| /* |
| * OMAP7xx SPI 100k controller driver |
| * Author: Fabrice Crohas <fcrohas@gmail.com> |
| * from original omap1_mcspi driver |
| * |
| * Copyright (C) 2005, 2006 Nokia Corporation |
| * Author: Samuel Ortiz <samuel.ortiz@nokia.com> and |
| * Juha Yrj�l� <juha.yrjola@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/gpio.h> |
| #include <linux/slab.h> |
| |
| #include <linux/spi/spi.h> |
| |
| #define OMAP1_SPI100K_MAX_FREQ 48000000 |
| |
| #define ICR_SPITAS (OMAP7XX_ICR_BASE + 0x12) |
| |
| #define SPI_SETUP1 0x00 |
| #define SPI_SETUP2 0x02 |
| #define SPI_CTRL 0x04 |
| #define SPI_STATUS 0x06 |
| #define SPI_TX_LSB 0x08 |
| #define SPI_TX_MSB 0x0a |
| #define SPI_RX_LSB 0x0c |
| #define SPI_RX_MSB 0x0e |
| |
| #define SPI_SETUP1_INT_READ_ENABLE (1UL << 5) |
| #define SPI_SETUP1_INT_WRITE_ENABLE (1UL << 4) |
| #define SPI_SETUP1_CLOCK_DIVISOR(x) ((x) << 1) |
| #define SPI_SETUP1_CLOCK_ENABLE (1UL << 0) |
| |
| #define SPI_SETUP2_ACTIVE_EDGE_FALLING (0UL << 0) |
| #define SPI_SETUP2_ACTIVE_EDGE_RISING (1UL << 0) |
| #define SPI_SETUP2_NEGATIVE_LEVEL (0UL << 5) |
| #define SPI_SETUP2_POSITIVE_LEVEL (1UL << 5) |
| #define SPI_SETUP2_LEVEL_TRIGGER (0UL << 10) |
| #define SPI_SETUP2_EDGE_TRIGGER (1UL << 10) |
| |
| #define SPI_CTRL_SEN(x) ((x) << 7) |
| #define SPI_CTRL_WORD_SIZE(x) (((x) - 1) << 2) |
| #define SPI_CTRL_WR (1UL << 1) |
| #define SPI_CTRL_RD (1UL << 0) |
| |
| #define SPI_STATUS_WE (1UL << 1) |
| #define SPI_STATUS_RD (1UL << 0) |
| |
| /* use PIO for small transfers, avoiding DMA setup/teardown overhead and |
| * cache operations; better heuristics consider wordsize and bitrate. |
| */ |
| #define DMA_MIN_BYTES 8 |
| |
| #define SPI_RUNNING 0 |
| #define SPI_SHUTDOWN 1 |
| |
| struct omap1_spi100k { |
| struct clk *ick; |
| struct clk *fck; |
| |
| /* Virtual base address of the controller */ |
| void __iomem *base; |
| }; |
| |
| struct omap1_spi100k_cs { |
| void __iomem *base; |
| int word_len; |
| }; |
| |
| static void spi100k_enable_clock(struct spi_master *master) |
| { |
| unsigned int val; |
| struct omap1_spi100k *spi100k = spi_master_get_devdata(master); |
| |
| /* enable SPI */ |
| val = readw(spi100k->base + SPI_SETUP1); |
| val |= SPI_SETUP1_CLOCK_ENABLE; |
| writew(val, spi100k->base + SPI_SETUP1); |
| } |
| |
| static void spi100k_disable_clock(struct spi_master *master) |
| { |
| unsigned int val; |
| struct omap1_spi100k *spi100k = spi_master_get_devdata(master); |
| |
| /* disable SPI */ |
| val = readw(spi100k->base + SPI_SETUP1); |
| val &= ~SPI_SETUP1_CLOCK_ENABLE; |
| writew(val, spi100k->base + SPI_SETUP1); |
| } |
| |
| static void spi100k_write_data(struct spi_master *master, int len, int data) |
| { |
| struct omap1_spi100k *spi100k = spi_master_get_devdata(master); |
| |
| /* write 16-bit word, shifting 8-bit data if necessary */ |
| if (len <= 8) { |
| data <<= 8; |
| len = 16; |
| } |
| |
| spi100k_enable_clock(master); |
| writew(data , spi100k->base + SPI_TX_MSB); |
| |
| writew(SPI_CTRL_SEN(0) | |
| SPI_CTRL_WORD_SIZE(len) | |
| SPI_CTRL_WR, |
| spi100k->base + SPI_CTRL); |
| |
| /* Wait for bit ack send change */ |
| while ((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_WE) != SPI_STATUS_WE) |
