| /* |
| * Intel CPU Microcode Update Driver for Linux |
| * |
| * Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk> |
| * 2006 Shaohua Li <shaohua.li@intel.com> |
| * |
| * This driver allows to upgrade microcode on Intel processors |
| * belonging to IA-32 family - PentiumPro, Pentium II, |
| * Pentium III, Xeon, Pentium 4, etc. |
| * |
| * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture |
| * Software Developer's Manual |
| * Order Number 253668 or free download from: |
| * |
| * http://developer.intel.com/Assets/PDF/manual/253668.pdf |
| * |
| * For more information, go to http://www.urbanmyth.org/microcode |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * 1.0 16 Feb 2000, Tigran Aivazian <tigran@sco.com> |
| * Initial release. |
| * 1.01 18 Feb 2000, Tigran Aivazian <tigran@sco.com> |
| * Added read() support + cleanups. |
| * 1.02 21 Feb 2000, Tigran Aivazian <tigran@sco.com> |
| * Added 'device trimming' support. open(O_WRONLY) zeroes |
| * and frees the saved copy of applied microcode. |
| * 1.03 29 Feb 2000, Tigran Aivazian <tigran@sco.com> |
| * Made to use devfs (/dev/cpu/microcode) + cleanups. |
| * 1.04 06 Jun 2000, Simon Trimmer <simon@veritas.com> |
| * Added misc device support (now uses both devfs and misc). |
| * Added MICROCODE_IOCFREE ioctl to clear memory. |
| * 1.05 09 Jun 2000, Simon Trimmer <simon@veritas.com> |
| * Messages for error cases (non Intel & no suitable microcode). |
| * 1.06 03 Aug 2000, Tigran Aivazian <tigran@veritas.com> |
| * Removed ->release(). Removed exclusive open and status bitmap. |
| * Added microcode_rwsem to serialize read()/write()/ioctl(). |
| * Removed global kernel lock usage. |
| * 1.07 07 Sep 2000, Tigran Aivazian <tigran@veritas.com> |
| * Write 0 to 0x8B msr and then cpuid before reading revision, |
| * so that it works even if there were no update done by the |
| * BIOS. Otherwise, reading from 0x8B gives junk (which happened |
| * to be 0 on my machine which is why it worked even when I |
| * disabled update by the BIOS) |
| * Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix. |
| * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and |
| * Tigran Aivazian <tigran@veritas.com> |
| * Intel Pentium 4 processor support and bugfixes. |
| * 1.09 30 Oct 2001, Tigran Aivazian <tigran@veritas.com> |
| * Bugfix for HT (Hyper-Threading) enabled processors |
| * whereby processor resources are shared by all logical processors |
| * in a single CPU package. |
| * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and |
| * Tigran Aivazian <tigran@veritas.com>, |
| * Serialize updates as required on HT processors due to |
| * speculative nature of implementation. |
| * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com> |
| * Fix the panic when writing zero-length microcode chunk. |
| * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, |
| * Jun Nakajima <jun.nakajima@intel.com> |
| * Support for the microcode updates in the new format. |
| * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com> |
| * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl |
| * because we no longer hold a copy of applied microcode |
| * in kernel memory. |
| * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com> |
| * Fix sigmatch() macro to handle old CPUs with pf == 0. |
| * Thanks to Stuart Swales for pointing out this bug. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/firmware.h> |
| #include <linux/uaccess.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/vmalloc.h> |
| |
| #include <asm/microcode.h> |
