bail:
return ret;
}
static ssize_t ipath_diag_write(struct file *fp, const char __user *data,
size_t count, loff_t *off)
{
- int unit = 0; /* XXX this is bogus */
- struct ipath_devdata *dd;
+ struct ipath_devdata *dd = fp->private_data;
void __iomem *kreg_base;
ssize_t ret;
- dd = ipath_lookup(unit);
- if (!dd) {
- ret = -ENODEV;
- goto bail;
- }
kreg_base = dd->ipath_kregbase;
if (count == 0)
@@ -363,6 +336,5 @@
ret = count;
}
-bail:
return ret;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index e4b897f..823131d 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -38,8 +39,8 @@
#include <linux/vmalloc.h>
#include "ipath_kernel.h"
-#include "ips_common.h"
#include "ipath_layer.h"
+#include "ipath_common.h"
static void ipath_update_pio_bufs(struct ipath_devdata *);
@@ -52,7 +53,7 @@
EXPORT_SYMBOL_GPL(ipath_get_unit_name);
-#define DRIVER_LOAD_MSG "PathScale " IPATH_DRV_NAME " loaded: "
+#define DRIVER_LOAD_MSG "QLogic " IPATH_DRV_NAME " loaded: "
#define PFX IPATH_DRV_NAME ": "
/*
@@ -74,8 +75,8 @@
EXPORT_SYMBOL_GPL(ipath_debug);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("PathScale <support@pathscale.com>");
-MODULE_DESCRIPTION("Pathscale InfiniPath driver");
+MODULE_AUTHOR("QLogic <support@pathscale.com>");
+MODULE_DESCRIPTION("QLogic InfiniPath driver");
const char *ipath_ibcstatus_str[] = {
"Disabled",
@@ -130,14 +131,6 @@
.id_table = ipath_pci_tbl,
};
-/*
- * This is where port 0's rcvhdrtail register is written back; we also
- * want nothing else sharing the cache line, so make it a cache line
- * in size. Used for all units.
- */
-volatile __le64 *ipath_port0_rcvhdrtail;
-dma_addr_t ipath_port0_rcvhdrtail_dma;
-static int port0_rcvhdrtail_refs;
static inline void read_bars(struct ipath_devdata *dd, struct pci_dev *dev,
u32 *bar0, u32 *bar1)
@@ -170,14 +163,13 @@
list_del(&dd->ipath_list);
spin_unlock_irqrestore(&ipath_devs_lock, flags);
}
- dma_free_coherent(&pdev->dev, sizeof(*dd), dd, dd->ipath_dma_addr);
+ vfree(dd);
}
static struct ipath_devdata *ipath_alloc_devdata(struct pci_dev *pdev)
{
unsigned long flags;
struct ipath_devdata *dd;
- dma_addr_t dma_addr;
int ret;
if (!idr_pre_get(&unit_table, GFP_KERNEL)) {
@@ -185,15 +177,12 @@
goto bail;
}
- dd = dma_alloc_coherent(&pdev->dev, sizeof(*dd), &dma_addr,
- GFP_KERNEL);
-
+ dd = vmalloc(sizeof(*dd));
if (!dd) {
dd = ERR_PTR(-ENOMEM);
goto bail;
}
-
- dd->ipath_dma_addr = dma_addr;
+ memset(dd, 0, sizeof(*dd));
dd->ipath_unit = -1;
spin_lock_irqsave(&ipath_devs_lock, flags);
@@ -271,47 +260,6 @@
return nunits;
}
-static int init_port0_rcvhdrtail(struct pci_dev *pdev)
-{
- int ret;
-
- mutex_lock(&ipath_mutex);
-
- if (!ipath_port0_rcvhdrtail) {
- ipath_port0_rcvhdrtail =
- dma_alloc_coherent(&pdev->dev,
- IPATH_PORT0_RCVHDRTAIL_SIZE,
- &ipath_port0_rcvhdrtail_dma,
- GFP_KERNEL);
-
- if (!ipath_port0_rcvhdrtail) {
- ret = -ENOMEM;
- goto bail;
- }
- }
- port0_rcvhdrtail_refs++;
- ret = 0;
-
-bail:
- mutex_unlock(&ipath_mutex);
-
- return ret;
-}
-
-static void cleanup_port0_rcvhdrtail(struct pci_dev *pdev)
-{
- mutex_lock(&ipath_mutex);
-
- if (!--port0_rcvhdrtail_refs) {
- dma_free_coherent(&pdev->dev, IPATH_PORT0_RCVHDRTAIL_SIZE,
- (void *) ipath_port0_rcvhdrtail,
- ipath_port0_rcvhdrtail_dma);
- ipath_port0_rcvhdrtail = NULL;
- }
-
- mutex_unlock(&ipath_mutex);
-}
-
/*
* These next two routines are placeholders in case we don't have per-arch
* code for controlling write combining. If explicit control of write
@@ -336,20 +284,12 @@
u32 bar0 = 0, bar1 = 0;
u8 rev;
- ret = init_port0_rcvhdrtail(pdev);
- if (ret < 0) {
- printk(KERN_ERR IPATH_DRV_NAME
- ": Could not allocate port0_rcvhdrtail: error %d\n",
- -ret);
- goto bail;
- }
-
dd = ipath_alloc_devdata(pdev);
if (IS_ERR(dd)) {
ret = PTR_ERR(dd);
printk(KERN_ERR IPATH_DRV_NAME
": Could not allocate devdata: error %d\n", -ret);
- goto bail_rcvhdrtail;
+ goto bail;
}
ipath_cdbg(VERBOSE, "initializing unit #%u\n", dd->ipath_unit);
@@ -424,12 +364,29 @@
*/
ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (ret) {
- dev_info(&pdev->dev, "pci_set_dma_mask unit %u "
- "fails: %d\n", dd->ipath_unit, ret);
+ dev_info(&pdev->dev,
+ "Unable to set DMA mask for unit %u: %d\n",
+ dd->ipath_unit, ret);
goto bail_regions;
}
- else
+ else {
ipath_dbg("No 64bit DMA mask, used 32 bit mask\n");
+ ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (ret)
+ dev_info(&pdev->dev,
+ "Unable to set DMA consistent mask "
+ "for unit %u: %d\n",
+ dd->ipath_unit, ret);
+
+ }
+ }
+ else {
+ ret = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+ if (ret)
+ dev_info(&pdev->dev,
+ "Unable to set DMA consistent mask "
+ "for unit %u: %d\n",
+ dd->ipath_unit, ret);
}
pci_set_master(pdev);
@@ -452,7 +409,7 @@
ipath_init_pe800_funcs(dd);
break;
default:
- ipath_dev_err(dd, "Found unknown PathScale deviceid 0x%x, "
+ ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, "
"failing\n", ent->device);
return -ENODEV;
}
@@ -495,23 +452,23 @@
((void __iomem *)dd->ipath_kregbase + len);
dd->ipath_physaddr = addr; /* used for io_remap, etc. */
/* for user mmap */
- dd->ipath_kregvirt = (u64 __iomem *) phys_to_virt(addr);
- ipath_cdbg(VERBOSE, "mapped io addr %llx to kregbase %p "
- "kregvirt %p\n", addr, dd->ipath_kregbase,
- dd->ipath_kregvirt);
+ ipath_cdbg(VERBOSE, "mapped io addr %llx to kregbase %p\n",
+ addr, dd->ipath_kregbase);
/*
* clear ipath_flags here instead of in ipath_init_chip as it is set
* by ipath_setup_htconfig.
*/
dd->ipath_flags = 0;
+ dd->ipath_lli_counter = 0;
+ dd->ipath_lli_errors = 0;
if (dd->ipath_f_bus(dd, pdev))
ipath_dev_err(dd, "Failed to setup config space; "
"continuing anyway\n");
/*
- * set up our interrupt handler; SA_SHIRQ probably not needed,
+ * set up our interrupt handler; IRQF_SHARED probably not needed,
* since MSI interrupts shouldn't be shared but won't hurt for now.
* check 0 irq after we return from chip-specific bus setup, since
* that can affect this due to setup
@@ -520,7 +477,7 @@
ipath_dev_err(dd, "irq is 0, BIOS error? Interrupts won't "
"work\n");
else {
- ret = request_irq(pdev->irq, ipath_intr, SA_SHIRQ,
+ ret = request_irq(pdev->irq, ipath_intr, IRQF_SHARED,
IPATH_DRV_NAME, dd);
if (ret) {
ipath_dev_err(dd, "Couldn't setup irq handler, "
@@ -545,6 +502,7 @@
ipath_device_create_group(&pdev->dev, dd);
ipathfs_add_device(dd);
ipath_user_add(dd);
+ ipath_diag_add(dd);
ipath_layer_add(dd);
goto bail;
@@ -561,9 +519,6 @@
bail_devdata:
ipath_free_devdata(pdev, dd);
-bail_rcvhdrtail:
- cleanup_port0_rcvhdrtail(pdev);
-
bail:
return ret;
}
@@ -577,8 +532,9 @@
return;
dd = pci_get_drvdata(pdev);
- ipath_layer_del(dd);
- ipath_user_del(dd);
+ ipath_layer_remove(dd);
+ ipath_diag_remove(dd);
+ ipath_user_remove(dd);
ipathfs_remove_device(dd);
ipath_device_remove_group(&pdev->dev, dd);
ipath_cdbg(VERBOSE, "Releasing pci memory regions, dd %p, "
@@ -594,7 +550,6 @@
pci_disable_device(pdev);
ipath_free_devdata(pdev, dd);
- cleanup_port0_rcvhdrtail(pdev);
}
/* general driver use */
@@ -868,7 +823,8 @@
u8 pad, *bthbytes;
struct sk_buff *skb, *nskb;
- if (dd->ipath_port0_skbs && hdr->sub_opcode == OPCODE_ENCAP) {
+ if (dd->ipath_port0_skbs &&
+ hdr->sub_opcode == IPATH_ITH4X_OPCODE_ENCAP) {
/*
* Allocate a new sk_buff to replace the one we give
* to the network stack.
@@ -899,7 +855,7 @@
/* another ether packet received */
ipath_stats.sps_ether_rpkts++;
}
- else if (hdr->sub_opcode == OPCODE_LID_ARP)
+ else if (hdr->sub_opcode == IPATH_ITH4X_OPCODE_LID_ARP)
__ipath_layer_rcv_lid(dd, hdr);
}
@@ -916,8 +872,8 @@
const u32 rsize = dd->ipath_rcvhdrentsize; /* words */
const u32 maxcnt = dd->ipath_rcvhdrcnt * rsize; /* words */
u32 etail = -1, l, hdrqtail;
- struct ips_message_header *hdr;
- u32 eflags, i, etype, tlen, pkttot = 0;
+ struct ipath_message_header *hdr;
+ u32 eflags, i, etype, tlen, pkttot = 0, updegr=0, reloop=0;
static u64 totcalls; /* stats, may eventually remove */
char emsg[128];
@@ -931,24 +887,18 @@
if (test_and_set_bit(0, &dd->ipath_rcv_pending))
goto bail;
- if (dd->ipath_port0head ==
- (u32)le64_to_cpu(*dd->ipath_hdrqtailptr))
+ l = dd->ipath_port0head;
+ hdrqtail = (u32) le64_to_cpu(*dd->ipath_hdrqtailptr);
+ if (l == hdrqtail)
goto done;
-gotmore:
- /*
- * read only once at start. If in flood situation, this helps
- * performance slightly. If more arrive while we are processing,
- * we'll come back here and do them
- */
- hdrqtail = (u32)le64_to_cpu(*dd->ipath_hdrqtailptr);
-
- for (i = 0, l = dd->ipath_port0head; l != hdrqtail; i++) {
+reloop:
+ for (i = 0; l != hdrqtail; i++) {
u32 qp;
u8 *bthbytes;
rc = (u64 *) (dd->ipath_pd[0]->port_rcvhdrq + (l << 2));
- hdr = (struct ips_message_header *)&rc[1];
+ hdr = (struct ipath_message_header *)&rc[1];
/*
* could make a network order version of IPATH_KD_QP, and
* do the obvious shift before masking to speed this up.
@@ -956,10 +906,10 @@
qp = ntohl(hdr->bth[1]) & 0xffffff;
bthbytes = (u8 *) hdr->bth;
- eflags = ips_get_hdr_err_flags((__le32 *) rc);
- etype = ips_get_rcv_type((__le32 *) rc);
+ eflags = ipath_hdrget_err_flags((__le32 *) rc);
+ etype = ipath_hdrget_rcv_type((__le32 *) rc);
/* total length */
- tlen = ips_get_length_in_bytes((__le32 *) rc);
+ tlen = ipath_hdrget_length_in_bytes((__le32 *) rc);
ebuf = NULL;
if (etype != RCVHQ_RCV_TYPE_EXPECTED) {
/*
@@ -969,7 +919,7 @@
* set ebuf (so we try to copy data) unless the
* length requires it.
*/
- etail = ips_get_index((__le32 *) rc);
+ etail = ipath_hdrget_index((__le32 *) rc);
if (tlen > sizeof(*hdr) ||
etype == RCVHQ_RCV_TYPE_NON_KD)
ebuf = ipath_get_egrbuf(dd, etail, 0);
@@ -981,7 +931,7 @@
*/
if (etype != RCVHQ_RCV_TYPE_NON_KD && etype !=
- RCVHQ_RCV_TYPE_ERROR && ips_get_ipath_ver(
+ RCVHQ_RCV_TYPE_ERROR && ipath_hdrget_ipath_ver(
hdr->iph.ver_port_tid_offset) !=
IPS_PROTO_VERSION) {
ipath_cdbg(PKT, "Bad InfiniPath protocol version "
@@ -994,7 +944,19 @@
ipath_cdbg(PKT, "RHFerrs %x hdrqtail=%x typ=%u "
"tlen=%x opcode=%x egridx=%x: %s\n",
eflags, l, etype, tlen, bthbytes[0],
- ips_get_index((__le32 *) rc), emsg);
+ ipath_hdrget_index((__le32 *) rc), emsg);
+ /* Count local link integrity errors. */
+ if (eflags & (INFINIPATH_RHF_H_ICRCERR |
+ INFINIPATH_RHF_H_VCRCERR)) {
+ u8 n = (dd->ipath_ibcctrl >>
+ INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) &
+ INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK;
+
+ if (++dd->ipath_lli_counter > n) {
+ dd->ipath_lli_counter = 0;
+ dd->ipath_lli_errors++;
+ }
+ }
} else if (etype == RCVHQ_RCV_TYPE_NON_KD) {
int ret = __ipath_verbs_rcv(dd, rc + 1,
ebuf, tlen);
@@ -1002,6 +964,9 @@
ipath_cdbg(VERBOSE,
"received IB packet, "
"not SMA (QP=%x)\n", qp);
+ if (dd->ipath_lli_counter)
+ dd->ipath_lli_counter--;
+
} else if (etype == RCVHQ_RCV_TYPE_EAGER) {
if (qp == IPATH_KD_QP &&
bthbytes[0] == ipath_layer_rcv_opcode &&
@@ -1054,25 +1019,49 @@
l += rsize;
if (l >= maxcnt)
l = 0;
- /*
- * update for each packet, to help prevent overflows if we
- * have lots of packets.
- */
- (void)ipath_write_ureg(dd, ur_rcvhdrhead,
- dd->ipath_rhdrhead_intr_off | l, 0);
if (etype != RCVHQ_RCV_TYPE_EXPECTED)
- (void)ipath_write_ureg(dd, ur_rcvegrindexhead,
- etail, 0);
+ updegr = 1;
+ /*
+ * update head regs on last packet, and every 16 packets.
+ * Reduce bus traffic, while still trying to prevent
+ * rcvhdrq overflows, for when the queue is nearly full
+ */
+ if (l == hdrqtail || (i && !(i&0xf))) {
+ u64 lval;
+ if (l == hdrqtail) /* PE-800 interrupt only on last */
+ lval = dd->ipath_rhdrhead_intr_off | l;
+ else
+ lval = l;
+ (void)ipath_write_ureg(dd, ur_rcvhdrhead, lval, 0);
+ if (updegr) {
+ (void)ipath_write_ureg(dd, ur_rcvegrindexhead,
+ etail, 0);
+ updegr = 0;
+ }
+ }
+ }
+
+ if (!dd->ipath_rhdrhead_intr_off && !reloop) {
+ /* HT-400 workaround; we can have a race clearing chip
+ * interrupt with another interrupt about to be delivered,
+ * and can clear it before it is delivered on the GPIO
+ * workaround. By doing the extra check here for the
+ * in-memory tail register updating while we were doing
+ * earlier packets, we "almost" guarantee we have covered
+ * that case.
+ */
+ u32 hqtail = (u32)le64_to_cpu(*dd->ipath_hdrqtailptr);
+ if (hqtail != hdrqtail) {
+ hdrqtail = hqtail;
+ reloop = 1; /* loop 1 extra time at most */
+ goto reloop;
+ }
}
pkttot += i;
dd->ipath_port0head = l;
- if (hdrqtail != (u32)le64_to_cpu(*dd->ipath_hdrqtailptr))
- /* more arrived while we handled first batch */
- goto gotmore;
-
if (pkttot > ipath_stats.sps_maxpkts_call)
ipath_stats.sps_maxpkts_call = pkttot;
ipath_stats.sps_port0pkts += pkttot;
@@ -1369,26 +1358,20 @@
* @dd: the infinipath device
* @pd: the port data
*
- * this *must* be physically contiguous memory, and for now,
- * that limits it to what kmalloc can do.
+ * this must be contiguous memory (from an i/o perspective), and must be
+ * DMA'able (which means for some systems, it will go through an IOMMU,
+ * or be forced into a low address range).
*/
int ipath_create_rcvhdrq(struct ipath_devdata *dd,
struct ipath_portdata *pd)
{
- int ret = 0, amt;
+ int ret = 0;
- amt = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize *
- sizeof(u32), PAGE_SIZE);
if (!pd->port_rcvhdrq) {
- /*
- * not using REPEAT isn't viable; at 128KB, we can easily
- * fail this. The problem with REPEAT is we can block here
- * "forever". There isn't an inbetween, unfortunately. We
- * could reduce the risk by never freeing the rcvhdrq except
- * at unload, but even then, the first time a port is used,
- * we could delay for some time...
- */
+ dma_addr_t phys_hdrqtail;
gfp_t gfp_flags = GFP_USER | __GFP_COMP;
+ int amt = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize *
+ sizeof(u32), PAGE_SIZE);
pd->port_rcvhdrq = dma_alloc_coherent(
&dd->pcidev->dev, amt, &pd->port_rcvhdrq_phys,
@@ -1401,6 +1384,16 @@
ret = -ENOMEM;
goto bail;
}
+ pd->port_rcvhdrtail_kvaddr = dma_alloc_coherent(
+ &dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail, GFP_KERNEL);
+ if (!pd->port_rcvhdrtail_kvaddr) {
+ ipath_dev_err(dd, "attempt to allocate 1 page "
+ "for port %u rcvhdrqtailaddr failed\n",
+ pd->port_port);
+ ret = -ENOMEM;
+ goto bail;
+ }
+ pd->port_rcvhdrqtailaddr_phys = phys_hdrqtail;
pd->port_rcvhdrq_size = amt;
@@ -1410,20 +1403,28 @@
(unsigned long) pd->port_rcvhdrq_phys,
(unsigned long) pd->port_rcvhdrq_size,
pd->port_port);
- } else {
- /*
- * clear for security, sanity, and/or debugging, each
- * time we reuse
- */
- memset(pd->port_rcvhdrq, 0, amt);
+
+ ipath_cdbg(VERBOSE, "port %d hdrtailaddr, %llx physical\n",
+ pd->port_port,
+ (unsigned long long) phys_hdrqtail);
}
+ else
+ ipath_cdbg(VERBOSE, "reuse port %d rcvhdrq @%p %llx phys; "
+ "hdrtailaddr@%p %llx physical\n",
+ pd->port_port, pd->port_rcvhdrq,
+ pd->port_rcvhdrq_phys, pd->port_rcvhdrtail_kvaddr,
+ (unsigned long long)pd->port_rcvhdrqtailaddr_phys);
+
+ /* clear for security and sanity on each use */
+ memset(pd->port_rcvhdrq, 0, pd->port_rcvhdrq_size);
+ memset((void *)pd->port_rcvhdrtail_kvaddr, 0, PAGE_SIZE);
/*
* tell chip each time we init it, even if we are re-using previous
- * memory (we zero it at process close)
+ * memory (we zero the register at process close)
*/
- ipath_cdbg(VERBOSE, "writing port %d rcvhdraddr as %lx\n",
- pd->port_port, (unsigned long) pd->port_rcvhdrq_phys);
+ ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdrtailaddr,
+ pd->port_port, pd->port_rcvhdrqtailaddr_phys);
ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr,
pd->port_port, pd->port_rcvhdrq_phys);
@@ -1511,15 +1512,27 @@
[INFINIPATH_IBCC_LINKCMD_ARMED] = "ARMED",
[INFINIPATH_IBCC_LINKCMD_ACTIVE] = "ACTIVE"
};
+ int linkcmd = (which >> INFINIPATH_IBCC_LINKCMD_SHIFT) &
+ INFINIPATH_IBCC_LINKCMD_MASK;
+
ipath_cdbg(SMA, "Trying to move unit %u to %s, current ltstate "
"is %s\n", dd->ipath_unit,
- what[(which >> INFINIPATH_IBCC_LINKCMD_SHIFT) &
- INFINIPATH_IBCC_LINKCMD_MASK],
+ what[linkcmd],
ipath_ibcstatus_str[
(ipath_read_kreg64
(dd, dd->ipath_kregs->kr_ibcstatus) >>
INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
INFINIPATH_IBCS_LINKTRAININGSTATE_MASK]);
+ /* flush all queued sends when going to DOWN or INIT, to be sure that
+ * they don't block SMA and other MAD packets */
+ if (!linkcmd || linkcmd == INFINIPATH_IBCC_LINKCMD_INIT) {
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ INFINIPATH_S_ABORT);
+ ipath_disarm_piobufs(dd, dd->ipath_lastport_piobuf,
+ (unsigned)(dd->ipath_piobcnt2k +
+ dd->ipath_piobcnt4k) -
+ dd->ipath_lastport_piobuf);
+ }
ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
dd->ipath_ibcctrl | which);
@@ -1638,7 +1651,7 @@
/* disable IBC */
dd->ipath_control &= ~INFINIPATH_C_LINKENABLE;
ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control);
+ dd->ipath_control | INFINIPATH_C_FREEZEMODE);
/*
* clear SerdesEnable and turn the leds off; do this here because
@@ -1667,60 +1680,54 @@
/**
* ipath_free_pddata - free a port's allocated data
* @dd: the infinipath device
- * @port: the port
- * @freehdrq: free the port data structure if true
+ * @pd: the portdata structure
*
- * when closing, free up any allocated data for a port, if the
- * reference count goes to zero
- * Note: this also optionally frees the portdata itself!
- * Any changes here have to be matched up with the reinit case
- * of ipath_init_chip(), which calls this routine on reinit after reset.
+ * free up any allocated data for a port
+ * This should not touch anything that would affect a simultaneous
+ * re-allocation of port data, because it is called after ipath_mutex
+ * is released (and can be called from reinit as well).
+ * It should never change any chip state, or global driver state.
+ * (The only exception to global state is freeing the port0 port0_skbs.)
*/
-void ipath_free_pddata(struct ipath_devdata *dd, u32 port, int freehdrq)
+void ipath_free_pddata(struct ipath_devdata *dd, struct ipath_portdata *pd)
{
- struct ipath_portdata *pd = dd->ipath_pd[port];
-
if (!pd)
return;
- if (freehdrq)
- /*
- * only clear and free portdata if we are going to also
- * release the hdrq, otherwise we leak the hdrq on each
- * open/close cycle
- */
- dd->ipath_pd[port] = NULL;
- if (freehdrq && pd->port_rcvhdrq) {
+
+ if (pd->port_rcvhdrq) {
ipath_cdbg(VERBOSE, "free closed port %d rcvhdrq @ %p "
"(size=%lu)\n", pd->port_port, pd->port_rcvhdrq,
(unsigned long) pd->port_rcvhdrq_size);
dma_free_coherent(&dd->pcidev->dev, pd->port_rcvhdrq_size,
pd->port_rcvhdrq, pd->port_rcvhdrq_phys);
pd->port_rcvhdrq = NULL;
- }
- if (port && pd->port_rcvegrbuf) {
- /* always free this */
- if (pd->port_rcvegrbuf) {
- unsigned e;
-
- for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) {
- void *base = pd->port_rcvegrbuf[e];
- size_t size = pd->port_rcvegrbuf_size;
-
- ipath_cdbg(VERBOSE, "egrbuf free(%p, %lu), "
- "chunk %u/%u\n", base,
- (unsigned long) size,
- e, pd->port_rcvegrbuf_chunks);
- dma_free_coherent(
- &dd->pcidev->dev, size, base,
- pd->port_rcvegrbuf_phys[e]);
- }
- vfree(pd->port_rcvegrbuf);
- pd->port_rcvegrbuf = NULL;
- vfree(pd->port_rcvegrbuf_phys);
- pd->port_rcvegrbuf_phys = NULL;
+ if (pd->port_rcvhdrtail_kvaddr) {
+ dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
+ (void *)pd->port_rcvhdrtail_kvaddr,
+ pd->port_rcvhdrqtailaddr_phys);
+ pd->port_rcvhdrtail_kvaddr = NULL;
}
+ }
+ if (pd->port_port && pd->port_rcvegrbuf) {
+ unsigned e;
+
+ for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) {
+ void *base = pd->port_rcvegrbuf[e];
+ size_t size = pd->port_rcvegrbuf_size;
+
+ ipath_cdbg(VERBOSE, "egrbuf free(%p, %lu), "
+ "chunk %u/%u\n", base,
+ (unsigned long) size,
+ e, pd->port_rcvegrbuf_chunks);
+ dma_free_coherent(&dd->pcidev->dev, size,
+ base, pd->port_rcvegrbuf_phys[e]);
+ }
+ vfree(pd->port_rcvegrbuf);
+ pd->port_rcvegrbuf = NULL;
+ vfree(pd->port_rcvegrbuf_phys);
+ pd->port_rcvegrbuf_phys = NULL;
pd->port_rcvegrbuf_chunks = 0;
- } else if (port == 0 && dd->ipath_port0_skbs) {
+ } else if (pd->port_port == 0 && dd->ipath_port0_skbs) {
unsigned e;
struct sk_buff **skbs = dd->ipath_port0_skbs;
@@ -1732,10 +1739,8 @@
dev_kfree_skb(skbs[e]);
vfree(skbs);
}
- if (freehdrq) {
- kfree(pd->port_tid_pg_list);
- kfree(pd);
- }
+ kfree(pd->port_tid_pg_list);
+ kfree(pd);
}
static int __init infinipath_init(void)
@@ -1806,7 +1811,6 @@
* re-init
*/
dd->ipath_kregbase = NULL;
- dd->ipath_kregvirt = NULL;
dd->ipath_uregbase = 0;
dd->ipath_sregbase = 0;
dd->ipath_cregbase = 0;
@@ -1821,6 +1825,12 @@
dd->ipath_pioavailregs_phys);
dd->ipath_pioavailregs_dma = NULL;
}
+ if (dd->ipath_dummy_hdrq) {
+ dma_free_coherent(&dd->pcidev->dev,
+ dd->ipath_pd[0]->port_rcvhdrq_size,
+ dd->ipath_dummy_hdrq, dd->ipath_dummy_hdrq_phys);
+ dd->ipath_dummy_hdrq = NULL;
+ }
if (dd->ipath_pageshadow) {
struct page **tmpp = dd->ipath_pageshadow;
@@ -1861,10 +1871,14 @@
/*
* free any resources still in use (usually just kernel ports)
- * at unload
+ * at unload; we do for portcnt, not cfgports, because cfgports
+ * could have changed while we were loaded.
*/
- for (port = 0; port < dd->ipath_cfgports; port++)
- ipath_free_pddata(dd, port, 1);
+ for (port = 0; port < dd->ipath_portcnt; port++) {
+ struct ipath_portdata *pd = dd->ipath_pd[port];
+ dd->ipath_pd[port] = NULL;
+ ipath_free_pddata(dd, pd);
+ }
kfree(dd->ipath_pd);
/*
* debuggability, in case some cleanup path tries to use it
diff --git a/drivers/infiniband/hw/ipath/ipath_eeprom.c b/drivers/infiniband/hw/ipath/ipath_eeprom.c
index a2f1cea..3313356 100644
--- a/drivers/infiniband/hw/ipath/ipath_eeprom.c
+++ b/drivers/infiniband/hw/ipath/ipath_eeprom.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -600,8 +601,31 @@
guid = *(__be64 *) ifp->if_guid;
dd->ipath_guid = guid;
dd->ipath_nguid = ifp->if_numguid;
- memcpy(dd->ipath_serial, ifp->if_serial,
- sizeof(ifp->if_serial));
+ /*
+ * Things are slightly complicated by the desire to transparently
+ * support both the Pathscale 10-digit serial number and the QLogic
+ * 13-character version.
+ */
+ if ((ifp->if_fversion > 1) && ifp->if_sprefix[0]
+ && ((u8 *)ifp->if_sprefix)[0] != 0xFF) {
+ /* This board has a Serial-prefix, which is stored
+ * elsewhere for backward-compatibility.
+ */
+ char *snp = dd->ipath_serial;
+ int len;
+ memcpy(snp, ifp->if_sprefix, sizeof ifp->if_sprefix);
+ snp[sizeof ifp->if_sprefix] = '\0';
+ len = strlen(snp);
+ snp += len;
+ len = (sizeof dd->ipath_serial) - len;
+ if (len > sizeof ifp->if_serial) {
+ len = sizeof ifp->if_serial;
+ }
+ memcpy(snp, ifp->if_serial, len);
+ } else
+ memcpy(dd->ipath_serial, ifp->if_serial,
+ sizeof ifp->if_serial);
+
ipath_cdbg(VERBOSE, "Initted GUID to %llx from eeprom\n",
(unsigned long long) be64_to_cpu(dd->ipath_guid));
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index ada267e4..bbaa70e 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -38,8 +39,8 @@
#include <asm/pgtable.h>
#include "ipath_kernel.h"
-#include "ips_common.h"
#include "ipath_layer.h"
+#include "ipath_common.h"
static int ipath_open(struct inode *, struct file *);
static int ipath_close(struct inode *, struct file *);
@@ -122,6 +123,7 @@
* on to yet another method of dealing with this
*/
kinfo->spi_rcvhdr_base = (u64) pd->port_rcvhdrq_phys;
+ kinfo->spi_rcvhdr_tailaddr = (u64)pd->port_rcvhdrqtailaddr_phys;
kinfo->spi_rcv_egrbufs = (u64) pd->port_rcvegr_phys;
kinfo->spi_pioavailaddr = (u64) dd->ipath_pioavailregs_phys;
kinfo->spi_status = (u64) kinfo->spi_pioavailaddr +
@@ -456,7 +458,7 @@
u16 lkey = key & 0x7FFF;
int ret;
- if (lkey == (IPS_DEFAULT_P_KEY & 0x7FFF)) {
+ if (lkey == (IPATH_DEFAULT_P_KEY & 0x7FFF)) {
/* nothing to do; this key always valid */
ret = 0;
goto bail;
@@ -704,6 +706,15 @@
unsigned e, egrcnt, alloced, egrperchunk, chunk, egrsize, egroff;
size_t size;
int ret;
+ gfp_t gfp_flags;
+
+ /*
+ * GFP_USER, but without GFP_FS, so buffer cache can be
+ * coalesced (we hope); otherwise, even at order 4,
+ * heavy filesystem activity makes these fail, and we can
+ * use compound pages.
+ */
+ gfp_flags = __GFP_WAIT | __GFP_IO | __GFP_COMP;
egrcnt = dd->ipath_rcvegrcnt;
/* TID number offset for this port */
@@ -720,10 +731,8 @@
* memory pressure (creating large files and then copying them over
* NFS while doing lots of MPI jobs), we hit some allocation
* failures, even though we can sleep... (2.6.10) Still get
- * failures at 64K. 32K is the lowest we can go without waiting
- * more memory again. It seems likely that the coalescing in
- * free_pages, etc. still has issues (as it has had previously
- * during 2.6.x development).
+ * failures at 64K. 32K is the lowest we can go without wasting
+ * additional memory.
*/
size = 0x8000;
alloced = ALIGN(egrsize * egrcnt, size);
@@ -744,12 +753,6 @@
goto bail_rcvegrbuf;
}
for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) {
- /*
- * GFP_USER, but without GFP_FS, so buffer cache can be
- * coalesced (we hope); otherwise, even at order 4,
- * heavy filesystem activity makes these fail
- */
- gfp_t gfp_flags = __GFP_WAIT | __GFP_IO | __GFP_COMP;
pd->port_rcvegrbuf[e] = dma_alloc_coherent(
&dd->pcidev->dev, size, &pd->port_rcvegrbuf_phys[e],
@@ -783,11 +786,12 @@
bail_rcvegrbuf_phys:
for (e = 0; e < pd->port_rcvegrbuf_chunks &&
- pd->port_rcvegrbuf[e]; e++)
+ pd->port_rcvegrbuf[e]; e++) {
dma_free_coherent(&dd->pcidev->dev, size,
pd->port_rcvegrbuf[e],
pd->port_rcvegrbuf_phys[e]);
+ }
vfree(pd->port_rcvegrbuf_phys);
pd->port_rcvegrbuf_phys = NULL;
bail_rcvegrbuf:
@@ -802,10 +806,7 @@
{
int ret = 0;
struct ipath_devdata *dd = pd->port_dd;
- u64 physaddr, uaddr, off, atmp;
- struct page *pagep;
u32 head32;
- u64 head;
/* for now, if major version is different, bail */
if ((uinfo->spu_userversion >> 16) != IPATH_USER_SWMAJOR) {
@@ -830,54 +831,6 @@
/* for now we do nothing with rcvhdrcnt: uinfo->spu_rcvhdrcnt */
- /* set up for the rcvhdr Q tail register writeback to user memory */
- if (!uinfo->spu_rcvhdraddr ||
- !access_ok(VERIFY_WRITE, (u64 __user *) (unsigned long)
- uinfo->spu_rcvhdraddr, sizeof(u64))) {
- ipath_dbg("Port %d rcvhdrtail addr %llx not valid\n",
- pd->port_port,
- (unsigned long long) uinfo->spu_rcvhdraddr);
- ret = -EINVAL;
- goto done;
- }
-
- off = offset_in_page(uinfo->spu_rcvhdraddr);
- uaddr = PAGE_MASK & (unsigned long) uinfo->spu_rcvhdraddr;
- ret = ipath_get_user_pages_nocopy(uaddr, &pagep);
- if (ret) {
- dev_info(&dd->pcidev->dev, "Failed to lookup and lock "
- "address %llx for rcvhdrtail: errno %d\n",
- (unsigned long long) uinfo->spu_rcvhdraddr, -ret);
- goto done;
- }
- ipath_stats.sps_pagelocks++;
- pd->port_rcvhdrtail_uaddr = uaddr;
- pd->port_rcvhdrtail_pagep = pagep;
- pd->port_rcvhdrtail_kvaddr =
- page_address(pagep);
- pd->port_rcvhdrtail_kvaddr += off;
- physaddr = page_to_phys(pagep) + off;
- ipath_cdbg(VERBOSE, "port %d user addr %llx hdrtailaddr, %llx "
- "physical (off=%llx)\n",
- pd->port_port,
- (unsigned long long) uinfo->spu_rcvhdraddr,
- (unsigned long long) physaddr, (unsigned long long) off);
- ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdrtailaddr,
- pd->port_port, physaddr);
- atmp = ipath_read_kreg64_port(dd,
- dd->ipath_kregs->kr_rcvhdrtailaddr,
- pd->port_port);
- if (physaddr != atmp) {
- ipath_dev_err(dd,
- "Catastrophic software error, "
- "RcvHdrTailAddr%u written as %llx, "
- "read back as %llx\n", pd->port_port,
- (unsigned long long) physaddr,
- (unsigned long long) atmp);
- ret = -EINVAL;
- goto done;
- }
-
/* for right now, kernel piobufs are at end, so port 1 is at 0 */
pd->port_piobufs = dd->ipath_piobufbase +
dd->ipath_pbufsport * (pd->port_port -
@@ -896,26 +849,18 @@
ret = ipath_create_user_egr(pd);
if (ret)
goto done;
- /* enable receives now */
- /* atomically set enable bit for this port */
- set_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port,
- &dd->ipath_rcvctrl);
/*
- * set the head registers for this port to the current values
+ * set the eager head register for this port to the current values
* of the tail pointers, since we don't know if they were
* updated on last use of the port.
*/
- head32 = ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
- head = (u64) head32;
- ipath_write_ureg(dd, ur_rcvhdrhead, head, pd->port_port);
head32 = ipath_read_ureg32(dd, ur_rcvegrindextail, pd->port_port);
ipath_write_ureg(dd, ur_rcvegrindexhead, head32, pd->port_port);
dd->ipath_lastegrheads[pd->port_port] = -1;
dd->ipath_lastrcvhdrqtails[pd->port_port] = -1;
- ipath_cdbg(VERBOSE, "Wrote port%d head %llx, egrhead %x from "
- "tail regs\n", pd->port_port,
- (unsigned long long) head, head32);
+ ipath_cdbg(VERBOSE, "Wrote port%d egrhead %x from tail regs\n",
+ pd->port_port, head32);
pd->port_tidcursor = 0; /* start at beginning after open */
/*
* now enable the port; the tail registers will be written to memory
@@ -924,24 +869,76 @@
* transition from 0 to 1, so clear it first, then set it as part of
* enabling the port. This will (very briefly) affect any other
* open ports, but it shouldn't be long enough to be an issue.
+ * We explictly set the in-memory copy to 0 beforehand, so we don't
+ * have to wait to be sure the DMA update has happened.
*/
+ *pd->port_rcvhdrtail_kvaddr = 0ULL;
+ set_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port,
+ &dd->ipath_rcvctrl);
ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
dd->ipath_rcvctrl & ~INFINIPATH_R_TAILUPD);
ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
dd->ipath_rcvctrl);
-
done:
return ret;
}
+
+/* common code for the mappings on dma_alloc_coherent mem */
+static int ipath_mmap_mem(struct vm_area_struct *vma,
+ struct ipath_portdata *pd, unsigned len,
+ int write_ok, dma_addr_t addr, char *what)
+{
+ struct ipath_devdata *dd = pd->port_dd;
+ unsigned pfn = (unsigned long)addr >> PAGE_SHIFT;
+ int ret;
+
+ if ((vma->vm_end - vma->vm_start) > len) {
+ dev_info(&dd->pcidev->dev,
+ "FAIL on %s: len %lx > %x\n", what,
+ vma->vm_end - vma->vm_start, len);
+ ret = -EFAULT;
+ goto bail;
+ }
+
+ if (!write_ok) {
+ if (vma->vm_flags & VM_WRITE) {
+ dev_info(&dd->pcidev->dev,
+ "%s must be mapped readonly\n", what);
+ ret = -EPERM;
+ goto bail;
+ }
+
+ /* don't allow them to later change with mprotect */
+ vma->vm_flags &= ~VM_MAYWRITE;
+ }
+
+ ret = remap_pfn_range(vma, vma->vm_start, pfn,
+ len, vma->vm_page_prot);
+ if (ret)
+ dev_info(&dd->pcidev->dev,
+ "%s port%u mmap of %lx, %x bytes r%c failed: %d\n",
+ what, pd->port_port, (unsigned long)addr, len,
+ write_ok?'w':'o', ret);
+ else
+ ipath_cdbg(VERBOSE, "%s port%u mmaped %lx, %x bytes r%c\n",
+ what, pd->port_port, (unsigned long)addr, len,
+ write_ok?'w':'o');
+bail:
+ return ret;
+}
+
static int mmap_ureg(struct vm_area_struct *vma, struct ipath_devdata *dd,
u64 ureg)
{
unsigned long phys;
int ret;
- /* it's the real hardware, so io_remap works */
-
+ /*
+ * This is real hardware, so use io_remap. This is the mechanism
+ * for the user process to update the head registers for their port
+ * in the chip.
+ */
if ((vma->vm_end - vma->vm_start) > PAGE_SIZE) {
dev_info(&dd->pcidev->dev, "FAIL mmap userreg: reqlen "
"%lx > PAGE\n", vma->vm_end - vma->vm_start);
@@ -967,10 +964,11 @@
int ret;
/*
- * When we map the PIO buffers, we want to map them as writeonly, no
- * read possible.
+ * When we map the PIO buffers in the chip, we want to map them as
+ * writeonly, no read possible. This prevents access to previous
+ * process data, and catches users who might try to read the i/o
+ * space due to a bug.
*/
-
if ((vma->vm_end - vma->vm_start) >
(dd->ipath_pbufsport * dd->ipath_palign)) {
dev_info(&dd->pcidev->dev, "FAIL mmap piobufs: "
@@ -981,11 +979,10 @@
}
phys = dd->ipath_physaddr + pd->port_piobufs;
+
/*
- * Do *NOT* mark this as non-cached (PWT bit), or we don't get the
+ * Don't mark this as non-cached, or we don't get the
* write combining behavior we want on the PIO buffers!
- * vma->vm_page_prot =
- * pgprot_noncached(vma->vm_page_prot);
*/
if (vma->vm_flags & VM_READ) {
@@ -997,8 +994,7 @@
}
/* don't allow them to later change to readable with mprotect */
-
- vma->vm_flags &= ~VM_MAYWRITE;
+ vma->vm_flags &= ~VM_MAYREAD;
vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND;
ret = io_remap_pfn_range(vma, vma->vm_start, phys >> PAGE_SHIFT,
@@ -1017,11 +1013,6 @@
dma_addr_t *phys;
int ret;
- if (!pd->port_rcvegrbuf) {
- ret = -EFAULT;
- goto bail;
- }
-
size = pd->port_rcvegrbuf_size;
total_size = pd->port_rcvegrbuf_chunks * size;
if ((vma->vm_end - vma->vm_start) > total_size) {
@@ -1039,13 +1030,12 @@
ret = -EPERM;
goto bail;
}
+ /* don't allow them to later change to writeable with mprotect */
+ vma->vm_flags &= ~VM_MAYWRITE;
start = vma->vm_start;
phys = pd->port_rcvegrbuf_phys;
- /* don't allow them to later change to writeable with mprotect */
- vma->vm_flags &= ~VM_MAYWRITE;
-
for (i = 0; i < pd->port_rcvegrbuf_chunks; i++, start += size) {
ret = remap_pfn_range(vma, start, phys[i] >> PAGE_SHIFT,
size, vma->vm_page_prot);
@@ -1058,78 +1048,6 @@
return ret;
}
-static int mmap_rcvhdrq(struct vm_area_struct *vma,
- struct ipath_portdata *pd)
-{
- struct ipath_devdata *dd = pd->port_dd;
- size_t total_size;
- int ret;
-
- /*
- * kmalloc'ed memory, physically contiguous; this is from
- * spi_rcvhdr_base; we allow user to map read-write so they can
- * write hdrq entries to allow protocol code to directly poll
- * whether a hdrq entry has been written.
- */
- total_size = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize *
- sizeof(u32), PAGE_SIZE);
- if ((vma->vm_end - vma->vm_start) > total_size) {
- dev_info(&dd->pcidev->dev,
- "FAIL on rcvhdrq: reqlen %lx > actual %lx\n",
- vma->vm_end - vma->vm_start,
- (unsigned long) total_size);
- ret = -EFAULT;
- goto bail;
- }
-
- ret = remap_pfn_range(vma, vma->vm_start,
- pd->port_rcvhdrq_phys >> PAGE_SHIFT,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot);
-bail:
- return ret;
-}
-
-static int mmap_pioavailregs(struct vm_area_struct *vma,
- struct ipath_portdata *pd)
-{
- struct ipath_devdata *dd = pd->port_dd;
- int ret;
-
- /*
- * when we map the PIO bufferavail registers, we want to map them as
- * readonly, no write possible.
- *
- * kmalloc'ed memory, physically contiguous, one page only, readonly
- */
-
- if ((vma->vm_end - vma->vm_start) > PAGE_SIZE) {
- dev_info(&dd->pcidev->dev, "FAIL on pioavailregs_dma: "
- "reqlen %lx > actual %lx\n",
- vma->vm_end - vma->vm_start,
- (unsigned long) PAGE_SIZE);
- ret = -EFAULT;
- goto bail;
- }
-
- if (vma->vm_flags & VM_WRITE) {
- dev_info(&dd->pcidev->dev,
- "Can't map pioavailregs as writable (flags=%lx)\n",
- vma->vm_flags);
- ret = -EPERM;
- goto bail;
- }
-
- /* don't allow them to later change with mprotect */
- vma->vm_flags &= ~VM_MAYWRITE;
-
- ret = remap_pfn_range(vma, vma->vm_start,
- dd->ipath_pioavailregs_phys >> PAGE_SHIFT,
- PAGE_SIZE, vma->vm_page_prot);
-bail:
- return ret;
-}
-
/**
* ipath_mmap - mmap various structures into user space
* @fp: the file pointer
@@ -1149,6 +1067,7 @@
pd = port_fp(fp);
dd = pd->port_dd;
+
/*
* This is the ipath_do_user_init() code, mapping the shared buffers
* into the user process. The address referred to by vm_pgoff is the
@@ -1158,28 +1077,59 @@
pgaddr = vma->vm_pgoff << PAGE_SHIFT;
/*
- * note that ureg does *NOT* have the kregvirt as part of it, to be
- * sure that for 32 bit programs, we don't end up trying to map a >
- * 44 address. Has to match ipath_get_base_info() code that sets
- * __spi_uregbase
+ * Must fit in 40 bits for our hardware; some checked elsewhere,
+ * but we'll be paranoid. Check for 0 is mostly in case one of the
+ * allocations failed, but user called mmap anyway. We want to catch
+ * that before it can match.
*/
+ if (!pgaddr || pgaddr >= (1ULL<<40)) {
+ ipath_dev_err(dd, "Bad phys addr %llx, start %lx, end %lx\n",
+ (unsigned long long)pgaddr, vma->vm_start, vma->vm_end);
+ return -EINVAL;
+ }
+ /* just the offset of the port user registers, not physical addr */
ureg = dd->ipath_uregbase + dd->ipath_palign * pd->port_port;
ipath_cdbg(MM, "ushare: pgaddr %llx vm_start=%lx, vmlen %lx\n",
(unsigned long long) pgaddr, vma->vm_start,
vma->vm_end - vma->vm_start);
- if (pgaddr == ureg)
+ if (vma->vm_start & (PAGE_SIZE-1)) {
+ ipath_dev_err(dd,
+ "vm_start not aligned: %lx, end=%lx phys %lx\n",
+ vma->vm_start, vma->vm_end, (unsigned long)pgaddr);
+ ret = -EINVAL;
+ }
+ else if (pgaddr == ureg)
ret = mmap_ureg(vma, dd, ureg);
else if (pgaddr == pd->port_piobufs)
ret = mmap_piobufs(vma, dd, pd);
else if (pgaddr == (u64) pd->port_rcvegr_phys)
ret = mmap_rcvegrbufs(vma, pd);
- else if (pgaddr == (u64) pd->port_rcvhdrq_phys)
- ret = mmap_rcvhdrq(vma, pd);
+ else if (pgaddr == (u64) pd->port_rcvhdrq_phys) {
+ /*
+ * The rcvhdrq itself; readonly except on HT-400 (so have
+ * to allow writable mapping), multiple pages, contiguous
+ * from an i/o perspective.
+ */
+ unsigned total_size =
+ ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize
+ * sizeof(u32), PAGE_SIZE);
+ ret = ipath_mmap_mem(vma, pd, total_size, 1,
+ pd->port_rcvhdrq_phys,
+ "rcvhdrq");
+ }
+ else if (pgaddr == (u64)pd->port_rcvhdrqtailaddr_phys)
+ /* in-memory copy of rcvhdrq tail register */
+ ret = ipath_mmap_mem(vma, pd, PAGE_SIZE, 0,
+ pd->port_rcvhdrqtailaddr_phys,
+ "rcvhdrq tail");
else if (pgaddr == dd->ipath_pioavailregs_phys)
- ret = mmap_pioavailregs(vma, pd);
+ /* in-memory copy of pioavail registers */
+ ret = ipath_mmap_mem(vma, pd, PAGE_SIZE, 0,
+ dd->ipath_pioavailregs_phys,
+ "pioavail registers");
else
ret = -EINVAL;
@@ -1442,16 +1392,16 @@
static int ipath_open(struct inode *in, struct file *fp)
{
- int ret, minor;
+ int ret, user_minor;
mutex_lock(&ipath_mutex);
- minor = iminor(in);
+ user_minor = iminor(in) - IPATH_USER_MINOR_BASE;
ipath_cdbg(VERBOSE, "open on dev %lx (minor %d)\n",
- (long)in->i_rdev, minor);
+ (long)in->i_rdev, user_minor);
- if (minor)
- ret = find_free_port(minor - 1, fp);
+ if (user_minor)
+ ret = find_free_port(user_minor - 1, fp);
else
ret = find_best_unit(fp);
@@ -1536,53 +1486,54 @@
}
if (dd->ipath_kregbase) {
- if (pd->port_rcvhdrtail_uaddr) {
- pd->port_rcvhdrtail_uaddr = 0;
- pd->port_rcvhdrtail_kvaddr = NULL;
- ipath_release_user_pages_on_close(
- &pd->port_rcvhdrtail_pagep, 1);
- pd->port_rcvhdrtail_pagep = NULL;
- ipath_stats.sps_pageunlocks++;
- }
- ipath_write_kreg_port(
- dd, dd->ipath_kregs->kr_rcvhdrtailaddr,
- port, 0ULL);
- ipath_write_kreg_port(
- dd, dd->ipath_kregs->kr_rcvhdraddr,
- pd->port_port, 0);
+ int i;
+ /* atomically clear receive enable port. */
+ clear_bit(INFINIPATH_R_PORTENABLE_SHIFT + port,
+ &dd->ipath_rcvctrl);
+ ipath_write_kreg( dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl);
+ /* and read back from chip to be sure that nothing
+ * else is in flight when we do the rest */
+ (void)ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
/* clean up the pkeys for this port user */
ipath_clean_part_key(pd, dd);
- if (port < dd->ipath_cfgports) {
- int i = dd->ipath_pbufsport * (port - 1);
- ipath_disarm_piobufs(dd, i, dd->ipath_pbufsport);
- /* atomically clear receive enable port. */
- clear_bit(INFINIPATH_R_PORTENABLE_SHIFT + port,
- &dd->ipath_rcvctrl);
- ipath_write_kreg(
- dd,
- dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
+ /*
+ * be paranoid, and never write 0's to these, just use an
+ * unused part of the port 0 tail page. Of course,
+ * rcvhdraddr points to a large chunk of memory, so this
+ * could still trash things, but at least it won't trash
+ * page 0, and by disabling the port, it should stop "soon",
+ * even if a packet or two is in already in flight after we
+ * disabled the port.
+ */
+ ipath_write_kreg_port(dd,
+ dd->ipath_kregs->kr_rcvhdrtailaddr, port,
+ dd->ipath_dummy_hdrq_phys);
+ ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr,
+ pd->port_port, dd->ipath_dummy_hdrq_phys);
- if (dd->ipath_pageshadow)
- unlock_expected_tids(pd);
- ipath_stats.sps_ports--;
- ipath_cdbg(PROC, "%s[%u] closed port %u:%u\n",
- pd->port_comm, pd->port_pid,
- dd->ipath_unit, port);
- }
+ i = dd->ipath_pbufsport * (port - 1);
+ ipath_disarm_piobufs(dd, i, dd->ipath_pbufsport);
+
+ if (dd->ipath_pageshadow)
+ unlock_expected_tids(pd);
+ ipath_stats.sps_ports--;
+ ipath_cdbg(PROC, "%s[%u] closed port %u:%u\n",
+ pd->port_comm, pd->port_pid,
+ dd->ipath_unit, port);
+
+ dd->ipath_f_clear_tids(dd, pd->port_port);
}
pd->port_cnt = 0;
pd->port_pid = 0;
- dd->ipath_f_clear_tids(dd, pd->port_port);
-
- ipath_free_pddata(dd, pd->port_port, 0);
-
+ dd->ipath_pd[pd->port_port] = NULL; /* before releasing mutex */
mutex_unlock(&ipath_mutex);
+ ipath_free_pddata(dd, pd); /* after releasing the mutex */
return ret;
}
@@ -1859,19 +1810,12 @@
"error %d\n", -ret);
goto bail;
}
- ret = ipath_diag_init();
- if (ret < 0) {
- ipath_dev_err(dd, "Unable to set up diag support: "
- "error %d\n", -ret);
- goto bail_sma;
- }
-
ret = init_cdev(0, "ipath", &ipath_file_ops, &wildcard_cdev,
&wildcard_class_dev);
if (ret < 0) {
ipath_dev_err(dd, "Could not create wildcard "
"minor: error %d\n", -ret);
- goto bail_diag;
+ goto bail_sma;
}
atomic_set(&user_setup, 1);
@@ -1880,31 +1824,28 @@
snprintf(name, sizeof(name), "ipath%d", dd->ipath_unit);
ret = init_cdev(dd->ipath_unit + 1, name, &ipath_file_ops,
- &dd->cdev, &dd->class_dev);
+ &dd->user_cdev, &dd->user_class_dev);
if (ret < 0)
ipath_dev_err(dd, "Could not create user minor %d, %s\n",
dd->ipath_unit + 1, name);
goto bail;
-bail_diag:
- ipath_diag_cleanup();
bail_sma:
user_cleanup();
bail:
return ret;
}
-void ipath_user_del(struct ipath_devdata *dd)
+void ipath_user_remove(struct ipath_devdata *dd)
{
- cleanup_cdev(&dd->cdev, &dd->class_dev);
+ cleanup_cdev(&dd->user_cdev, &dd->user_class_dev);
if (atomic_dec_return(&user_count) == 0) {
if (atomic_read(&user_setup) == 0)
goto bail;
cleanup_cdev(&wildcard_cdev, &wildcard_class_dev);
- ipath_diag_cleanup();
user_cleanup();
atomic_set(&user_setup, 0);
@@ -1912,3 +1853,4 @@
bail:
return;
}
+
diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c
index 97f142c..0936d8e 100644
--- a/drivers/infiniband/hw/ipath/ipath_fs.c
+++ b/drivers/infiniband/hw/ipath/ipath_fs.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
diff --git a/drivers/infiniband/hw/ipath/ipath_ht400.c b/drivers/infiniband/hw/ipath/ipath_ht400.c
index fac0a2b..3db015d 100644
--- a/drivers/infiniband/hw/ipath/ipath_ht400.c
+++ b/drivers/infiniband/hw/ipath/ipath_ht400.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -1572,7 +1573,6 @@
dd->ipath_f_reset = ipath_setup_ht_reset;
dd->ipath_f_get_boardname = ipath_ht_boardname;
dd->ipath_f_init_hwerrors = ipath_ht_init_hwerrors;
- dd->ipath_f_init_hwerrors = ipath_ht_init_hwerrors;
dd->ipath_f_early_init = ipath_ht_early_init;
dd->ipath_f_handle_hwerrors = ipath_ht_handle_hwerrors;
dd->ipath_f_quiet_serdes = ipath_ht_quiet_serdes;
diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c
index dc83250..414cdd1 100644
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -35,7 +36,7 @@
#include <linux/vmalloc.h>
#include "ipath_kernel.h"
-#include "ips_common.h"
+#include "ipath_common.h"
/*
* min buffers we want to have per port, after driver
@@ -114,6 +115,7 @@
"eager TID %u\n", e);
while (e != 0)
dev_kfree_skb(skbs[--e]);
+ vfree(skbs);
ret = -ENOMEM;
goto bail;
}
@@ -275,7 +277,7 @@
pd->port_port = 0;
pd->port_cnt = 1;
/* The port 0 pkey table is used by the layer interface. */
- pd->port_pkeys[0] = IPS_DEFAULT_P_KEY;
+ pd->port_pkeys[0] = IPATH_DEFAULT_P_KEY;
dd->ipath_rcvtidcnt =
ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
dd->ipath_rcvtidbase =
@@ -409,17 +411,8 @@
/* and its length */
dd->ipath_freezelen = L1_CACHE_BYTES - sizeof(dd->ipath_statusp[0]);
- if (dd->ipath_unit * 64 > (IPATH_PORT0_RCVHDRTAIL_SIZE - 64)) {
- ipath_dev_err(dd, "unit %u too large for port 0 "
- "rcvhdrtail buffer size\n", dd->ipath_unit);
- ret = -ENODEV;
- }
- else
- ret = 0;
+ ret = 0;
- /* so we can get current tail in ipath_kreceive(), per chip */
- dd->ipath_hdrqtailptr = &ipath_port0_rcvhdrtail[
- dd->ipath_unit * (64 / sizeof(*ipath_port0_rcvhdrtail))];
done:
return ret;
}
@@ -652,8 +645,9 @@
{
int ret = 0, i;
u32 val32, kpiobufs;
- u64 val, atmp;
+ u64 val;
struct ipath_portdata *pd = NULL; /* keep gcc4 happy */
+ gfp_t gfp_flags = GFP_USER | __GFP_COMP;
ret = init_housekeeping(dd, &pd, reinit);
if (ret)
@@ -775,24 +769,6 @@
goto done;
}
- val = ipath_port0_rcvhdrtail_dma + dd->ipath_unit * 64;
-
- /* verify that the alignment requirement was met */
- ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdrtailaddr,
- 0, val);
- atmp = ipath_read_kreg64_port(
- dd, dd->ipath_kregs->kr_rcvhdrtailaddr, 0);
- if (val != atmp) {
- ipath_dev_err(dd, "Catastrophic software error, "
- "RcvHdrTailAddr0 written as %llx, "
- "read back as %llx from %x\n",
- (unsigned long long) val,
- (unsigned long long) atmp,
- dd->ipath_kregs->kr_rcvhdrtailaddr);
- ret = -EINVAL;
- goto done;
- }
-
ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvbthqp, IPATH_KD_QP);
/*
@@ -836,25 +812,45 @@
/* clear any interrups up to this point (ints still not enabled) */
ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL);
- ipath_stats.sps_lid[dd->ipath_unit] = dd->ipath_lid;
-
/*
* Set up the port 0 (kernel) rcvhdr q and egr TIDs. If doing
* re-init, the simplest way to handle this is to free
* existing, and re-allocate.
*/
- if (reinit)
- ipath_free_pddata(dd, 0, 0);
+ if (reinit) {
+ struct ipath_portdata *pd = dd->ipath_pd[0];
+ dd->ipath_pd[0] = NULL;
+ ipath_free_pddata(dd, pd);
+ }
dd->ipath_f_tidtemplate(dd);
ret = ipath_create_rcvhdrq(dd, pd);
- if (!ret)
+ if (!ret) {
+ dd->ipath_hdrqtailptr =
+ (volatile __le64 *)pd->port_rcvhdrtail_kvaddr;
ret = create_port0_egr(dd);
+ }
if (ret)
ipath_dev_err(dd, "failed to allocate port 0 (kernel) "
"rcvhdrq and/or egr bufs\n");
else
enable_chip(dd, pd, reinit);
+
+ if (!ret && !reinit) {
+ /* used when we close a port, for DMA already in flight at close */
+ dd->ipath_dummy_hdrq = dma_alloc_coherent(
+ &dd->pcidev->dev, pd->port_rcvhdrq_size,
+ &dd->ipath_dummy_hdrq_phys,
+ gfp_flags);
+ if (!dd->ipath_dummy_hdrq ) {
+ dev_info(&dd->pcidev->dev,
+ "Couldn't allocate 0x%lx bytes for dummy hdrq\n",
+ pd->port_rcvhdrq_size);
+ /* fallback to just 0'ing */
+ dd->ipath_dummy_hdrq_phys = 0UL;
+ }
+ }
+
/*
* cause retrigger of pending interrupts ignored during init,
* even if we had errors
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index 5e31d0d..280e732 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -33,9 +34,10 @@
#include <linux/pci.h>
#include "ipath_kernel.h"
-#include "ips_common.h"
#include "ipath_layer.h"
+#include "ipath_common.h"
+/* These are all rcv-related errors which we want to count for stats */
#define E_SUM_PKTERRS \
(INFINIPATH_E_RHDRLEN | INFINIPATH_E_RBADTID | \
INFINIPATH_E_RBADVERSION | INFINIPATH_E_RHDR | \
@@ -44,6 +46,7 @@
INFINIPATH_E_RFORMATERR | INFINIPATH_E_RUNSUPVL | \
INFINIPATH_E_RUNEXPCHAR | INFINIPATH_E_REBP)
+/* These are all send-related errors which we want to count for stats */
#define E_SUM_ERRS \
(INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM | \
INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
@@ -51,6 +54,18 @@
INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SPKTLEN | \
INFINIPATH_E_INVALIDADDR)
+/*
+ * these are errors that can occur when the link changes state while
+ * a packet is being sent or received. This doesn't cover things
+ * like EBP or VCRC that can be the result of a sending having the
+ * link change state, so we receive a "known bad" packet.
+ */
+#define E_SUM_LINK_PKTERRS \
+ (INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
+ INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SPKTLEN | \
+ INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RMINPKTLEN | \
+ INFINIPATH_E_RUNEXPCHAR)
+
static u64 handle_e_sum_errs(struct ipath_devdata *dd, ipath_err_t errs)
{
unsigned long sbuf[4];
@@ -100,9 +115,7 @@
if (ipath_debug & __IPATH_PKTDBG)
printk("\n");
}
- if ((errs & (INFINIPATH_E_SDROPPEDDATAPKT |
- INFINIPATH_E_SDROPPEDSMPPKT |
- INFINIPATH_E_SMINPKTLEN)) &&
+ if ((errs & E_SUM_LINK_PKTERRS) &&
!(dd->ipath_flags & IPATH_LINKACTIVE)) {
/*
* This can happen when SMA is trying to bring the link
@@ -111,11 +124,9 @@
* valid. We don't want to confuse people, so we just
* don't print them, except at debug
*/
- ipath_dbg("Ignoring pktsend errors %llx, because not "
- "yet active\n", (unsigned long long) errs);
- ignore_this_time = INFINIPATH_E_SDROPPEDDATAPKT |
- INFINIPATH_E_SDROPPEDSMPPKT |
- INFINIPATH_E_SMINPKTLEN;
+ ipath_dbg("Ignoring packet errors %llx, because link not "
+ "ACTIVE\n", (unsigned long long) errs);
+ ignore_this_time = errs & E_SUM_LINK_PKTERRS;
}
return ignore_this_time;
@@ -156,7 +167,29 @@
*/
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
lstate = val & IPATH_IBSTATE_MASK;
- if (lstate == IPATH_IBSTATE_INIT || lstate == IPATH_IBSTATE_ARM ||
+
+ /*
+ * this is confusing enough when it happens that I want to always put it
+ * on the console and in the logs. If it was a requested state change,
+ * we'll have already cleared the flags, so we won't print this warning
+ */
+ if ((lstate != IPATH_IBSTATE_ARM && lstate != IPATH_IBSTATE_ACTIVE)
+ && (dd->ipath_flags & (IPATH_LINKARMED | IPATH_LINKACTIVE))) {
+ dev_info(&dd->pcidev->dev, "Link state changed from %s to %s\n",
+ (dd->ipath_flags & IPATH_LINKARMED) ? "ARM" : "ACTIVE",
+ ib_linkstate(lstate));
+ /*
+ * Flush all queued sends when link went to DOWN or INIT,
+ * to be sure that they don't block SMA and other MAD packets
+ */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ INFINIPATH_S_ABORT);
+ ipath_disarm_piobufs(dd, dd->ipath_lastport_piobuf,
+ (unsigned)(dd->ipath_piobcnt2k +
+ dd->ipath_piobcnt4k) -
+ dd->ipath_lastport_piobuf);
+ }
+ else if (lstate == IPATH_IBSTATE_INIT || lstate == IPATH_IBSTATE_ARM ||
lstate == IPATH_IBSTATE_ACTIVE) {
/*
* only print at SMA if there is a change, debug if not
@@ -229,6 +262,7 @@
| IPATH_LINKACTIVE |
IPATH_LINKARMED);
*dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
+ dd->ipath_lli_counter = 0;
if (!noprint) {
if (((dd->ipath_lastibcstat >>
INFINIPATH_IBCS_LINKSTATE_SHIFT) &
@@ -350,7 +384,7 @@
return supp_msgs;
}
-static void handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
+static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
{
char msg[512];
u64 ignore_this_time = 0;
@@ -379,6 +413,19 @@
if (errs & E_SUM_ERRS)
ignore_this_time = handle_e_sum_errs(dd, errs);
+ else if ((errs & E_SUM_LINK_PKTERRS) &&
+ !(dd->ipath_flags & IPATH_LINKACTIVE)) {
+ /*
+ * This can happen when SMA is trying to bring the link
+ * up, but the IB link changes state at the "wrong" time.
+ * The IB logic then complains that the packet isn't
+ * valid. We don't want to confuse people, so we just
+ * don't print them, except at debug
+ */
+ ipath_dbg("Ignoring packet errors %llx, because link not "
+ "ACTIVE\n", (unsigned long long) errs);
+ ignore_this_time = errs & E_SUM_LINK_PKTERRS;
+ }
if (supp_msgs == 250000) {
/*
@@ -434,7 +481,7 @@
INFINIPATH_E_IBSTATUSCHANGED);
}
if (!errs)
- return;
+ return 0;
if (!noprint)
/*
@@ -493,10 +540,10 @@
continue;
if (hd == (tl + 1) ||
(!hd && tl == dd->ipath_hdrqlast)) {
- dd->ipath_lastrcvhdrqtails[i] = tl;
- pd->port_hdrqfull++;
if (i == 0)
chkerrpkts = 1;
+ dd->ipath_lastrcvhdrqtails[i] = tl;
+ pd->port_hdrqfull++;
}
}
}
@@ -558,9 +605,7 @@
wake_up_interruptible(&ipath_sma_state_wait);
}
- if (chkerrpkts)
- /* process possible error packets in hdrq */
- ipath_kreceive(dd);
+ return chkerrpkts;
}
/* this is separate to allow for better optimization of ipath_intr() */
@@ -678,7 +723,12 @@
dd->ipath_sendctrl);
}
-static void handle_rcv(struct ipath_devdata *dd, u32 istat)
+/*
+ * Handle receive interrupts for user ports; this means a user
+ * process was waiting for a packet to arrive, and didn't want
+ * to poll
+ */
+static void handle_urcv(struct ipath_devdata *dd, u32 istat)
{
u64 portr;
int i;
@@ -688,22 +738,17 @@
infinipath_i_rcvavail_mask)
| ((istat >> INFINIPATH_I_RCVURG_SHIFT) &
infinipath_i_rcvurg_mask);
- for (i = 0; i < dd->ipath_cfgports; i++) {
+ for (i = 1; i < dd->ipath_cfgports; i++) {
struct ipath_portdata *pd = dd->ipath_pd[i];
- if (portr & (1 << i) && pd &&
- pd->port_cnt) {
- if (i == 0)
- ipath_kreceive(dd);
- else if (test_bit(IPATH_PORT_WAITING_RCV,
- &pd->port_flag)) {
- int rcbit;
- clear_bit(IPATH_PORT_WAITING_RCV,
- &pd->port_flag);
- rcbit = i + INFINIPATH_R_INTRAVAIL_SHIFT;
- clear_bit(1UL << rcbit, &dd->ipath_rcvctrl);
- wake_up_interruptible(&pd->port_wait);
- rcvdint = 1;
- }
+ if (portr & (1 << i) && pd && pd->port_cnt &&
+ test_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag)) {
+ int rcbit;
+ clear_bit(IPATH_PORT_WAITING_RCV,
+ &pd->port_flag);
+ rcbit = i + INFINIPATH_R_INTRAVAIL_SHIFT;
+ clear_bit(1UL << rcbit, &dd->ipath_rcvctrl);
+ wake_up_interruptible(&pd->port_wait);
+ rcvdint = 1;
}
}
if (rcvdint) {
@@ -719,16 +764,19 @@
irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
{
struct ipath_devdata *dd = data;
- u32 istat;
+ u32 istat, chk0rcv = 0;
ipath_err_t estat = 0;
- static unsigned unexpected = 0;
irqreturn_t ret;
+ u32 oldhead, curtail;
+ static unsigned unexpected = 0;
+ static const u32 port0rbits = (1U<<INFINIPATH_I_RCVAVAIL_SHIFT) |
+ (1U<<INFINIPATH_I_RCVURG_SHIFT);
- if(!(dd->ipath_flags & IPATH_PRESENT)) {
- /* this is mostly so we don't try to touch the chip while
- * it is being reset */
+ ipath_stats.sps_ints++;
+
+ if (!(dd->ipath_flags & IPATH_PRESENT)) {
/*
- * This return value is perhaps odd, but we do not want the
+ * This return value is not great, but we do not want the
* interrupt core code to remove our interrupt handler
* because we don't appear to be handling an interrupt
* during a chip reset.
@@ -736,21 +784,6 @@
return IRQ_HANDLED;
}
- istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
- if (unlikely(!istat)) {
- ipath_stats.sps_nullintr++;
- ret = IRQ_NONE; /* not our interrupt, or already handled */
- goto bail;
- }
- if (unlikely(istat == -1)) {
- ipath_bad_regread(dd);
- /* don't know if it was our interrupt or not */
- ret = IRQ_NONE;
- goto bail;
- }
-
- ipath_stats.sps_ints++;
-
/*
* this needs to be flags&initted, not statusp, so we keep
* taking interrupts even after link goes down, etc.
@@ -763,17 +796,62 @@
ret = IRQ_NONE;
goto bail;
}
+
+ /*
+ * We try to avoid reading the interrupt status register, since
+ * that's a PIO read, and stalls the processor for up to about
+ * ~0.25 usec. The idea is that if we processed a port0 packet,
+ * we blindly clear the port 0 receive interrupt bits, and nothing
+ * else, then return. If other interrupts are pending, the chip
+ * will re-interrupt us as soon as we write the intclear register.
+ * We then won't process any more kernel packets (if not the 2nd
+ * time, then the 3rd or 4th) and we'll then handle the other
+ * interrupts. We clear the interrupts first so that we don't
+ * lose intr for later packets that arrive while we are processing.
+ */
+ oldhead = dd->ipath_port0head;
+ curtail = (u32)le64_to_cpu(*dd->ipath_hdrqtailptr);
+ if (oldhead != curtail) {
+ if (dd->ipath_flags & IPATH_GPIO_INTR) {
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
+ (u64) (1 << 2));
+ istat = port0rbits | INFINIPATH_I_GPIO;
+ }
+ else
+ istat = port0rbits;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);
+ ipath_kreceive(dd);
+ if (oldhead != dd->ipath_port0head) {
+ ipath_stats.sps_fastrcvint++;
+ goto done;
+ }
+ }
+
+ istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
+
+ if (unlikely(!istat)) {
+ ipath_stats.sps_nullintr++;
+ ret = IRQ_NONE; /* not our interrupt, or already handled */
+ goto bail;
+ }
+ if (unlikely(istat == -1)) {
+ ipath_bad_regread(dd);
+ /* don't know if it was our interrupt or not */
+ ret = IRQ_NONE;
+ goto bail;
+ }
+
if (unexpected)
unexpected = 0;
- ipath_cdbg(VERBOSE, "intr stat=0x%x\n", istat);
-
- if (istat & ~infinipath_i_bitsextant)
+ if (unlikely(istat & ~infinipath_i_bitsextant))
ipath_dev_err(dd,
"interrupt with unknown interrupts %x set\n",
istat & (u32) ~ infinipath_i_bitsextant);
+ else
+ ipath_cdbg(VERBOSE, "intr stat=0x%x\n", istat);
- if (istat & INFINIPATH_I_ERROR) {
+ if (unlikely(istat & INFINIPATH_I_ERROR)) {
ipath_stats.sps_errints++;
estat = ipath_read_kreg64(dd,
dd->ipath_kregs->kr_errorstatus);
@@ -788,10 +866,18 @@
ipath_dev_err(dd, "Read of error status failed "
"(all bits set); ignoring\n");
else
- handle_errors(dd, estat);
+ if (handle_errors(dd, estat))
+ /* force calling ipath_kreceive() */
+ chk0rcv = 1;
}
if (istat & INFINIPATH_I_GPIO) {
+ /*
+ * Packets are available in the port 0 rcv queue.
+ * Eventually this needs to be generalized to check
+ * IPATH_GPIO_INTR, and the specific GPIO bit, if
+ * GPIO interrupts are used for anything else.
+ */
if (unlikely(!(dd->ipath_flags & IPATH_GPIO_INTR))) {
u32 gpiostatus;
gpiostatus = ipath_read_kreg32(
@@ -804,27 +890,39 @@
else {
/* Clear GPIO status bit 2 */
ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
- (u64) (1 << 2));
-
- /*
- * Packets are available in the port 0 rcv queue.
- * Eventually this needs to be generalized to check
- * IPATH_GPIO_INTR, and the specific GPIO bit, if
- * GPIO interrupts are used for anything else.
- */
- ipath_kreceive(dd);
+ (u64) (1 << 2));
+ chk0rcv = 1;
}
}
+ chk0rcv |= istat & port0rbits;
/*
- * clear the ones we will deal with on this round
- * We clear it early, mostly for receive interrupts, so we
- * know the chip will have seen this by the time we process
- * the queue, and will re-interrupt if necessary. The processor
- * itself won't take the interrupt again until we return.
+ * Clear the interrupt bits we found set, unless they are receive
+ * related, in which case we already cleared them above, and don't
+ * want to clear them again, because we might lose an interrupt.
+ * Clear it early, so we "know" know the chip will have seen this by
+ * the time we process the queue, and will re-interrupt if necessary.
+ * The processor itself won't take the interrupt again until we return.
*/
ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);
+ /*
+ * handle port0 receive before checking for pio buffers available,
+ * since receives can overflow; piobuf waiters can afford a few
+ * extra cycles, since they were waiting anyway, and user's waiting
+ * for receive are at the bottom.
+ */
+ if (chk0rcv) {
+ ipath_kreceive(dd);
+ istat &= ~port0rbits;
+ }
+
+ if (istat & ((infinipath_i_rcvavail_mask <<
+ INFINIPATH_I_RCVAVAIL_SHIFT)
+ | (infinipath_i_rcvurg_mask <<
+ INFINIPATH_I_RCVURG_SHIFT)))
+ handle_urcv(dd, istat);
+
if (istat & INFINIPATH_I_SPIOBUFAVAIL) {
clear_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl);
ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
@@ -836,17 +934,7 @@
handle_layer_pioavail(dd);
}
- /*
- * we check for both transition from empty to non-empty, and urgent
- * packets (those with the interrupt bit set in the header)
- */
-
- if (istat & ((infinipath_i_rcvavail_mask <<
- INFINIPATH_I_RCVAVAIL_SHIFT)
- | (infinipath_i_rcvurg_mask <<
- INFINIPATH_I_RCVURG_SHIFT)))
- handle_rcv(dd, istat);
-
+done:
ret = IRQ_HANDLED;
bail:
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 5d92d57..e9f374f 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -1,6 +1,7 @@
#ifndef _IPATH_KERNEL_H
#define _IPATH_KERNEL_H
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -61,9 +62,7 @@
/* rcvhdrq base, needs mmap before useful */
void *port_rcvhdrq;
/* kernel virtual address where hdrqtail is updated */
- u64 *port_rcvhdrtail_kvaddr;
- /* page * used for uaddr */
- struct page *port_rcvhdrtail_pagep;
+ volatile __le64 *port_rcvhdrtail_kvaddr;
/*
* temp buffer for expected send setup, allocated at open, instead
* of each setup call
@@ -78,11 +77,7 @@
dma_addr_t port_rcvegr_phys;
/* mmap of hdrq, must fit in 44 bits */
dma_addr_t port_rcvhdrq_phys;
- /*
- * the actual user address that we ipath_mlock'ed, so we can
- * ipath_munlock it at close
- */
- unsigned long port_rcvhdrtail_uaddr;
+ dma_addr_t port_rcvhdrqtailaddr_phys;
/*
* number of opens on this instance (0 or 1; ignoring forks, dup,
* etc. for now)
@@ -158,16 +153,10 @@
/* base of memory alloced for ipath_kregbase, for free */
u64 *ipath_kregalloc;
/*
- * version of kregbase that doesn't have high bits set (for 32 bit
- * programs, so mmap64 44 bit works)
- */
- u64 __iomem *ipath_kregvirt;
- /*
* virtual address where port0 rcvhdrqtail updated for this unit.
* only written to by the chip, not the driver.
*/
volatile __le64 *ipath_hdrqtailptr;
- dma_addr_t ipath_dma_addr;
/* ipath_cfgports pointers */
struct ipath_portdata **ipath_pd;
/* sk_buffs used by port 0 eager receive queue */
@@ -354,13 +343,17 @@
char *ipath_freezemsg;
/* pci access data structure */
struct pci_dev *pcidev;
- struct cdev *cdev;
- struct class_device *class_dev;
+ struct cdev *user_cdev;
+ struct cdev *diag_cdev;
+ struct class_device *user_class_dev;
+ struct class_device *diag_class_dev;
/* timer used to prevent stats overflow, error throttling, etc. */
struct timer_list ipath_stats_timer;
/* check for stale messages in rcv queue */
/* only allow one intr at a time. */
unsigned long ipath_rcv_pending;
+ void *ipath_dummy_hdrq; /* used after port close */
+ dma_addr_t ipath_dummy_hdrq_phys;
/*
* Shadow copies of registers; size indicates read access size.
@@ -500,8 +493,11 @@
u16 ipath_lid;
/* list of pkeys programmed; 0 if not set */
u16 ipath_pkeys[4];
- /* ASCII serial number, from flash */
- u8 ipath_serial[12];
+ /*
+ * ASCII serial number, from flash, large enough for original
+ * all digit strings, and longer QLogic serial number format
+ */
+ u8 ipath_serial[16];
/* human readable board version */
u8 ipath_boardversion[80];
/* chip major rev, from ipath_revision */
@@ -516,13 +512,13 @@
u8 ipath_pci_cacheline;
/* LID mask control */
u8 ipath_lmc;
+
+ /* local link integrity counter */
+ u32 ipath_lli_counter;
+ /* local link integrity errors */
+ u32 ipath_lli_errors;
};
-extern volatile __le64 *ipath_port0_rcvhdrtail;
-extern dma_addr_t ipath_port0_rcvhdrtail_dma;
-
-#define IPATH_PORT0_RCVHDRTAIL_SIZE PAGE_SIZE
-
extern struct list_head ipath_dev_list;
extern spinlock_t ipath_devs_lock;
extern struct ipath_devdata *ipath_lookup(int unit);
@@ -537,7 +533,7 @@
extern int __ipath_verbs_rcv(struct ipath_devdata *, void *, void *, u32);
void ipath_layer_add(struct ipath_devdata *);
-void ipath_layer_del(struct ipath_devdata *);
+void ipath_layer_remove(struct ipath_devdata *);
int ipath_init_chip(struct ipath_devdata *, int);
int ipath_enable_wc(struct ipath_devdata *dd);
@@ -551,14 +547,14 @@
void ipath_cdev_cleanup(struct cdev **cdevp,
struct class_device **class_devp);
-int ipath_diag_init(void);
-void ipath_diag_cleanup(void);
+int ipath_diag_add(struct ipath_devdata *);
+void ipath_diag_remove(struct ipath_devdata *);
void ipath_diag_bringup_link(struct ipath_devdata *);
extern wait_queue_head_t ipath_sma_state_wait;
int ipath_user_add(struct ipath_devdata *dd);
-void ipath_user_del(struct ipath_devdata *dd);
+void ipath_user_remove(struct ipath_devdata *dd);
struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd, gfp_t);
@@ -582,7 +578,7 @@
unsigned cnt);
int ipath_create_rcvhdrq(struct ipath_devdata *, struct ipath_portdata *);
-void ipath_free_pddata(struct ipath_devdata *, u32, int);
+void ipath_free_pddata(struct ipath_devdata *, struct ipath_portdata *);
int ipath_parse_ushort(const char *str, unsigned short *valp);
@@ -720,13 +716,8 @@
* @port: port number
*
* Return the contents of a register that is virtualized to be per port.
- * Prints a debug message and returns -1 on errors (not distinguishable from
- * valid contents at runtime; we may add a separate error variable at some
- * point).
- *
- * This is normally not used by the kernel, but may be for debugging, and
- * has a different implementation than user mode, which is why it's not in
- * _common.h.
+ * Returns -1 on errors (not distinguishable from valid contents at
+ * runtime; we may add a separate error variable at some point).
*/
static inline u32 ipath_read_ureg32(const struct ipath_devdata *dd,
ipath_ureg regno, int port)
@@ -842,9 +833,10 @@
#define IPATH_DRV_NAME "ipath_core"
#define IPATH_MAJOR 233
+#define IPATH_USER_MINOR_BASE 0
#define IPATH_SMA_MINOR 128
-#define IPATH_DIAG_MINOR 129
-#define IPATH_NMINORS 130
+#define IPATH_DIAG_MINOR_BASE 129
+#define IPATH_NMINORS 255
#define ipath_dev_err(dd,fmt,...) \
do { \
diff --git a/drivers/infiniband/hw/ipath/ipath_keys.c b/drivers/infiniband/hw/ipath/ipath_keys.c
index 5ae8761..46773c6 100644
--- a/drivers/infiniband/hw/ipath/ipath_keys.c
+++ b/drivers/infiniband/hw/ipath/ipath_keys.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -120,6 +121,7 @@
struct ib_sge *sge, int acc)
{
struct ipath_mregion *mr;
+ unsigned n, m;
size_t off;
int ret;
@@ -151,20 +153,22 @@
}
off += mr->offset;
- isge->mr = mr;
- isge->m = 0;
- isge->n = 0;
- while (off >= mr->map[isge->m]->segs[isge->n].length) {
- off -= mr->map[isge->m]->segs[isge->n].length;
- isge->n++;
- if (isge->n >= IPATH_SEGSZ) {
- isge->m++;
- isge->n = 0;
+ m = 0;
+ n = 0;
+ while (off >= mr->map[m]->segs[n].length) {
+ off -= mr->map[m]->segs[n].length;
+ n++;
+ if (n >= IPATH_SEGSZ) {
+ m++;
+ n = 0;
}
}
- isge->vaddr = mr->map[isge->m]->segs[isge->n].vaddr + off;
- isge->length = mr->map[isge->m]->segs[isge->n].length - off;
+ isge->mr = mr;
+ isge->vaddr = mr->map[m]->segs[n].vaddr + off;
+ isge->length = mr->map[m]->segs[n].length - off;
isge->sge_length = sge->length;
+ isge->m = m;
+ isge->n = n;
ret = 1;
@@ -189,6 +193,7 @@
struct ipath_lkey_table *rkt = &dev->lk_table;
struct ipath_sge *sge = &ss->sge;
struct ipath_mregion *mr;
+ unsigned n, m;
size_t off;
int ret;
@@ -206,20 +211,22 @@
}
off += mr->offset;
- sge->mr = mr;
- sge->m = 0;
- sge->n = 0;
- while (off >= mr->map[sge->m]->segs[sge->n].length) {
- off -= mr->map[sge->m]->segs[sge->n].length;
- sge->n++;
- if (sge->n >= IPATH_SEGSZ) {
- sge->m++;
- sge->n = 0;
+ m = 0;
+ n = 0;
+ while (off >= mr->map[m]->segs[n].length) {
+ off -= mr->map[m]->segs[n].length;
+ n++;
+ if (n >= IPATH_SEGSZ) {
+ m++;
+ n = 0;
}
}
- sge->vaddr = mr->map[sge->m]->segs[sge->n].vaddr + off;
- sge->length = mr->map[sge->m]->segs[sge->n].length - off;
+ sge->mr = mr;
+ sge->vaddr = mr->map[m]->segs[n].vaddr + off;
+ sge->length = mr->map[m]->segs[n].length - off;
sge->sge_length = len;
+ sge->m = m;
+ sge->n = n;
ss->sg_list = NULL;
ss->num_sge = 1;
diff --git a/drivers/infiniband/hw/ipath/ipath_layer.c b/drivers/infiniband/hw/ipath/ipath_layer.c
index 9ec4ac7..b28c6f8 100644
--- a/drivers/infiniband/hw/ipath/ipath_layer.c
+++ b/drivers/infiniband/hw/ipath/ipath_layer.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -40,8 +41,8 @@
#include <asm/byteorder.h>
#include "ipath_kernel.h"
-#include "ips_common.h"
#include "ipath_layer.h"
+#include "ipath_common.h"
/* Acquire before ipath_devs_lock. */
static DEFINE_MUTEX(ipath_layer_mutex);
@@ -299,9 +300,8 @@
EXPORT_SYMBOL_GPL(ipath_layer_set_mtu);
-int ipath_set_sps_lid(struct ipath_devdata *dd, u32 arg, u8 lmc)
+int ipath_set_lid(struct ipath_devdata *dd, u32 arg, u8 lmc)
{
- ipath_stats.sps_lid[dd->ipath_unit] = arg;
dd->ipath_lid = arg;
dd->ipath_lmc = lmc;
@@ -315,7 +315,7 @@
return 0;
}
-EXPORT_SYMBOL_GPL(ipath_set_sps_lid);
+EXPORT_SYMBOL_GPL(ipath_set_lid);
int ipath_layer_set_guid(struct ipath_devdata *dd, __be64 guid)
{
@@ -340,18 +340,26 @@
EXPORT_SYMBOL_GPL(ipath_layer_get_nguid);
-int ipath_layer_query_device(struct ipath_devdata *dd, u32 * vendor,
- u32 * boardrev, u32 * majrev, u32 * minrev)
+u32 ipath_layer_get_majrev(struct ipath_devdata *dd)
{
- *vendor = dd->ipath_vendorid;
- *boardrev = dd->ipath_boardrev;
- *majrev = dd->ipath_majrev;
- *minrev = dd->ipath_minrev;
-
- return 0;
+ return dd->ipath_majrev;
}
-EXPORT_SYMBOL_GPL(ipath_layer_query_device);
+EXPORT_SYMBOL_GPL(ipath_layer_get_majrev);
+
+u32 ipath_layer_get_minrev(struct ipath_devdata *dd)
+{
+ return dd->ipath_minrev;
+}
+
+EXPORT_SYMBOL_GPL(ipath_layer_get_minrev);
+
+u32 ipath_layer_get_pcirev(struct ipath_devdata *dd)
+{
+ return dd->ipath_pcirev;
+}
+
+EXPORT_SYMBOL_GPL(ipath_layer_get_pcirev);
u32 ipath_layer_get_flags(struct ipath_devdata *dd)
{
@@ -374,6 +382,13 @@
EXPORT_SYMBOL_GPL(ipath_layer_get_deviceid);
+u32 ipath_layer_get_vendorid(struct ipath_devdata *dd)
+{
+ return dd->ipath_vendorid;
+}
+
+EXPORT_SYMBOL_GPL(ipath_layer_get_vendorid);
+
u64 ipath_layer_get_lastibcstat(struct ipath_devdata *dd)
{
return dd->ipath_lastibcstat;
@@ -403,7 +418,7 @@
mutex_unlock(&ipath_layer_mutex);
}
-void ipath_layer_del(struct ipath_devdata *dd)
+void ipath_layer_remove(struct ipath_devdata *dd)
{
mutex_lock(&ipath_layer_mutex);
@@ -607,7 +622,7 @@
goto bail;
}
- ret = ipath_setrcvhdrsize(dd, NUM_OF_EXTRA_WORDS_IN_HEADER_QUEUE);
+ ret = ipath_setrcvhdrsize(dd, IPATH_HEADER_QUEUE_WORDS);
if (ret < 0)
goto bail;
@@ -616,9 +631,9 @@
if (*dd->ipath_statusp & IPATH_STATUS_IB_READY)
intval |= IPATH_LAYER_INT_IF_UP;
- if (ipath_stats.sps_lid[dd->ipath_unit])
+ if (dd->ipath_lid)
intval |= IPATH_LAYER_INT_LID;
- if (ipath_stats.sps_mlid[dd->ipath_unit])
+ if (dd->ipath_mlid)
intval |= IPATH_LAYER_INT_BCAST;
/*
* do this on open, in case low level is already up and
@@ -884,7 +899,7 @@
/**
* ipath_verbs_send - send a packet from the verbs layer
* @dd: the infinipath device
- * @hdrwords: the number of works in the header
+ * @hdrwords: the number of words in the header
* @hdr: the packet header
* @len: the length of the packet in bytes
* @ss: the SGE to send
@@ -1016,19 +1031,22 @@
ipath_snap_cntr(dd, dd->ipath_cregs->cr_ibsymbolerrcnt);
cntrs->link_error_recovery_counter =
ipath_snap_cntr(dd, dd->ipath_cregs->cr_iblinkerrrecovcnt);
+ /*
+ * The link downed counter counts when the other side downs the
+ * connection. We add in the number of times we downed the link
+ * due to local link integrity errors to compensate.