| ; |
| udelay(1000); |
| |
| spi100k_disable_clock(master); |
| } |
| |
| static int spi100k_read_data(struct spi_master *master, int len) |
| { |
| int dataH, dataL; |
| struct omap1_spi100k *spi100k = spi_master_get_devdata(master); |
| |
| /* Always do at least 16 bits */ |
| if (len <= 8) |
| len = 16; |
| |
| spi100k_enable_clock(master); |
| writew(SPI_CTRL_SEN(0) | |
| SPI_CTRL_WORD_SIZE(len) | |
| SPI_CTRL_RD, |
| spi100k->base + SPI_CTRL); |
| |
| while ((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_RD) != SPI_STATUS_RD) |
| ; |
| udelay(1000); |
| |
| dataL = readw(spi100k->base + SPI_RX_LSB); |
| dataH = readw(spi100k->base + SPI_RX_MSB); |
| spi100k_disable_clock(master); |
| |
| return dataL; |
| } |
| |
| static void spi100k_open(struct spi_master *master) |
| { |
| /* get control of SPI */ |
| struct omap1_spi100k *spi100k = spi_master_get_devdata(master); |
| |
| writew(SPI_SETUP1_INT_READ_ENABLE | |
| SPI_SETUP1_INT_WRITE_ENABLE | |
| SPI_SETUP1_CLOCK_DIVISOR(0), spi100k->base + SPI_SETUP1); |
| |
| /* configure clock and interrupts */ |
| writew(SPI_SETUP2_ACTIVE_EDGE_FALLING | |
| SPI_SETUP2_NEGATIVE_LEVEL | |
| SPI_SETUP2_LEVEL_TRIGGER, spi100k->base + SPI_SETUP2); |
| } |
| |
| static void omap1_spi100k_force_cs(struct omap1_spi100k *spi100k, int enable) |
| { |
| if (enable) |
| writew(0x05fc, spi100k->base + SPI_CTRL); |
| else |
| writew(0x05fd, spi100k->base + SPI_CTRL); |
| } |
| |
| static unsigned |
| omap1_spi100k_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) |
| { |
| struct omap1_spi100k_cs *cs = spi->controller_state; |
| unsigned int count, c; |
| int word_len; |
| |
| count = xfer->len; |
| c = count; |
| word_len = cs->word_len; |
| |
| if (word_len <= 8) { |
| u8 *rx; |
| const u8 *tx; |
| |
| rx = xfer->rx_buf; |
| tx = xfer->tx_buf; |
| do { |
| c -= 1; |
| if (xfer->tx_buf != NULL) |
| spi100k_write_data(spi->master, word_len, *tx++); |
| if (xfer->rx_buf != NULL) |
| *rx++ = spi100k_read_data(spi->master, word_len); |
| } while (c); |
| } else if (word_len <= 16) { |
| u16 *rx; |
| const u16 *tx; |
| |
| rx = xfer->rx_buf; |
| tx = xfer->tx_buf; |
| do { |
| c -= 2; |
| if (xfer->tx_buf != NULL) |
| spi100k_write_data(spi->master, word_len, *tx++); |
| if (xfer->rx_buf != NULL) |
| *rx++ = spi100k_read_data(spi->master, word_len); |
| } while (c); |
| } else if (word_len <= 32) { |
| u32 *rx; |
| const u32 *tx; |
| |
| rx = xfer->rx_buf; |
| tx = xfer->tx_buf; |
| do { |
| c -= 4; |
| if (xfer->tx_buf != NULL) |
| spi100k_write_data(spi->master, word_len, *tx); |
| if (xfer->rx_buf != NULL) |
| *rx = spi100k_read_data(spi->master, word_len); |
| } while (c); |
| } |
| return count - c; |
| } |
| |
| /* called only when no transfer is active to this device */ |
| static int omap1_spi100k_setup_transfer(struct spi_device *spi, |
| struct spi_transfer *t) |
| { |
| struct omap1_spi100k *spi100k = spi_master_get_devdata(spi->master); |
| struct omap1_spi100k_cs *cs = spi->controller_state; |
| u8 word_len; |
| |
| if (t != NULL) |
| word_len = t->bits_per_word; |
| else |
| word_len = spi->bits_per_word; |
| |
| if (word_len > 32) |