| #include <asm/processor.h> |
| #include <asm/msr.h> |
| |
| MODULE_DESCRIPTION("Microcode Update Driver"); |
| MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>"); |
| MODULE_LICENSE("GPL"); |
| |
| struct microcode_header_intel { |
| unsigned int hdrver; |
| unsigned int rev; |
| unsigned int date; |
| unsigned int sig; |
| unsigned int cksum; |
| unsigned int ldrver; |
| unsigned int pf; |
| unsigned int datasize; |
| unsigned int totalsize; |
| unsigned int reserved[3]; |
| }; |
| |
| struct microcode_intel { |
| struct microcode_header_intel hdr; |
| unsigned int bits[0]; |
| }; |
| |
| /* microcode format is extended from prescott processors */ |
| struct extended_signature { |
| unsigned int sig; |
| unsigned int pf; |
| unsigned int cksum; |
| }; |
| |
| struct extended_sigtable { |
| unsigned int count; |
| unsigned int cksum; |
| unsigned int reserved[3]; |
| struct extended_signature sigs[0]; |
| }; |
| |
| #define DEFAULT_UCODE_DATASIZE (2000) |
| #define MC_HEADER_SIZE (sizeof(struct microcode_header_intel)) |
| #define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) |
| #define EXT_HEADER_SIZE (sizeof(struct extended_sigtable)) |
| #define EXT_SIGNATURE_SIZE (sizeof(struct extended_signature)) |
| #define DWSIZE (sizeof(u32)) |
| |
| #define get_totalsize(mc) \ |
| (((struct microcode_intel *)mc)->hdr.totalsize ? \ |
| ((struct microcode_intel *)mc)->hdr.totalsize : \ |
| DEFAULT_UCODE_TOTALSIZE) |
| |
| #define get_datasize(mc) \ |
| (((struct microcode_intel *)mc)->hdr.datasize ? \ |
| ((struct microcode_intel *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE) |
| |
| #define sigmatch(s1, s2, p1, p2) \ |
| (((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0)))) |
| |
| #define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE) |
| |
| static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) |
| { |
| struct cpuinfo_x86 *c = &cpu_data(cpu_num); |
| unsigned int val[2]; |
| |
| memset(csig, 0, sizeof(*csig)); |
| |
| if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || |
| cpu_has(c, X86_FEATURE_IA64)) { |
| pr_err("CPU%d not a capable Intel processor\n", cpu_num); |
| return -1; |
| } |
| |
| csig->sig = cpuid_eax(0x00000001); |
| |
| if ((c->x86_model >= 5) || (c->x86 > 6)) { |
| /* get processor flags from MSR 0x17 */ |
| rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); |
| csig->pf = 1 << ((val[1] >> 18) & 7); |
| } |
| |
| csig->rev = c->microcode; |
| pr_info("CPU%d sig=0x%x, pf=0x%x, revision=0x%x\n", |
| cpu_num, csig->sig, csig->pf, csig->rev); |
| |
| return 0; |
| } |
| |
| static inline int update_match_cpu(struct cpu_signature *csig, int sig, int pf) |
| { |
| return (!sigmatch(sig, csig->sig, pf, csig->pf)) ? 0 : 1; |
| } |
| |
| static inline int |
| update_match_revision(struct microcode_header_intel *mc_header, int rev) |
| { |
| return (mc_header->rev <= rev) ? 0 : 1; |
| } |
| |
| static int microcode_sanity_check(void *mc) |
| { |
| unsigned long total_size, data_size, ext_table_size; |
| struct microcode_header_intel *mc_header = mc; |
| struct extended_sigtable *ext_header = NULL; |
| int sum, orig_sum, ext_sigcount = 0, i; |
| struct extended_signature *ext_sig; |
| |
| total_size = get_totalsize(mc_header); |
| data_size = get_datasize(mc_header); |
| |
| if (data_size + MC_HEADER_SIZE > total_size) { |
| pr_err("error! Bad data size in microcode data file\n"); |
| return -EINVAL; |
| } |
| |
| if (mc_header->ldrver != 1 || mc_header->hdrver != 1) { |
| pr_err("error! Unknown microcode update format\n"); |