+ */
cntrs->link_downed_counter =
ipath_snap_cntr(dd, dd->ipath_cregs->cr_iblinkdowncnt);
cntrs->port_rcv_errors =
ipath_snap_cntr(dd, dd->ipath_cregs->cr_rxdroppktcnt) +
ipath_snap_cntr(dd, dd->ipath_cregs->cr_rcvovflcnt) +
ipath_snap_cntr(dd, dd->ipath_cregs->cr_portovflcnt) +
- ipath_snap_cntr(dd, dd->ipath_cregs->cr_errrcvflowctrlcnt) +
ipath_snap_cntr(dd, dd->ipath_cregs->cr_err_rlencnt) +
ipath_snap_cntr(dd, dd->ipath_cregs->cr_invalidrlencnt) +
ipath_snap_cntr(dd, dd->ipath_cregs->cr_erricrccnt) +
ipath_snap_cntr(dd, dd->ipath_cregs->cr_errvcrccnt) +
ipath_snap_cntr(dd, dd->ipath_cregs->cr_errlpcrccnt) +
- ipath_snap_cntr(dd, dd->ipath_cregs->cr_errlinkcnt) +
ipath_snap_cntr(dd, dd->ipath_cregs->cr_badformatcnt);
cntrs->port_rcv_remphys_errors =
ipath_snap_cntr(dd, dd->ipath_cregs->cr_rcvebpcnt);
@@ -1042,6 +1060,8 @@
ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktsendcnt);
cntrs->port_rcv_packets =
ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktrcvcnt);
+ cntrs->local_link_integrity_errors = dd->ipath_lli_errors;
+ cntrs->excessive_buffer_overrun_errors = 0; /* XXX */
ret = 0;
@@ -1086,10 +1106,10 @@
}
vlsllnh = *((__be16 *) hdr);
- if (vlsllnh != htons(IPS_LRH_BTH)) {
+ if (vlsllnh != htons(IPATH_LRH_BTH)) {
ipath_dbg("Warning: lrh[0] wrong (%x, not %x); "
"not sending\n", be16_to_cpu(vlsllnh),
- IPS_LRH_BTH);
+ IPATH_LRH_BTH);
ret = -EINVAL;
}
if (ret)
diff --git a/drivers/infiniband/hw/ipath/ipath_layer.h b/drivers/infiniband/hw/ipath/ipath_layer.h
index 6fefd15..7148509 100644
--- a/drivers/infiniband/hw/ipath/ipath_layer.h
+++ b/drivers/infiniband/hw/ipath/ipath_layer.h
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -54,6 +55,8 @@
u64 port_rcv_data;
u64 port_xmit_packets;
u64 port_rcv_packets;
+ u32 local_link_integrity_errors;
+ u32 excessive_buffer_overrun_errors;
};
/*
@@ -126,7 +129,7 @@
u32 ipath_layer_get_cr_errpkey(struct ipath_devdata *dd);
int ipath_layer_set_linkstate(struct ipath_devdata *dd, u8 state);
int ipath_layer_set_mtu(struct ipath_devdata *, u16);
-int ipath_set_sps_lid(struct ipath_devdata *, u32, u8);
+int ipath_set_lid(struct ipath_devdata *, u32, u8);
int ipath_layer_send_hdr(struct ipath_devdata *dd,
struct ether_header *hdr);
int ipath_verbs_send(struct ipath_devdata *dd, u32 hdrwords,
@@ -143,11 +146,13 @@
int ipath_layer_set_guid(struct ipath_devdata *, __be64 guid);
__be64 ipath_layer_get_guid(struct ipath_devdata *);
u32 ipath_layer_get_nguid(struct ipath_devdata *);
-int ipath_layer_query_device(struct ipath_devdata *, u32 * vendor,
- u32 * boardrev, u32 * majrev, u32 * minrev);
+u32 ipath_layer_get_majrev(struct ipath_devdata *);
+u32 ipath_layer_get_minrev(struct ipath_devdata *);
+u32 ipath_layer_get_pcirev(struct ipath_devdata *);
u32 ipath_layer_get_flags(struct ipath_devdata *dd);
struct device *ipath_layer_get_device(struct ipath_devdata *dd);
u16 ipath_layer_get_deviceid(struct ipath_devdata *dd);
+u32 ipath_layer_get_vendorid(struct ipath_devdata *);
u64 ipath_layer_get_lastibcstat(struct ipath_devdata *dd);
u32 ipath_layer_get_ibmtu(struct ipath_devdata *dd);
int ipath_layer_enable_timer(struct ipath_devdata *dd);
diff --git a/drivers/infiniband/hw/ipath/ipath_mad.c b/drivers/infiniband/hw/ipath/ipath_mad.c
index 1a9d0a2..d340234 100644
--- a/drivers/infiniband/hw/ipath/ipath_mad.c
+++ b/drivers/infiniband/hw/ipath/ipath_mad.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -34,7 +35,7 @@
#include "ipath_kernel.h"
#include "ipath_verbs.h"
-#include "ips_common.h"
+#include "ipath_common.h"
#define IB_SMP_UNSUP_VERSION __constant_htons(0x0004)
#define IB_SMP_UNSUP_METHOD __constant_htons(0x0008)
@@ -84,7 +85,7 @@
{
struct nodeinfo *nip = (struct nodeinfo *)&smp->data;
struct ipath_devdata *dd = to_idev(ibdev)->dd;
- u32 vendor, boardid, majrev, minrev;
+ u32 vendor, majrev, minrev;
if (smp->attr_mod)
smp->status |= IB_SMP_INVALID_FIELD;
@@ -104,9 +105,11 @@
nip->port_guid = nip->sys_guid;
nip->partition_cap = cpu_to_be16(ipath_layer_get_npkeys(dd));
nip->device_id = cpu_to_be16(ipath_layer_get_deviceid(dd));
- ipath_layer_query_device(dd, &vendor, &boardid, &majrev, &minrev);
+ majrev = ipath_layer_get_majrev(dd);
+ minrev = ipath_layer_get_minrev(dd);
nip->revision = cpu_to_be32((majrev << 16) | minrev);
nip->local_port_num = port;
+ vendor = ipath_layer_get_vendorid(dd);
nip->vendor_id[0] = 0;
nip->vendor_id[1] = vendor >> 8;
nip->vendor_id[2] = vendor;
@@ -215,7 +218,7 @@
/* P_KeyViolations are counted by hardware. */
pip->pkey_violations =
cpu_to_be16((ipath_layer_get_cr_errpkey(dev->dd) -
- dev->n_pkey_violations) & 0xFFFF);
+ dev->z_pkey_violations) & 0xFFFF);
pip->qkey_violations = cpu_to_be16(dev->qkey_violations);
/* Only the hardware GUID is supported for now */
pip->guid_cap = 1;
@@ -303,9 +306,9 @@
lid = be16_to_cpu(pip->lid);
if (lid != ipath_layer_get_lid(dev->dd)) {
/* Must be a valid unicast LID address. */
- if (lid == 0 || lid >= IPS_MULTICAST_LID_BASE)
+ if (lid == 0 || lid >= IPATH_MULTICAST_LID_BASE)
goto err;
- ipath_set_sps_lid(dev->dd, lid, pip->mkeyprot_resv_lmc & 7);
+ ipath_set_lid(dev->dd, lid, pip->mkeyprot_resv_lmc & 7);
event.event = IB_EVENT_LID_CHANGE;
ib_dispatch_event(&event);
}
@@ -313,7 +316,7 @@
smlid = be16_to_cpu(pip->sm_lid);
if (smlid != dev->sm_lid) {
/* Must be a valid unicast LID address. */
- if (smlid == 0 || smlid >= IPS_MULTICAST_LID_BASE)
+ if (smlid == 0 || smlid >= IPATH_MULTICAST_LID_BASE)
goto err;
dev->sm_lid = smlid;
event.event = IB_EVENT_SM_CHANGE;
@@ -389,7 +392,7 @@
* later.
*/
if (pip->pkey_violations == 0)
- dev->n_pkey_violations =
+ dev->z_pkey_violations =
ipath_layer_get_cr_errpkey(dev->dd);
if (pip->qkey_violations == 0)
@@ -610,6 +613,9 @@
#define IB_PMA_SEL_PORT_RCV_ERRORS __constant_htons(0x0008)
#define IB_PMA_SEL_PORT_RCV_REMPHYS_ERRORS __constant_htons(0x0010)
#define IB_PMA_SEL_PORT_XMIT_DISCARDS __constant_htons(0x0040)
+#define IB_PMA_SEL_LOCAL_LINK_INTEGRITY_ERRORS __constant_htons(0x0200)
+#define IB_PMA_SEL_EXCESSIVE_BUFFER_OVERRUNS __constant_htons(0x0400)
+#define IB_PMA_SEL_PORT_VL15_DROPPED __constant_htons(0x0800)
#define IB_PMA_SEL_PORT_XMIT_DATA __constant_htons(0x1000)
#define IB_PMA_SEL_PORT_RCV_DATA __constant_htons(0x2000)
#define IB_PMA_SEL_PORT_XMIT_PACKETS __constant_htons(0x4000)
@@ -844,18 +850,22 @@
ipath_layer_get_counters(dev->dd, &cntrs);
/* Adjust counters for any resets done. */
- cntrs.symbol_error_counter -= dev->n_symbol_error_counter;
+ cntrs.symbol_error_counter -= dev->z_symbol_error_counter;
cntrs.link_error_recovery_counter -=
- dev->n_link_error_recovery_counter;
- cntrs.link_downed_counter -= dev->n_link_downed_counter;
+ dev->z_link_error_recovery_counter;
+ cntrs.link_downed_counter -= dev->z_link_downed_counter;
cntrs.port_rcv_errors += dev->rcv_errors;
- cntrs.port_rcv_errors -= dev->n_port_rcv_errors;
- cntrs.port_rcv_remphys_errors -= dev->n_port_rcv_remphys_errors;
- cntrs.port_xmit_discards -= dev->n_port_xmit_discards;
- cntrs.port_xmit_data -= dev->n_port_xmit_data;
- cntrs.port_rcv_data -= dev->n_port_rcv_data;
- cntrs.port_xmit_packets -= dev->n_port_xmit_packets;
- cntrs.port_rcv_packets -= dev->n_port_rcv_packets;
+ cntrs.port_rcv_errors -= dev->z_port_rcv_errors;
+ cntrs.port_rcv_remphys_errors -= dev->z_port_rcv_remphys_errors;
+ cntrs.port_xmit_discards -= dev->z_port_xmit_discards;
+ cntrs.port_xmit_data -= dev->z_port_xmit_data;
+ cntrs.port_rcv_data -= dev->z_port_rcv_data;
+ cntrs.port_xmit_packets -= dev->z_port_xmit_packets;
+ cntrs.port_rcv_packets -= dev->z_port_rcv_packets;
+ cntrs.local_link_integrity_errors -=
+ dev->z_local_link_integrity_errors;
+ cntrs.excessive_buffer_overrun_errors -=
+ dev->z_excessive_buffer_overrun_errors;
memset(pmp->data, 0, sizeof(pmp->data));
@@ -893,6 +903,16 @@
else
p->port_xmit_discards =
cpu_to_be16((u16)cntrs.port_xmit_discards);
+ if (cntrs.local_link_integrity_errors > 0xFUL)
+ cntrs.local_link_integrity_errors = 0xFUL;
+ if (cntrs.excessive_buffer_overrun_errors > 0xFUL)
+ cntrs.excessive_buffer_overrun_errors = 0xFUL;
+ p->lli_ebor_errors = (cntrs.local_link_integrity_errors << 4) |
+ cntrs.excessive_buffer_overrun_errors;
+ if (dev->n_vl15_dropped > 0xFFFFUL)
+ p->vl15_dropped = __constant_cpu_to_be16(0xFFFF);
+ else
+ p->vl15_dropped = cpu_to_be16((u16)dev->n_vl15_dropped);
if (cntrs.port_xmit_data > 0xFFFFFFFFUL)
p->port_xmit_data = __constant_cpu_to_be32(0xFFFFFFFF);
else
@@ -928,10 +948,10 @@
&rpkts, &xwait);
/* Adjust counters for any resets done. */
- swords -= dev->n_port_xmit_data;
- rwords -= dev->n_port_rcv_data;
- spkts -= dev->n_port_xmit_packets;
- rpkts -= dev->n_port_rcv_packets;
+ swords -= dev->z_port_xmit_data;
+ rwords -= dev->z_port_rcv_data;
+ spkts -= dev->z_port_xmit_packets;
+ rpkts -= dev->z_port_rcv_packets;
memset(pmp->data, 0, sizeof(pmp->data));
@@ -967,37 +987,48 @@
ipath_layer_get_counters(dev->dd, &cntrs);
if (p->counter_select & IB_PMA_SEL_SYMBOL_ERROR)
- dev->n_symbol_error_counter = cntrs.symbol_error_counter;
+ dev->z_symbol_error_counter = cntrs.symbol_error_counter;
if (p->counter_select & IB_PMA_SEL_LINK_ERROR_RECOVERY)
- dev->n_link_error_recovery_counter =
+ dev->z_link_error_recovery_counter =
cntrs.link_error_recovery_counter;
if (p->counter_select & IB_PMA_SEL_LINK_DOWNED)
- dev->n_link_downed_counter = cntrs.link_downed_counter;
+ dev->z_link_downed_counter = cntrs.link_downed_counter;
if (p->counter_select & IB_PMA_SEL_PORT_RCV_ERRORS)
- dev->n_port_rcv_errors =
+ dev->z_port_rcv_errors =
cntrs.port_rcv_errors + dev->rcv_errors;
if (p->counter_select & IB_PMA_SEL_PORT_RCV_REMPHYS_ERRORS)
- dev->n_port_rcv_remphys_errors =
+ dev->z_port_rcv_remphys_errors =
cntrs.port_rcv_remphys_errors;
if (p->counter_select & IB_PMA_SEL_PORT_XMIT_DISCARDS)
- dev->n_port_xmit_discards = cntrs.port_xmit_discards;
+ dev->z_port_xmit_discards = cntrs.port_xmit_discards;
+
+ if (p->counter_select & IB_PMA_SEL_LOCAL_LINK_INTEGRITY_ERRORS)
+ dev->z_local_link_integrity_errors =
+ cntrs.local_link_integrity_errors;
+
+ if (p->counter_select & IB_PMA_SEL_EXCESSIVE_BUFFER_OVERRUNS)
+ dev->z_excessive_buffer_overrun_errors =
+ cntrs.excessive_buffer_overrun_errors;
+
+ if (p->counter_select & IB_PMA_SEL_PORT_VL15_DROPPED)
+ dev->n_vl15_dropped = 0;
if (p->counter_select & IB_PMA_SEL_PORT_XMIT_DATA)
- dev->n_port_xmit_data = cntrs.port_xmit_data;
+ dev->z_port_xmit_data = cntrs.port_xmit_data;
if (p->counter_select & IB_PMA_SEL_PORT_RCV_DATA)
- dev->n_port_rcv_data = cntrs.port_rcv_data;
+ dev->z_port_rcv_data = cntrs.port_rcv_data;
if (p->counter_select & IB_PMA_SEL_PORT_XMIT_PACKETS)
- dev->n_port_xmit_packets = cntrs.port_xmit_packets;
+ dev->z_port_xmit_packets = cntrs.port_xmit_packets;
if (p->counter_select & IB_PMA_SEL_PORT_RCV_PACKETS)
- dev->n_port_rcv_packets = cntrs.port_rcv_packets;
+ dev->z_port_rcv_packets = cntrs.port_rcv_packets;
return recv_pma_get_portcounters(pmp, ibdev, port);
}
@@ -1014,16 +1045,16 @@
&rpkts, &xwait);
if (p->counter_select & IB_PMA_SELX_PORT_XMIT_DATA)
- dev->n_port_xmit_data = swords;
+ dev->z_port_xmit_data = swords;
if (p->counter_select & IB_PMA_SELX_PORT_RCV_DATA)
- dev->n_port_rcv_data = rwords;
+ dev->z_port_rcv_data = rwords;
if (p->counter_select & IB_PMA_SELX_PORT_XMIT_PACKETS)
- dev->n_port_xmit_packets = spkts;
+ dev->z_port_xmit_packets = spkts;
if (p->counter_select & IB_PMA_SELX_PORT_RCV_PACKETS)
- dev->n_port_rcv_packets = rpkts;
+ dev->z_port_rcv_packets = rpkts;
if (p->counter_select & IB_PMA_SELX_PORT_UNI_XMIT_PACKETS)
dev->n_unicast_xmit = 0;
@@ -1272,32 +1303,8 @@
struct ib_wc *in_wc, struct ib_grh *in_grh,
struct ib_mad *in_mad, struct ib_mad *out_mad)
{
- struct ipath_ibdev *dev = to_idev(ibdev);
int ret;
- /*
- * Snapshot current HW counters to "clear" them.
- * This should be done when the driver is loaded except that for
- * some reason we get a zillion errors when brining up the link.
- */
- if (dev->rcv_errors == 0) {
- struct ipath_layer_counters cntrs;
-
- ipath_layer_get_counters(to_idev(ibdev)->dd, &cntrs);
- dev->rcv_errors++;
- dev->n_symbol_error_counter = cntrs.symbol_error_counter;
- dev->n_link_error_recovery_counter =
- cntrs.link_error_recovery_counter;
- dev->n_link_downed_counter = cntrs.link_downed_counter;
- dev->n_port_rcv_errors = cntrs.port_rcv_errors + 1;
- dev->n_port_rcv_remphys_errors =
- cntrs.port_rcv_remphys_errors;
- dev->n_port_xmit_discards = cntrs.port_xmit_discards;
- dev->n_port_xmit_data = cntrs.port_xmit_data;
- dev->n_port_rcv_data = cntrs.port_rcv_data;
- dev->n_port_xmit_packets = cntrs.port_xmit_packets;
- dev->n_port_rcv_packets = cntrs.port_rcv_packets;
- }
switch (in_mad->mad_hdr.mgmt_class) {
case IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE:
case IB_MGMT_CLASS_SUBN_LID_ROUTED:
diff --git a/drivers/infiniband/hw/ipath/ipath_mr.c b/drivers/infiniband/hw/ipath/ipath_mr.c
index 69ffec6..4ac31a5 100644
--- a/drivers/infiniband/hw/ipath/ipath_mr.c
+++ b/drivers/infiniband/hw/ipath/ipath_mr.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -169,6 +170,11 @@
int n, m, i;
struct ib_mr *ret;
+ if (region->length == 0) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+
n = 0;
list_for_each_entry(chunk, ®ion->chunk_list, list)
n += chunk->nents;
diff --git a/drivers/infiniband/hw/ipath/ipath_pe800.c b/drivers/infiniband/hw/ipath/ipath_pe800.c
index 02e8c75..b83f66d 100644
--- a/drivers/infiniband/hw/ipath/ipath_pe800.c
+++ b/drivers/infiniband/hw/ipath/ipath_pe800.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -44,7 +45,7 @@
/*
* This file contains all the chip-specific register information and
- * access functions for the PathScale PE800, the PCI-Express chip.
+ * access functions for the QLogic InfiniPath PE800, the PCI-Express chip.
*
* This lists the InfiniPath PE800 registers, in the actual chip layout.
* This structure should never be directly accessed.
@@ -532,7 +533,7 @@
if (n)
snprintf(name, namelen, "%s", n);
- if (dd->ipath_majrev != 4 || dd->ipath_minrev != 1) {
+ if (dd->ipath_majrev != 4 || !dd->ipath_minrev || dd->ipath_minrev>2) {
ipath_dev_err(dd, "Unsupported PE-800 revision %u.%u!\n",
dd->ipath_majrev, dd->ipath_minrev);
ret = 1;
diff --git a/drivers/infiniband/hw/ipath/ipath_qp.c b/drivers/infiniband/hw/ipath/ipath_qp.c
index 9f8855d9..83e557b 100644
--- a/drivers/infiniband/hw/ipath/ipath_qp.c
+++ b/drivers/infiniband/hw/ipath/ipath_qp.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -34,7 +35,7 @@
#include <linux/vmalloc.h>
#include "ipath_verbs.h"
-#include "ips_common.h"
+#include "ipath_common.h"
#define BITS_PER_PAGE (PAGE_SIZE*BITS_PER_BYTE)
#define BITS_PER_PAGE_MASK (BITS_PER_PAGE-1)
@@ -332,10 +333,11 @@
qp->remote_qpn = 0;
qp->qkey = 0;
qp->qp_access_flags = 0;
+ clear_bit(IPATH_S_BUSY, &qp->s_flags);
qp->s_hdrwords = 0;
qp->s_psn = 0;
qp->r_psn = 0;
- atomic_set(&qp->msn, 0);
+ qp->r_msn = 0;
if (qp->ibqp.qp_type == IB_QPT_RC) {
qp->s_state = IB_OPCODE_RC_SEND_LAST;
qp->r_state = IB_OPCODE_RC_SEND_LAST;
@@ -344,7 +346,8 @@
qp->r_state = IB_OPCODE_UC_SEND_LAST;
}
qp->s_ack_state = IB_OPCODE_RC_ACKNOWLEDGE;
- qp->s_nak_state = 0;
+ qp->r_ack_state = IB_OPCODE_RC_ACKNOWLEDGE;
+ qp->r_nak_state = 0;
qp->s_rnr_timeout = 0;
qp->s_head = 0;
qp->s_tail = 0;
@@ -362,10 +365,10 @@
* @qp: the QP to put into an error state
*
* Flushes both send and receive work queues.
- * QP r_rq.lock and s_lock should be held.
+ * QP s_lock should be held and interrupts disabled.
*/
-static void ipath_error_qp(struct ipath_qp *qp)
+void ipath_error_qp(struct ipath_qp *qp)
{
struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
struct ib_wc wc;
@@ -408,12 +411,14 @@
qp->s_ack_state = IB_OPCODE_RC_ACKNOWLEDGE;
wc.opcode = IB_WC_RECV;
+ spin_lock(&qp->r_rq.lock);
while (qp->r_rq.tail != qp->r_rq.head) {
wc.wr_id = get_rwqe_ptr(&qp->r_rq, qp->r_rq.tail)->wr_id;
if (++qp->r_rq.tail >= qp->r_rq.size)
qp->r_rq.tail = 0;
ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
}
+ spin_unlock(&qp->r_rq.lock);
}
/**
@@ -433,8 +438,7 @@
unsigned long flags;
int ret;
- spin_lock_irqsave(&qp->r_rq.lock, flags);
- spin_lock(&qp->s_lock);
+ spin_lock_irqsave(&qp->s_lock, flags);
cur_state = attr_mask & IB_QP_CUR_STATE ?
attr->cur_qp_state : qp->state;
@@ -446,7 +450,7 @@
if (attr_mask & IB_QP_AV)
if (attr->ah_attr.dlid == 0 ||
- attr->ah_attr.dlid >= IPS_MULTICAST_LID_BASE)
+ attr->ah_attr.dlid >= IPATH_MULTICAST_LID_BASE)
goto inval;
if (attr_mask & IB_QP_PKEY_INDEX)
@@ -505,34 +509,19 @@
}
if (attr_mask & IB_QP_MIN_RNR_TIMER)
- qp->s_min_rnr_timer = attr->min_rnr_timer;
+ qp->r_min_rnr_timer = attr->min_rnr_timer;
if (attr_mask & IB_QP_QKEY)
qp->qkey = attr->qkey;
- if (attr_mask & IB_QP_PKEY_INDEX)
- qp->s_pkey_index = attr->pkey_index;
-
qp->state = new_state;
- spin_unlock(&qp->s_lock);
- spin_unlock_irqrestore(&qp->r_rq.lock, flags);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
- /*
- * If QP1 changed to the RTS state, try to move to the link to INIT
- * even if it was ACTIVE so the SM will reinitialize the SMA's
- * state.
- */
- if (qp->ibqp.qp_num == 1 && new_state == IB_QPS_RTS) {
- struct ipath_ibdev *dev = to_idev(ibqp->device);
-
- ipath_layer_set_linkstate(dev->dd, IPATH_IB_LINKDOWN);
- }
ret = 0;
goto bail;
inval:
- spin_unlock(&qp->s_lock);
- spin_unlock_irqrestore(&qp->r_rq.lock, flags);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
ret = -EINVAL;
bail:
@@ -566,7 +555,7 @@
attr->sq_draining = 0;
attr->max_rd_atomic = 1;
attr->max_dest_rd_atomic = 1;
- attr->min_rnr_timer = qp->s_min_rnr_timer;
+ attr->min_rnr_timer = qp->r_min_rnr_timer;
attr->port_num = 1;
attr->timeout = 0;
attr->retry_cnt = qp->s_retry_cnt;
@@ -593,21 +582,17 @@
* @qp: the queue pair to compute the AETH for
*
* Returns the AETH.
- *
- * The QP s_lock should be held.
*/
__be32 ipath_compute_aeth(struct ipath_qp *qp)
{
- u32 aeth = atomic_read(&qp->msn) & IPS_MSN_MASK;
+ u32 aeth = qp->r_msn & IPATH_MSN_MASK;
- if (qp->s_nak_state) {
- aeth |= qp->s_nak_state << IPS_AETH_CREDIT_SHIFT;
- } else if (qp->ibqp.srq) {
+ if (qp->ibqp.srq) {
/*
* Shared receive queues don't generate credits.
* Set the credit field to the invalid value.
*/
- aeth |= IPS_AETH_CREDIT_INVAL << IPS_AETH_CREDIT_SHIFT;
+ aeth |= IPATH_AETH_CREDIT_INVAL << IPATH_AETH_CREDIT_SHIFT;
} else {
u32 min, max, x;
u32 credits;
@@ -637,7 +622,7 @@
else
min = x;
}
- aeth |= x << IPS_AETH_CREDIT_SHIFT;
+ aeth |= x << IPATH_AETH_CREDIT_SHIFT;
}
return cpu_to_be32(aeth);
}
@@ -663,12 +648,22 @@
size_t sz;
struct ib_qp *ret;
- if (init_attr->cap.max_send_sge > 255 ||
- init_attr->cap.max_recv_sge > 255) {
+ if (init_attr->cap.max_send_sge > ib_ipath_max_sges ||
+ init_attr->cap.max_recv_sge > ib_ipath_max_sges ||
+ init_attr->cap.max_send_wr > ib_ipath_max_qp_wrs ||
+ init_attr->cap.max_recv_wr > ib_ipath_max_qp_wrs) {
ret = ERR_PTR(-ENOMEM);
goto bail;
}
+ if (init_attr->cap.max_send_sge +
+ init_attr->cap.max_recv_sge +
+ init_attr->cap.max_send_wr +
+ init_attr->cap.max_recv_wr == 0) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+
switch (init_attr->qp_type) {
case IB_QPT_UC:
case IB_QPT_RC:
@@ -686,18 +681,26 @@
case IB_QPT_GSI:
qp = kmalloc(sizeof(*qp), GFP_KERNEL);
if (!qp) {
+ vfree(swq);
ret = ERR_PTR(-ENOMEM);
goto bail;
}
- qp->r_rq.size = init_attr->cap.max_recv_wr + 1;
- sz = sizeof(struct ipath_sge) *
- init_attr->cap.max_recv_sge +
- sizeof(struct ipath_rwqe);
- qp->r_rq.wq = vmalloc(qp->r_rq.size * sz);
- if (!qp->r_rq.wq) {
- kfree(qp);
- ret = ERR_PTR(-ENOMEM);
- goto bail;
+ if (init_attr->srq) {
+ qp->r_rq.size = 0;
+ qp->r_rq.max_sge = 0;
+ qp->r_rq.wq = NULL;
+ } else {
+ qp->r_rq.size = init_attr->cap.max_recv_wr + 1;
+ qp->r_rq.max_sge = init_attr->cap.max_recv_sge;
+ sz = (sizeof(struct ipath_sge) * qp->r_rq.max_sge) +
+ sizeof(struct ipath_rwqe);
+ qp->r_rq.wq = vmalloc(qp->r_rq.size * sz);
+ if (!qp->r_rq.wq) {
+ kfree(qp);
+ vfree(swq);
+ ret = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
}
/*
@@ -708,9 +711,7 @@
spin_lock_init(&qp->r_rq.lock);
atomic_set(&qp->refcount, 0);
init_waitqueue_head(&qp->wait);
- tasklet_init(&qp->s_task,
- init_attr->qp_type == IB_QPT_RC ?
- ipath_do_rc_send : ipath_do_uc_send,
+ tasklet_init(&qp->s_task, ipath_do_ruc_send,
(unsigned long)qp);
INIT_LIST_HEAD(&qp->piowait);
INIT_LIST_HEAD(&qp->timerwait);
@@ -718,7 +719,6 @@
qp->s_wq = swq;
qp->s_size = init_attr->cap.max_send_wr + 1;
qp->s_max_sge = init_attr->cap.max_send_sge;
- qp->r_rq.max_sge = init_attr->cap.max_recv_sge;
qp->s_flags = init_attr->sq_sig_type == IB_SIGNAL_REQ_WR ?
1 << IPATH_S_SIGNAL_REQ_WR : 0;
dev = to_idev(ibpd->device);
@@ -888,18 +888,18 @@
*/
void ipath_get_credit(struct ipath_qp *qp, u32 aeth)
{
- u32 credit = (aeth >> IPS_AETH_CREDIT_SHIFT) & IPS_AETH_CREDIT_MASK;
+ u32 credit = (aeth >> IPATH_AETH_CREDIT_SHIFT) & IPATH_AETH_CREDIT_MASK;
/*
* If the credit is invalid, we can send
* as many packets as we like. Otherwise, we have to
* honor the credit field.
*/
- if (credit == IPS_AETH_CREDIT_INVAL) {
+ if (credit == IPATH_AETH_CREDIT_INVAL)
qp->s_lsn = (u32) -1;
- } else if (qp->s_lsn != (u32) -1) {
+ else if (qp->s_lsn != (u32) -1) {
/* Compute new LSN (i.e., MSN + credit) */
- credit = (aeth + credit_table[credit]) & IPS_MSN_MASK;
+ credit = (aeth + credit_table[credit]) & IPATH_MSN_MASK;
if (ipath_cmp24(credit, qp->s_lsn) > 0)
qp->s_lsn = credit;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_rc.c b/drivers/infiniband/hw/ipath/ipath_rc.c
index 493b182..774d161 100644
--- a/drivers/infiniband/hw/ipath/ipath_rc.c
+++ b/drivers/infiniband/hw/ipath/ipath_rc.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -31,7 +32,7 @@
*/
#include "ipath_verbs.h"
-#include "ips_common.h"
+#include "ipath_common.h"
/* cut down ridiculously long IB macro names */
#define OP(x) IB_OPCODE_RC_##x
@@ -41,14 +42,14 @@
* @qp: the QP who's SGE we're restarting
* @wqe: the work queue to initialize the QP's SGE from
*
- * The QP s_lock should be held.
+ * The QP s_lock should be held and interrupts disabled.
*/
static void ipath_init_restart(struct ipath_qp *qp, struct ipath_swqe *wqe)
{
struct ipath_ibdev *dev;
u32 len;
- len = ((qp->s_psn - wqe->psn) & IPS_PSN_MASK) *
+ len = ((qp->s_psn - wqe->psn) & IPATH_PSN_MASK) *
ib_mtu_enum_to_int(qp->path_mtu);
qp->s_sge.sge = wqe->sg_list[0];
qp->s_sge.sg_list = wqe->sg_list + 1;
@@ -72,11 +73,10 @@
* Return bth0 if constructed; otherwise, return 0.
* Note the QP s_lock must be held.
*/
-static inline u32 ipath_make_rc_ack(struct ipath_qp *qp,
- struct ipath_other_headers *ohdr,
- u32 pmtu)
+u32 ipath_make_rc_ack(struct ipath_qp *qp,
+ struct ipath_other_headers *ohdr,
+ u32 pmtu)
{
- struct ipath_sge_state *ss;
u32 hwords;
u32 len;
u32 bth0;
@@ -90,13 +90,12 @@
*/
switch (qp->s_ack_state) {
case OP(RDMA_READ_REQUEST):
- ss = &qp->s_rdma_sge;
+ qp->s_cur_sge = &qp->s_rdma_sge;
len = qp->s_rdma_len;
if (len > pmtu) {
len = pmtu;
qp->s_ack_state = OP(RDMA_READ_RESPONSE_FIRST);
- }
- else
+ } else
qp->s_ack_state = OP(RDMA_READ_RESPONSE_ONLY);
qp->s_rdma_len -= len;
bth0 = qp->s_ack_state << 24;
@@ -108,7 +107,7 @@
qp->s_ack_state = OP(RDMA_READ_RESPONSE_MIDDLE);
/* FALLTHROUGH */
case OP(RDMA_READ_RESPONSE_MIDDLE):
- ss = &qp->s_rdma_sge;
+ qp->s_cur_sge = &qp->s_rdma_sge;
len = qp->s_rdma_len;
if (len > pmtu)
len = pmtu;
@@ -127,41 +126,50 @@
* We have to prevent new requests from changing
* the r_sge state while a ipath_verbs_send()
* is in progress.
- * Changing r_state allows the receiver
- * to continue processing new packets.
- * We do it here now instead of above so
- * that we are sure the packet was sent before
- * changing the state.
*/
- qp->r_state = OP(RDMA_READ_RESPONSE_LAST);
qp->s_ack_state = OP(ACKNOWLEDGE);
- return 0;
+ bth0 = 0;
+ goto bail;
case OP(COMPARE_SWAP):
case OP(FETCH_ADD):
- ss = NULL;
+ qp->s_cur_sge = NULL;
len = 0;
- qp->r_state = OP(SEND_LAST);
- qp->s_ack_state = OP(ACKNOWLEDGE);
- bth0 = IB_OPCODE_ATOMIC_ACKNOWLEDGE << 24;
+ /*
+ * Set the s_ack_state so the receive interrupt handler
+ * won't try to send an ACK (out of order) until this one
+ * is actually sent.
+ */
+ qp->s_ack_state = OP(RDMA_READ_RESPONSE_LAST);
+ bth0 = OP(ATOMIC_ACKNOWLEDGE) << 24;
ohdr->u.at.aeth = ipath_compute_aeth(qp);
- ohdr->u.at.atomic_ack_eth = cpu_to_be64(qp->s_ack_atomic);
+ ohdr->u.at.atomic_ack_eth = cpu_to_be64(qp->r_atomic_data);
hwords += sizeof(ohdr->u.at) / 4;
break;
default:
/* Send a regular ACK. */
- ss = NULL;
+ qp->s_cur_sge = NULL;
len = 0;
- qp->s_ack_state = OP(ACKNOWLEDGE);
- bth0 = qp->s_ack_state << 24;
- ohdr->u.aeth = ipath_compute_aeth(qp);
+ /*
+ * Set the s_ack_state so the receive interrupt handler
+ * won't try to send an ACK (out of order) until this one
+ * is actually sent.
+ */
+ qp->s_ack_state = OP(RDMA_READ_RESPONSE_LAST);
+ bth0 = OP(ACKNOWLEDGE) << 24;
+ if (qp->s_nak_state)
+ ohdr->u.aeth = cpu_to_be32((qp->r_msn & IPATH_MSN_MASK) |
+ (qp->s_nak_state <<
+ IPATH_AETH_CREDIT_SHIFT));
+ else
+ ohdr->u.aeth = ipath_compute_aeth(qp);
hwords++;
}
qp->s_hdrwords = hwords;
- qp->s_cur_sge = ss;
qp->s_cur_size = len;
+bail:
return bth0;
}
@@ -174,11 +182,11 @@
* @bth2p: pointer to the BTH PSN word
*
* Return 1 if constructed; otherwise, return 0.
- * Note the QP s_lock must be held.
+ * Note the QP s_lock must be held and interrupts disabled.
*/
-static inline int ipath_make_rc_req(struct ipath_qp *qp,
- struct ipath_other_headers *ohdr,
- u32 pmtu, u32 *bth0p, u32 *bth2p)
+int ipath_make_rc_req(struct ipath_qp *qp,
+ struct ipath_other_headers *ohdr,
+ u32 pmtu, u32 *bth0p, u32 *bth2p)
{
struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
struct ipath_sge_state *ss;
@@ -257,7 +265,7 @@
break;
case IB_WR_RDMA_WRITE:
- if (newreq)
+ if (newreq && qp->s_lsn != (u32) -1)
qp->s_lsn++;
/* FALLTHROUGH */
case IB_WR_RDMA_WRITE_WITH_IMM:
@@ -283,8 +291,7 @@
else {
qp->s_state =
OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE);
- /* Immediate data comes
- * after RETH */
+ /* Immediate data comes after RETH */
ohdr->u.rc.imm_data = wqe->wr.imm_data;
hwords += 1;
if (wqe->wr.send_flags & IB_SEND_SOLICITED)
@@ -304,7 +311,8 @@
qp->s_state = OP(RDMA_READ_REQUEST);
hwords += sizeof(ohdr->u.rc.reth) / 4;
if (newreq) {
- qp->s_lsn++;
+ if (qp->s_lsn != (u32) -1)
+ qp->s_lsn++;
/*
* Adjust s_next_psn to count the
* expected number of responses.
@@ -335,7 +343,8 @@
wqe->wr.wr.atomic.compare_add);
hwords += sizeof(struct ib_atomic_eth) / 4;
if (newreq) {
- qp->s_lsn++;
+ if (qp->s_lsn != (u32) -1)
+ qp->s_lsn++;
wqe->lpsn = wqe->psn;
}
if (++qp->s_cur == qp->s_size)
@@ -352,9 +361,14 @@
if (qp->s_tail >= qp->s_size)
qp->s_tail = 0;
}
- bth2 |= qp->s_psn++ & IPS_PSN_MASK;
+ bth2 |= qp->s_psn++ & IPATH_PSN_MASK;
if ((int)(qp->s_psn - qp->s_next_psn) > 0)
qp->s_next_psn = qp->s_psn;
+ /*
+ * Put the QP on the pending list so lost ACKs will cause
+ * a retry. More than one request can be pending so the
+ * QP may already be on the dev->pending list.
+ */
spin_lock(&dev->pending_lock);
if (list_empty(&qp->timerwait))
list_add_tail(&qp->timerwait,
@@ -364,8 +378,8 @@
case OP(RDMA_READ_RESPONSE_FIRST):
/*
- * This case can only happen if a send is restarted. See
- * ipath_restart_rc().
+ * This case can only happen if a send is restarted.
+ * See ipath_restart_rc().
*/
ipath_init_restart(qp, wqe);
/* FALLTHROUGH */
@@ -373,7 +387,7 @@
qp->s_state = OP(SEND_MIDDLE);
/* FALLTHROUGH */
case OP(SEND_MIDDLE):
- bth2 = qp->s_psn++ & IPS_PSN_MASK;
+ bth2 = qp->s_psn++ & IPATH_PSN_MASK;
if ((int)(qp->s_psn - qp->s_next_psn) > 0)
qp->s_next_psn = qp->s_psn;
ss = &qp->s_sge;
@@ -415,7 +429,7 @@
qp->s_state = OP(RDMA_WRITE_MIDDLE);
/* FALLTHROUGH */
case OP(RDMA_WRITE_MIDDLE):
- bth2 = qp->s_psn++ & IPS_PSN_MASK;
+ bth2 = qp->s_psn++ & IPATH_PSN_MASK;
if ((int)(qp->s_psn - qp->s_next_psn) > 0)
qp->s_next_psn = qp->s_psn;
ss = &qp->s_sge;
@@ -452,7 +466,7 @@
* See ipath_restart_rc().
*/
ipath_init_restart(qp, wqe);
- len = ((qp->s_psn - wqe->psn) & IPS_PSN_MASK) * pmtu;
+ len = ((qp->s_psn - wqe->psn) & IPATH_PSN_MASK) * pmtu;
ohdr->u.rc.reth.vaddr =
cpu_to_be64(wqe->wr.wr.rdma.remote_addr + len);
ohdr->u.rc.reth.rkey =
@@ -460,7 +474,7 @@
ohdr->u.rc.reth.length = cpu_to_be32(qp->s_len);
qp->s_state = OP(RDMA_READ_REQUEST);
hwords += sizeof(ohdr->u.rc.reth) / 4;
- bth2 = qp->s_psn++ & IPS_PSN_MASK;
+ bth2 = qp->s_psn++ & IPATH_PSN_MASK;
if ((int)(qp->s_psn - qp->s_next_psn) > 0)
qp->s_next_psn = qp->s_psn;
ss = NULL;
@@ -496,204 +510,183 @@
return 0;
}
-static inline void ipath_make_rc_grh(struct ipath_qp *qp,
- struct ib_global_route *grh,
- u32 nwords)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
-
- /* GRH header size in 32-bit words. */
- qp->s_hdrwords += 10;
- qp->s_hdr.u.l.grh.version_tclass_flow =
- cpu_to_be32((6 << 28) |
- (grh->traffic_class << 20) |
- grh->flow_label);
- qp->s_hdr.u.l.grh.paylen =
- cpu_to_be16(((qp->s_hdrwords - 12) + nwords +
- SIZE_OF_CRC) << 2);
- /* next_hdr is defined by C8-7 in ch. 8.4.1 */
- qp->s_hdr.u.l.grh.next_hdr = 0x1B;
- qp->s_hdr.u.l.grh.hop_limit = grh->hop_limit;
- /* The SGID is 32-bit aligned. */
- qp->s_hdr.u.l.grh.sgid.global.subnet_prefix = dev->gid_prefix;
- qp->s_hdr.u.l.grh.sgid.global.interface_id =
- ipath_layer_get_guid(dev->dd);
- qp->s_hdr.u.l.grh.dgid = grh->dgid;
-}
-
/**
- * ipath_do_rc_send - perform a send on an RC QP
- * @data: contains a pointer to the QP
+ * send_rc_ack - Construct an ACK packet and send it
+ * @qp: a pointer to the QP
*
- * Process entries in the send work queue until credit or queue is
- * exhausted. Only allow one CPU to send a packet per QP (tasklet).
- * Otherwise, after we drop the QP s_lock, two threads could send
- * packets out of order.
+ * This is called from ipath_rc_rcv() and only uses the receive
+ * side QP state.
+ * Note that RDMA reads are handled in the send side QP state and tasklet.
*/
-void ipath_do_rc_send(unsigned long data)
-{
- struct ipath_qp *qp = (struct ipath_qp *)data;
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- unsigned long flags;
- u16 lrh0;
- u32 nwords;
- u32 extra_bytes;
- u32 bth0;
- u32 bth2;
- u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
- struct ipath_other_headers *ohdr;
-
- if (test_and_set_bit(IPATH_S_BUSY, &qp->s_flags))
- goto bail;
-
- if (unlikely(qp->remote_ah_attr.dlid ==
- ipath_layer_get_lid(dev->dd))) {
- struct ib_wc wc;
-
- /*
- * Pass in an uninitialized ib_wc to be consistent with
- * other places where ipath_ruc_loopback() is called.
- */
- ipath_ruc_loopback(qp, &wc);
- goto clear;
- }
-
- ohdr = &qp->s_hdr.u.oth;
- if (qp->remote_ah_attr.ah_flags & IB_AH_GRH)
- ohdr = &qp->s_hdr.u.l.oth;
-
-again:
- /* Check for a constructed packet to be sent. */
- if (qp->s_hdrwords != 0) {
- /*
- * If no PIO bufs are available, return. An interrupt will
- * call ipath_ib_piobufavail() when one is available.
- */
- _VERBS_INFO("h %u %p\n", qp->s_hdrwords, &qp->s_hdr);
- _VERBS_INFO("d %u %p %u %p %u %u %u %u\n", qp->s_cur_size,
- qp->s_cur_sge->sg_list,
- qp->s_cur_sge->num_sge,
- qp->s_cur_sge->sge.vaddr,
- qp->s_cur_sge->sge.sge_length,
- qp->s_cur_sge->sge.length,
- qp->s_cur_sge->sge.m,
- qp->s_cur_sge->sge.n);
- if (ipath_verbs_send(dev->dd, qp->s_hdrwords,
- (u32 *) &qp->s_hdr, qp->s_cur_size,
- qp->s_cur_sge)) {
- ipath_no_bufs_available(qp, dev);
- goto bail;
- }
- dev->n_unicast_xmit++;
- /* Record that we sent the packet and s_hdr is empty. */
- qp->s_hdrwords = 0;
- }
-
- /*
- * The lock is needed to synchronize between setting
- * qp->s_ack_state, resend timer, and post_send().
- */
- spin_lock_irqsave(&qp->s_lock, flags);
-
- /* Sending responses has higher priority over sending requests. */
- if (qp->s_ack_state != OP(ACKNOWLEDGE) &&
- (bth0 = ipath_make_rc_ack(qp, ohdr, pmtu)) != 0)
- bth2 = qp->s_ack_psn++ & IPS_PSN_MASK;
- else if (!ipath_make_rc_req(qp, ohdr, pmtu, &bth0, &bth2))
- goto done;
-
- spin_unlock_irqrestore(&qp->s_lock, flags);
-
- /* Construct the header. */
- extra_bytes = (4 - qp->s_cur_size) & 3;
- nwords = (qp->s_cur_size + extra_bytes) >> 2;
- lrh0 = IPS_LRH_BTH;
- if (unlikely(qp->remote_ah_attr.ah_flags & IB_AH_GRH)) {
- ipath_make_rc_grh(qp, &qp->remote_ah_attr.grh, nwords);
- lrh0 = IPS_LRH_GRH;
- }
- lrh0 |= qp->remote_ah_attr.sl << 4;
- qp->s_hdr.lrh[0] = cpu_to_be16(lrh0);
- qp->s_hdr.lrh[1] = cpu_to_be16(qp->remote_ah_attr.dlid);
- qp->s_hdr.lrh[2] = cpu_to_be16(qp->s_hdrwords + nwords +
- SIZE_OF_CRC);
- qp->s_hdr.lrh[3] = cpu_to_be16(ipath_layer_get_lid(dev->dd));
- bth0 |= ipath_layer_get_pkey(dev->dd, qp->s_pkey_index);
- bth0 |= extra_bytes << 20;
- ohdr->bth[0] = cpu_to_be32(bth0);
- ohdr->bth[1] = cpu_to_be32(qp->remote_qpn);
- ohdr->bth[2] = cpu_to_be32(bth2);
-
- /* Check for more work to do. */
- goto again;
-
-done:
- spin_unlock_irqrestore(&qp->s_lock, flags);
-clear:
- clear_bit(IPATH_S_BUSY, &qp->s_flags);
-bail:
- return;
-}
-
static void send_rc_ack(struct ipath_qp *qp)
{
struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
u16 lrh0;
u32 bth0;
+ u32 hwords;
+ struct ipath_ib_header hdr;
struct ipath_other_headers *ohdr;
/* Construct the header. */
- ohdr = &qp->s_hdr.u.oth;
- lrh0 = IPS_LRH_BTH;
+ ohdr = &hdr.u.oth;
+ lrh0 = IPATH_LRH_BTH;
/* header size in 32-bit words LRH+BTH+AETH = (8+12+4)/4. */
- qp->s_hdrwords = 6;
+ hwords = 6;
if (unlikely(qp->remote_ah_attr.ah_flags & IB_AH_GRH)) {
- ipath_make_rc_grh(qp, &qp->remote_ah_attr.grh, 0);
- ohdr = &qp->s_hdr.u.l.oth;
- lrh0 = IPS_LRH_GRH;
+ hwords += ipath_make_grh(dev, &hdr.u.l.grh,
+ &qp->remote_ah_attr.grh,
+ hwords, 0);
+ ohdr = &hdr.u.l.oth;
+ lrh0 = IPATH_LRH_GRH;
}
+ /* read pkey_index w/o lock (its atomic) */
bth0 = ipath_layer_get_pkey(dev->dd, qp->s_pkey_index);
- ohdr->u.aeth = ipath_compute_aeth(qp);
- if (qp->s_ack_state >= OP(COMPARE_SWAP)) {
- bth0 |= IB_OPCODE_ATOMIC_ACKNOWLEDGE << 24;
- ohdr->u.at.atomic_ack_eth = cpu_to_be64(qp->s_ack_atomic);
- qp->s_hdrwords += sizeof(ohdr->u.at.atomic_ack_eth) / 4;
- }
+ if (qp->r_nak_state)
+ ohdr->u.aeth = cpu_to_be32((qp->r_msn & IPATH_MSN_MASK) |
+ (qp->r_nak_state <<
+ IPATH_AETH_CREDIT_SHIFT));
else
+ ohdr->u.aeth = ipath_compute_aeth(qp);
+ if (qp->r_ack_state >= OP(COMPARE_SWAP)) {
+ bth0 |= OP(ATOMIC_ACKNOWLEDGE) << 24;
+ ohdr->u.at.atomic_ack_eth = cpu_to_be64(qp->r_atomic_data);
+ hwords += sizeof(ohdr->u.at.atomic_ack_eth) / 4;
+ } else
bth0 |= OP(ACKNOWLEDGE) << 24;
lrh0 |= qp->remote_ah_attr.sl << 4;
- qp->s_hdr.lrh[0] = cpu_to_be16(lrh0);
- qp->s_hdr.lrh[1] = cpu_to_be16(qp->remote_ah_attr.dlid);
- qp->s_hdr.lrh[2] = cpu_to_be16(qp->s_hdrwords + SIZE_OF_CRC);
- qp->s_hdr.lrh[3] = cpu_to_be16(ipath_layer_get_lid(dev->dd));
+ hdr.lrh[0] = cpu_to_be16(lrh0);
+ hdr.lrh[1] = cpu_to_be16(qp->remote_ah_attr.dlid);
+ hdr.lrh[2] = cpu_to_be16(hwords + SIZE_OF_CRC);
+ hdr.lrh[3] = cpu_to_be16(ipath_layer_get_lid(dev->dd));
ohdr->bth[0] = cpu_to_be32(bth0);
ohdr->bth[1] = cpu_to_be32(qp->remote_qpn);
- ohdr->bth[2] = cpu_to_be32(qp->s_ack_psn & IPS_PSN_MASK);
+ ohdr->bth[2] = cpu_to_be32(qp->r_ack_psn & IPATH_PSN_MASK);
/*
* If we can send the ACK, clear the ACK state.
*/
- if (ipath_verbs_send(dev->dd, qp->s_hdrwords, (u32 *) &qp->s_hdr,
- 0, NULL) == 0) {
- qp->s_ack_state = OP(ACKNOWLEDGE);
- dev->n_rc_qacks++;
+ if (ipath_verbs_send(dev->dd, hwords, (u32 *) &hdr, 0, NULL) == 0) {
+ qp->r_ack_state = OP(ACKNOWLEDGE);
dev->n_unicast_xmit++;
+ } else {
+ /*
+ * We are out of PIO buffers at the moment.
+ * Pass responsibility for sending the ACK to the
+ * send tasklet so that when a PIO buffer becomes
+ * available, the ACK is sent ahead of other outgoing
+ * packets.
+ */
+ dev->n_rc_qacks++;
+ spin_lock_irq(&qp->s_lock);
+ /* Don't coalesce if a RDMA read or atomic is pending. */
+ if (qp->s_ack_state == OP(ACKNOWLEDGE) ||
+ qp->s_ack_state < OP(RDMA_READ_REQUEST)) {
+ qp->s_ack_state = qp->r_ack_state;
+ qp->s_nak_state = qp->r_nak_state;
+ qp->s_ack_psn = qp->r_ack_psn;
+ qp->r_ack_state = OP(ACKNOWLEDGE);
+ }
+ spin_unlock_irq(&qp->s_lock);
+
+ /* Call ipath_do_rc_send() in another thread. */
+ tasklet_hi_schedule(&qp->s_task);
}
}
/**
+ * reset_psn - reset the QP state to send starting from PSN
+ * @qp: the QP
+ * @psn: the packet sequence number to restart at
+ *
+ * This is called from ipath_rc_rcv() to process an incoming RC ACK
+ * for the given QP.
+ * Called at interrupt level with the QP s_lock held.
+ */
+static void reset_psn(struct ipath_qp *qp, u32 psn)
+{
+ u32 n = qp->s_last;
+ struct ipath_swqe *wqe = get_swqe_ptr(qp, n);
+ u32 opcode;
+
+ qp->s_cur = n;
+
+ /*
+ * If we are starting the request from the beginning,
+ * let the normal send code handle initialization.
+ */
+ if (ipath_cmp24(psn, wqe->psn) <= 0) {
+ qp->s_state = OP(SEND_LAST);
+ goto done;
+ }
+
+ /* Find the work request opcode corresponding to the given PSN. */
+ opcode = wqe->wr.opcode;
+ for (;;) {
+ int diff;
+
+ if (++n == qp->s_size)
+ n = 0;
+ if (n == qp->s_tail)
+ break;
+ wqe = get_swqe_ptr(qp, n);
+ diff = ipath_cmp24(psn, wqe->psn);
+ if (diff < 0)
+ break;
+ qp->s_cur = n;
+ /*
+ * If we are starting the request from the beginning,
+ * let the normal send code handle initialization.
+ */
+ if (diff == 0) {
+ qp->s_state = OP(SEND_LAST);
+ goto done;
+ }
+ opcode = wqe->wr.opcode;
+ }
+
+ /*
+ * Set the state to restart in the middle of a request.
+ * Don't change the s_sge, s_cur_sge, or s_cur_size.
+ * See ipath_do_rc_send().
+ */
+ switch (opcode) {
+ case IB_WR_SEND:
+ case IB_WR_SEND_WITH_IMM:
+ qp->s_state = OP(RDMA_READ_RESPONSE_FIRST);
+ break;
+
+ case IB_WR_RDMA_WRITE:
+ case IB_WR_RDMA_WRITE_WITH_IMM:
+ qp->s_state = OP(RDMA_READ_RESPONSE_LAST);
+ break;
+
+ case IB_WR_RDMA_READ:
+ qp->s_state = OP(RDMA_READ_RESPONSE_MIDDLE);
+ break;
+
+ default:
+ /*
+ * This case shouldn't happen since its only
+ * one PSN per req.
+ */
+ qp->s_state = OP(SEND_LAST);
+ }
+done:
+ qp->s_psn = psn;
+}
+
+/**
* ipath_restart_rc - back up requester to resend the last un-ACKed request
* @qp: the QP to restart
* @psn: packet sequence number for the request
* @wc: the work completion request
*
- * The QP s_lock should be held.
+ * The QP s_lock should be held and interrupts disabled.
*/
void ipath_restart_rc(struct ipath_qp *qp, u32 psn, struct ib_wc *wc)
{
struct ipath_swqe *wqe = get_swqe_ptr(qp, qp->s_last);
struct ipath_ibdev *dev;
- u32 n;
/*
* If there are no requests pending, we are done.
@@ -735,62 +728,7 @@
else
dev->n_rc_resends += (int)qp->s_psn - (int)psn;
- /*
- * If we are starting the request from the beginning, let the normal
- * send code handle initialization.
- */
- qp->s_cur = qp->s_last;
- if (ipath_cmp24(psn, wqe->psn) <= 0) {
- qp->s_state = OP(SEND_LAST);
- qp->s_psn = wqe->psn;
- } else {
- n = qp->s_cur;
- for (;;) {
- if (++n == qp->s_size)
- n = 0;
- if (n == qp->s_tail) {
- if (ipath_cmp24(psn, qp->s_next_psn) >= 0) {
- qp->s_cur = n;
- wqe = get_swqe_ptr(qp, n);
- }
- break;
- }
- wqe = get_swqe_ptr(qp, n);
- if (ipath_cmp24(psn, wqe->psn) < 0)
- break;
- qp->s_cur = n;
- }
- qp->s_psn = psn;
-
- /*
- * Reset the state to restart in the middle of a request.
- * Don't change the s_sge, s_cur_sge, or s_cur_size.
- * See ipath_do_rc_send().
- */
- switch (wqe->wr.opcode) {
- case IB_WR_SEND:
- case IB_WR_SEND_WITH_IMM:
- qp->s_state = OP(RDMA_READ_RESPONSE_FIRST);
- break;
-
- case IB_WR_RDMA_WRITE:
- case IB_WR_RDMA_WRITE_WITH_IMM:
- qp->s_state = OP(RDMA_READ_RESPONSE_LAST);
- break;
-
- case IB_WR_RDMA_READ:
- qp->s_state =
- OP(RDMA_READ_RESPONSE_MIDDLE);
- break;
-
- default:
- /*
- * This case shouldn't happen since its only
- * one PSN per req.
- */
- qp->s_state = OP(SEND_LAST);
- }
- }
+ reset_psn(qp, psn);
done:
tasklet_hi_schedule(&qp->s_task);
@@ -800,76 +738,14 @@
}
/**
- * reset_psn - reset the QP state to send starting from PSN
- * @qp: the QP
- * @psn: the packet sequence number to restart at
- *
- * This is called from ipath_rc_rcv() to process an incoming RC ACK
- * for the given QP.
- * Called at interrupt level with the QP s_lock held.
- */
-static void reset_psn(struct ipath_qp *qp, u32 psn)
-{
- struct ipath_swqe *wqe;
- u32 n;
-
- n = qp->s_cur;
- wqe = get_swqe_ptr(qp, n);
- for (;;) {
- if (++n == qp->s_size)
- n = 0;
- if (n == qp->s_tail) {
- if (ipath_cmp24(psn, qp->s_next_psn) >= 0) {
- qp->s_cur = n;
- wqe = get_swqe_ptr(qp, n);
- }
- break;
- }
- wqe = get_swqe_ptr(qp, n);
- if (ipath_cmp24(psn, wqe->psn) < 0)
- break;
- qp->s_cur = n;
- }
- qp->s_psn = psn;
-
- /*
- * Set the state to restart in the middle of a
- * request. Don't change the s_sge, s_cur_sge, or
- * s_cur_size. See ipath_do_rc_send().
- */
- switch (wqe->wr.opcode) {
- case IB_WR_SEND:
- case IB_WR_SEND_WITH_IMM:
- qp->s_state = OP(RDMA_READ_RESPONSE_FIRST);
- break;
-
- case IB_WR_RDMA_WRITE:
- case IB_WR_RDMA_WRITE_WITH_IMM:
- qp->s_state = OP(RDMA_READ_RESPONSE_LAST);
- break;
-
- case IB_WR_RDMA_READ:
- qp->s_state = OP(RDMA_READ_RESPONSE_MIDDLE);
- break;
-
- default:
- /*
- * This case shouldn't happen since its only
- * one PSN per req.
- */
- qp->s_state = OP(SEND_LAST);
- }
-}
-
-/**
* do_rc_ack - process an incoming RC ACK
* @qp: the QP the ACK came in on
* @psn: the packet sequence number of the ACK
* @opcode: the opcode of the request that resulted in the ACK
*
- * This is called from ipath_rc_rcv() to process an incoming RC ACK
+ * This is called from ipath_rc_rcv_resp() to process an incoming RC ACK
* for the given QP.
- * Called at interrupt level with the QP s_lock held.
+ * Called at interrupt level with the QP s_lock held and interrupts disabled.
* Returns 1 if OK, 0 if current operation should be aborted (NAK).
*/
static int do_rc_ack(struct ipath_qp *qp, u32 aeth, u32 psn, int opcode)
@@ -1006,26 +882,16 @@
if (qp->s_last == qp->s_tail)
goto bail;
- /* The last valid PSN seen is the previous request's. */
- qp->s_last_psn = wqe->psn - 1;
+ /* The last valid PSN is the previous PSN. */
+ qp->s_last_psn = psn - 1;
dev->n_rc_resends += (int)qp->s_psn - (int)psn;
- /*
- * If we are starting the request from the beginning, let
- * the normal send code handle initialization.
- */
- qp->s_cur = qp->s_last;
- wqe = get_swqe_ptr(qp, qp->s_cur);
- if (ipath_cmp24(psn, wqe->psn) <= 0) {
- qp->s_state = OP(SEND_LAST);
- qp->s_psn = wqe->psn;
- } else
- reset_psn(qp, psn);
+ reset_psn(qp, psn);
qp->s_rnr_timeout =
- ib_ipath_rnr_table[(aeth >> IPS_AETH_CREDIT_SHIFT) &
- IPS_AETH_CREDIT_MASK];
+ ib_ipath_rnr_table[(aeth >> IPATH_AETH_CREDIT_SHIFT) &
+ IPATH_AETH_CREDIT_MASK];
ipath_insert_rnr_queue(qp);
goto bail;
@@ -1033,8 +899,8 @@
/* The last valid PSN seen is the previous request's. */
if (qp->s_last != qp->s_tail)
qp->s_last_psn = wqe->psn - 1;
- switch ((aeth >> IPS_AETH_CREDIT_SHIFT) &
- IPS_AETH_CREDIT_MASK) {
+ switch ((aeth >> IPATH_AETH_CREDIT_SHIFT) &
+ IPATH_AETH_CREDIT_MASK) {
case 0: /* PSN sequence error */
dev->n_seq_naks++;
/*
@@ -1182,32 +1048,33 @@
goto ack_done;
}
rdma_read:
- if (unlikely(qp->s_state != OP(RDMA_READ_REQUEST)))
- goto ack_done;
- if (unlikely(tlen != (hdrsize + pmtu + 4)))
- goto ack_done;
- if (unlikely(pmtu >= qp->s_len))
- goto ack_done;
- /* We got a response so update the timeout. */
- if (unlikely(qp->s_last == qp->s_tail ||
- get_swqe_ptr(qp, qp->s_last)->wr.opcode !=
- IB_WR_RDMA_READ))
- goto ack_done;
- spin_lock(&dev->pending_lock);
- if (qp->s_rnr_timeout == 0 && !list_empty(&qp->timerwait))
- list_move_tail(&qp->timerwait,
- &dev->pending[dev->pending_index]);
- spin_unlock(&dev->pending_lock);
- /*
- * Update the RDMA receive state but do the copy w/o holding the
- * locks and blocking interrupts. XXX Yet another place that
- * affects relaxed RDMA order since we don't want s_sge modified.
- */
- qp->s_len -= pmtu;
- qp->s_last_psn = psn;
- spin_unlock_irqrestore(&qp->s_lock, flags);
- ipath_copy_sge(&qp->s_sge, data, pmtu);
- goto bail;
+ if (unlikely(qp->s_state != OP(RDMA_READ_REQUEST)))
+ goto ack_done;
+ if (unlikely(tlen != (hdrsize + pmtu + 4)))
+ goto ack_done;
+ if (unlikely(pmtu >= qp->s_len))
+ goto ack_done;
+ /* We got a response so update the timeout. */
+ if (unlikely(qp->s_last == qp->s_tail ||
+ get_swqe_ptr(qp, qp->s_last)->wr.opcode !=
+ IB_WR_RDMA_READ))
+ goto ack_done;
+ spin_lock(&dev->pending_lock);
+ if (qp->s_rnr_timeout == 0 && !list_empty(&qp->timerwait))
+ list_move_tail(&qp->timerwait,
+ &dev->pending[dev->pending_index]);
+ spin_unlock(&dev->pending_lock);
+ /*
+ * Update the RDMA receive state but do the copy w/o
+ * holding the locks and blocking interrupts.
+ * XXX Yet another place that affects relaxed RDMA order
+ * since we don't want s_sge modified.
+ */
+ qp->s_len -= pmtu;
+ qp->s_last_psn = psn;
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ ipath_copy_sge(&qp->s_sge, data, pmtu);
+ goto bail;
case OP(RDMA_READ_RESPONSE_LAST):
/* ACKs READ req. */
@@ -1230,18 +1097,12 @@
* ICRC (4).
*/
if (unlikely(tlen <= (hdrsize + pad + 8))) {
- /*
- * XXX Need to generate an error CQ
- * entry.
- */
+ /* XXX Need to generate an error CQ entry. */
goto ack_done;
}
tlen -= hdrsize + pad + 8;
if (unlikely(tlen != qp->s_len)) {
- /*
- * XXX Need to generate an error CQ
- * entry.
- */
+ /* XXX Need to generate an error CQ entry. */
goto ack_done;
}
if (!header_in_data)
@@ -1254,9 +1115,12 @@
if (do_rc_ack(qp, aeth, psn, OP(RDMA_READ_RESPONSE_LAST))) {
/*
* Change the state so we contimue
- * processing new requests.
+ * processing new requests and wake up the
+ * tasklet if there are posted sends.
*/
qp->s_state = OP(SEND_LAST);
+ if (qp->s_tail != qp->s_head)
+ tasklet_hi_schedule(&qp->s_task);
}
goto ack_done;
}
@@ -1302,18 +1166,16 @@
* Don't queue the NAK if a RDMA read, atomic, or
* NAK is pending though.
*/
- spin_lock(&qp->s_lock);
- if ((qp->s_ack_state >= OP(RDMA_READ_REQUEST) &&
- qp->s_ack_state != IB_OPCODE_ACKNOWLEDGE) ||
- qp->s_nak_state != 0) {
- spin_unlock(&qp->s_lock);
+ if (qp->s_ack_state != OP(ACKNOWLEDGE) ||
+ qp->r_nak_state != 0)
goto done;
+ if (qp->r_ack_state < OP(COMPARE_SWAP)) {
+ qp->r_ack_state = OP(SEND_ONLY);
+ qp->r_nak_state = IB_NAK_PSN_ERROR;
+ /* Use the expected PSN. */
+ qp->r_ack_psn = qp->r_psn;
}
- qp->s_ack_state = OP(SEND_ONLY);
- qp->s_nak_state = IB_NAK_PSN_ERROR;
- /* Use the expected PSN. */
- qp->s_ack_psn = qp->r_psn;
- goto resched;
+ goto send_ack;
}
/*
@@ -1327,27 +1189,7 @@
* send the earliest so that RDMA reads can be restarted at
* the requester's expected PSN.
*/
- spin_lock(&qp->s_lock);
- if (qp->s_ack_state != IB_OPCODE_ACKNOWLEDGE &&
- ipath_cmp24(psn, qp->s_ack_psn) >= 0) {
- if (qp->s_ack_state < IB_OPCODE_RDMA_READ_REQUEST)
- qp->s_ack_psn = psn;
- spin_unlock(&qp->s_lock);
- goto done;
- }
- switch (opcode) {
- case OP(RDMA_READ_REQUEST):
- /*
- * We have to be careful to not change s_rdma_sge
- * while ipath_do_rc_send() is using it and not
- * holding the s_lock.
- */
- if (qp->s_ack_state != OP(ACKNOWLEDGE) &&
- qp->s_ack_state >= IB_OPCODE_RDMA_READ_REQUEST) {
- spin_unlock(&qp->s_lock);
- dev->n_rdma_dup_busy++;
- goto done;
- }
+ if (opcode == OP(RDMA_READ_REQUEST)) {
/* RETH comes after BTH */
if (!header_in_data)
reth = &ohdr->u.rc.reth;
@@ -1355,6 +1197,22 @@
reth = (struct ib_reth *)data;
data += sizeof(*reth);
}
+ /*
+ * If we receive a duplicate RDMA request, it means the
+ * requester saw a sequence error and needs to restart
+ * from an earlier point. We can abort the current
+ * RDMA read send in that case.
+ */
+ spin_lock_irq(&qp->s_lock);
+ if (qp->s_ack_state != OP(ACKNOWLEDGE) &&
+ (qp->s_hdrwords || ipath_cmp24(psn, qp->s_ack_psn) >= 0)) {
+ /*
+ * We are already sending earlier requested data.
+ * Don't abort it to send later out of sequence data.
+ */
+ spin_unlock_irq(&qp->s_lock);
+ goto done;
+ }
qp->s_rdma_len = be32_to_cpu(reth->length);
if (qp->s_rdma_len != 0) {
u32 rkey = be32_to_cpu(reth->rkey);
@@ -1368,8 +1226,10 @@
ok = ipath_rkey_ok(dev, &qp->s_rdma_sge,
qp->s_rdma_len, vaddr, rkey,
IB_ACCESS_REMOTE_READ);
- if (unlikely(!ok))
+ if (unlikely(!ok)) {
+ spin_unlock_irq(&qp->s_lock);
goto done;
+ }
} else {
qp->s_rdma_sge.sg_list = NULL;
qp->s_rdma_sge.num_sge = 0;
@@ -1378,25 +1238,44 @@
qp->s_rdma_sge.sge.length = 0;
qp->s_rdma_sge.sge.sge_length = 0;
}
- break;
+ qp->s_ack_state = opcode;
+ qp->s_ack_psn = psn;
+ spin_unlock_irq(&qp->s_lock);
+ tasklet_hi_schedule(&qp->s_task);
+ goto send_ack;
+ }
+ /*
+ * A pending RDMA read will ACK anything before it so
+ * ignore earlier duplicate requests.
+ */
+ if (qp->s_ack_state != OP(ACKNOWLEDGE))
+ goto done;
+
+ /*
+ * If an ACK is pending, don't replace the pending ACK
+ * with an earlier one since the later one will ACK the earlier.
+ * Also, if we already have a pending atomic, send it.
+ */
+ if (qp->r_ack_state != OP(ACKNOWLEDGE) &&
+ (ipath_cmp24(psn, qp->r_ack_psn) <= 0 ||
+ qp->r_ack_state >= OP(COMPARE_SWAP)))
+ goto send_ack;
+ switch (opcode) {
case OP(COMPARE_SWAP):
case OP(FETCH_ADD):
/*
- * Check for the PSN of the last atomic operations
+ * Check for the PSN of the last atomic operation
* performed and resend the result if found.
*/
- if ((psn & IPS_PSN_MASK) != qp->r_atomic_psn) {
- spin_unlock(&qp->s_lock);
+ if ((psn & IPATH_PSN_MASK) != qp->r_atomic_psn)
goto done;
- }
- qp->s_ack_atomic = qp->r_atomic_data;
break;
}
- qp->s_ack_state = opcode;
- qp->s_nak_state = 0;
- qp->s_ack_psn = psn;
-resched:
+ qp->r_ack_state = opcode;
+ qp->r_nak_state = 0;
+ qp->r_ack_psn = psn;
+send_ack:
return 0;
done:
@@ -1424,7 +1303,6 @@
u32 hdrsize;
u32 psn;
u32 pad;
- unsigned long flags;
struct ib_wc wc;
u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
int diff;
@@ -1453,11 +1331,6 @@
} else
psn = be32_to_cpu(ohdr->bth[2]);
}
- /*
- * The opcode is in the low byte when its in network order
- * (top byte when in host order).
- */
- opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
/*
* Process responses (ACKs) before anything else. Note that the
@@ -1465,22 +1338,21 @@
* queue rather than the expected receive packet sequence number.
* In other words, this QP is the requester.
*/
+ opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
if (opcode >= OP(RDMA_READ_RESPONSE_FIRST) &&
opcode <= OP(ATOMIC_ACKNOWLEDGE)) {
ipath_rc_rcv_resp(dev, ohdr, data, tlen, qp, opcode, psn,
hdrsize, pmtu, header_in_data);
- goto bail;
+ goto done;
}
- spin_lock_irqsave(&qp->r_rq.lock, flags);
-
/* Compute 24 bits worth of difference. */
diff = ipath_cmp24(psn, qp->r_psn);
if (unlikely(diff)) {
if (ipath_rc_rcv_error(dev, ohdr, data, qp, opcode,
psn, diff, header_in_data))
goto done;
- goto resched;
+ goto send_ack;
}
/* Check for opcode sequence errors. */
@@ -1492,22 +1364,19 @@
opcode == OP(SEND_LAST_WITH_IMMEDIATE))
break;
nack_inv:
- /*
- * A NAK will ACK earlier sends and RDMA writes. Don't queue the
- * NAK if a RDMA read, atomic, or NAK is pending though.
- */
- spin_lock(&qp->s_lock);
- if (qp->s_ack_state >= OP(RDMA_READ_REQUEST) &&
- qp->s_ack_state != IB_OPCODE_ACKNOWLEDGE) {
- spin_unlock(&qp->s_lock);
- goto done;
- }
- /* XXX Flush WQEs */
- qp->state = IB_QPS_ERR;
- qp->s_ack_state = OP(SEND_ONLY);
- qp->s_nak_state = IB_NAK_INVALID_REQUEST;
- qp->s_ack_psn = qp->r_psn;
- goto resched;
+ /*
+ * A NAK will ACK earlier sends and RDMA writes.
+ * Don't queue the NAK if a RDMA read, atomic, or NAK
+ * is pending though.
+ */
+ if (qp->r_ack_state >= OP(COMPARE_SWAP))
+ goto send_ack;
+ /* XXX Flush WQEs */
+ qp->state = IB_QPS_ERR;
+ qp->r_ack_state = OP(SEND_ONLY);
+ qp->r_nak_state = IB_NAK_INVALID_REQUEST;
+ qp->r_ack_psn = qp->r_psn;
+ goto send_ack;
case OP(RDMA_WRITE_FIRST):
case OP(RDMA_WRITE_MIDDLE):
@@ -1517,20 +1386,6 @@
break;
goto nack_inv;
- case OP(RDMA_READ_REQUEST):
- case OP(COMPARE_SWAP):
- case OP(FETCH_ADD):
- /*
- * Drop all new requests until a response has been sent. A
- * new request then ACKs the RDMA response we sent. Relaxed
- * ordering would allow new requests to be processed but we
- * would need to keep a queue of rwqe's for all that are in
- * progress. Note that we can't RNR NAK this request since
- * the RDMA READ or atomic response is already queued to be
- * sent (unless we implement a response send queue).
- */
- goto done;
-
default:
if (opcode == OP(SEND_MIDDLE) ||
opcode == OP(SEND_LAST) ||
@@ -1539,6 +1394,11 @@
opcode == OP(RDMA_WRITE_LAST) ||
opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE))
goto nack_inv;
+ /*
+ * Note that it is up to the requester to not send a new
+ * RDMA read or atomic operation before receiving an ACK
+ * for the previous operation.
+ */
break;
}
@@ -1555,17 +1415,12 @@
* Don't queue the NAK if a RDMA read or atomic
* is pending though.
*/
- spin_lock(&qp->s_lock);
- if (qp->s_ack_state >=
- OP(RDMA_READ_REQUEST) &&
- qp->s_ack_state != IB_OPCODE_ACKNOWLEDGE) {
- spin_unlock(&qp->s_lock);
- goto done;
- }
- qp->s_ack_state = OP(SEND_ONLY);
- qp->s_nak_state = IB_RNR_NAK | qp->s_min_rnr_timer;
- qp->s_ack_psn = qp->r_psn;
- goto resched;
+ if (qp->r_ack_state >= OP(COMPARE_SWAP))
+ goto send_ack;
+ qp->r_ack_state = OP(SEND_ONLY);
+ qp->r_nak_state = IB_RNR_NAK | qp->r_min_rnr_timer;
+ qp->r_ack_psn = qp->r_psn;
+ goto send_ack;
}
qp->r_rcv_len = 0;
/* FALLTHROUGH */
@@ -1622,7 +1477,7 @@
if (unlikely(wc.byte_len > qp->r_len))
goto nack_inv;
ipath_copy_sge(&qp->r_sge, data, tlen);
- atomic_inc(&qp->msn);
+ qp->r_msn++;
if (opcode == OP(RDMA_WRITE_LAST) ||
opcode == OP(RDMA_WRITE_ONLY))
break;
@@ -1666,29 +1521,8 @@
ok = ipath_rkey_ok(dev, &qp->r_sge,
qp->r_len, vaddr, rkey,
IB_ACCESS_REMOTE_WRITE);
- if (unlikely(!ok)) {
- nack_acc:
- /*
- * A NAK will ACK earlier sends and RDMA
- * writes. Don't queue the NAK if a RDMA
- * read, atomic, or NAK is pending though.
- */
- spin_lock(&qp->s_lock);
- if (qp->s_ack_state >=
- OP(RDMA_READ_REQUEST) &&
- qp->s_ack_state !=
- IB_OPCODE_ACKNOWLEDGE) {
- spin_unlock(&qp->s_lock);
- goto done;
- }
- /* XXX Flush WQEs */
- qp->state = IB_QPS_ERR;
- qp->s_ack_state = OP(RDMA_WRITE_ONLY);
- qp->s_nak_state =
- IB_NAK_REMOTE_ACCESS_ERROR;
- qp->s_ack_psn = qp->r_psn;
- goto resched;
- }
+ if (unlikely(!ok))
+ goto nack_acc;
} else {
qp->r_sge.sg_list = NULL;
qp->r_sge.sge.mr = NULL;
@@ -1715,12 +1549,10 @@
reth = (struct ib_reth *)data;
data += sizeof(*reth);
}
- spin_lock(&qp->s_lock);
- if (qp->s_ack_state != OP(ACKNOWLEDGE) &&
- qp->s_ack_state >= IB_OPCODE_RDMA_READ_REQUEST) {
- spin_unlock(&qp->s_lock);
- goto done;
- }
+ if (unlikely(!(qp->qp_access_flags &
+ IB_ACCESS_REMOTE_READ)))
+ goto nack_acc;
+ spin_lock_irq(&qp->s_lock);
qp->s_rdma_len = be32_to_cpu(reth->length);
if (qp->s_rdma_len != 0) {
u32 rkey = be32_to_cpu(reth->rkey);
@@ -1732,7 +1564,7 @@
qp->s_rdma_len, vaddr, rkey,
IB_ACCESS_REMOTE_READ);
if (unlikely(!ok)) {
- spin_unlock(&qp->s_lock);
+ spin_unlock_irq(&qp->s_lock);
goto nack_acc;
}
/*
@@ -1749,21 +1581,25 @@
qp->s_rdma_sge.sge.length = 0;
qp->s_rdma_sge.sge.sge_length = 0;
}
- if (unlikely(!(qp->qp_access_flags &
- IB_ACCESS_REMOTE_READ)))
- goto nack_acc;
/*
* We need to increment the MSN here instead of when we
* finish sending the result since a duplicate request would
* increment it more than once.
*/
- atomic_inc(&qp->msn);
+ qp->r_msn++;
+
qp->s_ack_state = opcode;
- qp->s_nak_state = 0;
qp->s_ack_psn = psn;
+ spin_unlock_irq(&qp->s_lock);
+
qp->r_psn++;
qp->r_state = opcode;
- goto rdmadone;
+ qp->r_nak_state = 0;
+
+ /* Call ipath_do_rc_send() in another thread. */
+ tasklet_hi_schedule(&qp->s_task);
+
+ goto done;
case OP(COMPARE_SWAP):
case OP(FETCH_ADD): {
@@ -1792,7 +1628,7 @@
goto nack_acc;
/* Perform atomic OP and save result. */
sdata = be64_to_cpu(ateth->swap_data);
- spin_lock(&dev->pending_lock);
+ spin_lock_irq(&dev->pending_lock);
qp->r_atomic_data = *(u64 *) qp->r_sge.sge.vaddr;
if (opcode == OP(FETCH_ADD))
*(u64 *) qp->r_sge.sge.vaddr =
@@ -1800,9 +1636,9 @@
else if (qp->r_atomic_data ==
be64_to_cpu(ateth->compare_data))
*(u64 *) qp->r_sge.sge.vaddr = sdata;
- spin_unlock(&dev->pending_lock);
- atomic_inc(&qp->msn);
- qp->r_atomic_psn = psn & IPS_PSN_MASK;
+ spin_unlock_irq(&dev->pending_lock);
+ qp->r_msn++;
+ qp->r_atomic_psn = psn & IPATH_PSN_MASK;
psn |= 1 << 31;
break;
}
@@ -1813,44 +1649,39 @@
}
qp->r_psn++;
qp->r_state = opcode;
+ qp->r_nak_state = 0;
/* Send an ACK if requested or required. */
if (psn & (1 << 31)) {
/*
* Coalesce ACKs unless there is a RDMA READ or
* ATOMIC pending.
*/
- spin_lock(&qp->s_lock);
- if (qp->s_ack_state == OP(ACKNOWLEDGE) ||
- qp->s_ack_state < IB_OPCODE_RDMA_READ_REQUEST) {
- qp->s_ack_state = opcode;
- qp->s_nak_state = 0;
- qp->s_ack_psn = psn;
- qp->s_ack_atomic = qp->r_atomic_data;
- goto resched;
+ if (qp->r_ack_state < OP(COMPARE_SWAP)) {
+ qp->r_ack_state = opcode;
+ qp->r_ack_psn = psn;
}
- spin_unlock(&qp->s_lock);
+ goto send_ack;
}
-done:
- spin_unlock_irqrestore(&qp->r_rq.lock, flags);
- goto bail;
+ goto done;
-resched:
+nack_acc:
/*
- * Try to send ACK right away but not if ipath_do_rc_send() is
- * active.
+ * A NAK will ACK earlier sends and RDMA writes.
+ * Don't queue the NAK if a RDMA read, atomic, or NAK
+ * is pending though.