| return -EINVAL; |
| cs->word_len = word_len; |
| |
| /* SPI init before transfer */ |
| writew(0x3e , spi100k->base + SPI_SETUP1); |
| writew(0x00 , spi100k->base + SPI_STATUS); |
| writew(0x3e , spi100k->base + SPI_CTRL); |
| |
| return 0; |
| } |
| |
| /* the spi->mode bits understood by this driver: */ |
| #define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH) |
| |
| static int omap1_spi100k_setup(struct spi_device *spi) |
| { |
| int ret; |
| struct omap1_spi100k *spi100k; |
| struct omap1_spi100k_cs *cs = spi->controller_state; |
| |
| spi100k = spi_master_get_devdata(spi->master); |
| |
| if (!cs) { |
| cs = devm_kzalloc(&spi->dev, sizeof(*cs), GFP_KERNEL); |
| if (!cs) |
| return -ENOMEM; |
| cs->base = spi100k->base + spi->chip_select * 0x14; |
| spi->controller_state = cs; |
| } |
| |
| spi100k_open(spi->master); |
| |
| clk_prepare_enable(spi100k->ick); |
| clk_prepare_enable(spi100k->fck); |
| |
| ret = omap1_spi100k_setup_transfer(spi, NULL); |
| |
| clk_disable_unprepare(spi100k->ick); |
| clk_disable_unprepare(spi100k->fck); |
| |
| return ret; |
| } |
| |
| static int omap1_spi100k_transfer_one_message(struct spi_master *master, |
| struct spi_message *m) |
| { |
| struct omap1_spi100k *spi100k = spi_master_get_devdata(master); |
| struct spi_device *spi = m->spi; |
| struct spi_transfer *t = NULL; |
| int cs_active = 0; |
| int status = 0; |
| |
| list_for_each_entry(t, &m->transfers, transfer_list) { |
| if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { |
| status = -EINVAL; |
| break; |
| } |
| status = omap1_spi100k_setup_transfer(spi, t); |
| if (status < 0) |
| break; |
| |
| if (!cs_active) { |
| omap1_spi100k_force_cs(spi100k, 1); |
| cs_active = 1; |
| } |
| |
| if (t->len) { |
| unsigned count; |
| |
| count = omap1_spi100k_txrx_pio(spi, t); |
| m->actual_length += count; |
| |
| if (count != t->len) { |
| status = -EIO; |
| break; |
| } |
| } |
| |
| if (t->delay_usecs) |
| udelay(t->delay_usecs); |
| |
| /* ignore the "leave it on after last xfer" hint */ |
| |
| if (t->cs_change) { |
| omap1_spi100k_force_cs(spi100k, 0); |
| cs_active = 0; |
| } |
| } |
| |
| status = omap1_spi100k_setup_transfer(spi, NULL); |
| |
| if (cs_active) |
| omap1_spi100k_force_cs(spi100k, 0); |
| |
| m->status = status; |
| |
| spi_finalize_current_message(master); |
| |
| return status; |
| } |
| |
| static int omap1_spi100k_probe(struct platform_device *pdev) |
| { |
| struct spi_master *master; |
| struct omap1_spi100k *spi100k; |
| int status = 0; |
| |
| if (!pdev->id) |
| return -EINVAL; |
| |
| master = spi_alloc_master(&pdev->dev, sizeof(*spi100k)); |
| if (master == NULL) { |
| dev_dbg(&pdev->dev, "master allocation failed\n"); |
| return -ENOMEM; |
| } |
| |
| if (pdev->id != -1) |
| master->bus_num = pdev->id; |
| |
| master->setup = omap1_spi100k_setup; |
| master->transfer_one_message = omap1_spi100k_transfer_one_message; |
| master->num_chipselect = 2; |
| master->mode_bits = MODEBITS; |
| master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); |
| master->min_speed_hz = OMAP1_SPI100K_MAX_FREQ/(1<<16); |
| master->max_speed_hz = OMAP1_SPI100K_MAX_FREQ; |
| master->auto_runtime_pm = true; |
