| /* |
| * Atheros AR9170 driver |
| * |
| * mac80211 interaction code |
| * |
| * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> |
| * Copyright 2009, Christian Lamparter <chunkeey@web.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; see the file COPYING. If not, see |
| * http://www.gnu.org/licenses/. |
| * |
| * This file incorporates work covered by the following copyright and |
| * permission notice: |
| * Copyright (c) 2007-2008 Atheros Communications, Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/etherdevice.h> |
| #include <net/mac80211.h> |
| #include "ar9170.h" |
| #include "hw.h" |
| #include "cmd.h" |
| |
| static int modparam_nohwcrypt; |
| module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); |
| MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); |
| |
| #define RATE(_bitrate, _hw_rate, _txpidx, _flags) { \ |
| .bitrate = (_bitrate), \ |
| .flags = (_flags), \ |
| .hw_value = (_hw_rate) | (_txpidx) << 4, \ |
| } |
| |
| static struct ieee80211_rate __ar9170_ratetable[] = { |
| RATE(10, 0, 0, 0), |
| RATE(20, 1, 1, IEEE80211_RATE_SHORT_PREAMBLE), |
| RATE(55, 2, 2, IEEE80211_RATE_SHORT_PREAMBLE), |
| RATE(110, 3, 3, IEEE80211_RATE_SHORT_PREAMBLE), |
| RATE(60, 0xb, 0, 0), |
| RATE(90, 0xf, 0, 0), |
| RATE(120, 0xa, 0, 0), |
| RATE(180, 0xe, 0, 0), |
| RATE(240, 0x9, 0, 0), |
| RATE(360, 0xd, 1, 0), |
| RATE(480, 0x8, 2, 0), |
| RATE(540, 0xc, 3, 0), |
| }; |
| #undef RATE |
| |
| #define ar9170_g_ratetable (__ar9170_ratetable + 0) |
| #define ar9170_g_ratetable_size 12 |
| #define ar9170_a_ratetable (__ar9170_ratetable + 4) |
| #define ar9170_a_ratetable_size 8 |
| |
| /* |
| * NB: The hw_value is used as an index into the ar9170_phy_freq_params |
| * array in phy.c so that we don't have to do frequency lookups! |
| */ |
| #define CHAN(_freq, _idx) { \ |
| .center_freq = (_freq), \ |
| .hw_value = (_idx), \ |
| .max_power = 18, /* XXX */ \ |
| } |
| |
| static struct ieee80211_channel ar9170_2ghz_chantable[] = { |
| CHAN(2412, 0), |
| CHAN(2417, 1), |
| CHAN(2422, 2), |
| CHAN(2427, 3), |
| CHAN(2432, 4), |
| CHAN(2437, 5), |
| CHAN(2442, 6), |
| CHAN(2447, 7), |
| CHAN(2452, 8), |
| CHAN(2457, 9), |
| CHAN(2462, 10), |
| CHAN(2467, 11), |
| CHAN(2472, 12), |
| CHAN(2484, 13), |
| }; |
| |
| static struct ieee80211_channel ar9170_5ghz_chantable[] = { |
| CHAN(4920, 14), |
| CHAN(4940, 15), |
| CHAN(4960, 16), |
| CHAN(4980, 17), |
| CHAN(5040, 18), |
| CHAN(5060, 19), |
| CHAN(5080, 20), |
| CHAN(5180, 21), |
| CHAN(5200, 22), |
| CHAN(5220, 23), |
| CHAN(5240, 24), |
| CHAN(5260, 25), |
| CHAN(5280, 26), |
| CHAN(5300, 27), |
| CHAN(5320, 28), |
| CHAN(5500, 29), |
| CHAN(5520, 30), |
| CHAN(5540, 31), |
| CHAN(5560, 32), |
| CHAN(5580, 33), |
| CHAN(5600, 34), |
| CHAN(5620, 35), |
| CHAN(5640, 36), |
| CHAN(5660, 37), |
| CHAN(5680, 38), |
| CHAN(5700, 39), |
| CHAN(5745, 40), |
| CHAN(5765, 41), |
| CHAN(5785, 42), |
| CHAN(5805, 43), |
| CHAN(5825, 44), |
| CHAN(5170, 45), |
| CHAN(5190, 46), |
| CHAN(5210, 47), |
| CHAN(5230, 48), |
| }; |
| #undef CHAN |
| |
| #define AR9170_HT_CAP \ |
| { \ |
| .ht_supported = true, \ |
| .cap = IEEE80211_HT_CAP_MAX_AMSDU | \ |
| IEEE80211_HT_CAP_SUP_WIDTH_20_40 | \ |
| IEEE80211_HT_CAP_SGI_40 | \ |
| IEEE80211_HT_CAP_GRN_FLD | \ |
| IEEE80211_HT_CAP_DSSSCCK40 | \ |
| IEEE80211_HT_CAP_SM_PS, \ |
| .ampdu_factor = 3, \ |
| .ampdu_density = 6, \ |
| .mcs = { \ |
| .rx_mask = { 0xff, 0xff, 0, 0, 0x1, 0, 0, 0, 0, 0, }, \ |
| .rx_highest = cpu_to_le16(300), \ |
| .tx_params = IEEE80211_HT_MCS_TX_DEFINED, \ |
| }, \ |
| } |
| |
| static struct ieee80211_supported_band ar9170_band_2GHz = { |
| .channels = ar9170_2ghz_chantable, |
| .n_channels = ARRAY_SIZE(ar9170_2ghz_chantable), |
| .bitrates = ar9170_g_ratetable, |
| .n_bitrates = ar9170_g_ratetable_size, |
| .ht_cap = AR9170_HT_CAP, |
| }; |
| |
| static struct ieee80211_supported_band ar9170_band_5GHz = { |
| .channels = ar9170_5ghz_chantable, |
| .n_channels = ARRAY_SIZE(ar9170_5ghz_chantable), |
| .bitrates = ar9170_a_ratetable, |
| .n_bitrates = ar9170_a_ratetable_size, |
| .ht_cap = AR9170_HT_CAP, |
| }; |
| |
| static void ar9170_tx(struct ar9170 *ar); |
| |
| static inline u16 ar9170_get_seq_h(struct ieee80211_hdr *hdr) |
| { |
| return le16_to_cpu(hdr->seq_ctrl) >> 4; |
| } |
| |
| static inline u16 ar9170_get_seq(struct sk_buff *skb) |
| { |
| struct ar9170_tx_control *txc = (void *) skb->data; |
| return ar9170_get_seq_h((void *) txc->frame_data); |
| } |
| |
| #ifdef AR9170_QUEUE_DEBUG |
| static void ar9170_print_txheader(struct ar9170 *ar, struct sk_buff *skb) |
| { |
| struct ar9170_tx_control *txc = (void *) skb->data; |
| struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb); |
| struct ar9170_tx_info *arinfo = (void *) txinfo->rate_driver_data; |
| struct ieee80211_hdr *hdr = (void *) txc->frame_data; |
| |
| wiphy_debug(ar->hw->wiphy, |
| "=> FRAME [skb:%p, q:%d, DA:[%pM] s:%d " |
| "mac_ctrl:%04x, phy_ctrl:%08x, timeout:[%d ms]]\n", |
| skb, skb_get_queue_mapping(skb), |
| ieee80211_get_DA(hdr), ar9170_get_seq_h(hdr), |
| le16_to_cpu(txc->mac_control), le32_to_cpu(txc->phy_control), |
| jiffies_to_msecs(arinfo->timeout - jiffies)); |
| } |
| |
| static void __ar9170_dump_txqueue(struct ar9170 *ar, |
| struct sk_buff_head *queue) |
| { |
| struct sk_buff *skb; |
| int i = 0; |
| |
| printk(KERN_DEBUG "---[ cut here ]---\n"); |
| wiphy_debug(ar->hw->wiphy, "%d entries in queue.\n", |
| skb_queue_len(queue)); |
| |
| skb_queue_walk(queue, skb) { |
| printk(KERN_DEBUG "index:%d =>\n", i++); |
| ar9170_print_txheader(ar, skb); |
| } |
| if (i != skb_queue_len(queue)) |
| printk(KERN_DEBUG "WARNING: queue frame counter " |
| "mismatch %d != %d\n", skb_queue_len(queue), i); |
| printk(KERN_DEBUG "---[ end ]---\n"); |
| } |
| #endif /* AR9170_QUEUE_DEBUG */ |
| |
| #ifdef AR9170_QUEUE_DEBUG |
| static void ar9170_dump_txqueue(struct ar9170 *ar, |
| struct sk_buff_head *queue) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&queue->lock, flags); |
| __ar9170_dump_txqueue(ar, queue); |
| spin_unlock_irqrestore(&queue->lock, flags); |
| } |
| #endif /* AR9170_QUEUE_DEBUG */ |
| |
| #ifdef AR9170_QUEUE_STOP_DEBUG |
| static void __ar9170_dump_txstats(struct ar9170 *ar) |
| { |
| int i; |
| |
| wiphy_debug(ar->hw->wiphy, "qos queue stats\n"); |
| |
| for (i = 0; i < __AR9170_NUM_TXQ; i++) |
| wiphy_debug(ar->hw->wiphy, |
| "queue:%d limit:%d len:%d waitack:%d stopped:%d\n", |
| i, ar->tx_stats[i].limit, ar->tx_stats[i].len, |
| skb_queue_len(&ar->tx_status[i]), |
| ieee80211_queue_stopped(ar->hw, i)); |
| } |
| #endif /* AR9170_QUEUE_STOP_DEBUG */ |
| |
| /* caller must guarantee exclusive access for _bin_ queue. */ |
| static void ar9170_recycle_expired(struct ar9170 *ar, |
| struct sk_buff_head *queue, |
| struct sk_buff_head *bin) |
| { |
| struct sk_buff *skb, *old = NULL; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&queue->lock, flags); |
| while ((skb = skb_peek(queue))) { |
| struct ieee80211_tx_info *txinfo; |
| struct ar9170_tx_info *arinfo; |