*/
- if (qp->s_hdrwords == 0 &&
- (qp->s_ack_state < IB_OPCODE_RDMA_READ_REQUEST ||
- qp->s_ack_state >= IB_OPCODE_COMPARE_SWAP))
+ if (qp->r_ack_state < OP(COMPARE_SWAP)) {
+ /* XXX Flush WQEs */
+ qp->state = IB_QPS_ERR;
+ qp->r_ack_state = OP(RDMA_WRITE_ONLY);
+ qp->r_nak_state = IB_NAK_REMOTE_ACCESS_ERROR;
+ qp->r_ack_psn = qp->r_psn;
+ }
+send_ack:
+ /* Send ACK right away unless the send tasklet has a pending ACK. */
+ if (qp->s_ack_state == OP(ACKNOWLEDGE))
send_rc_ack(qp);
-rdmadone:
- spin_unlock(&qp->s_lock);
- spin_unlock_irqrestore(&qp->r_rq.lock, flags);
-
- /* Call ipath_do_rc_send() in another thread. */
- tasklet_hi_schedule(&qp->s_task);
-
-bail:
+done:
return;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_registers.h b/drivers/infiniband/hw/ipath/ipath_registers.h
index 402126e..89df8f5 100644
--- a/drivers/infiniband/hw/ipath/ipath_registers.h
+++ b/drivers/infiniband/hw/ipath/ipath_registers.h
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c
index d38f4f3..772bc59f 100644
--- a/drivers/infiniband/hw/ipath/ipath_ruc.c
+++ b/drivers/infiniband/hw/ipath/ipath_ruc.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -31,6 +32,7 @@
*/
#include "ipath_verbs.h"
+#include "ipath_common.h"
/*
* Convert the AETH RNR timeout code into the number of milliseconds.
@@ -111,20 +113,23 @@
*
* Return 0 if no RWQE is available, otherwise return 1.
*
- * Called at interrupt level with the QP r_rq.lock held.
+ * Can be called from interrupt level.
*/
int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only)
{
+ unsigned long flags;
struct ipath_rq *rq;
struct ipath_srq *srq;
struct ipath_rwqe *wqe;
- int ret;
+ int ret = 1;
if (!qp->ibqp.srq) {
rq = &qp->r_rq;
+ spin_lock_irqsave(&rq->lock, flags);
+
if (unlikely(rq->tail == rq->head)) {
ret = 0;
- goto bail;
+ goto done;
}
wqe = get_rwqe_ptr(rq, rq->tail);
qp->r_wr_id = wqe->wr_id;
@@ -136,17 +141,16 @@
}
if (++rq->tail >= rq->size)
rq->tail = 0;
- ret = 1;
- goto bail;
+ goto done;
}
srq = to_isrq(qp->ibqp.srq);
rq = &srq->rq;
- spin_lock(&rq->lock);
+ spin_lock_irqsave(&rq->lock, flags);
+
if (unlikely(rq->tail == rq->head)) {
- spin_unlock(&rq->lock);
ret = 0;
- goto bail;
+ goto done;
}
wqe = get_rwqe_ptr(rq, rq->tail);
qp->r_wr_id = wqe->wr_id;
@@ -168,18 +172,18 @@
n = rq->head - rq->tail;
if (n < srq->limit) {
srq->limit = 0;
- spin_unlock(&rq->lock);
+ spin_unlock_irqrestore(&rq->lock, flags);
ev.device = qp->ibqp.device;
ev.element.srq = qp->ibqp.srq;
ev.event = IB_EVENT_SRQ_LIMIT_REACHED;
srq->ibsrq.event_handler(&ev,
srq->ibsrq.srq_context);
- } else
- spin_unlock(&rq->lock);
- } else
- spin_unlock(&rq->lock);
- ret = 1;
+ goto bail;
+ }
+ }
+done:
+ spin_unlock_irqrestore(&rq->lock, flags);
bail:
return ret;
}
@@ -187,7 +191,6 @@
/**
* ipath_ruc_loopback - handle UC and RC lookback requests
* @sqp: the loopback QP
- * @wc: the work completion entry
*
* This is called from ipath_do_uc_send() or ipath_do_rc_send() to
* forward a WQE addressed to the same HCA.
@@ -196,13 +199,14 @@
* receive interrupts since this is a connected protocol and all packets
* will pass through here.
*/
-void ipath_ruc_loopback(struct ipath_qp *sqp, struct ib_wc *wc)
+static void ipath_ruc_loopback(struct ipath_qp *sqp)
{
struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
struct ipath_qp *qp;
struct ipath_swqe *wqe;
struct ipath_sge *sge;
unsigned long flags;
+ struct ib_wc wc;
u64 sdata;
qp = ipath_lookup_qpn(&dev->qp_table, sqp->remote_qpn);
@@ -233,8 +237,8 @@
wqe = get_swqe_ptr(sqp, sqp->s_last);
spin_unlock_irqrestore(&sqp->s_lock, flags);
- wc->wc_flags = 0;
- wc->imm_data = 0;
+ wc.wc_flags = 0;
+ wc.imm_data = 0;
sqp->s_sge.sge = wqe->sg_list[0];
sqp->s_sge.sg_list = wqe->sg_list + 1;
@@ -242,39 +246,34 @@
sqp->s_len = wqe->length;
switch (wqe->wr.opcode) {
case IB_WR_SEND_WITH_IMM:
- wc->wc_flags = IB_WC_WITH_IMM;
- wc->imm_data = wqe->wr.imm_data;
+ wc.wc_flags = IB_WC_WITH_IMM;
+ wc.imm_data = wqe->wr.imm_data;
/* FALLTHROUGH */
case IB_WR_SEND:
- spin_lock_irqsave(&qp->r_rq.lock, flags);
if (!ipath_get_rwqe(qp, 0)) {
rnr_nak:
- spin_unlock_irqrestore(&qp->r_rq.lock, flags);
/* Handle RNR NAK */
if (qp->ibqp.qp_type == IB_QPT_UC)
goto send_comp;
if (sqp->s_rnr_retry == 0) {
- wc->status = IB_WC_RNR_RETRY_EXC_ERR;
+ wc.status = IB_WC_RNR_RETRY_EXC_ERR;
goto err;
}
if (sqp->s_rnr_retry_cnt < 7)
sqp->s_rnr_retry--;
dev->n_rnr_naks++;
sqp->s_rnr_timeout =
- ib_ipath_rnr_table[sqp->s_min_rnr_timer];
+ ib_ipath_rnr_table[sqp->r_min_rnr_timer];
ipath_insert_rnr_queue(sqp);
goto done;
}
- spin_unlock_irqrestore(&qp->r_rq.lock, flags);
break;
case IB_WR_RDMA_WRITE_WITH_IMM:
- wc->wc_flags = IB_WC_WITH_IMM;
- wc->imm_data = wqe->wr.imm_data;
- spin_lock_irqsave(&qp->r_rq.lock, flags);
+ wc.wc_flags = IB_WC_WITH_IMM;
+ wc.imm_data = wqe->wr.imm_data;
if (!ipath_get_rwqe(qp, 1))
goto rnr_nak;
- spin_unlock_irqrestore(&qp->r_rq.lock, flags);
/* FALLTHROUGH */
case IB_WR_RDMA_WRITE:
if (wqe->length == 0)
@@ -284,20 +283,20 @@
wqe->wr.wr.rdma.rkey,
IB_ACCESS_REMOTE_WRITE))) {
acc_err:
- wc->status = IB_WC_REM_ACCESS_ERR;
+ wc.status = IB_WC_REM_ACCESS_ERR;
err:
- wc->wr_id = wqe->wr.wr_id;
- wc->opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
- wc->vendor_err = 0;
- wc->byte_len = 0;
- wc->qp_num = sqp->ibqp.qp_num;
- wc->src_qp = sqp->remote_qpn;
- wc->pkey_index = 0;
- wc->slid = sqp->remote_ah_attr.dlid;
- wc->sl = sqp->remote_ah_attr.sl;
- wc->dlid_path_bits = 0;
- wc->port_num = 0;
- ipath_sqerror_qp(sqp, wc);
+ wc.wr_id = wqe->wr.wr_id;
+ wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
+ wc.vendor_err = 0;
+ wc.byte_len = 0;
+ wc.qp_num = sqp->ibqp.qp_num;
+ wc.src_qp = sqp->remote_qpn;
+ wc.pkey_index = 0;
+ wc.slid = sqp->remote_ah_attr.dlid;
+ wc.sl = sqp->remote_ah_attr.sl;
+ wc.dlid_path_bits = 0;
+ wc.port_num = 0;
+ ipath_sqerror_qp(sqp, &wc);
goto done;
}
break;
@@ -373,22 +372,22 @@
goto send_comp;
if (wqe->wr.opcode == IB_WR_RDMA_WRITE_WITH_IMM)
- wc->opcode = IB_WC_RECV_RDMA_WITH_IMM;
+ wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
else
- wc->opcode = IB_WC_RECV;
- wc->wr_id = qp->r_wr_id;
- wc->status = IB_WC_SUCCESS;
- wc->vendor_err = 0;
- wc->byte_len = wqe->length;
- wc->qp_num = qp->ibqp.qp_num;
- wc->src_qp = qp->remote_qpn;
+ wc.opcode = IB_WC_RECV;
+ wc.wr_id = qp->r_wr_id;
+ wc.status = IB_WC_SUCCESS;
+ wc.vendor_err = 0;
+ wc.byte_len = wqe->length;
+ wc.qp_num = qp->ibqp.qp_num;
+ wc.src_qp = qp->remote_qpn;
/* XXX do we know which pkey matched? Only needed for GSI. */
- wc->pkey_index = 0;
- wc->slid = qp->remote_ah_attr.dlid;
- wc->sl = qp->remote_ah_attr.sl;
- wc->dlid_path_bits = 0;
+ wc.pkey_index = 0;
+ wc.slid = qp->remote_ah_attr.dlid;
+ wc.sl = qp->remote_ah_attr.sl;
+ wc.dlid_path_bits = 0;
/* Signal completion event if the solicited bit is set. */
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), wc,
+ ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
wqe->wr.send_flags & IB_SEND_SOLICITED);
send_comp:
@@ -396,19 +395,19 @@
if (!test_bit(IPATH_S_SIGNAL_REQ_WR, &sqp->s_flags) ||
(wqe->wr.send_flags & IB_SEND_SIGNALED)) {
- wc->wr_id = wqe->wr.wr_id;
- wc->status = IB_WC_SUCCESS;
- wc->opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
- wc->vendor_err = 0;
- wc->byte_len = wqe->length;
- wc->qp_num = sqp->ibqp.qp_num;
- wc->src_qp = 0;
- wc->pkey_index = 0;
- wc->slid = 0;
- wc->sl = 0;
- wc->dlid_path_bits = 0;
- wc->port_num = 0;
- ipath_cq_enter(to_icq(sqp->ibqp.send_cq), wc, 0);
+ wc.wr_id = wqe->wr.wr_id;
+ wc.status = IB_WC_SUCCESS;
+ wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
+ wc.vendor_err = 0;
+ wc.byte_len = wqe->length;
+ wc.qp_num = sqp->ibqp.qp_num;
+ wc.src_qp = 0;
+ wc.pkey_index = 0;
+ wc.slid = 0;
+ wc.sl = 0;
+ wc.dlid_path_bits = 0;
+ wc.port_num = 0;
+ ipath_cq_enter(to_icq(sqp->ibqp.send_cq), &wc, 0);
}
/* Update s_last now that we are finished with the SWQE */
@@ -454,11 +453,11 @@
}
/**
- * ipath_post_rc_send - post RC and UC sends
+ * ipath_post_ruc_send - post RC and UC sends
* @qp: the QP to post on
* @wr: the work request to send
*/
-int ipath_post_rc_send(struct ipath_qp *qp, struct ib_send_wr *wr)
+int ipath_post_ruc_send(struct ipath_qp *qp, struct ib_send_wr *wr)
{
struct ipath_swqe *wqe;
unsigned long flags;
@@ -533,13 +532,149 @@
qp->s_head = next;
spin_unlock_irqrestore(&qp->s_lock, flags);
- if (qp->ibqp.qp_type == IB_QPT_UC)
- ipath_do_uc_send((unsigned long) qp);
- else
- ipath_do_rc_send((unsigned long) qp);
+ ipath_do_ruc_send((unsigned long) qp);
ret = 0;
bail:
return ret;
}
+
+/**
+ * ipath_make_grh - construct a GRH header
+ * @dev: a pointer to the ipath device
+ * @hdr: a pointer to the GRH header being constructed
+ * @grh: the global route address to send to
+ * @hwords: the number of 32 bit words of header being sent
+ * @nwords: the number of 32 bit words of data being sent
+ *
+ * Return the size of the header in 32 bit words.
+ */
+u32 ipath_make_grh(struct ipath_ibdev *dev, struct ib_grh *hdr,
+ struct ib_global_route *grh, u32 hwords, u32 nwords)
+{
+ hdr->version_tclass_flow =
+ cpu_to_be32((6 << 28) |
+ (grh->traffic_class << 20) |
+ grh->flow_label);
+ hdr->paylen = cpu_to_be16((hwords - 2 + nwords + SIZE_OF_CRC) << 2);
+ /* next_hdr is defined by C8-7 in ch. 8.4.1 */
+ hdr->next_hdr = 0x1B;
+ hdr->hop_limit = grh->hop_limit;
+ /* The SGID is 32-bit aligned. */
+ hdr->sgid.global.subnet_prefix = dev->gid_prefix;
+ hdr->sgid.global.interface_id = ipath_layer_get_guid(dev->dd);
+ hdr->dgid = grh->dgid;
+
+ /* GRH header size in 32-bit words. */
+ return sizeof(struct ib_grh) / sizeof(u32);
+}
+
+/**
+ * ipath_do_ruc_send - perform a send on an RC or UC QP
+ * @data: contains a pointer to the QP
+ *
+ * Process entries in the send work queue until credit or queue is
+ * exhausted. Only allow one CPU to send a packet per QP (tasklet).
+ * Otherwise, after we drop the QP s_lock, two threads could send
+ * packets out of order.
+ */
+void ipath_do_ruc_send(unsigned long data)
+{
+ struct ipath_qp *qp = (struct ipath_qp *)data;
+ struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+ unsigned long flags;
+ u16 lrh0;
+ u32 nwords;
+ u32 extra_bytes;
+ u32 bth0;
+ u32 bth2;
+ u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
+ struct ipath_other_headers *ohdr;
+
+ if (test_and_set_bit(IPATH_S_BUSY, &qp->s_flags))
+ goto bail;
+
+ if (unlikely(qp->remote_ah_attr.dlid ==
+ ipath_layer_get_lid(dev->dd))) {
+ ipath_ruc_loopback(qp);
+ goto clear;
+ }
+
+ ohdr = &qp->s_hdr.u.oth;
+ if (qp->remote_ah_attr.ah_flags & IB_AH_GRH)
+ ohdr = &qp->s_hdr.u.l.oth;
+
+again:
+ /* Check for a constructed packet to be sent. */
+ if (qp->s_hdrwords != 0) {
+ /*
+ * If no PIO bufs are available, return. An interrupt will
+ * call ipath_ib_piobufavail() when one is available.
+ */
+ if (ipath_verbs_send(dev->dd, qp->s_hdrwords,
+ (u32 *) &qp->s_hdr, qp->s_cur_size,
+ qp->s_cur_sge)) {
+ ipath_no_bufs_available(qp, dev);
+ goto bail;
+ }
+ dev->n_unicast_xmit++;
+ /* Record that we sent the packet and s_hdr is empty. */
+ qp->s_hdrwords = 0;
+ }
+
+ /*
+ * The lock is needed to synchronize between setting
+ * qp->s_ack_state, resend timer, and post_send().
+ */
+ spin_lock_irqsave(&qp->s_lock, flags);
+
+ /* Sending responses has higher priority over sending requests. */
+ if (qp->s_ack_state != IB_OPCODE_RC_ACKNOWLEDGE &&
+ (bth0 = ipath_make_rc_ack(qp, ohdr, pmtu)) != 0)
+ bth2 = qp->s_ack_psn++ & IPATH_PSN_MASK;
+ else if (!((qp->ibqp.qp_type == IB_QPT_RC) ?
+ ipath_make_rc_req(qp, ohdr, pmtu, &bth0, &bth2) :
+ ipath_make_uc_req(qp, ohdr, pmtu, &bth0, &bth2))) {
+ /*
+ * Clear the busy bit before unlocking to avoid races with
+ * adding new work queue items and then failing to process
+ * them.
+ */
+ clear_bit(IPATH_S_BUSY, &qp->s_flags);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ goto bail;
+ }
+
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+
+ /* Construct the header. */
+ extra_bytes = (4 - qp->s_cur_size) & 3;
+ nwords = (qp->s_cur_size + extra_bytes) >> 2;
+ lrh0 = IPATH_LRH_BTH;
+ if (unlikely(qp->remote_ah_attr.ah_flags & IB_AH_GRH)) {
+ qp->s_hdrwords += ipath_make_grh(dev, &qp->s_hdr.u.l.grh,
+ &qp->remote_ah_attr.grh,
+ qp->s_hdrwords, nwords);
+ lrh0 = IPATH_LRH_GRH;
+ }
+ lrh0 |= qp->remote_ah_attr.sl << 4;
+ qp->s_hdr.lrh[0] = cpu_to_be16(lrh0);
+ qp->s_hdr.lrh[1] = cpu_to_be16(qp->remote_ah_attr.dlid);
+ qp->s_hdr.lrh[2] = cpu_to_be16(qp->s_hdrwords + nwords +
+ SIZE_OF_CRC);
+ qp->s_hdr.lrh[3] = cpu_to_be16(ipath_layer_get_lid(dev->dd));
+ bth0 |= ipath_layer_get_pkey(dev->dd, qp->s_pkey_index);
+ bth0 |= extra_bytes << 20;
+ ohdr->bth[0] = cpu_to_be32(bth0);
+ ohdr->bth[1] = cpu_to_be32(qp->remote_qpn);
+ ohdr->bth[2] = cpu_to_be32(bth2);
+
+ /* Check for more work to do. */
+ goto again;
+
+clear:
+ clear_bit(IPATH_S_BUSY, &qp->s_flags);
+bail:
+ return;
+}
diff --git a/drivers/infiniband/hw/ipath/ipath_srq.c b/drivers/infiniband/hw/ipath/ipath_srq.c
index 01c4c6c..f760434 100644
--- a/drivers/infiniband/hw/ipath/ipath_srq.c
+++ b/drivers/infiniband/hw/ipath/ipath_srq.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -125,11 +126,23 @@
struct ib_srq_init_attr *srq_init_attr,
struct ib_udata *udata)
{
+ struct ipath_ibdev *dev = to_idev(ibpd->device);
struct ipath_srq *srq;
u32 sz;
struct ib_srq *ret;
- if (srq_init_attr->attr.max_sge < 1) {
+ if (dev->n_srqs_allocated == ib_ipath_max_srqs) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
+
+ if (srq_init_attr->attr.max_wr == 0) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+
+ if ((srq_init_attr->attr.max_sge > ib_ipath_max_srq_sges) ||
+ (srq_init_attr->attr.max_wr > ib_ipath_max_srq_wrs)) {
ret = ERR_PTR(-EINVAL);
goto bail;
}
@@ -164,6 +177,8 @@
ret = &srq->ibsrq;
+ dev->n_srqs_allocated++;
+
bail:
return ret;
}
@@ -181,24 +196,26 @@
unsigned long flags;
int ret;
- if (attr_mask & IB_SRQ_LIMIT) {
- spin_lock_irqsave(&srq->rq.lock, flags);
- srq->limit = attr->srq_limit;
- spin_unlock_irqrestore(&srq->rq.lock, flags);
- }
- if (attr_mask & IB_SRQ_MAX_WR) {
- u32 size = attr->max_wr + 1;
- struct ipath_rwqe *wq, *p;
- u32 n;
- u32 sz;
-
- if (attr->max_sge < srq->rq.max_sge) {
+ if (attr_mask & IB_SRQ_MAX_WR)
+ if ((attr->max_wr > ib_ipath_max_srq_wrs) ||
+ (attr->max_sge > srq->rq.max_sge)) {
ret = -EINVAL;
goto bail;
}
+ if (attr_mask & IB_SRQ_LIMIT)
+ if (attr->srq_limit >= srq->rq.size) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ if (attr_mask & IB_SRQ_MAX_WR) {
+ struct ipath_rwqe *wq, *p;
+ u32 sz, size, n;
+
sz = sizeof(struct ipath_rwqe) +
attr->max_sge * sizeof(struct ipath_sge);
+ size = attr->max_wr + 1;
wq = vmalloc(size * sz);
if (!wq) {
ret = -ENOMEM;
@@ -242,6 +259,11 @@
spin_unlock_irqrestore(&srq->rq.lock, flags);
}
+ if (attr_mask & IB_SRQ_LIMIT) {
+ spin_lock_irqsave(&srq->rq.lock, flags);
+ srq->limit = attr->srq_limit;
+ spin_unlock_irqrestore(&srq->rq.lock, flags);
+ }
ret = 0;
bail:
@@ -265,7 +287,9 @@
int ipath_destroy_srq(struct ib_srq *ibsrq)
{
struct ipath_srq *srq = to_isrq(ibsrq);
+ struct ipath_ibdev *dev = to_idev(ibsrq->device);
+ dev->n_srqs_allocated--;
vfree(srq->rq.wq);
kfree(srq);
diff --git a/drivers/infiniband/hw/ipath/ipath_stats.c b/drivers/infiniband/hw/ipath/ipath_stats.c
index fe20913..70351b7 100644
--- a/drivers/infiniband/hw/ipath/ipath_stats.c
+++ b/drivers/infiniband/hw/ipath/ipath_stats.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -185,7 +186,6 @@
dd->ipath_port0head,
(unsigned long long)
ipath_stats.sps_port0pkts);
- ipath_kreceive(dd);
}
dd->ipath_lastport0rcv_cnt = ipath_stats.sps_port0pkts;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_sysfs.c b/drivers/infiniband/hw/ipath/ipath_sysfs.c
index f323791..b98821d 100644
--- a/drivers/infiniband/hw/ipath/ipath_sysfs.c
+++ b/drivers/infiniband/hw/ipath/ipath_sysfs.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -34,8 +35,8 @@
#include <linux/pci.h>
#include "ipath_kernel.h"
-#include "ips_common.h"
#include "ipath_layer.h"
+#include "ipath_common.h"
/**
* ipath_parse_ushort - parse an unsigned short value in an arbitrary base
@@ -84,99 +85,6 @@
ipath_count_units(NULL, NULL, NULL));
}
-#define DRIVER_STAT(name, attr) \
- static ssize_t show_stat_##name(struct device_driver *dev, \
- char *buf) \
- { \
- return scnprintf( \
- buf, PAGE_SIZE, "%llu\n", \
- (unsigned long long) ipath_stats.sps_ ##attr); \
- } \
- static DRIVER_ATTR(name, S_IRUGO, show_stat_##name, NULL)
-
-DRIVER_STAT(intrs, ints);
-DRIVER_STAT(err_intrs, errints);
-DRIVER_STAT(errs, errs);
-DRIVER_STAT(pkt_errs, pkterrs);
-DRIVER_STAT(crc_errs, crcerrs);
-DRIVER_STAT(hw_errs, hwerrs);
-DRIVER_STAT(ib_link, iblink);
-DRIVER_STAT(port0_pkts, port0pkts);
-DRIVER_STAT(ether_spkts, ether_spkts);
-DRIVER_STAT(ether_rpkts, ether_rpkts);
-DRIVER_STAT(sma_spkts, sma_spkts);
-DRIVER_STAT(sma_rpkts, sma_rpkts);
-DRIVER_STAT(hdrq_full, hdrqfull);
-DRIVER_STAT(etid_full, etidfull);
-DRIVER_STAT(no_piobufs, nopiobufs);
-DRIVER_STAT(ports, ports);
-DRIVER_STAT(pkey0, pkeys[0]);
-DRIVER_STAT(pkey1, pkeys[1]);
-DRIVER_STAT(pkey2, pkeys[2]);
-DRIVER_STAT(pkey3, pkeys[3]);
-/* XXX fix the following when dynamic table of devices used */
-DRIVER_STAT(lid0, lid[0]);
-DRIVER_STAT(lid1, lid[1]);
-DRIVER_STAT(lid2, lid[2]);
-DRIVER_STAT(lid3, lid[3]);
-
-DRIVER_STAT(nports, nports);
-DRIVER_STAT(null_intr, nullintr);
-DRIVER_STAT(max_pkts_call, maxpkts_call);
-DRIVER_STAT(avg_pkts_call, avgpkts_call);
-DRIVER_STAT(page_locks, pagelocks);
-DRIVER_STAT(page_unlocks, pageunlocks);
-DRIVER_STAT(krdrops, krdrops);
-/* XXX fix the following when dynamic table of devices used */
-DRIVER_STAT(mlid0, mlid[0]);
-DRIVER_STAT(mlid1, mlid[1]);
-DRIVER_STAT(mlid2, mlid[2]);
-DRIVER_STAT(mlid3, mlid[3]);
-
-static struct attribute *driver_stat_attributes[] = {
- &driver_attr_intrs.attr,
- &driver_attr_err_intrs.attr,
- &driver_attr_errs.attr,
- &driver_attr_pkt_errs.attr,
- &driver_attr_crc_errs.attr,
- &driver_attr_hw_errs.attr,
- &driver_attr_ib_link.attr,
- &driver_attr_port0_pkts.attr,
- &driver_attr_ether_spkts.attr,
- &driver_attr_ether_rpkts.attr,
- &driver_attr_sma_spkts.attr,
- &driver_attr_sma_rpkts.attr,
- &driver_attr_hdrq_full.attr,
- &driver_attr_etid_full.attr,
- &driver_attr_no_piobufs.attr,
- &driver_attr_ports.attr,
- &driver_attr_pkey0.attr,
- &driver_attr_pkey1.attr,
- &driver_attr_pkey2.attr,
- &driver_attr_pkey3.attr,
- &driver_attr_lid0.attr,
- &driver_attr_lid1.attr,
- &driver_attr_lid2.attr,
- &driver_attr_lid3.attr,
- &driver_attr_nports.attr,
- &driver_attr_null_intr.attr,
- &driver_attr_max_pkts_call.attr,
- &driver_attr_avg_pkts_call.attr,
- &driver_attr_page_locks.attr,
- &driver_attr_page_unlocks.attr,
- &driver_attr_krdrops.attr,
- &driver_attr_mlid0.attr,
- &driver_attr_mlid1.attr,
- &driver_attr_mlid2.attr,
- &driver_attr_mlid3.attr,
- NULL
-};
-
-static struct attribute_group driver_stat_attr_group = {
- .name = "stats",
- .attrs = driver_stat_attributes
-};
-
static ssize_t show_status(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -272,23 +180,23 @@
size_t count)
{
struct ipath_devdata *dd = dev_get_drvdata(dev);
- u16 lid;
+ u16 lid = 0;
int ret;
ret = ipath_parse_ushort(buf, &lid);
if (ret < 0)
goto invalid;
- if (lid == 0 || lid >= 0xc000) {
+ if (lid == 0 || lid >= IPATH_MULTICAST_LID_BASE) {
ret = -EINVAL;
goto invalid;
}
- ipath_set_sps_lid(dd, lid, 0);
+ ipath_set_lid(dd, lid, 0);
goto bail;
invalid:
- ipath_dev_err(dd, "attempt to set invalid LID\n");
+ ipath_dev_err(dd, "attempt to set invalid LID 0x%x\n", lid);
bail:
return ret;
}
@@ -313,13 +221,12 @@
int ret;
ret = ipath_parse_ushort(buf, &mlid);
- if (ret < 0)
+ if (ret < 0 || mlid < IPATH_MULTICAST_LID_BASE)
goto invalid;
unit = dd->ipath_unit;
dd->ipath_mlid = mlid;
- ipath_stats.sps_mlid[unit] = mlid;
ipath_layer_intr(dd, IPATH_LAYER_INT_BCAST);
goto bail;
@@ -734,20 +641,12 @@
int ret;
ret = sysfs_create_group(&drv->kobj, &driver_attr_group);
- if (ret)
- goto bail;
- ret = sysfs_create_group(&drv->kobj, &driver_stat_attr_group);
- if (ret)
- sysfs_remove_group(&drv->kobj, &driver_attr_group);
-
-bail:
return ret;
}
void ipath_driver_remove_group(struct device_driver *drv)
{
- sysfs_remove_group(&drv->kobj, &driver_stat_attr_group);
sysfs_remove_group(&drv->kobj, &driver_attr_group);
}
diff --git a/drivers/infiniband/hw/ipath/ipath_uc.c b/drivers/infiniband/hw/ipath/ipath_uc.c
index 0d6dbc0..c33abea 100644
--- a/drivers/infiniband/hw/ipath/ipath_uc.c
+++ b/drivers/infiniband/hw/ipath/ipath_uc.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -31,7 +32,7 @@
*/
#include "ipath_verbs.h"
-#include "ips_common.h"
+#include "ipath_common.h"
/* cut down ridiculously long IB macro names */
#define OP(x) IB_OPCODE_UC_##x
@@ -61,90 +62,40 @@
}
/**
- * ipath_do_uc_send - do a send on a UC queue
- * @data: contains a pointer to the QP to send on
+ * ipath_make_uc_req - construct a request packet (SEND, RDMA write)
+ * @qp: a pointer to the QP
+ * @ohdr: a pointer to the IB header being constructed
+ * @pmtu: the path MTU
+ * @bth0p: pointer to the BTH opcode word
+ * @bth2p: pointer to the BTH PSN word
*
- * Process entries in the send work queue until the queue is exhausted.
- * Only allow one CPU to send a packet per QP (tasklet).
- * Otherwise, after we drop the QP lock, two threads could send
- * packets out of order.
- * This is similar to ipath_do_rc_send() below except we don't have
- * timeouts or resends.
+ * Return 1 if constructed; otherwise, return 0.
+ * Note the QP s_lock must be held and interrupts disabled.
*/
-void ipath_do_uc_send(unsigned long data)
+int ipath_make_uc_req(struct ipath_qp *qp,
+ struct ipath_other_headers *ohdr,
+ u32 pmtu, u32 *bth0p, u32 *bth2p)
{
- struct ipath_qp *qp = (struct ipath_qp *)data;
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
struct ipath_swqe *wqe;
- unsigned long flags;
- u16 lrh0;
u32 hwords;
- u32 nwords;
- u32 extra_bytes;
u32 bth0;
- u32 bth2;
- u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
u32 len;
- struct ipath_other_headers *ohdr;
struct ib_wc wc;
- if (test_and_set_bit(IPATH_S_BUSY, &qp->s_flags))
- goto bail;
-
- if (unlikely(qp->remote_ah_attr.dlid ==
- ipath_layer_get_lid(dev->dd))) {
- /* Pass in an uninitialized ib_wc to save stack space. */
- ipath_ruc_loopback(qp, &wc);
- clear_bit(IPATH_S_BUSY, &qp->s_flags);
- goto bail;
- }
-
- ohdr = &qp->s_hdr.u.oth;
- if (qp->remote_ah_attr.ah_flags & IB_AH_GRH)
- ohdr = &qp->s_hdr.u.l.oth;
-
-again:
- /* Check for a constructed packet to be sent. */
- if (qp->s_hdrwords != 0) {
- /*
- * If no PIO bufs are available, return.
- * An interrupt will call ipath_ib_piobufavail()
- * when one is available.
- */
- if (ipath_verbs_send(dev->dd, qp->s_hdrwords,
- (u32 *) &qp->s_hdr,
- qp->s_cur_size,
- qp->s_cur_sge)) {
- ipath_no_bufs_available(qp, dev);
- goto bail;
- }
- dev->n_unicast_xmit++;
- /* Record that we sent the packet and s_hdr is empty. */
- qp->s_hdrwords = 0;
- }
-
- lrh0 = IPS_LRH_BTH;
- /* header size in 32-bit words LRH+BTH = (8+12)/4. */
- hwords = 5;
-
- /*
- * The lock is needed to synchronize between
- * setting qp->s_ack_state and post_send().
- */
- spin_lock_irqsave(&qp->s_lock, flags);
-
if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK))
goto done;
- bth0 = ipath_layer_get_pkey(dev->dd, qp->s_pkey_index);
+ /* header size in 32-bit words LRH+BTH = (8+12)/4. */
+ hwords = 5;
+ bth0 = 0;
- /* Send a request. */
+ /* Get the next send request. */
wqe = get_swqe_ptr(qp, qp->s_last);
switch (qp->s_state) {
default:
/*
- * Signal the completion of the last send (if there is
- * one).
+ * Signal the completion of the last send
+ * (if there is one).
*/
if (qp->s_last != qp->s_tail)
complete_last_send(qp, wqe, &wc);
@@ -257,61 +208,16 @@
}
break;
}
- bth2 = qp->s_next_psn++ & IPS_PSN_MASK;
qp->s_len -= len;
- bth0 |= qp->s_state << 24;
-
- spin_unlock_irqrestore(&qp->s_lock, flags);
-
- /* Construct the header. */
- extra_bytes = (4 - len) & 3;
- nwords = (len + extra_bytes) >> 2;
- if (unlikely(qp->remote_ah_attr.ah_flags & IB_AH_GRH)) {
- /* Header size in 32-bit words. */
- hwords += 10;
- lrh0 = IPS_LRH_GRH;
- qp->s_hdr.u.l.grh.version_tclass_flow =
- cpu_to_be32((6 << 28) |
- (qp->remote_ah_attr.grh.traffic_class
- << 20) |
- qp->remote_ah_attr.grh.flow_label);
- qp->s_hdr.u.l.grh.paylen =
- cpu_to_be16(((hwords - 12) + nwords +
- SIZE_OF_CRC) << 2);
- /* next_hdr is defined by C8-7 in ch. 8.4.1 */
- qp->s_hdr.u.l.grh.next_hdr = 0x1B;
- qp->s_hdr.u.l.grh.hop_limit =
- qp->remote_ah_attr.grh.hop_limit;
- /* The SGID is 32-bit aligned. */
- qp->s_hdr.u.l.grh.sgid.global.subnet_prefix =
- dev->gid_prefix;
- qp->s_hdr.u.l.grh.sgid.global.interface_id =
- ipath_layer_get_guid(dev->dd);
- qp->s_hdr.u.l.grh.dgid = qp->remote_ah_attr.grh.dgid;
- }
qp->s_hdrwords = hwords;
qp->s_cur_sge = &qp->s_sge;
qp->s_cur_size = len;
- lrh0 |= qp->remote_ah_attr.sl << 4;
- qp->s_hdr.lrh[0] = cpu_to_be16(lrh0);
- /* DEST LID */
- qp->s_hdr.lrh[1] = cpu_to_be16(qp->remote_ah_attr.dlid);
- qp->s_hdr.lrh[2] = cpu_to_be16(hwords + nwords + SIZE_OF_CRC);
- qp->s_hdr.lrh[3] = cpu_to_be16(ipath_layer_get_lid(dev->dd));
- bth0 |= extra_bytes << 20;
- ohdr->bth[0] = cpu_to_be32(bth0);
- ohdr->bth[1] = cpu_to_be32(qp->remote_qpn);
- ohdr->bth[2] = cpu_to_be32(bth2);
-
- /* Check for more work to do. */
- goto again;
+ *bth0p = bth0 | (qp->s_state << 24);
+ *bth2p = qp->s_next_psn++ & IPATH_PSN_MASK;
+ return 1;
done:
- spin_unlock_irqrestore(&qp->s_lock, flags);
- clear_bit(IPATH_S_BUSY, &qp->s_flags);
-
-bail:
- return;
+ return 0;
}
/**
@@ -335,7 +241,6 @@
u32 hdrsize;
u32 psn;
u32 pad;
- unsigned long flags;
struct ib_wc wc;
u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
struct ib_reth *reth;
@@ -373,8 +278,6 @@
wc.imm_data = 0;
wc.wc_flags = 0;
- spin_lock_irqsave(&qp->r_rq.lock, flags);
-
/* Compare the PSN verses the expected PSN. */
if (unlikely(ipath_cmp24(psn, qp->r_psn) != 0)) {
/*
@@ -535,12 +438,13 @@
if (qp->r_len != 0) {
u32 rkey = be32_to_cpu(reth->rkey);
u64 vaddr = be64_to_cpu(reth->vaddr);
+ int ok;
/* Check rkey */
- if (unlikely(!ipath_rkey_ok(
- dev, &qp->r_sge, qp->r_len,
- vaddr, rkey,
- IB_ACCESS_REMOTE_WRITE))) {
+ ok = ipath_rkey_ok(dev, &qp->r_sge, qp->r_len,
+ vaddr, rkey,
+ IB_ACCESS_REMOTE_WRITE);
+ if (unlikely(!ok)) {
dev->n_pkt_drops++;
goto done;
}
@@ -558,8 +462,7 @@
}
if (opcode == OP(RDMA_WRITE_ONLY))
goto rdma_last;
- else if (opcode ==
- OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE))
+ else if (opcode == OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE))
goto rdma_last_imm;
/* FALLTHROUGH */
case OP(RDMA_WRITE_MIDDLE):
@@ -592,9 +495,9 @@
dev->n_pkt_drops++;
goto done;
}
- if (qp->r_reuse_sge) {
+ if (qp->r_reuse_sge)
qp->r_reuse_sge = 0;
- } else if (!ipath_get_rwqe(qp, 1)) {
+ else if (!ipath_get_rwqe(qp, 1)) {
dev->n_pkt_drops++;
goto done;
}
@@ -631,15 +534,11 @@
default:
/* Drop packet for unknown opcodes. */
- spin_unlock_irqrestore(&qp->r_rq.lock, flags);
dev->n_pkt_drops++;
- goto bail;
+ goto done;
}
qp->r_psn++;
qp->r_state = opcode;
done:
- spin_unlock_irqrestore(&qp->r_rq.lock, flags);
-
-bail:
return;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c
index e606daf..3466129 100644
--- a/drivers/infiniband/hw/ipath/ipath_ud.c
+++ b/drivers/infiniband/hw/ipath/ipath_ud.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -33,7 +34,7 @@
#include <rdma/ib_smi.h>
#include "ipath_verbs.h"
-#include "ips_common.h"
+#include "ipath_common.h"
/**
* ipath_ud_loopback - handle send on loopback QPs
@@ -274,6 +275,11 @@
len += wr->sg_list[i].length;
ss.num_sge++;
}
+ /* Check for invalid packet size. */
+ if (len > ipath_layer_get_ibmtu(dev->dd)) {
+ ret = -EINVAL;
+ goto bail;
+ }
extra_bytes = (4 - len) & 3;
nwords = (len + extra_bytes) >> 2;
@@ -283,8 +289,8 @@
ret = -EINVAL;
goto bail;
}
- if (ah_attr->dlid >= IPS_MULTICAST_LID_BASE) {
- if (ah_attr->dlid != IPS_PERMISSIVE_LID)
+ if (ah_attr->dlid >= IPATH_MULTICAST_LID_BASE) {
+ if (ah_attr->dlid != IPATH_PERMISSIVE_LID)
dev->n_multicast_xmit++;
else
dev->n_unicast_xmit++;
@@ -304,7 +310,7 @@
if (ah_attr->ah_flags & IB_AH_GRH) {
/* Header size in 32-bit words. */
hwords = 17;
- lrh0 = IPS_LRH_GRH;
+ lrh0 = IPATH_LRH_GRH;
ohdr = &qp->s_hdr.u.l.oth;
qp->s_hdr.u.l.grh.version_tclass_flow =
cpu_to_be32((6 << 28) |
@@ -330,7 +336,7 @@
} else {
/* Header size in 32-bit words. */
hwords = 7;
- lrh0 = IPS_LRH_BTH;
+ lrh0 = IPATH_LRH_BTH;
ohdr = &qp->s_hdr.u.oth;
}
if (wr->opcode == IB_WR_SEND_WITH_IMM) {
@@ -361,18 +367,18 @@
if (wr->send_flags & IB_SEND_SOLICITED)
bth0 |= 1 << 23;
bth0 |= extra_bytes << 20;
- bth0 |= qp->ibqp.qp_type == IB_QPT_SMI ? IPS_DEFAULT_P_KEY :
+ bth0 |= qp->ibqp.qp_type == IB_QPT_SMI ? IPATH_DEFAULT_P_KEY :
ipath_layer_get_pkey(dev->dd, qp->s_pkey_index);
ohdr->bth[0] = cpu_to_be32(bth0);
/*
* Use the multicast QP if the destination LID is a multicast LID.
*/
- ohdr->bth[1] = ah_attr->dlid >= IPS_MULTICAST_LID_BASE &&
- ah_attr->dlid != IPS_PERMISSIVE_LID ?
- __constant_cpu_to_be32(IPS_MULTICAST_QPN) :
+ ohdr->bth[1] = ah_attr->dlid >= IPATH_MULTICAST_LID_BASE &&
+ ah_attr->dlid != IPATH_PERMISSIVE_LID ?
+ __constant_cpu_to_be32(IPATH_MULTICAST_QPN) :
cpu_to_be32(wr->wr.ud.remote_qpn);
/* XXX Could lose a PSN count but not worth locking */
- ohdr->bth[2] = cpu_to_be32(qp->s_next_psn++ & IPS_PSN_MASK);
+ ohdr->bth[2] = cpu_to_be32(qp->s_next_psn++ & IPATH_PSN_MASK);
/*
* Qkeys with the high order bit set mean use the
* qkey from the QP context instead of the WR (see 10.2.5).
@@ -463,7 +469,7 @@
src_qp = be32_to_cpu(ohdr->u.ud.deth[1]);
}
}
- src_qp &= IPS_QPN_MASK;
+ src_qp &= IPATH_QPN_MASK;
/*
* Check that the permissive LID is only used on QP0
@@ -554,7 +560,16 @@
spin_lock_irqsave(&rq->lock, flags);
if (rq->tail == rq->head) {
spin_unlock_irqrestore(&rq->lock, flags);
- dev->n_pkt_drops++;
+ /*
+ * Count VL15 packets dropped due to no receive buffer.
+ * Otherwise, count them as buffer overruns since usually,
+ * the HW will be able to receive packets even if there are
+ * no QPs with posted receive buffers.
+ */
+ if (qp->ibqp.qp_num == 0)
+ dev->n_vl15_dropped++;
+ else
+ dev->rcv_errors++;
goto bail;
}
/* Silently drop packets which are too big. */
@@ -612,7 +627,7 @@
/*
* Save the LMC lower bits if the destination LID is a unicast LID.
*/
- wc.dlid_path_bits = dlid >= IPS_MULTICAST_LID_BASE ? 0 :
+ wc.dlid_path_bits = dlid >= IPATH_MULTICAST_LID_BASE ? 0 :
dlid & ((1 << (dev->mkeyprot_resv_lmc & 7)) - 1);
/* Signal completion event if the solicited bit is set. */
ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
diff --git a/drivers/infiniband/hw/ipath/ipath_user_pages.c b/drivers/infiniband/hw/ipath/ipath_user_pages.c
index 2bb08af..e32fca9 100644
--- a/drivers/infiniband/hw/ipath/ipath_user_pages.c
+++ b/drivers/infiniband/hw/ipath/ipath_user_pages.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -57,17 +58,6 @@
size_t got;
int ret;
-#if 0
- /*
- * XXX - causes MPI programs to fail, haven't had time to check
- * yet
- */
- if (!capable(CAP_IPC_LOCK)) {
- ret = -EPERM;
- goto bail;
- }
-#endif
-
lock_limit = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >>
PAGE_SHIFT;
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index 28fdbda..56ac336 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -36,7 +37,7 @@
#include "ipath_kernel.h"
#include "ipath_verbs.h"
-#include "ips_common.h"
+#include "ipath_common.h"
/* Not static, because we don't want the compiler removing it */
const char ipath_verbs_version[] = "ipath_verbs " IPATH_IDSTR;
@@ -55,9 +56,62 @@
module_param_named(debug, ib_ipath_debug, uint, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(debug, "Verbs debug mask");
+static unsigned int ib_ipath_max_pds = 0xFFFF;
+module_param_named(max_pds, ib_ipath_max_pds, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_pds,
+ "Maximum number of protection domains to support");
+
+static unsigned int ib_ipath_max_ahs = 0xFFFF;
+module_param_named(max_ahs, ib_ipath_max_ahs, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_ahs, "Maximum number of address handles to support");
+
+unsigned int ib_ipath_max_cqes = 0x2FFFF;
+module_param_named(max_cqes, ib_ipath_max_cqes, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_cqes,
+ "Maximum number of completion queue entries to support");
+
+unsigned int ib_ipath_max_cqs = 0x1FFFF;
+module_param_named(max_cqs, ib_ipath_max_cqs, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_cqs, "Maximum number of completion queues to support");
+
+unsigned int ib_ipath_max_qp_wrs = 0x3FFF;
+module_param_named(max_qp_wrs, ib_ipath_max_qp_wrs, uint,
+ S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_qp_wrs, "Maximum number of QP WRs to support");
+
+unsigned int ib_ipath_max_sges = 0x60;
+module_param_named(max_sges, ib_ipath_max_sges, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_sges, "Maximum number of SGEs to support");
+
+unsigned int ib_ipath_max_mcast_grps = 16384;
+module_param_named(max_mcast_grps, ib_ipath_max_mcast_grps, uint,
+ S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_mcast_grps,
+ "Maximum number of multicast groups to support");
+
+unsigned int ib_ipath_max_mcast_qp_attached = 16;
+module_param_named(max_mcast_qp_attached, ib_ipath_max_mcast_qp_attached,
+ uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_mcast_qp_attached,
+ "Maximum number of attached QPs to support");
+
+unsigned int ib_ipath_max_srqs = 1024;
+module_param_named(max_srqs, ib_ipath_max_srqs, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_srqs, "Maximum number of SRQs to support");
+
+unsigned int ib_ipath_max_srq_sges = 128;
+module_param_named(max_srq_sges, ib_ipath_max_srq_sges,
+ uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_srq_sges, "Maximum number of SRQ SGEs to support");
+
+unsigned int ib_ipath_max_srq_wrs = 0x1FFFF;
+module_param_named(max_srq_wrs, ib_ipath_max_srq_wrs,
+ uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_srq_wrs, "Maximum number of SRQ WRs support");
+
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("PathScale <support@pathscale.com>");
-MODULE_DESCRIPTION("Pathscale InfiniPath driver");
+MODULE_AUTHOR("QLogic <support@pathscale.com>");
+MODULE_DESCRIPTION("QLogic InfiniPath driver");
const int ib_ipath_state_ops[IB_QPS_ERR + 1] = {
[IB_QPS_RESET] = 0,
@@ -193,7 +247,7 @@
switch (qp->ibqp.qp_type) {
case IB_QPT_UC:
case IB_QPT_RC:
- err = ipath_post_rc_send(qp, wr);
+ err = ipath_post_ruc_send(qp, wr);
break;
case IB_QPT_SMI:
@@ -375,7 +429,7 @@
/* Check for a valid destination LID (see ch. 7.11.1). */
lid = be16_to_cpu(hdr->lrh[1]);
- if (lid < IPS_MULTICAST_LID_BASE) {
+ if (lid < IPATH_MULTICAST_LID_BASE) {
lid &= ~((1 << (dev->mkeyprot_resv_lmc & 7)) - 1);
if (unlikely(lid != ipath_layer_get_lid(dev->dd))) {
dev->rcv_errors++;
@@ -385,9 +439,9 @@
/* Check for GRH */
lnh = be16_to_cpu(hdr->lrh[0]) & 3;
- if (lnh == IPS_LRH_BTH)
+ if (lnh == IPATH_LRH_BTH)
ohdr = &hdr->u.oth;
- else if (lnh == IPS_LRH_GRH)
+ else if (lnh == IPATH_LRH_GRH)
ohdr = &hdr->u.l.oth;
else {
dev->rcv_errors++;
@@ -399,8 +453,8 @@
dev->opstats[opcode].n_packets++;
/* Get the destination QP number. */
- qp_num = be32_to_cpu(ohdr->bth[1]) & IPS_QPN_MASK;
- if (qp_num == IPS_MULTICAST_QPN) {
+ qp_num = be32_to_cpu(ohdr->bth[1]) & IPATH_QPN_MASK;
+ if (qp_num == IPATH_MULTICAST_QPN) {
struct ipath_mcast *mcast;
struct ipath_mcast_qp *p;
@@ -411,7 +465,7 @@
}
dev->n_multicast_rcv++;
list_for_each_entry_rcu(p, &mcast->qp_list, list)
- ipath_qp_rcv(dev, hdr, lnh == IPS_LRH_GRH, data,
+ ipath_qp_rcv(dev, hdr, lnh == IPATH_LRH_GRH, data,
tlen, p->qp);
/*
* Notify ipath_multicast_detach() if it is waiting for us
@@ -423,7 +477,7 @@
qp = ipath_lookup_qpn(&dev->qp_table, qp_num);
if (qp) {
dev->n_unicast_rcv++;
- ipath_qp_rcv(dev, hdr, lnh == IPS_LRH_GRH, data,
+ ipath_qp_rcv(dev, hdr, lnh == IPATH_LRH_GRH, data,
tlen, qp);
/*
* Notify ipath_destroy_qp() if it is waiting
@@ -567,40 +621,38 @@
struct ib_device_attr *props)
{
struct ipath_ibdev *dev = to_idev(ibdev);
- u32 vendor, boardrev, majrev, minrev;
memset(props, 0, sizeof(*props));
props->device_cap_flags = IB_DEVICE_BAD_PKEY_CNTR |
IB_DEVICE_BAD_QKEY_CNTR | IB_DEVICE_SHUTDOWN_PORT |
IB_DEVICE_SYS_IMAGE_GUID;
- ipath_layer_query_device(dev->dd, &vendor, &boardrev,
- &majrev, &minrev);
- props->vendor_id = vendor;
- props->vendor_part_id = boardrev;
- props->hw_ver = boardrev << 16 | majrev << 8 | minrev;
+ props->vendor_id = ipath_layer_get_vendorid(dev->dd);
+ props->vendor_part_id = ipath_layer_get_deviceid(dev->dd);
+ props->hw_ver = ipath_layer_get_pcirev(dev->dd);
props->sys_image_guid = dev->sys_image_guid;
props->max_mr_size = ~0ull;
- props->max_qp = 0xffff;
- props->max_qp_wr = 0xffff;
- props->max_sge = 255;
- props->max_cq = 0xffff;
- props->max_cqe = 0xffff;
- props->max_mr = 0xffff;
- props->max_pd = 0xffff;
+ props->max_qp = dev->qp_table.max;
+ props->max_qp_wr = ib_ipath_max_qp_wrs;
+ props->max_sge = ib_ipath_max_sges;
+ props->max_cq = ib_ipath_max_cqs;
+ props->max_ah = ib_ipath_max_ahs;
+ props->max_cqe = ib_ipath_max_cqes;
+ props->max_mr = dev->lk_table.max;
+ props->max_pd = ib_ipath_max_pds;
props->max_qp_rd_atom = 1;
props->max_qp_init_rd_atom = 1;
/* props->max_res_rd_atom */
- props->max_srq = 0xffff;
- props->max_srq_wr = 0xffff;
- props->max_srq_sge = 255;
+ props->max_srq = ib_ipath_max_srqs;
+ props->max_srq_wr = ib_ipath_max_srq_wrs;
+ props->max_srq_sge = ib_ipath_max_srq_sges;
/* props->local_ca_ack_delay */
props->atomic_cap = IB_ATOMIC_HCA;
props->max_pkeys = ipath_layer_get_npkeys(dev->dd);
- props->max_mcast_grp = 0xffff;
- props->max_mcast_qp_attach = 0xffff;
+ props->max_mcast_grp = ib_ipath_max_mcast_grps;
+ props->max_mcast_qp_attach = ib_ipath_max_mcast_qp_attached;
props->max_total_mcast_qp_attach = props->max_mcast_qp_attach *
props->max_mcast_grp;
@@ -643,10 +695,10 @@
ipath_layer_get_lastibcstat(dev->dd) & 0xf];
props->port_cap_flags = dev->port_cap_flags;
props->gid_tbl_len = 1;
- props->max_msg_sz = 4096;
+ props->max_msg_sz = 0x80000000;
props->pkey_tbl_len = ipath_layer_get_npkeys(dev->dd);
props->bad_pkey_cntr = ipath_layer_get_cr_errpkey(dev->dd) -
- dev->n_pkey_violations;
+ dev->z_pkey_violations;
props->qkey_viol_cntr = dev->qkey_violations;
props->active_width = IB_WIDTH_4X;
/* See rate_show() */
@@ -743,15 +795,30 @@
struct ib_ucontext *context,
struct ib_udata *udata)
{
+ struct ipath_ibdev *dev = to_idev(ibdev);
struct ipath_pd *pd;
struct ib_pd *ret;
+ /*
+ * This is actually totally arbitrary. Some correctness tests
+ * assume there's a maximum number of PDs that can be allocated.
+ * We don't actually have this limit, but we fail the test if
+ * we allow allocations of more than we report for this value.
+ */
+
+ if (dev->n_pds_allocated == ib_ipath_max_pds) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
+
pd = kmalloc(sizeof *pd, GFP_KERNEL);
if (!pd) {
ret = ERR_PTR(-ENOMEM);
goto bail;
}
+ dev->n_pds_allocated++;
+
/* ib_alloc_pd() will initialize pd->ibpd. */
pd->user = udata != NULL;
@@ -764,6 +831,9 @@
static int ipath_dealloc_pd(struct ib_pd *ibpd)
{
struct ipath_pd *pd = to_ipd(ibpd);
+ struct ipath_ibdev *dev = to_idev(ibpd->device);
+
+ dev->n_pds_allocated--;
kfree(pd);
@@ -782,21 +852,40 @@
{
struct ipath_ah *ah;
struct ib_ah *ret;
+ struct ipath_ibdev *dev = to_idev(pd->device);
+
+ if (dev->n_ahs_allocated == ib_ipath_max_ahs) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
/* A multicast address requires a GRH (see ch. 8.4.1). */
- if (ah_attr->dlid >= IPS_MULTICAST_LID_BASE &&
- ah_attr->dlid != IPS_PERMISSIVE_LID &&
+ if (ah_attr->dlid >= IPATH_MULTICAST_LID_BASE &&
+ ah_attr->dlid != IPATH_PERMISSIVE_LID &&
!(ah_attr->ah_flags & IB_AH_GRH)) {
ret = ERR_PTR(-EINVAL);
goto bail;
}
+ if (ah_attr->dlid == 0) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+
+ if (ah_attr->port_num < 1 ||
+ ah_attr->port_num > pd->device->phys_port_cnt) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+
ah = kmalloc(sizeof *ah, GFP_ATOMIC);
if (!ah) {
ret = ERR_PTR(-ENOMEM);
goto bail;
}
+ dev->n_ahs_allocated++;
+
/* ib_create_ah() will initialize ah->ibah. */
ah->attr = *ah_attr;
@@ -814,8 +903,11 @@
*/
static int ipath_destroy_ah(struct ib_ah *ibah)
{
+ struct ipath_ibdev *dev = to_idev(ibah->device);
struct ipath_ah *ah = to_iah(ibah);
+ dev->n_ahs_allocated--;
+
kfree(ah);
return 0;
@@ -889,6 +981,7 @@
*/
static void *ipath_register_ib_device(int unit, struct ipath_devdata *dd)
{
+ struct ipath_layer_counters cntrs;
struct ipath_ibdev *idev;
struct ib_device *dev;
int ret;
@@ -939,6 +1032,25 @@
idev->pma_counter_select[5] = IB_PMA_PORT_XMIT_WAIT;
idev->link_width_enabled = 3; /* 1x or 4x */
+ /* Snapshot current HW counters to "clear" them. */
+ ipath_layer_get_counters(dd, &cntrs);
+ idev->z_symbol_error_counter = cntrs.symbol_error_counter;
+ idev->z_link_error_recovery_counter =
+ cntrs.link_error_recovery_counter;
+ idev->z_link_downed_counter = cntrs.link_downed_counter;
+ idev->z_port_rcv_errors = cntrs.port_rcv_errors;
+ idev->z_port_rcv_remphys_errors =
+ cntrs.port_rcv_remphys_errors;
+ idev->z_port_xmit_discards = cntrs.port_xmit_discards;
+ idev->z_port_xmit_data = cntrs.port_xmit_data;
+ idev->z_port_rcv_data = cntrs.port_rcv_data;
+ idev->z_port_xmit_packets = cntrs.port_xmit_packets;
+ idev->z_port_rcv_packets = cntrs.port_rcv_packets;
+ idev->z_local_link_integrity_errors =
+ cntrs.local_link_integrity_errors;
+ idev->z_excessive_buffer_overrun_errors =
+ cntrs.excessive_buffer_overrun_errors;
+
/*
* The system image GUID is supposed to be the same for all
* IB HCAs in a single system but since there can be other
@@ -1109,11 +1221,8 @@
{
struct ipath_ibdev *dev =
container_of(cdev, struct ipath_ibdev, ibdev.class_dev);
- int vendor, boardrev, majrev, minrev;
- ipath_layer_query_device(dev->dd, &vendor, &boardrev,
- &majrev, &minrev);
- return sprintf(buf, "%d.%d\n", majrev, minrev);
+ return sprintf(buf, "%x\n", ipath_layer_get_pcirev(dev->dd));
}
static ssize_t show_hca(struct class_device *cdev, char *buf)
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.h b/drivers/infiniband/hw/ipath/ipath_verbs.h
index 4f8d593..2df6847 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.h
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.h
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -148,6 +149,7 @@
struct list_head qp_list;
wait_queue_head_t wait;
atomic_t refcount;
+ int n_attached;
};
/* Memory region */
@@ -305,32 +307,34 @@
u32 s_next_psn; /* PSN for next request */
u32 s_last_psn; /* last response PSN processed */
u32 s_psn; /* current packet sequence number */
+ u32 s_ack_psn; /* PSN for RDMA_READ */
u32 s_rnr_timeout; /* number of milliseconds for RNR timeout */
- u32 s_ack_psn; /* PSN for next ACK or RDMA_READ */
- u64 s_ack_atomic; /* data for atomic ACK */
+ u32 r_ack_psn; /* PSN for next ACK or atomic ACK */
u64 r_wr_id; /* ID for current receive WQE */
u64 r_atomic_data; /* data for last atomic op */
u32 r_atomic_psn; /* PSN of last atomic op */
u32 r_len; /* total length of r_sge */
u32 r_rcv_len; /* receive data len processed */
u32 r_psn; /* expected rcv packet sequence number */
+ u32 r_msn; /* message sequence number */
u8 state; /* QP state */
u8 s_state; /* opcode of last packet sent */
u8 s_ack_state; /* opcode of packet to ACK */
u8 s_nak_state; /* non-zero if NAK is pending */
u8 r_state; /* opcode of last packet received */
+ u8 r_ack_state; /* opcode of packet to ACK */
+ u8 r_nak_state; /* non-zero if NAK is pending */
+ u8 r_min_rnr_timer; /* retry timeout value for RNR NAKs */
u8 r_reuse_sge; /* for UC receive errors */
u8 r_sge_inx; /* current index into sg_list */
- u8 s_max_sge; /* size of s_wq->sg_list */
u8 qp_access_flags;
+ u8 s_max_sge; /* size of s_wq->sg_list */
u8 s_retry_cnt; /* number of times to retry */
u8 s_rnr_retry_cnt;
- u8 s_min_rnr_timer;
u8 s_retry; /* requester retry counter */
u8 s_rnr_retry; /* requester RNR retry counter */
u8 s_pkey_index; /* PKEY index to use */
enum ib_mtu path_mtu;
- atomic_t msn; /* message sequence number */
u32 remote_qpn;
u32 qkey; /* QKEY for this QP (for UD or RD) */
u32 s_size; /* send work queue size */
@@ -431,6 +435,11 @@
__be64 sys_image_guid; /* in network order */
__be64 gid_prefix; /* in network order */
__be64 mkey;
+ u32 n_pds_allocated; /* number of PDs allocated for device */
+ u32 n_ahs_allocated; /* number of AHs allocated for device */
+ u32 n_cqs_allocated; /* number of CQs allocated for device */
+ u32 n_srqs_allocated; /* number of SRQs allocated for device */
+ u32 n_mcast_grps_allocated; /* number of mcast groups allocated */
u64 ipath_sword; /* total dwords sent (sample result) */
u64 ipath_rword; /* total dwords received (sample result) */
u64 ipath_spkts; /* total packets sent (sample result) */
@@ -442,17 +451,19 @@
u64 n_unicast_rcv; /* total unicast packets received */
u64 n_multicast_xmit; /* total multicast packets sent */
u64 n_multicast_rcv; /* total multicast packets received */
- u64 n_symbol_error_counter; /* starting count for PMA */
- u64 n_link_error_recovery_counter; /* starting count for PMA */
- u64 n_link_downed_counter; /* starting count for PMA */
- u64 n_port_rcv_errors; /* starting count for PMA */
- u64 n_port_rcv_remphys_errors; /* starting count for PMA */
- u64 n_port_xmit_discards; /* starting count for PMA */
- u64 n_port_xmit_data; /* starting count for PMA */
- u64 n_port_rcv_data; /* starting count for PMA */
- u64 n_port_xmit_packets; /* starting count for PMA */
- u64 n_port_rcv_packets; /* starting count for PMA */
- u32 n_pkey_violations; /* starting count for PMA */
+ u64 z_symbol_error_counter; /* starting count for PMA */
+ u64 z_link_error_recovery_counter; /* starting count for PMA */
+ u64 z_link_downed_counter; /* starting count for PMA */
+ u64 z_port_rcv_errors; /* starting count for PMA */
+ u64 z_port_rcv_remphys_errors; /* starting count for PMA */
+ u64 z_port_xmit_discards; /* starting count for PMA */
+ u64 z_port_xmit_data; /* starting count for PMA */
+ u64 z_port_rcv_data; /* starting count for PMA */
+ u64 z_port_xmit_packets; /* starting count for PMA */
+ u64 z_port_rcv_packets; /* starting count for PMA */
+ u32 z_pkey_violations; /* starting count for PMA */
+ u32 z_local_link_integrity_errors; /* starting count for PMA */
+ u32 z_excessive_buffer_overrun_errors; /* starting count for PMA */
u32 n_rc_resends;
u32 n_rc_acks;
u32 n_rc_qacks;
@@ -462,6 +473,7 @@
u32 n_other_naks;
u32 n_timeouts;
u32 n_pkt_drops;
+ u32 n_vl15_dropped;
u32 n_wqe_errs;
u32 n_rdma_dup_busy;
u32 n_piowait;
@@ -580,10 +592,6 @@
void ipath_get_credit(struct ipath_qp *qp, u32 aeth);
-void ipath_do_rc_send(unsigned long data);
-
-void ipath_do_uc_send(unsigned long data);
-
void ipath_cq_enter(struct ipath_cq *cq, struct ib_wc *entry, int sig);
int ipath_rkey_ok(struct ipath_ibdev *dev, struct ipath_sge_state *ss,
@@ -596,7 +604,7 @@
void ipath_skip_sge(struct ipath_sge_state *ss, u32 length);
-int ipath_post_rc_send(struct ipath_qp *qp, struct ib_send_wr *wr);
+int ipath_post_ruc_send(struct ipath_qp *qp, struct ib_send_wr *wr);
void ipath_uc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
int has_grh, void *data, u32 tlen, struct ipath_qp *qp);
@@ -678,7 +686,19 @@
int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only);
-void ipath_ruc_loopback(struct ipath_qp *sqp, struct ib_wc *wc);
+u32 ipath_make_grh(struct ipath_ibdev *dev, struct ib_grh *hdr,
+ struct ib_global_route *grh, u32 hwords, u32 nwords);
+
+void ipath_do_ruc_send(unsigned long data);
+
+u32 ipath_make_rc_ack(struct ipath_qp *qp, struct ipath_other_headers *ohdr,
+ u32 pmtu);
+
+int ipath_make_rc_req(struct ipath_qp *qp, struct ipath_other_headers *ohdr,
+ u32 pmtu, u32 *bth0p, u32 *bth2p);
+
+int ipath_make_uc_req(struct ipath_qp *qp, struct ipath_other_headers *ohdr,
+ u32 pmtu, u32 *bth0p, u32 *bth2p);
extern const enum ib_wc_opcode ib_ipath_wc_opcode[];
@@ -688,6 +708,24 @@
extern unsigned int ib_ipath_lkey_table_size;
+extern unsigned int ib_ipath_max_cqes;
+
+extern unsigned int ib_ipath_max_cqs;
+
+extern unsigned int ib_ipath_max_qp_wrs;
+
+extern unsigned int ib_ipath_max_sges;
+
+extern unsigned int ib_ipath_max_mcast_grps;
+
+extern unsigned int ib_ipath_max_mcast_qp_attached;
+
+extern unsigned int ib_ipath_max_srqs;
+
+extern unsigned int ib_ipath_max_srq_sges;
+
+extern unsigned int ib_ipath_max_srq_wrs;
+
extern const u32 ib_ipath_rnr_table[];
#endif /* IPATH_VERBS_H */
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs_mcast.c b/drivers/infiniband/hw/ipath/ipath_verbs_mcast.c
index 10b31d2..ee0e1d9 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs_mcast.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs_mcast.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -92,6 +93,7 @@
INIT_LIST_HEAD(&mcast->qp_list);
init_waitqueue_head(&mcast->wait);
atomic_set(&mcast->refcount, 0);
+ mcast->n_attached = 0;
bail:
return mcast;
@@ -157,7 +159,8 @@
* the table but the QP was added. Return ESRCH if the QP was already
* attached and neither structure was added.
*/
-static int ipath_mcast_add(struct ipath_mcast *mcast,
+static int ipath_mcast_add(struct ipath_ibdev *dev,
+ struct ipath_mcast *mcast,
struct ipath_mcast_qp *mqp)
{
struct rb_node **n = &mcast_tree.rb_node;
@@ -188,34 +191,47 @@
/* Search the QP list to see if this is already there. */
list_for_each_entry_rcu(p, &tmcast->qp_list, list) {
if (p->qp == mqp->qp) {
- spin_unlock_irqrestore(&mcast_lock, flags);
ret = ESRCH;
goto bail;
}
}
+ if (tmcast->n_attached == ib_ipath_max_mcast_qp_attached) {
+ ret = ENOMEM;
+ goto bail;
+ }
+
+ tmcast->n_attached++;
+
list_add_tail_rcu(&mqp->list, &tmcast->qp_list);
- spin_unlock_irqrestore(&mcast_lock, flags);
ret = EEXIST;
goto bail;
}
+ if (dev->n_mcast_grps_allocated == ib_ipath_max_mcast_grps) {
+ ret = ENOMEM;
+ goto bail;
+ }
+
+ dev->n_mcast_grps_allocated++;
+
list_add_tail_rcu(&mqp->list, &mcast->qp_list);
atomic_inc(&mcast->refcount);
rb_link_node(&mcast->rb_node, pn, n);
rb_insert_color(&mcast->rb_node, &mcast_tree);
- spin_unlock_irqrestore(&mcast_lock, flags);
-
ret = 0;
bail:
+ spin_unlock_irqrestore(&mcast_lock, flags);
+
return ret;
}
int ipath_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
{
struct ipath_qp *qp = to_iqp(ibqp);
+ struct ipath_ibdev *dev = to_idev(ibqp->device);
struct ipath_mcast *mcast;
struct ipath_mcast_qp *mqp;
int ret;
@@ -235,7 +251,7 @@
ret = -ENOMEM;
goto bail;
}
- switch (ipath_mcast_add(mcast, mqp)) {
+ switch (ipath_mcast_add(dev, mcast, mqp)) {
case ESRCH:
/* Neither was used: can't attach the same QP twice. */
ipath_mcast_qp_free(mqp);
@@ -245,6 +261,12 @@
case EEXIST: /* The mcast wasn't used */
ipath_mcast_free(mcast);
break;
+ case ENOMEM:
+ /* Exceeded the maximum number of mcast groups. */
+ ipath_mcast_qp_free(mqp);
+ ipath_mcast_free(mcast);
+ ret = -ENOMEM;
+ goto bail;
default:
break;
}
@@ -258,6 +280,7 @@
int ipath_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
{
struct ipath_qp *qp = to_iqp(ibqp);
+ struct ipath_ibdev *dev = to_idev(ibqp->device);
struct ipath_mcast *mcast = NULL;
struct ipath_mcast_qp *p, *tmp;
struct rb_node *n;
@@ -272,7 +295,7 @@
while (1) {
if (n == NULL) {
spin_unlock_irqrestore(&mcast_lock, flags);
- ret = 0;
+ ret = -EINVAL;
goto bail;
}
@@ -296,6 +319,7 @@
* link until we are sure there are no list walkers.
*/
list_del_rcu(&p->list);
+ mcast->n_attached--;
/* If this was the last attached QP, remove the GID too. */
if (list_empty(&mcast->qp_list)) {
@@ -319,6 +343,7 @@
atomic_dec(&mcast->refcount);
wait_event(mcast->wait, !atomic_read(&mcast->refcount));
ipath_mcast_free(mcast);
+ dev->n_mcast_grps_allocated--;
}
ret = 0;
diff --git a/drivers/infiniband/hw/ipath/ipath_wc_x86_64.c b/drivers/infiniband/hw/ipath/ipath_wc_x86_64.c
index adc5322..f8f9e2e 100644
--- a/drivers/infiniband/hw/ipath/ipath_wc_x86_64.c
+++ b/drivers/infiniband/hw/ipath/ipath_wc_x86_64.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
diff --git a/drivers/infiniband/hw/ipath/ips_common.h b/drivers/infiniband/hw/ipath/ips_common.h
deleted file mode 100644
index ab7cbbb..0000000
--- a/drivers/infiniband/hw/ipath/ips_common.h
+++ /dev/null
@@ -1,263 +0,0 @@
-#ifndef IPS_COMMON_H
-#define IPS_COMMON_H
-/*
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include "ipath_common.h"
-
-struct ipath_header {
- /*
- * Version - 4 bits, Port - 4 bits, TID - 10 bits and Offset -
- * 14 bits before ECO change ~28 Dec 03. After that, Vers 4,
- * Port 3, TID 11, offset 14.
- */
- __le32 ver_port_tid_offset;
- __le16 chksum;
- __le16 pkt_flags;
-};
-
-struct ips_message_header {
- __be16 lrh[4];
- __be32 bth[3];
- /* fields below this point are in host byte order */
- struct ipath_header iph;
- __u8 sub_opcode;
- __u8 flags;
- __u16 src_rank;
- /* 24 bits. The upper 8 bit is available for other use */
- union {
- struct {
- unsigned ack_seq_num:24;
- unsigned port:4;
- unsigned unused:4;
- };
- __u32 ack_seq_num_org;
- };
- __u8 expected_tid_session_id;
- __u8 tinylen; /* to aid MPI */
- union {
- __u16 tag; /* to aid MPI */
- __u16 mqhdr; /* for PSM MQ */
- };
- union {
- __u32 mpi[4]; /* to aid MPI */
- __u32 data[4];
- __u64 mq[2]; /* for PSM MQ */
- struct {
- __u16 mtu;
- __u8 major_ver;
- __u8 minor_ver;
- __u32 not_used; //free
- __u32 run_id;
- __u32 client_ver;
- };
- };
-};
-
-struct ether_header {
- __be16 lrh[4];
- __be32 bth[3];
- struct ipath_header iph;
- __u8 sub_opcode;
- __u8 cmd;
- __be16 lid;
- __u16 mac[3];
- __u8 frag_num;
- __u8 seq_num;
- __le32 len;
- /* MUST be of word size due to PIO write requirements */
- __le32 csum;
- __le16 csum_offset;
- __le16 flags;
- __u16 first_2_bytes;
- __u8 unused[2]; /* currently unused */
-};
-
-/*
- * The PIO buffer used for sending infinipath messages must only be written
- * in 32-bit words, all the data must be written, and no writes can occur
- * after the last word is written (which transfers "ownership" of the buffer
- * to the chip and triggers the message to be sent).
- * Since the Linux sk_buff structure can be recursive, non-aligned, and
- * any number of bytes in each segment, we use the following structure
- * to keep information about the overall state of the copy operation.
- * This is used to save the information needed to store the checksum
- * in the right place before sending the last word to the hardware and
- * to buffer the last 0-3 bytes of non-word sized segments.
- */
-struct copy_data_s {
- struct ether_header *hdr;
- /* addr of PIO buf to write csum to */
- __u32 __iomem *csum_pio;
- __u32 __iomem *to; /* addr of PIO buf to write data to */
- __u32 device; /* which device to allocate PIO bufs from */
- __s32 error; /* set if there is an error. */
- __s32 extra; /* amount of data saved in u.buf below */
- __u32 len; /* total length to send in bytes */
- __u32 flen; /* frament length in words */
- __u32 csum; /* partial IP checksum */
- __u32 pos; /* position for partial checksum */
- __u32 offset; /* offset to where data currently starts */
- __s32 checksum_calc; /* set to 1 when csum has been calculated */
- struct sk_buff *skb;
- union {
- __u32 w;
- __u8 buf[4];
- } u;
-};
-
-/* IB - LRH header consts */
-#define IPS_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */
-#define IPS_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */
-
-#define IPS_OFFSET 0
-
-/*
- * defines the cut-off point between the header queue and eager/expected
- * TID queue
- */
-#define NUM_OF_EXTRA_WORDS_IN_HEADER_QUEUE \
- ((sizeof(struct ips_message_header) - \
- offsetof(struct ips_message_header, iph)) >> 2)
-
-/* OpCodes */
-#define OPCODE_IPS 0xC0
-#define OPCODE_ITH4X 0xC1
-
-/* OpCode 30 is use by stand-alone test programs */
-#define OPCODE_RAW_DATA 0xDE
-/* last OpCode (31) is reserved for test */
-#define OPCODE_TEST 0xDF
-
-/* sub OpCodes - ips */
-#define OPCODE_SEQ_DATA 0x01
-#define OPCODE_SEQ_CTRL 0x02
-
-#define OPCODE_SEQ_MQ_DATA 0x03
-#define OPCODE_SEQ_MQ_CTRL 0x04
-
-#define OPCODE_ACK 0x10
-#define OPCODE_NAK 0x11
-
-#define OPCODE_ERR_CHK 0x20
-#define OPCODE_ERR_CHK_PLS 0x21
-
-#define OPCODE_STARTUP 0x30
-#define OPCODE_STARTUP_ACK 0x31
-#define OPCODE_STARTUP_NAK 0x32
-
-#define OPCODE_STARTUP_EXT 0x34
-#define OPCODE_STARTUP_ACK_EXT 0x35
-#define OPCODE_STARTUP_NAK_EXT 0x36
-
-#define OPCODE_TIDS_RELEASE 0x40
-#define OPCODE_TIDS_RELEASE_CONFIRM 0x41
-
-#define OPCODE_CLOSE 0x50
-#define OPCODE_CLOSE_ACK 0x51
-/*
- * like OPCODE_CLOSE, but no complaint if other side has already closed.
- * Used when doing abort(), MPI_Abort(), etc.
