| /* |
| * SCSI Enclosure Services |
| * |
| * Copyright (C) 2008 James Bottomley <James.Bottomley@HansenPartnership.com> |
| * |
| **----------------------------------------------------------------------------- |
| ** |
| ** This program is free software; you can redistribute it and/or |
| ** modify it under the terms of the GNU General Public License |
| ** version 2 as published by the Free Software Foundation. |
| ** |
| ** This program is distributed in the hope that it will be useful, |
| ** but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ** GNU General Public License for more details. |
| ** |
| ** You should have received a copy of the GNU General Public License |
| ** along with this program; if not, write to the Free Software |
| ** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| ** |
| **----------------------------------------------------------------------------- |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/enclosure.h> |
| #include <asm/unaligned.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_dbg.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_driver.h> |
| #include <scsi/scsi_host.h> |
| |
| #include <scsi/scsi_transport_sas.h> |
| |
| struct ses_device { |
| unsigned char *page1; |
| unsigned char *page1_types; |
| unsigned char *page2; |
| unsigned char *page10; |
| short page1_len; |
| short page1_num_types; |
| short page2_len; |
| short page10_len; |
| }; |
| |
| struct ses_component { |
| u64 addr; |
| }; |
| |
| static bool ses_page2_supported(struct enclosure_device *edev) |
| { |
| struct ses_device *ses_dev = edev->scratch; |
| |
| return (ses_dev->page2 != NULL); |
| } |
| |
| static int ses_probe(struct device *dev) |
| { |
| struct scsi_device *sdev = to_scsi_device(dev); |
| int err = -ENODEV; |
| |
| if (sdev->type != TYPE_ENCLOSURE) |
| goto out; |
| |
| err = 0; |
| sdev_printk(KERN_NOTICE, sdev, "Attached Enclosure device\n"); |
| |
| out: |
| return err; |
| } |
| |
| #define SES_TIMEOUT (30 * HZ) |
| #define SES_RETRIES 3 |
| |
| static void init_device_slot_control(unsigned char *dest_desc, |
| struct enclosure_component *ecomp, |
| unsigned char *status) |
| { |
| memcpy(dest_desc, status, 4); |
| dest_desc[0] = 0; |
| /* only clear byte 1 for ENCLOSURE_COMPONENT_DEVICE */ |
| if (ecomp->type == ENCLOSURE_COMPONENT_DEVICE) |
| dest_desc[1] = 0; |
| dest_desc[2] &= 0xde; |
| dest_desc[3] &= 0x3c; |
| } |
| |
| |
| static int ses_recv_diag(struct scsi_device *sdev, int page_code, |
| void *buf, int bufflen) |
| { |
| int ret; |
| unsigned char cmd[] = { |
| RECEIVE_DIAGNOSTIC, |
| 1, /* Set PCV bit */ |
| page_code, |
| bufflen >> 8, |
| bufflen & 0xff, |
| 0 |
| }; |
| unsigned char recv_page_code; |
| unsigned int retries = SES_RETRIES; |
| struct scsi_sense_hdr sshdr; |
| |
| do { |
| ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, |
| &sshdr, SES_TIMEOUT, 1, NULL); |
| } while (ret > 0 && --retries && scsi_sense_valid(&sshdr) && |
| (sshdr.sense_key == NOT_READY || |
| (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29))); |
| |
| if (unlikely(ret)) |
| return ret; |
| |
| recv_page_code = ((unsigned char *)buf)[0]; |
| |
| if (likely(recv_page_code == page_code)) |
| return ret; |
| |
| /* successful diagnostic but wrong page code. This happens to some |
| * USB devices, just print a message and pretend there was an error */ |
| |
