Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (59 commits)
HID: fix up 'EMBEDDED' mess in Kconfig
HID: roccat: cleanup preprocessor macros
HID: roccat: refactor special event handling
HID: roccat: fix special button support
HID: roccat: Correctly mark init and exit functions
HID: hidraw: Use Interrupt Endpoint for OUT Transfers if Available
HID: hid-samsung: remove redundant key mappings
HID: add omitted hid-zydacron.c file
HID: hid-samsung: add support for Creative Desktop Wireless 6000
HID: picolcd: Eliminate use after free
HID: Zydacron Remote Control driver
HID: Use kmemdup
HID: magicmouse: fix input registration
HID: make Prodikeys driver standalone config option
HID: Prodikeys PC-MIDI HID Driver
HID: hidraw: fix indentation
HID: ntrig: add filtering module parameters
HID: ntrig: add sysfs access to filter parameters
HID: ntrig: add sensitivity and responsiveness support
HID: add multi-input quirk for eGalax Touchcontroller
...
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-picolcd b/Documentation/ABI/testing/sysfs-driver-hid-picolcd
new file mode 100644
index 0000000..08579e7
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-picolcd
@@ -0,0 +1,43 @@
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/operation_mode
+Date: March 2010
+Contact: Bruno Prémont <bonbons@linux-vserver.org>
+Description: Make it possible to switch the PicoLCD device between LCD
+ (firmware) and bootloader (flasher) operation modes.
+
+ Reading: returns list of available modes, the active mode being
+ enclosed in brackets ('[' and ']')
+
+ Writing: causes operation mode switch. Permitted values are
+ the non-active mode names listed when read.
+
+ Note: when switching mode the current PicoLCD HID device gets
+ disconnected and reconnects after above delay (see attribute
+ operation_mode_delay for its value).
+
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/operation_mode_delay
+Date: April 2010
+Contact: Bruno Prémont <bonbons@linux-vserver.org>
+Description: Delay PicoLCD waits before restarting in new mode when
+ operation_mode has changed.
+
+ Reading/Writing: It is expressed in ms and permitted range is
+ 0..30000ms.
+
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/fb_update_rate
+Date: March 2010
+Contact: Bruno Prémont <bonbons@linux-vserver.org>
+Description: Make it possible to adjust defio refresh rate.
+
+ Reading: returns list of available refresh rates (expressed in Hz),
+ the active refresh rate being enclosed in brackets ('[' and ']')
+
+ Writing: accepts new refresh rate expressed in integer Hz
+ within permitted rates.
+
+ Note: As device can barely do 2 complete refreshes a second
+ it only makes sense to adjust this value if only one or two
+ tiles get changed and it's not appropriate to expect the application
+ to flush it's tiny changes explicitely at higher than default rate.
+
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-prodikeys b/Documentation/ABI/testing/sysfs-driver-hid-prodikeys
new file mode 100644
index 0000000..05d988c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-prodikeys
@@ -0,0 +1,29 @@
+What: /sys/bus/hid/drivers/prodikeys/.../channel
+Date: April 2010
+KernelVersion: 2.6.34
+Contact: Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+ Allows control (via software) the midi channel to which
+ that the pc-midi keyboard will output.midi data.
+ Range: 0..15
+ Type: Read/write
+What: /sys/bus/hid/drivers/prodikeys/.../sustain
+Date: April 2010
+KernelVersion: 2.6.34
+Contact: Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+ Allows control (via software) the sustain duration of a
+ note held by the pc-midi driver.
+ 0 means sustain mode is disabled.
+ Range: 0..5000 (milliseconds)
+ Type: Read/write
+What: /sys/bus/hid/drivers/prodikeys/.../octave
+Date: April 2010
+KernelVersion: 2.6.34
+Contact: Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+ Controls the octave shift modifier in the pc-midi driver.
+ The octave can be shifted via software up/down 2 octaves.
+ 0 means the no ocatve shift.
+ Range: -2..2 (minus 2 to plus 2)
+ Type: Read/Write
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
new file mode 100644
index 0000000..88340a2
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
@@ -0,0 +1,111 @@
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_dpi
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: It is possible to switch the dpi setting of the mouse with the
+ press of a button.
+ When read, this file returns the raw number of the actual dpi
+ setting reported by the mouse. This number has to be further
+ processed to receive the real dpi value.
+
+ VALUE DPI
+ 1 800
+ 2 1200
+ 3 1600
+ 4 2000
+ 5 2400
+ 6 3200
+
+ This file is readonly.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_profile
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the number of the actual profile.
+ This file is readonly.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/firmware_version
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the raw integer version number of the
+ firmware reported by the mouse. Using the integer value eases
+ further usage in other programs. To receive the real version
+ number the decimal point has to be shifted 2 positions to the
+ left. E.g. a returned value of 138 means 1.38
+ This file is readonly.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/kone_driver_version
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the driver version.
+ The format of the string is "v<major>.<minor>.<patchlevel>".
+ This attribute is used by the userland tools to find the sysfs-
+ paths of installed kone-mice and determine the capabilites of
+ the driver. Versions of this driver for old kernels replace
+ usbhid instead of generic-usb. The way to scan for this file
+ has been chosen to provide a consistent way for all supported
+ kernel versions.
+ This file is readonly.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse can store 5 profiles which can be switched by the
+ press of a button. A profile holds informations like button
+ mappings, sensitivity, the colors of the 5 leds and light
+ effects.
+ When read, these files return the respective profile. The
+ returned data is 975 bytes in size.
+ When written, this file lets one write the respective profile
+ data back to the mouse. The data has to be 975 bytes long.
+ The mouse will reject invalid data, whereas the profile number
+ stored in the profile doesn't need to fit the number of the
+ store.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/settings
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the settings stored in the mouse.
+ The size of the data is 36 bytes and holds information like the
+ startup_profile, tcu state and calibration_data.
+ When written, this file lets write settings back to the mouse.
+ The data has to be 36 bytes long. The mouse will reject invalid
+ data.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/startup_profile
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The integer value of this attribute ranges from 1 to 5.
+ When read, this attribute returns the number of the profile
+ that's active when the mouse is powered on.
+ When written, this file sets the number of the startup profile
+ and the mouse activates this profile immediately.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/tcu
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse has a "Tracking Control Unit" which lets the user
+ calibrate the laser power to fit the mousepad surface.
+ When read, this file returns the current state of the TCU,
+ where 0 means off and 1 means on.
+ Writing 0 in this file will switch the TCU off.
+ Writing 1 in this file will start the calibration which takes
+ around 6 seconds to complete and activates the TCU.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/weight
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse can be equipped with one of four supplied weights
+ ranging from 5 to 20 grams which are recognized by the mouse
+ and its value can be read out. When read, this file returns the
+ raw value returned by the mouse which eases further processing
+ in other software.
+ The values map to the weights as follows:
+
+ VALUE WEIGHT
+ 0 none
+ 1 5g
+ 2 10g
+ 3 15g
+ 4 20g
+
+ This file is readonly.
diff --git a/Documentation/ABI/testing/sysfs-wacom b/Documentation/ABI/testing/sysfs-wacom
new file mode 100644
index 0000000..1517976
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-wacom
@@ -0,0 +1,10 @@
+What: /sys/class/hidraw/hidraw*/device/speed
+Date: April 2010
+Kernel Version: 2.6.35
+Contact: linux-bluetooth@vger.kernel.org
+Description:
+ The /sys/class/hidraw/hidraw*/device/speed file controls
+ reporting speed of wacom bluetooth tablet. Reading from
+ this file returns 1 if tablet reports in high speed mode
+ or 0 otherwise. Writing to this file one of these values
+ switches reporting speed.
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 71d4c07..76ba59b 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -86,6 +86,12 @@
---help---
Support for Belkin Flip KVM and Wireless keyboard.
+config HID_CANDO
+ tristate "Cando dual touch panel"
+ depends on USB_HID
+ ---help---
+ Support for Cando dual touch panel.
+
config HID_CHERRY
tristate "Cherry" if EMBEDDED
depends on USB_HID
@@ -100,6 +106,21 @@
---help---
Support for Chicony Tactical pad.
+config HID_PRODIKEYS
+ tristate "Prodikeys PC-MIDI Keyboard support"
+ depends on USB_HID && SND
+ select SND_RAWMIDI
+ ---help---
+ Support for Prodikeys PC-MIDI Keyboard device support.
+ Say Y here to enable support for this device.
+ - Prodikeys PC-MIDI keyboard.
+ The Prodikeys PC-MIDI acts as a USB Audio device, with one MIDI
+ input and one MIDI output. These MIDI jacks appear as
+ a sound "card" in the ALSA sound system.
+ Note: if you say N here, this device will still function as a basic
+ multimedia keyboard, but will lack support for the musical keyboard
+ and some additional multimedia keys.
+
config HID_CYPRESS
tristate "Cypress" if EMBEDDED
depends on USB_HID
@@ -108,9 +129,8 @@
Support for cypress mouse and barcode readers.
config HID_DRAGONRISE
- tristate "DragonRise Inc. support" if EMBEDDED
+ tristate "DragonRise Inc. support"
depends on USB_HID
- default !EMBEDDED
---help---
Say Y here if you have DragonRise Inc.game controllers.
@@ -122,6 +142,12 @@
Say Y here if you want to enable force feedback support for DragonRise Inc.
game controllers.
+config HID_EGALAX
+ tristate "eGalax multi-touch panel"
+ depends on USB_HID
+ ---help---
+ Support for the eGalax dual-touch panel.
+
config HID_EZKEY
tristate "Ezkey" if EMBEDDED
depends on USB_HID
@@ -137,16 +163,14 @@
Support for Kye/Genius Ergo Mouse.
config HID_GYRATION
- tristate "Gyration" if EMBEDDED
+ tristate "Gyration"
depends on USB_HID
- default !EMBEDDED
---help---
Support for Gyration remote control.
config HID_TWINHAN
- tristate "Twinhan" if EMBEDDED
+ tristate "Twinhan"
depends on USB_HID
- default !EMBEDDED
---help---
Support for Twinhan IR remote control.
@@ -233,16 +257,14 @@
Support for N-Trig touch screen.
config HID_ORTEK
- tristate "Ortek" if EMBEDDED
+ tristate "Ortek"
depends on USB_HID
- default !EMBEDDED
---help---
Support for Ortek WKB-2000 wireless keyboard + mouse trackpad.
config HID_PANTHERLORD
- tristate "Pantherlord support" if EMBEDDED
+ tristate "Pantherlord support"
depends on USB_HID
- default !EMBEDDED
---help---
Say Y here if you have a PantherLord/GreenAsia based game controller
or adapter.
@@ -256,29 +278,90 @@
or adapter and want to enable force feedback support for it.
config HID_PETALYNX
- tristate "Petalynx" if EMBEDDED
+ tristate "Petalynx"
depends on USB_HID
- default !EMBEDDED
---help---
Support for Petalynx Maxter remote control.
+config HID_PICOLCD
+ tristate "PicoLCD (graphic version)"
+ depends on USB_HID
+ ---help---
+ This provides support for Minibox PicoLCD devices, currently
+ only the graphical ones are supported.
+
+ This includes support for the following device features:
+ - Keypad
+ - Switching between Firmware and Flash mode
+ - EEProm / Flash access (via debugfs)
+ Features selectively enabled:
+ - Framebuffer for monochrome 256x64 display
+ - Backlight control
+ - Contrast control
+ - General purpose outputs
+ Features that are not (yet) supported:
+ - IR
+
+config HID_PICOLCD_FB
+ bool "Framebuffer support" if EMBEDDED
+ default !EMBEDDED
+ depends on HID_PICOLCD
+ depends on HID_PICOLCD=FB || FB=y
+ select FB_DEFERRED_IO
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ ---help---
+ Provide access to PicoLCD's 256x64 monochrome display via a
+ frambuffer device.
+
+config HID_PICOLCD_BACKLIGHT
+ bool "Backlight control" if EMBEDDED
+ default !EMBEDDED
+ depends on HID_PICOLCD
+ depends on HID_PICOLCD=BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=y
+ ---help---
+ Provide access to PicoLCD's backlight control via backlight
+ class.
+
+config HID_PICOLCD_LCD
+ bool "Contrast control" if EMBEDDED
+ default !EMBEDDED
+ depends on HID_PICOLCD
+ depends on HID_PICOLCD=LCD_CLASS_DEVICE || LCD_CLASS_DEVICE=y
+ ---help---
+ Provide access to PicoLCD's LCD contrast via lcd class.
+
+config HID_PICOLCD_LEDS
+ bool "GPO via leds class" if EMBEDDED
+ default !EMBEDDED
+ depends on HID_PICOLCD
+ depends on HID_PICOLCD=LEDS_CLASS || LEDS_CLASS=y
+ ---help---
+ Provide access to PicoLCD's GPO pins via leds class.
+
config HID_QUANTA
tristate "Quanta Optical Touch"
depends on USB_HID
---help---
Support for Quanta Optical Touch dual-touch panels.
-config HID_SAMSUNG
- tristate "Samsung" if EMBEDDED
+config HID_ROCCAT_KONE
+ tristate "Roccat Kone Mouse support"
depends on USB_HID
- default !EMBEDDED
---help---
- Support for Samsung InfraRed remote control.
+ Support for Roccat Kone mouse.
+
+config HID_SAMSUNG
+ tristate "Samsung"
+ depends on USB_HID
+ ---help---
+ Support for Samsung InfraRed remote control or keyboards.
config HID_SONY
- tristate "Sony" if EMBEDDED
+ tristate "Sony"
depends on USB_HID
- default !EMBEDDED
---help---
Support for Sony PS3 controller.
@@ -289,16 +372,14 @@
Support for Stantum multitouch panel.
config HID_SUNPLUS
- tristate "Sunplus" if EMBEDDED
+ tristate "Sunplus"
depends on USB_HID
- default !EMBEDDED
---help---
Support for Sunplus wireless desktop.
config HID_GREENASIA
- tristate "GreenAsia (Product ID 0x12) support" if EMBEDDED
+ tristate "GreenAsia (Product ID 0x12) support"
depends on USB_HID
- default !EMBEDDED
---help---
Say Y here if you have a GreenAsia (Product ID 0x12) based game
controller or adapter.
@@ -313,9 +394,8 @@
and want to enable force feedback support for it.
config HID_SMARTJOYPLUS
- tristate "SmartJoy PLUS PS2/USB adapter support" if EMBEDDED
+ tristate "SmartJoy PLUS PS2/USB adapter support"
depends on USB_HID
- default !EMBEDDED
---help---
Support for SmartJoy PLUS PS2/USB adapter.
@@ -328,16 +408,14 @@
enable force feedback support for it.
config HID_TOPSEED
- tristate "TopSeed Cyberlink remote control support" if EMBEDDED
+ tristate "TopSeed Cyberlink remote control support"
depends on USB_HID
- default !EMBEDDED
---help---
- Say Y if you have a TopSeed Cyberlink remote control.
+ Say Y if you have a TopSeed Cyberlink or BTC Emprex remote control.
config HID_THRUSTMASTER
- tristate "ThrustMaster devices support" if EMBEDDED
+ tristate "ThrustMaster devices support"
depends on USB_HID
- default !EMBEDDED
---help---
Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
a THRUSTMASTER Ferrari GT Rumble Wheel.
@@ -357,10 +435,17 @@
---help---
Support for Wacom Graphire Bluetooth tablet.
+config HID_WACOM_POWER_SUPPLY
+ bool "Wacom Bluetooth devices power supply status support"
+ depends on HID_WACOM
+ select POWER_SUPPLY
+ ---help---
+ Say Y here if you want to enable power supply status monitoring for
+ Wacom Bluetooth devices.
+
config HID_ZEROPLUS
- tristate "Zeroplus based game controller support" if EMBEDDED
+ tristate "Zeroplus based game controller support"
depends on USB_HID
- default !EMBEDDED
---help---
Say Y here if you have a Zeroplus based game controller.
@@ -372,6 +457,12 @@
Say Y here if you have a Zeroplus based game controller and want
to have force feedback support for it.
+config HID_ZYDACRON
+ tristate "Zydacron remote control support"
+ depends on USB_HID
+ ---help---
+ Support for Zydacron remote control.
+
endmenu
endif # HID_SUPPORT
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 0b2618f..22e47eae 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -26,10 +26,12 @@
obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o
obj-$(CONFIG_HID_APPLE) += hid-apple.o
obj-$(CONFIG_HID_BELKIN) += hid-belkin.o
+obj-$(CONFIG_HID_CANDO) += hid-cando.o
obj-$(CONFIG_HID_CHERRY) += hid-cherry.o
obj-$(CONFIG_HID_CHICONY) += hid-chicony.o
obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o
obj-$(CONFIG_HID_DRAGONRISE) += hid-drff.o
+obj-$(CONFIG_HID_EGALAX) += hid-egalax.o
obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o
obj-$(CONFIG_HID_GYRATION) += hid-gyration.o
obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o
@@ -41,9 +43,12 @@
obj-$(CONFIG_HID_MOSART) += hid-mosart.o
obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o
obj-$(CONFIG_HID_ORTEK) += hid-ortek.o
+obj-$(CONFIG_HID_PRODIKEYS) += hid-prodikeys.o
obj-$(CONFIG_HID_QUANTA) += hid-quanta.o
obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o
obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o
+obj-$(CONFIG_HID_PICOLCD) += hid-picolcd.o
+obj-$(CONFIG_HID_ROCCAT_KONE) += hid-roccat-kone.o
obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o
obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o
obj-$(CONFIG_HID_SONY) += hid-sony.o
@@ -54,6 +59,7 @@
obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o
obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o
obj-$(CONFIG_HID_ZEROPLUS) += hid-zpff.o
+obj-$(CONFIG_HID_ZYDACRON) += hid-zydacron.o
obj-$(CONFIG_HID_WACOM) += hid-wacom.o
obj-$(CONFIG_USB_HID) += usbhid/
diff --git a/drivers/hid/hid-3m-pct.c b/drivers/hid/hid-3m-pct.c
index c31e0be..2a0d56b 100644
--- a/drivers/hid/hid-3m-pct.c
+++ b/drivers/hid/hid-3m-pct.c
@@ -1,7 +1,7 @@
/*
* HID driver for 3M PCT multitouch panels
*
- * Copyright (c) 2009 Stephane Chatty <chatty@enac.fr>
+ * Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr>
*
*/
@@ -25,7 +25,7 @@
#include "hid-ids.h"
struct mmm_finger {
- __s32 x, y;
+ __s32 x, y, w, h;
__u8 rank;
bool touch, valid;
};
@@ -82,7 +82,18 @@
/* touchscreen emulation */
hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
return 1;
+ case HID_DG_WIDTH:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TOUCH_MAJOR);
+ return 1;
+ case HID_DG_HEIGHT:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TOUCH_MINOR);
+ input_set_abs_params(hi->input, ABS_MT_ORIENTATION,
+ 1, 1, 0, 0);
+ return 1;
case HID_DG_CONTACTID:
+ field->logical_maximum = 59;
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TRACKING_ID);
return 1;
@@ -128,9 +139,15 @@
/* this finger is just placeholder data, ignore */
} else if (f->touch) {
/* this finger is on the screen */
+ int wide = (f->w > f->h);
input_event(input, EV_ABS, ABS_MT_TRACKING_ID, i);
input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x);
input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y);
+ input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
+ input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR,
+ wide ? f->w : f->h);
+ input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR,
+ wide ? f->h : f->w);
input_mt_sync(input);
/*
* touchscreen emulation: maintain the age rank
@@ -197,6 +214,14 @@
case HID_DG_CONFIDENCE:
md->valid = value;
break;
+ case HID_DG_WIDTH:
+ if (md->valid)
+ md->f[md->curid].w = value;
+ break;
+ case HID_DG_HEIGHT:
+ if (md->valid)
+ md->f[md->curid].h = value;
+ break;
case HID_DG_CONTACTID:
if (md->valid) {
md->curid = value;
@@ -255,6 +280,7 @@
static const struct hid_device_id mmm_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M2256) },
{ }
};
MODULE_DEVICE_TABLE(hid, mmm_devices);
@@ -287,5 +313,4 @@
module_init(mmm_init);
module_exit(mmm_exit);
-MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-cando.c b/drivers/hid/hid-cando.c
new file mode 100644
index 0000000..4267a6f
--- /dev/null
+++ b/drivers/hid/hid-cando.c
@@ -0,0 +1,272 @@
+/*
+ * HID driver for Cando dual-touch panels
+ *
+ * Copyright (c) 2010 Stephane Chatty <chatty@enac.fr>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("Cando dual-touch panel");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct cando_data {
+ __u16 x, y;
+ __u8 id;
+ __s8 oldest; /* id of the oldest finger in previous frame */
+ bool valid; /* valid finger data, or just placeholder? */
+ bool first; /* is this the first finger in this frame? */
+ __s8 firstid; /* id of the first finger in the frame */
+ __u16 firstx, firsty; /* (x, y) of the first finger in the frame */
+};
+
+static int cando_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ switch (usage->hid & HID_USAGE_PAGE) {
+
+ case HID_UP_GENDESK:
+ switch (usage->hid) {
+ case HID_GD_X:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_X);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_X,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ case HID_GD_Y:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_Y);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_Y,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ }
+ return 0;
+
+ case HID_UP_DIGITIZER:
+ switch (usage->hid) {
+ case HID_DG_TIPSWITCH:
+ case HID_DG_CONTACTMAX:
+ return -1;
+ case HID_DG_INRANGE:
+ /* touchscreen emulation */
+ hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+ return 1;
+ case HID_DG_CONTACTID:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TRACKING_ID);
+ return 1;
+ }
+ return 0;
+ }
+
+ return 0;
+}
+
+static int cando_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ if (usage->type == EV_KEY || usage->type == EV_ABS)
+ clear_bit(usage->code, *bit);
+
+ return 0;
+}
+
+/*
+ * this function is called when a whole finger has been parsed,
+ * so that it can decide what to send to the input layer.
+ */
+static void cando_filter_event(struct cando_data *td, struct input_dev *input)
+{
+ td->first = !td->first; /* touchscreen emulation */
+
+ if (!td->valid) {
+ /*
+ * touchscreen emulation: if this is the second finger and
+ * the first was valid, the first was the oldest; if the
+ * first was not valid and there was a valid finger in the
+ * previous frame, this is a release.
+ */
+ if (td->first) {
+ td->firstid = -1;
+ } else if (td->firstid >= 0) {
+ input_event(input, EV_ABS, ABS_X, td->firstx);
+ input_event(input, EV_ABS, ABS_Y, td->firsty);
+ td->oldest = td->firstid;
+ } else if (td->oldest >= 0) {
+ input_event(input, EV_KEY, BTN_TOUCH, 0);
+ td->oldest = -1;
+ }
+
+ return;
+ }
+
+ input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
+ input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
+ input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
+
+ input_mt_sync(input);
+
+ /*
+ * touchscreen emulation: if there was no touching finger previously,
+ * emit touch event
+ */
+ if (td->oldest < 0) {
+ input_event(input, EV_KEY, BTN_TOUCH, 1);
+ td->oldest = td->id;
+ }
+
+ /*
+ * touchscreen emulation: if this is the first finger, wait for the
+ * second; the oldest is then the second if it was the oldest already
+ * or if there was no first, the first otherwise.
+ */
+ if (td->first) {
+ td->firstx = td->x;
+ td->firsty = td->y;
+ td->firstid = td->id;
+ } else {
+ int x, y, oldest;
+ if (td->id == td->oldest || td->firstid < 0) {
+ x = td->x;
+ y = td->y;
+ oldest = td->id;
+ } else {
+ x = td->firstx;
+ y = td->firsty;
+ oldest = td->firstid;
+ }
+ input_event(input, EV_ABS, ABS_X, x);
+ input_event(input, EV_ABS, ABS_Y, y);
+ td->oldest = oldest;
+ }
+}
+
+
+static int cando_event(struct hid_device *hid, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ struct cando_data *td = hid_get_drvdata(hid);
+
+ if (hid->claimed & HID_CLAIMED_INPUT) {
+ struct input_dev *input = field->hidinput->input;
+
+ switch (usage->hid) {
+ case HID_DG_INRANGE:
+ td->valid = value;
+ break;
+ case HID_DG_CONTACTID:
+ td->id = value;
+ break;
+ case HID_GD_X:
+ td->x = value;
+ break;
+ case HID_GD_Y:
+ td->y = value;
+ cando_filter_event(td, input);
+ break;
+ case HID_DG_TIPSWITCH:
+ /* avoid interference from generic hidinput handling */
+ break;
+
+ default:
+ /* fallback to the generic hidinput handling */
+ return 0;
+ }
+ }
+
+ /* we have handled the hidinput part, now remains hiddev */
+ if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+ hid->hiddev_hid_event(hid, field, usage, value);
+
+ return 1;
+}
+
+static int cando_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int ret;
+ struct cando_data *td;
+
+ td = kmalloc(sizeof(struct cando_data), GFP_KERNEL);
+ if (!td) {
+ dev_err(&hdev->dev, "cannot allocate Cando Touch data\n");
+ return -ENOMEM;
+ }
+ hid_set_drvdata(hdev, td);
+ td->first = false;
+ td->oldest = -1;
+ td->valid = false;
+
+ ret = hid_parse(hdev);
+ if (!ret)
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+ if (ret)
+ kfree(td);
+
+ return ret;
+}
+
+static void cando_remove(struct hid_device *hdev)
+{
+ hid_hw_stop(hdev);
+ kfree(hid_get_drvdata(hdev));
+ hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id cando_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
+ USB_DEVICE_ID_CANDO_MULTI_TOUCH) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
+ USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, cando_devices);
+
+static const struct hid_usage_id cando_grabbed_usages[] = {
+ { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+ { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver cando_driver = {
+ .name = "cando-touch",
+ .id_table = cando_devices,
+ .probe = cando_probe,
+ .remove = cando_remove,
+ .input_mapping = cando_input_mapping,
+ .input_mapped = cando_input_mapped,
+ .usage_table = cando_grabbed_usages,
+ .event = cando_event,
+};
+
+static int __init cando_init(void)
+{
+ return hid_register_driver(&cando_driver);
+}
+
+static void __exit cando_exit(void)
+{
+ hid_unregister_driver(&cando_driver);
+}
+
+module_init(cando_init);
+module_exit(cando_exit);
+
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 143e788..e10e314 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -653,10 +653,9 @@
if (device->driver->report_fixup)
device->driver->report_fixup(device, start, size);
- device->rdesc = kmalloc(size, GFP_KERNEL);
+ device->rdesc = kmemdup(start, size, GFP_KERNEL);
if (device->rdesc == NULL)
return -ENOMEM;
- memcpy(device->rdesc, start, size);
device->rsize = size;
parser = vmalloc(sizeof(struct hid_parser));
@@ -940,13 +939,8 @@
unsigned count = field->report_count;
unsigned offset = field->report_offset;
unsigned size = field->report_size;
- unsigned bitsused = offset + count * size;
unsigned n;
- /* make sure the unused bits in the last byte are zeros */
- if (count > 0 && size > 0 && (bitsused % 8) != 0)
- data[(bitsused-1)/8] &= (1 << (bitsused % 8)) - 1;
-
for (n = 0; n < count; n++) {
if (field->logical_minimum < 0) /* signed values */
implement(data, offset + n * size, size, s32ton(field->value[n], size));
@@ -966,6 +960,7 @@
if (report->id > 0)
*data++ = report->id;
+ memset(data, 0, ((report->size - 1) >> 3) + 1);
for (n = 0; n < report->maxfield; n++)
hid_output_field(report->field[n], data);
}
@@ -1086,35 +1081,28 @@
buf = kmalloc(sizeof(char) * HID_DEBUG_BUFSIZE, GFP_ATOMIC);
- if (!buf) {
- report = hid_get_report(report_enum, data);
+ if (!buf)
goto nomem;
- }
-
- snprintf(buf, HID_DEBUG_BUFSIZE - 1,
- "\nreport (size %u) (%snumbered)\n", size, report_enum->numbered ? "" : "un");
- hid_debug_event(hid, buf);
-
- report = hid_get_report(report_enum, data);
- if (!report) {
- kfree(buf);
- return -1;
- }
/* dump the report */
snprintf(buf, HID_DEBUG_BUFSIZE - 1,
- "report %d (size %u) = ", report->id, size);
+ "\nreport (size %u) (%snumbered) = ", size, report_enum->numbered ? "" : "un");
hid_debug_event(hid, buf);
+
for (i = 0; i < size; i++) {
snprintf(buf, HID_DEBUG_BUFSIZE - 1,
" %02x", data[i]);
hid_debug_event(hid, buf);
}
hid_debug_event(hid, "\n");
-
kfree(buf);
nomem:
+ report = hid_get_report(report_enum, data);
+
+ if (!report)
+ return -1;
+
if (hdrv && hdrv->raw_event && hid_match_report(hid, report)) {
ret = hdrv->raw_event(hid, report, data, size);
if (ret != 0)
@@ -1167,6 +1155,8 @@
unsigned int i;
int len;
+ if (hdev->quirks & HID_QUIRK_HIDDEV_FORCE)
+ connect_mask |= (HID_CONNECT_HIDDEV_FORCE | HID_CONNECT_HIDDEV);
if (hdev->bus != BUS_USB)
connect_mask &= ~HID_CONNECT_HIDDEV;
if (hid_hiddev(hdev))
@@ -1246,6 +1236,7 @@
/* a list of devices for which there is a specialized driver on HID bus */
static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M2256) },
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
@@ -1290,14 +1281,19 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
@@ -1331,6 +1327,8 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_LK6K) },
@@ -1342,7 +1340,9 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
@@ -1359,8 +1359,10 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ZYDACRON, USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) },
{ }
@@ -1757,7 +1759,7 @@
/* we need to kill them here, otherwise they will stay allocated to
* wait for coming driver */
- if (hid_ignore(hdev))
+ if (!(hdev->quirks & HID_QUIRK_NO_IGNORE) && hid_ignore(hdev))
return -ENODEV;
/* XXX hack, any other cleaner solution after the driver core
@@ -1765,11 +1767,12 @@
dev_set_name(&hdev->dev, "%04X:%04X:%04X.%04X", hdev->bus,
hdev->vendor, hdev->product, atomic_inc_return(&id));
+ hid_debug_register(hdev, dev_name(&hdev->dev));
ret = device_add(&hdev->dev);
if (!ret)
hdev->status |= HID_STAT_ADDED;
-
- hid_debug_register(hdev, dev_name(&hdev->dev));
+ else
+ hid_debug_unregister(hdev);
return ret;
}
diff --git a/drivers/hid/hid-egalax.c b/drivers/hid/hid-egalax.c
new file mode 100644
index 0000000..f44bdc0
--- /dev/null
+++ b/drivers/hid/hid-egalax.c
@@ -0,0 +1,281 @@
+/*
+ * HID driver for eGalax dual-touch panels
+ *
+ * Copyright (c) 2010 Stephane Chatty <chatty@enac.fr>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include "usbhid/usbhid.h"
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("eGalax dual-touch panel");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct egalax_data {
+ __u16 x, y, z;
+ __u8 id;
+ bool first; /* is this the first finger in the frame? */
+ bool valid; /* valid finger data, or just placeholder? */
+ bool activity; /* at least one active finger previously? */
+ __u16 lastx, lasty; /* latest valid (x, y) in the frame */
+};
+
+static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ switch (usage->hid & HID_USAGE_PAGE) {
+
+ case HID_UP_GENDESK:
+ switch (usage->hid) {
+ case HID_GD_X:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_X);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_X,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ case HID_GD_Y:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_Y);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_Y,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ }
+ return 0;
+
+ case HID_UP_DIGITIZER:
+ switch (usage->hid) {
+ case HID_DG_TIPSWITCH:
+ /* touchscreen emulation */
+ hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+ return 1;
+ case HID_DG_INRANGE:
+ case HID_DG_CONFIDENCE:
+ case HID_DG_CONTACTCOUNT:
+ case HID_DG_CONTACTMAX:
+ return -1;
+ case HID_DG_CONTACTID:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TRACKING_ID);
+ return 1;
+ case HID_DG_TIPPRESSURE:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_PRESSURE);
+ return 1;
+ }
+ return 0;
+ }
+
+ /* ignore others (from other reports we won't get anyway) */
+ return -1;
+}
+
+static int egalax_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ if (usage->type == EV_KEY || usage->type == EV_ABS)
+ clear_bit(usage->code, *bit);
+
+ return 0;
+}
+
+/*
+ * this function is called when a whole finger has been parsed,
+ * so that it can decide what to send to the input layer.