- */
-#define OPCODE_ABORT 0x52
-
-/* sub OpCodes - ith4x */
-#define OPCODE_ENCAP 0x81
-#define OPCODE_LID_ARP 0x82
-
-/* Receive Header Queue: receive type (from infinipath) */
-#define RCVHQ_RCV_TYPE_EXPECTED 0
-#define RCVHQ_RCV_TYPE_EAGER 1
-#define RCVHQ_RCV_TYPE_NON_KD 2
-#define RCVHQ_RCV_TYPE_ERROR 3
-
-/* misc. */
-#define SIZE_OF_CRC 1
-
-#define EAGER_TID_ID INFINIPATH_I_TID_MASK
-
-#define IPS_DEFAULT_P_KEY 0xFFFF
-
-#define IPS_PERMISSIVE_LID 0xFFFF
-#define IPS_MULTICAST_LID_BASE 0xC000
-
-#define IPS_AETH_CREDIT_SHIFT 24
-#define IPS_AETH_CREDIT_MASK 0x1F
-#define IPS_AETH_CREDIT_INVAL 0x1F
-
-#define IPS_PSN_MASK 0xFFFFFF
-#define IPS_MSN_MASK 0xFFFFFF
-#define IPS_QPN_MASK 0xFFFFFF
-#define IPS_MULTICAST_QPN 0xFFFFFF
-
-/* functions for extracting fields from rcvhdrq entries */
-static inline __u32 ips_get_hdr_err_flags(const __le32 * rbuf)
-{
- return __le32_to_cpu(rbuf[1]);
-}
-
-static inline __u32 ips_get_index(const __le32 * rbuf)
-{
- return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_EGRINDEX_SHIFT)
- & INFINIPATH_RHF_EGRINDEX_MASK;
-}
-
-static inline __u32 ips_get_rcv_type(const __le32 * rbuf)
-{
- return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_RCVTYPE_SHIFT)
- & INFINIPATH_RHF_RCVTYPE_MASK;
-}
-
-static inline __u32 ips_get_length_in_bytes(const __le32 * rbuf)
-{
- return ((__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_LENGTH_SHIFT)
- & INFINIPATH_RHF_LENGTH_MASK) << 2;
-}
-
-static inline void *ips_get_first_protocol_header(const __u32 * rbuf)
-{
- return (void *)&rbuf[2];
-}
-
-static inline struct ips_message_header *ips_get_ips_header(const __u32 *
- rbuf)
-{
- return (struct ips_message_header *)&rbuf[2];
-}
-
-static inline __u32 ips_get_ipath_ver(__le32 hdrword)
-{
- return (__le32_to_cpu(hdrword) >> INFINIPATH_I_VERS_SHIFT)
- & INFINIPATH_I_VERS_MASK;
-}
-
-#endif /* IPS_COMMON_H */
diff --git a/drivers/infiniband/hw/ipath/verbs_debug.h b/drivers/infiniband/hw/ipath/verbs_debug.h
index 40d693c..6186676 100644
--- a/drivers/infiniband/hw/ipath/verbs_debug.h
+++ b/drivers/infiniband/hw/ipath/verbs_debug.h
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c
index d536217..a29b1b6 100644
--- a/drivers/infiniband/hw/mthca/mthca_eq.c
+++ b/drivers/infiniband/hw/mthca/mthca_eq.c
@@ -900,7 +900,7 @@
mthca_is_memfree(dev) ?
mthca_arbel_interrupt :
mthca_tavor_interrupt,
- SA_SHIRQ, DRV_NAME, dev);
+ IRQF_SHARED, DRV_NAME, dev);
if (err)
goto err_out_cmd;
dev->eq_table.have_irq = 1;
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index 1f0e720..1e03153 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -352,7 +352,7 @@
for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) {
pxa_gpio_mode(CORGI_GPIO_KEY_SENSE(i) | GPIO_IN);
if (request_irq(CORGI_IRQ_GPIO_KEY_SENSE(i), corgikbd_interrupt,
- SA_INTERRUPT | SA_TRIGGER_RISING,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING,
"corgikbd", corgikbd))
printk(KERN_WARNING "corgikbd: Can't get IRQ: %d!\n", i);
}
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index c5d03fb..e385710 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -410,7 +410,7 @@
for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++) {
pxa_gpio_mode(spitz_senses[i] | GPIO_IN);
if (request_irq(IRQ_GPIO(spitz_senses[i]), spitzkbd_interrupt,
- SA_INTERRUPT|SA_TRIGGER_RISING,
+ IRQF_DISABLED|IRQF_TRIGGER_RISING,
"Spitzkbd Sense", spitzkbd))
printk(KERN_WARNING "spitzkbd: Can't get Sense IRQ: %d!\n", i);
}
@@ -425,19 +425,19 @@
pxa_gpio_mode(SPITZ_GPIO_SWB | GPIO_IN);
request_irq(SPITZ_IRQ_GPIO_SYNC, spitzkbd_interrupt,
- SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd Sync", spitzkbd);
request_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd_interrupt,
- SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd PwrOn", spitzkbd);
request_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd_hinge_isr,
- SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd SWA", spitzkbd);
request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr,
- SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd SWB", spitzkbd);
request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr,
- SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd HP", spitzkbd);
printk(KERN_INFO "input: Spitz Keyboard Registered\n");
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
index 3a6ae85c..805b636 100644
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -113,7 +113,7 @@
input_dev->event = ixp4xx_spkr_event;
err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt,
- SA_INTERRUPT | SA_TIMER, "ixp4xx-beeper", (void *) dev->id);
+ IRQF_DISABLED | IRQF_TIMER, "ixp4xx-beeper", (void *) dev->id);
if (err)
goto err_free_device;
diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c
index 09b6ffd..872b30b 100644
--- a/drivers/input/mouse/rpcmouse.c
+++ b/drivers/input/mouse/rpcmouse.c
@@ -85,7 +85,7 @@
rpcmouse_lastx = (short) iomd_readl(IOMD_MOUSEX);
rpcmouse_lasty = (short) iomd_readl(IOMD_MOUSEY);
- if (request_irq(IRQ_VSYNCPULSE, rpcmouse_irq, SA_SHIRQ, "rpcmouse", rpcmouse_dev)) {
+ if (request_irq(IRQ_VSYNCPULSE, rpcmouse_irq, IRQF_SHARED, "rpcmouse", rpcmouse_dev)) {
printk(KERN_ERR "rpcmouse: unable to allocate VSYNC interrupt\n");
input_free_device(rpcmouse_dev);
return -EBUSY;
diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c
index 22d02d5..cde036a 100644
--- a/drivers/input/serio/gscps2.c
+++ b/drivers/input/serio/gscps2.c
@@ -370,7 +370,7 @@
serio->dev.parent = &dev->dev;
ret = -EBUSY;
- if (request_irq(dev->irq, gscps2_interrupt, SA_SHIRQ, ps2port->port->name, ps2port))
+ if (request_irq(dev->irq, gscps2_interrupt, IRQF_SHARED, ps2port->port->name, ps2port))
goto fail_miserably;
if (ps2port->id != GSC_ID_KEYBOARD && ps2port->id != GSC_ID_MOUSE) {
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 7fa4bc2..06a3f25 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -328,7 +328,7 @@
return 0;
if (request_irq(port->irq, i8042_interrupt,
- SA_SHIRQ, "i8042", i8042_request_irq_cookie)) {
+ IRQF_SHARED, "i8042", i8042_request_irq_cookie)) {
printk(KERN_ERR "i8042.c: Can't get irq %d for %s, unregistering the port.\n", port->irq, port->name);
goto irq_fail;
}
@@ -610,7 +610,7 @@
*/
if (request_irq(i8042_ports[I8042_AUX_PORT_NO].irq, i8042_interrupt,
- SA_SHIRQ, "i8042", &i8042_check_aux_cookie))
+ IRQF_SHARED, "i8042", &i8042_check_aux_cookie))
return -1;
free_irq(i8042_ports[I8042_AUX_PORT_NO].irq, &i8042_check_aux_cookie);
diff --git a/drivers/input/serio/pcips2.c b/drivers/input/serio/pcips2.c
index 1e139c5..fb727c6 100644
--- a/drivers/input/serio/pcips2.c
+++ b/drivers/input/serio/pcips2.c
@@ -107,7 +107,7 @@
outb(PS2_CTRL_ENABLE, ps2if->base);
pcips2_flush_input(ps2if);
- ret = request_irq(ps2if->dev->irq, pcips2_interrupt, SA_SHIRQ,
+ ret = request_irq(ps2if->dev->irq, pcips2_interrupt, IRQF_SHARED,
"pcips2", ps2if);
if (ret == 0)
val = PS2_CTRL_ENABLE | PS2_CTRL_RXIRQ;
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 386023c..66e411b 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -773,7 +773,7 @@
ts->last_msg = m;
- if (request_irq(spi->irq, ads7846_irq, SA_TRIGGER_FALLING,
+ if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING,
spi->dev.driver->name, ts)) {
dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
err = -EBUSY;
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index b3eaf23..9b66271 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -318,7 +318,7 @@
corgi_ssp_ads7846_putget((5u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
mdelay(5);
- if (request_irq(corgi_ts->irq_gpio, ts_interrupt, SA_INTERRUPT, "ts", corgi_ts)) {
+ if (request_irq(corgi_ts->irq_gpio, ts_interrupt, IRQF_DISABLED, "ts", corgi_ts)) {
err = -EBUSY;
goto fail;
}
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index 2de2139..e2b9100 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -399,14 +399,14 @@
set_GPIO_IRQ_edge(GPIO_BITSY_NPOWER_BUTTON, GPIO_RISING_EDGE);
if (request_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, action_button_handler,
- SA_SHIRQ | SA_INTERRUPT, "h3600_action", &ts->dev)) {
+ IRQF_SHARED | IRQF_DISABLED, "h3600_action", &ts->dev)) {
printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n");
err = -EBUSY;
goto fail2;
}
if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler,
- SA_SHIRQ | SA_INTERRUPT, "h3600_suspend", &ts->dev)) {
+ IRQF_SHARED | IRQF_DISABLED, "h3600_suspend", &ts->dev)) {
printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n");
err = -EBUSY;
goto fail3;
diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c
index 957dd5a..fa97e0f 100644
--- a/drivers/input/touchscreen/hp680_ts_input.c
+++ b/drivers/input/touchscreen/hp680_ts_input.c
@@ -109,7 +109,7 @@
input_register_device(hp680_ts_dev);
if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt,
- SA_INTERRUPT, MODNAME, 0) < 0) {
+ IRQF_DISABLED, MODNAME, 0) < 0) {
printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n",
HP680_TS_IRQ);
input_unregister_device(hp680_ts_dev);
diff --git a/drivers/isdn/hardware/avm/b1pci.c b/drivers/isdn/hardware/avm/b1pci.c
index 7edf19b..90e2e66 100644
--- a/drivers/isdn/hardware/avm/b1pci.c
+++ b/drivers/isdn/hardware/avm/b1pci.c
@@ -97,7 +97,7 @@
b1_reset(card->port);
b1_getrevision(card);
- retval = request_irq(card->irq, b1_interrupt, SA_SHIRQ, card->name, card);
+ retval = request_irq(card->irq, b1_interrupt, IRQF_SHARED, card->name, card);
if (retval) {
printk(KERN_ERR "b1pci: unable to get IRQ %d.\n", card->irq);
retval = -EBUSY;
@@ -234,7 +234,7 @@
b1dma_reset(card);
b1_getrevision(card);
- retval = request_irq(card->irq, b1dma_interrupt, SA_SHIRQ, card->name, card);
+ retval = request_irq(card->irq, b1dma_interrupt, IRQF_SHARED, card->name, card);
if (retval) {
printk(KERN_ERR "b1pci: unable to get IRQ %d.\n",
card->irq);
diff --git a/drivers/isdn/hardware/avm/b1pcmcia.c b/drivers/isdn/hardware/avm/b1pcmcia.c
index ad50251..e479c0a 100644
--- a/drivers/isdn/hardware/avm/b1pcmcia.c
+++ b/drivers/isdn/hardware/avm/b1pcmcia.c
@@ -82,7 +82,7 @@
card->irq = irq;
card->cardtype = cardtype;
- retval = request_irq(card->irq, b1_interrupt, SA_SHIRQ, card->name, card);
+ retval = request_irq(card->irq, b1_interrupt, IRQF_SHARED, card->name, card);
if (retval) {
printk(KERN_ERR "b1pcmcia: unable to get IRQ %d.\n",
card->irq);
diff --git a/drivers/isdn/hardware/avm/c4.c b/drivers/isdn/hardware/avm/c4.c
index e7924a5..6c3d5f5 100644
--- a/drivers/isdn/hardware/avm/c4.c
+++ b/drivers/isdn/hardware/avm/c4.c
@@ -1172,7 +1172,7 @@
}
c4_reset(card);
- retval = request_irq(card->irq, c4_interrupt, SA_SHIRQ, card->name, card);
+ retval = request_irq(card->irq, c4_interrupt, IRQF_SHARED, card->name, card);
if (retval) {
printk(KERN_ERR "c4: unable to get IRQ %d.\n",card->irq);
retval = -EBUSY;
diff --git a/drivers/isdn/hardware/avm/t1pci.c b/drivers/isdn/hardware/avm/t1pci.c
index af85511..d1e253c 100644
--- a/drivers/isdn/hardware/avm/t1pci.c
+++ b/drivers/isdn/hardware/avm/t1pci.c
@@ -103,7 +103,7 @@
}
b1dma_reset(card);
- retval = request_irq(card->irq, b1dma_interrupt, SA_SHIRQ, card->name, card);
+ retval = request_irq(card->irq, b1dma_interrupt, IRQF_SHARED, card->name, card);
if (retval) {
printk(KERN_ERR "t1pci: unable to get IRQ %d.\n", card->irq);
retval = -EBUSY;
diff --git a/drivers/isdn/hardware/eicon/divasmain.c b/drivers/isdn/hardware/eicon/divasmain.c
index b05e35f..b7dadba 100644
--- a/drivers/isdn/hardware/eicon/divasmain.c
+++ b/drivers/isdn/hardware/eicon/divasmain.c
@@ -486,7 +486,7 @@
int diva_os_register_irq(void *context, byte irq, const char *name)
{
int result = request_irq(irq, diva_os_irq_wrapper,
- SA_INTERRUPT | SA_SHIRQ, name, context);
+ IRQF_DISABLED | IRQF_SHARED, name, context);
return (result);
}
diff --git a/drivers/isdn/hisax/avm_a1p.c b/drivers/isdn/hisax/avm_a1p.c
index d643bb3..574e252 100644
--- a/drivers/isdn/hisax/avm_a1p.c
+++ b/drivers/isdn/hisax/avm_a1p.c
@@ -255,7 +255,7 @@
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &AVM_card_msg;
- cs->irq_flags = SA_SHIRQ;
+ cs->irq_flags = IRQF_SHARED;
cs->irq_func = &avm_a1p_interrupt;
ISACVersion(cs, "AVM A1 PCMCIA:");
diff --git a/drivers/isdn/hisax/avm_pci.c b/drivers/isdn/hisax/avm_pci.c
index 93f3a53..04f5917 100644
--- a/drivers/isdn/hisax/avm_pci.c
+++ b/drivers/isdn/hisax/avm_pci.c
@@ -808,7 +808,7 @@
printk(KERN_WARNING "FritzPCI: No PCI card found\n");
return(0);
}
- cs->irq_flags |= SA_SHIRQ;
+ cs->irq_flags |= IRQF_SHARED;
#else
printk(KERN_WARNING "FritzPCI: NO_PCI_BIOS\n");
return (0);
diff --git a/drivers/isdn/hisax/bkm_a4t.c b/drivers/isdn/hisax/bkm_a4t.c
index de28cb5..3cf1f24 100644
--- a/drivers/isdn/hisax/bkm_a4t.c
+++ b/drivers/isdn/hisax/bkm_a4t.c
@@ -335,7 +335,7 @@
cs->BC_Send_Data = &jade_fill_fifo;
cs->cardmsg = &BKM_card_msg;
cs->irq_func = &bkm_interrupt;
- cs->irq_flags |= SA_SHIRQ;
+ cs->irq_flags |= IRQF_SHARED;
ISACVersion(cs, "Telekom A4T:");
/* Jade version */
JadeVersion(cs, "Telekom A4T:");
diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
index 9d1abfb..15681f3 100644
--- a/drivers/isdn/hisax/bkm_a8.c
+++ b/drivers/isdn/hisax/bkm_a8.c
@@ -374,7 +374,7 @@
pci_ioaddr5 &= PCI_BASE_ADDRESS_IO_MASK;
/* Take over */
cs->irq = pci_irq;
- cs->irq_flags |= SA_SHIRQ;
+ cs->irq_flags |= IRQF_SHARED;
/* pci_ioaddr1 is unique to all subdevices */
/* pci_ioaddr2 is for the fourth subdevice only */
/* pci_ioaddr3 is for the third subdevice only */
diff --git a/drivers/isdn/hisax/diva.c b/drivers/isdn/hisax/diva.c
index fbb9d02..323a02e 100644
--- a/drivers/isdn/hisax/diva.c
+++ b/drivers/isdn/hisax/diva.c
@@ -1076,7 +1076,7 @@
printk(KERN_WARNING "Diva: No IO-Adr for PCI card found\n");
return(0);
}
- cs->irq_flags |= SA_SHIRQ;
+ cs->irq_flags |= IRQF_SHARED;
#else
printk(KERN_WARNING "Diva: cfgreg 0 and NO_PCI_BIOS\n");
printk(KERN_WARNING "Diva: unable to config DIVA PCI\n");
diff --git a/drivers/isdn/hisax/elsa.c b/drivers/isdn/hisax/elsa.c
index 7a5cdb1..3b3e318 100644
--- a/drivers/isdn/hisax/elsa.c
+++ b/drivers/isdn/hisax/elsa.c
@@ -85,8 +85,8 @@
*** ***/
/* Config-Register (Read) */
-#define ELSA_TIMER_RUN 0x02 /* Bit 1 des Config-Reg */
-#define ELSA_TIMER_RUN_PCC8 0x01 /* Bit 0 des Config-Reg bei PCC */
+#define ELIRQF_TIMER_RUN 0x02 /* Bit 1 des Config-Reg */
+#define ELIRQF_TIMER_RUN_PCC8 0x01 /* Bit 0 des Config-Reg bei PCC */
#define ELSA_IRQ_IDX 0x38 /* Bit 3,4,5 des Config-Reg */
#define ELSA_IRQ_IDX_PCC8 0x30 /* Bit 4,5 des Config-Reg */
#define ELSA_IRQ_IDX_PC 0x0c /* Bit 2,3 des Config-Reg */
@@ -102,7 +102,7 @@
#define ELSA_S0_POWER_BAD 0x08 /* Bit 3 S0-Bus Spannung fehlt */
/* Status Flags */
-#define ELSA_TIMER_AKTIV 1
+#define ELIRQF_TIMER_AKTIV 1
#define ELSA_BAD_PWR 2
#define ELSA_ASSIGN 4
@@ -259,10 +259,10 @@
v = bytein(cs->hw.elsa.cfg);
if ((cs->subtyp == ELSA_QS1000) || (cs->subtyp == ELSA_QS3000))
- return (0 == (v & ELSA_TIMER_RUN));
+ return (0 == (v & ELIRQF_TIMER_RUN));
else if (cs->subtyp == ELSA_PCC8)
- return (v & ELSA_TIMER_RUN_PCC8);
- return (v & ELSA_TIMER_RUN);
+ return (v & ELIRQF_TIMER_RUN_PCC8);
+ return (v & ELIRQF_TIMER_RUN);
}
/*
* fast interrupt HSCX stuff goes here
@@ -334,7 +334,7 @@
writereg(cs->hw.elsa.ale, cs->hw.elsa.hscx, HSCX_MASK, 0xFF);
writereg(cs->hw.elsa.ale, cs->hw.elsa.hscx, HSCX_MASK + 0x40, 0xFF);
writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, ISAC_MASK, 0xFF);
- if (cs->hw.elsa.status & ELSA_TIMER_AKTIV) {
+ if (cs->hw.elsa.status & ELIRQF_TIMER_AKTIV) {
if (!TimerRun(cs)) {
/* Timer Restart */
byteout(cs->hw.elsa.timer, 0);
@@ -685,7 +685,7 @@
spin_lock_irqsave(&cs->lock, flags);
cs->hw.elsa.counter = 0;
cs->hw.elsa.ctrl_reg |= ELSA_ENA_TIMER_INT;
- cs->hw.elsa.status |= ELSA_TIMER_AKTIV;
+ cs->hw.elsa.status |= ELIRQF_TIMER_AKTIV;
byteout(cs->hw.elsa.ctrl, cs->hw.elsa.ctrl_reg);
byteout(cs->hw.elsa.timer, 0);
spin_unlock_irqrestore(&cs->lock, flags);
@@ -693,7 +693,7 @@
spin_lock_irqsave(&cs->lock, flags);
cs->hw.elsa.ctrl_reg &= ~ELSA_ENA_TIMER_INT;
byteout(cs->hw.elsa.ctrl, cs->hw.elsa.ctrl_reg);
- cs->hw.elsa.status &= ~ELSA_TIMER_AKTIV;
+ cs->hw.elsa.status &= ~ELIRQF_TIMER_AKTIV;
spin_unlock_irqrestore(&cs->lock, flags);
printk(KERN_INFO "Elsa: %d timer tics in 110 msek\n",
cs->hw.elsa.counter);
@@ -1012,7 +1012,7 @@
cs->hw.elsa.timer = 0;
cs->hw.elsa.trig = 0;
cs->hw.elsa.ctrl = 0;
- cs->irq_flags |= SA_SHIRQ;
+ cs->irq_flags |= IRQF_SHARED;
printk(KERN_INFO
"Elsa: %s defined at %#lx IRQ %d\n",
Elsa_Types[cs->subtyp],
@@ -1061,7 +1061,7 @@
test_and_set_bit(HW_IPAC, &cs->HW_Flags);
cs->hw.elsa.timer = 0;
cs->hw.elsa.trig = 0;
- cs->irq_flags |= SA_SHIRQ;
+ cs->irq_flags |= IRQF_SHARED;
printk(KERN_INFO
"Elsa: %s defined at %#lx/0x%x IRQ %d\n",
Elsa_Types[cs->subtyp],
diff --git a/drivers/isdn/hisax/enternow_pci.c b/drivers/isdn/hisax/enternow_pci.c
index 5f48761..8fcbe2e 100644
--- a/drivers/isdn/hisax/enternow_pci.c
+++ b/drivers/isdn/hisax/enternow_pci.c
@@ -405,7 +405,7 @@
cs->BC_Send_Data = &netjet_fill_dma;
cs->cardmsg = &enpci_card_msg;
cs->irq_func = &enpci_interrupt;
- cs->irq_flags |= SA_SHIRQ;
+ cs->irq_flags |= IRQF_SHARED;
return (1);
}
diff --git a/drivers/isdn/hisax/gazel.c b/drivers/isdn/hisax/gazel.c
index 82a1d2e..3e7d923 100644
--- a/drivers/isdn/hisax/gazel.c
+++ b/drivers/isdn/hisax/gazel.c
@@ -592,7 +592,7 @@
cs->hw.gazel.hscxfifo[0] = cs->hw.gazel.hscx[0];
cs->hw.gazel.hscxfifo[1] = cs->hw.gazel.hscx[1];
cs->irq = pci_irq;
- cs->irq_flags |= SA_SHIRQ;
+ cs->irq_flags |= IRQF_SHARED;
switch (seekcard) {
case PCI_DEVICE_ID_PLX_R685:
diff --git a/drivers/isdn/hisax/hfc4s8s_l1.c b/drivers/isdn/hisax/hfc4s8s_l1.c
index 913fd27..0f967b3 100644
--- a/drivers/isdn/hisax/hfc4s8s_l1.c
+++ b/drivers/isdn/hisax/hfc4s8s_l1.c
@@ -1552,7 +1552,7 @@
INIT_WORK(&hw->tqueue, (void *) (void *) hfc4s8s_bh, hw);
if (request_irq
- (hw->irq, hfc4s8s_interrupt, SA_SHIRQ, hw->card_name, hw)) {
+ (hw->irq, hfc4s8s_interrupt, IRQF_SHARED, hw->card_name, hw)) {
printk(KERN_INFO
"HFC-4S/8S: unable to alloc irq %d, card ignored\n",
hw->irq);
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index fa96157..7241e73 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -1732,7 +1732,7 @@
cs->BC_Read_Reg = NULL;
cs->BC_Write_Reg = NULL;
cs->irq_func = &hfcpci_interrupt;
- cs->irq_flags |= SA_SHIRQ;
+ cs->irq_flags |= IRQF_SHARED;
cs->hw.hfcpci.timer.function = (void *) hfcpci_Timer;
cs->hw.hfcpci.timer.data = (long) cs;
init_timer(&cs->hw.hfcpci.timer);
diff --git a/drivers/isdn/hisax/hisax_fcpcipnp.c b/drivers/isdn/hisax/hisax_fcpcipnp.c
index dbcca28..1d7cf3b 100644
--- a/drivers/isdn/hisax/hisax_fcpcipnp.c
+++ b/drivers/isdn/hisax/hisax_fcpcipnp.c
@@ -725,11 +725,11 @@
switch (adapter->type) {
case AVM_FRITZ_PCIV2:
- retval = request_irq(adapter->irq, fcpci2_irq, SA_SHIRQ,
+ retval = request_irq(adapter->irq, fcpci2_irq, IRQF_SHARED,
"fcpcipnp", adapter);
break;
case AVM_FRITZ_PCI:
- retval = request_irq(adapter->irq, fcpci_irq, SA_SHIRQ,
+ retval = request_irq(adapter->irq, fcpci_irq, IRQF_SHARED,
"fcpcipnp", adapter);
break;
case AVM_FRITZ_PNP:
diff --git a/drivers/isdn/hisax/niccy.c b/drivers/isdn/hisax/niccy.c
index 868762c..79a97b1 100644
--- a/drivers/isdn/hisax/niccy.c
+++ b/drivers/isdn/hisax/niccy.c
@@ -336,7 +336,7 @@
printk(KERN_WARNING "Niccy: No PCI card found\n");
return(0);
}
- cs->irq_flags |= SA_SHIRQ;
+ cs->irq_flags |= IRQF_SHARED;
cs->hw.niccy.isac = pci_ioaddr + ISAC_PCI_DATA;
cs->hw.niccy.isac_ale = pci_ioaddr + ISAC_PCI_ADDR;
cs->hw.niccy.hscx = pci_ioaddr + HSCX_PCI_DATA;
diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c
index 1b3ac46..e5b900a 100644
--- a/drivers/isdn/hisax/nj_s.c
+++ b/drivers/isdn/hisax/nj_s.c
@@ -271,7 +271,7 @@
setup_isac(cs);
cs->cardmsg = &NETjet_S_card_msg;
cs->irq_func = &netjet_s_interrupt;
- cs->irq_flags |= SA_SHIRQ;
+ cs->irq_flags |= IRQF_SHARED;
ISACVersion(cs, "NETjet-S:");
return (1);
}
diff --git a/drivers/isdn/hisax/nj_u.c b/drivers/isdn/hisax/nj_u.c
index 7a6010e..7002b09 100644
--- a/drivers/isdn/hisax/nj_u.c
+++ b/drivers/isdn/hisax/nj_u.c
@@ -237,7 +237,7 @@
cs->BC_Send_Data = &netjet_fill_dma;
cs->cardmsg = &NETjet_U_card_msg;
cs->irq_func = &netjet_u_interrupt;
- cs->irq_flags |= SA_SHIRQ;
+ cs->irq_flags |= IRQF_SHARED;
ICCVersion(cs, "NETspider-U:");
return (1);
}
diff --git a/drivers/isdn/hisax/sedlbauer.c b/drivers/isdn/hisax/sedlbauer.c
index 11ea456..8d8e8a2 100644
--- a/drivers/isdn/hisax/sedlbauer.c
+++ b/drivers/isdn/hisax/sedlbauer.c
@@ -632,7 +632,7 @@
printk(KERN_WARNING "Sedlbauer: No PCI card found\n");
return(0);
}
- cs->irq_flags |= SA_SHIRQ;
+ cs->irq_flags |= IRQF_SHARED;
cs->hw.sedl.bus = SEDL_BUS_PCI;
sub_vendor_id = dev_sedl->subsystem_vendor;
sub_id = dev_sedl->subsystem_device;
@@ -809,7 +809,7 @@
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_HSCX;
cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
- cs->irq_flags |= SA_SHIRQ;
+ cs->irq_flags |= IRQF_SHARED;
} else {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ISAC;
diff --git a/drivers/isdn/hisax/teles3.c b/drivers/isdn/hisax/teles3.c
index 090abd1..5cb7124 100644
--- a/drivers/isdn/hisax/teles3.c
+++ b/drivers/isdn/hisax/teles3.c
@@ -369,7 +369,7 @@
cs->hw.teles3.hscx[1] + 96);
return (0);
}
- cs->irq_flags |= SA_SHIRQ; /* cardbus can share */
+ cs->irq_flags |= IRQF_SHARED; /* cardbus can share */
} else {
if (cs->hw.teles3.cfg_reg) {
if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
diff --git a/drivers/isdn/hisax/telespci.c b/drivers/isdn/hisax/telespci.c
index a1bb73e..9382cdf 100644
--- a/drivers/isdn/hisax/telespci.c
+++ b/drivers/isdn/hisax/telespci.c
@@ -347,7 +347,7 @@
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &TelesPCI_card_msg;
cs->irq_func = &telespci_interrupt;
- cs->irq_flags |= SA_SHIRQ;
+ cs->irq_flags |= IRQF_SHARED;
ISACVersion(cs, "TelesPCI:");
if (HscxVersion(cs, "TelesPCI:")) {
printk(KERN_WARNING
diff --git a/drivers/isdn/hisax/w6692.c b/drivers/isdn/hisax/w6692.c
index 00e4fa2..6c68419 100644
--- a/drivers/isdn/hisax/w6692.c
+++ b/drivers/isdn/hisax/w6692.c
@@ -1080,7 +1080,7 @@
cs->BC_Send_Data = &W6692B_fill_fifo;
cs->cardmsg = &w6692_card_msg;
cs->irq_func = &W6692_interrupt;
- cs->irq_flags |= SA_SHIRQ;
+ cs->irq_flags |= IRQF_SHARED;
W6692Version(cs, "W6692:");
printk(KERN_INFO "W6692 ISTA=0x%X\n", ReadW6692(cs, W_ISTA));
printk(KERN_INFO "W6692 IMASK=0x%X\n", ReadW6692(cs, W_IMASK));
diff --git a/drivers/isdn/hysdn/boardergo.c b/drivers/isdn/hysdn/boardergo.c
index 89fd531..73afebd 100644
--- a/drivers/isdn/hysdn/boardergo.c
+++ b/drivers/isdn/hysdn/boardergo.c
@@ -435,7 +435,7 @@
}
ergo_stopcard(card); /* disable interrupts */
- if (request_irq(card->irq, ergo_interrupt, SA_SHIRQ, "HYSDN", card)) {
+ if (request_irq(card->irq, ergo_interrupt, IRQF_SHARED, "HYSDN", card)) {
ergo_releasehardware(card); /* return the acquired hardware */
return (-1);
}
diff --git a/drivers/isdn/sc/init.c b/drivers/isdn/sc/init.c
index 62b7acf..a627e68 100644
--- a/drivers/isdn/sc/init.c
+++ b/drivers/isdn/sc/init.c
@@ -342,7 +342,7 @@
*/
sc_adapter[cinst]->interrupt = irq[b];
if (request_irq(sc_adapter[cinst]->interrupt, interrupt_handler,
- SA_INTERRUPT, interface->id, NULL))
+ IRQF_DISABLED, interface->id, NULL))
{
kfree(sc_adapter[cinst]->channel);
indicate_status(cinst, ISDN_STAT_UNLOAD, 0, NULL); /* Fix me */
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index d832e10..40ae7b6 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -427,10 +427,10 @@
/* MacIO itself has a different reg, we use it's PCI base */
if (np == chip->of_node) {
- sprintf(dev->ofdev.dev.bus_id, "%1d.%016llx:%.*s",
+ sprintf(dev->ofdev.dev.bus_id, "%1d.%08x:%.*s",
chip->lbus.index,
#ifdef CONFIG_PCI
- (unsigned long long)pci_resource_start(chip->lbus.pdev, 0),
+ (unsigned int)pci_resource_start(chip->lbus.pdev, 0),
#else
0, /* NuBus may want to do something better here */
#endif
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index 0301305..ff6d9bf 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -555,7 +555,7 @@
if (smu->db_irq != NO_IRQ) {
if (request_irq(smu->db_irq, smu_db_intr,
- SA_SHIRQ, "SMU doorbell", smu) < 0) {
+ IRQF_SHARED, "SMU doorbell", smu) < 0) {
printk(KERN_WARNING "SMU: can't "
"request interrupt %d\n",
smu->db_irq);
@@ -565,7 +565,7 @@
if (smu->msg_irq != NO_IRQ) {
if (request_irq(smu->msg_irq, smu_msg_intr,
- SA_SHIRQ, "SMU message", smu) < 0) {
+ IRQF_SHARED, "SMU message", smu) < 0) {
printk(KERN_WARNING "SMU: can't "
"request interrupt %d\n",
smu->msg_irq);
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index 8cdd4d2..b88451e 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -363,7 +363,7 @@
saa7146_write(dev, MC2, 0xf8000000);
/* request an interrupt for the saa7146 */
- err = request_irq(pci->irq, interrupt_hw, SA_SHIRQ | SA_INTERRUPT,
+ err = request_irq(pci->irq, interrupt_hw, IRQF_SHARED | IRQF_DISABLED,
dev->name, dev);
if (err < 0) {
ERR(("request_irq() failed.\n"));
diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c
index f0404170..eb2e643 100644
--- a/drivers/media/dvb/b2c2/flexcop-pci.c
+++ b/drivers/media/dvb/b2c2/flexcop-pci.c
@@ -294,7 +294,7 @@
pci_set_drvdata(fc_pci->pdev, fc_pci);
if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_isr,
- SA_SHIRQ, DRIVER_NAME, fc_pci)) != 0)
+ IRQF_SHARED, DRIVER_NAME, fc_pci)) != 0)
goto err_pci_iounmap;
spin_lock_init(&fc_pci->irq_lock);
diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c
index 761fa6e..755822e 100644
--- a/drivers/media/dvb/bt8xx/bt878.c
+++ b/drivers/media/dvb/bt8xx/bt878.c
@@ -488,7 +488,7 @@
btwrite(0, BT848_INT_MASK);
result = request_irq(bt->irq, bt878_irq,
- SA_SHIRQ | SA_INTERRUPT, "bt878",
+ IRQF_SHARED | IRQF_DISABLED, "bt878",
(void *) bt);
if (result == -EINVAL) {
printk(KERN_ERR "bt878(%d): Bad irq number or handler\n",
diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c
index acabea0..2310b2b 100644
--- a/drivers/media/dvb/pluto2/pluto2.c
+++ b/drivers/media/dvb/pluto2/pluto2.c
@@ -616,7 +616,7 @@
pci_set_drvdata(pdev, pluto);
- ret = request_irq(pdev->irq, pluto_irq, SA_SHIRQ, DRIVER_NAME, pluto);
+ ret = request_irq(pdev->irq, pluto_irq, IRQF_SHARED, DRIVER_NAME, pluto);
if (ret < 0)
goto err_pci_iounmap;
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index aa3203a..5764a89 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -4050,7 +4050,7 @@
/* disable irqs, register irq handler */
btwrite(0, BT848_INT_MASK);
result = request_irq(btv->c.pci->irq, bttv_irq,
- SA_SHIRQ | SA_INTERRUPT,btv->c.name,(void *)btv);
+ IRQF_SHARED | IRQF_DISABLED,btv->c.name,(void *)btv);
if (result < 0) {
printk(KERN_ERR "bttv%d: can't get IRQ %d\n",
bttv_num,btv->c.pci->irq);
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index 292a5e8..f034066 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -700,7 +700,7 @@
/* get irq */
err = request_irq(chip->pci->irq, cx8801_irq,
- SA_SHIRQ | SA_INTERRUPT, chip->core->name, chip);
+ IRQF_SHARED | IRQF_DISABLED, chip->core->name, chip);
if (err < 0) {
dprintk(0, "%s: can't get IRQ %d\n",
chip->core->name, chip->pci->irq);
diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c
index 2c12aca..138a4f6 100644
--- a/drivers/media/video/cx88/cx88-mpeg.c
+++ b/drivers/media/video/cx88/cx88-mpeg.c
@@ -438,7 +438,7 @@
/* get irq */
err = request_irq(dev->pci->irq, cx8802_irq,
- SA_SHIRQ | SA_INTERRUPT, dev->core->name, dev);
+ IRQF_SHARED | IRQF_DISABLED, dev->core->name, dev);
if (err < 0) {
printk(KERN_ERR "%s: can't get IRQ %d\n",
dev->core->name, dev->pci->irq);
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index c538d99..2225d4b 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1915,7 +1915,7 @@
/* get irq */
err = request_irq(pci_dev->irq, cx8800_irq,
- SA_SHIRQ | SA_INTERRUPT, core->name, dev);
+ IRQF_SHARED | IRQF_DISABLED, core->name, dev);
if (err < 0) {
printk(KERN_ERR "%s: can't get IRQ %d\n",
core->name,pci_dev->irq);
diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c
index ddd6221..e278753 100644
--- a/drivers/media/video/meye.c
+++ b/drivers/media/video/meye.c
@@ -1881,7 +1881,7 @@
meye.mchip_irq = pcidev->irq;
if (request_irq(meye.mchip_irq, meye_irq,
- SA_INTERRUPT | SA_SHIRQ, "meye", meye_irq)) {
+ IRQF_DISABLED | IRQF_SHARED, "meye", meye_irq)) {
printk(KERN_ERR "meye: request_irq failed\n");
goto outreqirq;
}
diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c
index d77e6a8..f1fd69e 100644
--- a/drivers/media/video/saa7134/saa7134-alsa.c
+++ b/drivers/media/video/saa7134/saa7134-alsa.c
@@ -929,7 +929,7 @@
err = request_irq(dev->pci->irq, saa7134_alsa_irq,
- SA_SHIRQ | SA_INTERRUPT, dev->name,
+ IRQF_SHARED | IRQF_DISABLED, dev->name,
(void*) &dev->dmasound);
if (err < 0) {
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 535172f..6e97cc8 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -923,7 +923,7 @@
/* get irq */
err = request_irq(pci_dev->irq, saa7134_irq,
- SA_SHIRQ | SA_INTERRUPT, dev->name, dev);
+ IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
if (err < 0) {
printk(KERN_ERR "%s: can't get IRQ %d\n",
dev->name,pci_dev->irq);
diff --git a/drivers/media/video/saa7134/saa7134-oss.c b/drivers/media/video/saa7134/saa7134-oss.c
index 7aa02b3..3895d05 100644
--- a/drivers/media/video/saa7134/saa7134-oss.c
+++ b/drivers/media/video/saa7134/saa7134-oss.c
@@ -845,7 +845,7 @@
{
if ((request_irq(dev->pci->irq, saa7134_oss_irq,
- SA_SHIRQ | SA_INTERRUPT, dev->name,
+ IRQF_SHARED | IRQF_DISABLED, dev->name,
(void*) &dev->dmasound)) < 0)
return -1;
diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c
index c18b31d..b36ba9f 100644
--- a/drivers/media/video/stradis.c
+++ b/drivers/media/video/stradis.c
@@ -1983,7 +1983,7 @@
memcpy(&saa->video_dev, &saa_template, sizeof(saa_template));
saawrite(0, SAA7146_IER); /* turn off all interrupts */
- retval = request_irq(saa->irq, saa7146_irq, SA_SHIRQ | SA_INTERRUPT,
+ retval = request_irq(saa->irq, saa7146_irq, IRQF_SHARED | IRQF_DISABLED,
"stradis", saa);
if (retval == -EINVAL)
dev_err(&pdev->dev, "%d: Bad irq number or handler\n", num);
diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c
index 33b32f3..f2249ed 100644
--- a/drivers/media/video/zoran_card.c
+++ b/drivers/media/video/zoran_card.c
@@ -1380,7 +1380,7 @@
result = request_irq(zr->pci_dev->irq,
zoran_irq,
- SA_SHIRQ | SA_INTERRUPT,
+ IRQF_SHARED | IRQF_DISABLED,
ZR_DEVNAME(zr),
(void *) zr);
if (result < 0) {
diff --git a/drivers/media/video/zr36120.c b/drivers/media/video/zr36120.c
index 6ac3b67..5043738 100644
--- a/drivers/media/video/zr36120.c
+++ b/drivers/media/video/zr36120.c
@@ -1858,7 +1858,7 @@
DEBUG(printk(KERN_DEBUG "zoran: mapped-memory at 0x%p\n",ztv->zoran_mem));
result = request_irq(dev->irq, zoran_irq,
- SA_SHIRQ|SA_INTERRUPT,"zoran", ztv);
+ IRQF_SHARED|IRQF_DISABLED,"zoran", ztv);
if (result==-EINVAL)
{
iounmap(ztv->zoran_mem);
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 2544fc7..5754360 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1705,7 +1705,7 @@
printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
ioc->name);
rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
- SA_SHIRQ, ioc->name, ioc);
+ IRQF_SHARED, ioc->name, ioc);
if (rc < 0) {
printk(MYIOC_s_ERR_FMT "Unable to allocate "
"interrupt %d!\n", ioc->name,
diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c
index 4f1515c..1b58444 100644
--- a/drivers/message/i2o/pci.c
+++ b/drivers/message/i2o/pci.c
@@ -274,7 +274,7 @@
writel(0xffffffff, c->irq_mask);
if (pdev->irq) {
- rc = request_irq(pdev->irq, i2o_pci_interrupt, SA_SHIRQ,
+ rc = request_irq(pdev->irq, i2o_pci_interrupt, IRQF_SHARED,
c->name, c);
if (rc < 0) {
printk(KERN_ERR "%s: unable to allocate interrupt %d."
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index 6fe2ff5..632bc21 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -508,7 +508,7 @@
goto err_free;
}
- ret = request_irq(ucb->irq, ucb1x00_irq, SA_TRIGGER_RISING,
+ ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
"UCB1x00", ucb);
if (ret) {
printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
diff --git a/drivers/misc/ibmasm/module.c b/drivers/misc/ibmasm/module.c
index 9706cc1..2f3bddf 100644
--- a/drivers/misc/ibmasm/module.c
+++ b/drivers/misc/ibmasm/module.c
@@ -113,7 +113,7 @@
goto error_ioremap;
}
- result = request_irq(sp->irq, ibmasm_interrupt_handler, SA_SHIRQ, sp->devname, (void*)sp);
+ result = request_irq(sp->irq, ibmasm_interrupt_handler, IRQF_SHARED, sp->devname, (void*)sp);
if (result) {
dev_err(sp->dev, "Failed to register interrupt handler\n");
goto error_request_irq;
diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c
index 075a2a0..6b7638b 100644
--- a/drivers/mmc/at91_mci.c
+++ b/drivers/mmc/at91_mci.c
@@ -850,7 +850,7 @@
/*
* Allocate the MCI interrupt
*/
- ret = request_irq(AT91_ID_MCI, at91_mci_irq, SA_SHIRQ, DRIVER_NAME, host);
+ ret = request_irq(AT91_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
if (ret) {
printk(KERN_ERR "Failed to request MCI interrupt\n");
clk_disable(mci_clk);
diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
index 4106990..fb60616 100644
--- a/drivers/mmc/au1xmmc.c
+++ b/drivers/mmc/au1xmmc.c
@@ -886,7 +886,7 @@
int i, ret = 0;
/* THe interrupt is shared among all controllers */
- ret = request_irq(AU1100_SD_IRQ, au1xmmc_irq, SA_INTERRUPT, "MMC", 0);
+ ret = request_irq(AU1100_SD_IRQ, au1xmmc_irq, IRQF_DISABLED, "MMC", 0);
if (ret) {
printk(DRIVER_NAME "ERROR: Couldn't get int %d: %d\n",
diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c
index 9dfb34a..1886562 100644
--- a/drivers/mmc/mmci.c
+++ b/drivers/mmc/mmci.c
@@ -531,11 +531,11 @@
writel(0, host->base + MMCIMASK1);
writel(0xfff, host->base + MMCICLEAR);
- ret = request_irq(dev->irq[0], mmci_irq, SA_SHIRQ, DRIVER_NAME " (cmd)", host);
+ ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host);
if (ret)
goto unmap;
- ret = request_irq(dev->irq[1], mmci_pio_irq, SA_SHIRQ, DRIVER_NAME " (pio)", host);
+ ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED, DRIVER_NAME " (pio)", host);
if (ret)
goto irq0_free;
diff --git a/drivers/mmc/omap.c b/drivers/mmc/omap.c
index 7a4840e..ddf06b3 100644
--- a/drivers/mmc/omap.c
+++ b/drivers/mmc/omap.c
@@ -60,6 +60,7 @@
unsigned char id; /* 16xx chips have 2 MMC blocks */
struct clk * iclk;
struct clk * fclk;
+ struct resource *res;
void __iomem *base;
int irq;
unsigned char bus_mode;
@@ -339,8 +340,6 @@
mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
{
int n;
- void __iomem *reg;
- u16 *p;
if (host->buffer_bytes_left == 0) {
host->sg_idx++;
@@ -657,12 +656,12 @@
struct mmc_data *mmcdat = host->data;
if (unlikely(host->dma_ch < 0)) {
- dev_err(mmc_dev(host->mmc), "DMA callback while DMA not
- enabled\n");
+ dev_err(mmc_dev(host->mmc),
+ "DMA callback while DMA not enabled\n");
return;
}
/* FIXME: We really should do something to _handle_ the errors */
- if (ch_status & OMAP_DMA_TOUT_IRQ) {
+ if (ch_status & OMAP1_DMA_TOUT_IRQ) {
dev_err(mmc_dev(host->mmc),"DMA timeout\n");
return;
}
@@ -972,20 +971,20 @@
struct omap_mmc_conf *minfo = pdev->dev.platform_data;
struct mmc_host *mmc;
struct mmc_omap_host *host = NULL;
+ struct resource *r;
int ret = 0;
+ int irq;
- if (platform_get_resource(pdev, IORESOURCE_MEM, 0) ||
- platform_get_irq(pdev, IORESOURCE_IRQ, 0)) {
- dev_err(&pdev->dev, "mmc_omap_probe: invalid resource type\n");
- return -ENODEV;
- }
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);
+ if (!r || irq < 0)
+ return -ENXIO;
- if (!request_mem_region(pdev->resource[0].start,
+ r = request_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start + 1,
- pdev->name)) {
- dev_dbg(&pdev->dev, "request_mem_region failed\n");
+ pdev->name);
+ if (!r)
return -EBUSY;
- }
mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev);
if (!mmc) {
@@ -1002,6 +1001,8 @@
host->dma_timer.data = (unsigned long) host;
host->id = pdev->id;
+ host->res = r;
+ host->irq = irq;
if (cpu_is_omap24xx()) {
host->iclk = clk_get(&pdev->dev, "mmc_ick");
@@ -1031,13 +1032,9 @@
host->dma_ch = -1;
host->irq = pdev->resource[1].start;
- host->base = ioremap(pdev->res.start, SZ_4K);
- if (!host->base) {
- ret = -ENOMEM;
- goto out;
- }
+ host->base = (void __iomem*)IO_ADDRESS(r->start);
- if (minfo->wire4)
+ if (minfo->wire4)
mmc->caps |= MMC_CAP_4_BIT_DATA;
mmc->ops = &mmc_omap_ops;
@@ -1056,8 +1053,8 @@
if (host->power_pin >= 0) {
if ((ret = omap_request_gpio(host->power_pin)) != 0) {
- dev_err(mmc_dev(host->mmc), "Unable to get GPIO
- pin for MMC power\n");
+ dev_err(mmc_dev(host->mmc),
+ "Unable to get GPIO pin for MMC power\n");
goto out;
}
omap_set_gpio_direction(host->power_pin, 0);
@@ -1085,7 +1082,7 @@
omap_set_gpio_direction(host->switch_pin, 1);
ret = request_irq(OMAP_GPIO_IRQ(host->switch_pin),
- mmc_omap_switch_irq, SA_TRIGGER_RISING, DRIVER_NAME, host);
+ mmc_omap_switch_irq, IRQF_TRIGGER_RISING, DRIVER_NAME, host);
if (ret) {
dev_warn(mmc_dev(host->mmc), "Unable to get IRQ for MMC cover switch\n");
omap_free_gpio(host->switch_pin);
@@ -1099,7 +1096,7 @@
device_remove_file(&pdev->dev, &dev_attr_cover_switch);
}
if (ret) {
- dev_wan(mmc_dev(host->mmc), "Unable to create sysfs attributes\n");
+ dev_warn(mmc_dev(host->mmc), "Unable to create sysfs attributes\n");
free_irq(OMAP_GPIO_IRQ(host->switch_pin), host);
omap_free_gpio(host->switch_pin);
host->switch_pin = -1;
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 8e9100b..74134699 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -8,12 +8,6 @@
* published by the Free Software Foundation.
*/
- /*
- * Note that PIO transfer is rather crappy atm. The buffer full/empty
- * interrupts aren't reliable so we currently transfer the entire buffer
- * directly. Patches to solve the problem are welcome.
- */
-
#include <linux/delay.h>
#include <linux/highmem.h>
#include <linux/pci.h>
@@ -27,13 +21,17 @@
#include "sdhci.h"
#define DRIVER_NAME "sdhci"
-#define DRIVER_VERSION "0.11"
+#define DRIVER_VERSION "0.12"
#define BUGMAIL "<sdhci-devel@list.drzeus.cx>"
#define DBG(f, x...) \
pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
+static unsigned int debug_nodma = 0;
+static unsigned int debug_forcedma = 0;
+static unsigned int debug_quirks = 0;
+
static const struct pci_device_id pci_ids[] __devinitdata = {
/* handle any SD host controller */
{PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)},
@@ -94,12 +92,27 @@
static void sdhci_reset(struct sdhci_host *host, u8 mask)
{
+ unsigned long timeout;
+
writeb(mask, host->ioaddr + SDHCI_SOFTWARE_RESET);
- if (mask & SDHCI_RESET_ALL) {
+ if (mask & SDHCI_RESET_ALL)
host->clock = 0;
- mdelay(50);
+ /* Wait max 100 ms */
+ timeout = 100;
+
+ /* hw clears the bit when it's done */
+ while (readb(host->ioaddr + SDHCI_SOFTWARE_RESET) & mask) {
+ if (timeout == 0) {
+ printk(KERN_ERR "%s: Reset 0x%x never completed. "
+ "Please report this to " BUGMAIL ".\n",
+ mmc_hostname(host->mmc), (int)mask);
+ sdhci_dumpregs(host);
+ return;
+ }
+ timeout--;
+ mdelay(1);
}
}
@@ -109,13 +122,15 @@
sdhci_reset(host, SDHCI_RESET_ALL);
- intmask = ~(SDHCI_INT_CARD_INT | SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
+ intmask = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
+ SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
+ SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
+ SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT |
+ SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL |
+ SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE;
writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
-
- /* This is unknown magic. */
- writeb(0xE, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
}
static void sdhci_activate_led(struct sdhci_host *host)
@@ -172,79 +187,46 @@
return host->num_sg;
}
-static void sdhci_transfer_pio(struct sdhci_host *host)
+static void sdhci_read_block_pio(struct sdhci_host *host)
{
+ int blksize, chunk_remain;
+ u32 data;
char *buffer;
- u32 mask;
- int bytes, size;
- unsigned long max_jiffies;
+ int size;
- BUG_ON(!host->data);
+ DBG("PIO reading\n");
- if (host->num_sg == 0)
- return;
-
- bytes = 0;
- if (host->data->flags & MMC_DATA_READ)
- mask = SDHCI_DATA_AVAILABLE;
- else
- mask = SDHCI_SPACE_AVAILABLE;
+ blksize = host->data->blksz;
+ chunk_remain = 0;
+ data = 0;
buffer = sdhci_kmap_sg(host) + host->offset;
- /* Transfer shouldn't take more than 5 s */
- max_jiffies = jiffies + HZ * 5;
-
- while (host->size > 0) {
- if (time_after(jiffies, max_jiffies)) {
- printk(KERN_ERR "%s: PIO transfer stalled. "
- "Please report this to "
- BUGMAIL ".\n", mmc_hostname(host->mmc));
- sdhci_dumpregs(host);
-
- sdhci_kunmap_sg(host);
-
- host->data->error = MMC_ERR_FAILED;
- sdhci_finish_data(host);
- return;
+ while (blksize) {
+ if (chunk_remain == 0) {
+ data = readl(host->ioaddr + SDHCI_BUFFER);
+ chunk_remain = min(blksize, 4);
}
- if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask))
- continue;
-
size = min(host->size, host->remain);
+ size = min(size, chunk_remain);
- if (size >= 4) {
- if (host->data->flags & MMC_DATA_READ)
- *(u32*)buffer = readl(host->ioaddr + SDHCI_BUFFER);
- else
- writel(*(u32*)buffer, host->ioaddr + SDHCI_BUFFER);
- size = 4;
- } else if (size >= 2) {
- if (host->data->flags & MMC_DATA_READ)
- *(u16*)buffer = readw(host->ioaddr + SDHCI_BUFFER);
- else
- writew(*(u16*)buffer, host->ioaddr + SDHCI_BUFFER);
- size = 2;
- } else {
- if (host->data->flags & MMC_DATA_READ)
- *(u8*)buffer = readb(host->ioaddr + SDHCI_BUFFER);
- else
- writeb(*(u8*)buffer, host->ioaddr + SDHCI_BUFFER);
- size = 1;
- }
-
- buffer += size;
+ chunk_remain -= size;
+ blksize -= size;
host->offset += size;
host->remain -= size;
-
- bytes += size;
host->size -= size;
+ while (size) {
+ *buffer = data & 0xFF;
+ buffer++;
+ data >>= 8;
+ size--;
+ }
if (host->remain == 0) {
sdhci_kunmap_sg(host);
if (sdhci_next_sg(host) == 0) {
- DBG("PIO transfer: %d bytes\n", bytes);
+ BUG_ON(blksize != 0);
return;
}
buffer = sdhci_kmap_sg(host);
@@ -252,38 +234,137 @@
}
sdhci_kunmap_sg(host);
+}
- DBG("PIO transfer: %d bytes\n", bytes);
+static void sdhci_write_block_pio(struct sdhci_host *host)
+{
+ int blksize, chunk_remain;
+ u32 data;
+ char *buffer;
+ int bytes, size;
+
+ DBG("PIO writing\n");
+
+ blksize = host->data->blksz;
+ chunk_remain = 4;
+ data = 0;
+
+ bytes = 0;
+ buffer = sdhci_kmap_sg(host) + host->offset;
+
+ while (blksize) {
+ size = min(host->size, host->remain);
+ size = min(size, chunk_remain);
+
+ chunk_remain -= size;
+ blksize -= size;
+ host->offset += size;
+ host->remain -= size;
+ host->size -= size;
+ while (size) {
+ data >>= 8;
+ data |= (u32)*buffer << 24;
+ buffer++;
+ size--;
+ }
+
+ if (chunk_remain == 0) {
+ writel(data, host->ioaddr + SDHCI_BUFFER);
+ chunk_remain = min(blksize, 4);
+ }
+
+ if (host->remain == 0) {
+ sdhci_kunmap_sg(host);
+ if (sdhci_next_sg(host) == 0) {
+ BUG_ON(blksize != 0);
+ return;
+ }
+ buffer = sdhci_kmap_sg(host);
+ }
+ }
+
+ sdhci_kunmap_sg(host);
+}
+
+static void sdhci_transfer_pio(struct sdhci_host *host)
+{
+ u32 mask;
+
+ BUG_ON(!host->data);
+
+ if (host->size == 0)
+ return;
+
+ if (host->data->flags & MMC_DATA_READ)
+ mask = SDHCI_DATA_AVAILABLE;
+ else
+ mask = SDHCI_SPACE_AVAILABLE;
+
+ while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
+ if (host->data->flags & MMC_DATA_READ)
+ sdhci_read_block_pio(host);
+ else
+ sdhci_write_block_pio(host);
+
+ if (host->size == 0)
+ break;
+
+ BUG_ON(host->num_sg == 0);
+ }
+
+ DBG("PIO transfer complete.\n");
}
static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
{
- u16 mode;
+ u8 count;
+ unsigned target_timeout, current_timeout;
WARN_ON(host->data);
- if (data == NULL) {
- writew(0, host->ioaddr + SDHCI_TRANSFER_MODE);
+ if (data == NULL)
return;
- }
DBG("blksz %04x blks %04x flags %08x\n",
data->blksz, data->blocks, data->flags);
DBG("tsac %d ms nsac %d clk\n",
data->timeout_ns / 1000000, data->timeout_clks);
- mode = SDHCI_TRNS_BLK_CNT_EN;
- if (data->blocks > 1)
- mode |= SDHCI_TRNS_MULTI;
- if (data->flags & MMC_DATA_READ)
- mode |= SDHCI_TRNS_READ;
- if (host->flags & SDHCI_USE_DMA)
- mode |= SDHCI_TRNS_DMA;
+ /* Sanity checks */
+ BUG_ON(data->blksz * data->blocks > 524288);
+ BUG_ON(data->blksz > host->max_block);
+ BUG_ON(data->blocks > 65535);
- writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE);
+ /* timeout in us */
+ target_timeout = data->timeout_ns / 1000 +
+ data->timeout_clks / host->clock;
- writew(data->blksz, host->ioaddr + SDHCI_BLOCK_SIZE);
- writew(data->blocks, host->ioaddr + SDHCI_BLOCK_COUNT);
+ /*
+ * Figure out needed cycles.
+ * We do this in steps in order to fit inside a 32 bit int.
+ * The first step is the minimum timeout, which will have a
+ * minimum resolution of 6 bits:
+ * (1) 2^13*1000 > 2^22,
+ * (2) host->timeout_clk < 2^16
+ * =>
+ * (1) / (2) > 2^6
+ */
+ count = 0;
+ current_timeout = (1 << 13) * 1000 / host->timeout_clk;
+ while (current_timeout < target_timeout) {
+ count++;
+ current_timeout <<= 1;
+ if (count >= 0xF)
+ break;
+ }
+
+ if (count >= 0xF) {
+ printk(KERN_WARNING "%s: Too large timeout requested!\n",
+ mmc_hostname(host->mmc));
+ count = 0xE;
+ }
+
+ writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
if (host->flags & SDHCI_USE_DMA) {
int count;
@@ -302,12 +383,37 @@
host->offset = 0;
host->remain = host->cur_sg->length;
}
+
+ /* We do not handle DMA boundaries, so set it to max (512 KiB) */
+ writew(SDHCI_MAKE_BLKSZ(7, data->blksz),
+ host->ioaddr + SDHCI_BLOCK_SIZE);
+ writew(data->blocks, host->ioaddr + SDHCI_BLOCK_COUNT);
+}
+
+static void sdhci_set_transfer_mode(struct sdhci_host *host,
+ struct mmc_data *data)
+{
+ u16 mode;
+
+ WARN_ON(host->data);
+
+ if (data == NULL)
+ return;
+
+ mode = SDHCI_TRNS_BLK_CNT_EN;
+ if (data->blocks > 1)
+ mode |= SDHCI_TRNS_MULTI;
+ if (data->flags & MMC_DATA_READ)
+ mode |= SDHCI_TRNS_READ;
+ if (host->flags & SDHCI_USE_DMA)
+ mode |= SDHCI_TRNS_DMA;
+
+ writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE);
}
static void sdhci_finish_data(struct sdhci_host *host)
{
struct mmc_data *data;
- u32 intmask;
u16 blocks;
BUG_ON(!host->data);
@@ -318,14 +424,6 @@
if (host->flags & SDHCI_USE_DMA) {
pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len,
(data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE);
- } else {
- intmask = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
- intmask &= ~(SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
- writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
-
- intmask = readl(host->ioaddr + SDHCI_INT_ENABLE);
- intmask &= ~(SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
- writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
}
/*
@@ -371,27 +469,38 @@
static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
{
int flags;
- u32 present;
- unsigned long max_jiffies;
+ u32 mask;
+ unsigned long timeout;
WARN_ON(host->cmd);
DBG("Sending cmd (%x)\n", cmd->opcode);
/* Wait max 10 ms */
- max_jiffies = jiffies + (HZ + 99)/100;
- do {
- if (time_after(jiffies, max_jiffies)) {
+ timeout = 10;
+
+ mask = SDHCI_CMD_INHIBIT;
+ if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
+ mask |= SDHCI_DATA_INHIBIT;
+
+ /* We shouldn't wait for data inihibit for stop commands, even
+ though they might use busy signaling */
+ if (host->mrq->data && (cmd == host->mrq->data->stop))
+ mask &= ~SDHCI_DATA_INHIBIT;
+
+ while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
+ if (timeout == 0) {
printk(KERN_ERR "%s: Controller never released "
- "inhibit bits. Please report this to "
+ "inhibit bit(s). Please report this to "
BUGMAIL ".\n", mmc_hostname(host->mmc));
sdhci_dumpregs(host);
cmd->error = MMC_ERR_FAILED;
tasklet_schedule(&host->finish_tasklet);
return;
}
- present = readl(host->ioaddr + SDHCI_PRESENT_STATE);
- } while (present & (SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT));
+ timeout--;
+ mdelay(1);
+ }
mod_timer(&host->timer, jiffies + 10 * HZ);
@@ -401,6 +510,8 @@
writel(cmd->arg, host->ioaddr + SDHCI_ARGUMENT);
+ sdhci_set_transfer_mode(host, cmd->data);
+
if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
printk(KERN_ERR "%s: Unsupported response type! "
"Please report this to " BUGMAIL ".\n",
@@ -456,31 +567,9 @@
DBG("Ending cmd (%x)\n", host->cmd->opcode);
- if (host->cmd->data) {
- u32 intmask;
-
+ if (host->cmd->data)
host->data = host->cmd->data;
-
- if (!(host->flags & SDHCI_USE_DMA)) {
- /*
- * Don't enable the interrupts until now to make sure we
- * get stable handling of the FIFO.
- */
- intmask = readl(host->ioaddr + SDHCI_INT_ENABLE);
- intmask |= SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL;
- writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
-
- intmask = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
- intmask |= SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL;
- writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
-
- /*
- * The buffer interrupts are to unreliable so we
- * start the transfer immediatly.
- */
- sdhci_transfer_pio(host);
- }
- } else
+ else
tasklet_schedule(&host->finish_tasklet);
host->cmd = NULL;
@@ -490,7 +579,7 @@
{
int div;
u16 clk;
- unsigned long max_jiffies;
+ unsigned long timeout;
if (clock == host->clock)
return;
@@ -511,17 +600,19 @@
writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL);
/* Wait max 10 ms */
- max_jiffies = jiffies + (HZ + 99)/100;
- do {
- if (time_after(jiffies, max_jiffies)) {
+ timeout = 10;
+ while (!((clk = readw(host->ioaddr + SDHCI_CLOCK_CONTROL))
+ & SDHCI_CLOCK_INT_STABLE)) {
+ if (timeout == 0) {
printk(KERN_ERR "%s: Internal clock never stabilised. "
"Please report this to " BUGMAIL ".\n",
mmc_hostname(host->mmc));
sdhci_dumpregs(host);
return;
}
- clk = readw(host->ioaddr + SDHCI_CLOCK_CONTROL);
- } while (!(clk & SDHCI_CLOCK_INT_STABLE));
+ timeout--;
+ mdelay(1);
+ }
clk |= SDHCI_CLOCK_CARD_EN;
writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL);
@@ -530,6 +621,46 @@
host->clock = clock;
}
+static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
+{
+ u8 pwr;
+
+ if (host->power == power)
+ return;
+
+ writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
+
+ if (power == (unsigned short)-1)
+ goto out;
+
+ pwr = SDHCI_POWER_ON;
+
+ switch (power) {
+ case MMC_VDD_170:
+ case MMC_VDD_180:
+ case MMC_VDD_190:
+ pwr |= SDHCI_POWER_180;
+ break;
+ case MMC_VDD_290:
+ case MMC_VDD_300:
+ case MMC_VDD_310:
+ pwr |= SDHCI_POWER_300;
+ break;
+ case MMC_VDD_320:
+ case MMC_VDD_330:
+ case MMC_VDD_340:
+ pwr |= SDHCI_POWER_330;
+ break;
+ default:
+ BUG();
+ }
+
+ writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
+
+out:
+ host->power = power;
+}
+
/*****************************************************************************\
* *
* MMC callbacks *
@@ -576,17 +707,15 @@
*/
if (ios->power_mode == MMC_POWER_OFF) {
writel(0, host->ioaddr + SDHCI_SIGNAL_ENABLE);
- spin_unlock_irqrestore(&host->lock, flags);
sdhci_init(host);
- spin_lock_irqsave(&host->lock, flags);
}
sdhci_set_clock(host, ios->clock);
if (ios->power_mode == MMC_POWER_OFF)
- writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
+ sdhci_set_power(host, -1);
else
- writeb(0xFF, host->ioaddr + SDHCI_POWER_CONTROL);
+ sdhci_set_power(host, ios->vdd);
ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
if (ios->bus_width == MMC_BUS_WIDTH_4)
@@ -793,7 +922,7 @@
if (host->data->error != MMC_ERR_NONE)
sdhci_finish_data(host);
else {
- if (intmask & (SDHCI_INT_BUF_FULL | SDHCI_INT_BUF_EMPTY))
+ if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
sdhci_transfer_pio(host);
if (intmask & SDHCI_INT_DATA_END)
@@ -818,50 +947,44 @@
DBG("*** %s got interrupt: 0x%08x\n", host->slot_descr, intmask);
- if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE))
+ if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
+ writel(intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE),
+ host->ioaddr + SDHCI_INT_STATUS);
tasklet_schedule(&host->card_tasklet);
+ }
+
+ intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
if (intmask & SDHCI_INT_CMD_MASK) {
- sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
-
writel(intmask & SDHCI_INT_CMD_MASK,
host->ioaddr + SDHCI_INT_STATUS);
+ sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
}
if (intmask & SDHCI_INT_DATA_MASK) {
- sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
-
writel(intmask & SDHCI_INT_DATA_MASK,
host->ioaddr + SDHCI_INT_STATUS);
+ sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
}
intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
- if (intmask & SDHCI_INT_CARD_INT) {
- printk(KERN_ERR "%s: Unexpected card interrupt. Please "
- "report this to " BUGMAIL ".\n",
- mmc_hostname(host->mmc));
- sdhci_dumpregs(host);
- }
-
if (intmask & SDHCI_INT_BUS_POWER) {
- printk(KERN_ERR "%s: Unexpected bus power interrupt. Please "
- "report this to " BUGMAIL ".\n",
+ printk(KERN_ERR "%s: Card is consuming too much power!\n",
mmc_hostname(host->mmc));
- sdhci_dumpregs(host);
+ writel(SDHCI_INT_BUS_POWER, host->ioaddr + SDHCI_INT_STATUS);
}
- if (intmask & SDHCI_INT_ACMD12ERR) {
- printk(KERN_ERR "%s: Unexpected auto CMD12 error. Please "
+ intmask &= SDHCI_INT_BUS_POWER;
+
+ if (intmask) {
+ printk(KERN_ERR "%s: Unexpected interrupt 0x%08x. Please "
"report this to " BUGMAIL ".\n",
- mmc_hostname(host->mmc));
+ mmc_hostname(host->mmc), intmask);
sdhci_dumpregs(host);
- writew(~0, host->ioaddr + SDHCI_ACMD12_ERR);
- }
-
- if (intmask)
writel(intmask, host->ioaddr + SDHCI_INT_STATUS);
+ }
result = IRQ_HANDLED;
@@ -954,6 +1077,7 @@
static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
{
int ret;
+ unsigned int version;
struct sdhci_chip *chip;
struct mmc_host *mmc;
struct sdhci_host *host;
@@ -985,6 +1109,16 @@
return -ENODEV;
}
+ if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
+ printk(KERN_ERR DRIVER_NAME ": Vendor specific interface. Aborting.\n");
+ return -ENODEV;
+ }
+
+ if ((pdev->class & 0x0000FF) > PCI_SDHCI_IFVENDOR) {
+ printk(KERN_ERR DRIVER_NAME ": Unknown interface. Aborting.\n");
+ return -ENODEV;
+ }
+
mmc = mmc_alloc_host(sizeof(struct sdhci_host), &pdev->dev);
if (!mmc)
return -ENOMEM;
@@ -1012,9 +1146,30 @@
goto release;
}
+ sdhci_reset(host, SDHCI_RESET_ALL);
+
+ version = readw(host->ioaddr + SDHCI_HOST_VERSION);
+ version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT;
+ if (version != 0) {
+ printk(KERN_ERR "%s: Unknown controller version (%d). "
+ "Cowardly refusing to continue.\n", host->slot_descr,
+ version);
+ ret = -ENODEV;
+ goto unmap;
+ }
+
caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
- if ((caps & SDHCI_CAN_DO_DMA) && ((pdev->class & 0x0000FF) == 0x01))
+ if (debug_nodma)
+ DBG("DMA forced off\n");
+ else if (debug_forcedma) {
+ DBG("DMA forced on\n");
+ host->flags |= SDHCI_USE_DMA;
+ } else if ((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA)
+ DBG("Controller doesn't have DMA interface\n");
+ else if (!(caps & SDHCI_CAN_DO_DMA))
+ DBG("Controller doesn't have DMA capability\n");
+ else
host->flags |= SDHCI_USE_DMA;
if (host->flags & SDHCI_USE_DMA) {
@@ -1030,18 +1185,59 @@
else /* XXX: Hack to get MMC layer to avoid highmem */
pdev->dma_mask = 0;
- host->max_clk = (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
+ host->max_clk =
+ (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
+ if (host->max_clk == 0) {
+ printk(KERN_ERR "%s: Hardware doesn't specify base clock "
+ "frequency.\n", host->slot_descr);
+ ret = -ENODEV;
+ goto unmap;
+ }
host->max_clk *= 1000000;
+ host->timeout_clk =
+ (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
+ if (host->timeout_clk == 0) {
+ printk(KERN_ERR "%s: Hardware doesn't specify timeout clock "
+ "frequency.\n", host->slot_descr);
+ ret = -ENODEV;
+ goto unmap;
+ }
+ if (caps & SDHCI_TIMEOUT_CLK_UNIT)
+ host->timeout_clk *= 1000;
+
+ host->max_block = (caps & SDHCI_MAX_BLOCK_MASK) >> SDHCI_MAX_BLOCK_SHIFT;
+ if (host->max_block >= 3) {
+ printk(KERN_ERR "%s: Invalid maximum block size.\n",
+ host->slot_descr);
+ ret = -ENODEV;
+ goto unmap;
+ }
+ host->max_block = 512 << host->max_block;
+
/*
* Set host parameters.
*/
mmc->ops = &sdhci_ops;
mmc->f_min = host->max_clk / 256;
mmc->f_max = host->max_clk;
- mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->ocr_avail = 0;
+ if (caps & SDHCI_CAN_VDD_330)
+ mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34;
+ else if (caps & SDHCI_CAN_VDD_300)
+ mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31;
+ else if (caps & SDHCI_CAN_VDD_180)
+ mmc->ocr_avail |= MMC_VDD_17_18|MMC_VDD_18_19;
+
+ if (mmc->ocr_avail == 0) {
+ printk(KERN_ERR "%s: Hardware doesn't report any "
+ "support voltages.\n", host->slot_descr);
+ ret = -ENODEV;
+ goto unmap;
+ }
+
spin_lock_init(&host->lock);
/*
@@ -1054,10 +1250,10 @@
mmc->max_phys_segs = 16;
/*
- * Maximum number of sectors in one transfer. Limited by sector
- * count register.
+ * Maximum number of sectors in one transfer. Limited by DMA boundary
+ * size (512KiB), which means (512 KiB/512=) 1024 entries.
*/
- mmc->max_sectors = 0x3FFF;
+ mmc->max_sectors = 1024;
/*
* Maximum segment size. Could be one segment with the maximum number
@@ -1075,10 +1271,10 @@
setup_timer(&host->timer, sdhci_timeout_timer, (long)host);
- ret = request_irq(host->irq, sdhci_irq, SA_SHIRQ,
+ ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
host->slot_descr, host);
if (ret)
- goto unmap;
+ goto untasklet;
sdhci_init(host);
@@ -1097,10 +1293,10 @@
return 0;
-unmap:
+untasklet:
tasklet_kill(&host->card_tasklet);
tasklet_kill(&host->finish_tasklet);
-
+unmap:
iounmap(host->ioaddr);
release:
pci_release_region(pdev, host->bar);
@@ -1144,13 +1340,18 @@
const struct pci_device_id *ent)
{
int ret, i;
- u8 slots;
+ u8 slots, rev;
struct sdhci_chip *chip;
BUG_ON(pdev == NULL);
BUG_ON(ent == NULL);
- DBG("found at %s\n", pci_name(pdev));
+ pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev);
+
+ printk(KERN_INFO DRIVER_NAME
+ ": SDHCI controller found at %s [%04x:%04x] (rev %x)\n",
+ pci_name(pdev), (int)pdev->vendor, (int)pdev->device,
+ (int)rev);
ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots);
if (ret)
@@ -1173,6 +1374,10 @@
}
chip->pdev = pdev;
+ chip->quirks = ent->driver_data;
+
+ if (debug_quirks)
+ chip->quirks = debug_quirks;
chip->num_slots = slots;
pci_set_drvdata(pdev, chip);
@@ -1251,7 +1456,15 @@
module_init(sdhci_drv_init);
module_exit(sdhci_drv_exit);
+module_param(debug_nodma, uint, 0444);
+module_param(debug_forcedma, uint, 0444);
+module_param(debug_quirks, uint, 0444);
+
MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
MODULE_DESCRIPTION("Secure Digital Host Controller Interface driver");
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
+
+MODULE_PARM_DESC(debug_nodma, "Forcefully disable DMA transfers. (default 0)");
+MODULE_PARM_DESC(debug_forcedma, "Forcefully enable DMA transfers. (default 0)");
+MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
diff --git a/drivers/mmc/sdhci.h b/drivers/mmc/sdhci.h
index 3b270ef..f245334 100644
--- a/drivers/mmc/sdhci.h
+++ b/drivers/mmc/sdhci.h
@@ -12,6 +12,10 @@
* PCI registers
*/
+#define PCI_SDHCI_IFPIO 0x00
+#define PCI_SDHCI_IFDMA 0x01
+#define PCI_SDHCI_IFVENDOR 0x02
+
#define PCI_SLOT_INFO 0x40 /* 8 bits */
#define PCI_SLOT_INFO_SLOTS(x) ((x >> 4) & 7)
#define PCI_SLOT_INFO_FIRST_BAR_MASK 0x07
@@ -23,6 +27,7 @@
#define SDHCI_DMA_ADDRESS 0x00
#define SDHCI_BLOCK_SIZE 0x04
+#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
#define SDHCI_BLOCK_COUNT 0x06
@@ -67,6 +72,10 @@
#define SDHCI_CTRL_4BITBUS 0x02
#define SDHCI_POWER_CONTROL 0x29
+#define SDHCI_POWER_ON 0x01
+#define SDHCI_POWER_180 0x0A
+#define SDHCI_POWER_300 0x0C
+#define SDHCI_POWER_330 0x0E
#define SDHCI_BLOCK_GAP_CONTROL 0x2A
@@ -91,8 +100,8 @@
#define SDHCI_INT_RESPONSE 0x00000001
#define SDHCI_INT_DATA_END 0x00000002
#define SDHCI_INT_DMA_END 0x00000008
-#define SDHCI_INT_BUF_EMPTY 0x00000010
-#define SDHCI_INT_BUF_FULL 0x00000020
+#define SDHCI_INT_SPACE_AVAIL 0x00000010
+#define SDHCI_INT_DATA_AVAIL 0x00000020
#define SDHCI_INT_CARD_INSERT 0x00000040
#define SDHCI_INT_CARD_REMOVE 0x00000080
#define SDHCI_INT_CARD_INT 0x00000100
@@ -112,7 +121,7 @@
#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
- SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL | \
+ SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
SDHCI_INT_DATA_END_BIT)
@@ -121,9 +130,17 @@
/* 3E-3F reserved */
#define SDHCI_CAPABILITIES 0x40
-#define SDHCI_CAN_DO_DMA 0x00400000
+#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
+#define SDHCI_TIMEOUT_CLK_SHIFT 0
+#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
#define SDHCI_CLOCK_BASE_MASK 0x00003F00
#define SDHCI_CLOCK_BASE_SHIFT 8
+#define SDHCI_MAX_BLOCK_MASK 0x00030000
+#define SDHCI_MAX_BLOCK_SHIFT 16
+#define SDHCI_CAN_DO_DMA 0x00400000
+#define SDHCI_CAN_VDD_330 0x01000000
+#define SDHCI_CAN_VDD_300 0x02000000
+#define SDHCI_CAN_VDD_180 0x04000000
/* 44-47 reserved for more caps */
@@ -136,6 +153,10 @@
#define SDHCI_SLOT_INT_STATUS 0xFC
#define SDHCI_HOST_VERSION 0xFE
+#define SDHCI_VENDOR_VER_MASK 0xFF00
+#define SDHCI_VENDOR_VER_SHIFT 8
+#define SDHCI_SPEC_VER_MASK 0x00FF
+#define SDHCI_SPEC_VER_SHIFT 0
struct sdhci_chip;
@@ -149,8 +170,11 @@
#define SDHCI_USE_DMA (1<<0)
unsigned int max_clk; /* Max possible freq (MHz) */
+ unsigned int timeout_clk; /* Timeout freq (KHz) */
+ unsigned int max_block; /* Max block size (bytes) */
unsigned int clock; /* Current clock (MHz) */
+ unsigned short power; /* Current voltage */
struct mmc_request *mrq; /* Current request */
struct mmc_command *cmd; /* Current command */
@@ -180,6 +204,8 @@
struct sdhci_chip {
struct pci_dev *pdev;
+ unsigned long quirks;
+
int num_slots; /* Slots on controller */
struct sdhci_host *hosts[0]; /* Pointers to hosts */
};
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 3fcd86c..8a30ef3 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -1553,7 +1553,7 @@
* Allocate interrupt.
*/
- ret = request_irq(irq, wbsd_irq, SA_SHIRQ, DRIVER_NAME, host);
+ ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host);
if (ret)
return ret;
diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c
index ac60f3f..4532b17 100644
--- a/drivers/net/3c515.c
+++ b/drivers/net/3c515.c
@@ -760,7 +760,7 @@
vp->product_name, dev)) return -EAGAIN;
enable_dma(dev->dma);
set_dma_mode(dev->dma, DMA_MODE_CASCADE);
- } else if (request_irq(dev->irq, &corkscrew_interrupt, SA_SHIRQ,
+ } else if (request_irq(dev->irq, &corkscrew_interrupt, IRQF_SHARED,
vp->product_name, dev)) {
return -EAGAIN;
}
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
index 4bf8510..5dfd97f 100644
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -289,7 +289,7 @@
elmc_id_attn586(); /* disable interrupts */
- ret = request_irq(dev->irq, &elmc_interrupt, SA_SHIRQ | SA_SAMPLE_RANDOM,
+ ret = request_irq(dev->irq, &elmc_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM,
dev->name, dev);
if (ret) {
printk(KERN_ERR "%s: couldn't get irq %d\n", dev->name, dev->irq);
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index 157eda5..03c0f71 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -435,7 +435,7 @@
* Grab the IRQ
*/
- err = request_irq(dev->irq, &mc32_interrupt, SA_SHIRQ | SA_SAMPLE_RANDOM, DRV_NAME, dev);
+ err = request_irq(dev->irq, &mc32_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM, DRV_NAME, dev);
if (err) {
release_region(dev->base_addr, MC32_IO_EXTENT);
printk(KERN_ERR "%s: unable to get IRQ %d.\n", DRV_NAME, dev->irq);
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 45125db..8ab03b4 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -996,7 +996,7 @@
pci_enable_device(pdev);
pci_set_master(pdev);
if (request_irq(dev->irq, vp->full_bus_master_rx ?
- &boomerang_interrupt : &vortex_interrupt, SA_SHIRQ, dev->name, dev)) {
+ &boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev)) {
printk(KERN_WARNING "%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
pci_disable_device(pdev);
return -EBUSY;
@@ -1833,7 +1833,7 @@
/* Use the now-standard shared IRQ implementation. */
if ((retval = request_irq(dev->irq, vp->full_bus_master_rx ?