| |
| txinfo = IEEE80211_SKB_CB(skb); |
| arinfo = (void *) txinfo->rate_driver_data; |
| |
| if (time_is_before_jiffies(arinfo->timeout)) { |
| #ifdef AR9170_QUEUE_DEBUG |
| wiphy_debug(ar->hw->wiphy, |
| "[%ld > %ld] frame expired => recycle\n", |
| jiffies, arinfo->timeout); |
| ar9170_print_txheader(ar, skb); |
| #endif /* AR9170_QUEUE_DEBUG */ |
| __skb_unlink(skb, queue); |
| __skb_queue_tail(bin, skb); |
| } else { |
| break; |
| } |
| |
| if (unlikely(old == skb)) { |
| /* bail out - queue is shot. */ |
| |
| WARN_ON(1); |
| break; |
| } |
| old = skb; |
| } |
| spin_unlock_irqrestore(&queue->lock, flags); |
| } |
| |
| static void ar9170_tx_status(struct ar9170 *ar, struct sk_buff *skb, |
| u16 tx_status) |
| { |
| struct ieee80211_tx_info *txinfo; |
| unsigned int retries = 0; |
| |
| txinfo = IEEE80211_SKB_CB(skb); |
| ieee80211_tx_info_clear_status(txinfo); |
| |
| switch (tx_status) { |
| case AR9170_TX_STATUS_RETRY: |
| retries = 2; |
| case AR9170_TX_STATUS_COMPLETE: |
| txinfo->flags |= IEEE80211_TX_STAT_ACK; |
| break; |
| |
| case AR9170_TX_STATUS_FAILED: |
| retries = ar->hw->conf.long_frame_max_tx_count; |
| break; |
| |
| default: |
| wiphy_err(ar->hw->wiphy, |
| "invalid tx_status response (%x)\n", tx_status); |
| break; |
| } |
| |
| txinfo->status.rates[0].count = retries + 1; |
| skb_pull(skb, sizeof(struct ar9170_tx_control)); |
| ieee80211_tx_status_irqsafe(ar->hw, skb); |
| } |
| |
| void ar9170_tx_callback(struct ar9170 *ar, struct sk_buff *skb) |
| { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ar9170_tx_info *arinfo = (void *) info->rate_driver_data; |
| unsigned int queue = skb_get_queue_mapping(skb); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ar->tx_stats_lock, flags); |
| ar->tx_stats[queue].len--; |
| |
| if (ar->tx_stats[queue].len < AR9170_NUM_TX_LIMIT_SOFT) { |
| #ifdef AR9170_QUEUE_STOP_DEBUG |
| wiphy_debug(ar->hw->wiphy, "wake queue %d\n", queue); |
| __ar9170_dump_txstats(ar); |
| #endif /* AR9170_QUEUE_STOP_DEBUG */ |
| ieee80211_wake_queue(ar->hw, queue); |
| } |
| spin_unlock_irqrestore(&ar->tx_stats_lock, flags); |
| |
| if (info->flags & IEEE80211_TX_CTL_NO_ACK) { |
| ar9170_tx_status(ar, skb, AR9170_TX_STATUS_FAILED); |
| } else { |
| arinfo->timeout = jiffies + |
| msecs_to_jiffies(AR9170_TX_TIMEOUT); |
| |
| skb_queue_tail(&ar->tx_status[queue], skb); |
| } |
| |
| if (!ar->tx_stats[queue].len && |
| !skb_queue_empty(&ar->tx_pending[queue])) { |
| ar9170_tx(ar); |
| } |
| } |
| |
| static struct sk_buff *ar9170_get_queued_skb(struct ar9170 *ar, |
| const u8 *mac, |
| struct sk_buff_head *queue, |
| const u32 rate) |
| { |
| unsigned long flags; |
| struct sk_buff *skb; |
| |
| /* |
| * Unfortunately, the firmware does not tell to which (queued) frame |
| * this transmission status report belongs to. |
| * |
| * So we have to make risky guesses - with the scarce information |
| * the firmware provided (-> destination MAC, and phy_control) - |
| * and hope that we picked the right one... |
| */ |
| |
| spin_lock_irqsave(&queue->lock, flags); |
| skb_queue_walk(queue, skb) { |
| struct ar9170_tx_control *txc = (void *) skb->data; |
| struct ieee80211_hdr *hdr = (void *) txc->frame_data; |
| u32 r; |
| |
| if (mac && compare_ether_addr(ieee80211_get_DA(hdr), mac)) { |
| #ifdef AR9170_QUEUE_DEBUG |
| wiphy_debug(ar->hw->wiphy, |
| "skip frame => da %pm != %pm\n", |
| mac, ieee80211_get_DA(hdr)); |
| ar9170_print_txheader(ar, skb); |
| #endif /* AR9170_QUEUE_DEBUG */ |
| continue; |
| } |
| |
| r = (le32_to_cpu(txc->phy_control) & AR9170_TX_PHY_MCS_MASK) >> |
| AR9170_TX_PHY_MCS_SHIFT; |
| |
| if ((rate != AR9170_TX_INVALID_RATE) && (r != rate)) { |
| #ifdef AR9170_QUEUE_DEBUG |
| wiphy_debug(ar->hw->wiphy, |
| "skip frame => rate %d != %d\n", rate, r); |
| ar9170_print_txheader(ar, skb); |
| #endif /* AR9170_QUEUE_DEBUG */ |
| continue; |
| } |
| |
| __skb_unlink(skb, queue); |
| spin_unlock_irqrestore(&queue->lock, flags); |
| return skb; |
| } |
| |
| #ifdef AR9170_QUEUE_DEBUG |
| wiphy_err(ar->hw->wiphy, |
| "ESS:[%pM] does not have any outstanding frames in queue.\n", |
| mac); |
| __ar9170_dump_txqueue(ar, queue); |
| #endif /* AR9170_QUEUE_DEBUG */ |
| spin_unlock_irqrestore(&queue->lock, flags); |
| |
| return NULL; |
| } |
| |
| /* |
| * This worker tries to keeps an maintain tx_status queues. |
| * So we can guarantee that incoming tx_status reports are |
| * actually for a pending frame. |
| */ |
| |
| static void ar9170_tx_janitor(struct work_struct *work) |
| { |
| struct ar9170 *ar = container_of(work, struct ar9170, |
| tx_janitor.work); |
| struct sk_buff_head waste; |
| unsigned int i; |
| bool resched = false; |
| |
| if (unlikely(!IS_STARTED(ar))) |
| return ; |
| |
| skb_queue_head_init(&waste); |
| |
| for (i = 0; i < __AR9170_NUM_TXQ; i++) { |
| #ifdef AR9170_QUEUE_DEBUG |
| wiphy_debug(ar->hw->wiphy, "garbage collector scans queue:%d\n", |
| i); |
| ar9170_dump_txqueue(ar, &ar->tx_pending[i]); |
| ar9170_dump_txqueue(ar, &ar->tx_status[i]); |
| #endif /* AR9170_QUEUE_DEBUG */ |
| |
| ar9170_recycle_expired(ar, &ar->tx_status[i], &waste); |
| ar9170_recycle_expired(ar, &ar->tx_pending[i], &waste); |
| skb_queue_purge(&waste); |
| |
| if (!skb_queue_empty(&ar->tx_status[i]) || |
| !skb_queue_empty(&ar->tx_pending[i])) |
| resched = true; |
| } |
| |
| if (!resched) |
| return; |
| |
| ieee80211_queue_delayed_work(ar->hw, |
| &ar->tx_janitor, |
| msecs_to_jiffies(AR9170_JANITOR_DELAY)); |
| } |
| |
| void ar9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len) |
| { |
| struct ar9170_cmd_response *cmd = (void *) buf; |
| |
| if ((cmd->type & 0xc0) != 0xc0) { |
| ar->callback_cmd(ar, len, buf); |
| return; |
| } |
| |
| /* hardware event handlers */ |
| switch (cmd->type) { |
| case 0xc1: { |
| /* |
| * TX status notification: |
| * bytes: 0c c1 XX YY M1 M2 M3 M4 M5 M6 R4 R3 R2 R1 S2 S1 |
| * |
| * XX always 81 |
| * YY always 00 |
| * M1-M6 is the MAC address |
| * R1-R4 is the transmit rate |
| * S1-S2 is the transmit status |
| */ |
| |
| struct sk_buff *skb; |
| u32 phy = le32_to_cpu(cmd->tx_status.rate); |
| u32 q = (phy & AR9170_TX_PHY_QOS_MASK) >> |
| AR9170_TX_PHY_QOS_SHIFT; |
| #ifdef AR9170_QUEUE_DEBUG |
| wiphy_debug(ar->hw->wiphy, |
| "recv tx_status for %pm, p:%08x, q:%d\n", |
| cmd->tx_status.dst, phy, q); |
| #endif /* AR9170_QUEUE_DEBUG */ |
| |
| skb = ar9170_get_queued_skb(ar, cmd->tx_status.dst, |
| &ar->tx_status[q], |
| AR9170_TX_INVALID_RATE); |
| if (unlikely(!skb)) |
| return ; |
| |
| ar9170_tx_status(ar, skb, le16_to_cpu(cmd->tx_status.status)); |
| break; |
| } |
| |
| case 0xc0: |
| /* |
| * pre-TBTT event |
| */ |
| if (ar->vif && ar->vif->type == NL80211_IFTYPE_AP) |
| ieee80211_queue_work(ar->hw, &ar->beacon_work); |
| break; |
| |
| case 0xc2: |
| /* |
| * (IBSS) beacon send notification |
| * bytes: 04 c2 XX YY B4 B3 B2 B1 |
| * |
| * XX always 80 |
| * YY always 00 |
| * B1-B4 "should" be the number of send out beacons. |
| */ |
| break; |
| |
| case 0xc3: |
| /* End of Atim Window */ |