| return -EINVAL; |
| } |
| ext_table_size = total_size - (MC_HEADER_SIZE + data_size); |
| if (ext_table_size) { |
| if ((ext_table_size < EXT_HEADER_SIZE) |
| || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) { |
| pr_err("error! Small exttable size in microcode data file\n"); |
| return -EINVAL; |
| } |
| ext_header = mc + MC_HEADER_SIZE + data_size; |
| if (ext_table_size != exttable_size(ext_header)) { |
| pr_err("error! Bad exttable size in microcode data file\n"); |
| return -EFAULT; |
| } |
| ext_sigcount = ext_header->count; |
| } |
| |
| /* check extended table checksum */ |
| if (ext_table_size) { |
| int ext_table_sum = 0; |
| int *ext_tablep = (int *)ext_header; |
| |
| i = ext_table_size / DWSIZE; |
| while (i--) |
| ext_table_sum += ext_tablep[i]; |
| if (ext_table_sum) { |
| pr_warning("aborting, bad extended signature table checksum\n"); |
| return -EINVAL; |
| } |
| } |
| |
| /* calculate the checksum */ |
| orig_sum = 0; |
| i = (MC_HEADER_SIZE + data_size) / DWSIZE; |
| while (i--) |
| orig_sum += ((int *)mc)[i]; |
| if (orig_sum) { |
| pr_err("aborting, bad checksum\n"); |
| return -EINVAL; |
| } |
| if (!ext_table_size) |
| return 0; |
| /* check extended signature checksum */ |
| for (i = 0; i < ext_sigcount; i++) { |
| ext_sig = (void *)ext_header + EXT_HEADER_SIZE + |
| EXT_SIGNATURE_SIZE * i; |
| sum = orig_sum |
| - (mc_header->sig + mc_header->pf + mc_header->cksum) |
| + (ext_sig->sig + ext_sig->pf + ext_sig->cksum); |
| if (sum) { |
| pr_err("aborting, bad checksum\n"); |
| return -EINVAL; |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * return 0 - no update found |
| * return 1 - found update |
| */ |
| static int |
| get_matching_microcode(struct cpu_signature *cpu_sig, void *mc, int rev) |
| { |
| struct microcode_header_intel *mc_header = mc; |
| struct extended_sigtable *ext_header; |
| unsigned long total_size = get_totalsize(mc_header); |
| int ext_sigcount, i; |
| struct extended_signature *ext_sig; |
| |
| if (!update_match_revision(mc_header, rev)) |
| return 0; |
| |
| if (update_match_cpu(cpu_sig, mc_header->sig, mc_header->pf)) |
| return 1; |
| |
| /* Look for ext. headers: */ |
| if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE) |
| return 0; |
| |
| ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE; |
| ext_sigcount = ext_header->count; |
| ext_sig = (void *)ext_header + EXT_HEADER_SIZE; |
| |
| for (i = 0; i < ext_sigcount; i++) { |
| if (update_match_cpu(cpu_sig, ext_sig->sig, ext_sig->pf)) |
| return 1; |
| ext_sig++; |
| } |
| return 0; |
| } |
| |
| static int apply_microcode(int cpu) |
| { |
| struct microcode_intel *mc_intel; |
| struct ucode_cpu_info *uci; |
| unsigned int val[2]; |
| int cpu_num = raw_smp_processor_id(); |
| struct cpuinfo_x86 *c = &cpu_data(cpu_num); |
| |
| uci = ucode_cpu_info + cpu; |
| mc_intel = uci->mc; |
| |
| /* We should bind the task to the CPU */ |
| BUG_ON(cpu_num != cpu); |
| |
| if (mc_intel == NULL) |
| return 0; |
| |
| /* write microcode via MSR 0x79 */ |
| wrmsr(MSR_IA32_UCODE_WRITE, |
| (unsigned long) mc_intel->bits, |
| (unsigned long) mc_intel->bits >> 16 >> 16); |
| wrmsr(MSR_IA32_UCODE_REV, 0, 0); |
| |
| /* As documented in the SDM: Do a CPUID 1 here */ |
| sync_core(); |
| |
| /* get the current revision from MSR 0x8B */ |
| rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); |
| |
| if (val[1] != mc_intel->hdr.rev) { |
| pr_err("CPU%d update to revision 0x%x failed\n", |
| cpu_num, mc_intel->hdr.rev); |
| return -1; |
| } |