- &boomerang_interrupt : &vortex_interrupt, SA_SHIRQ, dev->name, dev))) {
+ &boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev))) {
printk(KERN_ERR "%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
goto out;
}
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 1d7af76..1959654 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -1203,7 +1203,7 @@
cp_init_hw(cp);
- rc = request_irq(dev->irq, cp_interrupt, SA_SHIRQ, dev->name, dev);
+ rc = request_irq(dev->irq, cp_interrupt, IRQF_SHARED, dev->name, dev);
if (rc)
goto err_out_hw;
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index d21e98f..717506b 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -1310,7 +1310,7 @@
int retval;
void __iomem *ioaddr = tp->mmio_addr;
- retval = request_irq (dev->irq, rtl8139_interrupt, SA_SHIRQ, dev->name, dev);
+ retval = request_irq (dev->irq, rtl8139_interrupt, IRQF_SHARED, dev->name, dev);
if (retval)
return retval;
diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c
index 519390c..f4ea626 100644
--- a/drivers/net/a2065.c
+++ b/drivers/net/a2065.c
@@ -495,7 +495,7 @@
ll->rdp = LE_C0_STOP;
/* Install the Interrupt handler */
- ret = request_irq(IRQ_AMIGA_PORTS, lance_interrupt, SA_SHIRQ,
+ ret = request_irq(IRQ_AMIGA_PORTS, lance_interrupt, IRQF_SHARED,
dev->name, dev);
if (ret) return ret;
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index c290b5a..1c01e9b 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -1194,7 +1194,7 @@
goto init_error;
}
- ecode = request_irq(pdev->irq, ace_interrupt, SA_SHIRQ,
+ ecode = request_irq(pdev->irq, ace_interrupt, IRQF_SHARED,
DRV_NAME, dev);
if (ecode) {
printk(KERN_WARNING "%s: Requested IRQ %d is busy\n",
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index c017c4f..ed322a7 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1376,7 +1376,7 @@
{
struct amd8111e_priv *lp = netdev_priv(dev);
- if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, SA_SHIRQ,
+ if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED,
dev->name, dev))
return -EAGAIN;
diff --git a/drivers/net/apne.c b/drivers/net/apne.c
index b9820b8..9cc13a0 100644
--- a/drivers/net/apne.c
+++ b/drivers/net/apne.c
@@ -313,7 +313,7 @@
dev->base_addr = ioaddr;
/* Install the Interrupt handler */
- i = request_irq(IRQ_AMIGA_PORTS, apne_interrupt, SA_SHIRQ, DRV_NAME, dev);
+ i = request_irq(IRQ_AMIGA_PORTS, apne_interrupt, IRQF_SHARED, DRV_NAME, dev);
if (i) return i;
for(i = 0; i < ETHER_ADDR_LEN; i++) {
diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c
index 96636ca..979a33d 100644
--- a/drivers/net/arcnet/com20020-pci.c
+++ b/drivers/net/arcnet/com20020-pci.c
@@ -120,7 +120,7 @@
goto out_port;
}
- if ((err = com20020_found(dev, SA_SHIRQ)) != 0)
+ if ((err = com20020_found(dev, IRQF_SHARED)) != 0)
goto out_port;
return 0;
diff --git a/drivers/net/ariadne.c b/drivers/net/ariadne.c
index a9bb7a4..cc721ad 100644
--- a/drivers/net/ariadne.c
+++ b/drivers/net/ariadne.c
@@ -320,7 +320,7 @@
netif_start_queue(dev);
- i = request_irq(IRQ_AMIGA_PORTS, ariadne_interrupt, SA_SHIRQ,
+ i = request_irq(IRQ_AMIGA_PORTS, ariadne_interrupt, IRQF_SHARED,
dev->name, dev);
if (i) return i;
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index a7e4ba5..cd98d31 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -1421,7 +1421,7 @@
b44_check_phy(bp);
- err = request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev);
+ err = request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev);
if (unlikely(err < 0)) {
b44_chip_reset(bp);
b44_free_rings(bp);
@@ -2322,7 +2322,7 @@
if (!netif_running(dev))
return 0;
- if (request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev))
+ if (request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev))
printk(KERN_ERR PFX "%s: request_irq failed\n", dev->name);
spin_lock_irq(&bp->lock);
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 7e32d4e..4f4db5a 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -4260,11 +4260,11 @@
}
else {
rc = request_irq(bp->pdev->irq, bnx2_interrupt,
- SA_SHIRQ, dev->name, dev);
+ IRQF_SHARED, dev->name, dev);
}
}
else {
- rc = request_irq(bp->pdev->irq, bnx2_interrupt, SA_SHIRQ,
+ rc = request_irq(bp->pdev->irq, bnx2_interrupt, IRQF_SHARED,
dev->name, dev);
}
if (rc) {
@@ -4311,7 +4311,7 @@
if (!rc) {
rc = request_irq(bp->pdev->irq, bnx2_interrupt,
- SA_SHIRQ, dev->name, dev);
+ IRQF_SHARED, dev->name, dev);
}
if (rc) {
bnx2_free_skbs(bp);
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index b89c7bb..d33130f 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -4349,7 +4349,7 @@
* mapping to expose them
*/
if (request_irq(cp->pdev->irq, cas_interrupt,
- SA_SHIRQ, dev->name, (void *) dev)) {
+ IRQF_SHARED, dev->name, (void *) dev)) {
printk(KERN_ERR "%s: failed to request irq !\n",
cp->dev->name);
err = -EAGAIN;
diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c
index c490a86..e678724 100644
--- a/drivers/net/chelsio/cxgb2.c
+++ b/drivers/net/chelsio/cxgb2.c
@@ -218,7 +218,7 @@
t1_interrupts_clear(adapter);
if ((err = request_irq(adapter->pdev->irq,
- t1_select_intr_handler(adapter), SA_SHIRQ,
+ t1_select_intr_handler(adapter), IRQF_SHARED,
adapter->name, adapter))) {
goto out_err;
}
diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c
index d3654fd..0eb1f87 100644
--- a/drivers/net/cris/eth_v10.c
+++ b/drivers/net/cris/eth_v10.c
@@ -671,7 +671,7 @@
/* allocate the irq corresponding to the receiving DMA */
if (request_irq(NETWORK_DMA_RX_IRQ_NBR, e100rxtx_interrupt,
- SA_SAMPLE_RANDOM, cardname, (void *)dev)) {
+ IRQF_SAMPLE_RANDOM, cardname, (void *)dev)) {
goto grace_exit0;
}
diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c
index 5acd35c..91cc8cb 100644
--- a/drivers/net/defxx.c
+++ b/drivers/net/defxx.c
@@ -1228,7 +1228,7 @@
/* Register IRQ - support shared interrupts by passing device ptr */
- ret = request_irq(dev->irq, dfx_interrupt, SA_SHIRQ, dev->name, dev);
+ ret = request_irq(dev->irq, dfx_interrupt, IRQF_SHARED, dev->name, dev);
if (ret) {
printk(KERN_ERR "%s: Requested IRQ %d is busy\n", dev->name, dev->irq);
return ret;
diff --git a/drivers/net/dgrs.c b/drivers/net/dgrs.c
index e175d48..fa4f094 100644
--- a/drivers/net/dgrs.c
+++ b/drivers/net/dgrs.c
@@ -1191,7 +1191,7 @@
if (priv->plxreg)
OUTL(dev->base_addr + PLX_LCL2PCI_DOORBELL, 1);
- rc = request_irq(dev->irq, &dgrs_intr, SA_SHIRQ, "RightSwitch", dev);
+ rc = request_irq(dev->irq, &dgrs_intr, IRQF_SHARED, "RightSwitch", dev);
if (rc)
goto err_out;
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 2977805..4b6ddb7 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -440,7 +440,7 @@
int i;
u16 macctrl;
- i = request_irq (dev->irq, &rio_interrupt, SA_SHIRQ, dev->name, dev);
+ i = request_irq (dev->irq, &rio_interrupt, IRQF_SHARED, dev->name, dev);
if (i)
return i;
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 7965a9b..1b758b7 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -603,7 +603,7 @@
PRINTK2("entering dm9000_open\n");
- if (request_irq(dev->irq, &dm9000_interrupt, SA_SHIRQ, dev->name, dev))
+ if (request_irq(dev->irq, &dm9000_interrupt, IRQF_SHARED, dev->name, dev))
return -EAGAIN;
/* Initialize DM9000 board */
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index a1d676a..91ef5f2 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2063,7 +2063,7 @@
e100_set_multicast_list(nic->netdev);
e100_start_receiver(nic, NULL);
mod_timer(&nic->watchdog, jiffies);
- if((err = request_irq(nic->pdev->irq, e100_intr, SA_SHIRQ,
+ if((err = request_irq(nic->pdev->irq, e100_intr, IRQF_SHARED,
nic->netdev->name, nic->netdev)))
goto err_no_irq;
netif_wake_queue(nic->netdev);
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 6ed7f59..d196648 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -871,10 +871,10 @@
*data = 0;
/* Hook up test interrupt handler just for this test */
- if (!request_irq(irq, &e1000_test_intr, SA_PROBEIRQ, netdev->name,
- netdev)) {
+ if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED,
+ netdev->name, netdev)) {
shared_int = FALSE;
- } else if (request_irq(irq, &e1000_test_intr, SA_SHIRQ,
+ } else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
netdev->name, netdev)){
*data = 1;
return -1;
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 32b7d44..f77624f 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -426,7 +426,7 @@
}
#endif
if ((err = request_irq(adapter->pdev->irq, &e1000_intr,
- SA_SHIRQ | SA_SAMPLE_RANDOM,
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM,
netdev->name, netdev))) {
DPRINTK(PROBE, ERR,
"Unable to allocate interrupt Error: %d\n", err);
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index e70f172..20d3143 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -920,7 +920,7 @@
eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */
- if (request_irq (*irqp, NULL, SA_SHIRQ, "bogus", dev) != EBUSY) {
+ if (request_irq (*irqp, NULL, IRQF_SHARED, "bogus", dev) != EBUSY) {
unsigned long irq_mask;
/* Twinkle the interrupt, and check if it's seen */
irq_mask = probe_irq_on();
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index 1e2fbbb..2ad3275 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -977,7 +977,7 @@
sp->in_interrupt = 0;
/* .. we can safely take handler calls during init. */
- retval = request_irq(dev->irq, &speedo_interrupt, SA_SHIRQ, dev->name, dev);
+ retval = request_irq(dev->irq, &speedo_interrupt, IRQF_SHARED, dev->name, dev);
if (retval) {
return retval;
}
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index b160abe..9f3e09a 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -713,7 +713,7 @@
/* Soft reset the chip. */
outl(0x4001, ioaddr + GENCTL);
- if ((retval = request_irq(dev->irq, &epic_interrupt, SA_SHIRQ, dev->name, dev)))
+ if ((retval = request_irq(dev->irq, &epic_interrupt, IRQF_SHARED, dev->name, dev)))
return retval;
epic_init_ring(dev);
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index 13eca7e..c701951 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -834,7 +834,7 @@
iowrite32(0x00000001, ioaddr + BCR); /* Reset */
- if (request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev))
+ if (request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev))
return -EAGAIN;
for (i = 0; i < 3; i++)
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 21be4fa..3c90003 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -2622,21 +2622,21 @@
np->msi_flags |= NV_MSI_X_ENABLED;
if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT && !intr_test) {
/* Request irq for rx handling */
- if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, &nv_nic_irq_rx, SA_SHIRQ, dev->name, dev) != 0) {
+ if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, &nv_nic_irq_rx, IRQF_SHARED, dev->name, dev) != 0) {
printk(KERN_INFO "forcedeth: request_irq failed for rx %d\n", ret);
pci_disable_msix(np->pci_dev);
np->msi_flags &= ~NV_MSI_X_ENABLED;
goto out_err;
}
/* Request irq for tx handling */
- if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, &nv_nic_irq_tx, SA_SHIRQ, dev->name, dev) != 0) {
+ if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, &nv_nic_irq_tx, IRQF_SHARED, dev->name, dev) != 0) {
printk(KERN_INFO "forcedeth: request_irq failed for tx %d\n", ret);
pci_disable_msix(np->pci_dev);
np->msi_flags &= ~NV_MSI_X_ENABLED;
goto out_free_rx;
}
/* Request irq for link and timer handling */
- if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector, &nv_nic_irq_other, SA_SHIRQ, dev->name, dev) != 0) {
+ if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector, &nv_nic_irq_other, IRQF_SHARED, dev->name, dev) != 0) {
printk(KERN_INFO "forcedeth: request_irq failed for link %d\n", ret);
pci_disable_msix(np->pci_dev);
np->msi_flags &= ~NV_MSI_X_ENABLED;
@@ -2651,9 +2651,9 @@
} else {
/* Request irq for all interrupts */
if ((!intr_test &&
- request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) ||
+ request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq, IRQF_SHARED, dev->name, dev) != 0) ||
(intr_test &&
- request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq_test, SA_SHIRQ, dev->name, dev) != 0)) {
+ request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq_test, IRQF_SHARED, dev->name, dev) != 0)) {
printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
pci_disable_msix(np->pci_dev);
np->msi_flags &= ~NV_MSI_X_ENABLED;
@@ -2669,8 +2669,8 @@
if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
np->msi_flags |= NV_MSI_ENABLED;
- if ((!intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) ||
- (intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq_test, SA_SHIRQ, dev->name, dev) != 0)) {
+ if ((!intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq, IRQF_SHARED, dev->name, dev) != 0) ||
+ (intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq_test, IRQF_SHARED, dev->name, dev) != 0)) {
printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
pci_disable_msi(np->pci_dev);
np->msi_flags &= ~NV_MSI_ENABLED;
@@ -2685,8 +2685,8 @@
}
}
if (ret != 0) {
- if ((!intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) ||
- (intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq_test, SA_SHIRQ, dev->name, dev) != 0))
+ if ((!intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq, IRQF_SHARED, dev->name, dev) != 0) ||
+ (intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq_test, IRQF_SHARED, dev->name, dev) != 0))
goto out_err;
}
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index e96a93c..f6abff5 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -671,7 +671,7 @@
struct fs_enet_private *fep = netdev_priv(dev);
(*fep->ops->pre_request_irq)(dev, irq);
- return request_irq(irq, irqf, SA_SHIRQ, name, dev);
+ return request_irq(irq, irqf, IRQF_SHARED, name, dev);
}
static void fs_free_irq(struct net_device *dev, int irq)
diff --git a/drivers/net/gt96100eth.c b/drivers/net/gt96100eth.c
index 2d24354..49dacc6 100644
--- a/drivers/net/gt96100eth.c
+++ b/drivers/net/gt96100eth.c
@@ -1030,7 +1030,7 @@
}
if ((retval = request_irq(dev->irq, >96100_interrupt,
- SA_SHIRQ, dev->name, dev))) {
+ IRQF_SHARED, dev->name, dev))) {
err("unable to get IRQ %d\n", dev->irq);
return retval;
}
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 0ea4cb4..7bcd939 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -871,7 +871,7 @@
u32 rx_int_var, tx_int_var;
u16 fifo_info;
- i = request_irq(dev->irq, &hamachi_interrupt, SA_SHIRQ, dev->name, dev);
+ i = request_irq(dev->irq, &hamachi_interrupt, IRQF_SHARED, dev->name, dev);
if (i)
return i;
diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c
index 232793d..55906c7 100644
--- a/drivers/net/hamradio/baycom_ser_fdx.c
+++ b/drivers/net/hamradio/baycom_ser_fdx.c
@@ -434,7 +434,7 @@
outb(0, FCR(dev->base_addr)); /* disable FIFOs */
outb(0x0d, MCR(dev->base_addr));
outb(0, IER(dev->base_addr));
- if (request_irq(dev->irq, ser12_interrupt, SA_INTERRUPT | SA_SHIRQ,
+ if (request_irq(dev->irq, ser12_interrupt, IRQF_DISABLED | IRQF_SHARED,
"baycom_ser_fdx", dev)) {
release_region(dev->base_addr, SER12_EXTENT);
return -EBUSY;
diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c
index be596a3..de95de8 100644
--- a/drivers/net/hamradio/baycom_ser_hdx.c
+++ b/drivers/net/hamradio/baycom_ser_hdx.c
@@ -488,7 +488,7 @@
outb(0, FCR(dev->base_addr)); /* disable FIFOs */
outb(0x0d, MCR(dev->base_addr));
outb(0, IER(dev->base_addr));
- if (request_irq(dev->irq, ser12_interrupt, SA_INTERRUPT | SA_SHIRQ,
+ if (request_irq(dev->irq, ser12_interrupt, IRQF_DISABLED | IRQF_SHARED,
"baycom_ser12", dev)) {
release_region(dev->base_addr, SER12_EXTENT);
return -EBUSY;
diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c
index b9b10ca..df4b681 100644
--- a/drivers/net/hamradio/scc.c
+++ b/drivers/net/hamradio/scc.c
@@ -1736,7 +1736,7 @@
if (!Ivec[hwcfg.irq].used && hwcfg.irq)
{
- if (request_irq(hwcfg.irq, scc_isr, SA_INTERRUPT, "AX.25 SCC", NULL))
+ if (request_irq(hwcfg.irq, scc_isr, IRQF_DISABLED, "AX.25 SCC", NULL))
printk(KERN_WARNING "z8530drv: warning, cannot get IRQ %d\n", hwcfg.irq);
else
Ivec[hwcfg.irq].used = 1;
diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
index dd2f11c..f98f577 100644
--- a/drivers/net/hamradio/yam.c
+++ b/drivers/net/hamradio/yam.c
@@ -873,7 +873,7 @@
goto out_release_base;
}
outb(0, IER(dev->base_addr));
- if (request_irq(dev->irq, yam_interrupt, SA_INTERRUPT | SA_SHIRQ, dev->name, dev)) {
+ if (request_irq(dev->irq, yam_interrupt, IRQF_DISABLED | IRQF_SHARED, dev->name, dev)) {
printk(KERN_ERR "%s: irq %d busy\n", dev->name, dev->irq);
ret = -EBUSY;
goto out_release_base;
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index dd1dc32..e7d9bf3 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -1079,7 +1079,7 @@
/* New: if bus is PCI or EISA, interrupts might be shared interrupts */
if (request_irq(dev->irq, hp100_interrupt,
lp->bus == HP100_BUS_PCI || lp->bus ==
- HP100_BUS_EISA ? SA_SHIRQ : SA_INTERRUPT,
+ HP100_BUS_EISA ? IRQF_SHARED : IRQF_DISABLED,
"hp100", dev)) {
printk("hp100: %s: unable to get IRQ %d\n", dev->name, dev->irq);
return -EAGAIN;
diff --git a/drivers/net/hydra.c b/drivers/net/hydra.c
index d9fb8e7..91326ea 100644
--- a/drivers/net/hydra.c
+++ b/drivers/net/hydra.c
@@ -117,7 +117,7 @@
dev->irq = IRQ_AMIGA_PORTS;
/* Install the Interrupt handler */
- if (request_irq(IRQ_AMIGA_PORTS, ei_interrupt, SA_SHIRQ, "Hydra Ethernet",
+ if (request_irq(IRQ_AMIGA_PORTS, ei_interrupt, IRQF_SHARED, "Hydra Ethernet",
dev)) {
free_netdev(dev);
return -EAGAIN;
diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index 51fd516..2a95d72 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -782,7 +782,7 @@
/* register resources - only necessary for IRQ */
- result = request_irq(priv->realirq, irq_handler, SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev);
+ result = request_irq(priv->realirq, irq_handler, IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
if (result != 0) {
printk(KERN_ERR "%s: failed to register irq %d\n", dev->name, dev->irq);
return result;
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index dbf6775..68d8af7 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -1063,7 +1063,7 @@
{
struct ioc3_private *ip = netdev_priv(dev);
- if (request_irq(dev->irq, ioc3_interrupt, SA_SHIRQ, ioc3_str, dev)) {
+ if (request_irq(dev->irq, ioc3_interrupt, IRQF_SHARED, ioc3_str, dev)) {
printk(KERN_ERR "%s: Can't get irq %d\n", dev->name, dev->irq);
return -EAGAIN;
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 910c0ca..33c07d5 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -1372,7 +1372,7 @@
return 0;
if (request_irq (self->io.irq, toshoboe_interrupt,
- SA_SHIRQ | SA_INTERRUPT, dev->name, (void *) self))
+ IRQF_SHARED | IRQF_DISABLED, dev->name, (void *) self))
{
return -EAGAIN;
}
@@ -1573,7 +1573,7 @@
self->io.fir_base = self->base;
self->io.fir_ext = OBOE_IO_EXTENT;
self->io.irq = pci_dev->irq;
- self->io.irqflags = SA_SHIRQ | SA_INTERRUPT;
+ self->io.irqflags = IRQF_SHARED | IRQF_DISABLED;
self->speed = self->io.speed = 9600;
self->async = 0;
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index b9f28b1..92d646c 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -1517,7 +1517,7 @@
outb(IRINTR_INT_MASK, ndev->base_addr+VLSI_PIO_IRINTR);
- if (request_irq(ndev->irq, vlsi_interrupt, SA_SHIRQ,
+ if (request_irq(ndev->irq, vlsi_interrupt, IRQF_SHARED,
drivername, ndev)) {
IRDA_WARNING("%s: couldn't get IRQ: %d\n",
__FUNCTION__, ndev->irq);
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 8bb32f9..b91e082 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -253,7 +253,7 @@
#endif
if((err = request_irq(adapter->pdev->irq, &ixgb_intr,
- SA_SHIRQ | SA_SAMPLE_RANDOM,
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM,
netdev->name, netdev))) {
DPRINTK(PROBE, ERR,
"Unable to allocate interrupt Error: %d\n", err);
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
index 99229a0..6eeb965 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -235,7 +235,7 @@
if (!nds_open++) {
err = request_irq(IRQ_IXP2000_THDA0, ixpdev_interrupt,
- SA_SHIRQ, "ixp2000_eth", nds);
+ IRQF_SHARED, "ixp2000_eth", nds);
if (err) {
nds_open--;
return err;
diff --git a/drivers/net/jazzsonic.c b/drivers/net/jazzsonic.c
index 272d331d..661d75b 100644
--- a/drivers/net/jazzsonic.c
+++ b/drivers/net/jazzsonic.c
@@ -260,7 +260,7 @@
module_param(sonic_debug, int, 0);
MODULE_PARM_DESC(sonic_debug, "jazzsonic debug level (1-4)");
-#define SONIC_IRQ_FLAG SA_INTERRUPT
+#define SONIC_IRQ_FLAG IRQF_DISABLED
#include "sonic.c"
diff --git a/drivers/net/lp486e.c b/drivers/net/lp486e.c
index bf3f343..b783a69 100644
--- a/drivers/net/lp486e.c
+++ b/drivers/net/lp486e.c
@@ -851,7 +851,7 @@
{
int i;
- i = request_irq(dev->irq, &i596_interrupt, SA_SHIRQ, dev->name, dev);
+ i = request_irq(dev->irq, &i596_interrupt, IRQF_SHARED, dev->name, dev);
if (i) {
printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq);
return i;
diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c
index bbffb58..07e58f4 100644
--- a/drivers/net/mipsnet.c
+++ b/drivers/net/mipsnet.c
@@ -179,7 +179,7 @@
pr_debug("%s: mipsnet_open\n", dev->name);
err = request_irq(dev->irq, &mipsnet_interrupt,
- SA_SHIRQ, dev->name, (void *) dev);
+ IRQF_SHARED, dev->name, (void *) dev);
if (err) {
pr_debug("%s: %s(): can't get irq %d\n",
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 625ff61..760c61b 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -778,7 +778,7 @@
int err;
err = request_irq(dev->irq, mv643xx_eth_int_handler,
- SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev);
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
if (err) {
printk(KERN_ERR "Can not assign IRQ number to MV643XX_eth%d\n",
port_num);
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index dbdf189..72aad42 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -2413,7 +2413,7 @@
pci_enable_device(pdev);
pci_set_master(pdev);
- status = request_irq(pdev->irq, myri10ge_intr, SA_SHIRQ,
+ status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
netdev->name, mgp);
if (status != 0) {
dev_err(&pdev->dev, "failed to allocate IRQ\n");
@@ -2694,7 +2694,7 @@
mgp->msi_enabled = 1;
}
- status = request_irq(pdev->irq, myri10ge_intr, SA_SHIRQ,
+ status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
netdev->name, mgp);
if (status != 0) {
dev_err(&pdev->dev, "failed to allocate IRQ\n");
diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index 1998106..1b965a2 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -1069,7 +1069,7 @@
/* Register interrupt handler now. */
DET(("Requesting MYRIcom IRQ line.\n"));
if (request_irq(dev->irq, &myri_interrupt,
- SA_SHIRQ, "MyriCOM Ethernet", (void *) dev)) {
+ IRQF_SHARED, "MyriCOM Ethernet", (void *) dev)) {
printk("MyriCOM: Cannot register interrupt handler.\n");
goto err;
}
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 438c63f..9df2628 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -1574,7 +1574,7 @@
/* Reset the chip, just in case. */
natsemi_reset(dev);
- i = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev);
+ i = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
if (i) return i;
if (netif_msg_ifup(np))
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c
index ced9fdb..fa50eb8 100644
--- a/drivers/net/ne2k-pci.c
+++ b/drivers/net/ne2k-pci.c
@@ -420,7 +420,7 @@
static int ne2k_pci_open(struct net_device *dev)
{
- int ret = request_irq(dev->irq, ei_interrupt, SA_SHIRQ, dev->name, dev);
+ int ret = request_irq(dev->irq, ei_interrupt, IRQF_SHARED, dev->name, dev);
if (ret)
return ret;
diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c
index b92430c..b1311ae 100644
--- a/drivers/net/netx-eth.c
+++ b/drivers/net/netx-eth.c
@@ -223,7 +223,7 @@
struct netx_eth_priv *priv = netdev_priv(ndev);
if (request_irq
- (ndev->irq, &netx_eth_interrupt, SA_SHIRQ, ndev->name, ndev))
+ (ndev->irq, &netx_eth_interrupt, IRQF_SHARED, ndev->name, ndev))
return -EAGAIN;
writel(ndev->dev_addr[0] |
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index deedd7b..70429108 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -1881,7 +1881,7 @@
dev->IMR_cache = 0;
- err = request_irq(pci_dev->irq, ns83820_irq, SA_SHIRQ,
+ err = request_irq(pci_dev->irq, ns83820_irq, IRQF_SHARED,
DRV_NAME, ndev);
if (err) {
printk(KERN_INFO "ns83820: unable to register irq %d\n",
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 978b95a..3388ee1 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -1075,7 +1075,7 @@
DPRINTK ("ENTER\n");
- retval = request_irq (dev->irq, netdrv_interrupt, SA_SHIRQ, dev->name, dev);
+ retval = request_irq (dev->irq, netdrv_interrupt, IRQF_SHARED, dev->name, dev);
if (retval) {
DPRINTK ("EXIT, returning %d\n", retval);
return retval;
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 2ea66ac..297e9f8 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -535,7 +535,7 @@
link->open++;
- request_irq(dev->irq, ei_irq_wrapper, SA_SHIRQ, "axnet_cs", dev);
+ request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, "axnet_cs", dev);
info->link_status = 0x00;
init_timer(&info->watchdog);
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 661bfe5..0ecebfc 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -998,7 +998,7 @@
link->open++;
set_misc_reg(dev);
- request_irq(dev->irq, ei_irq_wrapper, SA_SHIRQ, dev_info, dev);
+ request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev_info, dev);
info->phy_id = info->eth_phy;
info->link_status = 0x00;
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 0e01c75..d768f3d 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1541,7 +1541,7 @@
unsigned long flags;
if (request_irq(dev->irq, &pcnet32_interrupt,
- lp->shared_irq ? SA_SHIRQ : 0, dev->name,
+ lp->shared_irq ? IRQF_SHARED : 0, dev->name,
(void *)dev)) {
return -EAGAIN;
}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 44bcd3e..7d5c223 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -556,7 +556,7 @@
INIT_WORK(&phydev->phy_queue, phy_change, phydev);
if (request_irq(phydev->irq, phy_interrupt,
- SA_SHIRQ,
+ IRQF_SHARED,
"phy_interrupt",
phydev) < 0) {
printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n",
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 12d1cb2..16a0ef1 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1726,7 +1726,7 @@
rtl8169_set_rxbufsize(tp, dev);
retval =
- request_irq(dev->irq, rtl8169_interrupt, SA_SHIRQ, dev->name, dev);
+ request_irq(dev->irq, rtl8169_interrupt, IRQF_SHARED, dev->name, dev);
if (retval < 0)
goto out;
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index 757c542..c3ed734 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -1252,7 +1252,7 @@
readl(®s->HostCtrl);
spin_unlock_irqrestore(&rrpriv->lock, flags);
- if (request_irq(dev->irq, rr_interrupt, SA_SHIRQ, dev->name, dev)) {
+ if (request_irq(dev->irq, rr_interrupt, IRQF_SHARED, dev->name, dev)) {
printk(KERN_WARNING "%s: Requested IRQ %d is busy\n",
dev->name, dev->irq);
ecode = -EAGAIN;
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 001344c..c6b77ac 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3761,7 +3761,7 @@
/* After proper initialization of H/W, register ISR */
if (sp->intr_type == MSI) {
err = request_irq((int) sp->pdev->irq, s2io_msi_handle,
- SA_SHIRQ, sp->name, dev);
+ IRQF_SHARED, sp->name, dev);
if (err) {
DBG_PRINT(ERR_DBG, "%s: MSI registration \
failed\n", dev->name);
@@ -3799,7 +3799,7 @@
}
}
if (sp->intr_type == INTA) {
- err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ,
+ err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
sp->name, dev);
if (err) {
DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index c7b5f00..9ab1618 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -2450,7 +2450,7 @@
*/
__raw_readq(sc->sbm_isr);
- if (request_irq(dev->irq, &sbmac_intr, SA_SHIRQ, dev->name, dev))
+ if (request_irq(dev->irq, &sbmac_intr, IRQF_SHARED, dev->name, dev))
return -EBUSY;
/*
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index df39f34..df0cbeb 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -1054,7 +1054,7 @@
sis190_request_timer(dev);
- rc = request_irq(dev->irq, sis190_interrupt, SA_SHIRQ, dev->name, dev);
+ rc = request_irq(dev->irq, sis190_interrupt, IRQF_SHARED, dev->name, dev);
if (rc < 0)
goto err_release_timer_2;
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index d058741..29ee7ff 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1013,7 +1013,7 @@
/* Equalizer workaround Rule */
sis630_set_eq(net_dev, sis_priv->chipset_rev);
- ret = request_irq(net_dev->irq, &sis900_interrupt, SA_SHIRQ,
+ ret = request_irq(net_dev->irq, &sis900_interrupt, IRQF_SHARED,
net_dev->name, net_dev);
if (ret)
return ret;
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index f3efbd1..ee62845 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -570,9 +570,9 @@
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
if (pAC->GIni.GIMacsFound == 2) {
- Ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, "sk98lin", dev);
+ Ret = request_irq(dev->irq, SkGeIsr, IRQF_SHARED, "sk98lin", dev);
} else if (pAC->GIni.GIMacsFound == 1) {
- Ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ,
+ Ret = request_irq(dev->irq, SkGeIsrOnePort, IRQF_SHARED,
"sk98lin", dev);
} else {
printk(KERN_WARNING "sk98lin: Illegal number of ports: %d\n",
@@ -5073,9 +5073,9 @@
pci_enable_device(pdev);
pci_set_master(pdev);
if (pAC->GIni.GIMacsFound == 2)
- ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, "sk98lin", dev);
+ ret = request_irq(dev->irq, SkGeIsr, IRQF_SHARED, "sk98lin", dev);
else
- ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, "sk98lin", dev);
+ ret = request_irq(dev->irq, SkGeIsrOnePort, IRQF_SHARED, "sk98lin", dev);
if (ret) {
printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq);
pAC->AllocFlag &= ~SK_ALLOC_IRQ;
diff --git a/drivers/net/sk_mca.c b/drivers/net/sk_mca.c
index e5d6d95..799e098 100644
--- a/drivers/net/sk_mca.c
+++ b/drivers/net/sk_mca.c
@@ -824,7 +824,7 @@
/* register resources - only necessary for IRQ */
result =
request_irq(priv->realirq, irq_handler,
- SA_SHIRQ | SA_SAMPLE_RANDOM, "sk_mca", dev);
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM, "sk_mca", dev);
if (result != 0) {
printk("%s: failed to register irq %d\n", dev->name,
dev->irq);
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index c7fb613..b5714a60 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -497,7 +497,7 @@
PRINTK(KERN_INFO "entering skfp_open\n");
/* Register IRQ - support shared interrupts by passing device ptr */
- err = request_irq(dev->irq, (void *) skfp_interrupt, SA_SHIRQ,
+ err = request_irq(dev->irq, (void *) skfp_interrupt, IRQF_SHARED,
dev->name, dev);
if (err)
return err;
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 82df13b..82200bf 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -3341,7 +3341,7 @@
goto err_out_free_hw;
}
- err = request_irq(pdev->irq, skge_intr, SA_SHIRQ, DRV_NAME, hw);
+ err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, DRV_NAME, hw);
if (err) {
printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
pci_name(pdev), pdev->irq);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 3f1b0fe..418f169 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3188,7 +3188,7 @@
sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
- err = request_irq(pdev->irq, sky2_test_intr, SA_SHIRQ, DRV_NAME, hw);
+ err = request_irq(pdev->irq, sky2_test_intr, IRQF_SHARED, DRV_NAME, hw);
if (err) {
printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
pci_name(pdev), pdev->irq);
@@ -3348,7 +3348,7 @@
goto err_out_unregister;
}
- err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ, DRV_NAME, hw);
+ err = request_irq(pdev->irq, sky2_intr, IRQF_SHARED, DRV_NAME, hw);
if (err) {
printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
pci_name(pdev), pdev->irq);
diff --git a/drivers/net/smc-ultra32.c b/drivers/net/smc-ultra32.c
index ff9bd97..85be22a 100644
--- a/drivers/net/smc-ultra32.c
+++ b/drivers/net/smc-ultra32.c
@@ -290,7 +290,7 @@
static int ultra32_open(struct net_device *dev)
{
int ioaddr = dev->base_addr - ULTRA32_NIC_OFFSET; /* ASIC addr */
- int irq_flags = (inb(ioaddr + ULTRA32_CFG5) & 0x08) ? 0 : SA_SHIRQ;
+ int irq_flags = (inb(ioaddr + ULTRA32_CFG5) & 0x08) ? 0 : IRQF_SHARED;
int retval;
retval = request_irq(dev->irq, ei_interrupt, irq_flags, dev->name, dev);
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index bdd8702..d37bd86 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -2081,7 +2081,7 @@
lp->ctl_rspeed = 100;
/* Grab the IRQ */
- retval = request_irq(dev->irq, &smc911x_interrupt, SA_SHIRQ, dev->name, dev);
+ retval = request_irq(dev->irq, &smc911x_interrupt, IRQF_SHARED, dev->name, dev);
if (retval)
goto err_out;
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index bf776125c..b402804 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -207,7 +207,7 @@
machine_is_omap_h2() \
|| machine_is_omap_h3() \
|| (machine_is_omap_innovator() && !cpu_is_omap1510()) \
- ) ? SA_TRIGGER_FALLING : SA_TRIGGER_RISING)
+ ) ? IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING)
#elif defined(CONFIG_SH_SH4202_MICRODEV)
@@ -540,7 +540,7 @@
#endif
#ifndef SMC_IRQ_FLAGS
-#define SMC_IRQ_FLAGS SA_TRIGGER_RISING
+#define SMC_IRQ_FLAGS IRQF_TRIGGER_RISING
#endif
#ifndef SMC_INTERRUPT_PREAMBLE
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index e0b7267..fb1d5a8 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -1744,7 +1744,7 @@
result = -EBUSY;
if (request_irq(netdev->irq, spider_net_interrupt,
- SA_SHIRQ, netdev->name, netdev))
+ IRQF_SHARED, netdev->name, netdev))
goto register_int_failed;
spider_net_enable_card(card);
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index f91be95..ed1f599 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -1070,7 +1070,7 @@
/* Do we ever need to reset the chip??? */
- retval = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev);
+ retval = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
if (retval)
return retval;
diff --git a/drivers/net/sun3lance.c b/drivers/net/sun3lance.c
index a2fad50..2dcadb1 100644
--- a/drivers/net/sun3lance.c
+++ b/drivers/net/sun3lance.c
@@ -341,7 +341,7 @@
REGA(CSR0) = CSR0_STOP;
- request_irq(LANCE_IRQ, lance_interrupt, SA_INTERRUPT, "SUN3 Lance", dev);
+ request_irq(LANCE_IRQ, lance_interrupt, IRQF_DISABLED, "SUN3 Lance", dev);
dev->irq = (unsigned short)LANCE_IRQ;
diff --git a/drivers/net/sunbmac.c b/drivers/net/sunbmac.c
index 7127f0f..d468915 100644
--- a/drivers/net/sunbmac.c
+++ b/drivers/net/sunbmac.c
@@ -918,7 +918,7 @@
struct bigmac *bp = (struct bigmac *) dev->priv;
int ret;
- ret = request_irq(dev->irq, &bigmac_interrupt, SA_SHIRQ, dev->name, bp);
+ ret = request_irq(dev->irq, &bigmac_interrupt, IRQF_SHARED, dev->name, bp);
if (ret) {
printk(KERN_ERR "BIGMAC: Can't order irq %d to go.\n", dev->irq);
return ret;
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index f13b2a1..643fcea 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -870,7 +870,7 @@
/* Do we need to reset the chip??? */
- i = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev);
+ i = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
if (i)
return i;
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 5248670..b70bbd7 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -2220,7 +2220,7 @@
spin_unlock_irqrestore(&gp->lock, flags);
if (request_irq(gp->pdev->irq, gem_interrupt,
- SA_SHIRQ, dev->name, (void *)dev)) {
+ IRQF_SHARED, dev->name, (void *)dev)) {
printk(KERN_ERR "%s: failed to request irq !\n", gp->dev->name);
spin_lock_irqsave(&gp->lock, flags);
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index d85b832..8673fd4 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -2194,7 +2194,7 @@
*/
if ((hp->happy_flags & (HFLAG_QUATTRO|HFLAG_PCI)) != HFLAG_QUATTRO) {
if (request_irq(dev->irq, &happy_meal_interrupt,
- SA_SHIRQ, dev->name, (void *)dev)) {
+ IRQF_SHARED, dev->name, (void *)dev)) {
HMD(("EAGAIN\n"));
printk(KERN_ERR "happy_meal(SBUS): Can't order irq %d to go.\n",
dev->irq);
@@ -2608,7 +2608,7 @@
err = request_irq(sdev->irqs[0],
quattro_sbus_interrupt,
- SA_SHIRQ, "Quattro",
+ IRQF_SHARED, "Quattro",
qp);
if (err != 0) {
printk(KERN_ERR "Quattro: Fatal IRQ registery error %d.\n", err);
diff --git a/drivers/net/sunlance.c b/drivers/net/sunlance.c
index 5b0b60f..1ef9fd3 100644
--- a/drivers/net/sunlance.c
+++ b/drivers/net/sunlance.c
@@ -930,7 +930,7 @@
STOP_LANCE(lp);
- if (request_irq(dev->irq, &lance_interrupt, SA_SHIRQ,
+ if (request_irq(dev->irq, &lance_interrupt, IRQF_SHARED,
lancestr, (void *) dev)) {
printk(KERN_ERR "Lance: Can't get irq %d\n", dev->irq);
return -EAGAIN;
diff --git a/drivers/net/sunqe.c b/drivers/net/sunqe.c
index 9da6d5b..817a40b 100644
--- a/drivers/net/sunqe.c
+++ b/drivers/net/sunqe.c
@@ -811,7 +811,7 @@
qec_init_once(qecp, qec_sdev);
if (request_irq(qec_sdev->irqs[0], &qec_interrupt,
- SA_SHIRQ, "qec", (void *) qecp)) {
+ IRQF_SHARED, "qec", (void *) qecp)) {
printk(KERN_ERR "qec: Can't register irq.\n");
goto fail;
}
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index c2ec9fd..8b53ded 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -880,7 +880,7 @@
*/
if (dev->irq == 0 ||
- request_irq(dev->irq, &tc35815_interrupt, SA_SHIRQ, cardname, dev)) {
+ request_irq(dev->irq, &tc35815_interrupt, IRQF_SHARED, cardname, dev)) {
return -EAGAIN;
}
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 953255e..e5e1b29 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -6702,12 +6702,12 @@
fn = tg3_msi;
if (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI)
fn = tg3_msi_1shot;
- flags = SA_SAMPLE_RANDOM;
+ flags = IRQF_SAMPLE_RANDOM;
} else {
fn = tg3_interrupt;
if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)
fn = tg3_interrupt_tagged;
- flags = SA_SHIRQ | SA_SAMPLE_RANDOM;
+ flags = IRQF_SHARED | IRQF_SAMPLE_RANDOM;
}
return (request_irq(tp->pdev->irq, fn, flags, dev->name, dev));
}
@@ -6726,7 +6726,7 @@
free_irq(tp->pdev->irq, dev);
err = request_irq(tp->pdev->irq, tg3_test_isr,
- SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev);
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
if (err)
return err;
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 12076f8..23c0017 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -943,7 +943,7 @@
int err;
priv->tlanRev = TLan_DioRead8( dev->base_addr, TLAN_DEF_REVISION );
- err = request_irq( dev->irq, TLan_HandleInterrupt, SA_SHIRQ, TLanSignature, dev );
+ err = request_irq( dev->irq, TLan_HandleInterrupt, IRQF_SHARED, TLanSignature, dev );
if ( err ) {
printk(KERN_ERR "TLAN: Cannot open %s because IRQ %d is already in use.\n", dev->name, dev->irq );
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 77bb298..465921e 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -576,7 +576,7 @@
u16 switchsettings, switchsettings_eeprom ;
- if(request_irq(dev->irq, &xl_interrupt, SA_SHIRQ , "3c359", dev)) {
+ if(request_irq(dev->irq, &xl_interrupt, IRQF_SHARED , "3c359", dev)) {
return -EAGAIN;
}
diff --git a/drivers/net/tokenring/abyss.c b/drivers/net/tokenring/abyss.c
index 649d8ea..1bdd3be 100644
--- a/drivers/net/tokenring/abyss.c
+++ b/drivers/net/tokenring/abyss.c
@@ -123,7 +123,7 @@
goto err_out_trdev;
}
- ret = request_irq(pdev->irq, tms380tr_interrupt, SA_SHIRQ,
+ ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
dev->name, dev);
if (ret)
goto err_out_region;
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 30dcdae..28d968f 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -601,7 +601,7 @@
rc=streamer_reset(dev);
}
- if (request_irq(dev->irq, &streamer_interrupt, SA_SHIRQ, "lanstreamer", dev)) {
+ if (request_irq(dev->irq, &streamer_interrupt, IRQF_SHARED, "lanstreamer", dev)) {
return -EAGAIN;
}
#if STREAMER_DEBUG
diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c
index 19e6f4d..666bbaa 100644
--- a/drivers/net/tokenring/madgemc.c
+++ b/drivers/net/tokenring/madgemc.c
@@ -311,7 +311,7 @@
*/
outb(0, dev->base_addr + MC_CONTROL_REG0); /* sanity */
madgemc_setsifsel(dev, 1);
- if (request_irq(dev->irq, madgemc_interrupt, SA_SHIRQ,
+ if (request_irq(dev->irq, madgemc_interrupt, IRQF_SHARED,
"madgemc", dev)) {
ret = -EBUSY;
goto getout3;
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index d7a30d9..8583148 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -445,7 +445,7 @@
olympic_init(dev);
- if(request_irq(dev->irq, &olympic_interrupt, SA_SHIRQ , "olympic", dev)) {
+ if(request_irq(dev->irq, &olympic_interrupt, IRQF_SHARED , "olympic", dev)) {
return -EAGAIN;
}
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index f2807ab..cd2e025 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -531,7 +531,7 @@
dev->irq = 15;
break;
}
- if (request_irq(dev->irq, smctr_interrupt, SA_SHIRQ, smctr_name, dev)) {
+ if (request_irq(dev->irq, smctr_interrupt, IRQF_SHARED, smctr_name, dev)) {
release_region(dev->base_addr, SMCTR_IO_EXTENT);
return -ENODEV;
}
@@ -1061,7 +1061,7 @@
goto out2;
}
- if (request_irq(dev->irq, smctr_interrupt, SA_SHIRQ, smctr_name, dev))
+ if (request_irq(dev->irq, smctr_interrupt, IRQF_SHARED, smctr_name, dev))
goto out2;
/* Get 58x Rom Base */
diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c
index ab47c05..7d3e270 100644
--- a/drivers/net/tokenring/tmspci.c
+++ b/drivers/net/tokenring/tmspci.c
@@ -122,7 +122,7 @@
goto err_out_trdev;
}
- ret = request_irq(pdev->irq, tms380tr_interrupt, SA_SHIRQ,
+ ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
dev->name, dev);
if (ret)
goto err_out_region;
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index 354294c..d05c5aa 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -1371,7 +1371,7 @@
dw32(IntrMask, 0);
- rc = request_irq(dev->irq, de_interrupt, SA_SHIRQ, dev->name, dev);
+ rc = request_irq(dev->irq, de_interrupt, IRQF_SHARED, dev->name, dev);
if (rc) {
printk(KERN_ERR "%s: IRQ %d request failure, err=%d\n",
dev->name, dev->irq, rc);
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index 2647a5b..75ff14a 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -292,7 +292,7 @@
0.41 21-Mar-96 Don't check for get_hw_addr checksum unless DEC card
only <niles@axp745gsfc.nasa.gov>
Fix for multiple PCI cards reported by <jos@xos.nl>
- Duh, put the SA_SHIRQ flag into request_interrupt().
+ Duh, put the IRQF_SHARED flag into request_interrupt().
Fix SMC ethernet address in enet_det[].
Print chip name instead of "UNKNOWN" during boot.
0.42 26-Apr-96 Fix MII write TA bit error.
@@ -353,7 +353,7 @@
infoblocks.
Added DC21142 and DC21143 functions.
Added byte counters from <phil@tazenda.demon.co.uk>
- Added SA_INTERRUPT temporary fix from
+ Added IRQF_DISABLED temporary fix from
<mjacob@feral.com>.
0.53 12-Nov-97 Fix the *_probe() to include 'eth??' name during
module load: bug reported by
@@ -1319,10 +1319,10 @@
lp->state = OPEN;
de4x5_dbg_open(dev);
- if (request_irq(dev->irq, (void *)de4x5_interrupt, SA_SHIRQ,
+ if (request_irq(dev->irq, (void *)de4x5_interrupt, IRQF_SHARED,
lp->adapter_name, dev)) {
printk("de4x5_open(): Requested IRQ%d is busy - attemping FAST/SHARE...", dev->irq);
- if (request_irq(dev->irq, de4x5_interrupt, SA_INTERRUPT | SA_SHIRQ,
+ if (request_irq(dev->irq, de4x5_interrupt, IRQF_DISABLED | IRQF_SHARED,
lp->adapter_name, dev)) {
printk("\n Cannot get IRQ- reconfigure your hardware.\n");
disable_ast(dev);
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index ba5b112..4e5b0f2 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -506,7 +506,7 @@
DMFE_DBUG(0, "dmfe_open", 0);
- ret = request_irq(dev->irq, &dmfe_interrupt, SA_SHIRQ, dev->name, dev);
+ ret = request_irq(dev->irq, &dmfe_interrupt, IRQF_SHARED, dev->name, dev);
if (ret)
return ret;
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 8f4f484..7351831 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -489,7 +489,7 @@
{
int retval;
- if ((retval = request_irq(dev->irq, &tulip_interrupt, SA_SHIRQ, dev->name, dev)))
+ if ((retval = request_irq(dev->irq, &tulip_interrupt, IRQF_SHARED, dev->name, dev)))
return retval;
tulip_init_ring (dev);
@@ -1770,7 +1770,7 @@
pci_enable_device(pdev);
- if ((retval = request_irq(dev->irq, &tulip_interrupt, SA_SHIRQ, dev->name, dev))) {
+ if ((retval = request_irq(dev->irq, &tulip_interrupt, IRQF_SHARED, dev->name, dev))) {
printk (KERN_ERR "tulip: request_irq failed in resume\n");
return retval;
}
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 8b3a28f..fd64b2b 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -436,7 +436,7 @@
ULI526X_DBUG(0, "uli526x_open", 0);
- ret = request_irq(dev->irq, &uli526x_interrupt, SA_SHIRQ, dev->name, dev);
+ ret = request_irq(dev->irq, &uli526x_interrupt, IRQF_SHARED, dev->name, dev);
if (ret)
return ret;
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 602a6e5..b4c0d10 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -658,7 +658,7 @@
iowrite32(0x00000001, ioaddr + PCIBusCfg); /* Reset */
netif_device_detach(dev);
- i = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev);
+ i = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
if (i)
goto out_err;
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 63c2175..f874e4f 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -457,7 +457,7 @@
int retval;
enter("xircom_open");
printk(KERN_INFO "xircom cardbus adaptor found, registering as %s, using irq %i \n",dev->name,dev->irq);
- retval = request_irq(dev->irq, &xircom_interrupt, SA_SHIRQ, dev->name, dev);
+ retval = request_irq(dev->irq, &xircom_interrupt, IRQF_SHARED, dev->name, dev);
if (retval) {
leave("xircom_open - No IRQ");
return retval;
diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c
index aecafda..091ebb7 100644
--- a/drivers/net/tulip/xircom_tulip_cb.c
+++ b/drivers/net/tulip/xircom_tulip_cb.c
@@ -807,7 +807,7 @@
{
struct xircom_private *tp = netdev_priv(dev);
- if (request_irq(dev->irq, &xircom_interrupt, SA_SHIRQ, dev->name, dev))
+ if (request_irq(dev->irq, &xircom_interrupt, IRQF_SHARED, dev->name, dev))
return -EAGAIN;
xircom_up(dev);
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index e24d2da..063816f2 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -2131,7 +2131,7 @@
goto out_sleep;
}
- err = request_irq(dev->irq, &typhoon_interrupt, SA_SHIRQ,
+ err = request_irq(dev->irq, &typhoon_interrupt, IRQF_SHARED,
dev->name, dev);
if(err < 0)
goto out_sleep;
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index c80a4f1..98b6f32 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -1210,7 +1210,7 @@
void __iomem *ioaddr = rp->base;
int rc;
- rc = request_irq(rp->pdev->irq, &rhine_interrupt, SA_SHIRQ, dev->name,
+ rc = request_irq(rp->pdev->irq, &rhine_interrupt, IRQF_SHARED, dev->name,
dev);
if (rc)
return rc;
@@ -1999,7 +1999,7 @@
if (!netif_running(dev))
return 0;
- if (request_irq(dev->irq, rhine_interrupt, SA_SHIRQ, dev->name, dev))
+ if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev))
printk(KERN_ERR "via-rhine %s: request_irq failed\n", dev->name);
ret = pci_set_power_state(pdev, PCI_D0);
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 857d71c..ba2972b 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1750,7 +1750,7 @@
velocity_init_registers(vptr, VELOCITY_INIT_COLD);
- ret = request_irq(vptr->pdev->irq, &velocity_intr, SA_SHIRQ,
+ ret = request_irq(vptr->pdev->irq, &velocity_intr, IRQF_SHARED,
dev->name, dev);
if (ret < 0) {
/* Power down the chip */
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 04a376e..684af43 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -752,7 +752,7 @@
priv = pci_get_drvdata(pdev);
- rc = request_irq(pdev->irq, dscc4_irq, SA_SHIRQ, DRV_NAME, priv->root);
+ rc = request_irq(pdev->irq, dscc4_irq, IRQF_SHARED, DRV_NAME, priv->root);
if (rc < 0) {
printk(KERN_WARNING "%s: IRQ %d busy\n", DRV_NAME, pdev->irq);
goto err_release_4;
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 7981a2c..3705db04a 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -2519,7 +2519,7 @@
dbg(DBG_PCI, "kernel mem %p, ctlmem %p\n", card->mem, card->ctlmem);
/* Register the interrupt handler */
- if (request_irq(pdev->irq, fst_intr, SA_SHIRQ, FST_DEV_NAME, card)) {
+ if (request_irq(pdev->irq, fst_intr, IRQF_SHARED, FST_DEV_NAME, card)) {
printk_err("Unable to register interrupt %d\n", card->irq);
pci_release_regions(pdev);
pci_disable_device(pdev);
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index cf5c805..a4f7357 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -264,7 +264,7 @@
/* We want a fast IRQ for this device. Actually we'd like an even faster
IRQ ;) - This is one driver RtLinux is made for */
- if(request_irq(irq, &z8530_interrupt, SA_INTERRUPT, "Hostess SV11", dev)<0)
+ if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "Hostess SV11", dev)<0)
{
printk(KERN_WARNING "hostess: IRQ %d already in use.\n", irq);
goto fail1;
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 40926d7..39f4424 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -1058,7 +1058,7 @@
lmc_softreset (sc);
/* Since we have to use PCI bus, this should work on x86,alpha,ppc */
- if (request_irq (dev->irq, &lmc_interrupt, SA_SHIRQ, dev->name, dev)){
+ if (request_irq (dev->irq, &lmc_interrupt, IRQF_SHARED, dev->name, dev)){
printk(KERN_WARNING "%s: could not get irq: %d\n", dev->name, dev->irq);
lmc_trace(dev, "lmc_open irq failed out");
return -EAGAIN;
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index d7897ae..567efff 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -3600,7 +3600,7 @@
}
/* Allocate IRQ */
- if (request_irq(card->hw.irq, cpc_intr, SA_SHIRQ, "Cyclades-PC300", card)) {
+ if (request_irq(card->hw.irq, cpc_intr, IRQF_SHARED, "Cyclades-PC300", card)) {
printk ("PC300 found at RAM 0x%08x, but could not allocate IRQ%d.\n",
card->hw.ramphys, card->hw.irq);
goto err_io_unmap;
diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c
index 24c3c57..4df61fa 100644
--- a/drivers/net/wan/pci200syn.c
+++ b/drivers/net/wan/pci200syn.c
@@ -402,7 +402,7 @@
writew(readw(p) | 0x0040, p);
/* Allocate IRQ */
- if (request_irq(pdev->irq, sca_intr, SA_SHIRQ, devname, card)) {
+ if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, devname, card)) {
printk(KERN_WARNING "pci200syn: could not allocate IRQ%d.\n",
pdev->irq);
pci200_pci_remove_one(pdev);
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index f2d0712..fc75bec 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -1192,7 +1192,7 @@
}
}
- if( request_irq(dev->irq, sbni_interrupt, SA_SHIRQ, dev->name, dev) ) {
+ if( request_irq(dev->irq, sbni_interrupt, IRQF_SHARED, dev->name, dev) ) {
printk( KERN_ERR "%s: unable to get IRQ %d.\n",
dev->name, dev->irq );
return -EAGAIN;
diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c
index 050e854..70fb1b9 100644
--- a/drivers/net/wan/sealevel.c
+++ b/drivers/net/wan/sealevel.c
@@ -322,7 +322,7 @@
/* We want a fast IRQ for this device. Actually we'd like an even faster
IRQ ;) - This is one driver RtLinux is made for */
- if(request_irq(irq, &z8530_interrupt, SA_INTERRUPT, "SeaLevel", dev)<0)
+ if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "SeaLevel", dev)<0)
{
printk(KERN_WARNING "sealevel: IRQ %d already in use.\n", irq);
goto fail1_1;
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index 437e0e9..d564224 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -755,7 +755,7 @@
pci_name(pdev), plx_phy, ramsize / 1024, mem_phy, pdev->irq);
/* Allocate IRQ */
- if (request_irq(pdev->irq, wanxl_intr, SA_SHIRQ, "wanXL", card)) {
+ if (request_irq(pdev->irq, wanxl_intr, IRQF_SHARED, "wanXL", card)) {
printk(KERN_WARNING "wanXL %s: could not allocate IRQ%i.\n",
pci_name(pdev), pdev->irq);
wanxl_pci_remove_one(pdev);
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 89328d1..a4dd139 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -2848,7 +2848,7 @@
reset_card (dev, 1);
msleep(400);
- rc = request_irq( dev->irq, airo_interrupt, SA_SHIRQ, dev->name, dev );
+ rc = request_irq( dev->irq, airo_interrupt, IRQF_SHARED, dev->name, dev );
if (rc) {
airo_print_err(dev->name, "register interrupt %d failed, rc %d",
irq, rc);
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 54e31fa..995c7be 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -1577,7 +1577,7 @@
SET_NETDEV_DEV(dev, sys_dev);
- if ((rc = request_irq(dev->irq, service_interrupt, SA_SHIRQ, dev->name, dev))) {
+ if ((rc = request_irq(dev->irq, service_interrupt, IRQF_SHARED, dev->name, dev))) {
printk(KERN_ERR "%s: register interrupt %d failed, rc %d\n", dev->name, irq, rc);
goto err_out_free;
}
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index 27bcf47..d8f5600 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -2175,7 +2175,7 @@
}
#endif
res = request_irq(bcm->irq, bcm43xx_interrupt_handler,
- SA_SHIRQ, KBUILD_MODNAME, bcm);
+ IRQF_SHARED, KBUILD_MODNAME, bcm);
if (res) {
printk(KERN_ERR PFX "Cannot register IRQ%d\n", bcm->irq);
return -ENODEV;
diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c
index 5ea8ac8..c2fa011 100644
--- a/drivers/net/wireless/hostap/hostap_pci.c
+++ b/drivers/net/wireless/hostap/hostap_pci.c
@@ -337,7 +337,7 @@
pci_set_drvdata(pdev, dev);
- if (request_irq(dev->irq, prism2_interrupt, SA_SHIRQ, dev->name,
+ if (request_irq(dev->irq, prism2_interrupt, IRQF_SHARED, dev->name,
dev)) {
printk(KERN_WARNING "%s: request_irq failed\n", dev->name);
goto fail;
diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c
index 4ee6abb..49860fa 100644
--- a/drivers/net/wireless/hostap/hostap_plx.c
+++ b/drivers/net/wireless/hostap/hostap_plx.c
@@ -550,7 +550,7 @@
pci_set_drvdata(pdev, dev);
- if (request_irq(dev->irq, prism2_interrupt, SA_SHIRQ, dev->name,
+ if (request_irq(dev->irq, prism2_interrupt, IRQF_SHARED, dev->name,
dev)) {
printk(KERN_WARNING "%s: request_irq failed\n", dev->name);
goto fail;
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index 27f744e..e955db4 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -6229,7 +6229,7 @@
ipw2100_queues_initialize(priv);
err = request_irq(pci_dev->irq,
- ipw2100_interrupt, SA_SHIRQ, dev->name, priv);
+ ipw2100_interrupt, IRQF_SHARED, dev->name, priv);
if (err) {
printk(KERN_WARNING DRV_NAME
"Error calling request_irq: %d.\n", pci_dev->irq);
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index a8a8f97..b3300ff 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -11545,7 +11545,7 @@
ipw_sw_reset(priv, 1);
- err = request_irq(pdev->irq, ipw_isr, SA_SHIRQ, DRV_NAME, priv);
+ err = request_irq(pdev->irq, ipw_isr, IRQF_SHARED, DRV_NAME, priv);
if (err) {
IPW_ERROR("Error allocating IRQ %d\n", pdev->irq);
goto out_destroy_workqueue;
diff --git a/drivers/net/wireless/orinoco_nortel.c b/drivers/net/wireless/orinoco_nortel.c
index 4597fe1..bf05b90 100644
--- a/drivers/net/wireless/orinoco_nortel.c
+++ b/drivers/net/wireless/orinoco_nortel.c
@@ -198,7 +198,7 @@
hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
- err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
+ err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
dev->name, dev);
if (err) {
printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
diff --git a/drivers/net/wireless/orinoco_pci.c b/drivers/net/wireless/orinoco_pci.c
index de3eae0..1759c54 100644
--- a/drivers/net/wireless/orinoco_pci.c
+++ b/drivers/net/wireless/orinoco_pci.c
@@ -153,7 +153,7 @@
hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING);
- err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
+ err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
dev->name, dev);
if (err) {
printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
diff --git a/drivers/net/wireless/orinoco_pci.h b/drivers/net/wireless/orinoco_pci.h
index 7eb1e08..be1abea 100644
--- a/drivers/net/wireless/orinoco_pci.h
+++ b/drivers/net/wireless/orinoco_pci.h
@@ -63,7 +63,7 @@
pci_enable_device(pdev);
pci_restore_state(pdev);
- err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
+ err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
dev->name, dev);
if (err) {
printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n",
diff --git a/drivers/net/wireless/orinoco_plx.c b/drivers/net/wireless/orinoco_plx.c
index 3f928b8..7f006f6 100644
--- a/drivers/net/wireless/orinoco_plx.c
+++ b/drivers/net/wireless/orinoco_plx.c
@@ -237,7 +237,7 @@
hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
- err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
+ err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
dev->name, dev);
if (err) {
printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
diff --git a/drivers/net/wireless/orinoco_tmd.c b/drivers/net/wireless/orinoco_tmd.c
index 160a642..0831721 100644
--- a/drivers/net/wireless/orinoco_tmd.c
+++ b/drivers/net/wireless/orinoco_tmd.c
@@ -139,7 +139,7 @@
hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
- err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
+ err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
dev->name, dev);
if (err) {
printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index bfa0cc3..09fc17a 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -189,7 +189,7 @@
/* request for the interrupt before uploading the firmware */
rvalue = request_irq(pdev->irq, &islpci_interrupt,
- SA_SHIRQ, ndev->name, priv);
+ IRQF_SHARED, ndev->name, priv);
if (rvalue) {
/* error, could not hook the handler to the irq */
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 569305f..bbbf7e2 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -602,7 +602,7 @@
/* Reset the chip. */
iowrite32(0x80000000, ioaddr + DMACtrl);
- i = request_irq(dev->irq, &yellowfin_interrupt, SA_SHIRQ, dev->name, dev);
+ i = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
if (i) return i;
if (yellowfin_debug > 1)
diff --git a/drivers/net/zorro8390.c b/drivers/net/zorro8390.c
index 8037e58..df04e05 100644
--- a/drivers/net/zorro8390.c
+++ b/drivers/net/zorro8390.c
@@ -201,7 +201,7 @@
dev->irq = IRQ_AMIGA_PORTS;
/* Install the Interrupt handler */
- i = request_irq(IRQ_AMIGA_PORTS, ei_interrupt, SA_SHIRQ, DRV_NAME, dev);
+ i = request_irq(IRQ_AMIGA_PORTS, ei_interrupt, IRQF_SHARED, DRV_NAME, dev);
if (i) return i;
for(i = 0; i < ETHER_ADDR_LEN; i++) {
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index 58f0ce8..884965c 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -340,7 +340,7 @@
}
pcibios_register_hba(&eisa_dev.hba);
- result = request_irq(dev->irq, eisa_irq, SA_SHIRQ, "EISA", &eisa_dev);
+ result = request_irq(dev->irq, eisa_irq, IRQF_SHARED, "EISA", &eisa_dev);
if (result) {
printk(KERN_ERR "EISA: request_irq failed!\n");
return result;
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index a988dc7..4ee26a6 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -271,7 +271,7 @@
else
printk(KERN_ERR PFX "USB regulator not initialized!\n");
- if (request_irq(pdev->irq, superio_interrupt, SA_INTERRUPT,
+ if (request_irq(pdev->irq, superio_interrupt, IRQF_DISABLED,
SUPERIO, (void *)sio)) {
printk(KERN_ERR PFX "could not get irq\n");
diff --git a/drivers/parport/parport_ax88796.c b/drivers/parport/parport_ax88796.c
index 4baa719..1850632 100644
--- a/drivers/parport/parport_ax88796.c
+++ b/drivers/parport/parport_ax88796.c
@@ -345,7 +345,7 @@
if (irq >= 0) {
/* request irq */
ret = request_irq(irq, parport_ax88796_interrupt,
- SA_TRIGGER_FALLING, pdev->name, pp);
+ IRQF_TRIGGER_FALLING, pdev->name, pp);
if (ret < 0)
goto exit_port;
diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c
index c853647..b2b8092 100644
--- a/drivers/parport/parport_mfc3.c
+++ b/drivers/parport/parport_mfc3.c
@@ -353,7 +353,7 @@
if (p->irq != PARPORT_IRQ_NONE) {
if (use_cnt++ == 0)
- if (request_irq(IRQ_AMIGA_PORTS, mfc3_interrupt, SA_SHIRQ, p->name, &pp_mfc3_ops))
+ if (request_irq(IRQ_AMIGA_PORTS, mfc3_interrupt, IRQF_SHARED, p->name, &pp_mfc3_ops))
goto out_irq;
}
diff --git a/drivers/parport/parport_sunbpp.c b/drivers/parport/parport_sunbpp.c
index 7c43c53..fac333b 100644
--- a/drivers/parport/parport_sunbpp.c
+++ b/drivers/parport/parport_sunbpp.c
@@ -322,7 +322,7 @@
p->size = size;
if ((err = request_irq(p->irq, parport_sunbpp_interrupt,
- SA_SHIRQ, p->name, p)) != 0) {
+ IRQF_SHARED, p->name, p)) != 0) {
goto out_put_port;
}
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index 30d8714..d5df587 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -347,7 +347,7 @@
dbg("entered cpci_hp_intr");
/* Check to see if it was our interrupt */
- if ((controller->irq_flags & SA_SHIRQ) &&
+ if ((controller->irq_flags & IRQF_SHARED) &&
!controller->ops->check_irq(controller->dev_id)) {
dbg("exited cpci_hp_intr, not our interrupt");
return IRQ_NONE;
diff --git a/drivers/pci/hotplug/cpcihp_zt5550.c b/drivers/pci/hotplug/cpcihp_zt5550.c
index 584f853..1c12e91 100644
--- a/drivers/pci/hotplug/cpcihp_zt5550.c
+++ b/drivers/pci/hotplug/cpcihp_zt5550.c
@@ -35,7 +35,8 @@
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
-#include <linux/signal.h> /* SA_SHIRQ */
+#include <linux/interrupt.h>
+#include <linux/signal.h> /* IRQF_SHARED */
#include "cpci_hotplug.h"
#include "cpcihp_zt5550.h"
@@ -219,7 +220,7 @@
zt5550_hpc.ops = &zt5550_hpc_ops;
if(!poll) {
zt5550_hpc.irq = hc_dev->irq;
- zt5550_hpc.irq_flags = SA_SHIRQ;
+ zt5550_hpc.irq_flags = IRQF_SHARED;
zt5550_hpc.dev_id = hc_dev;
zt5550_hpc_ops.enable_irq = zt5550_hc_enable_irq;
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index e6e171f..1fc2599 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -1188,7 +1188,7 @@
/* set up the interrupt */
dbg("HPC interrupt = %d \n", ctrl->interrupt);
if (request_irq(ctrl->interrupt, cpqhp_ctrl_intr,
- SA_SHIRQ, MY_NAME, ctrl)) {
+ IRQF_SHARED, MY_NAME, ctrl)) {
err("Can't get irq %d for the hotplug pci controller\n",
ctrl->interrupt);
rc = -ENODEV;
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 11f7858..0d8fb6e 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -1458,7 +1458,7 @@
start_int_poll_timer( php_ctlr, 10 ); /* start with 10 second delay */
} else {
/* Installs the interrupt handler */
- rc = request_irq(php_ctlr->irq, pcie_isr, SA_SHIRQ, MY_NAME, (void *) ctrl);
+ rc = request_irq(php_ctlr->irq, pcie_isr, IRQF_SHARED, MY_NAME, (void *) ctrl);
dbg("%s: request_irq %d for hpc%d (returns %d)\n", __FUNCTION__, php_ctlr->irq, ctlr_seq_num, rc);
if (rc) {
err("Can't get irq %d for the hotplug controller\n", php_ctlr->irq);
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 45facaa..0f9798d 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -1246,7 +1246,7 @@
} else
php_ctlr->irq = pdev->irq;
- rc = request_irq(php_ctlr->irq, shpc_isr, SA_SHIRQ, MY_NAME, (void *) ctrl);
+ rc = request_irq(php_ctlr->irq, shpc_isr, IRQF_SHARED, MY_NAME, (void *) ctrl);
dbg("%s: request_irq %d for hpc%d (returns %d)\n", __FUNCTION__, php_ctlr->irq, ctlr_seq_num, rc);
if (rc) {
err("Can't get irq %d for the hotplug controller\n", php_ctlr->irq);
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 5256342..40569f4 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -267,7 +267,7 @@
/* must be a GPIO; ergo must trigger on both edges */
status = request_irq(board->det_pin, at91_cf_irq,
- SA_SAMPLE_RANDOM, driver_name, cf);
+ IRQF_SAMPLE_RANDOM, driver_name, cf);
if (status < 0)
goto fail0;
device_init_wakeup(&pdev->dev, 1);
@@ -280,7 +280,7 @@
*/
if (board->irq_pin) {
status = request_irq(board->irq_pin, at91_cf_irq,
- SA_SHIRQ, driver_name, cf);
+ IRQF_SHARED, driver_name, cf);
if (status < 0)
goto fail0a;
cf->socket.pci_irq = board->irq_pin;
diff --git a/drivers/pcmcia/hd64465_ss.c b/drivers/pcmcia/hd64465_ss.c
index c662e4f..ad02629 100644
--- a/drivers/pcmcia/hd64465_ss.c
+++ b/drivers/pcmcia/hd64465_ss.c
@@ -761,7 +761,7 @@
hd64465_register_irq_demux(sp->irq, hs_irq_demux, sp);
- if ((err = request_irq(sp->irq, hs_interrupt, SA_INTERRUPT, MODNAME, sp)) < 0)
+ if ((err = request_irq(sp->irq, hs_interrupt, IRQF_DISABLED, MODNAME, sp)) < 0)
return err;
if (request_mem_region(sp->mem_base, sp->mem_length, MODNAME) == 0) {
sp->mem_base = 0;
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index d5f03a3..2163aa7 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -149,7 +149,7 @@
/* Register the interrupt handler */
dprintk(KERN_DEBUG "Requesting interrupt %i \n",dev->irq);
- if ((ret = request_irq(dev->irq, i82092aa_interrupt, SA_SHIRQ, "i82092aa", i82092aa_interrupt))) {
+ if ((ret = request_irq(dev->irq, i82092aa_interrupt, IRQF_SHARED, "i82092aa", i82092aa_interrupt))) {
printk(KERN_ERR "i82092aa: Failed to register IRQ %d, aborting\n", dev->irq);
goto err_out_free_res;
}
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index ff51a65..1cc2682 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -509,7 +509,7 @@
static u_int __init test_irq(u_short sock, int irq)
{
debug(2, " testing ISA irq %d\n", irq);
- if (request_irq(irq, i365_count_irq, SA_PROBEIRQ, "scan",
+ if (request_irq(irq, i365_count_irq, IRQF_PROBE_SHARED, "scan",
i365_count_irq) != 0)
return 1;
irq_hits = 0; irq_sock = sock;
@@ -562,7 +562,7 @@
} else {
/* Fallback: just find interrupts that aren't in use */
for (i = 0; i < 16; i++)
- if ((mask0 & (1 << i)) && (_check_irq(i, SA_PROBEIRQ) == 0))
+ if ((mask0 & (1 << i)) && (_check_irq(i, IRQF_PROBE_SHARED) == 0))
mask1 |= (1 << i);
printk("default");
/* If scan failed, default to polled status */
@@ -726,7 +726,7 @@
u_int cs_mask = mask & ((cs_irq) ? (1<<cs_irq) : ~(1<<12));
for (cs_irq = 15; cs_irq > 0; cs_irq--)
if ((cs_mask & (1 << cs_irq)) &&
- (_check_irq(cs_irq, SA_PROBEIRQ) == 0))
+ (_check_irq(cs_irq, IRQF_PROBE_SHARED) == 0))
break;
if (cs_irq) {
grab_irq = 1;
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index 2c23d75..420e10a 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -232,7 +232,7 @@
dev_set_drvdata(dev, cf);
/* this primarily just shuts up irq handling noise */
- status = request_irq(irq, omap_cf_irq, SA_SHIRQ,
+ status = request_irq(irq, omap_cf_irq, IRQF_SHARED,
driver_name, cf);
if (status < 0)
goto fail0;
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 3281e51..7bf25b8 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -801,9 +801,9 @@
/* Decide what type of interrupt we are registering */
type = 0;
if (s->functions > 1) /* All of this ought to be handled higher up */
- type = SA_SHIRQ;
+ type = IRQF_SHARED;
if (req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)
- type = SA_SHIRQ;
+ type = IRQF_SHARED;
#ifdef CONFIG_PCMCIA_PROBE
if (s->irq.AssignedIRQ != 0) {
@@ -845,7 +845,7 @@
if (ret && !s->irq.AssignedIRQ) {
if (!s->pci_irq)
return ret;
- type = SA_SHIRQ;
+ type = IRQF_SHARED;
irq = s->pci_irq;
}
@@ -855,7 +855,7 @@
}
/* Make sure the fact the request type was overridden is passed back */
- if (type == SA_SHIRQ && !(req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)) {
+ if (type == IRQF_SHARED && !(req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)) {
req->Attributes |= IRQ_TYPE_DYNAMIC_SHARING;
printk(KERN_WARNING "pcmcia: request for exclusive IRQ could not be fulfilled.\n");
printk(KERN_WARNING "pcmcia: the driver needs updating to supported shared IRQ lines.\n");
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 9ee26c1..22c5e74 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -689,7 +689,7 @@
pci_set_drvdata(dev, socket);
if (irq_mode == 1) {
/* Register the interrupt handler */
- if ((ret = request_irq(dev->irq, pd6729_interrupt, SA_SHIRQ,
+ if ((ret = request_irq(dev->irq, pd6729_interrupt, IRQF_SHARED,
"pd6729", socket))) {
printk(KERN_ERR "pd6729: Failed to register irq %d, "
"aborting\n", dev->irq);
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 8ef3f91..ecaa132 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -523,7 +523,7 @@
if (irqs[i].sock != skt->nr)
continue;
res = request_irq(irqs[i].irq, soc_common_pcmcia_interrupt,
- SA_INTERRUPT, irqs[i].str, skt);
+ IRQF_DISABLED, irqs[i].str, skt);
if (res)
break;
set_irq_type(irqs[i].irq, IRQT_NOEDGE);
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index 459e6e1..e076a13 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -730,7 +730,7 @@
retval = vrc4171_add_sockets();
if (retval == 0)
- retval = request_irq(vrc4171_irq, pccard_interrupt, SA_SHIRQ,
+ retval = request_irq(vrc4171_irq, pccard_interrupt, IRQF_SHARED,
vrc4171_card_name, vrc4171_sockets);
if (retval < 0) {
diff --git a/drivers/pcmcia/vrc4173_cardu.c b/drivers/pcmcia/vrc4173_cardu.c
index 6004196..d19a913 100644
--- a/drivers/pcmcia/vrc4173_cardu.c
+++ b/drivers/pcmcia/vrc4173_cardu.c
@@ -500,7 +500,7 @@
return -ENOMEM;
}
- if (request_irq(dev->irq, cardu_interrupt, SA_SHIRQ, socket->name, socket) < 0) {
+ if (request_irq(dev->irq, cardu_interrupt, IRQF_SHARED, socket->name, socket) < 0) {
pcmcia_unregister_socket(socket->pcmcia_socket);
socket->pcmcia_socket = NULL;
iounmap(socket->base);
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 47e5760..1344746 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -923,7 +923,7 @@
socket->probe_status = 0;
- if (request_irq(socket->cb_irq, yenta_probe_handler, SA_SHIRQ, "yenta", socket)) {
+ if (request_irq(socket->cb_irq, yenta_probe_handler, IRQF_SHARED, "yenta", socket)) {
printk(KERN_WARNING "Yenta: request_irq() in yenta_probe_cb_irq() failed!\n");
return -1;
}
@@ -1172,7 +1172,7 @@
/* We must finish initialization here */
- if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, SA_SHIRQ, "yenta", socket)) {
+ if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) {
/* No IRQ or request_irq failed. Poll */
socket->cb_irq = 0; /* But zero is a valid IRQ number. */
init_timer(&socket->poll_timer);
diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c
index e7cf6be..5c8ec21 100644
--- a/drivers/pnp/resource.c
+++ b/drivers/pnp/resource.c
@@ -395,7 +395,8 @@
/* check if the resource is already in use, skip if the
* device is active because it itself may be in use */
if(!dev->active) {
- if (request_irq(*irq, pnp_test_handler, SA_INTERRUPT, "pnp", NULL))
+ if (request_irq(*irq, pnp_test_handler,
+ IRQF_DISABLED|IRQF_PROBE_SHARED, "pnp", NULL))
return 0;
free_irq(*irq, NULL);
}
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index d51afbe..f5b9f18 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -182,6 +182,22 @@
This driver can also be built as a module. If so, the module
will be called rtc-rs5c372.
+config RTC_DRV_S3C
+ tristate "Samsung S3C series SoC RTC"
+ depends on RTC_CLASS && ARCH_S3C2410
+ help
+ RTC (Realtime Clock) driver for the clock inbuilt into the
+ Samsung S3C24XX series of SoCs. This can provide periodic
+ interrupt rates from 1Hz to 64Hz for user programs, and
+ wakeup from Alarm.
+
+ The driver currently supports the common features on all the
+ S3C24XX range, such as the S3C2410, S3C2412, S3C2413, S3C2440
+ and S3C2442.
+
+ This driver can also be build as a module. If so, the module
+ will be called rtc-s3c.
+
config RTC_DRV_M48T86
tristate "ST M48T86/Dallas DS12887"
depends on RTC_CLASS
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index da5e387..5422071 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -19,6 +19,7 @@
obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o
obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o
obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o
+obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o
obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o
obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o
diff --git a/drivers/rtc/rtc-at91.c b/drivers/rtc/rtc-at91.c
index b676f44..dfd0ce8 100644
--- a/drivers/rtc/rtc-at91.c
+++ b/drivers/rtc/rtc-at91.c
@@ -293,7 +293,7 @@
AT91_RTC_CALEV);
ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt,
- SA_SHIRQ, "at91_rtc", pdev);
+ IRQF_SHARED, "at91_rtc", pdev);
if (ret) {
printk(KERN_ERR "at91_rtc: IRQ %d already in use.\n",
AT91_ID_SYS);
diff --git a/drivers/rtc/rtc-ds1553.c b/drivers/rtc/rtc-ds1553.c
index 762521a..2090014 100644
--- a/drivers/rtc/rtc-ds1553.c
+++ b/drivers/rtc/rtc-ds1553.c
@@ -341,7 +341,7 @@
if (pdata->irq >= 0) {
writeb(0, ioaddr + RTC_INTERRUPTS);
- if (request_irq(pdata->irq, ds1553_rtc_interrupt, SA_SHIRQ,
+ if (request_irq(pdata->irq, ds1553_rtc_interrupt, IRQF_SHARED,
pdev->name, pdev) < 0) {
dev_warn(&pdev->dev, "interrupt not available.\n");
pdata->irq = -1;
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index ee53863..d6d1c57 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -173,7 +173,7 @@
goto out_no_remap;
}
- if (request_irq(adev->irq[0], pl031_interrupt, SA_INTERRUPT,
+ if (request_irq(adev->irq[0], pl031_interrupt, IRQF_DISABLED,
"rtc-pl031", ldata->rtc)) {
ret = -EIO;
goto out_no_irq;
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
new file mode 100644
index 0000000..d6d1bff
--- /dev/null
+++ b/drivers/rtc/rtc-s3c.c
@@ -0,0 +1,607 @@
+/* drivers/rtc/rtc-s3c.c
+ *
+ * Copyright (c) 2004,2006 Simtec Electronics
+ * Ben Dooks, <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410/S3C2440/S3C24XX Internal RTC Driver
+*/
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/rtc.h>
+
+#include <asm/mach/time.h>
+
+#include <asm/arch/regs-rtc.h>
+
+/* I have yet to find an S3C implementation with more than one
+ * of these rtc blocks in */
+
+static struct resource *s3c_rtc_mem;
+
+static void __iomem *s3c_rtc_base;
+static int s3c_rtc_alarmno = NO_IRQ;
+static int s3c_rtc_tickno = NO_IRQ;
+static int s3c_rtc_freq = 1;
+
+static DEFINE_SPINLOCK(s3c_rtc_pie_lock);
+static unsigned int tick_count;
+
+/* IRQ Handlers */
+
+static irqreturn_t s3c_rtc_alarmirq(int irq, void *id, struct pt_regs *r)
+{
+ struct rtc_device *rdev = id;
+
+ rtc_update_irq(&rdev->class_dev, 1, RTC_AF | RTC_IRQF);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t s3c_rtc_tickirq(int irq, void *id, struct pt_regs *r)
+{
+ struct rtc_device *rdev = id;
+
+ rtc_update_irq(&rdev->class_dev, tick_count++, RTC_PF | RTC_IRQF);
+ return IRQ_HANDLED;
+}
+
+/* Update control registers */
+static void s3c_rtc_setaie(int to)
+{
+ unsigned int tmp;
+
+ pr_debug("%s: aie=%d\n", __FUNCTION__, to);
+
+ tmp = readb(S3C2410_RTCALM) & ~S3C2410_RTCALM_ALMEN;
+
+ if (to)
+ tmp |= S3C2410_RTCALM_ALMEN;
+
+ writeb(tmp, S3C2410_RTCALM);
+}
+
+static void s3c_rtc_setpie(int to)
+{
+ unsigned int tmp;
+
+ pr_debug("%s: pie=%d\n", __FUNCTION__, to);
+
+ spin_lock_irq(&s3c_rtc_pie_lock);
+ tmp = readb(S3C2410_TICNT) & ~S3C2410_TICNT_ENABLE;
+
+ if (to)
+ tmp |= S3C2410_TICNT_ENABLE;
+
+ writeb(tmp, S3C2410_TICNT);
+ spin_unlock_irq(&s3c_rtc_pie_lock);
+}
+
+static void s3c_rtc_setfreq(int freq)
+{
+ unsigned int tmp;
+
+ spin_lock_irq(&s3c_rtc_pie_lock);
+ tmp = readb(S3C2410_TICNT) & S3C2410_TICNT_ENABLE;
+
+ s3c_rtc_freq = freq;
+
+ tmp |= (128 / freq)-1;
+
+ writeb(tmp, S3C2410_TICNT);
+ spin_unlock_irq(&s3c_rtc_pie_lock);
+}
+
+/* Time read/write */
+
+static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
+{
+ unsigned int have_retried = 0;
+
+ retry_get_time:
+ rtc_tm->tm_min = readb(S3C2410_RTCMIN);
+ rtc_tm->tm_hour = readb(S3C2410_RTCHOUR);
+ rtc_tm->tm_mday = readb(S3C2410_RTCDATE);
+ rtc_tm->tm_mon = readb(S3C2410_RTCMON);
+ rtc_tm->tm_year = readb(S3C2410_RTCYEAR);
+ rtc_tm->tm_sec = readb(S3C2410_RTCSEC);
+
+ /* the only way to work out wether the system was mid-update
+ * when we read it is to check the second counter, and if it
+ * is zero, then we re-try the entire read
+ */
+
+ if (rtc_tm->tm_sec == 0 && !have_retried) {
+ have_retried = 1;
+ goto retry_get_time;
+ }
+
+ pr_debug("read time %02x.%02x.%02x %02x/%02x/%02x\n",
+ rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
+ rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
+
+ BCD_TO_BIN(rtc_tm->tm_sec);
+ BCD_TO_BIN(rtc_tm->tm_min);
+ BCD_TO_BIN(rtc_tm->tm_hour);
+ BCD_TO_BIN(rtc_tm->tm_mday);
+ BCD_TO_BIN(rtc_tm->tm_mon);
+ BCD_TO_BIN(rtc_tm->tm_year);
+
+ rtc_tm->tm_year += 100;
+ rtc_tm->tm_mon -= 1;
+
+ return 0;
+}
+
+static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+ /* the rtc gets round the y2k problem by just not supporting it */
+
+ if (tm->tm_year < 100)
+ return -EINVAL;
+
+ writeb(BIN2BCD(tm->tm_sec), S3C2410_RTCSEC);
+ writeb(BIN2BCD(tm->tm_min), S3C2410_RTCMIN);
+ writeb(BIN2BCD(tm->tm_hour), S3C2410_RTCHOUR);
+ writeb(BIN2BCD(tm->tm_mday), S3C2410_RTCDATE);
+ writeb(BIN2BCD(tm->tm_mon + 1), S3C2410_RTCMON);
+ writeb(BIN2BCD(tm->tm_year - 100), S3C2410_RTCYEAR);
+
+ return 0;
+}
+
+static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct rtc_time *alm_tm = &alrm->time;
+ unsigned int alm_en;
+
+ alm_tm->tm_sec = readb(S3C2410_ALMSEC);
+ alm_tm->tm_min = readb(S3C2410_ALMMIN);
+ alm_tm->tm_hour = readb(S3C2410_ALMHOUR);
+ alm_tm->tm_mon = readb(S3C2410_ALMMON);
+ alm_tm->tm_mday = readb(S3C2410_ALMDATE);
+ alm_tm->tm_year = readb(S3C2410_ALMYEAR);
+
+ alm_en = readb(S3C2410_RTCALM);
+
+ pr_debug("read alarm %02x %02x.%02x.%02x %02x/%02x/%02x\n",
+ alm_en,
+ alm_tm->tm_year, alm_tm->tm_mon, alm_tm->tm_mday,
+ alm_tm->tm_hour, alm_tm->tm_min, alm_tm->tm_sec);
+
+
+ /* decode the alarm enable field */
+
+ if (alm_en & S3C2410_RTCALM_SECEN)
+ BCD_TO_BIN(alm_tm->tm_sec);
+ else
+ alm_tm->tm_sec = 0xff;
+
+ if (alm_en & S3C2410_RTCALM_MINEN)
+ BCD_TO_BIN(alm_tm->tm_min);
+ else
+ alm_tm->tm_min = 0xff;
+
+ if (alm_en & S3C2410_RTCALM_HOUREN)
+ BCD_TO_BIN(alm_tm->tm_hour);
+ else
+ alm_tm->tm_hour = 0xff;
+
+ if (alm_en & S3C2410_RTCALM_DAYEN)
+ BCD_TO_BIN(alm_tm->tm_mday);
+ else
+ alm_tm->tm_mday = 0xff;
+
+ if (alm_en & S3C2410_RTCALM_MONEN) {
+ BCD_TO_BIN(alm_tm->tm_mon);
+ alm_tm->tm_mon -= 1;
+ } else {
+ alm_tm->tm_mon = 0xff;
+ }
+
+ if (alm_en & S3C2410_RTCALM_YEAREN)
+ BCD_TO_BIN(alm_tm->tm_year);
+ else
+ alm_tm->tm_year = 0xffff;
+
+ return 0;
+}
+
+static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct rtc_time *tm = &alrm->time;
+ unsigned int alrm_en;
+
+ pr_debug("s3c_rtc_setalarm: %d, %02x/%02x/%02x %02x.%02x.%02x\n",
+ alrm->enabled,
+ tm->tm_mday & 0xff, tm->tm_mon & 0xff, tm->tm_year & 0xff,
+ tm->tm_hour & 0xff, tm->tm_min & 0xff, tm->tm_sec);
+
+
+ alrm_en = readb(S3C2410_RTCALM) & S3C2410_RTCALM_ALMEN;
+ writeb(0x00, S3C2410_RTCALM);
+
+ if (tm->tm_sec < 60 && tm->tm_sec >= 0) {
+ alrm_en |= S3C2410_RTCALM_SECEN;
+ writeb(BIN2BCD(tm->tm_sec), S3C2410_ALMSEC);
+ }
+
+ if (tm->tm_min < 60 && tm->tm_min >= 0) {
+ alrm_en |= S3C2410_RTCALM_MINEN;
+ writeb(BIN2BCD(tm->tm_min), S3C2410_ALMMIN);
+ }
+
+ if (tm->tm_hour < 24 && tm->tm_hour >= 0) {
+ alrm_en |= S3C2410_RTCALM_HOUREN;
+ writeb(BIN2BCD(tm->tm_hour), S3C2410_ALMHOUR);
+ }
+
+ pr_debug("setting S3C2410_RTCALM to %08x\n", alrm_en);
+
+ writeb(alrm_en, S3C2410_RTCALM);
+
+ if (0) {
+ alrm_en = readb(S3C2410_RTCALM);
+ alrm_en &= ~S3C2410_RTCALM_ALMEN;
+ writeb(alrm_en, S3C2410_RTCALM);
+ disable_irq_wake(s3c_rtc_alarmno);
+ }
+
+ if (alrm->enabled)
+ enable_irq_wake(s3c_rtc_alarmno);
+ else
+ disable_irq_wake(s3c_rtc_alarmno);
+
+ return 0;
+}
+
+static int s3c_rtc_ioctl(struct device *dev,
+ unsigned int cmd, unsigned long arg)
+{
+ unsigned int ret = -ENOIOCTLCMD;
+
+ switch (cmd) {
+ case RTC_AIE_OFF:
+ case RTC_AIE_ON:
+ s3c_rtc_setaie((cmd == RTC_AIE_ON) ? 1 : 0);
+ ret = 0;
+ break;
+
+ case RTC_PIE_OFF:
+ case RTC_PIE_ON:
+ tick_count = 0;
+ s3c_rtc_setpie((cmd == RTC_PIE_ON) ? 1 : 0);
+ ret = 0;
+ break;
+
+ case RTC_IRQP_READ:
+ ret = put_user(s3c_rtc_freq, (unsigned long __user *)arg);
+ break;
+
+ case RTC_IRQP_SET:
+ /* check for power of 2 */
+
+ if ((arg & (arg-1)) != 0 || arg < 1) {
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ pr_debug("s3c2410_rtc: setting frequency %ld\n", arg);
+
+ s3c_rtc_setfreq(arg);
+ ret = 0;
+ break;
+
+ case RTC_UIE_ON:
+ case RTC_UIE_OFF:
+ ret = -EINVAL;
+ }
+
+ exit:
+ return ret;
+}
+
+static int s3c_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+ unsigned int rtcalm = readb(S3C2410_RTCALM);
+ unsigned int ticnt = readb (S3C2410_TICNT);
+
+ seq_printf(seq, "alarm_IRQ\t: %s\n",
+ (rtcalm & S3C2410_RTCALM_ALMEN) ? "yes" : "no" );
+
+ seq_printf(seq, "periodic_IRQ\t: %s\n",
+ (ticnt & S3C2410_TICNT_ENABLE) ? "yes" : "no" );
+
+ seq_printf(seq, "periodic_freq\t: %d\n", s3c_rtc_freq);
+
+ return 0;
+}
+
+static int s3c_rtc_open(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = request_irq(s3c_rtc_alarmno, s3c_rtc_alarmirq,
+ SA_INTERRUPT, "s3c2410-rtc alarm", rtc_dev);
+
+ if (ret) {
+ dev_err(dev, "IRQ%d error %d\n", s3c_rtc_alarmno, ret);
+ return ret;
+ }
+
+ ret = request_irq(s3c_rtc_tickno, s3c_rtc_tickirq,
+ SA_INTERRUPT, "s3c2410-rtc tick", rtc_dev);
+
+ if (ret) {
+ dev_err(dev, "IRQ%d error %d\n", s3c_rtc_tickno, ret);
+ goto tick_err;
+ }
+
+ return ret;
+
+ tick_err:
+ free_irq(s3c_rtc_alarmno, rtc_dev);
+ return ret;
+}
+
+static void s3c_rtc_release(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
+
+ /* do not clear AIE here, it may be needed for wake */
+
+ s3c_rtc_setpie(0);
+ free_irq(s3c_rtc_alarmno, rtc_dev);
+ free_irq(s3c_rtc_tickno, rtc_dev);
+}
+
+static struct rtc_class_ops s3c_rtcops = {
+ .open = s3c_rtc_open,
+ .release = s3c_rtc_release,
+ .ioctl = s3c_rtc_ioctl,
+ .read_time = s3c_rtc_gettime,
+ .set_time = s3c_rtc_settime,
+ .read_alarm = s3c_rtc_getalarm,
+ .set_alarm = s3c_rtc_setalarm,
+ .proc = s3c_rtc_proc,
+};
+
+static void s3c_rtc_enable(struct platform_device *pdev, int en)
+{
+ unsigned int tmp;
+
+ if (s3c_rtc_base == NULL)
+ return;
+
+ if (!en) {
+ tmp = readb(S3C2410_RTCCON);
+ writeb(tmp & ~S3C2410_RTCCON_RTCEN, S3C2410_RTCCON);
+
+ tmp = readb(S3C2410_TICNT);
+ writeb(tmp & ~S3C2410_TICNT_ENABLE, S3C2410_TICNT);
+ } else {
+ /* re-enable the device, and check it is ok */
+
+ if ((readb(S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0){
+ dev_info(&pdev->dev, "rtc disabled, re-enabling\n");
+
+ tmp = readb(S3C2410_RTCCON);
+ writeb(tmp | S3C2410_RTCCON_RTCEN , S3C2410_RTCCON);
+ }
+
+ if ((readb(S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)){
+ dev_info(&pdev->dev, "removing RTCCON_CNTSEL\n");
+
+ tmp = readb(S3C2410_RTCCON);
+ writeb(tmp& ~S3C2410_RTCCON_CNTSEL , S3C2410_RTCCON);
+ }
+
+ if ((readb(S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)){
+ dev_info(&pdev->dev, "removing RTCCON_CLKRST\n");
+
+ tmp = readb(S3C2410_RTCCON);
+ writeb(tmp & ~S3C2410_RTCCON_CLKRST, S3C2410_RTCCON);
+ }
+ }
+}
+
+static int s3c_rtc_remove(struct platform_device *dev)
+{
+ struct rtc_device *rtc = platform_get_drvdata(dev);
+
+ platform_set_drvdata(dev, NULL);
+ rtc_device_unregister(rtc);
+
+ s3c_rtc_setpie(0);
+ s3c_rtc_setaie(0);
+
+ iounmap(s3c_rtc_base);
+ release_resource(s3c_rtc_mem);
+ kfree(s3c_rtc_mem);
+
+ return 0;
+}
+
+static int s3c_rtc_probe(struct platform_device *pdev)
+{
+ struct rtc_device *rtc;
+ struct resource *res;
+ int ret;
+
+ pr_debug("%s: probe=%p\n", __FUNCTION__, pdev);
+
+ /* find the IRQs */
+
+ s3c_rtc_tickno = platform_get_irq(pdev, 1);
+ if (s3c_rtc_tickno < 0) {
+ dev_err(&pdev->dev, "no irq for rtc tick\n");
+ return -ENOENT;
+ }
+
+ s3c_rtc_alarmno = platform_get_irq(pdev, 0);
+ if (s3c_rtc_alarmno < 0) {
+ dev_err(&pdev->dev, "no irq for alarm\n");
+ return -ENOENT;
+ }
+
+ pr_debug("s3c2410_rtc: tick irq %d, alarm irq %d\n",
+ s3c_rtc_tickno, s3c_rtc_alarmno);
+
+ /* get the memory region */
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "failed to get memory region resource\n");
+ return -ENOENT;
+ }
+
+ s3c_rtc_mem = request_mem_region(res->start,
+ res->end-res->start+1,
+ pdev->name);
+
+ if (s3c_rtc_mem == NULL) {
+ dev_err(&pdev->dev, "failed to reserve memory region\n");
+ ret = -ENOENT;
+ goto err_nores;
+ }
+
+ s3c_rtc_base = ioremap(res->start, res->end - res->start + 1);
+ if (s3c_rtc_base == NULL) {
+ dev_err(&pdev->dev, "failed ioremap()\n");
+ ret = -EINVAL;
+ goto err_nomap;
+ }
+
+ /* check to see if everything is setup correctly */
+
+ s3c_rtc_enable(pdev, 1);
+
+ pr_debug("s3c2410_rtc: RTCCON=%02x\n", readb(S3C2410_RTCCON));
+
+ s3c_rtc_setfreq(s3c_rtc_freq);
+
+ /* register RTC and exit */
+
+ rtc = rtc_device_register("s3c", &pdev->dev, &s3c_rtcops,
+ THIS_MODULE);
+
+ if (IS_ERR(rtc)) {
+ dev_err(&pdev->dev, "cannot attach rtc\n");
+ ret = PTR_ERR(rtc);
+ goto err_nortc;
+ }
+
+ rtc->max_user_freq = 128;
+
+ platform_set_drvdata(pdev, rtc);
+ return 0;
+
+ err_nortc:
+ s3c_rtc_enable(pdev, 0);
+ iounmap(s3c_rtc_base);
+
+ err_nomap:
+ release_resource(s3c_rtc_mem);
+
+ err_nores:
+ return ret;
+}
+
+#ifdef CONFIG_PM
+
+/* RTC Power management control */
+
+static struct timespec s3c_rtc_delta;
+
+static int ticnt_save;
+
+static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct rtc_time tm;
+ struct timespec time;
+
+ time.tv_nsec = 0;
+
+ /* save TICNT for anyone using periodic interrupts */
+
+ ticnt_save = readb(S3C2410_TICNT);
+
+ /* calculate time delta for suspend */
+
+ s3c_rtc_gettime(&pdev->dev, &tm);
+ rtc_tm_to_time(&tm, &time.tv_sec);
+ save_time_delta(&s3c_rtc_delta, &time);
+ s3c_rtc_enable(pdev, 0);
+
+ return 0;
+}
+
+static int s3c_rtc_resume(struct platform_device *pdev)
+{
+ struct rtc_time tm;
+ struct timespec time;
+
+ time.tv_nsec = 0;
+
+ s3c_rtc_enable(pdev, 1);
+ s3c_rtc_gettime(&pdev->dev, &tm);
+ rtc_tm_to_time(&tm, &time.tv_sec);
+ restore_time_delta(&s3c_rtc_delta, &time);
+
+ writeb(ticnt_save, S3C2410_TICNT);
+ return 0;
+}
+#else
+#define s3c_rtc_suspend NULL
+#define s3c_rtc_resume NULL
+#endif
+
+static struct platform_driver s3c2410_rtcdrv = {
+ .probe = s3c_rtc_probe,
+ .remove = s3c_rtc_remove,
+ .suspend = s3c_rtc_suspend,
+ .resume = s3c_rtc_resume,
+ .driver = {
+ .name = "s3c2410-rtc",
+ .owner = THIS_MODULE,
+ },
+};
+
+static char __initdata banner[] = "S3C24XX RTC, (c) 2004,2006 Simtec Electronics\n";
+
+static int __init s3c_rtc_init(void)
+{
+ printk(banner);
+ return platform_driver_register(&s3c2410_rtcdrv);
+}
+
+static void __exit s3c_rtc_exit(void)
+{
+ platform_driver_unregister(&s3c2410_rtcdrv);
+}
+
+module_init(s3c_rtc_init);
+module_exit(s3c_rtc_exit);
+
+MODULE_DESCRIPTION("Samsung S3C RTC Driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 9cd1cb3..ee4b61e 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -157,19 +157,19 @@
{
int ret;
- ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, SA_INTERRUPT,
+ ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED,
"rtc 1Hz", dev);
if (ret) {
dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz);
goto fail_ui;
}
- ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, SA_INTERRUPT,
+ ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED,
"rtc Alrm", dev);
if (ret) {
dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm);
goto fail_ai;
}
- ret = request_irq(IRQ_OST1, timer1_interrupt, SA_INTERRUPT,
+ ret = request_irq(IRQ_OST1, timer1_interrupt, IRQF_DISABLED,
"rtc timer", dev);
if (ret) {
dev_err(dev, "IRQ %d already in use.\n", IRQ_OST1);
diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c
index 4b9291d..bb6d5ff2 100644
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@@ -345,11 +345,11 @@
spin_unlock_irq(&rtc_lock);
irq = ELAPSEDTIME_IRQ;
- retval = request_irq(irq, elapsedtime_interrupt, SA_INTERRUPT,
+ retval = request_irq(irq, elapsedtime_interrupt, IRQF_DISABLED,
"elapsed_time", pdev);
if (retval == 0) {
irq = RTCLONG1_IRQ;
- retval = request_irq(irq, rtclong1_interrupt, SA_INTERRUPT,
+ retval = request_irq(irq, rtclong1_interrupt, IRQF_DISABLED,
"rtclong1", pdev);
}
diff --git a/drivers/sbus/char/aurora.c b/drivers/sbus/char/aurora.c
index 015db40..4fdb2c9 100644
--- a/drivers/sbus/char/aurora.c
+++ b/drivers/sbus/char/aurora.c
@@ -337,19 +337,19 @@
printk("intr pri %d\n", grrr);
#endif
if ((bp->irq=irqs[bn]) && valid_irq(bp->irq) &&
- !request_irq(bp->irq|0x30, aurora_interrupt, SA_SHIRQ, "sio16", bp)) {
+ !request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, "sio16", bp)) {
free_irq(bp->irq|0x30, bp);
} else
if ((bp->irq=prom_getint(sdev->prom_node, "bintr")) && valid_irq(bp->irq) &&
- !request_irq(bp->irq|0x30, aurora_interrupt, SA_SHIRQ, "sio16", bp)) {
+ !request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, "sio16", bp)) {
free_irq(bp->irq|0x30, bp);
} else
if ((bp->irq=prom_getint(sdev->prom_node, "intr")) && valid_irq(bp->irq) &&
- !request_irq(bp->irq|0x30, aurora_interrupt, SA_SHIRQ, "sio16", bp)) {
+ !request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, "sio16", bp)) {
free_irq(bp->irq|0x30, bp);
} else
for(grrr=0;grrr<TYPE_1_IRQS;grrr++) {
- if ((bp->irq=type_1_irq[grrr])&&!request_irq(bp->irq|0x30, aurora_interrupt, SA_SHIRQ, "sio16", bp)) {
+ if ((bp->irq=type_1_irq[grrr])&&!request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, "sio16", bp)) {
free_irq(bp->irq|0x30, bp);
break;
} else {
@@ -909,14 +909,14 @@
#ifdef AURORA_ALLIRQ
int i;
for (i = 0; i < AURORA_ALLIRQ; i++) {
- error = request_irq(allirq[i]|0x30, aurora_interrupt, SA_SHIRQ,
+ error = request_irq(allirq[i]|0x30, aurora_interrupt, IRQF_SHARED,
"sio16", bp);
if (error)
printk(KERN_ERR "IRQ%d request error %d\n",
allirq[i], error);
}
#else
- error = request_irq(bp->irq|0x30, aurora_interrupt, SA_SHIRQ,
+ error = request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED,
"sio16", bp);
if (error) {
printk(KERN_ERR "IRQ request error %d\n", error);
diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c
index 7363437..7186235 100644
--- a/drivers/sbus/char/bbc_i2c.c
+++ b/drivers/sbus/char/bbc_i2c.c
@@ -377,7 +377,7 @@
bp->waiting = 0;
init_waitqueue_head(&bp->wq);
if (request_irq(edev->irqs[0], bbc_i2c_interrupt,
- SA_SHIRQ, "bbc_i2c", bp))
+ IRQF_SHARED, "bbc_i2c", bp))
goto fail;
bp->index = index;
diff --git a/drivers/sbus/char/cpwatchdog.c b/drivers/sbus/char/cpwatchdog.c
index 21737b7..836a58b 100644
--- a/drivers/sbus/char/cpwatchdog.c
+++ b/drivers/sbus/char/cpwatchdog.c
@@ -301,7 +301,7 @@
{
if (request_irq(wd_dev.irq,
&wd_interrupt,
- SA_SHIRQ,
+ IRQF_SHARED,
WD_OBPNAME,
(void *)wd_dev.regs)) {
printk("%s: Cannot register IRQ %d\n",
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index b003baf..5a9475e 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -2122,7 +2122,7 @@
TW_PARAM_PORTCOUNT, TW_PARAM_PORTCOUNT_LENGTH)));
/* Now setup the interrupt handler */
- retval = request_irq(pdev->irq, twa_interrupt, SA_SHIRQ, "3w-9xxx", tw_dev);
+ retval = request_irq(pdev->irq, twa_interrupt, IRQF_SHARED, "3w-9xxx", tw_dev);
if (retval) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x30, "Error requesting IRQ");
goto out_remove_host;
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index 17dbd4a..f3a5f42 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -2397,7 +2397,7 @@
printk(KERN_WARNING "3w-xxxx: scsi%d: Found a 3ware Storage Controller at 0x%x, IRQ: %d.\n", host->host_no, tw_dev->base_addr, pdev->irq);
/* Now setup the interrupt handler */
- retval = request_irq(pdev->irq, tw_interrupt, SA_SHIRQ, "3w-xxxx", tw_dev);
+ retval = request_irq(pdev->irq, tw_interrupt, IRQF_SHARED, "3w-xxxx", tw_dev);
if (retval) {
printk(KERN_WARNING "3w-xxxx: Error requesting IRQ.");
goto out_remove_host;
diff --git a/drivers/scsi/53c7xx.c b/drivers/scsi/53c7xx.c
index c9bd033..c690c2b 100644
--- a/drivers/scsi/53c7xx.c
+++ b/drivers/scsi/53c7xx.c
@@ -1070,7 +1070,7 @@
NCR53c7x0_driver_init (host);
- if (request_irq(host->irq, NCR53c7x0_intr, SA_SHIRQ, "53c7xx", host))
+ if (request_irq(host->irq, NCR53c7x0_intr, IRQF_SHARED, "53c7xx", host))
{
printk("scsi%d : IRQ%d not free, detaching\n",
host->host_no, host->irq);
@@ -4232,7 +4232,7 @@
* Purpose : handle NCR53c7x0 interrupts for all NCR devices sharing
* the same IRQ line.