| break; |
| |
| case 0xc4: |
| /* BlockACK bitmap */ |
| break; |
| |
| case 0xc5: |
| /* BlockACK events */ |
| break; |
| |
| case 0xc6: |
| /* Watchdog Interrupt */ |
| break; |
| |
| case 0xc9: |
| /* retransmission issue / SIFS/EIFS collision ?! */ |
| break; |
| |
| /* firmware debug */ |
| case 0xca: |
| printk(KERN_DEBUG "ar9170 FW: %.*s\n", len - 4, |
| (char *)buf + 4); |
| break; |
| case 0xcb: |
| len -= 4; |
| |
| switch (len) { |
| case 1: |
| printk(KERN_DEBUG "ar9170 FW: u8: %#.2x\n", |
| *((char *)buf + 4)); |
| break; |
| case 2: |
| printk(KERN_DEBUG "ar9170 FW: u8: %#.4x\n", |
| le16_to_cpup((__le16 *)((char *)buf + 4))); |
| break; |
| case 4: |
| printk(KERN_DEBUG "ar9170 FW: u8: %#.8x\n", |
| le32_to_cpup((__le32 *)((char *)buf + 4))); |
| break; |
| case 8: |
| printk(KERN_DEBUG "ar9170 FW: u8: %#.16lx\n", |
| (unsigned long)le64_to_cpup( |
| (__le64 *)((char *)buf + 4))); |
| break; |
| } |
| break; |
| case 0xcc: |
| print_hex_dump_bytes("ar9170 FW:", DUMP_PREFIX_NONE, |
| (char *)buf + 4, len - 4); |
| break; |
| |
| default: |
| pr_info("received unhandled event %x\n", cmd->type); |
| print_hex_dump_bytes("dump:", DUMP_PREFIX_NONE, buf, len); |
| break; |
| } |
| } |
| |
| static void ar9170_rx_reset_rx_mpdu(struct ar9170 *ar) |
| { |
| memset(&ar->rx_mpdu.plcp, 0, sizeof(struct ar9170_rx_head)); |
| ar->rx_mpdu.has_plcp = false; |
| } |
| |
| int ar9170_nag_limiter(struct ar9170 *ar) |
| { |
| bool print_message; |
| |
| /* |
| * we expect all sorts of errors in promiscuous mode. |
| * don't bother with it, it's OK! |
| */ |
| if (ar->sniffer_enabled) |
| return false; |
| |
| /* |
| * only go for frequent errors! The hardware tends to |
| * do some stupid thing once in a while under load, in |
| * noisy environments or just for fun! |
| */ |
| if (time_before(jiffies, ar->bad_hw_nagger) && net_ratelimit()) |
| print_message = true; |
| else |
| print_message = false; |
| |
| /* reset threshold for "once in a while" */ |
| ar->bad_hw_nagger = jiffies + HZ / 4; |
| return print_message; |
| } |
| |
| static int ar9170_rx_mac_status(struct ar9170 *ar, |
| struct ar9170_rx_head *head, |
| struct ar9170_rx_macstatus *mac, |
| struct ieee80211_rx_status *status) |
| { |
| u8 error, decrypt; |
| |
| BUILD_BUG_ON(sizeof(struct ar9170_rx_head) != 12); |
| BUILD_BUG_ON(sizeof(struct ar9170_rx_macstatus) != 4); |
| |
| error = mac->error; |
| if (error & AR9170_RX_ERROR_MMIC) { |
| status->flag |= RX_FLAG_MMIC_ERROR; |
| error &= ~AR9170_RX_ERROR_MMIC; |
| } |
| |
| if (error & AR9170_RX_ERROR_PLCP) { |
| status->flag |= RX_FLAG_FAILED_PLCP_CRC; |
| error &= ~AR9170_RX_ERROR_PLCP; |
| |
| if (!(ar->filter_state & FIF_PLCPFAIL)) |
| return -EINVAL; |
| } |
| |
| if (error & AR9170_RX_ERROR_FCS) { |
| status->flag |= RX_FLAG_FAILED_FCS_CRC; |
| error &= ~AR9170_RX_ERROR_FCS; |
| |
| if (!(ar->filter_state & FIF_FCSFAIL)) |
| return -EINVAL; |
| } |
| |
| decrypt = ar9170_get_decrypt_type(mac); |
| if (!(decrypt & AR9170_RX_ENC_SOFTWARE) && |
| decrypt != AR9170_ENC_ALG_NONE) |
| status->flag |= RX_FLAG_DECRYPTED; |
| |
| /* ignore wrong RA errors */ |
| error &= ~AR9170_RX_ERROR_WRONG_RA; |
| |
| if (error & AR9170_RX_ERROR_DECRYPT) { |
| error &= ~AR9170_RX_ERROR_DECRYPT; |
| /* |
| * Rx decryption is done in place, |
| * the original data is lost anyway. |
| */ |
| |
| return -EINVAL; |
| } |
| |
| /* drop any other error frames */ |
| if (unlikely(error)) { |
| /* TODO: update netdevice's RX dropped/errors statistics */ |
| |
| if (ar9170_nag_limiter(ar)) |
| wiphy_debug(ar->hw->wiphy, |
| "received frame with suspicious error code (%#x).\n", |
| error); |
| |
| return -EINVAL; |
| } |
| |
| status->band = ar->channel->band; |
| status->freq = ar->channel->center_freq; |
| |
| switch (mac->status & AR9170_RX_STATUS_MODULATION_MASK) { |
| case AR9170_RX_STATUS_MODULATION_CCK: |
| if (mac->status & AR9170_RX_STATUS_SHORT_PREAMBLE) |
| status->flag |= RX_FLAG_SHORTPRE; |
| switch (head->plcp[0]) { |
| case 0x0a: |
| status->rate_idx = 0; |
| break; |
| case 0x14: |
| status->rate_idx = 1; |
| break; |
| case 0x37: |
| status->rate_idx = 2; |
| break; |
| case 0x6e: |
| status->rate_idx = 3; |
| break; |
| default: |
| if (ar9170_nag_limiter(ar)) |
| wiphy_err(ar->hw->wiphy, |
| "invalid plcp cck rate (%x).\n", |
| head->plcp[0]); |
| return -EINVAL; |
| } |
| break; |
| |
| case AR9170_RX_STATUS_MODULATION_DUPOFDM: |
| case AR9170_RX_STATUS_MODULATION_OFDM: |
| switch (head->plcp[0] & 0xf) { |
| case 0xb: |
| status->rate_idx = 0; |
| break; |
| case 0xf: |
| status->rate_idx = 1; |
| break; |
| case 0xa: |
| status->rate_idx = 2; |
| break; |
| case 0xe: |
| status->rate_idx = 3; |
| break; |
| case 0x9: |
| status->rate_idx = 4; |
| break; |
| case 0xd: |
| status->rate_idx = 5; |
| break; |
| case 0x8: |
| status->rate_idx = 6; |
| break; |
| case 0xc: |
| status->rate_idx = 7; |
| break; |
| default: |
| if (ar9170_nag_limiter(ar)) |
| wiphy_err(ar->hw->wiphy, |
| "invalid plcp ofdm rate (%x).\n", |
| head->plcp[0]); |
| return -EINVAL; |
| } |
| if (status->band == IEEE80211_BAND_2GHZ) |
| status->rate_idx += 4; |
| break; |
| |
| case AR9170_RX_STATUS_MODULATION_HT: |
| if (head->plcp[3] & 0x80) |
| status->flag |= RX_FLAG_40MHZ; |
| if (head->plcp[6] & 0x80) |
| status->flag |= RX_FLAG_SHORT_GI; |
| |
| status->rate_idx = clamp(0, 75, head->plcp[6] & 0x7f); |
| status->flag |= RX_FLAG_HT; |
| break; |
| |
| default: |
| if (ar9170_nag_limiter(ar)) |
| wiphy_err(ar->hw->wiphy, "invalid modulation\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void ar9170_rx_phy_status(struct ar9170 *ar, |
| struct ar9170_rx_phystatus *phy, |
| struct ieee80211_rx_status *status) |
| { |
| int i; |
| |
| BUILD_BUG_ON(sizeof(struct ar9170_rx_phystatus) != 20); |
| |
| for (i = 0; i < 3; i++) |
| if (phy->rssi[i] != 0x80) |
| status->antenna |= BIT(i); |
| |
| /* post-process RSSI */ |
| for (i = 0; i < 7; i++) |
| if (phy->rssi[i] & 0x80) |
| phy->rssi[i] = ((phy->rssi[i] & 0x7f) + 1) & 0x7f; |
| |
| /* TODO: we could do something with phy_errors */ |
| status->signal = ar->noise[0] + phy->rssi_combined; |
| } |
| |
| static struct sk_buff *ar9170_rx_copy_data(u8 *buf, int len) |
| { |
| struct sk_buff *skb; |
| int reserved = 0; |
| struct ieee80211_hdr *hdr = (void *) buf; |
| |
| if (ieee80211_is_data_qos(hdr->frame_control)) { |
| u8 *qc = ieee80211_get_qos_ctl(hdr); |
| reserved += NET_IP_ALIGN; |
| |
| if (*qc & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT) |
| reserved += NET_IP_ALIGN; |
| } |
| |
| if (ieee80211_has_a4(hdr->frame_control)) |
| reserved += NET_IP_ALIGN; |
| |
| reserved = 32 + (reserved & NET_IP_ALIGN); |
| |
| skb = dev_alloc_skb(len + reserved); |
| if (likely(skb)) { |
| skb_reserve(skb, reserved); |
| memcpy(skb_put(skb, len), buf, len); |
| } |
| |
| return skb; |
| } |
| |
| /* |
| * If the frame alignment is right (or the kernel has |
| * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), and there |
| * is only a single MPDU in the USB frame, then we could |