+ */
+static void egalax_filter_event(struct egalax_data *td, struct input_dev *input)
+{
+ td->first = !td->first; /* touchscreen emulation */
+
+ if (td->valid) {
+ /* emit multitouch events */
+ input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
+ input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
+ input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
+ input_event(input, EV_ABS, ABS_MT_PRESSURE, td->z);
+
+ input_mt_sync(input);
+
+ /*
+ * touchscreen emulation: store (x, y) as
+ * the last valid values in this frame
+ */
+ td->lastx = td->x;
+ td->lasty = td->y;
+ }
+
+ /*
+ * touchscreen emulation: if this is the second finger and at least
+ * one in this frame is valid, the latest valid in the frame is
+ * the oldest on the panel, the one we want for single touch
+ */
+ if (!td->first && td->activity) {
+ input_event(input, EV_ABS, ABS_X, td->lastx);
+ input_event(input, EV_ABS, ABS_Y, td->lasty);
+ }
+
+ if (!td->valid) {
+ /*
+ * touchscreen emulation: if the first finger is invalid
+ * and there previously was finger activity, this is a release
+ */
+ if (td->first && td->activity) {
+ input_event(input, EV_KEY, BTN_TOUCH, 0);
+ td->activity = false;
+ }
+ return;
+ }
+
+
+ /* touchscreen emulation: if no previous activity, emit touch event */
+ if (!td->activity) {
+ input_event(input, EV_KEY, BTN_TOUCH, 1);
+ td->activity = true;
+ }
+}
+
+
+static int egalax_event(struct hid_device *hid, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ struct egalax_data *td = hid_get_drvdata(hid);
+
+ if (hid->claimed & HID_CLAIMED_INPUT) {
+ struct input_dev *input = field->hidinput->input;
+
+ switch (usage->hid) {
+ case HID_DG_INRANGE:
+ case HID_DG_CONFIDENCE:
+ /* avoid interference from generic hidinput handling */
+ break;
+ case HID_DG_TIPSWITCH:
+ td->valid = value;
+ break;
+ case HID_DG_TIPPRESSURE:
+ td->z = value;
+ break;
+ case HID_DG_CONTACTID:
+ td->id = value;
+ break;
+ case HID_GD_X:
+ td->x = value;
+ break;
+ case HID_GD_Y:
+ td->y = value;
+ /* this is the last field in a finger */
+ egalax_filter_event(td, input);
+ break;
+ case HID_DG_CONTACTCOUNT:
+ /* touch emulation: this is the last field in a frame */
+ td->first = false;
+ break;
+
+ default:
+ /* fallback to the generic hidinput handling */
+ return 0;
+ }
+ }
+
+ /* we have handled the hidinput part, now remains hiddev */
+ if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+ hid->hiddev_hid_event(hid, field, usage, value);
+
+ return 1;
+}
+
+static int egalax_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int ret;
+ struct egalax_data *td;
+ struct hid_report *report;
+
+ td = kmalloc(sizeof(struct egalax_data), GFP_KERNEL);
+ if (!td) {
+ dev_err(&hdev->dev, "cannot allocate eGalax data\n");
+ return -ENOMEM;
+ }
+ hid_set_drvdata(hdev, td);
+
+ ret = hid_parse(hdev);
+ if (ret)
+ goto end;
+
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (ret)
+ goto end;
+
+ report = hdev->report_enum[HID_FEATURE_REPORT].report_id_hash[5];
+ if (report) {
+ report->field[0]->value[0] = 2;
+ usbhid_submit_report(hdev, report, USB_DIR_OUT);
+ }
+
+end:
+ if (ret)
+ kfree(td);
+
+ return ret;
+}
+
+static void egalax_remove(struct hid_device *hdev)
+{
+ hid_hw_stop(hdev);
+ kfree(hid_get_drvdata(hdev));
+ hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id egalax_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+ USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, egalax_devices);
+
+static const struct hid_usage_id egalax_grabbed_usages[] = {
+ { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+ { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver egalax_driver = {
+ .name = "egalax-touch",
+ .id_table = egalax_devices,
+ .probe = egalax_probe,
+ .remove = egalax_remove,
+ .input_mapping = egalax_input_mapping,
+ .input_mapped = egalax_input_mapped,
+ .usage_table = egalax_grabbed_usages,
+ .event = egalax_event,
+};
+
+static int __init egalax_init(void)
+{
+ return hid_register_driver(&egalax_driver);
+}
+
+static void __exit egalax_exit(void)
+{
+ hid_unregister_driver(&egalax_driver);
+}
+
+module_init(egalax_init);
+module_exit(egalax_exit);
+
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 09d2764..9776896 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -20,6 +20,7 @@
#define USB_VENDOR_ID_3M 0x0596
#define USB_DEVICE_ID_3M1968 0x0500
+#define USB_DEVICE_ID_3M2256 0x0502
#define USB_VENDOR_ID_A4TECH 0x09da
#define USB_DEVICE_ID_A4TECH_WCP32PU 0x0006
@@ -123,6 +124,13 @@
#define USB_VENDOR_ID_BERKSHIRE 0x0c98
#define USB_DEVICE_ID_BERKSHIRE_PCWD 0x1140
+#define USB_VENDOR_ID_BTC 0x046e
+#define USB_DEVICE_ID_BTC_EMPREX_REMOTE 0x5578
+
+#define USB_VENDOR_ID_CANDO 0x2087
+#define USB_DEVICE_ID_CANDO_MULTI_TOUCH 0x0a01
+#define USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6 0x0b03
+
#define USB_VENDOR_ID_CH 0x068e
#define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2
#define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4
@@ -148,6 +156,9 @@
#define USB_DEVICE_ID_CODEMERCS_IOW_FIRST 0x1500
#define USB_DEVICE_ID_CODEMERCS_IOW_LAST 0x15ff
+#define USB_VENDOR_ID_CREATIVELABS 0x041e
+#define USB_DEVICE_ID_PRODIKEYS_PCMIDI 0x2801
+
#define USB_VENDOR_ID_CYGNAL 0x10c4
#define USB_DEVICE_ID_CYGNAL_RADIO_SI470X 0x818a
@@ -171,6 +182,10 @@
#define USB_VENDOR_ID_DRAGONRISE 0x0079
+#define USB_VENDOR_ID_DWAV 0x0eef
+#define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER 0x0001
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH 0x480d
+
#define USB_VENDOR_ID_ELO 0x04E7
#define USB_DEVICE_ID_ELO_TS2700 0x0020
@@ -342,6 +357,8 @@
#define USB_VENDOR_ID_MICROCHIP 0x04d8
#define USB_DEVICE_ID_PICKIT1 0x0032
#define USB_DEVICE_ID_PICKIT2 0x0033
+#define USB_DEVICE_ID_PICOLCD 0xc002
+#define USB_DEVICE_ID_PICOLCD_BOOTLOADER 0xf002
#define USB_VENDOR_ID_MICROSOFT 0x045e
#define USB_DEVICE_ID_SIDEWINDER_GV 0x003b
@@ -400,6 +417,9 @@
#define USB_VENDOR_ID_PRODIGE 0x05af
#define USB_DEVICE_ID_PRODIGE_CORDLESS 0x3062
+#define USB_VENDOR_ID_ROCCAT 0x1e7d
+#define USB_DEVICE_ID_ROCCAT_KONE 0x2ced
+
#define USB_VENDOR_ID_SAITEK 0x06a3
#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
@@ -409,6 +429,7 @@
#define USB_VENDOR_ID_SAMSUNG 0x0419
#define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001
+#define USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE 0x0600
#define USB_VENDOR_ID_SONY 0x054c
#define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE 0x024b
@@ -457,6 +478,7 @@
#define USB_VENDOR_ID_WACOM 0x056a
#define USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH 0x81
+#define USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH 0xbd
#define USB_VENDOR_ID_WISEGROUP 0x0925
#define USB_DEVICE_ID_SMARTJOY_PLUS 0x0005
@@ -475,6 +497,9 @@
#define USB_VENDOR_ID_ZEROPLUS 0x0c12
+#define USB_VENDOR_ID_ZYDACRON 0x13EC
+#define USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL 0x0006
+
#define USB_VENDOR_ID_KYE 0x0458
#define USB_DEVICE_ID_KYE_ERGO_525V 0x0087
#define USB_DEVICE_ID_KYE_GPEN_560 0x5003
diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c
index 3677c90..f6433d8 100644
--- a/drivers/hid/hid-lg.c
+++ b/drivers/hid/hid-lg.c
@@ -126,6 +126,9 @@
case 0x1004: lg_map_key_clear(KEY_VIDEO); break;
case 0x1005: lg_map_key_clear(KEY_AUDIO); break;
case 0x100a: lg_map_key_clear(KEY_DOCUMENTS); break;
+ /* The following two entries are Playlist 1 and 2 on the MX3200 */
+ case 0x100f: lg_map_key_clear(KEY_FN_1); break;
+ case 0x1010: lg_map_key_clear(KEY_FN_2); break;
case 0x1011: lg_map_key_clear(KEY_PREVIOUSSONG); break;
case 0x1012: lg_map_key_clear(KEY_NEXTSONG); break;
case 0x1013: lg_map_key_clear(KEY_CAMERA); break;
@@ -137,6 +140,7 @@
case 0x1019: lg_map_key_clear(KEY_PROG1); break;
case 0x101a: lg_map_key_clear(KEY_PROG2); break;
case 0x101b: lg_map_key_clear(KEY_PROG3); break;
+ case 0x101c: lg_map_key_clear(KEY_CYCLEWINDOWS); break;
case 0x101f: lg_map_key_clear(KEY_ZOOMIN); break;
case 0x1020: lg_map_key_clear(KEY_ZOOMOUT); break;
case 0x1021: lg_map_key_clear(KEY_ZOOMRESET); break;
@@ -147,6 +151,11 @@
case 0x1029: lg_map_key_clear(KEY_SHUFFLE); break;
case 0x102a: lg_map_key_clear(KEY_BACK); break;
case 0x102b: lg_map_key_clear(KEY_CYCLEWINDOWS); break;
+ case 0x102d: lg_map_key_clear(KEY_WWW); break;
+ /* The following two are 'Start/answer call' and 'End/reject call'
+ on the MX3200 */
+ case 0x1031: lg_map_key_clear(KEY_OK); break;
+ case 0x1032: lg_map_key_clear(KEY_CANCEL); break;
case 0x1041: lg_map_key_clear(KEY_BATTERY); break;
case 0x1042: lg_map_key_clear(KEY_WORDPROCESSOR); break;
case 0x1043: lg_map_key_clear(KEY_SPREADSHEET); break;
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index 0d471fc2..f10d56a 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -354,12 +354,15 @@
goto err_free;
}
- ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_HIDINPUT);
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) {
dev_err(&hdev->dev, "magicmouse hw start failed\n");
goto err_free;
}
+ /* we are handling the input ourselves */
+ hidinput_disconnect(hdev);
+
report = hid_register_report(hdev, HID_INPUT_REPORT, TOUCH_REPORT_ID);
if (!report) {
dev_err(&hdev->dev, "unable to register touch report\n");
diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c
index 4777bbf..b6b0cae 100644
--- a/drivers/hid/hid-ntrig.c
+++ b/drivers/hid/hid-ntrig.c
@@ -24,6 +24,34 @@
#define NTRIG_DUPLICATE_USAGES 0x001
+static unsigned int min_width;
+module_param(min_width, uint, 0644);
+MODULE_PARM_DESC(min_width, "Minimum touch contact width to accept.");
+
+static unsigned int min_height;
+module_param(min_height, uint, 0644);
+MODULE_PARM_DESC(min_height, "Minimum touch contact height to accept.");
+
+static unsigned int activate_slack = 1;
+module_param(activate_slack, uint, 0644);
+MODULE_PARM_DESC(activate_slack, "Number of touch frames to ignore at "
+ "the start of touch input.");
+
+static unsigned int deactivate_slack = 4;
+module_param(deactivate_slack, uint, 0644);
+MODULE_PARM_DESC(deactivate_slack, "Number of empty frames to ignore before "
+ "deactivating touch.");
+
+static unsigned int activation_width = 64;
+module_param(activation_width, uint, 0644);
+MODULE_PARM_DESC(activation_width, "Width threshold to immediately start "
+ "processing touch events.");
+
+static unsigned int activation_height = 32;
+module_param(activation_height, uint, 0644);
+MODULE_PARM_DESC(activation_height, "Height threshold to immediately start "
+ "processing touch events.");
+
struct ntrig_data {
/* Incoming raw values for a single contact */
__u16 x, y, w, h;
@@ -37,6 +65,309 @@
__u8 mt_footer[4];
__u8 mt_foot_count;
+
+ /* The current activation state. */
+ __s8 act_state;
+
+ /* Empty frames to ignore before recognizing the end of activity */
+ __s8 deactivate_slack;
+
+ /* Frames to ignore before acknowledging the start of activity */
+ __s8 activate_slack;
+
+ /* Minimum size contact to accept */
+ __u16 min_width;
+ __u16 min_height;
+
+ /* Threshold to override activation slack */
+ __u16 activation_width;
+ __u16 activation_height;
+
+ __u16 sensor_logical_width;
+ __u16 sensor_logical_height;
+ __u16 sensor_physical_width;
+ __u16 sensor_physical_height;
+};
+
+
+static ssize_t show_phys_width(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->sensor_physical_width);
+}
+
+static DEVICE_ATTR(sensor_physical_width, S_IRUGO, show_phys_width, NULL);
+
+static ssize_t show_phys_height(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->sensor_physical_height);
+}
+
+static DEVICE_ATTR(sensor_physical_height, S_IRUGO, show_phys_height, NULL);
+
+static ssize_t show_log_width(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->sensor_logical_width);
+}
+
+static DEVICE_ATTR(sensor_logical_width, S_IRUGO, show_log_width, NULL);
+
+static ssize_t show_log_height(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->sensor_logical_height);
+}
+
+static DEVICE_ATTR(sensor_logical_height, S_IRUGO, show_log_height, NULL);
+
+static ssize_t show_min_width(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->min_width *
+ nd->sensor_physical_width /
+ nd->sensor_logical_width);
+}
+
+static ssize_t set_min_width(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ unsigned long val;
+
+ if (strict_strtoul(buf, 0, &val))
+ return -EINVAL;
+
+ if (val > nd->sensor_physical_width)
+ return -EINVAL;
+
+ nd->min_width = val * nd->sensor_logical_width /
+ nd->sensor_physical_width;
+
+ return count;
+}
+
+static DEVICE_ATTR(min_width, S_IWUSR | S_IRUGO, show_min_width, set_min_width);
+
+static ssize_t show_min_height(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->min_height *
+ nd->sensor_physical_height /
+ nd->sensor_logical_height);
+}
+
+static ssize_t set_min_height(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ unsigned long val;
+
+ if (strict_strtoul(buf, 0, &val))
+ return -EINVAL;
+
+ if (val > nd->sensor_physical_height)
+ return -EINVAL;
+
+ nd->min_height = val * nd->sensor_logical_height /
+ nd->sensor_physical_height;
+
+ return count;
+}
+
+static DEVICE_ATTR(min_height, S_IWUSR | S_IRUGO, show_min_height,
+ set_min_height);
+
+static ssize_t show_activate_slack(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->activate_slack);
+}
+
+static ssize_t set_activate_slack(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ unsigned long val;
+
+ if (strict_strtoul(buf, 0, &val))
+ return -EINVAL;
+
+ if (val > 0x7f)
+ return -EINVAL;
+
+ nd->activate_slack = val;
+
+ return count;
+}
+
+static DEVICE_ATTR(activate_slack, S_IWUSR | S_IRUGO, show_activate_slack,
+ set_activate_slack);
+
+static ssize_t show_activation_width(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->activation_width *
+ nd->sensor_physical_width /
+ nd->sensor_logical_width);
+}
+
+static ssize_t set_activation_width(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ unsigned long val;
+
+ if (strict_strtoul(buf, 0, &val))
+ return -EINVAL;
+
+ if (val > nd->sensor_physical_width)
+ return -EINVAL;
+
+ nd->activation_width = val * nd->sensor_logical_width /
+ nd->sensor_physical_width;
+
+ return count;
+}
+
+static DEVICE_ATTR(activation_width, S_IWUSR | S_IRUGO, show_activation_width,
+ set_activation_width);
+
+static ssize_t show_activation_height(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", nd->activation_height *
+ nd->sensor_physical_height /
+ nd->sensor_logical_height);
+}
+
+static ssize_t set_activation_height(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ unsigned long val;
+
+ if (strict_strtoul(buf, 0, &val))
+ return -EINVAL;
+
+ if (val > nd->sensor_physical_height)
+ return -EINVAL;
+
+ nd->activation_height = val * nd->sensor_logical_height /
+ nd->sensor_physical_height;
+
+ return count;
+}
+
+static DEVICE_ATTR(activation_height, S_IWUSR | S_IRUGO,
+ show_activation_height, set_activation_height);
+
+static ssize_t show_deactivate_slack(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ return sprintf(buf, "%d\n", -nd->deactivate_slack);
+}
+
+static ssize_t set_deactivate_slack(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
+ unsigned long val;
+
+ if (strict_strtoul(buf, 0, &val))
+ return -EINVAL;
+
+ /*
+ * No more than 8 terminal frames have been observed so far
+ * and higher slack is highly likely to leave the single
+ * touch emulation stuck down.
+ */
+ if (val > 7)
+ return -EINVAL;
+
+ nd->deactivate_slack = -val;
+
+ return count;
+}
+
+static DEVICE_ATTR(deactivate_slack, S_IWUSR | S_IRUGO, show_deactivate_slack,
+ set_deactivate_slack);
+
+static struct attribute *sysfs_attrs[] = {
+ &dev_attr_sensor_physical_width.attr,
+ &dev_attr_sensor_physical_height.attr,
+ &dev_attr_sensor_logical_width.attr,
+ &dev_attr_sensor_logical_height.attr,
+ &dev_attr_min_height.attr,
+ &dev_attr_min_width.attr,
+ &dev_attr_activate_slack.attr,
+ &dev_attr_activation_width.attr,
+ &dev_attr_activation_height.attr,
+ &dev_attr_deactivate_slack.attr,
+ NULL
+};
+
+static struct attribute_group ntrig_attribute_group = {
+ .attrs = sysfs_attrs
};
/*
@@ -49,6 +380,8 @@
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
+ struct ntrig_data *nd = hid_get_drvdata(hdev);
+
/* No special mappings needed for the pen and single touch */
if (field->physical)
return 0;
@@ -62,6 +395,21 @@
input_set_abs_params(hi->input, ABS_X,
field->logical_minimum,
field->logical_maximum, 0, 0);
+
+ if (!nd->sensor_logical_width) {
+ nd->sensor_logical_width =
+ field->logical_maximum -
+ field->logical_minimum;
+ nd->sensor_physical_width =
+ field->physical_maximum -
+ field->physical_minimum;
+ nd->activation_width = activation_width *
+ nd->sensor_logical_width /
+ nd->sensor_physical_width;
+ nd->min_width = min_width *
+ nd->sensor_logical_width /
+ nd->sensor_physical_width;
+ }
return 1;
case HID_GD_Y:
hid_map_usage(hi, usage, bit, max,
@@ -69,6 +417,21 @@
input_set_abs_params(hi->input, ABS_Y,
field->logical_minimum,
field->logical_maximum, 0, 0);
+
+ if (!nd->sensor_logical_height) {
+ nd->sensor_logical_height =
+ field->logical_maximum -
+ field->logical_minimum;
+ nd->sensor_physical_height =
+ field->physical_maximum -
+ field->physical_minimum;
+ nd->activation_height = activation_height *
+ nd->sensor_logical_height /
+ nd->sensor_physical_height;
+ nd->min_height = min_height *
+ nd->sensor_logical_height /
+ nd->sensor_physical_height;
+ }
return 1;
}
return 0;
@@ -201,20 +564,68 @@
if (nd->mt_foot_count != 4)
break;
- /* Pen activity signal, trigger end of touch. */
+ /* Pen activity signal. */
if (nd->mt_footer[2]) {
+ /*
+ * When the pen deactivates touch, we see a
+ * bogus frame with ContactCount > 0.
+ * We can
+ * save a bit of work by ensuring act_state < 0
+ * even if deactivation slack is turned off.
+ */
+ nd->act_state = deactivate_slack - 1;
nd->confidence = 0;
break;
}
- /* If the contact was invalid */
- if (!(nd->confidence && nd->mt_footer[0])
- || nd->w <= 250
- || nd->h <= 190) {
- nd->confidence = 0;
+ /*
+ * The first footer value indicates the presence of a
+ * finger.
+ */
+ if (nd->mt_footer[0]) {
+ /*
+ * We do not want to process contacts under
+ * the size threshold, but do not want to
+ * ignore them for activation state
+ */
+ if (nd->w < nd->min_width ||
+ nd->h < nd->min_height)
+ nd->confidence = 0;
+ } else
break;
+
+ if (nd->act_state > 0) {
+ /*
+ * Contact meets the activation size threshold
+ */
+ if (nd->w >= nd->activation_width &&
+ nd->h >= nd->activation_height) {
+ if (nd->id)
+ /*
+ * first contact, activate now
+ */
+ nd->act_state = 0;
+ else {
+ /*
+ * avoid corrupting this frame
+ * but ensure next frame will
+ * be active
+ */
+ nd->act_state = 1;
+ break;
+ }
+ } else
+ /*
+ * Defer adjusting the activation state
+ * until the end of the frame.
+ */
+ break;
}
+ /* Discarding this contact */
+ if (!nd->confidence)
+ break;
+
/* emit a normal (X, Y) for the first point only */
if (nd->id == 0) {
/*
@@ -227,8 +638,15 @@
input_event(input, EV_ABS, ABS_X, nd->x);
input_event(input, EV_ABS, ABS_Y, nd->y);
}
+
+ /* Emit MT events */
input_event(input, EV_ABS, ABS_MT_POSITION_X, nd->x);
input_event(input, EV_ABS, ABS_MT_POSITION_Y, nd->y);
+
+ /*
+ * Translate from height and width to size
+ * and orientation.
+ */
if (nd->w > nd->h) {
input_event(input, EV_ABS,
ABS_MT_ORIENTATION, 1);
@@ -248,12 +666,88 @@
break;
case HID_DG_CONTACTCOUNT: /* End of a multitouch group */
- if (!nd->reading_mt)
+ if (!nd->reading_mt) /* Just to be sure */
break;
nd->reading_mt = 0;
- if (nd->first_contact_touch) {
+
+ /*
+ * Activation state machine logic:
+ *
+ * Fundamental states:
+ * state > 0: Inactive
+ * state <= 0: Active
+ * state < -deactivate_slack:
+ * Pen termination of touch
+ *
+ * Specific values of interest
+ * state == activate_slack
+ * no valid input since the last reset
+ *
+ * state == 0
+ * general operational state
+ *
+ * state == -deactivate_slack
+ * read sufficient empty frames to accept
+ * the end of input and reset
+ */
+
+ if (nd->act_state > 0) { /* Currently inactive */
+ if (value)
+ /*
+ * Consider each live contact as
+ * evidence of intentional activity.
+ */
+ nd->act_state = (nd->act_state > value)
+ ? nd->act_state - value
+ : 0;
+ else
+ /*
+ * Empty frame before we hit the
+ * activity threshold, reset.
+ */
+ nd->act_state = nd->activate_slack;
+
+ /*
+ * Entered this block inactive and no
+ * coordinates sent this frame, so hold off
+ * on button state.
+ */
+ break;
+ } else { /* Currently active */
+ if (value && nd->act_state >=
+ nd->deactivate_slack)
+ /*
+ * Live point: clear accumulated
+ * deactivation count.
+ */
+ nd->act_state = 0;
+ else if (nd->act_state <= nd->deactivate_slack)
+ /*
+ * We've consumed the deactivation
+ * slack, time to deactivate and reset.
+ */
+ nd->act_state =
+ nd->activate_slack;
+ else { /* Move towards deactivation */
+ nd->act_state--;
+ break;
+ }
+ }
+
+ if (nd->first_contact_touch && nd->act_state <= 0) {
+ /*
+ * Check to see if we're ready to start
+ * emitting touch events.
+ *
+ * Note: activation slack will decrease over
+ * the course of the frame, and it will be
+ * inconsistent from the start to the end of
+ * the frame. However if the frame starts
+ * with slack, first_contact_touch will still
+ * be 0 and we will not get to this point.
+ */
input_report_key(input, BTN_TOOL_DOUBLETAP, 1);
input_report_key(input, BTN_TOUCH, 1);
} else {
@@ -263,7 +757,7 @@
break;
default:
- /* fallback to the generic hidinput handling */
+ /* fall-back to the generic hidinput handling */
return 0;
}
}
@@ -293,6 +787,16 @@
}
nd->reading_mt = 0;
+ nd->min_width = 0;
+ nd->min_height = 0;
+ nd->activate_slack = activate_slack;
+ nd->act_state = activate_slack;
+ nd->deactivate_slack = -deactivate_slack;
+ nd->sensor_logical_width = 0;
+ nd->sensor_logical_height = 0;
+ nd->sensor_physical_width = 0;
+ nd->sensor_physical_height = 0;
+
hid_set_drvdata(hdev, nd);
ret = hid_parse(hdev);
@@ -344,6 +848,8 @@
if (report)
usbhid_submit_report(hdev, report, USB_DIR_OUT);
+ ret = sysfs_create_group(&hdev->dev.kobj,
+ &ntrig_attribute_group);
return 0;
err_free:
@@ -353,6 +859,8 @@
static void ntrig_remove(struct hid_device *hdev)
{
+ sysfs_remove_group(&hdev->dev.kobj,
+ &ntrig_attribute_group);
hid_hw_stop(hdev);
kfree(hid_get_drvdata(hdev));
}
diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c
new file mode 100644
index 0000000..7aabf65
--- /dev/null
+++ b/drivers/hid/hid-picolcd.c
@@ -0,0 +1,2631 @@
+/***************************************************************************
+ * Copyright (C) 2010 by Bruno Prémont <bonbons@linux-vserver.org> *
+ * *
+ * Based on Logitech G13 driver (v0.4) *
+ * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, version 2 of the License. *
+ * *
+ * This driver is distributed in the hope that it will be useful, but *
+ * WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU *
+ * General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this software. If not see <http://www.gnu.org/licenses/>. *
+ ***************************************************************************/
+
+#include <linux/hid.h>
+#include <linux/hid-debug.h>
+#include <linux/input.h>
+#include "hid-ids.h"
+#include "usbhid/usbhid.h"
+#include <linux/usb.h>
+
+#include <linux/fb.h>
+#include <linux/vmalloc.h>
+#include <linux/backlight.h>
+#include <linux/lcd.h>
+
+#include <linux/leds.h>
+
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
+
+#include <linux/completion.h>
+#include <linux/uaccess.h>
+
+#define PICOLCD_NAME "PicoLCD (graphic)"
+
+/* Report numbers */
+#define REPORT_ERROR_CODE 0x10 /* LCD: IN[16] */
+#define ERR_SUCCESS 0x00
+#define ERR_PARAMETER_MISSING 0x01
+#define ERR_DATA_MISSING 0x02
+#define ERR_BLOCK_READ_ONLY 0x03
+#define ERR_BLOCK_NOT_ERASABLE 0x04
+#define ERR_BLOCK_TOO_BIG 0x05
+#define ERR_SECTION_OVERFLOW 0x06
+#define ERR_INVALID_CMD_LEN 0x07
+#define ERR_INVALID_DATA_LEN 0x08
+#define REPORT_KEY_STATE 0x11 /* LCD: IN[2] */
+#define REPORT_IR_DATA 0x21 /* LCD: IN[63] */
+#define REPORT_EE_DATA 0x32 /* LCD: IN[63] */
+#define REPORT_MEMORY 0x41 /* LCD: IN[63] */
+#define REPORT_LED_STATE 0x81 /* LCD: OUT[1] */
+#define REPORT_BRIGHTNESS 0x91 /* LCD: OUT[1] */
+#define REPORT_CONTRAST 0x92 /* LCD: OUT[1] */
+#define REPORT_RESET 0x93 /* LCD: OUT[2] */
+#define REPORT_LCD_CMD 0x94 /* LCD: OUT[63] */
+#define REPORT_LCD_DATA 0x95 /* LCD: OUT[63] */
+#define REPORT_LCD_CMD_DATA 0x96 /* LCD: OUT[63] */
+#define REPORT_EE_READ 0xa3 /* LCD: OUT[63] */
+#define REPORT_EE_WRITE 0xa4 /* LCD: OUT[63] */
+#define REPORT_ERASE_MEMORY 0xb2 /* LCD: OUT[2] */
+#define REPORT_READ_MEMORY 0xb3 /* LCD: OUT[3] */
+#define REPORT_WRITE_MEMORY 0xb4 /* LCD: OUT[63] */
+#define REPORT_SPLASH_RESTART 0xc1 /* LCD: OUT[1] */
+#define REPORT_EXIT_KEYBOARD 0xef /* LCD: OUT[2] */
+#define REPORT_VERSION 0xf1 /* LCD: IN[2],OUT[1] Bootloader: IN[2],OUT[1] */
+#define REPORT_BL_ERASE_MEMORY 0xf2 /* Bootloader: IN[36],OUT[4] */
+#define REPORT_BL_READ_MEMORY 0xf3 /* Bootloader: IN[36],OUT[4] */
+#define REPORT_BL_WRITE_MEMORY 0xf4 /* Bootloader: IN[36],OUT[36] */
+#define REPORT_DEVID 0xf5 /* LCD: IN[5], OUT[1] Bootloader: IN[5],OUT[1] */
+#define REPORT_SPLASH_SIZE 0xf6 /* LCD: IN[4], OUT[1] */
+#define REPORT_HOOK_VERSION 0xf7 /* LCD: IN[2], OUT[1] */
+#define REPORT_EXIT_FLASHER 0xff /* Bootloader: OUT[2] */
+
+#ifdef CONFIG_HID_PICOLCD_FB
+/* Framebuffer
+ *
+ * The PicoLCD use a Topway LCD module of 256x64 pixel
+ * This display area is tiled over 4 controllers with 8 tiles
+ * each. Each tile has 8x64 pixel, each data byte representing
+ * a 1-bit wide vertical line of the tile.