| sdev_printk(KERN_ERR, sdev, |
| "Wrong diagnostic page; asked for %d got %u\n", |
| page_code, recv_page_code); |
| |
| return -EINVAL; |
| } |
| |
| static int ses_send_diag(struct scsi_device *sdev, int page_code, |
| void *buf, int bufflen) |
| { |
| int result; |
| |
| unsigned char cmd[] = { |
| SEND_DIAGNOSTIC, |
| 0x10, /* Set PF bit */ |
| 0, |
| bufflen >> 8, |
| bufflen & 0xff, |
| 0 |
| }; |
| struct scsi_sense_hdr sshdr; |
| unsigned int retries = SES_RETRIES; |
| |
| do { |
| result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen, |
| &sshdr, SES_TIMEOUT, 1, NULL); |
| } while (result > 0 && --retries && scsi_sense_valid(&sshdr) && |
| (sshdr.sense_key == NOT_READY || |
| (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29))); |
| |
| if (result) |
| sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n", |
| result); |
| return result; |
| } |
| |
| static int ses_set_page2_descriptor(struct enclosure_device *edev, |
| struct enclosure_component *ecomp, |
| unsigned char *desc) |
| { |
| int i, j, count = 0, descriptor = ecomp->number; |
| struct scsi_device *sdev = to_scsi_device(edev->edev.parent); |
| struct ses_device *ses_dev = edev->scratch; |
| unsigned char *type_ptr = ses_dev->page1_types; |
| unsigned char *desc_ptr = ses_dev->page2 + 8; |
| |
| /* Clear everything */ |
| memset(desc_ptr, 0, ses_dev->page2_len - 8); |
| for (i = 0; i < ses_dev->page1_num_types; i++, type_ptr += 4) { |
| for (j = 0; j < type_ptr[1]; j++) { |
| desc_ptr += 4; |
| if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE && |
| type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE) |
| continue; |
| if (count++ == descriptor) { |
| memcpy(desc_ptr, desc, 4); |
| /* set select */ |
| desc_ptr[0] |= 0x80; |
| /* clear reserved, just in case */ |
| desc_ptr[0] &= 0xf0; |
| } |
| } |
| } |
| |
| return ses_send_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len); |
| } |
| |
| static unsigned char *ses_get_page2_descriptor(struct enclosure_device *edev, |
| struct enclosure_component *ecomp) |
| { |
| int i, j, count = 0, descriptor = ecomp->number; |
| struct scsi_device *sdev = to_scsi_device(edev->edev.parent); |
| struct ses_device *ses_dev = edev->scratch; |
| unsigned char *type_ptr = ses_dev->page1_types; |
| unsigned char *desc_ptr = ses_dev->page2 + 8; |
| |
| if (ses_recv_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len) < 0) |
| return NULL; |
| |
| for (i = 0; i < ses_dev->page1_num_types; i++, type_ptr += 4) { |
| for (j = 0; j < type_ptr[1]; j++) { |
| desc_ptr += 4; |
| if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE && |
| type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE) |
| continue; |
| if (count++ == descriptor) |
| return desc_ptr; |
| } |
| } |
| return NULL; |
| } |
| |
| /* For device slot and array device slot elements, byte 3 bit 6 |
| * is "fault sensed" while byte 3 bit 5 is "fault reqstd". As this |
| * code stands these bits are shifted 4 positions right so in |
| * sysfs they will appear as bits 2 and 1 respectively. Strange. */ |
| static void ses_get_fault(struct enclosure_device *edev, |
| struct enclosure_component *ecomp) |
| { |
| unsigned char *desc; |
| |
| if (!ses_page2_supported(edev)) { |
| ecomp->fault = 0; |
| return; |
| } |
| desc = ses_get_page2_descriptor(edev, ecomp); |
| if (desc) |
| ecomp->fault = (desc[3] & 0x60) >> 4; |
| } |
| |