| * submit to mac80211 the SKB directly. However, since |
| * there may be multiple packets in one SKB in stream |
| * mode, and we need to observe the proper ordering, |
| * this is non-trivial. |
| */ |
| |
| static void ar9170_handle_mpdu(struct ar9170 *ar, u8 *buf, int len) |
| { |
| struct ar9170_rx_head *head; |
| struct ar9170_rx_macstatus *mac; |
| struct ar9170_rx_phystatus *phy = NULL; |
| struct ieee80211_rx_status status; |
| struct sk_buff *skb; |
| int mpdu_len; |
| |
| if (unlikely(!IS_STARTED(ar) || len < (sizeof(*mac)))) |
| return ; |
| |
| /* Received MPDU */ |
| mpdu_len = len - sizeof(*mac); |
| |
| mac = (void *)(buf + mpdu_len); |
| if (unlikely(mac->error & AR9170_RX_ERROR_FATAL)) { |
| /* this frame is too damaged and can't be used - drop it */ |
| |
| return ; |
| } |
| |
| switch (mac->status & AR9170_RX_STATUS_MPDU_MASK) { |
| case AR9170_RX_STATUS_MPDU_FIRST: |
| /* first mpdu packet has the plcp header */ |
| if (likely(mpdu_len >= sizeof(struct ar9170_rx_head))) { |
| head = (void *) buf; |
| memcpy(&ar->rx_mpdu.plcp, (void *) buf, |
| sizeof(struct ar9170_rx_head)); |
| |
| mpdu_len -= sizeof(struct ar9170_rx_head); |
| buf += sizeof(struct ar9170_rx_head); |
| ar->rx_mpdu.has_plcp = true; |
| } else { |
| if (ar9170_nag_limiter(ar)) |
| wiphy_err(ar->hw->wiphy, |
| "plcp info is clipped.\n"); |
| return ; |
| } |
| break; |
| |
| case AR9170_RX_STATUS_MPDU_LAST: |
| /* last mpdu has a extra tail with phy status information */ |
| |
| if (likely(mpdu_len >= sizeof(struct ar9170_rx_phystatus))) { |
| mpdu_len -= sizeof(struct ar9170_rx_phystatus); |
| phy = (void *)(buf + mpdu_len); |
| } else { |
| if (ar9170_nag_limiter(ar)) |
| wiphy_err(ar->hw->wiphy, |
| "frame tail is clipped.\n"); |
| return ; |
| } |
| |
| case AR9170_RX_STATUS_MPDU_MIDDLE: |
| /* middle mpdus are just data */ |
| if (unlikely(!ar->rx_mpdu.has_plcp)) { |
| if (!ar9170_nag_limiter(ar)) |
| return ; |
| |
| wiphy_err(ar->hw->wiphy, |
| "rx stream did not start with a first_mpdu frame tag.\n"); |
| |
| return ; |
| } |
| |
| head = &ar->rx_mpdu.plcp; |
| break; |
| |
| case AR9170_RX_STATUS_MPDU_SINGLE: |
| /* single mpdu - has plcp (head) and phy status (tail) */ |
| head = (void *) buf; |
| |
| mpdu_len -= sizeof(struct ar9170_rx_head); |
| mpdu_len -= sizeof(struct ar9170_rx_phystatus); |
| |
| buf += sizeof(struct ar9170_rx_head); |
| phy = (void *)(buf + mpdu_len); |
| break; |
| |
| default: |
| BUG_ON(1); |
| break; |
| } |
| |
| if (unlikely(mpdu_len < FCS_LEN)) |
| return ; |
| |
| memset(&status, 0, sizeof(status)); |
| if (unlikely(ar9170_rx_mac_status(ar, head, mac, &status))) |
| return ; |
| |
| if (phy) |
| ar9170_rx_phy_status(ar, phy, &status); |
| |
| skb = ar9170_rx_copy_data(buf, mpdu_len); |
| if (likely(skb)) { |
| memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status)); |
| ieee80211_rx_irqsafe(ar->hw, skb); |
| } |
| } |
| |
| void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb) |
| { |
| unsigned int i, tlen, resplen, wlen = 0, clen = 0; |
| u8 *tbuf, *respbuf; |
| |
| tbuf = skb->data; |
| tlen = skb->len; |
| |
| while (tlen >= 4) { |
| clen = tbuf[1] << 8 | tbuf[0]; |
| wlen = ALIGN(clen, 4); |
| |
| /* check if this is stream has a valid tag.*/ |
| if (tbuf[2] != 0 || tbuf[3] != 0x4e) { |
| /* |
| * TODO: handle the highly unlikely event that the |
| * corrupted stream has the TAG at the right position. |
| */ |
| |
| /* check if the frame can be repaired. */ |
| if (!ar->rx_failover_missing) { |
| /* this is no "short read". */ |
| if (ar9170_nag_limiter(ar)) { |
| wiphy_err(ar->hw->wiphy, |
| "missing tag!\n"); |
| goto err_telluser; |
| } else |
| goto err_silent; |
| } |
| |
| if (ar->rx_failover_missing > tlen) { |
| if (ar9170_nag_limiter(ar)) { |
| wiphy_err(ar->hw->wiphy, |
| "possible multi stream corruption!\n"); |
| goto err_telluser; |
| } else |
| goto err_silent; |
| } |
| |
| memcpy(skb_put(ar->rx_failover, tlen), tbuf, tlen); |
| ar->rx_failover_missing -= tlen; |
| |
| if (ar->rx_failover_missing <= 0) { |
| /* |
| * nested ar9170_rx call! |
| * termination is guranteed, even when the |
| * combined frame also have a element with |
| * a bad tag. |
| */ |
| |
| ar->rx_failover_missing = 0; |
| ar9170_rx(ar, ar->rx_failover); |
| |
| skb_reset_tail_pointer(ar->rx_failover); |
| skb_trim(ar->rx_failover, 0); |
| } |
| |
| return ; |
| } |
| |
| /* check if stream is clipped */ |
| if (wlen > tlen - 4) { |
| if (ar->rx_failover_missing) { |
| /* TODO: handle double stream corruption. */ |
| if (ar9170_nag_limiter(ar)) { |
| wiphy_err(ar->hw->wiphy, |
| "double rx stream corruption!\n"); |
| goto err_telluser; |
| } else |
| goto err_silent; |
| } |
| |
| /* |
| * save incomplete data set. |
| * the firmware will resend the missing bits when |
| * the rx - descriptor comes round again. |
| */ |
| |
| memcpy(skb_put(ar->rx_failover, tlen), tbuf, tlen); |
| ar->rx_failover_missing = clen - tlen; |
| return ; |
| } |
| resplen = clen; |
| respbuf = tbuf + 4; |
| tbuf += wlen + 4; |
| tlen -= wlen + 4; |
| |
| i = 0; |
| |
| /* weird thing, but this is the same in the original driver */ |
| while (resplen > 2 && i < 12 && |
| respbuf[0] == 0xff && respbuf[1] == 0xff) { |
| i += 2; |
| resplen -= 2; |
| respbuf += 2; |
| } |
| |
| if (resplen < 4) |
| continue; |
| |
| /* found the 6 * 0xffff marker? */ |
| if (i == 12) |
| ar9170_handle_command_response(ar, respbuf, resplen); |
| else |
| ar9170_handle_mpdu(ar, respbuf, clen); |
| } |
| |
| if (tlen) { |
| if (net_ratelimit()) |
| wiphy_err(ar->hw->wiphy, |
| "%d bytes of unprocessed data left in rx stream!\n", |
| tlen); |
| |
| goto err_telluser; |
| } |
| |
| return ; |
| |
| err_telluser: |
| wiphy_err(ar->hw->wiphy, |
| "damaged RX stream data [want:%d, data:%d, rx:%d, pending:%d ]\n", |
| clen, wlen, tlen, ar->rx_failover_missing); |
| |
| if (ar->rx_failover_missing) |
| print_hex_dump_bytes("rxbuf:", DUMP_PREFIX_OFFSET, |
| ar->rx_failover->data, |
| ar->rx_failover->len); |
| |
| print_hex_dump_bytes("stream:", DUMP_PREFIX_OFFSET, |
| skb->data, skb->len); |
| |
| wiphy_err(ar->hw->wiphy, |
| "If you see this message frequently, please check your hardware and cables.\n"); |
| |
| err_silent: |
| if (ar->rx_failover_missing) { |
| skb_reset_tail_pointer(ar->rx_failover); |
| skb_trim(ar->rx_failover, 0); |
| ar->rx_failover_missing = 0; |
| } |
| } |
| |
| #define AR9170_FILL_QUEUE(queue, ai_fs, cwmin, cwmax, _txop) \ |
| do { \ |
| queue.aifs = ai_fs; \ |
| queue.cw_min = cwmin; \ |
| queue.cw_max = cwmax; \ |
| queue.txop = _txop; \ |
| } while (0) |
| |
| static int ar9170_op_start(struct ieee80211_hw *hw) |
| { |
| struct ar9170 *ar = hw->priv; |
| int err, i; |
| |
| mutex_lock(&ar->mutex); |
| |
| /* reinitialize queues statistics */ |
| memset(&ar->tx_stats, 0, sizeof(ar->tx_stats)); |
| for (i = 0; i < __AR9170_NUM_TXQ; i++) |
| ar->tx_stats[i].limit = AR9170_TXQ_DEPTH; |
| |
| /* reset QoS defaults */ |
| AR9170_FILL_QUEUE(ar->edcf[0], 3, 15, 1023, 0); /* BEST EFFORT*/ |
