| * Renesas R-Car Compare Match Timer (CMT) |
| |
| The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock |
| inputs and programmable compare match. |
| |
| Channels share hardware resources but their counter and compare match value |
| are independent. A particular CMT instance can implement only a subset of the |
| channels supported by the CMT model. Channel indices represent the hardware |
| position of the channel in the CMT and don't match the channel numbers in the |
| datasheets. |
| |
| Required Properties: |
| |
| - compatible: must contain one or more of the following: |
| - "renesas,cmt-48-sh73a0" for the sh73A0 48-bit CMT |
| (CMT1) |
| - "renesas,cmt-48-r8a7740" for the r8a7740 48-bit CMT |
| (CMT1) |
| - "renesas,cmt-48" for all non-second generation 48-bit CMT |
| (CMT1 on sh73a0 and r8a7740) |
| This is a fallback for the above renesas,cmt-48-* entries. |
| |
| - "renesas,r8a73a4-cmt0" for the 32-bit CMT0 device included in r8a73a4. |
| - "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4. |
| - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790. |
| - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790. |
| - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791. |
| - "renesas,r8a7791-cmt1" for the 48-bit CMT1 device included in r8a7791. |
| - "renesas,r8a7793-cmt0" for the 32-bit CMT0 device included in r8a7793. |
| - "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793. |
| - "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794. |
| - "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794. |
| |
| - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2. |
| - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2. |
| These are fallbacks for r8a73a4 and all the R-Car Gen2 |
| entries listed above. |
| |
| - reg: base address and length of the registers block for the timer module. |
| - interrupts: interrupt-specifier for the timer, one per channel. |
| - clocks: a list of phandle + clock-specifier pairs, one for each entry |
| in clock-names. |
| - clock-names: must contain "fck" for the functional clock. |
| |
| |
| Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes |
| |
| cmt0: timer@ffca0000 { |
| compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0"; |
| reg = <0 0xffca0000 0 0x1004>; |
| interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, |
| <0 142 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&mstp1_clks R8A7790_CLK_CMT0>; |
| clock-names = "fck"; |
| }; |
| |
| cmt1: timer@e6130000 { |
| compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1"; |
| reg = <0 0xe6130000 0 0x1004>; |
| interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, |
| <0 121 IRQ_TYPE_LEVEL_HIGH>, |
| <0 122 IRQ_TYPE_LEVEL_HIGH>, |
| <0 123 IRQ_TYPE_LEVEL_HIGH>, |
| <0 124 IRQ_TYPE_LEVEL_HIGH>, |
| <0 125 IRQ_TYPE_LEVEL_HIGH>, |
| <0 126 IRQ_TYPE_LEVEL_HIGH>, |
| <0 127 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&mstp3_clks R8A7790_CLK_CMT1>; |
| clock-names = "fck"; |
| }; |