+ *
+ * The display can be updated at a tile granularity.
+ *
+ * Chip 1 Chip 2 Chip 3 Chip 4
+ * +----------------+----------------+----------------+----------------+
+ * | Tile 1 | Tile 1 | Tile 1 | Tile 1 |
+ * +----------------+----------------+----------------+----------------+
+ * | Tile 2 | Tile 2 | Tile 2 | Tile 2 |
+ * +----------------+----------------+----------------+----------------+
+ * ...
+ * +----------------+----------------+----------------+----------------+
+ * | Tile 8 | Tile 8 | Tile 8 | Tile 8 |
+ * +----------------+----------------+----------------+----------------+
+ */
+#define PICOLCDFB_NAME "picolcdfb"
+#define PICOLCDFB_WIDTH (256)
+#define PICOLCDFB_HEIGHT (64)
+#define PICOLCDFB_SIZE (PICOLCDFB_WIDTH * PICOLCDFB_HEIGHT / 8)
+
+#define PICOLCDFB_UPDATE_RATE_LIMIT 10
+#define PICOLCDFB_UPDATE_RATE_DEFAULT 2
+
+/* Framebuffer visual structures */
+static const struct fb_fix_screeninfo picolcdfb_fix = {
+ .id = PICOLCDFB_NAME,
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_MONO01,
+ .xpanstep = 0,
+ .ypanstep = 0,
+ .ywrapstep = 0,
+ .line_length = PICOLCDFB_WIDTH / 8,
+ .accel = FB_ACCEL_NONE,
+};
+
+static const struct fb_var_screeninfo picolcdfb_var = {
+ .xres = PICOLCDFB_WIDTH,
+ .yres = PICOLCDFB_HEIGHT,
+ .xres_virtual = PICOLCDFB_WIDTH,
+ .yres_virtual = PICOLCDFB_HEIGHT,
+ .width = 103,
+ .height = 26,
+ .bits_per_pixel = 1,
+ .grayscale = 1,
+};
+#endif /* CONFIG_HID_PICOLCD_FB */
+
+/* Input device
+ *
+ * The PicoLCD has an IR receiver header, a built-in keypad with 5 keys
+ * and header for 4x4 key matrix. The built-in keys are part of the matrix.
+ */
+static const unsigned short def_keymap[] = {
+ KEY_RESERVED, /* none */
+ KEY_BACK, /* col 4 + row 1 */
+ KEY_HOMEPAGE, /* col 3 + row 1 */
+ KEY_RESERVED, /* col 2 + row 1 */
+ KEY_RESERVED, /* col 1 + row 1 */
+ KEY_SCROLLUP, /* col 4 + row 2 */
+ KEY_OK, /* col 3 + row 2 */
+ KEY_SCROLLDOWN, /* col 2 + row 2 */
+ KEY_RESERVED, /* col 1 + row 2 */
+ KEY_RESERVED, /* col 4 + row 3 */
+ KEY_RESERVED, /* col 3 + row 3 */
+ KEY_RESERVED, /* col 2 + row 3 */
+ KEY_RESERVED, /* col 1 + row 3 */
+ KEY_RESERVED, /* col 4 + row 4 */
+ KEY_RESERVED, /* col 3 + row 4 */
+ KEY_RESERVED, /* col 2 + row 4 */
+ KEY_RESERVED, /* col 1 + row 4 */
+};
+#define PICOLCD_KEYS ARRAY_SIZE(def_keymap)
+
+/* Description of in-progress IO operation, used for operations
+ * that trigger response from device */
+struct picolcd_pending {
+ struct hid_report *out_report;
+ struct hid_report *in_report;
+ struct completion ready;
+ int raw_size;
+ u8 raw_data[64];
+};
+
+/* Per device data structure */
+struct picolcd_data {
+ struct hid_device *hdev;
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *debug_reset;
+ struct dentry *debug_eeprom;
+ struct dentry *debug_flash;
+ struct mutex mutex_flash;
+ int addr_sz;
+#endif
+ u8 version[2];
+ unsigned short opmode_delay;
+ /* input stuff */
+ u8 pressed_keys[2];
+ struct input_dev *input_keys;
+ struct input_dev *input_cir;
+ unsigned short keycode[PICOLCD_KEYS];
+
+#ifdef CONFIG_HID_PICOLCD_FB
+ /* Framebuffer stuff */
+ u8 fb_update_rate;
+ u8 fb_bpp;
+ u8 *fb_vbitmap; /* local copy of what was sent to PicoLCD */
+ u8 *fb_bitmap; /* framebuffer */
+ struct fb_info *fb_info;
+ struct fb_deferred_io fb_defio;
+#endif /* CONFIG_HID_PICOLCD_FB */
+#ifdef CONFIG_HID_PICOLCD_LCD
+ struct lcd_device *lcd;
+ u8 lcd_contrast;
+#endif /* CONFIG_HID_PICOLCD_LCD */
+#ifdef CONFIG_HID_PICOLCD_BACKLIGHT
+ struct backlight_device *backlight;
+ u8 lcd_brightness;
+ u8 lcd_power;
+#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */
+#ifdef CONFIG_HID_PICOLCD_LEDS
+ /* LED stuff */
+ u8 led_state;
+ struct led_classdev *led[8];
+#endif /* CONFIG_HID_PICOLCD_LEDS */
+
+ /* Housekeeping stuff */
+ spinlock_t lock;
+ struct mutex mutex;
+ struct picolcd_pending *pending;
+ int status;
+#define PICOLCD_BOOTLOADER 1
+#define PICOLCD_FAILED 2
+#define PICOLCD_READY_FB 4
+};
+
+
+/* Find a given report */
+#define picolcd_in_report(id, dev) picolcd_report(id, dev, HID_INPUT_REPORT)
+#define picolcd_out_report(id, dev) picolcd_report(id, dev, HID_OUTPUT_REPORT)
+
+static struct hid_report *picolcd_report(int id, struct hid_device *hdev, int dir)
+{
+ struct list_head *feature_report_list = &hdev->report_enum[dir].report_list;
+ struct hid_report *report = NULL;
+
+ list_for_each_entry(report, feature_report_list, list) {
+ if (report->id == id)
+ return report;
+ }
+ dev_warn(&hdev->dev, "No report with id 0x%x found\n", id);
+ return NULL;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void picolcd_debug_out_report(struct picolcd_data *data,
+ struct hid_device *hdev, struct hid_report *report);
+#define usbhid_submit_report(a, b, c) \
+ do { \
+ picolcd_debug_out_report(hid_get_drvdata(a), a, b); \
+ usbhid_submit_report(a, b, c); \
+ } while (0)
+#endif
+
+/* Submit a report and wait for a reply from device - if device fades away
+ * or does not respond in time, return NULL */
+static struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev,
+ int report_id, const u8 *raw_data, int size)
+{
+ struct picolcd_data *data = hid_get_drvdata(hdev);
+ struct picolcd_pending *work;
+ struct hid_report *report = picolcd_out_report(report_id, hdev);
+ unsigned long flags;
+ int i, j, k;
+
+ if (!report || !data)
+ return NULL;
+ if (data->status & PICOLCD_FAILED)
+ return NULL;
+ work = kzalloc(sizeof(*work), GFP_KERNEL);
+ if (!work)
+ return NULL;
+
+ init_completion(&work->ready);
+ work->out_report = report;
+ work->in_report = NULL;
+ work->raw_size = 0;
+
+ mutex_lock(&data->mutex);
+ spin_lock_irqsave(&data->lock, flags);
+ for (i = k = 0; i < report->maxfield; i++)
+ for (j = 0; j < report->field[i]->report_count; j++) {
+ hid_set_field(report->field[i], j, k < size ? raw_data[k] : 0);
+ k++;
+ }
+ data->pending = work;
+ usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
+ spin_unlock_irqrestore(&data->lock, flags);
+ wait_for_completion_interruptible_timeout(&work->ready, HZ*2);
+ spin_lock_irqsave(&data->lock, flags);
+ data->pending = NULL;
+ spin_unlock_irqrestore(&data->lock, flags);
+ mutex_unlock(&data->mutex);
+ return work;
+}
+
+#ifdef CONFIG_HID_PICOLCD_FB
+/* Send a given tile to PicoLCD */
+static int picolcd_fb_send_tile(struct hid_device *hdev, int chip, int tile)
+{
+ struct picolcd_data *data = hid_get_drvdata(hdev);
+ struct hid_report *report1 = picolcd_out_report(REPORT_LCD_CMD_DATA, hdev);
+ struct hid_report *report2 = picolcd_out_report(REPORT_LCD_DATA, hdev);
+ unsigned long flags;
+ u8 *tdata;
+ int i;
+
+ if (!report1 || report1->maxfield != 1 || !report2 || report2->maxfield != 1)
+ return -ENODEV;
+
+ spin_lock_irqsave(&data->lock, flags);
+ hid_set_field(report1->field[0], 0, chip << 2);
+ hid_set_field(report1->field[0], 1, 0x02);
+ hid_set_field(report1->field[0], 2, 0x00);
+ hid_set_field(report1->field[0], 3, 0x00);
+ hid_set_field(report1->field[0], 4, 0xb8 | tile);
+ hid_set_field(report1->field[0], 5, 0x00);
+ hid_set_field(report1->field[0], 6, 0x00);
+ hid_set_field(report1->field[0], 7, 0x40);
+ hid_set_field(report1->field[0], 8, 0x00);
+ hid_set_field(report1->field[0], 9, 0x00);
+ hid_set_field(report1->field[0], 10, 32);
+
+ hid_set_field(report2->field[0], 0, (chip << 2) | 0x01);
+ hid_set_field(report2->field[0], 1, 0x00);
+ hid_set_field(report2->field[0], 2, 0x00);
+ hid_set_field(report2->field[0], 3, 32);
+
+ tdata = data->fb_vbitmap + (tile * 4 + chip) * 64;
+ for (i = 0; i < 64; i++)
+ if (i < 32)
+ hid_set_field(report1->field[0], 11 + i, tdata[i]);
+ else
+ hid_set_field(report2->field[0], 4 + i - 32, tdata[i]);
+
+ usbhid_submit_report(data->hdev, report1, USB_DIR_OUT);
+ usbhid_submit_report(data->hdev, report2, USB_DIR_OUT);
+ spin_unlock_irqrestore(&data->lock, flags);
+ return 0;
+}
+
+/* Translate a single tile*/
+static int picolcd_fb_update_tile(u8 *vbitmap, const u8 *bitmap, int bpp,
+ int chip, int tile)
+{
+ int i, b, changed = 0;
+ u8 tdata[64];
+ u8 *vdata = vbitmap + (tile * 4 + chip) * 64;
+
+ if (bpp == 1) {
+ for (b = 7; b >= 0; b--) {
+ const u8 *bdata = bitmap + tile * 256 + chip * 8 + b * 32;
+ for (i = 0; i < 64; i++) {
+ tdata[i] <<= 1;
+ tdata[i] |= (bdata[i/8] >> (7 - i % 8)) & 0x01;
+ }
+ }
+ } else if (bpp == 8) {
+ for (b = 7; b >= 0; b--) {
+ const u8 *bdata = bitmap + (tile * 256 + chip * 8 + b * 32) * 8;
+ for (i = 0; i < 64; i++) {
+ tdata[i] <<= 1;
+ tdata[i] |= (bdata[i] & 0x80) ? 0x01 : 0x00;
+ }
+ }
+ } else {
+ /* Oops, we should never get here! */
+ WARN_ON(1);
+ return 0;
+ }
+
+ for (i = 0; i < 64; i++)
+ if (tdata[i] != vdata[i]) {
+ changed = 1;
+ vdata[i] = tdata[i];
+ }
+ return changed;
+}
+
+/* Reconfigure LCD display */
+static int picolcd_fb_reset(struct picolcd_data *data, int clear)
+{
+ struct hid_report *report = picolcd_out_report(REPORT_LCD_CMD, data->hdev);
+ int i, j;
+ unsigned long flags;
+ static const u8 mapcmd[8] = { 0x00, 0x02, 0x00, 0x64, 0x3f, 0x00, 0x64, 0xc0 };
+
+ if (!report || report->maxfield != 1)
+ return -ENODEV;
+
+ spin_lock_irqsave(&data->lock, flags);
+ for (i = 0; i < 4; i++) {
+ for (j = 0; j < report->field[0]->maxusage; j++)
+ if (j == 0)
+ hid_set_field(report->field[0], j, i << 2);
+ else if (j < sizeof(mapcmd))
+ hid_set_field(report->field[0], j, mapcmd[j]);
+ else
+ hid_set_field(report->field[0], j, 0);
+ usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
+ }
+
+ data->status |= PICOLCD_READY_FB;
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ if (data->fb_bitmap) {
+ if (clear) {
+ memset(data->fb_vbitmap, 0xff, PICOLCDFB_SIZE);
+ memset(data->fb_bitmap, 0, PICOLCDFB_SIZE*data->fb_bpp);
+ } else {
+ /* invert 1 byte in each tile to force resend */
+ for (i = 0; i < PICOLCDFB_SIZE; i += 64)
+ data->fb_vbitmap[i] = ~data->fb_vbitmap[i];
+ }
+ }
+
+ /* schedule first output of framebuffer */
+ if (data->fb_info)
+ schedule_delayed_work(&data->fb_info->deferred_work, 0);
+
+ return 0;
+}
+
+/* Update fb_vbitmap from the screen_base and send changed tiles to device */
+static void picolcd_fb_update(struct picolcd_data *data)
+{
+ int chip, tile, n;
+ unsigned long flags;
+
+ spin_lock_irqsave(&data->lock, flags);
+ if (!(data->status & PICOLCD_READY_FB)) {
+ spin_unlock_irqrestore(&data->lock, flags);
+ picolcd_fb_reset(data, 0);
+ } else {
+ spin_unlock_irqrestore(&data->lock, flags);
+ }
+
+ /*
+ * Translate the framebuffer into the format needed by the PicoLCD.
+ * See display layout above.
+ * Do this one tile after the other and push those tiles that changed.
+ *
+ * Wait for our IO to complete as otherwise we might flood the queue!
+ */
+ n = 0;
+ for (chip = 0; chip < 4; chip++)
+ for (tile = 0; tile < 8; tile++)
+ if (picolcd_fb_update_tile(data->fb_vbitmap,
+ data->fb_bitmap, data->fb_bpp, chip, tile)) {
+ n += 2;
+ if (n >= HID_OUTPUT_FIFO_SIZE / 2) {
+ usbhid_wait_io(data->hdev);
+ n = 0;
+ }
+ picolcd_fb_send_tile(data->hdev, chip, tile);
+ }
+ if (n)
+ usbhid_wait_io(data->hdev);
+}
+
+/* Stub to call the system default and update the image on the picoLCD */
+static void picolcd_fb_fillrect(struct fb_info *info,
+ const struct fb_fillrect *rect)
+{
+ if (!info->par)
+ return;
+ sys_fillrect(info, rect);
+
+ schedule_delayed_work(&info->deferred_work, 0);
+}
+
+/* Stub to call the system default and update the image on the picoLCD */
+static void picolcd_fb_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area)
+{
+ if (!info->par)
+ return;
+ sys_copyarea(info, area);
+
+ schedule_delayed_work(&info->deferred_work, 0);
+}
+
+/* Stub to call the system default and update the image on the picoLCD */
+static void picolcd_fb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+ if (!info->par)
+ return;
+ sys_imageblit(info, image);
+
+ schedule_delayed_work(&info->deferred_work, 0);
+}
+
+/*
+ * this is the slow path from userspace. they can seek and write to
+ * the fb. it's inefficient to do anything less than a full screen draw
+ */
+static ssize_t picolcd_fb_write(struct fb_info *info, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ ssize_t ret;
+ if (!info->par)
+ return -ENODEV;
+ ret = fb_sys_write(info, buf, count, ppos);
+ if (ret >= 0)
+ schedule_delayed_work(&info->deferred_work, 0);
+ return ret;
+}
+
+static int picolcd_fb_blank(int blank, struct fb_info *info)
+{
+ if (!info->par)
+ return -ENODEV;
+ /* We let fb notification do this for us via lcd/backlight device */
+ return 0;
+}
+
+static void picolcd_fb_destroy(struct fb_info *info)
+{
+ struct picolcd_data *data = info->par;
+ info->par = NULL;
+ if (data)
+ data->fb_info = NULL;
+ fb_deferred_io_cleanup(info);
+ framebuffer_release(info);
+}
+
+static int picolcd_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ __u32 bpp = var->bits_per_pixel;
+ __u32 activate = var->activate;
+
+ /* only allow 1/8 bit depth (8-bit is grayscale) */
+ *var = picolcdfb_var;
+ var->activate = activate;
+ if (bpp >= 8)
+ var->bits_per_pixel = 8;
+ else
+ var->bits_per_pixel = 1;
+ return 0;
+}
+
+static int picolcd_set_par(struct fb_info *info)
+{
+ struct picolcd_data *data = info->par;
+ u8 *o_fb, *n_fb;
+ if (info->var.bits_per_pixel == data->fb_bpp)
+ return 0;
+ /* switch between 1/8 bit depths */
+ if (info->var.bits_per_pixel != 1 && info->var.bits_per_pixel != 8)
+ return -EINVAL;
+
+ o_fb = data->fb_bitmap;
+ n_fb = vmalloc(PICOLCDFB_SIZE*info->var.bits_per_pixel);
+ if (!n_fb)
+ return -ENOMEM;
+
+ fb_deferred_io_cleanup(info);
+ /* translate FB content to new bits-per-pixel */
+ if (info->var.bits_per_pixel == 1) {
+ int i, b;
+ for (i = 0; i < PICOLCDFB_SIZE; i++) {
+ u8 p = 0;
+ for (b = 0; b < 8; b++) {
+ p <<= 1;
+ p |= o_fb[i*8+b] ? 0x01 : 0x00;
+ }
+ }
+ info->fix.visual = FB_VISUAL_MONO01;
+ info->fix.line_length = PICOLCDFB_WIDTH / 8;
+ } else {
+ int i;
+ for (i = 0; i < PICOLCDFB_SIZE * 8; i++)
+ n_fb[i] = o_fb[i/8] & (0x01 << (7 - i % 8)) ? 0xff : 0x00;
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ info->fix.line_length = PICOLCDFB_WIDTH;
+ }
+
+ data->fb_bitmap = n_fb;
+ data->fb_bpp = info->var.bits_per_pixel;
+ info->screen_base = (char __force __iomem *)n_fb;
+ info->fix.smem_start = (unsigned long)n_fb;
+ info->fix.smem_len = PICOLCDFB_SIZE*data->fb_bpp;
+ fb_deferred_io_init(info);
+ vfree(o_fb);
+ return 0;
+}
+
+/* Note this can't be const because of struct fb_info definition */
+static struct fb_ops picolcdfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_destroy = picolcd_fb_destroy,
+ .fb_read = fb_sys_read,
+ .fb_write = picolcd_fb_write,
+ .fb_blank = picolcd_fb_blank,
+ .fb_fillrect = picolcd_fb_fillrect,
+ .fb_copyarea = picolcd_fb_copyarea,
+ .fb_imageblit = picolcd_fb_imageblit,
+ .fb_check_var = picolcd_fb_check_var,
+ .fb_set_par = picolcd_set_par,
+};
+
+
+/* Callback from deferred IO workqueue */
+static void picolcd_fb_deferred_io(struct fb_info *info, struct list_head *pagelist)
+{
+ picolcd_fb_update(info->par);
+}
+
+static const struct fb_deferred_io picolcd_fb_defio = {
+ .delay = HZ / PICOLCDFB_UPDATE_RATE_DEFAULT,
+ .deferred_io = picolcd_fb_deferred_io,
+};
+
+
+/*
+ * The "fb_update_rate" sysfs attribute
+ */
+static ssize_t picolcd_fb_update_rate_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct picolcd_data *data = dev_get_drvdata(dev);
+ unsigned i, fb_update_rate = data->fb_update_rate;
+ size_t ret = 0;
+
+ for (i = 1; i <= PICOLCDFB_UPDATE_RATE_LIMIT; i++)
+ if (ret >= PAGE_SIZE)
+ break;
+ else if (i == fb_update_rate)
+ ret += snprintf(buf+ret, PAGE_SIZE-ret, "[%u] ", i);
+ else
+ ret += snprintf(buf+ret, PAGE_SIZE-ret, "%u ", i);
+ if (ret > 0)
+ buf[min(ret, (size_t)PAGE_SIZE)-1] = '\n';
+ return ret;
+}
+
+static ssize_t picolcd_fb_update_rate_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct picolcd_data *data = dev_get_drvdata(dev);
+ int i;
+ unsigned u;
+
+ if (count < 1 || count > 10)
+ return -EINVAL;
+
+ i = sscanf(buf, "%u", &u);
+ if (i != 1)
+ return -EINVAL;
+
+ if (u > PICOLCDFB_UPDATE_RATE_LIMIT)
+ return -ERANGE;
+ else if (u == 0)
+ u = PICOLCDFB_UPDATE_RATE_DEFAULT;
+
+ data->fb_update_rate = u;
+ data->fb_defio.delay = HZ / data->fb_update_rate;
+ return count;
+}
+
+static DEVICE_ATTR(fb_update_rate, 0666, picolcd_fb_update_rate_show,
+ picolcd_fb_update_rate_store);
+
+/* initialize Framebuffer device */
+static int picolcd_init_framebuffer(struct picolcd_data *data)
+{
+ struct device *dev = &data->hdev->dev;
+ struct fb_info *info = NULL;
+ int error = -ENOMEM;
+ u8 *fb_vbitmap = NULL;
+ u8 *fb_bitmap = NULL;
+
+ fb_bitmap = vmalloc(PICOLCDFB_SIZE*picolcdfb_var.bits_per_pixel);
+ if (fb_bitmap == NULL) {
+ dev_err(dev, "can't get a free page for framebuffer\n");
+ goto err_nomem;
+ }
+
+ fb_vbitmap = kmalloc(PICOLCDFB_SIZE, GFP_KERNEL);
+ if (fb_vbitmap == NULL) {
+ dev_err(dev, "can't alloc vbitmap image buffer\n");
+ goto err_nomem;
+ }
+
+ data->fb_update_rate = PICOLCDFB_UPDATE_RATE_DEFAULT;
+ data->fb_defio = picolcd_fb_defio;
+ info = framebuffer_alloc(0, dev);
+ if (info == NULL) {
+ dev_err(dev, "failed to allocate a framebuffer\n");
+ goto err_nomem;
+ }
+
+ info->fbdefio = &data->fb_defio;
+ info->screen_base = (char __force __iomem *)fb_bitmap;
+ info->fbops = &picolcdfb_ops;
+ info->var = picolcdfb_var;
+ info->fix = picolcdfb_fix;
+ info->fix.smem_len = PICOLCDFB_SIZE;
+ info->fix.smem_start = (unsigned long)fb_bitmap;
+ info->par = data;
+ info->flags = FBINFO_FLAG_DEFAULT;
+
+ data->fb_vbitmap = fb_vbitmap;
+ data->fb_bitmap = fb_bitmap;
+ data->fb_bpp = picolcdfb_var.bits_per_pixel;
+ error = picolcd_fb_reset(data, 1);
+ if (error) {
+ dev_err(dev, "failed to configure display\n");
+ goto err_cleanup;
+ }
+ error = device_create_file(dev, &dev_attr_fb_update_rate);
+ if (error) {
+ dev_err(dev, "failed to create sysfs attributes\n");
+ goto err_cleanup;
+ }
+ data->fb_info = info;
+ error = register_framebuffer(info);
+ if (error) {
+ dev_err(dev, "failed to register framebuffer\n");
+ goto err_sysfs;
+ }
+ fb_deferred_io_init(info);
+ /* schedule first output of framebuffer */
+ schedule_delayed_work(&info->deferred_work, 0);
+ return 0;
+
+err_sysfs:
+ device_remove_file(dev, &dev_attr_fb_update_rate);
+err_cleanup:
+ data->fb_vbitmap = NULL;
+ data->fb_bitmap = NULL;
+ data->fb_bpp = 0;
+ data->fb_info = NULL;
+
+err_nomem:
+ framebuffer_release(info);
+ vfree(fb_bitmap);
+ kfree(fb_vbitmap);
+ return error;
+}
+
+static void picolcd_exit_framebuffer(struct picolcd_data *data)
+{
+ struct fb_info *info = data->fb_info;
+ u8 *fb_vbitmap = data->fb_vbitmap;
+ u8 *fb_bitmap = data->fb_bitmap;
+
+ if (!info)
+ return;
+
+ data->fb_vbitmap = NULL;
+ data->fb_bitmap = NULL;
+ data->fb_bpp = 0;
+ data->fb_info = NULL;
+ device_remove_file(&data->hdev->dev, &dev_attr_fb_update_rate);
+ fb_deferred_io_cleanup(info);
+ unregister_framebuffer(info);
+ vfree(fb_bitmap);
+ kfree(fb_vbitmap);
+}
+
+#define picolcd_fbinfo(d) ((d)->fb_info)
+#else
+static inline int picolcd_fb_reset(struct picolcd_data *data, int clear)
+{
+ return 0;
+}
+static inline int picolcd_init_framebuffer(struct picolcd_data *data)
+{
+ return 0;
+}
+static inline void picolcd_exit_framebuffer(struct picolcd_data *data)
+{
+}
+#define picolcd_fbinfo(d) NULL
+#endif /* CONFIG_HID_PICOLCD_FB */
+
+#ifdef CONFIG_HID_PICOLCD_BACKLIGHT
+/*
+ * backlight class device
+ */
+static int picolcd_get_brightness(struct backlight_device *bdev)
+{
+ struct picolcd_data *data = bl_get_data(bdev);
+ return data->lcd_brightness;
+}
+
+static int picolcd_set_brightness(struct backlight_device *bdev)
+{
+ struct picolcd_data *data = bl_get_data(bdev);
+ struct hid_report *report = picolcd_out_report(REPORT_BRIGHTNESS, data->hdev);
+ unsigned long flags;
+
+ if (!report || report->maxfield != 1 || report->field[0]->report_count != 1)
+ return -ENODEV;
+
+ data->lcd_brightness = bdev->props.brightness & 0x0ff;
+ data->lcd_power = bdev->props.power;
+ spin_lock_irqsave(&data->lock, flags);
+ hid_set_field(report->field[0], 0, data->lcd_power == FB_BLANK_UNBLANK ? data->lcd_brightness : 0);
+ usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
+ spin_unlock_irqrestore(&data->lock, flags);
+ return 0;
+}
+
+static int picolcd_check_bl_fb(struct backlight_device *bdev, struct fb_info *fb)
+{
+ return fb && fb == picolcd_fbinfo((struct picolcd_data *)bl_get_data(bdev));
+}
+
+static const struct backlight_ops picolcd_blops = {
+ .update_status = picolcd_set_brightness,
+ .get_brightness = picolcd_get_brightness,
+ .check_fb = picolcd_check_bl_fb,
+};
+
+static int picolcd_init_backlight(struct picolcd_data *data, struct hid_report *report)
+{
+ struct device *dev = &data->hdev->dev;
+ struct backlight_device *bdev;
+ struct backlight_properties props;
+ if (!report)
+ return -ENODEV;
+ if (report->maxfield != 1 || report->field[0]->report_count != 1 ||
+ report->field[0]->report_size != 8) {
+ dev_err(dev, "unsupported BRIGHTNESS report");
+ return -EINVAL;
+ }
+
+ memset(&props, 0, sizeof(props));
+ props.max_brightness = 0xff;
+ bdev = backlight_device_register(dev_name(dev), dev, data,
+ &picolcd_blops, &props);
+ if (IS_ERR(bdev)) {
+ dev_err(dev, "failed to register backlight\n");
+ return PTR_ERR(bdev);
+ }
+ bdev->props.brightness = 0xff;
+ data->lcd_brightness = 0xff;
+ data->backlight = bdev;
+ picolcd_set_brightness(bdev);
+ return 0;
+}
+
+static void picolcd_exit_backlight(struct picolcd_data *data)
+{
+ struct backlight_device *bdev = data->backlight;
+
+ data->backlight = NULL;
+ if (bdev)
+ backlight_device_unregister(bdev);
+}
+
+static inline int picolcd_resume_backlight(struct picolcd_data *data)