| AR9170_FILL_QUEUE(ar->edcf[1], 7, 15, 1023, 0); /* BACKGROUND */ |
| AR9170_FILL_QUEUE(ar->edcf[2], 2, 7, 15, 94); /* VIDEO */ |
| AR9170_FILL_QUEUE(ar->edcf[3], 2, 3, 7, 47); /* VOICE */ |
| AR9170_FILL_QUEUE(ar->edcf[4], 2, 3, 7, 0); /* SPECIAL */ |
| |
| /* set sane AMPDU defaults */ |
| ar->global_ampdu_density = 6; |
| ar->global_ampdu_factor = 3; |
| |
| ar->bad_hw_nagger = jiffies; |
| |
| err = ar->open(ar); |
| if (err) |
| goto out; |
| |
| err = ar9170_init_mac(ar); |
| if (err) |
| goto out; |
| |
| err = ar9170_set_qos(ar); |
| if (err) |
| goto out; |
| |
| err = ar9170_init_phy(ar, IEEE80211_BAND_2GHZ); |
| if (err) |
| goto out; |
| |
| err = ar9170_init_rf(ar); |
| if (err) |
| goto out; |
| |
| /* start DMA */ |
| err = ar9170_write_reg(ar, 0x1c3d30, 0x100); |
| if (err) |
| goto out; |
| |
| ar->state = AR9170_STARTED; |
| |
| out: |
| mutex_unlock(&ar->mutex); |
| return err; |
| } |
| |
| static void ar9170_op_stop(struct ieee80211_hw *hw) |
| { |
| struct ar9170 *ar = hw->priv; |
| unsigned int i; |
| |
| if (IS_STARTED(ar)) |
| ar->state = AR9170_IDLE; |
| |
| cancel_delayed_work_sync(&ar->tx_janitor); |
| #ifdef CONFIG_AR9170_LEDS |
| cancel_delayed_work_sync(&ar->led_work); |
| #endif |
| cancel_work_sync(&ar->beacon_work); |
| |
| mutex_lock(&ar->mutex); |
| |
| if (IS_ACCEPTING_CMD(ar)) { |
| ar9170_set_leds_state(ar, 0); |
| |
| /* stop DMA */ |
| ar9170_write_reg(ar, 0x1c3d30, 0); |
| ar->stop(ar); |
| } |
| |
| for (i = 0; i < __AR9170_NUM_TXQ; i++) { |
| skb_queue_purge(&ar->tx_pending[i]); |
| skb_queue_purge(&ar->tx_status[i]); |
| } |
| |
| mutex_unlock(&ar->mutex); |
| } |
| |
| static int ar9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb) |
| { |
| struct ieee80211_hdr *hdr; |
| struct ar9170_tx_control *txc; |
| struct ieee80211_tx_info *info; |
| struct ieee80211_tx_rate *txrate; |
| struct ar9170_tx_info *arinfo; |
| unsigned int queue = skb_get_queue_mapping(skb); |
| u16 keytype = 0; |
| u16 len, icv = 0; |
| |
| BUILD_BUG_ON(sizeof(*arinfo) > sizeof(info->rate_driver_data)); |
| |
| hdr = (void *)skb->data; |
| info = IEEE80211_SKB_CB(skb); |
| len = skb->len; |
| |
| txc = (void *)skb_push(skb, sizeof(*txc)); |
| |
| if (info->control.hw_key) { |
| icv = info->control.hw_key->icv_len; |
| |
| switch (info->control.hw_key->alg) { |
| case ALG_WEP: |
| keytype = AR9170_TX_MAC_ENCR_RC4; |
| break; |
| case ALG_TKIP: |
| keytype = AR9170_TX_MAC_ENCR_RC4; |
| break; |
| case ALG_CCMP: |
| keytype = AR9170_TX_MAC_ENCR_AES; |
| break; |
| default: |
| WARN_ON(1); |
| goto err_out; |
| } |
| } |
| |
| /* Length */ |
| txc->length = cpu_to_le16(len + icv + 4); |
| |
| txc->mac_control = cpu_to_le16(AR9170_TX_MAC_HW_DURATION | |
| AR9170_TX_MAC_BACKOFF); |
| txc->mac_control |= cpu_to_le16(ar9170_qos_hwmap[queue] << |
| AR9170_TX_MAC_QOS_SHIFT); |
| txc->mac_control |= cpu_to_le16(keytype); |
| txc->phy_control = cpu_to_le32(0); |
| |
| if (info->flags & IEEE80211_TX_CTL_NO_ACK) |
| txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_NO_ACK); |
| |
| txrate = &info->control.rates[0]; |
| if (txrate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT) |
| txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_PROT_CTS); |
| else if (txrate->flags & IEEE80211_TX_RC_USE_RTS_CTS) |
| txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_PROT_RTS); |
| |
| arinfo = (void *)info->rate_driver_data; |
| arinfo->timeout = jiffies + msecs_to_jiffies(AR9170_QUEUE_TIMEOUT); |
| |
| if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && |
| (is_valid_ether_addr(ieee80211_get_DA(hdr)))) { |
| /* |
| * WARNING: |
| * Putting the QoS queue bits into an unexplored territory is |
| * certainly not elegant. |
| * |
| * In my defense: This idea provides a reasonable way to |
| * smuggle valuable information to the tx_status callback. |
| * Also, the idea behind this bit-abuse came straight from |
| * the original driver code. |
| */ |
| |
| txc->phy_control |= |
| cpu_to_le32(queue << AR9170_TX_PHY_QOS_SHIFT); |
| |
| txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_RATE_PROBE); |
| } |
| |
| return 0; |
| |
| err_out: |
| skb_pull(skb, sizeof(*txc)); |
| return -EINVAL; |
| } |
| |
| static void ar9170_tx_prepare_phy(struct ar9170 *ar, struct sk_buff *skb) |
| { |
| struct ar9170_tx_control *txc; |
| struct ieee80211_tx_info *info; |
| struct ieee80211_rate *rate = NULL; |
| struct ieee80211_tx_rate *txrate; |
| u32 power, chains; |
| |
| txc = (void *) skb->data; |
| info = IEEE80211_SKB_CB(skb); |
| txrate = &info->control.rates[0]; |
| |
| if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD) |
| txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_GREENFIELD); |
| |
| if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) |
| txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_SHORT_PREAMBLE); |
| |
| if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) |
| txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_BW_40MHZ); |
| /* this works because 40 MHz is 2 and dup is 3 */ |
| if (txrate->flags & IEEE80211_TX_RC_DUP_DATA) |
| txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_BW_40MHZ_DUP); |
| |
| if (txrate->flags & IEEE80211_TX_RC_SHORT_GI) |
| txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_SHORT_GI); |
| |
| if (txrate->flags & IEEE80211_TX_RC_MCS) { |
| u32 r = txrate->idx; |
| u8 *txpower; |
| |
| /* heavy clip control */ |
| txc->phy_control |= cpu_to_le32((r & 0x7) << 7); |
| |
| r <<= AR9170_TX_PHY_MCS_SHIFT; |
| BUG_ON(r & ~AR9170_TX_PHY_MCS_MASK); |
| |
| txc->phy_control |= cpu_to_le32(r & AR9170_TX_PHY_MCS_MASK); |
| txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_MOD_HT); |
| |
| if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) { |
| if (info->band == IEEE80211_BAND_5GHZ) |
| txpower = ar->power_5G_ht40; |
| else |
| txpower = ar->power_2G_ht40; |
| } else { |
| if (info->band == IEEE80211_BAND_5GHZ) |
| txpower = ar->power_5G_ht20; |
| else |
| txpower = ar->power_2G_ht20; |
| } |
| |
| power = txpower[(txrate->idx) & 7]; |
| } else { |
| u8 *txpower; |
| u32 mod; |
| u32 phyrate; |
| u8 idx = txrate->idx; |
| |
| if (info->band != IEEE80211_BAND_2GHZ) { |
| idx += 4; |
| txpower = ar->power_5G_leg; |
| mod = AR9170_TX_PHY_MOD_OFDM; |
| } else { |
| if (idx < 4) { |
| txpower = ar->power_2G_cck; |
| mod = AR9170_TX_PHY_MOD_CCK; |
| } else { |
| mod = AR9170_TX_PHY_MOD_OFDM; |
| txpower = ar->power_2G_ofdm; |
| } |
| } |
| |
| rate = &__ar9170_ratetable[idx]; |
| |
| phyrate = rate->hw_value & 0xF; |
| power = txpower[(rate->hw_value & 0x30) >> 4]; |
| phyrate <<= AR9170_TX_PHY_MCS_SHIFT; |
| |
| txc->phy_control |= cpu_to_le32(mod); |
| txc->phy_control |= cpu_to_le32(phyrate); |
| } |
| |
| power <<= AR9170_TX_PHY_TX_PWR_SHIFT; |
| power &= AR9170_TX_PHY_TX_PWR_MASK; |
| txc->phy_control |= cpu_to_le32(power); |
| |
| /* set TX chains */ |
| if (ar->eeprom.tx_mask == 1) { |
| chains = AR9170_TX_PHY_TXCHAIN_1; |
| } else { |
| chains = AR9170_TX_PHY_TXCHAIN_2; |
| |
| /* >= 36M legacy OFDM - use only one chain */ |