| |
| spi100k = spi_master_get_devdata(master); |
| |
| /* |
| * The memory region base address is taken as the platform_data. |
| * You should allocate this with ioremap() before initializing |
| * the SPI. |
| */ |
| spi100k->base = (void __iomem *)dev_get_platdata(&pdev->dev); |
| |
| spi100k->ick = devm_clk_get(&pdev->dev, "ick"); |
| if (IS_ERR(spi100k->ick)) { |
| dev_dbg(&pdev->dev, "can't get spi100k_ick\n"); |
| status = PTR_ERR(spi100k->ick); |
| goto err; |
| } |
| |
| spi100k->fck = devm_clk_get(&pdev->dev, "fck"); |
| if (IS_ERR(spi100k->fck)) { |
| dev_dbg(&pdev->dev, "can't get spi100k_fck\n"); |
| status = PTR_ERR(spi100k->fck); |
| goto err; |
| } |
| |
| status = clk_prepare_enable(spi100k->ick); |
| if (status != 0) { |
| dev_err(&pdev->dev, "failed to enable ick: %d\n", status); |
| goto err; |
| } |
| |
| status = clk_prepare_enable(spi100k->fck); |
| if (status != 0) { |
| dev_err(&pdev->dev, "failed to enable fck: %d\n", status); |
| goto err_ick; |
| } |
| |
| pm_runtime_enable(&pdev->dev); |
| pm_runtime_set_active(&pdev->dev); |
| |
| status = devm_spi_register_master(&pdev->dev, master); |
| if (status < 0) |
| goto err_fck; |
| |
| return status; |
| |
| err_fck: |
| clk_disable_unprepare(spi100k->fck); |
| err_ick: |
| clk_disable_unprepare(spi100k->ick); |
| err: |
| spi_master_put(master); |
| return status; |
| } |
| |
| static int omap1_spi100k_remove(struct platform_device *pdev) |
| { |
| struct spi_master *master = platform_get_drvdata(pdev); |
| struct omap1_spi100k *spi100k = spi_master_get_devdata(master); |
| |
| pm_runtime_disable(&pdev->dev); |
| |
| clk_disable_unprepare(spi100k->fck); |
| clk_disable_unprepare(spi100k->ick); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int omap1_spi100k_runtime_suspend(struct device *dev) |
| { |
| struct spi_master *master = dev_get_drvdata(dev); |
| struct omap1_spi100k *spi100k = spi_master_get_devdata(master); |
| |
| clk_disable_unprepare(spi100k->ick); |
| clk_disable_unprepare(spi100k->fck); |
| |
| return 0; |
| } |
| |
| static int omap1_spi100k_runtime_resume(struct device *dev) |
| { |
| struct spi_master *master = dev_get_drvdata(dev); |
| struct omap1_spi100k *spi100k = spi_master_get_devdata(master); |
| int ret; |
| |
| ret = clk_prepare_enable(spi100k->ick); |
| if (ret != 0) { |
| dev_err(dev, "Failed to enable ick: %d\n", ret); |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(spi100k->fck); |
| if (ret != 0) { |
| dev_err(dev, "Failed to enable fck: %d\n", ret); |
| clk_disable_unprepare(spi100k->ick); |
| return ret; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct dev_pm_ops omap1_spi100k_pm = { |
| SET_RUNTIME_PM_OPS(omap1_spi100k_runtime_suspend, |
| omap1_spi100k_runtime_resume, NULL) |
| }; |
| |
| static struct platform_driver omap1_spi100k_driver = { |
| .driver = { |
| .name = "omap1_spi100k", |
| .pm = &omap1_spi100k_pm, |
| }, |
| .probe = omap1_spi100k_probe, |
| .remove = omap1_spi100k_remove, |
| }; |
| |
| module_platform_driver(omap1_spi100k_driver); |
| |
| MODULE_DESCRIPTION("OMAP7xx SPI 100k controller driver"); |
| MODULE_AUTHOR("Fabrice Crohas <fcrohas@gmail.com>"); |
| MODULE_LICENSE("GPL"); |