+{
+ if (!data->backlight)
+ return 0;
+ return picolcd_set_brightness(data->backlight);
+}
+
+#ifdef CONFIG_PM
+static void picolcd_suspend_backlight(struct picolcd_data *data)
+{
+ int bl_power = data->lcd_power;
+ if (!data->backlight)
+ return;
+
+ data->backlight->props.power = FB_BLANK_POWERDOWN;
+ picolcd_set_brightness(data->backlight);
+ data->lcd_power = data->backlight->props.power = bl_power;
+}
+#endif /* CONFIG_PM */
+#else
+static inline int picolcd_init_backlight(struct picolcd_data *data,
+ struct hid_report *report)
+{
+ return 0;
+}
+static inline void picolcd_exit_backlight(struct picolcd_data *data)
+{
+}
+static inline int picolcd_resume_backlight(struct picolcd_data *data)
+{
+ return 0;
+}
+static inline void picolcd_suspend_backlight(struct picolcd_data *data)
+{
+}
+#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */
+
+#ifdef CONFIG_HID_PICOLCD_LCD
+/*
+ * lcd class device
+ */
+static int picolcd_get_contrast(struct lcd_device *ldev)
+{
+ struct picolcd_data *data = lcd_get_data(ldev);
+ return data->lcd_contrast;
+}
+
+static int picolcd_set_contrast(struct lcd_device *ldev, int contrast)
+{
+ struct picolcd_data *data = lcd_get_data(ldev);
+ struct hid_report *report = picolcd_out_report(REPORT_CONTRAST, data->hdev);
+ unsigned long flags;
+
+ if (!report || report->maxfield != 1 || report->field[0]->report_count != 1)
+ return -ENODEV;
+
+ data->lcd_contrast = contrast & 0x0ff;
+ spin_lock_irqsave(&data->lock, flags);
+ hid_set_field(report->field[0], 0, data->lcd_contrast);
+ usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
+ spin_unlock_irqrestore(&data->lock, flags);
+ return 0;
+}
+
+static int picolcd_check_lcd_fb(struct lcd_device *ldev, struct fb_info *fb)
+{
+ return fb && fb == picolcd_fbinfo((struct picolcd_data *)lcd_get_data(ldev));
+}
+
+static struct lcd_ops picolcd_lcdops = {
+ .get_contrast = picolcd_get_contrast,
+ .set_contrast = picolcd_set_contrast,
+ .check_fb = picolcd_check_lcd_fb,
+};
+
+static int picolcd_init_lcd(struct picolcd_data *data, struct hid_report *report)
+{
+ struct device *dev = &data->hdev->dev;
+ struct lcd_device *ldev;
+
+ if (!report)
+ return -ENODEV;
+ if (report->maxfield != 1 || report->field[0]->report_count != 1 ||
+ report->field[0]->report_size != 8) {
+ dev_err(dev, "unsupported CONTRAST report");
+ return -EINVAL;
+ }
+
+ ldev = lcd_device_register(dev_name(dev), dev, data, &picolcd_lcdops);
+ if (IS_ERR(ldev)) {
+ dev_err(dev, "failed to register LCD\n");
+ return PTR_ERR(ldev);
+ }
+ ldev->props.max_contrast = 0x0ff;
+ data->lcd_contrast = 0xe5;
+ data->lcd = ldev;
+ picolcd_set_contrast(ldev, 0xe5);
+ return 0;
+}
+
+static void picolcd_exit_lcd(struct picolcd_data *data)
+{
+ struct lcd_device *ldev = data->lcd;
+
+ data->lcd = NULL;
+ if (ldev)
+ lcd_device_unregister(ldev);
+}
+
+static inline int picolcd_resume_lcd(struct picolcd_data *data)
+{
+ if (!data->lcd)
+ return 0;
+ return picolcd_set_contrast(data->lcd, data->lcd_contrast);
+}
+#else
+static inline int picolcd_init_lcd(struct picolcd_data *data,
+ struct hid_report *report)
+{
+ return 0;
+}
+static inline void picolcd_exit_lcd(struct picolcd_data *data)
+{
+}
+static inline int picolcd_resume_lcd(struct picolcd_data *data)
+{
+ return 0;
+}
+#endif /* CONFIG_HID_PICOLCD_LCD */
+
+#ifdef CONFIG_HID_PICOLCD_LEDS
+/**
+ * LED class device
+ */
+static void picolcd_leds_set(struct picolcd_data *data)
+{
+ struct hid_report *report;
+ unsigned long flags;
+
+ if (!data->led[0])
+ return;
+ report = picolcd_out_report(REPORT_LED_STATE, data->hdev);
+ if (!report || report->maxfield != 1 || report->field[0]->report_count != 1)
+ return;
+
+ spin_lock_irqsave(&data->lock, flags);
+ hid_set_field(report->field[0], 0, data->led_state);
+ usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
+ spin_unlock_irqrestore(&data->lock, flags);
+}
+
+static void picolcd_led_set_brightness(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct device *dev;
+ struct hid_device *hdev;
+ struct picolcd_data *data;
+ int i, state = 0;
+
+ dev = led_cdev->dev->parent;
+ hdev = container_of(dev, struct hid_device, dev);
+ data = hid_get_drvdata(hdev);
+ for (i = 0; i < 8; i++) {
+ if (led_cdev != data->led[i])
+ continue;
+ state = (data->led_state >> i) & 1;
+ if (value == LED_OFF && state) {
+ data->led_state &= ~(1 << i);
+ picolcd_leds_set(data);
+ } else if (value != LED_OFF && !state) {
+ data->led_state |= 1 << i;
+ picolcd_leds_set(data);
+ }
+ break;
+ }
+}
+
+static enum led_brightness picolcd_led_get_brightness(struct led_classdev *led_cdev)
+{
+ struct device *dev;
+ struct hid_device *hdev;
+ struct picolcd_data *data;
+ int i, value = 0;
+
+ dev = led_cdev->dev->parent;
+ hdev = container_of(dev, struct hid_device, dev);
+ data = hid_get_drvdata(hdev);
+ for (i = 0; i < 8; i++)
+ if (led_cdev == data->led[i]) {
+ value = (data->led_state >> i) & 1;
+ break;
+ }
+ return value ? LED_FULL : LED_OFF;
+}
+
+static int picolcd_init_leds(struct picolcd_data *data, struct hid_report *report)
+{
+ struct device *dev = &data->hdev->dev;
+ struct led_classdev *led;
+ size_t name_sz = strlen(dev_name(dev)) + 8;
+ char *name;
+ int i, ret = 0;
+
+ if (!report)
+ return -ENODEV;
+ if (report->maxfield != 1 || report->field[0]->report_count != 1 ||
+ report->field[0]->report_size != 8) {
+ dev_err(dev, "unsupported LED_STATE report");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < 8; i++) {
+ led = kzalloc(sizeof(struct led_classdev)+name_sz, GFP_KERNEL);
+ if (!led) {
+ dev_err(dev, "can't allocate memory for LED %d\n", i);
+ ret = -ENOMEM;
+ goto err;
+ }
+ name = (void *)(&led[1]);
+ snprintf(name, name_sz, "%s::GPO%d", dev_name(dev), i);
+ led->name = name;
+ led->brightness = 0;
+ led->max_brightness = 1;
+ led->brightness_get = picolcd_led_get_brightness;
+ led->brightness_set = picolcd_led_set_brightness;
+
+ data->led[i] = led;
+ ret = led_classdev_register(dev, data->led[i]);
+ if (ret) {
+ data->led[i] = NULL;
+ kfree(led);
+ dev_err(dev, "can't register LED %d\n", i);
+ goto err;
+ }
+ }
+ return 0;
+err:
+ for (i = 0; i < 8; i++)
+ if (data->led[i]) {
+ led = data->led[i];
+ data->led[i] = NULL;
+ led_classdev_unregister(led);
+ kfree(led);
+ }
+ return ret;
+}
+
+static void picolcd_exit_leds(struct picolcd_data *data)
+{
+ struct led_classdev *led;
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ led = data->led[i];
+ data->led[i] = NULL;
+ if (!led)
+ continue;
+ led_classdev_unregister(led);
+ kfree(led);
+ }
+}
+
+#else
+static inline int picolcd_init_leds(struct picolcd_data *data,
+ struct hid_report *report)
+{
+ return 0;
+}
+static inline void picolcd_exit_leds(struct picolcd_data *data)
+{
+}
+static inline int picolcd_leds_set(struct picolcd_data *data)
+{
+ return 0;
+}
+#endif /* CONFIG_HID_PICOLCD_LEDS */
+
+/*
+ * input class device
+ */
+static int picolcd_raw_keypad(struct picolcd_data *data,
+ struct hid_report *report, u8 *raw_data, int size)
+{
+ /*
+ * Keypad event
+ * First and second data bytes list currently pressed keys,
+ * 0x00 means no key and at most 2 keys may be pressed at same time
+ */
+ int i, j;
+
+ /* determine newly pressed keys */
+ for (i = 0; i < size; i++) {
+ unsigned int key_code;
+ if (raw_data[i] == 0)
+ continue;
+ for (j = 0; j < sizeof(data->pressed_keys); j++)
+ if (data->pressed_keys[j] == raw_data[i])
+ goto key_already_down;
+ for (j = 0; j < sizeof(data->pressed_keys); j++)
+ if (data->pressed_keys[j] == 0) {
+ data->pressed_keys[j] = raw_data[i];
+ break;
+ }
+ input_event(data->input_keys, EV_MSC, MSC_SCAN, raw_data[i]);
+ if (raw_data[i] < PICOLCD_KEYS)
+ key_code = data->keycode[raw_data[i]];
+ else
+ key_code = KEY_UNKNOWN;
+ if (key_code != KEY_UNKNOWN) {
+ dbg_hid(PICOLCD_NAME " got key press for %u:%d",
+ raw_data[i], key_code);
+ input_report_key(data->input_keys, key_code, 1);
+ }
+ input_sync(data->input_keys);
+key_already_down:
+ continue;
+ }
+
+ /* determine newly released keys */
+ for (j = 0; j < sizeof(data->pressed_keys); j++) {
+ unsigned int key_code;
+ if (data->pressed_keys[j] == 0)
+ continue;
+ for (i = 0; i < size; i++)
+ if (data->pressed_keys[j] == raw_data[i])
+ goto key_still_down;
+ input_event(data->input_keys, EV_MSC, MSC_SCAN, data->pressed_keys[j]);
+ if (data->pressed_keys[j] < PICOLCD_KEYS)
+ key_code = data->keycode[data->pressed_keys[j]];
+ else
+ key_code = KEY_UNKNOWN;
+ if (key_code != KEY_UNKNOWN) {
+ dbg_hid(PICOLCD_NAME " got key release for %u:%d",
+ data->pressed_keys[j], key_code);
+ input_report_key(data->input_keys, key_code, 0);
+ }
+ input_sync(data->input_keys);
+ data->pressed_keys[j] = 0;
+key_still_down:
+ continue;
+ }
+ return 1;
+}
+
+static int picolcd_raw_cir(struct picolcd_data *data,
+ struct hid_report *report, u8 *raw_data, int size)
+{
+ /* Need understanding of CIR data format to implement ... */
+ return 1;
+}
+
+static int picolcd_check_version(struct hid_device *hdev)
+{
+ struct picolcd_data *data = hid_get_drvdata(hdev);
+ struct picolcd_pending *verinfo;
+ int ret = 0;
+
+ if (!data)
+ return -ENODEV;
+
+ verinfo = picolcd_send_and_wait(hdev, REPORT_VERSION, NULL, 0);
+ if (!verinfo) {
+ dev_err(&hdev->dev, "no version response from PicoLCD");
+ return -ENODEV;
+ }
+
+ if (verinfo->raw_size == 2) {
+ data->version[0] = verinfo->raw_data[1];
+ data->version[1] = verinfo->raw_data[0];
+ if (data->status & PICOLCD_BOOTLOADER) {
+ dev_info(&hdev->dev, "PicoLCD, bootloader version %d.%d\n",
+ verinfo->raw_data[1], verinfo->raw_data[0]);
+ } else {
+ dev_info(&hdev->dev, "PicoLCD, firmware version %d.%d\n",
+ verinfo->raw_data[1], verinfo->raw_data[0]);
+ }
+ } else {
+ dev_err(&hdev->dev, "confused, got unexpected version response from PicoLCD\n");
+ ret = -EINVAL;
+ }
+ kfree(verinfo);
+ return ret;
+}
+
+/*
+ * Reset our device and wait for answer to VERSION request
+ */
+static int picolcd_reset(struct hid_device *hdev)
+{
+ struct picolcd_data *data = hid_get_drvdata(hdev);
+ struct hid_report *report = picolcd_out_report(REPORT_RESET, hdev);
+ unsigned long flags;
+ int error;
+
+ if (!data || !report || report->maxfield != 1)
+ return -ENODEV;
+
+ spin_lock_irqsave(&data->lock, flags);
+ if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER)
+ data->status |= PICOLCD_BOOTLOADER;
+
+ /* perform the reset */
+ hid_set_field(report->field[0], 0, 1);
+ usbhid_submit_report(hdev, report, USB_DIR_OUT);
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ error = picolcd_check_version(hdev);
+ if (error)
+ return error;
+
+ picolcd_resume_lcd(data);
+ picolcd_resume_backlight(data);
+#ifdef CONFIG_HID_PICOLCD_FB
+ if (data->fb_info)
+ schedule_delayed_work(&data->fb_info->deferred_work, 0);
+#endif /* CONFIG_HID_PICOLCD_FB */
+
+ picolcd_leds_set(data);
+ return 0;
+}
+
+/*
+ * The "operation_mode" sysfs attribute
+ */
+static ssize_t picolcd_operation_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct picolcd_data *data = dev_get_drvdata(dev);
+
+ if (data->status & PICOLCD_BOOTLOADER)
+ return snprintf(buf, PAGE_SIZE, "[bootloader] lcd\n");
+ else
+ return snprintf(buf, PAGE_SIZE, "bootloader [lcd]\n");
+}
+
+static ssize_t picolcd_operation_mode_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct picolcd_data *data = dev_get_drvdata(dev);
+ struct hid_report *report = NULL;
+ size_t cnt = count;
+ int timeout = data->opmode_delay;
+ unsigned long flags;
+
+ if (cnt >= 3 && strncmp("lcd", buf, 3) == 0) {
+ if (data->status & PICOLCD_BOOTLOADER)
+ report = picolcd_out_report(REPORT_EXIT_FLASHER, data->hdev);
+ buf += 3;
+ cnt -= 3;
+ } else if (cnt >= 10 && strncmp("bootloader", buf, 10) == 0) {
+ if (!(data->status & PICOLCD_BOOTLOADER))
+ report = picolcd_out_report(REPORT_EXIT_KEYBOARD, data->hdev);
+ buf += 10;
+ cnt -= 10;
+ }
+ if (!report)
+ return -EINVAL;
+
+ while (cnt > 0 && (buf[cnt-1] == '\n' || buf[cnt-1] == '\r'))
+ cnt--;
+ if (cnt != 0)
+ return -EINVAL;
+
+ spin_lock_irqsave(&data->lock, flags);
+ hid_set_field(report->field[0], 0, timeout & 0xff);
+ hid_set_field(report->field[0], 1, (timeout >> 8) & 0xff);
+ usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
+ spin_unlock_irqrestore(&data->lock, flags);
+ return count;
+}
+
+static DEVICE_ATTR(operation_mode, 0644, picolcd_operation_mode_show,
+ picolcd_operation_mode_store);
+
+/*
+ * The "operation_mode_delay" sysfs attribute
+ */
+static ssize_t picolcd_operation_mode_delay_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct picolcd_data *data = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%hu\n", data->opmode_delay);
+}
+
+static ssize_t picolcd_operation_mode_delay_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct picolcd_data *data = dev_get_drvdata(dev);
+ unsigned u;
+ if (sscanf(buf, "%u", &u) != 1)
+ return -EINVAL;
+ if (u > 30000)
+ return -EINVAL;
+ else
+ data->opmode_delay = u;
+ return count;
+}
+
+static DEVICE_ATTR(operation_mode_delay, 0644, picolcd_operation_mode_delay_show,
+ picolcd_operation_mode_delay_store);
+
+
+#ifdef CONFIG_DEBUG_FS
+/*
+ * The "reset" file
+ */
+static int picolcd_debug_reset_show(struct seq_file *f, void *p)
+{
+ if (picolcd_fbinfo((struct picolcd_data *)f->private))
+ seq_printf(f, "all fb\n");
+ else
+ seq_printf(f, "all\n");
+ return 0;
+}
+
+static int picolcd_debug_reset_open(struct inode *inode, struct file *f)
+{
+ return single_open(f, picolcd_debug_reset_show, inode->i_private);
+}
+
+static ssize_t picolcd_debug_reset_write(struct file *f, const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct picolcd_data *data = ((struct seq_file *)f->private_data)->private;
+ char buf[32];
+ size_t cnt = min(count, sizeof(buf)-1);
+ if (copy_from_user(buf, user_buf, cnt))
+ return -EFAULT;
+
+ while (cnt > 0 && (buf[cnt-1] == ' ' || buf[cnt-1] == '\n'))
+ cnt--;
+ buf[cnt] = '\0';
+ if (strcmp(buf, "all") == 0) {
+ picolcd_reset(data->hdev);
+ picolcd_fb_reset(data, 1);
+ } else if (strcmp(buf, "fb") == 0) {
+ picolcd_fb_reset(data, 1);
+ } else {
+ return -EINVAL;
+ }
+ return count;
+}
+
+static const struct file_operations picolcd_debug_reset_fops = {
+ .owner = THIS_MODULE,
+ .open = picolcd_debug_reset_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .write = picolcd_debug_reset_write,
+ .release = single_release,
+};
+
+/*
+ * The "eeprom" file
+ */
+static int picolcd_debug_eeprom_open(struct inode *i, struct file *f)
+{
+ f->private_data = i->i_private;
+ return 0;
+}
+
+static ssize_t picolcd_debug_eeprom_read(struct file *f, char __user *u,
+ size_t s, loff_t *off)
+{
+ struct picolcd_data *data = f->private_data;
+ struct picolcd_pending *resp;
+ u8 raw_data[3];
+ ssize_t ret = -EIO;
+
+ if (s == 0)
+ return -EINVAL;
+ if (*off > 0x0ff)
+ return 0;
+
+ /* prepare buffer with info about what we want to read (addr & len) */
+ raw_data[0] = *off & 0xff;
+ raw_data[1] = (*off >> 8) && 0xff;
+ raw_data[2] = s < 20 ? s : 20;
+ if (*off + raw_data[2] > 0xff)
+ raw_data[2] = 0x100 - *off;
+ resp = picolcd_send_and_wait(data->hdev, REPORT_EE_READ, raw_data,
+ sizeof(raw_data));
+ if (!resp)
+ return -EIO;
+
+ if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) {
+ /* successful read :) */
+ ret = resp->raw_data[2];
+ if (ret > s)
+ ret = s;
+ if (copy_to_user(u, resp->raw_data+3, ret))
+ ret = -EFAULT;
+ else
+ *off += ret;
+ } /* anything else is some kind of IO error */
+
+ kfree(resp);
+ return ret;
+}
+
+static ssize_t picolcd_debug_eeprom_write(struct file *f, const char __user *u,
+ size_t s, loff_t *off)
+{
+ struct picolcd_data *data = f->private_data;
+ struct picolcd_pending *resp;
+ ssize_t ret = -EIO;
+ u8 raw_data[23];
+
+ if (s == 0)
+ return -EINVAL;
+ if (*off > 0x0ff)
+ return -ENOSPC;
+
+ memset(raw_data, 0, sizeof(raw_data));
+ raw_data[0] = *off & 0xff;
+ raw_data[1] = (*off >> 8) && 0xff;
+ raw_data[2] = s < 20 ? s : 20;
+ if (*off + raw_data[2] > 0xff)
+ raw_data[2] = 0x100 - *off;
+
+ if (copy_from_user(raw_data+3, u, raw_data[2]))
+ return -EFAULT;
+ resp = picolcd_send_and_wait(data->hdev, REPORT_EE_WRITE, raw_data,
+ sizeof(raw_data));
+
+ if (!resp)
+ return -EIO;
+
+ if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) {
+ /* check if written data matches */
+ if (memcmp(raw_data, resp->raw_data, 3+raw_data[2]) == 0) {
+ *off += raw_data[2];
+ ret = raw_data[2];
+ }
+ }
+ kfree(resp);
+ return ret;
+}
+
+/*
+ * Notes:
+ * - read/write happens in chunks of at most 20 bytes, it's up to userspace
+ * to loop in order to get more data.
+ * - on write errors on otherwise correct write request the bytes
+ * that should have been written are in undefined state.
+ */
+static const struct file_operations picolcd_debug_eeprom_fops = {
+ .owner = THIS_MODULE,
+ .open = picolcd_debug_eeprom_open,
+ .read = picolcd_debug_eeprom_read,
+ .write = picolcd_debug_eeprom_write,
+ .llseek = generic_file_llseek,
+};
+
+/*
+ * The "flash" file
+ */
+static int picolcd_debug_flash_open(struct inode *i, struct file *f)
+{
+ f->private_data = i->i_private;
+ return 0;
+}
+
+/* record a flash address to buf (bounds check to be done by caller) */
+static int _picolcd_flash_setaddr(struct picolcd_data *data, u8 *buf, long off)
+{
+ buf[0] = off & 0xff;
+ buf[1] = (off >> 8) & 0xff;
+ if (data->addr_sz == 3)
+ buf[2] = (off >> 16) & 0xff;
+ return data->addr_sz == 2 ? 2 : 3;
+}
+
+/* read a given size of data (bounds check to be done by caller) */
+static ssize_t _picolcd_flash_read(struct picolcd_data *data, int report_id,
+ char __user *u, size_t s, loff_t *off)
+{
+ struct picolcd_pending *resp;
+ u8 raw_data[4];
+ ssize_t ret = 0;
+ int len_off, err = -EIO;
+
+ while (s > 0) {
+ err = -EIO;
+ len_off = _picolcd_flash_setaddr(data, raw_data, *off);
+ raw_data[len_off] = s > 32 ? 32 : s;
+ resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off+1);
+ if (!resp || !resp->in_report)
+ goto skip;
+ if (resp->in_report->id == REPORT_MEMORY ||
+ resp->in_report->id == REPORT_BL_READ_MEMORY) {
+ if (memcmp(raw_data, resp->raw_data, len_off+1) != 0)
+ goto skip;
+ if (copy_to_user(u+ret, resp->raw_data+len_off+1, raw_data[len_off])) {
+ err = -EFAULT;
+ goto skip;
+ }
+ *off += raw_data[len_off];
+ s -= raw_data[len_off];
+ ret += raw_data[len_off];
+ err = 0;
+ }
+skip:
+ kfree(resp);
+ if (err)
+ return ret > 0 ? ret : err;
+ }
+ return ret;
+}
+
+static ssize_t picolcd_debug_flash_read(struct file *f, char __user *u,
+ size_t s, loff_t *off)
+{
+ struct picolcd_data *data = f->private_data;
+
+ if (s == 0)
+ return -EINVAL;
+ if (*off > 0x05fff)
+ return 0;
+ if (*off + s > 0x05fff)
+ s = 0x06000 - *off;
+
+ if (data->status & PICOLCD_BOOTLOADER)
+ return _picolcd_flash_read(data, REPORT_BL_READ_MEMORY, u, s, off);
+ else
+ return _picolcd_flash_read(data, REPORT_READ_MEMORY, u, s, off);
+}
+
+/* erase block aligned to 64bytes boundary */
+static ssize_t _picolcd_flash_erase64(struct picolcd_data *data, int report_id,
+ loff_t *off)
+{
+ struct picolcd_pending *resp;
+ u8 raw_data[3];
+ int len_off;
+ ssize_t ret = -EIO;
+
+ if (*off & 0x3f)
+ return -EINVAL;
+
+ len_off = _picolcd_flash_setaddr(data, raw_data, *off);
+ resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off);
+ if (!resp || !resp->in_report)
+ goto skip;
+ if (resp->in_report->id == REPORT_MEMORY ||
+ resp->in_report->id == REPORT_BL_ERASE_MEMORY) {
+ if (memcmp(raw_data, resp->raw_data, len_off) != 0)
+ goto skip;
+ ret = 0;
+ }
+skip:
+ kfree(resp);
+ return ret;
+}
+
+/* write a given size of data (bounds check to be done by caller) */
+static ssize_t _picolcd_flash_write(struct picolcd_data *data, int report_id,
+ const char __user *u, size_t s, loff_t *off)
+{
+ struct picolcd_pending *resp;
+ u8 raw_data[36];
+ ssize_t ret = 0;
+ int len_off, err = -EIO;
+
+ while (s > 0) {
+ err = -EIO;
+ len_off = _picolcd_flash_setaddr(data, raw_data, *off);
+ raw_data[len_off] = s > 32 ? 32 : s;
+ if (copy_from_user(raw_data+len_off+1, u, raw_data[len_off])) {
+ err = -EFAULT;
+ break;
+ }
+ resp = picolcd_send_and_wait(data->hdev, report_id, raw_data,
+ len_off+1+raw_data[len_off]);
+ if (!resp || !resp->in_report)
+ goto skip;
+ if (resp->in_report->id == REPORT_MEMORY ||
+ resp->in_report->id == REPORT_BL_WRITE_MEMORY) {
+ if (memcmp(raw_data, resp->raw_data, len_off+1+raw_data[len_off]) != 0)
+ goto skip;
+ *off += raw_data[len_off];
+ s -= raw_data[len_off];
+ ret += raw_data[len_off];
+ err = 0;
+ }
+skip:
+ kfree(resp);
+ if (err)
+ break;
+ }
+ return ret > 0 ? ret : err;
+}
+
+static ssize_t picolcd_debug_flash_write(struct file *f, const char __user *u,
+ size_t s, loff_t *off)
+{
+ struct picolcd_data *data = f->private_data;
+ ssize_t err, ret = 0;
+ int report_erase, report_write;
+
+ if (s == 0)
+ return -EINVAL;
+ if (*off > 0x5fff)
+ return -ENOSPC;
+ if (s & 0x3f)
+ return -EINVAL;
+ if (*off & 0x3f)
+ return -EINVAL;
+
+ if (data->status & PICOLCD_BOOTLOADER) {
+ report_erase = REPORT_BL_ERASE_MEMORY;
+ report_write = REPORT_BL_WRITE_MEMORY;
+ } else {
+ report_erase = REPORT_ERASE_MEMORY;
+ report_write = REPORT_WRITE_MEMORY;
+ }
+ mutex_lock(&data->mutex_flash);
+ while (s > 0) {
+ err = _picolcd_flash_erase64(data, report_erase, off);
+ if (err)
+ break;
+ err = _picolcd_flash_write(data, report_write, u, 64, off);
+ if (err < 0)
+ break;
+ ret += err;
+ *off += err;
+ s -= err;
+ if (err != 64)
+ break;
+ }
+ mutex_unlock(&data->mutex_flash);
+ return ret > 0 ? ret : err;
+}
+
+/*
+ * Notes:
+ * - concurrent writing is prevented by mutex and all writes must be
+ * n*64 bytes and 64-byte aligned, each write being preceeded by an
+ * ERASE which erases a 64byte block.