| static int ses_set_fault(struct enclosure_device *edev, |
| struct enclosure_component *ecomp, |
| enum enclosure_component_setting val) |
| { |
| unsigned char desc[4]; |
| unsigned char *desc_ptr; |
| |
| if (!ses_page2_supported(edev)) |
| return -EINVAL; |
| |
| desc_ptr = ses_get_page2_descriptor(edev, ecomp); |
| |
| if (!desc_ptr) |
| return -EIO; |
| |
| init_device_slot_control(desc, ecomp, desc_ptr); |
| |
| switch (val) { |
| case ENCLOSURE_SETTING_DISABLED: |
| desc[3] &= 0xdf; |
| break; |
| case ENCLOSURE_SETTING_ENABLED: |
| desc[3] |= 0x20; |
| break; |
| default: |
| /* SES doesn't do the SGPIO blink settings */ |
| return -EINVAL; |
| } |
| |
| return ses_set_page2_descriptor(edev, ecomp, desc); |
| } |
| |
| static void ses_get_status(struct enclosure_device *edev, |
| struct enclosure_component *ecomp) |
| { |
| unsigned char *desc; |
| |
| if (!ses_page2_supported(edev)) { |
| ecomp->status = 0; |
| return; |
| } |
| desc = ses_get_page2_descriptor(edev, ecomp); |
| if (desc) |
| ecomp->status = (desc[0] & 0x0f); |
| } |
| |
| static void ses_get_locate(struct enclosure_device *edev, |
| struct enclosure_component *ecomp) |
| { |
| unsigned char *desc; |
| |
| if (!ses_page2_supported(edev)) { |
| ecomp->locate = 0; |
| return; |
| } |
| desc = ses_get_page2_descriptor(edev, ecomp); |
| if (desc) |
| ecomp->locate = (desc[2] & 0x02) ? 1 : 0; |
| } |
| |
| static int ses_set_locate(struct enclosure_device *edev, |
| struct enclosure_component *ecomp, |
| enum enclosure_component_setting val) |
| { |
| unsigned char desc[4]; |
| unsigned char *desc_ptr; |
| |
| if (!ses_page2_supported(edev)) |
| return -EINVAL; |
| |
| desc_ptr = ses_get_page2_descriptor(edev, ecomp); |
| |
| if (!desc_ptr) |
| return -EIO; |
| |
| init_device_slot_control(desc, ecomp, desc_ptr); |
| |
| switch (val) { |
| case ENCLOSURE_SETTING_DISABLED: |
| desc[2] &= 0xfd; |
| break; |
| case ENCLOSURE_SETTING_ENABLED: |
| desc[2] |= 0x02; |
| break; |
| default: |
| /* SES doesn't do the SGPIO blink settings */ |
| return -EINVAL; |
| } |
| return ses_set_page2_descriptor(edev, ecomp, desc); |
| } |
| |
| static int ses_set_active(struct enclosure_device *edev, |
| struct enclosure_component *ecomp, |
| enum enclosure_component_setting val) |
| { |
| unsigned char desc[4]; |
| unsigned char *desc_ptr; |
| |
| if (!ses_page2_supported(edev)) |
| return -EINVAL; |
| |
| desc_ptr = ses_get_page2_descriptor(edev, ecomp); |
| |
| if (!desc_ptr) |
| return -EIO; |
| |
| init_device_slot_control(desc, ecomp, desc_ptr); |
| |
| switch (val) { |
| case ENCLOSURE_SETTING_DISABLED: |
| desc[2] &= 0x7f; |
| ecomp->active = 0; |
| break; |
| case ENCLOSURE_SETTING_ENABLED: |
| desc[2] |= 0x80; |
| ecomp->active = 1; |
| break; |
| default: |
| /* SES doesn't do the SGPIO blink settings */ |
| return -EINVAL; |
| } |
| return ses_set_page2_descriptor(edev, ecomp, desc); |
| } |
| |
| static int ses_show_id(struct enclosure_device *edev, char *buf) |
| { |
| struct ses_device *ses_dev = edev->scratch; |
| unsigned long long id = get_unaligned_be64(ses_dev->page1+8+4); |
| |
| return sprintf(buf, "%#llx\n", id); |
| } |
| |
| static void ses_get_power_status(struct enclosure_device *edev, |
| struct enclosure_component *ecomp) |
| { |
| unsigned char *desc; |
| |
| if (!ses_page2_supported(edev)) { |
| ecomp->power_status = 0; |
| return; |
| } |
| |