*
- * Inputs : Since we're using the SA_INTERRUPT interrupt handler
+ * Inputs : Since we're using the IRQF_DISABLED interrupt handler
* semantics, irq indicates the interrupt which invoked
* this handler.
*
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index 259b47e..16a12a3 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -1844,7 +1844,7 @@
/*
Acquire shared access to the IRQ Channel.
*/
- if (request_irq(HostAdapter->IRQ_Channel, BusLogic_InterruptHandler, SA_SHIRQ, HostAdapter->FullModelName, HostAdapter) < 0) {
+ if (request_irq(HostAdapter->IRQ_Channel, BusLogic_InterruptHandler, IRQF_SHARED, HostAdapter->FullModelName, HostAdapter) < 0) {
BusLogic_Error("UNABLE TO ACQUIRE IRQ CHANNEL %d - DETACHING\n", HostAdapter, HostAdapter->IRQ_Channel);
return false;
}
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 75f2f7a..616810a 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -585,7 +585,7 @@
NCR5380_setup(instance);
for (trying_irqs = i = 0, mask = 1; i < 16; ++i, mask <<= 1)
- if ((mask & possible) && (request_irq(i, &probe_intr, SA_INTERRUPT, "NCR-probe", NULL) == 0))
+ if ((mask & possible) && (request_irq(i, &probe_intr, IRQF_DISABLED, "NCR-probe", NULL) == 0))
trying_irqs |= mask;
timeout = jiffies + (250 * HZ / 1000);
diff --git a/drivers/scsi/NCR_D700.c b/drivers/scsi/NCR_D700.c
index 577e634..a06f547 100644
--- a/drivers/scsi/NCR_D700.c
+++ b/drivers/scsi/NCR_D700.c
@@ -320,7 +320,7 @@
memset(p, '\0', sizeof(*p));
p->dev = dev;
snprintf(p->name, sizeof(p->name), "D700(%s)", dev->bus_id);
- if (request_irq(irq, NCR_D700_intr, SA_SHIRQ, p->name, p)) {
+ if (request_irq(irq, NCR_D700_intr, IRQF_SHARED, p->name, p)) {
printk(KERN_ERR "D700: request_irq failed\n");
kfree(p);
return -EBUSY;
diff --git a/drivers/scsi/NCR_Q720.c b/drivers/scsi/NCR_Q720.c
index 9d18ec9..c39ffbb 100644
--- a/drivers/scsi/NCR_Q720.c
+++ b/drivers/scsi/NCR_Q720.c
@@ -265,7 +265,7 @@
p->irq = irq;
p->siops = siops;
- if (request_irq(irq, NCR_Q720_intr, SA_SHIRQ, "NCR_Q720", p)) {
+ if (request_irq(irq, NCR_Q720_intr, IRQF_SHARED, "NCR_Q720", p)) {
printk(KERN_ERR "NCR_Q720: request irq %d failed\n", irq);
goto out_release;
}
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index 3dce21c..d7e9fab 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -1120,7 +1120,7 @@
shost->sg_tablesize = TOTAL_SG_ENTRY;
/* Initial orc chip */
- error = request_irq(pdev->irq, inia100_intr, SA_SHIRQ,
+ error = request_irq(pdev->irq, inia100_intr, IRQF_SHARED,
"inia100", shost);
if (error < 0) {
printk(KERN_WARNING "inia100: unable to get irq %d\n",
diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c
index 54996ea..fddfa2e 100644
--- a/drivers/scsi/a2091.c
+++ b/drivers/scsi/a2091.c
@@ -208,7 +208,7 @@
regs.SASR = &(DMA(instance)->SASR);
regs.SCMD = &(DMA(instance)->SCMD);
wd33c93_init(instance, regs, dma_setup, dma_stop, WD33C93_FS_8_10);
- request_irq(IRQ_AMIGA_PORTS, a2091_intr, SA_SHIRQ, "A2091 SCSI",
+ request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED, "A2091 SCSI",
instance);
DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN;
num_a2091++;
diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c
index f425d42..ae9ab4b 100644
--- a/drivers/scsi/a3000.c
+++ b/drivers/scsi/a3000.c
@@ -190,7 +190,7 @@
regs.SASR = &(DMA(a3000_host)->SASR);
regs.SCMD = &(DMA(a3000_host)->SCMD);
wd33c93_init(a3000_host, regs, dma_setup, dma_stop, WD33C93_FS_12_15);
- if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, SA_SHIRQ, "A3000 SCSI",
+ if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI",
a3000_intr))
goto fail_irq;
DMA(a3000_host)->CNTR = CNTR_PDMD | CNTR_INTEN;
diff --git a/drivers/scsi/aacraid/rkt.c b/drivers/scsi/aacraid/rkt.c
index 5b52966..458ea89 100644
--- a/drivers/scsi/aacraid/rkt.c
+++ b/drivers/scsi/aacraid/rkt.c
@@ -453,7 +453,7 @@
}
msleep(1);
}
- if (request_irq(dev->scsi_host_ptr->irq, aac_rkt_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev)<0)
+ if (request_irq(dev->scsi_host_ptr->irq, aac_rkt_intr, IRQF_SHARED|IRQF_DISABLED, "aacraid", (void *)dev)<0)
{
printk(KERN_ERR "%s%d: Interrupt unavailable.\n", name, instance);
goto error_iounmap;
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c
index 9dadfb2..035018d 100644
--- a/drivers/scsi/aacraid/rx.c
+++ b/drivers/scsi/aacraid/rx.c
@@ -453,7 +453,7 @@
}
msleep(1);
}
- if (request_irq(dev->scsi_host_ptr->irq, aac_rx_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev)<0)
+ if (request_irq(dev->scsi_host_ptr->irq, aac_rx_intr, IRQF_SHARED|IRQF_DISABLED, "aacraid", (void *)dev)<0)
{
printk(KERN_ERR "%s%d: Interrupt unavailable.\n", name, instance);
goto error_iounmap;
diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c
index 88d400f..cd586cc 100644
--- a/drivers/scsi/aacraid/sa.c
+++ b/drivers/scsi/aacraid/sa.c
@@ -327,7 +327,7 @@
msleep(1);
}
- if (request_irq(dev->scsi_host_ptr->irq, aac_sa_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev ) < 0) {
+ if (request_irq(dev->scsi_host_ptr->irq, aac_sa_intr, IRQF_SHARED|IRQF_DISABLED, "aacraid", (void *)dev ) < 0) {
printk(KERN_WARNING "%s%d: Interrupt unavailable.\n", name, instance);
goto error_iounmap;
}
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 5371364..e32b4ab 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -371,7 +371,7 @@
1.5 (8/8/96):
1. Add support for ABP-940U (PCI Ultra) adapter.
- 2. Add support for IRQ sharing by setting the SA_SHIRQ flag for
+ 2. Add support for IRQ sharing by setting the IRQF_SHARED flag for
request_irq and supplying a dev_id pointer to both request_irq()
and free_irq().
3. In AscSearchIOPortAddr11() restore a call to check_region() which
@@ -504,9 +504,9 @@
3. For v2.1.93 and newer kernels use CONFIG_PCI and new PCI BIOS
access functions.
4. Update board serial number printing.
- 5. Try allocating an IRQ both with and without the SA_INTERRUPT
+ 5. Try allocating an IRQ both with and without the IRQF_DISABLED
flag set to allow IRQ sharing with drivers that do not set
- the SA_INTERRUPT flag. Also display a more descriptive error
+ the IRQF_DISABLED flag. Also display a more descriptive error
message if request_irq() fails.
6. Update to latest Asc and Adv Libraries.
@@ -5202,19 +5202,19 @@
/* Register IRQ Number. */
ASC_DBG1(2, "advansys_detect: request_irq() %d\n", shp->irq);
/*
- * If request_irq() fails with the SA_INTERRUPT flag set,
- * then try again without the SA_INTERRUPT flag set. This
+ * If request_irq() fails with the IRQF_DISABLED flag set,
+ * then try again without the IRQF_DISABLED flag set. This
* allows IRQ sharing to work even with other drivers that
- * do not set the SA_INTERRUPT flag.
+ * do not set the IRQF_DISABLED flag.
*
- * If SA_INTERRUPT is not set, then interrupts are enabled
+ * If IRQF_DISABLED is not set, then interrupts are enabled
* before the driver interrupt function is called.
*/
if (((ret = request_irq(shp->irq, advansys_interrupt,
- SA_INTERRUPT | (share_irq == TRUE ? SA_SHIRQ : 0),
+ IRQF_DISABLED | (share_irq == TRUE ? IRQF_SHARED : 0),
"advansys", boardp)) != 0) &&
((ret = request_irq(shp->irq, advansys_interrupt,
- (share_irq == TRUE ? SA_SHIRQ : 0),
+ (share_irq == TRUE ? IRQF_SHARED : 0),
"advansys", boardp)) != 0))
{
if (ret == -EBUSY) {
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index de80cdf..36e63f8 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -855,7 +855,7 @@
SETPORT(SIMODE0, 0);
SETPORT(SIMODE1, 0);
- if( request_irq(shpnt->irq, swintr, SA_INTERRUPT|SA_SHIRQ, "aha152x", shpnt) ) {
+ if( request_irq(shpnt->irq, swintr, IRQF_DISABLED|IRQF_SHARED, "aha152x", shpnt) ) {
printk(KERN_ERR "aha152x%d: irq %d busy.\n", shpnt->host_no, shpnt->irq);
goto out_host_put;
}
@@ -889,7 +889,7 @@
SETPORT(SSTAT0, 0x7f);
SETPORT(SSTAT1, 0xef);
- if ( request_irq(shpnt->irq, intr, SA_INTERRUPT|SA_SHIRQ, "aha152x", shpnt) ) {
+ if ( request_irq(shpnt->irq, intr, IRQF_DISABLED|IRQF_SHARED, "aha152x", shpnt) ) {
printk(KERN_ERR "aha152x%d: failed to reassign irq %d.\n", shpnt->host_no, shpnt->irq);
goto out_host_put;
}
diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c
index 4b8c6a5..0e4a7eb 100644
--- a/drivers/scsi/aha1740.c
+++ b/drivers/scsi/aha1740.c
@@ -634,7 +634,7 @@
}
DEB(printk("aha1740_probe: enable interrupt channel %d\n",irq_level));
- if (request_irq(irq_level,aha1740_intr_handle,irq_type ? 0 : SA_SHIRQ,
+ if (request_irq(irq_level,aha1740_intr_handle,irq_type ? 0 : IRQF_SHARED,
"aha1740",shpnt)) {
printk(KERN_ERR "aha1740_probe: Unable to allocate IRQ %d.\n",
irq_level);
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index f059467..15f6cd4 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -1371,7 +1371,7 @@
probe_ent->port_ops = ahci_port_info[board_idx].port_ops;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = mmio_base;
probe_ent->private_data = hpriv;
diff --git a/drivers/scsi/aic7xxx/aic7770_osm.c b/drivers/scsi/aic7xxx/aic7770_osm.c
index d754b32..867cbe2 100644
--- a/drivers/scsi/aic7xxx/aic7770_osm.c
+++ b/drivers/scsi/aic7xxx/aic7770_osm.c
@@ -65,7 +65,7 @@
shared = 0;
if ((ahc->flags & AHC_EDGE_INTERRUPT) == 0)
- shared = SA_SHIRQ;
+ shared = IRQF_SHARED;
error = request_irq(irq, ahc_linux_isr, shared, "aic7xxx", ahc);
if (error == 0)
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
index ebbf7e4..50a41ed 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
@@ -342,7 +342,7 @@
int error;
error = request_irq(ahd->dev_softc->irq, ahd_linux_isr,
- SA_SHIRQ, "aic79xx", ahd);
+ IRQF_SHARED, "aic79xx", ahd);
if (!error)
ahd->platform_data->irq = ahd->dev_softc->irq;
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
index 0c9c2f4..7e42f07 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
@@ -375,7 +375,7 @@
int error;
error = request_irq(ahc->dev_softc->irq, ahc_linux_isr,
- SA_SHIRQ, "aic7xxx", ahc);
+ IRQF_SHARED, "aic7xxx", ahc);
if (error == 0)
ahc->platform_data->irq = ahc->dev_softc->irq;
diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c
index 5dba1c6..3f85b5e 100644
--- a/drivers/scsi/aic7xxx_old.c
+++ b/drivers/scsi/aic7xxx_old.c
@@ -8322,11 +8322,11 @@
}
else
{
- result = (request_irq(p->irq, do_aic7xxx_isr, SA_SHIRQ,
+ result = (request_irq(p->irq, do_aic7xxx_isr, IRQF_SHARED,
"aic7xxx", p));
if (result < 0)
{
- result = (request_irq(p->irq, do_aic7xxx_isr, SA_INTERRUPT | SA_SHIRQ,
+ result = (request_irq(p->irq, do_aic7xxx_isr, IRQF_DISABLED | IRQF_SHARED,
"aic7xxx", p));
}
}
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index 1b9900b..7621e3f 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -3030,7 +3030,7 @@
if (!request_region(host->io_port, 2048, "acornscsi(ram)"))
goto err_5;
- ret = request_irq(host->irq, acornscsi_intr, SA_INTERRUPT, "acornscsi", ashost);
+ ret = request_irq(host->irq, acornscsi_intr, IRQF_DISABLED, "acornscsi", ashost);
if (ret) {
printk(KERN_CRIT "scsi%d: IRQ%d not free: %d\n",
host->host_no, ashost->scsi.irq, ret);
diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c
index e6c9491..3bdfc36 100644
--- a/drivers/scsi/arm/cumana_1.c
+++ b/drivers/scsi/arm/cumana_1.c
@@ -277,7 +277,7 @@
((struct NCR5380_hostdata *)host->hostdata)->ctrl = 0;
outb(0x00, host->io_port - 577);
- ret = request_irq(host->irq, cumanascsi_intr, SA_INTERRUPT,
+ ret = request_irq(host->irq, cumanascsi_intr, IRQF_DISABLED,
"CumanaSCSI-1", host);
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c
index fad2109..719af0d 100644
--- a/drivers/scsi/arm/cumana_2.c
+++ b/drivers/scsi/arm/cumana_2.c
@@ -460,7 +460,7 @@
goto out_free;
ret = request_irq(ec->irq, cumanascsi_2_intr,
- SA_INTERRUPT, "cumanascsi2", info);
+ IRQF_DISABLED, "cumanascsi2", info);
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
host->host_no, ec->irq, ret);
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c
index 3d69f6c..b2c346a 100644
--- a/drivers/scsi/arm/powertec.c
+++ b/drivers/scsi/arm/powertec.c
@@ -373,7 +373,7 @@
goto out_free;
ret = request_irq(ec->irq, powertecscsi_intr,
- SA_INTERRUPT, "powertec", info);
+ IRQF_DISABLED, "powertec", info);
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
host->host_no, ec->irq, ret);
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index 3ee4d4d..412f830 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -2751,7 +2751,7 @@
goto unregister;
}
- if (request_irq(pdev->irq, atp870u_intr_handle, SA_SHIRQ, "atp880i", shpnt)) {
+ if (request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED, "atp880i", shpnt)) {
printk(KERN_ERR "Unable to allocate IRQ%d for Acard controller.\n", pdev->irq);
goto free_tables;
}
@@ -2822,7 +2822,7 @@
#ifdef ED_DBGP
printk("request_irq() shpnt %p hostdata %p\n", shpnt, p);
#endif
- if (request_irq(pdev->irq, atp870u_intr_handle, SA_SHIRQ, "atp870u", shpnt)) {
+ if (request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED, "atp870u", shpnt)) {
printk(KERN_ERR "Unable to allocate IRQ for Acard controller.\n");
goto free_tables;
}
@@ -3004,7 +3004,7 @@
if (atp870u_init_tables(shpnt) < 0)
goto unregister;
- if (request_irq(pdev->irq, atp870u_intr_handle, SA_SHIRQ, "atp870i", shpnt)) {
+ if (request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED, "atp870i", shpnt)) {
printk(KERN_ERR "Unable to allocate IRQ%d for Acard controller.\n", pdev->irq);
goto free_tables;
}
diff --git a/drivers/scsi/blz1230.c b/drivers/scsi/blz1230.c
index 3867ac2..329a8f2 100644
--- a/drivers/scsi/blz1230.c
+++ b/drivers/scsi/blz1230.c
@@ -172,7 +172,7 @@
esp->irq = IRQ_AMIGA_PORTS;
esp->slot = board+REAL_BLZ1230_ESP_ADDR;
- if (request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ,
+ if (request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
"Blizzard 1230 SCSI IV", esp->ehost))
goto err_out;
diff --git a/drivers/scsi/blz2060.c b/drivers/scsi/blz2060.c
index 4ebe69e..b6c137b 100644
--- a/drivers/scsi/blz2060.c
+++ b/drivers/scsi/blz2060.c
@@ -146,7 +146,7 @@
esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
esp->irq = IRQ_AMIGA_PORTS;
- request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ,
+ request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
"Blizzard 2060 SCSI", esp->ehost);
/* Figure out our scsi ID on the bus */
diff --git a/drivers/scsi/cyberstorm.c b/drivers/scsi/cyberstorm.c
index a4a4fac..7c7cfb5 100644
--- a/drivers/scsi/cyberstorm.c
+++ b/drivers/scsi/cyberstorm.c
@@ -172,7 +172,7 @@
esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
esp->irq = IRQ_AMIGA_PORTS;
- request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ,
+ request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
"CyberStorm SCSI", esp->ehost);
/* Figure out our scsi ID on the bus */
/* The DMA cond flag contains a hardcoded jumper bit
diff --git a/drivers/scsi/cyberstormII.c b/drivers/scsi/cyberstormII.c
index 3a803d7..d88cb9c 100644
--- a/drivers/scsi/cyberstormII.c
+++ b/drivers/scsi/cyberstormII.c
@@ -153,7 +153,7 @@
esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
esp->irq = IRQ_AMIGA_PORTS;
- request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ,
+ request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
"CyberStorm SCSI Mk II", esp->ehost);
/* Figure out our scsi ID on the bus */
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 58b0748..ff2b179 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -4562,7 +4562,7 @@
acb->io_port_base = io_port;
acb->io_port_len = io_port_len;
- if (request_irq(irq, dc395x_interrupt, SA_SHIRQ, DC395X_NAME, acb)) {
+ if (request_irq(irq, dc395x_interrupt, IRQF_SHARED, DC395X_NAME, acb)) {
/* release the region we just claimed */
dprintkl(KERN_INFO, "Failed to register IRQ\n");
goto failed;
diff --git a/drivers/scsi/dec_esp.c b/drivers/scsi/dec_esp.c
index a35ee43..eb32062 100644
--- a/drivers/scsi/dec_esp.c
+++ b/drivers/scsi/dec_esp.c
@@ -202,19 +202,19 @@
esp_initialize(esp);
- if (request_irq(esp->irq, esp_intr, SA_INTERRUPT,
+ if (request_irq(esp->irq, esp_intr, IRQF_DISABLED,
"ncr53c94", esp->ehost))
goto err_dealloc;
if (request_irq(dec_interrupt[DEC_IRQ_ASC_MERR],
- scsi_dma_merr_int, SA_INTERRUPT,
+ scsi_dma_merr_int, IRQF_DISABLED,
"ncr53c94 error", esp->ehost))
goto err_free_irq;
if (request_irq(dec_interrupt[DEC_IRQ_ASC_ERR],
- scsi_dma_err_int, SA_INTERRUPT,
+ scsi_dma_err_int, IRQF_DISABLED,
"ncr53c94 overrun", esp->ehost))
goto err_free_irq_merr;
if (request_irq(dec_interrupt[DEC_IRQ_ASC_DMA],
- scsi_dma_int, SA_INTERRUPT,
+ scsi_dma_int, IRQF_DISABLED,
"ncr53c94 dma", esp->ehost))
goto err_free_irq_err;
@@ -276,7 +276,7 @@
esp->dma_mmu_release_scsi_sgl = 0;
esp->dma_advance_sg = 0;
- if (request_irq(esp->irq, esp_intr, SA_INTERRUPT,
+ if (request_irq(esp->irq, esp_intr, IRQF_DISABLED,
"PMAZ_AA", esp->ehost)) {
esp_deallocate(esp);
release_tc_card(slot);
diff --git a/drivers/scsi/dmx3191d.c b/drivers/scsi/dmx3191d.c
index 38e4010..879a266 100644
--- a/drivers/scsi/dmx3191d.c
+++ b/drivers/scsi/dmx3191d.c
@@ -94,7 +94,7 @@
NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
- if (request_irq(pdev->irq, NCR5380_intr, SA_SHIRQ,
+ if (request_irq(pdev->irq, NCR5380_intr, IRQF_SHARED,
DMX3191D_DRIVER_NAME, shost)) {
/*
* Steam powered scsi controllers run without an IRQ anyway
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index b1b704a..e133733 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -1009,7 +1009,7 @@
printk(KERN_INFO" BAR1 %p - size= %x\n",msg_addr_virt,hba_map1_area_size);
}
- if (request_irq (pDev->irq, adpt_isr, SA_SHIRQ, pHba->name, pHba)) {
+ if (request_irq (pDev->irq, adpt_isr, IRQF_SHARED, pHba->name, pHba)) {
printk(KERN_ERR"%s: Couldn't register IRQ %d\n", pHba->name, pDev->irq);
adpt_i2o_delete_hba(pHba);
return -EINVAL;
diff --git a/drivers/scsi/dtc.c b/drivers/scsi/dtc.c
index c5108c8..0d5713d 100644
--- a/drivers/scsi/dtc.c
+++ b/drivers/scsi/dtc.c
@@ -280,7 +280,7 @@
/* With interrupts enabled, it will sometimes hang when doing heavy
* reads. So better not enable them until I finger it out. */
if (instance->irq != SCSI_IRQ_NONE)
- if (request_irq(instance->irq, dtc_intr, SA_INTERRUPT, "dtc", instance)) {
+ if (request_irq(instance->irq, dtc_intr, IRQF_DISABLED, "dtc", instance)) {
printk(KERN_ERR "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
instance->irq = SCSI_IRQ_NONE;
}
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index 67c4194..a5ff43b 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -1221,7 +1221,7 @@
/* Board detected, allocate its IRQ */
if (request_irq(irq, do_interrupt_handler,
- SA_INTERRUPT | ((subversion == ESA) ? SA_SHIRQ : 0),
+ IRQF_DISABLED | ((subversion == ESA) ? IRQF_SHARED : 0),
driver_name, (void *)&sha[j])) {
printk("%s: unable to allocate IRQ %u, detaching.\n", name,
irq);
diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c
index d8c9ec2..771b019 100644
--- a/drivers/scsi/eata_pio.c
+++ b/drivers/scsi/eata_pio.c
@@ -731,7 +731,7 @@
return 0;
if (!reg_IRQ[gc->IRQ]) { /* Interrupt already registered ? */
- if (!request_irq(gc->IRQ, do_eata_pio_int_handler, SA_INTERRUPT, "EATA-PIO", sh)) {
+ if (!request_irq(gc->IRQ, do_eata_pio_int_handler, IRQF_DISABLED, "EATA-PIO", sh)) {
reg_IRQ[gc->IRQ]++;
if (!gc->IRQ_TR)
reg_IRQL[gc->IRQ] = 1; /* IRQ is edge triggered */
@@ -965,7 +965,7 @@
for (i = 0; i <= MAXIRQ; i++)
if (reg_IRQ[i])
- request_irq(i, do_eata_pio_int_handler, SA_INTERRUPT, "EATA-PIO", NULL);
+ request_irq(i, do_eata_pio_int_handler, IRQF_DISABLED, "EATA-PIO", NULL);
HBA_ptr = first_HBA;
diff --git a/drivers/scsi/esp.c b/drivers/scsi/esp.c
index 36c50b6..10573c2 100644
--- a/drivers/scsi/esp.c
+++ b/drivers/scsi/esp.c
@@ -778,7 +778,7 @@
* sanely maintain.
*/
if (request_irq(esp->ehost->irq, esp_intr,
- SA_SHIRQ, "ESP SCSI", esp)) {
+ IRQF_SHARED, "ESP SCSI", esp)) {
printk("esp%d: Cannot acquire irq line\n",
esp->esp_id);
return -1;
diff --git a/drivers/scsi/fastlane.c b/drivers/scsi/fastlane.c
index 8ae9c40..2a1c5c2 100644
--- a/drivers/scsi/fastlane.c
+++ b/drivers/scsi/fastlane.c
@@ -210,7 +210,7 @@
esp->irq = IRQ_AMIGA_PORTS;
esp->slot = board+FASTLANE_ESP_ADDR;
- if (request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ,
+ if (request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
"Fastlane SCSI", esp->ehost)) {
printk(KERN_WARNING "Fastlane: Could not get IRQ%d, aborting.\n", IRQ_AMIGA_PORTS);
goto err_unmap;
diff --git a/drivers/scsi/fd_mcs.c b/drivers/scsi/fd_mcs.c
index 70a1606..dde3edf 100644
--- a/drivers/scsi/fd_mcs.c
+++ b/drivers/scsi/fd_mcs.c
@@ -400,7 +400,7 @@
mca_set_adapter_name(slot - 1, fd_mcs_adapters[loop].name);
/* check irq/region */
- if (request_irq(irq, fd_mcs_intr, SA_SHIRQ, "fd_mcs", hosts)) {
+ if (request_irq(irq, fd_mcs_intr, IRQF_SHARED, "fd_mcs", hosts)) {
printk(KERN_ERR "fd_mcs: interrupt is not available, skipping...\n");
continue;
}
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index 0335688..b0694dc 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -949,7 +949,7 @@
/* Register the IRQ with the kernel */
retcode = request_irq( interrupt_level,
- do_fdomain_16x0_intr, pdev?SA_SHIRQ:0, "fdomain", shpnt);
+ do_fdomain_16x0_intr, pdev?IRQF_SHARED:0, "fdomain", shpnt);
if (retcode < 0) {
if (retcode == -EINVAL) {
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index fbc8e16..67f1100 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -461,7 +461,7 @@
instance->irq = NCR5380_probe_irq(instance, 0xffff);
if (instance->irq != SCSI_IRQ_NONE)
- if (request_irq(instance->irq, generic_NCR5380_intr, SA_INTERRUPT, "NCR5380", instance)) {
+ if (request_irq(instance->irq, generic_NCR5380_intr, IRQF_DISABLED, "NCR5380", instance)) {
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
instance->irq = SCSI_IRQ_NONE;
}
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 76071a1..43afd47 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -4350,7 +4350,7 @@
printk("Configuring GDT-ISA HA at BIOS 0x%05X IRQ %u DRQ %u\n",
isa_bios,ha->irq,ha->drq);
- if (request_irq(ha->irq,gdth_interrupt,SA_INTERRUPT,"gdth",ha)) {
+ if (request_irq(ha->irq,gdth_interrupt,IRQF_DISABLED,"gdth",ha)) {
printk("GDT-ISA: Unable to allocate IRQ\n");
scsi_unregister(shp);
continue;
@@ -4476,7 +4476,7 @@
printk("Configuring GDT-EISA HA at Slot %d IRQ %u\n",
eisa_slot>>12,ha->irq);
- if (request_irq(ha->irq,gdth_interrupt,SA_INTERRUPT,"gdth",ha)) {
+ if (request_irq(ha->irq,gdth_interrupt,IRQF_DISABLED,"gdth",ha)) {
printk("GDT-EISA: Unable to allocate IRQ\n");
scsi_unregister(shp);
continue;
@@ -4603,7 +4603,7 @@
pcistr[ctr].bus,PCI_SLOT(pcistr[ctr].device_fn),ha->irq);
if (request_irq(ha->irq, gdth_interrupt,
- SA_INTERRUPT|SA_SHIRQ, "gdth", ha))
+ IRQF_DISABLED|IRQF_SHARED, "gdth", ha))
{
printk("GDT-PCI: Unable to allocate IRQ\n");
scsi_unregister(shp);
diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c
index 5b15449..a0d831b 100644
--- a/drivers/scsi/gvp11.c
+++ b/drivers/scsi/gvp11.c
@@ -328,7 +328,7 @@
(epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10
: WD33C93_FS_12_15);
- request_irq(IRQ_AMIGA_PORTS, gvp11_intr, SA_SHIRQ, "GVP11 SCSI",
+ request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED, "GVP11 SCSI",
instance);
DMA(instance)->CNTR = GVP11_DMAC_INT_ENABLE;
num_gvp11++;
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index f778083..ab2f8b2 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -1304,7 +1304,7 @@
pci_set_drvdata(pcidev, host);
- if (request_irq(pcidev->irq, hptiop_intr, SA_SHIRQ,
+ if (request_irq(pcidev->irq, hptiop_intr, IRQF_SHARED,
driver_name, hba)) {
printk(KERN_ERR "scsi%d: request irq %d failed\n",
hba->host->host_no, pcidev->irq);
diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c
index 1cbc948..2be1dc5 100644
--- a/drivers/scsi/ibmmca.c
+++ b/drivers/scsi/ibmmca.c
@@ -1510,7 +1510,7 @@
#endif
/* get interrupt request level */
- if (request_irq(IM_IRQ, interrupt_handler, SA_SHIRQ, "ibmmcascsi", hosts)) {
+ if (request_irq(IM_IRQ, interrupt_handler, IRQF_SHARED, "ibmmcascsi", hosts)) {
printk(KERN_ERR "IBM MCA SCSI: Unable to get shared IRQ %d.\n", IM_IRQ);
return 0;
} else
@@ -1635,7 +1635,7 @@
/* IRQ11 is used by SCSI-2 F/W Adapter/A */
printk(KERN_DEBUG "IBM MCA SCSI: SCSI-2 F/W adapter needs IRQ 11.\n");
/* get interrupt request level */
- if (request_irq(IM_IRQ_FW, interrupt_handler, SA_SHIRQ, "ibmmcascsi", hosts)) {
+ if (request_irq(IM_IRQ_FW, interrupt_handler, IRQF_SHARED, "ibmmcascsi", hosts)) {
printk(KERN_ERR "IBM MCA SCSI: Unable to get shared IRQ %d.\n", IM_IRQ_FW);
} else
IRQ11_registered++;
@@ -1696,7 +1696,7 @@
/* IRQ11 is used by SCSI-2 F/W Adapter/A */
printk(KERN_DEBUG "IBM MCA SCSI: SCSI-2 F/W adapter needs IRQ 11.\n");
/* get interrupt request level */
- if (request_irq(IM_IRQ_FW, interrupt_handler, SA_SHIRQ, "ibmmcascsi", hosts))
+ if (request_irq(IM_IRQ_FW, interrupt_handler, IRQF_SHARED, "ibmmcascsi", hosts))
printk(KERN_ERR "IBM MCA SCSI: Unable to get shared IRQ %d.\n", IM_IRQ_FW);
else
IRQ11_registered++;
diff --git a/drivers/scsi/in2000.c b/drivers/scsi/in2000.c
index 883bc92..59a4097 100644
--- a/drivers/scsi/in2000.c
+++ b/drivers/scsi/in2000.c
@@ -2015,7 +2015,7 @@
write1_io(0, IO_FIFO_READ); /* start fifo out in read mode */
write1_io(0, IO_INTR_MASK); /* allow all ints */
x = int_tab[(switches & (SW_INT0 | SW_INT1)) >> SW_INT_SHIFT];
- if (request_irq(x, in2000_intr, SA_INTERRUPT, "in2000", instance)) {
+ if (request_irq(x, in2000_intr, IRQF_DISABLED, "in2000", instance)) {
printk("in2000_detect: Unable to allocate IRQ.\n");
detect_count--;
continue;
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 43acb1f..9e10dac 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -2867,7 +2867,7 @@
hreg->sg_tablesize = TOTAL_SG_ENTRY; /* Maximun support is 32 */
/* Initial tulip chip */
- ok = request_irq(pHCB->HCS_Intr, i91u_intr, SA_INTERRUPT | SA_SHIRQ, "i91u", hreg);
+ ok = request_irq(pHCB->HCS_Intr, i91u_intr, IRQF_DISABLED | IRQF_SHARED, "i91u", hreg);
if (ok < 0) {
printk(KERN_WARNING "i91u: unable to request IRQ %d\n\n", pHCB->HCS_Intr);
return 0;
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index e19bf69..01080b3 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -6428,7 +6428,7 @@
ioa_cfg->needs_hard_reset = 1;
ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
- rc = request_irq(pdev->irq, ipr_isr, SA_SHIRQ, IPR_NAME, ioa_cfg);
+ rc = request_irq(pdev->irq, ipr_isr, IRQF_SHARED, IPR_NAME, ioa_cfg);
if (rc) {
dev_err(&pdev->dev, "Couldn't register IRQ %d! rc=%d\n",
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 7436793..3c63928 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -7007,7 +7007,7 @@
memcpy(ha, oldha, sizeof (ips_ha_t));
free_irq(oldha->irq, oldha);
/* Install the interrupt handler with the new ha */
- if (request_irq(ha->irq, do_ipsintr, SA_SHIRQ, ips_name, ha)) {
+ if (request_irq(ha->irq, do_ipsintr, IRQF_SHARED, ips_name, ha)) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Unable to install interrupt handler\n");
scsi_host_put(sh);
@@ -7419,7 +7419,7 @@
}
/* Install the interrupt handler */
- if (request_irq(ha->irq, do_ipsintr, SA_SHIRQ, ips_name, ha)) {
+ if (request_irq(ha->irq, do_ipsintr, IRQF_SHARED, ips_name, ha)) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Unable to install interrupt handler\n");
return ips_abort_init(ha, index);
diff --git a/drivers/scsi/jazz_esp.c b/drivers/scsi/jazz_esp.c
index fc031c7..3fd8a96 100644
--- a/drivers/scsi/jazz_esp.c
+++ b/drivers/scsi/jazz_esp.c
@@ -131,7 +131,7 @@
esp->esp_command_dvma = vdma_alloc(CPHYSADDR(cmd_buffer), sizeof (cmd_buffer));
esp->irq = JAZZ_SCSI_IRQ;
- request_irq(JAZZ_SCSI_IRQ, esp_intr, SA_INTERRUPT, "JAZZ SCSI",
+ request_irq(JAZZ_SCSI_IRQ, esp_intr, IRQF_DISABLED, "JAZZ SCSI",
esp->ehost);
/*
diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c
index eb7bd31..f0871c3 100644
--- a/drivers/scsi/lasi700.c
+++ b/drivers/scsi/lasi700.c
@@ -131,7 +131,7 @@
host->this_id = 7;
host->base = base;
host->irq = dev->irq;
- if(request_irq(dev->irq, NCR_700_intr, SA_SHIRQ, "lasi700", host)) {
+ if(request_irq(dev->irq, NCR_700_intr, IRQF_SHARED, "lasi700", host)) {
printk(KERN_ERR "lasi700: request_irq failed!\n");
goto out_put_host;
}
diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c
index 38bfebf..9ce221f 100644
--- a/drivers/scsi/libata-bmdma.c
+++ b/drivers/scsi/libata-bmdma.c
@@ -853,7 +853,7 @@
return NULL;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->private_data = port[0]->private_data;
if (ports & ATA_PORT_PRIMARY) {
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 908d0f2..5a28d9bf 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1620,7 +1620,7 @@
if (error)
goto out_remove_host;
- error = request_irq(phba->pcidev->irq, lpfc_intr_handler, SA_SHIRQ,
+ error = request_irq(phba->pcidev->irq, lpfc_intr_handler, IRQF_SHARED,
LPFC_DRIVER_NAME, phba);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 5d2cefb..76edbb6 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -4714,7 +4714,7 @@
if (request_irq(irq, (adapter->flag & BOARD_MEMMAP) ?
megaraid_isr_memmapped : megaraid_isr_iomapped,
- SA_SHIRQ, "megaraid", adapter)) {
+ IRQF_SHARED, "megaraid", adapter)) {
printk(KERN_WARNING
"megaraid: Couldn't register IRQ %d!\n", irq);
goto out_free_scb_list;
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index b7caf60..9271513 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -767,7 +767,7 @@
//
// request IRQ and register the interrupt service routine
- if (request_irq(adapter->irq, megaraid_isr, SA_SHIRQ, "megaraid",
+ if (request_irq(adapter->irq, megaraid_isr, IRQF_SHARED, "megaraid",
adapter)) {
con_log(CL_ANN, (KERN_WARNING
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 0c9516f..e5c017c 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -2191,7 +2191,7 @@
/*
* Register IRQ
*/
- if (request_irq(pdev->irq, megasas_isr, SA_SHIRQ, "megasas", instance)) {
+ if (request_irq(pdev->irq, megasas_isr, IRQF_SHARED, "megasas", instance)) {
printk(KERN_DEBUG "megasas: Failed to register IRQ\n");
goto fail_irq;
}
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 5c55e15..bd337a9 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -2867,7 +2867,7 @@
nsp32_do_bus_reset(data);
ret = request_irq(host->irq, do_nsp32_isr,
- SA_SHIRQ | SA_SAMPLE_RANDOM, "nsp32", data);
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM, "nsp32", data);
if (ret < 0) {
nsp32_msg(KERN_ERR, "Unable to allocate IRQ for NinjaSCSI32 "
"SCSI PCI controller. Interrupt: %d", host->irq);
diff --git a/drivers/scsi/oktagon_esp.c b/drivers/scsi/oktagon_esp.c
index d7a0bcc..dd67a68 100644
--- a/drivers/scsi/oktagon_esp.c
+++ b/drivers/scsi/oktagon_esp.c
@@ -197,7 +197,7 @@
esp->esp_command_dvma = (__u32) cmd_buffer;
esp->irq = IRQ_AMIGA_PORTS;
- request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ,
+ request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
"BSC Oktagon SCSI", esp->ehost);
/* Figure out our scsi ID on the bus */
diff --git a/drivers/scsi/pas16.c b/drivers/scsi/pas16.c
index 1bf96ed..1434209 100644
--- a/drivers/scsi/pas16.c
+++ b/drivers/scsi/pas16.c
@@ -454,7 +454,7 @@
instance->irq = NCR5380_probe_irq(instance, PAS16_IRQS);
if (instance->irq != SCSI_IRQ_NONE)
- if (request_irq(instance->irq, pas16_intr, SA_INTERRUPT, "pas16", instance)) {
+ if (request_irq(instance->irq, pas16_intr, IRQF_DISABLED, "pas16", instance)) {
printk("scsi%d : IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
instance->irq = SCSI_IRQ_NONE;
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 231f9c3..7ff5851 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1623,7 +1623,7 @@
/* Interrupt handler */
link->irq.Handler = &nspintr;
link->irq.Instance = info;
- link->irq.Attributes |= (SA_SHIRQ | SA_SAMPLE_RANDOM);
+ link->irq.Attributes |= (IRQF_SHARED | IRQF_SAMPLE_RANDOM);
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index 9f59827..0b65099 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -799,7 +799,7 @@
data = (struct sym53c500_data *)host->hostdata;
if (irq_level > 0) {
- if (request_irq(irq_level, SYM53C500_intr, SA_SHIRQ, "SYM53C500", host)) {
+ if (request_irq(irq_level, SYM53C500_intr, IRQF_SHARED, "SYM53C500", host)) {
printk("SYM53C500: unable to allocate IRQ %d\n", irq_level);
goto err_free_scsi;
}
diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c
index 7ebe8e0..d1f38c3 100644
--- a/drivers/scsi/pdc_adma.c
+++ b/drivers/scsi/pdc_adma.c
@@ -690,7 +690,7 @@
probe_ent->port_ops = adma_port_info[board_idx].port_ops;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = mmio_base;
probe_ent->n_ports = ADMA_PORTS;
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index a7e4183..b818b9b 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -192,7 +192,7 @@
- Don't walk the entire list in qla1280_putq_t() just to directly
grab the pointer to the last element afterwards
Rev 3.23.5 Beta August 9, 2001, Jes Sorensen
- - Don't use SA_INTERRUPT, it's use is deprecated for this kinda driver
+ - Don't use IRQF_DISABLED, it's use is deprecated for this kinda driver
Rev 3.23.4 Beta August 8, 2001, Jes Sorensen
- Set dev->max_sectors to 1024
Rev 3.23.3 Beta August 6, 2001, Jes Sorensen
@@ -4369,7 +4369,7 @@
/* Disable ISP interrupts. */
qla1280_disable_intrs(ha);
- if (request_irq(pdev->irq, qla1280_intr_handler, SA_SHIRQ,
+ if (request_irq(pdev->irq, qla1280_intr_handler, IRQF_SHARED,
"qla1280", ha)) {
printk("qla1280 : Failed to reserve interrupt %d already "
"in use\n", pdev->irq);
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index ccaad0b..9306259 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1541,7 +1541,7 @@
host->transportt = qla2xxx_transport_template;
ret = request_irq(pdev->irq, ha->isp_ops.intr_handler,
- SA_INTERRUPT|SA_SHIRQ, QLA2XXX_DRIVER_NAME, ha);
+ IRQF_DISABLED|IRQF_SHARED, QLA2XXX_DRIVER_NAME, ha);
if (ret) {
qla_printk(KERN_WARNING, ha,
"Failed to reserve interrupt %d already in use.\n",
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index 329ead2..69e0551 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -718,7 +718,7 @@
* sanely maintain.
*/
if (request_irq(qpti->irq, qpti_intr,
- SA_SHIRQ, "Qlogic/PTI", qpti))
+ IRQF_SHARED, "Qlogic/PTI", qpti))
goto fail;
printk("qpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index 4a71578..1053c7c 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -2395,7 +2395,7 @@
probe_ent->port_ops = mv_port_info[board_idx].port_ops;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = mmio_base;
probe_ent->private_data = hpriv;
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index b2b6ed5..64631bd 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -743,7 +743,7 @@
probe_ent->port_ops = pdc_port_info[board_idx].port_ops;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = mmio_base;
pdc_ata_setup_port(&probe_ent->port[0], base + 0x200);
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
index 98ddc25..d374c1db 100644
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -680,7 +680,7 @@
probe_ent->port_ops = qs_port_info[board_idx].port_ops;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = mmio_base;
probe_ent->n_ports = QS_PORTS;
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index 51d86d7..7aabb45 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -608,7 +608,7 @@
probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask;
probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags;
mmio_base = pci_iomap(pdev, 5, 0);
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index b5f8fa9..07a1c6a 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -1041,7 +1041,7 @@
probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags);
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = port_base;
probe_ent->private_data = hpriv;
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index a958b45..7d08580 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -428,7 +428,7 @@
probe_ent->port_ops = &k2_sata_ops;
probe_ent->n_ports = 4;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = mmio_base;
/* We don't care much about the PIO/UDMA masks, but the core won't like us
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index 7f86441..ccc8cad 100644
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -1436,7 +1436,7 @@
probe_ent->port_ops = pdc_port_info[board_idx].port_ops;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = mmio_base;
probe_ent->private_data = hpriv;
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
index 501ce17..03baec2 100644
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -242,7 +242,7 @@
probe_ent->port_ops = &svia_sata_ops;
probe_ent->n_ports = N_PORTS;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->pio_mask = 0x1f;
probe_ent->mwdma_mask = 0x07;
probe_ent->udma_mask = 0x7f;
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 616fd96..916fe6f 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -400,7 +400,7 @@
probe_ent->port_ops = &vsc_sata_ops;
probe_ent->n_ports = 4;
probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->irq_flags = IRQF_SHARED;
probe_ent->mmio_base = mmio_base;
/* We don't care much about the PIO/UDMA masks, but the core won't like us
diff --git a/drivers/scsi/seagate.c b/drivers/scsi/seagate.c
index 7fa4da4..3f312a8 100644
--- a/drivers/scsi/seagate.c
+++ b/drivers/scsi/seagate.c
@@ -497,7 +497,7 @@
return 0;
hostno = instance->host_no;
- if (request_irq (irq, do_seagate_reconnect_intr, SA_INTERRUPT, (controller_type == SEAGATE) ? "seagate" : "tmc-8xx", instance)) {
+ if (request_irq (irq, do_seagate_reconnect_intr, IRQF_DISABLED, (controller_type == SEAGATE) ? "seagate" : "tmc-8xx", instance)) {
printk(KERN_ERR "scsi%d : unable to allocate IRQ%d\n", hostno, irq);
return 0;
}
diff --git a/drivers/scsi/sim710.c b/drivers/scsi/sim710.c
index 2b27893..b27e854 100644
--- a/drivers/scsi/sim710.c
+++ b/drivers/scsi/sim710.c
@@ -133,7 +133,7 @@
host->this_id = scsi_id;
host->base = base_addr;
host->irq = irq;
- if (request_irq(irq, NCR_700_intr, SA_SHIRQ, "sim710", host)) {
+ if (request_irq(irq, NCR_700_intr, IRQF_SHARED, "sim710", host)) {
printk(KERN_ERR "sim710: request_irq failed\n");
goto out_put_host;
}
diff --git a/drivers/scsi/sun3x_esp.c b/drivers/scsi/sun3x_esp.c
index 2e2c1eb..1f328ca 100644
--- a/drivers/scsi/sun3x_esp.c
+++ b/drivers/scsi/sun3x_esp.c
@@ -97,7 +97,7 @@
esp->esp_command_dvma = dvma_vtob((unsigned long)esp->esp_command);
esp->irq = 2;
- if (request_irq(esp->irq, esp_intr, SA_INTERRUPT,
+ if (request_irq(esp->irq, esp_intr, IRQF_DISABLED,
"SUN3X SCSI", esp->ehost)) {
esp_deallocate(esp);
return 0;
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index ea82d3d..8c50507 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -1547,7 +1547,7 @@
* If we synchonize the C code with SCRIPTS on interrupt,
* we do not want to share the INTR line at all.
*/
- if (request_irq(pdev->irq, sym53c8xx_intr, SA_SHIRQ, NAME53C8XX, np)) {
+ if (request_irq(pdev->irq, sym53c8xx_intr, IRQF_SHARED, NAME53C8XX, np)) {
printf_err("%s: request irq %d failure\n",
sym_name(np), pdev->irq);
goto attach_failed;
diff --git a/drivers/scsi/t128.c b/drivers/scsi/t128.c
index a24f661..2df6747 100644
--- a/drivers/scsi/t128.c
+++ b/drivers/scsi/t128.c
@@ -260,7 +260,7 @@
instance->irq = NCR5380_probe_irq(instance, T128_IRQS);
if (instance->irq != SCSI_IRQ_NONE)
- if (request_irq(instance->irq, t128_intr, SA_INTERRUPT, "t128", instance)) {
+ if (request_irq(instance->irq, t128_intr, IRQF_DISABLED, "t128", instance)) {
printk("scsi%d : IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
instance->irq = SCSI_IRQ_NONE;
diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c
index 7540f6a..9404ff3 100644
--- a/drivers/scsi/tmscsim.c
+++ b/drivers/scsi/tmscsim.c
@@ -2584,7 +2584,7 @@
/* Reset Pending INT */
DC390_read8_(INT_Status, io_port);
- if (request_irq(pdev->irq, do_DC390_Interrupt, SA_SHIRQ,
+ if (request_irq(pdev->irq, do_DC390_Interrupt, IRQF_SHARED,
"tmscsim", pACB)) {
printk(KERN_ERR "DC390: register IRQ error!\n");
goto out_release_region;
diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c
index 35c043e..5744961 100644
--- a/drivers/scsi/u14-34f.c
+++ b/drivers/scsi/u14-34f.c
@@ -872,7 +872,7 @@
/* Board detected, allocate its IRQ */
if (request_irq(irq, do_interrupt_handler,
- SA_INTERRUPT | ((subversion == ESA) ? SA_SHIRQ : 0),
+ IRQF_DISABLED | ((subversion == ESA) ? IRQF_SHARED : 0),
driver_name, (void *) &sha[j])) {
printk("%s: unable to allocate IRQ %u, detaching.\n", name, irq);
goto freelock;
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index 574955b..a0b61af 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -1250,7 +1250,7 @@
return 0;
- if (request_irq(host->irq, wd7000_intr, SA_INTERRUPT, "wd7000", host)) {
+ if (request_irq(host->irq, wd7000_intr, IRQF_DISABLED, "wd7000", host)) {
printk("wd7000_init: can't get IRQ %d.\n", host->irq);
return (0);
}
diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c
index a6cfbb3..4b5f908 100644
--- a/drivers/scsi/zalon.c
+++ b/drivers/scsi/zalon.c
@@ -136,7 +136,7 @@
if (!host)
goto fail;
- if (request_irq(dev->irq, ncr53c8xx_intr, SA_SHIRQ, "zalon", host)) {
+ if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) {
printk(KERN_ERR "%s: irq problem with %d, detaching\n ",
dev->dev.bus_id, dev->irq);
goto fail;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 9c5d36f..0995430 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -48,7 +48,7 @@
/*
* Configuration:
- * share_irqs - whether we pass SA_SHIRQ to request_irq(). This option
+ * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option
* is unsafe when used on edge-triggered interrupts.
*/
static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
@@ -1400,7 +1400,7 @@
static int serial_link_irq_chain(struct uart_8250_port *up)
{
struct irq_info *i = irq_lists + up->port.irq;
- int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? SA_SHIRQ : 0;
+ int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
spin_lock_irq(&i->lock);
diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c
index 7b3b3f3..a7d6643 100644
--- a/drivers/serial/at91_serial.c
+++ b/drivers/serial/at91_serial.c
@@ -387,7 +387,7 @@
/*
* Allocate the IRQ
*/
- retval = request_irq(port->irq, at91_interrupt, SA_SHIRQ, "at91_serial", port);
+ retval = request_irq(port->irq, at91_interrupt, IRQF_SHARED, "at91_serial", port);
if (retval) {
printk("at91_serial: at91_startup - Can't get irq\n");
return retval;
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 901be34..cabd048 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -415,7 +415,7 @@
* Fixed DEF_TX value that caused the serial transmitter pin (txd) to go to 0 when
* closing the last filehandle, NASTY!.
* Added break generation, not tested though!
- * Use SA_SHIRQ when request_irq() for ser2 and ser3 (shared with) par0 and par1.
+ * Use IRQF_SHARED when request_irq() for ser2 and ser3 (shared with) par0 and par1.
* You can't use them at the same time (yet..), but you can hopefully switch
* between ser2/par0, ser3/par1 with the same kernel config.
* Replaced some magic constants with defines
@@ -4942,55 +4942,55 @@
/* Not needed in simulator. May only complicate stuff. */
/* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */
- if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial ", NULL))
+ if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial ", NULL))
panic("irq8");
#ifdef CONFIG_ETRAX_SERIAL_PORT0
#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
- if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, SA_INTERRUPT, "serial 0 dma tr", NULL))
+ if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 0 dma tr", NULL))
panic("irq22");
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
- if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, SA_INTERRUPT, "serial 0 dma rec", NULL))
+ if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 0 dma rec", NULL))
panic("irq23");
#endif
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT1
#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
- if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, SA_INTERRUPT, "serial 1 dma tr", NULL))
+ if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 1 dma tr", NULL))
panic("irq24");
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
- if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, SA_INTERRUPT, "serial 1 dma rec", NULL))
+ if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 1 dma rec", NULL))
panic("irq25");
#endif
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT2
/* DMA Shared with par0 (and SCSI0 and ATA) */
#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
- if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 2 dma tr", NULL))
+ if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma tr", NULL))
panic("irq18");
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
- if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 2 dma rec", NULL))
+ if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma rec", NULL))
panic("irq19");
#endif
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT3
/* DMA Shared with par1 (and SCSI1 and Extern DMA 0) */
#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
- if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 3 dma tr", NULL))
+ if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma tr", NULL))
panic("irq20");
#endif
#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
- if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 3 dma rec", NULL))
+ if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma rec", NULL))
panic("irq21");
#endif
#endif
#ifdef CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST
- if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, SA_SHIRQ | SA_INTERRUPT,
+ if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, IRQF_SHARED | IRQF_DISABLED,
"fast serial dma timeout", NULL)) {
printk(KERN_CRIT "err: timer1 irq\n");
}
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index ecf824b..d119c82 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -797,7 +797,7 @@
restore_flags(flags);
if (request_irq(dz_ports[0].port.irq, dz_interrupt,
- SA_INTERRUPT, "DZ", &dz_ports[0]))
+ IRQF_DISABLED, "DZ", &dz_ports[0]))
panic("Unable to register DZ interrupt");
ret = uart_register_driver(&dz_reg);
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index ad1e753..a3c00a2 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -1563,7 +1563,7 @@
/* save off irq and request irq line */
if ( (retval = request_irq(dev->irq, icom_interrupt,
- SA_INTERRUPT | SA_SHIRQ, ICOM_DRIVER_NAME,
+ IRQF_DISABLED | IRQF_SHARED, ICOM_DRIVER_NAME,
(void *) icom_adapter))) {
goto probe_exit2;
}
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 0b5f39d..4a142d6 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -404,7 +404,7 @@
if (retval) goto error_out2;
retval = request_irq(sport->rtsirq, imx_rtsint,
- SA_TRIGGER_FALLING | SA_TRIGGER_RISING,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
DRIVER_NAME, sport);
if (retval) goto error_out3;
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index 717e47b..576ca1e 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -2855,7 +2855,7 @@
control->ic_soft = soft;
/* Hook up interrupt handler */
- if (!request_irq(idd->idd_pdev->irq, ioc4_intr, SA_SHIRQ,
+ if (!request_irq(idd->idd_pdev->irq, ioc4_intr, IRQF_SHARED,
"sgi-ioc4serial", soft)) {
control->ic_irq = idd->idd_pdev->irq;
} else {
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index b3e1f71..244f63b 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -121,7 +121,7 @@
}
rc = request_irq(brd->irq, brd->bd_ops->intr,
- SA_INTERRUPT|SA_SHIRQ, "JSM", brd);
+ IRQF_DISABLED|IRQF_SHARED, "JSM", brd);
if (rc) {
printk(KERN_WARNING "Failed to hook IRQ %d\n",brd->irq);
goto out_iounmap;
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index fbaae96..e7fe4bb 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -542,7 +542,7 @@
static int serial_link_irq_chain(struct uart_sio_port *up)
{
struct irq_info *i = irq_lists + up->port.irq;
- int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? SA_SHIRQ : 0;
+ int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
spin_lock_irq(&i->lock);
diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c
index 29c0630..832abd3 100644
--- a/drivers/serial/mcfserial.c
+++ b/drivers/serial/mcfserial.c
@@ -1596,7 +1596,7 @@
/* Clear mask, so no surprise interrupts. */
uartp[MCFUART_UIMR] = 0;
- if (request_irq(info->irq, mcfrs_interrupt, SA_INTERRUPT,
+ if (request_irq(info->irq, mcfrs_interrupt, IRQF_DISABLED,
"ColdFire UART", NULL)) {
printk("MCFRS: Unable to attach ColdFire UART %d interrupt "
"vector=%d\n", info->line, info->irq);
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 1b8e554..48eb22d 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -190,7 +190,7 @@
/* Request IRQ */
ret = request_irq(port->irq, mpc52xx_uart_int,
- SA_INTERRUPT | SA_SAMPLE_RANDOM, "mpc52xx_psc_uart", port);
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "mpc52xx_psc_uart", port);
if (ret)
return ret;
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index 8c498f7..63d2a66 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -1412,7 +1412,7 @@
/* If irq's are shared, need to set flag */
if (mpsc_ports[0].port.irq == mpsc_ports[1].port.irq)
- flag = SA_SHIRQ;
+ flag = IRQF_SHARED;
if (request_irq(pi->port.irq, mpsc_sdma_intr, flag,
"mpsc-sdma", pi))
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 4d94354..459c023 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -934,7 +934,7 @@
}
pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
- if (request_irq(uap->port.irq, pmz_interrupt, SA_SHIRQ, "PowerMac Zilog", uap)) {
+ if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, "PowerMac Zilog", uap)) {
dev_err(&uap->dev->ofdev.dev,
"Unable to register zs interrupt handler.\n");
pmz_set_scc_power(uap, 0);
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 28c1881..b361669 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -495,7 +495,7 @@
sio_out(up, TXX9_SIDISR, 0);
retval = request_irq(up->port.irq, serial_txx9_interrupt,
- SA_SHIRQ, "serial_txx9", up);
+ IRQF_SHARED, "serial_txx9", up);
if (retval)
return retval;
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 2509c32..3015733 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -841,7 +841,7 @@
printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n");
return -ENODEV;
}
- if (request_irq(port->irqs[0], sci_mpxed_interrupt, SA_INTERRUPT,
+ if (request_irq(port->irqs[0], sci_mpxed_interrupt, IRQF_DISABLED,
"sci", port)) {
printk(KERN_ERR "sci: Cannot allocate irq.\n");
return -ENODEV;
@@ -850,7 +850,7 @@
for (i = 0; i < ARRAY_SIZE(handlers); i++) {
if (!port->irqs[i])
continue;
- if (request_irq(port->irqs[i], handlers[i], SA_INTERRUPT,
+ if (request_irq(port->irqs[i], handlers[i], IRQF_DISABLED,
desc[i], port)) {
printk(KERN_ERR "sci: Cannot allocate irq.\n");
return -ENODEV;
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 4b0afc8..2f148e5 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -648,7 +648,7 @@
static int sn_sal_connect_interrupt(struct sn_cons_port *port)
{
if (request_irq(SGI_UART_VECTOR, sn_sal_interrupt,
- SA_INTERRUPT | SA_SHIRQ,
+ IRQF_DISABLED | IRQF_SHARED,
"SAL console driver", port) >= 0) {
return SGI_UART_VECTOR;
}
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 20a4869..0dbd4df 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -1027,7 +1027,7 @@
int err;
err = request_irq(up->port.irq, sunsab_interrupt,
- SA_SHIRQ, "sab", up);
+ IRQF_SHARED, "sab", up);
if (err) {
of_iounmap(up->port.membase,
sizeof(union sab82532_async_regs));
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index eabf477..f9013ba 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -667,10 +667,10 @@
if (up->su_type != SU_PORT_PORT) {
retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt,
- SA_SHIRQ, su_typev[up->su_type], up);
+ IRQF_SHARED, su_typev[up->su_type], up);
} else {
retval = request_irq(up->port.irq, sunsu_serial_interrupt,
- SA_SHIRQ, su_typev[up->su_type], up);
+ IRQF_SHARED, su_typev[up->su_type], up);
}
if (retval) {
printk("su: Cannot register IRQ %d\n", up->port.irq);
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 9ee7f3a..a1456d9 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1354,7 +1354,7 @@
if (zilog_irq == -1) {
zilog_irq = op->irqs[0];
- err = request_irq(zilog_irq, sunzilog_interrupt, SA_SHIRQ,
+ err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
"zs", sunzilog_irq_chain);
if (err) {
of_iounmap(rp, sizeof(struct zilog_layout));
diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c
index a0da2aa..f802867 100644
--- a/drivers/serial/v850e_uart.c
+++ b/drivers/serial/v850e_uart.c
@@ -372,13 +372,13 @@
/* Alloc RX irq. */
err = request_irq (V850E_UART_RX_IRQ (port->line), v850e_uart_rx_irq,
- SA_INTERRUPT, "v850e_uart", port);
+ IRQF_DISABLED, "v850e_uart", port);
if (err)
return err;
/* Alloc TX irq. */
err = request_irq (V850E_UART_TX_IRQ (port->line), v850e_uart_tx_irq,
- SA_INTERRUPT, "v850e_uart", port);
+ IRQF_DISABLED, "v850e_uart", port);
if (err) {
free_irq (V850E_UART_RX_IRQ (port->line), port);
return err;
diff --git a/drivers/sn/ioc3.c b/drivers/sn/ioc3.c
index 0040f10..6c7e035 100644
--- a/drivers/sn/ioc3.c
+++ b/drivers/sn/ioc3.c
@@ -706,7 +706,7 @@
writel(~0, &idd->vma->eisr);
idd->dual_irq = 1;
- if (!request_irq(pdev->irq, ioc3_intr_eth, SA_SHIRQ,
+ if (!request_irq(pdev->irq, ioc3_intr_eth, IRQF_SHARED,
"ioc3-eth", (void *)idd)) {
idd->irq_eth = pdev->irq;
} else {
@@ -714,7 +714,7 @@
"%s : request_irq fails for IRQ 0x%x\n ",
__FUNCTION__, pdev->irq);
}
- if (!request_irq(pdev->irq+2, ioc3_intr_io, SA_SHIRQ,
+ if (!request_irq(pdev->irq+2, ioc3_intr_io, IRQF_SHARED,
"ioc3-io", (void *)idd)) {
idd->irq_io = pdev->irq+2;
} else {
@@ -723,7 +723,7 @@
__FUNCTION__, pdev->irq+2);
}
} else {
- if (!request_irq(pdev->irq, ioc3_intr_io, SA_SHIRQ,
+ if (!request_irq(pdev->irq, ioc3_intr_io, IRQF_SHARED,
"ioc3", (void *)idd)) {
idd->irq_io = pdev->irq;
} else {
diff --git a/drivers/tc/zs.c b/drivers/tc/zs.c
index 93bc90b..5e8a276 100644
--- a/drivers/tc/zs.c
+++ b/drivers/tc/zs.c
@@ -1791,7 +1791,7 @@
zs_soft[channel].clk_divisor = 16;
zs_soft[channel].zs_baud = get_zsbaud(&zs_soft[channel]);
- if (request_irq(zs_soft[channel].irq, rs_interrupt, SA_SHIRQ,
+ if (request_irq(zs_soft[channel].irq, rs_interrupt, IRQF_SHARED,
"scc", &zs_soft[channel]))
printk(KERN_ERR "decserial: can't get irq %d\n",
zs_soft[channel].irq);
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 9d16716..5078fb3 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -125,7 +125,7 @@
pci_set_master (dev);
- retval = usb_add_hcd (hcd, dev->irq, SA_SHIRQ);
+ retval = usb_add_hcd (hcd, dev->irq, IRQF_SHARED);
if (retval != 0)
goto err4;
return retval;
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index acb3c3d..1c459ff 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1653,13 +1653,13 @@
pullup(udc, 0);
/* request UDC and maybe VBUS irqs */
- if (request_irq(AT91_ID_UDP, at91_udc_irq, SA_INTERRUPT, driver_name, udc)) {
+ if (request_irq(AT91_ID_UDP, at91_udc_irq, IRQF_DISABLED, driver_name, udc)) {
DBG("request irq %d failed\n", AT91_ID_UDP);
retval = -EBUSY;
goto fail1;
}
if (udc->board.vbus_pin > 0) {
- if (request_irq(udc->board.vbus_pin, at91_vbus_irq, SA_INTERRUPT, driver_name, udc)) {
+ if (request_irq(udc->board.vbus_pin, at91_vbus_irq, IRQF_DISABLED, driver_name, udc)) {
DBG("request vbus irq %d failed\n", udc->board.vbus_pin);
free_irq(AT91_ID_UDP, udc);
retval = -EBUSY;
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 3f827de..7cf2999 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -1916,7 +1916,7 @@
/* init to known state, then setup irqs */
udc_reset(dev);
udc_reinit (dev);
- if (request_irq(pdev->irq, goku_irq, SA_SHIRQ/*|SA_SAMPLE_RANDOM*/,
+ if (request_irq(pdev->irq, goku_irq, IRQF_SHARED/*|IRQF_SAMPLE_RANDOM*/,
driver_name, dev) != 0) {
DBG(dev, "request interrupt %d failed\n", pdev->irq);
retval = -EBUSY;
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index 0d3424e..bb22b7e 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -2107,7 +2107,7 @@
/* irq setup after old hardware state is cleaned up */
retval =
- request_irq(IRQ_USBINTR, lh7a40x_udc_irq, SA_INTERRUPT, driver_name,
+ request_irq(IRQ_USBINTR, lh7a40x_udc_irq, IRQF_DISABLED, driver_name,
dev);
if (retval != 0) {
DEBUG(KERN_ERR "%s: can't get irq %i, err %d\n", driver_name,
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 570996d..0924323 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2895,7 +2895,7 @@
goto done;
}
- if (request_irq (pdev->irq, net2280_irq, SA_SHIRQ, driver_name, dev)
+ if (request_irq (pdev->irq, net2280_irq, IRQF_SHARED, driver_name, dev)
!= 0) {
ERROR (dev, "request interrupt %d failed\n", pdev->irq);
retval = -EBUSY;
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 0d642ac..2de9748 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -772,7 +772,7 @@
struct omap_ep *ep = data;
/* if ch_status & OMAP_DMA_DROP_IRQ ... */
- /* if ch_status & OMAP_DMA_TOUT_IRQ ... */
+ /* if ch_status & OMAP1_DMA_TOUT_IRQ ... */
ERR("%s dma error, lch %d status %02x\n", ep->ep.name, lch, ch_status);
/* complete current transfer ... */
@@ -2818,7 +2818,7 @@
/* USB general purpose IRQ: ep0, state changes, dma, etc */
status = request_irq(pdev->resource[1].start, omap_udc_irq,
- SA_SAMPLE_RANDOM, driver_name, udc);
+ IRQF_SAMPLE_RANDOM, driver_name, udc);
if (status != 0) {
ERR( "can't get irq %ld, err %d\n",
pdev->resource[1].start, status);
@@ -2827,7 +2827,7 @@
/* USB "non-iso" IRQ (PIO for all but ep0) */
status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
- SA_SAMPLE_RANDOM, "omap_udc pio", udc);
+ IRQF_SAMPLE_RANDOM, "omap_udc pio", udc);
if (status != 0) {
ERR( "can't get irq %ld, err %d\n",
pdev->resource[2].start, status);
@@ -2835,7 +2835,7 @@
}
#ifdef USE_ISO
status = request_irq(pdev->resource[3].start, omap_udc_iso_irq,
- SA_INTERRUPT, "omap_udc iso", udc);
+ IRQF_DISABLED, "omap_udc iso", udc);
if (status != 0) {
ERR("can't get irq %ld, err %d\n",
pdev->resource[3].start, status);
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index c88650d..fff027d 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -2521,7 +2521,7 @@
/* irq setup after old hardware state is cleaned up */
retval = request_irq(IRQ_USB, pxa2xx_udc_irq,
- SA_INTERRUPT, driver_name, dev);
+ IRQF_DISABLED, driver_name, dev);
if (retval != 0) {
printk(KERN_ERR "%s: can't get irq %i, err %d\n",
driver_name, IRQ_USB, retval);
@@ -2533,7 +2533,7 @@
if (machine_is_lubbock()) {
retval = request_irq(LUBBOCK_USB_DISC_IRQ,
lubbock_vbus_irq,
- SA_INTERRUPT | SA_SAMPLE_RANDOM,
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
driver_name, dev);
if (retval != 0) {
printk(KERN_ERR "%s: can't get irq %i, err %d\n",
@@ -2544,7 +2544,7 @@
}
retval = request_irq(LUBBOCK_USB_IRQ,
lubbock_vbus_irq,
- SA_INTERRUPT | SA_SAMPLE_RANDOM,
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
driver_name, dev);
if (retval != 0) {
printk(KERN_ERR "%s: can't get irq %i, err %d\n",
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 9b4697a..d66867a 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -148,7 +148,7 @@
/* ehci_hcd_init(hcd_to_ehci(hcd)); */
retval =
- usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT | SA_SHIRQ);
+ usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED | IRQF_SHARED);
if (retval == 0)
return retval;
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index a49a689..d030516 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -121,7 +121,7 @@
temp = in_le32(hcd->regs + 0x1a8);
out_le32(hcd->regs + 0x1a8, temp | 0x3);
- retval = usb_add_hcd(hcd, irq, SA_SHIRQ);
+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (retval != 0)
goto err4;
return retval;
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 1438625..5147ed4 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1653,7 +1653,7 @@
goto err6;
}
- ret = usb_add_hcd(hcd, irq, SA_INTERRUPT);
+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
if (ret)
goto err6;
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 6b7350b..cdbafb7 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -125,7 +125,7 @@
at91_start_hc(pdev);
ohci_hcd_init(hcd_to_ohci(hcd));
- retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT);
+ retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED);
if (retval == 0)
return retval;
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index a1c8b3b..689261e 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -191,7 +191,7 @@
au1xxx_start_ohc(dev);
ohci_hcd_init(hcd_to_ohci(hcd));
- retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT | SA_SHIRQ);
+ retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED | IRQF_SHARED);
if (retval == 0)
return retval;
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index 0020ed7..5602da9 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -100,7 +100,7 @@
lh7a404_start_hc(dev);
ohci_hcd_init(hcd_to_ohci(hcd));
- retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
+ retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED);
if (retval == 0)
return retval;
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index ca19abe..c4c4bab 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -14,7 +14,7 @@
* This file is licenced under the GPL.
*/
-#include <linux/signal.h> /* SA_INTERRUPT */
+#include <linux/signal.h> /* IRQF_DISABLED */
#include <linux/jiffies.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
@@ -334,7 +334,7 @@
retval = -ENXIO;
goto err2;
}
- retval = usb_add_hcd(hcd, irq, SA_INTERRUPT);
+ retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
if (retval == 0)
return retval;
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index b2a8dfa..9fe56ff 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -75,7 +75,7 @@
ohci->flags |= OHCI_BIG_ENDIAN;
ohci_hcd_init(ohci);
- retval = usb_add_hcd(hcd, irq, SA_INTERRUPT);
+ retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
if (retval == 0)
return retval;
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index fafe7c1..6f559e1 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -190,7 +190,7 @@
ohci_hcd_init(hcd_to_ohci(hcd));
- retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT);
+ retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED);
if (retval == 0)
return retval;
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 1da5de5..d2fc696 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -388,7 +388,7 @@
ohci_hcd_init(hcd_to_ohci(hcd));
- retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
+ retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED);
if (retval != 0)
goto err_ioremap;
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index fb3221e..ce3de10 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -143,7 +143,7 @@
sa1111_start_hc(dev);
ohci_hcd_init(hcd_to_ohci(hcd));
- retval = usb_add_hcd(hcd, dev->irq[1], SA_INTERRUPT);
+ retval = usb_add_hcd(hcd, dev->irq[1], IRQF_DISABLED);
if (retval == 0)
return retval;
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index c327168..fa34092 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1749,7 +1749,7 @@
* was on a system with single edge triggering, so most sorts of
* triggering arrangement should work.
*/
- retval = usb_add_hcd(hcd, irq, SA_INTERRUPT | SA_SHIRQ);
+ retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (retval != 0)
goto err6;
diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
index 4660428..fd95c2d 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/arcfb.c
@@ -561,7 +561,7 @@
platform_set_drvdata(dev, info);
if (irq) {
par->irq = irq;
- if (request_irq(par->irq, &arcfb_interrupt, SA_SHIRQ,
+ if (request_irq(par->irq, &arcfb_interrupt, IRQF_SHARED,
"arcfb", info)) {
printk(KERN_INFO
"arcfb: Failed req IRQ %d\n", par->irq);
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 85fcd22..0c97067 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -1567,7 +1567,7 @@
u32 int_cntl;
if (!test_and_set_bit(0, &par->irq_flags)) {
- if (request_irq(par->irq, aty_irq, SA_SHIRQ, "atyfb", par)) {
+ if (request_irq(par->irq, aty_irq, IRQF_SHARED, "atyfb", par)) {
clear_bit(0, &par->irq_flags);
return -EINVAL;
}
diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c
index 600d3e0..c6a5f0c 100644
--- a/drivers/video/au1200fb.c
+++ b/drivers/video/au1200fb.c
@@ -1694,7 +1694,7 @@
/* Now hook interrupt too */
if ((ret = request_irq(AU1200_LCD_INT, au1200fb_handle_irq,
- SA_INTERRUPT | SA_SHIRQ, "lcd", (void *)dev)) < 0) {
+ IRQF_DISABLED | IRQF_SHARED, "lcd", (void *)dev)) < 0) {
print_err("fail to request interrupt line %d (err: %d)",
AU1200_LCD_INT, ret);
goto failed;
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 8b5bf79..4a57dab 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -233,7 +233,7 @@
if (!test_and_set_bit(0, &ACCESS_FBINFO(irq_flags))) {
if (request_irq(ACCESS_FBINFO(pcidev)->irq, matrox_irq,
- SA_SHIRQ, "matroxfb", MINFO)) {
+ IRQF_SHARED, "matroxfb", MINFO)) {
clear_bit(0, &ACCESS_FBINFO(irq_flags));
return -EINVAL;
}
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 54663a9..bbb0710 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1334,7 +1334,7 @@
goto failed;
}
- ret = request_irq(IRQ_LCD, pxafb_handle_irq, SA_INTERRUPT, "LCD", fbi);
+ ret = request_irq(IRQ_LCD, pxafb_handle_irq, IRQF_DISABLED, "LCD", fbi);
if (ret) {
dev_err(&dev->dev, "request_irq failed: %d\n", ret);
ret = -EBUSY;
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index fbc4118..f461eb1 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -735,7 +735,7 @@
dprintk("got LCD region\n");
- ret = request_irq(irq, s3c2410fb_irq, SA_INTERRUPT, pdev->name, info);
+ ret = request_irq(irq, s3c2410fb_irq, IRQF_DISABLED, pdev->name, info);
if (ret) {
dev_err(&pdev->dev, "cannot get irq %d - err %d\n", irq, ret);
ret = -EBUSY;
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 553fd84..a2e6e72 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -1472,7 +1472,7 @@
if (ret)
goto failed;
- ret = request_irq(irq, sa1100fb_handle_irq, SA_INTERRUPT,
+ ret = request_irq(irq, sa1100fb_handle_irq, IRQF_DISABLED,
"LCD", fbi);
if (ret) {
printk(KERN_ERR "sa1100fb: request_irq failed: %d\n", ret);
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 477eaa2..12dfdcf 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -2932,6 +2932,11 @@
}
if (error)
goto out;
+ /*
+ * file size is changed, ctime and mtime are
+ * to be updated
+ */
+ attr->ia_valid |= (ATTR_MTIME | ATTR_CTIME);
}
}
diff --git a/fs/ufs/balloc.c b/fs/ufs/balloc.c
index 95b878e..b01804b 100644
--- a/fs/ufs/balloc.c
+++ b/fs/ufs/balloc.c
@@ -217,48 +217,6 @@
return;
}
-static struct page *ufs_get_locked_page(struct address_space *mapping,
- unsigned long index)
-{
- struct page *page;
-
-try_again:
- page = find_lock_page(mapping, index);
- if (!page) {
- page = read_cache_page(mapping, index,
- (filler_t*)mapping->a_ops->readpage,
- NULL);
- if (IS_ERR(page)) {
- printk(KERN_ERR "ufs_change_blocknr: "
- "read_cache_page error: ino %lu, index: %lu\n",
- mapping->host->i_ino, index);
- goto out;
- }
-
- lock_page(page);
-
- if (!PageUptodate(page) || PageError(page)) {
- unlock_page(page);
- page_cache_release(page);
-
- printk(KERN_ERR "ufs_change_blocknr: "
- "can not read page: ino %lu, index: %lu\n",
- mapping->host->i_ino, index);
-
- page = ERR_PTR(-EIO);
- goto out;
- }
- }
-
- if (unlikely(!page->mapping || !page_has_buffers(page))) {
- unlock_page(page);
- page_cache_release(page);
- goto try_again;/*we really need these buffers*/
- }
-out:
- return page;
-}
-
/*
* Modify inode page cache in such way:
* have - blocks with b_blocknr equal to oldb...oldb+count-1
@@ -311,10 +269,8 @@
set_page_dirty(page);
- if (likely(cur_index != index)) {
- unlock_page(page);
- page_cache_release(page);
- }
+ if (likely(cur_index != index))
+ ufs_put_locked_page(page);
}
UFSD("EXIT\n");
}
diff --git a/fs/ufs/file.c b/fs/ufs/file.c
index 0e50015..a9c6e5f 100644
--- a/fs/ufs/file.c
+++ b/fs/ufs/file.c
@@ -60,7 +60,3 @@
.fsync = ufs_sync_file,
.sendfile = generic_file_sendfile,
};
-
-struct inode_operations ufs_file_inode_operations = {
- .truncate = ufs_truncate,
-};
diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c
index 488b5ff..e7c8615 100644
--- a/fs/ufs/inode.c
+++ b/fs/ufs/inode.c
@@ -843,14 +843,17 @@
void ufs_delete_inode (struct inode * inode)
{
+ loff_t old_i_size;
+
truncate_inode_pages(&inode->i_data, 0);
/*UFS_I(inode)->i_dtime = CURRENT_TIME;*/
lock_kernel();
mark_inode_dirty(inode);
ufs_update_inode(inode, IS_SYNC(inode));
+ old_i_size = inode->i_size;
inode->i_size = 0;
- if (inode->i_blocks)
- ufs_truncate (inode);
+ if (inode->i_blocks && ufs_truncate(inode, old_i_size))
+ ufs_warning(inode->i_sb, __FUNCTION__, "ufs_truncate failed\n");
ufs_free_inode (inode);
unlock_kernel();
}
diff --git a/fs/ufs/truncate.c b/fs/ufs/truncate.c
index 3c3b301..c9b5587 100644
--- a/fs/ufs/truncate.c
+++ b/fs/ufs/truncate.c
@@ -369,24 +369,97 @@
UFSD("EXIT\n");
return retry;
}
-
-void ufs_truncate (struct inode * inode)
+
+static int ufs_alloc_lastblock(struct inode *inode)
+{
+ int err = 0;
+ struct address_space *mapping = inode->i_mapping;
+ struct ufs_sb_private_info *uspi = UFS_SB(inode->i_sb)->s_uspi;
+ struct ufs_inode_info *ufsi = UFS_I(inode);
+ unsigned lastfrag, i, end;
+ struct page *lastpage;
+ struct buffer_head *bh;
+
+ lastfrag = (i_size_read(inode) + uspi->s_fsize - 1) >> uspi->s_fshift;
+
+ if (!lastfrag) {
+ ufsi->i_lastfrag = 0;
+ goto out;
+ }
+ lastfrag--;
+
+ lastpage = ufs_get_locked_page(mapping, lastfrag >>
+ (PAGE_CACHE_SHIFT - inode->i_blkbits));
+ if (IS_ERR(lastpage)) {
+ err = -EIO;
+ goto out;
+ }
+
+ end = lastfrag & ((1 << (PAGE_CACHE_SHIFT - inode->i_blkbits)) - 1);
+ bh = page_buffers(lastpage);
+ for (i = 0; i < end; ++i)
+ bh = bh->b_this_page;
+
+ if (!buffer_mapped(bh)) {
+ err = ufs_getfrag_block(inode, lastfrag, bh, 1);
+
+ if (unlikely(err))
+ goto out_unlock;
+
+ if (buffer_new(bh)) {
+ clear_buffer_new(bh);
+ unmap_underlying_metadata(bh->b_bdev,
+ bh->b_blocknr);
+ /*
+ * we do not zeroize fragment, because of
+ * if it maped to hole, it already contains zeroes
+ */
+ set_buffer_uptodate(bh);
+ mark_buffer_dirty(bh);
+ set_page_dirty(lastpage);
+ }
+ }
+out_unlock:
+ ufs_put_locked_page(lastpage);
+out:
+ return err;
+}
+
+int ufs_truncate(struct inode *inode, loff_t old_i_size)
{
struct ufs_inode_info *ufsi = UFS_I(inode);
- struct super_block * sb;
- struct ufs_sb_private_info * uspi;
- int retry;
+ struct super_block *sb = inode->i_sb;
+ struct ufs_sb_private_info *uspi = UFS_SB(sb)->s_uspi;
+ int retry, err = 0;
UFSD("ENTER\n");
- sb = inode->i_sb;
- uspi = UFS_SB(sb)->s_uspi;
- if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)))
- return;
+ if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
+ S_ISLNK(inode->i_mode)))
+ return -EINVAL;
if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
- return;
+ return -EPERM;
- block_truncate_page(inode->i_mapping, inode->i_size, ufs_getfrag_block);
+ if (inode->i_size > old_i_size) {
+ /*
+ * if we expand file we should care about
+ * allocation of block for last byte first of all
+ */
+ err = ufs_alloc_lastblock(inode);
+
+ if (err) {
+ i_size_write(inode, old_i_size);
+ goto out;
+ }
+ /*
+ * go away, because of we expand file, and we do not
+ * need free blocks, and zeroizes page
+ */
+ lock_kernel();
+ goto almost_end;
+ }
+
+ block_truncate_page(inode->i_mapping, inode->i_size, ufs_getfrag_block);
lock_kernel();
while (1) {
@@ -404,9 +477,58 @@
yield();
}
+ if (inode->i_size < old_i_size) {
+ /*
+ * now we should have enough space
+ * to allocate block for last byte
+ */
+ err = ufs_alloc_lastblock(inode);
+ if (err)
+ /*
+ * looks like all the same - we have no space,
+ * but we truncate file already
+ */
+ inode->i_size = (ufsi->i_lastfrag - 1) * uspi->s_fsize;
+ }
+almost_end:
inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC;
- ufsi->i_lastfrag = DIRECT_FRAGMENT;
unlock_kernel();
mark_inode_dirty(inode);
- UFSD("EXIT\n");
+out:
+ UFSD("EXIT: err %d\n", err);
+ return err;
}
+
+
+/*
+ * We don't define our `inode->i_op->truncate', and call it here,
+ * because of:
+ * - there is no way to know old size
+ * - there is no way inform user about error, if it happens in `truncate'
+ */
+static int ufs_setattr(struct dentry *dentry, struct iattr *attr)
+{
+ struct inode *inode = dentry->d_inode;
+ unsigned int ia_valid = attr->ia_valid;
+ int error;
+
+ error = inode_change_ok(inode, attr);
+ if (error)
+ return error;
+
+ if (ia_valid & ATTR_SIZE &&
+ attr->ia_size != i_size_read(inode)) {
+ loff_t old_i_size = inode->i_size;
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ error = ufs_truncate(inode, old_i_size);
+ if (error)
+ return error;
+ }
+ return inode_setattr(inode, attr);
+}
+
+struct inode_operations ufs_file_inode_operations = {
+ .setattr = ufs_setattr,
+};
diff --git a/fs/ufs/util.c b/fs/ufs/util.c
index a2f13f4..337cf2c 100644
--- a/fs/ufs/util.c
+++ b/fs/ufs/util.c
@@ -233,3 +233,57 @@
else
ufsi->i_u1.i_data[0] = fs32;
}
+
+/**
+ * ufs_get_locked_page() - locate, pin and lock a pagecache page, if not exist
+ * read it from disk.