+ * If less than requested was written or an error is returned for an
+ * otherwise correct write request the next 64-byte block which should
+ * have been written is in undefined state (mostly: original, erased,
+ * (half-)written with write error)
+ * - reading can happend without special restriction
+ */
+static const struct file_operations picolcd_debug_flash_fops = {
+ .owner = THIS_MODULE,
+ .open = picolcd_debug_flash_open,
+ .read = picolcd_debug_flash_read,
+ .write = picolcd_debug_flash_write,
+ .llseek = generic_file_llseek,
+};
+
+
+/*
+ * Helper code for HID report level dumping/debugging
+ */
+static const char *error_codes[] = {
+ "success", "parameter missing", "data_missing", "block readonly",
+ "block not erasable", "block too big", "section overflow",
+ "invalid command length", "invalid data length",
+};
+
+static void dump_buff_as_hex(char *dst, size_t dst_sz, const u8 *data,
+ const size_t data_len)
+{
+ int i, j;
+ for (i = j = 0; i < data_len && j + 3 < dst_sz; i++) {
+ dst[j++] = hex_asc[(data[i] >> 4) & 0x0f];
+ dst[j++] = hex_asc[data[i] & 0x0f];
+ dst[j++] = ' ';
+ }
+ if (j < dst_sz) {
+ dst[j--] = '\0';
+ dst[j] = '\n';
+ } else
+ dst[j] = '\0';
+}
+
+static void picolcd_debug_out_report(struct picolcd_data *data,
+ struct hid_device *hdev, struct hid_report *report)
+{
+ u8 raw_data[70];
+ int raw_size = (report->size >> 3) + 1;
+ char *buff;
+#define BUFF_SZ 256
+
+ /* Avoid unnecessary overhead if debugfs is disabled */
+ if (!hdev->debug_events)
+ return;
+
+ buff = kmalloc(BUFF_SZ, GFP_ATOMIC);
+ if (!buff)
+ return;
+
+ snprintf(buff, BUFF_SZ, "\nout report %d (size %d) = ",
+ report->id, raw_size);
+ hid_debug_event(hdev, buff);
+ if (raw_size + 5 > sizeof(raw_data)) {
+ hid_debug_event(hdev, " TOO BIG\n");
+ return;
+ } else {
+ raw_data[0] = report->id;
+ hid_output_report(report, raw_data);
+ dump_buff_as_hex(buff, BUFF_SZ, raw_data, raw_size);
+ hid_debug_event(hdev, buff);
+ }
+
+ switch (report->id) {
+ case REPORT_LED_STATE:
+ /* 1 data byte with GPO state */
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_LED_STATE", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tGPO state: 0x%02x\n", raw_data[1]);
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_BRIGHTNESS:
+ /* 1 data byte with brightness */
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_BRIGHTNESS", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tBrightness: 0x%02x\n", raw_data[1]);
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_CONTRAST:
+ /* 1 data byte with contrast */
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_CONTRAST", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tContrast: 0x%02x\n", raw_data[1]);
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_RESET:
+ /* 2 data bytes with reset duration in ms */
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_RESET", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tDuration: 0x%02x%02x (%dms)\n",
+ raw_data[2], raw_data[1], raw_data[2] << 8 | raw_data[1]);
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_LCD_CMD:
+ /* 63 data bytes with LCD commands */
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_LCD_CMD", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ /* TODO: format decoding */
+ break;
+ case REPORT_LCD_DATA:
+ /* 63 data bytes with LCD data */
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_LCD_CMD", report->id, raw_size-1);
+ /* TODO: format decoding */
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_LCD_CMD_DATA:
+ /* 63 data bytes with LCD commands and data */
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_LCD_CMD", report->id, raw_size-1);
+ /* TODO: format decoding */
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_EE_READ:
+ /* 3 data bytes with read area description */
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_EE_READ", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
+ raw_data[2], raw_data[1]);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_EE_WRITE:
+ /* 3+1..20 data bytes with write area description */
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_EE_WRITE", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
+ raw_data[2], raw_data[1]);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
+ hid_debug_event(hdev, buff);
+ if (raw_data[3] == 0) {
+ snprintf(buff, BUFF_SZ, "\tNo data\n");
+ } else if (raw_data[3] + 4 <= raw_size) {
+ snprintf(buff, BUFF_SZ, "\tData: ");
+ hid_debug_event(hdev, buff);
+ dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]);
+ } else {
+ snprintf(buff, BUFF_SZ, "\tData overflowed\n");
+ }
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_ERASE_MEMORY:
+ case REPORT_BL_ERASE_MEMORY:
+ /* 3 data bytes with pointer inside erase block */
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_ERASE_MEMORY", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ switch (data->addr_sz) {
+ case 2:
+ snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x\n",
+ raw_data[2], raw_data[1]);
+ break;
+ case 3:
+ snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x%02x\n",
+ raw_data[3], raw_data[2], raw_data[1]);
+ break;
+ default:
+ snprintf(buff, BUFF_SZ, "\tNot supported\n");
+ }
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_READ_MEMORY:
+ case REPORT_BL_READ_MEMORY:
+ /* 4 data bytes with read area description */
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_READ_MEMORY", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ switch (data->addr_sz) {
+ case 2:
+ snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
+ raw_data[2], raw_data[1]);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
+ break;
+ case 3:
+ snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n",
+ raw_data[3], raw_data[2], raw_data[1]);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]);
+ break;
+ default:
+ snprintf(buff, BUFF_SZ, "\tNot supported\n");
+ }
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_WRITE_MEMORY:
+ case REPORT_BL_WRITE_MEMORY:
+ /* 4+1..32 data bytes with write adrea description */
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_WRITE_MEMORY", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ switch (data->addr_sz) {
+ case 2:
+ snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
+ raw_data[2], raw_data[1]);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
+ hid_debug_event(hdev, buff);
+ if (raw_data[3] == 0) {
+ snprintf(buff, BUFF_SZ, "\tNo data\n");
+ } else if (raw_data[3] + 4 <= raw_size) {
+ snprintf(buff, BUFF_SZ, "\tData: ");
+ hid_debug_event(hdev, buff);
+ dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]);
+ } else {
+ snprintf(buff, BUFF_SZ, "\tData overflowed\n");
+ }
+ break;
+ case 3:
+ snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n",
+ raw_data[3], raw_data[2], raw_data[1]);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]);
+ hid_debug_event(hdev, buff);
+ if (raw_data[4] == 0) {
+ snprintf(buff, BUFF_SZ, "\tNo data\n");
+ } else if (raw_data[4] + 5 <= raw_size) {
+ snprintf(buff, BUFF_SZ, "\tData: ");
+ hid_debug_event(hdev, buff);
+ dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]);
+ } else {
+ snprintf(buff, BUFF_SZ, "\tData overflowed\n");
+ }
+ break;
+ default:
+ snprintf(buff, BUFF_SZ, "\tNot supported\n");
+ }
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_SPLASH_RESTART:
+ /* TODO */
+ break;
+ case REPORT_EXIT_KEYBOARD:
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_EXIT_KEYBOARD", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n",
+ raw_data[1] | (raw_data[2] << 8),
+ raw_data[2], raw_data[1]);
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_VERSION:
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_VERSION", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_DEVID:
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_DEVID", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_SPLASH_SIZE:
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_SPLASH_SIZE", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_HOOK_VERSION:
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_HOOK_VERSION", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_EXIT_FLASHER:
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "REPORT_VERSION", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n",
+ raw_data[1] | (raw_data[2] << 8),
+ raw_data[2], raw_data[1]);
+ hid_debug_event(hdev, buff);
+ break;
+ default:
+ snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
+ "<unknown>", report->id, raw_size-1);
+ hid_debug_event(hdev, buff);
+ break;
+ }
+ wake_up_interruptible(&hdev->debug_wait);
+ kfree(buff);
+}
+
+static void picolcd_debug_raw_event(struct picolcd_data *data,
+ struct hid_device *hdev, struct hid_report *report,
+ u8 *raw_data, int size)
+{
+ char *buff;
+
+#define BUFF_SZ 256
+ /* Avoid unnecessary overhead if debugfs is disabled */
+ if (!hdev->debug_events)
+ return;
+
+ buff = kmalloc(BUFF_SZ, GFP_ATOMIC);
+ if (!buff)
+ return;
+
+ switch (report->id) {
+ case REPORT_ERROR_CODE:
+ /* 2 data bytes with affected report and error code */
+ snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
+ "REPORT_ERROR_CODE", report->id, size-1);
+ hid_debug_event(hdev, buff);
+ if (raw_data[2] < ARRAY_SIZE(error_codes))
+ snprintf(buff, BUFF_SZ, "\tError code 0x%02x (%s) in reply to report 0x%02x\n",
+ raw_data[2], error_codes[raw_data[2]], raw_data[1]);
+ else
+ snprintf(buff, BUFF_SZ, "\tError code 0x%02x in reply to report 0x%02x\n",
+ raw_data[2], raw_data[1]);
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_KEY_STATE:
+ /* 2 data bytes with key state */
+ snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
+ "REPORT_KEY_STATE", report->id, size-1);
+ hid_debug_event(hdev, buff);
+ if (raw_data[1] == 0)
+ snprintf(buff, BUFF_SZ, "\tNo key pressed\n");
+ else if (raw_data[2] == 0)
+ snprintf(buff, BUFF_SZ, "\tOne key pressed: 0x%02x (%d)\n",
+ raw_data[1], raw_data[1]);
+ else
+ snprintf(buff, BUFF_SZ, "\tTwo keys pressed: 0x%02x (%d), 0x%02x (%d)\n",
+ raw_data[1], raw_data[1], raw_data[2], raw_data[2]);
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_IR_DATA:
+ /* Up to 20 byes of IR scancode data */
+ snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
+ "REPORT_IR_DATA", report->id, size-1);
+ hid_debug_event(hdev, buff);
+ if (raw_data[1] == 0) {
+ snprintf(buff, BUFF_SZ, "\tUnexpectedly 0 data length\n");
+ hid_debug_event(hdev, buff);
+ } else if (raw_data[1] + 1 <= size) {
+ snprintf(buff, BUFF_SZ, "\tData length: %d\n\tIR Data: ",
+ raw_data[1]-1);
+ hid_debug_event(hdev, buff);
+ dump_buff_as_hex(buff, BUFF_SZ, raw_data+2, raw_data[1]-1);
+ hid_debug_event(hdev, buff);
+ } else {
+ snprintf(buff, BUFF_SZ, "\tOverflowing data length: %d\n",
+ raw_data[1]-1);
+ hid_debug_event(hdev, buff);
+ }
+ break;
+ case REPORT_EE_DATA:
+ /* Data buffer in response to REPORT_EE_READ or REPORT_EE_WRITE */
+ snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
+ "REPORT_EE_DATA", report->id, size-1);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
+ raw_data[2], raw_data[1]);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
+ hid_debug_event(hdev, buff);
+ if (raw_data[3] == 0) {
+ snprintf(buff, BUFF_SZ, "\tNo data\n");
+ hid_debug_event(hdev, buff);
+ } else if (raw_data[3] + 4 <= size) {
+ snprintf(buff, BUFF_SZ, "\tData: ");
+ hid_debug_event(hdev, buff);
+ dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]);
+ hid_debug_event(hdev, buff);
+ } else {
+ snprintf(buff, BUFF_SZ, "\tData overflowed\n");
+ hid_debug_event(hdev, buff);
+ }
+ break;
+ case REPORT_MEMORY:
+ /* Data buffer in response to REPORT_READ_MEMORY or REPORT_WRTIE_MEMORY */
+ snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
+ "REPORT_MEMORY", report->id, size-1);
+ hid_debug_event(hdev, buff);
+ switch (data->addr_sz) {
+ case 2:
+ snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
+ raw_data[2], raw_data[1]);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
+ hid_debug_event(hdev, buff);
+ if (raw_data[3] == 0) {
+ snprintf(buff, BUFF_SZ, "\tNo data\n");
+ } else if (raw_data[3] + 4 <= size) {
+ snprintf(buff, BUFF_SZ, "\tData: ");
+ hid_debug_event(hdev, buff);
+ dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]);
+ } else {
+ snprintf(buff, BUFF_SZ, "\tData overflowed\n");
+ }
+ break;
+ case 3:
+ snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n",
+ raw_data[3], raw_data[2], raw_data[1]);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]);
+ hid_debug_event(hdev, buff);
+ if (raw_data[4] == 0) {
+ snprintf(buff, BUFF_SZ, "\tNo data\n");
+ } else if (raw_data[4] + 5 <= size) {
+ snprintf(buff, BUFF_SZ, "\tData: ");
+ hid_debug_event(hdev, buff);
+ dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]);
+ } else {
+ snprintf(buff, BUFF_SZ, "\tData overflowed\n");
+ }
+ break;
+ default:
+ snprintf(buff, BUFF_SZ, "\tNot supported\n");
+ }
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_VERSION:
+ snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
+ "REPORT_VERSION", report->id, size-1);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n",
+ raw_data[2], raw_data[1]);
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_BL_ERASE_MEMORY:
+ snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
+ "REPORT_BL_ERASE_MEMORY", report->id, size-1);
+ hid_debug_event(hdev, buff);
+ /* TODO */
+ break;
+ case REPORT_BL_READ_MEMORY:
+ snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
+ "REPORT_BL_READ_MEMORY", report->id, size-1);
+ hid_debug_event(hdev, buff);
+ /* TODO */
+ break;
+ case REPORT_BL_WRITE_MEMORY:
+ snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
+ "REPORT_BL_WRITE_MEMORY", report->id, size-1);
+ hid_debug_event(hdev, buff);
+ /* TODO */
+ break;
+ case REPORT_DEVID:
+ snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
+ "REPORT_DEVID", report->id, size-1);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tSerial: 0x%02x%02x%02x%02x\n",
+ raw_data[1], raw_data[2], raw_data[3], raw_data[4]);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tType: 0x%02x\n",
+ raw_data[5]);
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_SPLASH_SIZE:
+ snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
+ "REPORT_SPLASH_SIZE", report->id, size-1);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tTotal splash space: %d\n",
+ (raw_data[2] << 8) | raw_data[1]);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tUsed splash space: %d\n",
+ (raw_data[4] << 8) | raw_data[3]);
+ hid_debug_event(hdev, buff);
+ break;
+ case REPORT_HOOK_VERSION:
+ snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
+ "REPORT_HOOK_VERSION", report->id, size-1);
+ hid_debug_event(hdev, buff);
+ snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n",
+ raw_data[1], raw_data[2]);
+ hid_debug_event(hdev, buff);
+ break;
+ default:
+ snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
+ "<unknown>", report->id, size-1);
+ hid_debug_event(hdev, buff);
+ break;
+ }
+ wake_up_interruptible(&hdev->debug_wait);
+ kfree(buff);
+}
+
+static void picolcd_init_devfs(struct picolcd_data *data,
+ struct hid_report *eeprom_r, struct hid_report *eeprom_w,
+ struct hid_report *flash_r, struct hid_report *flash_w,
+ struct hid_report *reset)
+{
+ struct hid_device *hdev = data->hdev;
+
+ mutex_init(&data->mutex_flash);
+
+ /* reset */
+ if (reset)
+ data->debug_reset = debugfs_create_file("reset", 0600,
+ hdev->debug_dir, data, &picolcd_debug_reset_fops);
+
+ /* eeprom */
+ if (eeprom_r || eeprom_w)
+ data->debug_eeprom = debugfs_create_file("eeprom",
+ (eeprom_w ? S_IWUSR : 0) | (eeprom_r ? S_IRUSR : 0),
+ hdev->debug_dir, data, &picolcd_debug_eeprom_fops);
+
+ /* flash */
+ if (flash_r && flash_r->maxfield == 1 && flash_r->field[0]->report_size == 8)
+ data->addr_sz = flash_r->field[0]->report_count - 1;
+ else
+ data->addr_sz = -1;
+ if (data->addr_sz == 2 || data->addr_sz == 3) {
+ data->debug_flash = debugfs_create_file("flash",
+ (flash_w ? S_IWUSR : 0) | (flash_r ? S_IRUSR : 0),
+ hdev->debug_dir, data, &picolcd_debug_flash_fops);
+ } else if (flash_r || flash_w)
+ dev_warn(&hdev->dev, "Unexpected FLASH access reports, "
+ "please submit rdesc for review\n");
+}
+
+static void picolcd_exit_devfs(struct picolcd_data *data)
+{
+ struct dentry *dent;
+
+ dent = data->debug_reset;
+ data->debug_reset = NULL;
+ if (dent)
+ debugfs_remove(dent);
+ dent = data->debug_eeprom;
+ data->debug_eeprom = NULL;
+ if (dent)
+ debugfs_remove(dent);
+ dent = data->debug_flash;
+ data->debug_flash = NULL;
+ if (dent)
+ debugfs_remove(dent);
+ mutex_destroy(&data->mutex_flash);
+}
+#else
+static inline void picolcd_debug_raw_event(struct picolcd_data *data,
+ struct hid_device *hdev, struct hid_report *report,
+ u8 *raw_data, int size)
+{
+}
+static inline void picolcd_init_devfs(struct picolcd_data *data,
+ struct hid_report *eeprom_r, struct hid_report *eeprom_w,
+ struct hid_report *flash_r, struct hid_report *flash_w,
+ struct hid_report *reset)
+{
+}
+static inline void picolcd_exit_devfs(struct picolcd_data *data)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
+/*
+ * Handle raw report as sent by device
+ */
+static int picolcd_raw_event(struct hid_device *hdev,
+ struct hid_report *report, u8 *raw_data, int size)
+{
+ struct picolcd_data *data = hid_get_drvdata(hdev);
+ unsigned long flags;
+ int ret = 0;
+
+ if (!data)
+ return 1;
+
+ if (report->id == REPORT_KEY_STATE) {
+ if (data->input_keys)
+ ret = picolcd_raw_keypad(data, report, raw_data+1, size-1);
+ } else if (report->id == REPORT_IR_DATA) {
+ if (data->input_cir)
+ ret = picolcd_raw_cir(data, report, raw_data+1, size-1);
+ } else {
+ spin_lock_irqsave(&data->lock, flags);
+ /*
+ * We let the caller of picolcd_send_and_wait() check if the
+ * report we got is one of the expected ones or not.
+ */
+ if (data->pending) {
+ memcpy(data->pending->raw_data, raw_data+1, size-1);
+ data->pending->raw_size = size-1;
+ data->pending->in_report = report;
+ complete(&data->pending->ready);
+ }
+ spin_unlock_irqrestore(&data->lock, flags);
+ }
+
+ picolcd_debug_raw_event(data, hdev, report, raw_data, size);
+ return 1;
+}
+
+#ifdef CONFIG_PM
+static int picolcd_suspend(struct hid_device *hdev, pm_message_t message)
+{
+ if (message.event & PM_EVENT_AUTO)
+ return 0;
+
+ picolcd_suspend_backlight(hid_get_drvdata(hdev));
+ dbg_hid(PICOLCD_NAME " device ready for suspend\n");
+ return 0;
+}
+
+static int picolcd_resume(struct hid_device *hdev)
+{
+ int ret;
+ ret = picolcd_resume_backlight(hid_get_drvdata(hdev));
+ if (ret)
+ dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret);
+ return 0;
+}
+
+static int picolcd_reset_resume(struct hid_device *hdev)
+{
+ int ret;
+ ret = picolcd_reset(hdev);
+ if (ret)
+ dbg_hid(PICOLCD_NAME " resetting our device failed: %d\n", ret);
+ ret = picolcd_fb_reset(hid_get_drvdata(hdev), 0);
+ if (ret)
+ dbg_hid(PICOLCD_NAME " restoring framebuffer content failed: %d\n", ret);
+ ret = picolcd_resume_lcd(hid_get_drvdata(hdev));
+ if (ret)
+ dbg_hid(PICOLCD_NAME " restoring lcd failed: %d\n", ret);
+ ret = picolcd_resume_backlight(hid_get_drvdata(hdev));
+ if (ret)
+ dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret);
+ picolcd_leds_set(hid_get_drvdata(hdev));
+ return 0;
+}
+#endif
+
+/* initialize keypad input device */
+static int picolcd_init_keys(struct picolcd_data *data,
+ struct hid_report *report)
+{
+ struct hid_device *hdev = data->hdev;
+ struct input_dev *idev;
+ int error, i;
+
+ if (!report)
+ return -ENODEV;
+ if (report->maxfield != 1 || report->field[0]->report_count != 2 ||
+ report->field[0]->report_size != 8) {
+ dev_err(&hdev->dev, "unsupported KEY_STATE report");
+ return -EINVAL;
+ }
+
+ idev = input_allocate_device();
+ if (idev == NULL) {
+ dev_err(&hdev->dev, "failed to allocate input device");
+ return -ENOMEM;
+ }
+ input_set_drvdata(idev, hdev);
+ memcpy(data->keycode, def_keymap, sizeof(def_keymap));
+ idev->name = hdev->name;
+ idev->phys = hdev->phys;
+ idev->uniq = hdev->uniq;
+ idev->id.bustype = hdev->bus;
+ idev->id.vendor = hdev->vendor;
+ idev->id.product = hdev->product;
+ idev->id.version = hdev->version;
+ idev->dev.parent = hdev->dev.parent;
+ idev->keycode = &data->keycode;
+ idev->keycodemax = PICOLCD_KEYS;
+ idev->keycodesize = sizeof(data->keycode[0]);
+ input_set_capability(idev, EV_MSC, MSC_SCAN);
+ set_bit(EV_REP, idev->evbit);
+ for (i = 0; i < PICOLCD_KEYS; i++)
+ input_set_capability(idev, EV_KEY, data->keycode[i]);
+ error = input_register_device(idev);
+ if (error) {
+ dev_err(&hdev->dev, "error registering the input device");
+ input_free_device(idev);
+ return error;
+ }
+ data->input_keys = idev;
+ return 0;
+}
+
+static void picolcd_exit_keys(struct picolcd_data *data)
+{
+ struct input_dev *idev = data->input_keys;
+
+ data->input_keys = NULL;
+ if (idev)
+ input_unregister_device(idev);
+}
+
+/* initialize CIR input device */
+static inline int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report)
+{
+ /* support not implemented yet */
+ return 0;
+}
+
+static inline void picolcd_exit_cir(struct picolcd_data *data)
+{
+}
+
+static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data)
+{
+ int error;
+
+ error = picolcd_check_version(hdev);
+ if (error)
+ return error;
+
+ if (data->version[0] != 0 && data->version[1] != 3)
+ dev_info(&hdev->dev, "Device with untested firmware revision, "
+ "please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n",
+ dev_name(&hdev->dev));
+
+ /* Setup keypad input device */
+ error = picolcd_init_keys(data, picolcd_in_report(REPORT_KEY_STATE, hdev));
+ if (error)
+ goto err;
+
+ /* Setup CIR input device */
+ error = picolcd_init_cir(data, picolcd_in_report(REPORT_IR_DATA, hdev));
+ if (error)
+ goto err;
+
+ /* Set up the framebuffer device */
+ error = picolcd_init_framebuffer(data);
+ if (error)
+ goto err;
+
+ /* Setup lcd class device */
+ error = picolcd_init_lcd(data, picolcd_out_report(REPORT_CONTRAST, hdev));
+ if (error)
+ goto err;
+
+ /* Setup backlight class device */
+ error = picolcd_init_backlight(data, picolcd_out_report(REPORT_BRIGHTNESS, hdev));
+ if (error)
+ goto err;
+
+ /* Setup the LED class devices */
+ error = picolcd_init_leds(data, picolcd_out_report(REPORT_LED_STATE, hdev));
+ if (error)
+ goto err;
+
+ picolcd_init_devfs(data, picolcd_out_report(REPORT_EE_READ, hdev),
+ picolcd_out_report(REPORT_EE_WRITE, hdev),
+ picolcd_out_report(REPORT_READ_MEMORY, hdev),
+ picolcd_out_report(REPORT_WRITE_MEMORY, hdev),
+ picolcd_out_report(REPORT_RESET, hdev));
+ return 0;
+err:
+ picolcd_exit_leds(data);
+ picolcd_exit_backlight(data);
+ picolcd_exit_lcd(data);
+ picolcd_exit_framebuffer(data);
+ picolcd_exit_cir(data);
+ picolcd_exit_keys(data);
+ return error;
+}
+
+static int picolcd_probe_bootloader(struct hid_device *hdev, struct picolcd_data *data)
+{
+ int error;
+
+ error = picolcd_check_version(hdev);
+ if (error)
+ return error;
+
+ if (data->version[0] != 1 && data->version[1] != 0)
+ dev_info(&hdev->dev, "Device with untested bootloader revision, "
+ "please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n",
+ dev_name(&hdev->dev));
+
+ picolcd_init_devfs(data, NULL, NULL,
+ picolcd_out_report(REPORT_BL_READ_MEMORY, hdev),
+ picolcd_out_report(REPORT_BL_WRITE_MEMORY, hdev), NULL);
+ return 0;
+}
+
+static int picolcd_probe(struct hid_device *hdev,
+ const struct hid_device_id *id)
+{
+ struct picolcd_data *data;
+ int error = -ENOMEM;
+
+ dbg_hid(PICOLCD_NAME " hardware probe...\n");
+
+ /*
+ * Let's allocate the picolcd data structure, set some reasonable
+ * defaults, and associate it with the device
+ */
+ data = kzalloc(sizeof(struct picolcd_data), GFP_KERNEL);
+ if (data == NULL) {
+ dev_err(&hdev->dev, "can't allocate space for Minibox PicoLCD device data\n");
+ error = -ENOMEM;
+ goto err_no_cleanup;
+ }
+
+ spin_lock_init(&data->lock);
+ mutex_init(&data->mutex);
+ data->hdev = hdev;
+ data->opmode_delay = 5000;
+ if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER)
+ data->status |= PICOLCD_BOOTLOADER;
+ hid_set_drvdata(hdev, data);
+
+ /* Parse the device reports and start it up */
+ error = hid_parse(hdev);
+ if (error) {
+ dev_err(&hdev->dev, "device report parse failed\n");
+ goto err_cleanup_data;
+ }
+
+ /* We don't use hidinput but hid_hw_start() fails if nothing is
+ * claimed. So spoof claimed input. */
+ hdev->claimed = HID_CLAIMED_INPUT;
+ error = hid_hw_start(hdev, 0);
+ hdev->claimed = 0;
+ if (error) {
+ dev_err(&hdev->dev, "hardware start failed\n");
+ goto err_cleanup_data;
+ }
+
+ error = hdev->ll_driver->open(hdev);
+ if (error) {
+ dev_err(&hdev->dev, "failed to open input interrupt pipe for key and IR events\n");
+ goto err_cleanup_hid_hw;
+ }
+
+ error = device_create_file(&hdev->dev, &dev_attr_operation_mode_delay);
+ if (error) {
+ dev_err(&hdev->dev, "failed to create sysfs attributes\n");
+ goto err_cleanup_hid_ll;
+ }
+
+ error = device_create_file(&hdev->dev, &dev_attr_operation_mode);
+ if (error) {
+ dev_err(&hdev->dev, "failed to create sysfs attributes\n");
+ goto err_cleanup_sysfs1;
+ }
+
+ if (data->status & PICOLCD_BOOTLOADER)
+ error = picolcd_probe_bootloader(hdev, data);
+ else
+ error = picolcd_probe_lcd(hdev, data);
+ if (error)
+ goto err_cleanup_sysfs2;
+
+ dbg_hid(PICOLCD_NAME " activated and initialized\n");
+ return 0;
+
+err_cleanup_sysfs2:
+ device_remove_file(&hdev->dev, &dev_attr_operation_mode);
+err_cleanup_sysfs1:
+ device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay);
+err_cleanup_hid_ll:
+ hdev->ll_driver->close(hdev);
+err_cleanup_hid_hw:
+ hid_hw_stop(hdev);
+err_cleanup_data:
+ kfree(data);
+err_no_cleanup:
+ hid_set_drvdata(hdev, NULL);
+
+ return error;
+}
+
+static void picolcd_remove(struct hid_device *hdev)
+{
+ struct picolcd_data *data = hid_get_drvdata(hdev);
+ unsigned long flags;
+
+ dbg_hid(PICOLCD_NAME " hardware remove...\n");
+ spin_lock_irqsave(&data->lock, flags);
+ data->status |= PICOLCD_FAILED;
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ picolcd_exit_devfs(data);
+ device_remove_file(&hdev->dev, &dev_attr_operation_mode);
+ device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay);
+ hdev->ll_driver->close(hdev);
+ hid_hw_stop(hdev);
+ hid_set_drvdata(hdev, NULL);
+
+ /* Shortcut potential pending reply that will never arrive */
+ spin_lock_irqsave(&data->lock, flags);
+ if (data->pending)
+ complete(&data->pending->ready);
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ /* Cleanup LED */
+ picolcd_exit_leds(data);
+ /* Clean up the framebuffer */
+ picolcd_exit_backlight(data);
+ picolcd_exit_lcd(data);
+ picolcd_exit_framebuffer(data);
+ /* Cleanup input */
+ picolcd_exit_cir(data);
+ picolcd_exit_keys(data);
+
+ mutex_destroy(&data->mutex);
+ /* Finally, clean up the picolcd data itself */
+ kfree(data);
+}
+
+static const struct hid_device_id picolcd_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, picolcd_devices);
+
+static struct hid_driver picolcd_driver = {
+ .name = "hid-picolcd",
+ .id_table = picolcd_devices,
+ .probe = picolcd_probe,
+ .remove = picolcd_remove,
+ .raw_event = picolcd_raw_event,
+#ifdef CONFIG_PM
+ .suspend = picolcd_suspend,
+ .resume = picolcd_resume,
+ .reset_resume = picolcd_reset_resume,
+#endif
+};
+
+static int __init picolcd_init(void)
+{
+ return hid_register_driver(&picolcd_driver);
+}
+
+static void __exit picolcd_exit(void)
+{
+ hid_unregister_driver(&picolcd_driver);
+}
+
+module_init(picolcd_init);
+module_exit(picolcd_exit);
+MODULE_DESCRIPTION("Minibox graphics PicoLCD Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hid/hid-prodikeys.c b/drivers/hid/hid-prodikeys.c
new file mode 100644
index 0000000..845f428
--- /dev/null
+++ b/drivers/hid/hid-prodikeys.c
@@ -0,0 +1,910 @@
+/*
+ * HID driver for the Prodikeys PC-MIDI Keyboard
+ * providing midi & extra multimedia keys functionality
+ *
+ * Copyright (c) 2009 Don Prince <dhprince.devel@yahoo.co.uk>
+ *
+ * Controls for Octave Shift Up/Down, Channel, and
+ * Sustain Duration available via sysfs.