| desc = ses_get_page2_descriptor(edev, ecomp); |
| if (desc) |
| ecomp->power_status = (desc[3] & 0x10) ? 0 : 1; |
| } |
| |
| static int ses_set_power_status(struct enclosure_device *edev, |
| struct enclosure_component *ecomp, |
| int val) |
| { |
| unsigned char desc[4]; |
| unsigned char *desc_ptr; |
| |
| if (!ses_page2_supported(edev)) |
| return -EINVAL; |
| |
| desc_ptr = ses_get_page2_descriptor(edev, ecomp); |
| |
| if (!desc_ptr) |
| return -EIO; |
| |
| init_device_slot_control(desc, ecomp, desc_ptr); |
| |
| switch (val) { |
| /* power = 1 is device_off = 0 and vice versa */ |
| case 0: |
| desc[3] |= 0x10; |
| break; |
| case 1: |
| desc[3] &= 0xef; |
| break; |
| default: |
| return -EINVAL; |
| } |
| ecomp->power_status = val; |
| return ses_set_page2_descriptor(edev, ecomp, desc); |
| } |
| |
| static struct enclosure_component_callbacks ses_enclosure_callbacks = { |
| .get_fault = ses_get_fault, |
| .set_fault = ses_set_fault, |
| .get_status = ses_get_status, |
| .get_locate = ses_get_locate, |
| .set_locate = ses_set_locate, |
| .get_power_status = ses_get_power_status, |
| .set_power_status = ses_set_power_status, |
| .set_active = ses_set_active, |
| .show_id = ses_show_id, |
| }; |
| |
| struct ses_host_edev { |
| struct Scsi_Host *shost; |
| struct enclosure_device *edev; |
| }; |
| |
| #if 0 |
| int ses_match_host(struct enclosure_device *edev, void *data) |
| { |
| struct ses_host_edev *sed = data; |
| struct scsi_device *sdev; |
| |
| if (!scsi_is_sdev_device(edev->edev.parent)) |
| return 0; |
| |
| sdev = to_scsi_device(edev->edev.parent); |
| |
| if (sdev->host != sed->shost) |
| return 0; |
| |
| sed->edev = edev; |
| return 1; |
| } |
| #endif /* 0 */ |
| |
| static void ses_process_descriptor(struct enclosure_component *ecomp, |
| unsigned char *desc) |
| { |
| int eip = desc[0] & 0x10; |
| int invalid = desc[0] & 0x80; |
| enum scsi_protocol proto = desc[0] & 0x0f; |
| u64 addr = 0; |
| int slot = -1; |
| struct ses_component *scomp = ecomp->scratch; |
| unsigned char *d; |
| |
| if (invalid) |
| return; |
| |
| switch (proto) { |
| case SCSI_PROTOCOL_FCP: |
| if (eip) { |
| d = desc + 4; |
| slot = d[3]; |
| } |
| break; |
| case SCSI_PROTOCOL_SAS: |
| if (eip) { |
| d = desc + 4; |
| slot = d[3]; |
| d = desc + 8; |
| } else |
| d = desc + 4; |
| /* only take the phy0 addr */ |
| addr = (u64)d[12] << 56 | |
| (u64)d[13] << 48 | |
| (u64)d[14] << 40 | |
| (u64)d[15] << 32 | |
| (u64)d[16] << 24 | |
| (u64)d[17] << 16 | |
| (u64)d[18] << 8 | |
| (u64)d[19]; |
| break; |
| default: |
| /* FIXME: Need to add more protocols than just SAS */ |
| break; |
| } |
| ecomp->slot = slot; |
| scomp->addr = addr; |
| } |
| |
| struct efd { |
| u64 addr; |
| struct device *dev; |
| }; |
| |
| static int ses_enclosure_find_by_addr(struct enclosure_device *edev, |
| void *data) |
| { |
| struct efd *efd = data; |
| int i; |
| struct ses_component *scomp; |
| |
| if (!edev->component[0].scratch) |
| return 0; |
| |
| for (i = 0; i < edev->components; i++) { |
| scomp = edev->component[i].scratch; |
| if (scomp->addr != efd->addr) |
| continue; |
| |
| if (enclosure_add_device(edev, i, efd->dev) == 0) |
| kobject_uevent(&efd->dev->kobj, KOBJ_CHANGE); |
| return 1; |
| } |
| return 0; |
| } |
| |
| #define INIT_ALLOC_SIZE 32 |
| |
| static void ses_enclosure_data_process(struct enclosure_device *edev, |
| struct scsi_device *sdev, |