| if (rate && rate->bitrate >= 360) |
| chains = AR9170_TX_PHY_TXCHAIN_1; |
| } |
| txc->phy_control |= cpu_to_le32(chains << AR9170_TX_PHY_TXCHAIN_SHIFT); |
| } |
| |
| static void ar9170_tx(struct ar9170 *ar) |
| { |
| struct sk_buff *skb; |
| unsigned long flags; |
| struct ieee80211_tx_info *info; |
| struct ar9170_tx_info *arinfo; |
| unsigned int i, frames, frames_failed, remaining_space; |
| int err; |
| bool schedule_garbagecollector = false; |
| |
| BUILD_BUG_ON(sizeof(*arinfo) > sizeof(info->rate_driver_data)); |
| |
| if (unlikely(!IS_STARTED(ar))) |
| return ; |
| |
| remaining_space = AR9170_TX_MAX_PENDING; |
| |
| for (i = 0; i < __AR9170_NUM_TXQ; i++) { |
| spin_lock_irqsave(&ar->tx_stats_lock, flags); |
| frames = min(ar->tx_stats[i].limit - ar->tx_stats[i].len, |
| skb_queue_len(&ar->tx_pending[i])); |
| |
| if (remaining_space < frames) { |
| #ifdef AR9170_QUEUE_DEBUG |
| wiphy_debug(ar->hw->wiphy, |
| "tx quota reached queue:%d, " |
| "remaining slots:%d, needed:%d\n", |
| i, remaining_space, frames); |
| #endif /* AR9170_QUEUE_DEBUG */ |
| frames = remaining_space; |
| } |
| |
| ar->tx_stats[i].len += frames; |
| ar->tx_stats[i].count += frames; |
| if (ar->tx_stats[i].len >= ar->tx_stats[i].limit) { |
| #ifdef AR9170_QUEUE_DEBUG |
| wiphy_debug(ar->hw->wiphy, "queue %d full\n", i); |
| wiphy_debug(ar->hw->wiphy, "stuck frames: ===>\n"); |
| ar9170_dump_txqueue(ar, &ar->tx_pending[i]); |
| ar9170_dump_txqueue(ar, &ar->tx_status[i]); |
| #endif /* AR9170_QUEUE_DEBUG */ |
| |
| #ifdef AR9170_QUEUE_STOP_DEBUG |
| wiphy_debug(ar->hw->wiphy, "stop queue %d\n", i); |
| __ar9170_dump_txstats(ar); |
| #endif /* AR9170_QUEUE_STOP_DEBUG */ |
| ieee80211_stop_queue(ar->hw, i); |
| } |
| |
| spin_unlock_irqrestore(&ar->tx_stats_lock, flags); |
| |
| if (!frames) |
| continue; |
| |
| frames_failed = 0; |
| while (frames) { |
| skb = skb_dequeue(&ar->tx_pending[i]); |
| if (unlikely(!skb)) { |
| frames_failed += frames; |
| frames = 0; |
| break; |
| } |
| |
| info = IEEE80211_SKB_CB(skb); |
| arinfo = (void *) info->rate_driver_data; |
| |
| /* TODO: cancel stuck frames */ |
| arinfo->timeout = jiffies + |
| msecs_to_jiffies(AR9170_TX_TIMEOUT); |
| |
| #ifdef AR9170_QUEUE_DEBUG |
| wiphy_debug(ar->hw->wiphy, "send frame q:%d =>\n", i); |
| ar9170_print_txheader(ar, skb); |
| #endif /* AR9170_QUEUE_DEBUG */ |
| |
| err = ar->tx(ar, skb); |
| if (unlikely(err)) { |
| frames_failed++; |
| dev_kfree_skb_any(skb); |
| } else { |
| remaining_space--; |
| schedule_garbagecollector = true; |
| } |
| |
| frames--; |
| } |
| |
| #ifdef AR9170_QUEUE_DEBUG |
| wiphy_debug(ar->hw->wiphy, |
| "ar9170_tx report for queue %d\n", i); |
| |
| wiphy_debug(ar->hw->wiphy, |
| "unprocessed pending frames left:\n"); |
| ar9170_dump_txqueue(ar, &ar->tx_pending[i]); |
| #endif /* AR9170_QUEUE_DEBUG */ |
| |
| if (unlikely(frames_failed)) { |
| #ifdef AR9170_QUEUE_DEBUG |
| wiphy_debug(ar->hw->wiphy, |
| "frames failed %d =>\n", frames_failed); |
| #endif /* AR9170_QUEUE_DEBUG */ |
| |
| spin_lock_irqsave(&ar->tx_stats_lock, flags); |
| ar->tx_stats[i].len -= frames_failed; |
| ar->tx_stats[i].count -= frames_failed; |
| #ifdef AR9170_QUEUE_STOP_DEBUG |
| wiphy_debug(ar->hw->wiphy, "wake queue %d\n", i); |
| __ar9170_dump_txstats(ar); |
| #endif /* AR9170_QUEUE_STOP_DEBUG */ |
| ieee80211_wake_queue(ar->hw, i); |
| spin_unlock_irqrestore(&ar->tx_stats_lock, flags); |
| } |
| } |
| |
| if (!schedule_garbagecollector) |
| return; |
| |
| ieee80211_queue_delayed_work(ar->hw, |
| &ar->tx_janitor, |
| msecs_to_jiffies(AR9170_JANITOR_DELAY)); |
| } |
| |
| int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) |
| { |
| struct ar9170 *ar = hw->priv; |
| struct ieee80211_tx_info *info; |
| unsigned int queue; |
| |
| if (unlikely(!IS_STARTED(ar))) |
| goto err_free; |
| |
| if (unlikely(ar9170_tx_prepare(ar, skb))) |
| goto err_free; |
| |
| queue = skb_get_queue_mapping(skb); |
| info = IEEE80211_SKB_CB(skb); |
| ar9170_tx_prepare_phy(ar, skb); |
| skb_queue_tail(&ar->tx_pending[queue], skb); |
| |
| ar9170_tx(ar); |
| return NETDEV_TX_OK; |
| |
| err_free: |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| static int ar9170_op_add_interface(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct ar9170 *ar = hw->priv; |
| struct ath_common *common = &ar->common; |
| int err = 0; |
| |
| mutex_lock(&ar->mutex); |
| |
| if (ar->vif) { |
| err = -EBUSY; |
| goto unlock; |
| } |
| |
| ar->vif = vif; |
| memcpy(common->macaddr, vif->addr, ETH_ALEN); |
| |
| if (modparam_nohwcrypt || (ar->vif->type != NL80211_IFTYPE_STATION)) { |
| ar->rx_software_decryption = true; |
| ar->disable_offload = true; |
| } |
| |
| ar->cur_filter = 0; |
| err = ar9170_update_frame_filter(ar, AR9170_MAC_REG_FTF_DEFAULTS); |
| if (err) |
| goto unlock; |
| |
| err = ar9170_set_operating_mode(ar); |
| |
| unlock: |
| mutex_unlock(&ar->mutex); |
| return err; |
| } |
| |
| static void ar9170_op_remove_interface(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct ar9170 *ar = hw->priv; |
| |
| mutex_lock(&ar->mutex); |
| ar->vif = NULL; |
| ar9170_update_frame_filter(ar, 0); |
| ar9170_set_beacon_timers(ar); |
| dev_kfree_skb(ar->beacon); |
| ar->beacon = NULL; |
| ar->sniffer_enabled = false; |
| ar->rx_software_decryption = false; |
| ar9170_set_operating_mode(ar); |
| mutex_unlock(&ar->mutex); |
| } |
| |
| static int ar9170_op_config(struct ieee80211_hw *hw, u32 changed) |
| { |
| struct ar9170 *ar = hw->priv; |
| int err = 0; |
| |
| mutex_lock(&ar->mutex); |
| |
| if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) { |
| /* TODO */ |
| err = 0; |
| } |
| |
| if (changed & IEEE80211_CONF_CHANGE_PS) { |
| /* TODO */ |
| err = 0; |
| } |
| |
| if (changed & IEEE80211_CONF_CHANGE_POWER) { |
| /* TODO */ |
| err = 0; |
| } |
| |
| if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) { |
| /* |
| * is it long_frame_max_tx_count or short_frame_max_tx_count? |
| */ |
| |
| err = ar9170_set_hwretry_limit(ar, |
| ar->hw->conf.long_frame_max_tx_count); |
| if (err) |
| goto out; |
| } |
| |
| if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { |
| |
| /* adjust slot time for 5 GHz */ |
| err = ar9170_set_slot_time(ar); |
| if (err) |
| goto out; |
| |
| err = ar9170_set_dyn_sifs_ack(ar); |
| if (err) |
| goto out; |
| |
| err = ar9170_set_channel(ar, hw->conf.channel, |
| AR9170_RFI_NONE, |
| nl80211_to_ar9170(hw->conf.channel_type)); |
| if (err) |
| goto out; |
| } |
| |
| out: |
| mutex_unlock(&ar->mutex); |
| return err; |
| } |
| |
| static u64 ar9170_op_prepare_multicast(struct ieee80211_hw *hw, |
| struct netdev_hw_addr_list *mc_list) |
| { |
| u64 mchash; |
| struct netdev_hw_addr *ha; |
| |
| /* always get broadcast frames */ |
| mchash = 1ULL << (0xff >> 2); |
| |
| netdev_hw_addr_list_for_each(ha, mc_list) |
| mchash |= 1ULL << (ha->addr[5] >> 2); |
| |
| return mchash; |
| } |
| |
| static void ar9170_op_configure_filter(struct ieee80211_hw *hw, |
| unsigned int changed_flags, |
| unsigned int *new_flags, |
| u64 multicast) |