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/mutex.h>
+#include <linux/hid.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/rawmidi.h>
+#include "usbhid/usbhid.h"
+#include "hid-ids.h"
+
+
+#define pk_debug(format, arg...) \
+ pr_debug("hid-prodikeys: " format "\n" , ## arg)
+#define pk_error(format, arg...) \
+ pr_err("hid-prodikeys: " format "\n" , ## arg)
+
+struct pcmidi_snd;
+
+struct pk_device {
+ unsigned long quirks;
+
+ struct hid_device *hdev;
+ struct pcmidi_snd *pm; /* pcmidi device context */
+};
+
+struct pcmidi_snd;
+
+struct pcmidi_sustain {
+ unsigned long in_use;
+ struct pcmidi_snd *pm;
+ struct timer_list timer;
+ unsigned char status;
+ unsigned char note;
+ unsigned char velocity;
+};
+
+#define PCMIDI_SUSTAINED_MAX 32
+struct pcmidi_snd {
+ struct pk_device *pk;
+ unsigned short ifnum;
+ struct hid_report *pcmidi_report6;
+ struct input_dev *input_ep82;
+ unsigned short midi_mode;
+ unsigned short midi_sustain_mode;
+ unsigned short midi_sustain;
+ unsigned short midi_channel;
+ short midi_octave;
+ struct pcmidi_sustain sustained_notes[PCMIDI_SUSTAINED_MAX];
+ unsigned short fn_state;
+ unsigned short last_key[24];
+ spinlock_t rawmidi_in_lock;
+ struct snd_card *card;
+ struct snd_rawmidi *rwmidi;
+ struct snd_rawmidi_substream *in_substream;
+ struct snd_rawmidi_substream *out_substream;
+ unsigned long in_triggered;
+ unsigned long out_active;
+};
+
+#define PK_QUIRK_NOGET 0x00010000
+#define PCMIDI_MIDDLE_C 60
+#define PCMIDI_CHANNEL_MIN 0
+#define PCMIDI_CHANNEL_MAX 15
+#define PCMIDI_OCTAVE_MIN (-2)
+#define PCMIDI_OCTAVE_MAX 2
+#define PCMIDI_SUSTAIN_MIN 0
+#define PCMIDI_SUSTAIN_MAX 5000
+
+static const char shortname[] = "PC-MIDI";
+static const char longname[] = "Prodikeys PC-MIDI Keyboard";
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+
+module_param_array(index, int, NULL, 0444);
+module_param_array(id, charp, NULL, 0444);
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for the PC-MIDI virtual audio driver");
+MODULE_PARM_DESC(id, "ID string for the PC-MIDI virtual audio driver");
+MODULE_PARM_DESC(enable, "Enable for the PC-MIDI virtual audio driver");
+
+
+/* Output routine for the sysfs channel file */
+static ssize_t show_channel(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev);
+
+ dbg_hid("pcmidi sysfs read channel=%u\n", pk->pm->midi_channel);
+
+ return sprintf(buf, "%u (min:%u, max:%u)\n", pk->pm->midi_channel,
+ PCMIDI_CHANNEL_MIN, PCMIDI_CHANNEL_MAX);
+}
+
+/* Input routine for the sysfs channel file */
+static ssize_t store_channel(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev);
+
+ unsigned channel = 0;
+
+ if (sscanf(buf, "%u", &channel) > 0 && channel <= PCMIDI_CHANNEL_MAX) {
+ dbg_hid("pcmidi sysfs write channel=%u\n", channel);
+ pk->pm->midi_channel = channel;
+ return strlen(buf);
+ }
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(channel, S_IRUGO | S_IWUGO, show_channel,
+ store_channel);
+
+static struct device_attribute *sysfs_device_attr_channel = {
+ &dev_attr_channel,
+ };
+
+/* Output routine for the sysfs sustain file */
+static ssize_t show_sustain(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev);
+
+ dbg_hid("pcmidi sysfs read sustain=%u\n", pk->pm->midi_sustain);
+
+ return sprintf(buf, "%u (off:%u, max:%u (ms))\n", pk->pm->midi_sustain,
+ PCMIDI_SUSTAIN_MIN, PCMIDI_SUSTAIN_MAX);
+}
+
+/* Input routine for the sysfs sustain file */
+static ssize_t store_sustain(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev);
+
+ unsigned sustain = 0;
+
+ if (sscanf(buf, "%u", &sustain) > 0 && sustain <= PCMIDI_SUSTAIN_MAX) {
+ dbg_hid("pcmidi sysfs write sustain=%u\n", sustain);
+ pk->pm->midi_sustain = sustain;
+ pk->pm->midi_sustain_mode =
+ (0 == sustain || !pk->pm->midi_mode) ? 0 : 1;
+ return strlen(buf);
+ }
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(sustain, S_IRUGO | S_IWUGO, show_sustain,
+ store_sustain);
+
+static struct device_attribute *sysfs_device_attr_sustain = {
+ &dev_attr_sustain,
+ };
+
+/* Output routine for the sysfs octave file */
+static ssize_t show_octave(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev);
+
+ dbg_hid("pcmidi sysfs read octave=%d\n", pk->pm->midi_octave);
+
+ return sprintf(buf, "%d (min:%d, max:%d)\n", pk->pm->midi_octave,
+ PCMIDI_OCTAVE_MIN, PCMIDI_OCTAVE_MAX);
+}
+
+/* Input routine for the sysfs octave file */
+static ssize_t store_octave(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev);
+
+ int octave = 0;
+
+ if (sscanf(buf, "%d", &octave) > 0 &&
+ octave >= PCMIDI_OCTAVE_MIN && octave <= PCMIDI_OCTAVE_MAX) {
+ dbg_hid("pcmidi sysfs write octave=%d\n", octave);
+ pk->pm->midi_octave = octave;
+ return strlen(buf);
+ }
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(octave, S_IRUGO | S_IWUGO, show_octave,
+ store_octave);
+
+static struct device_attribute *sysfs_device_attr_octave = {
+ &dev_attr_octave,
+ };
+
+
+static void pcmidi_send_note(struct pcmidi_snd *pm,
+ unsigned char status, unsigned char note, unsigned char velocity)
+{
+ unsigned long flags;
+ unsigned char buffer[3];
+
+ buffer[0] = status;
+ buffer[1] = note;
+ buffer[2] = velocity;
+
+ spin_lock_irqsave(&pm->rawmidi_in_lock, flags);
+
+ if (!pm->in_substream)
+ goto drop_note;
+ if (!test_bit(pm->in_substream->number, &pm->in_triggered))
+ goto drop_note;
+
+ snd_rawmidi_receive(pm->in_substream, buffer, 3);
+
+drop_note:
+ spin_unlock_irqrestore(&pm->rawmidi_in_lock, flags);
+
+ return;
+}
+
+void pcmidi_sustained_note_release(unsigned long data)
+{
+ struct pcmidi_sustain *pms = (struct pcmidi_sustain *)data;
+
+ pcmidi_send_note(pms->pm, pms->status, pms->note, pms->velocity);
+ pms->in_use = 0;
+}
+
+void init_sustain_timers(struct pcmidi_snd *pm)
+{
+ struct pcmidi_sustain *pms;
+ unsigned i;
+
+ for (i = 0; i < PCMIDI_SUSTAINED_MAX; i++) {
+ pms = &pm->sustained_notes[i];
+ pms->in_use = 0;
+ pms->pm = pm;
+ setup_timer(&pms->timer, pcmidi_sustained_note_release,
+ (unsigned long)pms);
+ }
+}
+
+void stop_sustain_timers(struct pcmidi_snd *pm)
+{
+ struct pcmidi_sustain *pms;
+ unsigned i;
+
+ for (i = 0; i < PCMIDI_SUSTAINED_MAX; i++) {
+ pms = &pm->sustained_notes[i];
+ pms->in_use = 1;
+ del_timer_sync(&pms->timer);
+ }
+}
+
+static int pcmidi_get_output_report(struct pcmidi_snd *pm)
+{
+ struct hid_device *hdev = pm->pk->hdev;
+ struct hid_report *report;
+
+ list_for_each_entry(report,
+ &hdev->report_enum[HID_OUTPUT_REPORT].report_list, list) {
+ if (!(6 == report->id))
+ continue;
+
+ if (report->maxfield < 1) {
+ dev_err(&hdev->dev, "output report is empty\n");
+ break;
+ }
+ if (report->field[0]->report_count != 2) {
+ dev_err(&hdev->dev, "field count too low\n");
+ break;
+ }
+ pm->pcmidi_report6 = report;
+ return 0;
+ }
+ /* should never get here */
+ return -ENODEV;
+}
+
+static void pcmidi_submit_output_report(struct pcmidi_snd *pm, int state)
+{
+ struct hid_device *hdev = pm->pk->hdev;
+ struct hid_report *report = pm->pcmidi_report6;
+ report->field[0]->value[0] = 0x01;
+ report->field[0]->value[1] = state;
+
+ usbhid_submit_report(hdev, report, USB_DIR_OUT);
+}
+
+static int pcmidi_handle_report1(struct pcmidi_snd *pm, u8 *data)
+{
+ u32 bit_mask;
+
+ bit_mask = data[1];
+ bit_mask = (bit_mask << 8) | data[2];
+ bit_mask = (bit_mask << 8) | data[3];
+
+ dbg_hid("pcmidi mode: %d\n", pm->midi_mode);
+
+ /*KEY_MAIL or octave down*/
+ if (pm->midi_mode && bit_mask == 0x004000) {
+ /* octave down */
+ pm->midi_octave--;
+ if (pm->midi_octave < -2)
+ pm->midi_octave = -2;
+ dbg_hid("pcmidi mode: %d octave: %d\n",
+ pm->midi_mode, pm->midi_octave);
+ return 1;
+ }
+ /*KEY_WWW or sustain*/
+ else if (pm->midi_mode && bit_mask == 0x000004) {
+ /* sustain on/off*/
+ pm->midi_sustain_mode ^= 0x1;
+ return 1;
+ }
+
+ return 0; /* continue key processing */
+}
+
+static int pcmidi_handle_report3(struct pcmidi_snd *pm, u8 *data, int size)
+{
+ struct pcmidi_sustain *pms;
+ unsigned i, j;
+ unsigned char status, note, velocity;
+
+ unsigned num_notes = (size-1)/2;
+ for (j = 0; j < num_notes; j++) {
+ note = data[j*2+1];
+ velocity = data[j*2+2];
+
+ if (note < 0x81) { /* note on */
+ status = 128 + 16 + pm->midi_channel; /* 1001nnnn */
+ note = note - 0x54 + PCMIDI_MIDDLE_C +
+ (pm->midi_octave * 12);
+ if (0 == velocity)
+ velocity = 1; /* force note on */
+ } else { /* note off */
+ status = 128 + pm->midi_channel; /* 1000nnnn */
+ note = note - 0x94 + PCMIDI_MIDDLE_C +
+ (pm->midi_octave*12);
+
+ if (pm->midi_sustain_mode) {
+ for (i = 0; i < PCMIDI_SUSTAINED_MAX; i++) {
+ pms = &pm->sustained_notes[i];
+ if (!pms->in_use) {
+ pms->status = status;
+ pms->note = note;
+ pms->velocity = velocity;
+ pms->in_use = 1;
+
+ mod_timer(&pms->timer,
+ jiffies +
+ msecs_to_jiffies(pm->midi_sustain));
+ return 1;
+ }
+ }
+ }
+ }
+ pcmidi_send_note(pm, status, note, velocity);
+ }
+
+ return 1;
+}
+
+static int pcmidi_handle_report4(struct pcmidi_snd *pm, u8 *data)
+{
+ unsigned key;
+ u32 bit_mask;
+ u32 bit_index;
+
+ bit_mask = data[1];
+ bit_mask = (bit_mask << 8) | data[2];
+ bit_mask = (bit_mask << 8) | data[3];
+
+ /* break keys */
+ for (bit_index = 0; bit_index < 24; bit_index++) {
+ key = pm->last_key[bit_index];
+ if (!((0x01 << bit_index) & bit_mask)) {
+ input_event(pm->input_ep82, EV_KEY,
+ pm->last_key[bit_index], 0);
+ pm->last_key[bit_index] = 0;
+ }
+ }
+
+ /* make keys */
+ for (bit_index = 0; bit_index < 24; bit_index++) {
+ key = 0;
+ switch ((0x01 << bit_index) & bit_mask) {
+ case 0x000010: /* Fn lock*/
+ pm->fn_state ^= 0x000010;
+ if (pm->fn_state)
+ pcmidi_submit_output_report(pm, 0xc5);
+ else
+ pcmidi_submit_output_report(pm, 0xc6);
+ continue;
+ case 0x020000: /* midi launcher..send a key (qwerty) or not? */
+ pcmidi_submit_output_report(pm, 0xc1);
+ pm->midi_mode ^= 0x01;
+
+ dbg_hid("pcmidi mode: %d\n", pm->midi_mode);
+ continue;
+ case 0x100000: /* KEY_MESSENGER or octave up */
+ dbg_hid("pcmidi mode: %d\n", pm->midi_mode);
+ if (pm->midi_mode) {
+ pm->midi_octave++;
+ if (pm->midi_octave > 2)
+ pm->midi_octave = 2;
+ dbg_hid("pcmidi mode: %d octave: %d\n",
+ pm->midi_mode, pm->midi_octave);
+ continue;
+ } else
+ key = KEY_MESSENGER;
+ break;
+ case 0x400000:
+ key = KEY_CALENDAR;
+ break;
+ case 0x080000:
+ key = KEY_ADDRESSBOOK;
+ break;
+ case 0x040000:
+ key = KEY_DOCUMENTS;
+ break;
+ case 0x800000:
+ key = KEY_WORDPROCESSOR;
+ break;
+ case 0x200000:
+ key = KEY_SPREADSHEET;
+ break;
+ case 0x010000:
+ key = KEY_COFFEE;
+ break;
+ case 0x000100:
+ key = KEY_HELP;
+ break;
+ case 0x000200:
+ key = KEY_SEND;
+ break;
+ case 0x000400:
+ key = KEY_REPLY;
+ break;
+ case 0x000800:
+ key = KEY_FORWARDMAIL;
+ break;
+ case 0x001000:
+ key = KEY_NEW;
+ break;
+ case 0x002000:
+ key = KEY_OPEN;
+ break;
+ case 0x004000:
+ key = KEY_CLOSE;
+ break;
+ case 0x008000:
+ key = KEY_SAVE;
+ break;
+ case 0x000001:
+ key = KEY_UNDO;
+ break;
+ case 0x000002:
+ key = KEY_REDO;
+ break;
+ case 0x000004:
+ key = KEY_SPELLCHECK;
+ break;
+ case 0x000008:
+ key = KEY_PRINT;
+ break;
+ }
+ if (key) {
+ input_event(pm->input_ep82, EV_KEY, key, 1);
+ pm->last_key[bit_index] = key;
+ }
+ }
+
+ return 1;
+}
+
+int pcmidi_handle_report(
+ struct pcmidi_snd *pm, unsigned report_id, u8 *data, int size)
+{
+ int ret = 0;
+
+ switch (report_id) {
+ case 0x01: /* midi keys (qwerty)*/
+ ret = pcmidi_handle_report1(pm, data);
+ break;
+ case 0x03: /* midi keyboard (musical)*/
+ ret = pcmidi_handle_report3(pm, data, size);
+ break;
+ case 0x04: /* multimedia/midi keys (qwerty)*/
+ ret = pcmidi_handle_report4(pm, data);
+ break;
+ }
+ return ret;
+}
+
+void pcmidi_setup_extra_keys(struct pcmidi_snd *pm, struct input_dev *input)
+{
+ /* reassigned functionality for N/A keys
+ MY PICTURES => KEY_WORDPROCESSOR
+ MY MUSIC=> KEY_SPREADSHEET
+ */
+ unsigned int keys[] = {
+ KEY_FN,
+ KEY_MESSENGER, KEY_CALENDAR,
+ KEY_ADDRESSBOOK, KEY_DOCUMENTS,
+ KEY_WORDPROCESSOR,
+ KEY_SPREADSHEET,
+ KEY_COFFEE,
+ KEY_HELP, KEY_SEND,
+ KEY_REPLY, KEY_FORWARDMAIL,
+ KEY_NEW, KEY_OPEN,
+ KEY_CLOSE, KEY_SAVE,
+ KEY_UNDO, KEY_REDO,
+ KEY_SPELLCHECK, KEY_PRINT,
+ 0
+ };
+
+ unsigned int *pkeys = &keys[0];
+ unsigned short i;
+
+ if (pm->ifnum != 1) /* only set up ONCE for interace 1 */
+ return;
+
+ pm->input_ep82 = input;
+
+ for (i = 0; i < 24; i++)
+ pm->last_key[i] = 0;
+
+ while (*pkeys != 0) {
+ set_bit(*pkeys, pm->input_ep82->keybit);
+ ++pkeys;
+ }
+}
+
+static int pcmidi_set_operational(struct pcmidi_snd *pm)
+{
+ if (pm->ifnum != 1)
+ return 0; /* only set up ONCE for interace 1 */
+
+ pcmidi_get_output_report(pm);
+ pcmidi_submit_output_report(pm, 0xc1);
+ return 0;
+}
+
+static int pcmidi_snd_free(struct snd_device *dev)
+{
+ return 0;
+}
+
+static int pcmidi_in_open(struct snd_rawmidi_substream *substream)
+{
+ struct pcmidi_snd *pm = substream->rmidi->private_data;
+
+ dbg_hid("pcmidi in open\n");
+ pm->in_substream = substream;
+ return 0;
+}
+
+static int pcmidi_in_close(struct snd_rawmidi_substream *substream)
+{
+ dbg_hid("pcmidi in close\n");
+ return 0;
+}
+
+static void pcmidi_in_trigger(struct snd_rawmidi_substream *substream, int up)
+{
+ struct pcmidi_snd *pm = substream->rmidi->private_data;
+
+ dbg_hid("pcmidi in trigger %d\n", up);
+
+ pm->in_triggered = up;
+}
+
+static struct snd_rawmidi_ops pcmidi_in_ops = {
+ .open = pcmidi_in_open,
+ .close = pcmidi_in_close,
+ .trigger = pcmidi_in_trigger
+};
+
+int pcmidi_snd_initialise(struct pcmidi_snd *pm)
+{
+ static int dev;
+ struct snd_card *card;
+ struct snd_rawmidi *rwmidi;
+ int err;
+
+ static struct snd_device_ops ops = {
+ .dev_free = pcmidi_snd_free,
+ };
+
+ if (pm->ifnum != 1)
+ return 0; /* only set up midi device ONCE for interace 1 */
+
+ if (dev >= SNDRV_CARDS)
+ return -ENODEV;
+
+ if (!enable[dev]) {
+ dev++;
+ return -ENOENT;
+ }
+
+ /* Setup sound card */
+
+ err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+ if (err < 0) {
+ pk_error("failed to create pc-midi sound card\n");
+ err = -ENOMEM;
+ goto fail;
+ }
+ pm->card = card;
+
+ /* Setup sound device */
+ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, pm, &ops);
+ if (err < 0) {
+ pk_error("failed to create pc-midi sound device: error %d\n",
+ err);
+ goto fail;
+ }
+
+ strncpy(card->driver, shortname, sizeof(card->driver));
+ strncpy(card->shortname, shortname, sizeof(card->shortname));
+ strncpy(card->longname, longname, sizeof(card->longname));
+
+ /* Set up rawmidi */
+ err = snd_rawmidi_new(card, card->shortname, 0,
+ 0, 1, &rwmidi);
+ if (err < 0) {
+ pk_error("failed to create pc-midi rawmidi device: error %d\n",
+ err);
+ goto fail;
+ }
+ pm->rwmidi = rwmidi;
+ strncpy(rwmidi->name, card->shortname, sizeof(rwmidi->name));
+ rwmidi->info_flags = SNDRV_RAWMIDI_INFO_INPUT;
+ rwmidi->private_data = pm;
+
+ snd_rawmidi_set_ops(rwmidi, SNDRV_RAWMIDI_STREAM_INPUT,
+ &pcmidi_in_ops);
+
+ snd_card_set_dev(card, &pm->pk->hdev->dev);
+
+ /* create sysfs variables */
+ err = device_create_file(&pm->pk->hdev->dev,
+ sysfs_device_attr_channel);
+ if (err < 0) {
+ pk_error("failed to create sysfs attribute channel: error %d\n",
+ err);
+ goto fail;
+ }
+
+ err = device_create_file(&pm->pk->hdev->dev,
+ sysfs_device_attr_sustain);
+ if (err < 0) {
+ pk_error("failed to create sysfs attribute sustain: error %d\n",
+ err);
+ goto fail_attr_sustain;
+ }
+
+ err = device_create_file(&pm->pk->hdev->dev,
+ sysfs_device_attr_octave);
+ if (err < 0) {
+ pk_error("failed to create sysfs attribute octave: error %d\n",
+ err);
+ goto fail_attr_octave;
+ }
+
+ spin_lock_init(&pm->rawmidi_in_lock);
+
+ init_sustain_timers(pm);
+ pcmidi_set_operational(pm);
+
+ /* register it */
+ err = snd_card_register(card);
+ if (err < 0) {
+ pk_error("failed to register pc-midi sound card: error %d\n",
+ err);
+ goto fail_register;
+ }
+
+ dbg_hid("pcmidi_snd_initialise finished ok\n");
+ return 0;
+
+fail_register:
+ stop_sustain_timers(pm);
+ device_remove_file(&pm->pk->hdev->dev, sysfs_device_attr_octave);
+fail_attr_octave:
+ device_remove_file(&pm->pk->hdev->dev, sysfs_device_attr_sustain);
+fail_attr_sustain:
+ device_remove_file(&pm->pk->hdev->dev, sysfs_device_attr_channel);
+fail:
+ if (pm->card) {
+ snd_card_free(pm->card);
+ pm->card = NULL;
+ }
+ return err;
+}
+
+int pcmidi_snd_terminate(struct pcmidi_snd *pm)
+{
+ if (pm->card) {
+ stop_sustain_timers(pm);
+
+ device_remove_file(&pm->pk->hdev->dev,
+ sysfs_device_attr_channel);
+ device_remove_file(&pm->pk->hdev->dev,
+ sysfs_device_attr_sustain);
+ device_remove_file(&pm->pk->hdev->dev,
+ sysfs_device_attr_octave);
+
+ snd_card_disconnect(pm->card);
+ snd_card_free_when_closed(pm->card);
+ }
+
+ return 0;
+}
+
+/*
+ * PC-MIDI report descriptor for report id is wrong.
+ */
+static void pk_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+ unsigned int rsize)
+{
+ if (rsize == 178 &&
+ rdesc[111] == 0x06 && rdesc[112] == 0x00 &&
+ rdesc[113] == 0xff) {
+ dev_info(&hdev->dev, "fixing up pc-midi keyboard report "
+ "descriptor\n");
+
+ rdesc[144] = 0x18; /* report 4: was 0x10 report count */
+ }
+}
+
+static int pk_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev);
+ struct pcmidi_snd *pm;
+
+ pm = pk->pm;
+
+ if (HID_UP_MSVENDOR == (usage->hid & HID_USAGE_PAGE) &&
+ 1 == pm->ifnum) {
+ pcmidi_setup_extra_keys(pm, hi->input);
+ return 0;
+ }
+
+ return 0;
+}
+
+
+static int pk_raw_event(struct hid_device *hdev, struct hid_report *report,
+ u8 *data, int size)
+{
+ struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev);
+ int ret = 0;
+
+ if (1 == pk->pm->ifnum) {
+ if (report->id == data[0])
+ switch (report->id) {
+ case 0x01: /* midi keys (qwerty)*/
+ case 0x03: /* midi keyboard (musical)*/
+ case 0x04: /* extra/midi keys (qwerty)*/
+ ret = pcmidi_handle_report(pk->pm,
+ report->id, data, size);
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int pk_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int ret;
+ struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+ unsigned short ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+ unsigned long quirks = id->driver_data;
+ struct pk_device *pk;
+ struct pcmidi_snd *pm = NULL;
+
+ pk = kzalloc(sizeof(*pk), GFP_KERNEL);
+ if (pk == NULL) {
+ dev_err(&hdev->dev, "prodikeys: can't alloc descriptor\n");
+ return -ENOMEM;
+ }
+
+ pk->hdev = hdev;
+
+ pm = kzalloc(sizeof(*pm), GFP_KERNEL);
+ if (pm == NULL) {
+ dev_err(&hdev->dev,
+ "prodikeys: can't alloc descriptor\n");
+ ret = -ENOMEM;
+ goto err_free;
+ }
+
+ pm->pk = pk;
+ pk->pm = pm;
+ pm->ifnum = ifnum;
+
+ hid_set_drvdata(hdev, pk);
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ dev_err(&hdev->dev, "prodikeys: hid parse failed\n");
+ goto err_free;
+ }
+
+ if (quirks & PK_QUIRK_NOGET) { /* hid_parse cleared all the quirks */
+ hdev->quirks |= HID_QUIRK_NOGET;
+ }
+
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (ret) {
+ dev_err(&hdev->dev, "prodikeys: hw start failed\n");
+ goto err_free;
+ }
+
+ ret = pcmidi_snd_initialise(pm);
+ if (ret < 0)
+ goto err_stop;
+
+ return 0;
+err_stop:
+ hid_hw_stop(hdev);
+err_free:
+ if (pm != NULL)
+ kfree(pm);
+
+ kfree(pk);
+ return ret;
+}
+
+static void pk_remove(struct hid_device *hdev)
+{
+ struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev);
+ struct pcmidi_snd *pm;
+
+ pm = pk->pm;
+ if (pm) {
+ pcmidi_snd_terminate(pm);
+ kfree(pm);
+ }
+
+ hid_hw_stop(hdev);
+
+ kfree(pk);
+}
+
+static const struct hid_device_id pk_devices[] = {
+ {HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS,
+ USB_DEVICE_ID_PRODIKEYS_PCMIDI),
+ .driver_data = PK_QUIRK_NOGET},
+ { }
+};
+MODULE_DEVICE_TABLE(hid, pk_devices);
+
+static struct hid_driver pk_driver = {
+ .name = "prodikeys",
+ .id_table = pk_devices,
+ .report_fixup = pk_report_fixup,
+ .input_mapping = pk_input_mapping,
+ .raw_event = pk_raw_event,
+ .probe = pk_probe,
+ .remove = pk_remove,
+};
+
+static int pk_init(void)
+{
+ int ret;
+
+ ret = hid_register_driver(&pk_driver);
+ if (ret)
+ printk(KERN_ERR "can't register prodikeys driver\n");
+
+ return ret;
+}
+
+static void pk_exit(void)
+{
+ hid_unregister_driver(&pk_driver);
+}
+
+module_init(pk_init);
+module_exit(pk_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c
new file mode 100644
index 0000000..66e6940
--- /dev/null
+++ b/drivers/hid/hid-roccat-kone.c
@@ -0,0 +1,994 @@
+/*
+ * Roccat Kone driver for Linux
+ *
+ * Copyright (c) 2010 Stefan Achatz <erazor_de@users.sourceforge.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * Roccat Kone is a gamer mouse which consists of a mouse part and a keyboard
+ * part. The keyboard part enables the mouse to execute stored macros with mixed
+ * key- and button-events.
+ *
+ * TODO implement on-the-fly polling-rate change
+ * The windows driver has the ability to change the polling rate of the
+ * device on the press of a mousebutton.
+ * Is it possible to remove and reinstall the urb in raw-event- or any
+ * other handler, or to defer this action to be executed somewhere else?
+ *
+ * TODO implement notification mechanism for overlong macro execution
+ * If user wants to execute an overlong macro only the names of macroset
+ * and macro are given. Should userland tap hidraw or is there an
+ * additional streaming mechanism?
+ *
+ * TODO is it possible to overwrite group for sysfs attributes via udev?
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/hid.h>
+#include <linux/usb.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include "hid-ids.h"
+#include "hid-roccat-kone.h"
+
+static void kone_set_settings_checksum(struct kone_settings *settings)
+{
+ uint16_t checksum = 0;
+ unsigned char *address = (unsigned char *)settings;
+ int i;
+
+ for (i = 0; i < sizeof(struct kone_settings) - 2; ++i, ++address)
+ checksum += *address;
+ settings->checksum = cpu_to_le16(checksum);
+}
+
+/*
+ * Checks success after writing data to mouse
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_check_write(struct usb_device *usb_dev)
+{
+ int len;
+ unsigned char *data;
+
+ data = kmalloc(1, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ do {
+ /*
+ * Mouse needs 50 msecs until it says ok, but there are
+ * 30 more msecs needed for next write to work.
+ */
+ msleep(80);
+
+ len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE |
+ USB_DIR_IN,
+ kone_command_confirm_write, 0, data, 1,
+ USB_CTRL_SET_TIMEOUT);
+
+ if (len != 1) {
+ kfree(data);
+ return -EIO;
+ }
+
+ /*
+ * value of 3 seems to mean something like
+ * "not finished yet, but it looks good"
+ * So check again after a moment.
+ */
+ } while (*data == 3);
+
+ if (*data == 1) { /* everything alright */
+ kfree(data);
+ return 0;
+ } else { /* unknown answer */
+ dev_err(&usb_dev->dev, "got retval %d when checking write\n",
+ *data);
+ kfree(data);
+ return -EIO;
+ }
+}
+
+/*
+ * Reads settings from mouse and stores it in @buf
+ * @buf has to be alloced with GFP_KERNEL
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_get_settings(struct usb_device *usb_dev,
+ struct kone_settings *buf)
+{
+ int len;
+
+ len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ kone_command_settings, 0, buf,
+ sizeof(struct kone_settings), USB_CTRL_SET_TIMEOUT);
+
+ if (len != sizeof(struct kone_settings))
+ return -EIO;
+
+ return 0;
+}
+
+/*
+ * Writes settings from @buf to mouse
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_set_settings(struct usb_device *usb_dev,
+ struct kone_settings const *settings)
+{
+ int len;
+
+ len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+ USB_REQ_SET_CONFIGURATION,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ kone_command_settings, 0, (char *)settings,
+ sizeof(struct kone_settings),
+ USB_CTRL_SET_TIMEOUT);
+
+ if (len != sizeof(struct kone_settings))
+ return -EIO;
+
+ if (kone_check_write(usb_dev))
+ return -EIO;
+
+ return 0;
+}
+
+/*
+ * Reads profile data from mouse and stores it in @buf
+ * @number: profile number to read
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_get_profile(struct usb_device *usb_dev,
+ struct kone_profile *buf, int number)
+{
+ int len;
+
+ if (number < 1 || number > 5)
+ return -EINVAL;
+
+ len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ kone_command_profile, number, buf,
+ sizeof(struct kone_profile), USB_CTRL_SET_TIMEOUT);
+
+ if (len != sizeof(struct kone_profile))
+ return -EIO;
+
+ return 0;
+}
+
+/*
+ * Writes profile data to mouse.
+ * @number: profile number to write
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_set_profile(struct usb_device *usb_dev,
+ struct kone_profile const *profile, int number)
+{
+ int len;
+
+ if (number < 1 || number > 5)
+ return -EINVAL;
+
+ len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+ USB_REQ_SET_CONFIGURATION,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ kone_command_profile, number, (char *)profile,
+ sizeof(struct kone_profile),
+ USB_CTRL_SET_TIMEOUT);
+
+ if (len != sizeof(struct kone_profile))
+ return len;
+
+ if (kone_check_write(usb_dev))
+ return -EIO;
+
+ return 0;
+}
+
+/*
+ * Reads value of "fast-clip-weight" and stores it in @result
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_get_weight(struct usb_device *usb_dev, int *result)
+{
+ int len;
+ uint8_t *data;
+
+ data = kmalloc(1, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ kone_command_weight, 0, data, 1, USB_CTRL_SET_TIMEOUT);
+
+ if (len != 1) {
+ kfree(data);
+ return -EIO;
+ }
+ *result = (int)*data;
+ kfree(data);
+ return 0;
+}
+
+/*
+ * Reads firmware_version of mouse and stores it in @result
+ * On success returns 0
+ * On failure returns errno
+ */
+static int kone_get_firmware_version(struct usb_device *usb_dev, int *result)
+{
+ int len;
+ unsigned char *data;
+
+ data = kmalloc(2, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ kone_command_firmware_version, 0, data, 2,
+ USB_CTRL_SET_TIMEOUT);
+
+ if (len != 2) {
+ kfree(data);
+ return -EIO;
+ }
+ *result = le16_to_cpu(*data);
+ kfree(data);
+ return 0;
+}
+
+static ssize_t kone_sysfs_read_settings(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+
+ if (off >= sizeof(struct kone_settings))
+ return 0;
+
+ if (off + count > sizeof(struct kone_settings))
+ count = sizeof(struct kone_settings) - off;
+
+ mutex_lock(&kone->kone_lock);
+ memcpy(buf, &kone->settings + off, count);
+ mutex_unlock(&kone->kone_lock);
+
+ return count;
+}
+
+/*
+ * Writing settings automatically activates startup_profile.