| int create) |
| { |
| u32 result; |
| unsigned char *buf = NULL, *type_ptr, *desc_ptr, *addl_desc_ptr = NULL; |
| int i, j, page7_len, len, components; |
| struct ses_device *ses_dev = edev->scratch; |
| int types = ses_dev->page1_num_types; |
| unsigned char *hdr_buf = kzalloc(INIT_ALLOC_SIZE, GFP_KERNEL); |
| |
| if (!hdr_buf) |
| goto simple_populate; |
| |
| /* re-read page 10 */ |
| if (ses_dev->page10) |
| ses_recv_diag(sdev, 10, ses_dev->page10, ses_dev->page10_len); |
| /* Page 7 for the descriptors is optional */ |
| result = ses_recv_diag(sdev, 7, hdr_buf, INIT_ALLOC_SIZE); |
| if (result) |
| goto simple_populate; |
| |
| page7_len = len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; |
| /* add 1 for trailing '\0' we'll use */ |
| buf = kzalloc(len + 1, GFP_KERNEL); |
| if (!buf) |
| goto simple_populate; |
| result = ses_recv_diag(sdev, 7, buf, len); |
| if (result) { |
| simple_populate: |
| kfree(buf); |
| buf = NULL; |
| desc_ptr = NULL; |
| len = 0; |
| page7_len = 0; |
| } else { |
| desc_ptr = buf + 8; |
| len = (desc_ptr[2] << 8) + desc_ptr[3]; |
| /* skip past overall descriptor */ |
| desc_ptr += len + 4; |
| } |
| if (ses_dev->page10) |
| addl_desc_ptr = ses_dev->page10 + 8; |
| type_ptr = ses_dev->page1_types; |
| components = 0; |
| for (i = 0; i < types; i++, type_ptr += 4) { |
| for (j = 0; j < type_ptr[1]; j++) { |
| char *name = NULL; |
| struct enclosure_component *ecomp; |
| |
| if (desc_ptr) { |
| if (desc_ptr >= buf + page7_len) { |
| desc_ptr = NULL; |
| } else { |
| len = (desc_ptr[2] << 8) + desc_ptr[3]; |
| desc_ptr += 4; |
| /* Add trailing zero - pushes into |
| * reserved space */ |
| desc_ptr[len] = '\0'; |
| name = desc_ptr; |
| } |
| } |
| if (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE || |
| type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE) { |
| |
| if (create) |
| ecomp = enclosure_component_alloc( |
| edev, |
| components++, |
| type_ptr[0], |
| name); |
| else |
| ecomp = &edev->component[components++]; |
| |
| if (!IS_ERR(ecomp)) { |
| if (addl_desc_ptr) |
| ses_process_descriptor( |
| ecomp, |
| addl_desc_ptr); |
| if (create) |
| enclosure_component_register( |
| ecomp); |
| } |
| } |
| if (desc_ptr) |
| desc_ptr += len; |
| |
| if (addl_desc_ptr && |
| /* only find additional descriptions for specific devices */ |
| (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE || |
| type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE || |
| type_ptr[0] == ENCLOSURE_COMPONENT_SAS_EXPANDER || |
| /* these elements are optional */ |
| type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_TARGET_PORT || |
| type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_INITIATOR_PORT || |
| type_ptr[0] == ENCLOSURE_COMPONENT_CONTROLLER_ELECTRONICS)) |
| addl_desc_ptr += addl_desc_ptr[1] + 2; |
| |
| } |
| } |
| kfree(buf); |
| kfree(hdr_buf); |
| } |
| |
| static void ses_match_to_enclosure(struct enclosure_device *edev, |
| struct scsi_device *sdev, |
| int refresh) |
| { |
| struct scsi_device *edev_sdev = to_scsi_device(edev->edev.parent); |
| struct efd efd = { |
| .addr = 0, |
| }; |
| |
| if (refresh) |
| ses_enclosure_data_process(edev, edev_sdev, 0); |
| |
| if (scsi_is_sas_rphy(sdev->sdev_target->dev.parent)) |
| efd.addr = sas_get_address(sdev); |
| |
| if (efd.addr) { |
| efd.dev = &sdev->sdev_gendev; |
| |