+ * @mapping: the address_space to search
+ * @index: the page index
+ *
+ * Locates the desired pagecache page, if not exist we'll read it,
+ * locks it, increments its reference
+ * count and returns its address.
+ *
+ */
+
+struct page *ufs_get_locked_page(struct address_space *mapping,
+ pgoff_t index)
+{
+ struct page *page;
+
+try_again:
+ page = find_lock_page(mapping, index);
+ if (!page) {
+ page = read_cache_page(mapping, index,
+ (filler_t*)mapping->a_ops->readpage,
+ NULL);
+ if (IS_ERR(page)) {
+ printk(KERN_ERR "ufs_change_blocknr: "
+ "read_cache_page error: ino %lu, index: %lu\n",
+ mapping->host->i_ino, index);
+ goto out;
+ }
+
+ lock_page(page);
+
+ if (!PageUptodate(page) || PageError(page)) {
+ unlock_page(page);
+ page_cache_release(page);
+
+ printk(KERN_ERR "ufs_change_blocknr: "
+ "can not read page: ino %lu, index: %lu\n",
+ mapping->host->i_ino, index);
+
+ page = ERR_PTR(-EIO);
+ goto out;
+ }
+ }
+
+ if (unlikely(!page->mapping || !page_has_buffers(page))) {
+ unlock_page(page);
+ page_cache_release(page);
+ goto try_again;/*we really need these buffers*/
+ }
+out:
+ return page;
+}
diff --git a/fs/ufs/util.h b/fs/ufs/util.h
index 406981f..28fce6c 100644
--- a/fs/ufs/util.h
+++ b/fs/ufs/util.h
@@ -251,6 +251,14 @@
#define ubh_memcpyubh(ubh,mem,size) _ubh_memcpyubh_(uspi,ubh,mem,size)
extern void _ubh_memcpyubh_(struct ufs_sb_private_info *, struct ufs_buffer_head *, unsigned char *, unsigned);
+/* This functions works with cache pages*/
+extern struct page *ufs_get_locked_page(struct address_space *mapping,
+ pgoff_t index);
+static inline void ufs_put_locked_page(struct page *page)
+{
+ unlock_page(page);
+ page_cache_release(page);
+}
/*
diff --git a/include/asm-alpha/floppy.h b/include/asm-alpha/floppy.h
index 21816d3..6a9f02a 100644
--- a/include/asm-alpha/floppy.h
+++ b/include/asm-alpha/floppy.h
@@ -26,7 +26,7 @@
#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
#define fd_cacheflush(addr,size) /* nothing */
#define fd_request_irq() request_irq(FLOPPY_IRQ, floppy_interrupt,\
- SA_INTERRUPT, "floppy", NULL)
+ IRQF_DISABLED, "floppy", NULL)
#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL);
#ifdef CONFIG_PCI
diff --git a/include/asm-alpha/signal.h b/include/asm-alpha/signal.h
index 1a2c52a..13c2305 100644
--- a/include/asm-alpha/signal.h
+++ b/include/asm-alpha/signal.h
@@ -77,7 +77,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -98,7 +97,6 @@
#define SA_ONESHOT SA_RESETHAND
#define SA_NOMASK SA_NODEFER
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
/*
* sigaltstack controls
diff --git a/include/asm-arm/arch-omap/board-fsample.h b/include/asm-arm/arch-omap/board-fsample.h
new file mode 100644
index 0000000..89a1e52
--- /dev/null
+++ b/include/asm-arm/arch-omap/board-fsample.h
@@ -0,0 +1,51 @@
+/*
+ * linux/include/asm-arm/arch-omap/board-fsample.h
+ *
+ * Board-specific goodies for TI F-Sample.
+ *
+ * Copyright (C) 2006 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
+#define __ASM_ARCH_OMAP_FSAMPLE_H
+
+/* fsample is pretty close to p2-sample */
+#include <asm/arch/board-perseus2.h>
+
+#define fsample_cpld_read(reg) __raw_readb(reg)
+#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
+
+#define FSAMPLE_CPLD_BASE 0xE8100000
+#define FSAMPLE_CPLD_SIZE SZ_4K
+#define FSAMPLE_CPLD_START 0x05080000
+
+#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00)
+#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04)
+#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
+#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
+
+#define FSAMPLE_CPLD_BIT_BT_RESET 0
+#define FSAMPLE_CPLD_BIT_LCD_RESET 1
+#define FSAMPLE_CPLD_BIT_CAM_PWDN 2
+#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3
+#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4
+#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5
+#define FSAMPLE_CPLD_BIT_BACKLIGHT 6
+#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7
+#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8
+#define FSAMPLE_CPLD_BIT_OTG_RESET 9
+
+#define fsample_cpld_set(bit) \
+ fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
+
+#define fsample_cpld_clear(bit) \
+ fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
+
+#endif
diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
index dfdbf06..edf1dc6 100644
--- a/include/asm-arm/arch-omap/board.h
+++ b/include/asm-arm/arch-omap/board.h
@@ -22,6 +22,7 @@
#define OMAP_TAG_UART 0x4f07
#define OMAP_TAG_FBMEM 0x4f08
#define OMAP_TAG_STI_CONSOLE 0x4f09
+#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
#define OMAP_TAG_BOOT_REASON 0x4f80
#define OMAP_TAG_FLASH_PART 0x4f81
@@ -61,6 +62,12 @@
u8 channel;
};
+struct omap_camera_sensor_config {
+ u16 reset_gpio;
+ int (*power_on)(void * data);
+ int (*power_off)(void * data);
+};
+
struct omap_usb_config {
/* Configure drivers according to the connectors on your board:
* - "A" connector (rectagular)
diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h
index ca12023..1b1b023 100644
--- a/include/asm-arm/arch-omap/dma.h
+++ b/include/asm-arm/arch-omap/dma.h
@@ -185,8 +185,8 @@
/* DMA channels for 24xx */
#define OMAP24XX_DMA_NO_DEVICE 0
#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */
-#define OMAP24XX_DMA_EXT_NDMA_REQ0 2 /* S_DMA_1 */
-#define OMAP24XX_DMA_EXT_NDMA_REQ1 3 /* S_DMA_2 */
+#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */
#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */
#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */
#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */
@@ -197,7 +197,9 @@
#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */
#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */
#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */
-
+#define OMAP24XX_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */
+#define OMAP24XX_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */
+#define OMAP24XX_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */
#define OMAP24XX_DMA_EAC_AC_RD 17 /* S_DMA_16 */
#define OMAP24XX_DMA_EAC_AC_WR 18 /* S_DMA_17 */
#define OMAP24XX_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */
@@ -244,6 +246,7 @@
#define OMAP24XX_DMA_MMC1_TX 61 /* SDMA_60 */
#define OMAP24XX_DMA_MMC1_RX 62 /* SDMA_61 */
#define OMAP24XX_DMA_MS 63 /* SDMA_62 */
+#define OMAP24XX_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */
/*----------------------------------------------------------------------------*/
@@ -274,7 +277,7 @@
#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea)
#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4)
-#define OMAP_DMA_TOUT_IRQ (1 << 0) /* Only on omap1 */
+#define OMAP1_DMA_TOUT_IRQ (1 << 0)
#define OMAP_DMA_DROP_IRQ (1 << 1)
#define OMAP_DMA_HALF_IRQ (1 << 2)
#define OMAP_DMA_FRAME_IRQ (1 << 3)
@@ -315,11 +318,11 @@
OMAP_LCD_DMA_B2_BOTTOM
};
-/* REVISIT: Check if BURST_4 is really 1 (or 2) */
enum omap_dma_burst_mode {
OMAP_DMA_DATA_BURST_DIS = 0,
OMAP_DMA_DATA_BURST_4,
- OMAP_DMA_DATA_BURST_8
+ OMAP_DMA_DATA_BURST_8,
+ OMAP_DMA_DATA_BURST_16,
};
enum omap_dma_color_mode {
diff --git a/include/asm-arm/arch-omap/dmtimer.h b/include/asm-arm/arch-omap/dmtimer.h
index e6522e6..7a289ff 100644
--- a/include/asm-arm/arch-omap/dmtimer.h
+++ b/include/asm-arm/arch-omap/dmtimer.h
@@ -5,6 +5,7 @@
*
* Copyright (C) 2005 Nokia Corporation
* Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * PWM and clock framwork support by Timo Teras.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -25,69 +26,56 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef __ASM_ARCH_TIMER_H
-#define __ASM_ARCH_TIMER_H
+#ifndef __ASM_ARCH_DMTIMER_H
+#define __ASM_ARCH_DMTIMER_H
-#include <linux/list.h>
-
-#define OMAP_TIMER_SRC_ARMXOR 0x00
-#define OMAP_TIMER_SRC_32_KHZ 0x01
-#define OMAP_TIMER_SRC_EXT_CLK 0x02
-
-/* timer control reg bits */
-#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13)
-#define OMAP_TIMER_CTRL_PT (1 << 12)
-#define OMAP_TIMER_CTRL_TRG_OVERFLOW (0x1 << 10)
-#define OMAP_TIMER_CTRL_TRG_OFANDMATCH (0x2 << 10)
-#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8)
-#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8)
-#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8)
-#define OMAP_TIMER_CTRL_SCPWM (1 << 7)
-#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */
-#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */
-#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* how much to shift the prescaler value */
-#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */
-#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */
+/* clock sources */
+#define OMAP_TIMER_SRC_SYS_CLK 0x00
+#define OMAP_TIMER_SRC_32_KHZ 0x01
+#define OMAP_TIMER_SRC_EXT_CLK 0x02
/* timer interrupt enable bits */
-#define OMAP_TIMER_INT_CAPTURE (1 << 2)
-#define OMAP_TIMER_INT_OVERFLOW (1 << 1)
-#define OMAP_TIMER_INT_MATCH (1 << 0)
+#define OMAP_TIMER_INT_CAPTURE (1 << 2)
+#define OMAP_TIMER_INT_OVERFLOW (1 << 1)
+#define OMAP_TIMER_INT_MATCH (1 << 0)
+/* trigger types */
+#define OMAP_TIMER_TRIGGER_NONE 0x00
+#define OMAP_TIMER_TRIGGER_OVERFLOW 0x01
+#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02
-struct omap_dm_timer {
- struct list_head timer_list;
+struct omap_dm_timer;
+struct clk;
- u32 base;
- unsigned int irq;
-};
+int omap_dm_timer_init(void);
-u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg);
-void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value);
-
-struct omap_dm_timer * omap_dm_timer_request(void);
+struct omap_dm_timer *omap_dm_timer_request(void);
+struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
void omap_dm_timer_free(struct omap_dm_timer *timer);
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
-void omap_dm_timer_set_trigger(struct omap_dm_timer *timer, unsigned int value);
-void omap_dm_timer_enable_compare(struct omap_dm_timer *timer);
-void omap_dm_timer_enable_autoreload(struct omap_dm_timer *timer);
+int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
+
+u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
void omap_dm_timer_trigger(struct omap_dm_timer *timer);
void omap_dm_timer_start(struct omap_dm_timer *timer);
void omap_dm_timer_stop(struct omap_dm_timer *timer);
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, unsigned int load);
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, unsigned int match);
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
+void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
+void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
+
+void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
-
unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
-void omap_dm_timer_reset_counter(struct omap_dm_timer *timer);
+void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
int omap_dm_timers_active(void);
-u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
-#endif /* __ASM_ARCH_TIMER_H */
+
+#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/include/asm-arm/arch-omap/gpmc.h b/include/asm-arm/arch-omap/gpmc.h
new file mode 100644
index 0000000..1a0a520
--- /dev/null
+++ b/include/asm-arm/arch-omap/gpmc.h
@@ -0,0 +1,91 @@
+/*
+ * General-Purpose Memory Controller for OMAP2
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_GPMC_H
+#define __OMAP2_GPMC_H
+
+#define GPMC_CS_CONFIG1 0x00
+#define GPMC_CS_CONFIG2 0x04
+#define GPMC_CS_CONFIG3 0x08
+#define GPMC_CS_CONFIG4 0x0c
+#define GPMC_CS_CONFIG5 0x10
+#define GPMC_CS_CONFIG6 0x14
+#define GPMC_CS_CONFIG7 0x18
+#define GPMC_CS_NAND_COMMAND 0x1c
+#define GPMC_CS_NAND_ADDRESS 0x20
+#define GPMC_CS_NAND_DATA 0x24
+
+#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
+#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 20)
+#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29)
+#define GPMC_CONFIG1_READTYPE_SYNC (1 << 29)
+#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27)
+#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27)
+#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
+#define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23)
+#define GPMC_CONFIG1_WAIT_READ_MON (1 << 22)
+#define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21)
+#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
+#define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16)
+#define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12)
+#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1)
+#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10)
+#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0)
+#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(1)
+#define GPMC_CONFIG1_MUXADDDATA (1 << 9)
+#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4)
+#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3)
+#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1))
+#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2))
+#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3))
+
+/*
+ * Note that all values in this struct are in nanoseconds, while
+ * the register values are in gpmc_fck cycles.
+ */
+struct gpmc_timings {
+ /* Minimum clock period for synchronous mode */
+ u16 sync_clk;
+
+ /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
+ u16 cs_on; /* Assertion time */
+ u16 cs_rd_off; /* Read deassertion time */
+ u16 cs_wr_off; /* Write deassertion time */
+
+ /* ADV signal timings corresponding to GPMC_CONFIG3 */
+ u16 adv_on; /* Assertion time */
+ u16 adv_rd_off; /* Read deassertion time */
+ u16 adv_wr_off; /* Write deassertion time */
+
+ /* WE signals timings corresponding to GPMC_CONFIG4 */
+ u16 we_on; /* WE assertion time */
+ u16 we_off; /* WE deassertion time */
+
+ /* OE signals timings corresponding to GPMC_CONFIG4 */
+ u16 oe_on; /* OE assertion time */
+ u16 oe_off; /* OE deassertion time */
+
+ /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
+ u16 page_burst_access; /* Multiple access word delay */
+ u16 access; /* Start-cycle to first data valid delay */
+ u16 rd_cycle; /* Total read cycle time */
+ u16 wr_cycle; /* Total write cycle time */
+};
+
+extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
+
+extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
+extern u32 gpmc_cs_read_reg(int cs, int idx);
+extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
+extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern unsigned long gpmc_cs_get_base_addr(int cs);
+
+
+#endif
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
index c7d9e85..481048d 100644
--- a/include/asm-arm/arch-omap/hardware.h
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -297,6 +297,10 @@
#include "board-perseus2.h"
#endif
+#ifdef CONFIG_MACH_OMAP_FSAMPLE
+#include "board-fsample.h"
+#endif
+
#ifdef CONFIG_MACH_OMAP_H3
#include "board-h3.h"
#endif
diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h
index 42098d9..2542495 100644
--- a/include/asm-arm/arch-omap/irqs.h
+++ b/include/asm-arm/arch-omap/irqs.h
@@ -242,10 +242,24 @@
#define INT_24XX_GPIO_BANK2 30
#define INT_24XX_GPIO_BANK3 31
#define INT_24XX_GPIO_BANK4 32
+#define INT_24XX_GPTIMER1 37
+#define INT_24XX_GPTIMER2 38
+#define INT_24XX_GPTIMER3 39
+#define INT_24XX_GPTIMER4 40
+#define INT_24XX_GPTIMER5 41
+#define INT_24XX_GPTIMER6 42
+#define INT_24XX_GPTIMER7 43
+#define INT_24XX_GPTIMER8 44
+#define INT_24XX_GPTIMER9 45
+#define INT_24XX_GPTIMER10 46
+#define INT_24XX_GPTIMER11 47
+#define INT_24XX_GPTIMER12 48
#define INT_24XX_MCBSP1_IRQ_TX 59
#define INT_24XX_MCBSP1_IRQ_RX 60
#define INT_24XX_MCBSP2_IRQ_TX 62
#define INT_24XX_MCBSP2_IRQ_RX 63
+#define INT_24XX_UART1_IRQ 72
+#define INT_24XX_UART2_IRQ 73
#define INT_24XX_UART3_IRQ 74
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
index 0dc24d4..679869c 100644
--- a/include/asm-arm/arch-omap/mux.h
+++ b/include/asm-arm/arch-omap/mux.h
@@ -410,6 +410,12 @@
/* 24xx clock */
W14_24XX_SYS_CLKOUT,
+ /* 24xx GPMC wait pin monitoring */
+ L3_GPMC_WAIT0,
+ N7_GPMC_WAIT1,
+ M1_GPMC_WAIT2,
+ P1_GPMC_WAIT3,
+
/* 242X McBSP */
Y15_24XX_MCBSP2_CLKX,
R14_24XX_MCBSP2_FSX,
@@ -429,6 +435,26 @@
M15_24XX_GPIO92,
V14_24XX_GPIO117,
+ /* 242x DBG GPIO */
+ V4_242X_GPIO49,
+ W2_242X_GPIO50,
+ U4_242X_GPIO51,
+ V3_242X_GPIO52,
+ V2_242X_GPIO53,
+ V6_242X_GPIO53,
+ T4_242X_GPIO54,
+ Y4_242X_GPIO54,
+ T3_242X_GPIO55,
+ U2_242X_GPIO56,
+
+ /* 24xx external DMA requests */
+ AA10_242X_DMAREQ0,
+ AA6_242X_DMAREQ1,
+ E4_242X_DMAREQ2,
+ G4_242X_DMAREQ3,
+ D3_242X_DMAREQ4,
+ E3_242X_DMAREQ5,
+
P20_24XX_TSC_IRQ,
/* UART3 */
diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h
index 05b003f..e46623c 100644
--- a/include/asm-arm/arch-omap/pm.h
+++ b/include/asm-arm/arch-omap/pm.h
@@ -299,10 +299,43 @@
OMAP24XX_SLEEP_SAVE_INTC_MIR0,
OMAP24XX_SLEEP_SAVE_INTC_MIR1,
OMAP24XX_SLEEP_SAVE_INTC_MIR2,
+
+ OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
+ OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
+ OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
+ OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
+
+ OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
+ OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
+ OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
+ OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
+ OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
+
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
+ OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
+
+ OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
+ OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
+ OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
+ OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
+
OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 9f83f4a..f5cc65d 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -1329,6 +1329,7 @@
#define GPIO84_NSRXD 84 /* NSSP receive */
#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */
#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */
+#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */
#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */
#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */
#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */
@@ -1471,6 +1472,7 @@
#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN)
#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT)
#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT)
+#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT)
#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT)
#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT)
#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT)
diff --git a/include/asm-arm/arch-pxa/trizeps4.h b/include/asm-arm/arch-pxa/trizeps4.h
new file mode 100644
index 0000000..641d0ec
--- /dev/null
+++ b/include/asm-arm/arch-pxa/trizeps4.h
@@ -0,0 +1,106 @@
+/************************************************************************
+ * Include file for TRIZEPS4 SoM and ConXS eval-board
+ * Copyright (c) Jürgen Schindele
+ * 2006
+ ************************************************************************/
+
+/*
+ * Includes/Defines
+ */
+#ifndef _TRIPEPS4_H_
+#define _TRIPEPS4_H_
+
+/* physical memory regions */
+#define TRIZEPS4_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */
+#define TRIZEPS4_DISK_PHYS (PXA_CS1_PHYS) /* Disk On Chip region */
+#define TRIZEPS4_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */
+#define TRIZEPS4_PIC_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board */
+#define TRIZEPS4_SDRAM_BASE 0xa0000000 /* SDRAM region */
+
+#define TRIZEPS4_CFSR_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board CSFR register */
+#define TRIZEPS4_BOCR_PHYS (PXA_CS3_PHYS+0x02000000) /* Logic chip on ConXS-Board BOCR register */
+#define TRIZEPS4_IRCR_PHYS (PXA_CS3_PHYS+0x02400000) /* Logic chip on ConXS-Board IRCR register*/
+#define TRIZEPS4_UPSR_PHYS (PXA_CS3_PHYS+0x02800000) /* Logic chip on ConXS-Board UPSR register*/
+#define TRIZEPS4_DICR_PHYS (PXA_CS3_PHYS+0x03800000) /* Logic chip on ConXS-Board DICR register*/
+
+/* virtual memory regions */
+#define TRIZEPS4_DISK_VIRT 0xF0000000 /* Disk On Chip region */
+
+#define TRIZEPS4_PIC_VIRT 0xF0100000 /* not used */
+#define TRIZEPS4_CFSR_VIRT 0xF0100000
+#define TRIZEPS4_BOCR_VIRT 0xF0200000
+#define TRIZEPS4_DICR_VIRT 0xF0300000
+#define TRIZEPS4_IRCR_VIRT 0xF0400000
+#define TRIZEPS4_UPSR_VIRT 0xF0500000
+
+/* size of flash */
+#define TRIZEPS4_FLASH_SIZE 0x02000000 /* Flash size 32 MB */
+
+/* Ethernet Controller Davicom DM9000 */
+#define GPIO_DM9000 101
+#define TRIZEPS4_ETH_IRQ IRQ_GPIO(GPIO_DM9000)
+
+/* UCB1400 audio / TS-controller */
+#define GPIO_UCB1400 1
+#define TRIZEPS4_UCB1400_IRQ IRQ_GPIO(GPIO_UCB1400)
+
+/* PCMCIA socket Compact Flash */
+#define GPIO_PCD 11 /* PCMCIA Card Detect */
+#define TRIZEPS4_CD_IRQ IRQ_GPIO(GPIO_PCD)
+#define GPIO_PRDY 13 /* READY / nINT */
+#define TRIZEPS4_READY_NINT IRQ_GPIO(GPIO_PRDY)
+
+/* MMC socket */
+#define GPIO_MMC_DET 12
+#define TRIZEPS4_MMC_IRQ IRQ_GPIO(GPIO_MMC_DET)
+
+/* LEDS using tx2 / rx2 */
+#define GPIO_SYS_BUSY_LED 46
+#define GPIO_HEARTBEAT_LED 47
+
+/* Off-module PIC on ConXS board */
+#define GPIO_PIC 0
+#define TRIZEPS4_PIC_IRQ IRQ_GPIO(GPIO_PIC)
+
+#define CFSR_P2V(x) ((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
+#define CFSR_V2P(x) ((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
+
+#define BCR_P2V(x) ((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
+#define BCR_V2P(x) ((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
+
+#define DCR_P2V(x) ((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
+#define DCR_V2P(x) ((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
+
+#ifndef __ASSEMBLY__
+#define ConXS_CFSR (*((volatile unsigned short *)CFSR_P2V(0x0C000000)))
+#define ConXS_BCR (*((volatile unsigned short *)BCR_P2V(0x0E000000)))
+#define ConXS_DCR (*((volatile unsigned short *)DCR_P2V(0x0F800000)))
+#else
+#define ConXS_CFSR CFSR_P2V(0x0C000000)
+#define ConXS_BCR BCR_P2V(0x0E000000)
+#define ConXS_DCR DCR_P2V(0x0F800000)
+#endif
+
+#define ConXS_CFSR_BVD_MASK 0x0003
+#define ConXS_CFSR_BVD1 (1 << 0)
+#define ConXS_CFSR_BVD2 (1 << 1)
+#define ConXS_CFSR_VS_MASK 0x000C
+#define ConXS_CFSR_VS1 (1 << 2)
+#define ConXS_CFSR_VS2 (1 << 3)
+#define ConXS_CFSR_VS_5V (0x3 << 2)
+#define ConXS_CFSR_VS_3V3 0x0
+
+#define ConXS_BCR_S0_POW_EN0 (1 << 0)
+#define ConXS_BCR_S0_POW_EN1 (1 << 1)
+#define ConXS_BCR_L_DISP (1 << 4)
+#define ConXS_BCR_CF_BUF_EN (1 << 5)
+#define ConXS_BCR_CF_RESET (1 << 7)
+#define ConXS_BCR_S0_VCC_3V3 0x1
+#define ConXS_BCR_S0_VCC_5V0 0x2
+#define ConXS_BCR_S0_VPP_12V 0x4
+#define ConXS_BCR_S0_VPP_3V3 0x8
+
+#define ConXS_IRCR_MODE (1 << 0)
+#define ConXS_IRCR_SD (1 << 1)
+
+#endif /* _TRIPEPS4_H_ */
diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h
index 94f973b7..91d536c 100644
--- a/include/asm-arm/memory.h
+++ b/include/asm-arm/memory.h
@@ -68,6 +68,11 @@
*/
#define XIP_VIRT_ADDR(physaddr) (MODULE_START + ((physaddr) & 0x000fffff))
+/*
+ * Allow 16MB-aligned ioremap pages
+ */
+#define IOREMAP_MAX_ORDER 24
+
#else /* CONFIG_MMU */
/*
diff --git a/include/asm-arm/mmu.h b/include/asm-arm/mmu.h
index 23dde52..fe2a23b 100644
--- a/include/asm-arm/mmu.h
+++ b/include/asm-arm/mmu.h
@@ -7,6 +7,7 @@
#if __LINUX_ARM_ARCH__ >= 6
unsigned int id;
#endif
+ unsigned int kvm_seq;
} mm_context_t;
#if __LINUX_ARM_ARCH__ >= 6
diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h
index 9fadb01..d1a65b1 100644
--- a/include/asm-arm/mmu_context.h
+++ b/include/asm-arm/mmu_context.h
@@ -17,6 +17,8 @@
#include <asm/cacheflush.h>
#include <asm/proc-fns.h>
+void __check_kvm_seq(struct mm_struct *mm);
+
#if __LINUX_ARM_ARCH__ >= 6
/*
@@ -45,13 +47,21 @@
{
if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
__new_context(mm);
+
+ if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
+ __check_kvm_seq(mm);
}
#define init_new_context(tsk,mm) (__init_new_context(tsk,mm),0)
#else
-#define check_context(mm) do { } while (0)
+static inline void check_context(struct mm_struct *mm)
+{
+ if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
+ __check_kvm_seq(mm);
+}
+
#define init_new_context(tsk,mm) 0
#endif
diff --git a/include/asm-arm/pgtable-hwdef.h b/include/asm-arm/pgtable-hwdef.h
index 1bc1f99..f3b5120 100644
--- a/include/asm-arm/pgtable-hwdef.h
+++ b/include/asm-arm/pgtable-hwdef.h
@@ -28,6 +28,7 @@
*/
#define PMD_SECT_BUFFERABLE (1 << 2)
#define PMD_SECT_CACHEABLE (1 << 3)
+#define PMD_SECT_XN (1 << 4) /* v6 */
#define PMD_SECT_AP_WRITE (1 << 10)
#define PMD_SECT_AP_READ (1 << 11)
#define PMD_SECT_TEX(x) ((x) << 12) /* v5 */
diff --git a/include/asm-arm/procinfo.h b/include/asm-arm/procinfo.h
index 8425260..edb7b65 100644
--- a/include/asm-arm/procinfo.h
+++ b/include/asm-arm/procinfo.h
@@ -29,7 +29,8 @@
struct proc_info_list {
unsigned int cpu_val;
unsigned int cpu_mask;
- unsigned long __cpu_mmu_flags; /* used by head.S */
+ unsigned long __cpu_mm_mmu_flags; /* used by head.S */
+ unsigned long __cpu_io_mmu_flags; /* used by head.S */
unsigned long __cpu_flush; /* used by head.S */
const char *arch_name;
const char *elf_name;
diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h
index 8a7554f..f28b236 100644
--- a/include/asm-arm/thread_info.h
+++ b/include/asm-arm/thread_info.h
@@ -111,6 +111,7 @@
extern void iwmmxt_task_copy(struct thread_info *, void *);
extern void iwmmxt_task_restore(struct thread_info *, void *);
extern void iwmmxt_task_release(struct thread_info *);
+extern void iwmmxt_task_switch(struct thread_info *);
#endif
diff --git a/include/asm-arm26/floppy.h b/include/asm-arm26/floppy.h
index a18af06..efb7321 100644
--- a/include/asm-arm26/floppy.h
+++ b/include/asm-arm26/floppy.h
@@ -22,7 +22,7 @@
#define fd_inb(port) inb((port))
#define fd_request_irq() request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
- SA_INTERRUPT,"floppy",NULL)
+ IRQF_DISABLED,"floppy",NULL)
#define fd_free_irq() free_irq(IRQ_FLOPPYDISK,NULL)
#define fd_disable_irq() disable_irq(IRQ_FLOPPYDISK)
#define fd_enable_irq() enable_irq(IRQ_FLOPPYDISK)
diff --git a/include/asm-arm26/signal.h b/include/asm-arm26/signal.h
index 37ad253..967ba49 100644
--- a/include/asm-arm26/signal.h
+++ b/include/asm-arm26/signal.h
@@ -82,7 +82,6 @@
* is running in 26-bit.
* SA_ONSTACK allows alternate signal stacks (see sigaltstack(2)).
* SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_NODEFER prevents the current signal from being masked in the handler.
* SA_RESETHAND clears the handler when the signal is delivered.
*
@@ -101,7 +100,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
/*
diff --git a/include/asm-cris/arch-v10/irq.h b/include/asm-cris/arch-v10/irq.h
index 4fa8945..b1128a9 100644
--- a/include/asm-cris/arch-v10/irq.h
+++ b/include/asm-cris/arch-v10/irq.h
@@ -141,7 +141,7 @@
* it here, we would not get the multiple_irq at all.
*
* The non-blocking here is based on the knowledge that the timer interrupt is
- * registred as a fast interrupt (SA_INTERRUPT) so that we _know_ there will not
+ * registred as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not
* be an sti() before the timer irq handler is run to acknowledge the interrupt.
*/
diff --git a/include/asm-cris/arch-v32/irq.h b/include/asm-cris/arch-v32/irq.h
index eeb0a80..bac94ee 100644
--- a/include/asm-cris/arch-v32/irq.h
+++ b/include/asm-cris/arch-v32/irq.h
@@ -98,7 +98,7 @@
* if we had BLOCK'edit here, we would not get the multiple_irq at all.
*
* The non-blocking here is based on the knowledge that the timer interrupt is
- * registred as a fast interrupt (SA_INTERRUPT) so that we _know_ there will not
+ * registred as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not
* be an sti() before the timer irq handler is run to acknowledge the interrupt.
*/
#define BUILD_TIMER_IRQ(nr, mask) \
diff --git a/include/asm-cris/signal.h b/include/asm-cris/signal.h
index dfe0395..349ae68 100644
--- a/include/asm-cris/signal.h
+++ b/include/asm-cris/signal.h
@@ -74,7 +74,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -95,7 +94,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000
diff --git a/include/asm-frv/irq-routing.h b/include/asm-frv/irq-routing.h
index 686fb2b..ac3ab90 100644
--- a/include/asm-frv/irq-routing.h
+++ b/include/asm-frv/irq-routing.h
@@ -51,7 +51,7 @@
struct irq_level {
int usage;
int disable_count;
- unsigned long flags; /* current SA_INTERRUPT and SA_SHIRQ settings */
+ unsigned long flags; /* current IRQF_DISABLED and IRQF_SHARED settings */
spinlock_t lock;
struct irq_source *sources;
};
diff --git a/include/asm-frv/signal.h b/include/asm-frv/signal.h
index dcc1b35..2079197 100644
--- a/include/asm-frv/signal.h
+++ b/include/asm-frv/signal.h
@@ -74,7 +74,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -94,7 +93,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000
diff --git a/include/asm-generic/audit_change_attr.h b/include/asm-generic/audit_change_attr.h
new file mode 100644
index 0000000..cb05bf6
--- /dev/null
+++ b/include/asm-generic/audit_change_attr.h
@@ -0,0 +1,18 @@
+__NR_chmod,
+__NR_fchmod,
+__NR_chown,
+__NR_fchown,
+__NR_lchown,
+__NR_setxattr,
+__NR_lsetxattr,
+__NR_fsetxattr,
+__NR_removexattr,
+__NR_lremovexattr,
+__NR_fremovexattr,
+__NR_fchownat,
+__NR_fchmodat,
+#ifdef __NR_chown32
+__NR_chown32,
+__NR_fchown32,
+__NR_lchown32,
+#endif
diff --git a/include/asm-generic/audit_dir_write.h b/include/asm-generic/audit_dir_write.h
new file mode 100644
index 0000000..161a7a5
--- /dev/null
+++ b/include/asm-generic/audit_dir_write.h
@@ -0,0 +1,14 @@
+__NR_rename,
+__NR_mkdir,
+__NR_rmdir,
+__NR_creat,
+__NR_link,
+__NR_unlink,
+__NR_symlink,
+__NR_mknod,
+__NR_mkdirat,
+__NR_mknodat,
+__NR_unlinkat,
+__NR_renameat,
+__NR_linkat,
+__NR_symlinkat,
diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h
index 0b49f9e..962cad7 100644
--- a/include/asm-generic/sections.h
+++ b/include/asm-generic/sections.h
@@ -14,5 +14,6 @@
extern char __per_cpu_start[], __per_cpu_end[];
extern char __kprobes_text_start[], __kprobes_text_end[];
extern char __initdata_begin[], __initdata_end[];
+extern char __start_rodata[], __end_rodata[];
#endif /* _ASM_GENERIC_SECTIONS_H_ */
diff --git a/include/asm-h8300/signal.h b/include/asm-h8300/signal.h
index 8eccdc1..7bc1504 100644
--- a/include/asm-h8300/signal.h
+++ b/include/asm-h8300/signal.h
@@ -74,7 +74,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -94,7 +93,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000
diff --git a/include/asm-i386/alternative.h b/include/asm-i386/alternative.h
index c61bd1a..96adbab 100644
--- a/include/asm-i386/alternative.h
+++ b/include/asm-i386/alternative.h
@@ -19,11 +19,19 @@
extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
struct module;
+#ifdef CONFIG_SMP
extern void alternatives_smp_module_add(struct module *mod, char *name,
void *locks, void *locks_end,
void *text, void *text_end);
extern void alternatives_smp_module_del(struct module *mod);
extern void alternatives_smp_switch(int smp);
+#else
+static inline void alternatives_smp_module_add(struct module *mod, char *name,
+ void *locks, void *locks_end,
+ void *text, void *text_end) {}
+static inline void alternatives_smp_module_del(struct module *mod) {}
+static inline void alternatives_smp_switch(int smp) {}
+#endif
#endif
diff --git a/include/asm-i386/floppy.h b/include/asm-i386/floppy.h
index 9cb2793..359ead6 100644
--- a/include/asm-i386/floppy.h
+++ b/include/asm-i386/floppy.h
@@ -144,11 +144,11 @@
static int fd_request_irq(void)
{
if(can_use_virtual_dma)
- return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
- "floppy", NULL);
+ return request_irq(FLOPPY_IRQ, floppy_hardint,
+ IRQF_DISABLED, "floppy", NULL);
else
- return request_irq(FLOPPY_IRQ, floppy_interrupt, SA_INTERRUPT,
- "floppy", NULL);
+ return request_irq(FLOPPY_IRQ, floppy_interrupt,
+ IRQF_DISABLED, "floppy", NULL);
}
diff --git a/include/asm-i386/signal.h b/include/asm-i386/signal.h
index 026fd23..3824a50 100644
--- a/include/asm-i386/signal.h
+++ b/include/asm-i386/signal.h
@@ -77,7 +77,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -97,7 +96,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000
diff --git a/include/asm-ia64/irq.h b/include/asm-ia64/irq.h
index 79479e2..8acb001 100644
--- a/include/asm-ia64/irq.h
+++ b/include/asm-ia64/irq.h
@@ -14,6 +14,8 @@
#define NR_IRQS 256
#define NR_IRQ_VECTORS NR_IRQS
+#define IRQF_PERCPU 0x02000000
+
static __inline__ int
irq_canonicalize (int irq)
{
diff --git a/include/asm-ia64/signal.h b/include/asm-ia64/signal.h
index 5e328ed..4f5ca56 100644
--- a/include/asm-ia64/signal.h
+++ b/include/asm-ia64/signal.h
@@ -56,7 +56,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons.
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -76,7 +75,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000
@@ -114,8 +112,6 @@
#define _NSIG_BPW 64
#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-#define SA_PERCPU_IRQ 0x02000000
-
#endif /* __KERNEL__ */
#include <asm-generic/signal.h>
diff --git a/include/asm-m32r/signal.h b/include/asm-m32r/signal.h
index 95f69b1..e750045 100644
--- a/include/asm-m32r/signal.h
+++ b/include/asm-m32r/signal.h
@@ -81,7 +81,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -101,7 +100,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000
diff --git a/include/asm-m68k/floppy.h b/include/asm-m68k/floppy.h
index 63a05ed..57f4fdd 100644
--- a/include/asm-m68k/floppy.h
+++ b/include/asm-m68k/floppy.h
@@ -88,8 +88,8 @@
static int fd_request_irq(void)
{
if(MACH_IS_Q40)
- return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
- "floppy", floppy_hardint);
+ return request_irq(FLOPPY_IRQ, floppy_hardint,
+ IRQF_DISABLED, "floppy", floppy_hardint);
else if(MACH_IS_SUN3X)
return sun3xflop_request_irq();
return -ENXIO;
diff --git a/include/asm-m68k/irq.h b/include/asm-m68k/irq.h
index f4ae7d8..3257f98 100644
--- a/include/asm-m68k/irq.h
+++ b/include/asm-m68k/irq.h
@@ -67,8 +67,8 @@
/*
* various flags for request_irq() - the Amiga now uses the standard
- * mechanism like all other architectures - SA_INTERRUPT and SA_SHIRQ
- * are your friends.
+ * mechanism like all other architectures - IRQF_DISABLED and
+ * IRQF_SHARED are your friends.
*/
#ifndef MACH_AMIGA_ONLY
#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */
diff --git a/include/asm-m68k/signal.h b/include/asm-m68k/signal.h
index 85037a3..de1ba6e 100644
--- a/include/asm-m68k/signal.h
+++ b/include/asm-m68k/signal.h
@@ -74,7 +74,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -94,7 +93,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
/*
* sigaltstack controls
diff --git a/include/asm-m68k/sun3xflop.h b/include/asm-m68k/sun3xflop.h
index 98a9f79..ca8cc41 100644
--- a/include/asm-m68k/sun3xflop.h
+++ b/include/asm-m68k/sun3xflop.h
@@ -208,7 +208,8 @@
if(!once) {
once = 1;
- error = request_irq(FLOPPY_IRQ, sun3xflop_hardint, SA_INTERRUPT, "floppy", NULL);
+ error = request_irq(FLOPPY_IRQ, sun3xflop_hardint,
+ IRQF_DISABLED, "floppy", NULL);
return ((error == 0) ? 0 : -1);
} else return 0;
}
diff --git a/include/asm-m68knommu/irq.h b/include/asm-m68knommu/irq.h
index 5355727..45e7a2fd 100644
--- a/include/asm-m68knommu/irq.h
+++ b/include/asm-m68knommu/irq.h
@@ -62,8 +62,8 @@
/*
* various flags for request_irq() - the Amiga now uses the standard
- * mechanism like all other architectures - SA_INTERRUPT and SA_SHIRQ
- * are your friends.
+ * mechanism like all other architectures - IRQF_DISABLED and
+ * IRQF_SHARED are your friends.
*/
#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */
#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */
diff --git a/include/asm-m68knommu/signal.h b/include/asm-m68knommu/signal.h
index 1d13187..216c08b 100644
--- a/include/asm-m68knommu/signal.h
+++ b/include/asm-m68knommu/signal.h
@@ -74,7 +74,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -94,7 +93,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
/*
* sigaltstack controls
diff --git a/include/asm-mips/mach-generic/floppy.h b/include/asm-mips/mach-generic/floppy.h
index 83cd69e..001a8ce 100644
--- a/include/asm-mips/mach-generic/floppy.h
+++ b/include/asm-mips/mach-generic/floppy.h
@@ -98,7 +98,7 @@
static inline int fd_request_irq(void)
{
return request_irq(FLOPPY_IRQ, floppy_interrupt,
- SA_INTERRUPT, "floppy", NULL);
+ IRQF_DISABLED, "floppy", NULL);
}
static inline void fd_free_irq(void)
diff --git a/include/asm-mips/mach-jazz/floppy.h b/include/asm-mips/mach-jazz/floppy.h
index 9413117..56e9ca6 100644
--- a/include/asm-mips/mach-jazz/floppy.h
+++ b/include/asm-mips/mach-jazz/floppy.h
@@ -90,7 +90,7 @@
static inline int fd_request_irq(void)
{
return request_irq(FLOPPY_IRQ, floppy_interrupt,
- SA_INTERRUPT, "floppy", NULL);
+ IRQF_DISABLED, "floppy", NULL);
}
static inline void fd_free_irq(void)
diff --git a/include/asm-mips/signal.h b/include/asm-mips/signal.h
index a1f3a3f..87a1dff 100644
--- a/include/asm-mips/signal.h
+++ b/include/asm-mips/signal.h
@@ -64,7 +64,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -84,7 +83,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000 /* Only for o32 */
@@ -99,15 +97,6 @@
#ifdef __KERNEL__
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ flag is for shared interrupt support on PCI and EISA.
- */
-#define SA_SAMPLE_RANDOM SA_RESTART
-
#ifdef CONFIG_TRAD_SIGNALS
#define sig_uses_siginfo(ka) ((ka)->sa.sa_flags & SA_SIGINFO)
#else
diff --git a/include/asm-parisc/floppy.h b/include/asm-parisc/floppy.h
index 458cdb2..da2f9c1 100644
--- a/include/asm-parisc/floppy.h
+++ b/include/asm-parisc/floppy.h
@@ -156,11 +156,11 @@
static int fd_request_irq(void)
{
if(can_use_virtual_dma)
- return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
- "floppy", NULL);
+ return request_irq(FLOPPY_IRQ, floppy_hardint,
+ IRQF_DISABLED, "floppy", NULL);
else
- return request_irq(FLOPPY_IRQ, floppy_interrupt, SA_INTERRUPT,
- "floppy", NULL);
+ return request_irq(FLOPPY_IRQ, floppy_interrupt,
+ IRQF_DISABLED, "floppy", NULL);
}
static unsigned long dma_mem_alloc(unsigned long size)
diff --git a/include/asm-parisc/signal.h b/include/asm-parisc/signal.h
index 25cb23e..98a82fa 100644
--- a/include/asm-parisc/signal.h
+++ b/include/asm-parisc/signal.h
@@ -48,7 +48,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -69,7 +68,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000 /* obsolete -- ignored */
diff --git a/include/asm-powerpc/floppy.h b/include/asm-powerpc/floppy.h
index 9c8d91b..fd242a2 100644
--- a/include/asm-powerpc/floppy.h
+++ b/include/asm-powerpc/floppy.h
@@ -27,7 +27,7 @@
#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
#define fd_cacheflush(addr,size) /* nothing */
#define fd_request_irq() request_irq(FLOPPY_IRQ, floppy_interrupt, \
- SA_INTERRUPT, "floppy", NULL)
+ IRQF_DISABLED, "floppy", NULL)
#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL);
#ifdef CONFIG_PCI
diff --git a/include/asm-powerpc/signal.h b/include/asm-powerpc/signal.h
index a4d8f86..a8c7bab 100644
--- a/include/asm-powerpc/signal.h
+++ b/include/asm-powerpc/signal.h
@@ -63,7 +63,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK is not currently supported, but will allow sigaltstack(2).
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -83,7 +82,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000u /* dummy -- ignored */
#define SA_RESTORER 0x04000000U
diff --git a/include/asm-ppc/floppy.h b/include/asm-ppc/floppy.h
index 2ba191e..d3963ca 100644
--- a/include/asm-ppc/floppy.h
+++ b/include/asm-ppc/floppy.h
@@ -96,11 +96,11 @@
static int fd_request_irq(void)
{
if (can_use_virtual_dma)
- return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
- "floppy", NULL);
+ return request_irq(FLOPPY_IRQ, floppy_hardint,
+ IRQF_DISABLED, "floppy", NULL);
else
- return request_irq(FLOPPY_IRQ, floppy_interrupt, SA_INTERRUPT,
- "floppy", NULL);
+ return request_irq(FLOPPY_IRQ, floppy_interrupt,
+ IRQF_DISABLED, "floppy", NULL);
}
static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
diff --git a/include/asm-s390/signal.h b/include/asm-s390/signal.h
index 7084626..f6cfddb 100644
--- a/include/asm-s390/signal.h
+++ b/include/asm-s390/signal.h
@@ -84,7 +84,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -104,7 +103,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000
diff --git a/include/asm-sh/floppy.h b/include/asm-sh/floppy.h
index 307d9ce..dc1ad46 100644
--- a/include/asm-sh/floppy.h
+++ b/include/asm-sh/floppy.h
@@ -146,12 +146,11 @@
static int fd_request_irq(void)
{
if(can_use_virtual_dma)
- return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
- "floppy", NULL);
+ return request_irq(FLOPPY_IRQ, floppy_hardint,
+ IRQF_DISABLED, "floppy", NULL);
else
- return request_irq(FLOPPY_IRQ, floppy_interrupt, SA_INTERRUPT,
- "floppy", NULL);
-
+ return request_irq(FLOPPY_IRQ, floppy_interrupt,
+ IRQF_DISABLED, "floppy", NULL);
}
static unsigned long dma_mem_alloc(unsigned long size)
diff --git a/include/asm-sh/mpc1211/keyboard.h b/include/asm-sh/mpc1211/keyboard.h
index 5f0b908..71ef4cf 100644
--- a/include/asm-sh/mpc1211/keyboard.h
+++ b/include/asm-sh/mpc1211/keyboard.h
@@ -57,7 +57,7 @@
#define AUX_IRQ 12
#define aux_request_irq(hand, dev_id) \
- request_irq(AUX_IRQ, hand, SA_SHIRQ, "PS2 Mouse", dev_id)
+ request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id)
#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
diff --git a/include/asm-sh/signal.h b/include/asm-sh/signal.h
index d6e8eb0..5c5c1e8 100644
--- a/include/asm-sh/signal.h
+++ b/include/asm-sh/signal.h
@@ -75,7 +75,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -95,7 +94,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000
diff --git a/include/asm-sh64/keyboard.h b/include/asm-sh64/keyboard.h
index 733e2bb..1fab96d 100644
--- a/include/asm-sh64/keyboard.h
+++ b/include/asm-sh64/keyboard.h
@@ -65,7 +65,7 @@
#endif
#define aux_request_irq(hand, dev_id) \
- request_irq(AUX_IRQ, hand, SA_SHIRQ, "PS2 Mouse", dev_id)
+ request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id)
#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
diff --git a/include/asm-sh64/signal.h b/include/asm-sh64/signal.h
index 2400dc6..a5a2820 100644
--- a/include/asm-sh64/signal.h
+++ b/include/asm-sh64/signal.h
@@ -74,7 +74,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -94,7 +93,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000
diff --git a/include/asm-sparc/floppy.h b/include/asm-sparc/floppy.h
index 7a941b8..c53b332 100644
--- a/include/asm-sparc/floppy.h
+++ b/include/asm-sparc/floppy.h
@@ -271,7 +271,8 @@
if(!once) {
once = 1;
- error = request_fast_irq(FLOPPY_IRQ, floppy_hardint, SA_INTERRUPT, "floppy");
+ error = request_fast_irq(FLOPPY_IRQ, floppy_hardint,
+ IRQF_DISABLED, "floppy");
return ((error == 0) ? 0 : -1);
} else return 0;
}
diff --git a/include/asm-sparc/signal.h b/include/asm-sparc/signal.h
index aa9960a..0ae5084 100644
--- a/include/asm-sparc/signal.h
+++ b/include/asm-sparc/signal.h
@@ -132,16 +132,13 @@
* usage of signal stacks by using the (now obsolete) sa_restorer field in
* the sigaction structure as a stack pointer. This is now possible due to
* the changes in signal handling. LBT 010493.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_SHIRQ flag is for shared interrupt support on PCI and EISA.
*/
#define SA_NOCLDSTOP _SV_IGNCHILD
#define SA_STACK _SV_SSTACK
#define SA_ONSTACK _SV_SSTACK
#define SA_RESTART _SV_INTR
#define SA_ONESHOT _SV_RESET
-#define SA_INTERRUPT 0x10u
#define SA_NOMASK 0x20u
#define SA_NOCLDWAIT 0x100u
#define SA_SIGINFO 0x200u
diff --git a/include/asm-sparc64/floppy.h b/include/asm-sparc64/floppy.h
index b591d0e..abf1500 100644
--- a/include/asm-sparc64/floppy.h
+++ b/include/asm-sparc64/floppy.h
@@ -267,7 +267,7 @@
once = 1;
error = request_irq(FLOPPY_IRQ, sparc_floppy_irq,
- SA_INTERRUPT, "floppy", NULL);
+ IRQF_DISABLED, "floppy", NULL);
return ((error == 0) ? 0 : -1);
}
diff --git a/include/asm-sparc64/signal.h b/include/asm-sparc64/signal.h
index fdc42a1..99688711 100644
--- a/include/asm-sparc64/signal.h
+++ b/include/asm-sparc64/signal.h
@@ -133,16 +133,13 @@
* usage of signal stacks by using the (now obsolete) sa_restorer field in
* the sigaction structure as a stack pointer. This is now possible due to
* the changes in signal handling. LBT 010493.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_SHIRQ flag is for shared interrupt support on PCI and EISA.
*/
#define SA_NOCLDSTOP _SV_IGNCHILD
#define SA_STACK _SV_SSTACK
#define SA_ONSTACK _SV_SSTACK
#define SA_RESTART _SV_INTR
#define SA_ONESHOT _SV_RESET
-#define SA_INTERRUPT 0x10u
#define SA_NOMASK 0x20u
#define SA_NOCLDWAIT 0x100u
#define SA_SIGINFO 0x200u
diff --git a/include/asm-um/kmap_types.h b/include/asm-um/kmap_types.h
index 0b22ad7..6c03acd 100644
--- a/include/asm-um/kmap_types.h
+++ b/include/asm-um/kmap_types.h
@@ -6,6 +6,24 @@
#ifndef __UM_KMAP_TYPES_H
#define __UM_KMAP_TYPES_H
-#include "asm/arch/kmap_types.h"
+/* No more #include "asm/arch/kmap_types.h" ! */
+
+enum km_type {
+ KM_BOUNCE_READ,
+ KM_SKB_SUNRPC_DATA,
+ KM_SKB_DATA_SOFTIRQ,
+ KM_USER0,
+ KM_USER1,
+ KM_UML_USERCOPY, /* UML specific, for copy_*_user - used in do_op_one_page */
+ KM_BIO_SRC_IRQ,
+ KM_BIO_DST_IRQ,
+ KM_PTE0,
+ KM_PTE1,
+ KM_IRQ0,
+ KM_IRQ1,
+ KM_SOFTIRQ0,
+ KM_SOFTIRQ1,
+ KM_TYPE_NR
+};
#endif
diff --git a/include/asm-v850/signal.h b/include/asm-v850/signal.h
index cb52caa..a38df08 100644
--- a/include/asm-v850/signal.h
+++ b/include/asm-v850/signal.h
@@ -77,7 +77,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -97,7 +96,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000
diff --git a/include/asm-x86_64/alternative.h b/include/asm-x86_64/alternative.h
index 387c8f6..aa67bfd 100644
--- a/include/asm-x86_64/alternative.h
+++ b/include/asm-x86_64/alternative.h
@@ -17,11 +17,20 @@
extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
struct module;
+
+#ifdef CONFIG_SMP
extern void alternatives_smp_module_add(struct module *mod, char *name,
void *locks, void *locks_end,
void *text, void *text_end);
extern void alternatives_smp_module_del(struct module *mod);
extern void alternatives_smp_switch(int smp);
+#else
+static inline void alternatives_smp_module_add(struct module *mod, char *name,
+ void *locks, void *locks_end,
+ void *text, void *text_end) {}
+static inline void alternatives_smp_module_del(struct module *mod) {}
+static inline void alternatives_smp_switch(int smp) {}
+#endif
#endif
diff --git a/include/asm-x86_64/floppy.h b/include/asm-x86_64/floppy.h
index 006291e..32ff5d13 100644
--- a/include/asm-x86_64/floppy.h
+++ b/include/asm-x86_64/floppy.h
@@ -144,11 +144,11 @@
static int fd_request_irq(void)
{
if(can_use_virtual_dma)
- return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
- "floppy", NULL);
+ return request_irq(FLOPPY_IRQ, floppy_hardint,
+ IRQF_DISABLED, "floppy", NULL);
else
- return request_irq(FLOPPY_IRQ, floppy_interrupt, SA_INTERRUPT,
- "floppy", NULL);
+ return request_irq(FLOPPY_IRQ, floppy_interrupt,
+ IRQF_DISABLED, "floppy", NULL);
}
static unsigned long dma_mem_alloc(unsigned long size)
diff --git a/include/asm-x86_64/signal.h b/include/asm-x86_64/signal.h
index f8d5579..cef7a7d 100644
--- a/include/asm-x86_64/signal.h
+++ b/include/asm-x86_64/signal.h
@@ -83,7 +83,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -103,7 +102,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000
diff --git a/include/asm-xtensa/signal.h b/include/asm-xtensa/signal.h
index a99c9ae..633ba73 100644
--- a/include/asm-xtensa/signal.h
+++ b/include/asm-xtensa/signal.h
@@ -75,7 +75,6 @@
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -95,7 +94,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000
@@ -109,19 +107,6 @@
#define SIGSTKSZ 8192
#ifndef __ASSEMBLY__
-#ifdef __KERNEL__
-
-/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- */
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#define SA_PROBEIRQ 0x08000000
-#endif
#define SIG_BLOCK 0 /* for blocking signals */
#define SIG_UNBLOCK 1 /* for unblocking signals */
diff --git a/include/linux/audit.h b/include/linux/audit.h
index e051ff9..b27d7de 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -122,10 +122,17 @@
/* Rule structure sizes -- if these change, different AUDIT_ADD and
* AUDIT_LIST commands must be implemented. */
#define AUDIT_MAX_FIELDS 64
+#define AUDIT_MAX_KEY_LEN 32
#define AUDIT_BITMASK_SIZE 64
#define AUDIT_WORD(nr) ((__u32)((nr)/32))
#define AUDIT_BIT(nr) (1 << ((nr) - AUDIT_WORD(nr)*32))
+#define AUDIT_SYSCALL_CLASSES 16
+#define AUDIT_CLASS_DIR_WRITE 0
+#define AUDIT_CLASS_DIR_WRITE_32 1
+#define AUDIT_CLASS_CHATTR 2
+#define AUDIT_CLASS_CHATTR_32 3
+
/* This bitmask is used to validate user input. It represents all bits that
* are currently used in an audit field constant understood by the kernel.
* If you are adding a new #define AUDIT_<whatever>, please ensure that
@@ -150,12 +157,17 @@
#define AUDIT_PERS 10
#define AUDIT_ARCH 11
#define AUDIT_MSGTYPE 12
-#define AUDIT_SE_USER 13 /* security label user */
-#define AUDIT_SE_ROLE 14 /* security label role */
-#define AUDIT_SE_TYPE 15 /* security label type */
-#define AUDIT_SE_SEN 16 /* security label sensitivity label */
-#define AUDIT_SE_CLR 17 /* security label clearance label */
+#define AUDIT_SUBJ_USER 13 /* security label user */
+#define AUDIT_SUBJ_ROLE 14 /* security label role */
+#define AUDIT_SUBJ_TYPE 15 /* security label type */
+#define AUDIT_SUBJ_SEN 16 /* security label sensitivity label */
+#define AUDIT_SUBJ_CLR 17 /* security label clearance label */
#define AUDIT_PPID 18
+#define AUDIT_OBJ_USER 19
+#define AUDIT_OBJ_ROLE 20
+#define AUDIT_OBJ_TYPE 21
+#define AUDIT_OBJ_LEV_LOW 22
+#define AUDIT_OBJ_LEV_HIGH 23
/* These are ONLY useful when checking
* at syscall exit time (AUDIT_AT_EXIT). */
@@ -171,6 +183,8 @@
#define AUDIT_ARG2 (AUDIT_ARG0+2)
#define AUDIT_ARG3 (AUDIT_ARG0+3)
+#define AUDIT_FILTERKEY 210
+
#define AUDIT_NEGATE 0x80000000
/* These are the supported operators.
@@ -299,6 +313,7 @@
#define AUDITSC_SUCCESS 1
#define AUDITSC_FAILURE 2
#define AUDITSC_RESULT(x) ( ((long)(x))<0?AUDITSC_FAILURE:AUDITSC_SUCCESS )
+extern int __init audit_register_class(int class, unsigned *list);
#ifdef CONFIG_AUDITSYSCALL
/* These are defined in auditsc.c */
/* Public API */
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index a3caf68..44a11f1 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -87,9 +87,9 @@
#define lock_cpu_hotplug() do { } while (0)
#define unlock_cpu_hotplug() do { } while (0)
#define lock_cpu_hotplug_interruptible() 0
-#define hotcpu_notifier(fn, pri)
-#define register_hotcpu_notifier(nb)
-#define unregister_hotcpu_notifier(nb)
+#define hotcpu_notifier(fn, pri) do { } while (0)
+#define register_hotcpu_notifier(nb) do { } while (0)
+#define unregister_hotcpu_notifier(nb) do { } while (0)
/* CPUs don't go offline once they're online w/o CONFIG_HOTPLUG_CPU */
static inline int cpu_is_offline(int cpu) { return 0; }
diff --git a/include/linux/err.h b/include/linux/err.h
index ff71d2a..cd3b367 100644
--- a/include/linux/err.h
+++ b/include/linux/err.h
@@ -13,7 +13,9 @@
* This should be a per-architecture thing, to allow different
* error and pointer decisions.
*/
-#define IS_ERR_VALUE(x) unlikely((x) > (unsigned long)-1000L)
+#define MAX_ERRNO 4095
+
+#define IS_ERR_VALUE(x) unlikely((x) >= (unsigned long)-MAX_ERRNO)
static inline void *ERR_PTR(long error)
{
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index db2a63a..cf682a7 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -14,6 +14,53 @@
#include <asm/ptrace.h>
#include <asm/system.h>
+/*
+ * These correspond to the IORESOURCE_IRQ_* defines in
+ * linux/ioport.h to select the interrupt line behaviour. When
+ * requesting an interrupt without specifying a IRQF_TRIGGER, the
+ * setting should be assumed to be "as already configured", which
+ * may be as per machine or firmware initialisation.
+ */
+#define IRQF_TRIGGER_NONE 0x00000000
+#define IRQF_TRIGGER_RISING 0x00000001
+#define IRQF_TRIGGER_FALLING 0x00000002
+#define IRQF_TRIGGER_HIGH 0x00000004
+#define IRQF_TRIGGER_LOW 0x00000008
+#define IRQF_TRIGGER_MASK (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
+#define IRQF_TRIGGER_PROBE 0x00000010
+
+/*
+ * These flags used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * IRQF_DISABLED - keep irqs disabled when calling the action handler
+ * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
+ * IRQF_SHARED - allow sharing the irq among several devices
+ * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
+ * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
+ */
+#define IRQF_DISABLED 0x00000020
+#define IRQF_SAMPLE_RANDOM 0x00000040
+#define IRQF_SHARED 0x00000080
+#define IRQF_PROBE_SHARED 0x00000100
+#define IRQF_TIMER 0x00000200
+
+/*
+ * Migration helpers. Scheduled for removal in 1/2007
+ * Do not use for new code !
+ */
+#define SA_INTERRUPT IRQF_DISABLED
+#define SA_SAMPLE_RANDOM IRQF_SAMPLE_RANDOM
+#define SA_SHIRQ IRQF_SHARED
+#define SA_PROBEIRQ IRQF_PROBE_SHARED
+
+#define SA_TRIGGER_LOW IRQF_TRIGGER_LOW
+#define SA_TRIGGER_HIGH IRQF_TRIGGER_HIGH
+#define SA_TRIGGER_FALLING IRQF_TRIGGER_FALLING
+#define SA_TRIGGER_RISING IRQF_TRIGGER_RISING
+#define SA_TRIGGER_MASK IRQF_TRIGGER_MASK
+
struct irqaction {
irqreturn_t (*handler)(int, void *, struct pt_regs *);
unsigned long flags;
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 00b6ef8..95d7aa7 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -24,41 +24,40 @@
/*
* IRQ line status.
+ *
+ * Bits 0-16 are reserved for the IRQF_* bits in linux/interrupt.h
+ *
+ * IRQ types
*/
-#define IRQ_INPROGRESS 1 /* IRQ handler active - do not enter! */
-#define IRQ_DISABLED 2 /* IRQ disabled - do not enter! */
-#define IRQ_PENDING 4 /* IRQ pending - replay on enable */
-#define IRQ_REPLAY 8 /* IRQ has been replayed but not acked yet */
-#define IRQ_AUTODETECT 16 /* IRQ is being autodetected */
-#define IRQ_WAITING 32 /* IRQ not yet seen - for autodetection */
-#define IRQ_LEVEL 64 /* IRQ level triggered */
-#define IRQ_MASKED 128 /* IRQ masked - shouldn't be seen again */
+#define IRQ_TYPE_NONE 0x00000000 /* Default, unspecified type */
+#define IRQ_TYPE_EDGE_RISING 0x00000001 /* Edge rising type */
+#define IRQ_TYPE_EDGE_FALLING 0x00000002 /* Edge falling type */
+#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
+#define IRQ_TYPE_LEVEL_HIGH 0x00000004 /* Level high type */
+#define IRQ_TYPE_LEVEL_LOW 0x00000008 /* Level low type */
+#define IRQ_TYPE_SENSE_MASK 0x0000000f /* Mask of the above */
+#define IRQ_TYPE_PROBE 0x00000010 /* Probing in progress */
+
+/* Internal flags */
+#define IRQ_INPROGRESS 0x00010000 /* IRQ handler active - do not enter! */
+#define IRQ_DISABLED 0x00020000 /* IRQ disabled - do not enter! */
+#define IRQ_PENDING 0x00040000 /* IRQ pending - replay on enable */
+#define IRQ_REPLAY 0x00080000 /* IRQ has been replayed but not acked yet */
+#define IRQ_AUTODETECT 0x00100000 /* IRQ is being autodetected */
+#define IRQ_WAITING 0x00200000 /* IRQ not yet seen - for autodetection */
+#define IRQ_LEVEL 0x00400000 /* IRQ level triggered */
+#define IRQ_MASKED 0x00800000 /* IRQ masked - shouldn't be seen again */
#ifdef CONFIG_IRQ_PER_CPU
-# define IRQ_PER_CPU 256 /* IRQ is per CPU */
+# define IRQ_PER_CPU 0x01000000 /* IRQ is per CPU */
# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
#else
# define CHECK_IRQ_PER_CPU(var) 0
#endif
-#define IRQ_NOPROBE 512 /* IRQ is not valid for probing */
-#define IRQ_NOREQUEST 1024 /* IRQ cannot be requested */
-#define IRQ_NOAUTOEN 2048 /* IRQ will not be enabled on request irq */
-#define IRQ_DELAYED_DISABLE \
- 4096 /* IRQ disable (masking) happens delayed. */
-
-/*
- * IRQ types, see also include/linux/interrupt.h
- */
-#define IRQ_TYPE_NONE 0x0000 /* Default, unspecified type */
-#define IRQ_TYPE_EDGE_RISING 0x0001 /* Edge rising type */
-#define IRQ_TYPE_EDGE_FALLING 0x0002 /* Edge falling type */
-#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
-#define IRQ_TYPE_LEVEL_HIGH 0x0004 /* Level high type */
-#define IRQ_TYPE_LEVEL_LOW 0x0008 /* Level low type */
-#define IRQ_TYPE_SENSE_MASK 0x000f /* Mask of the above */
-#define IRQ_TYPE_SIMPLE 0x0010 /* Simple type */
-#define IRQ_TYPE_PERCPU 0x0020 /* Per CPU type */
-#define IRQ_TYPE_PROBE 0x0040 /* Probing in progress */
+#define IRQ_NOPROBE 0x02000000 /* IRQ is not valid for probing */
+#define IRQ_NOREQUEST 0x04000000 /* IRQ cannot be requested */
+#define IRQ_NOAUTOEN 0x08000000 /* IRQ will not be enabled on request irq */
+#define IRQ_DELAYED_DISABLE 0x10000000 /* IRQ disable (masking) happens delayed. */
struct proc_dir_entry;
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 1e4ce72..117135e 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -9,32 +9,6 @@
#include <linux/spinlock.h>
/*
- * These values of sa_flags are used only by the kernel as part of the
- * irq handling routines.
- *
- * SA_INTERRUPT is also used by the irq handling routines.
- * SA_SHIRQ is for shared interrupt support on PCI and EISA.
- * SA_PROBEIRQ is set by callers when they expect sharing mismatches to occur
- */
-#define SA_SAMPLE_RANDOM SA_RESTART
-#define SA_SHIRQ 0x04000000
-#define SA_PROBEIRQ 0x08000000
-
-/*
- * As above, these correspond to the IORESOURCE_IRQ_* defines in
- * linux/ioport.h to select the interrupt line behaviour. When
- * requesting an interrupt without specifying a SA_TRIGGER, the
- * setting should be assumed to be "as already configured", which
- * may be as per machine or firmware initialisation.
- */
-#define SA_TRIGGER_LOW 0x00000008
-#define SA_TRIGGER_HIGH 0x00000004
-#define SA_TRIGGER_FALLING 0x00000002
-#define SA_TRIGGER_RISING 0x00000001
-#define SA_TRIGGER_MASK (SA_TRIGGER_HIGH|SA_TRIGGER_LOW|\
- SA_TRIGGER_RISING|SA_TRIGGER_FALLING)
-
-/*
* Real Time signals may be queued.
*/
diff --git a/include/linux/ufs_fs.h b/include/linux/ufs_fs.h
index e39b7cc..fc62887 100644
--- a/include/linux/ufs_fs.h
+++ b/include/linux/ufs_fs.h
@@ -993,7 +993,7 @@
extern struct inode_operations ufs_fast_symlink_inode_operations;
/* truncate.c */
-extern void ufs_truncate (struct inode *);
+extern int ufs_truncate (struct inode *, loff_t);
static inline struct ufs_sb_info *UFS_SB(struct super_block *sb)
{
diff --git a/include/net/irda/irda_device.h b/include/net/irda/irda_device.h
index 0575c59..bca19ca 100644
--- a/include/net/irda/irda_device.h
+++ b/include/net/irda/irda_device.h
@@ -160,7 +160,7 @@
int irq, irq2; /* Interrupts used */
int dma, dma2; /* DMA channel(s) used */
int fifo_size; /* FIFO size */
- int irqflags; /* interrupt flags (ie, SA_SHIRQ|SA_INTERRUPT) */
+ int irqflags; /* interrupt flags (ie, IRQF_SHARED|IRQF_DISABLED) */
int direction; /* Link direction, used by some FIR drivers */
int enabled; /* Powered on? */
int suspended; /* Suspended by APM */
diff --git a/include/sound/initval.h b/include/sound/initval.h
index d45170b..2ae76ef 100644
--- a/include/sound/initval.h
+++ b/include/sound/initval.h
@@ -62,7 +62,7 @@
{
while (*irq_table != -1) {
if (!request_irq(*irq_table, snd_legacy_empty_irq_handler,
- SA_INTERRUPT | SA_PROBEIRQ, "ALSA Test IRQ",
+ IRQF_DISABLED | IRQF_PROBE_SHARED, "ALSA Test IRQ",
(void *) irq_table)) {
free_irq(*irq_table, (void *) irq_table);
return *irq_table;
diff --git a/kernel/audit.h b/kernel/audit.h
index 8323e41..6aa33b8 100644
--- a/kernel/audit.h
+++ b/kernel/audit.h
@@ -81,6 +81,7 @@
u32 mask[AUDIT_BITMASK_SIZE];
u32 buflen; /* for data alloc on list rules */
u32 field_count;
+ char *filterkey; /* ties events to rules */
struct audit_field *fields;
struct audit_field *inode_f; /* quick access to an inode field */
struct audit_watch *watch; /* associated watch */
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index 4c99d2c..5b4e162 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -141,6 +141,7 @@
selinux_audit_rule_free(f->se_rule);
}
kfree(e->rule.fields);
+ kfree(e->rule.filterkey);
kfree(e);
}
@@ -278,6 +279,29 @@
return 0;
}
+static __u32 *classes[AUDIT_SYSCALL_CLASSES];
+
+int __init audit_register_class(int class, unsigned *list)
+{
+ __u32 *p = kzalloc(AUDIT_BITMASK_SIZE * sizeof(__u32), GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+ while (*list != ~0U) {
+ unsigned n = *list++;
+ if (n >= AUDIT_BITMASK_SIZE * 32 - AUDIT_SYSCALL_CLASSES) {
+ kfree(p);
+ return -EINVAL;
+ }
+ p[AUDIT_WORD(n)] |= AUDIT_BIT(n);
+ }
+ if (class >= AUDIT_SYSCALL_CLASSES || classes[class]) {
+ kfree(p);
+ return -EINVAL;
+ }
+ classes[class] = p;
+ return 0;
+}
+
/* Common user-space to kernel rule translation. */
static inline struct audit_entry *audit_to_entry_common(struct audit_rule *rule)
{
@@ -321,6 +345,22 @@
for (i = 0; i < AUDIT_BITMASK_SIZE; i++)
entry->rule.mask[i] = rule->mask[i];
+ for (i = 0; i < AUDIT_SYSCALL_CLASSES; i++) {
+ int bit = AUDIT_BITMASK_SIZE * 32 - i - 1;
+ __u32 *p = &entry->rule.mask[AUDIT_WORD(bit)];
+ __u32 *class;
+
+ if (!(*p & AUDIT_BIT(bit)))
+ continue;
+ *p &= ~AUDIT_BIT(bit);
+ class = classes[i];
+ if (class) {
+ int j;
+ for (j = 0; j < AUDIT_BITMASK_SIZE; j++)
+ entry->rule.mask[j] |= class[j];
+ }
+ }
+
return entry;
exit_err:
@@ -469,11 +509,16 @@
case AUDIT_ARG2:
case AUDIT_ARG3:
break;
- case AUDIT_SE_USER:
- case AUDIT_SE_ROLE:
- case AUDIT_SE_TYPE:
- case AUDIT_SE_SEN:
- case AUDIT_SE_CLR:
+ case AUDIT_SUBJ_USER:
+ case AUDIT_SUBJ_ROLE:
+ case AUDIT_SUBJ_TYPE:
+ case AUDIT_SUBJ_SEN:
+ case AUDIT_SUBJ_CLR:
+ case AUDIT_OBJ_USER:
+ case AUDIT_OBJ_ROLE:
+ case AUDIT_OBJ_TYPE:
+ case AUDIT_OBJ_LEV_LOW:
+ case AUDIT_OBJ_LEV_HIGH:
str = audit_unpack_string(&bufp, &remain, f->val);
if (IS_ERR(str))
goto exit_free;
@@ -511,6 +556,16 @@
if (err)
goto exit_free;
break;
+ case AUDIT_FILTERKEY:
+ err = -EINVAL;
+ if (entry->rule.filterkey || f->val > AUDIT_MAX_KEY_LEN)
+ goto exit_free;
+ str = audit_unpack_string(&bufp, &remain, f->val);
+ if (IS_ERR(str))
+ goto exit_free;
+ entry->rule.buflen += f->val;
+ entry->rule.filterkey = str;
+ break;
default:
goto exit_free;
}
@@ -600,11 +655,16 @@
data->fields[i] = f->type;
data->fieldflags[i] = f->op;
switch(f->type) {
- case AUDIT_SE_USER:
- case AUDIT_SE_ROLE:
- case AUDIT_SE_TYPE:
- case AUDIT_SE_SEN:
- case AUDIT_SE_CLR:
+ case AUDIT_SUBJ_USER:
+ case AUDIT_SUBJ_ROLE:
+ case AUDIT_SUBJ_TYPE:
+ case AUDIT_SUBJ_SEN:
+ case AUDIT_SUBJ_CLR:
+ case AUDIT_OBJ_USER:
+ case AUDIT_OBJ_ROLE:
+ case AUDIT_OBJ_TYPE:
+ case AUDIT_OBJ_LEV_LOW:
+ case AUDIT_OBJ_LEV_HIGH:
data->buflen += data->values[i] =
audit_pack_string(&bufp, f->se_str);
break;
@@ -612,6 +672,10 @@
data->buflen += data->values[i] =
audit_pack_string(&bufp, krule->watch->path);
break;
+ case AUDIT_FILTERKEY:
+ data->buflen += data->values[i] =
+ audit_pack_string(&bufp, krule->filterkey);
+ break;
default:
data->values[i] = f->val;
}
@@ -639,11 +703,16 @@
return 1;
switch(a->fields[i].type) {
- case AUDIT_SE_USER:
- case AUDIT_SE_ROLE:
- case AUDIT_SE_TYPE:
- case AUDIT_SE_SEN:
- case AUDIT_SE_CLR:
+ case AUDIT_SUBJ_USER:
+ case AUDIT_SUBJ_ROLE:
+ case AUDIT_SUBJ_TYPE:
+ case AUDIT_SUBJ_SEN:
+ case AUDIT_SUBJ_CLR:
+ case AUDIT_OBJ_USER:
+ case AUDIT_OBJ_ROLE:
+ case AUDIT_OBJ_TYPE:
+ case AUDIT_OBJ_LEV_LOW:
+ case AUDIT_OBJ_LEV_HIGH:
if (strcmp(a->fields[i].se_str, b->fields[i].se_str))
return 1;
break;
@@ -651,6 +720,11 @@
if (strcmp(a->watch->path, b->watch->path))
return 1;
break;
+ case AUDIT_FILTERKEY:
+ /* both filterkeys exist based on above type compare */
+ if (strcmp(a->filterkey, b->filterkey))
+ return 1;
+ break;
default:
if (a->fields[i].val != b->fields[i].val)
return 1;
@@ -730,6 +804,7 @@
u32 fcount = old->field_count;
struct audit_entry *entry;
struct audit_krule *new;
+ char *fk;
int i, err = 0;
entry = audit_init_entry(fcount);
@@ -753,13 +828,25 @@
* the originals will all be freed when the old rule is freed. */
for (i = 0; i < fcount; i++) {
switch (new->fields[i].type) {
- case AUDIT_SE_USER:
- case AUDIT_SE_ROLE:
- case AUDIT_SE_TYPE:
- case AUDIT_SE_SEN:
- case AUDIT_SE_CLR:
+ case AUDIT_SUBJ_USER:
+ case AUDIT_SUBJ_ROLE:
+ case AUDIT_SUBJ_TYPE:
+ case AUDIT_SUBJ_SEN:
+ case AUDIT_SUBJ_CLR:
+ case AUDIT_OBJ_USER:
+ case AUDIT_OBJ_ROLE:
+ case AUDIT_OBJ_TYPE:
+ case AUDIT_OBJ_LEV_LOW:
+ case AUDIT_OBJ_LEV_HIGH:
err = audit_dupe_selinux_field(&new->fields[i],
&old->fields[i]);
+ break;
+ case AUDIT_FILTERKEY:
+ fk = kstrdup(old->filterkey, GFP_KERNEL);
+ if (unlikely(!fk))
+ err = -ENOMEM;
+ else
+ new->filterkey = fk;
}
if (err) {
audit_free_rule(entry);
@@ -1245,6 +1332,34 @@
skb_queue_tail(q, skb);
}
+/* Log rule additions and removals */
+static void audit_log_rule_change(uid_t loginuid, u32 sid, char *action,
+ struct audit_krule *rule, int res)
+{
+ struct audit_buffer *ab;
+
+ ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE);
+ if (!ab)
+ return;
+ audit_log_format(ab, "auid=%u", loginuid);
+ if (sid) {
+ char *ctx = NULL;
+ u32 len;
+ if (selinux_ctxid_to_string(sid, &ctx, &len))
+ audit_log_format(ab, " ssid=%u", sid);
+ else
+ audit_log_format(ab, " subj=%s", ctx);
+ kfree(ctx);
+ }
+ audit_log_format(ab, " %s rule key=", action);
+ if (rule->filterkey)
+ audit_log_untrustedstring(ab, rule->filterkey);
+ else
+ audit_log_format(ab, "(null)");
+ audit_log_format(ab, " list=%d res=%d", rule->listnr, res);
+ audit_log_end(ab);
+}
+
/**
* audit_receive_filter - apply all rules to the specified message type
* @type: audit message type
@@ -1304,24 +1419,7 @@
err = audit_add_rule(entry,
&audit_filter_list[entry->rule.listnr]);
-
- if (sid) {
- char *ctx = NULL;
- u32 len;
- if (selinux_ctxid_to_string(sid, &ctx, &len)) {
- /* Maybe call audit_panic? */
- audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
- "auid=%u ssid=%u add rule to list=%d res=%d",
- loginuid, sid, entry->rule.listnr, !err);
- } else
- audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
- "auid=%u subj=%s add rule to list=%d res=%d",
- loginuid, ctx, entry->rule.listnr, !err);
- kfree(ctx);
- } else
- audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
- "auid=%u add rule to list=%d res=%d",
- loginuid, entry->rule.listnr, !err);
+ audit_log_rule_change(loginuid, sid, "add", &entry->rule, !err);
if (err)
audit_free_rule(entry);
@@ -1337,24 +1435,8 @@
err = audit_del_rule(entry,
&audit_filter_list[entry->rule.listnr]);
-
- if (sid) {
- char *ctx = NULL;
- u32 len;
- if (selinux_ctxid_to_string(sid, &ctx, &len)) {
- /* Maybe call audit_panic? */
- audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
- "auid=%u ssid=%u remove rule from list=%d res=%d",
- loginuid, sid, entry->rule.listnr, !err);
- } else
- audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
- "auid=%u subj=%s remove rule from list=%d res=%d",
- loginuid, ctx, entry->rule.listnr, !err);
- kfree(ctx);
- } else
- audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
- "auid=%u remove rule from list=%d res=%d",
- loginuid, entry->rule.listnr, !err);
+ audit_log_rule_change(loginuid, sid, "remove", &entry->rule,
+ !err);
audit_free_rule(entry);
break;
@@ -1514,11 +1596,16 @@
for (i = 0; i < rule->field_count; i++) {
struct audit_field *f = &rule->fields[i];
switch (f->type) {
- case AUDIT_SE_USER:
- case AUDIT_SE_ROLE:
- case AUDIT_SE_TYPE:
- case AUDIT_SE_SEN:
- case AUDIT_SE_CLR:
+ case AUDIT_SUBJ_USER:
+ case AUDIT_SUBJ_ROLE:
+ case AUDIT_SUBJ_TYPE:
+ case AUDIT_SUBJ_SEN:
+ case AUDIT_SUBJ_CLR:
+ case AUDIT_OBJ_USER:
+ case AUDIT_OBJ_ROLE:
+ case AUDIT_OBJ_TYPE:
+ case AUDIT_OBJ_LEV_LOW:
+ case AUDIT_OBJ_LEV_HIGH:
return 1;
}
}
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index dc5e3f0..ae40ac8 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -186,6 +186,7 @@
int auditable; /* 1 if record should be written */
int name_count;
struct audit_names names[AUDIT_NAMES];
+ char * filterkey; /* key for rule that triggered record */
struct dentry * pwd;
struct vfsmount * pwdmnt;
struct audit_context *previous; /* For nested syscalls */
@@ -320,11 +321,11 @@
if (ctx)
result = audit_comparator(ctx->loginuid, f->op, f->val);
break;
- case AUDIT_SE_USER:
- case AUDIT_SE_ROLE:
- case AUDIT_SE_TYPE:
- case AUDIT_SE_SEN:
- case AUDIT_SE_CLR:
+ case AUDIT_SUBJ_USER:
+ case AUDIT_SUBJ_ROLE:
+ case AUDIT_SUBJ_TYPE:
+ case AUDIT_SUBJ_SEN:
+ case AUDIT_SUBJ_CLR:
/* NOTE: this may return negative values indicating
a temporary error. We simply treat this as a
match for now to avoid losing information that
@@ -341,6 +342,46 @@
ctx);
}
break;
+ case AUDIT_OBJ_USER:
+ case AUDIT_OBJ_ROLE:
+ case AUDIT_OBJ_TYPE:
+ case AUDIT_OBJ_LEV_LOW:
+ case AUDIT_OBJ_LEV_HIGH:
+ /* The above note for AUDIT_SUBJ_USER...AUDIT_SUBJ_CLR
+ also applies here */
+ if (f->se_rule) {
+ /* Find files that match */
+ if (name) {
+ result = selinux_audit_rule_match(
+ name->osid, f->type, f->op,
+ f->se_rule, ctx);
+ } else if (ctx) {
+ for (j = 0; j < ctx->name_count; j++) {
+ if (selinux_audit_rule_match(
+ ctx->names[j].osid,
+ f->type, f->op,
+ f->se_rule, ctx)) {
+ ++result;
+ break;
+ }
+ }
+ }
+ /* Find ipc objects that match */
+ if (ctx) {
+ struct audit_aux_data *aux;
+ for (aux = ctx->aux; aux;
+ aux = aux->next) {
+ if (aux->type == AUDIT_IPC) {
+ struct audit_aux_data_ipcctl *axi = (void *)aux;
+ if (selinux_audit_rule_match(axi->osid, f->type, f->op, f->se_rule, ctx)) {
+ ++result;
+ break;
+ }
+ }
+ }
+ }
+ }
+ break;
case AUDIT_ARG0:
case AUDIT_ARG1:
case AUDIT_ARG2:
@@ -348,11 +389,17 @@
if (ctx)
result = audit_comparator(ctx->argv[f->type-AUDIT_ARG0], f->op, f->val);
break;
+ case AUDIT_FILTERKEY:
+ /* ignore this field for filtering */
+ result = 1;
+ break;
}
if (!result)
return 0;
}
+ if (rule->filterkey)
+ ctx->filterkey = kstrdup(rule->filterkey, GFP_ATOMIC);
switch (rule->action) {
case AUDIT_NEVER: *state = AUDIT_DISABLED; break;
case AUDIT_ALWAYS: *state = AUDIT_RECORD_CONTEXT; break;
@@ -627,6 +674,7 @@
}
audit_free_names(context);
audit_free_aux(context);
+ kfree(context->filterkey);
kfree(context);
context = previous;
} while (context);
@@ -735,6 +783,11 @@
context->euid, context->suid, context->fsuid,
context->egid, context->sgid, context->fsgid, tty);
audit_log_task_info(ab, tsk);
+ if (context->filterkey) {
+ audit_log_format(ab, " key=");
+ audit_log_untrustedstring(ab, context->filterkey);
+ } else
+ audit_log_format(ab, " key=(null)");
audit_log_end(ab);
for (aux = context->aux; aux; aux = aux->next) {
@@ -1060,6 +1113,8 @@
} else {
audit_free_names(context);
audit_free_aux(context);
+ kfree(context->filterkey);
+ context->filterkey = NULL;
tsk->audit_context = context;
}
}
diff --git a/kernel/futex.c b/kernel/futex.c
index 6c91f93..15caf93 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -630,8 +630,10 @@
list_for_each_entry_safe(this, next, head, list) {
if (match_futex (&this->key, &key)) {
- if (this->pi_state)
- return -EINVAL;
+ if (this->pi_state) {
+ ret = -EINVAL;
+ break;
+ }
wake_futex(this);
if (++ret >= nr_wake)
break;
@@ -1208,7 +1210,7 @@
}
down_read(&curr->mm->mmap_sem);
- hb = queue_lock(&q, -1, NULL);
+ spin_lock(q.lock_ptr);
/*
* Got the lock. We might not be the anticipated owner if we
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index e71266c..6d8b301 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -142,7 +142,7 @@
}
#endif
- if (!(action->flags & SA_INTERRUPT))
+ if (!(action->flags & IRQF_DISABLED))
local_irq_enable();
do {
@@ -153,7 +153,7 @@
action = action->next;
} while (action);
- if (status & SA_SAMPLE_RANDOM)
+ if (status & IRQF_SAMPLE_RANDOM)
add_interrupt_randomness(irq);
local_irq_disable();
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index b7117e8..fede5fa 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -114,7 +114,7 @@
spin_lock_irqsave(&desc->lock, flags);
switch (desc->depth) {
case 0:
- printk(KERN_WARNING "Unablanced enable_irq(%d)\n", irq);
+ printk(KERN_WARNING "Unbalanced enable for IRQ %d\n", irq);
WARN_ON(1);
break;
case 1: {
@@ -167,7 +167,7 @@
action = irq_desc[irq].action;
if (action)
- if (irqflags & action->flags & SA_SHIRQ)
+ if (irqflags & action->flags & IRQF_SHARED)
action = NULL;
return !action;
@@ -205,7 +205,7 @@
* so we have to be careful not to interfere with a
* running system.