| pr_info("CPU%d updated to revision 0x%x, date = %04x-%02x-%02x\n", |
| cpu_num, val[1], |
| mc_intel->hdr.date & 0xffff, |
| mc_intel->hdr.date >> 24, |
| (mc_intel->hdr.date >> 16) & 0xff); |
| |
| uci->cpu_sig.rev = val[1]; |
| c->microcode = val[1]; |
| |
| return 0; |
| } |
| |
| static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, |
| int (*get_ucode_data)(void *, const void *, size_t)) |
| { |
| struct ucode_cpu_info *uci = ucode_cpu_info + cpu; |
| u8 *ucode_ptr = data, *new_mc = NULL, *mc = NULL; |
| int new_rev = uci->cpu_sig.rev; |
| unsigned int leftover = size; |
| enum ucode_state state = UCODE_OK; |
| unsigned int curr_mc_size = 0; |
| |
| while (leftover) { |
| struct microcode_header_intel mc_header; |
| unsigned int mc_size; |
| |
| if (get_ucode_data(&mc_header, ucode_ptr, sizeof(mc_header))) |
| break; |
| |
| mc_size = get_totalsize(&mc_header); |
| if (!mc_size || mc_size > leftover) { |
| pr_err("error! Bad data in microcode data file\n"); |
| break; |
| } |
| |
| /* For performance reasons, reuse mc area when possible */ |
| if (!mc || mc_size > curr_mc_size) { |
| vfree(mc); |
| mc = vmalloc(mc_size); |
| if (!mc) |
| break; |
| curr_mc_size = mc_size; |
| } |
| |
| if (get_ucode_data(mc, ucode_ptr, mc_size) || |
| microcode_sanity_check(mc) < 0) { |
| break; |
| } |
| |
| if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) { |
| vfree(new_mc); |
| new_rev = mc_header.rev; |
| new_mc = mc; |
| mc = NULL; /* trigger new vmalloc */ |
| } |
| |
| ucode_ptr += mc_size; |
| leftover -= mc_size; |
| } |
| |
| vfree(mc); |
| |
| if (leftover) { |
| vfree(new_mc); |
| state = UCODE_ERROR; |
| goto out; |
| } |
| |
| if (!new_mc) { |
| state = UCODE_NFOUND; |
| goto out; |
| } |
| |
| vfree(uci->mc); |
| uci->mc = (struct microcode_intel *)new_mc; |
| |
| pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n", |
| cpu, new_rev, uci->cpu_sig.rev); |
| out: |
| return state; |
| } |
| |
| static int get_ucode_fw(void *to, const void *from, size_t n) |
| { |
| memcpy(to, from, n); |
| return 0; |
| } |
| |
| static enum ucode_state request_microcode_fw(int cpu, struct device *device) |
| { |
| char name[30]; |
| struct cpuinfo_x86 *c = &cpu_data(cpu); |
| const struct firmware *firmware; |
| enum ucode_state ret; |
| |
| sprintf(name, "intel-ucode/%02x-%02x-%02x", |
| c->x86, c->x86_model, c->x86_mask); |
| |
| if (request_firmware(&firmware, name, device)) { |
| pr_debug("data file %s load failed\n", name); |
| return UCODE_NFOUND; |
| } |
| |
| ret = generic_load_microcode(cpu, (void *)firmware->data, |
| firmware->size, &get_ucode_fw); |
| |
| release_firmware(firmware); |
| |
| return ret; |
| } |
| |
| static int get_ucode_user(void *to, const void *from, size_t n) |
| { |
| return copy_from_user(to, from, n); |
| } |
| |
| static enum ucode_state |
| request_microcode_user(int cpu, const void __user *buf, size_t size) |
| { |
| return generic_load_microcode(cpu, (void *)buf, size, &get_ucode_user); |
| } |
| |
| static void microcode_fini_cpu(int cpu) |
| { |
| struct ucode_cpu_info *uci = ucode_cpu_info + cpu; |
| |
| vfree(uci->mc); |
| uci->mc = NULL; |
| } |
| |
| static struct microcode_ops microcode_intel_ops = { |
| .request_microcode_user = request_microcode_user, |
| .request_microcode_fw = request_microcode_fw, |
| .collect_cpu_info = collect_cpu_info, |
| .apply_microcode = apply_microcode, |
| .microcode_fini_cpu = microcode_fini_cpu, |
| }; |
| |
| struct microcode_ops * __init init_intel_microcode(void) |
| { |
| return µcode_intel_ops; |
| } |
| |