| enclosure_for_each_device(ses_enclosure_find_by_addr, &efd); |
| } |
| } |
| |
| static int ses_intf_add(struct device *cdev, |
| struct class_interface *intf) |
| { |
| struct scsi_device *sdev = to_scsi_device(cdev->parent); |
| struct scsi_device *tmp_sdev; |
| unsigned char *buf = NULL, *hdr_buf, *type_ptr, page; |
| struct ses_device *ses_dev; |
| u32 result; |
| int i, types, len, components = 0; |
| int err = -ENOMEM; |
| int num_enclosures; |
| struct enclosure_device *edev; |
| struct ses_component *scomp = NULL; |
| |
| if (!scsi_device_enclosure(sdev)) { |
| /* not an enclosure, but might be in one */ |
| struct enclosure_device *prev = NULL; |
| |
| while ((edev = enclosure_find(&sdev->host->shost_gendev, prev)) != NULL) { |
| ses_match_to_enclosure(edev, sdev, 1); |
| prev = edev; |
| } |
| return -ENODEV; |
| } |
| |
| /* TYPE_ENCLOSURE prints a message in probe */ |
| if (sdev->type != TYPE_ENCLOSURE) |
| sdev_printk(KERN_NOTICE, sdev, "Embedded Enclosure Device\n"); |
| |
| ses_dev = kzalloc(sizeof(*ses_dev), GFP_KERNEL); |
| hdr_buf = kzalloc(INIT_ALLOC_SIZE, GFP_KERNEL); |
| if (!hdr_buf || !ses_dev) |
| goto err_init_free; |
| |
| page = 1; |
| result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE); |
| if (result) |
| goto recv_failed; |
| |
| len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; |
| buf = kzalloc(len, GFP_KERNEL); |
| if (!buf) |
| goto err_free; |
| |
| result = ses_recv_diag(sdev, page, buf, len); |
| if (result) |
| goto recv_failed; |
| |
| types = 0; |
| |
| /* we always have one main enclosure and the rest are referred |
| * to as secondary subenclosures */ |
| num_enclosures = buf[1] + 1; |
| |
| /* begin at the enclosure descriptor */ |
| type_ptr = buf + 8; |
| /* skip all the enclosure descriptors */ |
| for (i = 0; i < num_enclosures && type_ptr < buf + len; i++) { |
| types += type_ptr[2]; |
| type_ptr += type_ptr[3] + 4; |
| } |
| |
| ses_dev->page1_types = type_ptr; |
| ses_dev->page1_num_types = types; |
| |
| for (i = 0; i < types && type_ptr < buf + len; i++, type_ptr += 4) { |
| if (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE || |
| type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE) |
| components += type_ptr[1]; |
| } |
| ses_dev->page1 = buf; |
| ses_dev->page1_len = len; |
| buf = NULL; |
| |
| page = 2; |
| result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE); |
| if (result) |
| goto page2_not_supported; |
| |
| len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; |
| buf = kzalloc(len, GFP_KERNEL); |
| if (!buf) |
| goto err_free; |
| |
| /* make sure getting page 2 actually works */ |
| result = ses_recv_diag(sdev, 2, buf, len); |
| if (result) |
| goto recv_failed; |
| ses_dev->page2 = buf; |
| ses_dev->page2_len = len; |
| buf = NULL; |
| |
| /* The additional information page --- allows us |
| * to match up the devices */ |
| page = 10; |
| result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE); |
| if (!result) { |
| |
| len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; |
| buf = kzalloc(len, GFP_KERNEL); |
| if (!buf) |
| goto err_free; |
| |
| result = ses_recv_diag(sdev, page, buf, len); |
| if (result) |
| goto recv_failed; |
| ses_dev->page10 = buf; |
| ses_dev->page10_len = len; |
| buf = NULL; |
| } |
| page2_not_supported: |
| scomp = kzalloc(sizeof(struct ses_component) * components, GFP_KERNEL); |
| if (!scomp) |