| { |
| struct ar9170 *ar = hw->priv; |
| |
| if (unlikely(!IS_ACCEPTING_CMD(ar))) |
| return ; |
| |
| mutex_lock(&ar->mutex); |
| |
| /* mask supported flags */ |
| *new_flags &= FIF_ALLMULTI | FIF_CONTROL | FIF_BCN_PRBRESP_PROMISC | |
| FIF_PROMISC_IN_BSS | FIF_FCSFAIL | FIF_PLCPFAIL; |
| ar->filter_state = *new_flags; |
| /* |
| * We can support more by setting the sniffer bit and |
| * then checking the error flags, later. |
| */ |
| |
| if (changed_flags & FIF_ALLMULTI && *new_flags & FIF_ALLMULTI) |
| multicast = ~0ULL; |
| |
| if (multicast != ar->cur_mc_hash) |
| ar9170_update_multicast(ar, multicast); |
| |
| if (changed_flags & FIF_CONTROL) { |
| u32 filter = AR9170_MAC_REG_FTF_PSPOLL | |
| AR9170_MAC_REG_FTF_RTS | |
| AR9170_MAC_REG_FTF_CTS | |
| AR9170_MAC_REG_FTF_ACK | |
| AR9170_MAC_REG_FTF_CFE | |
| AR9170_MAC_REG_FTF_CFE_ACK; |
| |
| if (*new_flags & FIF_CONTROL) |
| filter |= ar->cur_filter; |
| else |
| filter &= (~ar->cur_filter); |
| |
| ar9170_update_frame_filter(ar, filter); |
| } |
| |
| if (changed_flags & FIF_PROMISC_IN_BSS) { |
| ar->sniffer_enabled = ((*new_flags) & FIF_PROMISC_IN_BSS) != 0; |
| ar9170_set_operating_mode(ar); |
| } |
| |
| mutex_unlock(&ar->mutex); |
| } |
| |
| |
| static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_bss_conf *bss_conf, |
| u32 changed) |
| { |
| struct ar9170 *ar = hw->priv; |
| struct ath_common *common = &ar->common; |
| int err = 0; |
| |
| mutex_lock(&ar->mutex); |
| |
| if (changed & BSS_CHANGED_BSSID) { |
| memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN); |
| err = ar9170_set_operating_mode(ar); |
| if (err) |
| goto out; |
| } |
| |
| if (changed & BSS_CHANGED_BEACON_ENABLED) |
| ar->enable_beacon = bss_conf->enable_beacon; |
| |
| if (changed & BSS_CHANGED_BEACON) { |
| err = ar9170_update_beacon(ar); |
| if (err) |
| goto out; |
| } |
| |
| if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON | |
| BSS_CHANGED_BEACON_INT)) { |
| err = ar9170_set_beacon_timers(ar); |
| if (err) |
| goto out; |
| } |
| |
| if (changed & BSS_CHANGED_ASSOC) { |
| #ifndef CONFIG_AR9170_LEDS |
| /* enable assoc LED. */ |
| err = ar9170_set_leds_state(ar, bss_conf->assoc ? 2 : 0); |
| #endif /* CONFIG_AR9170_LEDS */ |
| } |
| |
| if (changed & BSS_CHANGED_HT) { |
| /* TODO */ |
| err = 0; |
| } |
| |
| if (changed & BSS_CHANGED_ERP_SLOT) { |
| err = ar9170_set_slot_time(ar); |
| if (err) |
| goto out; |
| } |
| |
| if (changed & BSS_CHANGED_BASIC_RATES) { |
| err = ar9170_set_basic_rates(ar); |
| if (err) |
| goto out; |
| } |
| |
| out: |
| mutex_unlock(&ar->mutex); |
| } |
| |
| static u64 ar9170_op_get_tsf(struct ieee80211_hw *hw) |
| { |
| struct ar9170 *ar = hw->priv; |
| int err; |
| u64 tsf; |
| #define NR 3 |
| static const u32 addr[NR] = { AR9170_MAC_REG_TSF_H, |
| AR9170_MAC_REG_TSF_L, |
| AR9170_MAC_REG_TSF_H }; |
| u32 val[NR]; |
| int loops = 0; |
| |
| mutex_lock(&ar->mutex); |
| |
| while (loops++ < 10) { |
| err = ar9170_read_mreg(ar, NR, addr, val); |
| if (err || val[0] == val[2]) |
| break; |
| } |
| |
| mutex_unlock(&ar->mutex); |
| |
| if (WARN_ON(err)) |
| return 0; |
| tsf = val[0]; |
| tsf = (tsf << 32) | val[1]; |
| return tsf; |
| #undef NR |
| } |
| |
| static int ar9170_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, |
| struct ieee80211_vif *vif, struct ieee80211_sta *sta, |
| struct ieee80211_key_conf *key) |
| { |
| struct ar9170 *ar = hw->priv; |
| int err = 0, i; |
| u8 ktype; |
| |
| if ((!ar->vif) || (ar->disable_offload)) |
| return -EOPNOTSUPP; |
| |
| switch (key->alg) { |
| case ALG_WEP: |
| if (key->keylen == WLAN_KEY_LEN_WEP40) |
| ktype = AR9170_ENC_ALG_WEP64; |
| else |
| ktype = AR9170_ENC_ALG_WEP128; |
| break; |
| case ALG_TKIP: |
| ktype = AR9170_ENC_ALG_TKIP; |
| break; |
| case ALG_CCMP: |
| ktype = AR9170_ENC_ALG_AESCCMP; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| mutex_lock(&ar->mutex); |
| if (cmd == SET_KEY) { |
| if (unlikely(!IS_STARTED(ar))) { |
| err = -EOPNOTSUPP; |
| goto out; |
| } |
| |
| /* group keys need all-zeroes address */ |
| if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) |
| sta = NULL; |
| |
| if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) { |
| for (i = 0; i < 64; i++) |
| if (!(ar->usedkeys & BIT(i))) |
| break; |
| if (i == 64) { |
| ar->rx_software_decryption = true; |
| ar9170_set_operating_mode(ar); |
| err = -ENOSPC; |
| goto out; |
| } |
| } else { |
| i = 64 + key->keyidx; |
| } |
| |
| key->hw_key_idx = i; |
| |
| err = ar9170_upload_key(ar, i, sta ? sta->addr : NULL, ktype, 0, |
| key->key, min_t(u8, 16, key->keylen)); |
| if (err) |
| goto out; |
| |
| if (key->alg == ALG_TKIP) { |
| err = ar9170_upload_key(ar, i, sta ? sta->addr : NULL, |
| ktype, 1, key->key + 16, 16); |
| if (err) |
| goto out; |
| |
| /* |
| * hardware is not capable generating the MMIC |
| * for fragmented frames! |
| */ |
| key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; |
| } |
| |
| if (i < 64) |
| ar->usedkeys |= BIT(i); |
| |
| key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; |
| } else { |
| if (unlikely(!IS_STARTED(ar))) { |
| /* The device is gone... together with the key ;-) */ |
| err = 0; |
| goto out; |
| } |
| |
| err = ar9170_disable_key(ar, key->hw_key_idx); |
| if (err) |
| goto out; |
| |
| if (key->hw_key_idx < 64) { |
| ar->usedkeys &= ~BIT(key->hw_key_idx); |
| } else { |
| err = ar9170_upload_key(ar, key->hw_key_idx, NULL, |
| AR9170_ENC_ALG_NONE, 0, |
| NULL, 0); |
| if (err) |
| goto out; |
| |
| if (key->alg == ALG_TKIP) { |
| err = ar9170_upload_key(ar, key->hw_key_idx, |
| NULL, |
| AR9170_ENC_ALG_NONE, 1, |
| NULL, 0); |
| if (err) |
| goto out; |
| } |
| |
| } |
| } |
| |
| ar9170_regwrite_begin(ar); |
| ar9170_regwrite(AR9170_MAC_REG_ROLL_CALL_TBL_L, ar->usedkeys); |
| ar9170_regwrite(AR9170_MAC_REG_ROLL_CALL_TBL_H, ar->usedkeys >> 32); |
| ar9170_regwrite_finish(); |
| err = ar9170_regwrite_result(); |
| |
| out: |
| mutex_unlock(&ar->mutex); |
| |
| return err; |
| } |
| |
| static int ar9170_get_stats(struct ieee80211_hw *hw, |
| struct ieee80211_low_level_stats *stats) |
| { |
| struct ar9170 *ar = hw->priv; |
| u32 val; |
| int err; |
| |
| mutex_lock(&ar->mutex); |
| err = ar9170_read_reg(ar, AR9170_MAC_REG_TX_RETRY, &val); |
| ar->stats.dot11ACKFailureCount += val; |
| |
| memcpy(stats, &ar->stats, sizeof(*stats)); |
| mutex_unlock(&ar->mutex); |
| |
| return 0; |
| } |
| |
| static int ar9170_get_survey(struct ieee80211_hw *hw, int idx, |
| struct survey_info *survey) |
| { |
| struct ar9170 *ar = hw->priv; |
| struct ieee80211_conf *conf = &hw->conf; |
| |
| if (idx != 0) |
| return -ENOENT; |
| |
| /* TODO: update noise value, e.g. call ar9170_set_channel */ |
| |
| survey->channel = conf->channel; |
| survey->filled = SURVEY_INFO_NOISE_DBM; |
| survey->noise = ar->noise[0]; |
| |
| return 0; |
| } |
| |
| static int ar9170_conf_tx(struct ieee80211_hw *hw, u16 queue, |
| const struct ieee80211_tx_queue_params *param) |
| { |
| struct ar9170 *ar = hw->priv; |
| int ret; |
| |
| mutex_lock(&ar->mutex); |