*/
- if (new->flags & SA_SAMPLE_RANDOM) {
+ if (new->flags & IRQF_SAMPLE_RANDOM) {
/*
* This function might sleep, we want to call it first,
* outside of the atomic block.
@@ -227,16 +227,17 @@
/*
* Can't share interrupts unless both agree to and are
* the same type (level, edge, polarity). So both flag
- * fields must have SA_SHIRQ set and the bits which
+ * fields must have IRQF_SHARED set and the bits which
* set the trigger type must match.
*/
- if (!((old->flags & new->flags) & SA_SHIRQ) ||
- ((old->flags ^ new->flags) & SA_TRIGGER_MASK))
+ if (!((old->flags & new->flags) & IRQF_SHARED) ||
+ ((old->flags ^ new->flags) & IRQF_TRIGGER_MASK))
goto mismatch;
-#if defined(CONFIG_IRQ_PER_CPU) && defined(SA_PERCPU_IRQ)
+#if defined(CONFIG_IRQ_PER_CPU) && defined(IRQF_PERCPU)
/* All handlers must agree on per-cpuness */
- if ((old->flags & IRQ_PER_CPU) != (new->flags & IRQ_PER_CPU))
+ if ((old->flags & IRQF_PERCPU) !=
+ (new->flags & IRQF_PERCPU))
goto mismatch;
#endif
@@ -249,26 +250,27 @@
}
*p = new;
-#if defined(CONFIG_IRQ_PER_CPU) && defined(SA_PERCPU_IRQ)
- if (new->flags & SA_PERCPU_IRQ)
+#if defined(CONFIG_IRQ_PER_CPU) && defined(IRQF_PERCPU)
+ if (new->flags & IRQF_PERCPU)
desc->status |= IRQ_PER_CPU;
#endif
if (!shared) {
irq_chip_set_defaults(desc->chip);
/* Setup the type (level, edge polarity) if configured: */
- if (new->flags & SA_TRIGGER_MASK) {
+ if (new->flags & IRQF_TRIGGER_MASK) {
if (desc->chip && desc->chip->set_type)
desc->chip->set_type(irq,
- new->flags & SA_TRIGGER_MASK);
+ new->flags & IRQF_TRIGGER_MASK);
else
/*
- * SA_TRIGGER_* but the PIC does not support
+ * IRQF_TRIGGER_* but the PIC does not support
* multiple flow-types?
*/
- printk(KERN_WARNING "setup_irq(%d) SA_TRIGGER"
- "set. No set_type function available\n",
- irq);
+ printk(KERN_WARNING "No IRQF_TRIGGER set_type "
+ "function for IRQ %d (%s)\n", irq,
+ desc->chip ? desc->chip->name :
+ "unknown");
} else
compat_irq_chip_set_default_handler(desc);
@@ -297,8 +299,8 @@
mismatch:
spin_unlock_irqrestore(&desc->lock, flags);
- if (!(new->flags & SA_PROBEIRQ)) {
- printk(KERN_ERR "%s: irq handler mismatch\n", __FUNCTION__);
+ if (!(new->flags & IRQF_PROBE_SHARED)) {
+ printk(KERN_ERR "IRQ handler type mismatch for IRQ %d\n", irq);
dump_stack();
}
return -EBUSY;
@@ -365,7 +367,7 @@
kfree(action);
return;
}
- printk(KERN_ERR "Trying to free free IRQ%d\n", irq);
+ printk(KERN_ERR "Trying to free already-free IRQ %d\n", irq);
spin_unlock_irqrestore(&desc->lock, flags);
return;
}
@@ -396,9 +398,9 @@
*
* Flags:
*
- * SA_SHIRQ Interrupt is shared
- * SA_INTERRUPT Disable local interrupts while processing
- * SA_SAMPLE_RANDOM The interrupt can be used for entropy
+ * IRQF_SHARED Interrupt is shared
+ * IRQF_DISABLED Disable local interrupts while processing
+ * IRQF_SAMPLE_RANDOM The interrupt can be used for entropy
*
*/
int request_irq(unsigned int irq,
@@ -414,7 +416,7 @@
* which interrupt is which (messes up the interrupt freeing
* logic etc).
*/
- if ((irqflags & SA_SHIRQ) && !dev_id)
+ if ((irqflags & IRQF_SHARED) && !dev_id)
return -EINVAL;
if (irq >= NR_IRQS)
return -EINVAL;
diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c
index b483dee..417e980 100644
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -36,7 +36,7 @@
* Already running: If it is shared get the other
* CPU to go looking for our mystery interrupt too
*/
- if (desc->action && (desc->action->flags & SA_SHIRQ))
+ if (desc->action && (desc->action->flags & IRQF_SHARED))
desc->status |= IRQ_PENDING;
spin_unlock(&desc->lock);
continue;
@@ -48,7 +48,7 @@
while (action) {
/* Only shared IRQ handlers are safe to call */
- if (action->flags & SA_SHIRQ) {
+ if (action->flags & IRQF_SHARED) {
if (action->handler(i, action->dev_id, regs) ==
IRQ_HANDLED)
ok = 1;
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index b0d067b..2180c88 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -13,6 +13,10 @@
depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
###
+# filename of target with directory and extension stripped
+basetarget = $(basename $(notdir $@))
+
+###
# Escape single quote for use in echo statements
escsq = $(subst $(squote),'\$(squote)',$1)
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 02a7eea..3cb445c 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -117,7 +117,7 @@
$(obj-m) : quiet_modtag := [M]
# Default for not multi-part modules
-modname = $(*F)
+modname = $(basetarget)
$(multi-objs-m) : modname = $(modname-multi)
$(multi-objs-m:.o=.i) : modname = $(modname-multi)
diff --git a/scripts/Makefile.host b/scripts/Makefile.host
index 2b066d1..18ecd4d 100644
--- a/scripts/Makefile.host
+++ b/scripts/Makefile.host
@@ -80,8 +80,10 @@
#####
# Handle options to gcc. Support building with separate output directory
-_hostc_flags = $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) $(HOSTCFLAGS_$(*F).o)
-_hostcxx_flags = $(HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) $(HOSTCXXFLAGS_$(*F).o)
+_hostc_flags = $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) \
+ $(HOSTCFLAGS_$(basetarget).o)
+_hostcxx_flags = $(HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) \
+ $(HOSTCXXFLAGS_$(basetarget).o)
ifeq ($(KBUILD_SRC),)
__hostc_flags = $(_hostc_flags)
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 2cb4935..fc498fe 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -82,12 +82,12 @@
# than one module. In that case KBUILD_MODNAME will be set to foo_bar,
# where foo and bar are the name of the modules.
name-fix = $(subst $(comma),_,$(subst -,_,$1))
-basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(*F)))"
+basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
modname_flags = $(if $(filter 1,$(words $(modname))),\
-D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")
-_c_flags = $(CFLAGS) $(EXTRA_CFLAGS) $(CFLAGS_$(*F).o)
-_a_flags = $(AFLAGS) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
+_c_flags = $(CFLAGS) $(EXTRA_CFLAGS) $(CFLAGS_$(basetarget).o)
+_a_flags = $(AFLAGS) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
_cpp_flags = $(CPPFLAGS) $(EXTRA_CPPFLAGS) $(CPPFLAGS_$(@F))
# If building the kernel in a separate objtree expand all occurrences
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index 576cce5..a495502 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -72,7 +72,7 @@
# Step 5), compile all *.mod.c files
# modname is set to make c_flags define KBUILD_MODNAME
-modname = $(*F)
+modname = $(notdir $(@:.mod.o=))
quiet_cmd_cc_o_c = CC $@
cmd_cc_o_c = $(CC) $(c_flags) $(CFLAGS_MODULE) \
diff --git a/scripts/kconfig/lxdialog/checklist.c b/scripts/kconfig/lxdialog/checklist.c
index be0200e..7988641 100644
--- a/scripts/kconfig/lxdialog/checklist.c
+++ b/scripts/kconfig/lxdialog/checklist.c
@@ -187,9 +187,12 @@
/* Print the list */
for (i = 0; i < max_choice; i++) {
- print_item(list, items[(scroll + i) * 3 + 1],
- status[i + scroll], i, i == choice);
+ if (i != choice)
+ print_item(list, items[(scroll + i) * 3 + 1],
+ status[i + scroll], i, 0);
}
+ print_item(list, items[(scroll + choice) * 3 + 1],
+ status[choice + scroll], choice, 1);
print_arrows(dialog, choice, item_no, scroll,
box_y, box_x + check_x + 5, list_height);
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 00e2129..f9460a6 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1056,7 +1056,8 @@
# pointer-to-function
print ".BI \" ".$1."\" ".$parameter." \") (".$2.")"."\"\n;\n";
} elsif ($type =~ m/^(.*?)\s*(:.*)/) {
- print ".BI \" ".$1."\" ".$parameter.$2." \""."\"\n;\n";
+ # bitfield
+ print ".BI \" ".$1."\ \" ".$parameter.$2." \""."\"\n;\n";
} else {
$type =~ s/([^\*])$/$1 /;
print ".BI \" ".$type."\" ".$parameter." \""."\"\n;\n";
@@ -1118,7 +1119,10 @@
my %args = %{$_[0]};
my ($parameter, $section);
- print "Function:\n\n";
+ print "Name:\n\n";
+ print $args{'function'}." - ".$args{'purpose'}."\n";
+
+ print "\nSynopsis:\n\n";
my $start=$args{'functiontype'}." ".$args{'function'}." (";
print $start;
my $count = 0;
@@ -1169,6 +1173,7 @@
my $count;
print "Enum:\n\n";
+ print "enum ".$args{'enum'}." - ".$args{'purpose'}."\n\n";
print "enum ".$args{'enum'}." {\n";
$count = 0;
foreach $parameter (@{$args{'parameterlist'}}) {
@@ -1197,7 +1202,7 @@
my $count;
print "Typedef:\n\n";
- print "typedef ".$args{'typedef'}."\n";
+ print "typedef ".$args{'typedef'}." - ".$args{'purpose'}."\n";
output_section_text(@_);
}
@@ -1206,7 +1211,7 @@
my %args = %{$_[0]};
my ($parameter);
- print $args{'type'}." ".$args{'struct'}.":\n\n";
+ print $args{'type'}." ".$args{'struct'}." - ".$args{'purpose'}."\n\n";
print $args{'type'}." ".$args{'struct'}." {\n";
foreach $parameter (@{$args{'parameterlist'}}) {
if ($parameter =~ /^#/) {
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 0dd1617..dfde0e8 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -24,7 +24,10 @@
/* If we are modposting external module set to 1 */
static int external_module = 0;
/* How a symbol is exported */
-enum export {export_plain, export_gpl, export_gpl_future, export_unknown};
+enum export {
+ export_plain, export_unused, export_gpl,
+ export_unused_gpl, export_gpl_future, export_unknown
+};
void fatal(const char *fmt, ...)
{
@@ -191,7 +194,9 @@
enum export export;
} export_list[] = {
{ .str = "EXPORT_SYMBOL", .export = export_plain },
+ { .str = "EXPORT_UNUSED_SYMBOL", .export = export_unused },
{ .str = "EXPORT_SYMBOL_GPL", .export = export_gpl },
+ { .str = "EXPORT_UNUSED_SYMBOL_GPL", .export = export_unused_gpl },
{ .str = "EXPORT_SYMBOL_GPL_FUTURE", .export = export_gpl_future },
{ .str = "(unknown)", .export = export_unknown },
};
@@ -205,6 +210,8 @@
static enum export export_no(const char * s)
{
int i;
+ if (!s)
+ return export_unknown;
for (i = 0; export_list[i].export != export_unknown; i++) {
if (strcmp(export_list[i].str, s) == 0)
return export_list[i].export;
@@ -216,8 +223,12 @@
{
if (sec == elf->export_sec)
return export_plain;
+ else if (sec == elf->export_unused_sec)
+ return export_unused;
else if (sec == elf->export_gpl_sec)
return export_gpl;
+ else if (sec == elf->export_unused_gpl_sec)
+ return export_unused_gpl;
else if (sec == elf->export_gpl_future_sec)
return export_gpl_future;
else
@@ -366,8 +377,12 @@
info->modinfo_len = sechdrs[i].sh_size;
} else if (strcmp(secname, "__ksymtab") == 0)
info->export_sec = i;
+ else if (strcmp(secname, "__ksymtab_unused") == 0)
+ info->export_unused_sec = i;
else if (strcmp(secname, "__ksymtab_gpl") == 0)
info->export_gpl_sec = i;
+ else if (strcmp(secname, "__ksymtab_unused_gpl") == 0)
+ info->export_unused_gpl_sec = i;
else if (strcmp(secname, "__ksymtab_gpl_future") == 0)
info->export_gpl_future_sec = i;
@@ -1085,38 +1100,64 @@
buf->pos += len;
}
-void check_license(struct module *mod)
+static void check_for_gpl_usage(enum export exp, const char *m, const char *s)
+{
+ const char *e = is_vmlinux(m) ?"":".ko";
+
+ switch (exp) {
+ case export_gpl:
+ fatal("modpost: GPL-incompatible module %s%s "
+ "uses GPL-only symbol '%s'\n", m, e, s);
+ break;
+ case export_unused_gpl:
+ fatal("modpost: GPL-incompatible module %s%s "
+ "uses GPL-only symbol marked UNUSED '%s'\n", m, e, s);
+ break;
+ case export_gpl_future:
+ warn("modpost: GPL-incompatible module %s%s "
+ "uses future GPL-only symbol '%s'\n", m, e, s);
+ break;
+ case export_plain:
+ case export_unused:
+ case export_unknown:
+ /* ignore */
+ break;
+ }
+}
+
+static void check_for_unused(enum export exp, const char* m, const char* s)
+{
+ const char *e = is_vmlinux(m) ?"":".ko";
+
+ switch (exp) {
+ case export_unused:
+ case export_unused_gpl:
+ warn("modpost: module %s%s "
+ "uses symbol '%s' marked UNUSED\n", m, e, s);
+ break;
+ default:
+ /* ignore */
+ break;
+ }
+}
+
+static void check_exports(struct module *mod)
{
struct symbol *s, *exp;
for (s = mod->unres; s; s = s->next) {
const char *basename;
- if (mod->gpl_compatible == 1) {
- /* GPL-compatible modules may use all symbols */
- continue;
- }
exp = find_symbol(s->name);
if (!exp || exp->module == mod)
continue;
basename = strrchr(mod->name, '/');
if (basename)
basename++;
- switch (exp->export) {
- case export_gpl:
- fatal("modpost: GPL-incompatible module %s "
- "uses GPL-only symbol '%s'\n",
- basename ? basename : mod->name,
- exp->name);
- break;
- case export_gpl_future:
- warn("modpost: GPL-incompatible module %s "
- "uses future GPL-only symbol '%s'\n",
- basename ? basename : mod->name,
- exp->name);
- break;
- case export_plain: /* ignore */ break;
- case export_unknown: /* ignore */ break;
- }
+ else
+ basename = mod->name;
+ if (!mod->gpl_compatible)
+ check_for_gpl_usage(exp->export, basename, exp->name);
+ check_for_unused(exp->export, basename, exp->name);
}
}
@@ -1271,7 +1312,7 @@
}
/* parse Module.symvers file. line format:
- * 0x12345678<tab>symbol<tab>module[<tab>export]
+ * 0x12345678<tab>symbol<tab>module[[<tab>export]<tab>something]
**/
static void read_dump(const char *fname, unsigned int kernel)
{
@@ -1284,7 +1325,7 @@
return;
while ((line = get_next_line(&pos, file, size))) {
- char *symname, *modname, *d, *export;
+ char *symname, *modname, *d, *export, *end;
unsigned int crc;
struct module *mod;
struct symbol *s;
@@ -1297,7 +1338,8 @@
*modname++ = '\0';
if ((export = strchr(modname, '\t')) != NULL)
*export++ = '\0';
-
+ if (export && ((end = strchr(export, '\t')) != NULL))
+ *end = '\0';
crc = strtoul(line, &d, 16);
if (*symname == '\0' || *modname == '\0' || *d != '\0')
goto fail;
@@ -1396,7 +1438,7 @@
for (mod = modules; mod; mod = mod->next) {
if (mod->skip)
continue;
- check_license(mod);
+ check_exports(mod);
}
for (mod = modules; mod; mod = mod->next) {
diff --git a/scripts/mod/modpost.h b/scripts/mod/modpost.h
index 2b00c60..d398c61 100644
--- a/scripts/mod/modpost.h
+++ b/scripts/mod/modpost.h
@@ -117,7 +117,9 @@
Elf_Sym *symtab_start;
Elf_Sym *symtab_stop;
Elf_Section export_sec;
+ Elf_Section export_unused_sec;
Elf_Section export_gpl_sec;
+ Elf_Section export_unused_gpl_sec;
Elf_Section export_gpl_future_sec;
const char *strtab;
char *modinfo;
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index e9548bc..d2e80e6 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -1845,15 +1845,20 @@
return -ENOTSUPP;
switch (field) {
- case AUDIT_SE_USER:
- case AUDIT_SE_ROLE:
- case AUDIT_SE_TYPE:
+ case AUDIT_SUBJ_USER:
+ case AUDIT_SUBJ_ROLE:
+ case AUDIT_SUBJ_TYPE:
+ case AUDIT_OBJ_USER:
+ case AUDIT_OBJ_ROLE:
+ case AUDIT_OBJ_TYPE:
/* only 'equals' and 'not equals' fit user, role, and type */
if (op != AUDIT_EQUAL && op != AUDIT_NOT_EQUAL)
return -EINVAL;
break;
- case AUDIT_SE_SEN:
- case AUDIT_SE_CLR:
+ case AUDIT_SUBJ_SEN:
+ case AUDIT_SUBJ_CLR:
+ case AUDIT_OBJ_LEV_LOW:
+ case AUDIT_OBJ_LEV_HIGH:
/* we do not allow a range, indicated by the presense of '-' */
if (strchr(rulestr, '-'))
return -EINVAL;
@@ -1874,29 +1879,34 @@
tmprule->au_seqno = latest_granting;
switch (field) {
- case AUDIT_SE_USER:
+ case AUDIT_SUBJ_USER:
+ case AUDIT_OBJ_USER:
userdatum = hashtab_search(policydb.p_users.table, rulestr);
if (!userdatum)
rc = -EINVAL;
else
tmprule->au_ctxt.user = userdatum->value;
break;
- case AUDIT_SE_ROLE:
+ case AUDIT_SUBJ_ROLE:
+ case AUDIT_OBJ_ROLE:
roledatum = hashtab_search(policydb.p_roles.table, rulestr);
if (!roledatum)
rc = -EINVAL;
else
tmprule->au_ctxt.role = roledatum->value;
break;
- case AUDIT_SE_TYPE:
+ case AUDIT_SUBJ_TYPE:
+ case AUDIT_OBJ_TYPE:
typedatum = hashtab_search(policydb.p_types.table, rulestr);
if (!typedatum)
rc = -EINVAL;
else
tmprule->au_ctxt.type = typedatum->value;
break;
- case AUDIT_SE_SEN:
- case AUDIT_SE_CLR:
+ case AUDIT_SUBJ_SEN:
+ case AUDIT_SUBJ_CLR:
+ case AUDIT_OBJ_LEV_LOW:
+ case AUDIT_OBJ_LEV_HIGH:
rc = mls_from_string(rulestr, &tmprule->au_ctxt, GFP_ATOMIC);
break;
}
@@ -1948,7 +1958,8 @@
/* a field/op pair that is not caught here will simply fall through
without a match */
switch (field) {
- case AUDIT_SE_USER:
+ case AUDIT_SUBJ_USER:
+ case AUDIT_OBJ_USER:
switch (op) {
case AUDIT_EQUAL:
match = (ctxt->user == rule->au_ctxt.user);
@@ -1958,7 +1969,8 @@
break;
}
break;
- case AUDIT_SE_ROLE:
+ case AUDIT_SUBJ_ROLE:
+ case AUDIT_OBJ_ROLE:
switch (op) {
case AUDIT_EQUAL:
match = (ctxt->role == rule->au_ctxt.role);
@@ -1968,7 +1980,8 @@
break;
}
break;
- case AUDIT_SE_TYPE:
+ case AUDIT_SUBJ_TYPE:
+ case AUDIT_OBJ_TYPE:
switch (op) {
case AUDIT_EQUAL:
match = (ctxt->type == rule->au_ctxt.type);
@@ -1978,9 +1991,12 @@
break;
}
break;
- case AUDIT_SE_SEN:
- case AUDIT_SE_CLR:
- level = (field == AUDIT_SE_SEN ?
+ case AUDIT_SUBJ_SEN:
+ case AUDIT_SUBJ_CLR:
+ case AUDIT_OBJ_LEV_LOW:
+ case AUDIT_OBJ_LEV_HIGH:
+ level = ((field == AUDIT_SUBJ_SEN ||
+ field == AUDIT_OBJ_LEV_LOW) ?
&ctxt->range.level[0] : &ctxt->range.level[1]);
switch (op) {
case AUDIT_EQUAL:
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index 6b18225..8435fdd 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -360,7 +360,7 @@
if (ret)
goto out;
- ret = request_irq(aaci->dev->irq[0], aaci_irq, SA_SHIRQ|SA_INTERRUPT,
+ ret = request_irq(aaci->dev->irq[0], aaci_irq, IRQF_SHARED|IRQF_DISABLED,
DRIVER_NAME, aaci);
if (ret)
goto out;
diff --git a/sound/drivers/mpu401/mpu401.c b/sound/drivers/mpu401/mpu401.c
index 8b80024..17cc105 100644
--- a/sound/drivers/mpu401/mpu401.c
+++ b/sound/drivers/mpu401/mpu401.c
@@ -83,7 +83,7 @@
if ((err = snd_mpu401_uart_new(card, 0,
MPU401_HW_MPU401,
port[dev], 0,
- irq[dev], irq[dev] >= 0 ? SA_INTERRUPT : 0, NULL)) < 0) {
+ irq[dev], irq[dev] >= 0 ? IRQF_DISABLED : 0, NULL)) < 0) {
printk(KERN_ERR "MPU401 not detected at 0x%lx\n", port[dev]);
goto _err;
}
diff --git a/sound/drivers/mtpav.c b/sound/drivers/mtpav.c
index 474eed0..e064d6c 100644
--- a/sound/drivers/mtpav.c
+++ b/sound/drivers/mtpav.c
@@ -590,7 +590,7 @@
return -EBUSY;
}
mcard->port = port;
- if (request_irq(irq, snd_mtpav_irqh, SA_INTERRUPT, "MOTU MTPAV", mcard)) {
+ if (request_irq(irq, snd_mtpav_irqh, IRQF_DISABLED, "MOTU MTPAV", mcard)) {
snd_printk("MTVAP IRQ %d busy\n", irq);
return -EBUSY;
}
diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c
index 2330fec..52afb4b 100644
--- a/sound/drivers/serial-u16550.c
+++ b/sound/drivers/serial-u16550.c
@@ -795,7 +795,7 @@
if (irq >= 0 && irq != SNDRV_AUTO_IRQ) {
if (request_irq(irq, snd_uart16550_interrupt,
- SA_INTERRUPT, "Serial MIDI", (void *) uart)) {
+ IRQF_DISABLED, "Serial MIDI", (void *) uart)) {
snd_printk("irq %d busy. Using Polling.\n", irq);
} else {
uart->irq = irq;
diff --git a/sound/isa/ad1816a/ad1816a.c b/sound/isa/ad1816a/ad1816a.c
index 31f299a..b33a5fb 100644
--- a/sound/isa/ad1816a/ad1816a.c
+++ b/sound/isa/ad1816a/ad1816a.c
@@ -232,7 +232,7 @@
if (mpu_port[dev] > 0) {
if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port[dev], 0, mpu_irq[dev], SA_INTERRUPT,
+ mpu_port[dev], 0, mpu_irq[dev], IRQF_DISABLED,
NULL) < 0)
printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n", mpu_port[dev]);
}
diff --git a/sound/isa/ad1816a/ad1816a_lib.c b/sound/isa/ad1816a/ad1816a_lib.c
index fd8fe16..8fcf2c1 100644
--- a/sound/isa/ad1816a/ad1816a_lib.c
+++ b/sound/isa/ad1816a/ad1816a_lib.c
@@ -599,7 +599,7 @@
snd_ad1816a_free(chip);
return -EBUSY;
}
- if (request_irq(irq, snd_ad1816a_interrupt, SA_INTERRUPT, "AD1816A", (void *) chip)) {
+ if (request_irq(irq, snd_ad1816a_interrupt, IRQF_DISABLED, "AD1816A", (void *) chip)) {
snd_printk(KERN_ERR "ad1816a: can't grab IRQ %d\n", irq);
snd_ad1816a_free(chip);
return -EBUSY;
diff --git a/sound/isa/ad1848/ad1848_lib.c b/sound/isa/ad1848/ad1848_lib.c
index e0f8baa..e711f87 100644
--- a/sound/isa/ad1848/ad1848_lib.c
+++ b/sound/isa/ad1848/ad1848_lib.c
@@ -902,7 +902,7 @@
snd_ad1848_free(chip);
return -EBUSY;
}
- if (request_irq(irq, snd_ad1848_interrupt, SA_INTERRUPT, "AD1848", (void *) chip)) {
+ if (request_irq(irq, snd_ad1848_interrupt, IRQF_DISABLED, "AD1848", (void *) chip)) {
snd_printk(KERN_ERR "ad1848: can't grab IRQ %d\n", irq);
snd_ad1848_free(chip);
return -EBUSY;
diff --git a/sound/isa/als100.c b/sound/isa/als100.c
index a52bd8a..f2bcfb2 100644
--- a/sound/isa/als100.c
+++ b/sound/isa/als100.c
@@ -250,7 +250,7 @@
if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
if (snd_mpu401_uart_new(card, 0, MPU401_HW_ALS100,
mpu_port[dev], 0,
- mpu_irq[dev], SA_INTERRUPT,
+ mpu_irq[dev], IRQF_DISABLED,
NULL) < 0)
snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx\n", mpu_port[dev]);
}
diff --git a/sound/isa/azt2320.c b/sound/isa/azt2320.c
index 15e5928..b615538 100644
--- a/sound/isa/azt2320.c
+++ b/sound/isa/azt2320.c
@@ -279,7 +279,7 @@
if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
if (snd_mpu401_uart_new(card, 0, MPU401_HW_AZT2320,
mpu_port[dev], 0,
- mpu_irq[dev], SA_INTERRUPT,
+ mpu_irq[dev], IRQF_DISABLED,
NULL) < 0)
snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx\n", mpu_port[dev]);
}
diff --git a/sound/isa/cs423x/cs4231.c b/sound/isa/cs423x/cs4231.c
index 397310f..696a5c8 100644
--- a/sound/isa/cs423x/cs4231.c
+++ b/sound/isa/cs423x/cs4231.c
@@ -122,7 +122,7 @@
if (snd_mpu401_uart_new(card, 0, MPU401_HW_CS4232,
mpu_port[dev], 0,
mpu_irq[dev],
- mpu_irq[dev] >= 0 ? SA_INTERRUPT : 0,
+ mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
printk(KERN_WARNING "cs4231: MPU401 not detected\n");
}
diff --git a/sound/isa/cs423x/cs4231_lib.c b/sound/isa/cs423x/cs4231_lib.c
index 823db82..fbb2017 100644
--- a/sound/isa/cs423x/cs4231_lib.c
+++ b/sound/isa/cs423x/cs4231_lib.c
@@ -1454,7 +1454,7 @@
return -ENODEV;
}
chip->cport = cport;
- if (!(hwshare & CS4231_HWSHARE_IRQ) && request_irq(irq, snd_cs4231_interrupt, SA_INTERRUPT, "CS4231", (void *) chip)) {
+ if (!(hwshare & CS4231_HWSHARE_IRQ) && request_irq(irq, snd_cs4231_interrupt, IRQF_DISABLED, "CS4231", (void *) chip)) {
snd_printk(KERN_ERR "cs4231: can't grab IRQ %d\n", irq);
snd_cs4231_free(chip);
return -EBUSY;
diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c
index f7fa7793..07ffd5c 100644
--- a/sound/isa/cs423x/cs4236.c
+++ b/sound/isa/cs423x/cs4236.c
@@ -535,7 +535,7 @@
if (snd_mpu401_uart_new(card, 0, MPU401_HW_CS4232,
mpu_port[dev], 0,
mpu_irq[dev],
- mpu_irq[dev] >= 0 ? SA_INTERRUPT : 0, NULL) < 0)
+ mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0, NULL) < 0)
printk(KERN_WARNING IDENT ": MPU401 not detected\n");
}
diff --git a/sound/isa/dt019x.c b/sound/isa/dt019x.c
index 0acb4e5..c20a4b1 100644
--- a/sound/isa/dt019x.c
+++ b/sound/isa/dt019x.c
@@ -240,7 +240,7 @@
MPU401_HW_MPU401,
mpu_port[dev], 0,
mpu_irq[dev],
- mpu_irq[dev] >= 0 ? SA_INTERRUPT : 0,
+ mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx ?\n", mpu_port[dev]);
}
diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c
index e90689e..7f29f56 100644
--- a/sound/isa/es1688/es1688.c
+++ b/sound/isa/es1688/es1688.c
@@ -153,7 +153,7 @@
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
chip->mpu_port, 0,
xmpu_irq,
- SA_INTERRUPT,
+ IRQF_DISABLED,
NULL)) < 0)
goto _err;
}
diff --git a/sound/isa/es1688/es1688_lib.c b/sound/isa/es1688/es1688_lib.c
index 702ad51..7e985d3 100644
--- a/sound/isa/es1688/es1688_lib.c
+++ b/sound/isa/es1688/es1688_lib.c
@@ -659,7 +659,7 @@
snd_es1688_free(chip);
return -EBUSY;
}
- if (request_irq(irq, snd_es1688_interrupt, SA_INTERRUPT, "ES1688", (void *) chip)) {
+ if (request_irq(irq, snd_es1688_interrupt, IRQF_DISABLED, "ES1688", (void *) chip)) {
snd_printk(KERN_ERR "es1688: can't grab IRQ %d\n", irq);
snd_es1688_free(chip);
return -EBUSY;
diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c
index af60b0b..34998de 100644
--- a/sound/isa/es18xx.c
+++ b/sound/isa/es18xx.c
@@ -1837,7 +1837,7 @@
return -EBUSY;
}
- if (request_irq(irq, snd_es18xx_interrupt, SA_INTERRUPT, "ES18xx", (void *) chip)) {
+ if (request_irq(irq, snd_es18xx_interrupt, IRQF_DISABLED, "ES18xx", (void *) chip)) {
snd_es18xx_free(chip);
snd_printk(KERN_ERR PFX "unable to grap IRQ %d\n", irq);
return -EBUSY;
diff --git a/sound/isa/gus/gus_main.c b/sound/isa/gus/gus_main.c
index 53eeaf3..b680fdd 100644
--- a/sound/isa/gus/gus_main.c
+++ b/sound/isa/gus/gus_main.c
@@ -179,7 +179,7 @@
snd_gus_free(gus);
return -EBUSY;
}
- if (irq >= 0 && request_irq(irq, snd_gus_interrupt, SA_INTERRUPT, "GUS GF1", (void *) gus)) {
+ if (irq >= 0 && request_irq(irq, snd_gus_interrupt, IRQF_DISABLED, "GUS GF1", (void *) gus)) {
snd_printk(KERN_ERR "gus: can't grab irq %d\n", irq);
snd_gus_free(gus);
return -EBUSY;
diff --git a/sound/isa/gus/gusextreme.c b/sound/isa/gus/gusextreme.c
index 05852fc..22cdddb 100644
--- a/sound/isa/gus/gusextreme.c
+++ b/sound/isa/gus/gusextreme.c
@@ -301,7 +301,7 @@
(err = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
es1688->mpu_port, 0,
xmpu_irq,
- SA_INTERRUPT,
+ IRQF_DISABLED,
NULL)) < 0)
goto out;
diff --git a/sound/isa/gus/gusmax.c b/sound/isa/gus/gusmax.c
index fcf2c8f..ac11cae 100644
--- a/sound/isa/gus/gusmax.c
+++ b/sound/isa/gus/gusmax.c
@@ -292,7 +292,7 @@
goto _err;
}
- if (request_irq(xirq, snd_gusmax_interrupt, SA_INTERRUPT, "GUS MAX", (void *)maxcard)) {
+ if (request_irq(xirq, snd_gusmax_interrupt, IRQF_DISABLED, "GUS MAX", (void *)maxcard)) {
snd_printk(KERN_ERR PFX "unable to grab IRQ %d\n", xirq);
err = -EBUSY;
goto _err;
diff --git a/sound/isa/gus/interwave.c b/sound/isa/gus/interwave.c
index c1c86e0..ea69f25 100644
--- a/sound/isa/gus/interwave.c
+++ b/sound/isa/gus/interwave.c
@@ -706,7 +706,7 @@
if ((err = snd_gus_initialize(gus)) < 0)
return err;
- if (request_irq(xirq, snd_interwave_interrupt, SA_INTERRUPT,
+ if (request_irq(xirq, snd_interwave_interrupt, IRQF_DISABLED,
"InterWave", iwcard)) {
snd_printk(KERN_ERR PFX "unable to grab IRQ %d\n", xirq);
return -EBUSY;
diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c
index 647a996..4031b61 100644
--- a/sound/isa/opl3sa2.c
+++ b/sound/isa/opl3sa2.c
@@ -683,7 +683,7 @@
chip->single_dma = 1;
if ((err = snd_opl3sa2_detect(chip)) < 0)
return err;
- if (request_irq(xirq, snd_opl3sa2_interrupt, SA_INTERRUPT, "OPL3-SA2", chip)) {
+ if (request_irq(xirq, snd_opl3sa2_interrupt, IRQF_DISABLED, "OPL3-SA2", chip)) {
snd_printk(KERN_ERR PFX "can't grab IRQ %d\n", xirq);
return -ENODEV;
}
diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c
index 283817f..1dd9837 100644
--- a/sound/isa/opti9xx/miro.c
+++ b/sound/isa/opti9xx/miro.c
@@ -1382,7 +1382,7 @@
rmidi = NULL;
else
if ((error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- miro->mpu_port, 0, miro->mpu_irq, SA_INTERRUPT,
+ miro->mpu_port, 0, miro->mpu_irq, IRQF_DISABLED,
&rmidi)))
snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n", miro->mpu_port);
diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index 8ee0d70..9d528ae 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -1291,7 +1291,7 @@
}
codec->dma2 = chip->dma2;
- if (request_irq(chip->irq, snd_opti93x_interrupt, SA_INTERRUPT, DRIVER_NAME" - WSS", codec)) {
+ if (request_irq(chip->irq, snd_opti93x_interrupt, IRQF_DISABLED, DRIVER_NAME" - WSS", codec)) {
snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", chip->irq);
snd_opti93x_free(codec);
return -EBUSY;
@@ -1863,7 +1863,7 @@
rmidi = NULL;
else
if ((error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- chip->mpu_port, 0, chip->mpu_irq, SA_INTERRUPT,
+ chip->mpu_port, 0, chip->mpu_irq, IRQF_DISABLED,
&rmidi)))
snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n",
chip->mpu_port);
diff --git a/sound/isa/sb/sb_common.c b/sound/isa/sb/sb_common.c
index f343a82..f17de2b 100644
--- a/sound/isa/sb/sb_common.c
+++ b/sound/isa/sb/sb_common.c
@@ -232,7 +232,7 @@
chip->port = port;
if (request_irq(irq, irq_handler, hardware == SB_HW_ALS4000 ?
- SA_INTERRUPT | SA_SHIRQ : SA_INTERRUPT,
+ IRQF_DISABLED | IRQF_SHARED : IRQF_DISABLED,
"SoundBlaster", (void *) chip)) {
snd_printk(KERN_ERR "sb: can't grab irq %d\n", irq);
snd_sbdsp_free(chip);
diff --git a/sound/isa/sgalaxy.c b/sound/isa/sgalaxy.c
index 09c8e8c..8742fa5 100644
--- a/sound/isa/sgalaxy.c
+++ b/sound/isa/sgalaxy.c
@@ -147,7 +147,7 @@
if (tmp < 0)
return -EINVAL;
- if (request_irq(irq, snd_sgalaxy_dummy_interrupt, SA_INTERRUPT, "sgalaxy", NULL)) {
+ if (request_irq(irq, snd_sgalaxy_dummy_interrupt, IRQF_DISABLED, "sgalaxy", NULL)) {
snd_printk(KERN_ERR "sgalaxy: can't grab irq %d\n", irq);
return -EIO;
}
diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c
index 27271c9..b1f2582 100644
--- a/sound/isa/sscape.c
+++ b/sound/isa/sscape.c
@@ -900,7 +900,7 @@
if ((err = snd_mpu401_uart_new(card, devnum,
MPU401_HW_MPU401,
port, MPU401_INFO_INTEGRATED,
- irq, SA_INTERRUPT,
+ irq, IRQF_DISABLED,
&rawmidi)) == 0) {
struct snd_mpu401 *mpu = (struct snd_mpu401 *) rawmidi->private_data;
mpu->open_input = mpu401_open;
diff --git a/sound/isa/wavefront/wavefront.c b/sound/isa/wavefront/wavefront.c
index 9eb2708..a8f8d2f 100644
--- a/sound/isa/wavefront/wavefront.c
+++ b/sound/isa/wavefront/wavefront.c
@@ -467,7 +467,7 @@
return -EBUSY;
}
if (request_irq(ics2115_irq[dev], snd_wavefront_ics2115_interrupt,
- SA_INTERRUPT, "ICS2115", acard)) {
+ IRQF_DISABLED, "ICS2115", acard)) {
snd_printk(KERN_ERR "unable to use ICS2115 IRQ %d\n", ics2115_irq[dev]);
return -EBUSY;
}
@@ -497,7 +497,7 @@
if ((err = snd_mpu401_uart_new(card, midi_dev, MPU401_HW_CS4232,
cs4232_mpu_port[dev], 0,
cs4232_mpu_irq[dev],
- SA_INTERRUPT,
+ IRQF_DISABLED,
NULL)) < 0) {
snd_printk (KERN_ERR "can't allocate CS4232 MPU-401 device\n");
return err;
diff --git a/sound/mips/au1x00.c b/sound/mips/au1x00.c
index cf476fe..c31b386 100644
--- a/sound/mips/au1x00.c
+++ b/sound/mips/au1x00.c
@@ -465,13 +465,13 @@
flags = claim_dma_lock();
if ((au1000->stream[PLAYBACK]->dma = request_au1000_dma(DMA_ID_AC97C_TX,
- "AC97 TX", au1000_dma_interrupt, SA_INTERRUPT,
+ "AC97 TX", au1000_dma_interrupt, IRQF_DISABLED,
au1000->stream[PLAYBACK])) < 0) {
release_dma_lock(flags);
return -EBUSY;
}
if ((au1000->stream[CAPTURE]->dma = request_au1000_dma(DMA_ID_AC97C_RX,
- "AC97 RX", au1000_dma_interrupt, SA_INTERRUPT,
+ "AC97 RX", au1000_dma_interrupt, IRQF_DISABLED,
au1000->stream[CAPTURE])) < 0){
release_dma_lock(flags);
return -EBUSY;
diff --git a/sound/oss/ad1889.c b/sound/oss/ad1889.c
index 0b09b8b..f56f870 100644
--- a/sound/oss/ad1889.c
+++ b/sound/oss/ad1889.c
@@ -1010,7 +1010,7 @@
goto out2;
}
- if (request_irq(pcidev->irq, ad1889_interrupt, SA_SHIRQ, DEVNAME, dev) != 0) {
+ if (request_irq(pcidev->irq, ad1889_interrupt, IRQF_SHARED, DEVNAME, dev) != 0) {
printk(KERN_ERR DEVNAME ": unable to request interrupt\n");
goto out3;
}
diff --git a/sound/oss/ali5455.c b/sound/oss/ali5455.c
index 62bb936..70dcd70 100644
--- a/sound/oss/ali5455.c
+++ b/sound/oss/ali5455.c
@@ -3460,7 +3460,7 @@
card->channel[4].num = 4;
/* claim our iospace and irq */
request_region(card->iobase, 256, card_names[pci_id->driver_data]);
- if (request_irq(card->irq, &ali_interrupt, SA_SHIRQ,
+ if (request_irq(card->irq, &ali_interrupt, IRQF_SHARED,
card_names[pci_id->driver_data], card)) {
printk(KERN_ERR "ali_audio: unable to allocate irq %d\n",
card->irq);
diff --git a/sound/oss/au1000.c b/sound/oss/au1000.c
index eacb0ae..e379623 100644
--- a/sound/oss/au1000.c
+++ b/sound/oss/au1000.c
@@ -2015,14 +2015,14 @@
if ((s->dma_dac.dmanr = request_au1000_dma(DMA_ID_AC97C_TX,
"audio DAC",
dac_dma_interrupt,
- SA_INTERRUPT, s)) < 0) {
+ IRQF_DISABLED, s)) < 0) {
err("Can't get DAC DMA");
goto err_dma1;
}
if ((s->dma_adc.dmanr = request_au1000_dma(DMA_ID_AC97C_RX,
"audio ADC",
adc_dma_interrupt,
- SA_INTERRUPT, s)) < 0) {
+ IRQF_DISABLED, s)) < 0) {
err("Can't get ADC DMA");
goto err_dma2;
}
diff --git a/sound/oss/btaudio.c b/sound/oss/btaudio.c
index bfe3b53..324a81f 100644
--- a/sound/oss/btaudio.c
+++ b/sound/oss/btaudio.c
@@ -966,7 +966,7 @@
btwrite(~0U, REG_INT_STAT);
pci_set_master(pci_dev);
- if ((rc = request_irq(bta->irq, btaudio_irq, SA_SHIRQ|SA_INTERRUPT,
+ if ((rc = request_irq(bta->irq, btaudio_irq, IRQF_SHARED|IRQF_DISABLED,
"btaudio",(void *)bta)) < 0) {
printk(KERN_WARNING
"btaudio: can't request irq (rc=%d)\n",rc);
diff --git a/sound/oss/cmpci.c b/sound/oss/cmpci.c
index de60a05..ea51aaf 100644
--- a/sound/oss/cmpci.c
+++ b/sound/oss/cmpci.c
@@ -3122,7 +3122,7 @@
wrmixer(s, DSP_MIX_DATARESETIDX, 0);
/* request irq */
- if ((ret = request_irq(s->irq, cm_interrupt, SA_SHIRQ, "cmpci", s))) {
+ if ((ret = request_irq(s->irq, cm_interrupt, IRQF_SHARED, "cmpci", s))) {
printk(KERN_ERR "cmpci: irq %u in use\n", s->irq);
goto err_irq;
}
diff --git a/sound/oss/cs4281/cs4281m.c b/sound/oss/cs4281/cs4281m.c
index 0004442..0400a41 100644
--- a/sound/oss/cs4281/cs4281m.c
+++ b/sound/oss/cs4281/cs4281m.c
@@ -4346,7 +4346,7 @@
s->pcidev = pcidev;
s->irq = pcidev->irq;
if (request_irq
- (s->irq, cs4281_interrupt, SA_SHIRQ, "Crystal CS4281", s)) {
+ (s->irq, cs4281_interrupt, IRQF_SHARED, "Crystal CS4281", s)) {
CS_DBGOUT(CS_INIT | CS_ERROR, 1,
printk(KERN_ERR "cs4281: irq %u in use\n", s->irq));
goto err_irq;
diff --git a/sound/oss/cs46xx.c b/sound/oss/cs46xx.c
index 994c71e..5195bf9 100644
--- a/sound/oss/cs46xx.c
+++ b/sound/oss/cs46xx.c
@@ -5177,7 +5177,7 @@
card->ba1.name.reg == 0)
goto fail2;
- if (request_irq(card->irq, &cs_interrupt, SA_SHIRQ, "cs46xx", card)) {
+ if (request_irq(card->irq, &cs_interrupt, IRQF_SHARED, "cs46xx", card)) {
printk(KERN_ERR "cs46xx: unable to allocate irq %d\n", card->irq);
goto fail2;
}
diff --git a/sound/oss/emu10k1/main.c b/sound/oss/emu10k1/main.c
index 3721c58..c4ce94d 100644
--- a/sound/oss/emu10k1/main.c
+++ b/sound/oss/emu10k1/main.c
@@ -1301,7 +1301,7 @@
card->pci_dev = pci_dev;
/* Reserve IRQ Line */
- if (request_irq(card->irq, emu10k1_interrupt, SA_SHIRQ, card_names[pci_id->driver_data], card)) {
+ if (request_irq(card->irq, emu10k1_interrupt, IRQF_SHARED, card_names[pci_id->driver_data], card)) {
printk(KERN_ERR "emu10k1: IRQ in use\n");
ret = -EBUSY;
goto err_irq;
diff --git a/sound/oss/es1370.c b/sound/oss/es1370.c
index 094f569..13f4831 100644
--- a/sound/oss/es1370.c
+++ b/sound/oss/es1370.c
@@ -2650,7 +2650,7 @@
ret = -EBUSY;
goto err_region;
}
- if ((ret=request_irq(s->irq, es1370_interrupt, SA_SHIRQ, "es1370",s))) {
+ if ((ret=request_irq(s->irq, es1370_interrupt, IRQF_SHARED, "es1370",s))) {
printk(KERN_ERR "es1370: irq %u in use\n", s->irq);
goto err_irq;
}
diff --git a/sound/oss/es1371.c b/sound/oss/es1371.c
index 4400c85..a2ffe72 100644
--- a/sound/oss/es1371.c
+++ b/sound/oss/es1371.c
@@ -2905,7 +2905,7 @@
res = -EBUSY;
goto err_region;
}
- if ((res=request_irq(s->irq, es1371_interrupt, SA_SHIRQ, "es1371",s))) {
+ if ((res=request_irq(s->irq, es1371_interrupt, IRQF_SHARED, "es1371",s))) {
printk(KERN_ERR PFX "irq %u in use\n", s->irq);
goto err_irq;
}
diff --git a/sound/oss/esssolo1.c b/sound/oss/esssolo1.c
index 6861563..82f40a0 100644
--- a/sound/oss/esssolo1.c
+++ b/sound/oss/esssolo1.c
@@ -2392,7 +2392,7 @@
printk(KERN_ERR "solo1: io ports in use\n");
goto err_region4;
}
- if ((ret=request_irq(s->irq,solo1_interrupt,SA_SHIRQ,"ESS Solo1",s))) {
+ if ((ret=request_irq(s->irq,solo1_interrupt,IRQF_SHARED,"ESS Solo1",s))) {
printk(KERN_ERR "solo1: irq %u in use\n", s->irq);
goto err_irq;
}
diff --git a/sound/oss/forte.c b/sound/oss/forte.c
index 44e5780..ea1c020 100644
--- a/sound/oss/forte.c
+++ b/sound/oss/forte.c
@@ -2026,7 +2026,7 @@
chip->iobase = pci_resource_start (pci_dev, 0);
chip->irq = pci_dev->irq;
- if (request_irq (chip->irq, forte_interrupt, SA_SHIRQ, DRIVER_NAME,
+ if (request_irq (chip->irq, forte_interrupt, IRQF_SHARED, DRIVER_NAME,
chip)) {
printk (KERN_WARNING PFX "Unable to reserve IRQ");
ret = -EIO;
diff --git a/sound/oss/hal2.c b/sound/oss/hal2.c
index dd4f59d..80ab402 100644
--- a/sound/oss/hal2.c
+++ b/sound/oss/hal2.c
@@ -1479,7 +1479,7 @@
hpc3->pbus_dmacfg[hal2->dac.pbus.pbusnr][0] = 0x8208844;
hpc3->pbus_dmacfg[hal2->adc.pbus.pbusnr][0] = 0x8208844;
- if (request_irq(SGI_HPCDMA_IRQ, hal2_interrupt, SA_SHIRQ,
+ if (request_irq(SGI_HPCDMA_IRQ, hal2_interrupt, IRQF_SHARED,
hal2str, hal2)) {
printk(KERN_ERR "HAL2: Can't get irq %d\n", SGI_HPCDMA_IRQ);
ret = -EAGAIN;
diff --git a/sound/oss/i810_audio.c b/sound/oss/i810_audio.c
index dd2b871..ddcddc2 100644
--- a/sound/oss/i810_audio.c
+++ b/sound/oss/i810_audio.c
@@ -3413,7 +3413,7 @@
goto out_iospace;
}
- if (request_irq(card->irq, &i810_interrupt, SA_SHIRQ,
+ if (request_irq(card->irq, &i810_interrupt, IRQF_SHARED,
card_names[pci_id->driver_data], card)) {
printk(KERN_ERR "i810_audio: unable to allocate irq %d\n", card->irq);
goto out_iospace;
diff --git a/sound/oss/ite8172.c b/sound/oss/ite8172.c
index 00ac1c9..68aab36 100644
--- a/sound/oss/ite8172.c
+++ b/sound/oss/ite8172.c
@@ -2019,7 +2019,7 @@
s->io, s->io + pci_resource_len(pcidev,0)-1);
goto err_region;
}
- if (request_irq(s->irq, it8172_interrupt, SA_INTERRUPT,
+ if (request_irq(s->irq, it8172_interrupt, IRQF_DISABLED,
IT8172_MODULE_NAME, s)) {
err("irq %u in use", s->irq);
goto err_irq;
diff --git a/sound/oss/maestro.c b/sound/oss/maestro.c
index e647f2f..1d98d10 100644
--- a/sound/oss/maestro.c
+++ b/sound/oss/maestro.c
@@ -3545,7 +3545,7 @@
mixer_push_state(card);
}
- if((ret=request_irq(card->irq, ess_interrupt, SA_SHIRQ, card_names[card_type], card)))
+ if((ret=request_irq(card->irq, ess_interrupt, IRQF_SHARED, card_names[card_type], card)))
{
printk(KERN_ERR "maestro: unable to allocate irq %d,\n", card->irq);
unregister_sound_mixer(card->dev_mixer);
diff --git a/sound/oss/maestro3.c b/sound/oss/maestro3.c
index 4a5e423..5548e3c 100644
--- a/sound/oss/maestro3.c
+++ b/sound/oss/maestro3.c
@@ -2694,7 +2694,7 @@
}
}
- if(request_irq(card->irq, m3_interrupt, SA_SHIRQ, card_names[card->card_type], card)) {
+ if(request_irq(card->irq, m3_interrupt, IRQF_SHARED, card_names[card->card_type], card)) {
printk(KERN_ERR PFX "unable to allocate irq %d,\n", card->irq);
diff --git a/sound/oss/nec_vrc5477.c b/sound/oss/nec_vrc5477.c
index 21c1954d..6f7f2f0 100644
--- a/sound/oss/nec_vrc5477.c
+++ b/sound/oss/nec_vrc5477.c
@@ -1909,7 +1909,7 @@
s->io, s->io + pci_resource_len(pcidev,0)-1);
goto err_region;
}
- if (request_irq(s->irq, vrc5477_ac97_interrupt, SA_INTERRUPT,
+ if (request_irq(s->irq, vrc5477_ac97_interrupt, IRQF_DISABLED,
VRC5477_AC97_MODULE_NAME, s)) {
printk(KERN_ERR PFX "irq %u in use\n", s->irq);
goto err_irq;
diff --git a/sound/oss/nm256_audio.c b/sound/oss/nm256_audio.c
index 6e662ac..7760ddd 100644
--- a/sound/oss/nm256_audio.c
+++ b/sound/oss/nm256_audio.c
@@ -733,7 +733,7 @@
nm256_grabInterrupt (struct nm256_info *card)
{
if (card->has_irq++ == 0) {
- if (request_irq (card->irq, card->introutine, SA_SHIRQ,
+ if (request_irq (card->irq, card->introutine, IRQF_SHARED,
"NM256_audio", card) < 0) {
printk (KERN_ERR "NM256: can't obtain IRQ %d\n", card->irq);
return -1;
diff --git a/sound/oss/rme96xx.c b/sound/oss/rme96xx.c
index a1ec9d1..f17d25b 100644
--- a/sound/oss/rme96xx.c
+++ b/sound/oss/rme96xx.c
@@ -994,7 +994,7 @@
if (pci_enable_device(pcidev))
goto err_irq;
- if (request_irq(s->irq, rme96xx_interrupt, SA_SHIRQ, "rme96xx", s)) {
+ if (request_irq(s->irq, rme96xx_interrupt, IRQF_SHARED, "rme96xx", s)) {
printk(KERN_ERR RME_MESS" irq %u in use\n", s->irq);
goto err_irq;
}
diff --git a/sound/oss/sb_common.c b/sound/oss/sb_common.c
index 3e8ecac..35bab6e 100644
--- a/sound/oss/sb_common.c
+++ b/sound/oss/sb_common.c
@@ -677,7 +677,7 @@
* will get shared PCI irq lines we must cope.
*/
- int i=(devc->caps&SB_PCI_IRQ)?SA_SHIRQ:0;
+ int i=(devc->caps&SB_PCI_IRQ)?IRQF_SHARED:0;
if (request_irq(hw_config->irq, sbintr, i, "soundblaster", devc) < 0)
{
diff --git a/sound/oss/sh_dac_audio.c b/sound/oss/sh_dac_audio.c
index cbf745d..7b168d8 100644
--- a/sound/oss/sh_dac_audio.c
+++ b/sound/oss/sh_dac_audio.c
@@ -297,7 +297,7 @@
dac_audio_set_rate();
retval =
- request_irq(TIMER1_IRQ, timer1_interrupt, SA_INTERRUPT, MODNAME, 0);
+ request_irq(TIMER1_IRQ, timer1_interrupt, IRQF_DISABLED, MODNAME, 0);
if (retval < 0) {
printk(KERN_ERR "sh_dac_audio: IRQ %d request failed\n",
TIMER1_IRQ);
diff --git a/sound/oss/sonicvibes.c b/sound/oss/sonicvibes.c
index 42bd276..8ea532d 100644
--- a/sound/oss/sonicvibes.c
+++ b/sound/oss/sonicvibes.c
@@ -2632,7 +2632,7 @@
wrindir(s, SV_CIPCMSR1, ((8000 * 65536 / FULLRATE) >> 8) & 0xff);
wrindir(s, SV_CIADCOUTPUT, 0);
/* request irq */
- if ((ret=request_irq(s->irq,sv_interrupt,SA_SHIRQ,"S3 SonicVibes",s))) {
+ if ((ret=request_irq(s->irq,sv_interrupt,IRQF_SHARED,"S3 SonicVibes",s))) {
printk(KERN_ERR "sv: irq %u in use\n", s->irq);
goto err_irq;
}
diff --git a/sound/oss/trident.c b/sound/oss/trident.c
index 420a866..2813e4c 100644
--- a/sound/oss/trident.c
+++ b/sound/oss/trident.c
@@ -4472,7 +4472,7 @@
/* claim our irq */
rc = -ENODEV;
- if (request_irq(card->irq, &trident_interrupt, SA_SHIRQ,
+ if (request_irq(card->irq, &trident_interrupt, IRQF_SHARED,
card_names[pci_id->driver_data], card)) {
printk(KERN_ERR "trident: unable to allocate irq %d\n",
card->irq);
diff --git a/sound/oss/via82cxxx_audio.c b/sound/oss/via82cxxx_audio.c
index 3ada26b..08d8c94 100644
--- a/sound/oss/via82cxxx_audio.c
+++ b/sound/oss/via82cxxx_audio.c
@@ -2013,7 +2013,7 @@
tmp8 |= VIA_CR48_FM_TRAP_TO_NMI;
pci_write_config_byte (card->pdev, VIA_FM_NMI_CTRL, tmp8);
}
- if (request_irq (card->pdev->irq, via_interrupt, SA_SHIRQ, VIA_MODULE_NAME, card)) {
+ if (request_irq (card->pdev->irq, via_interrupt, IRQF_SHARED, VIA_MODULE_NAME, card)) {
printk (KERN_ERR PFX "unable to obtain IRQ %d, aborting\n",
card->pdev->irq);
DPRINTK ("EXIT, returning -EBUSY\n");
@@ -2022,7 +2022,7 @@
}
else
{
- if (request_irq (card->pdev->irq, via_new_interrupt, SA_SHIRQ, VIA_MODULE_NAME, card)) {
+ if (request_irq (card->pdev->irq, via_new_interrupt, IRQF_SHARED, VIA_MODULE_NAME, card)) {
printk (KERN_ERR PFX "unable to obtain IRQ %d, aborting\n",
card->pdev->irq);
DPRINTK ("EXIT, returning -EBUSY\n");
diff --git a/sound/oss/wavfront.c b/sound/oss/wavfront.c
index b1a4eeb..1dec395 100644
--- a/sound/oss/wavfront.c
+++ b/sound/oss/wavfront.c
@@ -2268,7 +2268,7 @@
}
if (request_irq (dev.irq, wavefrontintr,
- SA_INTERRUPT|SA_SHIRQ,
+ IRQF_DISABLED|IRQF_SHARED,
"wavefront synth", &dev) < 0) {
printk (KERN_WARNING LOGNAME "IRQ %d not available!\n",
dev.irq);
diff --git a/sound/oss/wf_midi.c b/sound/oss/wf_midi.c
index 7b167b7..3f3a390 100644
--- a/sound/oss/wf_midi.c
+++ b/sound/oss/wf_midi.c
@@ -820,7 +820,7 @@
/* OK, now we're configured to handle an interrupt ... */
- if (request_irq (phys_dev->irq, wf_mpuintr, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq (phys_dev->irq, wf_mpuintr, IRQF_DISABLED|IRQF_SHARED,
"wavefront midi", phys_dev) < 0) {
printk (KERN_ERR "WF-MPU: Failed to allocate IRQ%d\n",
diff --git a/sound/oss/ymfpci.c b/sound/oss/ymfpci.c
index bf90c12..6e22472 100644
--- a/sound/oss/ymfpci.c
+++ b/sound/oss/ymfpci.c
@@ -2573,7 +2573,7 @@
goto out_disable_dsp;
ymf_memload(codec);
- if (request_irq(pcidev->irq, ymf_interrupt, SA_SHIRQ, "ymfpci", codec) != 0) {
+ if (request_irq(pcidev->irq, ymf_interrupt, IRQF_SHARED, "ymfpci", codec) != 0) {
printk(KERN_ERR "ymfpci: unable to request IRQ %d\n",
pcidev->irq);
goto out_memfree;
diff --git a/sound/pci/ad1889.c b/sound/pci/ad1889.c
index d42bf45..f7aef8c 100644
--- a/sound/pci/ad1889.c
+++ b/sound/pci/ad1889.c
@@ -947,7 +947,7 @@
spin_lock_init(&chip->lock); /* only now can we call ad1889_free */
if (request_irq(pci->irq, snd_ad1889_interrupt,
- SA_INTERRUPT|SA_SHIRQ, card->driver, (void*)chip)) {
+ IRQF_DISABLED|IRQF_SHARED, card->driver, (void*)chip)) {
printk(KERN_ERR PFX "cannot obtain IRQ %d\n", pci->irq);
snd_ad1889_free(chip);
return -EBUSY;
diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c
index 5dfdbf6..e0a815e 100644
--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -2185,7 +2185,7 @@
return err;
codec->port = pci_resource_start(codec->pci, 0);
- if (request_irq(codec->pci->irq, snd_ali_card_interrupt, SA_INTERRUPT|SA_SHIRQ, "ALI 5451", (void *)codec)) {
+ if (request_irq(codec->pci->irq, snd_ali_card_interrupt, IRQF_DISABLED|IRQF_SHARED, "ALI 5451", (void *)codec)) {
snd_printk(KERN_ERR "Unable to request irq.\n");
return -EBUSY;
}
diff --git a/sound/pci/als300.c b/sound/pci/als300.c
index 901b08a..a9c3896 100644
--- a/sound/pci/als300.c
+++ b/sound/pci/als300.c
@@ -724,7 +724,7 @@
else
irq_handler = snd_als300_interrupt;
- if (request_irq(pci->irq, irq_handler, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, irq_handler, IRQF_DISABLED|IRQF_SHARED,
card->shortname, (void *)chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_als300_free(chip);
diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c
index f18a8c0..9fbb065 100644
--- a/sound/pci/atiixp.c
+++ b/sound/pci/atiixp.c
@@ -1578,7 +1578,7 @@
return -EIO;
}
- if (request_irq(pci->irq, snd_atiixp_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, snd_atiixp_interrupt, IRQF_DISABLED|IRQF_SHARED,
card->shortname, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_atiixp_free(chip);
diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c
index 4073905..7dcf494 100644
--- a/sound/pci/atiixp_modem.c
+++ b/sound/pci/atiixp_modem.c
@@ -1251,7 +1251,7 @@
return -EIO;
}
- if (request_irq(pci->irq, snd_atiixp_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, snd_atiixp_interrupt, IRQF_DISABLED|IRQF_SHARED,
card->shortname, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_atiixp_free(chip);
diff --git a/sound/pci/au88x0/au88x0.c b/sound/pci/au88x0/au88x0.c
index 8a3b118..ef189d7 100644
--- a/sound/pci/au88x0/au88x0.c
+++ b/sound/pci/au88x0/au88x0.c
@@ -197,7 +197,7 @@
}
if ((err = request_irq(pci->irq, vortex_interrupt,
- SA_INTERRUPT | SA_SHIRQ, CARD_NAME_SHORT,
+ IRQF_DISABLED | IRQF_SHARED, CARD_NAME_SHORT,
chip)) != 0) {
printk(KERN_ERR "cannot grab irq\n");
goto irq_out;
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index 6e62daf..15447a3 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -1724,7 +1724,7 @@
chip->synth_port = pci_resource_start(pci, 3);
chip->mixer_port = pci_resource_start(pci, 4);
- if (request_irq(pci->irq, snd_azf3328_interrupt, SA_INTERRUPT|SA_SHIRQ, card->shortname, (void *)chip)) {
+ if (request_irq(pci->irq, snd_azf3328_interrupt, IRQF_DISABLED|IRQF_SHARED, card->shortname, (void *)chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
err = -EBUSY;
goto out_err;
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index 497ed6b..4d4277d 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -747,7 +747,7 @@
snd_bt87x_writel(chip, REG_INT_MASK, 0);
snd_bt87x_writel(chip, REG_INT_STAT, MY_INTERRUPTS);
- if (request_irq(pci->irq, snd_bt87x_interrupt, SA_INTERRUPT | SA_SHIRQ,
+ if (request_irq(pci->irq, snd_bt87x_interrupt, IRQF_DISABLED | IRQF_SHARED,
"Bt87x audio", chip)) {
snd_bt87x_free(chip);
snd_printk(KERN_ERR "cannot grab irq\n");
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 59bf9bd..a30c019 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -1268,7 +1268,7 @@
}
if (request_irq(pci->irq, snd_ca0106_interrupt,
- SA_INTERRUPT|SA_SHIRQ, "snd_ca0106",
+ IRQF_DISABLED|IRQF_SHARED, "snd_ca0106",
(void *)chip)) {
snd_ca0106_free(chip);
printk(KERN_ERR "cannot grab irq\n");
diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index 0938c15..03766ad 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -2862,7 +2862,7 @@
cm->iobase = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_cmipci_interrupt,
- SA_INTERRUPT|SA_SHIRQ, card->driver, cm)) {
+ IRQF_DISABLED|IRQF_SHARED, card->driver, cm)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_cmipci_free(cm);
return -EBUSY;
diff --git a/sound/pci/cs4281.c b/sound/pci/cs4281.c
index e77a4ce..d180248 100644
--- a/sound/pci/cs4281.c
+++ b/sound/pci/cs4281.c
@@ -1386,7 +1386,7 @@
return -ENOMEM;
}
- if (request_irq(pci->irq, snd_cs4281_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, snd_cs4281_interrupt, IRQF_DISABLED|IRQF_SHARED,
"CS4281", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_cs4281_free(chip);
diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c
index 5c21144..894545e 100644
--- a/sound/pci/cs46xx/cs46xx_lib.c
+++ b/sound/pci/cs46xx/cs46xx_lib.c
@@ -3853,7 +3853,7 @@
}
}
- if (request_irq(pci->irq, snd_cs46xx_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, snd_cs46xx_interrupt, IRQF_DISABLED|IRQF_SHARED,
"CS46XX", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_cs46xx_free(chip);
diff --git a/sound/pci/cs5535audio/cs5535audio.c b/sound/pci/cs5535audio/cs5535audio.c
index 91c18a1..c12b24c 100644
--- a/sound/pci/cs5535audio/cs5535audio.c
+++ b/sound/pci/cs5535audio/cs5535audio.c
@@ -321,7 +321,7 @@
cs5535au->port = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_cs5535audio_interrupt,
- SA_INTERRUPT|SA_SHIRQ, "CS5535 Audio", cs5535au)) {
+ IRQF_DISABLED|IRQF_SHARED, "CS5535 Audio", cs5535au)) {
snd_printk("unable to grab IRQ %d\n", pci->irq);
err = -EBUSY;
goto sndfail;
diff --git a/sound/pci/echoaudio/echoaudio.c b/sound/pci/echoaudio/echoaudio.c
index 43b408a..27a8dbe 100644
--- a/sound/pci/echoaudio/echoaudio.c
+++ b/sound/pci/echoaudio/echoaudio.c
@@ -1951,7 +1951,7 @@
chip->dsp_registers = (volatile u32 __iomem *)
ioremap_nocache(chip->dsp_registers_phys, sz);
- if (request_irq(pci->irq, snd_echo_interrupt, SA_INTERRUPT | SA_SHIRQ,
+ if (request_irq(pci->irq, snd_echo_interrupt, IRQF_DISABLED | IRQF_SHARED,
ECHOCARD_NAME, (void *)chip)) {
snd_echo_free(chip);
snd_printk(KERN_ERR "cannot grab irq\n");
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index 42a358f..d6f135f 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -1233,7 +1233,7 @@
}
emu->port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_emu10k1_interrupt, SA_INTERRUPT|SA_SHIRQ, "EMU10K1", (void *)emu)) {
+ if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_DISABLED|IRQF_SHARED, "EMU10K1", (void *)emu)) {
err = -EBUSY;
goto error;
}
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 0fb27e4..2167279 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -928,7 +928,7 @@
}
if (request_irq(pci->irq, snd_emu10k1x_interrupt,
- SA_INTERRUPT|SA_SHIRQ, "EMU10K1X",
+ IRQF_DISABLED|IRQF_SHARED, "EMU10K1X",
(void *)chip)) {
snd_printk(KERN_ERR "emu10k1x: cannot grab irq %d\n", pci->irq);
snd_emu10k1x_free(chip);
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index 9d46bbe..7a985c8 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -2135,7 +2135,7 @@
return err;
}
ensoniq->port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_audiopci_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, snd_audiopci_interrupt, IRQF_DISABLED|IRQF_SHARED,
"Ensoniq AudioPCI", ensoniq)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_ensoniq_free(ensoniq);
diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c
index ca6603f..1113b10 100644
--- a/sound/pci/es1938.c
+++ b/sound/pci/es1938.c
@@ -1429,7 +1429,7 @@
pci_restore_state(pci);
pci_enable_device(pci);
request_irq(pci->irq, snd_es1938_interrupt,
- SA_INTERRUPT|SA_SHIRQ, "ES1938", chip);
+ IRQF_DISABLED|IRQF_SHARED, "ES1938", chip);
chip->irq = pci->irq;
snd_es1938_chip_init(chip);
@@ -1544,7 +1544,7 @@
chip->vc_port = pci_resource_start(pci, 2);
chip->mpu_port = pci_resource_start(pci, 3);
chip->game_port = pci_resource_start(pci, 4);
- if (request_irq(pci->irq, snd_es1938_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, snd_es1938_interrupt, IRQF_DISABLED|IRQF_SHARED,
"ES1938", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_es1938_free(chip);
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index bfa0876..a491c8f 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -2597,7 +2597,7 @@
return err;
}
chip->io_port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_es1968_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, snd_es1968_interrupt, IRQF_DISABLED|IRQF_SHARED,
"ESS Maestro", (void*)chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_es1968_free(chip);
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index 0afa573..3aed27e 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -1371,7 +1371,7 @@
return err;
}
chip->port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_fm801_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, snd_fm801_interrupt, IRQF_DISABLED|IRQF_SHARED,
"FM801", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", chip->irq);
snd_fm801_free(chip);
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 4070b5c..025af7c 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1486,7 +1486,7 @@
goto errout;
}
- if (request_irq(pci->irq, azx_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, azx_interrupt, IRQF_DISABLED|IRQF_SHARED,
"HDA Intel", (void*)chip)) {
snd_printk(KERN_ERR SFX "unable to grab IRQ %d\n", pci->irq);
err = -EBUSY;
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 8459071..89a06de 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -2606,7 +2606,7 @@
ice->dmapath_port = pci_resource_start(pci, 2);
ice->profi_port = pci_resource_start(pci, 3);
- if (request_irq(pci->irq, snd_ice1712_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, snd_ice1712_interrupt, IRQF_DISABLED|IRQF_SHARED,
"ICE1712", ice)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_ice1712_free(ice);
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index 34a58c62..ad69ed7 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -2253,7 +2253,7 @@
ice->profi_port = pci_resource_start(pci, 1);
if (request_irq(pci->irq, snd_vt1724_interrupt,
- SA_INTERRUPT|SA_SHIRQ, "ICE1724", ice)) {
+ IRQF_DISABLED|IRQF_SHARED, "ICE1724", ice)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_vt1724_free(ice);
return -EIO;
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index edc1447..5634bc3 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -2475,7 +2475,7 @@
pci_restore_state(pci);
pci_enable_device(pci);
pci_set_master(pci);
- request_irq(pci->irq, snd_intel8x0_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ request_irq(pci->irq, snd_intel8x0_interrupt, IRQF_DISABLED|IRQF_SHARED,
card->shortname, chip);
chip->irq = pci->irq;
synchronize_irq(chip->irq);
@@ -2848,7 +2848,7 @@
/* request irq after initializaing int_sta_mask, etc */
if (request_irq(pci->irq, snd_intel8x0_interrupt,
- SA_INTERRUPT|SA_SHIRQ, card->shortname, chip)) {
+ IRQF_DISABLED|IRQF_SHARED, card->shortname, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_intel8x0_free(chip);
return -EBUSY;
diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c
index 24703d7..f28e273 100644
--- a/sound/pci/intel8x0m.c
+++ b/sound/pci/intel8x0m.c
@@ -1185,7 +1185,7 @@
}
port_inited:
- if (request_irq(pci->irq, snd_intel8x0_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, snd_intel8x0_interrupt, IRQF_DISABLED|IRQF_SHARED,
card->shortname, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_intel8x0_free(chip);
diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c
index 6e97932..2b4ce00 100644
--- a/sound/pci/korg1212/korg1212.c
+++ b/sound/pci/korg1212/korg1212.c
@@ -2237,7 +2237,7 @@
}
err = request_irq(pci->irq, snd_korg1212_interrupt,
- SA_INTERRUPT|SA_SHIRQ,
+ IRQF_DISABLED|IRQF_SHARED,
"korg1212", korg1212);
if (err) {
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 1c344fb..828eab5 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -2760,7 +2760,7 @@
tasklet_init(&chip->hwvol_tq, snd_m3_update_hw_volume, (unsigned long)chip);
- if (request_irq(pci->irq, snd_m3_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, snd_m3_interrupt, IRQF_DISABLED|IRQF_SHARED,
card->driver, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_m3_free(chip);
diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c
index 366c4a7..a4aaa7b 100644
--- a/sound/pci/mixart/mixart.c
+++ b/sound/pci/mixart/mixart.c
@@ -1319,7 +1319,7 @@
pci_resource_len(pci, i));
}
- if (request_irq(pci->irq, snd_mixart_interrupt, SA_INTERRUPT|SA_SHIRQ, CARD_NAME, (void *)mgr)) {
+ if (request_irq(pci->irq, snd_mixart_interrupt, IRQF_DISABLED|IRQF_SHARED, CARD_NAME, (void *)mgr)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_mixart_free(mgr);
return -EBUSY;
diff --git a/sound/pci/nm256/nm256.c b/sound/pci/nm256/nm256.c
index b92d660..56d7282 100644
--- a/sound/pci/nm256/nm256.c
+++ b/sound/pci/nm256/nm256.c
@@ -465,7 +465,7 @@
{
mutex_lock(&chip->irq_mutex);
if (chip->irq < 0) {
- if (request_irq(chip->pci->irq, chip->interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(chip->pci->irq, chip->interrupt, IRQF_DISABLED|IRQF_SHARED,
chip->card->driver, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", chip->pci->irq);
mutex_unlock(&chip->irq_mutex);
diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c
index 8198884..ae980e1 100644
--- a/sound/pci/pcxhr/pcxhr.c
+++ b/sound/pci/pcxhr/pcxhr.c
@@ -1250,7 +1250,7 @@
mgr->pci = pci;
mgr->irq = -1;
- if (request_irq(pci->irq, pcxhr_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, pcxhr_interrupt, IRQF_DISABLED|IRQF_SHARED,
card_name, mgr)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
pcxhr_free(mgr);
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index 5618ec9..5501a08 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -1892,7 +1892,7 @@
UNSET_AIE(hwport);
if (request_irq
- (pci->irq, snd_riptide_interrupt, SA_INTERRUPT | SA_SHIRQ,
+ (pci->irq, snd_riptide_interrupt, IRQF_DISABLED | IRQF_SHARED,
"RIPTIDE", chip)) {
snd_printk(KERN_ERR "Riptide: unable to grab IRQ %d\n",
pci->irq);
diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c
index 2cb9fe9..2e24b68 100644
--- a/sound/pci/rme32.c
+++ b/sound/pci/rme32.c
@@ -1374,7 +1374,7 @@
return -ENOMEM;
}
- if (request_irq(pci->irq, snd_rme32_interrupt, SA_INTERRUPT | SA_SHIRQ, "RME32", (void *) rme32)) {
+ if (request_irq(pci->irq, snd_rme32_interrupt, IRQF_DISABLED | IRQF_SHARED, "RME32", (void *) rme32)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
return -EBUSY;
}
diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c
index 991cb18..fde0f3e 100644
--- a/sound/pci/rme96.c
+++ b/sound/pci/rme96.c
@@ -1588,7 +1588,7 @@
return -ENOMEM;
}
- if (request_irq(pci->irq, snd_rme96_interrupt, SA_INTERRUPT|SA_SHIRQ, "RME96", (void *)rme96)) {
+ if (request_irq(pci->irq, snd_rme96_interrupt, IRQF_DISABLED|IRQF_SHARED, "RME96", (void *)rme96)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
return -EBUSY;
}
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index eaf3c22..99cf862 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -4912,7 +4912,7 @@
return -EBUSY;
}
- if (request_irq(pci->irq, snd_hdsp_interrupt, SA_INTERRUPT|SA_SHIRQ, "hdsp", (void *)hdsp)) {
+ if (request_irq(pci->irq, snd_hdsp_interrupt, IRQF_DISABLED|IRQF_SHARED, "hdsp", (void *)hdsp)) {
snd_printk(KERN_ERR "Hammerfall-DSP: unable to use IRQ %d\n", pci->irq);
return -EBUSY;
}
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index bba1615..7d03ae0 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -3497,7 +3497,7 @@
hdspm->port + io_extent - 1);
if (request_irq(pci->irq, snd_hdspm_interrupt,
- SA_INTERRUPT | SA_SHIRQ, "hdspm",
+ IRQF_DISABLED | IRQF_SHARED, "hdspm",
(void *) hdspm)) {
snd_printk(KERN_ERR "HDSPM: unable to use IRQ %d\n", pci->irq);
return -EBUSY;
diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c
index 3b945e8..9534e18 100644
--- a/sound/pci/rme9652/rme9652.c
+++ b/sound/pci/rme9652/rme9652.c
@@ -2500,7 +2500,7 @@
return -EBUSY;
}
- if (request_irq(pci->irq, snd_rme9652_interrupt, SA_INTERRUPT|SA_SHIRQ, "rme9652", (void *)rme9652)) {
+ if (request_irq(pci->irq, snd_rme9652_interrupt, IRQF_DISABLED|IRQF_SHARED, "rme9652", (void *)rme9652)) {
snd_printk(KERN_ERR "unable to request IRQ %d\n", pci->irq);
return -EBUSY;
}
diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c
index e551160..c430341 100644
--- a/sound/pci/sonicvibes.c
+++ b/sound/pci/sonicvibes.c
@@ -1257,7 +1257,7 @@
sonic->midi_port = pci_resource_start(pci, 3);
sonic->game_port = pci_resource_start(pci, 4);
- if (request_irq(pci->irq, snd_sonicvibes_interrupt, SA_INTERRUPT|SA_SHIRQ, "S3 SonicVibes", (void *)sonic)) {
+ if (request_irq(pci->irq, snd_sonicvibes_interrupt, IRQF_DISABLED|IRQF_SHARED, "S3 SonicVibes", (void *)sonic)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_sonicvibes_free(sonic);
return -EBUSY;
diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c
index d99ed72..4930cc6 100644
--- a/sound/pci/trident/trident_main.c
+++ b/sound/pci/trident/trident_main.c
@@ -3599,7 +3599,7 @@
}
trident->port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_trident_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, snd_trident_interrupt, IRQF_DISABLED|IRQF_SHARED,
"Trident Audio", trident)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_trident_free(trident);
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 2527bbd..37bd5eb 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -2281,7 +2281,7 @@
if (request_irq(pci->irq,
chip_type == TYPE_VIA8233 ?
snd_via8233_interrupt : snd_via686_interrupt,
- SA_INTERRUPT|SA_SHIRQ,
+ IRQF_DISABLED|IRQF_SHARED,
card->driver, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_via82xx_free(chip);
diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c
index 577a2b0..c1ede6c 100644
--- a/sound/pci/via82xx_modem.c
+++ b/sound/pci/via82xx_modem.c
@@ -1118,7 +1118,7 @@
return err;
}
chip->port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_via82xx_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, snd_via82xx_interrupt, IRQF_DISABLED|IRQF_SHARED,
card->driver, chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_via82xx_free(chip);
diff --git a/sound/pci/vx222/vx222.c b/sound/pci/vx222/vx222.c
index 0f1ebb0..7deda25 100644
--- a/sound/pci/vx222/vx222.c
+++ b/sound/pci/vx222/vx222.c
@@ -162,7 +162,7 @@
for (i = 0; i < 2; i++)
vx->port[i] = pci_resource_start(pci, i + 1);
- if (request_irq(pci->irq, snd_vx_irq_handler, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, snd_vx_irq_handler, IRQF_DISABLED|IRQF_SHARED,
CARD_NAME, (void *) chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_vx222_free(chip);
diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c
index f894752..a55b5fd 100644
--- a/sound/pci/ymfpci/ymfpci_main.c
+++ b/sound/pci/ymfpci/ymfpci_main.c
@@ -2288,7 +2288,7 @@
snd_ymfpci_free(chip);
return -EBUSY;
}
- if (request_irq(pci->irq, snd_ymfpci_interrupt, SA_INTERRUPT|SA_SHIRQ, "YMFPCI", (void *) chip)) {
+ if (request_irq(pci->irq, snd_ymfpci_interrupt, IRQF_DISABLED|IRQF_SHARED, "YMFPCI", (void *) chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_ymfpci_free(chip);
return -EBUSY;
diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index be98f63..90db9a1 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -1170,7 +1170,7 @@
chip->rsrc[i].start + 1,
rnames[i]) == NULL) {
printk(KERN_ERR "snd: can't request rsrc "
- " %d (%s: 0x%016lx:%016lx)\n",
+ " %d (%s: 0x%016llx:%016llx)\n",
i, rnames[i],
(unsigned long long)chip->rsrc[i].start,
(unsigned long long)chip->rsrc[i].end);
diff --git a/sound/sparc/amd7930.c b/sound/sparc/amd7930.c
index ba1b2a3..db3e22e 100644
--- a/sound/sparc/amd7930.c
+++ b/sound/sparc/amd7930.c
@@ -973,7 +973,7 @@
amd7930_idle(amd);
if (request_irq(irq, snd_amd7930_interrupt,
- SA_INTERRUPT | SA_SHIRQ, "amd7930", amd)) {
+ IRQF_DISABLED | IRQF_SHARED, "amd7930", amd)) {
snd_printk("amd7930-%d: Unable to grab IRQ %d\n",
dev, irq);
snd_amd7930_free(amd);
diff --git a/sound/sparc/cs4231.c b/sound/sparc/cs4231.c
index 44ad961..5018fcf 100644
--- a/sound/sparc/cs4231.c
+++ b/sound/sparc/cs4231.c
@@ -2001,7 +2001,7 @@
chip->c_dma.preallocate = sbus_dma_preallocate;
if (request_irq(sdev->irqs[0], snd_cs4231_sbus_interrupt,
- SA_SHIRQ, "cs4231", chip)) {
+ IRQF_SHARED, "cs4231", chip)) {
snd_printdd("cs4231-%d: Unable to grab SBUS IRQ %d\n",
dev, sdev->irqs[0]);
snd_cs4231_sbus_free(chip);
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index 63bef0a..59a02a0 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -2569,7 +2569,7 @@
return -EIO;
}
- err = request_irq(dbri->irq, snd_dbri_interrupt, SA_SHIRQ,
+ err = request_irq(dbri->irq, snd_dbri_interrupt, IRQF_SHARED,
"DBRI audio", dbri);
if (err) {
printk(KERN_ERR "DBRI: Can't get irq %d\n", dbri->irq);