+ * This function keeps values in kone_device up to date and assumes that in
+ * case of error the old data is still valid
+ */
+static ssize_t kone_sysfs_write_settings(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ int retval = 0, difference;
+
+ /* I need to get my data in one piece */
+ if (off != 0 || count != sizeof(struct kone_settings))
+ return -EINVAL;
+
+ mutex_lock(&kone->kone_lock);
+ difference = memcmp(buf, &kone->settings, sizeof(struct kone_settings));
+ if (difference) {
+ retval = kone_set_settings(usb_dev,
+ (struct kone_settings const *)buf);
+ if (!retval)
+ memcpy(&kone->settings, buf,
+ sizeof(struct kone_settings));
+ }
+ mutex_unlock(&kone->kone_lock);
+
+ if (retval)
+ return retval;
+
+ /*
+ * If we get here, treat settings as okay and update actual values
+ * according to startup_profile
+ */
+ kone->actual_profile = kone->settings.startup_profile;
+ kone->actual_dpi = kone->profiles[kone->actual_profile - 1].startup_dpi;
+
+ return sizeof(struct kone_settings);
+}
+
+static ssize_t kone_sysfs_read_profilex(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count, int number) {
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+
+ if (off >= sizeof(struct kone_profile))
+ return 0;
+
+ if (off + count > sizeof(struct kone_profile))
+ count = sizeof(struct kone_profile) - off;
+
+ mutex_lock(&kone->kone_lock);
+ memcpy(buf, &kone->profiles[number - 1], sizeof(struct kone_profile));
+ mutex_unlock(&kone->kone_lock);
+
+ return count;
+}
+
+static ssize_t kone_sysfs_read_profile1(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 1);
+}
+
+static ssize_t kone_sysfs_read_profile2(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 2);
+}
+
+static ssize_t kone_sysfs_read_profile3(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 3);
+}
+
+static ssize_t kone_sysfs_read_profile4(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 4);
+}
+
+static ssize_t kone_sysfs_read_profile5(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 5);
+}
+
+/* Writes data only if different to stored data */
+static ssize_t kone_sysfs_write_profilex(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count, int number) {
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ struct kone_profile *profile;
+ int retval = 0, difference;
+
+ /* I need to get my data in one piece */
+ if (off != 0 || count != sizeof(struct kone_profile))
+ return -EINVAL;
+
+ profile = &kone->profiles[number - 1];
+
+ mutex_lock(&kone->kone_lock);
+ difference = memcmp(buf, profile, sizeof(struct kone_profile));
+ if (difference) {
+ retval = kone_set_profile(usb_dev,
+ (struct kone_profile const *)buf, number);
+ if (!retval)
+ memcpy(profile, buf, sizeof(struct kone_profile));
+ }
+ mutex_unlock(&kone->kone_lock);
+
+ if (retval)
+ return retval;
+
+ return sizeof(struct kone_profile);
+}
+
+static ssize_t kone_sysfs_write_profile1(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 1);
+}
+
+static ssize_t kone_sysfs_write_profile2(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 2);
+}
+
+static ssize_t kone_sysfs_write_profile3(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 3);
+}
+
+static ssize_t kone_sysfs_write_profile4(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 4);
+}
+
+static ssize_t kone_sysfs_write_profile5(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count) {
+ return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 5);
+}
+
+static ssize_t kone_sysfs_show_actual_profile(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ return snprintf(buf, PAGE_SIZE, "%d\n", kone->actual_profile);
+}
+
+static ssize_t kone_sysfs_show_actual_dpi(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ return snprintf(buf, PAGE_SIZE, "%d\n", kone->actual_dpi);
+}
+
+/* weight is read each time, since we don't get informed when it's changed */
+static ssize_t kone_sysfs_show_weight(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ int weight = 0;
+ int retval;
+
+ mutex_lock(&kone->kone_lock);
+ retval = kone_get_weight(usb_dev, &weight);
+ mutex_unlock(&kone->kone_lock);
+
+ if (retval)
+ return retval;
+ return snprintf(buf, PAGE_SIZE, "%d\n", weight);
+}
+
+static ssize_t kone_sysfs_show_firmware_version(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ return snprintf(buf, PAGE_SIZE, "%d\n", kone->firmware_version);
+}
+
+static ssize_t kone_sysfs_show_tcu(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ return snprintf(buf, PAGE_SIZE, "%d\n", kone->settings.tcu);
+}
+
+static int kone_tcu_command(struct usb_device *usb_dev, int number)
+{
+ int len;
+ char *value;
+
+ value = kmalloc(1, GFP_KERNEL);
+ if (!value)
+ return -ENOMEM;
+
+ *value = number;
+
+ len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+ USB_REQ_SET_CONFIGURATION,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ kone_command_calibrate, 0, value, 1,
+ USB_CTRL_SET_TIMEOUT);
+
+ kfree(value);
+ return ((len != 1) ? -EIO : 0);
+}
+
+/*
+ * Calibrating the tcu is the only action that changes settings data inside the
+ * mouse, so this data needs to be reread
+ */
+static ssize_t kone_sysfs_set_tcu(struct device *dev,
+ struct device_attribute *attr, char const *buf, size_t size)
+{
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ int retval;
+ unsigned long state;
+
+ retval = strict_strtoul(buf, 10, &state);
+ if (retval)
+ return retval;
+
+ if (state != 0 && state != 1)
+ return -EINVAL;
+
+ mutex_lock(&kone->kone_lock);
+
+ if (state == 1) { /* state activate */
+ retval = kone_tcu_command(usb_dev, 1);
+ if (retval)
+ goto exit_unlock;
+ retval = kone_tcu_command(usb_dev, 2);
+ if (retval)
+ goto exit_unlock;
+ ssleep(5); /* tcu needs this time for calibration */
+ retval = kone_tcu_command(usb_dev, 3);
+ if (retval)
+ goto exit_unlock;
+ retval = kone_tcu_command(usb_dev, 0);
+ if (retval)
+ goto exit_unlock;
+ retval = kone_tcu_command(usb_dev, 4);
+ if (retval)
+ goto exit_unlock;
+ /*
+ * Kone needs this time to settle things.
+ * Reading settings too early will result in invalid data.
+ * Roccat's driver waits 1 sec, maybe this time could be
+ * shortened.
+ */
+ ssleep(1);
+ }
+
+ /* calibration changes values in settings, so reread */
+ retval = kone_get_settings(usb_dev, &kone->settings);
+ if (retval)
+ goto exit_no_settings;
+
+ /* only write settings back if activation state is different */
+ if (kone->settings.tcu != state) {
+ kone->settings.tcu = state;
+ kone_set_settings_checksum(&kone->settings);
+
+ retval = kone_set_settings(usb_dev, &kone->settings);
+ if (retval) {
+ dev_err(&usb_dev->dev, "couldn't set tcu state\n");
+ /*
+ * try to reread valid settings into buffer overwriting
+ * first error code
+ */
+ retval = kone_get_settings(usb_dev, &kone->settings);
+ if (retval)
+ goto exit_no_settings;
+ goto exit_unlock;
+ }
+ }
+
+ retval = size;
+exit_no_settings:
+ dev_err(&usb_dev->dev, "couldn't read settings\n");
+exit_unlock:
+ mutex_unlock(&kone->kone_lock);
+ return retval;
+}
+
+static ssize_t kone_sysfs_show_startup_profile(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ return snprintf(buf, PAGE_SIZE, "%d\n", kone->settings.startup_profile);
+}
+
+static ssize_t kone_sysfs_set_startup_profile(struct device *dev,
+ struct device_attribute *attr, char const *buf, size_t size)
+{
+ struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
+ struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+ int retval;
+ unsigned long new_startup_profile;
+
+ retval = strict_strtoul(buf, 10, &new_startup_profile);
+ if (retval)
+ return retval;
+
+ if (new_startup_profile < 1 || new_startup_profile > 5)
+ return -EINVAL;
+
+ mutex_lock(&kone->kone_lock);
+
+ kone->settings.startup_profile = new_startup_profile;
+ kone_set_settings_checksum(&kone->settings);
+
+ retval = kone_set_settings(usb_dev, &kone->settings);
+
+ mutex_unlock(&kone->kone_lock);
+
+ if (retval)
+ return retval;
+
+ /* changing the startup profile immediately activates this profile */
+ kone->actual_profile = new_startup_profile;
+ kone->actual_dpi = kone->profiles[kone->actual_profile - 1].startup_dpi;
+
+ return size;
+}
+
+/*
+ * This file is used by userland software to find devices that are handled by
+ * this driver. This provides a consistent way for actual and older kernels
+ * where this driver replaced usbhid instead of generic-usb.
+ * Driver capabilities are determined by version number.
+ */
+static ssize_t kone_sysfs_show_driver_version(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, ROCCAT_KONE_DRIVER_VERSION "\n");
+}
+
+/*
+ * Read actual dpi settings.
+ * Returns raw value for further processing. Refer to enum kone_polling_rates to
+ * get real value.
+ */
+static DEVICE_ATTR(actual_dpi, 0440, kone_sysfs_show_actual_dpi, NULL);
+
+static DEVICE_ATTR(actual_profile, 0440, kone_sysfs_show_actual_profile, NULL);
+
+/*
+ * The mouse can be equipped with one of four supplied weights from 5 to 20
+ * grams which are recognized and its value can be read out.
+ * This returns the raw value reported by the mouse for easy evaluation by
+ * software. Refer to enum kone_weights to get corresponding real weight.
+ */
+static DEVICE_ATTR(weight, 0440, kone_sysfs_show_weight, NULL);
+
+/*
+ * Prints firmware version stored in mouse as integer.
+ * The raw value reported by the mouse is returned for easy evaluation, to get
+ * the real version number the decimal point has to be shifted 2 positions to
+ * the left. E.g. a value of 138 means 1.38.
+ */
+static DEVICE_ATTR(firmware_version, 0440,
+ kone_sysfs_show_firmware_version, NULL);
+
+/*
+ * Prints state of Tracking Control Unit as number where 0 = off and 1 = on
+ * Writing 0 deactivates tcu and writing 1 calibrates and activates the tcu
+ */
+static DEVICE_ATTR(tcu, 0660, kone_sysfs_show_tcu, kone_sysfs_set_tcu);
+
+/* Prints and takes the number of the profile the mouse starts with */
+static DEVICE_ATTR(startup_profile, 0660,
+ kone_sysfs_show_startup_profile,
+ kone_sysfs_set_startup_profile);
+
+static DEVICE_ATTR(kone_driver_version, 0440,
+ kone_sysfs_show_driver_version, NULL);
+
+static struct attribute *kone_attributes[] = {
+ &dev_attr_actual_dpi.attr,
+ &dev_attr_actual_profile.attr,
+ &dev_attr_weight.attr,
+ &dev_attr_firmware_version.attr,
+ &dev_attr_tcu.attr,
+ &dev_attr_startup_profile.attr,
+ &dev_attr_kone_driver_version.attr,
+ NULL
+};
+
+static struct attribute_group kone_attribute_group = {
+ .attrs = kone_attributes
+};
+
+static struct bin_attribute kone_settings_attr = {
+ .attr = { .name = "settings", .mode = 0660 },
+ .size = sizeof(struct kone_settings),
+ .read = kone_sysfs_read_settings,
+ .write = kone_sysfs_write_settings
+};
+
+static struct bin_attribute kone_profile1_attr = {
+ .attr = { .name = "profile1", .mode = 0660 },
+ .size = sizeof(struct kone_profile),
+ .read = kone_sysfs_read_profile1,
+ .write = kone_sysfs_write_profile1
+};
+
+static struct bin_attribute kone_profile2_attr = {
+ .attr = { .name = "profile2", .mode = 0660 },
+ .size = sizeof(struct kone_profile),
+ .read = kone_sysfs_read_profile2,
+ .write = kone_sysfs_write_profile2
+};
+
+static struct bin_attribute kone_profile3_attr = {
+ .attr = { .name = "profile3", .mode = 0660 },
+ .size = sizeof(struct kone_profile),
+ .read = kone_sysfs_read_profile3,
+ .write = kone_sysfs_write_profile3
+};
+
+static struct bin_attribute kone_profile4_attr = {
+ .attr = { .name = "profile4", .mode = 0660 },
+ .size = sizeof(struct kone_profile),
+ .read = kone_sysfs_read_profile4,
+ .write = kone_sysfs_write_profile4
+};
+
+static struct bin_attribute kone_profile5_attr = {
+ .attr = { .name = "profile5", .mode = 0660 },
+ .size = sizeof(struct kone_profile),
+ .read = kone_sysfs_read_profile5,
+ .write = kone_sysfs_write_profile5
+};
+
+static int kone_create_sysfs_attributes(struct usb_interface *intf)
+{
+ int retval;
+
+ retval = sysfs_create_group(&intf->dev.kobj, &kone_attribute_group);
+ if (retval)
+ goto exit_1;
+
+ retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_settings_attr);
+ if (retval)
+ goto exit_2;
+
+ retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile1_attr);
+ if (retval)
+ goto exit_3;
+
+ retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile2_attr);
+ if (retval)
+ goto exit_4;
+
+ retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile3_attr);
+ if (retval)
+ goto exit_5;
+
+ retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile4_attr);
+ if (retval)
+ goto exit_6;
+
+ retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile5_attr);
+ if (retval)
+ goto exit_7;
+
+ return 0;
+
+exit_7:
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile4_attr);
+exit_6:
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile3_attr);
+exit_5:
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile2_attr);
+exit_4:
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile1_attr);
+exit_3:
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_settings_attr);
+exit_2:
+ sysfs_remove_group(&intf->dev.kobj, &kone_attribute_group);
+exit_1:
+ return retval;
+}
+
+static void kone_remove_sysfs_attributes(struct usb_interface *intf)
+{
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile5_attr);
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile4_attr);
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile3_attr);
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile2_attr);
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile1_attr);
+ sysfs_remove_bin_file(&intf->dev.kobj, &kone_settings_attr);
+ sysfs_remove_group(&intf->dev.kobj, &kone_attribute_group);
+}
+
+static int kone_init_kone_device_struct(struct usb_device *usb_dev,
+ struct kone_device *kone)
+{
+ uint i;
+ int retval;
+
+ mutex_init(&kone->kone_lock);
+
+ for (i = 0; i < 5; ++i) {
+ retval = kone_get_profile(usb_dev, &kone->profiles[i], i + 1);
+ if (retval)
+ return retval;
+ }
+
+ retval = kone_get_settings(usb_dev, &kone->settings);
+ if (retval)
+ return retval;
+
+ retval = kone_get_firmware_version(usb_dev, &kone->firmware_version);
+ if (retval)
+ return retval;
+
+ kone->actual_profile = kone->settings.startup_profile;
+ kone->actual_dpi = kone->profiles[kone->actual_profile].startup_dpi;
+
+ return 0;
+}
+
+/*
+ * Since IGNORE_MOUSE quirk moved to hid-apple, there is no way to bind only to
+ * mousepart if usb_hid is compiled into the kernel and kone is compiled as
+ * module.
+ * Secial behaviour is bound only to mousepart since only mouseevents contain
+ * additional notifications.
+ */
+static int kone_init_specials(struct hid_device *hdev)
+{
+ struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+ struct usb_device *usb_dev = interface_to_usbdev(intf);
+ struct kone_device *kone;
+ int retval;
+
+ if (intf->cur_altsetting->desc.bInterfaceProtocol
+ == USB_INTERFACE_PROTOCOL_MOUSE) {
+
+ kone = kzalloc(sizeof(*kone), GFP_KERNEL);
+ if (!kone) {
+ dev_err(&hdev->dev, "can't alloc device descriptor\n");
+ return -ENOMEM;
+ }
+ hid_set_drvdata(hdev, kone);
+
+ retval = kone_init_kone_device_struct(usb_dev, kone);
+ if (retval) {
+ dev_err(&hdev->dev,
+ "couldn't init struct kone_device\n");
+ goto exit_free;
+ }
+ retval = kone_create_sysfs_attributes(intf);
+ if (retval) {
+ dev_err(&hdev->dev, "cannot create sysfs files\n");
+ goto exit_free;
+ }
+ } else {
+ hid_set_drvdata(hdev, NULL);
+ }
+
+ return 0;
+exit_free:
+ kfree(kone);
+ return retval;
+}
+
+
+static void kone_remove_specials(struct hid_device *hdev)
+{
+ struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+
+ if (intf->cur_altsetting->desc.bInterfaceProtocol
+ == USB_INTERFACE_PROTOCOL_MOUSE) {
+ kone_remove_sysfs_attributes(intf);
+ kfree(hid_get_drvdata(hdev));
+ }
+}
+
+static int kone_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int retval;
+
+ retval = hid_parse(hdev);
+ if (retval) {
+ dev_err(&hdev->dev, "parse failed\n");
+ goto exit;
+ }
+
+ retval = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (retval) {
+ dev_err(&hdev->dev, "hw start failed\n");
+ goto exit;
+ }
+
+ retval = kone_init_specials(hdev);
+ if (retval) {
+ dev_err(&hdev->dev, "couldn't install mouse\n");
+ goto exit_stop;
+ }
+
+ return 0;
+
+exit_stop:
+ hid_hw_stop(hdev);
+exit:
+ return retval;
+}
+
+static void kone_remove(struct hid_device *hdev)
+{
+ kone_remove_specials(hdev);
+ hid_hw_stop(hdev);
+}
+
+/* handle special events and keep actual profile and dpi values up to date */
+static void kone_keep_values_up_to_date(struct kone_device *kone,
+ struct kone_mouse_event const *event)
+{
+ switch (event->event) {
+ case kone_mouse_event_switch_profile:
+ case kone_mouse_event_osd_profile:
+ kone->actual_profile = event->value;
+ kone->actual_dpi = kone->profiles[kone->actual_profile - 1].
+ startup_dpi;
+ break;
+ case kone_mouse_event_switch_dpi:
+ case kone_mouse_event_osd_dpi:
+ kone->actual_dpi = event->value;
+ break;
+ }
+}
+
+/*
+ * Is called for keyboard- and mousepart.
+ * Only mousepart gets informations about special events in its extended event
+ * structure.
+ */
+static int kone_raw_event(struct hid_device *hdev, struct hid_report *report,
+ u8 *data, int size)
+{
+ struct kone_device *kone = hid_get_drvdata(hdev);
+ struct kone_mouse_event *event = (struct kone_mouse_event *)data;
+
+ /* keyboard events are always processed by default handler */
+ if (size != sizeof(struct kone_mouse_event))
+ return 0;
+
+ /*
+ * Firmware 1.38 introduced new behaviour for tilt and special buttons.
+ * Pressed button is reported in each movement event.
+ * Workaround sends only one event per press.
+ */
+ if (memcmp(&kone->last_mouse_event.tilt, &event->tilt, 5))
+ memcpy(&kone->last_mouse_event, event,
+ sizeof(struct kone_mouse_event));
+ else
+ memset(&event->tilt, 0, 5);
+
+ kone_keep_values_up_to_date(kone, event);
+
+ return 0; /* always do further processing */
+}
+
+static const struct hid_device_id kone_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(hid, kone_devices);
+
+static struct hid_driver kone_driver = {
+ .name = "kone",
+ .id_table = kone_devices,
+ .probe = kone_probe,
+ .remove = kone_remove,
+ .raw_event = kone_raw_event
+};
+
+static int __init kone_init(void)
+{
+ return hid_register_driver(&kone_driver);
+}
+
+static void __exit kone_exit(void)
+{
+ hid_unregister_driver(&kone_driver);
+}
+
+module_init(kone_init);
+module_exit(kone_exit);
+
+MODULE_AUTHOR("Stefan Achatz");
+MODULE_DESCRIPTION("USB Roccat Kone driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hid/hid-roccat-kone.h b/drivers/hid/hid-roccat-kone.h
new file mode 100644
index 0000000..b413b10
--- /dev/null
+++ b/drivers/hid/hid-roccat-kone.h
@@ -0,0 +1,224 @@
+#ifndef __HID_ROCCAT_KONE_H
+#define __HID_ROCCAT_KONE_H
+
+/*
+ * Copyright (c) 2010 Stefan Achatz <erazor_de@users.sourceforge.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/types.h>
+
+#define ROCCAT_KONE_DRIVER_VERSION "v0.3.1"
+
+#pragma pack(push)
+#pragma pack(1)
+
+struct kone_keystroke {
+ uint8_t key;
+ uint8_t action;
+ uint16_t period; /* in milliseconds */
+};
+
+enum kone_keystroke_buttons {
+ kone_keystroke_button_1 = 0xf0, /* left mouse button */
+ kone_keystroke_button_2 = 0xf1, /* right mouse button */
+ kone_keystroke_button_3 = 0xf2, /* wheel */
+ kone_keystroke_button_9 = 0xf3, /* side button up */
+ kone_keystroke_button_8 = 0xf4 /* side button down */
+};
+
+enum kone_keystroke_actions {
+ kone_keystroke_action_press = 0,
+ kone_keystroke_action_release = 1
+};
+
+struct kone_button_info {
+ uint8_t number; /* range 1-8 */
+ uint8_t type;
+ uint8_t macro_type; /* 0 = short, 1 = overlong */
+ uint8_t macro_set_name[16]; /* can be max 15 chars long */
+ uint8_t macro_name[16]; /* can be max 15 chars long */
+ uint8_t count;
+ struct kone_keystroke keystrokes[20];
+};
+
+enum kone_button_info_types {
+ /* valid button types until firmware 1.32 */
+ kone_button_info_type_button_1 = 0x1, /* click (left mouse button) */
+ kone_button_info_type_button_2 = 0x2, /* menu (right mouse button)*/
+ kone_button_info_type_button_3 = 0x3, /* scroll (wheel) */
+ kone_button_info_type_double_click = 0x4,
+ kone_button_info_type_key = 0x5,
+ kone_button_info_type_macro = 0x6,
+ kone_button_info_type_off = 0x7,
+ /* TODO clarify function and rename */
+ kone_button_info_type_osd_xy_prescaling = 0x8,
+ kone_button_info_type_osd_dpi = 0x9,
+ kone_button_info_type_osd_profile = 0xa,
+ kone_button_info_type_button_9 = 0xb, /* ie forward */
+ kone_button_info_type_button_8 = 0xc, /* ie backward */
+ kone_button_info_type_dpi_up = 0xd, /* internal */
+ kone_button_info_type_dpi_down = 0xe, /* internal */
+ kone_button_info_type_button_7 = 0xf, /* tilt left */
+ kone_button_info_type_button_6 = 0x10, /* tilt right */
+ kone_button_info_type_profile_up = 0x11, /* internal */
+ kone_button_info_type_profile_down = 0x12, /* internal */
+ /* additional valid button types since firmware 1.38 */
+ kone_button_info_type_multimedia_open_player = 0x20,
+ kone_button_info_type_multimedia_next_track = 0x21,
+ kone_button_info_type_multimedia_prev_track = 0x22,
+ kone_button_info_type_multimedia_play_pause = 0x23,
+ kone_button_info_type_multimedia_stop = 0x24,
+ kone_button_info_type_multimedia_mute = 0x25,
+ kone_button_info_type_multimedia_volume_up = 0x26,
+ kone_button_info_type_multimedia_volume_down = 0x27
+};
+
+enum kone_button_info_numbers {
+ kone_button_top = 1,
+ kone_button_wheel_tilt_left = 2,
+ kone_button_wheel_tilt_right = 3,
+ kone_button_forward = 4,
+ kone_button_backward = 5,
+ kone_button_middle = 6,
+ kone_button_plus = 7,
+ kone_button_minus = 8,
+};
+
+struct kone_light_info {
+ uint8_t number; /* number of light 1-5 */
+ uint8_t mod; /* 1 = on, 2 = off */
+ uint8_t red; /* range 0x00-0xff */
+ uint8_t green; /* range 0x00-0xff */
+ uint8_t blue; /* range 0x00-0xff */
+};
+
+struct kone_profile {
+ uint16_t size; /* always 975 */
+ uint16_t unused; /* always 0 */
+
+ /*
+ * range 1-5
+ * This number does not need to correspond with location where profile
+ * saved
+ */
+ uint8_t profile; /* range 1-5 */
+
+ uint16_t main_sensitivity; /* range 100-1000 */
+ uint8_t xy_sensitivity_enabled; /* 1 = on, 2 = off */
+ uint16_t x_sensitivity; /* range 100-1000 */
+ uint16_t y_sensitivity; /* range 100-1000 */
+ uint8_t dpi_rate; /* bit 1 = 800, ... */
+ uint8_t startup_dpi; /* range 1-6 */
+ uint8_t polling_rate; /* 1 = 125Hz, 2 = 500Hz, 3 = 1000Hz */
+ /* kone has no dcu
+ * value is always 2 in firmwares <= 1.32 and
+ * 1 in firmwares > 1.32
+ */
+ uint8_t dcu_flag;
+ uint8_t light_effect_1; /* range 1-3 */
+ uint8_t light_effect_2; /* range 1-5 */
+ uint8_t light_effect_3; /* range 1-4 */
+ uint8_t light_effect_speed; /* range 0-255 */
+
+ struct kone_light_info light_infos[5];
+ /* offset is kone_button_info_numbers - 1 */
+ struct kone_button_info button_infos[8];
+
+ uint16_t checksum; /* \brief holds checksum of struct */
+};
+
+enum kone_polling_rates {
+ kone_polling_rate_125 = 1,
+ kone_polling_rate_500 = 2,
+ kone_polling_rate_1000 = 3
+};
+
+struct kone_settings {
+ uint16_t size; /* always 36 */
+ uint8_t startup_profile; /* 1-5 */
+ uint8_t unknown1;
+ uint8_t tcu; /* 0 = off, 1 = on */
+ uint8_t unknown2[23];
+ uint8_t calibration_data[4];
+ uint8_t unknown3[2];
+ uint16_t checksum;
+};
+
+/*
+ * 12 byte mouse event read by interrupt_read
+ */
+struct kone_mouse_event {
+ uint8_t report_number; /* always 1 */
+ uint8_t button;
+ uint16_t x;
+ uint16_t y;
+ uint8_t wheel; /* up = 1, down = -1 */
+ uint8_t tilt; /* right = 1, left = -1 */
+ uint8_t unknown;
+ uint8_t event;
+ uint8_t value; /* press = 0, release = 1 */
+ uint8_t macro_key; /* 0 to 8 */
+};
+
+enum kone_mouse_events {
+ /* osd events are thought to be display on screen */
+ kone_mouse_event_osd_dpi = 0xa0,
+ kone_mouse_event_osd_profile = 0xb0,
+ /* TODO clarify meaning and occurence of kone_mouse_event_calibration */
+ kone_mouse_event_calibration = 0xc0,
+ kone_mouse_event_call_overlong_macro = 0xe0,
+ /* switch events notify if user changed values with mousebutton click */
+ kone_mouse_event_switch_dpi = 0xf0,
+ kone_mouse_event_switch_profile = 0xf1
+};
+
+enum kone_commands {
+ kone_command_profile = 0x5a,
+ kone_command_settings = 0x15a,
+ kone_command_firmware_version = 0x25a,
+ kone_command_weight = 0x45a,
+ kone_command_calibrate = 0x55a,
+ kone_command_confirm_write = 0x65a,
+ kone_command_firmware = 0xe5a
+};
+
+#pragma pack(pop)
+
+struct kone_device {
+ /*
+ * Storing actual values when we get informed about changes since there
+ * is no way of getting this information from the device on demand
+ */
+ int actual_profile, actual_dpi;
+ /* Used for neutralizing abnormal button behaviour */
+ struct kone_mouse_event last_mouse_event;
+
+ /*
+ * It's unlikely that multiple sysfs attributes are accessed at a time,
+ * so only one mutex is used to secure hardware access and profiles and
+ * settings of this struct.
+ */
+ struct mutex kone_lock;
+
+ /*
+ * Storing the data here reduces IO and ensures that data is available
+ * when its needed (E.g. interrupt handler).
+ */
+ struct kone_profile profiles[5];
+ struct kone_settings settings;
+
+ /*
+ * firmware doesn't change unless firmware update is implemented,
+ * so it's read only once
+ */
+ int firmware_version;
+};
+
+#endif
diff --git a/drivers/hid/hid-samsung.c b/drivers/hid/hid-samsung.c
index 510dd13..bda0fd6 100644
--- a/drivers/hid/hid-samsung.c
+++ b/drivers/hid/hid-samsung.c
@@ -7,6 +7,18 @@
* Copyright (c) 2006-2007 Jiri Kosina
* Copyright (c) 2007 Paul Walmsley
* Copyright (c) 2008 Jiri Slaby
+ * Copyright (c) 2010 Don Prince <dhprince.devel@yahoo.co.uk>
+ *
+ *
+ * This driver supports several HID devices:
+ *
+ * [0419:0001] Samsung IrDA remote controller (reports as Cypress USB Mouse).
+ * various hid report fixups for different variants.
+ *
+ * [0419:0600] Creative Desktop Wireless 6000 keyboard/mouse combo
+ * several key mappings used from the consumer usage page
+ * deviate from the USB HUT 1.12 standard.
+ *
*/
/*
@@ -17,14 +29,13 @@
*/
#include <linux/device.h>
+#include <linux/usb.h>
#include <linux/hid.h>
#include <linux/module.h>
#include "hid-ids.h"
/*
- * Samsung IrDA remote controller (reports as Cypress USB Mouse).
- *
* There are several variants for 0419:0001:
*
* 1. 184 byte report descriptor
@@ -43,21 +54,21 @@
* 4. 171 byte report descriptor
* Report #3 has an array field with logical range 0..1 instead of 1..3.