| if (queue < __AR9170_NUM_TXQ) { |
| memcpy(&ar->edcf[ar9170_qos_hwmap[queue]], |
| param, sizeof(*param)); |
| |
| ret = ar9170_set_qos(ar); |
| } else { |
| ret = -EINVAL; |
| } |
| |
| mutex_unlock(&ar->mutex); |
| return ret; |
| } |
| |
| static int ar9170_ampdu_action(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| enum ieee80211_ampdu_mlme_action action, |
| struct ieee80211_sta *sta, u16 tid, u16 *ssn) |
| { |
| switch (action) { |
| case IEEE80211_AMPDU_RX_START: |
| case IEEE80211_AMPDU_RX_STOP: |
| /* Handled by firmware */ |
| break; |
| |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static const struct ieee80211_ops ar9170_ops = { |
| .start = ar9170_op_start, |
| .stop = ar9170_op_stop, |
| .tx = ar9170_op_tx, |
| .add_interface = ar9170_op_add_interface, |
| .remove_interface = ar9170_op_remove_interface, |
| .config = ar9170_op_config, |
| .prepare_multicast = ar9170_op_prepare_multicast, |
| .configure_filter = ar9170_op_configure_filter, |
| .conf_tx = ar9170_conf_tx, |
| .bss_info_changed = ar9170_op_bss_info_changed, |
| .get_tsf = ar9170_op_get_tsf, |
| .set_key = ar9170_set_key, |
| .get_stats = ar9170_get_stats, |
| .get_survey = ar9170_get_survey, |
| .ampdu_action = ar9170_ampdu_action, |
| }; |
| |
| void *ar9170_alloc(size_t priv_size) |
| { |
| struct ieee80211_hw *hw; |
| struct ar9170 *ar; |
| struct sk_buff *skb; |
| int i; |
| |
| /* |
| * this buffer is used for rx stream reconstruction. |
| * Under heavy load this device (or the transport layer?) |
| * tends to split the streams into separate rx descriptors. |
| */ |
| |
| skb = __dev_alloc_skb(AR9170_RX_STREAM_MAX_SIZE, GFP_KERNEL); |
| if (!skb) |
| goto err_nomem; |
| |
| hw = ieee80211_alloc_hw(priv_size, &ar9170_ops); |
| if (!hw) |
| goto err_nomem; |
| |
| ar = hw->priv; |
| ar->hw = hw; |
| ar->rx_failover = skb; |
| |
| mutex_init(&ar->mutex); |
| spin_lock_init(&ar->cmdlock); |
| spin_lock_init(&ar->tx_stats_lock); |
| for (i = 0; i < __AR9170_NUM_TXQ; i++) { |
| skb_queue_head_init(&ar->tx_status[i]); |
| skb_queue_head_init(&ar->tx_pending[i]); |
| } |
| ar9170_rx_reset_rx_mpdu(ar); |
| INIT_WORK(&ar->beacon_work, ar9170_new_beacon); |
| INIT_DELAYED_WORK(&ar->tx_janitor, ar9170_tx_janitor); |
| |
| /* all hw supports 2.4 GHz, so set channel to 1 by default */ |
| ar->channel = &ar9170_2ghz_chantable[0]; |
| |
| /* first part of wiphy init */ |
| ar->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | |
| BIT(NL80211_IFTYPE_WDS) | |
| BIT(NL80211_IFTYPE_ADHOC); |
| ar->hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS | |
| IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | |
| IEEE80211_HW_SIGNAL_DBM; |
| |
| ar->hw->queues = __AR9170_NUM_TXQ; |
| ar->hw->extra_tx_headroom = 8; |
| |
| ar->hw->max_rates = 1; |
| ar->hw->max_rate_tries = 3; |
| |
| for (i = 0; i < ARRAY_SIZE(ar->noise); i++) |
| ar->noise[i] = -95; /* ATH_DEFAULT_NOISE_FLOOR */ |
| |
| return ar; |
| |
| err_nomem: |
| kfree_skb(skb); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| static int ar9170_read_eeprom(struct ar9170 *ar) |
| { |
| #define RW 8 /* number of words to read at once */ |
| #define RB (sizeof(u32) * RW) |
| struct ath_regulatory *regulatory = &ar->common.regulatory; |
| u8 *eeprom = (void *)&ar->eeprom; |
| u8 *addr = ar->eeprom.mac_address; |
| __le32 offsets[RW]; |
| unsigned int rx_streams, tx_streams, tx_params = 0; |
| int i, j, err, bands = 0; |
| |
| BUILD_BUG_ON(sizeof(ar->eeprom) & 3); |
| |
| BUILD_BUG_ON(RB > AR9170_MAX_CMD_LEN - 4); |
| #ifndef __CHECKER__ |
| /* don't want to handle trailing remains */ |
| BUILD_BUG_ON(sizeof(ar->eeprom) % RB); |
| #endif |
| |
| for (i = 0; i < sizeof(ar->eeprom)/RB; i++) { |
| for (j = 0; j < RW; j++) |
| offsets[j] = cpu_to_le32(AR9170_EEPROM_START + |
| RB * i + 4 * j); |
| |
| err = ar->exec_cmd(ar, AR9170_CMD_RREG, |
| RB, (u8 *) &offsets, |
| RB, eeprom + RB * i); |
| if (err) |
| return err; |
| } |
| |
| #undef RW |
| #undef RB |
| |
| if (ar->eeprom.length == cpu_to_le16(0xFFFF)) |
| return -ENODATA; |
| |
| if (ar->eeprom.operating_flags & AR9170_OPFLAG_2GHZ) { |
| ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &ar9170_band_2GHz; |
| bands++; |
| } |
| if (ar->eeprom.operating_flags & AR9170_OPFLAG_5GHZ) { |
| ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &ar9170_band_5GHz; |
| bands++; |
| } |
| |
| rx_streams = hweight8(ar->eeprom.rx_mask); |
| tx_streams = hweight8(ar->eeprom.tx_mask); |
| |
| if (rx_streams != tx_streams) |
| tx_params = IEEE80211_HT_MCS_TX_RX_DIFF; |
| |
| if (tx_streams >= 1 && tx_streams <= IEEE80211_HT_MCS_TX_MAX_STREAMS) |
| tx_params = (tx_streams - 1) << |
| IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT; |
| |
| ar9170_band_2GHz.ht_cap.mcs.tx_params |= tx_params; |
| ar9170_band_5GHz.ht_cap.mcs.tx_params |= tx_params; |
| |
| /* |
| * I measured this, a bandswitch takes roughly |
| * 135 ms and a frequency switch about 80. |
| * |
| * FIXME: measure these values again once EEPROM settings |
| * are used, that will influence them! |
| */ |
| if (bands == 2) |
| ar->hw->channel_change_time = 135 * 1000; |
| else |
| ar->hw->channel_change_time = 80 * 1000; |
| |
| regulatory->current_rd = le16_to_cpu(ar->eeprom.reg_domain[0]); |
| regulatory->current_rd_ext = le16_to_cpu(ar->eeprom.reg_domain[1]); |
| |
| /* second part of wiphy init */ |
| SET_IEEE80211_PERM_ADDR(ar->hw, addr); |
| |
| return bands ? 0 : -EINVAL; |
| } |
| |
| static int ar9170_reg_notifier(struct wiphy *wiphy, |
| struct regulatory_request *request) |
| { |
| struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); |
| struct ar9170 *ar = hw->priv; |
| |
| return ath_reg_notifier_apply(wiphy, request, &ar->common.regulatory); |
| } |
| |
| int ar9170_register(struct ar9170 *ar, struct device *pdev) |
| { |
| struct ath_regulatory *regulatory = &ar->common.regulatory; |
| int err; |
| |
| /* try to read EEPROM, init MAC addr */ |
| err = ar9170_read_eeprom(ar); |
| if (err) |
| goto err_out; |
| |
| err = ath_regd_init(regulatory, ar->hw->wiphy, |
| ar9170_reg_notifier); |
| if (err) |
| goto err_out; |
| |
| err = ieee80211_register_hw(ar->hw); |
| if (err) |
| goto err_out; |
| |
| if (!ath_is_world_regd(regulatory)) |
| regulatory_hint(ar->hw->wiphy, regulatory->alpha2); |
| |
| err = ar9170_init_leds(ar); |
| if (err) |
| goto err_unreg; |
| |
| #ifdef CONFIG_AR9170_LEDS |
| err = ar9170_register_leds(ar); |
| if (err) |
| goto err_unreg; |
| #endif /* CONFIG_AR9170_LEDS */ |
| |
| dev_info(pdev, "Atheros AR9170 is registered as '%s'\n", |
| wiphy_name(ar->hw->wiphy)); |
| |
| ar->registered = true; |
| return 0; |
| |
| err_unreg: |
| ieee80211_unregister_hw(ar->hw); |
| |
| err_out: |
| return err; |
| } |
| |
| void ar9170_unregister(struct ar9170 *ar) |
| { |
| if (ar->registered) { |
| #ifdef CONFIG_AR9170_LEDS |
| ar9170_unregister_leds(ar); |
| #endif /* CONFIG_AR9170_LEDS */ |
| |
| ieee80211_unregister_hw(ar->hw); |
| } |
| |
| kfree_skb(ar->rx_failover); |
| mutex_destroy(&ar->mutex); |
| } |