| goto err_free; |
| |
| edev = enclosure_register(cdev->parent, dev_name(&sdev->sdev_gendev), |
| components, &ses_enclosure_callbacks); |
| if (IS_ERR(edev)) { |
| err = PTR_ERR(edev); |
| goto err_free; |
| } |
| |
| kfree(hdr_buf); |
| |
| edev->scratch = ses_dev; |
| for (i = 0; i < components; i++) |
| edev->component[i].scratch = scomp + i; |
| |
| ses_enclosure_data_process(edev, sdev, 1); |
| |
| /* see if there are any devices matching before |
| * we found the enclosure */ |
| shost_for_each_device(tmp_sdev, sdev->host) { |
| if (tmp_sdev->lun != 0 || scsi_device_enclosure(tmp_sdev)) |
| continue; |
| ses_match_to_enclosure(edev, tmp_sdev, 0); |
| } |
| |
| return 0; |
| |
| recv_failed: |
| sdev_printk(KERN_ERR, sdev, "Failed to get diagnostic page 0x%x\n", |
| page); |
| err = -ENODEV; |
| err_free: |
| kfree(buf); |
| kfree(scomp); |
| kfree(ses_dev->page10); |
| kfree(ses_dev->page2); |
| kfree(ses_dev->page1); |
| err_init_free: |
| kfree(ses_dev); |
| kfree(hdr_buf); |
| sdev_printk(KERN_ERR, sdev, "Failed to bind enclosure %d\n", err); |
| return err; |
| } |
| |
| static int ses_remove(struct device *dev) |
| { |
| return 0; |
| } |
| |
| static void ses_intf_remove_component(struct scsi_device *sdev) |
| { |
| struct enclosure_device *edev, *prev = NULL; |
| |
| while ((edev = enclosure_find(&sdev->host->shost_gendev, prev)) != NULL) { |
| prev = edev; |
| if (!enclosure_remove_device(edev, &sdev->sdev_gendev)) |
| break; |
| } |
| if (edev) |
| put_device(&edev->edev); |
| } |
| |
| static void ses_intf_remove_enclosure(struct scsi_device *sdev) |
| { |
| struct enclosure_device *edev; |
| struct ses_device *ses_dev; |
| |
| /* exact match to this enclosure */ |
| edev = enclosure_find(&sdev->sdev_gendev, NULL); |
| if (!edev) |
| return; |
| |
| ses_dev = edev->scratch; |
| edev->scratch = NULL; |
| |
| kfree(ses_dev->page10); |
| kfree(ses_dev->page1); |
| kfree(ses_dev->page2); |
| kfree(ses_dev); |
| |
| kfree(edev->component[0].scratch); |
| |
| put_device(&edev->edev); |
| enclosure_unregister(edev); |
| } |
| |
| static void ses_intf_remove(struct device *cdev, |
| struct class_interface *intf) |
| { |
| struct scsi_device *sdev = to_scsi_device(cdev->parent); |
| |
| if (!scsi_device_enclosure(sdev)) |
| ses_intf_remove_component(sdev); |
| else |
| ses_intf_remove_enclosure(sdev); |
| } |
| |
| static struct class_interface ses_interface = { |
| .add_dev = ses_intf_add, |
| .remove_dev = ses_intf_remove, |
| }; |
| |
| static struct scsi_driver ses_template = { |
| .gendrv = { |
| .name = "ses", |
| .owner = THIS_MODULE, |
| .probe = ses_probe, |
| .remove = ses_remove, |
| }, |
| }; |
| |
| static int __init ses_init(void) |
| { |
| int err; |
| |
| err = scsi_register_interface(&ses_interface); |
| if (err) |
| return err; |
| |
| err = scsi_register_driver(&ses_template.gendrv); |
| if (err) |
| goto out_unreg; |
| |
| return 0; |
| |
| out_unreg: |
| scsi_unregister_interface(&ses_interface); |
| return err; |
| } |
| |
| static void __exit ses_exit(void) |
| { |
| scsi_unregister_driver(&ses_template.gendrv); |
| scsi_unregister_interface(&ses_interface); |
| } |
| |
| module_init(ses_init); |
| module_exit(ses_exit); |
| |
| MODULE_ALIAS_SCSI_DEVICE(TYPE_ENCLOSURE); |
| |
| MODULE_AUTHOR("James Bottomley"); |
| MODULE_DESCRIPTION("SCSI Enclosure Services (ses) driver"); |
| MODULE_LICENSE("GPL v2"); |