*/
-static inline void samsung_dev_trace(struct hid_device *hdev,
+static inline void samsung_irda_dev_trace(struct hid_device *hdev,
unsigned int rsize)
{
dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
"descriptor\n", rsize);
}
-static void samsung_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+static void samsung_irda_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int rsize)
{
if (rsize == 184 && rdesc[175] == 0x25 && rdesc[176] == 0x40 &&
rdesc[177] == 0x75 && rdesc[178] == 0x30 &&
rdesc[179] == 0x95 && rdesc[180] == 0x01 &&
rdesc[182] == 0x40) {
- samsung_dev_trace(hdev, 184);
+ samsung_irda_dev_trace(hdev, 184);
rdesc[176] = 0xff;
rdesc[178] = 0x08;
rdesc[180] = 0x06;
@@ -65,24 +76,80 @@
} else
if (rsize == 203 && rdesc[192] == 0x15 && rdesc[193] == 0x0 &&
rdesc[194] == 0x25 && rdesc[195] == 0x12) {
- samsung_dev_trace(hdev, 203);
+ samsung_irda_dev_trace(hdev, 203);
rdesc[193] = 0x1;
rdesc[195] = 0xf;
} else
if (rsize == 135 && rdesc[124] == 0x15 && rdesc[125] == 0x0 &&
rdesc[126] == 0x25 && rdesc[127] == 0x11) {
- samsung_dev_trace(hdev, 135);
+ samsung_irda_dev_trace(hdev, 135);
rdesc[125] = 0x1;
rdesc[127] = 0xe;
} else
if (rsize == 171 && rdesc[160] == 0x15 && rdesc[161] == 0x0 &&
rdesc[162] == 0x25 && rdesc[163] == 0x01) {
- samsung_dev_trace(hdev, 171);
+ samsung_irda_dev_trace(hdev, 171);
rdesc[161] = 0x1;
rdesc[163] = 0x3;
}
}
+#define samsung_kbd_mouse_map_key_clear(c) \
+ hid_map_usage_clear(hi, usage, bit, max, EV_KEY, (c))
+
+static int samsung_kbd_mouse_input_mapping(struct hid_device *hdev,
+ struct hid_input *hi, struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+ unsigned short ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+
+ if (1 != ifnum || HID_UP_CONSUMER != (usage->hid & HID_USAGE_PAGE))
+ return 0;
+
+ dbg_hid("samsung wireless keyboard/mouse input mapping event [0x%x]\n",
+ usage->hid & HID_USAGE);
+
+ switch (usage->hid & HID_USAGE) {
+ /* report 2 */
+ case 0x183: samsung_kbd_mouse_map_key_clear(KEY_MEDIA); break;
+ case 0x195: samsung_kbd_mouse_map_key_clear(KEY_EMAIL); break;
+ case 0x196: samsung_kbd_mouse_map_key_clear(KEY_CALC); break;
+ case 0x197: samsung_kbd_mouse_map_key_clear(KEY_COMPUTER); break;
+ case 0x22b: samsung_kbd_mouse_map_key_clear(KEY_SEARCH); break;
+ case 0x22c: samsung_kbd_mouse_map_key_clear(KEY_WWW); break;
+ case 0x22d: samsung_kbd_mouse_map_key_clear(KEY_BACK); break;
+ case 0x22e: samsung_kbd_mouse_map_key_clear(KEY_FORWARD); break;
+ case 0x22f: samsung_kbd_mouse_map_key_clear(KEY_FAVORITES); break;
+ case 0x230: samsung_kbd_mouse_map_key_clear(KEY_REFRESH); break;
+ case 0x231: samsung_kbd_mouse_map_key_clear(KEY_STOP); break;
+ default:
+ return 0;
+ }
+
+ return 1;
+}
+
+static void samsung_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+ unsigned int rsize)
+{
+ if (USB_DEVICE_ID_SAMSUNG_IR_REMOTE == hdev->product)
+ samsung_irda_report_fixup(hdev, rdesc, rsize);
+}
+
+static int samsung_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ int ret = 0;
+
+ if (USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE == hdev->product)
+ ret = samsung_kbd_mouse_input_mapping(hdev,
+ hi, field, usage, bit, max);
+
+ return ret;
+}
+
static int samsung_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
@@ -95,10 +162,12 @@
goto err_free;
}
- if (hdev->rsize == 184) {
- /* disable hidinput, force hiddev */
- cmask = (cmask & ~HID_CONNECT_HIDINPUT) |
- HID_CONNECT_HIDDEV_FORCE;
+ if (USB_DEVICE_ID_SAMSUNG_IR_REMOTE == hdev->product) {
+ if (hdev->rsize == 184) {
+ /* disable hidinput, force hiddev */
+ cmask = (cmask & ~HID_CONNECT_HIDINPUT) |
+ HID_CONNECT_HIDDEV_FORCE;
+ }
}
ret = hid_hw_start(hdev, cmask);
@@ -114,6 +183,7 @@
static const struct hid_device_id samsung_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) },
{ }
};
MODULE_DEVICE_TABLE(hid, samsung_devices);
@@ -122,6 +192,7 @@
.name = "samsung",
.id_table = samsung_devices,
.report_fixup = samsung_report_fixup,
+ .input_mapping = samsung_input_mapping,
.probe = samsung_probe,
};
diff --git a/drivers/hid/hid-topseed.c b/drivers/hid/hid-topseed.c
index 6925eda..2eebdcc 100644
--- a/drivers/hid/hid-topseed.c
+++ b/drivers/hid/hid-topseed.c
@@ -3,6 +3,9 @@
*
* Copyright (c) 2008 Lev Babiev
* based on hid-cherry driver
+ *
+ * Modified to also support BTC "Emprex 3009URF III Vista MCE Remote" by
+ * Wayne Thomas 2010.
*/
/*
@@ -24,23 +27,29 @@
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
- if ((usage->hid & HID_USAGE_PAGE) != 0x0ffbc0000)
+ if ((usage->hid & HID_USAGE_PAGE) != HID_UP_LOGIVENDOR)
return 0;
switch (usage->hid & HID_USAGE) {
- case 0x00d: ts_map_key_clear(KEY_HOME); break;
- case 0x024: ts_map_key_clear(KEY_MENU); break;
- case 0x025: ts_map_key_clear(KEY_TV); break;
- case 0x048: ts_map_key_clear(KEY_RED); break;
- case 0x047: ts_map_key_clear(KEY_GREEN); break;
- case 0x049: ts_map_key_clear(KEY_YELLOW); break;
- case 0x04a: ts_map_key_clear(KEY_BLUE); break;
- case 0x04b: ts_map_key_clear(KEY_ANGLE); break;
- case 0x04c: ts_map_key_clear(KEY_LANGUAGE); break;
- case 0x04d: ts_map_key_clear(KEY_SUBTITLE); break;
- case 0x031: ts_map_key_clear(KEY_AUDIO); break;
- case 0x032: ts_map_key_clear(KEY_TEXT); break;
- case 0x033: ts_map_key_clear(KEY_CHANNEL); break;
+ case 0x00d: ts_map_key_clear(KEY_MEDIA); break;
+ case 0x024: ts_map_key_clear(KEY_MENU); break;
+ case 0x025: ts_map_key_clear(KEY_TV); break;
+ case 0x031: ts_map_key_clear(KEY_AUDIO); break;
+ case 0x032: ts_map_key_clear(KEY_TEXT); break;
+ case 0x033: ts_map_key_clear(KEY_CHANNEL); break;
+ case 0x047: ts_map_key_clear(KEY_MP3); break;
+ case 0x048: ts_map_key_clear(KEY_TV2); break;
+ case 0x049: ts_map_key_clear(KEY_CAMERA); break;
+ case 0x04a: ts_map_key_clear(KEY_VIDEO); break;
+ case 0x04b: ts_map_key_clear(KEY_ANGLE); break;
+ case 0x04c: ts_map_key_clear(KEY_LANGUAGE); break;
+ case 0x04d: ts_map_key_clear(KEY_SUBTITLE); break;
+ case 0x050: ts_map_key_clear(KEY_RADIO); break;
+ case 0x05a: ts_map_key_clear(KEY_TEXT); break;
+ case 0x05b: ts_map_key_clear(KEY_RED); break;
+ case 0x05c: ts_map_key_clear(KEY_GREEN); break;
+ case 0x05d: ts_map_key_clear(KEY_YELLOW); break;
+ case 0x05e: ts_map_key_clear(KEY_BLUE); break;
default:
return 0;
}
@@ -50,6 +59,7 @@
static const struct hid_device_id ts_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) },
{ }
};
MODULE_DEVICE_TABLE(hid, ts_devices);
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
index f947d83..1e051f1 100644
--- a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@@ -22,14 +22,159 @@
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/slab.h>
+#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
+#include <linux/power_supply.h>
+#endif
#include "hid-ids.h"
struct wacom_data {
__u16 tool;
unsigned char butstate;
+ unsigned char high_speed;
+#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
+ int battery_capacity;
+ struct power_supply battery;
+ struct power_supply ac;
+#endif
};
+#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
+/*percent of battery capacity, 0 means AC online*/
+static unsigned short batcap[8] = { 1, 15, 25, 35, 50, 70, 100, 0 };
+
+static enum power_supply_property wacom_battery_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_CAPACITY
+};
+
+static enum power_supply_property wacom_ac_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE
+};
+
+static int wacom_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wacom_data *wdata = container_of(psy,
+ struct wacom_data, battery);
+ int power_state = batcap[wdata->battery_capacity];
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = 1;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ /* show 100% battery capacity when charging */
+ if (power_state == 0)
+ val->intval = 100;
+ else
+ val->intval = power_state;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int wacom_ac_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wacom_data *wdata = container_of(psy, struct wacom_data, ac);
+ int power_state = batcap[wdata->battery_capacity];
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ /* fall through */
+ case POWER_SUPPLY_PROP_ONLINE:
+ if (power_state == 0)
+ val->intval = 1;
+ else
+ val->intval = 0;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+#endif
+
+static void wacom_poke(struct hid_device *hdev, u8 speed)
+{
+ struct wacom_data *wdata = hid_get_drvdata(hdev);
+ int limit, ret;
+ char rep_data[2];
+
+ rep_data[0] = 0x03 ; rep_data[1] = 0x00;
+ limit = 3;
+ do {
+ ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
+ HID_FEATURE_REPORT);
+ } while (ret < 0 && limit-- > 0);
+
+ if (ret >= 0) {
+ if (speed == 0)
+ rep_data[0] = 0x05;
+ else
+ rep_data[0] = 0x06;
+
+ rep_data[1] = 0x00;
+ limit = 3;
+ do {
+ ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
+ HID_FEATURE_REPORT);
+ } while (ret < 0 && limit-- > 0);
+
+ if (ret >= 0) {
+ wdata->high_speed = speed;
+ return;
+ }
+ }
+
+ /*
+ * Note that if the raw queries fail, it's not a hard failure and it
+ * is safe to continue
+ */
+ dev_warn(&hdev->dev, "failed to poke device, command %d, err %d\n",
+ rep_data[0], ret);
+ return;
+}
+
+static ssize_t wacom_show_speed(struct device *dev,
+ struct device_attribute
+ *attr, char *buf)
+{
+ struct wacom_data *wdata = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%i\n", wdata->high_speed);
+}
+
+static ssize_t wacom_store_speed(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ int new_speed;
+
+ if (sscanf(buf, "%1d", &new_speed ) != 1)
+ return -EINVAL;
+
+ if (new_speed == 0 || new_speed == 1) {
+ wacom_poke(hdev, new_speed);
+ return strnlen(buf, PAGE_SIZE);
+ } else
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(speed, S_IRUGO | S_IWUGO,
+ wacom_show_speed, wacom_store_speed);
+
static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
u8 *raw_data, int size)
{
@@ -148,6 +293,12 @@
input_sync(input);
}
+#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
+ /* Store current battery capacity */
+ rw = (data[7] >> 2 & 0x07);
+ if (rw != wdata->battery_capacity)
+ wdata->battery_capacity = rw;
+#endif
return 1;
}
@@ -157,9 +308,7 @@
struct hid_input *hidinput;
struct input_dev *input;
struct wacom_data *wdata;
- char rep_data[2];
int ret;
- int limit;
wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
if (wdata == NULL) {
@@ -182,31 +331,53 @@
goto err_free;
}
- /*
- * Note that if the raw queries fail, it's not a hard failure and it
- * is safe to continue
- */
+ ret = device_create_file(&hdev->dev, &dev_attr_speed);
+ if (ret)
+ dev_warn(&hdev->dev,
+ "can't create sysfs speed attribute err: %d\n", ret);
- /* Set Wacom mode2 */
- rep_data[0] = 0x03; rep_data[1] = 0x00;
- limit = 3;
- do {
- ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
- HID_FEATURE_REPORT);
- } while (ret < 0 && limit-- > 0);
- if (ret < 0)
- dev_warn(&hdev->dev, "failed to poke device #1, %d\n", ret);
+ /* Set Wacom mode 2 with high reporting speed */
+ wacom_poke(hdev, 1);
- /* 0x06 - high reporting speed, 0x05 - low speed */
- rep_data[0] = 0x06; rep_data[1] = 0x00;
- limit = 3;
- do {
- ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
- HID_FEATURE_REPORT);
- } while (ret < 0 && limit-- > 0);
- if (ret < 0)
- dev_warn(&hdev->dev, "failed to poke device #2, %d\n", ret);
+#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
+ wdata->battery.properties = wacom_battery_props;
+ wdata->battery.num_properties = ARRAY_SIZE(wacom_battery_props);
+ wdata->battery.get_property = wacom_battery_get_property;
+ wdata->battery.name = "wacom_battery";
+ wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY;
+ wdata->battery.use_for_apm = 0;
+ ret = power_supply_register(&hdev->dev, &wdata->battery);
+ if (ret) {
+ dev_warn(&hdev->dev,
+ "can't create sysfs battery attribute, err: %d\n", ret);
+ /*
+ * battery attribute is not critical for the tablet, but if it
+ * failed then there is no need to create ac attribute
+ */
+ goto move_on;
+ }
+
+ wdata->ac.properties = wacom_ac_props;
+ wdata->ac.num_properties = ARRAY_SIZE(wacom_ac_props);
+ wdata->ac.get_property = wacom_ac_get_property;
+ wdata->ac.name = "wacom_ac";
+ wdata->ac.type = POWER_SUPPLY_TYPE_MAINS;
+ wdata->ac.use_for_apm = 0;
+
+ ret = power_supply_register(&hdev->dev, &wdata->ac);
+ if (ret) {
+ dev_warn(&hdev->dev,
+ "can't create ac battery attribute, err: %d\n", ret);
+ /*
+ * ac attribute is not critical for the tablet, but if it
+ * failed then we don't want to battery attribute to exist
+ */
+ power_supply_unregister(&wdata->battery);
+ }
+
+move_on:
+#endif
hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
input = hidinput->input;
@@ -251,13 +422,21 @@
static void wacom_remove(struct hid_device *hdev)
{
+#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
+ struct wacom_data *wdata = hid_get_drvdata(hdev);
+#endif
hid_hw_stop(hdev);
+
+#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
+ power_supply_unregister(&wdata->battery);
+ power_supply_unregister(&wdata->ac);
+#endif
kfree(hid_get_drvdata(hdev));
}
static const struct hid_device_id wacom_devices[] = {
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
-
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) },
{ }
};
MODULE_DEVICE_TABLE(hid, wacom_devices);
diff --git a/drivers/hid/hid-zydacron.c b/drivers/hid/hid-zydacron.c
new file mode 100644
index 0000000..9e8d35a
--- /dev/null
+++ b/drivers/hid/hid-zydacron.c
@@ -0,0 +1,237 @@
+/*
+* HID driver for zydacron remote control
+*
+* Copyright (c) 2010 Don Prince <dhprince.devel@yahoo.co.uk>
+*/
+
+/*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the Free
+* Software Foundation; either version 2 of the License, or (at your option)
+* any later version.
+*/
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+struct zc_device {
+ struct input_dev *input_ep81;
+ unsigned short last_key[4];
+};
+
+
+/*
+* Zydacron remote control has an invalid HID report descriptor,
+* that needs fixing before we can parse it.
+*/
+static void zc_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+ unsigned int rsize)
+{
+ if (rsize >= 253 &&
+ rdesc[0x96] == 0xbc && rdesc[0x97] == 0xff &&
+ rdesc[0xca] == 0xbc && rdesc[0xcb] == 0xff &&
+ rdesc[0xe1] == 0xbc && rdesc[0xe2] == 0xff) {
+ dev_info(&hdev->dev,
+ "fixing up zydacron remote control report "
+ "descriptor\n");
+ rdesc[0x96] = rdesc[0xca] = rdesc[0xe1] = 0x0c;
+ rdesc[0x97] = rdesc[0xcb] = rdesc[0xe2] = 0x00;
+ }
+}
+
+#define zc_map_key_clear(c) \
+ hid_map_usage_clear(hi, usage, bit, max, EV_KEY, (c))
+
+static int zc_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ int i;
+ struct zc_device *zc = hid_get_drvdata(hdev);
+ zc->input_ep81 = hi->input;
+
+ if ((usage->hid & HID_USAGE_PAGE) != HID_UP_CONSUMER)
+ return 0;
+
+ dbg_hid("zynacron input mapping event [0x%x]\n",
+ usage->hid & HID_USAGE);
+
+ switch (usage->hid & HID_USAGE) {
+ /* report 2 */
+ case 0x10:
+ zc_map_key_clear(KEY_MODE);
+ break;
+ case 0x30:
+ zc_map_key_clear(KEY_SCREEN);
+ break;
+ case 0x70:
+ zc_map_key_clear(KEY_INFO);
+ break;
+ /* report 3 */
+ case 0x04:
+ zc_map_key_clear(KEY_RADIO);
+ break;
+ /* report 4 */
+ case 0x0d:
+ zc_map_key_clear(KEY_PVR);
+ break;
+ case 0x25:
+ zc_map_key_clear(KEY_TV);
+ break;
+ case 0x47:
+ zc_map_key_clear(KEY_AUDIO);
+ break;
+ case 0x49:
+ zc_map_key_clear(KEY_AUX);
+ break;
+ case 0x4a:
+ zc_map_key_clear(KEY_VIDEO);
+ break;
+ case 0x48:
+ zc_map_key_clear(KEY_DVD);
+ break;
+ case 0x24:
+ zc_map_key_clear(KEY_MENU);
+ break;
+ case 0x32:
+ zc_map_key_clear(KEY_TEXT);
+ break;
+ default:
+ return 0;
+ }
+
+ for (i = 0; i < 4; i++)
+ zc->last_key[i] = 0;
+
+ return 1;
+}
+
+static int zc_raw_event(struct hid_device *hdev, struct hid_report *report,
+ u8 *data, int size)
+{
+ struct zc_device *zc = hid_get_drvdata(hdev);
+ int ret = 0;
+ unsigned key;
+ unsigned short index;
+
+ if (report->id == data[0]) {
+
+ /* break keys */
+ for (index = 0; index < 4; index++) {
+ key = zc->last_key[index];
+ if (key) {
+ input_event(zc->input_ep81, EV_KEY, key, 0);
+ zc->last_key[index] = 0;
+ }
+ }
+
+ key = 0;
+ switch (report->id) {
+ case 0x02:
+ case 0x03:
+ switch (data[1]) {
+ case 0x10:
+ key = KEY_MODE;
+ index = 0;
+ break;
+ case 0x30:
+ key = KEY_SCREEN;
+ index = 1;
+ break;
+ case 0x70:
+ key = KEY_INFO;
+ index = 2;
+ break;
+ case 0x04:
+ key = KEY_RADIO;
+ index = 3;
+ break;
+ }
+
+ if (key) {
+ input_event(zc->input_ep81, EV_KEY, key, 1);
+ zc->last_key[index] = key;
+ }
+
+ ret = 1;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int zc_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int ret;
+ struct zc_device *zc;
+
+ zc = kzalloc(sizeof(*zc), GFP_KERNEL);
+ if (zc == NULL) {
+ dev_err(&hdev->dev, "zydacron: can't alloc descriptor\n");
+ return -ENOMEM;
+ }
+
+ hid_set_drvdata(hdev, zc);
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ dev_err(&hdev->dev, "zydacron: parse failed\n");
+ goto err_free;
+ }
+
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (ret) {
+ dev_err(&hdev->dev, "zydacron: hw start failed\n");
+ goto err_free;
+ }
+
+ return 0;
+err_free:
+ kfree(zc);
+
+ return ret;
+}
+
+static void zc_remove(struct hid_device *hdev)
+{
+ struct zc_device *zc = hid_get_drvdata(hdev);
+
+ hid_hw_stop(hdev);
+
+ if (NULL != zc)
+ kfree(zc);
+}
+
+static const struct hid_device_id zc_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_ZYDACRON, USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, zc_devices);
+
+static struct hid_driver zc_driver = {
+ .name = "zydacron",
+ .id_table = zc_devices,
+ .report_fixup = zc_report_fixup,
+ .input_mapping = zc_input_mapping,
+ .raw_event = zc_raw_event,
+ .probe = zc_probe,
+ .remove = zc_remove,
+};
+
+static int __init zc_init(void)
+{
+ return hid_register_driver(&zc_driver);
+}
+
+static void __exit zc_exit(void)
+{
+ hid_unregister_driver(&zc_driver);
+}
+
+module_init(zc_init);
+module_exit(zc_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 6eadf1a..3ccd478 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -106,38 +106,48 @@
static ssize_t hidraw_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
{
unsigned int minor = iminor(file->f_path.dentry->d_inode);
- /* FIXME: What stops hidraw_table going NULL */
- struct hid_device *dev = hidraw_table[minor]->hid;
+ struct hid_device *dev;
__u8 *buf;
int ret = 0;
- if (!dev->hid_output_raw_report)
- return -ENODEV;
+ mutex_lock(&minors_lock);
+ dev = hidraw_table[minor]->hid;
+
+ if (!dev->hid_output_raw_report) {
+ ret = -ENODEV;
+ goto out;
+ }
if (count > HID_MAX_BUFFER_SIZE) {
printk(KERN_WARNING "hidraw: pid %d passed too large report\n",
task_pid_nr(current));
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
if (count < 2) {
printk(KERN_WARNING "hidraw: pid %d passed too short report\n",
task_pid_nr(current));
- return -EINVAL;
- }
-
- buf = kmalloc(count * sizeof(__u8), GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- if (copy_from_user(buf, buffer, count)) {
- ret = -EFAULT;
+ ret = -EINVAL;
goto out;
}
+ buf = kmalloc(count * sizeof(__u8), GFP_KERNEL);
+ if (!buf) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ if (copy_from_user(buf, buffer, count)) {
+ ret = -EFAULT;
+ goto out_free;
+ }
+
ret = dev->hid_output_raw_report(dev, buf, count, HID_OUTPUT_REPORT);
-out:
+out_free:
kfree(buf);
+out:
+ mutex_unlock(&minors_lock);
return ret;
}
@@ -165,11 +175,8 @@
goto out;
}
- lock_kernel();
mutex_lock(&minors_lock);
if (!hidraw_table[minor]) {
- printk(KERN_EMERG "hidraw device with minor %d doesn't exist\n",
- minor);
kfree(list);
err = -ENODEV;
goto out_unlock;
@@ -197,7 +204,6 @@
out_unlock:
mutex_unlock(&minors_lock);
- unlock_kernel();
out:
return err;
@@ -209,11 +215,8 @@
struct hidraw *dev;
struct hidraw_list *list = file->private_data;
- if (!hidraw_table[minor]) {
- printk(KERN_EMERG "hidraw device with minor %d doesn't exist\n",
- minor);
+ if (!hidraw_table[minor])
return -ENODEV;
- }
list_del(&list->node);
dev = hidraw_table[minor];
@@ -238,11 +241,12 @@
struct inode *inode = file->f_path.dentry->d_inode;
unsigned int minor = iminor(inode);
long ret = 0;
- /* FIXME: What stops hidraw_table going NULL */
- struct hidraw *dev = hidraw_table[minor];
+ struct hidraw *dev;
void __user *user_arg = (void __user*) arg;
- lock_kernel();
+ mutex_lock(&minors_lock);
+ dev = hidraw_table[minor];
+
switch (cmd) {
case HIDIOCGRDESCSIZE:
if (put_user(dev->hid->rsize, (int __user *)arg))
@@ -311,11 +315,11 @@
-EFAULT : len;
break;
}
- }
+ }
ret = -ENOTTY;
}
- unlock_kernel();
+ mutex_unlock(&minors_lock);
return ret;
}
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index df61975..1ebd324 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -623,6 +623,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(usbhid_wait_io);
static int hid_set_idle(struct usb_device *dev, int ifnum, int report, int idle)
{
@@ -806,16 +807,36 @@
struct usb_host_interface *interface = intf->cur_altsetting;
int ret;
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- HID_REQ_SET_REPORT,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- ((report_type + 1) << 8) | *buf,
- interface->desc.bInterfaceNumber, buf + 1, count - 1,
- USB_CTRL_SET_TIMEOUT);
-
- /* count also the report id */
- if (ret > 0)
- ret++;
+ if (usbhid->urbout) {
+ int actual_length;
+ int skipped_report_id = 0;
+ if (buf[0] == 0x0) {
+ /* Don't send the Report ID */
+ buf++;
+ count--;
+ skipped_report_id = 1;
+ }
+ ret = usb_interrupt_msg(dev, usbhid->urbout->pipe,
+ buf, count, &actual_length,
+ USB_CTRL_SET_TIMEOUT);
+ /* return the number of bytes transferred */
+ if (ret == 0) {
+ ret = actual_length;
+ /* count also the report id */
+ if (skipped_report_id)
+ ret++;
+ }
+ } else {
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ HID_REQ_SET_REPORT,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ ((report_type + 1) << 8) | *buf,
+ interface->desc.bInterfaceNumber, buf + 1, count - 1,
+ USB_CTRL_SET_TIMEOUT);
+ /* count also the report id */
+ if (ret > 0)
+ ret++;
+ }
return ret;
}
@@ -1017,12 +1038,15 @@
/* Some keyboards don't work until their LEDs have been set.
* Since BIOSes do set the LEDs, it must be safe for any device
* that supports the keyboard boot protocol.
+ * In addition, enable remote wakeup by default for all keyboard
+ * devices supporting the boot protocol.
*/
if (interface->desc.bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT &&
interface->desc.bInterfaceProtocol ==
- USB_INTERFACE_PROTOCOL_KEYBOARD)
+ USB_INTERFACE_PROTOCOL_KEYBOARD) {
usbhid_set_leds(hid);
-
+ device_set_wakeup_enable(&dev->dev, 1);
+ }
return 0;
fail:
@@ -1131,6 +1155,7 @@
hid->vendor = le16_to_cpu(dev->descriptor.idVendor);
hid->product = le16_to_cpu(dev->descriptor.idProduct);
hid->name[0] = 0;
+ hid->quirks = usbhid_lookup_quirk(hid->vendor, hid->product);
if (intf->cur_altsetting->desc.bInterfaceProtocol ==
USB_INTERFACE_PROTOCOL_MOUSE)
hid->type = HID_TYPE_USBMOUSE;
@@ -1287,6 +1312,11 @@
{
set_bit(HID_REPORTED_IDLE, &usbhid->iofl);
spin_unlock_irq(&usbhid->lock);
+ if (hid->driver && hid->driver->suspend) {
+ status = hid->driver->suspend(hid, message);
+ if (status < 0)
+ return status;
+ }
} else {
usbhid_mark_busy(usbhid);
spin_unlock_irq(&usbhid->lock);
@@ -1294,6 +1324,11 @@
}
} else {
+ if (hid->driver && hid->driver->suspend) {
+ status = hid->driver->suspend(hid, message);
+ if (status < 0)
+ return status;
+ }
spin_lock_irq(&usbhid->lock);
set_bit(HID_REPORTED_IDLE, &usbhid->iofl);
spin_unlock_irq(&usbhid->lock);
@@ -1348,6 +1383,11 @@
hid_io_error(hid);
usbhid_restart_queues(usbhid);
+ if (status >= 0 && hid->driver && hid->driver->resume) {
+ int ret = hid->driver->resume(hid);
+ if (ret < 0)
+ status = ret;
+ }
dev_dbg(&intf->dev, "resume status %d\n", status);
return 0;
}
@@ -1356,9 +1396,16 @@
{
struct hid_device *hid = usb_get_intfdata(intf);
struct usbhid_device *usbhid = hid->driver_data;
+ int status;
clear_bit(HID_REPORTED_IDLE, &usbhid->iofl);
- return hid_post_reset(intf);
+ status = hid_post_reset(intf);
+ if (status >= 0 && hid->driver && hid->driver->reset_resume) {
+ int ret = hid->driver->reset_resume(hid);
+ if (ret < 0)
+ status = ret;
+ }
+ return status;
}
#endif /* CONFIG_PM */
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 1152f9b..5ff8d32 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -33,6 +33,7 @@
{ USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_PREDATOR, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD },
+ { USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 433602a..c24d2fa 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -267,6 +267,7 @@
struct hiddev_list *list;
int res, i;
+ /* See comment in hiddev_connect() for BKL explanation */
lock_kernel();
i = iminor(inode) - HIDDEV_MINOR_BASE;
@@ -894,8 +895,22 @@
hiddev->hid = hid;
hiddev->exist = 1;
- /* when lock_kernel() usage is fixed in usb_open(),
- * we could also fix it here */
+ /*
+ * BKL here is used to avoid race after usb_register_dev().
+ * Once the device node has been created, open() could happen on it.
+ * The code below will then fail, as hiddev_table hasn't been
+ * updated.
+ *
+ * The obvious fix -- introducing mutex to guard hiddev_table[]
+ * doesn't work, as usb_open() and usb_register_dev() both take
+ * minor_rwsem, thus we'll have ABBA deadlock.
+ *
+ * Before BKL pushdown, usb_open() had been acquiring it in right
+ * order, so _open() was safe to use it to protect from this race.
+ * Now the order is different, but AB-BA deadlock still doesn't occur
+ * as BKL is dropped on schedule() (i.e. while sleeping on
+ * minor_rwsem). Fugly.
+ */
lock_kernel();
retval = usb_register_dev(usbhid->intf, &hiddev_class);
if (retval) {
diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c
index bb14c82..a948605 100644
--- a/drivers/hid/usbhid/usbkbd.c
+++ b/drivers/hid/usbhid/usbkbd.c
@@ -311,6 +311,7 @@
goto fail2;
usb_set_intfdata(iface, kbd);
+ device_set_wakeup_enable(&dev->dev, 1);
return 0;
fail2:
diff --git a/include/linux/hid.h b/include/linux/hid.h
index b1344ec..895001f 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -308,11 +308,13 @@
#define HID_QUIRK_NOTOUCH 0x00000002
#define HID_QUIRK_IGNORE 0x00000004
#define HID_QUIRK_NOGET 0x00000008
+#define HID_QUIRK_HIDDEV_FORCE 0x00000010
#define HID_QUIRK_BADPAD 0x00000020
#define HID_QUIRK_MULTI_INPUT 0x00000040
#define HID_QUIRK_SKIP_OUTPUT_REPORTS 0x00010000
#define HID_QUIRK_FULLSPEED_INTERVAL 0x10000000
#define HID_QUIRK_NO_INIT_REPORTS 0x20000000
+#define HID_QUIRK_NO_IGNORE 0x40000000
/*
* This is the global environment of the parser. This information is
@@ -589,6 +591,9 @@
* @report_fixup: called before report descriptor parsing (NULL means nop)
* @input_mapping: invoked on input registering before mapping an usage
* @input_mapped: invoked on input registering after mapping an usage
+ * @suspend: invoked on suspend (NULL means nop)
+ * @resume: invoked on resume if device was not reset (NULL means nop)
+ * @reset_resume: invoked on resume if device was reset (NULL means nop)
*
* raw_event and event should return 0 on no action performed, 1 when no
* further processing should be done and negative on error
@@ -629,6 +634,11 @@
int (*input_mapped)(struct hid_device *hdev,
struct hid_input *hidinput, struct hid_field *field,
struct hid_usage *usage, unsigned long **bit, int *max);
+#ifdef CONFIG_PM
+ int (*suspend)(struct hid_device *hdev, pm_message_t message);
+ int (*resume)(struct hid_device *hdev);
+ int (*reset_resume)(struct hid_device *hdev);
+#endif
/* private: */
struct device_driver driver;
};